2013-Sep-25 22:14:02 BEGIN executive: CIMA executive starting ... 2013-Sep-25 22:14:02 NOTE executive: STARTING NEW CIMA SESSION 2013-Sep-25 22:14:02 INFO1 executive: Using CIMA version 3.3.11 'stable' from 2013-09-23 10:36 2013-Sep-25 22:14:02 INFO4 executive: This is an ON-LINE session 2013-Sep-25 22:14:02 INFO4 executive: This is a LOCAL session 2013-Sep-25 22:14:02 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2013-Sep-25 22:14:02 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Elliot Gonzalez' 2013-Sep-25 22:14:02 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20130925' 2013-Sep-25 22:14:03 LOG2 log_preferences: Currently applied preferences: 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(dailylog) = daily 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(offlinelog) = write 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(datawindow) = ignore 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(limitwarning) = enabled 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(wappfailure) = abort 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(helpstyle) = stay-open 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(logcolours) = full 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(displaylevel) = LOG5 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(loglevel) = LOG5 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(displayformat) = long 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(logformat) = new 2013-Sep-25 22:14:03 LOG2 log_preferences: prefs(fontsize) = 4 2013-Sep-25 22:14:03 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2013-Sep-25 22:14:03 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2013-Sep-25 22:14:03 ALERT executive: CIMA executive ready 2013-Sep-25 22:14:04 NOTE frontend: CIMA frontend ready 2013-Sep-25 22:14:05 LOG4 got_cormsg: From DATATAKING: vw% setup 2013-Sep-25 22:14:09 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2013-Sep-25 22:14:09 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2013-Sep-25 22:14:09 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2013-Sep-25 22:14:09 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2013-Sep-25 22:14:09 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Sep-25 22:14:09 NOTE select_receiver: Starting to select receiver ALFA 2013-Sep-25 22:14:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Sep-25 22:14:09 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Sep-25 22:14:09 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Sep-25 22:14:09 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Sep-25 22:14:09 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Sep-25 22:14:09 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Sep-25 22:14:09 DONE finish_task: DONE finished selecting: receiver ALFA 2013-Sep-25 22:14:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:14:09 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Sep-25 22:14:09 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% io 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% tape off 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% connectall 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:14:18 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:14:18 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:16 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2013-Sep-25 22:22:16 INFO4 CIMA-load_command_file: Loaded command file '130925.cmd' 2013-Sep-25 22:22:17 INFO1 CIMA-run_command_file: Transferring command file '130925.cmd' to executive ... 2013-Sep-25 22:22:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES7619_p1_035) < 222143 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=305.38 alfaangle=66.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_035 ra=231000.00 dec=91900.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES7619_p1_105) < 224443 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=328.60 alfaangle=45.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_105 ra=231000.00 dec=73400.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES7619_p1_103) < 230743 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=355.99 alfaangle=22.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_103 ra=231000.00 dec=73700.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES7619_p1_101) < 233043 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=25.27 alfaangle=-1.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_101 ra=231000.00 dec=74000.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(NGC7817_p1_060) < 000114 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=154.92 alfaangle=41.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_060 ra=235630.00 dec=201630.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 68 {IF LSTSLEW(NGC7817_p1_062) < 001414 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 69 {FIXEDDRIFT az=116.64 alfaangle=80.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_062 ra=235630.00 dec=201330.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 72 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 75 {IF LSTSLEW(NGC7817_p1_064) < 002714 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 76 {FIXEDDRIFT az=106.25 alfaangle=-86.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_064 ra=235630.00 dec=201030.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 79 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 82 {IF LSTSLEW(NGC7817_p1_066) < 004014 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 83 {FIXEDDRIFT az=102.09 alfaangle=-80.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_066 ra=235630.00 dec=200730.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 86 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 89 {IF LSTSLEW(NGC7817_p1_068) < 005313 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 90 {FIXEDDRIFT az=100.04 alfaangle=-77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_068 ra=235630.00 dec=200430.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 93 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 96 {IF LSTSLEW(NGC877_p1_048) < 011246 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 97 {FIXEDDRIFT az=282.91 alfaangle=89.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC877_p1_048 ra=21300.00 dec=141930.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 100 {ENDIF} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 103 {IF LSTSLEW(NGC877_p1_050) < 012546 THEN} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 104 {FIXEDDRIFT az=287.45 alfaangle=85.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC877_p1_050 ra=21300.00 dec=141630.00} 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 107 {ENDIF} 2013-Sep-25 22:22:18 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Sep-25 22:22:18 LOG4 exec_msg: From OBSERVER: run_command_file 130925.cmd 1 1 49 2013-Sep-25 22:22:19 LOG4 run_command_file: Calling 'run_command_file 130925.cmd 1 1 49' 2013-Sep-25 22:22:19 BEGIN begin_task: Starting task 'running command file '130925.cmd'' 2013-Sep-25 22:22:19 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2013-Sep-25 22:22:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130925.cmd' ...} 2013-Sep-25 22:22:19 NOTE run_command_file: Starting execution of command file '130925.cmd' from line 1 2013-Sep-25 22:22:19 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2013-Sep-25 22:22:19 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 22:22:19 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Sep-25 22:22:19 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Sep-25 22:22:19 LOG1 CIMA-check_alfa_biasmon: Current ALFA Bias monitering Status is : OFF 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Sep-25 22:22:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Sep-25 22:22:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Sep-25 22:22:21 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 22:22:21 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Sep-25 22:22:21 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Sep-25 22:22:21 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Sep-25 22:22:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Sep-25 22:22:21 INFO1 config_iflo: Selecting receiver ALFA 2013-Sep-25 22:22:21 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2013-Sep-25 22:22:21 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2013-Sep-25 22:22:21 START begin_task: Starting task 'selecting receiver ALFA' 2013-Sep-25 22:22:21 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Sep-25 22:22:21 NOTE select_receiver: Starting to select receiver ALFA 2013-Sep-25 22:22:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Sep-25 22:22:21 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Sep-25 22:22:21 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Sep-25 22:22:21 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Sep-25 22:22:21 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Sep-25 22:22:21 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Sep-25 22:22:21 INFO2 finish_task: DONE finished selecting: receiver ALFA 2013-Sep-25 22:22:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:22:22 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Sep-25 22:22:22 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Sep-25 22:22:22 START begin_task: Starting task 'waiting for receiver ALFA' 2013-Sep-25 22:22:22 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Sep-25 22:22:22 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2013-Sep-25 22:22:22 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Sep-25 22:22:22 INFO1 config_iflo: Configuring rest of the IF/LO path 2013-Sep-25 22:22:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2013-Sep-25 22:22:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:22:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:22:22 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:22:22 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2013-Sep-25 22:22:22 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:22:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:22:22 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2013-Sep-25 22:22:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:22:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: alfafb 1 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Sep-25 22:22:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Sep-25 22:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Sep-25 22:22:23 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2013-Sep-25 22:22:23 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2013-Sep-25 22:22:23 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2013-Sep-25 22:22:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Sep-25 22:22:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:22:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Sep-25 22:22:23 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: alfafb 1 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Sep-25 22:22:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2013-Sep-25 22:22:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2013-Sep-25 22:22:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2013-Sep-25 22:22:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:22:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:37 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:22:37 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Sep-25 22:22:37 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Sep-25 22:22:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Sep-25 22:22:37 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Sep-25 22:22:37 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Sep-25 22:22:37 DONE finish_task: DONE finished configuration: IF/LO path 2013-Sep-25 22:22:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:22:37 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Sep-25 22:22:37 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Sep-25 22:22:37 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Sep-25 22:22:37 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Sep-25 22:22:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Sep-25 22:22:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Sep-25 22:22:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Sep-25 22:22:37 START begin_task: Starting task 'selecting calibration port' 2013-Sep-25 22:22:37 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2013-Sep-25 22:22:37 LOG3 vw_send: To DATATAKING: calport 3 2013-Sep-25 22:22:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Sep-25 22:22:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:22:38 START begin_task: Starting task 'waiting on calport' 2013-Sep-25 22:22:38 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2013-Sep-25 22:22:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:38 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Sep-25 22:22:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:22:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:38 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:22:38 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Sep-25 22:22:38 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2013-Sep-25 22:22:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Sep-25 22:22:38 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Sep-25 22:22:38 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2013-Sep-25 22:22:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:22:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:22:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:22:38 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2013-Sep-25 22:22:38 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:22:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:22:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:22:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:22:38 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Sep-25 22:22:38 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Sep-25 22:22:39 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Sep-25 22:22:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:22:39 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Sep-25 22:22:39 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:22:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:22:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:22:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:22:39 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:22:39 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Sep-25 22:22:39 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Sep-25 22:22:39 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Sep-25 22:22:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:22:39 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Sep-25 22:22:39 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Sep-25 22:22:39 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2013-Sep-25 22:22:39 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Sep-25 22:22:40 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2013-Sep-25 22:22:40 LOG3 is_if_valid: Current source data: rising 259.7 21.7 8 - - 174 4.0 2013-Sep-25 22:22:40 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Sep-25 22:22:40 INFO5 is_if_valid: Condition parsed as: 0 2013-Sep-25 22:22:40 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2013-Sep-25 22:22:40 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2013-Sep-25 22:22:40 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2013-Sep-25 22:22:40 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2013-Sep-25 22:22:40 LOG3 is_if_valid: Current source data: up 305.8 13.6 UP - - 118 1.5 2013-Sep-25 22:22:40 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2013-Sep-25 22:22:40 INFO5 is_if_valid: Condition parsed as: 1 2013-Sep-25 22:22:40 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2013-Sep-25 22:22:40 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2013-Sep-25 22:22:40 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2013-Sep-25 22:22:40 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Sep-25 22:22:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2013-Sep-25 22:22:40 LOG3 track_source: Calling 'track_source galfasrc2 230000.0 +100000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Sep-25 22:22:40 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 22:22:40 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Sep-25 22:22:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2013-Sep-25 22:22:40 INFO1 track_source: Starting to track galfasrc2 2013-Sep-25 22:22:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2013-Sep-25 22:22:40 LOG3 vw_send: To DATATAKING: set ra 230000.0 2013-Sep-25 22:22:40 LOG3 vw_send: To DATATAKING: set dec +100000 2013-Sep-25 22:22:40 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 22:22:41 LOG3 vw_send: To DATATAKING: pnt tr 230000.0 +100000 -CJ 2013-Sep-25 22:22:41 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Sep-25 22:22:41 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 22:22:41 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Sep-25 22:22:41 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 22:22:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:22:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 22:22:41 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Sep-25 22:22:41 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2013-Sep-25 22:22:41 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Sep-25 22:22:41 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2013-Sep-25 22:22:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:22:41 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2013-Sep-25 22:22:41 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Sep-25 22:22:41 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2013-Sep-25 22:22:41 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Sep-25 22:22:41 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2013-Sep-25 22:22:41 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Sep-25 22:22:41 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Sep-25 22:22:41 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Sep-25 22:22:41 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2013-Sep-25 22:22:41 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2013-Sep-25 22:22:41 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Sep-25 22:22:41 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Sep-25 22:22:41 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Sep-25 22:22:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Sep-25 22:22:41 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Sep-25 22:22:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Sep-25 22:22:41 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 22:22:41 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 22:22:41 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2013-Sep-25 22:22:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20130925.a2048.0007.fits 2013-Sep-25 22:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2013-Sep-25 22:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Sep-25 22:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Sep-25 22:22:42 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20130925.a2048.0007.fits} 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: set ra 230000.0 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 230000.0 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: set dec +100000 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: +100000 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: pnt tr 230000.0 +100000 -CJ 2013-Sep-25 22:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Sep-25 22:22:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 22:23:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 22:23:28 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Sep-25 22:23:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 22:23:28 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2013-Sep-25 22:23:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:23:28 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Sep-25 22:23:28 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Sep-25 22:23:28 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Sep-25 22:23:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:23:28 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Sep-25 22:23:28 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Sep-25 22:23:28 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2013-Sep-25 22:23:28 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Sep-25 22:23:28 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Sep-25 22:23:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 22:23:28 LOG3 waittrk: Start waittrk 5 2013-Sep-25 22:23:28 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 22:23:28 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2013-Sep-25 22:23:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 22:23:33 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2013-Sep-25 22:23:33 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 22:23:33 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Sep-25 22:24:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 22:24:11 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Sep-25 22:24:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:24:11 INFO2 waittrk: Now tracking galfasrc2 2013-Sep-25 22:24:11 LOG4 waittrk: Current telescope position: Az = 306.41 ZA = 13.35 2013-Sep-25 22:24:11 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 22:24:11 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Sep-25 22:24:11 DONE finish_task: DONE finished waiting: telescope on source 2013-Sep-25 22:24:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:24:11 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 22:24:11 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Sep-25 22:24:11 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Sep-25 22:24:11 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Sep-25 22:24:12 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 22:24:12 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Sep-25 22:24:12 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Sep-25 22:24:12 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Sep-25 22:24:12 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2013-Sep-25 22:24:12 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Sep-25 22:24:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Sep-25 22:24:12 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 22:24:12 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2013-Sep-25 22:24:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 22:24:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 22:24:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:24:12 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 22:24:12 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2013-Sep-25 22:24:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 22:24:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:12 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:24:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 22:24:12 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2013-Sep-25 22:24:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 22:24:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:24:12 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 22:24:12 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:24:12 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Sep-25 22:24:12 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:24:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:24:12 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Sep-25 22:24:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:24:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 22:24:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:24:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:24:13 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:24:13 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Sep-25 22:24:13 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:13 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:24:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:24:13 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Sep-25 22:24:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:24:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:24:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 22:24:13 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2013-Sep-25 22:24:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:24:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:24:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:24:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:24:13 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20130925.a2048.0007.fits' is empty! 2013-Sep-25 22:24:13 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Sep-25 22:24:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-25 22:24:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Sep-25 22:24:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:24:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:24:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:24:13 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2013-Sep-25 22:24:13 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:24:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:24:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:24:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:24:13 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2013-Sep-25 22:24:13 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Sep-25 22:24:13 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 22:24:13 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Sep-25 22:24:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Sep-25 22:24:13 INFO2 adjust_power: Starting to adjust WAPP power 2013-Sep-25 22:24:13 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-25 22:24:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-25 22:24:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:24:14 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-25 22:24:14 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2013-Sep-25 22:24:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-25 22:24:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 22:24:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:16 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:24:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-25 22:24:16 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2013-Sep-25 22:24:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-25 22:24:16 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 22:24:16 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Sep-25 22:24:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 22:24:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:24:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:24:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:24:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:24:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-25 22:24:17 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2013-Sep-25 22:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-25 22:24:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-25 22:24:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-25 22:24:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-25 22:24:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 3 dB --- beam 7: 9 4 dB 2013-Sep-25 22:24:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-25 22:24:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-25 22:24:17 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2013-Sep-25 22:24:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.038 0.902 ALFA beam 1: 0.991 0.969 2013-Sep-25 22:24:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.952 1.103 ALFA beam 3: 0.960 1.063 2013-Sep-25 22:24:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.028 1.055 ALFA beam 5: 0.961 0.064 2013-Sep-25 22:24:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.873 1.017 ALFA beam 7: 0.948 0.966 2013-Sep-25 22:24:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 22:24:17 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Sep-25 22:24:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-25 22:24:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:24:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 22:24:17 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Sep-25 22:24:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 22:24:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 22:24:17 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Sep-25 22:24:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Sep-25 22:24:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:24:18 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 22:24:18 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Sep-25 22:24:18 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Sep-25 22:24:18 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-25 22:24:18 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-25 22:24:18 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:24:18 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:24:18 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:24:18 LOG2 antvel: Parameters to Doppler: Topocentric 95057 2013 268 0.0 2013-Sep-25 22:24:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:24:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-25 22:24:18 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-25 22:24:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:24:18 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:24:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:24:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Sep-25 22:24:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:24:18 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2013-Sep-25 22:24:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-25 22:24:18 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.291821 2013.7362998770502 18.999933 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000009 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 1 22.993789867219650 10.053398560032148 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 2 22.994455438698672 9.955875666281447 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 3 23.000649064317887 9.902078031384661 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 4 23.006218529909525 9.946797010377065 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 5 23.005536460189688 10.044794845697588 2013-Sep-25 22:24:18 LOG4 log_alfabeam: ALFABEAM 6 22.999301577249529 10.097597207849757 2013-Sep-25 22:24:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800157 2013-Sep-25 22:24:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:24:19 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2013-Sep-25 22:24:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:24:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:24:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-25 22:24:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8660.00 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:24:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.065 < 0.75)! 2013-Sep-25 22:24:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.902 0.991 0.969 2013-Sep-25 22:24:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.103 0.960 1.063 2013-Sep-25 22:24:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.058 0.968 0.065 2013-Sep-25 22:24:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.873 1.017 0.948 0.966 2013-Sep-25 22:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.105 (still bad) 2013-Sep-25 22:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.129 (still bad) 2013-Sep-25 22:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.102 (still bad) 2013-Sep-25 22:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.107 (still bad) 2013-Sep-25 22:24:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:24:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:24:30 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2013-Sep-25 22:24:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:24:30 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2013-Sep-25 22:24:30 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Sep-25 22:24:30 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-25 22:24:30 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-25 22:24:30 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:24:30 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:24:30 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:24:30 LOG2 antvel: Parameters to Doppler: Topocentric 95070 2013 268 0.0 2013-Sep-25 22:24:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:24:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-25 22:24:30 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-25 22:24:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:24:30 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:24:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:24:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Sep-25 22:24:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:24:31 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2013-Sep-25 22:24:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-25 22:24:31 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.295442 2013.7363002889954 18.999933 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000005 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 1 22.993798397359587 10.053614398951535 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 2 22.994448417352260 9.956069419861846 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 3 23.000633406889868 9.902055251502528 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 4 23.006210063173100 9.946581589714084 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 5 23.005543556354624 10.044603592640007 2013-Sep-25 22:24:31 LOG4 log_alfabeam: ALFABEAM 6 22.999317035042985 10.097620665585318 2013-Sep-25 22:24:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800158 2013-Sep-25 22:24:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:24:31 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2013-Sep-25 22:24:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:24:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:24:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.108 (still bad) 2013-Sep-25 22:24:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8672.00 2013-Sep-25 22:24:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:24:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.093 (still bad) 2013-Sep-25 22:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.088 (still bad) 2013-Sep-25 22:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.111 (still bad) 2013-Sep-25 22:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.087 (still bad) 2013-Sep-25 22:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.088 (still bad) 2013-Sep-25 22:24:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:24:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:24:42 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2013-Sep-25 22:24:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:24:42 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2013-Sep-25 22:24:42 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Sep-25 22:24:42 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-25 22:24:42 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-25 22:24:42 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:24:42 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:24:42 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:24:42 LOG2 antvel: Parameters to Doppler: Topocentric 95081 2013 268 0.0 2013-Sep-25 22:24:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:24:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-25 22:24:42 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-25 22:24:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:24:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:24:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:24:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Sep-25 22:24:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:24:42 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2013-Sep-25 22:24:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-25 22:24:43 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.298506 2013.7363006375642 18.999933 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999998 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 1 22.993805685674364 10.053797895955142 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 2 22.994442464925804 9.956234541806102 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 3 23.000620075832224 9.902036291761648 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 4 23.006202828936011 9.946398444782146 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 5 23.005549573097984 10.044440593931560 2013-Sep-25 22:24:43 LOG4 log_alfabeam: ALFABEAM 6 22.999330196414384 10.097640214020576 2013-Sep-25 22:24:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800159 2013-Sep-25 22:24:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:24:43 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2013-Sep-25 22:24:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:24:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:24:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-25 22:24:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8684.00 2013-Sep-25 22:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.089 (still bad) 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:24:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.089 (still bad) 2013-Sep-25 22:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-25 22:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.087 (still bad) 2013-Sep-25 22:24:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.089 (still bad) 2013-Sep-25 22:24:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:24:54 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2013-Sep-25 22:24:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:24:54 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2013-Sep-25 22:24:54 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Sep-25 22:24:54 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-25 22:24:54 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-25 22:24:54 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:24:54 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:24:54 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:24:54 LOG2 antvel: Parameters to Doppler: Topocentric 95094 2013 268 0.0 2013-Sep-25 22:24:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:24:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-25 22:24:54 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-25 22:24:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:24:54 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:24:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:24:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Sep-25 22:24:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:24:55 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2013-Sep-25 22:24:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-25 22:24:55 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.302127 2013.7363010495094 18.999933 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 9.999999999999995 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 1 22.993814382933408 10.054015769124474 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 2 22.994435417530475 9.956431077926434 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 3 23.000604223644565 9.902014267434105 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 4 23.006194196093908 9.946180985433255 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 5 23.005556697707370 10.044246575668778 2013-Sep-25 22:24:55 LOG4 log_alfabeam: ALFABEAM 6 22.999345847170620 10.097662952174453 2013-Sep-25 22:24:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800160 2013-Sep-25 22:24:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:24:55 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2013-Sep-25 22:24:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:24:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:24:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:24:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:24:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-25 22:24:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8696.00 2013-Sep-25 22:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.087 (still bad) 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:24:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.090 (still bad) 2013-Sep-25 22:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-25 22:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:25:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:25:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:25:06 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2013-Sep-25 22:25:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:25:06 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2013-Sep-25 22:25:06 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Sep-25 22:25:06 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-25 22:25:06 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-25 22:25:06 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:25:06 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:25:06 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:25:06 LOG2 antvel: Parameters to Doppler: Topocentric 95106 2013 268 0.0 2013-Sep-25 22:25:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:25:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-25 22:25:06 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-25 22:25:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:25:06 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:25:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:25:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Sep-25 22:25:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:25:06 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2013-Sep-25 22:25:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-25 22:25:07 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.305470 2013.7363014297664 18.999933 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999995 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 1 22.993822494121510 10.054217897328872 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 2 22.994428899067355 9.956613879200546 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 3 23.000589493943195 9.901994309653444 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 4 23.006186144869780 9.945979237042568 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 5 23.005563288629279 10.044066107206405 2013-Sep-25 22:25:07 LOG4 log_alfabeam: ALFABEAM 6 22.999360390042188 10.097683586640859 2013-Sep-25 22:25:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800161 2013-Sep-25 22:25:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:25:07 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2013-Sep-25 22:25:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:25:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:25:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-25 22:25:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8708.00 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:25:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 22:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.095 (still bad) 2013-Sep-25 22:25:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:25:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:25:18 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2013-Sep-25 22:25:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:25:18 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2013-Sep-25 22:25:18 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Sep-25 22:25:18 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-25 22:25:18 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-25 22:25:18 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:25:18 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:25:18 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:25:18 LOG2 antvel: Parameters to Doppler: Topocentric 95117 2013 268 0.0 2013-Sep-25 22:25:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:25:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-25 22:25:18 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-25 22:25:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:25:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:25:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:25:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Sep-25 22:25:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:25:18 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2013-Sep-25 22:25:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-25 22:25:18 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.308534 2013.7363017783355 18.999933 2013-Sep-25 22:25:18 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 10.000000000000005 2013-Sep-25 22:25:18 LOG4 log_alfabeam: ALFABEAM 1 22.993829997950165 10.054403986564004 2013-Sep-25 22:25:18 LOG4 log_alfabeam: ALFABEAM 2 22.994422914626327 9.956782575066232 2013-Sep-25 22:25:18 LOG4 log_alfabeam: ALFABEAM 3 23.000575913317743 9.901976341268293 2013-Sep-25 22:25:19 LOG4 log_alfabeam: ALFABEAM 4 23.006178696418885 9.945793493978638 2013-Sep-25 22:25:19 LOG4 log_alfabeam: ALFABEAM 5 23.005569340482484 10.043899556382312 2013-Sep-25 22:25:19 LOG4 log_alfabeam: ALFABEAM 6 22.999373798703076 10.097702190336921 2013-Sep-25 22:25:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800162 2013-Sep-25 22:25:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:25:19 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2013-Sep-25 22:25:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:25:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:25:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-25 22:25:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8720.00 2013-Sep-25 22:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:25:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:25:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.891 0.968 0.947 2013-Sep-25 22:25:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.089 0.938 1.066 2013-Sep-25 22:25:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.028 0.938 0.067 2013-Sep-25 22:25:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.866 1.055 0.940 0.985 2013-Sep-25 22:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 22:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.078 (still bad) 2013-Sep-25 22:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:25:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:25:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:25:30 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2013-Sep-25 22:25:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:25:30 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2013-Sep-25 22:25:30 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Sep-25 22:25:30 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-25 22:25:30 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-25 22:25:30 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:25:30 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:25:30 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:25:30 LOG2 antvel: Parameters to Doppler: Topocentric 95130 2013 268 0.0 2013-Sep-25 22:25:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:25:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-25 22:25:30 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-25 22:25:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:25:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:25:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:25:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Sep-25 22:25:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:25:31 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2013-Sep-25 22:25:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-25 22:25:31 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.312155 2013.7363021902806 18.999933 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000004 10.000000000000002 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 1 22.993838952598260 10.054624930933006 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 2 22.994415830249412 9.956983368097299 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 3 23.000559764334412 9.901955514432144 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 4 23.006169807735009 9.945572956240074 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 5 23.005576505774911 10.043701306813960 2013-Sep-25 22:25:31 LOG4 log_alfabeam: ALFABEAM 6 22.999389743565061 10.097723786852306 2013-Sep-25 22:25:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800163 2013-Sep-25 22:25:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:25:31 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2013-Sep-25 22:25:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:25:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:25:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-25 22:25:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8732.00 2013-Sep-25 22:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:25:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.064 (still bad) 2013-Sep-25 22:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.070 (still bad) 2013-Sep-25 22:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 22:25:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:25:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:25:42 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2013-Sep-25 22:25:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:25:42 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2013-Sep-25 22:25:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Sep-25 22:25:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-25 22:25:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-25 22:25:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:25:42 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2013-Sep-25 22:25:42 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.068 (still bad) 2013-Sep-25 22:25:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-25 22:25:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:25:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:25:42 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2013-Sep-25 22:25:42 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Sep-25 22:25:42 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-25 22:25:42 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-25 22:25:42 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:25:42 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:25:43 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:25:43 LOG2 antvel: Parameters to Doppler: Topocentric 95142 2013 268 0.0 2013-Sep-25 22:25:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:25:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-25 22:25:43 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-25 22:25:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:25:43 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:25:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:25:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Sep-25 22:25:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:25:43 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Sep-25 22:25:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Sep-25 22:25:43 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.315497 2013.7363025705376 18.999933 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000000 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 1 22.993847301523942 10.054829840323952 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 2 22.994409280447730 9.957170075601285 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 3 23.000544763334375 9.901936693105279 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 4 23.006161520193668 9.945368419701317 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 5 23.005583131471926 10.043516954888956 2013-Sep-25 22:25:43 LOG4 log_alfabeam: ALFABEAM 6 22.999404555311518 10.097743336950055 2013-Sep-25 22:25:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800164 2013-Sep-25 22:25:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:25:43 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2013-Sep-25 22:25:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:25:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:25:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-25 22:25:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8744.00 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:25:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.519 (still bad) 2013-Sep-25 22:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.519 (still bad) 2013-Sep-25 22:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.552 (still bad) 2013-Sep-25 22:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.512 (still bad) 2013-Sep-25 22:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.512 (still bad) 2013-Sep-25 22:25:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:25:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:25:54 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2013-Sep-25 22:25:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:25:54 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Sep-25 22:25:54 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Sep-25 22:25:54 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-25 22:25:54 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-25 22:25:54 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:25:54 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:25:54 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:25:54 LOG2 antvel: Parameters to Doppler: Topocentric 95154 2013 268 0.0 2013-Sep-25 22:25:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:25:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-25 22:25:54 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-25 22:25:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:25:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:25:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:25:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Sep-25 22:25:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:25:55 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2013-Sep-25 22:25:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Sep-25 22:25:55 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.318840 2013.7363029507947 18.999933 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 10.000000000000004 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 1 22.993855734725479 10.055035762973212 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 2 22.994402718145452 9.957358180445809 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 3 23.000529664767129 9.901918259646248 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 4 23.006153148881069 9.945162867593375 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 5 23.005589770872646 10.043331214039123 2013-Sep-25 22:25:55 LOG4 log_alfabeam: ALFABEAM 6 22.999419463744065 10.097762517313809 2013-Sep-25 22:25:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800165 2013-Sep-25 22:25:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:25:55 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2013-Sep-25 22:25:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:25:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:25:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:25:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-25 22:25:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8756.00 2013-Sep-25 22:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.516 (still bad) 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.492 (still bad) 2013-Sep-25 22:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.505 (still bad) 2013-Sep-25 22:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.496 (still bad) 2013-Sep-25 22:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.502 (still bad) 2013-Sep-25 22:26:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:26:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:26:06 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2013-Sep-25 22:26:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:26:06 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2013-Sep-25 22:26:06 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Sep-25 22:26:06 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-25 22:26:06 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-25 22:26:06 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:26:06 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:26:06 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:26:06 LOG2 antvel: Parameters to Doppler: Topocentric 95166 2013 268 0.0 2013-Sep-25 22:26:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:26:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-25 22:26:06 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-25 22:26:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:26:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:26:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:26:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Sep-25 22:26:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:26:06 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2013-Sep-25 22:26:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Sep-25 22:26:07 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.322182 2013.7363033310517 18.999933 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999996 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 1 22.993864248020721 10.055242577788864 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 2 22.994396147560206 9.957547580576442 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 3 23.000514477089567 9.901900233578861 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 4 23.006144697945675 9.944956420714929 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 5 23.005596419727208 10.043144184843579 2013-Sep-25 22:26:07 LOG4 log_alfabeam: ALFABEAM 6 22.999434460520977 10.097781308217881 2013-Sep-25 22:26:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800166 2013-Sep-25 22:26:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:26:07 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2013-Sep-25 22:26:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:26:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.496 (still bad) 2013-Sep-25 22:26:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-25 22:26:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8768.00 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:26:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.496 (still bad) 2013-Sep-25 22:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.491 (still bad) 2013-Sep-25 22:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.084 and 1.509 (still bad) 2013-Sep-25 22:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.497 (still bad) 2013-Sep-25 22:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.504 (still bad) 2013-Sep-25 22:26:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:26:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:26:18 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2013-Sep-25 22:26:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:26:18 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2013-Sep-25 22:26:18 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Sep-25 22:26:18 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-25 22:26:18 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-25 22:26:18 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:26:18 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:26:18 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:26:18 LOG2 antvel: Parameters to Doppler: Topocentric 95177 2013 268 0.0 2013-Sep-25 22:26:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:26:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-25 22:26:18 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-25 22:26:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:26:18 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:26:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:26:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Sep-25 22:26:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:26:18 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2013-Sep-25 22:26:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Sep-25 22:26:18 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.325246 2013.7363036796207 18.999933 2013-Sep-25 22:26:18 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000004 2013-Sep-25 22:26:18 LOG4 log_alfabeam: ALFABEAM 1 22.993872126475484 10.055433028646693 2013-Sep-25 22:26:18 LOG4 log_alfabeam: ALFABEAM 2 22.994390114794513 9.957722422113633 2013-Sep-25 22:26:18 LOG4 log_alfabeam: ALFABEAM 3 23.000500470030769 9.901884067426682 2013-Sep-25 22:26:19 LOG4 log_alfabeam: ALFABEAM 4 23.006136877096200 9.944766304935268 2013-Sep-25 22:26:19 LOG4 log_alfabeam: ALFABEAM 5 23.005602525312337 10.042971523682793 2013-Sep-25 22:26:19 LOG4 log_alfabeam: ALFABEAM 6 22.999448291837417 10.097798191746749 2013-Sep-25 22:26:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800167 2013-Sep-25 22:26:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:26:19 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2013-Sep-25 22:26:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:26:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:26:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-25 22:26:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8780.00 2013-Sep-25 22:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.497 (still bad) 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:26:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.491 (still bad) 2013-Sep-25 22:26:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.079 < 0.75)! 