2013-Sep-24 22:00:29 BEGIN executive: CIMA executive starting ... 2013-Sep-24 22:00:29 NOTE executive: STARTING NEW CIMA SESSION 2013-Sep-24 22:00:29 INFO1 executive: Using CIMA version 3.3.11 'stable' from 2013-09-23 10:36 2013-Sep-24 22:00:29 INFO4 executive: This is an ON-LINE session 2013-Sep-24 22:00:29 INFO4 executive: This is a LOCAL session 2013-Sep-24 22:00:29 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2013-Sep-24 22:00:29 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Elliot Gonzalez' 2013-Sep-24 22:00:29 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20130924' 2013-Sep-24 22:00:30 LOG2 log_preferences: Currently applied preferences: 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(dailylog) = daily 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(offlinelog) = write 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(datawindow) = ignore 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(limitwarning) = enabled 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(wappfailure) = abort 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(helpstyle) = stay-open 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(logcolours) = full 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(displaylevel) = LOG5 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(loglevel) = LOG5 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(displayformat) = long 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(logformat) = new 2013-Sep-24 22:00:30 LOG2 log_preferences: prefs(fontsize) = 4 2013-Sep-24 22:00:30 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2013-Sep-24 22:00:30 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2013-Sep-24 22:00:30 ALERT executive: CIMA executive ready 2013-Sep-24 22:00:31 NOTE frontend: CIMA frontend ready 2013-Sep-24 22:00:32 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2013-Sep-24 22:00:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:00:33 LOG4 got_cormsg: From DATATAKING: setup 2013-Sep-24 22:00:35 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2013-Sep-24 22:00:35 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2013-Sep-24 22:00:35 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2013-Sep-24 22:00:35 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2013-Sep-24 22:00:35 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Sep-24 22:00:35 NOTE select_receiver: Starting to select receiver ALFA 2013-Sep-24 22:00:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Sep-24 22:00:35 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Sep-24 22:00:35 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Sep-24 22:00:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Sep-24 22:00:36 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Sep-24 22:00:36 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Sep-24 22:00:36 DONE finish_task: DONE finished selecting: receiver ALFA 2013-Sep-24 22:00:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:00:36 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Sep-24 22:00:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% io 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% tape off 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% connectall 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:00:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:00:45 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2013-Sep-24 22:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:11 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2013-Sep-24 22:01:11 INFO4 CIMA-load_command_file: Loaded command file '130924.cmd' 2013-Sep-24 22:01:13 INFO1 CIMA-run_command_file: Transferring command file '130924.cmd' to executive ... 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES7619_p1_033) < 222143 THEN} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=305.23 alfaangle=66.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_033 ra=231000.00 dec=92200.00} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES7619_p1_111) < 224443 THEN} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=328.94 alfaangle=45.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_111 ra=231000.00 dec=72500.00} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES7619_p1_109) < 230743 THEN} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=356.04 alfaangle=22.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_109 ra=231000.00 dec=72800.00} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2013-Sep-24 22:01:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES7619_p1_107) < 233043 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=24.97 alfaangle=-1.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_107 ra=231000.00 dec=73100.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(NGC7817_p1_050) < 000114 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=157.44 alfaangle=39.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_050 ra=235630.00 dec=203130.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 68 {IF LSTSLEW(NGC7817_p1_052) < 001414 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 69 {FIXEDDRIFT az=119.47 alfaangle=77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_052 ra=235630.00 dec=202830.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 72 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 75 {IF LSTSLEW(NGC7817_p1_054) < 002714 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 76 {FIXEDDRIFT az=108.14 alfaangle=-89.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_054 ra=235630.00 dec=202530.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 79 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 82 {IF LSTSLEW(NGC7817_p1_056) < 004013 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 83 {FIXEDDRIFT az=103.46 alfaangle=-82.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_056 ra=235630.00 dec=202230.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 86 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 89 {IF LSTSLEW(NGC7817_p1_058) < 005313 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 90 {FIXEDDRIFT az=101.12 alfaangle=-78.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_058 ra=235630.00 dec=201930.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 93 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 96 {IF LSTSLEW(NGC877_p1_028) < 011246 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 97 {FIXEDDRIFT az=281.06 alfaangle=-88.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC877_p1_028 ra=21300.00 dec=144930.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 100 {ENDIF} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 103 {IF LSTSLEW(NGC877_p1_046) < 012546 THEN} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 104 {FIXEDDRIFT az=287.01 alfaangle=85.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC877_p1_046 ra=21300.00 dec=142230.00} 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 107 {ENDIF} 2013-Sep-24 22:01:14 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: run_command_file 130924.cmd 1 1 49 2013-Sep-24 22:01:14 LOG4 run_command_file: Calling 'run_command_file 130924.cmd 1 1 49' 2013-Sep-24 22:01:14 BEGIN begin_task: Starting task 'running command file '130924.cmd'' 2013-Sep-24 22:01:14 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2013-Sep-24 22:01:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130924.cmd' ...} 2013-Sep-24 22:01:14 NOTE run_command_file: Starting execution of command file '130924.cmd' from line 1 2013-Sep-24 22:01:14 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2013-Sep-24 22:01:14 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Sep-24 22:01:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:01:14 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Sep-24 22:01:14 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Sep-24 22:01:15 LOG1 CIMA-check_alfa_biasmon: Current ALFA Bias monitering Status is : OFF 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Sep-24 22:01:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-24 22:01:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Sep-24 22:01:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Sep-24 22:01:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Sep-24 22:01:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:01:18 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Sep-24 22:01:18 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Sep-24 22:01:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Sep-24 22:01:18 INFO1 config_iflo: Selecting receiver ALFA 2013-Sep-24 22:01:18 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2013-Sep-24 22:01:18 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2013-Sep-24 22:01:18 START begin_task: Starting task 'selecting receiver ALFA' 2013-Sep-24 22:01:18 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 NOTE select_receiver: Starting to select receiver ALFA 2013-Sep-24 22:01:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Sep-24 22:01:18 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Sep-24 22:01:18 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Sep-24 22:01:18 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Sep-24 22:01:18 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Sep-24 22:01:18 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 INFO2 finish_task: DONE finished selecting: receiver ALFA 2013-Sep-24 22:01:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:01:18 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Sep-24 22:01:18 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 START begin_task: Starting task 'waiting for receiver ALFA' 2013-Sep-24 22:01:18 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2013-Sep-24 22:01:18 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 INFO1 config_iflo: Configuring rest of the IF/LO path 2013-Sep-24 22:01:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2013-Sep-24 22:01:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:01:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:01:18 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:01:18 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2013-Sep-24 22:01:18 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:01:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:01:18 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2013-Sep-24 22:01:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:01:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: alfafb 1 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2013-Sep-24 22:01:19 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Sep-24 22:01:19 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2013-Sep-24 22:01:20 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2013-Sep-24 22:01:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Sep-24 22:01:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:01:20 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Sep-24 22:01:20 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: alfafb 1 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2013-Sep-24 22:01:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:34 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:01:34 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Sep-24 22:01:34 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Sep-24 22:01:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Sep-24 22:01:34 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Sep-24 22:01:34 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Sep-24 22:01:34 DONE finish_task: DONE finished configuration: IF/LO path 2013-Sep-24 22:01:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:01:34 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Sep-24 22:01:34 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Sep-24 22:01:34 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Sep-24 22:01:34 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Sep-24 22:01:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Sep-24 22:01:34 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Sep-24 22:01:34 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Sep-24 22:01:34 START begin_task: Starting task 'selecting calibration port' 2013-Sep-24 22:01:34 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2013-Sep-24 22:01:34 LOG3 vw_send: To DATATAKING: calport 3 2013-Sep-24 22:01:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Sep-24 22:01:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:01:34 START begin_task: Starting task 'waiting on calport' 2013-Sep-24 22:01:34 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2013-Sep-24 22:01:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:34 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Sep-24 22:01:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:01:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:35 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:01:35 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Sep-24 22:01:35 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2013-Sep-24 22:01:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Sep-24 22:01:35 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Sep-24 22:01:35 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2013-Sep-24 22:01:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:01:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:01:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:01:35 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2013-Sep-24 22:01:35 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:01:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:01:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:01:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:01:35 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Sep-24 22:01:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Sep-24 22:01:36 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Sep-24 22:01:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:01:36 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Sep-24 22:01:36 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:01:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:01:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:01:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:01:36 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:01:36 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Sep-24 22:01:36 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Sep-24 22:01:36 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Sep-24 22:01:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:01:36 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Sep-24 22:01:36 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Sep-24 22:01:36 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2013-Sep-24 22:01:36 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Sep-24 22:01:36 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2013-Sep-24 22:01:37 LOG3 is_if_valid: Current source data: down 260.0 27.5 33 - - 199 3.6 2013-Sep-24 22:01:37 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Sep-24 22:01:37 INFO5 is_if_valid: Condition parsed as: 0 2013-Sep-24 22:01:37 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2013-Sep-24 22:01:37 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2013-Sep-24 22:01:37 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2013-Sep-24 22:01:37 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2013-Sep-24 22:01:37 LOG3 is_if_valid: Current source data: up 293.7 18.8 UP - - 143 3.3 2013-Sep-24 22:01:37 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2013-Sep-24 22:01:37 INFO5 is_if_valid: Condition parsed as: 1 2013-Sep-24 22:01:37 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2013-Sep-24 22:01:37 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2013-Sep-24 22:01:37 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2013-Sep-24 22:01:37 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Sep-24 22:01:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2013-Sep-24 22:01:37 LOG3 track_source: Calling 'track_source galfasrc2 230000.0 +100000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Sep-24 22:01:37 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:01:37 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Sep-24 22:01:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2013-Sep-24 22:01:37 INFO1 track_source: Starting to track galfasrc2 2013-Sep-24 22:01:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2013-Sep-24 22:01:37 LOG3 vw_send: To DATATAKING: set ra 230000.0 2013-Sep-24 22:01:37 LOG3 vw_send: To DATATAKING: set dec +100000 2013-Sep-24 22:01:37 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:01:37 LOG3 vw_send: To DATATAKING: pnt tr 230000.0 +100000 -CJ 2013-Sep-24 22:01:38 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Sep-24 22:01:38 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:01:38 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Sep-24 22:01:38 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:01:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:01:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:01:38 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Sep-24 22:01:38 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2013-Sep-24 22:01:38 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Sep-24 22:01:38 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2013-Sep-24 22:01:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:01:38 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2013-Sep-24 22:01:38 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Sep-24 22:01:38 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2013-Sep-24 22:01:38 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Sep-24 22:01:38 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2013-Sep-24 22:01:38 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Sep-24 22:01:38 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Sep-24 22:01:38 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Sep-24 22:01:38 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2013-Sep-24 22:01:38 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2013-Sep-24 22:01:38 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Sep-24 22:01:38 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Sep-24 22:01:38 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Sep-24 22:01:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Sep-24 22:01:38 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Sep-24 22:01:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Sep-24 22:01:38 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-24 22:01:38 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-24 22:01:38 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2013-Sep-24 22:01:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20130924.a2048.0002.fits 2013-Sep-24 22:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2013-Sep-24 22:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Sep-24 22:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Sep-24 22:01:39 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20130924.a2048.0002.fits} 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: set ra 230000.0 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: vw% 230000.0 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: set dec +100000 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: +100000 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: pnt tr 230000.0 +100000 -CJ 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Sep-24 22:01:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 22:01:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-24 22:01:50 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Sep-24 22:01:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-24 22:01:50 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2013-Sep-24 22:01:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:01:50 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Sep-24 22:01:50 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Sep-24 22:01:50 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Sep-24 22:01:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:01:50 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Sep-24 22:01:50 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Sep-24 22:01:50 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2013-Sep-24 22:01:50 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Sep-24 22:01:50 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Sep-24 22:01:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 22:01:50 LOG3 waittrk: Start waittrk 5 2013-Sep-24 22:01:50 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 22:01:50 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2013-Sep-24 22:01:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 22:01:56 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2013-Sep-24 22:01:56 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 22:01:56 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Sep-24 22:04:39 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 22:04:39 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Sep-24 22:04:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:04:39 INFO2 waittrk: Now tracking galfasrc2 2013-Sep-24 22:04:39 LOG4 waittrk: Current telescope position: Az = 294.42 ZA = 18.17 2013-Sep-24 22:04:39 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 22:04:39 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Sep-24 22:04:39 DONE finish_task: DONE finished waiting: telescope on source 2013-Sep-24 22:04:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:04:40 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 22:04:40 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Sep-24 22:04:40 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Sep-24 22:04:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Sep-24 22:04:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:04:40 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Sep-24 22:04:40 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Sep-24 22:04:40 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Sep-24 22:04:40 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2013-Sep-24 22:04:40 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Sep-24 22:04:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Sep-24 22:04:40 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 22:04:40 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2013-Sep-24 22:04:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 22:04:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 22:04:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:04:40 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 22:04:40 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2013-Sep-24 22:04:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 22:04:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:04:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:41 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:04:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 22:04:41 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2013-Sep-24 22:04:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 22:04:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:04:41 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 22:04:41 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:04:41 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Sep-24 22:04:41 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:04:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:04:41 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Sep-24 22:04:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:04:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 22:04:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:04:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:04:41 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:04:41 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Sep-24 22:04:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:41 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:04:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:04:41 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Sep-24 22:04:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:04:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:04:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 22:04:41 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2013-Sep-24 22:04:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:04:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:04:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:04:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:04:41 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20130924.a2048.0002.fits' is empty! 2013-Sep-24 22:04:41 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Sep-24 22:04:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-24 22:04:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Sep-24 22:04:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:04:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:04:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:04:42 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2013-Sep-24 22:04:42 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:04:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:04:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:04:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:04:42 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2013-Sep-24 22:04:42 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Sep-24 22:04:42 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-24 22:04:42 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Sep-24 22:04:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Sep-24 22:04:42 INFO2 adjust_power: Starting to adjust WAPP power 2013-Sep-24 22:04:42 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-24 22:04:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-24 22:04:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:04:42 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-24 22:04:42 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2013-Sep-24 22:04:42 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-24 22:04:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 22:04:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:04:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:43 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:04:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-24 22:04:43 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2013-Sep-24 22:04:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-24 22:04:43 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-24 22:04:44 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Sep-24 22:04:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 22:04:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:04:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:04:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:04:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:04:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-24 22:04:44 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2013-Sep-24 22:04:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-24 22:04:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 10 6 dB --- beam 1: 5 9 dB 2013-Sep-24 22:04:44 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 7 dB --- beam 3: 7 5 dB 2013-Sep-24 22:04:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 9 dB --- beam 5: 10 0 dB 2013-Sep-24 22:04:44 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Sep-24 22:04:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-24 22:04:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-24 22:04:44 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2013-Sep-24 22:04:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.998 0.902 ALFA beam 1: 1.096 0.906 2013-Sep-24 22:04:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.093 1.063 ALFA beam 3: 0.973 1.068 2013-Sep-24 22:04:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.059 1.081 ALFA beam 5: 0.873 0.069 2013-Sep-24 22:04:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.983 0.901 ALFA beam 7: 1.058 1.074 2013-Sep-24 22:04:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-24 22:04:44 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Sep-24 22:04:44 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-24 22:04:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:04:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-24 22:04:44 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Sep-24 22:04:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 22:04:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-24 22:04:45 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Sep-24 22:04:45 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Sep-24 22:04:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:04:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-24 22:04:45 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Sep-24 22:04:45 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Sep-24 22:04:45 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-24 22:04:45 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-24 22:04:45 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:04:45 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73352 J 2013-Sep-24 22:04:45 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:04:45 LOG2 antvel: Parameters to Doppler: Topocentric 93884 2013 267 0.0 2013-Sep-24 22:04:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:04:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-24 22:04:45 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-24 22:04:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:04:45 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:04:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:04:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:04:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Sep-24 22:04:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:04:45 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2013-Sep-24 22:04:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-24 22:04:45 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.899386 2013.733524856136 18.999933 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000005 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 1 22.993230721741490 10.035610327031021 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 2 22.995100733303811 9.941494827077902 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 3 23.001861098409499 9.905565705169513 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 4 23.006773223839392 9.964536796721410 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 5 23.004887987333422 10.058961476938878 2013-Sep-24 22:04:45 LOG4 log_alfabeam: ALFABEAM 6 22.998105933076474 10.094105282220221 2013-Sep-24 22:04:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700114 2013-Sep-24 22:04:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:04:46 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2013-Sep-24 22:04:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:04:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:04:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:04:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-24 22:04:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7487.00 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:04:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:04:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 0.902 1.096 0.906 2013-Sep-24 22:04:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.063 0.973 1.068 2013-Sep-24 22:04:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.081 0.873 0.069 2013-Sep-24 22:04:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.901 1.058 1.074 2013-Sep-24 22:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.139 (still bad) 2013-Sep-24 22:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 22:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.117 (still bad) 2013-Sep-24 22:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.123 (still bad) 2013-Sep-24 22:04:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:04:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:04:57 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2013-Sep-24 22:04:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:04:57 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2013-Sep-24 22:04:57 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Sep-24 22:04:57 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-24 22:04:57 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-24 22:04:57 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:04:57 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:04:57 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:04:57 LOG2 antvel: Parameters to Doppler: Topocentric 93897 2013 267 0.0 2013-Sep-24 22:04:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:04:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-24 22:04:57 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-24 22:04:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:04:57 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:04:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:04:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:04:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Sep-24 22:04:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:04:58 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2013-Sep-24 22:04:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-24 22:04:58 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.903007 2013.7335252680812 18.999933 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000004 9.999999999999989 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 1 22.993233669074048 10.035732324042803 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 2 22.995095896138661 9.941583660730579 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 3 23.001853269775296 9.905531845885431 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 4 23.006770301778143 9.964415220116731 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 5 23.004892826587760 10.058874152157713 2013-Sep-24 22:04:58 LOG4 log_alfabeam: ALFABEAM 6 22.998113650741026 10.094138833560001 2013-Sep-24 22:04:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700115 2013-Sep-24 22:04:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:04:58 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2013-Sep-24 22:04:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:04:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:04:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:04:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-24 22:04:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7499.00 2013-Sep-24 22:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.097 (still bad) 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.095 (still bad) 2013-Sep-24 22:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.112 (still bad) 2013-Sep-24 22:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.093 (still bad) 2013-Sep-24 22:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.112 (still bad) 2013-Sep-24 22:05:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:05:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:05:09 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2013-Sep-24 22:05:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:05:09 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2013-Sep-24 22:05:09 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Sep-24 22:05:09 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-24 22:05:09 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-24 22:05:09 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:05:09 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:05:09 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:05:09 LOG2 antvel: Parameters to Doppler: Topocentric 93909 2013 267 0.0 2013-Sep-24 22:05:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:05:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-24 22:05:09 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-24 22:05:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:05:09 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:05:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:05:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Sep-24 22:05:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:05:09 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2013-Sep-24 22:05:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-24 22:05:09 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.906350 2013.7335256483382 18.999933 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999995 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 1 22.993236413916271 10.035845518572158 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 2 22.995091412713112 9.941666196990688 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 3 23.001846000454059 9.905500543658340 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 4 23.006767580449161 9.964302414597748 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 5 23.004897312195485 10.058793015496283 2013-Sep-24 22:05:10 LOG4 log_alfabeam: ALFABEAM 6 22.998120817074987 10.094169854207825 2013-Sep-24 22:05:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700116 2013-Sep-24 22:05:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:05:10 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2013-Sep-24 22:05:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:05:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.139 (still bad) 2013-Sep-24 22:05:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-24 22:05:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7511.00 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:05:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.099 (still bad) 2013-Sep-24 22:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.138 (still bad) 2013-Sep-24 22:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.095 (still bad) 2013-Sep-24 22:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.119 (still bad) 2013-Sep-24 22:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.126 (still bad) 2013-Sep-24 22:05:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:05:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:05:21 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2013-Sep-24 22:05:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:05:21 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2013-Sep-24 22:05:21 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Sep-24 22:05:21 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-24 22:05:21 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-24 22:05:21 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:05:21 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:05:21 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:05:21 LOG2 antvel: Parameters to Doppler: Topocentric 93921 2013 267 0.0 2013-Sep-24 22:05:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:05:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-24 22:05:21 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-24 22:05:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:05:21 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:05:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:05:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Sep-24 22:05:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:05:22 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2013-Sep-24 22:05:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-24 22:05:22 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.909692 2013.7335260285954 18.999933 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000007 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 1 22.993239180997648 10.035959223302887 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 2 22.995086913661414 9.941749214178962 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 3 23.001838692984123 9.905469210954120 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 4 23.006764837050302 9.964189099601320 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 5 23.004901813675247 10.058711403825294 2013-Sep-24 22:05:22 LOG4 log_alfabeam: ALFABEAM 6 22.998128021069792 10.094200908079078 2013-Sep-24 22:05:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700117 2013-Sep-24 22:05:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:05:22 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2013-Sep-24 22:05:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:05:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:05:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-24 22:05:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7523.00 2013-Sep-24 22:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.104 (still bad) 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:05:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.122 (still bad) 2013-Sep-24 22:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.114 (still bad) 2013-Sep-24 22:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.107 (still bad) 2013-Sep-24 22:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.121 (still bad) 2013-Sep-24 22:05:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:05:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:05:33 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2013-Sep-24 22:05:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:05:33 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2013-Sep-24 22:05:33 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Sep-24 22:05:33 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-24 22:05:33 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-24 22:05:33 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:05:33 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:05:33 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:05:33 LOG2 antvel: Parameters to Doppler: Topocentric 93933 2013 267 0.0 2013-Sep-24 22:05:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:05:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-24 22:05:33 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-24 22:05:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:05:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:05:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:05:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Sep-24 22:05:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:05:33 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2013-Sep-24 22:05:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-24 22:05:34 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.913035 2013.7335264088524 18.999933 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000000 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 1 22.993241972201396 10.036073509262957 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 2 22.995082396244825 9.941832765861568 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 3 23.001831342716375 9.905437829931461 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 4 23.006762069714096 9.964075204328561 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 5 23.004906333770613 10.058629264451300 2013-Sep-24 22:05:34 LOG4 log_alfabeam: ALFABEAM 6 22.998135267309568 10.094232012896569 2013-Sep-24 22:05:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700118 2013-Sep-24 22:05:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:05:34 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2013-Sep-24 22:05:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:05:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.103 (still bad) 2013-Sep-24 22:05:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7535.00 2013-Sep-24 22:05:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:05:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.096 (still bad) 2013-Sep-24 22:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.103 (still bad) 2013-Sep-24 22:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.095 (still bad) 2013-Sep-24 22:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.117 (still bad) 2013-Sep-24 22:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.129 (still bad) 2013-Sep-24 22:05:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:05:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:05:45 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2013-Sep-24 22:05:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:05:45 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2013-Sep-24 22:05:45 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Sep-24 22:05:45 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-24 22:05:45 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-24 22:05:45 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:05:45 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:05:45 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:05:45 LOG2 antvel: Parameters to Doppler: Topocentric 93945 2013 267 0.0 2013-Sep-24 22:05:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:05:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-24 22:05:45 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-24 22:05:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:05:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:05:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:05:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Sep-24 22:05:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:05:46 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2013-Sep-24 22:05:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-24 22:05:46 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.916377 2013.7335267891094 18.999933 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 9.999999999999995 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 1 22.993244786087306 10.036188311074968 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 2 22.995077863120063 9.941916805970678 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 3 23.001823953770181 9.905406420293698 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 4 23.006759279868010 9.963960793918995 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 5 23.004910869826631 10.058546642629009 2013-Sep-24 22:05:46 LOG4 log_alfabeam: ALFABEAM 6 22.998142551734102 10.094263149171502 2013-Sep-24 22:05:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700119 2013-Sep-24 22:05:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:05:46 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2013-Sep-24 22:05:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:05:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:05:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.103 (still bad) 2013-Sep-24 22:05:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-24 22:05:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7547.00 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:05:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.095 (still bad) 2013-Sep-24 22:05:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.077 < 0.75)! 2013-Sep-24 22:05:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.976 0.887 1.099 0.879 2013-Sep-24 22:05:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.031 0.951 1.063 2013-Sep-24 22:05:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.059 0.858 0.077 2013-Sep-24 22:05:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.927 1.059 1.100 2013-Sep-24 22:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.088 (still bad) 2013-Sep-24 22:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.107 (still bad) 2013-Sep-24 22:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.114 (still bad) 2013-Sep-24 22:05:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:05:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:05:57 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2013-Sep-24 22:05:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:05:57 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2013-Sep-24 22:05:57 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Sep-24 22:05:57 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-24 22:05:57 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-24 22:05:57 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:05:57 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:05:57 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:05:57 LOG2 antvel: Parameters to Doppler: Topocentric 93957 2013 267 0.0 2013-Sep-24 22:05:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:05:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-24 22:05:57 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-24 22:05:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:05:57 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:05:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:05:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Sep-24 22:05:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:05:57 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2013-Sep-24 22:05:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-24 22:05:58 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.919720 2013.7335271693664 18.999933 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000005 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 1 22.993247624571644 10.036303700453532 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 2 22.995073311528806 9.942001388754397 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 3 23.001816521443374 9.905374964193678 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 4 23.006756465611701 9.963845796887886 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 5 23.004915424606803 10.058463484990899 2013-Sep-24 22:05:58 LOG4 log_alfabeam: ALFABEAM 6 22.998149878979927 10.094294334637295 2013-Sep-24 22:05:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700120 2013-Sep-24 22:05:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:05:58 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2013-Sep-24 22:05:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:05:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:05:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:05:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:05:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-24 22:05:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7559.00 2013-Sep-24 22:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.094 (still bad) 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.105 (still bad) 2013-Sep-24 22:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.085 (still bad) 2013-Sep-24 22:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.096 (still bad) 2013-Sep-24 22:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.097 (still bad) 2013-Sep-24 22:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.089 (still bad) 2013-Sep-24 22:06:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:06:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:06:09 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2013-Sep-24 22:06:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:06:09 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2013-Sep-24 22:06:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Sep-24 22:06:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-24 22:06:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-24 22:06:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:06:09 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2013-Sep-24 22:06:09 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:06:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-24 22:06:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:06:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:06:09 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2013-Sep-24 22:06:09 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Sep-24 22:06:09 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-24 22:06:10 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-24 22:06:10 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:06:10 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:06:10 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:06:10 LOG2 antvel: Parameters to Doppler: Topocentric 93969 2013 267 0.0 2013-Sep-24 22:06:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:06:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-24 22:06:10 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-24 22:06:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:06:10 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:06:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:06:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Sep-24 22:06:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:06:10 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Sep-24 22:06:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Sep-24 22:06:10 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.923062 2013.7335275496234 18.999933 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000012 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 1 22.993250486191041 10.036419611391093 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 2 22.995068744149062 9.942086467598287 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 3 23.001809049900118 9.905343481420470 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 4 23.006753628395636 9.963730279003499 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 5 23.004919995434690 10.058379837330527 2013-Sep-24 22:06:10 LOG4 log_alfabeam: ALFABEAM 6 22.998157244942647 10.094325549717370 2013-Sep-24 22:06:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700121 2013-Sep-24 22:06:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:06:11 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2013-Sep-24 22:06:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:06:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:06:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-24 22:06:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7572.00 2013-Sep-24 22:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.087 (still bad) 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:06:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.487 (still bad) 2013-Sep-24 22:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.084 and 1.449 (still bad) 2013-Sep-24 22:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.475 (still bad) 2013-Sep-24 22:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.477 (still bad) 2013-Sep-24 22:06:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.456 (still bad) 2013-Sep-24 22:06:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:06:22 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2013-Sep-24 22:06:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:06:22 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Sep-24 22:06:22 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Sep-24 22:06:22 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-24 22:06:22 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-24 22:06:22 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:06:22 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:06:22 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:06:22 LOG2 antvel: Parameters to Doppler: Topocentric 93982 2013 267 0.0 2013-Sep-24 22:06:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:06:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-24 22:06:22 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-24 22:06:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:06:22 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:06:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:06:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Sep-24 22:06:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:06:23 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2013-Sep-24 22:06:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Sep-24 22:06:23 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.926683 2013.7335279615686 18.999933 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000014 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 1 22.993253614049372 10.036545829996466 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 2 22.995063776064814 9.942179242120886 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 3 23.001800907513953 9.905309330801758 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 4 23.006750527185776 9.963604487187988 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 5 23.004924967552654 10.058288620803021 2013-Sep-24 22:06:23 LOG4 log_alfabeam: ALFABEAM 6 22.998165272331260 10.094359413582431 2013-Sep-24 22:06:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700122 2013-Sep-24 22:06:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:06:23 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2013-Sep-24 22:06:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:06:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:06:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-24 22:06:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7584.00 2013-Sep-24 22:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.453 (still bad) 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.101 and 1.480 (still bad) 2013-Sep-24 22:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.456 (still bad) 2013-Sep-24 22:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.480 (still bad) 2013-Sep-24 22:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.093 and 1.500 (still bad) 2013-Sep-24 22:06:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:06:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:06:34 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2013-Sep-24 22:06:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:06:34 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2013-Sep-24 22:06:34 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Sep-24 22:06:34 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-24 22:06:34 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-24 22:06:34 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:06:34 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:06:34 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:06:34 LOG2 antvel: Parameters to Doppler: Topocentric 