Sband transmiter I/O modules

14dec03

I/O modules:

    TTI modules are used to connect the control computer (in the receiver room) with the gregorian dome and the high voltage Power supply building. There is 1 TTI line that goes to the dome and a second that goes to the HVPS. The modules include digital input,digital output, analog input, and analog output.
    The control computer has a 32 bit digital input and a 32 bit digital output board to read and control devices/switches local to the computer.
    The i/o modules used are:

Abbreviations Used:

Control Computer local i/o:

    The control computer has a 32 bit digital input and 32 bit digial output board that is used to read/write to switches/buttons by the computer.

Digital inp 32bits Local computer (Schematic:190105,190138)   (top)
Use dos inp(): st23=inp(0x500),st24=inp(0x501),st25=inp(0x502),st26=inp(0x503)
TTI_Pin signal_Name
 out
 status.mask
01 ops24VPwrSup J02-02 st23.1
02 opsRemoteSw J02-03 st23.2
03 opsResetPB J02-04 st23.4
04 opsUpsOnline J02-05 st23.8
05 opsKeyingPM J02-06 st23.10
06 opsKeyingAM J02-07 st23.20
07 opsKeyingOff J02-08 st23.40
08 opsKeyingExternal J02-09 st23.80
09 opsPhBalUpPB
st24.1
10 opsPhBalDwnPB
st24.2
11
st24.4
12
st24.8
13
st24.10
14
st24.20
15
st2440
16
st24.80
17
st25.1
18
st25.2
19
st25.4
20
st25.8
21
st25.10
22
st25.20
23
st25.40
24
st25.80
25 opsAlarmMutePB J02-29 st26.1
26 opsHVOnPB J02-30 st26.2
27 opsHVOffPB J08-31 st26.4
28 opsOdacpSW J02-32 st26.8
29 opsLocalSW J02-33 st26.10
30 opsCWPRRSW J02-34 st26.20
31 opsXPM??
st26.40
32 opsXAM??
st26.80

Digital out 32bits Local computer (Schematic:190105,190138)   (top)
(schematic:190105,190138)
use outp(0x510) for i/o
                                     control
TTI_Pin signal_Name
 out
 control
variable
01 opsSonAlert J01-02 [0].1
02 extModAM J01-03 [0].2
03 extModPM J01-04 [0].4
04 to 32 free


HighVoltage Power supply Building (HVPS) Modules:

    Goes from rcvr Room to power supply building.

Analog out TTI_11 XA1 hvps (Schematic: 190154 XA1)   (top
See maintMan:8-35
uses ttd(6,pinNum,value). routines:control9.c,preset.c
 
TTI_Pin signal_Name out progVariables
01 free 

02 Kly 1 MagCur  C10/11  counter[41],dac[1]
03 Kly 2 MagCur  C13/14  counter[42],dac[2]
04 Beam Voltage  C20/21  counter[43],dac[0]
05 to 8 or 16?? free 

Digital inp TTI_12 XA2 hvps (Schematic: 190154 XA2)   (top)
See mainMan: 8-34,8-36
use tti(12,19) to read.
 
TTI_Pin signal_Name out status.mask
01 HVPS breaker Proof  P3 -6  st19.1
02 HVPS contactor Proof  C31-8  st19.2
03 HVPS door Intlk  P3 -4  st19.4
04 HVPS Keep alive  P5 -6  st19.8
05 HVPS Gnd Stick Intlk  P3 -3  st19.10
06 HV oil Flt  P3 -24  st19.20
07 HVPS reset PB  A7TB4-6 st19.40
08 Gnd Switch Open Proof  P3 -8  st19.80



09 HVPS breaker Flt  P3 -21  st20.1
10 CrowBar HtLamp Proof  P3 -2  st20.2
11 CrowBar Blower Proof  P3 -1  st20.4
12 Crowbar Trig PS Proof  P3 -17  st20.8
13 Fil Cont Proof  P3 -11  st20.10
14 Kly 1 MagCont Proof  P3 -10  st20.20
15 Kly 2 MagCont Proof  P3 - 9  st20.40
16 DC Cur Ovld  P3 -12  st20.80



