*IDN? 
#Reset system
*RST
#Turn off all outputs
output1 off
output2 off
source1:voltage:unit vpp
source2:voltage:unit vpp
#Clear all trigger signals
INIT:CONT:ALL OFF
#Setting Source 1 (Gating signal for external generator)
# LOAD Arbitrary waveforms from USB
mmem:load:data "USB:\OneMin0.arb"
mmem:load:data "USB:\OneMin100.arb"
mmem:load:data "USB:\OneMin75.arb"
mmem:load:data "USB:\OneMin50.arb"
mmem:load:data "USB:\OneMin25.arb"
mmem:load:data "USB:\OneMin10.arb"
# Create Squence
# First Low minute will wait until trigger to sync
# Then sequence will run for the rest of the hour
source1:data:seq #3429"simple_seq","usb:\OneMin0.arb",1,onceWaitTrig,maintain,10,"usb:\OneMin25.arb",2,repeat,maintain,10,"usb:\OneMin50.arb",2,repeat,maintain,10,"usb:\OneMin75.arb",2,repeat,maintain,10,"usb:\OneMin100.arb",2,repeat,maintain,10,"usb:\OneMin25.arb",2,repeat,maintain,10,"usb:\OneMin50.arb",2,repeat,maintain,10,"usb:\OneMin75.arb",2,repeat,maintain,10,"usb:\OneMin100.arb",2,repeat,maintain,10,"usb:\OneMin10.arb",3,repeat,maintain,10
source1:function arb
source1:function:arb simple_seq
source1:function:arb:srat 1
source1:function:arb:filt off
source1:voltage 4.5
# Not 5Vpp due to system offset
source1:voltage:offset 0
output1:load inf
#Turn outputs ON
output1 on
output2 off
trigger1:source ext
trigger2:source ext
#Initialize trigger and sync all
INIT:CONT:ALL ON
INIT:IMM:ALL