93994 2013 267 0.0 2013-Sep-24 22:06:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:06:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-24 22:06:34 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-24 22:06:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:06:34 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:06:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:06:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Sep-24 22:06:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:06:34 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2013-Sep-24 22:06:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Sep-24 22:06:35 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.930026 2013.7335283418258 18.999933 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999995 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 1 22.993256527272486 10.036662944235504 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 2 22.995059171435976 9.942265445882191 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 3 23.001793346460264 9.905277766622387 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 4 23.006747638758846 9.963487767819743 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 5 23.004929576184221 10.058203862227039 2013-Sep-24 22:06:35 LOG4 log_alfabeam: ALFABEAM 6 22.998172726656293 10.094390716114647 2013-Sep-24 22:06:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700123 2013-Sep-24 22:06:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:06:35 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2013-Sep-24 22:06:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:06:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.459 (still bad) 2013-Sep-24 22:06:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-24 22:06:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7596.00 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:06:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.459 (still bad) 2013-Sep-24 22:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.463 (still bad) 2013-Sep-24 22:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.446 (still bad) 2013-Sep-24 22:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.464 (still bad) 2013-Sep-24 22:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.489 (still bad) 2013-Sep-24 22:06:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:06:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:06:46 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2013-Sep-24 22:06:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:06:46 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2013-Sep-24 22:06:46 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Sep-24 22:06:46 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-24 22:06:46 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-24 22:06:46 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:06:46 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:06:46 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:06:46 LOG2 antvel: Parameters to Doppler: Topocentric 94006 2013 267 0.0 2013-Sep-24 22:06:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:06:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-24 22:06:46 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-24 22:06:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:06:46 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:06:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:06:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Sep-24 22:06:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:06:47 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2013-Sep-24 22:06:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Sep-24 22:06:47 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.933368 2013.7335287220828 18.999933 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 9.999999999999998 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 1 22.993259464348846 10.036780588942014 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 2 22.995054550898480 9.942352157743215 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 3 23.001785745344215 9.905246178926605 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 4 23.006744726658759 9.963370518674083 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 5 23.004934200994413 10.058118601681707 2013-Sep-24 22:06:47 LOG4 log_alfabeam: ALFABEAM 6 22.998180220535001 10.094422045262350 2013-Sep-24 22:06:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700124 2013-Sep-24 22:06:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:06:47 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2013-Sep-24 22:06:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:06:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:06:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.448 (still bad) 2013-Sep-24 22:06:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-24 22:06:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7608.00 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.448 (still bad) 2013-Sep-24 22:06:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2013-Sep-24 22:06:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.320 1.172 1.454 1.152 2013-Sep-24 22:06:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.437 1.401 1.285 1.387 2013-Sep-24 22:06:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.371 1.420 1.135 0.090 2013-Sep-24 22:06:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.306 1.225 1.418 1.450 2013-Sep-24 22:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.437 (still bad) 2013-Sep-24 22:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.453 (still bad) 2013-Sep-24 22:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.483 (still bad) 2013-Sep-24 22:06:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:06:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:06:58 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2013-Sep-24 22:06:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:06:58 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2013-Sep-24 22:06:58 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Sep-24 22:06:58 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-24 22:06:58 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-24 22:06:58 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:06:58 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:06:58 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:06:58 LOG2 antvel: Parameters to Doppler: Topocentric 94017 2013 267 0.0 2013-Sep-24 22:06:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:06:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-24 22:06:58 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-24 22:06:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:06:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:06:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:06:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Sep-24 22:06:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:06:58 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2013-Sep-24 22:06:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Sep-24 22:06:59 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.936432 2013.7335290706517 18.999933 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999998 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 1 22.993262179039963 10.036888946982049 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 2 22.995050299490948 9.942432129168376 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 3 23.001778739084475 9.905217190760498 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 4 23.006742035032406 9.963262523996171 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 5 23.004938456560588 10.058039966639313 2013-Sep-24 22:06:59 LOG4 log_alfabeam: ALFABEAM 6 22.998187128000165 10.094450799087056 2013-Sep-24 22:06:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700125 2013-Sep-24 22:06:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:06:59 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2013-Sep-24 22:06:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:06:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:06:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:06:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-24 22:06:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7620.00 2013-Sep-24 22:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.444 (still bad) 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:07:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.475 (still bad) 2013-Sep-24 22:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.433 (still bad) 2013-Sep-24 22:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.454 (still bad) 2013-Sep-24 22:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.459 (still bad) 2013-Sep-24 22:07:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:07:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:07:10 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2013-Sep-24 22:07:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:07:10 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2013-Sep-24 22:07:10 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Sep-24 22:07:10 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-24 22:07:10 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-24 22:07:10 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:07:10 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:07:10 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:07:10 LOG2 antvel: Parameters to Doppler: Topocentric 94030 2013 267 0.0 2013-Sep-24 22:07:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:07:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-24 22:07:10 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-24 22:07:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:07:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:07:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:07:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Sep-24 22:07:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:07:11 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2013-Sep-24 22:07:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Sep-24 22:07:11 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.940053 2013.7335294825969 18.999933 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000009 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 1 22.993265414547253 10.037017622590376 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 2 22.995045256405582 9.942527225813425 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 3 23.001770412684809 9.905182899452916 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 4 23.006738826989462 9.963134278669386 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 5 23.004943504862251 10.057946456494927 2013-Sep-24 22:07:11 LOG4 log_alfabeam: ALFABEAM 6 22.998195337053065 10.094484816841037 2013-Sep-24 22:07:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700126 2013-Sep-24 22:07:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:07:11 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2013-Sep-24 22:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.444 (still bad) 2013-Sep-24 22:07:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:07:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:07:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-24 22:07:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7632.00 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.473 (still bad) 2013-Sep-24 22:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.443 (still bad) 2013-Sep-24 22:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.092 and 1.454 (still bad) 2013-Sep-24 22:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.451 (still bad) 2013-Sep-24 22:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.440 (still bad) 2013-Sep-24 22:07:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:07:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:07:22 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2013-Sep-24 22:07:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:07:22 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2013-Sep-24 22:07:22 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Sep-24 22:07:22 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-24 22:07:22 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-24 22:07:22 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:07:22 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:07:22 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:07:22 LOG2 antvel: Parameters to Doppler: Topocentric 94042 2013 267 0.0 2013-Sep-24 22:07:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:07:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-24 22:07:22 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-24 22:07:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:07:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:07:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:07:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Sep-24 22:07:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:07:22 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Sep-24 22:07:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Sep-24 22:07:23 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.943395 2013.7335298628539 18.999933 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000014 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 1 22.993268427278672 10.037136982292211 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 2 22.995040583755824 9.942615564217405 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 3 23.001762682845648 9.905151219324198 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 4 23.006735839806634 9.963015316920693 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 5 23.004948182620275 10.057859589285451 2013-Sep-24 22:07:23 LOG4 log_alfabeam: ALFABEAM 6 22.998202958014232 10.094516247808397 2013-Sep-24 22:07:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700127 2013-Sep-24 22:07:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:07:23 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2013-Sep-24 22:07:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:07:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:07:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7644.00 2013-Sep-24 22:07:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-24 22:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.439 (still bad) 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:07:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.090 and 1.441 (still bad) 2013-Sep-24 22:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.423 (still bad) 2013-Sep-24 22:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.436 (still bad) 2013-Sep-24 22:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.091 and 1.443 (still bad) 2013-Sep-24 22:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.434 (still bad) 2013-Sep-24 22:07:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:07:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:07:34 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2013-Sep-24 22:07:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:07:34 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Sep-24 22:07:34 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2013-Sep-24 22:07:34 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2013-Sep-24 22:07:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Sep-24 22:07:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:07:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:07:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:07:34 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Sep-24 22:07:34 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:07:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:07:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:07:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:07:35 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Sep-24 22:07:35 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Sep-24 22:07:35 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Sep-24 22:07:35 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-24 22:07:35 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-24 22:07:35 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:07:35 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:07:35 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:07:35 LOG2 antvel: Parameters to Doppler: Topocentric 94054 2013 267 0.0 2013-Sep-24 22:07:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:07:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-24 22:07:35 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-24 22:07:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:07:35 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:07:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:07:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Sep-24 22:07:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:07:35 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2013-Sep-24 22:07:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-24 22:07:35 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.946738 2013.7335302431111 18.999933 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 10.000000000000005 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 1 22.993271466643041 10.037256955818430 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 2 22.995035892247252 9.942704479873319 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 3 23.001754907177443 9.905119501116980 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 4 23.006732826192689 9.962895742253185 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 5 23.004952879524822 10.057772151956863 2013-Sep-24 22:07:35 LOG4 log_alfabeam: ALFABEAM 6 22.998210624218430 10.094547720020625 2013-Sep-24 22:07:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700128 2013-Sep-24 22:07:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:07:36 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2013-Sep-24 22:07:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:07:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:07:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Sep-24 22:07:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7657.00 2013-Sep-24 22:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.434 (still bad) 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:07:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.072 (still bad) 2013-Sep-24 22:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.099 (still bad) 2013-Sep-24 22:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.100 (still bad) 2013-Sep-24 22:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.086 (still bad) 2013-Sep-24 22:07:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.075 (still bad) 2013-Sep-24 22:07:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:07:47 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2013-Sep-24 22:07:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:07:47 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2013-Sep-24 22:07:47 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Sep-24 22:07:47 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-24 22:07:47 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-24 22:07:47 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:07:47 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:07:47 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:07:47 LOG2 antvel: Parameters to Doppler: Topocentric 94067 2013 267 0.0 2013-Sep-24 22:07:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:07:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-24 22:07:47 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-24 22:07:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:07:47 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:07:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:07:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Sep-24 22:07:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:07:48 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Sep-24 22:07:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-24 22:07:48 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.950359 2013.7335306550563 18.999933 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 10.000000000000009 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 1 22.993274788089821 10.037387562171778 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 2 22.995030790848752 9.942801416150179 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 3 23.001746435443074 9.905085114324921 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 4 23.006729532858767 9.962765568807752 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 5 23.004957987095359 10.057676824532248 2013-Sep-24 22:07:48 LOG4 log_alfabeam: ALFABEAM 6 22.998218976757716 10.094581844083876 2013-Sep-24 22:07:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700129 2013-Sep-24 22:07:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:07:48 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2013-Sep-24 22:07:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:07:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:07:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:07:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Sep-24 22:07:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7669.00 2013-Sep-24 22:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.075 (still bad) 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:07:50 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.080 (still bad) 2013-Sep-24 22:07:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.079 < 0.75)! 2013-Sep-24 22:07:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.975 0.895 1.109 0.888 2013-Sep-24 22:07:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.034 0.962 1.057 2013-Sep-24 22:07:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.056 0.857 0.079 2013-Sep-24 22:07:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.976 0.920 1.057 1.091 2013-Sep-24 22:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.116 (still bad) 2013-Sep-24 22:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.099 (still bad) 2013-Sep-24 22:07:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:07:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:07:59 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2013-Sep-24 22:07:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:07:59 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Sep-24 22:07:59 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Sep-24 22:07:59 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-24 22:07:59 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-24 22:07:59 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:07:59 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:07:59 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:07:59 LOG2 antvel: Parameters to Doppler: Topocentric 94079 2013 267 0.0 2013-Sep-24 22:07:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:07:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-24 22:07:59 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-24 22:07:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:07:59 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:07:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:07:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:07:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Sep-24 22:07:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:07:59 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Sep-24 22:08:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-24 22:08:00 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.953701 2013.7335310353133 18.999933 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000007 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 1 22.993277880963873 10.037508713957633 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 2 22.995026064247337 9.942891466209165 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 3 23.001738570502351 9.905053349763881 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 4 23.006726466137319 9.962644817380029 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 5 23.004962719699499 10.057588266400009 2013-Sep-24 22:08:00 LOG4 log_alfabeam: ALFABEAM 6 22.998226731104289 10.094613369656692 2013-Sep-24 22:08:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700130 2013-Sep-24 22:08:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:08:00 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Sep-24 22:08:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:08:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.090 (still bad) 2013-Sep-24 22:08:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Sep-24 22:08:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7681.00 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:08:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.090 (still bad) 2013-Sep-24 22:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.088 (still bad) 2013-Sep-24 22:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.111 (still bad) 2013-Sep-24 22:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.116 (still bad) 2013-Sep-24 22:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.098 (still bad) 2013-Sep-24 22:08:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:08:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:08:11 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Sep-24 22:08:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:08:11 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Sep-24 22:08:11 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Sep-24 22:08:11 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-24 22:08:11 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-24 22:08:11 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:08:11 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:08:11 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:08:11 LOG2 antvel: Parameters to Doppler: Topocentric 94090 2013 267 0.0 2013-Sep-24 22:08:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:08:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-24 22:08:11 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-24 22:08:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:08:11 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:08:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:08:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Sep-24 22:08:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:08:11 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2013-Sep-24 22:08:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-24 22:08:11 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.956765 2013.7335313838821 18.999933 2013-Sep-24 22:08:11 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000000 9.999999999999995 2013-Sep-24 22:08:11 LOG4 log_alfabeam: ALFABEAM 1 22.993280739858033 10.037620304119766 2013-Sep-24 22:08:11 LOG4 log_alfabeam: ALFABEAM 2 22.995021715378314 9.942974520960123 2013-Sep-24 22:08:11 LOG4 log_alfabeam: ALFABEAM 3 23.001731320764073 9.905024205532751 2013-Sep-24 22:08:11 LOG4 log_alfabeam: ALFABEAM 4 23.006723631395420 9.962533594947091 2013-Sep-24 22:08:12 LOG4 log_alfabeam: ALFABEAM 5 23.004967074333713 10.057506585435876 2013-Sep-24 22:08:12 LOG4 log_alfabeam: ALFABEAM 6 22.998233878953378 10.094642297780640 2013-Sep-24 22:08:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700131 2013-Sep-24 22:08:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:08:12 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2013-Sep-24 22:08:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:08:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:08:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Sep-24 22:08:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7693.00 2013-Sep-24 22:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.089 (still bad) 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.106 (still bad) 2013-Sep-24 22:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.090 (still bad) 2013-Sep-24 22:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.106 (still bad) 2013-Sep-24 22:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.125 (still bad) 2013-Sep-24 22:08:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:08:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:08:23 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2013-Sep-24 22:08:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:08:23 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2013-Sep-24 22:08:23 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Sep-24 22:08:23 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-24 22:08:23 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-24 22:08:23 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:08:23 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:08:23 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:08:23 LOG2 antvel: Parameters to Doppler: Topocentric 94103 2013 267 0.0 2013-Sep-24 22:08:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:08:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-24 22:08:23 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-24 22:08:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:08:23 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:08:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:08:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Sep-24 22:08:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:08:24 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2013-Sep-24 22:08:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-24 22:08:24 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.960386 2013.7335317958273 18.999933 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999993 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 1 22.993284147485213 10.037752820196648 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 2 22.995016556846121 9.943073289828387 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 3 23.001722704636158 9.904989737454470 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 4 23.006720252528986 9.962401514272877 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 5 23.004972240006321 10.057409447483076 2013-Sep-24 22:08:24 LOG4 log_alfabeam: ALFABEAM 6 22.998242374056250 10.094676514231397 2013-Sep-24 22:08:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700132 2013-Sep-24 22:08:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:08:24 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Sep-24 22:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.093 (still bad) 2013-Sep-24 22:08:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:08:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:08:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Sep-24 22:08:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7705.00 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.079 (still bad) 2013-Sep-24 22:08:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.070 (still bad) 2013-Sep-24 22:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.091 (still bad) 2013-Sep-24 22:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.088 (still bad) 2013-Sep-24 22:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.077 (still bad) 2013-Sep-24 22:08:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:08:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:08:35 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Sep-24 22:08:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:08:35 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2013-Sep-24 22:08:35 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Sep-24 22:08:35 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-24 22:08:35 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-24 22:08:35 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:08:35 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:08:35 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:08:35 LOG2 antvel: Parameters to Doppler: Topocentric 94115 2013 267 0.0 2013-Sep-24 22:08:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:08:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-24 22:08:35 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-24 22:08:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:08:35 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:08:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:08:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Sep-24 22:08:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:08:35 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2013-Sep-24 22:08:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-24 22:08:35 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.963729 2013.7335321760843 18.999933 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999998 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 1 22.993287321683013 10.037875781400356 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 2 22.995011775958151 9.943165072580769 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 3 23.001714703066291 9.904957892168609 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 4 23.006717105095216 9.962278955830145 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 5 23.004977027805399 10.057319177574414 2013-Sep-24 22:08:36 LOG4 log_alfabeam: ALFABEAM 6 22.998250263299244 10.094708130892414 2013-Sep-24 22:08:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700133 2013-Sep-24 22:08:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:08:36 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2013-Sep-24 22:08:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:08:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:08:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Sep-24 22:08:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7717.00 2013-Sep-24 22:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.065 (still bad) 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:08:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.083 (still bad) 2013-Sep-24 22:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.065 (still bad) 2013-Sep-24 22:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.086 (still bad) 2013-Sep-24 22:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.087 (still bad) 2013-Sep-24 22:08:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.065 (still bad) 2013-Sep-24 22:08:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:08:47 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2013-Sep-24 22:08:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:08:47 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2013-Sep-24 22:08:47 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Sep-24 22:08:47 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-24 22:08:47 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-24 22:08:47 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:08:47 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:08:47 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:08:47 LOG2 antvel: Parameters to Doppler: Topocentric 94127 2013 267 0.0 2013-Sep-24 22:08:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:08:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-24 22:08:47 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-24 22:08:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:08:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:08:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:08:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Sep-24 22:08:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:08:48 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Sep-24 22:08:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-24 22:08:48 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.967071 2013.7335325563415 18.999933 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 0 23.000000000000004 10.000000000000000 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 1 22.993290522262090 10.037999303120840 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 2 22.995006978804966 9.943257405207186 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 3 23.001706658523311 9.904926035194649 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 4 23.006713931476828 9.962155837497313 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 5 23.004981832177855 10.057228364224690 2013-Sep-24 22:08:48 LOG4 log_alfabeam: ALFABEAM 6 22.998258194976092 10.094739762908068 2013-Sep-24 22:08:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700134 2013-Sep-24 22:08:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:08:48 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2013-Sep-24 22:08:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:08:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:08:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:08:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:08:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Sep-24 22:08:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7729.00 2013-Sep-24 22:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.063 (still bad) 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:08:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.058 (still bad) 2013-Sep-24 22:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.073 (still bad) 2013-Sep-24 22:08:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.075 < 0.75)! 2013-Sep-24 22:08:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.945 0.865 1.050 0.855 2013-Sep-24 22:08:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.057 0.998 0.927 1.023 2013-Sep-24 22:08:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.994 1.011 0.831 0.075 2013-Sep-24 22:08:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.901 1.015 1.068 2013-Sep-24 22:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.059 (still bad) 2013-Sep-24 22:08:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:08:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:08:59 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2013-Sep-24 22:08:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:08:59 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Sep-24 22:08:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Sep-24 22:08:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-24 22:08:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-24 22:08:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:08:59 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2013-Sep-24 22:08:59 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.044 (still bad) 2013-Sep-24 22:08:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-24 22:08:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:08:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:08:59 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2013-Sep-24 22:08:59 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Sep-24 22:08:59 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-24 22:08:59 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Sep-24 22:08:59 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:08:59 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:08:59 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:09:00 LOG2 antvel: Parameters to Doppler: Topocentric 94139 2013 267 0.0 2013-Sep-24 22:09:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:09:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Sep-24 22:09:00 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Sep-24 22:09:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:09:00 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:09:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:09:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Sep-24 22:09:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:09:00 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2013-Sep-24 22:09:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Sep-24 22:09:00 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.970414 2013.7335329365985 18.999933 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000005 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 1 22.993293751412622 10.038123462513898 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 2 22.995002162478574 9.943350347489986 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 3 23.001698565878208 9.904894148771207 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 4 23.006710729501549 9.962032082352925 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 5 23.004986656040142 10.057136948592808 2013-Sep-24 22:09:00 LOG4 log_alfabeam: ALFABEAM 6 22.998266174144995 10.094771427967101 2013-Sep-24 22:09:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700135 2013-Sep-24 22:09:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:09:00 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2013-Sep-24 22:09:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:09:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Sep-24 22:09:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Sep-24 22:09:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7741.00 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:09:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.441 (still bad) 2013-Sep-24 22:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.402 (still bad) 2013-Sep-24 22:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.084 and 1.413 (still bad) 2013-Sep-24 22:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.457 (still bad) 2013-Sep-24 22:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.418 (still bad) 2013-Sep-24 22:09:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:09:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:09:11 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2013-Sep-24 22:09:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:09:11 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2013-Sep-24 22:09:11 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Sep-24 22:09:11 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-24 22:09:11 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Sep-24 22:09:11 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:09:11 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:09:11 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:09:11 LOG2 antvel: Parameters to Doppler: Topocentric 94151 2013 267 0.0 2013-Sep-24 22:09:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:09:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Sep-24 22:09:11 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Sep-24 22:09:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:09:11 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:09:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:09:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Sep-24 22:09:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:09:12 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2013-Sep-24 22:09:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Sep-24 22:09:12 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.973756 2013.7335333168555 18.999933 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 10.000000000000002 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 1 22.993297007480521 10.038248188546973 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 2 22.994997329823992 9.943443848390093 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 3 23.001690429655461 9.904862253304099 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 4 23.006707500809050 9.961907761180244 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 5 23.004991496546953 10.057044980836412 2013-Sep-24 22:09:12 LOG4 log_alfabeam: ALFABEAM 6 22.998274196346092 10.094803105858809 2013-Sep-24 22:09:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700136 2013-Sep-24 22:09:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:09:12 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Sep-24 22:09:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:09:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Sep-24 22:09:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Sep-24 22:09:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7753.00 2013-Sep-24 22:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.407 (still bad) 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:09:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.418 (still bad) 2013-Sep-24 22:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.433 (still bad) 2013-Sep-24 22:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.439 (still bad) 2013-Sep-24 22:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.420 (still bad) 2013-Sep-24 22:09:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:09:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:09:23 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Sep-24 22:09:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:09:23 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2013-Sep-24 22:09:23 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Sep-24 22:09:23 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-24 22:09:23 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Sep-24 22:09:23 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:09:23 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:09:23 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:09:23 LOG2 antvel: Parameters to Doppler: Topocentric 94163 2013 267 0.0 2013-Sep-24 22:09:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:09:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Sep-24 22:09:23 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Sep-24 22:09:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:09:23 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:09:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:09:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Sep-24 22:09:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:09:23 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2013-Sep-24 22:09:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Sep-24 22:09:24 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.977098 2013.7335336971125 18.999933 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000005 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 1 22.993300291708401 10.038373521531321 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 2 22.994992479367443 9.943537940227074 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 3 23.001682247121781 9.904830340614126 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 4 23.006704244166606 9.961782833781381 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 5 23.004996355178537 10.056952429123596 2013-Sep-24 22:09:24 LOG4 log_alfabeam: ALFABEAM 6 22.998282264275581 10.094834804759410 2013-Sep-24 22:09:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700137 2013-Sep-24 22:09:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:09:24 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2013-Sep-24 22:09:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:09:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Sep-24 22:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.410 (still bad) 2013-Sep-24 22:09:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Sep-24 22:09:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7765.00 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:09:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.434 (still bad) 2013-Sep-24 22:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.420 (still bad) 2013-Sep-24 22:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.443 (still bad) 2013-Sep-24 22:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.473 (still bad) 2013-Sep-24 22:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.426 (still bad) 2013-Sep-24 22:09:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:09:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:09:35 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2013-Sep-24 22:09:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:09:35 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2013-Sep-24 22:09:35 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Sep-24 22:09:35 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-24 22:09:35 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Sep-24 22:09:35 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:09:35 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:09:35 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:09:35 LOG2 antvel: Parameters to Doppler: Topocentric 94175 2013 267 0.0 2013-Sep-24 22:09:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:09:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Sep-24 22:09:35 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Sep-24 22:09:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:09:35 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:09:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:09:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Sep-24 22:09:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:09:36 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2013-Sep-24 22:09:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Sep-24 22:09:36 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.980441 2013.7335340773695 18.999933 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999989 10.000000000000005 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 1 22.993303605375758 10.038499502518462 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 2 22.994987609614604 9.943632656068871 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 3 23.001674015485971 9.904798402528865 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 4 23.006700958304926 9.961657259218619 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 5 23.005001233436126 10.056859260882224 2013-Sep-24 22:09:36 LOG4 log_alfabeam: ALFABEAM 6 22.998290380686779 10.094866532843589 2013-Sep-24 22:09:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700138 2013-Sep-24 22:09:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:09:36 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2013-Sep-24 22:09:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:09:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Sep-24 22:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.413 (still bad) 2013-Sep-24 22:09:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Sep-24 22:09:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7777.00 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:09:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.435 (still bad) 2013-Sep-24 22:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.412 (still bad) 2013-Sep-24 22:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.432 (still bad) 2013-Sep-24 22:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.465 (still bad) 2013-Sep-24 22:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.419 (still bad) 2013-Sep-24 22:09:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:09:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:09:47 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2013-Sep-24 22:09:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:09:47 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2013-Sep-24 22:09:47 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Sep-24 22:09:47 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-24 22:09:47 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Sep-24 22:09:47 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:09:47 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:09:47 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:09:47 LOG2 antvel: Parameters to Doppler: Topocentric 94187 2013 267 0.0 2013-Sep-24 22:09:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:09:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Sep-24 22:09:47 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Sep-24 22:09:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:09:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:09:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:09:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Sep-24 22:09:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:09:47 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2013-Sep-24 22:09:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Sep-24 22:09:48 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.983783 2013.7335344576268 18.999933 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 9.999999999999996 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 1 22.993306946787346 10.038626059428090 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 2 22.994982723444672 9.943727943938867 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 3 23.001665739348404 9.904766459567735 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 4 23.006697644904456 9.961531109321133 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 5 23.005006128439781 10.056765527194942 2013-Sep-24 22:09:48 LOG4 log_alfabeam: ALFABEAM 6 22.998298541044957 10.094898269783060 2013-Sep-24 22:09:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700139 2013-Sep-24 22:09:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:09:48 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2013-Sep-24 22:09:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:09:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Sep-24 22:09:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:09:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:09:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Sep-24 22:09:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7789.00 2013-Sep-24 22:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.409 (still bad) 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:09:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.416 (still bad) 2013-Sep-24 22:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.408 (still bad) 2013-Sep-24 22:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.419 (still bad) 2013-Sep-24 22:09:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.090 < 0.75)! 