2013-Sep-25 22:26:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.460 1.213 1.315 1.272 2013-Sep-25 22:26:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.314 1.490 1.320 1.437 2013-Sep-25 22:26:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.435 1.453 1.306 0.079 2013-Sep-25 22:26:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.217 1.463 1.322 1.364 2013-Sep-25 22:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.523 (still bad) 2013-Sep-25 22:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.490 (still bad) 2013-Sep-25 22:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.491 (still bad) 2013-Sep-25 22:26:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:26:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:26:30 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2013-Sep-25 22:26:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:26:30 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2013-Sep-25 22:26:30 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Sep-25 22:26:30 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-25 22:26:30 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-25 22:26:30 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:26:30 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:26:30 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:26:30 LOG2 antvel: Parameters to Doppler: Topocentric 95190 2013 268 0.0 2013-Sep-25 22:26:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:26:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-25 22:26:30 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-25 22:26:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:26:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:26:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:26:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Sep-25 22:26:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:26:31 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2013-Sep-25 22:26:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Sep-25 22:26:31 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.328867 2013.7363040915659 18.999933 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000005 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 1 22.993881528527364 10.055659138930354 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 2 22.994382974887429 9.957930534803747 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 3 23.000483813973240 9.901865416463622 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 4 23.006127543658884 9.944540587784774 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 5 23.005609752600190 10.042765995883585 2013-Sep-25 22:26:31 LOG4 log_alfabeam: ALFABEAM 6 22.999464739316693 10.097817710700271 2013-Sep-25 22:26:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800168 2013-Sep-25 22:26:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:26:31 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2013-Sep-25 22:26:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:26:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:26:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8792.00 2013-Sep-25 22:26:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-25 22:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.492 (still bad) 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:26:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.483 (still bad) 2013-Sep-25 22:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.480 (still bad) 2013-Sep-25 22:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.511 (still bad) 2013-Sep-25 22:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.482 (still bad) 2013-Sep-25 22:26:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:26:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:26:42 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2013-Sep-25 22:26:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:26:42 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2013-Sep-25 22:26:42 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Sep-25 22:26:42 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-25 22:26:42 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-25 22:26:42 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:26:42 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:26:42 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:26:42 LOG2 antvel: Parameters to Doppler: Topocentric 95202 2013 268 0.0 2013-Sep-25 22:26:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:26:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-25 22:26:42 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-25 22:26:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:26:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:26:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:26:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Sep-25 22:26:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:26:42 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2013-Sep-25 22:26:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Sep-25 22:26:43 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.332209 2013.7363044718229 18.999933 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 9.999999999999996 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 1 22.993890294922082 10.055868826773484 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 2 22.994376375392125 9.958124052865969 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 3 23.000468341965867 9.901848648291342 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 4 23.006118841111896 9.944331259957407 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 5 23.005616434030735 10.042574871305026 2013-Sep-25 22:26:43 LOG4 log_alfabeam: ALFABEAM 6 22.999480017965325 10.097835299669020 2013-Sep-25 22:26:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800169 2013-Sep-25 22:26:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:26:43 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2013-Sep-25 22:26:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:26:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.486 (still bad) 2013-Sep-25 22:26:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-25 22:26:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8804.00 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.491 (still bad) 2013-Sep-25 22:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.477 (still bad) 2013-Sep-25 22:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.495 (still bad) 2013-Sep-25 22:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.479 (still bad) 2013-Sep-25 22:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.498 (still bad) 2013-Sep-25 22:26:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:26:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:26:54 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2013-Sep-25 22:26:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:26:54 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2013-Sep-25 22:26:54 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Sep-25 22:26:54 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-25 22:26:54 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-25 22:26:54 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:26:54 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73630 J 2013-Sep-25 22:26:54 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:26:54 LOG2 antvel: Parameters to Doppler: Topocentric 95214 2013 268 0.0 2013-Sep-25 22:26:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:26:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-25 22:26:54 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-25 22:26:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:26:54 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:26:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:26:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Sep-25 22:26:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:26:55 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Sep-25 22:26:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Sep-25 22:26:55 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.335552 2013.7363048520799 18.999933 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000005 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 1 22.993899150118974 10.056079539068252 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 2 22.994369764917337 9.958319023309723 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 3 23.000452769362496 9.901832312451667 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 4 23.006110050284569 9.944120904993087 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 5 23.005623127716238 10.042382302439444 2013-Sep-25 22:26:55 LOG4 log_alfabeam: ALFABEAM 6 22.999495396336485 10.097852475718369 2013-Sep-25 22:26:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800170 2013-Sep-25 22:26:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:26:55 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2013-Sep-25 22:26:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:26:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:26:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:26:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-25 22:26:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8816.00 2013-Sep-25 22:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.492 (still bad) 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:26:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.478 (still bad) 2013-Sep-25 22:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.471 (still bad) 2013-Sep-25 22:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.502 (still bad) 2013-Sep-25 22:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.479 (still bad) 2013-Sep-25 22:27:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:27:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:27:06 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2013-Sep-25 22:27:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:27:06 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Sep-25 22:27:06 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2013-Sep-25 22:27:06 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2013-Sep-25 22:27:06 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Sep-25 22:27:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:27:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:27:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:27:06 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Sep-25 22:27:06 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.477 (still bad) 2013-Sep-25 22:27:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:27:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:27:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:27:06 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Sep-25 22:27:06 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Sep-25 22:27:06 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Sep-25 22:27:06 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-25 22:27:07 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-25 22:27:07 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:27:07 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:27:07 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:27:07 LOG2 antvel: Parameters to Doppler: Topocentric 95226 2013 268 0.0 2013-Sep-25 22:27:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:27:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-25 22:27:07 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-25 22:27:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:27:07 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:27:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:27:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Sep-25 22:27:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:27:07 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2013-Sep-25 22:27:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-25 22:27:07 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.338894 2013.7363052323369 18.999933 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000000 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 1 22.993908089725750 10.056291151464279 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 2 22.994363147748892 9.958515340257005 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 3 23.000437104900822 9.901816427900846 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 4 23.006101175533939 9.943909646950434 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 5 23.005629829335518 10.042188393652914 2013-Sep-25 22:27:07 LOG4 log_alfabeam: ALFABEAM 6 22.999510865811008 10.097869219647626 2013-Sep-25 22:27:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800171 2013-Sep-25 22:27:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:27:08 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2013-Sep-25 22:27:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:27:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:27:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-25 22:27:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8829.00 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:27:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.451 (still bad) 2013-Sep-25 22:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.104 (still bad) 2013-Sep-25 22:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.094 (still bad) 2013-Sep-25 22:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.064 and 1.095 (still bad) 2013-Sep-25 22:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.092 (still bad) 2013-Sep-25 22:27:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:27:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:27:19 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2013-Sep-25 22:27:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:27:19 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2013-Sep-25 22:27:19 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Sep-25 22:27:19 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-25 22:27:19 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-25 22:27:19 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:27:19 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:27:19 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:27:19 LOG2 antvel: Parameters to Doppler: Topocentric 95239 2013 268 0.0 2013-Sep-25 22:27:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:27:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-25 22:27:19 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-25 22:27:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:27:19 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:27:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:27:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Sep-25 22:27:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:27:20 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Sep-25 22:27:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-25 22:27:20 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.342515 2013.7363056442821 18.999933 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000004 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 1 22.993917874946966 10.056521518702828 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 2 22.994355968767888 9.958729644275540 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 3 23.000420023129216 9.901799731864607 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 4 23.006091461157890 9.943679660316658 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 5 23.005637101262135 10.041976706984270 2013-Sep-25 22:27:20 LOG4 log_alfabeam: ALFABEAM 6 22.999527735402754 10.097886869024899 2013-Sep-25 22:27:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800172 2013-Sep-25 22:27:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:27:20 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2013-Sep-25 22:27:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:27:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:27:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.116 (still bad) 2013-Sep-25 22:27:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-25 22:27:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8841.00 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:27:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.065 and 1.075 (still bad) 2013-Sep-25 22:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.088 (still bad) 2013-Sep-25 22:27:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.072 < 0.75)! 2013-Sep-25 22:27:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.903 0.986 0.959 2013-Sep-25 22:27:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.077 0.947 1.064 2013-Sep-25 22:27:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.056 0.963 0.072 2013-Sep-25 22:27:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.892 1.083 0.972 1.008 2013-Sep-25 22:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.082 (still bad) 2013-Sep-25 22:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.079 (still bad) 2013-Sep-25 22:27:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:27:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:27:31 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2013-Sep-25 22:27:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:27:31 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Sep-25 22:27:31 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Sep-25 22:27:31 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-25 22:27:31 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-25 22:27:31 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:27:31 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:27:31 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:27:31 LOG2 antvel: Parameters to Doppler: Topocentric 95250 2013 268 0.0 2013-Sep-25 22:27:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:27:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-25 22:27:31 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-25 22:27:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:27:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:27:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:27:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Sep-25 22:27:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:27:31 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Sep-25 22:27:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-25 22:27:32 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.345579 2013.7363059928512 18.999933 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 9.999999999999995 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 1 22.993926236481833 10.056717335673856 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 2 22.994349886782111 9.958912291132139 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 3 23.000405479394949 9.901786030839098 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 4 23.006083160040280 9.943484162623754 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 5 23.005643263083176 10.041796281409365 2013-Sep-25 22:27:32 LOG4 log_alfabeam: ALFABEAM 6 22.999542098855180 10.097901395036159 2013-Sep-25 22:27:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800173 2013-Sep-25 22:27:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:27:32 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Sep-25 22:27:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:27:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:27:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-25 22:27:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8853.00 2013-Sep-25 22:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:27:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.081 (still bad) 2013-Sep-25 22:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.109 (still bad) 2013-Sep-25 22:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.078 (still bad) 2013-Sep-25 22:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.082 (still bad) 2013-Sep-25 22:27:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:27:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:27:43 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Sep-25 22:27:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:27:43 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Sep-25 22:27:43 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Sep-25 22:27:43 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-25 22:27:43 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-25 22:27:43 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:27:43 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:27:43 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:27:43 LOG2 antvel: Parameters to Doppler: Topocentric 95263 2013 268 0.0 2013-Sep-25 22:27:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:27:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-25 22:27:43 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-25 22:27:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:27:43 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:27:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:27:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Sep-25 22:27:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:27:44 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2013-Sep-25 22:27:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-25 22:27:44 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.349200 2013.7363064047963 18.999933 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000005 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 1 22.993936215429720 10.056949798534164 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 2 22.994342690918550 9.959129699197403 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 3 23.000388185285420 9.901770354161703 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 4 23.006073253051611 9.943252073705830 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 5 23.005650554714457 10.041581506070520 2013-Sep-25 22:27:44 LOG4 log_alfabeam: ALFABEAM 6 22.999559179037831 10.097918068586635 2013-Sep-25 22:27:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800174 2013-Sep-25 22:27:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:27:44 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2013-Sep-25 22:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 22:27:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:27:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:27:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-25 22:27:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8865.00 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:27:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.075 (still bad) 2013-Sep-25 22:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.078 (still bad) 2013-Sep-25 22:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.084 (still bad) 2013-Sep-25 22:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 22:27:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:27:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:27:55 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2013-Sep-25 22:27:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:27:55 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2013-Sep-25 22:27:55 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Sep-25 22:27:55 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-25 22:27:55 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-25 22:27:55 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:27:55 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:27:55 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:27:55 LOG2 antvel: Parameters to Doppler: Topocentric 95275 2013 268 0.0 2013-Sep-25 22:27:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:27:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-25 22:27:55 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-25 22:27:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:27:55 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:27:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:27:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Sep-25 22:27:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:27:55 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2013-Sep-25 22:27:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-25 22:27:56 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.352543 2013.7363067850533 18.999933 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999998 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 1 22.993945522888030 10.057165424117533 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 2 22.994336039966520 9.959331925859807 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 3 23.000372115898017 9.901756386576647 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 4 23.006064012568711 9.943036790020939 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 5 23.005657295462310 10.041381717266056 2013-Sep-25 22:27:56 LOG4 log_alfabeam: ALFABEAM 6 22.999575050087213 10.097932977867213 2013-Sep-25 22:27:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800175 2013-Sep-25 22:27:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:27:56 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Sep-25 22:27:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:27:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:27:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:27:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-25 22:27:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8877.00 2013-Sep-25 22:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:27:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.070 (still bad) 2013-Sep-25 22:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.086 (still bad) 2013-Sep-25 22:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 22:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 22:28:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:28:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:28:07 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Sep-25 22:28:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:28:07 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2013-Sep-25 22:28:07 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Sep-25 22:28:07 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-25 22:28:07 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-25 22:28:07 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:28:07 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:28:07 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:28:07 LOG2 antvel: Parameters to Doppler: Topocentric 95287 2013 268 0.0 2013-Sep-25 22:28:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:28:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-25 22:28:07 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-25 22:28:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:28:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:28:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:28:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Sep-25 22:28:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:28:08 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2013-Sep-25 22:28:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-25 22:28:08 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.355885 2013.7363071653103 18.999933 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999996 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 1 22.993954919356852 10.057381955646191 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 2 22.994329384147079 9.959535552404791 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 3 23.000355951857397 9.901742918495534 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 4 23.006054683577545 9.942820597001189 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 5 23.005664042391061 10.041180534720782 2013-Sep-25 22:28:08 LOG4 log_alfabeam: ALFABEAM 6 22.999591015051095 10.097947408136564 2013-Sep-25 22:28:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800176 2013-Sep-25 22:28:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:28:08 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2013-Sep-25 22:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:28:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:28:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:28:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-25 22:28:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8889.00 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 22:28:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.072 (still bad) 2013-Sep-25 22:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 22:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.069 (still bad) 2013-Sep-25 22:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.070 (still bad) 2013-Sep-25 22:28:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:28:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:28:19 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2013-Sep-25 22:28:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:28:19 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2013-Sep-25 22:28:19 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Sep-25 22:28:19 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-25 22:28:19 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-25 22:28:19 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:28:19 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:28:19 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:28:19 LOG2 antvel: Parameters to Doppler: Topocentric 95299 2013 268 0.0 2013-Sep-25 22:28:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:28:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-25 22:28:19 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-25 22:28:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:28:19 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:28:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:28:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Sep-25 22:28:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:28:19 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Sep-25 22:28:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-25 22:28:20 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.359228 2013.7363075455673 18.999933 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000004 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 1 22.993964411417718 10.057599523849083 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 2 22.994322719861024 9.959740711777089 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 3 23.000339682911761 9.901729951939393 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 4 23.006045259540141 9.942603364033852 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 5 23.005670799169632 10.040977826857937 2013-Sep-25 22:28:20 LOG4 log_alfabeam: ALFABEAM 6 22.999607084065712 10.097961358224101 2013-Sep-25 22:28:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800177 2013-Sep-25 22:28:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:28:20 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2013-Sep-25 22:28:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:28:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:28:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-25 22:28:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8901.00 2013-Sep-25 22:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.072 (still bad) 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:28:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.060 (still bad) 2013-Sep-25 22:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 22:28:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:28:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.887 0.955 0.940 2013-Sep-25 22:28:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.063 0.922 1.048 2013-Sep-25 22:28:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.013 0.914 0.067 2013-Sep-25 22:28:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.853 1.046 0.926 0.973 2013-Sep-25 22:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.069 (still bad) 2013-Sep-25 22:28:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.064 (still bad) 2013-Sep-25 22:28:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:28:31 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2013-Sep-25 22:28:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:28:31 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Sep-25 22:28:31 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Sep-25 22:28:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-25 22:28:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-25 22:28:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:28:31 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2013-Sep-25 22:28:31 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:28:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-25 22:28:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:28:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:28:31 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2013-Sep-25 22:28:31 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Sep-25 22:28:32 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-25 22:28:32 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-25 22:28:32 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:28:32 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:28:32 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:28:32 LOG2 antvel: Parameters to Doppler: Topocentric 95311 2013 268 0.0 2013-Sep-25 22:28:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:28:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-25 22:28:32 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-25 22:28:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:28:32 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:28:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:28:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Sep-25 22:28:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:28:32 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2013-Sep-25 22:28:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Sep-25 22:28:32 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.362570 2013.7363079258243 18.999933 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999998 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 1 22.993973994358466 10.057817999606470 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 2 22.994316051488340 9.959947292366126 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 3 23.000323318216527 9.901717504895601 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 4 23.006035745131136 9.942385219950415 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 5 23.005677561378015 10.040773703723422 2013-Sep-25 22:28:32 LOG4 log_alfabeam: ALFABEAM 6 22.999623248099095 10.097974809831188 2013-Sep-25 22:28:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800178 2013-Sep-25 22:28:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:28:33 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2013-Sep-25 22:28:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:28:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-25 22:28:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-25 22:28:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8914.00 2013-Sep-25 22:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:28:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.510 (still bad) 2013-Sep-25 22:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.542 (still bad) 2013-Sep-25 22:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.509 (still bad) 2013-Sep-25 22:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.512 (still bad) 2013-Sep-25 22:28:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.518 (still bad) 2013-Sep-25 22:28:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:28:44 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2013-Sep-25 22:28:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:28:44 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2013-Sep-25 22:28:44 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Sep-25 22:28:44 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-25 22:28:44 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-25 22:28:44 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:28:44 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:28:44 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:28:44 LOG2 antvel: Parameters to Doppler: Topocentric 95324 2013 268 0.0 2013-Sep-25 22:28:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:28:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-25 22:28:44 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-25 22:28:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:28:44 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:28:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:28:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Sep-25 22:28:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:28:45 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2013-Sep-25 22:28:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Sep-25 22:28:45 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.366191 2013.7363083377695 18.999933 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000004 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 1 22.993984484208760 10.058055813108091 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 2 22.994308820025488 9.960172805034146 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 3 23.000305473129657 9.901704612698706 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 4 23.006025330134037 9.942147761802225 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 5 23.005684896075113 10.040550861084526 2013-Sep-25 22:28:45 LOG4 log_alfabeam: ALFABEAM 6 22.999640874884708 10.097988814847431 2013-Sep-25 22:28:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800179 2013-Sep-25 22:28:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:28:45 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Sep-25 22:28:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:28:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-25 22:28:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-25 22:28:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8926.00 2013-Sep-25 22:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.518 (still bad) 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:28:47 LOG3 WAPP=2+3-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.507 (still bad) 2013-Sep-25 22:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.496 (still bad) 2013-Sep-25 22:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.505 (still bad) 2013-Sep-25 22:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.499 (still bad) 2013-Sep-25 22:28:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:28:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:28:56 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Sep-25 22:28:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:28:56 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2013-Sep-25 22:28:56 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Sep-25 22:28:56 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-25 22:28:56 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-25 22:28:56 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:28:56 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:28:56 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:28:56 LOG2 antvel: Parameters to Doppler: Topocentric 95336 2013 268 0.0 2013-Sep-25 22:28:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:28:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-25 22:28:56 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-25 22:28:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:28:56 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:28:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:28:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Sep-25 22:28:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:28:56 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2013-Sep-25 22:28:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Sep-25 22:28:57 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.369534 2013.7363087180267 18.999933 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000004 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 1 22.993994268466306 10.058276384045977 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 2 22.994302138290482 9.960382573024887 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 3 23.000288892006321 9.901693270029543 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 4 23.006015615540438 9.941927515136314 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 5 23.005691674580198 10.040343564870795 2013-Sep-25 22:28:57 LOG4 log_alfabeam: ALFABEAM 6 22.999657253651815 10.098001207725304 2013-Sep-25 22:28:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800180 2013-Sep-25 22:28:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:28:57 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2013-Sep-25 22:28:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:28:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-25 22:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.497 (still bad) 2013-Sep-25 22:28:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:28:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:28:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-25 22:28:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8938.00 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:28:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.490 (still bad) 2013-Sep-25 22:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.512 (still bad) 2013-Sep-25 22:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.489 (still bad) 2013-Sep-25 22:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.489 (still bad) 2013-Sep-25 22:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.499 (still bad) 2013-Sep-25 22:29:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:29:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:29:08 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2013-Sep-25 22:29:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:29:08 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2013-Sep-25 22:29:08 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Sep-25 22:29:08 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-25 22:29:08 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-25 22:29:08 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:29:08 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:29:08 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:29:08 LOG2 antvel: Parameters to Doppler: Topocentric 95348 2013 268 0.0 2013-Sep-25 22:29:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:29:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-25 22:29:08 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-25 22:29:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:29:08 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:29:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:29:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Sep-25 22:29:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:29:09 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2013-Sep-25 22:29:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Sep-25 22:29:09 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.372876 2013.7363090982838 18.999933 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000002 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 1 22.994004146551546 10.058497864180316 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 2 22.994295453745341 9.960593795458605 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 3 23.000272213450490 9.901682478912424 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 4 23.006005807636548 9.941706355436112 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 5 23.005698457285124 10.040134819828504 2013-Sep-25 22:29:09 LOG4 log_alfabeam: ALFABEAM 6 22.999673729134603 10.098013070934593 2013-Sep-25 22:29:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800181 2013-Sep-25 22:29:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:29:09 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2013-Sep-25 22:29:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:29:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-25 22:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.490 (still bad) 2013-Sep-25 22:29:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-25 22:29:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8950.00 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:29:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.484 (still bad) 2013-Sep-25 22:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.509 (still bad) 2013-Sep-25 22:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.483 (still bad) 2013-Sep-25 22:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.490 (still bad) 2013-Sep-25 22:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.494 (still bad) 2013-Sep-25 22:29:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:29:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:29:20 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2013-Sep-25 22:29:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:29:20 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2013-Sep-25 22:29:20 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Sep-25 22:29:20 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-25 22:29:20 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-25 22:29:20 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:29:20 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:29:20 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:29:20 LOG2 antvel: Parameters to Doppler: Topocentric 95360 2013 268 0.0 2013-Sep-25 22:29:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:29:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-25 22:29:20 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-25 22:29:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:29:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:29:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:29:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Sep-25 22:29:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:29:20 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2013-Sep-25 22:29:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Sep-25 22:29:21 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.376219 2013.7363094785408 18.999933 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 9.999999999999998 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 1 22.994014125378516 10.058720386648170 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 2 22.994288762822027 9.960806610056181 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 3 23.000255426906875 9.901672243766418 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 4 23.005995899553412 9.941484149662625 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 5 23.005705247832395 10.039924489606507 2013-Sep-25 22:29:21 LOG4 log_alfabeam: ALFABEAM 6 22.999690311771644 10.098024400986006 2013-Sep-25 22:29:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800182 2013-Sep-25 22:29:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:29:21 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2013-Sep-25 22:29:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:29:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-25 22:29:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-25 22:29:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8962.00 2013-Sep-25 22:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.485 (still bad) 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.474 (still bad) 2013-Sep-25 22:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.502 (still bad) 2013-Sep-25 22:29:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.081 < 0.75)! 2013-Sep-25 22:29:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.448 1.212 1.305 1.270 2013-Sep-25 22:29:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.302 1.477 1.296 1.430 2013-Sep-25 22:29:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.433 1.430 1.318 0.081 2013-Sep-25 22:29:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.200 1.455 1.304 1.357 2013-Sep-25 22:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.483 (still bad) 2013-Sep-25 22:29:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:29:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:29:32 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2013-Sep-25 22:29:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:29:32 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2013-Sep-25 22:29:32 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Sep-25 22:29:32 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-25 22:29:32 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-25 22:29:32 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:29:32 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:29:32 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:29:32 LOG2 antvel: Parameters to Doppler: Topocentric 95372 2013 268 0.0 2013-Sep-25 22:29:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:29:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-25 22:29:32 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-25 22:29:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:29:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:29:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:29:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Sep-25 22:29:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:29:33 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Sep-25 22:29:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Sep-25 22:29:33 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.379561 2013.7363098587978 18.999933 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000000 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 1 22.994024199988065 10.058943818797260 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 2 22.994282069965635 9.961020900850693 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 3 23.000238541845736 9.901662581749202 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 4 23.005985896210870 9.941261030183547 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 5 23.005712041733165 10.039712688568819 2013-Sep-25 22:29:33 LOG4 log_alfabeam: ALFABEAM 6 22.999706992219728 10.098035180357481 2013-Sep-25 22:29:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800183 2013-Sep-25 22:29:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:29:33 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2013-Sep-25 22:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.484 (still bad) 2013-Sep-25 22:29:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:29:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-25 22:29:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-25 22:29:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8974.00 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:29:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.480 (still bad) 2013-Sep-25 22:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.487 (still bad) 2013-Sep-25 22:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.477 (still bad) 2013-Sep-25 22:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.481 (still bad) 2013-Sep-25 22:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.477 (still bad) 2013-Sep-25 22:29:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:29:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:29:44 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2013-Sep-25 22:29:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:29:44 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Sep-25 22:29:44 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Sep-25 22:29:44 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-25 22:29:44 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-25 22:29:44 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:29:44 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:29:44 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:29:44 LOG2 antvel: Parameters to Doppler: Topocentric 95384 2013 268 0.0 2013-Sep-25 22:29:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:29:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-25 22:29:44 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-25 22:29:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:29:44 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:29:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:29:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Sep-25 22:29:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-25 22:29:44 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2013-Sep-25 22:29:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Sep-25 22:29:44 LOG5 log_alfabeam: Parameters: 23.0 10.0 22.382903 2013.7363102390548 18.999933 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000002 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 1 22.994034374369829 10.059168227398940 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 2 22.994275373627499 9.961236742661988 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 3 23.000221552690245 9.901653500909946 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 4 23.005975793643383 9.941036930226142 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 5 23.005718840581633 10.039499342517315 2013-Sep-25 22:29:45 LOG4 log_alfabeam: ALFABEAM 6 22.999723776000163 10.098045401617213 2013-Sep-25 22:29:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326800184 2013-Sep-25 22:29:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-25 22:29:45 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2013-Sep-25 22:29:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:29:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-25 22:29:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-25 22:29:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8986.00 2013-Sep-25 22:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.474 (still bad) 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:29:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.467 (still bad) 2013-Sep-25 22:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.503 (still bad) 2013-Sep-25 22:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.473 (still bad) 2013-Sep-25 22:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.482 (still bad) 2013-Sep-25 22:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.485 (still bad) 2013-Sep-25 22:29:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:29:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-25 22:29:56 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2013-Sep-25 22:29:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-25 22:29:56 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2013-Sep-25 22:29:56 INFO2 smartfreq: Switching off CAL 2013-Sep-25 22:29:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:29:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:29:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:29:56 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2013-Sep-25 22:29:56 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:29:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:29:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:29:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:29:56 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2013-Sep-25 22:29:56 INFO3 restore_frequencies: Restoring original frequencies 2013-Sep-25 22:29:56 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-25 22:29:56 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:29:57 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:29:57 LOG2 antvel: Parameters to Doppler: Topocentric 95396 2013 268 0.0 2013-Sep-25 22:29:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:29:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Sep-25 22:29:57 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Sep-25 22:29:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:29:57 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:29:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-25 22:29:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:57 STOP finish_task: Finishing task 'smart frequency switching' 2013-Sep-25 22:29:57 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Sep-25 22:29:57 DONE finish_task: DONE finished pattern: smart frequency switching 2013-Sep-25 22:29:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:29:57 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2013-Sep-25 22:29:57 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Sep-25 22:29:57 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock_cima33.conf' 2013-Sep-25 22:29:57 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Sep-25 22:29:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-25 22:29:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 22:29:57 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Sep-25 22:29:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:29:57 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2013-Sep-25 22:29:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2013-Sep-25 22:29:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:29:57 LOG1 CIMA-check_alfa_biasmon: Current ALFA Bias monitering Status is : OFF 2013-Sep-25 22:29:57 LOG2 CIMA-antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73631 J 2013-Sep-25 22:29:57 LOG2 CIMA-antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:41.0 2013-Sep-25 22:29:57 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 95397 2013 268 0.0 2013-Sep-25 22:29:57 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Sep-25 22:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.480 (still bad) 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Sep-25 22:29:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2013-Sep-25 22:29:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift0) "radar" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift1) "radar" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift2) "radar" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift3) "radar" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift4) "radar" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift5) "radar" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2013-Sep-25 22:30:00 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift6) "radar" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift0) "radar" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift1) "radar" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift2) "radar" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift3) "radar" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift4) "radar" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2013-Sep-25 22:30:01 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift5) "radar" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift6) "radar" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2013-Sep-25 22:30:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 22:30:02 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Sep-25 22:30:02 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2013-Sep-25 22:30:02 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Sep-25 22:30:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Sep-25 22:30:02 LOG1 config_iflo: Receiver ALFA already selected 2013-Sep-25 22:30:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:30:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:30:02 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:30:02 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Sep-25 22:30:02 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:30:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:30:02 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Sep-25 22:30:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:30:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:30:02 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Sep-25 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Sep-25 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Sep-25 22:30:02 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Sep-25 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Sep-25 22:30:02 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Sep-25 22:30:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Sep-25 22:30:03 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Sep-25 22:30:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Sep-25 22:30:03 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Sep-25 22:30:03 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Sep-25 22:30:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Sep-25 22:30:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:30:03 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Sep-25 22:30:03 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:03 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:30:03 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Sep-25 22:30:03 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2013-Sep-25 22:30:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Sep-25 22:30:03 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Sep-25 22:30:03 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2013-Sep-25 22:30:03 DONE finish_task: DONE finished configuration: IF/LO path 2013-Sep-25 22:30:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:30:04 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Sep-25 22:30:04 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Sep-25 22:30:04 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Sep-25 22:30:04 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Sep-25 22:30:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Sep-25 22:30:04 START begin_task: Starting task 'selecting calibration port' 2013-Sep-25 22:30:04 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 LOG3 vw_send: To DATATAKING: calport 3 2013-Sep-25 22:30:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Sep-25 22:30:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:30:04 START begin_task: Starting task 'waiting on calport' 2013-Sep-25 22:30:04 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:04 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Sep-25 22:30:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:30:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:04 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:30:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Sep-25 22:30:04 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Sep-25 22:30:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Sep-25 22:30:04 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:30:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:30:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:30:04 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2013-Sep-25 22:30:04 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:30:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:30:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:30:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:30:05 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:30:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:30:05 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Sep-25 22:30:05 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Sep-25 22:30:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:30:05 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Sep-25 22:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Sep-25 22:30:05 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Sep-25 22:30:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:30:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 22:30:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:30:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:30:05 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Sep-25 22:30:05 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Sep-25 22:30:05 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Sep-25 22:30:05 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2013-Sep-25 22:30:05 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Sep-25 22:30:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:30:06 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Sep-25 22:30:06 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2013-Sep-25 22:30:06 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2013-Sep-25 22:30:06 INFO1 config_mock: Starting to configure the Mock spectrometer 2013-Sep-25 22:30:06 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Sep-25 22:30:06 START begin_task: Starting task 'selecting calibration port' 2013-Sep-25 22:30:06 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 LOG3 vw_send: To DATATAKING: calport 3 2013-Sep-25 22:30:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Sep-25 22:30:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:30:06 START begin_task: Starting task 'waiting on calport' 2013-Sep-25 22:30:06 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Sep-25 22:30:06 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Sep-25 22:30:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:30:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:06 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:30:06 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Sep-25 22:30:06 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Sep-25 22:30:06 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Sep-25 22:30:06 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:30:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:30:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:30:06 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2013-Sep-25 22:30:06 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:30:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:30:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:30:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:30:07 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2013-Sep-25 22:30:07 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Sep-25 22:30:07 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Sep-25 22:30:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:30:07 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2013-Sep-25 22:30:07 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:30:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:30:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:30:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:30:07 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2013-Sep-25 22:30:07 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2013-Sep-25 22:30:07 LOG3 socket_wait: To MOCK: NOP 2013-Sep-25 22:30:07 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2013-Sep-25 22:30:07 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2013-Sep-25 22:30:08 ALERT got_mock_message: Mock spectrometer restarting 2013-Sep-25 22:30:08 LOG4 from_mock: From MOCK: nop ok 2013-Sep-25 22:30:08 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2013-Sep-25 22:30:08 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2013-Sep-25 22:30:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pshift=0 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2013-Sep-25 22:30:08 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2013-Sep-25 22:30:09 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2013-Sep-25 22:30:09 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2013-Sep-25 22:30:09 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:pshift=0:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2013-Sep-25 22:30:09 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2013-Sep-25 22:30:09 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Sep-25 22:30:10 LOG4 from_mock: From MOCK: confok 2013-Sep-25 22:30:10 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2013-Sep-25 22:30:10 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Sep-25 22:30:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2013-Sep-25 22:30:10 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2013-Sep-25 22:30:10 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2013-Sep-25 22:30:10 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2013-Sep-25 22:30:10 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Sep-25 22:30:10 LOG4 from_mock: From MOCK: confok 2013-Sep-25 22:30:10 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2013-Sep-25 22:30:10 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Sep-25 22:30:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2013-Sep-25 22:30:10 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2013-Sep-25 22:30:10 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2013-Sep-25 22:30:10 DONE finish_task: DONE finished configuring: the Mock spectrometer 2013-Sep-25 22:30:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 22:30:10 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2013-Sep-25 22:30:10 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2013-Sep-25 22:30:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Sep-25 22:30:10 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2013-Sep-25 22:30:10 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2013-Sep-25 22:30:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Sep-25 22:30:10 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES7619_p1_035) < 222143 THEN' 2013-Sep-25 22:30:12 LOG3 is_if_valid: Current source data: up 306.4 14.5 UP - - 119 1.0 2013-Sep-25 22:30:12 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_035) < 222143 2013-Sep-25 22:30:12 INFO5 is_if_valid: Condition parsed as: 22.406533666666665 < 22.361944444444447 2013-Sep-25 22:30:12 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES7619_p1_035) < 222143 THEN' 2013-Sep-25 22:30:12 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=305.38 alfaangle=66.