17 AC Cur Flt  P3 - 7  st21.1
18 Crowbar fired  P3 -1?  st21.2
19 Crowbar Triggered  P3 -16  st21.4
20 480V or Phase Flt  c1 - 8  st21.8
21 MOV (MetOxVar) Flt  P3 -13  st21.10
22 HVPS Cont Flt  P3 -20  st21.20
23 HVPS Alarm mute PB  A7TB4-2 st21.40
24 HVPS CrowBar PB  A7TB4-1 st21.80



25 CrowBar Trig FO RcvA  P3 -15  st22.1
26 CrowBar Trig FO RcvB  P3 -14  st22.2
27 EmgOff CrowBar Test  P3 -18  st22.4
28 HV on SW  A7TB4-4 st22.8
29 LocRem Select  A7TB4-5 st22.10
30 HV Raise Sw  A7TB4-3 st22.20
31 HV Lower Sw  A7TB4-3 st22.40
32 HV off Sw  A7TB4-4 st22.80

Digital out TTI_13 A3 hvps (TTI sheet 190154 XA3)   (top)
See MainMan:8-33
use tto(13,adrNum(1..16)) to Write
 
TTI_Pin signal_Name counter
01 Fire Crowbar Test
02 MOV(MetOxideVar)test
03 EmgOffTest
04 Standby (not connect?)
05 Computer Reset
06 Crowbar command
07 Filament Raise 53
08 Filament Lower 53
09 Kly 1 MagCommand
10 Kly 2 MagCommand
11 Filament Command
12 HV on Command
13 10-pps (keep alive)
14 Free
15 Started
16 Alarm (LS1)

Dome Modules:

Digital inp TTI_1 Dome (Schematic: 190162 XA01)   (top)
See MaintMan: 8-22
use tti(1,0) to read.
 
TTI_Pin signal_Name out status.mask
01 klyBodyCur FE J04-01 st0.1
02 Kly1 colCur FE J04-02 st0.2
03 Kly2 colCur FE J04-03 st0.4
04 kly1 magCur FE J04-04 st0.8
05 kly2 magCur FE J04-05 st0.10
06 kly1 magVolt FE J04-06 st0.20
07 kly2 magVolt FE J04-07 st0.40
08 kly1 vacIonCur FE J04-08 st0.80



09 kly2 vacIonCur FE J04-09 st1.1
10 not used note used st1.2
11 waveGuideArc-1 FE J04-10 st1.4
12 waveGuideArc-2 FE J04-11 st1.8
13 kly1ReflPwr FE J04-12 st1.10
14 kly2ReflPwr FE J04-13 st1.20
15 combinerReflPwr FE J04-14 st1.40
16 antReflPwr FE J04-15 st1.80



17 turnStileDL fwdPwr FE J04-16 st2.1
18 H.E. A1Fan warn J04-17 st2.2
19 H.E. A2Fan warn  J04-18 st2.4
20 H.E. A3Fan warn J04-19 st2.8
21 waterLev Warn J04-20 st2.10
22 sockWaterTemp Warn J04-21 st2.20
23 kly1 body waterTemp Warn J08-01 st2.40
24 kly2 body waterTemp Warn J08-02 st2.80



25 kly1 magWaterTemp Warn J08-03 st3.1
26 kly 2 magWaterTemp Warn J08-04 st3.2
27 kly1 col. Water Temp J08-05 st3.4
28 kly2 col. Water temp J08-06 st3.8
29 not used
st3.10
30 not used
st3.20
31 water nitrogen pres. warn J08-09 st3.40
32 water purity warn J08-10 st3.80

Digital inp TTI_2 Dome (Schematic; 190162 XA02)  (top)
See MaintMan: 8-22
use tti(2,4) to read.
 