2013-Sep-24 22:09:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.288 1.136 1.436 1.115 2013-Sep-24 22:09:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.422 1.367 1.262 1.368 2013-Sep-24 22:09:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.335 1.385 1.132 0.090 2013-Sep-24 22:09:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.316 1.202 1.438 1.429 2013-Sep-24 22:09:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.411 (still bad) 2013-Sep-24 22:09:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:09:59 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2013-Sep-24 22:09:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:09:59 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2013-Sep-24 22:09:59 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Sep-24 22:09:59 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-24 22:09:59 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Sep-24 22:09:59 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:09:59 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73353 J 2013-Sep-24 22:09:59 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:09:59 LOG2 antvel: Parameters to Doppler: Topocentric 94199 2013 267 0.0 2013-Sep-24 22:09:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:09:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Sep-24 22:09:59 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Sep-24 22:09:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:09:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:09:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:10:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Sep-24 22:10:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:10:00 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Sep-24 22:10:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Sep-24 22:10:00 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.987126 2013.7335348378838 18.999933 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999986 9.999999999999998 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 1 22.993310318233377 10.038753271302182 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 2 22.994977817900104 9.943823865593769 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 3 23.001657413429349 9.904734494055660 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 4 23.006694301693621 9.961404305282288 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 5 23.005011043156756 10.056671167266952 2013-Sep-24 22:10:00 LOG4 log_alfabeam: ALFABEAM 6 22.998306750557248 10.094930033196102 2013-Sep-24 22:10:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700140 2013-Sep-24 22:10:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:10:00 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2013-Sep-24 22:10:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:10:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Sep-24 22:10:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Sep-24 22:10:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7801.00 2013-Sep-24 22:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.405 (still bad) 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:10:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.410 (still bad) 2013-Sep-24 22:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.404 (still bad) 2013-Sep-24 22:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.421 (still bad) 2013-Sep-24 22:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.089 and 1.436 (still bad) 2013-Sep-24 22:10:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:10:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:10:11 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2013-Sep-24 22:10:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:10:11 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Sep-24 22:10:11 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Sep-24 22:10:11 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-24 22:10:11 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Sep-24 22:10:11 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:10:11 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73354 J 2013-Sep-24 22:10:11 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:10:11 LOG2 antvel: Parameters to Doppler: Topocentric 94211 2013 267 0.0 2013-Sep-24 22:10:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:10:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Sep-24 22:10:11 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Sep-24 22:10:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:10:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:10:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:10:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Sep-24 22:10:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Sep-24 22:10:11 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2013-Sep-24 22:10:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Sep-24 22:10:12 LOG5 log_alfabeam: Parameters: 23.0 10.0 21.990468 2013.7335352181408 18.999933 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 0 22.999999999999993 10.000000000000000 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 1 22.993313717990535 10.038881065351346 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 2 22.994972895883137 9.943920368419592 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 3 23.001649042380670 9.904702526585922 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 4 23.006690930380731 9.961276919638975 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 5 23.005015974683811 10.056576232809656 2013-Sep-24 22:10:12 LOG4 log_alfabeam: ALFABEAM 6 22.998315004638147 10.094961802677703 2013-Sep-24 22:10:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 326700141 2013-Sep-24 22:10:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Sep-24 22:10:12 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2013-Sep-24 22:10:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:10:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Sep-24 22:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.412 (still bad) 2013-Sep-24 22:10:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Sep-24 22:10:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7813.00 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:10:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.402 (still bad) 2013-Sep-24 22:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.400 (still bad) 2013-Sep-24 22:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.087 and 1.419 (still bad) 2013-Sep-24 22:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.427 (still bad) 2013-Sep-24 22:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.088 and 1.406 (still bad) 2013-Sep-24 22:10:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:10:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Sep-24 22:10:23 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2013-Sep-24 22:10:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Sep-24 22:10:23 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2013-Sep-24 22:10:23 INFO2 smartfreq: Switching off CAL 2013-Sep-24 22:10:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:10:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:10:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:10:23 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2013-Sep-24 22:10:23 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:10:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:10:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:10:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:10:23 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2013-Sep-24 22:10:23 INFO3 restore_frequencies: Restoring original frequencies 2013-Sep-24 22:10:23 LOG5 antvel: Calling 'antvel 230000.000000 100000.000000 J Topocentric 0' 2013-Sep-24 22:10:23 LOG2 antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73354 J 2013-Sep-24 22:10:23 LOG2 antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:10:24 LOG2 antvel: Parameters to Doppler: Topocentric 94223 2013 267 0.0 2013-Sep-24 22:10:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:10:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Sep-24 22:10:24 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Sep-24 22:10:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:10:24 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:10:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-24 22:10:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:24 STOP finish_task: Finishing task 'smart frequency switching' 2013-Sep-24 22:10:24 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Sep-24 22:10:24 DONE finish_task: DONE finished pattern: smart frequency switching 2013-Sep-24 22:10:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:10:24 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2013-Sep-24 22:10:24 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Sep-24 22:10:24 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock_cima33.conf' 2013-Sep-24 22:10:24 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Sep-24 22:10:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:10:24 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Sep-24 22:10:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Sep-24 22:10:24 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2013-Sep-24 22:10:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2013-Sep-24 22:10:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:24 LOG1 CIMA-check_alfa_biasmon: Current ALFA Bias monitering Status is : OFF 2013-Sep-24 22:10:24 LOG2 CIMA-antvel: Precessing RA = 23:00:00.0 Dec = +10:00:00.0 Epoch = 2013.73354 J 2013-Sep-24 22:10:24 LOG2 CIMA-antvel: Computed apparent RA = 23:00:43.3 Dec = +10:04:40.9 2013-Sep-24 22:10:24 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 94224 2013 267 0.0 2013-Sep-24 22:10:24 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Sep-24 22:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.086 and 1.399 (still bad) 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Sep-24 22:10:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2013-Sep-24 22:10:26 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift0) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift1) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift2) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift3) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift4) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift5) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pshift6) "radar" 2013-Sep-24 22:10:27 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift0) "radar" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift1) "radar" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift2) "radar" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift3) "radar" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift4) "radar" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2013-Sep-24 22:10:28 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift5) "radar" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pshift6) "radar" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2013-Sep-24 22:10:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:10:29 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Sep-24 22:10:29 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2013-Sep-24 22:10:29 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Sep-24 22:10:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Sep-24 22:10:29 LOG1 config_iflo: Receiver ALFA already selected 2013-Sep-24 22:10:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:10:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:10:29 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:10:29 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Sep-24 22:10:29 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:10:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:10:29 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Sep-24 22:10:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:10:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:10:29 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Sep-24 22:10:29 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Sep-24 22:10:29 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Sep-24 22:10:29 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Sep-24 22:10:29 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Sep-24 22:10:29 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Sep-24 22:10:29 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Sep-24 22:10:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Sep-24 22:10:29 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Sep-24 22:10:30 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Sep-24 22:10:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Sep-24 22:10:30 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Sep-24 22:10:30 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Sep-24 22:10:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Sep-24 22:10:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:10:30 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Sep-24 22:10:30 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:10:30 LOG4 got_cormsg: From DATATAKING: vw% DONE 2013-Sep-24 22:10:30 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Sep-24 22:10:30 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2013-Sep-24 22:10:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Sep-24 22:10:30 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Sep-24 22:10:30 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2013-Sep-24 22:10:30 DONE finish_task: DONE finished configuration: IF/LO path 2013-Sep-24 22:10:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:10:30 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Sep-24 22:10:30 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2013-Sep-24 22:10:30 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Sep-24 22:10:30 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Sep-24 22:10:31 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Sep-24 22:10:31 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Sep-24 22:10:31 START begin_task: Starting task 'selecting calibration port' 2013-Sep-24 22:10:31 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG3 vw_send: To DATATAKING: calport 3 2013-Sep-24 22:10:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Sep-24 22:10:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:10:31 START begin_task: Starting task 'waiting on calport' 2013-Sep-24 22:10:31 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:31 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Sep-24 22:10:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:31 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:10:31 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Sep-24 22:10:31 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Sep-24 22:10:31 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Sep-24 22:10:31 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:10:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:10:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:10:31 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:10:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:10:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:10:31 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2013-Sep-24 22:10:31 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:10:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:10:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Sep-24 22:10:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Sep-24 22:10:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:10:32 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Sep-24 22:10:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Sep-24 22:10:32 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:10:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Sep-24 22:10:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:10:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 22:10:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:10:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:10:32 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Sep-24 22:10:32 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Sep-24 22:10:32 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Sep-24 22:10:32 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2013-Sep-24 22:10:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Sep-24 22:10:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:10:32 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Sep-24 22:10:32 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2013-Sep-24 22:10:32 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2013-Sep-24 22:10:32 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2013-Sep-24 22:10:33 INFO1 config_mock: Starting to configure the Mock spectrometer 2013-Sep-24 22:10:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Sep-24 22:10:33 START begin_task: Starting task 'selecting calibration port' 2013-Sep-24 22:10:33 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 LOG3 vw_send: To DATATAKING: calport 3 2013-Sep-24 22:10:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Sep-24 22:10:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:10:33 START begin_task: Starting task 'waiting on calport' 2013-Sep-24 22:10:33 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Sep-24 22:10:33 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Sep-24 22:10:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:10:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:33 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:10:33 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Sep-24 22:10:33 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Sep-24 22:10:33 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Sep-24 22:10:33 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:10:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:10:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:10:33 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:10:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:10:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:10:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:10:33 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2013-Sep-24 22:10:33 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Sep-24 22:10:33 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Sep-24 22:10:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:10:34 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2013-Sep-24 22:10:34 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:10:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:10:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:10:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:10:34 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2013-Sep-24 22:10:34 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2013-Sep-24 22:10:34 LOG3 socket_wait: To MOCK: NOP 2013-Sep-24 22:10:34 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2013-Sep-24 22:10:34 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2013-Sep-24 22:10:35 ALERT got_mock_message: Mock spectrometer restarting 2013-Sep-24 22:10:35 LOG4 from_mock: From MOCK: nop ok 2013-Sep-24 22:10:35 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2013-Sep-24 22:10:35 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2013-Sep-24 22:10:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pshift=0 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2013-Sep-24 22:10:35 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2013-Sep-24 22:10:35 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2013-Sep-24 22:10:35 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:pshift=0:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2013-Sep-24 22:10:35 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2013-Sep-24 22:10:35 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Sep-24 22:10:36 LOG4 from_mock: From MOCK: confok 2013-Sep-24 22:10:36 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2013-Sep-24 22:10:36 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Sep-24 22:10:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2013-Sep-24 22:10:36 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2013-Sep-24 22:10:36 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2013-Sep-24 22:10:36 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2013-Sep-24 22:10:36 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Sep-24 22:10:36 LOG4 from_mock: From MOCK: confok 2013-Sep-24 22:10:36 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2013-Sep-24 22:10:36 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Sep-24 22:10:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2013-Sep-24 22:10:36 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2013-Sep-24 22:10:36 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2013-Sep-24 22:10:36 DONE finish_task: DONE finished configuring: the Mock spectrometer 2013-Sep-24 22:10:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:10:36 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2013-Sep-24 22:10:36 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2013-Sep-24 22:10:36 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Sep-24 22:10:36 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2013-Sep-24 22:10:36 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2013-Sep-24 22:10:36 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Sep-24 22:10:36 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES7619_p1_033) < 222143 THEN' 2013-Sep-24 22:10:38 LOG3 is_if_valid: Current source data: up 295.0 19.3 UP - - 143 1.0 2013-Sep-24 22:10:38 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_033) < 222143 2013-Sep-24 22:10:38 INFO5 is_if_valid: Condition parsed as: 22.013819666666667 < 22.361944444444447 2013-Sep-24 22:10:38 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=305.23 alfaangle=66.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_033 ra=231000.00 dec=92200.00' 2013-Sep-24 22:10:38 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-24 22:10:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:10:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 305.23 66.5 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_033 231000.00 92200.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:10:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-24 22:10:39 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2013-Sep-24 22:10:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2013-Sep-24 22:10:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-24 22:10:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_033} 2013-Sep-24 22:10:39 INFO3 fixed_driftmap: Sending telescope to Az = 305.23 and ZA = 14.84 2013-Sep-24 22:10:39 LOG3 track_source: Calling 'track_source AGES7619_p1_033 305.23 14.8441257614 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:10:39 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:10:39 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2013-Sep-24 22:10:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_033} INFO {Slewing to source 'AGES7619_p1_033' ...} 2013-Sep-24 22:10:39 INFO1 track_source: Starting to track AGES7619_p1_033 2013-Sep-24 22:10:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_033" 2013-Sep-24 22:10:39 LOG3 vw_send: To DATATAKING: set ra 305.23 2013-Sep-24 22:10:39 LOG3 vw_send: To DATATAKING: set dec 14.8441257614 2013-Sep-24 22:10:39 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:10:39 LOG3 vw_send: To DATATAKING: pnt tr 305.23 14.8441257614 -CF 2013-Sep-24 22:10:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:10:39 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:10:39 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2013-Sep-24 22:10:39 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:10:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:10:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:10:40 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2013-Sep-24 22:10:40 START begin_task: Starting task 'rotate ALFA to +66.5 degrees' 2013-Sep-24 22:10:40 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Sep-24 22:10:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +66.5 degrees ...} 2013-Sep-24 22:10:40 INFO2 rotate_alfa: ALFA commanded to +66.5 degrees 2013-Sep-24 22:10:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 66.5 REPLY 2013-Sep-24 22:10:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-24 22:10:40 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-24 22:10:40 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_033" 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: set ra 305.23 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: vw% 305.23 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: set dec 14.8441257614 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: 14.8441257614 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: pnt tr 305.23 14.8441257614 -CF 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:10:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:11:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-24 22:11:07 INFO3 alfa_motor: ALFA rotator in-position +66.50 degrees 2013-Sep-24 22:11:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-24 22:11:07 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2013-Sep-24 22:11:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:11:07 STOP finish_task: Finishing task 'rotate ALFA to +66.5 degrees' 2013-Sep-24 22:11:07 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Sep-24 22:11:07 INFO2 finish_task: DONE finished configuration: rotating ALFA to +66.5 degrees 2013-Sep-24 22:11:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:11:08 STOP end_task: Finishing task 'rotate ALFA to +66.5 degrees' with status 'OK' 2013-Sep-24 22:11:08 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Sep-24 22:11:08 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 22:11:08 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Sep-24 22:11:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 22:11:08 LOG3 waittrk: Start waittrk 5 2013-Sep-24 22:11:08 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 22:11:08 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2013-Sep-24 22:11:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 22:11:13 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2013-Sep-24 22:11:13 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 22:11:13 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2013-Sep-24 22:11:38 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 22:11:38 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2013-Sep-24 22:11:38 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:11:38 INFO2 waittrk: Now tracking AGES7619_p1_033 2013-Sep-24 22:11:38 LOG4 waittrk: Current telescope position: Az = 304.84 ZA = 14.84 2013-Sep-24 22:11:38 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 22:11:38 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Sep-24 22:11:38 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 22:11:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:11:38 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 22:11:38 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 22:11:39 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 22:11:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 22:11:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:11:39 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 22:11:39 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 22:11:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:11:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:11:39 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:11:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 22:11:39 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 22:11:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:11:39 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 22:11:39 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:11:39 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:11:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:11:39 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:11:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 22:11:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:11:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:11:39 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:11:39 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:11:39 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:11:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:11:39 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Sep-24 22:11:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:11:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:11:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 22:11:39 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Sep-24 22:11:40 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-24 22:11:40 INFO2 astwait: Waiting for 1186 seconds from 02:11:40 to 02:31:26 UTC ... 2013-Sep-24 22:11:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1186 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 22:11:40 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-24 22:11:40 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Sep-24 22:31:26 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-24 22:31:26 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Sep-24 22:31:26 INFO3 astwait: Finished waiting 2013-Sep-24 22:31:26 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:31:26 LOG5 dopset_later: Calling 'dopset_later 60.661666549661078' 2013-Sep-24 22:31:26 INFO3 dopset_later: Setting Doppler correction for 22:32:26 (60.7 seconds from now) 2013-Sep-24 22:31:26 LOG5 antvel: Calling 'antvel 305.230000 14.844126 F Heliocentric 60.661666549661078' 2013-Sep-24 22:31:26 LOG2 antvel: Transforming current Az = 305.23 ZA = 14.84 to apparent RA = 23:10:43.4 Dec = +09:26:43.3 2013-Sep-24 22:31:26 LOG2 antvel: Parameters to Doppler: Heliocentric 95546 2013 267 0.0 2013-Sep-24 22:31:26 INFO5 antvel: Computed antenna velocity: +5.25492 km/s 2013-Sep-24 22:31:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=5.2549173148000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-24 22:31:26 INFO4 dopset_gen: New sky frequencies: 1381.219218 1381.219218 1381.219218 1381.219218 1381.219218 1381.219218 1381.219218 1381.219218 1381.219218 2013-Sep-24 22:31:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.219218 sky0=1381.219218 sky1=1381.219218 sky2=1381.219218 sky3=1381.219218 sky4=1381.219218 sky5=1381.219218 sky6=1381.219218 sky7=1381.219218 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:31:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.219218 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631219218.0} 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:31:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-24 22:31:26 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-24 22:31:26 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:04.1 Dec = +09:22:14.7 2013-Sep-24 22:31:26 LOG3 track_source: Calling 'track_source AGES7619_p1_033 230904.1 092214.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:31:26 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:31:26 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2013-Sep-24 22:31:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_033} INFO {Slewing to source 'AGES7619_p1_033' ...} 2013-Sep-24 22:31:26 INFO1 track_source: Starting to track AGES7619_p1_033 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_033" 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: set ra 230904.1 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: set dec 092214.7 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: pnt tr 230904.1 092214.7 -CJ 2013-Sep-24 22:31:26 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:31:26 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:31:26 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2013-Sep-24 22:31:27 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:31:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:31:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:31:27 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2013-Sep-24 22:31:27 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 22:31:27 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Sep-24 22:31:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 22:31:27 LOG3 waittrk: Start waittrk 5 2013-Sep-24 22:31:27 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 22:31:27 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631219218.0} 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_033" 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: set ra 230904.1 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% 230904.1 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: set dec 092214.7 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: 092214.7 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: pnt tr 230904.1 092214.7 -CJ 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:31:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 22:31:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 22:31:32 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Sep-24 22:31:32 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 22:31:32 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2013-Sep-24 22:31:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 22:31:33 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2013-Sep-24 22:31:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:31:33 INFO2 waittrk: Now tracking AGES7619_p1_033 2013-Sep-24 22:31:33 LOG4 waittrk: Current telescope position: Az = 304.87 ZA = 14.82 2013-Sep-24 22:31:33 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 22:31:33 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Sep-24 22:31:33 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 22:31:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:31:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 22:31:33 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Sep-24 22:31:33 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-24 22:31:33 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2013-Sep-24 22:31:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-24 22:31:33 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-24 22:31:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-24 22:31:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-24 22:31:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:31:34 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-24 22:31:34 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2013-Sep-24 22:31:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-24 22:31:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:31:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:35 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:31:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-24 22:31:35 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2013-Sep-24 22:31:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-24 22:31:35 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-24 22:31:35 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Sep-24 22:31:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 22:31:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:31:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:31:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:31:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:31:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-24 22:31:35 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2013-Sep-24 22:31:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-24 22:31:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-24 22:31:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-24 22:31:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-24 22:31:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-24 22:31:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-24 22:31:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-24 22:31:36 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2013-Sep-24 22:31:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.081 0.951 ALFA beam 1: 0.973 0.964 2013-Sep-24 22:31:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.016 1.128 ALFA beam 3: 1.003 1.071 2013-Sep-24 22:31:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.092 1.068 ALFA beam 5: 0.966 0.069 2013-Sep-24 22:31:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.078 1.018 ALFA beam 7: 0.934 0.970 2013-Sep-24 22:31:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-24 22:31:36 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Sep-24 22:31:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-24 22:31:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:31:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-24 22:31:36 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Sep-24 22:31:36 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-24 22:31:36 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Sep-24 22:31:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 22:31:36 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-24 22:31:36 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-24 22:31:36 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-24 22:31:36 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2013-Sep-24 22:31:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:31:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 0.951 0.973 0.964 2013-Sep-24 22:31:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 1.128 1.003 1.071 2013-Sep-24 22:31:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 1.068 0.966 0.069 2013-Sep-24 22:31:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.018 0.934 0.970 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.6 27.7 B 29.2 29.5 mn:A 0.4 0.4 B 0.3 0.8 gn: 8 11 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.4 28.1 B 29.1 30.9 mn:A 1.1 0.4 B 0.4 0.0 gn: 9 12 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.8 28.7 B 31.9 26.7 mn:A -0.0 -0.3 B -0.2 0.9 gn: 10 8 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 31.4 31.4 mn:A 1.4 0.9 B 0.7 1.2 gn: 11 8 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b2s0g0 rms:A 30.1 29.2 B 30.1 31.6 mn:A 0.3 -0.1 B 0.4 0.2 gn: 6 9 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.0 31.2 B 33.2 30.8 mn:A 0.2 -0.5 B -0.1 0.4 gn: 7 10 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.7 28.3 B 30.5 27.2 mn:A 0.1 -0.4 B -0.4 -0.3 gn: 8 10 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.9 31.2 B 31.1 32.3 mn:A -0.1 0.1 B 0.0 0.4 gn: 9 11 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.6 28.7 B 30.9 31.1 mn:A -0.2 0.7 B 0.4 -0.5 gn: 4 6 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b4s1g0 rms:A 34.3 31.1 B 32.5 31.3 mn:A 0.1 0.1 B -0.0 0.6 gn: 7 8 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.8 27.6 B 29.3 29.3 mn:A 0.8 -0.1 B 1.4 0.4 gn: 6 26 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.3 32.0 B 29.3 29.1 mn:A 0.9 -0.1 B -1.2 0.7 gn: 7 27 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.3 30.0 B 27.6 28.5 mn:A -0.1 1.4 B -0.5 -0.4 gn: 7 12 2013-Sep-24 22:31:42 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.6 28.4 B 30.2 30.5 mn:A 1.0 0.6 B -1.3 -0.8 gn: 8 14 2013-Sep-24 22:31:42 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-24 22:31:42 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2013-Sep-24 22:31:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-24 22:31:42 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-24 22:31:42 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Sep-24 22:31:42 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-24 22:31:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:31:42 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-24 22:31:42 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Sep-24 22:31:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 22:31:42 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-24 22:31:42 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2013-Sep-24 22:31:42 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-24 22:31:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:31:42 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-24 22:31:42 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:31:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:31:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:31:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:31:43 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-24 22:31:43 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-24 22:31:43 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-24 22:31:43 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 22:31:43 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 22:31:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 22:31:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:31:43 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 22:31:43 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 22:31:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 22:31:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:31:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:43 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:31:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 22:31:43 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 22:31:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:31:43 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 22:31:43 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:31:43 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:31:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:31:43 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2013-Sep-24 22:31:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:31:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 22:31:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:31:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:31:44 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:31:44 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2013-Sep-24 22:31:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:31:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20130924.a2048.0003.fits 2013-Sep-24 22:31:44 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:31:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:31:44 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2013-Sep-24 22:31:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:31:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:31:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 22:31:44 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2013-Sep-24 22:31:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-24 22:31:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-24 22:31:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-24 22:31:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:31:44 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Sep-24 22:31:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130924.a2048.0003.fits} 2013-Sep-24 22:31:44 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:31:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-24 22:31:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:31:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:31:44 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Sep-24 22:31:44 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-24 22:31:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 22:31:44 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2013-Sep-24 22:31:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-24 22:31:44 LOG5 log_alfabeam: Parameters: 23.151138888888887 9.3707499999999992 22.350061 2013.7335761274621 66.499985 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 0 23.151138888888880 9.370750000000003 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 1 23.148854206470759 9.466398898635822 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 2 23.144433725532860 9.403031359478678 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 3 23.146682220583966 9.307221518549071 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 4 23.153386154425998 9.274735813730306 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 5 23.157857903107800 9.338864174061655 2013-Sep-24 22:31:44 LOG4 log_alfabeam: ALFABEAM 6 23.155574382813629 9.434717635296892 2013-Sep-24 22:31:44 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: object=AGES7619_p1_033 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: patternid=326700128 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: scanid=326700142 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: topoafreqhz=1456219218.0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: topobfreqhz=1306219218.0 2013-Sep-24 22:31:45 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 22:31:45 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 22:31:45 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_033:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326700128:scanid=326700142:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456219218.0:topobfreqhz=1306219218.0:filetype=1 2013-Sep-24 22:31:45 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 22:31:45 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2013-Sep-24 22:31:45 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 22:31:45 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 22:31:45 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2013-Sep-24 22:31:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 22:31:45 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 22:31:45 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 22:31:45 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 22:31:45 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2013-Sep-24 22:31:45 LOG4 from_mock: From MOCK: starok 2013-Sep-24 22:31:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 22:31:45 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2013-Sep-24 22:31:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 22:31:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700142 2013-Sep-24 22:31:46 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 22:31:46 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2013-Sep-24 22:31:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 22:31:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:31:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 22:31:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-24 22:31:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9107.00 2013-Sep-24 22:31:47 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2013-Sep-24 22:31:47 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 22:31:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 22:31:47 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 22:31:47 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:50 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:31:50.00 2013-Sep-24 22:31:50 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380076310.00 Tue Sep 24 22:31:50 2013 2013-Sep-24 22:31:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.219218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:31:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:31:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:31:56 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 22:31:56 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 22:31:56 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 22:31:56 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2013-Sep-24 22:31:56 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 22:31:56 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2013-Sep-24 22:31:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-24 22:31:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:31:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:31:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:31:56 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2013-Sep-24 22:31:56 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:31:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:31:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:31:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:31:56 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2013-Sep-24 22:31:56 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-24 22:31:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 22:31:56 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2013-Sep-24 22:31:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-24 22:31:56 LOG5 log_alfabeam: Parameters: 23.151138888888887 9.3707499999999992 22.353682 2013.7335765394073 66.499985 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 0 23.151138888888887 9.370749999999999 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 1 23.148867378476194 9.466467311617221 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 2 23.144438221555514 9.403234873978182 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 3 23.146673418091591 9.307357221111864 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 4 23.153372831082518 9.274667459455442 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 5 23.157853503712662 9.338661500223770 2013-Sep-24 22:31:56 LOG4 log_alfabeam: ALFABEAM 6 23.155583179831016 9.434583919154418 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: object=AGES7619_p1_033 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-24 22:31:56 TEST take_mock_data: PSET configuration: patternid=326700128 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: scanid=326700143 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: topoafreqhz=1456219218.0 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: topobfreqhz=1306219218.0 2013-Sep-24 22:31:57 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 22:31:57 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 22:31:57 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_033:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326700128:scanid=326700143:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456219218.0:topobfreqhz=1306219218.0:filetype=1 2013-Sep-24 22:31:57 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 22:31:57 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2013-Sep-24 22:31:57 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 22:31:57 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 22:31:57 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2013-Sep-24 22:31:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 22:31:57 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 22:31:57 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 22:31:57 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 22:31:57 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2013-Sep-24 22:31:57 LOG4 from_mock: From MOCK: starok 2013-Sep-24 22:31:57 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 22:31:57 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2013-Sep-24 22:31:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 22:31:57 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700143 2013-Sep-24 22:31:58 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 22:31:58 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2013-Sep-24 22:31:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 22:31:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:31:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 22:31:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-24 22:31:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9119.00 2013-Sep-24 22:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.084 and 1.561 (still bad) 2013-Sep-24 22:31:59 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 22:31:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 22:31:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:31:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:32:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:32:02.01 2013-Sep-24 22:32:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380076322.01 Tue Sep 24 22:32:02 2013 2013-Sep-24 22:32:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.219218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:32:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:32:04 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-24 22:32:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.137 (still bad) 2013-Sep-24 22:32:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 22:32:08 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 22:32:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 22:32:08 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 22:32:08 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 22:32:08 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-24 22:32:08 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-24 22:32:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:32:08 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-24 22:32:08 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-24 22:32:08 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 305.23 and ZA = 14.84 2013-Sep-24 22:32:08 LOG3 track_source: Calling 'track_source AGES7619_p1_033 305.23 14.8441257614 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:32:08 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:32:08 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_033} INFO {Slewing to source 'AGES7619_p1_033' ...} 2013-Sep-24 22:32:08 INFO1 track_source: Starting to track AGES7619_p1_033 2013-Sep-24 22:32:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_033" 2013-Sep-24 22:32:08 LOG3 vw_send: To DATATAKING: set ra 305.23 2013-Sep-24 22:32:08 LOG3 vw_send: To DATATAKING: set dec 14.8441257614 2013-Sep-24 22:32:08 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:32:08 LOG3 vw_send: To DATATAKING: pnt tr 305.23 14.8441257614 -CF 2013-Sep-24 22:32:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:32:08 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:32:08 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:32:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:32:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:32:08 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Sep-24 22:32:08 LOG1 fixed_driftmap: Parameters: HA = -00:48:59.5 Start = 22:21:44.0 LST = 22:21:25.3 diff = 18.7 secs 2013-Sep-24 22:32:09 INFO2 fixed_driftmap: Waiting 16.7 seconds for RA 23:10:44 2013-Sep-24 22:32:09 INFO2 lstwait: Waiting for 16.7 secs from LST 22:21:25 to LST 22:21:42 ... 2013-Sep-24 22:32:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.665721968226695 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 22:32:09 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-24 22:32:09 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_033" 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: set ra 305.23 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: vw% 305.23 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: set dec 14.8441257614 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: 14.8441257614 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: pnt tr 305.23 14.8441257614 -CF 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:32:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 22:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.137 (still bad) 2013-Sep-24 22:32:25 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-24 22:32:25 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2013-Sep-24 22:32:25 LOG4 lstwait: Finished waiting 1.34 seconds late 2013-Sep-24 22:32:25 INFO3 lstwait: Finished waiting 2013-Sep-24 22:32:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:32:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-24 22:32:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-24 22:32:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-24 22:32:26 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-24 22:32:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 22:32:26 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Sep-24 22:32:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-24 22:32:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: object=AGES7619_p1_033 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: patternid=326700144 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: scanid=326700144 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: topoafreqhz=1456219218.0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: topobfreqhz=1306219218.0 2013-Sep-24 22:32:26 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 22:32:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 22:32:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_033:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326700144:scanid=326700144:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456219218.0:topobfreqhz=1306219218.0:filetype=1 2013-Sep-24 22:32:26 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 22:32:26 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2013-Sep-24 22:32:26 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 22:32:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 22:32:26 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2013-Sep-24 22:32:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 22:32:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 22:32:26 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-24 22:32:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 22:32:26 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2013-Sep-24 22:32:26 LOG4 from_mock: From MOCK: starok 2013-Sep-24 22:32:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 22:32:26 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2013-Sep-24 22:32:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 22:32:27 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326700144 2013-Sep-24 22:32:27 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 22:32:27 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2013-Sep-24 22:32:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 22:32:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:32:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 22:32:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-24 22:32:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9148.00 2013-Sep-24 22:32:29 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 22:32:29 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-24 22:32:29 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.219218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.219218 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.131 (still bad) 2013-Sep-24 22:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.130 (still bad) 2013-Sep-24 22:32:32 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:32:32.01 2013-Sep-24 22:32:32 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380076352.01 Tue Sep 24 22:32:32 2013 2013-Sep-24 22:32:32 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 22:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 22:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.139 (still bad) 2013-Sep-24 22:32:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.076 < 0.75)! 