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_035 ra=231000.00 dec=91900.00' 2013-Sep-25 22:30:12 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=305.38 alfaangle=66.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_035 ra=231000.00 dec=91900.00' in non-true conditional branch 2013-Sep-25 22:30:12 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2013-Sep-25 22:30:12 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES7619_p1_105) < 224443 THEN' 2013-Sep-25 22:30:14 LOG3 is_if_valid: Current source data: up 311.5 15.7 UP - - 115 1.4 2013-Sep-25 22:30:14 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_105) < 224443 2013-Sep-25 22:30:14 INFO5 is_if_valid: Condition parsed as: 22.413200333333332 < 22.74527777777778 2013-Sep-25 22:30:14 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=328.60 alfaangle=45.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_105 ra=231000.00 dec=73400.00' 2013-Sep-25 22:30:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-25 22:30:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 22:30:15 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 328.60 45.4 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_105 231000.00 73400.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 22:30:15 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-25 22:30:15 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2013-Sep-25 22:30:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2013-Sep-25 22:30:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-25 22:30:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_105} 2013-Sep-25 22:30:15 INFO3 fixed_driftmap: Sending telescope to Az = 328.60 and ZA = 12.44 2013-Sep-25 22:30:15 LOG3 track_source: Calling 'track_source AGES7619_p1_105 328.60 12.4356028336 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 22:30:15 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 22:30:15 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2013-Sep-25 22:30:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_105} INFO {Slewing to source 'AGES7619_p1_105' ...} 2013-Sep-25 22:30:15 INFO1 track_source: Starting to track AGES7619_p1_105 2013-Sep-25 22:30:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_105" 2013-Sep-25 22:30:15 LOG3 vw_send: To DATATAKING: set ra 328.60 2013-Sep-25 22:30:15 LOG3 vw_send: To DATATAKING: set dec 12.4356028336 2013-Sep-25 22:30:15 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 22:30:15 LOG3 vw_send: To DATATAKING: pnt tr 328.60 12.4356028336 -CF 2013-Sep-25 22:30:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 22:30:16 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 22:30:16 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2013-Sep-25 22:30:16 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 22:30:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:30:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 22:30:16 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2013-Sep-25 22:30:16 START begin_task: Starting task 'rotate ALFA to +45.4 degrees' 2013-Sep-25 22:30:16 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Sep-25 22:30:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +45.4 degrees ...} 2013-Sep-25 22:30:16 INFO2 rotate_alfa: ALFA commanded to +45.4 degrees 2013-Sep-25 22:30:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 45.4 REPLY 2013-Sep-25 22:30:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 22:30:16 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 22:30:16 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_105" 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: set ra 328.60 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: vw% 328.60 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: set dec 12.4356028336 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: 12.4356028336 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: pnt tr 328.60 12.4356028336 -CF 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 22:30:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 22:30:32 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 22:30:32 INFO3 alfa_motor: ALFA rotator in-position +45.40 degrees 2013-Sep-25 22:30:32 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 22:30:32 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2013-Sep-25 22:30:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:30:32 STOP finish_task: Finishing task 'rotate ALFA to +45.4 degrees' 2013-Sep-25 22:30:32 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Sep-25 22:30:32 INFO2 finish_task: DONE finished configuration: rotating ALFA to +45.4 degrees 2013-Sep-25 22:30:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:30:32 STOP end_task: Finishing task 'rotate ALFA to +45.4 degrees' with status 'OK' 2013-Sep-25 22:30:32 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Sep-25 22:30:32 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 22:30:32 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Sep-25 22:30:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 22:30:32 LOG3 waittrk: Start waittrk 5 2013-Sep-25 22:30:32 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 22:30:32 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2013-Sep-25 22:30:37 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 22:30:37 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2013-Sep-25 22:30:37 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 22:30:37 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2013-Sep-25 22:31:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 22:31:13 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2013-Sep-25 22:31:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:31:13 INFO2 waittrk: Now tracking AGES7619_p1_105 2013-Sep-25 22:31:13 LOG4 waittrk: Current telescope position: Az = 328.23 ZA = 12.42 2013-Sep-25 22:31:13 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 22:31:13 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Sep-25 22:31:13 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 22:31:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:31:13 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 22:31:13 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Sep-25 22:31:13 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 22:31:13 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Sep-25 22:31:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 22:31:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 22:31:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:31:13 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 22:31:13 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Sep-25 22:31:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 22:31:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:31:13 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:31:13 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:31:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 22:31:14 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Sep-25 22:31:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 22:31:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:31:14 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 22:31:14 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:31:14 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2013-Sep-25 22:31:14 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:31:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:31:14 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2013-Sep-25 22:31:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:31:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 22:31:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:31:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:31:14 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:31:14 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Sep-25 22:31:14 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:31:14 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:31:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:31:14 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Sep-25 22:31:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:31:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:31:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 22:31:14 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Sep-25 22:31:14 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-25 22:31:14 INFO2 astwait: Waiting for 1152 seconds from 02:31:14 to 02:50:26 UTC ... 2013-Sep-25 22:31:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1152 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 22:31:14 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-25 22:31:14 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Sep-25 22:50:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-25 22:50:26 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Sep-25 22:50:26 INFO3 astwait: Finished waiting 2013-Sep-25 22:50:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:50:26 LOG5 dopset_later: Calling 'dopset_later 60.637487468975515' 2013-Sep-25 22:50:26 INFO3 dopset_later: Setting Doppler correction for 22:51:26 (60.6 seconds from now) 2013-Sep-25 22:50:26 LOG5 antvel: Calling 'antvel 328.600000 12.435603 F Heliocentric 60.637487468975515' 2013-Sep-25 22:50:26 LOG2 antvel: Transforming current Az = 328.60 ZA = 12.44 to apparent RA = 23:10:43.5 Dec = +07:38:43.3 2013-Sep-25 22:50:26 LOG2 antvel: Parameters to Doppler: Heliocentric 96686 2013 268 0.0 2013-Sep-25 22:50:26 INFO5 antvel: Computed antenna velocity: +6.19409 km/s 2013-Sep-25 22:50:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=6.1940945168999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-25 22:50:26 INFO4 dopset_gen: New sky frequencies: 1381.214891 1381.214891 1381.214891 1381.214891 1381.214891 1381.214891 1381.214891 1381.214891 1381.214891 2013-Sep-25 22:50:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.214891 sky0=1381.214891 sky1=1381.214891 sky2=1381.214891 sky3=1381.214891 sky4=1381.214891 sky5=1381.214891 sky6=1381.214891 sky7=1381.214891 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 22:50:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.214891 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631214891.0} 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:50:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-25 22:50:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-25 22:50:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:04.1 Dec = +07:34:14.6 2013-Sep-25 22:50:26 LOG3 track_source: Calling 'track_source AGES7619_p1_105 230904.1 073414.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 22:50:26 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 22:50:26 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2013-Sep-25 22:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_105} INFO {Slewing to source 'AGES7619_p1_105' ...} 2013-Sep-25 22:50:26 INFO1 track_source: Starting to track AGES7619_p1_105 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_105" 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: set ra 230904.1 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: set dec 073414.6 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: pnt tr 230904.1 073414.6 -CJ 2013-Sep-25 22:50:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 22:50:26 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 22:50:26 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2013-Sep-25 22:50:26 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 22:50:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:50:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 22:50:27 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2013-Sep-25 22:50:27 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 22:50:27 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Sep-25 22:50:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 22:50:27 LOG3 waittrk: Start waittrk 5 2013-Sep-25 22:50:27 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 22:50:27 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631214891.0} 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_105" 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: set ra 230904.1 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% 230904.1 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: set dec 073414.6 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: 073414.6 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: pnt tr 230904.1 073414.6 -CJ 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 22:50:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 22:50:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 22:50:32 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Sep-25 22:50:32 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 22:50:32 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2013-Sep-25 22:50:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 22:50:33 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2013-Sep-25 22:50:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:50:33 INFO2 waittrk: Now tracking AGES7619_p1_105 2013-Sep-25 22:50:33 LOG4 waittrk: Current telescope position: Az = 328.29 ZA = 12.40 2013-Sep-25 22:50:33 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 22:50:33 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Sep-25 22:50:33 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 22:50:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:50:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 22:50:33 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Sep-25 22:50:33 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-25 22:50:33 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2013-Sep-25 22:50:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-25 22:50:33 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-25 22:50:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-25 22:50:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-25 22:50:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:50:33 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-25 22:50:34 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2013-Sep-25 22:50:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-25 22:50:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:36 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:50:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-25 22:50:36 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2013-Sep-25 22:50:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-25 22:50:36 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 22:50:36 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Sep-25 22:50:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 22:50:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:50:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:50:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:50:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 22:50:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-25 22:50:36 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2013-Sep-25 22:50:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-25 22:50:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-25 22:50:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-25 22:50:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-25 22:50:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-25 22:50:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-25 22:50:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-25 22:50:37 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2013-Sep-25 22:50:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.040 0.905 ALFA beam 1: 0.972 0.952 2013-Sep-25 22:50:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.963 1.074 ALFA beam 3: 0.936 1.040 2013-Sep-25 22:50:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.017 1.012 ALFA beam 5: 0.911 0.067 2013-Sep-25 22:50:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.046 1.034 ALFA beam 7: 0.910 0.963 2013-Sep-25 22:50:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 22:50:37 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Sep-25 22:50:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-25 22:50:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:50:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 22:50:37 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Sep-25 22:50:37 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-25 22:50:37 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Sep-25 22:50:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 22:50:37 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-25 22:50:37 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-25 22:50:37 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-25 22:50:37 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2013-Sep-25 22:50:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:50:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 0.905 0.972 0.952 2013-Sep-25 22:50:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.074 0.936 1.040 2013-Sep-25 22:50:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.012 0.911 0.067 2013-Sep-25 22:50:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.034 0.910 0.963 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.3 B 28.3 28.5 mn:A 0.6 0.5 B 0.4 0.9 gn: 8 11 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.4 30.0 B 29.9 31.8 mn:A 1.1 0.4 B 0.2 0.1 gn: 9 12 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.7 B 31.6 26.5 mn:A 0.0 -0.4 B -0.1 1.0 gn: 10 8 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b1s1g0 rms:A 33.9 31.3 B 32.4 32.4 mn:A 1.4 1.0 B 0.8 1.2 gn: 11 7 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.5 28.6 B 29.3 30.8 mn:A 0.2 -0.1 B 0.4 0.3 gn: 6 9 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b2s1g0 rms:A 33.2 33.5 B 31.9 29.6 mn:A 0.2 -0.5 B -0.1 0.4 gn: 7 9 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.0 30.6 B 33.4 29.8 mn:A 0.2 -0.3 B -0.3 -0.3 gn: 9 11 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b3s1g0 rms:A 33.1 32.4 B 32.9 34.2 mn:A 0.0 0.2 B 0.1 0.6 gn: 9 11 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b4s0g0 rms:A 32.0 31.1 B 29.9 30.1 mn:A -0.1 0.7 B 0.4 -0.3 gn: 5 6 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b4s1g0 rms:A 35.4 32.1 B 33.6 32.4 mn:A 0.1 0.1 B -0.1 0.6 gn: 7 8 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.4 30.1 B 28.9 28.9 mn:A 0.8 -0.2 B 1.4 0.6 gn: 7 26 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b5s1g0 rms:A 33.5 33.1 B 29.0 28.8 mn:A 1.1 0.0 B -1.1 0.8 gn: 7 27 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.7 29.5 B 30.7 31.7 mn:A -0.1 1.6 B -0.2 -0.2 gn: 7 13 2013-Sep-25 22:50:44 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.5 30.1 B 32.0 32.3 mn:A 0.9 0.7 B -1.2 -0.9 gn: 8 14 2013-Sep-25 22:50:44 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-25 22:50:44 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2013-Sep-25 22:50:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-25 22:50:44 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-25 22:50:44 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Sep-25 22:50:44 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-25 22:50:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:50:44 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-25 22:50:44 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Sep-25 22:50:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 22:50:44 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-25 22:50:44 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2013-Sep-25 22:50:44 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-25 22:50:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:50:44 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-25 22:50:44 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2013-Sep-25 22:50:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:50:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:50:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:50:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 22:50:45 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-25 22:50:45 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-25 22:50:45 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-25 22:50:45 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 22:50:45 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 22:50:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 22:50:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:50:45 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 22:50:45 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 22:50:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 22:50:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 22:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:45 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 22:50:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 22:50:45 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 22:50:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:50:45 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 22:50:45 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:50:45 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:50:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:50:45 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:50:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 22:50:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 22:50:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:50:45 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 22:50:45 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2013-Sep-25 22:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:50:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20130925.a2048.0008.fits 2013-Sep-25 22:50:46 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 22:50:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 22:50:46 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2013-Sep-25 22:50:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 22:50:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 22:50:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 22:50:46 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2013-Sep-25 22:50:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-25 22:50:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-25 22:50:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-25 22:50:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:50:46 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Sep-25 22:50:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130925.a2048.0008.fits} 2013-Sep-25 22:50:46 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:50:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-25 22:50:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:50:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:50:46 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Sep-25 22:50:46 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-25 22:50:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 22:50:46 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2013-Sep-25 22:50:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-25 22:50:46 LOG5 log_alfabeam: Parameters: 23.151138888888887 7.5707222222222237 22.733862 2013.7363501660454 45.399899 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 0 23.151138888888880 7.570722222222223 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 1 23.149122090638024 7.672018787981598 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 2 23.144877140675330 7.605283454926052 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 3 23.146843716498243 7.503757810961170 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 4 23.153130032763475 7.469268156857107 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 5 23.157433977606356 7.536807742470694 2013-Sep-25 22:50:46 LOG4 log_alfabeam: ALFABEAM 6 23.155392664701285 7.638030043647850 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: object=AGES7619_p1_105 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 22:50:46 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: patternid=326800171 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: scanid=326800185 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: topoafreqhz=1456214891.0 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: topobfreqhz=1306214891.0 2013-Sep-25 22:50:47 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 22:50:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 22:50:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_105:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326800171:scanid=326800185:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214891.0:topobfreqhz=1306214891.0:filetype=1 2013-Sep-25 22:50:47 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 22:50:47 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2013-Sep-25 22:50:47 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 22:50:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 22:50:47 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2013-Sep-25 22:50:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 22:50:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 22:50:47 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 22:50:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 22:50:47 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2013-Sep-25 22:50:47 LOG4 from_mock: From MOCK: starok 2013-Sep-25 22:50:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 22:50:47 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2013-Sep-25 22:50:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 22:50:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800185 2013-Sep-25 22:50:48 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 22:50:48 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2013-Sep-25 22:50:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 22:50:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:50:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 22:50:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-25 22:50:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10249.00 2013-Sep-25 22:50:50 INFO2 got_mock_message: Mock spectrometer start file number is 02100 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 22:50:50 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 22:50:50 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:50 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:50:53 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:50:53.01 2013-Sep-25 22:50:53 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380163853.01 Wed Sep 25 22:50:53 2013 2013-Sep-25 22:50:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214891 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.503 (still bad) 2013-Sep-25 22:50:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:50:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:50:59 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 22:50:59 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 22:50:59 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 22:50:59 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2013-Sep-25 22:50:59 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 22:50:59 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2013-Sep-25 22:50:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-25 22:50:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 22:50:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 22:50:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 22:50:59 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2013-Sep-25 22:50:59 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 22:50:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 22:50:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 22:50:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 22:50:59 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2013-Sep-25 22:50:59 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-25 22:50:59 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 22:50:59 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2013-Sep-25 22:50:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-25 22:50:59 LOG5 log_alfabeam: Parameters: 23.151138888888887 7.5707222222222237 22.737761 2013.7363506096788 45.399899 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 0 23.151138888888887 7.570722222222225 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 1 23.149148448639167 7.672133908441580 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 2 23.144886222987331 7.605644340350549 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 3 23.146826269252497 7.504005921429166 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 4 23.153103586815885 7.469154146250529 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 5 23.157425141878107 7.536446519721899 2013-Sep-25 22:50:59 LOG4 log_alfabeam: ALFABEAM 6 23.155410102924488 7.637785160134175 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: object=AGES7619_p1_105 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: patternid=326800171 2013-Sep-25 22:50:59 TEST take_mock_data: PSET configuration: scanid=326800186 2013-Sep-25 22:51:00 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 22:51:00 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 22:51:00 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 22:51:00 TEST take_mock_data: PSET configuration: topoafreqhz=1456214891.0 2013-Sep-25 22:51:00 TEST take_mock_data: PSET configuration: topobfreqhz=1306214891.0 2013-Sep-25 22:51:00 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 22:51:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 22:51:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_105:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326800171:scanid=326800186:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214891.0:topobfreqhz=1306214891.0:filetype=1 2013-Sep-25 22:51:00 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 22:51:00 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2013-Sep-25 22:51:00 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 22:51:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 22:51:00 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2013-Sep-25 22:51:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 22:51:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 22:51:00 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 22:51:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 22:51:00 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2013-Sep-25 22:51:00 LOG4 from_mock: From MOCK: starok 2013-Sep-25 22:51:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 22:51:00 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2013-Sep-25 22:51:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 22:51:00 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800186 2013-Sep-25 22:51:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 22:51:01 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2013-Sep-25 22:51:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 22:51:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:51:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 22:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.503 (still bad) 2013-Sep-25 22:51:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-25 22:51:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10262.00 2013-Sep-25 22:51:02 INFO2 got_mock_message: Mock spectrometer start file number is 02200 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 22:51:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 22:51:02 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 22:51:05 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:51:05.02 2013-Sep-25 22:51:05 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380163865.02 Wed Sep 25 22:51:05 2013 2013-Sep-25 22:51:05 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214891 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:51:07 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-25 22:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.469 (still bad) 2013-Sep-25 22:51:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 22:51:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 22:51:11 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 22:51:11 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 22:51:11 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 22:51:11 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 22:51:11 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-25 22:51:11 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-25 22:51:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:51:11 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-25 22:51:11 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-25 22:51:11 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 328.60 and ZA = 12.44 2013-Sep-25 22:51:11 LOG3 track_source: Calling 'track_source AGES7619_p1_105 328.60 12.4356028336 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 22:51:11 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 22:51:11 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_105} INFO {Slewing to source 'AGES7619_p1_105' ...} 2013-Sep-25 22:51:11 INFO1 track_source: Starting to track AGES7619_p1_105 2013-Sep-25 22:51:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_105" 2013-Sep-25 22:51:11 LOG3 vw_send: To DATATAKING: set ra 328.60 2013-Sep-25 22:51:11 LOG3 vw_send: To DATATAKING: set dec 12.4356028336 2013-Sep-25 22:51:11 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 22:51:11 LOG3 vw_send: To DATATAKING: pnt tr 328.60 12.4356028336 -CF 2013-Sep-25 22:51:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 22:51:11 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 22:51:11 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 22:51:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 22:51:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 22:51:11 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Sep-25 22:51:11 LOG1 fixed_driftmap: Parameters: HA = -00:26:00.0 Start = 22:44:43.7 LST = 22:44:28.0 diff = 15.7 secs 2013-Sep-25 22:51:11 INFO2 fixed_driftmap: Waiting 13.7 seconds for RA 23:10:44 2013-Sep-25 22:51:12 INFO2 lstwait: Waiting for 13.6 secs from LST 22:44:28 to LST 22:44:42 ... 2013-Sep-25 22:51:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.640160299382513 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 22:51:12 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-25 22:51:12 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_105" 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: set ra 328.60 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: vw% 328.60 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: set dec 12.4356028336 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: 12.4356028336 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: pnt tr 328.60 12.4356028336 -CF 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 22:51:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 22:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:51:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-25 22:51:25 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2013-Sep-25 22:51:25 LOG4 lstwait: Finished waiting 1.36 seconds late 2013-Sep-25 22:51:25 INFO3 lstwait: Finished waiting 2013-Sep-25 22:51:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 22:51:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-25 22:51:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-25 22:51:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-25 22:51:26 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-25 22:51:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 22:51:26 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Sep-25 22:51:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-25 22:51:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: object=AGES7619_p1_105 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: patternid=326800187 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: scanid=326800187 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: topoafreqhz=1456214891.0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: topobfreqhz=1306214891.0 2013-Sep-25 22:51:26 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 22:51:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 22:51:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_105:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326800187:scanid=326800187:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214891.0:topobfreqhz=1306214891.0:filetype=1 2013-Sep-25 22:51:26 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 22:51:26 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2013-Sep-25 22:51:26 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 22:51:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 22:51:26 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2013-Sep-25 22:51:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 22:51:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 22:51:26 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-25 22:51:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 22:51:26 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2013-Sep-25 22:51:26 LOG4 from_mock: From MOCK: starok 2013-Sep-25 22:51:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 22:51:26 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2013-Sep-25 22:51:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 22:51:27 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326800187 2013-Sep-25 22:51:27 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 22:51:27 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2013-Sep-25 22:51:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 22:51:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 22:51:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 22:51:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-25 22:51:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10288.00 2013-Sep-25 22:51:28 INFO2 got_mock_message: Mock spectrometer start file number is 02300 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 22:51:29 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-25 22:51:29 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214891 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214891 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 22:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-25 22:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 22:51:32 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:51:32.02 2013-Sep-25 22:51:32 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380163892.02 Wed Sep 25 22:51:32 2013 2013-Sep-25 22:51:32 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 22:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 22:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 22:51:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.112 (still bad) 2013-Sep-25 22:51:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:51:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.908 0.975 0.953 2013-Sep-25 22:51:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.084 0.940 1.037 2013-Sep-25 22:51:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.015 0.930 0.067 2013-Sep-25 22:51:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 1.049 0.925 0.976 2013-Sep-25 22:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 22:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 22:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-25 22:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.112 (still bad) 2013-Sep-25 22:51:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:51:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 22:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.160 (still bad) 2013-Sep-25 22:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 22:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.163 (still bad) 2013-Sep-25 22:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.162 (still bad) 2013-Sep-25 22:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 22:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.216 (still bad) 2013-Sep-25 22:52:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.287 (still bad) 2013-Sep-25 22:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.389 (still bad) 2013-Sep-25 22:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.451 (still bad) 2013-Sep-25 22:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.468 (still bad) 2013-Sep-25 22:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.445 (still bad) 2013-Sep-25 22:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.413 (still bad) 2013-Sep-25 22:52:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:52:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 22:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.316 (still bad) 2013-Sep-25 22:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.239 (still bad) 2013-Sep-25 22:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 22:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.185 (still bad) 2013-Sep-25 22:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.240 (still bad) 2013-Sep-25 22:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.337 (still bad) 2013-Sep-25 22:52:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 22:52:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.388 (still bad) 2013-Sep-25 22:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.469 (still bad) 2013-Sep-25 22:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.490 (still bad) 2013-Sep-25 22:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.461 (still bad) 2013-Sep-25 22:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.407 (still bad) 2013-Sep-25 22:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.357 (still bad) 2013-Sep-25 22:52:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.259 (still bad) 2013-Sep-25 22:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.207 (still bad) 2013-Sep-25 22:52:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:52:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.924 0.979 0.959 2013-Sep-25 22:52:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.037 1.165 0.949 1.043 2013-Sep-25 22:52:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.032 0.920 0.067 2013-Sep-25 22:52:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 1.048 0.923 0.974 2013-Sep-25 22:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 22:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 22:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.155 (still bad) 2013-Sep-25 22:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 22:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.157 (still bad) 2013-Sep-25 22:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 22:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 22:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-25 22:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.110 (still bad) 2013-Sep-25 22:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 22:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-25 22:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.101 (still bad) 2013-Sep-25 22:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 22:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 22:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.095 (still bad) 2013-Sep-25 22:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 22:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 22:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-25 22:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.095 (still bad) 2013-Sep-25 22:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 22:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 22:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.106 (still bad) 2013-Sep-25 22:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 22:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-25 22:53:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:53:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.936 0.980 0.967 2013-Sep-25 22:53:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.099 0.947 1.040 2013-Sep-25 22:53:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.030 0.917 0.067 2013-Sep-25 22:53:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 1.057 0.935 0.985 2013-Sep-25 22:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 22:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.110 (still bad) 2013-Sep-25 22:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 22:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-25 22:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.106 (still bad) 2013-Sep-25 22:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.115 (still bad) 2013-Sep-25 22:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 22:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-25 22:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 22:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.109 (still bad) 2013-Sep-25 22:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 22:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 22:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 22:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.100 (still bad) 2013-Sep-25 22:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.072 (still bad) 2013-Sep-25 22:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 22:54:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:54:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.919 0.978 0.959 2013-Sep-25 22:54:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.086 0.952 1.044 2013-Sep-25 22:54:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.037 0.921 0.067 2013-Sep-25 22:54:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 1.037 0.914 0.964 2013-Sep-25 22:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.105 (still bad) 2013-Sep-25 22:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 22:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 22:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.101 (still bad) 2013-Sep-25 22:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 22:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 22:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.099 (still bad) 2013-Sep-25 22:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.072 (still bad) 2013-Sep-25 22:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 22:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 22:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.088 (still bad) 2013-Sep-25 22:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 22:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 22:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.083 (still bad) 2013-Sep-25 22:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:55:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:55:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.893 0.963 0.941 2013-Sep-25 22:55:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.072 0.934 1.030 2013-Sep-25 22:55:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.018 0.914 0.067 2013-Sep-25 22:55:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 1.033 0.912 0.961 2013-Sep-25 22:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 22:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.079 (still bad) 2013-Sep-25 22:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 22:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.091 (still bad) 2013-Sep-25 22:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 22:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.094 (still bad) 2013-Sep-25 22:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.099 (still bad) 2013-Sep-25 22:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 22:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.100 (still bad) 2013-Sep-25 22:56:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 22:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 22:56:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.074 < 0.75)! 2013-Sep-25 22:56:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.925 0.991 0.969 2013-Sep-25 22:56:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.097 0.951 1.045 2013-Sep-25 22:56:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.043 0.933 0.074 2013-Sep-25 22:56:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.068 0.938 0.994 2013-Sep-25 22:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.095 (still bad) 2013-Sep-25 22:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.101 (still bad) 2013-Sep-25 22:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 22:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 22:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.105 (still bad) 2013-Sep-25 22:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 22:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.082 (still bad) 2013-Sep-25 22:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-25 22:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 22:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.084 (still bad) 2013-Sep-25 22:57:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:57:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:57:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.930 0.996 0.974 2013-Sep-25 22:57:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.986 1.107 0.964 1.055 2013-Sep-25 22:57:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.019 0.914 0.067 2013-Sep-25 22:57:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.068 0.941 0.995 2013-Sep-25 22:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 22:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 22:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-25 22:58:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-25 22:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 22:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.101 (still bad) 2013-Sep-25 22:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 22:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-25 22:58:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 22:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-25 22:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 22:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 22:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 22:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.083 (still bad) 2013-Sep-25 22:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.110 (still bad) 2013-Sep-25 22:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 22:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 22:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 22:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.082 (still bad) 2013-Sep-25 22:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-25 22:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 22:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 22:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.106 (still bad) 2013-Sep-25 22:58:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:58:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 0.901 0.974 0.945 2013-Sep-25 22:58:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.076 0.936 1.030 2013-Sep-25 22:58:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.019 0.915 0.067 2013-Sep-25 22:58:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 1.037 0.921 0.963 2013-Sep-25 22:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 22:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-25 22:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 22:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 22:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-25 22:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 22:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-25 22:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 22:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.105 (still bad) 2013-Sep-25 22:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 22:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 22:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.082 (still bad) 2013-Sep-25 22:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.106 (still bad) 2013-Sep-25 22:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 22:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 22:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.083 (still bad) 2013-Sep-25 22:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 22:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 22:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.101 (still bad) 2013-Sep-25 22:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 22:59:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 22:59:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.904 0.968 0.948 2013-Sep-25 22:59:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.079 0.940 1.034 2013-Sep-25 22:59:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.024 0.917 0.067 2013-Sep-25 22:59:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.041 0.918 0.969 2013-Sep-25 22:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.079 (still bad) 2013-Sep-25 22:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 22:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.100 (still bad) 2013-Sep-25 23:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-25 23:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 23:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.108 (still bad) 2013-Sep-25 23:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-25 23:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.085 (still bad) 2013-Sep-25 23:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 23:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.081 (still bad) 2013-Sep-25 23:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 23:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.085 (still bad) 2013-Sep-25 23:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.085 (still bad) 2013-Sep-25 23:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-25 23:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.088 (still bad) 2013-Sep-25 23:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 23:00:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:00:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.910 0.973 0.954 2013-Sep-25 23:00:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 1.101 0.947 1.036 2013-Sep-25 23:00:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.056 1.060 0.917 0.067 2013-Sep-25 23:00:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 1.047 0.920 0.973 2013-Sep-25 23:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.086 (still bad) 2013-Sep-25 23:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-25 23:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-25 23:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-25 23:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-25 23:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-25 23:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-25 23:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-25 23:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 23:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-25 23:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.095 (still bad) 2013-Sep-25 23:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-25 23:01:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:01:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:01:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.929 0.984 0.969 2013-Sep-25 23:01:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.092 0.950 1.039 2013-Sep-25 23:01:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.034 0.923 0.067 2013-Sep-25 23:01:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 1.053 0.928 0.978 2013-Sep-25 23:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-25 23:02:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.106 (still bad) 2013-Sep-25 23:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 23:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-25 23:02:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 23:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 23:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.111 (still bad) 2013-Sep-25 23:02:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:02:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 23:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.095 (still bad) 2013-Sep-25 23:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.111 (still bad) 2013-Sep-25 23:02:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 23:02:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:02:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.929 0.987 0.965 2013-Sep-25 23:02:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.094 0.947 1.043 2013-Sep-25 23:02:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.034 0.924 0.067 2013-Sep-25 23:02:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 1.044 0.919 0.970 2013-Sep-25 23:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.107 (still bad) 2013-Sep-25 23:03:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-25 23:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:03:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.105 (still bad) 2013-Sep-25 23:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-25 23:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 23:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.104 (still bad) 2013-Sep-25 23:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 23:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-25 23:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.103 (still bad) 2013-Sep-25 23:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.083 (still bad) 2013-Sep-25 23:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.081 (still bad) 2013-Sep-25 23:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.082 (still bad) 2013-Sep-25 23:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:04:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:04:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.911 0.983 0.961 2013-Sep-25 23:04:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.096 0.952 1.042 2013-Sep-25 23:04:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.022 0.910 0.067 2013-Sep-25 23:04:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 1.051 0.924 0.977 2013-Sep-25 23:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.081 (still bad) 2013-Sep-25 23:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.080 (still bad) 2013-Sep-25 23:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-25 23:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 23:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.072 (still bad) 2013-Sep-25 23:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-25 23:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.088 (still bad) 2013-Sep-25 23:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 23:05:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.073 < 0.75)! 