TTI_Pin signal_Name out status.mask
01 WG Nitrogen Pres Warn  J08-11  st4.1
02 CombRefl Det Warn  J08-12  st4.2
03 AntRefl Det Warn  J08-13  st4.4
04 WaterLev Proof  J08-17  st4.8
05 Kly1ColFlow Proof  J08-18  st4.10
06 Kly2ColFlow Proof  J08-19  st4.20
07 Rf Ready  J08-07  st4.40
08 TxOutWG Flow Proof  J08-08  st4.80



09 FeedRoom Flow Proof  J08-20  st5.1
10 TxRoom Flow Proof  J08-21  st5.2
11 FeedRoom WG FlowProof  J09-03  st5.4
12 Socket Flow Proof  J09-04  st5.8
13 Kly1Body Flow Proof  J09-05  st5.10
14 Kly2Body Flow Proof  J09-06  st5.20
15 Kly1Mag Flow Proof  J09-07  st5.40
16 Kly2Mag Flow Proof  J09-08  st5.80



17 Kly1WG Flow Proof  J09-09  st6.1
18 Kly2WG Flow Proof  J09-10  st6.2
19 Kly1 VacionVolt Proof  J09-11  st6.4
20 Kly2 VacionVolt Proof  J09-12  st6.8
21 Kly1 FilCur Proof  J09-13  st6.10
22 Kly2 FilCur Proof  J09-14  st6.20
23 Kly1 FilVoltage Proof  J09-15  st6.40
24 Kly2 FilVoltage Proof  J09-16  st6.80



25 Kly1 MagCur Proof  J09-17  st7.1
26 Kly2 MagCur Proof  J09-18  st7.2
27 Kly1 MagVolt Proof  J09-19  st7.4
28 Kly2 MagVolt Proof  J09-20  st7.8
29 Beam Voltage Proof  J09-22  st7.10
30 TurnStile DL DetPR  J08-14  st7.20
31 Kly1 ReflPwr Warn  J08-15  st7.40
32 Kly2 ReflPwr Warn  J08-15  st7.80

Digial inp TTI_3  Dome (Schematic: 190162 XA03)  (top)
See MaintMan: 8-22
use tti(1,8) to read.
 
TTI_Pin signal_Name out status.mask
01 Kly 1 Selected  J03-01  st8.1
02 Kly 2 Selected  J03-02  st8.2
03 Dome Door Closed  J03-03  st8.4
04 HE disconnects  J03-04  st8.8
05 Kly 2 WgSwCombiner  J03-21  st8.10
06 Dome KeepAlive J09-01  J09-01 st8.20
07 Dome GndStick Intlk  J03-07  st8.40
08 Dome GndSwitch Open  J03-08  st8.80



09 LowNoiseAmp Intlk  J03-09  st9.1
10 Aux Rf Intlk  J03-10  st9.2
11 FeedRoom WG FlowProof  J03-11  st9.4
12 Kly 1 WgSwCombiner  J03-12  st8.8
13 FilTimerRelay Cmd  J03-13  st9.10
14 FilTimer Complete  J03-06  st9.20
15 Standby  J03-05  st9.40
16 Kly 2 WG SW D.L.  J03-22  st9.80



17 Kly1 FilCur Flt  J03-14  st10.1
18 Kly2 FilCur Flt  J03-15  st10.2
19 Kly1 FilVolt Flt  J03-16  st10.4
20 Kly2 FilVolt Flt  J03-17  st10.8
21 Waster ReflPwrB Flt  J03-18  st10.10
22 Ant ReflPwrB Flt  J03-19  st10.20
23 Kly1 ReflPwrB Flt  J03-20  st10.40
24 Kly2 ReflPwrB Flt  J02-01  st10.80



25 Kly1 MagCur Flt  J02-02  st11.1
26 Kly2 MagCur Flt  J02-03  st11.2
27 Kly1 MagVolt Flt  J02-04  st11.4
28 Kly2 MagVolt Flt  J02-05  st11.8
29 Kly1 ColCur Flt  J02-06  st11.10
30 Kly2 ColCur Flt  J02-07  st11.20
31 Kly1 vacIonCur Flt  J02-08  st11.40
32 Kly2 vacIonCur Flt  J02-09  st11.80

Digital inp TTI_4 Dome (Schematic: 190162 XA04)  (top)
See MaintMan: 8-22
use tti(4,12) to read.
 