2013-Sep-24 22:32:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.187 1.028 1.007 0.983 2013-Sep-24 22:32:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.045 1.154 1.036 1.096 2013-Sep-24 22:32:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 1.091 1.003 0.076 2013-Sep-24 22:32:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.159 1.119 1.004 1.045 2013-Sep-24 22:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-24 22:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.155 (still bad) 2013-Sep-24 22:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.147 (still bad) 2013-Sep-24 22:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.159 (still bad) 2013-Sep-24 22:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.137 (still bad) 2013-Sep-24 22:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.146 (still bad) 2013-Sep-24 22:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.155 (still bad) 2013-Sep-24 22:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.161 (still bad) 2013-Sep-24 22:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.167 (still bad) 2013-Sep-24 22:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.198 (still bad) 2013-Sep-24 22:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.173 (still bad) 2013-Sep-24 22:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.169 (still bad) 2013-Sep-24 22:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.163 (still bad) 2013-Sep-24 22:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.152 (still bad) 2013-Sep-24 22:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.145 (still bad) 2013-Sep-24 22:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.171 (still bad) 2013-Sep-24 22:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.148 (still bad) 2013-Sep-24 22:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-24 22:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.157 (still bad) 2013-Sep-24 22:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-24 22:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.149 (still bad) 2013-Sep-24 22:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.173 (still bad) 2013-Sep-24 22:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.144 (still bad) 2013-Sep-24 22:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.143 (still bad) 2013-Sep-24 22:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.137 (still bad) 2013-Sep-24 22:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-24 22:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-24 22:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-24 22:33:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:33:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 0.943 0.977 0.958 2013-Sep-24 22:33:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 1.133 1.006 1.069 2013-Sep-24 22:33:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 1.068 0.971 0.069 2013-Sep-24 22:33:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.042 0.930 0.973 2013-Sep-24 22:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.137 (still bad) 2013-Sep-24 22:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.139 (still bad) 2013-Sep-24 22:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 22:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 22:33:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.133 (still bad) 2013-Sep-24 22:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 22:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.131 (still bad) 2013-Sep-24 22:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.138 (still bad) 2013-Sep-24 22:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-24 22:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.130 (still bad) 2013-Sep-24 22:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 22:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-24 22:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 22:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.137 (still bad) 2013-Sep-24 22:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.130 (still bad) 2013-Sep-24 22:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-24 22:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 22:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.128 (still bad) 2013-Sep-24 22:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 22:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.157 (still bad) 2013-Sep-24 22:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.255 (still bad) 2013-Sep-24 22:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.373 (still bad) 2013-Sep-24 22:34:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.480 (still bad) 2013-Sep-24 22:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.532 (still bad) 2013-Sep-24 22:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.073 and 1.549 (still bad) 2013-Sep-24 22:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.506 (still bad) 2013-Sep-24 22:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.400 (still bad) 2013-Sep-24 22:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.289 (still bad) 2013-Sep-24 22:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.187 (still bad) 2013-Sep-24 22:34:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 22:34:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.104 0.946 0.983 0.960 2013-Sep-24 22:34:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 1.127 1.005 1.067 2013-Sep-24 22:34:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 1.105 1.094 0.070 2013-Sep-24 22:34:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.045 0.935 0.976 2013-Sep-24 22:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.164 (still bad) 2013-Sep-24 22:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.189 (still bad) 2013-Sep-24 22:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.190 (still bad) 2013-Sep-24 22:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.264 (still bad) 2013-Sep-24 22:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.246 (still bad) 2013-Sep-24 22:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.259 (still bad) 2013-Sep-24 22:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.240 (still bad) 2013-Sep-24 22:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.191 (still bad) 2013-Sep-24 22:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.158 (still bad) 2013-Sep-24 22:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.244 (still bad) 2013-Sep-24 22:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.361 (still bad) 2013-Sep-24 22:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.470 (still bad) 2013-Sep-24 22:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.562 (still bad) 2013-Sep-24 22:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.625 (still bad) 2013-Sep-24 22:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.597 (still bad) 2013-Sep-24 22:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.529 (still bad) 2013-Sep-24 22:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.369 (still bad) 2013-Sep-24 22:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.257 (still bad) 2013-Sep-24 22:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.166 (still bad) 2013-Sep-24 22:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.130 (still bad) 2013-Sep-24 22:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-24 22:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.169 (still bad) 2013-Sep-24 22:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.159 (still bad) 2013-Sep-24 22:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.170 (still bad) 2013-Sep-24 22:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.174 (still bad) 2013-Sep-24 22:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.172 (still bad) 2013-Sep-24 22:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.165 (still bad) 2013-Sep-24 22:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.181 (still bad) 2013-Sep-24 22:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-24 22:35:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:35:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 0.943 0.979 0.958 2013-Sep-24 22:35:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 1.138 1.019 1.074 2013-Sep-24 22:35:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 1.068 0.982 0.069 2013-Sep-24 22:35:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.049 0.936 0.979 2013-Sep-24 22:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 22:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:35:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.153 (still bad) 2013-Sep-24 22:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 22:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.135 (still bad) 2013-Sep-24 22:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 22:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:36:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.152 (still bad) 2013-Sep-24 22:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.131 (still bad) 2013-Sep-24 22:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.128 (still bad) 2013-Sep-24 22:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.147 (still bad) 2013-Sep-24 22:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.127 (still bad) 2013-Sep-24 22:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.148 (still bad) 2013-Sep-24 22:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.150 (still bad) 2013-Sep-24 22:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:36:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:36:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.102 0.955 0.984 0.962 2013-Sep-24 22:36:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 1.120 1.010 1.068 2013-Sep-24 22:36:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 1.064 0.978 0.069 2013-Sep-24 22:36:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 1.047 0.932 0.979 2013-Sep-24 22:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.145 (still bad) 2013-Sep-24 22:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.155 (still bad) 2013-Sep-24 22:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 22:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.130 (still bad) 2013-Sep-24 22:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.146 (still bad) 2013-Sep-24 22:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.148 (still bad) 2013-Sep-24 22:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:37:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:37:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.938 0.971 0.950 2013-Sep-24 22:37:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 1.121 1.006 1.065 2013-Sep-24 22:37:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 1.062 0.969 0.069 2013-Sep-24 22:37:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 1.043 0.929 0.972 2013-Sep-24 22:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.145 (still bad) 2013-Sep-24 22:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.142 (still bad) 2013-Sep-24 22:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.123 (still bad) 2013-Sep-24 22:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.146 (still bad) 2013-Sep-24 22:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.145 (still bad) 2013-Sep-24 22:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-24 22:38:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:38:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 0.938 0.972 0.952 2013-Sep-24 22:38:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 1.122 1.002 1.064 2013-Sep-24 22:38:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 1.060 0.969 0.069 2013-Sep-24 22:38:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.046 0.931 0.975 2013-Sep-24 22:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:39:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.123 (still bad) 2013-Sep-24 22:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:39:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 0.935 0.970 0.948 2013-Sep-24 22:39:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 1.118 1.004 1.065 2013-Sep-24 22:39:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 1.060 0.967 0.069 2013-Sep-24 22:39:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.046 0.931 0.974 2013-Sep-24 22:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.126 (still bad) 2013-Sep-24 22:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:40:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.123 (still bad) 2013-Sep-24 22:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 22:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.141 (still bad) 2013-Sep-24 22:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.142 (still bad) 2013-Sep-24 22:40:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.141 (still bad) 2013-Sep-24 22:40:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:40:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:40:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 0.940 0.972 0.948 2013-Sep-24 22:40:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 1.121 1.006 1.068 2013-Sep-24 22:40:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 1.062 0.965 0.069 2013-Sep-24 22:40:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 1.046 0.930 0.974 2013-Sep-24 22:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.144 (still bad) 2013-Sep-24 22:41:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.142 (still bad) 2013-Sep-24 22:41:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:41:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.142 (still bad) 2013-Sep-24 22:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:41:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.144 (still bad) 2013-Sep-24 22:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:41:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.143 (still bad) 2013-Sep-24 22:41:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:41:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 0.942 0.971 0.950 2013-Sep-24 22:41:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 1.124 1.003 1.067 2013-Sep-24 22:41:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 1.060 0.962 0.069 2013-Sep-24 22:41:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 1.044 0.926 0.972 2013-Sep-24 22:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:42:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 22:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.126 (still bad) 2013-Sep-24 22:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:42:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.125 (still bad) 2013-Sep-24 22:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:42:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:42:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:42:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 0.941 0.970 0.951 2013-Sep-24 22:42:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 1.119 0.999 1.064 2013-Sep-24 22:42:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 1.056 0.961 0.069 2013-Sep-24 22:42:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 1.045 0.928 0.974 2013-Sep-24 22:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.127 (still bad) 2013-Sep-24 22:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:43:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-24 22:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:43:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.128 (still bad) 2013-Sep-24 22:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:43:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.123 (still bad) 2013-Sep-24 22:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.129 (still bad) 2013-Sep-24 22:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.145 (still bad) 2013-Sep-24 22:43:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-24 22:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.146 (still bad) 2013-Sep-24 22:43:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-24 22:43:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 22:43:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.129 0.952 0.990 0.971 2013-Sep-24 22:43:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.033 1.128 1.026 1.076 2013-Sep-24 22:43:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 1.062 0.986 0.070 2013-Sep-24 22:43:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.064 0.949 0.993 2013-Sep-24 22:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:44:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.146 (still bad) 2013-Sep-24 22:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.127 (still bad) 2013-Sep-24 22:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:44:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.143 (still bad) 2013-Sep-24 22:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:44:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.142 (still bad) 2013-Sep-24 22:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:44:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.143 (still bad) 2013-Sep-24 22:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:44:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.142 (still bad) 2013-Sep-24 22:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:44:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:44:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.952 0.982 0.958 2013-Sep-24 22:44:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 1.119 1.015 1.075 2013-Sep-24 22:44:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 1.056 0.969 0.069 2013-Sep-24 22:44:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 1.050 0.929 0.977 2013-Sep-24 22:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:45:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.144 (still bad) 2013-Sep-24 22:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:45:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.124 (still bad) 2013-Sep-24 22:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.131 (still bad) 2013-Sep-24 22:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:45:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 22:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 22:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.146 (still bad) 2013-Sep-24 22:45:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 22:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.145 (still bad) 2013-Sep-24 22:45:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:45:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:45:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.944 0.971 0.953 2013-Sep-24 22:45:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 1.120 1.002 1.064 2013-Sep-24 22:45:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 1.054 0.960 0.069 2013-Sep-24 22:45:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 1.047 0.927 0.975 2013-Sep-24 22:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.145 (still bad) 2013-Sep-24 22:46:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.127 (still bad) 2013-Sep-24 22:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.143 (still bad) 2013-Sep-24 22:46:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.144 (still bad) 2013-Sep-24 22:46:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 22:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 22:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.143 (still bad) 2013-Sep-24 22:46:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 22:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.144 (still bad) 2013-Sep-24 22:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:47:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:47:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 0.939 0.972 0.952 2013-Sep-24 22:47:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 1.119 1.004 1.065 2013-Sep-24 22:47:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 1.052 0.963 0.069 2013-Sep-24 22:47:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 1.046 0.926 0.974 2013-Sep-24 22:47:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.133 (still bad) 2013-Sep-24 22:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.128 (still bad) 2013-Sep-24 22:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:48:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:48:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.940 0.975 0.956 2013-Sep-24 22:48:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.020 1.123 1.014 1.070 2013-Sep-24 22:48:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 1.055 0.969 0.069 2013-Sep-24 22:48:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 1.049 0.932 0.977 2013-Sep-24 22:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.143 (still bad) 2013-Sep-24 22:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.143 (still bad) 2013-Sep-24 22:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 22:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.142 (still bad) 2013-Sep-24 22:49:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:49:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 0.936 0.970 0.950 2013-Sep-24 22:49:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 1.119 1.000 1.066 2013-Sep-24 22:49:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 1.054 0.958 0.069 2013-Sep-24 22:49:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 1.045 0.925 0.975 2013-Sep-24 22:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.143 (still bad) 2013-Sep-24 22:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.143 (still bad) 2013-Sep-24 22:49:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.141 (still bad) 2013-Sep-24 22:49:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.140 (still bad) 2013-Sep-24 22:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.139 (still bad) 2013-Sep-24 22:50:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:50:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.935 0.977 0.954 2013-Sep-24 22:50:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 1.119 1.000 1.065 2013-Sep-24 22:50:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 1.055 0.960 0.069 2013-Sep-24 22:50:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 1.045 0.925 0.975 2013-Sep-24 22:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:50:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.130 (still bad) 2013-Sep-24 22:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 22:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 22:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.126 (still bad) 2013-Sep-24 22:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 22:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.127 (still bad) 2013-Sep-24 22:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.122 (still bad) 2013-Sep-24 22:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 22:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:51:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:51:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 0.934 0.975 0.952 2013-Sep-24 22:51:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 1.118 1.003 1.063 2013-Sep-24 22:51:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 1.050 0.969 0.069 2013-Sep-24 22:51:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 1.050 0.930 0.978 2013-Sep-24 22:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 22:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 22:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.121 (still bad) 2013-Sep-24 22:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 22:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.123 (still bad) 2013-Sep-24 22:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 22:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 22:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.141 (still bad) 2013-Sep-24 22:52:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.119 (still bad) 2013-Sep-24 22:52:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:52:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.942 0.987 0.964 2013-Sep-24 22:52:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 1.117 1.007 1.064 2013-Sep-24 22:52:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 1.052 0.967 0.069 2013-Sep-24 22:52:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 1.052 0.929 0.980 2013-Sep-24 22:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.139 (still bad) 2013-Sep-24 22:52:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 22:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 22:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 22:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.141 (still bad) 2013-Sep-24 22:52:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 22:52:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:52:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 22:52:33 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 22:52:33 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 22:52:33 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2013-Sep-24 22:52:33 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 22:52:33 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Sep-24 22:52:33 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-24 22:52:33 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2013-Sep-24 22:52:33 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-24 22:52:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 22:52:33 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-24 22:52:33 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2013-Sep-24 22:52:33 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2013-Sep-24 22:52:33 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES7619_p1_111) < 224443 THEN' 2013-Sep-24 22:52:35 LOG3 is_if_valid: Current source data: up 326.3 12.9 UP - - 96 0.9 2013-Sep-24 22:52:35 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_111) < 224443 2013-Sep-24 22:52:35 INFO5 is_if_valid: Condition parsed as: 22.713234 < 22.74527777777778 2013-Sep-24 22:52:35 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=328.94 alfaangle=45.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_111 ra=231000.00 dec=72500.00' 2013-Sep-24 22:52:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-24 22:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 22:52:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 22:52:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 328.94 45.0 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_111 231000.00 72500.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:52:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-24 22:52:35 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2013-Sep-24 22:52:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_033' 2013-Sep-24 22:52:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-24 22:52:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_111} 2013-Sep-24 22:52:36 INFO3 fixed_driftmap: Sending telescope to Az = 328.94 and ZA = 12.57 2013-Sep-24 22:52:36 LOG3 track_source: Calling 'track_source AGES7619_p1_111 328.94 12.5663461229 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:52:36 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:52:36 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2013-Sep-24 22:52:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_111} INFO {Slewing to source 'AGES7619_p1_111' ...} 2013-Sep-24 22:52:36 INFO1 track_source: Starting to track AGES7619_p1_111 2013-Sep-24 22:52:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_111" 2013-Sep-24 22:52:36 LOG3 vw_send: To DATATAKING: set ra 328.94 2013-Sep-24 22:52:36 LOG3 vw_send: To DATATAKING: set dec 12.5663461229 2013-Sep-24 22:52:36 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:52:36 LOG3 vw_send: To DATATAKING: pnt tr 328.94 12.5663461229 -CF 2013-Sep-24 22:52:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:52:36 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:52:36 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2013-Sep-24 22:52:36 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:52:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:52:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:52:36 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2013-Sep-24 22:52:36 START begin_task: Starting task 'rotate ALFA to +45 degrees' 2013-Sep-24 22:52:36 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Sep-24 22:52:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +45 degrees ...} 2013-Sep-24 22:52:36 INFO2 rotate_alfa: ALFA commanded to +45.0 degrees 2013-Sep-24 22:52:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION 45.0 REPLY 2013-Sep-24 22:52:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-24 22:52:36 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-24 22:52:36 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_111" 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: set ra 328.94 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: vw% 328.94 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: set dec 12.5663461229 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:52:36 LOG4 got_cormsg: From DATATAKING: 12.5663461229 2013-Sep-24 22:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:52:37 LOG4 got_cormsg: From DATATAKING: pnt tr 328.94 12.5663461229 -CF 2013-Sep-24 22:52:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:52:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 22:52:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-24 22:52:49 INFO3 alfa_motor: ALFA rotator in-position +45.00 degrees 2013-Sep-24 22:52:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-24 22:52:50 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Sep-24 22:52:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:52:50 STOP finish_task: Finishing task 'rotate ALFA to +45 degrees' 2013-Sep-24 22:52:50 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Sep-24 22:52:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to +45 degrees 2013-Sep-24 22:52:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:52:50 STOP end_task: Finishing task 'rotate ALFA to +45 degrees' with status 'OK' 2013-Sep-24 22:52:50 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Sep-24 22:52:50 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 22:52:50 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Sep-24 22:52:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 22:52:50 LOG3 waittrk: Start waittrk 5 2013-Sep-24 22:52:50 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 22:52:50 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2013-Sep-24 22:52:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 22:52:55 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2013-Sep-24 22:52:55 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 22:52:55 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2013-Sep-24 22:53:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 22:53:49 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2013-Sep-24 22:53:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:53:49 INFO2 waittrk: Now tracking AGES7619_p1_111 2013-Sep-24 22:53:49 LOG4 waittrk: Current telescope position: Az = 328.57 ZA = 12.55 2013-Sep-24 22:53:49 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 22:53:49 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Sep-24 22:53:49 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 22:53:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:53:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 22:53:49 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Sep-24 22:53:49 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 22:53:49 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Sep-24 22:53:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 22:53:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 22:53:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:53:49 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 22:53:49 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2013-Sep-24 22:53:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 22:53:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:53:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:53:50 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:53:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 22:53:50 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2013-Sep-24 22:53:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 22:53:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:53:50 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 22:53:50 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:53:50 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2013-Sep-24 22:53:51 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:53:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:53:51 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2013-Sep-24 22:53:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:53:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 22:53:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:53:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:53:51 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:53:51 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Sep-24 22:53:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:53:51 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:53:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:53:51 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Sep-24 22:53:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:53:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:53:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 22:53:51 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Sep-24 22:53:51 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-24 22:53:51 INFO2 astwait: Waiting for 30 seconds from 02:53:51 to 02:54:21 UTC ... 2013-Sep-24 22:53:51 LOG4 send_obs_status: To obs_status: <1> TASKTIME 30 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 22:53:51 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-24 22:53:51 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Sep-24 22:54:21 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-24 22:54:21 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Sep-24 22:54:21 INFO3 astwait: Finished waiting 2013-Sep-24 22:54:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:54:21 LOG5 dopset_later: Calling 'dopset_later 61.306296034387429' 2013-Sep-24 22:54:21 INFO3 dopset_later: Setting Doppler correction for 22:55:21 (61.3 seconds from now) 2013-Sep-24 22:54:21 LOG5 antvel: Calling 'antvel 328.940000 12.566346 F Heliocentric 61.306296034387429' 2013-Sep-24 22:54:21 LOG2 antvel: Transforming current Az = 328.94 ZA = 12.57 to apparent RA = 23:10:43.5 Dec = +07:29:43.2 2013-Sep-24 22:54:21 LOG2 antvel: Parameters to Doppler: Heliocentric 96921 2013 267 0.0 2013-Sep-24 22:54:21 INFO5 antvel: Computed antenna velocity: +5.73933 km/s 2013-Sep-24 22:54:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=5.7393281832999996 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-24 22:54:21 INFO4 dopset_gen: New sky frequencies: 1381.216986 1381.216986 1381.216986 1381.216986 1381.216986 1381.216986 1381.216986 1381.216986 1381.216986 2013-Sep-24 22:54:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.216986 sky0=1381.216986 sky1=1381.216986 sky2=1381.216986 sky3=1381.216986 sky4=1381.216986 sky5=1381.216986 sky6=1381.216986 sky7=1381.216986 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 22:54:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.216986 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631216986.0} 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:54:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-24 22:54:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-24 22:54:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:03.5 Dec = +07:25:14.6 2013-Sep-24 22:54:21 LOG3 track_source: Calling 'track_source AGES7619_p1_111 230903.5 072514.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:54:21 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:54:21 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2013-Sep-24 22:54:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_111} INFO {Slewing to source 'AGES7619_p1_111' ...} 2013-Sep-24 22:54:21 INFO1 track_source: Starting to track AGES7619_p1_111 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_111" 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: set ra 230903.5 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: set dec 072514.6 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: pnt tr 230903.5 072514.6 -CJ 2013-Sep-24 22:54:21 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:54:21 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:54:21 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2013-Sep-24 22:54:21 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:54:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:54:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:54:22 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2013-Sep-24 22:54:22 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 22:54:22 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Sep-24 22:54:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 22:54:22 LOG3 waittrk: Start waittrk 5 2013-Sep-24 22:54:22 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 22:54:22 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631216986.0} 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_111" 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: set ra 230903.5 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% 230903.5 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: set dec 072514.6 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: 072514.6 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: pnt tr 230903.5 072514.6 -CJ 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:54:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 22:54:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 22:54:27 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2013-Sep-24 22:54:27 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 22:54:27 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Sep-24 22:54:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 22:54:28 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Sep-24 22:54:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:54:28 INFO2 waittrk: Now tracking AGES7619_p1_111 2013-Sep-24 22:54:28 LOG4 waittrk: Current telescope position: Az = 328.62 ZA = 12.54 2013-Sep-24 22:54:28 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 22:54:28 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Sep-24 22:54:28 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 22:54:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:54:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 22:54:28 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Sep-24 22:54:28 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-24 22:54:28 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2013-Sep-24 22:54:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-24 22:54:28 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-24 22:54:28 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-24 22:54:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-24 22:54:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:54:28 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-24 22:54:28 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2013-Sep-24 22:54:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-24 22:54:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:54:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:31 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:54:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-24 22:54:31 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2013-Sep-24 22:54:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-24 22:54:31 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-24 22:54:31 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Sep-24 22:54:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 22:54:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:54:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:54:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:54:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 22:54:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-24 22:54:32 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2013-Sep-24 22:54:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-24 22:54:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:32 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-24 22:54:32 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 7 dB --- beam 3: 6 4 dB 2013-Sep-24 22:54:32 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-24 22:54:32 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-24 22:54:32 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-24 22:54:32 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-24 22:54:32 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2013-Sep-24 22:54:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.074 0.931 ALFA beam 1: 0.988 0.999 2013-Sep-24 22:54:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.960 0.878 ALFA beam 3: 0.952 1.047 2013-Sep-24 22:54:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.056 1.030 ALFA beam 5: 0.928 0.069 2013-Sep-24 22:54:32 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.058 1.051 ALFA beam 7: 0.919 0.982 2013-Sep-24 22:54:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-24 22:54:32 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Sep-24 22:54:32 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-24 22:54:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:54:32 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-24 22:54:32 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Sep-24 22:54:32 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-24 22:54:32 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2013-Sep-24 22:54:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 22:54:33 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-24 22:54:33 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-24 22:54:33 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-24 22:54:33 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2013-Sep-24 22:54:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:54:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 0.931 0.988 0.999 2013-Sep-24 22:54:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.878 0.952 1.047 2013-Sep-24 22:54:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.056 1.030 0.928 0.069 2013-Sep-24 22:54:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.051 0.919 0.982 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.2 27.4 B 29.0 29.2 mn:A 0.5 0.4 B 0.3 0.9 gn: 8 11 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.3 28.0 B 29.3 31.1 mn:A 1.0 0.3 B 0.3 0.0 gn: 9 12 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.0 29.0 B 32.0 26.8 mn:A -0.1 -0.4 B -0.1 0.9 gn: 10 8 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.2 27.8 B 30.0 30.0 mn:A 1.2 0.9 B 0.7 1.2 gn: 11 7 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.4 28.5 B 29.7 31.2 mn:A 0.3 -0.1 B 0.5 0.2 gn: 6 9 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.1 30.3 B 29.8 27.7 mn:A 0.1 -0.5 B -0.1 0.4 gn: 7 9 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 30.9 B 30.1 26.8 mn:A 0.1 -0.4 B -0.3 -0.2 gn: 9 10 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.3 30.6 B 30.6 31.8 mn:A -0.1 0.1 B -0.0 0.3 gn: 9 11 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.1 28.3 B 30.2 30.4 mn:A -0.2 0.6 B 0.3 -0.5 gn: 4 6 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.0 27.1 B 31.7 30.6 mn:A 0.1 0.1 B -0.2 0.4 gn: 6 8 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.8 30.5 B 29.2 29.2 mn:A 0.9 -0.2 B 1.4 0.5 gn: 7 26 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.7 31.4 B 29.2 29.0 mn:A 0.9 -0.1 B -1.2 0.6 gn: 7 27 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.1 29.9 B 30.9 31.9 mn:A -0.2 1.4 B -0.5 -0.5 gn: 7 13 2013-Sep-24 22:54:38 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.7 28.5 B 30.2 30.4 mn:A 1.1 0.7 B -1.3 -0.8 gn: 8 14 2013-Sep-24 22:54:38 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-24 22:54:38 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2013-Sep-24 22:54:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-24 22:54:38 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-24 22:54:39 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-24 22:54:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:54:39 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-24 22:54:39 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 22:54:39 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-24 22:54:39 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-24 22:54:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:54:39 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-24 22:54:39 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:54:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:54:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:54:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 22:54:39 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-24 22:54:39 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-24 22:54:39 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-24 22:54:39 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 22:54:39 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 22:54:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 22:54:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:54:39 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 22:54:39 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2013-Sep-24 22:54:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 22:54:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 22:54:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 22:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:39 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 22:54:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 22:54:40 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 22:54:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:54:40 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 22:54:40 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:54:40 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:54:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:54:40 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:54:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 22:54:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 22:54:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:54:40 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 22:54:40 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:54:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20130924.a2048.0004.fits 2013-Sep-24 22:54:40 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 22:54:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 22:54:40 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 22:54:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 22:54:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 22:54:40 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-24 22:54:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-24 22:54:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-24 22:54:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:54:40 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130924.a2048.0004.fits} 2013-Sep-24 22:54:40 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:54:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-24 22:54:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:54:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:54:40 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2013-Sep-24 22:54:40 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-24 22:54:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 22:54:41 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2013-Sep-24 22:54:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-24 22:54:41 LOG5 log_alfabeam: Parameters: 23.150972222222222 7.4207222222222242 22.733609 2013.7336197619591 44.999947 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 0 23.150972222222215 7.420722222222222 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 1 23.148953224177774 7.522060107171193 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 2 23.144716586730084 7.455137422070659 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 3 23.146685969765901 7.353573181051053 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 4 23.152966416118037 7.319233138124820 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 5 23.157260948564829 7.386948115542713 2013-Sep-24 22:54:41 LOG4 log_alfabeam: ALFABEAM 6 23.155217193787401 7.488208165042076 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: object=AGES7619_p1_111 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: patternid=326700144 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: scanid=326700145 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: topoafreqhz=1456216986.0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: topobfreqhz=1306216986.0 2013-Sep-24 22:54:41 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 22:54:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 22:54:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_111:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326700144:scanid=326700145:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216986.0:topobfreqhz=1306216986.0:filetype=1 2013-Sep-24 22:54:41 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 22:54:41 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2013-Sep-24 22:54:41 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 22:54:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 22:54:41 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2013-Sep-24 22:54:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 22:54:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 22:54:41 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 22:54:42 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 22:54:42 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2013-Sep-24 22:54:42 LOG4 from_mock: From MOCK: starok 2013-Sep-24 22:54:42 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 22:54:42 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2013-Sep-24 22:54:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 22:54:42 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700145 2013-Sep-24 22:54:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 22:54:42 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2013-Sep-24 22:54:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 22:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:54:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 22:54:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-24 22:54:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10483.00 2013-Sep-24 22:54:44 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 22:54:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 22:54:44 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:44 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:47 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:54:47.02 2013-Sep-24 22:54:47 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380077687.02 Tue Sep 24 22:54:47 2013 2013-Sep-24 22:54:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216986 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:54:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:54:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.489 (still bad) 2013-Sep-24 22:54:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 22:54:53 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 22:54:53 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 22:54:53 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2013-Sep-24 22:54:53 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 22:54:53 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2013-Sep-24 22:54:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-24 22:54:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 22:54:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 22:54:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 22:54:53 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2013-Sep-24 22:54:53 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 22:54:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 22:54:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 22:54:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 22:54:53 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2013-Sep-24 22:54:53 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-24 22:54:53 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 22:54:53 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2013-Sep-24 22:54:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-24 22:54:53 LOG5 log_alfabeam: Parameters: 23.150972222222222 7.4207222222222242 22.737230 2013.7336201739042 44.999947 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 0 23.150972222222212 7.420722222222228 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 1 23.148977532766867 7.522166486315836 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 2 23.144724920244769 7.455470019498372 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 3 23.146669839746437 7.353801542706741 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 4 23.152942030214216 7.319127755223290 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 5 23.157252839540330 7.386615188882940 2013-Sep-24 22:54:53 LOG4 log_alfabeam: ALFABEAM 6 23.155233315315993 7.487982749261534 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: object=AGES7619_p1_111 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: patternid=326700144 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: scanid=326700146 2013-Sep-24 22:54:53 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 22:54:54 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 22:54:54 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 22:54:54 TEST take_mock_data: PSET configuration: topoafreqhz=1456216986.0 2013-Sep-24 22:54:54 TEST take_mock_data: PSET configuration: topobfreqhz=1306216986.0 2013-Sep-24 22:54:54 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 22:54:54 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 22:54:54 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_111:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326700144:scanid=326700146:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216986.0:topobfreqhz=1306216986.0:filetype=1 2013-Sep-24 22:54:54 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 22:54:54 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2013-Sep-24 22:54:54 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 22:54:54 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 22:54:54 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2013-Sep-24 22:54:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 22:54:54 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 22:54:54 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 22:54:54 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 22:54:54 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2013-Sep-24 22:54:54 LOG4 from_mock: From MOCK: starok 2013-Sep-24 22:54:54 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 22:54:54 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2013-Sep-24 22:54:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 22:54:54 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700146 2013-Sep-24 22:54:55 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 22:54:55 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2013-Sep-24 22:54:55 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 22:54:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:54:55 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 22:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.489 (still bad) 2013-Sep-24 22:54:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-24 22:54:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10496.00 2013-Sep-24 22:54:56 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 22:54:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 22:54:56 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:56 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 22:54:59 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:54:59.01 2013-Sep-24 22:54:59 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380077699.01 Tue Sep 24 22:54:59 2013 2013-Sep-24 22:54:59 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216986 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:55:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.489 (still bad) 2013-Sep-24 22:55:01 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-24 22:55:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 22:55:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 22:55:05 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 22:55:05 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 22:55:05 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 22:55:05 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 22:55:05 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-24 22:55:05 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-24 22:55:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:55:05 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-24 22:55:05 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-24 22:55:05 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 328.94 and ZA = 12.57 2013-Sep-24 22:55:05 LOG3 track_source: Calling 'track_source AGES7619_p1_111 328.94 12.5663461229 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 22:55:05 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 22:55:05 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_111} INFO {Slewing to source 'AGES7619_p1_111' ...} 2013-Sep-24 22:55:05 INFO1 track_source: Starting to track AGES7619_p1_111 2013-Sep-24 22:55:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_111" 2013-Sep-24 22:55:05 LOG3 vw_send: To DATATAKING: set ra 328.94 2013-Sep-24 22:55:05 LOG3 vw_send: To DATATAKING: set dec 12.5663461229 2013-Sep-24 22:55:05 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 22:55:05 LOG3 vw_send: To DATATAKING: pnt tr 328.94 12.5663461229 -CF 2013-Sep-24 22:55:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:55:05 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 22:55:05 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 22:55:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 22:55:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 22:55:05 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Sep-24 22:55:05 LOG1 fixed_driftmap: Parameters: HA = -00:26:00.2 Start = 22:44:43.4 LST = 22:44:26.1 diff = 17.4 secs 2013-Sep-24 22:55:05 INFO2 fixed_driftmap: Waiting 15.4 seconds for RA 23:10:44 2013-Sep-24 22:55:06 INFO2 lstwait: Waiting for 15.3 secs from LST 22:44:26 to LST 22:44:41 ... 