2013-Sep-25 23:05:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.922 0.989 0.969 2013-Sep-25 23:05:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.092 0.947 1.038 2013-Sep-25 23:05:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.036 0.929 0.073 2013-Sep-25 23:05:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.063 0.934 0.990 2013-Sep-25 23:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 23:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.092 (still bad) 2013-Sep-25 23:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.100 (still bad) 2013-Sep-25 23:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.075 (still bad) 2013-Sep-25 23:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.102 (still bad) 2013-Sep-25 23:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.096 (still bad) 2013-Sep-25 23:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.071 (still bad) 2013-Sep-25 23:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.077 (still bad) 2013-Sep-25 23:06:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:06:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.919 0.988 0.965 2013-Sep-25 23:06:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 1.099 0.960 1.045 2013-Sep-25 23:06:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.011 0.907 0.067 2013-Sep-25 23:06:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.062 0.933 0.988 2013-Sep-25 23:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 23:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.078 (still bad) 2013-Sep-25 23:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-25 23:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.080 (still bad) 2013-Sep-25 23:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-25 23:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 23:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 23:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-25 23:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.081 (still bad) 2013-Sep-25 23:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-25 23:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 23:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.078 (still bad) 2013-Sep-25 23:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:07:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:07:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.914 0.979 0.952 2013-Sep-25 23:07:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.085 0.935 1.027 2013-Sep-25 23:07:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.031 0.918 0.067 2013-Sep-25 23:07:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 1.047 0.924 0.975 2013-Sep-25 23:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-25 23:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-25 23:07:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.099 (still bad) 2013-Sep-25 23:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.073 (still bad) 2013-Sep-25 23:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.100 (still bad) 2013-Sep-25 23:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.070 (still bad) 2013-Sep-25 23:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.076 (still bad) 2013-Sep-25 23:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.099 (still bad) 2013-Sep-25 23:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.072 (still bad) 2013-Sep-25 23:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:08:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 23:08:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 0.909 0.977 0.951 2013-Sep-25 23:08:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.089 0.957 1.045 2013-Sep-25 23:08:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.047 0.922 0.068 2013-Sep-25 23:08:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 1.050 0.925 0.977 2013-Sep-25 23:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.104 (still bad) 2013-Sep-25 23:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.074 (still bad) 2013-Sep-25 23:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-25 23:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.104 (still bad) 2013-Sep-25 23:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-25 23:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.100 (still bad) 2013-Sep-25 23:08:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:08:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-25 23:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.090 (still bad) 2013-Sep-25 23:08:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:08:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.084 (still bad) 2013-Sep-25 23:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.086 (still bad) 2013-Sep-25 23:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-25 23:09:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.085 (still bad) 2013-Sep-25 23:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 23:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:09:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 23:09:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.931 0.989 0.974 2013-Sep-25 23:09:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.083 0.944 1.034 2013-Sep-25 23:09:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.047 0.928 0.068 2013-Sep-25 23:09:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 1.064 0.935 0.991 2013-Sep-25 23:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:09:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.082 (still bad) 2013-Sep-25 23:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 23:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-25 23:09:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-25 23:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.093 (still bad) 2013-Sep-25 23:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-25 23:09:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.085 (still bad) 2013-Sep-25 23:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-25 23:09:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 23:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.080 (still bad) 2013-Sep-25 23:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-25 23:10:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.084 (still bad) 2013-Sep-25 23:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-25 23:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:10:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2013-Sep-25 23:10:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2013-Sep-25 23:10:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:10:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.903 0.970 0.946 2013-Sep-25 23:10:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.082 0.937 1.030 2013-Sep-25 23:10:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.019 0.910 0.067 2013-Sep-25 23:10:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 1.039 0.913 0.964 2013-Sep-25 23:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-25 23:10:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.086 (still bad) 2013-Sep-25 23:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-25 23:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.079 (still bad) 2013-Sep-25 23:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-25 23:10:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.078 (still bad) 2013-Sep-25 23:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 16-31 errors PFB = 256-511 errors 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 128-255 errors 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 128-255 errors 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 64-127 errors 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 8-15 errors PFB = 128-255 errors 2013-Sep-25 23:10:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 64-127 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 64-127 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 64-127 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 8-15 errors PFB = 128-255 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2013-Sep-25 23:10:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 8-15 errors PFB = 128-255 errors 2013-Sep-25 23:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.087 (still bad) 2013-Sep-25 23:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-25 23:10:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.092 (still bad) 2013-Sep-25 23:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.095 (still bad) 2013-Sep-25 23:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.091 (still bad) 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 128-255 errors 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 4-7 errors 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 256-511 errors 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2013-Sep-25 23:10:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 128-255 errors 2013-Sep-25 23:10:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2013-Sep-25 23:10:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2013-Sep-25 23:10:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2013-Sep-25 23:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.082 (still bad) 2013-Sep-25 23:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-25 23:10:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.077 (still bad) 2013-Sep-25 23:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-25 23:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-25 23:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-25 23:10:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 8-15 errors 2013-Sep-25 23:10:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2013-Sep-25 23:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.087 (still bad) 2013-Sep-25 23:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.115 (still bad) 2013-Sep-25 23:11:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:11:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-25 23:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.105 (still bad) 2013-Sep-25 23:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 23:11:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 64-127 errors 2013-Sep-25 23:11:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2013-Sep-25 23:11:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2013-Sep-25 23:11:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2013-Sep-25 23:11:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2013-Sep-25 23:11:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2013-Sep-25 23:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.089 (still bad) 2013-Sep-25 23:11:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.077 < 0.75)! 2013-Sep-25 23:11:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 0.945 1.000 0.974 2013-Sep-25 23:11:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 1.116 0.966 1.068 2013-Sep-25 23:11:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.053 0.937 0.077 2013-Sep-25 23:11:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.063 0.935 0.988 2013-Sep-25 23:11:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:11:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.081 (still bad) 2013-Sep-25 23:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-25 23:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-25 23:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-25 23:11:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2013-Sep-25 23:11:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2013-Sep-25 23:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.088 (still bad) 2013-Sep-25 23:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.111 (still bad) 2013-Sep-25 23:11:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:11:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.083 (still bad) 2013-Sep-25 23:11:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-25 23:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-25 23:11:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:11:33 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:11:33 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:11:33 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2013-Sep-25 23:11:33 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:11:33 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Sep-25 23:11:33 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-25 23:11:33 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2013-Sep-25 23:11:33 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-25 23:11:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 23:11:33 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-25 23:11:33 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2013-Sep-25 23:11:33 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2013-Sep-25 23:11:33 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES7619_p1_103) < 230743 THEN' 2013-Sep-25 23:11:35 LOG3 is_if_valid: Current source data: up 352.3 10.8 UP - - 74 1.0 2013-Sep-25 23:11:35 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_103) < 230743 2013-Sep-25 23:11:35 INFO5 is_if_valid: Condition parsed as: 23.098144666666666 < 23.128611111111113 2013-Sep-25 23:11:35 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=355.99 alfaangle=22.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_103 ra=231000.00 dec=73700.00' 2013-Sep-25 23:11:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-25 23:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-25 23:11:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 23:11:36 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 355.99 22.4 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_103 231000.00 73700.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:11:36 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-25 23:11:36 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2013-Sep-25 23:11:36 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_105' 2013-Sep-25 23:11:36 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-25 23:11:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_103} 2013-Sep-25 23:11:36 INFO3 fixed_driftmap: Sending telescope to Az = 355.99 and ZA = 10.68 2013-Sep-25 23:11:36 LOG3 track_source: Calling 'track_source AGES7619_p1_103 355.99 10.6833536162 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:11:36 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:11:36 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2013-Sep-25 23:11:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_103} INFO {Slewing to source 'AGES7619_p1_103' ...} 2013-Sep-25 23:11:36 INFO1 track_source: Starting to track AGES7619_p1_103 2013-Sep-25 23:11:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_103" 2013-Sep-25 23:11:36 LOG3 vw_send: To DATATAKING: set ra 355.99 2013-Sep-25 23:11:36 LOG3 vw_send: To DATATAKING: set dec 10.6833536162 2013-Sep-25 23:11:36 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:11:36 LOG3 vw_send: To DATATAKING: pnt tr 355.99 10.6833536162 -CF 2013-Sep-25 23:11:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:11:36 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:11:36 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2013-Sep-25 23:11:36 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:11:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:11:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:11:36 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2013-Sep-25 23:11:36 START begin_task: Starting task 'rotate ALFA to +22.4 degrees' 2013-Sep-25 23:11:36 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Sep-25 23:11:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +22.4 degrees ...} 2013-Sep-25 23:11:36 INFO2 rotate_alfa: ALFA commanded to +22.4 degrees 2013-Sep-25 23:11:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION 22.4 REPLY 2013-Sep-25 23:11:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 23:11:36 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 23:11:36 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_103" 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: set ra 355.99 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: vw% 355.99 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: set dec 10.6833536162 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: 10.6833536162 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: pnt tr 355.99 10.6833536162 -CF 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:11:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:11:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 23:11:50 INFO3 alfa_motor: ALFA rotator in-position +22.40 degrees 2013-Sep-25 23:11:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 23:11:50 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Sep-25 23:11:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:11:50 STOP finish_task: Finishing task 'rotate ALFA to +22.4 degrees' 2013-Sep-25 23:11:50 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Sep-25 23:11:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to +22.4 degrees 2013-Sep-25 23:11:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:11:50 STOP end_task: Finishing task 'rotate ALFA to +22.4 degrees' with status 'OK' 2013-Sep-25 23:11:51 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Sep-25 23:11:51 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 23:11:51 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Sep-25 23:11:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 23:11:51 LOG3 waittrk: Start waittrk 5 2013-Sep-25 23:11:51 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 23:11:51 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2013-Sep-25 23:11:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 23:11:56 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2013-Sep-25 23:11:56 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 23:11:56 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2013-Sep-25 23:12:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 23:12:58 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2013-Sep-25 23:12:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:12:58 INFO2 waittrk: Now tracking AGES7619_p1_103 2013-Sep-25 23:12:58 LOG4 waittrk: Current telescope position: Az = 355.65 ZA = 10.65 2013-Sep-25 23:12:58 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 23:12:58 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Sep-25 23:12:58 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 23:12:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:12:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 23:12:58 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Sep-25 23:12:58 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 23:12:58 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Sep-25 23:12:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 23:12:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 23:12:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:12:58 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 23:12:58 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2013-Sep-25 23:12:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 23:12:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:12:59 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 23:12:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 23:12:59 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2013-Sep-25 23:12:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 23:12:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:12:59 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 23:12:59 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:12:59 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2013-Sep-25 23:12:59 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:12:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:12:59 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2013-Sep-25 23:12:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:12:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 23:12:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:12:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:12:59 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:12:59 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Sep-25 23:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:12:59 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:12:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:12:59 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Sep-25 23:12:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:13:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:13:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 23:13:00 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Sep-25 23:13:00 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-25 23:13:00 INFO2 astwait: Waiting for 22 seconds from 03:13:00 to 03:13:22 UTC ... 2013-Sep-25 23:13:00 LOG4 send_obs_status: To obs_status: <1> TASKTIME 22 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 23:13:00 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-25 23:13:00 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Sep-25 23:13:22 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-25 23:13:22 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Sep-25 23:13:22 INFO3 astwait: Finished waiting 2013-Sep-25 23:13:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:13:22 LOG5 dopset_later: Calling 'dopset_later 60.95327384518793' 2013-Sep-25 23:13:22 INFO3 dopset_later: Setting Doppler correction for 23:14:22 (61 seconds from now) 2013-Sep-25 23:13:22 LOG5 antvel: Calling 'antvel 355.990000 10.683354 F Heliocentric 60.95327384518793' 2013-Sep-25 23:13:22 LOG2 antvel: Transforming current Az = 355.99 ZA = 10.68 to apparent RA = 23:10:43.5 Dec = +07:41:43.3 2013-Sep-25 23:13:22 LOG2 antvel: Parameters to Doppler: Heliocentric 98062 2013 268 0.0 2013-Sep-25 23:13:22 INFO5 antvel: Computed antenna velocity: +6.23459 km/s 2013-Sep-25 23:13:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=6.2345873912999998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-25 23:13:22 INFO4 dopset_gen: New sky frequencies: 1381.214704 1381.214704 1381.214704 1381.214704 1381.214704 1381.214704 1381.214704 1381.214704 1381.214704 2013-Sep-25 23:13:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.214704 sky0=1381.214704 sky1=1381.214704 sky2=1381.214704 sky3=1381.214704 sky4=1381.214704 sky5=1381.214704 sky6=1381.214704 sky7=1381.214704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 23:13:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.214704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631214704.0} 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 23:13:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-25 23:13:22 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-25 23:13:22 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:03.8 Dec = +07:37:14.7 2013-Sep-25 23:13:22 LOG3 track_source: Calling 'track_source AGES7619_p1_103 230903.8 073714.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:13:22 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:13:22 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2013-Sep-25 23:13:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_103} INFO {Slewing to source 'AGES7619_p1_103' ...} 2013-Sep-25 23:13:22 INFO1 track_source: Starting to track AGES7619_p1_103 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_103" 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: set ra 230903.8 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: set dec 073714.7 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: pnt tr 230903.8 073714.7 -CJ 2013-Sep-25 23:13:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:13:22 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:13:23 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2013-Sep-25 23:13:23 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:13:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:13:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:13:23 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2013-Sep-25 23:13:23 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 23:13:23 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Sep-25 23:13:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 23:13:23 LOG3 waittrk: Start waittrk 5 2013-Sep-25 23:13:23 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 23:13:23 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631214704.0} 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_103" 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: set ra 230903.8 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% 230903.8 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: set dec 073714.7 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: 073714.7 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: pnt tr 230903.8 073714.7 -CJ 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:13:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:13:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 23:13:28 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2013-Sep-25 23:13:28 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 23:13:28 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Sep-25 23:13:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 23:13:29 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Sep-25 23:13:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:13:29 INFO2 waittrk: Now tracking AGES7619_p1_103 2013-Sep-25 23:13:29 LOG4 waittrk: Current telescope position: Az = 355.74 ZA = 10.65 2013-Sep-25 23:13:29 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 23:13:29 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Sep-25 23:13:29 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 23:13:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:13:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 23:13:29 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Sep-25 23:13:29 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-25 23:13:29 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2013-Sep-25 23:13:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-25 23:13:29 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-25 23:13:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-25 23:13:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-25 23:13:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:13:30 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-25 23:13:30 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2013-Sep-25 23:13:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-25 23:13:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:13:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:32 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 23:13:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-25 23:13:32 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2013-Sep-25 23:13:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-25 23:13:32 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 23:13:32 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Sep-25 23:13:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 23:13:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:13:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:13:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:13:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:13:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-25 23:13:33 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2013-Sep-25 23:13:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-25 23:13:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 4 dB --- beam 1: 5 8 dB 2013-Sep-25 23:13:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-25 23:13:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-25 23:13:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-25 23:13:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-25 23:13:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-25 23:13:33 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2013-Sep-25 23:13:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.025 1.122 ALFA beam 1: 0.954 0.940 2013-Sep-25 23:13:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.935 1.053 ALFA beam 3: 0.931 1.040 2013-Sep-25 23:13:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.000 1.001 ALFA beam 5: 0.919 0.067 2013-Sep-25 23:13:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.065 1.038 ALFA beam 7: 0.923 0.967 2013-Sep-25 23:13:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 23:13:33 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Sep-25 23:13:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-25 23:13:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:13:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 23:13:33 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Sep-25 23:13:34 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-25 23:13:34 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2013-Sep-25 23:13:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 23:13:34 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-25 23:13:34 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-25 23:13:34 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-25 23:13:34 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2013-Sep-25 23:13:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:13:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.122 0.954 0.940 2013-Sep-25 23:13:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.053 0.931 1.040 2013-Sep-25 23:13:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.000 1.001 0.919 0.067 2013-Sep-25 23:13:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 1.038 0.923 0.967 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.0 27.2 B 28.3 28.5 mn:A 0.5 0.5 B 0.3 0.8 gn: 8 11 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b0s1g0 rms:A 28.9 27.6 B 28.1 29.8 mn:A 1.2 0.4 B 0.3 0.1 gn: 9 12 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.7 28.6 B 31.6 26.5 mn:A 0.1 -0.4 B -0.1 1.0 gn: 10 8 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.8 27.4 B 29.2 29.2 mn:A 1.5 1.0 B 0.8 1.2 gn: 11 7 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.1 28.1 B 29.0 30.5 mn:A 0.3 -0.1 B 0.4 0.2 gn: 6 9 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.7 29.9 B 32.2 29.9 mn:A 0.1 -0.6 B -0.1 0.3 gn: 7 10 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.0 30.6 B 33.5 29.9 mn:A 0.2 -0.4 B -0.2 -0.2 gn: 9 11 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.6 29.9 B 30.4 31.6 mn:A -0.0 0.1 B 0.1 0.6 gn: 9 11 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.9 30.9 B 29.8 29.9 mn:A -0.1 0.7 B 0.4 -0.3 gn: 5 6 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.6 29.5 B 31.5 30.4 mn:A 0.1 0.1 B -0.1 0.6 gn: 7 8 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.5 30.2 B 28.9 28.9 mn:A 0.8 -0.2 B 1.3 0.6 gn: 7 26 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.3 30.9 B 28.9 28.7 mn:A 1.1 -0.1 B -1.2 0.7 gn: 7 27 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.1 29.9 B 30.8 31.9 mn:A -0.1 1.6 B -0.2 -0.2 gn: 7 13 2013-Sep-25 23:13:40 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.1 28.0 B 30.0 30.2 mn:A 1.0 0.7 B -1.1 -0.9 gn: 8 14 2013-Sep-25 23:13:40 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-25 23:13:40 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2013-Sep-25 23:13:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-25 23:13:41 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-25 23:13:41 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-25 23:13:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:13:41 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-25 23:13:41 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 23:13:41 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-25 23:13:41 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-25 23:13:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:13:41 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-25 23:13:41 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:13:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:13:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:13:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:13:41 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-25 23:13:41 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-25 23:13:41 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-25 23:13:41 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 23:13:41 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 23:13:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 23:13:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:13:41 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 23:13:41 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2013-Sep-25 23:13:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 23:13:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 23:13:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:13:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:42 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 23:13:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 23:13:42 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 23:13:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:13:42 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 23:13:42 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:13:42 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:13:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:13:42 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:13:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 23:13:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:13:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:13:42 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:13:42 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:13:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20130925.a2048.0009.fits 2013-Sep-25 23:13:42 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:13:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:13:42 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:13:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:13:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 23:13:42 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-25 23:13:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-25 23:13:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-25 23:13:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 23:13:42 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2013-Sep-25 23:13:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130925.a2048.0009.fits} 2013-Sep-25 23:13:42 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 23:13:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-25 23:13:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 23:13:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 23:13:42 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2013-Sep-25 23:13:43 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-25 23:13:43 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 23:13:43 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2013-Sep-25 23:13:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-25 23:13:43 LOG5 log_alfabeam: Parameters: 23.151055555555551 7.6207499999999992 23.117687 2013.7363938322305 22.399904 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 0 23.151055555555509 7.620750000000007 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 1 23.149824934542902 7.725578868590633 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 2 23.145237266092678 7.656594602189141 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 3 23.146426420834427 7.551652132026592 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 4 23.152301402133077 7.515948035804005 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 5 23.156912903406006 7.585585782019849 2013-Sep-25 23:13:43 LOG4 log_alfabeam: ALFABEAM 6 23.155625641034611 7.690269166853676 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: object=AGES7619_p1_103 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: patternid=326800187 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: scanid=326800188 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: topoafreqhz=1456214704.0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: topobfreqhz=1306214704.0 2013-Sep-25 23:13:43 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 23:13:43 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 23:13:43 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_103:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326800187:scanid=326800188:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214704.0:topobfreqhz=1306214704.0:filetype=1 2013-Sep-25 23:13:43 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 23:13:43 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2013-Sep-25 23:13:43 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 23:13:43 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 23:13:43 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2013-Sep-25 23:13:43 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 23:13:43 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 23:13:44 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 23:13:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 23:13:44 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2013-Sep-25 23:13:44 LOG4 from_mock: From MOCK: starok 2013-Sep-25 23:13:44 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 23:13:44 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2013-Sep-25 23:13:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 23:13:44 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800188 2013-Sep-25 23:13:44 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 23:13:44 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2013-Sep-25 23:13:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 23:13:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 23:13:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 23:13:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-25 23:13:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11625.00 2013-Sep-25 23:13:46 INFO2 got_mock_message: Mock spectrometer start file number is 02400 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 23:13:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 23:13:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:49 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:13:49.01 2013-Sep-25 23:13:49 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380165229.01 Wed Sep 25 23:13:49 2013 2013-Sep-25 23:13:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:13:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 23:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.528 (still bad) 2013-Sep-25 23:13:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:13:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:13:55 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:13:55 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:13:55 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2013-Sep-25 23:13:55 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:13:55 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2013-Sep-25 23:13:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-25 23:13:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 23:13:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 23:13:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 23:13:55 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2013-Sep-25 23:13:55 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 23:13:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 23:13:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 23:13:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 23:13:55 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2013-Sep-25 23:13:55 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-25 23:13:55 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 23:13:55 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2013-Sep-25 23:13:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-25 23:13:55 LOG5 log_alfabeam: Parameters: 23.151055555555551 7.6207499999999992 23.121030 2013.7363942124875 22.399904 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 0 23.151055555555530 7.620750000000001 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 1 23.149856510889240 7.725659702092021 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 2 23.145248117691786 7.656981460808518 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 3 23.146405661614711 7.551960886236744 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 4 23.152269853337820 7.515866195855773 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 5 23.156902263849048 7.585196510223013 2013-Sep-25 23:13:55 LOG4 log_alfabeam: ALFABEAM 6 23.155646514375871 7.689964457811739 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: object=AGES7619_p1_103 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: patternid=326800187 2013-Sep-25 23:13:55 TEST take_mock_data: PSET configuration: scanid=326800189 2013-Sep-25 23:13:56 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 23:13:56 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 23:13:56 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 23:13:56 TEST take_mock_data: PSET configuration: topoafreqhz=1456214704.0 2013-Sep-25 23:13:56 TEST take_mock_data: PSET configuration: topobfreqhz=1306214704.0 2013-Sep-25 23:13:56 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 23:13:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 23:13:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_103:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326800187:scanid=326800189:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214704.0:topobfreqhz=1306214704.0:filetype=1 2013-Sep-25 23:13:56 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 23:13:56 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2013-Sep-25 23:13:56 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 23:13:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 23:13:56 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2013-Sep-25 23:13:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 23:13:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 23:13:56 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 23:13:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 23:13:56 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2013-Sep-25 23:13:56 LOG4 from_mock: From MOCK: starok 2013-Sep-25 23:13:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 23:13:56 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2013-Sep-25 23:13:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 23:13:56 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800189 2013-Sep-25 23:13:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 23:13:57 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2013-Sep-25 23:13:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 23:13:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 23:13:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 23:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.528 (still bad) 2013-Sep-25 23:13:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-25 23:13:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11638.00 2013-Sep-25 23:13:58 INFO2 got_mock_message: Mock spectrometer start file number is 02500 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 23:13:58 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 23:13:58 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:13:58 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:14:01 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:14:01.01 2013-Sep-25 23:14:01 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380165241.01 Wed Sep 25 23:14:01 2013 2013-Sep-25 23:14:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 23:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.528 (still bad) 2013-Sep-25 23:14:03 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-25 23:14:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:14:03 LOG3 WAPP=1-save_rfcalc: Channel 4: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:14:03 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:14:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:14:07 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:14:07 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:14:07 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2013-Sep-25 23:14:07 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:14:07 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2013-Sep-25 23:14:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 23:14:07 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-25 23:14:07 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Sep-25 23:14:07 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-25 23:14:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:14:07 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-25 23:14:07 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Sep-25 23:14:07 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-25 23:14:07 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 355.99 and ZA = 10.68 2013-Sep-25 23:14:07 LOG3 track_source: Calling 'track_source AGES7619_p1_103 355.99 10.6833536162 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:14:07 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:14:07 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Sep-25 23:14:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_103} INFO {Slewing to source 'AGES7619_p1_103' ...} 2013-Sep-25 23:14:07 INFO1 track_source: Starting to track AGES7619_p1_103 2013-Sep-25 23:14:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_103" 2013-Sep-25 23:14:07 LOG3 vw_send: To DATATAKING: set ra 355.99 2013-Sep-25 23:14:07 LOG3 vw_send: To DATATAKING: set dec 10.6833536162 2013-Sep-25 23:14:07 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:14:07 LOG3 vw_send: To DATATAKING: pnt tr 355.99 10.6833536162 -CF 2013-Sep-25 23:14:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:14:07 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:14:07 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Sep-25 23:14:07 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:14:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:14:07 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:14:07 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Sep-25 23:14:08 LOG1 fixed_driftmap: Parameters: HA = -00:02:59.9 Start = 23:07:43.7 LST = 23:07:27.7 diff = 16.0 secs 2013-Sep-25 23:14:08 INFO2 fixed_driftmap: Waiting 14 seconds for RA 23:10:44 2013-Sep-25 23:14:08 INFO2 lstwait: Waiting for 14 secs from LST 23:07:28 to LST 23:07:42 ... 2013-Sep-25 23:14:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.959536846145863 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 23:14:08 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-25 23:14:08 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_103" 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: set ra 355.99 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: vw% 355.99 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: set dec 10.6833536162 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: 10.6833536162 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: pnt tr 355.99 10.6833536162 -CF 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:14:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:14:22 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-25 23:14:22 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Sep-25 23:14:22 LOG4 lstwait: Finished waiting 1.04 seconds late 2013-Sep-25 23:14:22 INFO3 lstwait: Finished waiting 2013-Sep-25 23:14:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:14:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-25 23:14:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-25 23:14:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-25 23:14:22 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-25 23:14:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 23:14:22 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Sep-25 23:14:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-25 23:14:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: object=AGES7619_p1_103 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: patternid=326800190 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: scanid=326800190 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: topoafreqhz=1456214704.0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: topobfreqhz=1306214704.0 2013-Sep-25 23:14:22 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 23:14:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 23:14:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_103:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326800190:scanid=326800190:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214704.0:topobfreqhz=1306214704.0:filetype=1 2013-Sep-25 23:14:22 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 23:14:22 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2013-Sep-25 23:14:23 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 23:14:23 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 23:14:23 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2013-Sep-25 23:14:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 23:14:23 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 23:14:23 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-25 23:14:23 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 23:14:23 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Sep-25 23:14:23 LOG4 from_mock: From MOCK: starok 2013-Sep-25 23:14:23 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 23:14:23 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Sep-25 23:14:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 23:14:23 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326800190 2013-Sep-25 23:14:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 23:14:23 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2013-Sep-25 23:14:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 23:14:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 23:14:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 23:14:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-25 23:14:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11664.00 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 23:14:25 INFO2 got_mock_message: Mock spectrometer start file number is 02600 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 23:14:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-25 23:14:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1381.214704 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.173 (still bad) 2013-Sep-25 23:14:28 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:14:28.00 2013-Sep-25 23:14:28 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380165268.00 Wed Sep 25 23:14:28 2013 2013-Sep-25 23:14:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 23:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.132 (still bad) 2013-Sep-25 23:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.147 (still bad) 2013-Sep-25 23:14:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:14:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-25 23:14:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.135 0.967 0.952 2013-Sep-25 23:14:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.080 0.925 1.042 2013-Sep-25 23:14:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.040 1.088 0.070 2013-Sep-25 23:14:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.054 0.937 0.979 2013-Sep-25 23:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.172 (still bad) 2013-Sep-25 23:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.240 (still bad) 2013-Sep-25 23:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.288 (still bad) 2013-Sep-25 23:14:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.303 (still bad) 2013-Sep-25 23:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.273 (still bad) 2013-Sep-25 23:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.227 (still bad) 2013-Sep-25 23:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.185 (still bad) 2013-Sep-25 23:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.176 (still bad) 2013-Sep-25 23:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.194 (still bad) 2013-Sep-25 23:14:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.219 (still bad) 2013-Sep-25 23:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.268 (still bad) 2013-Sep-25 23:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.353 (still bad) 2013-Sep-25 23:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.381 (still bad) 2013-Sep-25 23:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.428 (still bad) 2013-Sep-25 23:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.412 (still bad) 2013-Sep-25 23:15:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.361 (still bad) 2013-Sep-25 23:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.305 (still bad) 2013-Sep-25 23:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.277 (still bad) 2013-Sep-25 23:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.215 (still bad) 2013-Sep-25 23:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.196 (still bad) 2013-Sep-25 23:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.208 (still bad) 2013-Sep-25 23:15:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.231 (still bad) 2013-Sep-25 23:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.220 (still bad) 2013-Sep-25 23:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.183 (still bad) 2013-Sep-25 23:15:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-25 23:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.172 (still bad) 2013-Sep-25 23:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.161 (still bad) 2013-Sep-25 23:15:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.155 (still bad) 2013-Sep-25 23:15:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:15:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.141 0.971 0.955 2013-Sep-25 23:15:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.097 0.950 1.067 2013-Sep-25 23:15:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.005 1.023 0.920 0.067 2013-Sep-25 23:15:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.059 0.937 0.984 2013-Sep-25 23:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.157 (still bad) 2013-Sep-25 23:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.153 (still bad) 2013-Sep-25 23:15:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 16-31 errors 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 2-3 errors 2013-Sep-25 23:15:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2013-Sep-25 23:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.157 (still bad) 2013-Sep-25 23:15:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.162 (still bad) 2013-Sep-25 23:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.158 (still bad) 2013-Sep-25 23:15:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.142 (still bad) 2013-Sep-25 23:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:16:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2013-Sep-25 23:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.161 (still bad) 2013-Sep-25 23:16:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.172 (still bad) 2013-Sep-25 23:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.171 (still bad) 2013-Sep-25 23:16:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.161 (still bad) 2013-Sep-25 23:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.159 (still bad) 2013-Sep-25 23:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.182 (still bad) 2013-Sep-25 23:16:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.159 (still bad) 2013-Sep-25 23:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.175 (still bad) 2013-Sep-25 23:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.166 (still bad) 2013-Sep-25 23:16:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.163 (still bad) 2013-Sep-25 23:16:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.163 (still bad) 2013-Sep-25 23:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.167 (still bad) 2013-Sep-25 23:16:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.160 (still bad) 2013-Sep-25 23:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.177 (still bad) 2013-Sep-25 23:16:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:16:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:16:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.147 0.966 0.957 2013-Sep-25 23:16:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.099 0.938 1.062 2013-Sep-25 23:16:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.027 0.918 0.067 2013-Sep-25 23:16:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.062 0.937 0.988 2013-Sep-25 23:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.156 (still bad) 2013-Sep-25 23:16:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.171 (still bad) 2013-Sep-25 23:16:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.154 (still bad) 2013-Sep-25 23:16:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:17:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2013-Sep-25 23:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.174 (still bad) 2013-Sep-25 23:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:17:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.155 (still bad) 2013-Sep-25 23:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:17:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2013-Sep-25 23:17:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 8-15 errors 2013-Sep-25 23:17:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2013-Sep-25 23:17:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2013-Sep-25 23:17:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2013-Sep-25 23:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.163 (still bad) 2013-Sep-25 23:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:17:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-25 23:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.165 (still bad) 2013-Sep-25 23:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:17:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.130 (still bad) 2013-Sep-25 23:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.163 (still bad) 2013-Sep-25 23:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:17:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:17:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.142 0.965 0.954 2013-Sep-25 23:17:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.088 0.933 1.053 2013-Sep-25 23:17:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.033 1.051 0.931 0.067 2013-Sep-25 23:17:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 1.052 0.931 0.978 2013-Sep-25 23:17:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-25 23:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-25 23:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:17:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-25 23:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.166 (still bad) 2013-Sep-25 23:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:18:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.150 (still bad) 2013-Sep-25 23:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:18:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:18:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2013-Sep-25 23:18:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 1 error 2013-Sep-25 23:18:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2013-Sep-25 23:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:18:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-25 23:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:18:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:18:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.138 0.965 0.949 2013-Sep-25 23:18:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.082 0.928 1.047 2013-Sep-25 23:18:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 1.022 0.923 0.067 2013-Sep-25 23:18:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 1.052 0.934 0.979 2013-Sep-25 23:18:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-25 23:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:18:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:19:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:19:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2013-Sep-25 23:19:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2013-Sep-25 23:19:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2013-Sep-25 23:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-25 23:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:19:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.143 (still bad) 2013-Sep-25 23:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:19:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.148 (still bad) 2013-Sep-25 23:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:19:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:19:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:19:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.127 0.968 0.949 2013-Sep-25 23:19:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 1.086 0.927 1.049 2013-Sep-25 23:19:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.003 1.025 0.919 0.067 2013-Sep-25 23:19:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.057 0.937 0.982 2013-Sep-25 23:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.148 (still bad) 2013-Sep-25 23:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:19:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.149 (still bad) 2013-Sep-25 23:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:20:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.165 (still bad) 2013-Sep-25 23:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:20:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-25 23:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.137 (still bad) 2013-Sep-25 23:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:20:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-25 23:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.135 (still bad) 2013-Sep-25 23:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:20:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-25 23:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.133 (still bad) 2013-Sep-25 23:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:20:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-25 23:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:20:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:20:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.142 0.976 0.961 2013-Sep-25 23:20:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.086 0.933 1.049 2013-Sep-25 23:20:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 1.008 0.913 0.067 2013-Sep-25 23:20:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 1.044 0.926 0.968 2013-Sep-25 23:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.130 (still bad) 2013-Sep-25 23:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:20:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.118 (still bad) 2013-Sep-25 23:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-25 23:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:21:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.119 (still bad) 2013-Sep-25 23:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.139 (still bad) 2013-Sep-25 23:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:21:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:21:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.157 (still bad) 2013-Sep-25 23:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:21:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:21:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 23:21:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.156 0.988 0.972 2013-Sep-25 23:21:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.082 0.931 1.045 2013-Sep-25 23:21:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 1.018 0.923 0.069 2013-Sep-25 23:21:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.074 0.953 0.998 2013-Sep-25 23:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:21:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.154 (still bad) 2013-Sep-25 23:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:22:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.163 (still bad) 2013-Sep-25 23:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:22:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-25 23:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:22:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.161 (still bad) 2013-Sep-25 23:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.144 (still bad) 2013-Sep-25 23:22:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:22:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.074 < 0.75)! 