TTI_Pin signal_Name out status.mask
01 Body Cur A  J02-10  st12.1
02 Beam Voltage  J02-11  st12.2
03 TurnStile PwrA Ovld J02-12  st12.4
04 Waster ReflPwrA Flt  J02-13  st12.8
05 Ant RelfPwrA Flt  J02-14  st12.10
06 Kly 1 WG Arc  J02-15  st12.20
07 Kly 2 WG ARc  J02-16  st12.40
08 Kly 1 ReflPwrA Flt  J02-17  st12.80



09 Kly 2 ReflPwrA Flt  J02-18  st13.1
10 Kly 1 BodyWatTemp  J02-19  st13.2
11 Kly 2 BodyOT  J02-20  st13.4
12 Kly 1 MagOT  J02-21  st13.8
13 Kly 2 MagOT  J01-01  st13.10
14 Kly 1 ColOT  J01-02  st13.20
15 Kly 2 ColOT  J01-03  st13.40
16 WasterOT J01-11  st13.80



17 Ant/Waster Select  A13TB4-1 st14.1
18 Socket OT  J01-04  st14.2
19 PhaseBalance Incr SW J06-13  st14.4
20 PhaseBalance Decr SW J06-14  st14.8
21 DriveBalance Raise SW J06-04  st14.10
22 DriveBalance Lower SW J06-05  st14.20
23 Fil Contactor Close SW J05-19  st14.40
24 Fil Contactor Open SW J05-20  st14.80



25 Fil Voltage Raise SW J05-09  st15.1
26 Fil Voltage Lower SW J05-10  st15.2
27 HV Contactor Close SW J05-12  st15.4
28 HV Contactor Open SW J05-13  st15.8
29 HV Raise SW J05-03  st15.10
30 HV Lower SW J05-04  st15.20
31 Kly 1 MagCont Close SW J05-17  st15.40
32 Kly 2 MagCont Close SW J05-18  st15.80

Digital inp TTI_5 Dome (Schematic: 190162 XA05)  (top)
See MaintMan: 8-22
use tti(5,16) to read.
 
TTI_Pin signal_Name out status.mask
01 Kly 1 MagVolt Raise SW J05-07  st16.1
02 Kly 1 MagVolt Lower SW  J05-08  st16.2
03 Mag 2 Contactor Close SW J05-15  st16.4
04 Mag 2 Contactor Open SW J05-16  st16.8
05 Kly 2 MagVolt Raise SW J05-05  st16.10
06 Kly 2 MagVolt Lower SW J05-06  st16.20
07 RF Drive on SW J06-15  st16.40
08 RF Drive Off SW J06-16  st16.80



09 RF Drive Raise SW J06-06  st17.1
10 RF Drive Lower SW J06-07  st17.2
11 WG Combiner SW J06-09  st17.4
12 WG Dummy Load SW J06-08  st17.8
13 Reset PB J05-11  st17.10
14 Control Select SW J06-10  st17.20
15 Mute PB J06-12  st17.40
16 Cooling on SW J05-21  st17.80



17 Cooling off SW J05-22 st18.1
18 Standby PB J05-14  st18.2
19 Turnstile PwrB Ovld  J01-05  st18.4
20 BodyCur B Ovld  J01-06  st18.8
21 Kly 1 WG arc  J01-07  st18.10
22 Kly 2 WG arc  J01-08  st18.20
23 Main pump Flt  J01-09  st18.40
24 WG pump Flt  J01-10  st18.80



25-32  free
st19.1

Analog Out TTI_6 Dome(Schematic:190162 XA06)  (top)
See MaintMan: 8-22
use ttd(6,pinNum,value) to write
see  routines:control9.c,preset.c
 