2013-Sep-24 22:55:06 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.310626451030942 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 22:55:06 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-24 22:55:06 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_111" 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: set ra 328.94 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 328.94 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: set dec 12.5663461229 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: 12.5663461229 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: pnt tr 328.94 12.5663461229 -CF 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 22:55:06 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 22:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.070 (still bad) 2013-Sep-24 22:55:21 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-24 22:55:21 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Sep-24 22:55:21 LOG4 lstwait: Finished waiting 1.69 seconds late 2013-Sep-24 22:55:21 INFO3 lstwait: Finished waiting 2013-Sep-24 22:55:21 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 22:55:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-24 22:55:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-24 22:55:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-24 22:55:21 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-24 22:55:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 22:55:21 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Sep-24 22:55:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-24 22:55:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: object=AGES7619_p1_111 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 22:55:21 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: patternid=326700147 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: scanid=326700147 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: topoafreqhz=1456216986.0 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: topobfreqhz=1306216986.0 2013-Sep-24 22:55:22 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 22:55:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 22:55:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_111:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326700147:scanid=326700147:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216986.0:topobfreqhz=1306216986.0:filetype=1 2013-Sep-24 22:55:22 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 22:55:22 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2013-Sep-24 22:55:22 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 22:55:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 22:55:22 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2013-Sep-24 22:55:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 22:55:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 22:55:22 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-24 22:55:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 22:55:22 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Sep-24 22:55:22 LOG4 from_mock: From MOCK: starok 2013-Sep-24 22:55:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 22:55:22 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Sep-24 22:55:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 22:55:22 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326700147 2013-Sep-24 22:55:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 22:55:23 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2013-Sep-24 22:55:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 22:55:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 22:55:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 22:55:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-24 22:55:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10524.00 2013-Sep-24 22:55:24 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 22:55:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-24 22:55:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216986 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 22:55:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216986 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 22:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.094 (still bad) 2013-Sep-24 22:55:27 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 22:55:27.00 2013-Sep-24 22:55:27 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380077727.00 Tue Sep 24 22:55:27 2013 2013-Sep-24 22:55:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 22:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 22:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 22:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 22:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 22:55:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:55:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 0.934 0.979 0.968 2013-Sep-24 22:55:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.864 0.964 1.067 2013-Sep-24 22:55:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.032 0.925 0.069 2013-Sep-24 22:55:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.067 0.938 0.995 2013-Sep-24 22:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.117 (still bad) 2013-Sep-24 22:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 22:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 22:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 22:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 22:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.103 (still bad) 2013-Sep-24 22:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-24 22:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 22:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 22:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 22:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.073 (still bad) 2013-Sep-24 22:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.109 (still bad) 2013-Sep-24 22:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.078 (still bad) 2013-Sep-24 22:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 22:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 22:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 22:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-24 22:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.097 (still bad) 2013-Sep-24 22:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-24 22:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 22:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 22:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 22:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.061 (still bad) 2013-Sep-24 22:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.098 (still bad) 2013-Sep-24 22:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-24 22:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 22:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 22:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-24 22:56:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 22:56:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.932 0.988 0.977 2013-Sep-24 22:56:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.868 0.951 1.053 2013-Sep-24 22:56:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.054 1.030 0.921 0.068 2013-Sep-24 22:56:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 1.039 0.916 0.969 2013-Sep-24 22:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.097 (still bad) 2013-Sep-24 22:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-24 22:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 22:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 22:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 22:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-24 22:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.098 (still bad) 2013-Sep-24 22:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 22:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 22:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 22:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 22:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 22:57:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 22:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 22:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.088 (still bad) 2013-Sep-24 22:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 22:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 22:57:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 22:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 22:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 22:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.089 (still bad) 2013-Sep-24 22:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 22:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 22:57:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 22:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 22:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.089 (still bad) 2013-Sep-24 22:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.091 (still bad) 2013-Sep-24 22:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 22:57:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:57:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 0.974 1.023 1.004 2013-Sep-24 22:57:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 0.880 0.959 1.074 2013-Sep-24 22:57:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.048 0.928 0.069 2013-Sep-24 22:57:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.075 0.949 1.002 2013-Sep-24 22:57:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.078 (still bad) 2013-Sep-24 22:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 22:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 22:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.095 (still bad) 2013-Sep-24 22:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 22:57:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.082 (still bad) 2013-Sep-24 22:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 22:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 22:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 22:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 22:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:58:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.085 (still bad) 2013-Sep-24 22:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 22:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 22:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 22:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 22:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 22:58:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.083 (still bad) 2013-Sep-24 22:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 22:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 22:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 22:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 22:58:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.085 (still bad) 2013-Sep-24 22:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 22:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.095 (still bad) 2013-Sep-24 22:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.099 (still bad) 2013-Sep-24 22:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.119 (still bad) 2013-Sep-24 22:58:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:58:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 0.947 0.989 0.982 2013-Sep-24 22:58:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.878 0.965 1.068 2013-Sep-24 22:58:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.071 1.042 0.928 0.069 2013-Sep-24 22:58:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.069 0.937 0.997 2013-Sep-24 22:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.096 (still bad) 2013-Sep-24 22:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.072 and 1.102 (still bad) 2013-Sep-24 22:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.087 (still bad) 2013-Sep-24 22:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 22:58:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.115 (still bad) 2013-Sep-24 22:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 22:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 22:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.097 (still bad) 2013-Sep-24 22:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 22:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:59:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.083 (still bad) 2013-Sep-24 22:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 22:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.090 (still bad) 2013-Sep-24 22:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 22:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 22:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 22:59:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.081 (still bad) 2013-Sep-24 22:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 22:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.089 (still bad) 2013-Sep-24 22:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 22:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 22:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 22:59:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.079 (still bad) 2013-Sep-24 22:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 22:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.087 (still bad) 2013-Sep-24 22:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 22:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 22:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 22:59:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 22:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 22:59:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 22:59:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.954 0.993 0.986 2013-Sep-24 22:59:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 0.890 0.962 1.086 2013-Sep-24 22:59:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.055 0.936 0.069 2013-Sep-24 22:59:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 1.058 0.928 0.986 2013-Sep-24 22:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.091 (still bad) 2013-Sep-24 22:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 22:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 22:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 22:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 22:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 22:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 22:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.091 (still bad) 2013-Sep-24 22:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:00:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.084 (still bad) 2013-Sep-24 23:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.091 (still bad) 2013-Sep-24 23:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:00:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.079 (still bad) 2013-Sep-24 23:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.087 (still bad) 2013-Sep-24 23:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.098 (still bad) 2013-Sep-24 23:00:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.088 (still bad) 2013-Sep-24 23:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.112 (still bad) 2013-Sep-24 23:00:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.086 (still bad) 2013-Sep-24 23:00:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 23:00:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 0.960 0.996 0.986 2013-Sep-24 23:00:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 0.889 0.963 1.087 2013-Sep-24 23:00:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.057 0.943 0.070 2013-Sep-24 23:00:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.072 1.058 0.931 0.986 2013-Sep-24 23:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.113 (still bad) 2013-Sep-24 23:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.089 (still bad) 2013-Sep-24 23:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 23:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.113 (still bad) 2013-Sep-24 23:01:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.090 (still bad) 2013-Sep-24 23:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 23:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.115 (still bad) 2013-Sep-24 23:01:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.102 (still bad) 2013-Sep-24 23:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.113 (still bad) 2013-Sep-24 23:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.129 (still bad) 2013-Sep-24 23:01:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 23:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 23:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.131 (still bad) 2013-Sep-24 23:01:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.130 (still bad) 2013-Sep-24 23:01:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 23:01:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 0.969 0.999 0.989 2013-Sep-24 23:01:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.980 0.895 1.010 1.138 2013-Sep-24 23:01:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 1.058 0.939 0.070 2013-Sep-24 23:01:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 1.061 0.931 0.990 2013-Sep-24 23:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:01:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.125 (still bad) 2013-Sep-24 23:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.079 (still bad) 2013-Sep-24 23:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.095 (still bad) 2013-Sep-24 23:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:02:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 23:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:02:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 23:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.104 (still bad) 2013-Sep-24 23:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:02:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.099 (still bad) 2013-Sep-24 23:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.104 (still bad) 2013-Sep-24 23:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:02:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 23:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.101 (still bad) 2013-Sep-24 23:02:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:02:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.956 0.996 0.986 2013-Sep-24 23:02:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 0.883 0.967 1.073 2013-Sep-24 23:02:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.049 0.934 0.069 2013-Sep-24 23:02:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 1.052 0.929 0.980 2013-Sep-24 23:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:02:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 23:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.102 (still bad) 2013-Sep-24 23:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:03:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.099 (still bad) 2013-Sep-24 23:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.104 (still bad) 2013-Sep-24 23:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:03:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 23:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.103 (still bad) 2013-Sep-24 23:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:03:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.100 (still bad) 2013-Sep-24 23:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.105 (still bad) 2013-Sep-24 23:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.106 (still bad) 2013-Sep-24 23:03:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.089 (still bad) 2013-Sep-24 23:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 23:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:03:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:03:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 0.956 0.995 0.986 2013-Sep-24 23:03:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.872 0.961 1.068 2013-Sep-24 23:03:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 1.041 0.928 0.069 2013-Sep-24 23:03:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 1.048 0.923 0.977 2013-Sep-24 23:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.107 (still bad) 2013-Sep-24 23:03:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 23:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.104 (still bad) 2013-Sep-24 23:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.123 (still bad) 2013-Sep-24 23:04:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 23:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.100 (still bad) 2013-Sep-24 23:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.121 (still bad) 2013-Sep-24 23:04:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 23:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.101 (still bad) 2013-Sep-24 23:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.119 (still bad) 2013-Sep-24 23:04:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 23:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.099 (still bad) 2013-Sep-24 23:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.118 (still bad) 2013-Sep-24 23:04:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.128 (still bad) 2013-Sep-24 23:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.157 (still bad) 2013-Sep-24 23:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.161 (still bad) 2013-Sep-24 23:04:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:04:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.948 0.988 0.972 2013-Sep-24 23:04:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 0.871 0.959 1.062 2013-Sep-24 23:04:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 1.041 0.930 0.069 2013-Sep-24 23:04:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.160 1.145 1.008 1.069 2013-Sep-24 23:04:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.198 (still bad) 2013-Sep-24 23:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.151 (still bad) 2013-Sep-24 23:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.145 (still bad) 2013-Sep-24 23:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 23:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:05:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.117 (still bad) 2013-Sep-24 23:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 23:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.095 (still bad) 2013-Sep-24 23:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:05:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.118 (still bad) 2013-Sep-24 23:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 23:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.099 (still bad) 2013-Sep-24 23:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:05:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.118 (still bad) 2013-Sep-24 23:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.091 (still bad) 2013-Sep-24 23:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 23:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:05:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.095 (still bad) 2013-Sep-24 23:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:05:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:05:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:05:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.955 0.996 0.982 2013-Sep-24 23:05:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.890 0.964 1.076 2013-Sep-24 23:05:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 1.048 0.935 0.069 2013-Sep-24 23:05:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 1.058 0.928 0.985 2013-Sep-24 23:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 23:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.096 (still bad) 2013-Sep-24 23:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:06:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 23:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 23:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:06:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.092 (still bad) 2013-Sep-24 23:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:06:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:06:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:06:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:06:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:06:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 0.937 0.986 0.974 2013-Sep-24 23:06:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 0.870 0.959 1.061 2013-Sep-24 23:06:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.037 0.929 0.069 2013-Sep-24 23:06:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.042 0.919 0.970 2013-Sep-24 23:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.073 (still bad) 2013-Sep-24 23:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.099 (still bad) 2013-Sep-24 23:07:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.079 (still bad) 2013-Sep-24 23:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.084 (still bad) 2013-Sep-24 23:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.100 (still bad) 2013-Sep-24 23:07:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-24 23:07:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.105 (still bad) 2013-Sep-24 23:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.085 (still bad) 2013-Sep-24 23:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:07:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.080 and 1.101 (still bad) 2013-Sep-24 23:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.093 (still bad) 2013-Sep-24 23:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:07:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.103 (still bad) 2013-Sep-24 23:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:07:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 23:07:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 0.958 0.996 0.990 2013-Sep-24 23:07:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 0.892 0.971 1.086 2013-Sep-24 23:07:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 1.061 0.940 0.070 2013-Sep-24 23:07:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 1.060 0.931 0.989 2013-Sep-24 23:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.093 (still bad) 2013-Sep-24 23:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:08:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.103 (still bad) 2013-Sep-24 23:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.088 (still bad) 2013-Sep-24 23:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 23:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:08:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.102 (still bad) 2013-Sep-24 23:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.084 (still bad) 2013-Sep-24 23:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.091 (still bad) 2013-Sep-24 23:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:08:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.081 and 1.105 (still bad) 2013-Sep-24 23:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.089 (still bad) 2013-Sep-24 23:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:08:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:08:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:08:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:08:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 0.951 0.994 0.981 2013-Sep-24 23:08:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.881 0.960 1.072 2013-Sep-24 23:08:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.046 0.932 0.069 2013-Sep-24 23:08:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 1.049 0.921 0.978 2013-Sep-24 23:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:09:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:09:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:09:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:09:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:09:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:09:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:09:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 0.941 0.984 0.969 2013-Sep-24 23:09:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 0.881 0.966 1.080 2013-Sep-24 23:09:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 1.052 0.937 0.069 2013-Sep-24 23:09:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 1.047 0.921 0.976 2013-Sep-24 23:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:10:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:10:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:10:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:10:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.088 (still bad) 2013-Sep-24 23:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:10:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:10:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.073 (still bad) 2013-Sep-24 23:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:10:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:10:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.936 0.985 0.972 2013-Sep-24 23:10:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 0.872 0.960 1.061 2013-Sep-24 23:10:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 1.036 0.928 0.069 2013-Sep-24 23:10:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 1.044 0.917 0.972 2013-Sep-24 23:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.083 (still bad) 2013-Sep-24 23:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-24 23:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-24 23:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.151 (still bad) 2013-Sep-24 23:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-24 23:11:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:11:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.129 0.986 0.983 0.972 2013-Sep-24 23:11:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.960 0.866 0.956 1.054 2013-Sep-24 23:11:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 1.032 0.923 0.069 2013-Sep-24 23:11:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 1.047 0.919 0.975 2013-Sep-24 23:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.110 (still bad) 2013-Sep-24 23:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.105 (still bad) 2013-Sep-24 23:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-24 23:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 23:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.060 (still bad) 2013-Sep-24 23:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.097 (still bad) 2013-Sep-24 23:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.062 (still bad) 2013-Sep-24 23:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.058 (still bad) 2013-Sep-24 23:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.095 (still bad) 2013-Sep-24 23:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 23:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.062 (still bad) 2013-Sep-24 23:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.060 (still bad) 2013-Sep-24 23:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.096 (still bad) 2013-Sep-24 23:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-24 23:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-24 23:13:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.078 < 0.75)! 2013-Sep-24 23:13:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.968 1.014 0.992 2013-Sep-24 23:13:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.893 0.985 1.094 2013-Sep-24 23:13:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 1.067 0.954 0.078 2013-Sep-24 23:13:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.069 0.949 0.997 2013-Sep-24 23:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-24 23:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.062 (still bad) 2013-Sep-24 23:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.100 (still bad) 2013-Sep-24 23:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-24 23:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.062 (still bad) 2013-Sep-24 23:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.100 (still bad) 2013-Sep-24 23:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-24 23:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.081 (still bad) 2013-Sep-24 23:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 23:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.063 (still bad) 2013-Sep-24 23:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:14:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:14:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.062 0.932 0.978 0.966 2013-Sep-24 23:14:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 0.868 0.957 1.054 2013-Sep-24 23:14:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 1.032 0.933 0.069 2013-Sep-24 23:14:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 1.039 0.919 0.968 2013-Sep-24 23:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-24 23:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.066 (still bad) 2013-Sep-24 23:14:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-24 23:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-24 23:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.067 (still bad) 2013-Sep-24 23:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-24 23:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-24 23:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:15:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:15:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 0.936 0.982 0.970 2013-Sep-24 23:15:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.872 0.960 1.062 2013-Sep-24 23:15:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 1.034 0.926 0.069 2013-Sep-24 23:15:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 1.041 0.919 0.971 2013-Sep-24 23:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-24 23:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-24 23:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-24 23:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-24 23:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-24 23:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-24 23:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-24 23:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-24 23:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-24 23:15:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 23:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 23:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 23:15:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 23:15:28 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 23:15:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 23:15:28 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2013-Sep-24 23:15:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 23:15:28 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Sep-24 23:15:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-24 23:15:28 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2013-Sep-24 23:15:28 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-24 23:15:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 23:15:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-24 23:15:28 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2013-Sep-24 23:15:28 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2013-Sep-24 23:15:28 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES7619_p1_109) < 230743 THEN' 2013-Sep-24 23:15:30 LOG3 is_if_valid: Current source data: up 352.4 10.9 UP - - 73 1.0 2013-Sep-24 23:15:30 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_109) < 230743 2013-Sep-24 23:15:30 INFO5 is_if_valid: Condition parsed as: 23.097890666666665 < 23.128611111111113 2013-Sep-24 23:15:30 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=356.04 alfaangle=22.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_109 ra=231000.00 dec=72800.00' 2013-Sep-24 23:15:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-24 23:15:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 23:15:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 356.04 22.3 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_109 231000.00 72800.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:15:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-24 23:15:30 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2013-Sep-24 23:15:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_111' 2013-Sep-24 23:15:30 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-24 23:15:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_109} 2013-Sep-24 23:15:31 INFO3 fixed_driftmap: Sending telescope to Az = 356.04 and ZA = 10.83 2013-Sep-24 23:15:31 LOG3 track_source: Calling 'track_source AGES7619_p1_109 356.04 10.8330943554 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:15:31 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 23:15:31 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2013-Sep-24 23:15:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_109} INFO {Slewing to source 'AGES7619_p1_109' ...} 2013-Sep-24 23:15:31 INFO1 track_source: Starting to track AGES7619_p1_109 2013-Sep-24 23:15:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_109" 2013-Sep-24 23:15:31 LOG3 vw_send: To DATATAKING: set ra 356.04 2013-Sep-24 23:15:31 LOG3 vw_send: To DATATAKING: set dec 10.8330943554 2013-Sep-24 23:15:31 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 23:15:31 LOG3 vw_send: To DATATAKING: pnt tr 356.04 10.8330943554 -CF 2013-Sep-24 23:15:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:15:31 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 23:15:31 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2013-Sep-24 23:15:31 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 23:15:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:15:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 23:15:31 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2013-Sep-24 23:15:31 START begin_task: Starting task 'rotate ALFA to +22.3 degrees' 2013-Sep-24 23:15:31 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Sep-24 23:15:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +22.3 degrees ...} 2013-Sep-24 23:15:31 INFO2 rotate_alfa: ALFA commanded to +22.3 degrees 2013-Sep-24 23:15:31 LOG3 sock_errsend: To ALFAMOTOR: POSITION 22.3 REPLY 2013-Sep-24 23:15:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-24 23:15:31 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-24 23:15:31 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Sep-24 23:15:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_109" 2013-Sep-24 23:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.065 (still bad) 2013-Sep-24 23:15:31 LOG4 got_cormsg: From DATATAKING: set ra 356.04 2013-Sep-24 23:15:31 LOG4 got_cormsg: From DATATAKING: vw% 356.04 2013-Sep-24 23:15:31 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 23:15:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:15:31 LOG4 got_cormsg: From DATATAKING: set dec 10.8330943554 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: 10.8330943554 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: pnt tr 356.04 10.8330943554 -CF 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:15:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 23:15:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-24 23:15:45 INFO3 alfa_motor: ALFA rotator in-position +22.30 degrees 2013-Sep-24 23:15:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-24 23:15:45 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Sep-24 23:15:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:15:45 STOP finish_task: Finishing task 'rotate ALFA to +22.3 degrees' 2013-Sep-24 23:15:45 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Sep-24 23:15:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to +22.3 degrees 2013-Sep-24 23:15:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:15:45 STOP end_task: Finishing task 'rotate ALFA to +22.3 degrees' with status 'OK' 2013-Sep-24 23:15:45 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Sep-24 23:15:45 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 23:15:45 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Sep-24 23:15:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 23:15:45 LOG3 waittrk: Start waittrk 5 2013-Sep-24 23:15:46 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 23:15:46 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2013-Sep-24 23:15:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 23:15:51 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2013-Sep-24 23:15:51 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 23:15:51 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2013-Sep-24 23:16:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 23:16:52 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2013-Sep-24 23:16:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:16:52 INFO2 waittrk: Now tracking AGES7619_p1_109 2013-Sep-24 23:16:52 LOG4 waittrk: Current telescope position: Az = 355.70 ZA = 10.80 2013-Sep-24 23:16:53 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 23:16:53 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Sep-24 23:16:53 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 23:16:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:16:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 23:16:53 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Sep-24 23:16:53 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 23:16:53 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Sep-24 23:16:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 23:16:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 23:16:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:16:53 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 23:16:53 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Sep-24 23:16:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 23:16:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:16:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:16:54 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 23:16:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 23:16:54 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Sep-24 23:16:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 23:16:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:16:54 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 23:16:54 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:16:54 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2013-Sep-24 23:16:54 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:16:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:16:54 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2013-Sep-24 23:16:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:16:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 23:16:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:16:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:16:54 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:16:54 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2013-Sep-24 23:16:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:16:54 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:16:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:16:54 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2013-Sep-24 23:16:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:16:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:16:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 23:16:54 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Sep-24 23:16:54 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-24 23:16:54 INFO2 astwait: Waiting for 24 seconds from 03:16:54 to 03:17:18 UTC ... 2013-Sep-24 23:16:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 24 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 23:16:55 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-24 23:16:55 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2013-Sep-24 23:17:18 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-24 23:17:18 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2013-Sep-24 23:17:18 INFO3 astwait: Finished waiting 2013-Sep-24 23:17:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:17:18 LOG5 dopset_later: Calling 'dopset_later 60.708683782312761' 2013-Sep-24 23:17:18 INFO3 dopset_later: Setting Doppler correction for 23:18:18 (60.7 seconds from now) 2013-Sep-24 23:17:18 LOG5 antvel: Calling 'antvel 356.040000 10.833094 F Heliocentric 60.708683782312761' 2013-Sep-24 23:17:18 LOG2 antvel: Transforming current Az = 356.04 ZA = 10.83 to apparent RA = 23:10:43.5 Dec = +07:32:43.2 2013-Sep-24 23:17:18 LOG2 antvel: Parameters to Doppler: Heliocentric 98298 2013 267 0.0 2013-Sep-24 23:17:18 INFO5 antvel: Computed antenna velocity: +5.77995 km/s 2013-Sep-24 23:17:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=5.7799470166000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-24 23:17:18 INFO4 dopset_gen: New sky frequencies: 1381.216799 1381.216799 1381.216799 1381.216799 1381.216799 1381.216799 1381.216799 1381.216799 1381.216799 2013-Sep-24 23:17:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.216799 sky0=1381.216799 sky1=1381.216799 sky2=1381.216799 sky3=1381.216799 sky4=1381.216799 sky5=1381.216799 sky6=1381.216799 sky7=1381.216799 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 23:17:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.216799 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631216799.0} 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 23:17:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-24 23:17:18 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-24 23:17:18 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:04.1 Dec = +07:28:14.6 2013-Sep-24 23:17:18 LOG3 track_source: Calling 'track_source AGES7619_p1_109 230904.1 072814.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:17:18 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 23:17:18 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2013-Sep-24 23:17:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_109} INFO {Slewing to source 'AGES7619_p1_109' ...} 2013-Sep-24 23:17:18 INFO1 track_source: Starting to track AGES7619_p1_109 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_109" 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: set ra 230904.1 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: set dec 072814.6 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: pnt tr 230904.1 072814.6 -CJ 2013-Sep-24 23:17:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:17:18 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 23:17:19 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2013-Sep-24 23:17:19 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 23:17:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:17:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 23:17:19 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2013-Sep-24 23:17:19 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 23:17:19 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2013-Sep-24 23:17:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 23:17:19 LOG3 waittrk: Start waittrk 5 2013-Sep-24 23:17:19 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 23:17:19 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631216799.0} 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_109" 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: set ra 230904.1 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% 230904.1 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: set dec 072814.6 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: 072814.6 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: pnt tr 230904.1 072814.6 -CJ 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:17:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 23:17:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 23:17:24 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Sep-24 23:17:24 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 23:17:24 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2013-Sep-24 23:17:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 23:17:26 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2013-Sep-24 23:17:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:17:26 INFO2 waittrk: Now tracking AGES7619_p1_109 2013-Sep-24 23:17:26 LOG4 waittrk: Current telescope position: Az = 355.81 ZA = 10.80 2013-Sep-24 23:17:26 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 23:17:26 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2013-Sep-24 23:17:26 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 23:17:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:17:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 23:17:26 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2013-Sep-24 23:17:26 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-24 23:17:26 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Sep-24 23:17:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-24 23:17:26 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-24 23:17:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-24 23:17:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-24 23:17:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:17:27 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-24 23:17:27 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2013-Sep-24 23:17:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-24 23:17:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:17:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:29 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 23:17:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-24 23:17:29 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2013-Sep-24 23:17:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-24 23:17:30 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-24 23:17:30 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2013-Sep-24 23:17:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 23:17:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:17:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:17:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:17:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:17:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-24 23:17:30 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2013-Sep-24 23:17:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-24 23:17:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-24 23:17:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-24 23:17:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-24 23:17:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-24 23:17:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-24 23:17:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-24 23:17:30 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2013-Sep-24 23:17:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.070 0.964 ALFA beam 1: 0.978 0.970 2013-Sep-24 23:17:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.955 1.095 ALFA beam 3: 0.941 1.058 2013-Sep-24 23:17:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.043 1.029 ALFA beam 5: 0.934 0.068 2013-Sep-24 23:17:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.079 1.055 ALFA beam 7: 0.940 0.984 2013-Sep-24 23:17:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-24 23:17:30 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2013-Sep-24 23:17:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-24 23:17:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:17:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-24 23:17:31 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2013-Sep-24 23:17:31 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-24 23:17:31 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Sep-24 23:17:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 23:17:31 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-24 23:17:31 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-24 23:17:31 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-24 23:17:31 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2013-Sep-24 23:17:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:17:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 0.964 0.978 0.970 2013-Sep-24 23:17:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.095 0.941 1.058 2013-Sep-24 23:17:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.043 1.029 0.934 0.068 2013-Sep-24 23:17:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.055 0.940 0.984 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.3 27.5 B 28.9 29.1 mn:A 0.4 0.4 B 0.2 0.8 gn: 8 11 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.5 31.0 B 28.8 30.6 mn:A 1.0 0.4 B 0.3 0.0 gn: 10 12 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.9 28.8 B 31.8 26.7 mn:A 0.3 -0.3 B -0.1 1.0 gn: 10 8 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.8 27.5 B 28.8 28.8 mn:A 1.4 0.9 B 0.7 1.1 gn: 11 7 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.1 B 29.3 30.8 mn:A 0.2 -0.2 B 0.4 0.1 gn: 6 9 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.7 29.9 B 32.8 30.4 mn:A 0.1 -0.4 B -0.0 0.5 gn: 7 10 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.0 30.7 B 33.5 29.9 mn:A 0.2 -0.4 B -0.3 -0.2 gn: 9 11 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.0 30.3 B 30.4 31.7 mn:A -0.1 0.1 B 0.0 0.5 gn: 9 11 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b4s0g0 rms:A 28.9 28.1 B 30.0 30.2 mn:A -0.1 0.7 B 0.4 -0.4 gn: 4 6 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.3 30.2 B 31.5 30.3 mn:A 0.1 0.2 B -0.1 0.6 gn: 7 8 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.8 30.5 B 29.2 29.2 mn:A 0.8 -0.2 B 1.4 0.5 gn: 7 26 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.7 31.4 B 29.2 29.0 mn:A 0.9 -0.1 B -1.2 0.6 gn: 7 27 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.8 26.9 B 30.9 32.0 mn:A -0.1 1.5 B -0.4 -0.3 gn: 6 13 2013-Sep-24 23:17:36 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.4 28.2 B 30.5 30.7 mn:A 1.0 0.6 B -1.3 -0.8 gn: 8 14 2013-Sep-24 23:17:36 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-24 23:17:36 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2013-Sep-24 23:17:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-24 23:17:36 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-24 23:17:36 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-24 23:17:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:17:37 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-24 23:17:37 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 23:17:37 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-24 23:17:37 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-24 23:17:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:17:37 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-24 23:17:37 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:17:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:17:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:17:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:17:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-24 23:17:37 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-24 23:17:37 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-24 23:17:37 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 23:17:37 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 23:17:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 23:17:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:17:37 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 23:17:37 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2013-Sep-24 23:17:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 23:17:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 23:17:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:17:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:37 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 23:17:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 23:17:38 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 23:17:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:17:38 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 23:17:38 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:17:38 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:17:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:17:38 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:17:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 23:17:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:17:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:17:38 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:17:38 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:17:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20130924.a2048.0005.fits 2013-Sep-24 23:17:38 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:17:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:17:38 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:17:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:17:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 23:17:38 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-24 23:17:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-24 23:17:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-24 23:17:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 23:17:38 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Sep-24 23:17:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130924.a2048.0005.fits} 2013-Sep-24 23:17:38 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 23:17:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-24 23:17:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 23:17:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 23:17:39 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Sep-24 23:17:39 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-24 23:17:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 23:17:39 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2013-Sep-24 23:17:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-24 23:17:39 LOG5 log_alfabeam: Parameters: 23.151138888888887 7.470722222222224 23.117434 2013.7336634281442 22.299944 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 0 23.151138888888841 7.470722222222221 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 1 23.149900859005740 7.575523963098068 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 2 23.145319804260662 7.506419954344567 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 3 23.146517110928134 7.401505615897186 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 4 23.152392123245193 7.365947439263227 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 5 23.156996339126703 7.435695886846243 2013-Sep-24 23:17:39 LOG4 log_alfabeam: ALFABEAM 6 23.155702430923618 7.540353244181022 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: object=AGES7619_p1_109 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: patternid=326700147 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: scanid=326700148 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: topoafreqhz=1456216799.0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: topobfreqhz=1306216799.0 2013-Sep-24 23:17:39 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 23:17:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 23:17:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_109:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326700147:scanid=326700148:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216799.0:topobfreqhz=1306216799.0:filetype=1 2013-Sep-24 23:17:39 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 23:17:39 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2013-Sep-24 23:17:39 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 23:17:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 23:17:39 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2013-Sep-24 23:17:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 23:17:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 23:17:40 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 23:17:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 23:17:40 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2013-Sep-24 23:17:40 LOG4 from_mock: From MOCK: starok 2013-Sep-24 23:17:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 23:17:40 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2013-Sep-24 23:17:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 23:17:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700148 2013-Sep-24 23:17:40 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 23:17:40 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2013-Sep-24 23:17:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 23:17:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 23:17:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 23:17:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-24 23:17:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11861.00 2013-Sep-24 23:17:42 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 23:17:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 23:17:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:17:45.02 2013-Sep-24 23:17:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380079065.02 Tue Sep 24 23:17:45 2013 2013-Sep-24 23:17:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216799 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 23:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 23:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.506 (still bad) 2013-Sep-24 23:17:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 23:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:17:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 23:17:51 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 23:17:51 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 23:17:51 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2013-Sep-24 23:17:51 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 23:17:51 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2013-Sep-24 23:17:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-24 23:17:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 23:17:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 23:17:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 23:17:51 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2013-Sep-24 23:17:51 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 23:17:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 23:17:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 23:17:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 23:17:51 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2013-Sep-24 23:17:51 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-24 23:17:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 23:17:51 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2013-Sep-24 23:17:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-24 23:17:51 LOG5 log_alfabeam: Parameters: 23.151138888888887 7.470722222222224 23.121055 2013.7336638400893 22.299944 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 0 23.151138888888848 7.470722222222220 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 1 23.149934574466663 7.575610803600921 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 2 23.145331350661550 7.506833434052444 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 3 23.146494905505619 7.401835119607024 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 4 23.152358436834888 7.365859524513723 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 5 23.156985016030848 7.435279872405749 2013-Sep-24 23:17:51 LOG4 log_alfabeam: ALFABEAM 6 23.155724756396047 7.540028002474020 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: object=AGES7619_p1_109 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: patternid=326700147 2013-Sep-24 23:17:51 TEST take_mock_data: PSET configuration: scanid=326700149 2013-Sep-24 23:17:52 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 23:17:52 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 23:17:52 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 23:17:52 TEST take_mock_data: PSET configuration: topoafreqhz=1456216799.0 2013-Sep-24 23:17:52 TEST take_mock_data: PSET configuration: topobfreqhz=1306216799.0 2013-Sep-24 23:17:52 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 23:17:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 23:17:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_109:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326700147:scanid=326700149:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216799.0:topobfreqhz=1306216799.0:filetype=1 2013-Sep-24 23:17:52 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 23:17:52 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2013-Sep-24 23:17:52 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 23:17:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 23:17:52 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2013-Sep-24 23:17:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 23:17:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 23:17:52 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 23:17:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 23:17:52 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2013-Sep-24 23:17:52 LOG4 from_mock: From MOCK: starok 2013-Sep-24 23:17:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 23:17:52 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2013-Sep-24 23:17:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 23:17:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700149 2013-Sep-24 23:17:53 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 23:17:53 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2013-Sep-24 23:17:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 23:17:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 23:17:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 23:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.527 (still bad) 2013-Sep-24 23:17:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-24 23:17:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11874.00 2013-Sep-24 23:17:54 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 23:17:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 23:17:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:17:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:17:57.02 2013-Sep-24 23:17:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380079077.02 Tue Sep 24 23:17:57 2013 2013-Sep-24 23:17:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216799 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 23:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 23:17:59 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-24 23:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.082 and 1.527 (still bad) 2013-Sep-24 23:17:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 23:18:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:18:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 23:18:03 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 23:18:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 23:18:03 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2013-Sep-24 23:18:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 23:18:03 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2013-Sep-24 23:18:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 23:18:03 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-24 23:18:03 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2013-Sep-24 23:18:03 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-24 23:18:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:18:03 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-24 23:18:03 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2013-Sep-24 23:18:03 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-24 23:18:03 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 356.04 and ZA = 10.83 2013-Sep-24 23:18:03 LOG3 track_source: Calling 'track_source AGES7619_p1_109 356.04 10.8330943554 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:18:03 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 23:18:03 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2013-Sep-24 23:18:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_109} INFO {Slewing to source 'AGES7619_p1_109' ...