2013-Sep-25 23:22:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.157 0.989 0.969 2013-Sep-25 23:22:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.097 0.946 1.062 2013-Sep-25 23:22:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.033 0.938 0.074 2013-Sep-25 23:22:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 1.075 0.955 0.999 2013-Sep-25 23:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:22:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.157 (still bad) 2013-Sep-25 23:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:23:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-25 23:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-25 23:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.148 (still bad) 2013-Sep-25 23:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.166 (still bad) 2013-Sep-25 23:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.167 (still bad) 2013-Sep-25 23:23:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.151 (still bad) 2013-Sep-25 23:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.174 (still bad) 2013-Sep-25 23:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.158 (still bad) 2013-Sep-25 23:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.165 (still bad) 2013-Sep-25 23:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-25 23:23:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-25 23:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.137 (still bad) 2013-Sep-25 23:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:23:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-25 23:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:23:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.141 (still bad) 2013-Sep-25 23:23:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:23:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.160 0.986 0.972 2013-Sep-25 23:23:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.107 0.937 1.061 2013-Sep-25 23:23:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.018 0.919 0.067 2013-Sep-25 23:23:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.077 0.951 1.001 2013-Sep-25 23:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.158 (still bad) 2013-Sep-25 23:23:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.140 (still bad) 2013-Sep-25 23:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:24:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.137 (still bad) 2013-Sep-25 23:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:24:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-25 23:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:24:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.142 (still bad) 2013-Sep-25 23:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:24:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.144 (still bad) 2013-Sep-25 23:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.141 (still bad) 2013-Sep-25 23:24:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:24:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 16-31 errors 2013-Sep-25 23:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.148 (still bad) 2013-Sep-25 23:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:24:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:24:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.139 0.964 0.953 2013-Sep-25 23:24:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.087 0.934 1.052 2013-Sep-25 23:24:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.022 0.915 0.067 2013-Sep-25 23:24:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.062 0.937 0.986 2013-Sep-25 23:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-25 23:24:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:25:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2013-Sep-25 23:25:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2013-Sep-25 23:25:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2013-Sep-25 23:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.159 (still bad) 2013-Sep-25 23:25:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-25 23:25:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:25:12 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2013-Sep-25 23:25:12 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2013-Sep-25 23:25:12 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2013-Sep-25 23:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.164 (still bad) 2013-Sep-25 23:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.151 (still bad) 2013-Sep-25 23:25:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 128-255 errors 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 128-255 errors 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 64-127 errors 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 256-511 errors 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 128-255 errors 2013-Sep-25 23:25:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 256-511 errors 2013-Sep-25 23:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.158 (still bad) 2013-Sep-25 23:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-25 23:25:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 128-255 errors 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 256-511 errors 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 64-127 errors 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 128-255 errors 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 256-511 errors 2013-Sep-25 23:25:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 256-511 errors 2013-Sep-25 23:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.155 (still bad) 2013-Sep-25 23:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:25:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 64-127 errors 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 64-127 errors 2013-Sep-25 23:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 128-255 errors 2013-Sep-25 23:25:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2013-Sep-25 23:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.151 (still bad) 2013-Sep-25 23:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:25:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:25:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.132 0.960 0.950 2013-Sep-25 23:25:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 1.077 0.922 1.035 2013-Sep-25 23:25:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.033 0.912 0.067 2013-Sep-25 23:25:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 1.052 0.930 0.976 2013-Sep-25 23:25:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 8-15 errors 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 128-255 errors 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 64-127 errors 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 256-511 errors 2013-Sep-25 23:26:00 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 32-63 errors 2013-Sep-25 23:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-25 23:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:26:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-25 23:26:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2013-Sep-25 23:26:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2013-Sep-25 23:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:26:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-25 23:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:26:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:26:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-25 23:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:26:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:26:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:26:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.127 0.965 0.951 2013-Sep-25 23:26:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.084 0.931 1.050 2013-Sep-25 23:26:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 1.008 0.915 0.067 2013-Sep-25 23:26:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 1.045 0.931 0.972 2013-Sep-25 23:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-25 23:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:27:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.145 (still bad) 2013-Sep-25 23:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:27:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.148 (still bad) 2013-Sep-25 23:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.155 (still bad) 2013-Sep-25 23:27:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-25 23:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.156 (still bad) 2013-Sep-25 23:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.156 (still bad) 2013-Sep-25 23:27:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-25 23:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.157 (still bad) 2013-Sep-25 23:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:27:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:27:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.129 0.966 0.949 2013-Sep-25 23:27:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 1.086 0.928 1.042 2013-Sep-25 23:27:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.025 0.918 0.067 2013-Sep-25 23:27:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.048 0.935 0.975 2013-Sep-25 23:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.157 (still bad) 2013-Sep-25 23:28:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.159 (still bad) 2013-Sep-25 23:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.154 (still bad) 2013-Sep-25 23:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.165 (still bad) 2013-Sep-25 23:28:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2013-Sep-25 23:28:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2013-Sep-25 23:28:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2013-Sep-25 23:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.162 (still bad) 2013-Sep-25 23:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.154 (still bad) 2013-Sep-25 23:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.170 (still bad) 2013-Sep-25 23:28:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2013-Sep-25 23:28:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2013-Sep-25 23:28:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2013-Sep-25 23:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.153 (still bad) 2013-Sep-25 23:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.161 (still bad) 2013-Sep-25 23:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.156 (still bad) 2013-Sep-25 23:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:28:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.168 (still bad) 2013-Sep-25 23:28:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2013-Sep-25 23:28:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2013-Sep-25 23:28:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2013-Sep-25 23:28:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2013-Sep-25 23:28:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2013-Sep-25 23:28:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2013-Sep-25 23:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.163 (still bad) 2013-Sep-25 23:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:28:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.169 (still bad) 2013-Sep-25 23:28:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2013-Sep-25 23:28:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2013-Sep-25 23:28:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2013-Sep-25 23:28:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 32-63 errors 2013-Sep-25 23:28:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2013-Sep-25 23:28:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2013-Sep-25 23:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.154 (still bad) 2013-Sep-25 23:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:29:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:29:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.128 0.968 0.953 2013-Sep-25 23:29:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 1.091 0.933 1.053 2013-Sep-25 23:29:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.020 0.919 0.067 2013-Sep-25 23:29:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 1.048 0.934 0.975 2013-Sep-25 23:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.158 (still bad) 2013-Sep-25 23:29:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 8-15 errors 2013-Sep-25 23:29:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2013-Sep-25 23:29:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2013-Sep-25 23:29:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2013-Sep-25 23:29:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2013-Sep-25 23:29:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2013-Sep-25 23:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.152 (still bad) 2013-Sep-25 23:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:29:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.164 (still bad) 2013-Sep-25 23:29:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2013-Sep-25 23:29:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2013-Sep-25 23:29:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2013-Sep-25 23:29:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2013-Sep-25 23:29:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2013-Sep-25 23:29:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2013-Sep-25 23:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.154 (still bad) 2013-Sep-25 23:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.161 (still bad) 2013-Sep-25 23:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.157 (still bad) 2013-Sep-25 23:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.141 (still bad) 2013-Sep-25 23:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.168 (still bad) 2013-Sep-25 23:29:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2013-Sep-25 23:29:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2013-Sep-25 23:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.137 (still bad) 2013-Sep-25 23:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.157 (still bad) 2013-Sep-25 23:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.135 (still bad) 2013-Sep-25 23:29:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.164 (still bad) 2013-Sep-25 23:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.136 (still bad) 2013-Sep-25 23:29:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.170 (still bad) 2013-Sep-25 23:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.158 (still bad) 2013-Sep-25 23:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.154 (still bad) 2013-Sep-25 23:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:30:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-25 23:30:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.161 0.981 0.969 2013-Sep-25 23:30:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.099 0.937 1.058 2013-Sep-25 23:30:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 1.040 0.926 0.070 2013-Sep-25 23:30:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.075 0.947 0.998 2013-Sep-25 23:30:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:30:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2013-Sep-25 23:30:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2013-Sep-25 23:30:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 32-63 errors 2013-Sep-25 23:30:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2013-Sep-25 23:30:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2013-Sep-25 23:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.152 (still bad) 2013-Sep-25 23:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.152 (still bad) 2013-Sep-25 23:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.165 (still bad) 2013-Sep-25 23:30:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.148 (still bad) 2013-Sep-25 23:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.156 (still bad) 2013-Sep-25 23:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.166 (still bad) 2013-Sep-25 23:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.161 (still bad) 2013-Sep-25 23:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.147 (still bad) 2013-Sep-25 23:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.166 (still bad) 2013-Sep-25 23:30:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.151 (still bad) 2013-Sep-25 23:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.159 (still bad) 2013-Sep-25 23:30:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.166 (still bad) 2013-Sep-25 23:31:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:31:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:31:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.134 0.966 0.953 2013-Sep-25 23:31:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 1.073 0.920 1.033 2013-Sep-25 23:31:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.018 0.916 0.067 2013-Sep-25 23:31:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 1.059 0.938 0.983 2013-Sep-25 23:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.155 (still bad) 2013-Sep-25 23:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.163 (still bad) 2013-Sep-25 23:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.156 (still bad) 2013-Sep-25 23:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.164 (still bad) 2013-Sep-25 23:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-25 23:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.140 (still bad) 2013-Sep-25 23:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.137 (still bad) 2013-Sep-25 23:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-25 23:31:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.139 (still bad) 2013-Sep-25 23:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.135 (still bad) 2013-Sep-25 23:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.137 (still bad) 2013-Sep-25 23:32:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:32:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 1.151 0.975 0.964 2013-Sep-25 23:32:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.089 0.919 1.030 2013-Sep-25 23:32:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.021 1.010 0.912 0.067 2013-Sep-25 23:32:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.068 0.940 0.992 2013-Sep-25 23:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-25 23:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-25 23:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.138 (still bad) 2013-Sep-25 23:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-25 23:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.133 (still bad) 2013-Sep-25 23:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-25 23:32:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.142 (still bad) 2013-Sep-25 23:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.159 (still bad) 2013-Sep-25 23:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-25 23:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-25 23:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.156 (still bad) 2013-Sep-25 23:32:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-25 23:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.158 (still bad) 2013-Sep-25 23:32:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-25 23:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.150 (still bad) 2013-Sep-25 23:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:33:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:33:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.147 0.969 0.958 2013-Sep-25 23:33:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.086 0.926 1.045 2013-Sep-25 23:33:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.031 0.917 0.067 2013-Sep-25 23:33:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 1.056 0.933 0.981 2013-Sep-25 23:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.158 (still bad) 2013-Sep-25 23:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.155 (still bad) 2013-Sep-25 23:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-25 23:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.156 (still bad) 2013-Sep-25 23:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.162 (still bad) 2013-Sep-25 23:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-25 23:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.165 (still bad) 2013-Sep-25 23:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:34:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:34:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.162 0.966 0.950 2013-Sep-25 23:34:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.083 0.927 1.045 2013-Sep-25 23:34:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.029 0.912 0.067 2013-Sep-25 23:34:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.059 0.939 0.986 2013-Sep-25 23:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.159 (still bad) 2013-Sep-25 23:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.171 (still bad) 2013-Sep-25 23:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-25 23:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-25 23:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-25 23:34:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:34:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:34:29 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:34:29 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:34:29 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2013-Sep-25 23:34:29 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:34:29 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Sep-25 23:34:29 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-25 23:34:29 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2013-Sep-25 23:34:29 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-25 23:34:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 23:34:29 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-25 23:34:29 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2013-Sep-25 23:34:29 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2013-Sep-25 23:34:29 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES7619_p1_101) < 233043 THEN' 2013-Sep-25 23:34:31 LOG3 is_if_valid: Current source data: up 382.1 11.4 UP - - 51 1.1 2013-Sep-25 23:34:31 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_101) < 233043 2013-Sep-25 23:34:31 INFO5 is_if_valid: Condition parsed as: 23.483079333333336 < 23.511944444444445 2013-Sep-25 23:34:31 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=25.27 alfaangle=-1.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_101 ra=231000.00 dec=74000.00' 2013-Sep-25 23:34:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-25 23:34:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 23:34:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 25.27 -1.9 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_101 231000.00 74000.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:34:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-25 23:34:31 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2013-Sep-25 23:34:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_103' 2013-Sep-25 23:34:32 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-25 23:34:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_101} 2013-Sep-25 23:34:32 INFO3 fixed_driftmap: Sending telescope to Az = 25.27 and ZA = 11.67 2013-Sep-25 23:34:32 LOG3 track_source: Calling 'track_source AGES7619_p1_101 25.27 11.6694387222 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:34:32 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:34:32 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2013-Sep-25 23:34:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_101} INFO {Slewing to source 'AGES7619_p1_101' ...} 2013-Sep-25 23:34:32 INFO1 track_source: Starting to track AGES7619_p1_101 2013-Sep-25 23:34:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_101" 2013-Sep-25 23:34:32 LOG3 vw_send: To DATATAKING: set ra 25.27 2013-Sep-25 23:34:32 LOG3 vw_send: To DATATAKING: set dec 11.6694387222 2013-Sep-25 23:34:32 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:34:32 LOG3 vw_send: To DATATAKING: pnt tr 25.27 11.6694387222 -CF 2013-Sep-25 23:34:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:34:32 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:34:32 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2013-Sep-25 23:34:32 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:34:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:34:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:34:32 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2013-Sep-25 23:34:32 START begin_task: Starting task 'rotate ALFA to -1.9 degrees' 2013-Sep-25 23:34:32 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Sep-25 23:34:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -1.9 degrees ...} 2013-Sep-25 23:34:32 INFO2 rotate_alfa: ALFA commanded to -1.9 degrees 2013-Sep-25 23:34:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -1.9 REPLY 2013-Sep-25 23:34:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 23:34:32 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 23:34:32 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Sep-25 23:34:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_101" 2013-Sep-25 23:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:34:32 LOG4 got_cormsg: From DATATAKING: set ra 25.27 2013-Sep-25 23:34:32 LOG4 got_cormsg: From DATATAKING: vw% 25.27 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: set dec 11.6694387222 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: 11.6694387222 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: pnt tr 25.27 11.6694387222 -CF 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:34:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:34:47 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 23:34:47 INFO3 alfa_motor: ALFA rotator in-position -1.90 degrees 2013-Sep-25 23:34:47 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 23:34:47 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Sep-25 23:34:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:34:47 STOP finish_task: Finishing task 'rotate ALFA to -1.9 degrees' 2013-Sep-25 23:34:47 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Sep-25 23:34:47 INFO2 finish_task: DONE finished configuration: rotating ALFA to -1.9 degrees 2013-Sep-25 23:34:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:34:47 STOP end_task: Finishing task 'rotate ALFA to -1.9 degrees' with status 'OK' 2013-Sep-25 23:34:47 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Sep-25 23:34:47 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 23:34:47 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Sep-25 23:34:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 23:34:47 LOG3 waittrk: Start waittrk 5 2013-Sep-25 23:34:47 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 23:34:47 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2013-Sep-25 23:34:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 23:34:52 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2013-Sep-25 23:34:52 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 23:34:52 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2013-Sep-25 23:35:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 23:35:57 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2013-Sep-25 23:35:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:35:57 INFO2 waittrk: Now tracking AGES7619_p1_101 2013-Sep-25 23:35:57 LOG4 waittrk: Current telescope position: Az = 385.00 ZA = 11.64 2013-Sep-25 23:35:57 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 23:35:57 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Sep-25 23:35:57 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 23:35:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:35:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 23:35:57 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Sep-25 23:35:57 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 23:35:58 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Sep-25 23:35:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 23:35:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 23:35:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:35:58 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 23:35:58 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Sep-25 23:35:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 23:35:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:35:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:35:58 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 23:35:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 23:35:58 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Sep-25 23:35:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 23:35:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:35:59 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 23:35:59 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:35:59 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2013-Sep-25 23:35:59 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:35:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:35:59 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2013-Sep-25 23:35:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:35:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 23:35:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:35:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:35:59 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:35:59 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2013-Sep-25 23:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:35:59 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:35:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:35:59 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2013-Sep-25 23:35:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:35:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:35:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 23:35:59 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Sep-25 23:35:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-25 23:35:59 INFO2 astwait: Waiting for 19 seconds from 03:35:59 to 03:36:18 UTC ... 2013-Sep-25 23:35:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 23:35:59 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-25 23:35:59 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2013-Sep-25 23:36:18 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-25 23:36:18 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2013-Sep-25 23:36:18 INFO3 astwait: Finished waiting 2013-Sep-25 23:36:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:36:18 LOG5 dopset_later: Calling 'dopset_later 60.837869248596959' 2013-Sep-25 23:36:18 INFO3 dopset_later: Setting Doppler correction for 23:37:18 (60.8 seconds from now) 2013-Sep-25 23:36:18 LOG5 antvel: Calling 'antvel 25.270000 11.669439 F Heliocentric 60.837869248596959' 2013-Sep-25 23:36:18 LOG2 antvel: Transforming current Az = 25.27 ZA = 11.67 to apparent RA = 23:10:43.5 Dec = +07:44:43.3 2013-Sep-25 23:36:18 LOG2 antvel: Parameters to Doppler: Heliocentric 99438 2013 268 0.0 2013-Sep-25 23:36:18 INFO5 antvel: Computed antenna velocity: +6.27512 km/s 2013-Sep-25 23:36:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=6.2751189757999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-25 23:36:18 INFO4 dopset_gen: New sky frequencies: 1381.214518 1381.214518 1381.214518 1381.214518 1381.214518 1381.214518 1381.214518 1381.214518 1381.214518 2013-Sep-25 23:36:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.214518 sky0=1381.214518 sky1=1381.214518 sky2=1381.214518 sky3=1381.214518 sky4=1381.214518 sky5=1381.214518 sky6=1381.214518 sky7=1381.214518 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 23:36:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.214518 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631214518.0} 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 23:36:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-25 23:36:18 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-25 23:36:18 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:03.9 Dec = +07:40:14.7 2013-Sep-25 23:36:18 LOG3 track_source: Calling 'track_source AGES7619_p1_101 230903.9 074014.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:36:18 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:36:18 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2013-Sep-25 23:36:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_101} INFO {Slewing to source 'AGES7619_p1_101' ...} 2013-Sep-25 23:36:18 INFO1 track_source: Starting to track AGES7619_p1_101 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_101" 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: set ra 230903.9 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: set dec 074014.7 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: pnt tr 230903.9 074014.7 -CJ 2013-Sep-25 23:36:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:36:18 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:36:18 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2013-Sep-25 23:36:18 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:36:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:36:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:36:19 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2013-Sep-25 23:36:19 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 23:36:19 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2013-Sep-25 23:36:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 23:36:19 LOG3 waittrk: Start waittrk 5 2013-Sep-25 23:36:19 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 23:36:19 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631214518.0} 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_101" 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: set ra 230903.9 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% 230903.9 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: set dec 074014.7 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: 074014.7 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: pnt tr 230903.9 074014.7 -CJ 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:36:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:36:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 23:36:24 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Sep-25 23:36:24 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 23:36:24 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2013-Sep-25 23:36:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 23:36:25 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2013-Sep-25 23:36:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:36:25 INFO2 waittrk: Now tracking AGES7619_p1_101 2013-Sep-25 23:36:25 LOG4 waittrk: Current telescope position: Az = 385.09 ZA = 11.64 2013-Sep-25 23:36:25 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 23:36:25 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2013-Sep-25 23:36:25 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 23:36:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:36:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 23:36:25 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2013-Sep-25 23:36:25 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-25 23:36:25 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Sep-25 23:36:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-25 23:36:25 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-25 23:36:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-25 23:36:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-25 23:36:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:36:25 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-25 23:36:26 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2013-Sep-25 23:36:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-25 23:36:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:28 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 23:36:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-25 23:36:28 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2013-Sep-25 23:36:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-25 23:36:28 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 23:36:28 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2013-Sep-25 23:36:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 23:36:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:36:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:36:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:36:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 23:36:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-25 23:36:29 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2013-Sep-25 23:36:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-25 23:36:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-25 23:36:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-25 23:36:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-25 23:36:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-25 23:36:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-25 23:36:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-25 23:36:29 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2013-Sep-25 23:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.067 0.908 ALFA beam 1: 0.958 0.944 2013-Sep-25 23:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.937 1.058 ALFA beam 3: 0.929 1.033 2013-Sep-25 23:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.049 0.995 ALFA beam 5: 0.937 0.067 2013-Sep-25 23:36:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.124 1.106 ALFA beam 7: 0.976 1.026 2013-Sep-25 23:36:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 23:36:29 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2013-Sep-25 23:36:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-25 23:36:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:36:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 23:36:29 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2013-Sep-25 23:36:29 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-25 23:36:29 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Sep-25 23:36:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 23:36:30 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-25 23:36:30 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-25 23:36:30 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-25 23:36:30 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2013-Sep-25 23:36:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:36:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.908 0.958 0.944 2013-Sep-25 23:36:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.058 0.929 1.033 2013-Sep-25 23:36:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 0.995 0.937 0.067 2013-Sep-25 23:36:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.124 1.106 0.976 1.026 2013-Sep-25 23:36:36 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.8 B 28.2 28.4 mn:A 0.5 0.5 B 0.4 1.0 gn: 8 11 2013-Sep-25 23:36:36 INFO3 from_mock: From MOCK: b0s1g0 rms:A 112.7 107.9 B 156.9 168.0 mn:A 1.2 0.4 B 0.3 0.1 gn: 9 12 2013-Sep-25 23:36:36 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.7 B 31.2 26.2 mn:A -0.0 -0.4 B -0.1 0.9 gn: 10 8 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b1s1g0 rms:A 130.2 121.1 B 129.4 129.8 mn:A 1.3 0.9 B 0.8 1.2 gn: 11 7 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 28.0 B 28.8 30.2 mn:A 0.3 -0.0 B 0.5 0.3 gn: 6 9 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b2s1g0 rms:A 116.6 117.3 B 125.3 116.7 mn:A 0.1 -0.6 B -0.1 0.3 gn: 7 10 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.9 30.5 B 33.2 29.6 mn:A 0.2 -0.3 B -0.3 -0.2 gn: 9 11 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b3s1g0 rms:A 109.1 106.5 B 136.5 142.4 mn:A 0.0 0.3 B 0.1 0.5 gn: 9 11 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.0 28.2 B 29.7 29.8 mn:A -0.1 0.8 B 0.4 -0.3 gn: 4 6 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b4s1g0 rms:A 110.8 101.4 B 107.1 103.7 mn:A 0.1 0.1 B -0.2 0.6 gn: 7 8 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.8 30.5 B 30.7 30.7 mn:A 1.1 -0.2 B 1.3 0.6 gn: 7 26 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b5s1g0 rms:A 91.0 90.4 B 45.2 44.8 mn:A 1.1 -0.1 B -1.2 0.7 gn: 7 27 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.2 27.3 B 27.7 28.6 mn:A -0.0 1.8 B -0.1 -0.1 gn: 6 12 2013-Sep-25 23:36:37 INFO3 from_mock: From MOCK: b6s1g0 rms:A 101.5 91.5 B 157.4 157.8 mn:A 0.9 0.6 B -1.2 -0.9 gn: 8 14 2013-Sep-25 23:36:37 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-25 23:36:37 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2013-Sep-25 23:36:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-25 23:36:37 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-25 23:36:37 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Sep-25 23:36:37 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-25 23:36:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:36:37 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-25 23:36:37 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Sep-25 23:36:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 23:36:37 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-25 23:36:37 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Sep-25 23:36:37 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-25 23:36:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:36:37 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-25 23:36:37 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Sep-25 23:36:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:36:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:36:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:36:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 23:36:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-25 23:36:37 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-25 23:36:37 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2013-Sep-25 23:36:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-25 23:36:37 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 23:36:38 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 23:36:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 23:36:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:36:38 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 23:36:38 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 23:36:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 23:36:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 23:36:38 LOG4 got_cormsg: From DATATAKING: vw% DONE 2013-Sep-25 23:36:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 23:36:38 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 23:36:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:36:38 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 23:36:38 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:36:38 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:36:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:36:38 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:36:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 23:36:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 23:36:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:36:38 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 23:36:38 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:36:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20130925.a2048.0010.fits 2013-Sep-25 23:36:38 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 23:36:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 23:36:38 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 23:36:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 23:36:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 23:36:38 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2013-Sep-25 23:36:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-25 23:36:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-25 23:36:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-25 23:36:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 23:36:39 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Sep-25 23:36:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130925.a2048.0010.fits} 2013-Sep-25 23:36:39 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 23:36:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-25 23:36:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 23:36:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 23:36:39 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Sep-25 23:36:39 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-25 23:36:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 23:36:39 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2013-Sep-25 23:36:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-25 23:36:39 LOG5 log_alfabeam: Parameters: 23.151083333333329 7.6707499999999991 23.500678 2013.7364374033514 -1.900015 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 0 23.151083333333329 7.670749999999996 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 1 23.150672515821174 7.773115911861730 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 2 23.145398490826995 7.705670835112965 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 3 23.145808923562981 7.603124006062106 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 4 23.151544571159945 7.568257752642383 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 5 23.156783503794721 7.636475240130008 2013-Sep-25 23:36:39 LOG4 log_alfabeam: ALFABEAM 6 23.156321951277508 7.738786568517611 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: object=AGES7619_p1_101 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: patternid=326800190 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: scanid=326800191 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 23:36:39 TEST take_mock_data: PSET configuration: topoafreqhz=1456214518.0 2013-Sep-25 23:36:40 TEST take_mock_data: PSET configuration: topobfreqhz=1306214518.0 2013-Sep-25 23:36:40 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 23:36:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 23:36:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_101:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326800190:scanid=326800191:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214518.0:topobfreqhz=1306214518.0:filetype=1 2013-Sep-25 23:36:40 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 23:36:40 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2013-Sep-25 23:36:40 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 23:36:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 23:36:40 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2013-Sep-25 23:36:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 23:36:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 23:36:40 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 23:36:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 23:36:40 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2013-Sep-25 23:36:40 LOG4 from_mock: From MOCK: starok 2013-Sep-25 23:36:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 23:36:40 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2013-Sep-25 23:36:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 23:36:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800191 2013-Sep-25 23:36:40 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 23:36:40 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2013-Sep-25 23:36:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 23:36:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 23:36:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 23:36:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-25 23:36:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13001.00 2013-Sep-25 23:36:42 INFO2 got_mock_message: Mock spectrometer start file number is 02700 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 23:36:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 23:36:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 23:36:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:36:45.02 2013-Sep-25 23:36:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380166605.02 Wed Sep 25 23:36:45 2013 2013-Sep-25 23:36:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214518 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:36:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 23:36:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.535 (still bad) 2013-Sep-25 23:36:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:36:51 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:36:51 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:36:51 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2013-Sep-25 23:36:51 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:36:51 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2013-Sep-25 23:36:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-25 23:36:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 23:36:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 23:36:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 23:36:51 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2013-Sep-25 23:36:51 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 23:36:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 23:36:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 23:36:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 23:36:51 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2013-Sep-25 23:36:51 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-25 23:36:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 23:36:51 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2013-Sep-25 23:36:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-25 23:36:51 LOG5 log_alfabeam: Parameters: 23.151083333333329 7.6707499999999991 23.504299 2013.7364378152963 -1.900015 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 0 23.151083333333322 7.670749999999996 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 1 23.150699982322827 7.773139619544073 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 2 23.145407901742601 7.706007481592167 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 3 23.145790831722472 7.603437325898921 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 4 23.151516984269492 7.568231305129853 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 5 23.156774231131067 7.636136379638560 2013-Sep-25 23:36:51 LOG4 log_alfabeam: ALFABEAM 6 23.156340228932603 7.738474532619448 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: object=AGES7619_p1_101 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: patternid=326800190 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: scanid=326800192 2013-Sep-25 23:36:51 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 23:36:52 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 23:36:52 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 23:36:52 TEST take_mock_data: PSET configuration: topoafreqhz=1456214518.0 2013-Sep-25 23:36:52 TEST take_mock_data: PSET configuration: topobfreqhz=1306214518.0 2013-Sep-25 23:36:52 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 23:36:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 23:36:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_101:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326800190:scanid=326800192:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214518.0:topobfreqhz=1306214518.0:filetype=1 2013-Sep-25 23:36:52 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 23:36:52 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2013-Sep-25 23:36:52 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 23:36:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 23:36:52 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2013-Sep-25 23:36:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 23:36:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 23:36:52 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 23:36:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 23:36:52 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2013-Sep-25 23:36:52 LOG4 from_mock: From MOCK: starok 2013-Sep-25 23:36:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 23:36:52 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2013-Sep-25 23:36:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 23:36:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800192 2013-Sep-25 23:36:53 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 23:36:53 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2013-Sep-25 23:36:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 23:36:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 23:36:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 23:36:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-25 23:36:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13014.00 2013-Sep-25 23:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.535 (still bad) 2013-Sep-25 23:36:54 INFO2 got_mock_message: Mock spectrometer start file number is 02800 2013-Sep-25 23:36:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 23:36:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 23:36:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 23:36:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 23:36:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 23:36:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 23:36:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 23:36:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 23:36:56 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:36:57.00 2013-Sep-25 23:36:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380166617.00 Wed Sep 25 23:36:57 2013 2013-Sep-25 23:36:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214518 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:36:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 23:36:59 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-25 23:36:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:37:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:37:03 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:37:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:37:03 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:37:03 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 23:37:03 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-25 23:37:03 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-25 23:37:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:37:03 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-25 23:37:03 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-25 23:37:03 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 25.27 and ZA = 11.67 2013-Sep-25 23:37:03 LOG3 track_source: Calling 'track_source AGES7619_p1_101 25.27 11.6694387222 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:37:03 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:37:03 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_101} INFO {Slewing to source 'AGES7619_p1_101' ...} 2013-Sep-25 23:37:03 INFO1 track_source: Starting to track AGES7619_p1_101 2013-Sep-25 23:37:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_101" 2013-Sep-25 23:37:03 LOG3 vw_send: To DATATAKING: set ra 25.27 2013-Sep-25 23:37:03 LOG3 vw_send: To DATATAKING: set dec 11.6694387222 2013-Sep-25 23:37:03 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:37:03 LOG3 vw_send: To DATATAKING: pnt tr 25.27 11.6694387222 -CF 2013-Sep-25 23:37:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:37:03 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:37:03 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:37:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:37:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:37:03 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2013-Sep-25 23:37:03 LOG1 fixed_driftmap: Parameters: HA = +00:19:59.8 Start = 23:30:43.4 LST = 23:30:27.5 diff = 15.9 secs 2013-Sep-25 23:37:03 INFO2 fixed_driftmap: Waiting 13.9 seconds for RA 23:10:44 2013-Sep-25 23:37:04 INFO2 lstwait: Waiting for 13.8 secs from LST 23:30:28 to LST 23:30:41 ... 2013-Sep-25 23:37:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.84413224956765 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 23:37:04 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-25 23:37:04 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_101" 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: set ra 25.27 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: vw% 25.27 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: set dec 11.6694387222 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: 11.6694387222 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: pnt tr 25.27 11.6694387222 -CF 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:37:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:37:17 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-25 23:37:18 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Sep-25 23:37:18 LOG4 lstwait: Finished waiting 1.16 seconds late 2013-Sep-25 23:37:18 INFO3 lstwait: Finished waiting 2013-Sep-25 23:37:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:37:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-25 23:37:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-25 23:37:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-25 23:37:18 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-25 23:37:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 23:37:18 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Sep-25 23:37:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-25 23:37:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: object=AGES7619_p1_101 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: patternid=326800193 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: scanid=326800193 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: topoafreqhz=1456214518.0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: topobfreqhz=1306214518.0 2013-Sep-25 23:37:18 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 23:37:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 23:37:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_101:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326800193:scanid=326800193:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456214518.0:topobfreqhz=1306214518.0:filetype=1 2013-Sep-25 23:37:18 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 23:37:18 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2013-Sep-25 23:37:18 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 23:37:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 23:37:18 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2013-Sep-25 23:37:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 23:37:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 23:37:19 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-25 23:37:19 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 23:37:19 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2013-Sep-25 23:37:19 LOG4 from_mock: From MOCK: starok 2013-Sep-25 23:37:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 23:37:19 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2013-Sep-25 23:37:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 23:37:19 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326800193 2013-Sep-25 23:37:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 23:37:19 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2013-Sep-25 23:37:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 23:37:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 23:37:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 23:37:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-25 23:37:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13040.00 2013-Sep-25 23:37:21 INFO2 got_mock_message: Mock spectrometer start file number is 02900 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.214518 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-25 23:37:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-25 23:37:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.214518 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-25 23:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.127 (still bad) 2013-Sep-25 23:37:23 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:37:24.00 2013-Sep-25 23:37:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380166644.00 Wed Sep 25 23:37:24 2013 2013-Sep-25 23:37:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 23:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.117 (still bad) 2013-Sep-25 23:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.147 (still bad) 2013-Sep-25 23:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.125 (still bad) 2013-Sep-25 23:37:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:37:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 23:37:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 0.925 0.972 0.966 2013-Sep-25 23:37:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 1.067 0.930 1.039 2013-Sep-25 23:37:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 1.018 0.991 0.068 2013-Sep-25 23:37:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.129 1.076 0.984 1.004 2013-Sep-25 23:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-25 23:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.150 (still bad) 2013-Sep-25 23:37:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2013-Sep-25 23:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.115 (still bad) 2013-Sep-25 23:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.124 (still bad) 2013-Sep-25 23:37:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.156 (still bad) 2013-Sep-25 23:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.209 (still bad) 2013-Sep-25 23:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.283 (still bad) 2013-Sep-25 23:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.338 (still bad) 2013-Sep-25 23:37:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.381 (still bad) 2013-Sep-25 23:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.383 (still bad) 2013-Sep-25 23:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.374 (still bad) 2013-Sep-25 23:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.304 (still bad) 2013-Sep-25 23:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.237 (still bad) 2013-Sep-25 23:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.161 (still bad) 2013-Sep-25 23:38:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.125 (still bad) 2013-Sep-25 23:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.177 (still bad) 2013-Sep-25 23:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.267 (still bad) 2013-Sep-25 23:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.317 (still bad) 2013-Sep-25 23:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.381 (still bad) 2013-Sep-25 23:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.398 (still bad) 2013-Sep-25 23:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.368 (still bad) 2013-Sep-25 23:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.313 (still bad) 2013-Sep-25 23:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.267 (still bad) 2013-Sep-25 23:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.175 (still bad) 2013-Sep-25 23:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:38:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:38:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.901 0.954 0.939 2013-Sep-25 23:38:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 1.068 0.978 1.088 2013-Sep-25 23:38:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 0.994 0.933 0.067 2013-Sep-25 23:38:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.118 1.066 0.970 0.991 2013-Sep-25 23:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.139 (still bad) 2013-Sep-25 23:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-25 23:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-25 23:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.133 (still bad) 2013-Sep-25 23:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:39:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-25 23:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-25 23:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.137 (still bad) 2013-Sep-25 23:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-25 23:39:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.072 < 0.75)! 