TTI_Pin signal_Name out progVariables
01 DomePanelMet CalorPwr  J07-07/08  counter[44],
02 Drive  J07-02/01  counter[35],dac[3]
03 Drive balance  J07-06/05  counter[36],dac[4]
04 Phase balance  J07-04/03  counter[37],dac[5]
05 Feed forward offset  J07-10/09  counter[38],dac[6]
06 Feed forward gain  J07-12/11  counter[39],dac[7]
07 to 16 free 

Analog Input TTI_7 Dome (Schematic: 190162 XA07)  (top)
See MaintMan: 8-22
use read_a_mod(1,7,datInpAr,'i') to Read.
See routine: metering
 
TTI_Pin signal_Name out meter[]
01 Kly 1 magVoltage  J10-01/14 0
02 Kly 2 magVoltage  J10-02/15 1
03 Beam Voltage  J10-03/16 2
04 Kly 1 magCur  J10-04/17 3
05 Kly 2 magCur  J10-05/18 4
06 Body Cur  J10-06/19 5
07 Kly 1 FilVoltage  J10-07/20 6
08 Kly 2 FilVoltage  J11-01/14 7



09 Kly 1 FilCur  J11-02/15 8
10 Kly 2 FilCur  J11-03/16 9
11 Kly 1 ColCur  J11-04/17 10
12 Kly 2 ColCur  J11-05/18 11
13 Kly 1 VacionCur  J11-06/19 12
14 Kly 2 VacionCur  J11-09/22 13
15 free 

16 free 

Analog Input TTI_8 Dome (Schematic: 190162 XA08)  (top)
See MaintMan: 8-22
use read_a_mod(1,8,datInpAr,'i') to read.
see routine: metering
 
TTI_Pin signal_Name out meter[]
01 Waster Fwd Power  J11-10/23 16
02 Kly 1 Fwd Power  J11-07/20 17
03 Kly 1 Refl Power  J11-08/21 18
04 Kly 2 Fwd Power  J12-01/14 19
05 Kly 2 Refl Power  J12-02/15 20
06 Waster Refl Power  J12-03/16 21
07 TurnStile Fwd Power  J12-04/17 22
08 Ant Fwd Power  J12-05/18 23



09 Ant Refl Power  J12-06/19 24
10 Kly 1 Rf Drive Power  J12-07/20 25
11 Kly 2 Rf Drive Power  J12-08/21 26
12 FlowRate Waster ??  J12-09/22 27
13 Waster temp  J12-10/23 28
14 Kly 2 Col Flow  J12-12/25 29
15 Exciter input proof  J12-11/24 30
16 free 

Digital out TTI_9 Dome (Schematic: 190162 XA09)  (top)
uses tto(9,pin,0/1) for outputing.
See maintMan:8-23

TTI_Pin signal_Name out
01 Ant/Waster select  J07-13 
02 Cooling command  J13- 2 
03 AutoTest Adr0  J13- 3 
04 AutoTest Adr1  J13- 4 
05 AutoTest Adr2  J13- 5 
06 Test T0  J13- 6 
07 Test T1  J13- 7 
08 Test T2  J13- 8 


09 Address strobe  J13- 9 
10 HVPS over current  J13-12 
11 HVPS crowbar ready  J13-11 
12 Kly 1 arc test  J13-15 
13 WaveGuide SW command  J13-13 
14 HPVS contactor  J13-14 
15 Kly 2 Arc test  J13-17 
16 RF drive command  J13-18 

Digital out TTI_10 Dome (Schematic: 190162 XA10)  (top)
uses tto(10,pinNum,0/1)
See maintMan:8-23

TTI_Pin signal_Name out
01 Crowbar fired  J13-19 
02 Computer reset  TB1- 7 
03 Alarm  J06- 3 
04 Free  TB2- 3 
05 HVPS interlocks  J13- 1 
06 Operations Fil Timer  J13-10 
07 10 pps  TB2- 5 
08 Filament Contactor  J01-15 


09 Kly 1 Mag Contactor  J01-16 
10 Kly 2 Mag Contactor  J01-17 
11 to 16 free 


<- page up
home_~phil