} 2013-Sep-24 23:18:03 INFO1 track_source: Starting to track AGES7619_p1_109 2013-Sep-24 23:18:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_109" 2013-Sep-24 23:18:03 LOG3 vw_send: To DATATAKING: set ra 356.04 2013-Sep-24 23:18:03 LOG3 vw_send: To DATATAKING: set dec 10.8330943554 2013-Sep-24 23:18:03 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 23:18:03 LOG3 vw_send: To DATATAKING: pnt tr 356.04 10.8330943554 -CF 2013-Sep-24 23:18:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:18:03 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 23:18:03 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2013-Sep-24 23:18:03 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 23:18:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:18:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 23:18:03 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2013-Sep-24 23:18:04 LOG1 fixed_driftmap: Parameters: HA = -00:03:00.0 Start = 23:07:43.6 LST = 23:07:27.8 diff = 15.8 secs 2013-Sep-24 23:18:04 INFO2 fixed_driftmap: Waiting 13.8 seconds for RA 23:10:44 2013-Sep-24 23:18:04 INFO2 lstwait: Waiting for 13.7 secs from LST 23:07:28 to LST 23:07:42 ... 2013-Sep-24 23:18:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.714946783283445 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 23:18:04 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-24 23:18:04 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_109" 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: set ra 356.04 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: vw% 356.04 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: set dec 10.8330943554 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: 10.8330943554 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: pnt tr 356.04 10.8330943554 -CF 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:18:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 23:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:18:17 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-24 23:18:17 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Sep-24 23:18:17 LOG4 lstwait: Finished waiting 1.29 seconds late 2013-Sep-24 23:18:17 INFO3 lstwait: Finished waiting 2013-Sep-24 23:18:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:18:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-24 23:18:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-24 23:18:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-24 23:18:18 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-24 23:18:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 23:18:18 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Sep-24 23:18:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-24 23:18:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: object=AGES7619_p1_109 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: patternid=326700150 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: scanid=326700150 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: topoafreqhz=1456216799.0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: topobfreqhz=1306216799.0 2013-Sep-24 23:18:18 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 23:18:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 23:18:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_109:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326700150:scanid=326700150:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216799.0:topobfreqhz=1306216799.0:filetype=1 2013-Sep-24 23:18:18 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 23:18:18 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2013-Sep-24 23:18:18 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 23:18:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 23:18:18 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2013-Sep-24 23:18:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 23:18:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 23:18:18 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-24 23:18:18 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 23:18:18 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2013-Sep-24 23:18:19 LOG4 from_mock: From MOCK: starok 2013-Sep-24 23:18:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 23:18:19 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2013-Sep-24 23:18:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 23:18:19 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326700150 2013-Sep-24 23:18:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 23:18:19 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2013-Sep-24 23:18:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 23:18:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 23:18:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 23:18:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-24 23:18:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11900.00 2013-Sep-24 23:18:21 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 23:18:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-24 23:18:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216799 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216799 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:18:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:18:24.01 2013-Sep-24 23:18:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380079104.01 Tue Sep 24 23:18:24 2013 2013-Sep-24 23:18:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 23:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 23:18:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.180 (still bad) 2013-Sep-24 23:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-24 23:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-24 23:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-24 23:18:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:18:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.064 0.931 0.979 0.979 2013-Sep-24 23:18:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.095 0.994 1.112 2013-Sep-24 23:18:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.032 0.939 0.069 2013-Sep-24 23:18:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.130 1.107 0.983 1.033 2013-Sep-24 23:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 23:18:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.181 (still bad) 2013-Sep-24 23:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.162 (still bad) 2013-Sep-24 23:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.181 (still bad) 2013-Sep-24 23:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.188 (still bad) 2013-Sep-24 23:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.169 (still bad) 2013-Sep-24 23:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.145 (still bad) 2013-Sep-24 23:18:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.104 (still bad) 2013-Sep-24 23:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-24 23:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.214 (still bad) 2013-Sep-24 23:19:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.276 (still bad) 2013-Sep-24 23:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.305 (still bad) 2013-Sep-24 23:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.320 (still bad) 2013-Sep-24 23:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.288 (still bad) 2013-Sep-24 23:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.215 (still bad) 2013-Sep-24 23:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.147 (still bad) 2013-Sep-24 23:19:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.114 (still bad) 2013-Sep-24 23:19:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.106 (still bad) 2013-Sep-24 23:19:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.110 (still bad) 2013-Sep-24 23:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.109 (still bad) 2013-Sep-24 23:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 23:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.136 (still bad) 2013-Sep-24 23:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.125 (still bad) 2013-Sep-24 23:19:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:19:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.937 0.984 0.986 2013-Sep-24 23:19:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.976 1.124 0.943 1.056 2013-Sep-24 23:19:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 1.034 0.935 0.068 2013-Sep-24 23:19:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.058 0.938 0.986 2013-Sep-24 23:19:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.124 (still bad) 2013-Sep-24 23:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.112 (still bad) 2013-Sep-24 23:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.115 (still bad) 2013-Sep-24 23:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:19:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.116 (still bad) 2013-Sep-24 23:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:20:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.107 (still bad) 2013-Sep-24 23:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:20:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.125 (still bad) 2013-Sep-24 23:20:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.125 (still bad) 2013-Sep-24 23:20:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:20:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 0.936 0.984 0.981 2013-Sep-24 23:20:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 1.092 0.946 1.051 2013-Sep-24 23:20:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.028 0.935 0.068 2013-Sep-24 23:20:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.058 0.937 0.987 2013-Sep-24 23:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.124 (still bad) 2013-Sep-24 23:20:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.120 (still bad) 2013-Sep-24 23:21:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:21:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.123 (still bad) 2013-Sep-24 23:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:21:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:21:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.139 (still bad) 2013-Sep-24 23:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:21:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.087 (still bad) 2013-Sep-24 23:21:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.129 (still bad) 2013-Sep-24 23:21:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:21:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 0.952 0.977 0.972 2013-Sep-24 23:21:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.087 0.944 1.049 2013-Sep-24 23:21:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.049 1.025 0.935 0.068 2013-Sep-24 23:21:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.057 0.938 0.986 2013-Sep-24 23:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:21:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.087 (still bad) 2013-Sep-24 23:21:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.118 (still bad) 2013-Sep-24 23:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.116 (still bad) 2013-Sep-24 23:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 23:22:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.115 (still bad) 2013-Sep-24 23:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 23:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.125 (still bad) 2013-Sep-24 23:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.109 (still bad) 2013-Sep-24 23:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:22:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.116 (still bad) 2013-Sep-24 23:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:22:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.113 (still bad) 2013-Sep-24 23:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:22:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:22:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:22:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 0.948 0.994 1.001 2013-Sep-24 23:22:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.111 0.950 1.066 2013-Sep-24 23:22:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.053 0.945 0.069 2013-Sep-24 23:22:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 1.078 0.951 1.004 2013-Sep-24 23:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.110 (still bad) 2013-Sep-24 23:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:22:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.108 (still bad) 2013-Sep-24 23:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:23:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.108 (still bad) 2013-Sep-24 23:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:23:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.103 (still bad) 2013-Sep-24 23:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:23:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.106 (still bad) 2013-Sep-24 23:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.124 (still bad) 2013-Sep-24 23:23:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:23:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:23:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 0.949 0.997 0.997 2013-Sep-24 23:23:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.097 0.950 1.056 2013-Sep-24 23:23:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 1.036 0.942 0.068 2013-Sep-24 23:23:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 1.058 0.951 0.997 2013-Sep-24 23:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.121 (still bad) 2013-Sep-24 23:23:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:23:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.120 (still bad) 2013-Sep-24 23:24:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-24 23:24:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.119 (still bad) 2013-Sep-24 23:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-24 23:24:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.119 (still bad) 2013-Sep-24 23:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:24:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.121 (still bad) 2013-Sep-24 23:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:24:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:24:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 0.938 0.984 0.984 2013-Sep-24 23:24:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.097 0.949 1.055 2013-Sep-24 23:24:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 1.033 0.937 0.069 2013-Sep-24 23:24:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 1.057 0.937 0.985 2013-Sep-24 23:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:24:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.119 (still bad) 2013-Sep-24 23:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:24:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:25:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.121 (still bad) 2013-Sep-24 23:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:25:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.113 (still bad) 2013-Sep-24 23:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.105 (still bad) 2013-Sep-24 23:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:25:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.110 (still bad) 2013-Sep-24 23:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.100 (still bad) 2013-Sep-24 23:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:25:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-24 23:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:25:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:25:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:25:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 0.938 0.982 0.978 2013-Sep-24 23:25:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 1.092 0.945 1.048 2013-Sep-24 23:25:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 1.027 0.938 0.068 2013-Sep-24 23:25:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 1.055 0.942 0.982 2013-Sep-24 23:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:25:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.087 (still bad) 2013-Sep-24 23:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:25:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.107 (still bad) 2013-Sep-24 23:26:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-24 23:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.101 (still bad) 2013-Sep-24 23:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.108 (still bad) 2013-Sep-24 23:26:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.104 (still bad) 2013-Sep-24 23:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.107 (still bad) 2013-Sep-24 23:26:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.087 (still bad) 2013-Sep-24 23:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:26:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.098 (still bad) 2013-Sep-24 23:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.086 (still bad) 2013-Sep-24 23:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:26:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:26:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 23:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:26:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:26:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.960 1.013 1.001 2013-Sep-24 23:26:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.091 0.944 1.046 2013-Sep-24 23:26:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.048 1.026 0.937 0.068 2013-Sep-24 23:26:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 1.054 0.939 0.981 2013-Sep-24 23:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.121 (still bad) 2013-Sep-24 23:27:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-24 23:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.117 (still bad) 2013-Sep-24 23:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.097 (still bad) 2013-Sep-24 23:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.086 (still bad) 2013-Sep-24 23:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.085 (still bad) 2013-Sep-24 23:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.095 (still bad) 2013-Sep-24 23:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.087 (still bad) 2013-Sep-24 23:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.094 (still bad) 2013-Sep-24 23:27:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:27:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:27:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 0.950 0.981 0.977 2013-Sep-24 23:27:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 1.093 0.946 1.047 2013-Sep-24 23:27:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 1.030 0.940 0.068 2013-Sep-24 23:27:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.050 0.941 0.979 2013-Sep-24 23:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.105 (still bad) 2013-Sep-24 23:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.136 (still bad) 2013-Sep-24 23:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.166 (still bad) 2013-Sep-24 23:27:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.173 (still bad) 2013-Sep-24 23:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.173 (still bad) 2013-Sep-24 23:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.167 (still bad) 2013-Sep-24 23:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.141 (still bad) 2013-Sep-24 23:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.110 (still bad) 2013-Sep-24 23:28:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.110 (still bad) 2013-Sep-24 23:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.124 (still bad) 2013-Sep-24 23:28:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.145 (still bad) 2013-Sep-24 23:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.153 (still bad) 2013-Sep-24 23:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.178 (still bad) 2013-Sep-24 23:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.189 (still bad) 2013-Sep-24 23:28:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.177 (still bad) 2013-Sep-24 23:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.167 (still bad) 2013-Sep-24 23:28:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.152 (still bad) 2013-Sep-24 23:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.126 (still bad) 2013-Sep-24 23:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 23:28:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.113 (still bad) 2013-Sep-24 23:28:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.135 (still bad) 2013-Sep-24 23:28:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.110 (still bad) 2013-Sep-24 23:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:28:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.128 (still bad) 2013-Sep-24 23:28:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:28:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:28:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.935 0.985 0.988 2013-Sep-24 23:28:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.096 0.952 1.049 2013-Sep-24 23:28:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.051 1.029 0.940 0.068 2013-Sep-24 23:28:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 1.052 0.940 0.980 2013-Sep-24 23:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.129 (still bad) 2013-Sep-24 23:29:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:29:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.125 (still bad) 2013-Sep-24 23:29:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:29:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.132 (still bad) 2013-Sep-24 23:29:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:29:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.108 (still bad) 2013-Sep-24 23:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.146 (still bad) 2013-Sep-24 23:29:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:29:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.127 (still bad) 2013-Sep-24 23:29:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:29:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:29:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 0.941 1.007 1.005 2013-Sep-24 23:29:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.107 0.954 1.066 2013-Sep-24 23:29:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.056 1.050 0.950 0.069 2013-Sep-24 23:29:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 1.066 0.950 0.994 2013-Sep-24 23:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:29:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:30:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.130 (still bad) 2013-Sep-24 23:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.106 (still bad) 2013-Sep-24 23:30:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.120 (still bad) 2013-Sep-24 23:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.115 (still bad) 2013-Sep-24 23:30:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:30:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-24 23:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.115 (still bad) 2013-Sep-24 23:30:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.106 (still bad) 2013-Sep-24 23:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:30:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.112 (still bad) 2013-Sep-24 23:30:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:30:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:30:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 23:30:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.943 0.998 1.000 2013-Sep-24 23:30:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.110 0.960 1.070 2013-Sep-24 23:30:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 1.055 0.950 0.070 2013-Sep-24 23:30:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 1.067 0.951 0.998 2013-Sep-24 23:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-24 23:31:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.111 (still bad) 2013-Sep-24 23:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:31:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.113 (still bad) 2013-Sep-24 23:31:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:31:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:31:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.111 (still bad) 2013-Sep-24 23:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-24 23:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:31:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:31:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.108 (still bad) 2013-Sep-24 23:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:31:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:31:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:31:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:31:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 0.938 0.996 0.997 2013-Sep-24 23:31:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.103 0.951 1.056 2013-Sep-24 23:31:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.055 1.039 0.941 0.068 2013-Sep-24 23:31:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 1.067 0.952 0.998 2013-Sep-24 23:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.129 (still bad) 2013-Sep-24 23:32:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:32:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.128 (still bad) 2013-Sep-24 23:32:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:32:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.103 (still bad) 2013-Sep-24 23:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.130 (still bad) 2013-Sep-24 23:32:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:32:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.129 (still bad) 2013-Sep-24 23:32:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 23:32:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:32:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.129 (still bad) 2013-Sep-24 23:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:32:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:32:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:32:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 0.934 0.991 0.991 2013-Sep-24 23:32:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.106 0.955 1.060 2013-Sep-24 23:32:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.045 0.946 0.069 2013-Sep-24 23:32:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 1.064 0.947 0.992 2013-Sep-24 23:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:33:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.127 (still bad) 2013-Sep-24 23:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:33:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:33:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.128 (still bad) 2013-Sep-24 23:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:33:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:33:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.126 (still bad) 2013-Sep-24 23:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:33:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:33:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 23:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.110 (still bad) 2013-Sep-24 23:33:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-24 23:33:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.112 (still bad) 2013-Sep-24 23:33:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:34:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:34:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.927 0.982 0.984 2013-Sep-24 23:34:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 1.098 0.950 1.052 2013-Sep-24 23:34:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.035 0.944 0.068 2013-Sep-24 23:34:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 1.055 0.941 0.984 2013-Sep-24 23:34:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.112 (still bad) 2013-Sep-24 23:34:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-24 23:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:34:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.113 (still bad) 2013-Sep-24 23:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:34:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:34:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.113 (still bad) 2013-Sep-24 23:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:34:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:34:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.108 (still bad) 2013-Sep-24 23:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:34:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:34:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.106 (still bad) 2013-Sep-24 23:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:35:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:35:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.059 0.932 0.981 0.980 2013-Sep-24 23:35:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.097 0.997 1.098 2013-Sep-24 23:35:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.041 1.032 0.943 0.068 2013-Sep-24 23:35:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.057 0.941 0.986 2013-Sep-24 23:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.113 (still bad) 2013-Sep-24 23:35:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.115 (still bad) 2013-Sep-24 23:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:35:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.122 (still bad) 2013-Sep-24 23:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.102 (still bad) 2013-Sep-24 23:35:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.092 (still bad) 2013-Sep-24 23:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.122 (still bad) 2013-Sep-24 23:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-24 23:35:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.126 (still bad) 2013-Sep-24 23:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:35:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.089 (still bad) 2013-Sep-24 23:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.123 (still bad) 2013-Sep-24 23:36:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-24 23:36:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 0.928 0.976 0.973 2013-Sep-24 23:36:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 1.092 0.954 1.048 2013-Sep-24 23:36:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.037 1.027 0.943 0.068 2013-Sep-24 23:36:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 1.045 0.939 0.974 2013-Sep-24 23:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:36:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.091 (still bad) 2013-Sep-24 23:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.125 (still bad) 2013-Sep-24 23:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:36:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.095 (still bad) 2013-Sep-24 23:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.090 (still bad) 2013-Sep-24 23:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.124 (still bad) 2013-Sep-24 23:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.100 (still bad) 2013-Sep-24 23:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:36:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.094 (still bad) 2013-Sep-24 23:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.123 (still bad) 2013-Sep-24 23:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:36:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.093 (still bad) 2013-Sep-24 23:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.125 (still bad) 2013-Sep-24 23:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.107 (still bad) 2013-Sep-24 23:36:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.098 (still bad) 2013-Sep-24 23:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.097 (still bad) 2013-Sep-24 23:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.119 (still bad) 2013-Sep-24 23:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:37:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:37:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.932 0.989 0.989 2013-Sep-24 23:37:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.962 1.105 0.954 1.059 2013-Sep-24 23:37:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.039 1.045 0.954 0.069 2013-Sep-24 23:37:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.054 0.947 0.983 2013-Sep-24 23:37:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.108 (still bad) 2013-Sep-24 23:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 23:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.096 (still bad) 2013-Sep-24 23:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.110 (still bad) 2013-Sep-24 23:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.130 (still bad) 2013-Sep-24 23:37:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.099 (still bad) 2013-Sep-24 23:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:37:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.104 (still bad) 2013-Sep-24 23:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.135 (still bad) 2013-Sep-24 23:37:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.111 (still bad) 2013-Sep-24 23:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:37:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.113 (still bad) 2013-Sep-24 23:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.137 (still bad) 2013-Sep-24 23:37:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:37:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.119 (still bad) 2013-Sep-24 23:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 23:38:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:38:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:38:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 23:38:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.931 1.001 0.998 2013-Sep-24 23:38:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.115 0.967 1.073 2013-Sep-24 23:38:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.045 1.059 0.959 0.070 2013-Sep-24 23:38:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 1.057 0.947 0.985 2013-Sep-24 23:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:38:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:38:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 23:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.122 (still bad) 2013-Sep-24 23:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.122 (still bad) 2013-Sep-24 23:38:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 23:38:25 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 23:38:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 23:38:25 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2013-Sep-24 23:38:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 23:38:25 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Sep-24 23:38:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-24 23:38:25 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2013-Sep-24 23:38:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-24 23:38:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-24 23:38:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-24 23:38:25 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2013-Sep-24 23:38:25 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2013-Sep-24 23:38:25 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES7619_p1_107) < 233043 THEN' 2013-Sep-24 23:38:27 LOG3 is_if_valid: Current source data: up 381.8 11.5 UP - - 50 1.1 2013-Sep-24 23:38:27 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES7619_p1_107) < 233043 2013-Sep-24 23:38:27 INFO5 is_if_valid: Condition parsed as: 23.483105333333334 < 23.511944444444445 2013-Sep-24 23:38:27 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=24.97 alfaangle=-1.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES7619_p1_107 ra=231000.00 dec=73100.00' 2013-Sep-24 23:38:27 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-24 23:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.122 (still bad) 2013-Sep-24 23:38:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-24 23:38:27 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 24.97 -1.7 hcorcal 5 tracking no off lcorcal first 1 AGES7619_p1_107 231000.00 73100.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:38:27 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-24 23:38:27 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2013-Sep-24 23:38:27 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_109' 2013-Sep-24 23:38:27 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-24 23:38:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES7619_p1_107} 2013-Sep-24 23:38:28 INFO3 fixed_driftmap: Sending telescope to Az = 24.97 and ZA = 11.81 2013-Sep-24 23:38:28 LOG3 track_source: Calling 'track_source AGES7619_p1_107 24.97 11.8064947609 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:38:28 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 23:38:28 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Sep-24 23:38:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_107} INFO {Slewing to source 'AGES7619_p1_107' ...} 2013-Sep-24 23:38:28 INFO1 track_source: Starting to track AGES7619_p1_107 2013-Sep-24 23:38:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_107" 2013-Sep-24 23:38:28 LOG3 vw_send: To DATATAKING: set ra 24.97 2013-Sep-24 23:38:28 LOG3 vw_send: To DATATAKING: set dec 11.8064947609 2013-Sep-24 23:38:28 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 23:38:28 LOG3 vw_send: To DATATAKING: pnt tr 24.97 11.8064947609 -CF 2013-Sep-24 23:38:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:38:28 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 23:38:28 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Sep-24 23:38:28 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 23:38:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:38:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 23:38:28 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Sep-24 23:38:28 START begin_task: Starting task 'rotate ALFA to -1.7 degrees' 2013-Sep-24 23:38:28 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Sep-24 23:38:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -1.7 degrees ...} 2013-Sep-24 23:38:28 INFO2 rotate_alfa: ALFA commanded to -1.7 degrees 2013-Sep-24 23:38:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION -1.7 REPLY 2013-Sep-24 23:38:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-24 23:38:28 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-24 23:38:28 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_107" 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: set ra 24.97 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: vw% 24.97 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: set dec 11.8064947609 2013-Sep-24 23:38:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 23:38:29 LOG4 got_cormsg: From DATATAKING: 11.8064947609 2013-Sep-24 23:38:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:38:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:38:29 LOG4 got_cormsg: From DATATAKING: pnt tr 24.97 11.8064947609 -CF 2013-Sep-24 23:38:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:38:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 23:38:43 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-24 23:38:43 INFO3 alfa_motor: ALFA rotator in-position -1.70 degrees 2013-Sep-24 23:38:43 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-24 23:38:43 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Sep-24 23:38:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:38:43 STOP finish_task: Finishing task 'rotate ALFA to -1.7 degrees' 2013-Sep-24 23:38:43 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Sep-24 23:38:43 INFO2 finish_task: DONE finished configuration: rotating ALFA to -1.7 degrees 2013-Sep-24 23:38:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:38:43 STOP end_task: Finishing task 'rotate ALFA to -1.7 degrees' with status 'OK' 2013-Sep-24 23:38:43 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Sep-24 23:38:43 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 23:38:43 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Sep-24 23:38:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 23:38:43 LOG3 waittrk: Start waittrk 5 2013-Sep-24 23:38:43 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 23:38:43 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2013-Sep-24 23:38:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 23:38:48 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2013-Sep-24 23:38:49 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 23:38:49 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2013-Sep-24 23:39:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 23:39:53 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2013-Sep-24 23:39:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:39:53 INFO2 waittrk: Now tracking AGES7619_p1_107 2013-Sep-24 23:39:53 LOG4 waittrk: Current telescope position: Az = 384.70 ZA = 11.78 2013-Sep-24 23:39:53 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 23:39:53 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Sep-24 23:39:53 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 23:39:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:39:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 23:39:54 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Sep-24 23:39:54 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 23:39:54 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Sep-24 23:39:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 23:39:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 23:39:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:39:54 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 23:39:54 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2013-Sep-24 23:39:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 23:39:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:39:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:39:55 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 23:39:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 23:39:55 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2013-Sep-24 23:39:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 23:39:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:39:55 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 23:39:55 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:39:55 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2013-Sep-24 23:39:55 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:39:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:39:55 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2013-Sep-24 23:39:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:39:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 23:39:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:39:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:39:55 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:39:55 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2013-Sep-24 23:39:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:39:55 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:39:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:39:55 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2013-Sep-24 23:39:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:39:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:39:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 23:39:55 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Sep-24 23:39:55 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-24 23:39:55 INFO2 astwait: Waiting for 19 seconds from 03:39:55 to 03:40:14 UTC ... 2013-Sep-24 23:39:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 23:39:56 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-24 23:39:56 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2013-Sep-24 23:40:14 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-24 23:40:14 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2013-Sep-24 23:40:14 INFO3 astwait: Finished waiting 2013-Sep-24 23:40:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:40:14 LOG5 dopset_later: Calling 'dopset_later 60.745216639897052' 2013-Sep-24 23:40:14 INFO3 dopset_later: Setting Doppler correction for 23:41:14 (60.7 seconds from now) 2013-Sep-24 23:40:14 LOG5 antvel: Calling 'antvel 24.970000 11.806495 F Heliocentric 60.745216639897052' 2013-Sep-24 23:40:14 LOG2 antvel: Transforming current Az = 24.97 ZA = 11.81 to apparent RA = 23:10:43.5 Dec = +07:35:43.2 2013-Sep-24 23:40:14 LOG2 antvel: Parameters to Doppler: Heliocentric 99674 2013 267 0.0 2013-Sep-24 23:40:14 INFO5 antvel: Computed antenna velocity: +5.82057 km/s 2013-Sep-24 23:40:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=5.8205734176000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-24 23:40:14 INFO4 dopset_gen: New sky frequencies: 1381.216612 1381.216612 1381.216612 1381.216612 1381.216612 1381.216612 1381.216612 1381.216612 1381.216612 2013-Sep-24 23:40:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.216612 sky0=1381.216612 sky1=1381.216612 sky2=1381.216612 sky3=1381.216612 sky4=1381.216612 sky5=1381.216612 sky6=1381.216612 sky7=1381.216612 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-24 23:40:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.216612 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631216612.0} 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 23:40:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-24 23:40:14 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-24 23:40:14 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:09:04.0 Dec = +07:31:14.6 2013-Sep-24 23:40:14 LOG3 track_source: Calling 'track_source AGES7619_p1_107 230904.0 073114.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:40:14 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 23:40:14 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Sep-24 23:40:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_107} INFO {Slewing to source 'AGES7619_p1_107' ...