2013-Sep-25 23:39:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 0.914 0.971 0.953 2013-Sep-25 23:39:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 1.090 0.953 1.060 2013-Sep-25 23:39:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.015 0.966 0.072 2013-Sep-25 23:39:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.133 1.077 0.984 1.002 2013-Sep-25 23:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.153 (still bad) 2013-Sep-25 23:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:39:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.149 (still bad) 2013-Sep-25 23:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:40:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-25 23:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.149 (still bad) 2013-Sep-25 23:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-25 23:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.154 (still bad) 2013-Sep-25 23:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:40:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.133 (still bad) 2013-Sep-25 23:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:40:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.073 < 0.75)! 2013-Sep-25 23:40:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.906 0.961 0.948 2013-Sep-25 23:40:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 1.071 0.936 1.037 2013-Sep-25 23:40:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 1.029 0.965 0.073 2013-Sep-25 23:40:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.153 1.101 1.001 1.024 2013-Sep-25 23:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:40:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.142 (still bad) 2013-Sep-25 23:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:40:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-25 23:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-25 23:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:41:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-25 23:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:41:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:41:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 23:41:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:41:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.901 0.955 0.938 2013-Sep-25 23:41:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.065 0.934 1.036 2013-Sep-25 23:41:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 0.994 0.936 0.067 2013-Sep-25 23:41:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.122 1.069 0.974 0.993 2013-Sep-25 23:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.149 (still bad) 2013-Sep-25 23:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.125 (still bad) 2013-Sep-25 23:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-25 23:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.150 (still bad) 2013-Sep-25 23:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.147 (still bad) 2013-Sep-25 23:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:42:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:42:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.061 0.908 0.967 0.952 2013-Sep-25 23:42:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.073 0.933 1.046 2013-Sep-25 23:42:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 0.995 0.937 0.067 2013-Sep-25 23:42:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.129 1.068 0.978 0.993 2013-Sep-25 23:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.146 (still bad) 2013-Sep-25 23:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.123 (still bad) 2013-Sep-25 23:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.122 (still bad) 2013-Sep-25 23:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.122 (still bad) 2013-Sep-25 23:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-25 23:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.120 (still bad) 2013-Sep-25 23:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.121 (still bad) 2013-Sep-25 23:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.122 (still bad) 2013-Sep-25 23:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:43:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:43:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 0.909 0.966 0.949 2013-Sep-25 23:43:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.066 0.932 1.038 2013-Sep-25 23:43:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 0.995 0.937 0.067 2013-Sep-25 23:43:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.128 1.066 0.977 0.991 2013-Sep-25 23:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.121 (still bad) 2013-Sep-25 23:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-25 23:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.123 (still bad) 2013-Sep-25 23:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-25 23:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-25 23:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.123 (still bad) 2013-Sep-25 23:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.123 (still bad) 2013-Sep-25 23:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.121 (still bad) 2013-Sep-25 23:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.132 (still bad) 2013-Sep-25 23:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.141 (still bad) 2013-Sep-25 23:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:44:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 23:44:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.918 0.975 0.963 2013-Sep-25 23:44:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.081 0.938 1.053 2013-Sep-25 23:44:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.007 0.950 0.068 2013-Sep-25 23:44:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.136 1.073 0.990 1.002 2013-Sep-25 23:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.149 (still bad) 2013-Sep-25 23:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-25 23:44:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.149 (still bad) 2013-Sep-25 23:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.147 (still bad) 2013-Sep-25 23:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.148 (still bad) 2013-Sep-25 23:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.133 (still bad) 2013-Sep-25 23:45:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.145 (still bad) 2013-Sep-25 23:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.127 (still bad) 2013-Sep-25 23:45:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:45:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 0.907 0.963 0.951 2013-Sep-25 23:45:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.070 0.935 1.041 2013-Sep-25 23:45:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 0.994 0.944 0.067 2013-Sep-25 23:45:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 1.067 0.977 0.991 2013-Sep-25 23:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.144 (still bad) 2013-Sep-25 23:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-25 23:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.118 (still bad) 2013-Sep-25 23:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 23:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.148 (still bad) 2013-Sep-25 23:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-25 23:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.160 (still bad) 2013-Sep-25 23:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.162 (still bad) 2013-Sep-25 23:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.156 (still bad) 2013-Sep-25 23:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.153 (still bad) 2013-Sep-25 23:46:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 23:46:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.918 0.974 0.959 2013-Sep-25 23:46:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.063 0.935 1.041 2013-Sep-25 23:46:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 1.024 0.949 0.069 2013-Sep-25 23:46:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.168 1.108 1.014 1.030 2013-Sep-25 23:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-25 23:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-25 23:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 23:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.138 (still bad) 2013-Sep-25 23:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-25 23:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.141 (still bad) 2013-Sep-25 23:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.133 (still bad) 2013-Sep-25 23:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:47:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.073 < 0.75)! 2013-Sep-25 23:47:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 0.919 0.976 0.963 2013-Sep-25 23:47:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.089 0.947 1.057 2013-Sep-25 23:47:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 1.015 0.963 0.073 2013-Sep-25 23:47:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.141 1.081 0.992 1.006 2013-Sep-25 23:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.146 (still bad) 2013-Sep-25 23:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.145 (still bad) 2013-Sep-25 23:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.132 (still bad) 2013-Sep-25 23:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.146 (still bad) 2013-Sep-25 23:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.145 (still bad) 2013-Sep-25 23:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:48:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.072 < 0.75)! 2013-Sep-25 23:48:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.926 0.979 0.964 2013-Sep-25 23:48:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.087 0.953 1.058 2013-Sep-25 23:48:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.028 0.957 0.072 2013-Sep-25 23:48:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.142 1.089 0.994 1.013 2013-Sep-25 23:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.148 (still bad) 2013-Sep-25 23:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.124 (still bad) 2013-Sep-25 23:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.147 (still bad) 2013-Sep-25 23:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-25 23:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.118 (still bad) 2013-Sep-25 23:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-25 23:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:49:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:49:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.911 0.963 0.950 2013-Sep-25 23:49:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.072 0.937 1.043 2013-Sep-25 23:49:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 0.994 0.939 0.067 2013-Sep-25 23:49:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 1.068 0.979 0.992 2013-Sep-25 23:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-25 23:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-25 23:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.135 (still bad) 2013-Sep-25 23:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:50:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 23:50:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.914 0.967 0.957 2013-Sep-25 23:50:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.076 0.935 1.042 2013-Sep-25 23:50:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.038 0.997 0.940 0.068 2013-Sep-25 23:50:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.131 1.069 0.982 0.993 2013-Sep-25 23:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.140 (still bad) 2013-Sep-25 23:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.137 (still bad) 2013-Sep-25 23:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.143 (still bad) 2013-Sep-25 23:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.148 (still bad) 2013-Sep-25 23:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.132 (still bad) 2013-Sep-25 23:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.141 (still bad) 2013-Sep-25 23:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:51:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:51:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.913 0.966 0.954 2013-Sep-25 23:51:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.065 0.933 1.037 2013-Sep-25 23:51:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.029 0.991 0.939 0.067 2013-Sep-25 23:51:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 1.062 0.974 0.986 2013-Sep-25 23:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.124 (still bad) 2013-Sep-25 23:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.142 (still bad) 2013-Sep-25 23:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-25 23:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.126 (still bad) 2013-Sep-25 23:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-25 23:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.142 (still bad) 2013-Sep-25 23:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.143 (still bad) 2013-Sep-25 23:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-25 23:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-25 23:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-25 23:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-25 23:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-25 23:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-25 23:52:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:52:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.905 0.961 0.945 2013-Sep-25 23:52:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.064 0.933 1.038 2013-Sep-25 23:52:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.032 0.992 0.936 0.067 2013-Sep-25 23:52:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 1.070 0.984 0.997 2013-Sep-25 23:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.141 (still bad) 2013-Sep-25 23:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.132 (still bad) 2013-Sep-25 23:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-25 23:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.139 (still bad) 2013-Sep-25 23:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-25 23:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.151 (still bad) 2013-Sep-25 23:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-25 23:53:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-25 23:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.148 (still bad) 2013-Sep-25 23:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:53:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-25 23:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-25 23:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.130 (still bad) 2013-Sep-25 23:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-25 23:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:53:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:53:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.058 0.908 0.964 0.952 2013-Sep-25 23:53:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.068 0.935 1.040 2013-Sep-25 23:53:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 0.991 0.936 0.067 2013-Sep-25 23:53:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.124 1.064 0.977 0.988 2013-Sep-25 23:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.154 (still bad) 2013-Sep-25 23:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.131 (still bad) 2013-Sep-25 23:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.150 (still bad) 2013-Sep-25 23:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-25 23:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 23:54:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-25 23:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.149 (still bad) 2013-Sep-25 23:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-25 23:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-25 23:54:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-25 23:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.153 (still bad) 2013-Sep-25 23:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-25 23:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.150 (still bad) 2013-Sep-25 23:54:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.142 (still bad) 2013-Sep-25 23:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-25 23:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.136 (still bad) 2013-Sep-25 23:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-25 23:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.145 (still bad) 2013-Sep-25 23:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-25 23:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.127 (still bad) 2013-Sep-25 23:55:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 23:55:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.929 0.993 0.981 2013-Sep-25 23:55:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.072 0.938 1.046 2013-Sep-25 23:55:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 0.995 0.941 0.068 2013-Sep-25 23:55:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.152 1.085 1.004 1.009 2013-Sep-25 23:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.130 (still bad) 2013-Sep-25 23:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.138 (still bad) 2013-Sep-25 23:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.125 (still bad) 2013-Sep-25 23:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-25 23:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.127 (still bad) 2013-Sep-25 23:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-25 23:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.141 (still bad) 2013-Sep-25 23:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.129 (still bad) 2013-Sep-25 23:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.141 (still bad) 2013-Sep-25 23:55:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.125 (still bad) 2013-Sep-25 23:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-25 23:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.131 (still bad) 2013-Sep-25 23:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-25 23:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-25 23:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-25 23:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-25 23:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.128 (still bad) 2013-Sep-25 23:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-25 23:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:56:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.074 < 0.75)! 2013-Sep-25 23:56:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 0.925 0.995 0.983 2013-Sep-25 23:56:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 1.086 0.951 1.061 2013-Sep-25 23:56:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.017 0.964 0.074 2013-Sep-25 23:56:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.145 1.082 0.998 1.005 2013-Sep-25 23:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.126 (still bad) 2013-Sep-25 23:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.142 (still bad) 2013-Sep-25 23:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.137 (still bad) 2013-Sep-25 23:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.126 (still bad) 2013-Sep-25 23:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.146 (still bad) 2013-Sep-25 23:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-25 23:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-25 23:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.140 (still bad) 2013-Sep-25 23:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.140 (still bad) 2013-Sep-25 23:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.126 (still bad) 2013-Sep-25 23:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.153 (still bad) 2013-Sep-25 23:56:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-25 23:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.140 (still bad) 2013-Sep-25 23:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.145 (still bad) 2013-Sep-25 23:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-25 23:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.153 (still bad) 2013-Sep-25 23:56:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:56:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.137 (still bad) 2013-Sep-25 23:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-25 23:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.144 (still bad) 2013-Sep-25 23:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.127 (still bad) 2013-Sep-25 23:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.151 (still bad) 2013-Sep-25 23:56:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:56:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.129 (still bad) 2013-Sep-25 23:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 23:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.142 (still bad) 2013-Sep-25 23:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.142 (still bad) 2013-Sep-25 23:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.126 (still bad) 2013-Sep-25 23:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.150 (still bad) 2013-Sep-25 23:57:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 23:57:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 23:57:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-25 23:57:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 0.928 0.966 0.955 2013-Sep-25 23:57:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.073 0.939 1.046 2013-Sep-25 23:57:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.001 0.940 0.067 2013-Sep-25 23:57:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 1.065 0.983 0.989 2013-Sep-25 23:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.138 (still bad) 2013-Sep-25 23:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.138 (still bad) 2013-Sep-25 23:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-25 23:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.148 (still bad) 2013-Sep-25 23:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-25 23:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-25 23:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 23:57:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 23:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:57:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 23:57:25 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 23:57:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 23:57:25 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2013-Sep-25 23:57:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 23:57:25 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Sep-25 23:57:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-25 23:57:25 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2013-Sep-25 23:57:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-25 23:57:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 23:57:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-25 23:57:25 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2013-Sep-25 23:57:25 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2013-Sep-25 23:57:25 COMMAND run_command_line: EXECUTING command 61: 'IF LSTSLEW(NGC7817_p1_060) < 000114 THEN' 2013-Sep-25 23:57:27 LOG3 is_if_valid: Current source data: up 216.3 2.5 UP - - 89 7.0 2013-Sep-25 23:57:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC7817_p1_060) < 000114 2013-Sep-25 23:57:27 INFO5 is_if_valid: Condition parsed as: -0.035318333333332674 < 0.020555555555555556 2013-Sep-25 23:57:27 COMMAND run_command_line: EXECUTING command 62: 'FIXEDDRIFT az=154.92 alfaangle=41.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_060 ra=235630.00 dec=201630.00' 2013-Sep-25 23:57:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-25 23:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.128 (still bad) 2013-Sep-25 23:57:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 23:57:28 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 154.92 41.3 hcorcal 5 tracking no off lcorcal first 1 NGC7817_p1_060 235630.00 201630.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:57:28 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-25 23:57:28 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2013-Sep-25 23:57:28 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_101' 2013-Sep-25 23:57:28 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-25 23:57:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC7817_p1_060} 2013-Sep-25 23:57:28 INFO3 fixed_driftmap: Sending telescope to Az = 154.92 and ZA = 2.21 2013-Sep-25 23:57:28 LOG3 track_source: Calling 'track_source NGC7817_p1_060 154.92 2.2124389824 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 23:57:28 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 23:57:28 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Sep-25 23:57:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_060} INFO {Slewing to source 'NGC7817_p1_060' ...} 2013-Sep-25 23:57:28 INFO1 track_source: Starting to track NGC7817_p1_060 2013-Sep-25 23:57:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_060" 2013-Sep-25 23:57:28 LOG3 vw_send: To DATATAKING: set ra 154.92 2013-Sep-25 23:57:28 LOG3 vw_send: To DATATAKING: set dec 2.2124389824 2013-Sep-25 23:57:28 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 23:57:28 LOG3 vw_send: To DATATAKING: pnt tr 154.92 2.2124389824 -CF 2013-Sep-25 23:57:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:57:28 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 23:57:28 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Sep-25 23:57:28 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 23:57:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:57:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 23:57:28 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Sep-25 23:57:28 START begin_task: Starting task 'rotate ALFA to +41.3 degrees' 2013-Sep-25 23:57:28 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Sep-25 23:57:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +41.3 degrees ...} 2013-Sep-25 23:57:28 INFO2 rotate_alfa: ALFA commanded to +41.3 degrees 2013-Sep-25 23:57:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 41.3 REPLY 2013-Sep-25 23:57:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 23:57:29 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 23:57:29 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_060" 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: set ra 154.92 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: vw% 154.92 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: set dec 2.2124389824 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: 2.2124389824 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: pnt tr 154.92 2.2124389824 -CF 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 23:57:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 23:57:54 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 23:57:54 INFO3 alfa_motor: ALFA rotator in-position +41.30 degrees 2013-Sep-25 23:57:54 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 23:57:54 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Sep-25 23:57:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 23:57:54 STOP finish_task: Finishing task 'rotate ALFA to +41.3 degrees' 2013-Sep-25 23:57:54 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Sep-25 23:57:54 INFO2 finish_task: DONE finished configuration: rotating ALFA to +41.3 degrees 2013-Sep-25 23:57:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 23:57:54 STOP end_task: Finishing task 'rotate ALFA to +41.3 degrees' with status 'OK' 2013-Sep-25 23:57:54 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Sep-25 23:57:54 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 23:57:54 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Sep-25 23:57:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 23:57:54 LOG3 waittrk: Start waittrk 5 2013-Sep-25 23:57:54 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 23:57:54 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2013-Sep-25 23:57:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 23:57:59 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2013-Sep-25 23:57:59 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 23:57:59 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2013-Sep-26 00:02:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-26 00:02:51 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2013-Sep-26 00:02:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:02:51 INFO2 waittrk: Now tracking NGC7817_p1_060 2013-Sep-26 00:02:51 LOG4 waittrk: Current telescope position: Az = 514.77 ZA = 2.21 2013-Sep-26 00:02:52 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-26 00:02:52 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Sep-26 00:02:52 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-26 00:02:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:02:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-26 00:02:52 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Sep-26 00:02:52 START begin_task: Starting task 'selecting calibration type' 2013-Sep-26 00:02:52 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Sep-26 00:02:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-26 00:02:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-26 00:02:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:02:52 START begin_task: Starting task 'waiting on setcal' 2013-Sep-26 00:02:52 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2013-Sep-26 00:02:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-26 00:02:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:02:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:02:53 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:02:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-26 00:02:53 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2013-Sep-26 00:02:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-26 00:02:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:02:54 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-26 00:02:54 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:02:54 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2013-Sep-26 00:02:54 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:02:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:02:54 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2013-Sep-26 00:02:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:02:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-26 00:02:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:02:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:02:54 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:02:54 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2013-Sep-26 00:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:02:54 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:02:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:02:54 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2013-Sep-26 00:02:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:02:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:02:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-26 00:02:54 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Sep-26 00:02:54 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-26 00:02:54 INFO2 astwait: Waiting for 230 seconds from 04:02:54 to 04:06:44 UTC ... 2013-Sep-26 00:02:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 230 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-26 00:02:54 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-26 00:02:54 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2013-Sep-26 00:06:44 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-26 00:06:44 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2013-Sep-26 00:06:44 INFO3 astwait: Finished waiting 2013-Sep-26 00:06:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:06:44 LOG5 dopset_later: Calling 'dopset_later 60.768213836451267' 2013-Sep-26 00:06:44 INFO3 dopset_later: Setting Doppler correction for 00:07:44 (60.8 seconds from now) 2013-Sep-26 00:06:44 LOG5 antvel: Calling 'antvel 154.920000 2.212439 F Heliocentric 60.768213836451267' 2013-Sep-26 00:06:44 LOG2 antvel: Transforming current Az = 154.92 ZA = 2.21 to apparent RA = 23:57:14.1 Dec = +20:21:17.9 2013-Sep-26 00:06:44 LOG2 antvel: Parameters to Doppler: Heliocentric 14864 2013 269 0.0 2013-Sep-26 00:06:44 INFO5 antvel: Computed antenna velocity: -1.76130 km/s 2013-Sep-26 00:06:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-1.7613029052 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-26 00:06:44 INFO4 dopset_gen: New sky frequencies: 1381.251544 1381.251544 1381.251544 1381.251544 1381.251544 1381.251544 1381.251544 1381.251544 1381.251544 2013-Sep-26 00:06:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.251544 sky0=1381.251544 sky1=1381.251544 sky2=1381.251544 sky3=1381.251544 sky4=1381.251544 sky5=1381.251544 sky6=1381.251544 sky7=1381.251544 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-26 00:06:44 LOG2 dopset_gen: Result from 'sky2syn': 1631.251544 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631251544.0} 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-26 00:06:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-26 00:06:44 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-26 00:06:44 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:55:34.2 Dec = +20:16:42.7 2013-Sep-26 00:06:44 LOG3 track_source: Calling 'track_source NGC7817_p1_060 235534.2 201642.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:06:44 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:06:44 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Sep-26 00:06:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_060} INFO {Slewing to source 'NGC7817_p1_060' ...} 2013-Sep-26 00:06:44 INFO1 track_source: Starting to track NGC7817_p1_060 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_060" 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: set ra 235534.2 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: set dec 201642.7 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: pnt tr 235534.2 201642.7 -CJ 2013-Sep-26 00:06:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:06:44 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:06:44 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Sep-26 00:06:44 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:06:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:06:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:06:45 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Sep-26 00:06:45 START begin_task: Starting task 'waiting on telescope' 2013-Sep-26 00:06:45 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2013-Sep-26 00:06:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-26 00:06:45 LOG3 waittrk: Start waittrk 5 2013-Sep-26 00:06:45 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-26 00:06:45 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631251544.0} 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_060" 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: set ra 235534.2 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% 235534.2 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: set dec 201642.7 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: 201642.7 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: pnt tr 235534.2 201642.7 -CJ 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:06:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:06:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-26 00:06:50 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2013-Sep-26 00:06:50 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-26 00:06:50 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2013-Sep-26 00:06:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-26 00:06:52 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2013-Sep-26 00:06:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:06:52 INFO2 waittrk: Now tracking NGC7817_p1_060 2013-Sep-26 00:06:52 LOG4 waittrk: Current telescope position: Az = 514.38 ZA = 2.22 2013-Sep-26 00:06:52 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-26 00:06:52 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2013-Sep-26 00:06:52 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-26 00:06:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:06:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-26 00:06:52 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2013-Sep-26 00:06:52 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-26 00:06:52 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2013-Sep-26 00:06:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-26 00:06:52 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-26 00:06:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-26 00:06:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-26 00:06:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:06:52 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-26 00:06:52 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2013-Sep-26 00:06:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-26 00:06:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:06:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:54 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:06:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-26 00:06:54 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2013-Sep-26 00:06:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-26 00:06:54 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-26 00:06:54 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2013-Sep-26 00:06:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-26 00:06:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:06:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:06:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:06:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:06:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-26 00:06:54 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2013-Sep-26 00:06:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-26 00:06:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:06:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 4 dB --- beam 1: 4 7 dB 2013-Sep-26 00:06:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-26 00:06:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-26 00:06:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 8 4 dB 2013-Sep-26 00:06:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-26 00:06:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-26 00:06:55 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2013-Sep-26 00:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.987 1.074 ALFA beam 1: 1.109 1.134 2013-Sep-26 00:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.894 1.025 ALFA beam 3: 0.934 1.014 2013-Sep-26 00:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.997 0.967 ALFA beam 5: 0.893 0.067 2013-Sep-26 00:06:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.001 0.978 ALFA beam 7: 1.084 0.909 2013-Sep-26 00:06:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-26 00:06:55 LOG5 finish_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2013-Sep-26 00:06:55 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-26 00:06:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:06:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-26 00:06:55 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2013-Sep-26 00:06:55 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-26 00:06:55 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Sep-26 00:06:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-26 00:06:55 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-26 00:06:55 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-26 00:06:55 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-26 00:06:55 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2013-Sep-26 00:06:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:06:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.074 1.109 1.134 2013-Sep-26 00:06:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 1.025 0.934 1.014 2013-Sep-26 00:06:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 0.967 0.893 0.067 2013-Sep-26 00:06:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.978 1.084 0.909 2013-Sep-26 00:07:01 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.3 26.6 B 31.4 31.7 mn:A 0.5 0.5 B 0.4 0.9 gn: 8 12 2013-Sep-26 00:07:01 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.7 30.3 B 27.6 29.2 mn:A 1.2 0.3 B 0.3 0.1 gn: 10 12 2013-Sep-26 00:07:01 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.4 27.4 B 34.0 28.5 mn:A 0.0 -0.4 B -0.1 0.9 gn: 10 9 2013-Sep-26 00:07:01 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.7 30.1 B 30.3 30.3 mn:A 1.4 1.0 B 0.8 1.3 gn: 12 8 2013-Sep-26 00:07:01 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 30.9 B 28.5 30.0 mn:A 0.3 -0.0 B 0.5 0.3 gn: 7 9 2013-Sep-26 00:07:01 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.0 29.2 B 31.8 29.5 mn:A 0.2 -0.6 B -0.1 0.3 gn: 7 10 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.7 30.3 B 33.1 29.6 mn:A 0.2 -0.3 B -0.3 -0.3 gn: 9 11 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.6 29.9 B 30.0 31.3 mn:A 0.1 0.2 B 0.1 0.6 gn: 9 11 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.6 30.7 B 29.3 29.4 mn:A -0.1 0.7 B 0.4 -0.3 gn: 5 6 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.6 29.5 B 31.0 29.9 mn:A 0.1 0.2 B -0.1 0.6 gn: 7 8 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.1 29.8 B 28.9 28.9 mn:A 0.9 -0.2 B 1.3 0.6 gn: 7 26 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.0 30.6 B 28.9 28.7 mn:A 1.1 -0.1 B -1.1 0.7 gn: 7 27 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.0 28.8 B 29.8 30.7 mn:A -0.1 1.7 B -0.3 -0.2 gn: 7 13 2013-Sep-26 00:07:02 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.2 27.2 B 29.1 29.3 mn:A 0.9 0.7 B -1.2 -0.8 gn: 8 14 2013-Sep-26 00:07:02 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-26 00:07:02 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2013-Sep-26 00:07:02 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-26 00:07:02 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-26 00:07:02 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Sep-26 00:07:02 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-26 00:07:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:07:02 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-26 00:07:02 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Sep-26 00:07:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-26 00:07:02 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-26 00:07:02 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2013-Sep-26 00:07:02 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-26 00:07:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:07:02 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-26 00:07:02 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2013-Sep-26 00:07:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:07:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:07:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:07:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:07:02 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-26 00:07:02 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-26 00:07:03 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-26 00:07:03 START begin_task: Starting task 'selecting calibration type' 2013-Sep-26 00:07:03 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-26 00:07:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-26 00:07:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:07:03 START begin_task: Starting task 'waiting on setcal' 2013-Sep-26 00:07:03 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-26 00:07:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-26 00:07:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:07:03 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:07:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-26 00:07:03 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-26 00:07:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:07:03 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-26 00:07:03 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:07:03 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:07:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:07:03 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:07:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-26 00:07:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:07:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:07:03 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:07:03 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2013-Sep-26 00:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:07:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20130926.a2048.0000.fits 2013-Sep-26 00:07:03 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:07:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:07:03 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2013-Sep-26 00:07:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:07:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:07:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-26 00:07:04 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2013-Sep-26 00:07:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-26 00:07:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-26 00:07:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-26 00:07:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-26 00:07:04 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2013-Sep-26 00:07:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130926.a2048.0000.fits} 2013-Sep-26 00:07:04 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-26 00:07:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-26 00:07:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-26 00:07:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-26 00:07:04 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2013-Sep-26 00:07:04 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-26 00:07:04 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:07:04 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2013-Sep-26 00:07:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-26 00:07:04 LOG5 log_alfabeam: Parameters: 23.926166666666671 20.278527777777779 0.009010 2013.7364952341118 41.299984 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 0 23.926166666666667 20.278527777777775 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 1 23.928446777059417 20.177448015858243 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 2 23.932676197885240 20.244873004137343 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 3 23.930694778031622 20.347242900206389 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 4 23.923994215915684 20.380229518643226 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 5 23.919448628409633 20.308299845368612 2013-Sep-26 00:07:04 LOG4 log_alfabeam: ALFABEAM 6 23.921917417984901 20.207999880765996 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: object=NGC7817_p1_060 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: patternid=326800193 2013-Sep-26 00:07:04 TEST take_mock_data: PSET configuration: scanid=326900001 2013-Sep-26 00:07:05 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:07:05 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:07:05 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:07:05 TEST take_mock_data: PSET configuration: topoafreqhz=1456251544.0 2013-Sep-26 00:07:05 TEST take_mock_data: PSET configuration: topobfreqhz=1306251544.0 2013-Sep-26 00:07:05 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:07:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:07:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_060:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326800193:scanid=326900001:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251544.0:topobfreqhz=1306251544.0:filetype=1 2013-Sep-26 00:07:05 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:07:05 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2013-Sep-26 00:07:05 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:07:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:07:05 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2013-Sep-26 00:07:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:07:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:07:05 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-26 00:07:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:07:05 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2013-Sep-26 00:07:05 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:07:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:07:05 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2013-Sep-26 00:07:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:07:05 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326900001 2013-Sep-26 00:07:06 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:07:06 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2013-Sep-26 00:07:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:07:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:07:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:07:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-26 00:07:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14827.00 2013-Sep-26 00:07:07 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:07:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-26 00:07:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:07:10.02 2013-Sep-26 00:07:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380168430.02 Thu Sep 26 00:07:10 2013 2013-Sep-26 00:07:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:07:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251544 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:07:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.454 (still bad) 2013-Sep-26 00:07:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:07:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:07:12 LOG3 WAPP=1-save_rfcalc: Channel 4: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=1-save_rfcalc: Channel 6: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:07:12 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:07:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:07:16 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:07:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:07:16 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2013-Sep-26 00:07:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:07:16 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2013-Sep-26 00:07:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-26 00:07:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-26 00:07:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-26 00:07:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-26 00:07:16 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2013-Sep-26 00:07:16 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-26 00:07:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-26 00:07:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-26 00:07:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-26 00:07:16 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2013-Sep-26 00:07:16 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-26 00:07:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:07:16 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2013-Sep-26 00:07:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-26 00:07:16 LOG5 log_alfabeam: Parameters: 23.926166666666671 20.278527777777779 0.012631 2013.7364956460569 41.299984 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 0 23.926166666666685 20.278527777777789 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 1 23.928592069495217 20.178119403765109 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 2 23.932724703825848 20.246766474459136 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 3 23.930592840544787 20.348536755270953 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 4 23.923846680122388 20.379581995160493 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 5 23.919407933018547 20.306387745091495 2013-Sep-26 00:07:16 LOG4 log_alfabeam: ALFABEAM 6 23.922018985000765 20.206804119093135 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: object=NGC7817_p1_060 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: patternid=326800193 2013-Sep-26 00:07:16 TEST take_mock_data: PSET configuration: scanid=326900002 2013-Sep-26 00:07:17 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:07:17 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:07:17 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:07:17 TEST take_mock_data: PSET configuration: topoafreqhz=1456251544.0 2013-Sep-26 00:07:17 TEST take_mock_data: PSET configuration: topobfreqhz=1306251544.0 2013-Sep-26 00:07:17 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:07:17 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:07:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_060:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326800193:scanid=326900002:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251544.0:topobfreqhz=1306251544.0:filetype=1 2013-Sep-26 00:07:17 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:07:17 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2013-Sep-26 00:07:17 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:07:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:07:17 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2013-Sep-26 00:07:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:07:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:07:17 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-26 00:07:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:07:17 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2013-Sep-26 00:07:17 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:07:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:07:17 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2013-Sep-26 00:07:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:07:17 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326900002 2013-Sep-26 00:07:18 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:07:18 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2013-Sep-26 00:07:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:07:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:07:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:07:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-26 00:07:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14839.00 2013-Sep-26 00:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.561 (still bad) 2013-Sep-26 00:07:19 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2013-Sep-26 00:07:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:07:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-26 00:07:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-26 00:07:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:07:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:07:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:07:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:07:22.01 2013-Sep-26 00:07:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380168442.01 Thu Sep 26 00:07:22 2013 2013-Sep-26 00:07:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251544 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:07:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:07:24 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-26 00:07:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:07:25 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.145 (still bad) 2013-Sep-26 00:07:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:07:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:07:28 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:07:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:07:28 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:07:28 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-26 00:07:28 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-26 00:07:28 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-26 00:07:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:07:28 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-26 00:07:28 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-26 00:07:28 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 154.92 and ZA = 2.21 2013-Sep-26 00:07:28 LOG3 track_source: Calling 'track_source NGC7817_p1_060 154.92 2.2124389824 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:07:28 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:07:28 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_060} INFO {Slewing to source 'NGC7817_p1_060' ...} 2013-Sep-26 00:07:28 INFO1 track_source: Starting to track NGC7817_p1_060 2013-Sep-26 00:07:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_060" 2013-Sep-26 00:07:28 LOG3 vw_send: To DATATAKING: set ra 154.92 2013-Sep-26 00:07:28 LOG3 vw_send: To DATATAKING: set dec 2.2124389824 2013-Sep-26 00:07:28 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:07:28 LOG3 vw_send: To DATATAKING: pnt tr 154.92 2.2124389824 -CF 2013-Sep-26 00:07:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:07:28 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:07:28 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:07:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:07:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:07:28 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Sep-26 00:07:28 LOG1 fixed_driftmap: Parameters: HA = +00:04:00.0 Start = 00:01:14.3 LST = 00:00:57.5 diff = 86416.8 secs 2013-Sep-26 00:07:29 INFO2 fixed_driftmap: Waiting 86414.8 seconds for RA 23:57:14 2013-Sep-26 00:07:29 INFO2 lstwait: Waiting for 14.8 secs from LST 00:00:58 to LST 00:01:12 ... 2013-Sep-26 00:07:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.772544253094541 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-26 00:07:29 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-26 00:07:29 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_060" 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: set ra 154.92 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: vw% 154.92 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: set dec 2.2124389824 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: 2.2124389824 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: pnt tr 154.92 2.2124389824 -CF 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:07:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.145 (still bad) 2013-Sep-26 00:07:43 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-26 00:07:43 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Sep-26 00:07:43 LOG4 lstwait: Finished waiting 1.23 seconds late 2013-Sep-26 00:07:44 INFO3 lstwait: Finished waiting 2013-Sep-26 00:07:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:07:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-26 00:07:44 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-26 00:07:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-26 00:07:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-26 00:07:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:07:44 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2013-Sep-26 00:07:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-26 00:07:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: object=NGC7817_p1_060 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: patternid=326900003 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: scanid=326900003 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: topoafreqhz=1456251544.0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: topobfreqhz=1306251544.0 2013-Sep-26 00:07:44 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:07:44 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:07:44 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_060:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326900003:scanid=326900003:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251544.0:topobfreqhz=1306251544.0:filetype=1 2013-Sep-26 00:07:44 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:07:44 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2013-Sep-26 00:07:44 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:07:44 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:07:44 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2013-Sep-26 00:07:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:07:44 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:07:44 LOG3 socket_wait: To MOCK: STAR600 2013-Sep-26 00:07:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:07:45 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Sep-26 00:07:45 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:07:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:07:45 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Sep-26 00:07:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:07:45 INFO2 take_data: Starting WAPP+Mock 600-second scan: 326900003 2013-Sep-26 00:07:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:07:45 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2013-Sep-26 00:07:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:07:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:07:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:07:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-26 00:07:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14866.00 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251544 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:07:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251544 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:07:47 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2013-Sep-26 00:07:47 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:07:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Sep-26 00:07:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:47 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:07:48 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2013-Sep-26 00:07:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:07:50.01 2013-Sep-26 00:07:50 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380168470.01 Thu Sep 26 00:07:50 2013 2013-Sep-26 00:07:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.159 (still bad) 2013-Sep-26 00:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:07:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:07:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.982 1.083 1.114 1.140 2013-Sep-26 00:07:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 1.031 0.919 1.015 2013-Sep-26 00:07:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.987 0.962 0.885 0.067 2013-Sep-26 00:07:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.975 1.088 0.907 2013-Sep-26 00:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-26 00:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.160 (still bad) 2013-Sep-26 00:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-26 00:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-26 00:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-26 00:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.133 (still bad) 2013-Sep-26 00:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-26 00:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.149 (still bad) 2013-Sep-26 00:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-26 00:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.148 (still bad) 2013-Sep-26 00:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-26 00:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-26 00:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-26 00:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-26 00:09:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-26 00:09:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.091 1.119 1.144 2013-Sep-26 00:09:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 1.037 0.925 1.022 2013-Sep-26 00:09:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 0.978 0.896 0.069 2013-Sep-26 00:09:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.983 1.095 0.914 2013-Sep-26 00:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.129 (still bad) 2013-Sep-26 00:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-26 00:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-26 00:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-26 00:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-26 00:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.146 (still bad) 2013-Sep-26 00:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.134 (still bad) 2013-Sep-26 00:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.147 (still bad) 2013-Sep-26 00:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-26 00:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-26 00:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.143 (still bad) 2013-Sep-26 00:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.144 (still bad) 2013-Sep-26 00:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.157 (still bad) 2013-Sep-26 00:10:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:10:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.974 1.074 1.106 1.132 2013-Sep-26 00:10:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.900 1.026 0.915 1.010 2013-Sep-26 00:10:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 0.967 0.887 0.067 2013-Sep-26 00:10:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.972 1.080 0.904 2013-Sep-26 00:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.149 (still bad) 2013-Sep-26 00:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.159 (still bad) 2013-Sep-26 00:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-26 00:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.149 (still bad) 2013-Sep-26 00:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.159 (still bad) 2013-Sep-26 00:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-26 00:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.160 (still bad) 2013-Sep-26 00:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.147 (still bad) 2013-Sep-26 00:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-26 00:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-26 00:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.159 (still bad) 2013-Sep-26 00:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-26 00:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-26 00:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-26 00:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.134 (still bad) 2013-Sep-26 00:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.160 (still bad) 2013-Sep-26 00:11:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:11:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.978 1.076 1.107 1.135 2013-Sep-26 00:11:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 1.036 0.926 1.023 2013-Sep-26 00:11:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 0.976 0.895 0.067 2013-Sep-26 00:11:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.971 1.083 0.903 2013-Sep-26 00:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-26 00:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-26 00:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-26 00:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-26 00:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-26 00:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.157 (still bad) 2013-Sep-26 00:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-26 00:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-26 00:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.149 (still bad) 2013-Sep-26 00:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.150 (still bad) 2013-Sep-26 00:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-26 00:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-26 00:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.145 (still bad) 2013-Sep-26 00:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.133 (still bad) 2013-Sep-26 00:12:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:12:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.085 1.117 1.138 2013-Sep-26 00:12:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.028 0.920 1.011 2013-Sep-26 00:12:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 0.971 0.893 0.067 2013-Sep-26 00:12:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.976 1.088 0.906 2013-Sep-26 00:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-26 00:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-26 00:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-26 00:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.130 (still bad) 2013-Sep-26 00:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.147 (still bad) 2013-Sep-26 00:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-26 00:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.152 (still bad) 2013-Sep-26 00:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-26 00:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.152 (still bad) 2013-Sep-26 00:13:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:13:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-26 00:13:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.987 1.091 1.121 1.144 2013-Sep-26 00:13:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 1.042 0.935 1.033 2013-Sep-26 00:13:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.002 0.988 0.899 0.068 2013-Sep-26 00:13:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.982 1.107 0.917 2013-Sep-26 00:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.162 (still bad) 2013-Sep-26 00:13:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-26 00:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.158 (still bad) 2013-Sep-26 00:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-26 00:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:13:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.164 (still bad) 2013-Sep-26 00:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-26 00:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.154 (still bad) 2013-Sep-26 00:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-26 00:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.164 (still bad) 2013-Sep-26 00:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-26 00:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.138 (still bad) 2013-Sep-26 00:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-26 00:13:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.139 (still bad) 2013-Sep-26 00:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-26 00:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-26 00:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-26 00:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-26 00:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.163 (still bad) 2013-Sep-26 00:14:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.145 (still bad) 2013-Sep-26 00:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.161 (still bad) 2013-Sep-26 00:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.157 (still bad) 2013-Sep-26 00:14:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-26 00:14:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.984 1.093 1.125 1.150 2013-Sep-26 00:14:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 1.039 0.926 1.021 2013-Sep-26 00:14:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 0.998 0.903 0.068 2013-Sep-26 00:14:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.986 1.112 0.921 2013-Sep-26 00:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.161 (still bad) 2013-Sep-26 00:14:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.143 (still bad) 2013-Sep-26 00:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-26 00:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-26 00:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.163 (still bad) 2013-Sep-26 00:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-26 00:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.145 (still bad) 2013-Sep-26 00:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.173 (still bad) 2013-Sep-26 00:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.146 (still bad) 2013-Sep-26 00:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-26 00:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.166 (still bad) 2013-Sep-26 00:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-26 00:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.145 (still bad) 2013-Sep-26 00:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.170 (still bad) 2013-Sep-26 00:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.140 (still bad) 2013-Sep-26 00:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.150 (still bad) 2013-Sep-26 00:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.160 (still bad) 2013-Sep-26 00:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.154 (still bad) 2013-Sep-26 00:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.143 (still bad) 2013-Sep-26 00:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Sep-26 00:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.169 (still bad) 2013-Sep-26 00:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.140 (still bad) 2013-Sep-26 00:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.152 (still bad) 2013-Sep-26 00:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.168 (still bad) 2013-Sep-26 00:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.141 (still bad) 2013-Sep-26 00:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.151 (still bad) 2013-Sep-26 00:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.163 (still bad) 2013-Sep-26 00:15:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:15:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 1.099 1.128 1.153 2013-Sep-26 00:15:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.042 0.929 1.026 2013-Sep-26 00:15:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 0.976 0.896 0.067 2013-Sep-26 00:15:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.983 1.103 0.915 2013-Sep-26 00:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.142 (still bad) 2013-Sep-26 00:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.166 (still bad) 2013-Sep-26 00:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.148 (still bad) 2013-Sep-26 00:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.159 (still bad) 2013-Sep-26 00:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-26 00:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.164 (still bad) 2013-Sep-26 00:15:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-26 00:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-26 00:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.164 (still bad) 2013-Sep-26 00:15:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-26 00:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.157 (still bad) 2013-Sep-26 00:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-26 00:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.161 (still bad) 2013-Sep-26 00:15:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.145 (still bad) 2013-Sep-26 00:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.156 (still bad) 2013-Sep-26 00:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-26 00:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.164 (still bad) 2013-Sep-26 00:16:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-26 00:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.156 (still bad) 2013-Sep-26 00:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-26 00:16:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:16:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.985 1.092 1.113 1.140 2013-Sep-26 00:16:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 1.041 0.922 1.018 2013-Sep-26 00:16:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 0.972 0.938 0.067 2013-Sep-26 00:16:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.974 1.087 0.906 2013-Sep-26 00:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.164 (still bad) 2013-Sep-26 00:16:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.145 (still bad) 2013-Sep-26 00:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.153 (still bad) 2013-Sep-26 00:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:16:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.164 (still bad) 2013-Sep-26 00:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.144 (still bad) 2013-Sep-26 00:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.154 (still bad) 2013-Sep-26 00:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.134 (still bad) 2013-Sep-26 00:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-26 00:16:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.138 (still bad) 2013-Sep-26 00:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-26 00:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-26 00:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.156 (still bad) 2013-Sep-26 00:16:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.139 (still bad) 2013-Sep-26 00:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-26 00:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.146 (still bad) 2013-Sep-26 00:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.142 (still bad) 2013-Sep-26 00:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.137 (still bad) 2013-Sep-26 00:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.160 (still bad) 2013-Sep-26 00:17:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.142 (still bad) 2013-Sep-26 00:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.152 (still bad) 2013-Sep-26 00:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-26 00:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.141 (still bad) 2013-Sep-26 00:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-26 00:17:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:17:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.073 < 0.75)! 2013-Sep-26 00:17:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.983 1.082 1.111 1.139 2013-Sep-26 00:17:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.034 0.923 1.019 2013-Sep-26 00:17:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 0.994 0.908 0.073 2013-Sep-26 00:17:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.974 1.087 0.906 2013-Sep-26 00:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.149 (still bad) 2013-Sep-26 00:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.148 (still bad) 2013-Sep-26 00:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.140 (still bad) 2013-Sep-26 00:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.155 (still bad) 2013-Sep-26 00:17:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.138 (still bad) 2013-Sep-26 00:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.147 (still bad) 2013-Sep-26 00:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-26 00:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.140 (still bad) 2013-Sep-26 00:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.136 (still bad) 2013-Sep-26 00:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.159 (still bad) 2013-Sep-26 00:17:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.153 (still bad) 2013-Sep-26 00:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.151 (still bad) 2013-Sep-26 00:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.143 (still bad) 2013-Sep-26 00:17:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:17:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:17:51 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:17:51 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:17:51 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2013-Sep-26 00:17:51 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:17:51 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2013-Sep-26 00:17:51 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-26 00:17:51 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2013-Sep-26 00:17:51 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-26 00:17:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-26 00:17:51 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-26 00:17:51 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2013-Sep-26 00:17:51 COMMAND run_command_line: EXECUTING command 65: 'ENDIF' 2013-Sep-26 00:17:51 COMMAND run_command_line: EXECUTING command 68: 'IF LSTSLEW(NGC7817_p1_062) < 001414 THEN' 2013-Sep-26 00:17:53 LOG3 is_if_valid: Current source data: up 480.8 3.9 UP - - 69 1.4 2013-Sep-26 00:17:53 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC7817_p1_062) < 001414 2013-Sep-26 00:17:53 INFO5 is_if_valid: Condition parsed as: 0.21283633333333335 < 0.23722222222222222 2013-Sep-26 00:17:53 COMMAND run_command_line: EXECUTING command 69: 'FIXEDDRIFT az=116.64 alfaangle=80.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_062 ra=235630.00 dec=201330.00' 2013-Sep-26 00:17:53 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-26 00:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.139 (still bad) 2013-Sep-26 00:17:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-26 00:17:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 116.64 80.3 hcorcal 5 tracking no off lcorcal first 1 NGC7817_p1_062 235630.00 201330.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:17:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-26 00:17:54 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2013-Sep-26 00:17:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC7817_p1_060' 2013-Sep-26 00:17:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-26 00:17:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC7817_p1_062} 2013-Sep-26 00:17:54 INFO3 fixed_driftmap: Sending telescope to Az = 116.64 and ZA = 4.46 2013-Sep-26 00:17:54 LOG3 track_source: Calling 'track_source NGC7817_p1_062 116.64 4.4589750403 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:17:54 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:17:54 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Sep-26 00:17:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_062} INFO {Slewing to source 'NGC7817_p1_062' ...} 2013-Sep-26 00:17:54 INFO1 track_source: Starting to track NGC7817_p1_062 2013-Sep-26 00:17:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_062" 2013-Sep-26 00:17:54 LOG3 vw_send: To DATATAKING: set ra 116.64 2013-Sep-26 00:17:54 LOG3 vw_send: To DATATAKING: set dec 4.4589750403 2013-Sep-26 00:17:54 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:17:54 LOG3 vw_send: To DATATAKING: pnt tr 116.64 4.4589750403 -CF 2013-Sep-26 00:17:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:17:54 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:17:54 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Sep-26 00:17:54 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:17:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:17:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:17:54 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Sep-26 00:17:54 START begin_task: Starting task 'rotate ALFA to +80.3 degrees' 2013-Sep-26 00:17:54 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Sep-26 00:17:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +80.3 degrees ...} 2013-Sep-26 00:17:54 INFO2 rotate_alfa: ALFA commanded to +80.3 degrees 2013-Sep-26 00:17:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 80.3 REPLY 2013-Sep-26 00:17:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-26 00:17:55 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-26 00:17:55 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_062" 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: set ra 116.64 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: vw% 116.64 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: set dec 4.4589750403 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: 4.4589750403 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: pnt tr 116.64 4.4589750403 -CF 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:17:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:18:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-26 00:18:17 INFO3 alfa_motor: ALFA rotator in-position +80.30 degrees 2013-Sep-26 00:18:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-26 00:18:17 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2013-Sep-26 00:18:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:18:17 STOP finish_task: Finishing task 'rotate ALFA to +80.3 degrees' 2013-Sep-26 00:18:17 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Sep-26 00:18:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to +80.3 degrees 2013-Sep-26 00:18:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:18:17 STOP end_task: Finishing task 'rotate ALFA to +80.3 degrees' with status 'OK' 2013-Sep-26 00:18:17 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Sep-26 00:18:17 START begin_task: Starting task 'waiting on telescope' 2013-Sep-26 00:18:17 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2013-Sep-26 00:18:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-26 00:18:17 LOG3 waittrk: Start waittrk 5 2013-Sep-26 00:18:17 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-26 00:18:17 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2013-Sep-26 00:18:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-26 00:18:22 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2013-Sep-26 00:18:23 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-26 00:18:23 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2013-Sep-26 00:19:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-26 00:19:38 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2013-Sep-26 00:19:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:19:38 INFO2 waittrk: Now tracking NGC7817_p1_062 2013-Sep-26 00:19:38 LOG4 waittrk: Current telescope position: Az = 476.48 ZA = 4.46 2013-Sep-26 00:19:38 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-26 00:19:39 LOG5 finish_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-26 00:19:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:19:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-26 00:19:39 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 START begin_task: Starting task 'selecting calibration type' 2013-Sep-26 00:19:39 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-26 00:19:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-26 00:19:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:19:39 START begin_task: Starting task 'waiting on setcal' 2013-Sep-26 00:19:39 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-26 00:19:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:39 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:19:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-26 00:19:39 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-26 00:19:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:19:39 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-26 00:19:39 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:19:39 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:19:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:19:39 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:19:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-26 00:19:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:19:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:19:39 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:19:39 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2013-Sep-26 00:19:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:39 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:19:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:19:39 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2013-Sep-26 00:19:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:19:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:19:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-26 00:19:40 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Sep-26 00:19:40 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-26 00:19:40 INFO2 astwait: Waiting for 1 seconds from 04:19:40 to 04:19:41 UTC ... 2013-Sep-26 00:19:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-26 00:19:40 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-26 00:19:40 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2013-Sep-26 00:19:41 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-26 00:19:41 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2013-Sep-26 00:19:41 INFO3 astwait: Finished waiting 2013-Sep-26 00:19:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:19:41 LOG5 dopset_later: Calling 'dopset_later 61.453216943238658' 2013-Sep-26 00:19:41 INFO3 dopset_later: Setting Doppler correction for 00:20:41 (61.5 seconds from now) 2013-Sep-26 00:19:41 LOG5 antvel: Calling 'antvel 116.640000 4.458975 F Heliocentric 61.453216943238658' 2013-Sep-26 00:19:41 LOG2 antvel: Transforming current Az = 116.64 ZA = 4.46 to apparent RA = 23:57:14.1 Dec = +20:18:17.9 2013-Sep-26 00:19:41 LOG2 antvel: Parameters to Doppler: Heliocentric 15641 2013 269 0.0 2013-Sep-26 00:19:41 INFO5 antvel: Computed antenna velocity: -1.72314 km/s 2013-Sep-26 00:19:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-1.7231400469 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-26 00:19:41 INFO4 dopset_gen: New sky frequencies: 1381.251368 1381.251368 1381.251368 1381.251368 1381.251368 1381.251368 1381.251368 1381.251368 1381.251368 2013-Sep-26 00:19:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.251368 sky0=1381.251368 sky1=1381.251368 sky2=1381.251368 sky3=1381.251368 sky4=1381.251368 sky5=1381.251368 sky6=1381.251368 sky7=1381.251368 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-26 00:19:41 LOG2 dopset_gen: Result from 'sky2syn': 1631.251368 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631251368.0} 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-26 00:19:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-26 00:19:41 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-26 00:19:41 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:55:33.6 Dec = +20:13:42.7 2013-Sep-26 00:19:41 LOG3 track_source: Calling 'track_source NGC7817_p1_062 235533.6 201342.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:19:41 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:19:41 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Sep-26 00:19:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_062} INFO {Slewing to source 'NGC7817_p1_062' ...} 2013-Sep-26 00:19:41 INFO1 track_source: Starting to track NGC7817_p1_062 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_062" 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: set ra 235533.6 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: set dec 201342.7 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: pnt tr 235533.6 201342.7 -CJ 2013-Sep-26 00:19:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:19:41 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:19:41 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Sep-26 00:19:41 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:19:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:19:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:19:42 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Sep-26 00:19:42 START begin_task: Starting task 'waiting on telescope' 2013-Sep-26 00:19:42 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Sep-26 00:19:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-26 00:19:42 LOG3 waittrk: Start waittrk 5 2013-Sep-26 00:19:42 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-26 00:19:42 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631251368.0} 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_062" 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: set ra 235533.6 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% 235533.6 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: set dec 201342.7 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: 201342.7 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: pnt tr 235533.6 201342.7 -CJ 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:19:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:19:47 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-26 00:19:47 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2013-Sep-26 00:19:47 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-26 00:19:47 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Sep-26 00:19:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-26 00:19:53 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Sep-26 00:19:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:19:53 INFO2 waittrk: Now tracking NGC7817_p1_062 2013-Sep-26 00:19:53 LOG4 waittrk: Current telescope position: Az = 476.34 ZA = 4.49 2013-Sep-26 00:19:53 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-26 00:19:53 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Sep-26 00:19:53 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-26 00:19:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:19:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-26 00:19:53 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Sep-26 00:19:53 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-26 00:19:53 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Sep-26 00:19:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-26 00:19:53 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-26 00:19:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-26 00:19:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-26 00:19:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:19:53 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-26 00:19:54 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2013-Sep-26 00:19:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-26 00:19:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:56 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:19:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-26 00:19:56 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2013-Sep-26 00:19:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-26 00:19:56 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-26 00:19:56 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2013-Sep-26 00:19:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-26 00:19:57 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:19:57 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:19:57 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:19:57 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:19:57 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-26 00:19:57 LOG5 begin_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2013-Sep-26 00:19:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-26 00:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:19:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 4 dB --- beam 1: 4 8 dB 2013-Sep-26 00:19:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-26 00:19:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-26 00:19:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 8 4 dB 2013-Sep-26 00:19:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-26 00:19:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-26 00:19:57 LOG5 end_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2013-Sep-26 00:19:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.979 1.065 ALFA beam 1: 1.105 0.859 2013-Sep-26 00:19:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.943 1.034 ALFA beam 3: 0.925 0.985 2013-Sep-26 00:19:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.993 0.940 ALFA beam 5: 0.893 0.066 2013-Sep-26 00:19:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.006 0.986 ALFA beam 7: 1.088 0.917 2013-Sep-26 00:19:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-26 00:19:57 LOG5 finish_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2013-Sep-26 00:19:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-26 00:19:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:19:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-26 00:19:57 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2013-Sep-26 00:19:57 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-26 00:19:57 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2013-Sep-26 00:19:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-26 00:19:58 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-26 00:19:58 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-26 00:19:58 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-26 00:19:58 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2013-Sep-26 00:19:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:19:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.979 1.065 1.105 0.859 2013-Sep-26 00:19:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 1.034 0.925 0.985 2013-Sep-26 00:19:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.993 0.940 0.893 0.066 2013-Sep-26 00:19:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.986 1.088 0.917 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.3 26.6 B 31.3 31.5 mn:A 0.5 0.5 B 0.4 0.8 gn: 8 12 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.7 30.3 B 30.9 32.7 mn:A 1.2 0.4 B 0.3 0.1 gn: 10 13 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.5 27.6 B 34.1 28.6 mn:A -0.0 -0.4 B -0.1 0.9 gn: 10 9 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.2 29.7 B 29.9 29.9 mn:A 1.4 0.9 B 0.8 1.2 gn: 12 8 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.0 28.1 B 28.7 30.1 mn:A 0.3 -0.1 B 0.4 0.3 gn: 6 9 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.9 30.1 B 31.8 29.5 mn:A 0.1 -0.5 B -0.1 0.5 gn: 7 10 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.0 30.6 B 32.7 29.2 mn:A 0.2 -0.3 B -0.2 -0.2 gn: 9 11 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.4 29.8 B 29.5 30.8 mn:A -0.0 0.1 B 0.0 0.5 gn: 9 11 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b4s0g0 rms:A 31.6 30.8 B 29.0 29.1 mn:A -0.1 0.7 B 0.4 -0.3 gn: 5 6 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.5 B 30.4 29.3 mn:A -0.0 0.1 B -0.1 0.6 gn: 7 8 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.1 29.9 B 28.9 28.9 mn:A 0.9 -0.1 B 1.4 0.5 gn: 7 26 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.1 30.8 B 28.9 28.7 mn:A 1.0 -0.0 B -1.1 0.8 gn: 7 27 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.0 28.8 B 30.0 30.9 mn:A -0.1 1.7 B -0.2 -0.3 gn: 7 13 2013-Sep-26 00:20:04 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.5 27.4 B 29.1 29.3 mn:A 1.0 0.7 B -1.2 -0.8 gn: 8 14 2013-Sep-26 00:20:04 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-26 00:20:04 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2013-Sep-26 00:20:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-26 00:20:04 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-26 00:20:04 LOG5 finish_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2013-Sep-26 00:20:04 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-26 00:20:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:20:04 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-26 00:20:04 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-26 00:20:05 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-26 00:20:05 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-26 00:20:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:20:05 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-26 00:20:05 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:20:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:20:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:20:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:20:05 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-26 00:20:05 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-26 00:20:05 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-26 00:20:05 START begin_task: Starting task 'selecting calibration type' 2013-Sep-26 00:20:05 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-26 00:20:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-26 00:20:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:20:05 START begin_task: Starting task 'waiting on setcal' 2013-Sep-26 00:20:05 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-26 00:20:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-26 00:20:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:20:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:20:05 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:20:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-26 00:20:05 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2013-Sep-26 00:20:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-26 00:20:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:20:05 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-26 00:20:06 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:20:06 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:20:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:20:06 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:20:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-26 00:20:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:20:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:20:06 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:20:06 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:20:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20130926.a2048.0001.fits 2013-Sep-26 00:20:06 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:20:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:20:06 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:20:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:20:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-26 00:20:06 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-26 00:20:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-26 00:20:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-26 00:20:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-26 00:20:06 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130926.a2048.0001.fits} 2013-Sep-26 00:20:06 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-26 00:20:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-26 00:20:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-26 00:20:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-26 00:20:06 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-26 00:20:06 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:20:06 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2013-Sep-26 00:20:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-26 00:20:07 LOG5 log_alfabeam: Parameters: 23.926000000000002 20.228527777777778 0.227106 2013.7365200458844 80.299896 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 0 23.926000000000013 20.228527777777778 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 1 23.928370141125974 20.136872121288565 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 2 23.933232212376765 20.198144887133907 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 3 23.930969824109500 20.289910422750232 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 4 23.923759990398828 20.321635765353076 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 5 23.918747177291429 20.258175056722983 2013-Sep-26 00:20:07 LOG4 log_alfabeam: ALFABEAM 6 23.921096945847403 20.165170181903640 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: object=NGC7817_p1_062 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: patternid=326900003 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: scanid=326900004 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: topoafreqhz=1456251368.0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: topobfreqhz=1306251368.0 2013-Sep-26 00:20:07 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:20:07 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:20:07 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_062:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326900003:scanid=326900004:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251368.0:topobfreqhz=1306251368.0:filetype=1 2013-Sep-26 00:20:07 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:20:07 LOG5 begin_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2013-Sep-26 00:20:07 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:20:07 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:20:07 LOG5 end_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2013-Sep-26 00:20:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:20:07 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:20:07 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-26 00:20:07 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:20:07 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2013-Sep-26 00:20:07 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:20:07 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:20:08 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2013-Sep-26 00:20:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:20:08 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326900004 2013-Sep-26 00:20:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:20:08 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2013-Sep-26 00:20:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:20:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:20:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:20:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-26 00:20:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15609.00 2013-Sep-26 00:20:10 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:20:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-26 00:20:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:13 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:20:13.01 2013-Sep-26 00:20:13 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380169213.01 Thu Sep 26 00:20:13 2013 2013-Sep-26 00:20:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251368 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:20:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:20:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.558 (still bad) 2013-Sep-26 00:20:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:20:19 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:20:19 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:20:19 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2013-Sep-26 00:20:19 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:20:19 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2013-Sep-26 00:20:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-26 00:20:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-26 00:20:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-26 00:20:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-26 00:20:19 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2013-Sep-26 00:20:19 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-26 00:20:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-26 00:20:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-26 00:20:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-26 00:20:19 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2013-Sep-26 00:20:19 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-26 00:20:19 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:20:19 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2013-Sep-26 00:20:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-26 00:20:19 LOG5 log_alfabeam: Parameters: 23.926000000000002 20.228527777777778 0.230727 2013.7365204578296 80.299896 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 0 23.925999999999998 20.228527777777789 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 1 23.928401787530110 20.137031433184013 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 2 23.933242948512440 20.198654420417089 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 3 23.930947780422898 20.290267095722012 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 4 23.923726450321681 20.321470634478132 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 5 23.918736899077384 20.257670891395264 2013-Sep-26 00:20:19 LOG4 log_alfabeam: ALFABEAM 6 23.921119034702837 20.164837882892037 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: object=NGC7817_p1_062 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: patternid=326900003 2013-Sep-26 00:20:19 TEST take_mock_data: PSET configuration: scanid=326900005 2013-Sep-26 00:20:20 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:20:20 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:20:20 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:20:20 TEST take_mock_data: PSET configuration: topoafreqhz=1456251368.0 2013-Sep-26 00:20:20 TEST take_mock_data: PSET configuration: topobfreqhz=1306251368.0 2013-Sep-26 00:20:20 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:20:20 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:20:20 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_062:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326900003:scanid=326900005:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251368.0:topobfreqhz=1306251368.0:filetype=1 2013-Sep-26 00:20:20 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:20:20 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2013-Sep-26 00:20:20 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:20:20 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:20:20 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2013-Sep-26 00:20:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:20:20 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:20:20 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-26 00:20:20 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:20:20 LOG5 begin_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2013-Sep-26 00:20:20 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:20:20 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:20:20 LOG5 end_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2013-Sep-26 00:20:20 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:20:20 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326900005 2013-Sep-26 00:20:21 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:20:21 LOG5 begin_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2013-Sep-26 00:20:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:20:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:20:21 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.558 (still bad) 2013-Sep-26 00:20:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-26 00:20:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15622.00 2013-Sep-26 00:20:22 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:20:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-26 00:20:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:20:25 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:20:25.02 2013-Sep-26 00:20:25 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380169225.02 Thu Sep 26 00:20:25 2013 2013-Sep-26 00:20:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251368 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:20:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.402 (still bad) 2013-Sep-26 00:20:27 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-26 00:20:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:20:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:20:31 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:20:31 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:20:31 LOG5 end_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2013-Sep-26 00:20:31 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:20:31 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2013-Sep-26 00:20:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-26 00:20:31 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-26 00:20:31 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Sep-26 00:20:31 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-26 00:20:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:20:31 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-26 00:20:31 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Sep-26 00:20:31 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-26 00:20:31 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 116.64 and ZA = 4.46 2013-Sep-26 00:20:31 LOG3 track_source: Calling 'track_source NGC7817_p1_062 116.64 4.4589750403 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:20:31 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:20:31 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Sep-26 00:20:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_062} INFO {Slewing to source 'NGC7817_p1_062' ...} 2013-Sep-26 00:20:31 INFO1 track_source: Starting to track NGC7817_p1_062 2013-Sep-26 00:20:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_062" 2013-Sep-26 00:20:31 LOG3 vw_send: To DATATAKING: set ra 116.64 2013-Sep-26 00:20:31 LOG3 vw_send: To DATATAKING: set dec 4.4589750403 2013-Sep-26 00:20:31 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:20:31 LOG3 vw_send: To DATATAKING: pnt tr 116.64 4.4589750403 -CF 2013-Sep-26 00:20:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:20:31 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:20:31 LOG5 finish_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Sep-26 00:20:31 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:20:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:20:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:20:31 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Sep-26 00:20:32 LOG1 fixed_driftmap: Parameters: HA = +00:16:59.8 Start = 00:14:14.1 LST = 00:14:02.6 diff = 86411.5 secs 2013-Sep-26 00:20:32 INFO2 fixed_driftmap: Waiting 86409.5 seconds for RA 23:57:14 2013-Sep-26 00:20:32 INFO2 lstwait: Waiting for 9.5 secs from LST 00:14:03 to LST 00:14:12 ... 2013-Sep-26 00:20:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.4583723541090023 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-26 00:20:32 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-26 00:20:32 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_062" 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: set ra 116.64 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: vw% 116.64 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: set dec 4.4589750403 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: 4.4589750403 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: pnt tr 116.64 4.4589750403 -CF 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:20:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.117 (still bad) 2013-Sep-26 00:20:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-26 00:20:41 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2013-Sep-26 00:20:41 LOG4 lstwait: Finished waiting 1.55 seconds late 2013-Sep-26 00:20:41 INFO3 lstwait: Finished waiting 2013-Sep-26 00:20:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:20:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-26 00:20:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-26 00:20:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-26 00:20:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-26 00:20:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:20:41 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Sep-26 00:20:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-26 00:20:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: object=NGC7817_p1_062 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: patternid=326900006 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: scanid=326900006 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: topoafreqhz=1456251368.0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: topobfreqhz=1306251368.0 2013-Sep-26 00:20:42 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:20:42 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:20:42 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_062:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326900006:scanid=326900006:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251368.0:topobfreqhz=1306251368.0:filetype=1 2013-Sep-26 00:20:42 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:20:42 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2013-Sep-26 00:20:42 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:20:42 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:20:42 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2013-Sep-26 00:20:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:20:42 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:20:42 LOG3 socket_wait: To MOCK: STAR600 2013-Sep-26 00:20:42 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:20:42 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2013-Sep-26 00:20:42 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:20:42 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:20:42 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2013-Sep-26 00:20:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:20:42 INFO2 take_data: Starting WAPP+Mock 600-second scan: 326900006 2013-Sep-26 00:20:43 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:20:43 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2013-Sep-26 00:20:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:20:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:20:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:20:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-26 00:20:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15644.00 2013-Sep-26 00:20:45 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251368 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:20:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:20:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251368 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.113 (still bad) 2013-Sep-26 00:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:20:48 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:20:48.02 2013-Sep-26 00:20:48 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380169248.02 Thu Sep 26 00:20:48 2013 2013-Sep-26 00:20:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-26 00:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.123 (still bad) 2013-Sep-26 00:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:21:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.071 < 0.75)! 2013-Sep-26 00:21:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 1.088 1.128 0.894 2013-Sep-26 00:21:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 1.057 0.938 1.002 2013-Sep-26 00:21:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.003 0.948 0.913 0.071 2013-Sep-26 00:21:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 1.007 1.103 0.938 2013-Sep-26 00:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-26 00:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-26 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-26 00:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-26 00:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.121 (still bad) 2013-Sep-26 00:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.106 (still bad) 2013-Sep-26 00:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.107 (still bad) 2013-Sep-26 00:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.113 (still bad) 2013-Sep-26 00:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.121 (still bad) 2013-Sep-26 00:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.106 (still bad) 2013-Sep-26 00:22:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:22:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.989 1.068 1.111 0.880 2013-Sep-26 00:22:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.043 0.922 0.985 2013-Sep-26 00:22:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 0.935 0.894 0.066 2013-Sep-26 00:22:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.991 1.088 0.923 2013-Sep-26 00:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.120 (still bad) 2013-Sep-26 00:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.104 (still bad) 2013-Sep-26 00:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.102 (still bad) 2013-Sep-26 00:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.120 (still bad) 2013-Sep-26 00:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.105 (still bad) 2013-Sep-26 00:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.101 (still bad) 2013-Sep-26 00:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-26 00:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.120 (still bad) 2013-Sep-26 00:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-26 00:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:23:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:23:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 1.070 1.114 0.879 2013-Sep-26 00:23:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.040 0.927 0.991 2013-Sep-26 00:23:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 0.934 0.897 0.066 2013-Sep-26 00:23:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.991 1.085 0.921 2013-Sep-26 00:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-26 00:23:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.123 (still bad) 2013-Sep-26 00:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.129 (still bad) 2013-Sep-26 00:23:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.113 (still bad) 2013-Sep-26 00:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.129 (still bad) 2013-Sep-26 00:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.118 (still bad) 2013-Sep-26 00:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.133 (still bad) 2013-Sep-26 00:23:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.115 (still bad) 2013-Sep-26 00:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-26 00:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-26 00:23:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.124 (still bad) 2013-Sep-26 00:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-26 00:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:24:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:24:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.990 1.073 1.111 0.877 2013-Sep-26 00:24:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 1.036 0.926 0.987 2013-Sep-26 00:24:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.991 0.933 0.896 0.066 2013-Sep-26 00:24:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.993 1.087 0.922 2013-Sep-26 00:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-26 00:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:24:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.129 (still bad) 2013-Sep-26 00:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.115 (still bad) 2013-Sep-26 00:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.129 (still bad) 2013-Sep-26 00:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-26 00:24:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.131 (still bad) 2013-Sep-26 00:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.127 (still bad) 2013-Sep-26 00:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-26 00:24:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.131 (still bad) 2013-Sep-26 00:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.125 (still bad) 2013-Sep-26 00:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.113 (still bad) 2013-Sep-26 00:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-26 00:24:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.130 (still bad) 2013-Sep-26 00:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.116 (still bad) 2013-Sep-26 00:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-26 00:25:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-26 00:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:25:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:25:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 1.072 1.110 0.878 2013-Sep-26 00:25:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 1.044 0.933 0.998 2013-Sep-26 00:25:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.990 0.933 0.895 0.066 2013-Sep-26 00:25:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.992 1.084 0.921 2013-Sep-26 00:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-26 00:25:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-26 00:25:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.120 (still bad) 2013-Sep-26 00:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.115 (still bad) 2013-Sep-26 00:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-26 00:25:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.118 (still bad) 2013-Sep-26 00:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.115 (still bad) 2013-Sep-26 00:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-26 00:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.114 (still bad) 2013-Sep-26 00:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-26 00:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.113 (still bad) 2013-Sep-26 00:26:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:26:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.003 1.074 1.108 0.875 2013-Sep-26 00:26:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.037 0.925 0.988 2013-Sep-26 00:26:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.997 0.934 0.894 0.066 2013-Sep-26 00:26:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.994 0.988 1.081 0.918 2013-Sep-26 00:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.122 (still bad) 2013-Sep-26 00:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.115 (still bad) 2013-Sep-26 00:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-26 00:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-26 00:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.127 (still bad) 2013-Sep-26 00:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.121 (still bad) 2013-Sep-26 00:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-26 00:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:27:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.066 < 0.75)! 