} 2013-Sep-24 23:40:14 INFO1 track_source: Starting to track AGES7619_p1_107 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_107" 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: set ra 230904.0 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: set dec 073114.6 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: pnt tr 230904.0 073114.6 -CJ 2013-Sep-24 23:40:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:40:14 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 23:40:14 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Sep-24 23:40:14 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 23:40:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 23:40:15 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Sep-24 23:40:15 START begin_task: Starting task 'waiting on telescope' 2013-Sep-24 23:40:15 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2013-Sep-24 23:40:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-24 23:40:15 LOG3 waittrk: Start waittrk 5 2013-Sep-24 23:40:15 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-24 23:40:15 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631216612.0} 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_107" 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: set ra 230904.0 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% 230904.0 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: set dec 073114.6 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: 073114.6 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: pnt tr 230904.0 073114.6 -CJ 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:40:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 23:40:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-24 23:40:20 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2013-Sep-24 23:40:20 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-24 23:40:20 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2013-Sep-24 23:40:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-24 23:40:21 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2013-Sep-24 23:40:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:40:21 INFO2 waittrk: Now tracking AGES7619_p1_107 2013-Sep-24 23:40:21 LOG4 waittrk: Current telescope position: Az = 384.78 ZA = 11.78 2013-Sep-24 23:40:21 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-24 23:40:21 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2013-Sep-24 23:40:21 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-24 23:40:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-24 23:40:21 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2013-Sep-24 23:40:21 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-24 23:40:21 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2013-Sep-24 23:40:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-24 23:40:21 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-24 23:40:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-24 23:40:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-24 23:40:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:40:21 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-24 23:40:21 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2013-Sep-24 23:40:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-24 23:40:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:40:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:24 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 23:40:24 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-24 23:40:24 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2013-Sep-24 23:40:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-24 23:40:24 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-24 23:40:24 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2013-Sep-24 23:40:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 23:40:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:40:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:40:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:40:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-24 23:40:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-24 23:40:25 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2013-Sep-24 23:40:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-24 23:40:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:25 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-24 23:40:25 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 7 dB --- beam 3: 6 4 dB 2013-Sep-24 23:40:25 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-24 23:40:25 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 3 dB --- beam 7: 9 4 dB 2013-Sep-24 23:40:25 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-24 23:40:25 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-24 23:40:25 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2013-Sep-24 23:40:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.096 0.968 ALFA beam 1: 1.022 0.969 2013-Sep-24 23:40:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.981 0.902 ALFA beam 3: 0.987 1.086 2013-Sep-24 23:40:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.065 1.037 ALFA beam 5: 0.984 0.070 2013-Sep-24 23:40:25 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.947 1.090 ALFA beam 7: 1.029 1.020 2013-Sep-24 23:40:25 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-24 23:40:25 LOG5 finish_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2013-Sep-24 23:40:25 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-24 23:40:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:25 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-24 23:40:25 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2013-Sep-24 23:40:25 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-24 23:40:26 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Sep-24 23:40:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-24 23:40:26 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-24 23:40:26 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-24 23:40:26 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-24 23:40:26 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2013-Sep-24 23:40:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-24 23:40:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 0.968 1.022 0.969 2013-Sep-24 23:40:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.981 0.902 0.987 1.086 2013-Sep-24 23:40:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 1.037 0.984 0.070 2013-Sep-24 23:40:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 1.090 1.029 1.020 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.5 27.7 B 28.9 29.1 mn:A 0.5 0.5 B 0.3 0.9 gn: 8 11 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.0 28.6 B 30.0 31.9 mn:A 1.1 0.3 B 0.4 0.1 gn: 9 12 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.1 29.0 B 31.8 26.6 mn:A 0.1 -0.4 B -0.1 0.9 gn: 10 8 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.6 29.1 B 30.4 30.4 mn:A 1.3 0.9 B 0.8 1.2 gn: 11 7 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.2 28.3 B 29.5 31.0 mn:A 0.4 -0.1 B 0.4 0.1 gn: 6 9 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.3 31.5 B 31.3 29.1 mn:A 0.1 -0.5 B -0.2 0.3 gn: 7 9 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.4 31.0 B 30.1 26.9 mn:A 0.1 -0.4 B -0.4 -0.3 gn: 9 10 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.6 30.9 B 28.8 30.1 mn:A -0.0 0.1 B 0.0 0.4 gn: 9 10 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.1 28.2 B 29.9 30.1 mn:A -0.1 0.7 B 0.4 -0.4 gn: 4 6 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b4s1g0 rms:A 30.3 27.5 B 31.4 30.3 mn:A 0.1 0.1 B -0.2 0.4 gn: 6 7 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.4 31.1 B 29.2 29.2 mn:A 1.0 -0.2 B 1.3 0.4 gn: 7 26 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.4 29.1 B 29.3 29.0 mn:A 1.0 -0.2 B -1.1 0.6 gn: 6 27 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.7 27.7 B 28.1 29.1 mn:A -0.1 1.4 B -0.3 -0.3 gn: 6 12 2013-Sep-24 23:40:31 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.6 30.3 B 31.1 31.3 mn:A 0.9 0.7 B -1.2 -0.8 gn: 8 14 2013-Sep-24 23:40:31 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-24 23:40:31 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2013-Sep-24 23:40:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-24 23:40:31 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-24 23:40:31 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Sep-24 23:40:31 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-24 23:40:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:32 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-24 23:40:32 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Sep-24 23:40:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 23:40:32 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-24 23:40:32 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2013-Sep-24 23:40:32 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-24 23:40:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:32 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-24 23:40:32 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2013-Sep-24 23:40:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:40:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:40:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:40:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-24 23:40:32 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-24 23:40:32 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-24 23:40:32 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2013-Sep-24 23:40:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-24 23:40:32 START begin_task: Starting task 'selecting calibration type' 2013-Sep-24 23:40:32 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2013-Sep-24 23:40:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-24 23:40:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-24 23:40:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:40:32 START begin_task: Starting task 'waiting on setcal' 2013-Sep-24 23:40:32 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2013-Sep-24 23:40:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-24 23:40:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-24 23:40:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-24 23:40:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:32 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-24 23:40:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-24 23:40:32 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-24 23:40:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:40:33 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-24 23:40:33 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:40:33 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:40:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:40:33 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:40:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-24 23:40:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-24 23:40:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:40:33 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-24 23:40:33 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20130924.a2048.0006.fits 2013-Sep-24 23:40:33 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-24 23:40:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-24 23:40:33 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-24 23:40:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-24 23:40:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-24 23:40:33 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-24 23:40:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-24 23:40:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-24 23:40:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 23:40:33 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130924.a2048.0006.fits} 2013-Sep-24 23:40:33 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 23:40:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-24 23:40:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 23:40:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 23:40:33 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2013-Sep-24 23:40:33 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-24 23:40:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 23:40:33 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2013-Sep-24 23:40:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-24 23:40:34 LOG5 log_alfabeam: Parameters: 23.15111111111111 7.5207222222222239 23.500424 2013.7337069992648 -1.700092 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 0 23.151111111111110 7.520722222222222 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 1 23.150684337421286 7.623121517901333 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 2 23.145425172008149 7.555518142365997 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 3 23.145851266733903 7.452942153827014 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 4 23.151587520884128 7.418201191831296 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 5 23.156812312728107 7.486564036610903 2013-Sep-24 23:40:34 LOG4 log_alfabeam: ALFABEAM 6 23.156335291268746 7.588908334796982 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: object=AGES7619_p1_107 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: patternid=326700150 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: scanid=326700151 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: topoafreqhz=1456216612.0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: topobfreqhz=1306216612.0 2013-Sep-24 23:40:34 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 23:40:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 23:40:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_107:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326700150:scanid=326700151:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216612.0:topobfreqhz=1306216612.0:filetype=1 2013-Sep-24 23:40:34 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 23:40:34 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2013-Sep-24 23:40:34 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 23:40:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 23:40:34 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2013-Sep-24 23:40:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 23:40:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 23:40:34 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 23:40:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 23:40:34 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2013-Sep-24 23:40:35 LOG4 from_mock: From MOCK: starok 2013-Sep-24 23:40:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 23:40:35 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2013-Sep-24 23:40:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 23:40:35 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700151 2013-Sep-24 23:40:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 23:40:35 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2013-Sep-24 23:40:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 23:40:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 23:40:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 23:40:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-24 23:40:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13236.00 2013-Sep-24 23:40:37 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 23:40:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 23:40:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:40 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:40:40.01 2013-Sep-24 23:40:40 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380080440.01 Tue Sep 24 23:40:40 2013 2013-Sep-24 23:40:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216612 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 23:40:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 23:40:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 23:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.513 (still bad) 2013-Sep-24 23:40:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:40:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 23:40:46 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 23:40:46 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 23:40:46 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2013-Sep-24 23:40:46 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 23:40:46 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2013-Sep-24 23:40:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-24 23:40:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-24 23:40:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-24 23:40:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-24 23:40:46 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2013-Sep-24 23:40:46 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-24 23:40:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-24 23:40:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-24 23:40:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-24 23:40:46 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2013-Sep-24 23:40:46 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-24 23:40:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 23:40:46 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2013-Sep-24 23:40:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-24 23:40:46 LOG5 log_alfabeam: Parameters: 23.15111111111111 7.5207222222222239 23.504045 2013.7337074112099 -1.700092 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 0 23.151111111111113 7.520722222222227 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 1 23.150711569357618 7.623145970940407 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 2 23.145434465740031 7.555852106490487 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 3 23.145833294039434 7.453252046946943 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 4 23.151560173437325 7.418174055098856 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 5 23.156803154444955 7.486227915502766 2013-Sep-24 23:40:46 LOG4 log_alfabeam: ALFABEAM 6 23.156353445631115 7.588599728826387 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: object=AGES7619_p1_107 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: patternid=326700150 2013-Sep-24 23:40:46 TEST take_mock_data: PSET configuration: scanid=326700152 2013-Sep-24 23:40:47 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 23:40:47 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 23:40:47 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 23:40:47 TEST take_mock_data: PSET configuration: topoafreqhz=1456216612.0 2013-Sep-24 23:40:47 TEST take_mock_data: PSET configuration: topobfreqhz=1306216612.0 2013-Sep-24 23:40:47 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 23:40:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 23:40:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_107:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326700150:scanid=326700152:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216612.0:topobfreqhz=1306216612.0:filetype=1 2013-Sep-24 23:40:47 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 23:40:47 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2013-Sep-24 23:40:47 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 23:40:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 23:40:47 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2013-Sep-24 23:40:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 23:40:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 23:40:47 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-24 23:40:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 23:40:47 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2013-Sep-24 23:40:47 LOG4 from_mock: From MOCK: starok 2013-Sep-24 23:40:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 23:40:47 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2013-Sep-24 23:40:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 23:40:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326700152 2013-Sep-24 23:40:48 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 23:40:48 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2013-Sep-24 23:40:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 23:40:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 23:40:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 23:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.085 and 1.513 (still bad) 2013-Sep-24 23:40:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-24 23:40:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13249.00 2013-Sep-24 23:40:49 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 23:40:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-24 23:40:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-24 23:40:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:40:52.01 2013-Sep-24 23:40:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380080452.01 Tue Sep 24 23:40:52 2013 2013-Sep-24 23:40:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216612 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 23:40:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 23:40:54 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-24 23:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:40:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-24 23:40:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:40:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:40:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-24 23:40:58 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-24 23:40:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-24 23:40:58 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-24 23:40:58 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-24 23:40:58 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-24 23:40:58 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-24 23:40:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:58 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-24 23:40:58 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-24 23:40:58 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 24.97 and ZA = 11.81 2013-Sep-24 23:40:58 LOG3 track_source: Calling 'track_source AGES7619_p1_107 24.97 11.8064947609 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-24 23:40:58 START begin_task: Starting task 'sending tracking commands' 2013-Sep-24 23:40:58 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES7619_p1_107} INFO {Slewing to source 'AGES7619_p1_107' ...} 2013-Sep-24 23:40:58 INFO1 track_source: Starting to track AGES7619_p1_107 2013-Sep-24 23:40:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES7619_p1_107" 2013-Sep-24 23:40:58 LOG3 vw_send: To DATATAKING: set ra 24.97 2013-Sep-24 23:40:58 LOG3 vw_send: To DATATAKING: set dec 11.8064947609 2013-Sep-24 23:40:58 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-24 23:40:58 LOG3 vw_send: To DATATAKING: pnt tr 24.97 11.8064947609 -CF 2013-Sep-24 23:40:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:40:58 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-24 23:40:58 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-24 23:40:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-24 23:40:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-24 23:40:58 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Sep-24 23:40:58 LOG1 fixed_driftmap: Parameters: HA = +00:19:59.8 Start = 23:30:43.4 LST = 23:30:26.6 diff = 16.8 secs 2013-Sep-24 23:40:59 INFO2 fixed_driftmap: Waiting 14.8 seconds for RA 23:10:44 2013-Sep-24 23:40:59 INFO2 lstwait: Waiting for 14.7 secs from LST 23:30:27 to LST 23:30:41 ... 2013-Sep-24 23:40:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.749547056553318 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-24 23:40:59 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-24 23:40:59 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES7619_p1_107" 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: set ra 24.97 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: vw% 24.97 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: set dec 11.8064947609 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: 11.8064947609 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: pnt tr 24.97 11.8064947609 -CF 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-24 23:40:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-24 23:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:41:13 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-24 23:41:13 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Sep-24 23:41:13 LOG4 lstwait: Finished waiting 1.26 seconds late 2013-Sep-24 23:41:13 INFO3 lstwait: Finished waiting 2013-Sep-24 23:41:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-24 23:41:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-24 23:41:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-24 23:41:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-24 23:41:14 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-24 23:41:14 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-24 23:41:14 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2013-Sep-24 23:41:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-24 23:41:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: object=AGES7619_p1_107 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: patternid=326700153 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: scanid=326700153 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: topoafreqhz=1456216612.0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: topobfreqhz=1306216612.0 2013-Sep-24 23:41:14 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-24 23:41:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-24 23:41:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES7619_p1_107:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326700153:scanid=326700153:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456216612.0:topobfreqhz=1306216612.0:filetype=1 2013-Sep-24 23:41:14 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-24 23:41:14 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2013-Sep-24 23:41:14 LOG4 from_mock: From MOCK: psetok 2013-Sep-24 23:41:14 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-24 23:41:14 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2013-Sep-24 23:41:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-24 23:41:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-24 23:41:14 LOG3 socket_wait: To MOCK: STAR1200 2013-Sep-24 23:41:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-24 23:41:14 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Sep-24 23:41:15 LOG4 from_mock: From MOCK: starok 2013-Sep-24 23:41:15 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-24 23:41:15 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Sep-24 23:41:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-24 23:41:15 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 326700153 2013-Sep-24 23:41:15 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-24 23:41:15 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2013-Sep-24 23:41:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-24 23:41:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-24 23:41:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-24 23:41:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-24 23:41:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13276.00 2013-Sep-24 23:41:17 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.216612 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-24 23:41:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-24 23:41:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.216612 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2013-Sep-24 23:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.153 (still bad) 2013-Sep-24 23:41:20 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 23:41:20.01 2013-Sep-24 23:41:20 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380080480.01 Tue Sep 24 23:41:20 2013 2013-Sep-24 23:41:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-24 23:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.149 (still bad) 2013-Sep-24 23:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 23:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:41:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:41:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.182 (still bad) 2013-Sep-24 23:41:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:41:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 0.939 0.993 0.961 2013-Sep-24 23:41:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 0.867 0.976 1.061 2013-Sep-24 23:41:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 1.024 0.977 0.069 2013-Sep-24 23:41:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 1.197 1.106 1.118 2013-Sep-24 23:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.280 (still bad) 2013-Sep-24 23:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.368 (still bad) 2013-Sep-24 23:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.435 (still bad) 2013-Sep-24 23:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.485 (still bad) 2013-Sep-24 23:41:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:41:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.541 (still bad) 2013-Sep-24 23:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.481 (still bad) 2013-Sep-24 23:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.431 (still bad) 2013-Sep-24 23:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.351 (still bad) 2013-Sep-24 23:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.253 (still bad) 2013-Sep-24 23:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.176 (still bad) 2013-Sep-24 23:41:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:41:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.159 (still bad) 2013-Sep-24 23:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-24 23:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.173 (still bad) 2013-Sep-24 23:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.180 (still bad) 2013-Sep-24 23:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.174 (still bad) 2013-Sep-24 23:42:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.199 (still bad) 2013-Sep-24 23:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-24 23:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:42:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:42:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.101 0.944 0.989 0.957 2013-Sep-24 23:42:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.032 0.924 0.971 1.059 2013-Sep-24 23:42:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 1.016 0.968 0.069 2013-Sep-24 23:42:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 1.081 0.995 1.010 2013-Sep-24 23:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-24 23:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:43:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:43:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 0.952 1.006 0.967 2013-Sep-24 23:43:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 0.868 0.978 1.067 2013-Sep-24 23:43:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.023 0.970 0.069 2013-Sep-24 23:43:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 1.087 1.004 1.018 2013-Sep-24 23:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.094 (still bad) 2013-Sep-24 23:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.109 (still bad) 2013-Sep-24 23:43:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:43:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.135 (still bad) 2013-Sep-24 23:44:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:44:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.112 (still bad) 2013-Sep-24 23:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:44:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.111 (still bad) 2013-Sep-24 23:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-24 23:44:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:44:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.130 0.970 0.997 0.957 2013-Sep-24 23:44:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.865 0.974 1.057 2013-Sep-24 23:44:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 1.020 0.971 0.069 2013-Sep-24 23:44:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 1.095 1.015 1.021 2013-Sep-24 23:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-24 23:44:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.144 (still bad) 2013-Sep-24 23:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-24 23:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.148 (still bad) 2013-Sep-24 23:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.144 (still bad) 2013-Sep-24 23:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:44:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.117 (still bad) 2013-Sep-24 23:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 23:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:45:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.120 (still bad) 2013-Sep-24 23:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 23:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-24 23:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:45:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.117 (still bad) 2013-Sep-24 23:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.134 (still bad) 2013-Sep-24 23:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:45:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.130 (still bad) 2013-Sep-24 23:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.135 (still bad) 2013-Sep-24 23:45:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:45:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.109 0.945 1.002 0.959 2013-Sep-24 23:45:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.975 0.874 0.981 1.067 2013-Sep-24 23:45:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 1.022 0.980 0.069 2013-Sep-24 23:45:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 1.098 1.015 1.025 2013-Sep-24 23:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.146 (still bad) 2013-Sep-24 23:45:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 23:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 23:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.144 (still bad) 2013-Sep-24 23:45:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.137 (still bad) 2013-Sep-24 23:46:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.138 (still bad) 2013-Sep-24 23:46:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-24 23:46:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 23:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:46:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:46:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.144 0.972 1.040 0.985 2013-Sep-24 23:46:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 0.868 0.980 1.062 2013-Sep-24 23:46:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.017 0.979 0.069 2013-Sep-24 23:46:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 1.116 1.041 1.042 2013-Sep-24 23:46:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 23:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 23:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.144 (still bad) 2013-Sep-24 23:46:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:47:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.143 (still bad) 2013-Sep-24 23:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.130 (still bad) 2013-Sep-24 23:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:47:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.144 (still bad) 2013-Sep-24 23:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 23:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:47:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:47:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:47:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.108 0.944 1.008 0.960 2013-Sep-24 23:47:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 0.868 0.985 1.070 2013-Sep-24 23:47:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 1.023 0.978 0.069 2013-Sep-24 23:47:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 1.084 1.011 1.013 2013-Sep-24 23:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 23:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:47:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 23:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:48:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:48:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:48:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.098 (still bad) 2013-Sep-24 23:48:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:48:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.939 1.002 0.957 2013-Sep-24 23:48:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.863 0.977 1.060 2013-Sep-24 23:48:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.053 1.017 0.970 0.069 2013-Sep-24 23:48:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 1.081 1.005 1.010 2013-Sep-24 23:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.108 (still bad) 2013-Sep-24 23:48:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.130 (still bad) 2013-Sep-24 23:49:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.127 (still bad) 2013-Sep-24 23:49:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.127 (still bad) 2013-Sep-24 23:49:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.124 (still bad) 2013-Sep-24 23:49:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-24 23:49:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:49:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 0.937 1.002 0.955 2013-Sep-24 23:49:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 0.864 0.978 1.060 2013-Sep-24 23:49:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.057 1.013 0.976 0.069 2013-Sep-24 23:49:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 1.087 1.010 1.015 2013-Sep-24 23:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:49:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.122 (still bad) 2013-Sep-24 23:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-24 23:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-24 23:50:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.122 (still bad) 2013-Sep-24 23:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-24 23:50:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.125 (still bad) 2013-Sep-24 23:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:50:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.128 (still bad) 2013-Sep-24 23:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:50:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:50:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:50:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 0.947 1.017 0.968 2013-Sep-24 23:50:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.868 0.991 1.069 2013-Sep-24 23:50:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.025 1.008 0.069 2013-Sep-24 23:50:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 1.095 1.022 1.022 2013-Sep-24 23:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:50:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 23:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.129 (still bad) 2013-Sep-24 23:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.150 (still bad) 2013-Sep-24 23:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.157 (still bad) 2013-Sep-24 23:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 23:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:51:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:51:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:51:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:51:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:51:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:51:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 0.952 1.023 0.963 2013-Sep-24 23:51:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.871 0.993 1.073 2013-Sep-24 23:51:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 1.029 0.991 0.069 2013-Sep-24 23:51:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 1.098 1.026 1.027 2013-Sep-24 23:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:51:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.106 (still bad) 2013-Sep-24 23:52:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 23:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.118 (still bad) 2013-Sep-24 23:52:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.138 (still bad) 2013-Sep-24 23:52:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.124 (still bad) 2013-Sep-24 23:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.128 (still bad) 2013-Sep-24 23:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.149 (still bad) 2013-Sep-24 23:52:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.144 (still bad) 2013-Sep-24 23:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.152 (still bad) 2013-Sep-24 23:52:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:52:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.135 0.965 1.014 0.959 2013-Sep-24 23:52:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.871 0.985 1.071 2013-Sep-24 23:52:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 1.021 0.984 0.069 2013-Sep-24 23:52:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 1.094 1.023 1.020 2013-Sep-24 23:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:52:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.158 (still bad) 2013-Sep-24 23:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.131 (still bad) 2013-Sep-24 23:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.131 (still bad) 2013-Sep-24 23:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:53:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.137 (still bad) 2013-Sep-24 23:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.127 (still bad) 2013-Sep-24 23:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.133 (still bad) 2013-Sep-24 23:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:53:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.145 (still bad) 2013-Sep-24 23:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.131 (still bad) 2013-Sep-24 23:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.133 (still bad) 2013-Sep-24 23:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:53:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.141 (still bad) 2013-Sep-24 23:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.129 (still bad) 2013-Sep-24 23:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.134 (still bad) 2013-Sep-24 23:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.113 (still bad) 2013-Sep-24 23:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:53:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.140 (still bad) 2013-Sep-24 23:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 23:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:53:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:53:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.100 0.935 0.998 0.950 2013-Sep-24 23:53:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 0.870 0.982 1.064 2013-Sep-24 23:53:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 1.021 0.981 0.069 2013-Sep-24 23:53:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 1.092 1.020 1.016 2013-Sep-24 23:53:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.136 (still bad) 2013-Sep-24 23:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 23:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:54:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.122 (still bad) 2013-Sep-24 23:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:54:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.132 (still bad) 2013-Sep-24 23:54:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:54:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:54:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:54:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.134 0.966 1.035 0.982 2013-Sep-24 23:54:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 0.866 0.979 1.059 2013-Sep-24 23:54:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 1.020 0.975 0.069 2013-Sep-24 23:54:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 1.087 1.017 1.012 2013-Sep-24 23:54:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.133 (still bad) 2013-Sep-24 23:55:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:55:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.128 (still bad) 2013-Sep-24 23:55:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:55:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.113 (still bad) 2013-Sep-24 23:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:55:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:55:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.078 < 0.75)! 2013-Sep-24 23:55:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.940 1.004 0.960 2013-Sep-24 23:55:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.891 1.006 1.088 2013-Sep-24 23:55:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 1.049 1.008 0.078 2013-Sep-24 23:55:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 1.092 1.015 1.017 2013-Sep-24 23:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.102 (still bad) 2013-Sep-24 23:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:56:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.107 (still bad) 2013-Sep-24 23:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.118 (still bad) 2013-Sep-24 23:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 23:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:56:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.110 (still bad) 2013-Sep-24 23:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.121 (still bad) 2013-Sep-24 23:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:56:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.111 (still bad) 2013-Sep-24 23:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.123 (still bad) 2013-Sep-24 23:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.111 (still bad) 2013-Sep-24 23:56:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.112 (still bad) 2013-Sep-24 23:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 23:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:56:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.117 (still bad) 2013-Sep-24 23:56:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:56:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.941 1.000 0.958 2013-Sep-24 23:56:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 0.869 0.984 1.063 2013-Sep-24 23:56:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 1.024 0.979 0.069 2013-Sep-24 23:56:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 1.088 1.014 1.013 2013-Sep-24 23:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.126 (still bad) 2013-Sep-24 23:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.130 (still bad) 2013-Sep-24 23:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:57:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.127 (still bad) 2013-Sep-24 23:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.117 (still bad) 2013-Sep-24 23:57:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.124 (still bad) 2013-Sep-24 23:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-24 23:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.133 (still bad) 2013-Sep-24 23:57:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.129 (still bad) 2013-Sep-24 23:57:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.123 (still bad) 2013-Sep-24 23:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.132 (still bad) 2013-Sep-24 23:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.125 (still bad) 2013-Sep-24 23:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.139 (still bad) 2013-Sep-24 23:57:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-24 23:57:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:57:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 0.948 1.011 0.959 2013-Sep-24 23:57:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 0.874 0.987 1.069 2013-Sep-24 23:57:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 1.037 0.989 0.069 2013-Sep-24 23:57:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 1.099 1.022 1.023 2013-Sep-24 23:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.128 (still bad) 2013-Sep-24 23:58:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.108 (still bad) 2013-Sep-24 23:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.116 (still bad) 2013-Sep-24 23:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-24 23:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.131 (still bad) 2013-Sep-24 23:58:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.112 (still bad) 2013-Sep-24 23:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.133 (still bad) 2013-Sep-24 23:58:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.098 (still bad) 2013-Sep-24 23:58:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.133 (still bad) 2013-Sep-24 23:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-24 23:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:58:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.131 (still bad) 2013-Sep-24 23:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-24 23:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:58:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:58:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 0.950 1.021 0.964 2013-Sep-24 23:58:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.982 0.876 0.993 1.077 2013-Sep-24 23:58:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 1.037 0.995 0.069 2013-Sep-24 23:58:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 1.100 1.028 1.028 2013-Sep-24 23:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:59:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.101 (still bad) 2013-Sep-24 23:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.119 (still bad) 2013-Sep-24 23:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.100 (still bad) 2013-Sep-24 23:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:59:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.106 (still bad) 2013-Sep-24 23:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.097 (still bad) 2013-Sep-24 23:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.114 (still bad) 2013-Sep-24 23:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.115 (still bad) 2013-Sep-24 23:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.095 (still bad) 2013-Sep-24 23:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:59:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-24 23:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-24 23:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.104 (still bad) 2013-Sep-24 23:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.107 (still bad) 2013-Sep-24 23:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-24 23:59:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-24 23:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-24 23:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.109 (still bad) 2013-Sep-24 23:59:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-24 23:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-24 23:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.093 (still bad) 2013-Sep-24 23:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-24 23:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-24 23:59:57 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-24 23:59:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-24 23:59:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.106 0.948 1.015 0.966 2013-Sep-24 23:59:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 0.871 0.987 1.071 2013-Sep-24 23:59:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 1.028 0.987 0.069 2013-Sep-24 23:59:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 1.092 1.019 1.022 2013-Sep-24 23:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-25 00:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-25 00:00:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:00:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-25 00:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.094 (still bad) 2013-Sep-25 00:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-25 00:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-25 00:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.086 (still bad) 2013-Sep-25 00:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.088 (still bad) 2013-Sep-25 00:00:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.117 (still bad) 2013-Sep-25 00:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-25 00:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-25 00:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.092 (still bad) 2013-Sep-25 00:00:45 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.116 (still bad) 2013-Sep-25 00:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-25 00:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.096 (still bad) 2013-Sep-25 00:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.103 (still bad) 2013-Sep-25 00:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-25 00:00:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:00:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 0.934 0.996 0.965 2013-Sep-25 00:00:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.857 0.970 1.054 2013-Sep-25 00:00:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.052 1.015 0.966 0.069 2013-Sep-25 00:00:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 1.076 0.997 1.003 2013-Sep-25 00:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.075 and 1.117 (still bad) 2013-Sep-25 00:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-25 00:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.086 (still bad) 2013-Sep-25 00:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-25 00:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-25 00:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.074 and 1.114 (still bad) 2013-Sep-25 00:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:01:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 00:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:01:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 00:01:21 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 00:01:21 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 00:01:21 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2013-Sep-25 00:01:21 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 00:01:21 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2013-Sep-25 00:01:21 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-25 00:01:21 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2013-Sep-25 00:01:21 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-25 00:01:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 00:01:21 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-25 00:01:21 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2013-Sep-25 00:01:21 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2013-Sep-25 00:01:21 COMMAND run_command_line: EXECUTING command 61: 'IF LSTSLEW(NGC7817_p1_050) < 000114 THEN' 2013-Sep-25 00:01:23 LOG3 is_if_valid: Current source data: up 213.1 2.7 UP - - 89 7.1 2013-Sep-25 00:01:23 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC7817_p1_050) < 000114 2013-Sep-25 00:01:23 INFO5 is_if_valid: Condition parsed as: -0.033626666666666694 < 0.020555555555555556 2013-Sep-25 00:01:23 COMMAND run_command_line: EXECUTING command 62: 'FIXEDDRIFT az=157.44 alfaangle=39.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_050 ra=235630.00 dec=203130.00' 2013-Sep-25 00:01:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-25 00:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:01:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 00:01:23 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 157.44 39.0 hcorcal 5 tracking no off lcorcal first 1 NGC7817_p1_050 235630.00 203130.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:01:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-25 00:01:24 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2013-Sep-25 00:01:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES7619_p1_107' 2013-Sep-25 00:01:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-25 00:01:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC7817_p1_050} 2013-Sep-25 00:01:24 INFO3 fixed_driftmap: Sending telescope to Az = 157.44 and ZA = 2.44 2013-Sep-25 00:01:24 LOG3 track_source: Calling 'track_source NGC7817_p1_050 157.44 2.4405560942 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:01:24 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 00:01:24 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Sep-25 00:01:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_050} INFO {Slewing to source 'NGC7817_p1_050' ...} 2013-Sep-25 00:01:24 INFO1 track_source: Starting to track NGC7817_p1_050 2013-Sep-25 00:01:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_050" 2013-Sep-25 00:01:24 LOG3 vw_send: To DATATAKING: set ra 157.44 2013-Sep-25 00:01:24 LOG3 vw_send: To DATATAKING: set dec 2.4405560942 2013-Sep-25 00:01:24 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 00:01:24 LOG3 vw_send: To DATATAKING: pnt tr 157.44 2.4405560942 -CF 2013-Sep-25 00:01:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:01:24 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 00:01:24 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Sep-25 00:01:24 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 00:01:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:01:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 00:01:24 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Sep-25 00:01:24 START begin_task: Starting task 'rotate ALFA to +39 degrees' 2013-Sep-25 00:01:24 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Sep-25 00:01:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +39 degrees ...} 2013-Sep-25 00:01:24 INFO2 rotate_alfa: ALFA commanded to +39.0 degrees 2013-Sep-25 00:01:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 39.0 REPLY 2013-Sep-25 00:01:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 00:01:24 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 00:01:24 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2013-Sep-25 00:01:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_050" 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: set ra 157.44 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: vw% 157.44 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: set dec 2.4405560942 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: 2.4405560942 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: pnt tr 157.44 2.4405560942 -CF 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:01:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 00:01:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 00:01:48 INFO3 alfa_motor: ALFA rotator in-position +39.00 degrees 2013-Sep-25 00:01:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 00:01:48 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2013-Sep-25 00:01:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:01:48 STOP finish_task: Finishing task 'rotate ALFA to +39 degrees' 2013-Sep-25 00:01:48 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Sep-25 00:01:48 INFO2 finish_task: DONE finished configuration: rotating ALFA to +39 degrees 2013-Sep-25 00:01:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:01:49 STOP end_task: Finishing task 'rotate ALFA to +39 degrees' with status 'OK' 2013-Sep-25 00:01:49 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Sep-25 00:01:49 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 00:01:49 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2013-Sep-25 00:01:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 00:01:49 LOG3 waittrk: Start waittrk 5 2013-Sep-25 00:01:49 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 00:01:49 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2013-Sep-25 00:01:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 00:01:54 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2013-Sep-25 00:01:54 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 00:01:54 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2013-Sep-25 00:06:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 00:06:54 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2013-Sep-25 00:06:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:06:54 INFO2 waittrk: Now tracking NGC7817_p1_050 2013-Sep-25 00:06:54 LOG4 waittrk: Current telescope position: Az = 517.27 ZA = 2.44 2013-Sep-25 00:06:54 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 00:06:54 LOG5 finish_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2013-Sep-25 00:06:54 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 00:06:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:06:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 00:06:54 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2013-Sep-25 00:06:54 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 00:06:54 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Sep-25 00:06:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 00:06:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 00:06:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:06:54 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 00:06:54 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2013-Sep-25 00:06:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 00:06:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:06:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:06:55 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 00:06:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 00:06:55 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2013-Sep-25 00:06:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 00:06:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 00:06:55 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 00:06:55 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 00:06:55 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2013-Sep-25 00:06:55 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 00:06:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 00:06:56 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2013-Sep-25 00:06:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 00:06:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 00:06:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 00:06:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 00:06:56 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 00:06:56 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2013-Sep-25 00:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:06:56 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 00:06:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 00:06:56 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2013-Sep-25 00:06:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 00:06:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 00:06:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 00:06:56 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Sep-25 00:06:56 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-25 00:06:56 INFO2 astwait: Waiting for 224 seconds from 04:06:56 to 04:10:40 UTC ... 