2013-Sep-26 00:27:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.083 1.112 0.878 2013-Sep-26 00:27:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.035 0.921 0.983 2013-Sep-26 00:27:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.001 0.932 0.897 0.066 2013-Sep-26 00:27:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.994 1.083 0.924 2013-Sep-26 00:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:27:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.129 (still bad) 2013-Sep-26 00:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.107 (still bad) 2013-Sep-26 00:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.113 (still bad) 2013-Sep-26 00:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.127 (still bad) 2013-Sep-26 00:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.133 (still bad) 2013-Sep-26 00:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.127 (still bad) 2013-Sep-26 00:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-26 00:27:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.132 (still bad) 2013-Sep-26 00:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.115 (still bad) 2013-Sep-26 00:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.128 (still bad) 2013-Sep-26 00:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.116 (still bad) 2013-Sep-26 00:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-26 00:27:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.130 (still bad) 2013-Sep-26 00:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.112 (still bad) 2013-Sep-26 00:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.126 (still bad) 2013-Sep-26 00:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-26 00:28:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.128 (still bad) 2013-Sep-26 00:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:28:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-26 00:28:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.070 1.108 0.871 2013-Sep-26 00:28:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.047 0.948 1.011 2013-Sep-26 00:28:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.942 0.904 0.069 2013-Sep-26 00:28:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 1.007 1.094 0.935 2013-Sep-26 00:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.116 (still bad) 2013-Sep-26 00:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-26 00:28:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.118 (still bad) 2013-Sep-26 00:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-26 00:28:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.118 (still bad) 2013-Sep-26 00:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.116 (still bad) 2013-Sep-26 00:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-26 00:28:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-26 00:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-26 00:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-26 00:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:29:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-26 00:29:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.091 1.124 0.890 2013-Sep-26 00:29:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 1.055 0.947 1.009 2013-Sep-26 00:29:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.945 0.911 0.069 2013-Sep-26 00:29:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 1.008 1.098 0.937 2013-Sep-26 00:29:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-26 00:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-26 00:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.105 (still bad) 2013-Sep-26 00:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.126 (still bad) 2013-Sep-26 00:29:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.109 (still bad) 2013-Sep-26 00:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.119 (still bad) 2013-Sep-26 00:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.106 (still bad) 2013-Sep-26 00:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-26 00:29:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.110 (still bad) 2013-Sep-26 00:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.120 (still bad) 2013-Sep-26 00:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-26 00:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.113 (still bad) 2013-Sep-26 00:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.131 (still bad) 2013-Sep-26 00:29:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.114 (still bad) 2013-Sep-26 00:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.126 (still bad) 2013-Sep-26 00:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.138 (still bad) 2013-Sep-26 00:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.129 (still bad) 2013-Sep-26 00:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.125 (still bad) 2013-Sep-26 00:30:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.147 (still bad) 2013-Sep-26 00:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.120 (still bad) 2013-Sep-26 00:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.126 (still bad) 2013-Sep-26 00:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-26 00:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.130 (still bad) 2013-Sep-26 00:30:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:30:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:30:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.071 < 0.75)! 2013-Sep-26 00:30:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.076 1.111 0.882 2013-Sep-26 00:30:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.054 0.943 1.005 2013-Sep-26 00:30:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.949 0.912 0.071 2013-Sep-26 00:30:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 1.015 1.105 0.943 2013-Sep-26 00:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.121 (still bad) 2013-Sep-26 00:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.104 (still bad) 2013-Sep-26 00:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.125 (still bad) 2013-Sep-26 00:30:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.109 (still bad) 2013-Sep-26 00:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.116 (still bad) 2013-Sep-26 00:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.113 (still bad) 2013-Sep-26 00:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.108 (still bad) 2013-Sep-26 00:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.103 (still bad) 2013-Sep-26 00:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.122 (still bad) 2013-Sep-26 00:30:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.108 (still bad) 2013-Sep-26 00:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.117 (still bad) 2013-Sep-26 00:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.116 (still bad) 2013-Sep-26 00:30:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.111 (still bad) 2013-Sep-26 00:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:30:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:30:49 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:30:49 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:30:49 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2013-Sep-26 00:30:49 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:30:49 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Sep-26 00:30:49 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-26 00:30:49 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2013-Sep-26 00:30:49 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-26 00:30:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-26 00:30:49 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-26 00:30:49 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2013-Sep-26 00:30:49 COMMAND run_command_line: EXECUTING command 72: 'ENDIF' 2013-Sep-26 00:30:49 COMMAND run_command_line: EXECUTING command 75: 'IF LSTSLEW(NGC7817_p1_064) < 002714 THEN' 2013-Sep-26 00:30:51 LOG3 is_if_valid: Current source data: up 467.6 6.7 UP - - 56 0.9 2013-Sep-26 00:30:51 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC7817_p1_064) < 002714 2013-Sep-26 00:30:51 INFO5 is_if_valid: Condition parsed as: 0.42120600000000002 < 0.4538888888888889 2013-Sep-26 00:30:51 COMMAND run_command_line: EXECUTING command 76: 'FIXEDDRIFT az=106.25 alfaangle=-86.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_064 ra=235630.00 dec=201030.00' 2013-Sep-26 00:30:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-26 00:30:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-26 00:30:52 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 106.25 -86.9 hcorcal 5 tracking no off lcorcal first 1 NGC7817_p1_064 235630.00 201030.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:30:52 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-26 00:30:52 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2013-Sep-26 00:30:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC7817_p1_062' 2013-Sep-26 00:30:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-26 00:30:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC7817_p1_064} 2013-Sep-26 00:30:52 INFO3 fixed_driftmap: Sending telescope to Az = 106.25 and ZA = 7.33 2013-Sep-26 00:30:52 LOG3 track_source: Calling 'track_source NGC7817_p1_064 106.25 7.3306380983 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:30:52 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:30:52 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Sep-26 00:30:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_064} INFO {Slewing to source 'NGC7817_p1_064' ...} 2013-Sep-26 00:30:52 INFO1 track_source: Starting to track NGC7817_p1_064 2013-Sep-26 00:30:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_064" 2013-Sep-26 00:30:52 LOG3 vw_send: To DATATAKING: set ra 106.25 2013-Sep-26 00:30:52 LOG3 vw_send: To DATATAKING: set dec 7.3306380983 2013-Sep-26 00:30:52 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:30:52 LOG3 vw_send: To DATATAKING: pnt tr 106.25 7.3306380983 -CF 2013-Sep-26 00:30:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:30:52 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:30:52 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Sep-26 00:30:52 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:30:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:30:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:30:52 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Sep-26 00:30:53 START begin_task: Starting task 'rotate ALFA to -86.9 degrees' 2013-Sep-26 00:30:53 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Sep-26 00:30:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -86.9 degrees ...} 2013-Sep-26 00:30:53 INFO2 rotate_alfa: ALFA commanded to -86.9 degrees 2013-Sep-26 00:30:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION -86.9 REPLY 2013-Sep-26 00:30:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-26 00:30:53 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-26 00:30:53 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_064" 2013-Sep-26 00:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.066 and 1.111 (still bad) 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: set ra 106.25 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: vw% 106.25 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: set dec 7.3306380983 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: 7.3306380983 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: pnt tr 106.25 7.3306380983 -CF 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:30:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:32:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-26 00:32:26 INFO3 alfa_motor: ALFA rotator in-position -86.90 degrees 2013-Sep-26 00:32:26 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-26 00:32:26 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2013-Sep-26 00:32:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:32:26 STOP finish_task: Finishing task 'rotate ALFA to -86.9 degrees' 2013-Sep-26 00:32:26 LOG5 finish_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Sep-26 00:32:26 INFO2 finish_task: DONE finished configuration: rotating ALFA to -86.9 degrees 2013-Sep-26 00:32:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:26 STOP end_task: Finishing task 'rotate ALFA to -86.9 degrees' with status 'OK' 2013-Sep-26 00:32:26 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Sep-26 00:32:26 START begin_task: Starting task 'waiting on telescope' 2013-Sep-26 00:32:26 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Sep-26 00:32:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-26 00:32:26 LOG3 waittrk: Start waittrk 5 2013-Sep-26 00:32:26 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-26 00:32:26 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2013-Sep-26 00:32:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-26 00:32:31 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2013-Sep-26 00:32:31 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-26 00:32:31 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2013-Sep-26 00:32:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-26 00:32:31 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2013-Sep-26 00:32:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:32:31 INFO2 waittrk: Now tracking NGC7817_p1_064 2013-Sep-26 00:32:31 LOG4 waittrk: Current telescope position: Az = 466.11 ZA = 7.33 2013-Sep-26 00:32:31 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-26 00:32:31 LOG5 finish_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Sep-26 00:32:31 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-26 00:32:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-26 00:32:32 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Sep-26 00:32:32 START begin_task: Starting task 'selecting calibration type' 2013-Sep-26 00:32:32 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2013-Sep-26 00:32:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-26 00:32:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-26 00:32:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:32:32 START begin_task: Starting task 'waiting on setcal' 2013-Sep-26 00:32:32 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2013-Sep-26 00:32:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-26 00:32:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:32:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:32 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:32:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-26 00:32:32 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2013-Sep-26 00:32:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-26 00:32:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:32:32 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-26 00:32:32 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:32:32 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2013-Sep-26 00:32:32 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:32:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:32:32 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2013-Sep-26 00:32:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:32:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-26 00:32:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:32:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:32:32 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:32:33 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2013-Sep-26 00:32:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:33 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:32:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:32:33 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2013-Sep-26 00:32:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:32:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:32:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-26 00:32:33 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2013-Sep-26 00:32:33 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-26 00:32:33 INFO2 astwait: Waiting for 7 seconds from 04:32:33 to 04:32:40 UTC ... 2013-Sep-26 00:32:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-26 00:32:33 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-26 00:32:33 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Sep-26 00:32:40 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-26 00:32:40 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Sep-26 00:32:40 INFO3 astwait: Finished waiting 2013-Sep-26 00:32:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:32:40 LOG5 dopset_later: Calling 'dopset_later 61.123827769782011' 2013-Sep-26 00:32:40 INFO3 dopset_later: Setting Doppler correction for 00:33:40 (61.1 seconds from now) 2013-Sep-26 00:32:40 LOG5 antvel: Calling 'antvel 106.250000 7.330638 F Heliocentric 61.123827769782011' 2013-Sep-26 00:32:40 LOG2 antvel: Transforming current Az = 106.25 ZA = 7.33 to apparent RA = 23:57:14.1 Dec = +20:15:17.9 2013-Sep-26 00:32:40 LOG2 antvel: Parameters to Doppler: Heliocentric 16420 2013 269 0.0 2013-Sep-26 00:32:40 INFO5 antvel: Computed antenna velocity: -1.68499 km/s 2013-Sep-26 00:32:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-1.6849905369 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-26 00:32:40 INFO4 dopset_gen: New sky frequencies: 1381.251192 1381.251192 1381.251192 1381.251192 1381.251192 1381.251192 1381.251192 1381.251192 1381.251192 2013-Sep-26 00:32:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.251192 sky0=1381.251192 sky1=1381.251192 sky2=1381.251192 sky3=1381.251192 sky4=1381.251192 sky5=1381.251192 sky6=1381.251192 sky7=1381.251192 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-26 00:32:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.251192 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631251192.0} 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-26 00:32:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-26 00:32:40 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-26 00:32:40 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:55:33.9 Dec = +20:10:42.7 2013-Sep-26 00:32:40 LOG3 track_source: Calling 'track_source NGC7817_p1_064 235533.9 201042.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:32:40 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:32:40 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Sep-26 00:32:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_064} INFO {Slewing to source 'NGC7817_p1_064' ...} 2013-Sep-26 00:32:40 INFO1 track_source: Starting to track NGC7817_p1_064 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_064" 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: set ra 235533.9 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: set dec 201042.7 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: pnt tr 235533.9 201042.7 -CJ 2013-Sep-26 00:32:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:32:40 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:32:40 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Sep-26 00:32:40 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:32:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:32:41 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Sep-26 00:32:41 START begin_task: Starting task 'waiting on telescope' 2013-Sep-26 00:32:41 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Sep-26 00:32:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-26 00:32:41 LOG3 waittrk: Start waittrk 5 2013-Sep-26 00:32:41 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-26 00:32:41 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631251192.0} 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_064" 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: set ra 235533.9 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% 235533.9 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: set dec 201042.7 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: 201042.7 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: pnt tr 235533.9 201042.7 -CJ 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:32:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:32:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-26 00:32:46 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2013-Sep-26 00:32:46 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-26 00:32:46 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2013-Sep-26 00:32:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-26 00:32:47 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2013-Sep-26 00:32:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:32:47 INFO2 waittrk: Now tracking NGC7817_p1_064 2013-Sep-26 00:32:47 LOG4 waittrk: Current telescope position: Az = 466.11 ZA = 7.34 2013-Sep-26 00:32:47 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-26 00:32:47 LOG5 finish_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Sep-26 00:32:47 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-26 00:32:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-26 00:32:47 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Sep-26 00:32:47 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-26 00:32:47 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2013-Sep-26 00:32:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-26 00:32:47 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-26 00:32:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-26 00:32:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-26 00:32:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:32:47 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-26 00:32:47 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2013-Sep-26 00:32:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-26 00:32:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:32:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:50 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:32:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-26 00:32:50 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2013-Sep-26 00:32:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-26 00:32:50 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-26 00:32:50 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Sep-26 00:32:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-26 00:32:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:32:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:32:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:32:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-26 00:32:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-26 00:32:51 LOG5 begin_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2013-Sep-26 00:32:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-26 00:32:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 4 dB --- beam 1: 5 7 dB 2013-Sep-26 00:32:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-26 00:32:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-26 00:32:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-26 00:32:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-26 00:32:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-26 00:32:51 LOG5 end_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2013-Sep-26 00:32:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.027 1.084 ALFA beam 1: 0.913 1.085 2013-Sep-26 00:32:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.949 1.026 ALFA beam 3: 0.929 1.017 2013-Sep-26 00:32:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.018 0.987 ALFA beam 5: 0.955 0.067 2013-Sep-26 00:32:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.047 0.986 ALFA beam 7: 0.911 0.917 2013-Sep-26 00:32:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-26 00:32:51 LOG5 finish_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Sep-26 00:32:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-26 00:32:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-26 00:32:51 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Sep-26 00:32:51 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-26 00:32:51 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2013-Sep-26 00:32:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-26 00:32:51 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-26 00:32:52 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-26 00:32:52 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-26 00:32:52 LOG5 begin_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2013-Sep-26 00:32:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:32:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.084 0.913 1.085 2013-Sep-26 00:32:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 1.026 0.929 1.017 2013-Sep-26 00:32:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 0.987 0.955 0.067 2013-Sep-26 00:32:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.986 0.911 0.917 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.2 B 31.6 31.9 mn:A 0.4 0.4 B 0.4 1.0 gn: 8 12 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.0 30.6 B 30.7 32.5 mn:A 1.2 0.3 B 0.3 0.1 gn: 10 13 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.8 27.8 B 33.4 28.0 mn:A -0.1 -0.4 B -0.1 0.9 gn: 10 9 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.4 29.9 B 29.0 29.0 mn:A 1.3 0.9 B 0.8 1.2 gn: 12 8 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.1 28.2 B 28.5 29.9 mn:A 0.2 -0.1 B 0.4 0.2 gn: 6 9 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.8 B 31.3 29.1 mn:A 0.2 -0.6 B -0.1 0.4 gn: 7 10 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.7 30.4 B 33.2 29.6 mn:A 0.2 -0.3 B -0.3 -0.3 gn: 9 11 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.2 29.5 B 29.6 30.9 mn:A 0.1 0.2 B -0.0 0.6 gn: 9 11 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b4s0g0 rms:A 32.2 31.2 B 29.8 29.9 mn:A -0.0 0.7 B 0.4 -0.3 gn: 5 6 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.8 29.7 B 30.8 29.6 mn:A 0.0 0.1 B -0.1 0.6 gn: 7 8 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.0 30.7 B 29.0 29.0 mn:A 0.9 -0.1 B 1.4 0.6 gn: 7 26 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.5 31.1 B 28.9 28.7 mn:A 1.1 -0.1 B -1.2 0.8 gn: 7 27 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.8 29.6 B 29.9 30.9 mn:A -0.1 1.5 B -0.3 -0.3 gn: 7 13 2013-Sep-26 00:32:58 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.8 27.6 B 28.7 28.9 mn:A 1.0 0.7 B -1.2 -0.9 gn: 8 14 2013-Sep-26 00:32:58 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-26 00:32:58 LOG5 end_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2013-Sep-26 00:32:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-26 00:32:58 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-26 00:32:58 LOG5 finish_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2013-Sep-26 00:32:58 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-26 00:32:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:58 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-26 00:32:58 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2013-Sep-26 00:32:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-26 00:32:58 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-26 00:32:58 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2013-Sep-26 00:32:58 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-26 00:32:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:32:58 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-26 00:32:58 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2013-Sep-26 00:32:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:32:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:32:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:32:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-26 00:32:59 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-26 00:32:59 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-26 00:32:59 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-26 00:32:59 START begin_task: Starting task 'selecting calibration type' 2013-Sep-26 00:32:59 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-26 00:32:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-26 00:32:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:32:59 START begin_task: Starting task 'waiting on setcal' 2013-Sep-26 00:32:59 LOG5 begin_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-26 00:32:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-26 00:32:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-26 00:32:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:59 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-26 00:32:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-26 00:32:59 LOG5 end_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-26 00:32:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:32:59 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-26 00:32:59 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:32:59 LOG5 begin_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:32:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:32:59 LOG5 end_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:32:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-26 00:32:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-26 00:32:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:32:59 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-26 00:32:59 LOG5 begin_task: Level: (5) ID = <10347> Status = 0 0 0 0 ok 2013-Sep-26 00:32:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:32:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20130926.a2048.0002.fits 2013-Sep-26 00:32:59 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-26 00:33:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-26 00:33:00 LOG5 end_task: Level: (5) ID = <10347> Status = 0 0 0 0 ok 2013-Sep-26 00:33:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-26 00:33:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-26 00:33:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-26 00:33:00 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2013-Sep-26 00:33:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-26 00:33:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-26 00:33:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-26 00:33:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-26 00:33:00 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2013-Sep-26 00:33:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130926.a2048.0002.fits} 2013-Sep-26 00:33:00 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-26 00:33:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-26 00:33:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-26 00:33:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-26 00:33:00 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2013-Sep-26 00:33:00 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-26 00:33:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:33:00 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2013-Sep-26 00:33:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-26 00:33:00 LOG5 log_alfabeam: Parameters: 23.926083333333334 20.178527777777781 0.442416 2013.7365445407763 -86.900024 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 0 23.926083333333331 20.178527777777774 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 1 23.924155189307307 20.269524167037588 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 2 23.918813881554293 20.208465514004839 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 3 23.920800372184999 20.117145412294917 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 4 23.928088614713566 20.088344514741781 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 5 23.933352594553128 20.148659756301999 2013-Sep-26 00:33:00 LOG4 log_alfabeam: ALFABEAM 6 23.931404784426725 20.238522133129848 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: object=NGC7817_p1_064 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:33:00 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: patternid=326900006 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: scanid=326900007 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: topoafreqhz=1456251192.0 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: topobfreqhz=1306251192.0 2013-Sep-26 00:33:01 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:33:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:33:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_064:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326900006:scanid=326900007:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251192.0:topobfreqhz=1306251192.0:filetype=1 2013-Sep-26 00:33:01 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:33:01 LOG5 begin_task: Level: (5) ID = <10350> Status = 0 0 0 0 ok 2013-Sep-26 00:33:01 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:33:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:33:01 LOG5 end_task: Level: (5) ID = <10350> Status = 0 0 0 0 ok 2013-Sep-26 00:33:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:33:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:33:01 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-26 00:33:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:33:01 LOG5 begin_task: Level: (5) ID = <10351> Status = 0 0 0 0 ok 2013-Sep-26 00:33:01 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:33:01 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:33:01 LOG5 end_task: Level: (5) ID = <10351> Status = 0 0 0 0 ok 2013-Sep-26 00:33:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:33:01 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326900007 2013-Sep-26 00:33:02 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:33:02 LOG5 begin_task: Level: (5) ID = <10352> Status = 0 0 0 0 ok 2013-Sep-26 00:33:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:33:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:33:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:33:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-26 00:33:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16383.00 2013-Sep-26 00:33:03 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2013-Sep-26 00:33:03 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:33:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-26 00:33:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-26 00:33:03 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:33:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:33:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:06 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:33:06.01 2013-Sep-26 00:33:06 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380169986.01 Thu Sep 26 00:33:06 2013 2013-Sep-26 00:33:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251192 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:33:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:33:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.465 (still bad) 2013-Sep-26 00:33:11 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:33:12 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:33:12 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:33:12 LOG5 end_task: Level: (5) ID = <10352> Status = 0 0 0 0 ok 2013-Sep-26 00:33:12 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:33:12 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2013-Sep-26 00:33:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-26 00:33:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-26 00:33:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-26 00:33:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-26 00:33:12 LOG5 begin_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2013-Sep-26 00:33:12 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-26 00:33:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-26 00:33:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-26 00:33:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-26 00:33:12 LOG5 end_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2013-Sep-26 00:33:12 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-26 00:33:12 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:33:12 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2013-Sep-26 00:33:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-26 00:33:12 LOG5 log_alfabeam: Parameters: 23.926083333333334 20.178527777777781 0.446037 2013.7365449527215 -86.900024 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 0 23.926083333333331 20.178527777777791 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 1 23.924142432234365 20.269468828678200 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 2 23.918809782935991 20.208267297216871 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 3 23.920808683000697 20.117006390597588 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 4 23.928100712467213 20.088396428375212 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 5 23.933356673905472 20.148857045860169 2013-Sep-26 00:33:12 LOG4 log_alfabeam: ALFABEAM 6 23.931396429820115 20.238671300135461 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: object=NGC7817_p1_064 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:33:12 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: patternid=326900006 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: scanid=326900008 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: topoafreqhz=1456251192.0 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: topobfreqhz=1306251192.0 2013-Sep-26 00:33:13 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:33:13 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:33:13 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_064:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326900006:scanid=326900008:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251192.0:topobfreqhz=1306251192.0:filetype=1 2013-Sep-26 00:33:13 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:33:13 LOG5 begin_task: Level: (5) ID = <10355> Status = 0 0 0 0 ok 2013-Sep-26 00:33:13 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:33:13 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:33:13 LOG5 end_task: Level: (5) ID = <10355> Status = 0 0 0 0 ok 2013-Sep-26 00:33:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:33:13 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:33:13 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-26 00:33:13 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:33:13 LOG5 begin_task: Level: (5) ID = <10356> Status = 0 0 0 0 ok 2013-Sep-26 00:33:13 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:33:13 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:33:13 LOG5 end_task: Level: (5) ID = <10356> Status = 0 0 0 0 ok 2013-Sep-26 00:33:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:33:13 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326900008 2013-Sep-26 00:33:14 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:33:14 LOG5 begin_task: Level: (5) ID = <10357> Status = 0 0 0 0 ok 2013-Sep-26 00:33:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:33:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:33:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:33:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-26 00:33:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16395.00 2013-Sep-26 00:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.520 (still bad) 2013-Sep-26 00:33:15 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:33:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-26 00:33:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-26 00:33:18 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:33:18.02 2013-Sep-26 00:33:18 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380169998.02 Thu Sep 26 00:33:18 2013 2013-Sep-26 00:33:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251192 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:33:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:33:20 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-26 00:33:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-26 00:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-26 00:33:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-26 00:33:24 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-26 00:33:24 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-26 00:33:24 LOG5 end_task: Level: (5) ID = <10357> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-26 00:33:24 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-26 00:33:24 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-26 00:33:24 LOG5 finish_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-26 00:33:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:33:24 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-26 00:33:24 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-26 00:33:24 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 106.25 and ZA = 7.33 2013-Sep-26 00:33:24 LOG3 track_source: Calling 'track_source NGC7817_p1_064 106.25 7.3306380983 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-26 00:33:24 START begin_task: Starting task 'sending tracking commands' 2013-Sep-26 00:33:24 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_064} INFO {Slewing to source 'NGC7817_p1_064' ...} 2013-Sep-26 00:33:24 INFO1 track_source: Starting to track NGC7817_p1_064 2013-Sep-26 00:33:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_064" 2013-Sep-26 00:33:24 LOG3 vw_send: To DATATAKING: set ra 106.25 2013-Sep-26 00:33:24 LOG3 vw_send: To DATATAKING: set dec 7.3306380983 2013-Sep-26 00:33:24 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-26 00:33:24 LOG3 vw_send: To DATATAKING: pnt tr 106.25 7.3306380983 -CF 2013-Sep-26 00:33:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:33:24 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-26 00:33:24 LOG5 finish_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-26 00:33:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-26 00:33:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-26 00:33:24 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2013-Sep-26 00:33:24 LOG1 fixed_driftmap: Parameters: HA = +00:30:00.6 Start = 00:27:14.9 LST = 00:26:57.8 diff = 86417.2 secs 2013-Sep-26 00:33:24 INFO2 fixed_driftmap: Waiting 86415.2 seconds for RA 23:57:14 2013-Sep-26 00:33:25 INFO2 lstwait: Waiting for 15.1 secs from LST 00:26:58 to LST 00:27:13 ... 2013-Sep-26 00:33:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.12815818642712 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-26 00:33:25 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-26 00:33:25 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_064" 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: set ra 106.25 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: vw% 106.25 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: set dec 7.3306380983 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: 7.3306380983 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: pnt tr 106.25 7.3306380983 -CF 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-26 00:33:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-26 00:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-26 00:33:40 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-26 00:33:40 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2013-Sep-26 00:33:40 LOG4 lstwait: Finished waiting 0.88 seconds late 2013-Sep-26 00:33:40 INFO3 lstwait: Finished waiting 2013-Sep-26 00:33:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-26 00:33:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-26 00:33:40 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-26 00:33:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-26 00:33:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-26 00:33:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-26 00:33:40 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2013-Sep-26 00:33:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-26 00:33:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: object=NGC7817_p1_064 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: patternid=326900009 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: scanid=326900009 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-26 00:33:40 TEST take_mock_data: PSET configuration: topoafreqhz=1456251192.0 2013-Sep-26 00:33:41 TEST take_mock_data: PSET configuration: topobfreqhz=1306251192.0 2013-Sep-26 00:33:41 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-26 00:33:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-26 00:33:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_064:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326900009:scanid=326900009:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456251192.0:topobfreqhz=1306251192.0:filetype=1 2013-Sep-26 00:33:41 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-26 00:33:41 LOG5 begin_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2013-Sep-26 00:33:41 LOG4 from_mock: From MOCK: psetok 2013-Sep-26 00:33:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-26 00:33:41 LOG5 end_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2013-Sep-26 00:33:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-26 00:33:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-26 00:33:41 LOG3 socket_wait: To MOCK: STAR600 2013-Sep-26 00:33:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-26 00:33:41 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2013-Sep-26 00:33:41 LOG4 from_mock: From MOCK: starok 2013-Sep-26 00:33:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-26 00:33:41 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2013-Sep-26 00:33:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-26 00:33:41 INFO2 take_data: Starting WAPP+Mock 600-second scan: 326900009 2013-Sep-26 00:33:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-26 00:33:41 LOG5 begin_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2013-Sep-26 00:33:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-26 00:33:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-26 00:33:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-26 00:33:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-26 00:33:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16422.00 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.251192 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 1044.500000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 1021.500000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 998.500000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 975.500000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 30.000000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 230.000000 MHz 2013-Sep-26 00:33:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.251192 MHz Flip = 1 Band = 0 Mixer = 370.000000 MHz 2013-Sep-26 00:33:43 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-26 00:33:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Sep-26 00:33:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-26 00:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:33:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:33:46.01 2013-Sep-26 00:33:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380170026.01 Thu Sep 26 00:33:46 2013 2013-Sep-26 00:33:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-26 00:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-26 00:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.114 (still bad) 2013-Sep-26 00:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.101 (still bad) 2013-Sep-26 00:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.113 (still bad) 2013-Sep-26 00:33:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:33:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.094 0.915 1.110 2013-Sep-26 00:33:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 1.036 0.923 1.025 2013-Sep-26 00:33:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 0.983 0.948 0.067 2013-Sep-26 00:33:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.982 0.916 0.912 2013-Sep-26 00:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.101 (still bad) 2013-Sep-26 00:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.096 (still bad) 2013-Sep-26 00:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.099 (still bad) 2013-Sep-26 00:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.111 (still bad) 2013-Sep-26 00:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.106 (still bad) 2013-Sep-26 00:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.101 (still bad) 2013-Sep-26 00:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.094 (still bad) 2013-Sep-26 00:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-26 00:34:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.099 (still bad) 2013-Sep-26 00:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.114 (still bad) 2013-Sep-26 00:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.120 (still bad) 2013-Sep-26 00:34:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.111 (still bad) 2013-Sep-26 00:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-26 00:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.123 (still bad) 2013-Sep-26 00:34:37 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:34:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-26 00:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:34:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.121 (still bad) 2013-Sep-26 00:34:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-26 00:34:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:34:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.108 0.924 1.132 2013-Sep-26 00:34:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.046 0.926 1.028 2013-Sep-26 00:34:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 0.989 0.956 0.067 2013-Sep-26 00:34:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.991 0.927 0.922 2013-Sep-26 00:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:35:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.130 (still bad) 2013-Sep-26 00:35:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.114 (still bad) 2013-Sep-26 00:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.127 (still bad) 2013-Sep-26 00:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.126 (still bad) 2013-Sep-26 00:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-26 00:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-26 00:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.127 (still bad) 2013-Sep-26 00:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-26 00:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-26 00:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-26 00:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-26 00:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-26 00:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.111 (still bad) 2013-Sep-26 00:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:35:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.126 (still bad) 2013-Sep-26 00:35:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.112 (still bad) 2013-Sep-26 00:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:35:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:35:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 1.097 0.921 1.116 2013-Sep-26 00:35:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.042 0.925 1.027 2013-Sep-26 00:35:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 0.989 0.957 0.067 2013-Sep-26 00:35:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.986 0.920 0.916 2013-Sep-26 00:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.110 (still bad) 2013-Sep-26 00:36:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.132 (still bad) 2013-Sep-26 00:36:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.135 (still bad) 2013-Sep-26 00:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-26 00:36:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.128 (still bad) 2013-Sep-26 00:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.110 (still bad) 2013-Sep-26 00:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-26 00:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-26 00:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.125 (still bad) 2013-Sep-26 00:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-26 00:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:36:37 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.102 (still bad) 2013-Sep-26 00:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.114 (still bad) 2013-Sep-26 00:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.114 (still bad) 2013-Sep-26 00:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-26 00:36:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.103 (still bad) 2013-Sep-26 00:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-26 00:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:36:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:36:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.086 0.913 1.100 2013-Sep-26 00:36:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.041 0.927 1.026 2013-Sep-26 00:36:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 0.990 0.956 0.067 2013-Sep-26 00:36:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.978 0.911 0.908 2013-Sep-26 00:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.122 (still bad) 2013-Sep-26 00:37:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:37:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.103 (still bad) 2013-Sep-26 00:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.110 (still bad) 2013-Sep-26 00:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-26 00:37:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:37:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.106 (still bad) 2013-Sep-26 00:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-26 00:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.120 (still bad) 2013-Sep-26 00:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-26 00:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.123 (still bad) 2013-Sep-26 00:37:25 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:37:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.103 (still bad) 2013-Sep-26 00:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-26 00:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.119 (still bad) 2013-Sep-26 00:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.113 (still bad) 2013-Sep-26 00:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-26 00:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.119 (still bad) 2013-Sep-26 00:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.111 (still bad) 2013-Sep-26 00:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-26 00:37:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.067 < 0.75)! 2013-Sep-26 00:37:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.087 0.913 1.098 2013-Sep-26 00:37:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.031 0.920 1.018 2013-Sep-26 00:37:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 0.987 0.947 0.067 2013-Sep-26 00:37:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.979 0.913 0.910 2013-Sep-26 00:38:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.122 (still bad) 2013-Sep-26 00:38:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.121 (still bad) 2013-Sep-26 00:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.119 (still bad) 2013-Sep-26 00:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.110 (still bad) 2013-Sep-26 00:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:38:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.127 (still bad) 2013-Sep-26 00:38:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-26 00:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.118 (still bad) 2013-Sep-26 00:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.113 (still bad) 2013-Sep-26 00:38:25 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.132 (still bad) 2013-Sep-26 00:38:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.104 (still bad) 2013-Sep-26 00:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.133 (still bad) 2013-Sep-26 00:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:38:37 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.131 (still bad) 2013-Sep-26 00:38:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.101 (still bad) 2013-Sep-26 00:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-26 00:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.113 (still bad) 2013-Sep-26 00:38:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.133 (still bad) 2013-Sep-26 00:38:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.118 (still bad) 2013-Sep-26 00:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.135 (still bad) 2013-Sep-26 00:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.117 (still bad) 2013-Sep-26 00:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:39:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.073 < 0.75)! 2013-Sep-26 00:39:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.115 0.933 1.132 2013-Sep-26 00:39:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 1.060 0.940 1.044 2013-Sep-26 00:39:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.034 1.009 0.967 0.073 2013-Sep-26 00:39:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.999 0.935 0.930 2013-Sep-26 00:39:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.131 (still bad) 2013-Sep-26 00:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.115 (still bad) 2013-Sep-26 00:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:39:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.126 (still bad) 2013-Sep-26 00:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.098 (still bad) 2013-Sep-26 00:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.124 (still bad) 2013-Sep-26 00:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.109 (still bad) 2013-Sep-26 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.109 (still bad) 2013-Sep-26 00:39:25 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-26 00:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-26 00:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.125 (still bad) 2013-Sep-26 00:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.113 (still bad) 2013-Sep-26 00:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.106 (still bad) 2013-Sep-26 00:39:37 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.128 (still bad) 2013-Sep-26 00:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-26 00:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.116 (still bad) 2013-Sep-26 00:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.110 (still bad) 2013-Sep-26 00:39:49 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.132 (still bad) 2013-Sep-26 00:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.125 (still bad) 2013-Sep-26 00:40:01 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:40:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:40:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-26 00:40:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.105 0.926 1.123 2013-Sep-26 00:40:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 1.033 0.924 1.020 2013-Sep-26 00:40:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.000 0.967 0.068 2013-Sep-26 00:40:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.992 0.931 0.923 2013-Sep-26 00:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-26 00:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.108 (still bad) 2013-Sep-26 00:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.100 (still bad) 2013-Sep-26 00:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.123 (still bad) 2013-Sep-26 00:40:13 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:40:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-26 00:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.105 (still bad) 2013-Sep-26 00:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.120 (still bad) 2013-Sep-26 00:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.117 (still bad) 2013-Sep-26 00:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.107 (still bad) 2013-Sep-26 00:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.099 (still bad) 2013-Sep-26 00:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.120 (still bad) 2013-Sep-26 00:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.102 (still bad) 2013-Sep-26 00:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.114 (still bad) 2013-Sep-26 00:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.111 (still bad) 2013-Sep-26 00:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.097 (still bad) 2013-Sep-26 00:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.120 (still bad) 2013-Sep-26 00:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 2013-Sep-26 00:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.112 (still bad) 2013-Sep-26 00:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.110 (still bad) 2013-Sep-26 00:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.067 and 1.103 (still bad) 20