2013-Sep-25 00:06:56 LOG4 send_obs_status: To obs_status: <1> TASKTIME 224 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 00:06:56 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-25 00:06:56 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2013-Sep-25 00:10:40 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-25 00:10:40 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2013-Sep-25 00:10:40 INFO3 astwait: Finished waiting 2013-Sep-25 00:10:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:10:40 LOG5 dopset_later: Calling 'dopset_later 60.669182930729662' 2013-Sep-25 00:10:40 INFO3 dopset_later: Setting Doppler correction for 00:11:40 (60.7 seconds from now) 2013-Sep-25 00:10:40 LOG5 antvel: Calling 'antvel 157.440000 2.440556 F Heliocentric 60.669182930729662' 2013-Sep-25 00:10:40 LOG2 antvel: Transforming current Az = 157.44 ZA = 2.44 to apparent RA = 23:57:14.1 Dec = +20:36:17.8 2013-Sep-25 00:10:40 LOG2 antvel: Parameters to Doppler: Heliocentric 15100 2013 268 0.0 2013-Sep-25 00:10:40 INFO5 antvel: Computed antenna velocity: -2.29064 km/s 2013-Sep-25 00:10:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-2.2906409227000002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-25 00:10:40 INFO4 dopset_gen: New sky frequencies: 1381.253982 1381.253982 1381.253982 1381.253982 1381.253982 1381.253982 1381.253982 1381.253982 1381.253982 2013-Sep-25 00:10:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.253982 sky0=1381.253982 sky1=1381.253982 sky2=1381.253982 sky3=1381.253982 sky4=1381.253982 sky5=1381.253982 sky6=1381.253982 sky7=1381.253982 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 00:10:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.253982 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631253982.0} 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 00:10:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-25 00:10:40 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-25 00:10:40 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:55:34.4 Dec = +20:31:42.5 2013-Sep-25 00:10:40 LOG3 track_source: Calling 'track_source NGC7817_p1_050 235534.4 203142.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:10:40 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 00:10:40 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Sep-25 00:10:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_050} INFO {Slewing to source 'NGC7817_p1_050' ...} 2013-Sep-25 00:10:40 INFO1 track_source: Starting to track NGC7817_p1_050 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_050" 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: set ra 235534.4 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: set dec 203142.5 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: pnt tr 235534.4 203142.5 -CJ 2013-Sep-25 00:10:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:10:40 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 00:10:40 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Sep-25 00:10:41 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 00:10:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:10:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 00:10:41 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Sep-25 00:10:41 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 00:10:41 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Sep-25 00:10:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 00:10:41 LOG3 waittrk: Start waittrk 5 2013-Sep-25 00:10:41 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 00:10:41 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631253982.0} 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_050" 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: set ra 235534.4 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% 235534.4 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: set dec 203142.5 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: 203142.5 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: pnt tr 235534.4 203142.5 -CJ 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:10:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 00:10:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 00:10:46 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2013-Sep-25 00:10:46 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 00:10:46 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Sep-25 00:10:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 00:10:48 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Sep-25 00:10:48 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:10:48 INFO2 waittrk: Now tracking NGC7817_p1_050 2013-Sep-25 00:10:48 LOG4 waittrk: Current telescope position: Az = 516.92 ZA = 2.45 2013-Sep-25 00:10:48 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 00:10:48 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Sep-25 00:10:48 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 00:10:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:10:48 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 00:10:48 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Sep-25 00:10:48 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-25 00:10:48 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Sep-25 00:10:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-25 00:10:48 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-25 00:10:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-25 00:10:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-25 00:10:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:10:49 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-25 00:10:49 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2013-Sep-25 00:10:49 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-25 00:10:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:51 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 00:10:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-25 00:10:51 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2013-Sep-25 00:10:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-25 00:10:52 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 00:10:52 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2013-Sep-25 00:10:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 00:10:52 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:10:52 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:10:52 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:10:52 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:10:52 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-25 00:10:52 LOG5 begin_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2013-Sep-25 00:10:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-25 00:10:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:52 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 8 dB 2013-Sep-25 00:10:52 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-25 00:10:52 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-25 00:10:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-25 00:10:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-25 00:10:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-25 00:10:52 LOG5 end_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2013-Sep-25 00:10:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.030 0.918 ALFA beam 1: 0.921 0.915 2013-Sep-25 00:10:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.916 1.074 ALFA beam 3: 0.981 1.054 2013-Sep-25 00:10:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.052 1.017 ALFA beam 5: 0.926 0.069 2013-Sep-25 00:10:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.041 1.031 ALFA beam 7: 0.903 0.964 2013-Sep-25 00:10:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 00:10:52 LOG5 finish_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2013-Sep-25 00:10:52 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-25 00:10:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:10:53 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 00:10:53 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2013-Sep-25 00:10:53 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-25 00:10:53 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2013-Sep-25 00:10:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 00:10:53 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-25 00:10:53 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-25 00:10:53 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-25 00:10:53 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2013-Sep-25 00:10:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:10:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 0.918 0.921 0.915 2013-Sep-25 00:10:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 1.074 0.981 1.054 2013-Sep-25 00:10:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.052 1.017 0.926 0.069 2013-Sep-25 00:10:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 1.031 0.903 0.964 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.5 26.8 B 28.3 28.5 mn:A 0.5 0.4 B 0.2 0.8 gn: 8 11 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.6 30.2 B 28.3 30.0 mn:A 1.0 0.3 B 0.2 0.0 gn: 10 12 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.7 27.7 B 34.3 28.8 mn:A -0.1 -0.4 B -0.1 0.9 gn: 10 9 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b1s1g0 rms:A 28.9 26.6 B 28.0 28.0 mn:A 1.3 0.9 B 0.7 1.1 gn: 11 7 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 31.0 B 29.0 30.4 mn:A 0.1 -0.2 B 0.3 0.1 gn: 7 9 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.2 29.3 B 32.3 30.0 mn:A 0.2 -0.4 B -0.1 0.5 gn: 7 10 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 30.9 B 30.0 26.7 mn:A 0.1 -0.4 B -0.4 -0.2 gn: 9 10 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.8 30.2 B 30.3 31.6 mn:A -0.1 0.0 B -0.1 0.4 gn: 9 11 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b4s0g0 rms:A 32.1 31.2 B 29.7 29.8 mn:A -0.1 0.6 B 0.4 -0.4 gn: 5 6 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.0 29.9 B 28.8 27.8 mn:A 0.1 0.1 B -0.3 0.5 gn: 7 7 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.6 30.3 B 29.1 29.2 mn:A 0.7 -0.1 B 1.3 0.5 gn: 7 26 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.3 31.0 B 29.2 28.9 mn:A 0.9 -0.1 B -1.1 0.6 gn: 7 27 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.5 29.3 B 30.1 31.1 mn:A -0.1 1.4 B -0.5 -0.4 gn: 7 13 2013-Sep-25 00:10:58 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.8 27.7 B 29.8 30.0 mn:A 0.9 0.6 B -1.4 -0.8 gn: 8 14 2013-Sep-25 00:10:58 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Sep-25 00:10:58 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2013-Sep-25 00:10:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Sep-25 00:10:58 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Sep-25 00:10:59 LOG5 finish_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Sep-25 00:10:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:10:59 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Sep-25 00:10:59 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 00:10:59 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Sep-25 00:10:59 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Sep-25 00:10:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:10:59 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Sep-25 00:10:59 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 00:10:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 00:10:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 00:10:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Sep-25 00:10:59 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Sep-25 00:10:59 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Sep-25 00:10:59 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Sep-25 00:10:59 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 00:10:59 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 00:10:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 00:10:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:10:59 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 00:10:59 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2013-Sep-25 00:10:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Sep-25 00:10:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 00:10:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:10:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:10:59 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 00:11:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 00:11:00 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 00:11:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 00:11:00 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 00:11:00 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 00:11:00 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 00:11:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 00:11:00 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 00:11:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 00:11:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 00:11:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 00:11:00 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 00:11:00 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:11:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20130925.a2048.0000.fits 2013-Sep-25 00:11:00 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 00:11:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 00:11:00 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 00:11:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 00:11:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 00:11:00 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Sep-25 00:11:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Sep-25 00:11:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Sep-25 00:11:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 00:11:00 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130925.a2048.0000.fits} 2013-Sep-25 00:11:00 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 00:11:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Sep-25 00:11:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 00:11:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 00:11:00 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2013-Sep-25 00:11:00 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Sep-25 00:11:01 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 00:11:01 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2013-Sep-25 00:11:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Sep-25 00:11:01 LOG5 log_alfabeam: Parameters: 23.926222222222222 20.52847222222222 0.009314 2013.7337648934013 38.999912 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 0 23.926222222222293 20.528472222222220 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 1 23.928424587858853 20.426798261009033 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 2 23.932700748280730 20.494847514800973 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 3 23.930766414921230 20.597626122151496 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 4 23.924098567633187 20.630567608168434 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 5 23.919550372412196 20.558587119410451 2013-Sep-25 00:11:01 LOG4 log_alfabeam: ALFABEAM 6 23.921939968257345 20.457694565774887 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: object=NGC7817_p1_050 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: scantype=ON 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: patternid=326700153 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: scanid=326800001 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: topoafreqhz=1456253982.0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: topobfreqhz=1306253982.0 2013-Sep-25 00:11:01 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 00:11:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 00:11:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_050:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=326700153:scanid=326800001:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456253982.0:topobfreqhz=1306253982.0:filetype=1 2013-Sep-25 00:11:01 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 00:11:01 LOG5 begin_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2013-Sep-25 00:11:01 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 00:11:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 00:11:01 LOG5 end_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2013-Sep-25 00:11:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 00:11:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 00:11:01 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 00:11:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 00:11:01 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2013-Sep-25 00:11:02 LOG4 from_mock: From MOCK: starok 2013-Sep-25 00:11:02 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 00:11:02 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2013-Sep-25 00:11:02 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 00:11:02 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800001 2013-Sep-25 00:11:02 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 00:11:02 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2013-Sep-25 00:11:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 00:11:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 00:11:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 00:11:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Sep-25 00:11:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15063.00 2013-Sep-25 00:11:04 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 00:11:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 00:11:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:07 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:11:07.01 2013-Sep-25 00:11:07 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380082267.01 Wed Sep 25 00:11:07 2013 2013-Sep-25 00:11:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.253982 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-25 00:11:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-25 00:11:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 00:11:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.517 (still bad) 2013-Sep-25 00:11:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 00:11:13 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 00:11:13 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 00:11:13 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2013-Sep-25 00:11:13 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 00:11:13 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2013-Sep-25 00:11:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Sep-25 00:11:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Sep-25 00:11:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Sep-25 00:11:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Sep-25 00:11:13 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2013-Sep-25 00:11:13 LOG3 CALCONTROL-caltrig: Software trigger 2013-Sep-25 00:11:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Sep-25 00:11:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Sep-25 00:11:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Sep-25 00:11:13 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2013-Sep-25 00:11:13 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Sep-25 00:11:13 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 00:11:13 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2013-Sep-25 00:11:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Sep-25 00:11:13 LOG5 log_alfabeam: Parameters: 23.926222222222222 20.52847222222222 0.012935 2013.7337653053464 38.999912 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 0 23.926222222222222 20.528472222222220 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 1 23.928560810775082 20.427400331631020 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 2 23.932745763796731 20.496591495217121 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 3 23.930671247066520 20.598829507842428 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 4 23.923960892265988 20.629982510599142 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 5 23.919511780530502 20.556822504030563 2013-Sep-25 00:11:13 LOG4 log_alfabeam: ALFABEAM 6 23.922034986439247 20.456574302405365 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: object=NGC7817_p1_050 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 00:11:13 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: patternid=326700153 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: scanid=326800002 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: topoafreqhz=1456253982.0 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: topobfreqhz=1306253982.0 2013-Sep-25 00:11:14 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 00:11:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 00:11:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_050:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=326700153:scanid=326800002:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456253982.0:topobfreqhz=1306253982.0:filetype=1 2013-Sep-25 00:11:14 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 00:11:14 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2013-Sep-25 00:11:14 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 00:11:14 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 00:11:14 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2013-Sep-25 00:11:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 00:11:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 00:11:14 LOG3 socket_wait: To MOCK: STAR5 2013-Sep-25 00:11:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 00:11:14 LOG5 begin_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2013-Sep-25 00:11:14 LOG4 from_mock: From MOCK: starok 2013-Sep-25 00:11:14 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 00:11:14 LOG5 end_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2013-Sep-25 00:11:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 00:11:14 INFO2 take_data: Starting WAPP+Mock 5-second scan: 326800002 2013-Sep-25 00:11:15 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 00:11:15 LOG5 begin_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2013-Sep-25 00:11:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 00:11:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 00:11:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 00:11:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Sep-25 00:11:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15076.00 2013-Sep-25 00:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.083 and 1.517 (still bad) 2013-Sep-25 00:11:16 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 00:11:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Sep-25 00:11:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Sep-25 00:11:19 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:11:19.00 2013-Sep-25 00:11:19 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380082279.00 Wed Sep 25 00:11:19 2013 2013-Sep-25 00:11:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 00:11:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.253982 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-25 00:11:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-25 00:11:21 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Sep-25 00:11:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 00:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-25 00:11:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 00:11:25 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 00:11:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 00:11:25 LOG5 end_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 00:11:25 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Sep-25 00:11:25 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Sep-25 00:11:25 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Sep-25 00:11:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:11:25 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Sep-25 00:11:25 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Sep-25 00:11:25 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 157.44 and ZA = 2.44 2013-Sep-25 00:11:25 LOG3 track_source: Calling 'track_source NGC7817_p1_050 157.44 2.4405560942 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:11:25 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 00:11:25 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_050} INFO {Slewing to source 'NGC7817_p1_050' ...} 2013-Sep-25 00:11:25 INFO1 track_source: Starting to track NGC7817_p1_050 2013-Sep-25 00:11:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_050" 2013-Sep-25 00:11:25 LOG3 vw_send: To DATATAKING: set ra 157.44 2013-Sep-25 00:11:25 LOG3 vw_send: To DATATAKING: set dec 2.4405560942 2013-Sep-25 00:11:25 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 00:11:25 LOG3 vw_send: To DATATAKING: pnt tr 157.44 2.4405560942 -CF 2013-Sep-25 00:11:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:11:25 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 00:11:25 LOG5 finish_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 00:11:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:11:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 00:11:25 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Sep-25 00:11:25 LOG1 fixed_driftmap: Parameters: HA = +00:04:00.0 Start = 00:01:14.3 LST = 00:00:58.6 diff = 86415.7 secs 2013-Sep-25 00:11:26 INFO2 fixed_driftmap: Waiting 86413.7 seconds for RA 23:57:14 2013-Sep-25 00:11:26 INFO2 lstwait: Waiting for 13.7 secs from LST 00:00:59 to LST 00:01:12 ... 2013-Sep-25 00:11:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.675445931683161 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 00:11:26 START begin_task: Starting task 'waiting on wait on LST' 2013-Sep-25 00:11:26 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_050" 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: set ra 157.44 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: vw% 157.44 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: set dec 2.4405560942 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: 2.4405560942 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: pnt tr 157.44 2.4405560942 -CF 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:11:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 00:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-25 00:11:39 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Sep-25 00:11:39 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2013-Sep-25 00:11:39 LOG4 lstwait: Finished waiting 1.33 seconds late 2013-Sep-25 00:11:39 INFO3 lstwait: Finished waiting 2013-Sep-25 00:11:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:11:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Sep-25 00:11:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Sep-25 00:11:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Sep-25 00:11:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Sep-25 00:11:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Sep-25 00:11:40 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Sep-25 00:11:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Sep-25 00:11:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: projid=a2048 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: object=NGC7817_p1_050 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: patternid=326800003 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: scanid=326800003 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: prfeed=0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: topoafreqhz=1456253982.0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: topobfreqhz=1306253982.0 2013-Sep-25 00:11:40 TEST take_mock_data: PSET configuration: filetype=1 2013-Sep-25 00:11:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Sep-25 00:11:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC7817_p1_050:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=326800003:scanid=326800003:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456253982.0:topobfreqhz=1306253982.0:filetype=1 2013-Sep-25 00:11:40 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Sep-25 00:11:40 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2013-Sep-25 00:11:40 LOG4 from_mock: From MOCK: psetok 2013-Sep-25 00:11:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Sep-25 00:11:40 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2013-Sep-25 00:11:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Sep-25 00:11:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Sep-25 00:11:40 LOG3 socket_wait: To MOCK: STAR600 2013-Sep-25 00:11:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Sep-25 00:11:40 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2013-Sep-25 00:11:40 LOG4 from_mock: From MOCK: starok 2013-Sep-25 00:11:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Sep-25 00:11:40 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2013-Sep-25 00:11:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Sep-25 00:11:41 INFO2 take_data: Starting WAPP+Mock 600-second scan: 326800003 2013-Sep-25 00:11:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Sep-25 00:11:41 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2013-Sep-25 00:11:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Sep-25 00:11:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Sep-25 00:11:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Sep-25 00:11:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Sep-25 00:11:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15102.00 2013-Sep-25 00:11:42 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2013-Sep-25 00:11:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Sep-25 00:11:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Sep-25 00:11:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.253982 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 740.000000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 830.000000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.253982 MHz Flip = 1 Band = 0 Mixer = 1595.000000 MHz 2013-Sep-25 00:11:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Sep-25 00:11:43 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2013-Sep-25 00:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.088 (still bad) 2013-Sep-25 00:11:45 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2013-Sep-25 00:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:11:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 00:11:46.01 2013-Sep-25 00:11:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1380082306.01 Wed Sep 25 00:11:46 2013 2013-Sep-25 00:11:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Sep-25 00:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:11:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:11:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.100 (still bad) 2013-Sep-25 00:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:11:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:11:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.921 0.904 0.924 2013-Sep-25 00:11:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 1.076 0.978 1.053 2013-Sep-25 00:11:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.015 0.923 0.069 2013-Sep-25 00:11:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 1.019 0.901 0.949 2013-Sep-25 00:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-25 00:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:12:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.080 (still bad) 2013-Sep-25 00:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:12:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.074 (still bad) 2013-Sep-25 00:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.076 (still bad) 2013-Sep-25 00:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:12:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.078 (still bad) 2013-Sep-25 00:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:12:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.080 (still bad) 2013-Sep-25 00:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-25 00:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.082 (still bad) 2013-Sep-25 00:12:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:12:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.906 0.903 0.912 2013-Sep-25 00:12:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 1.073 0.968 1.044 2013-Sep-25 00:12:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.024 1.008 0.922 0.069 2013-Sep-25 00:12:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 1.006 0.895 0.939 2013-Sep-25 00:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:13:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.074 (still bad) 2013-Sep-25 00:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.082 (still bad) 2013-Sep-25 00:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:13:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.080 (still bad) 2013-Sep-25 00:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:13:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.080 (still bad) 2013-Sep-25 00:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.100 (still bad) 2013-Sep-25 00:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.103 (still bad) 2013-Sep-25 00:13:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:13:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 00:13:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.896 0.898 0.899 2013-Sep-25 00:13:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.899 1.061 0.953 1.034 2013-Sep-25 00:13:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 0.999 0.914 0.068 2013-Sep-25 00:13:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.995 0.888 0.928 2013-Sep-25 00:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.096 (still bad) 2013-Sep-25 00:14:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.098 (still bad) 2013-Sep-25 00:14:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.090 (still bad) 2013-Sep-25 00:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.077 (still bad) 2013-Sep-25 00:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.104 (still bad) 2013-Sep-25 00:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.091 (still bad) 2013-Sep-25 00:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.120 (still bad) 2013-Sep-25 00:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.139 (still bad) 2013-Sep-25 00:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.162 (still bad) 2013-Sep-25 00:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.217 (still bad) 2013-Sep-25 00:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.192 (still bad) 2013-Sep-25 00:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.196 (still bad) 2013-Sep-25 00:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.178 (still bad) 2013-Sep-25 00:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.137 (still bad) 2013-Sep-25 00:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.101 (still bad) 2013-Sep-25 00:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.105 (still bad) 2013-Sep-25 00:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.063 (still bad) 2013-Sep-25 00:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-25 00:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.087 (still bad) 2013-Sep-25 00:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.099 (still bad) 2013-Sep-25 00:15:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:15:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.898 0.897 0.897 2013-Sep-25 00:15:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.902 1.062 0.960 1.039 2013-Sep-25 00:15:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 1.104 0.917 0.069 2013-Sep-25 00:15:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.995 0.887 0.927 2013-Sep-25 00:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.148 (still bad) 2013-Sep-25 00:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.110 (still bad) 2013-Sep-25 00:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.105 (still bad) 2013-Sep-25 00:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-25 00:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-25 00:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.060 (still bad) 2013-Sep-25 00:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.076 and 1.095 (still bad) 2013-Sep-25 00:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.061 (still bad) 2013-Sep-25 00:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.071 (still bad) 2013-Sep-25 00:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.061 (still bad) 2013-Sep-25 00:15:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.063 (still bad) 2013-Sep-25 00:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-25 00:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.075 (still bad) 2013-Sep-25 00:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-25 00:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:15:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-25 00:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.064 (still bad) 2013-Sep-25 00:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-25 00:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.075 (still bad) 2013-Sep-25 00:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-25 00:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:15:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-25 00:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.079 (still bad) 2013-Sep-25 00:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-25 00:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:16:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:16:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.913 0.905 0.915 2013-Sep-25 00:16:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 1.072 0.964 1.043 2013-Sep-25 00:16:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.006 0.928 0.069 2013-Sep-25 00:16:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 1.008 0.896 0.940 2013-Sep-25 00:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.079 (still bad) 2013-Sep-25 00:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:16:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-25 00:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.077 (still bad) 2013-Sep-25 00:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.068 (still bad) 2013-Sep-25 00:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:16:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.070 (still bad) 2013-Sep-25 00:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.082 (still bad) 2013-Sep-25 00:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-25 00:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:16:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-25 00:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.082 (still bad) 2013-Sep-25 00:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-25 00:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:16:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-25 00:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-25 00:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.074 (still bad) 2013-Sep-25 00:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.079 and 1.102 (still bad) 2013-Sep-25 00:17:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:17:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:17:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.912 0.904 0.909 2013-Sep-25 00:17:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 1.084 0.975 1.053 2013-Sep-25 00:17:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.012 0.925 0.069 2013-Sep-25 00:17:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 1.003 0.893 0.937 2013-Sep-25 00:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-25 00:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.073 (still bad) 2013-Sep-25 00:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.102 (still bad) 2013-Sep-25 00:17:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-25 00:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.073 (still bad) 2013-Sep-25 00:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.102 (still bad) 2013-Sep-25 00:17:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-25 00:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.073 (still bad) 2013-Sep-25 00:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:17:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.101 (still bad) 2013-Sep-25 00:17:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.085 (still bad) 2013-Sep-25 00:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.087 (still bad) 2013-Sep-25 00:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.074 (still bad) 2013-Sep-25 00:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.099 (still bad) 2013-Sep-25 00:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.063 (still bad) 2013-Sep-25 00:18:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.098 (still bad) 2013-Sep-25 00:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:18:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.069 < 0.75)! 2013-Sep-25 00:18:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.927 0.910 0.925 2013-Sep-25 00:18:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 1.085 0.976 1.053 2013-Sep-25 00:18:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.030 1.018 0.926 0.069 2013-Sep-25 00:18:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 1.024 0.908 0.955 2013-Sep-25 00:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.089 (still bad) 2013-Sep-25 00:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.074 (still bad) 2013-Sep-25 00:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:18:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.103 (still bad) 2013-Sep-25 00:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-25 00:18:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:18:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.099 (still bad) 2013-Sep-25 00:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:18:33 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:18:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.079 (still bad) 2013-Sep-25 00:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-25 00:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:18:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.079 (still bad) 2013-Sep-25 00:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:19:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:19:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 00:19:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.922 0.906 0.917 2013-Sep-25 00:19:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 1.071 0.970 1.052 2013-Sep-25 00:19:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.006 0.918 0.068 2013-Sep-25 00:19:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 1.009 0.896 0.942 2013-Sep-25 00:19:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.074 (still bad) 2013-Sep-25 00:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:19:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.071 and 1.082 (still bad) 2013-Sep-25 00:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-25 00:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-25 00:19:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-25 00:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.069 (still bad) 2013-Sep-25 00:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.083 (still bad) 2013-Sep-25 00:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.075 (still bad) 2013-Sep-25 00:19:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.076 (still bad) 2013-Sep-25 00:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.071 (still bad) 2013-Sep-25 00:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-25 00:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.084 (still bad) 2013-Sep-25 00:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-25 00:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:19:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.072 (still bad) 2013-Sep-25 00:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.070 and 1.079 (still bad) 2013-Sep-25 00:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.072 (still bad) 2013-Sep-25 00:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.069 (still bad) 2013-Sep-25 00:20:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.075 (still bad) 2013-Sep-25 00:20:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.070 < 0.75)! 2013-Sep-25 00:20:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.915 0.904 0.915 2013-Sep-25 00:20:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 1.077 0.976 1.054 2013-Sep-25 00:20:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.016 0.929 0.070 2013-Sep-25 00:20:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 1.017 0.906 0.950 2013-Sep-25 00:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:20:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.062 (still bad) 2013-Sep-25 00:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.073 (still bad) 2013-Sep-25 00:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.067 (still bad) 2013-Sep-25 00:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.059 (still bad) 2013-Sep-25 00:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.077 and 1.097 (still bad) 2013-Sep-25 00:20:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.063 (still bad) 2013-Sep-25 00:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.077 (still bad) 2013-Sep-25 00:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.068 (still bad) 2013-Sep-25 00:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.062 (still bad) 2013-Sep-25 00:20:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.097 (still bad) 2013-Sep-25 00:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.064 (still bad) 2013-Sep-25 00:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.078 (still bad) 2013-Sep-25 00:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.063 (still bad) 2013-Sep-25 00:20:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.100 (still bad) 2013-Sep-25 00:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.063 (still bad) 2013-Sep-25 00:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.080 (still bad) 2013-Sep-25 00:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.070 (still bad) 2013-Sep-25 00:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.063 (still bad) 2013-Sep-25 00:21:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.099 (still bad) 2013-Sep-25 00:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:21:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 00:21:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.917 0.910 0.920 2013-Sep-25 00:21:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.901 1.071 0.966 1.048 2013-Sep-25 00:21:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.005 0.920 0.068 2013-Sep-25 00:21:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 1.007 0.898 0.938 2013-Sep-25 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.061 (still bad) 2013-Sep-25 00:21:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.098 (still bad) 2013-Sep-25 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.083 (still bad) 2013-Sep-25 00:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.062 (still bad) 2013-Sep-25 00:21:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.097 (still bad) 2013-Sep-25 00:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.081 (still bad) 2013-Sep-25 00:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.084 (still bad) 2013-Sep-25 00:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.071 (still bad) 2013-Sep-25 00:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.065 (still bad) 2013-Sep-25 00:21:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Sep-25 00:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.078 and 1.099 (still bad) 2013-Sep-25 00:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.068 and 1.066 (still bad) 2013-Sep-25 00:21:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Sep-25 00:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.082 (still bad) 2013-Sep-25 00:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:21:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Sep-25 00:21:47 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Sep-25 00:21:47 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Sep-25 00:21:47 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2013-Sep-25 00:21:47 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Sep-25 00:21:47 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Sep-25 00:21:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Sep-25 00:21:47 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2013-Sep-25 00:21:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Sep-25 00:21:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Sep-25 00:21:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Sep-25 00:21:47 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2013-Sep-25 00:21:47 COMMAND run_command_line: EXECUTING command 65: 'ENDIF' 2013-Sep-25 00:21:47 COMMAND run_command_line: EXECUTING command 68: 'IF LSTSLEW(NGC7817_p1_052) < 001414 THEN' 2013-Sep-25 00:21:49 LOG3 is_if_valid: Current source data: up 483.9 4.0 UP - - 69 1.4 2013-Sep-25 00:21:49 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC7817_p1_052) < 001414 2013-Sep-25 00:21:49 INFO5 is_if_valid: Condition parsed as: 0.21286133333333335 < 0.23722222222222222 2013-Sep-25 00:21:49 COMMAND run_command_line: EXECUTING command 69: 'FIXEDDRIFT az=119.47 alfaangle=77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC7817_p1_052 ra=235630.00 dec=202830.00' 2013-Sep-25 00:21:49 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Sep-25 00:21:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Sep-25 00:21:50 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 119.47 77.2 hcorcal 5 tracking no off lcorcal first 1 NGC7817_p1_052 235630.00 202830.00 J 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:21:50 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Sep-25 00:21:50 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2013-Sep-25 00:21:50 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC7817_p1_050' 2013-Sep-25 00:21:50 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Sep-25 00:21:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC7817_p1_052} 2013-Sep-25 00:21:50 INFO3 fixed_driftmap: Sending telescope to Az = 119.47 and ZA = 4.57 2013-Sep-25 00:21:50 LOG3 track_source: Calling 'track_source NGC7817_p1_052 119.47 4.5723357703 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:21:50 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 00:21:50 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Sep-25 00:21:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_052} INFO {Slewing to source 'NGC7817_p1_052' ...} 2013-Sep-25 00:21:50 INFO1 track_source: Starting to track NGC7817_p1_052 2013-Sep-25 00:21:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_052" 2013-Sep-25 00:21:50 LOG3 vw_send: To DATATAKING: set ra 119.47 2013-Sep-25 00:21:50 LOG3 vw_send: To DATATAKING: set dec 4.5723357703 2013-Sep-25 00:21:50 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 00:21:50 LOG3 vw_send: To DATATAKING: pnt tr 119.47 4.5723357703 -CF 2013-Sep-25 00:21:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:21:50 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 00:21:50 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Sep-25 00:21:50 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 00:21:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:21:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 00:21:50 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Sep-25 00:21:50 START begin_task: Starting task 'rotate ALFA to +77.2 degrees' 2013-Sep-25 00:21:50 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Sep-25 00:21:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +77.2 degrees ...} 2013-Sep-25 00:21:50 INFO2 rotate_alfa: ALFA commanded to +77.2 degrees 2013-Sep-25 00:21:50 LOG3 sock_errsend: To ALFAMOTOR: POSITION 77.2 REPLY 2013-Sep-25 00:21:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Sep-25 00:21:51 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Sep-25 00:21:51 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_052" 2013-Sep-25 00:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.069 and 1.079 (still bad) 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: set ra 119.47 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: vw% 119.47 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: set dec 4.5723357703 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: 4.5723357703 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: pnt tr 119.47 4.5723357703 -CF 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:21:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 00:22:13 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Sep-25 00:22:13 INFO3 alfa_motor: ALFA rotator in-position +77.20 degrees 2013-Sep-25 00:22:13 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Sep-25 00:22:13 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2013-Sep-25 00:22:13 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:22:13 STOP finish_task: Finishing task 'rotate ALFA to +77.2 degrees' 2013-Sep-25 00:22:13 LOG5 finish_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Sep-25 00:22:13 INFO2 finish_task: DONE finished configuration: rotating ALFA to +77.2 degrees 2013-Sep-25 00:22:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:22:13 STOP end_task: Finishing task 'rotate ALFA to +77.2 degrees' with status 'OK' 2013-Sep-25 00:22:13 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Sep-25 00:22:13 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 00:22:13 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Sep-25 00:22:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 00:22:13 LOG3 waittrk: Start waittrk 5 2013-Sep-25 00:22:13 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 00:22:13 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2013-Sep-25 00:22:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 00:22:18 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2013-Sep-25 00:22:18 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 00:22:19 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2013-Sep-25 00:23:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 00:23:33 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2013-Sep-25 00:23:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:23:33 INFO2 waittrk: Now tracking NGC7817_p1_052 2013-Sep-25 00:23:33 LOG4 waittrk: Current telescope position: Az = 479.29 ZA = 4.57 2013-Sep-25 00:23:33 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 00:23:33 LOG5 finish_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Sep-25 00:23:33 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 00:23:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:23:34 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 00:23:34 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 START begin_task: Starting task 'selecting calibration type' 2013-Sep-25 00:23:34 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Sep-25 00:23:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Sep-25 00:23:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:23:34 START begin_task: Starting task 'waiting on setcal' 2013-Sep-25 00:23:34 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Sep-25 00:23:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:23:34 LOG4 got_cormsg: From DATATAKING: vw% DONE 2013-Sep-25 00:23:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Sep-25 00:23:34 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Sep-25 00:23:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 00:23:34 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Sep-25 00:23:34 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 00:23:34 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 00:23:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 00:23:34 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 00:23:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Sep-25 00:23:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Sep-25 00:23:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Sep-25 00:23:34 START begin_task: Starting task 'waiting on command to ALFA' 2013-Sep-25 00:23:34 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:34 LOG4 got_alfamon: From ALFAMON: ACK 2013-Sep-25 00:23:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Sep-25 00:23:34 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2013-Sep-25 00:23:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Sep-25 00:23:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Sep-25 00:23:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Sep-25 00:23:35 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2013-Sep-25 00:23:35 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Sep-25 00:23:35 INFO2 astwait: Waiting for 3 seconds from 04:23:35 to 04:23:38 UTC ... 2013-Sep-25 00:23:35 LOG4 send_obs_status: To obs_status: <1> TASKTIME 3 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Sep-25 00:23:35 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Sep-25 00:23:35 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Sep-25 00:23:38 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Sep-25 00:23:38 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Sep-25 00:23:38 INFO3 astwait: Finished waiting 2013-Sep-25 00:23:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:23:38 LOG5 dopset_later: Calling 'dopset_later 60.711808307773687' 2013-Sep-25 00:23:38 INFO3 dopset_later: Setting Doppler correction for 00:24:38 (60.7 seconds from now) 2013-Sep-25 00:23:38 LOG5 antvel: Calling 'antvel 119.470000 4.572336 F Heliocentric 60.711808307773687' 2013-Sep-25 00:23:38 LOG2 antvel: Transforming current Az = 119.47 ZA = 4.57 to apparent RA = 23:57:14.1 Dec = +20:33:17.8 2013-Sep-25 00:23:38 LOG2 antvel: Parameters to Doppler: Heliocentric 15878 2013 268 0.0 2013-Sep-25 00:23:38 INFO5 antvel: Computed antenna velocity: -2.25266 km/s 2013-Sep-25 00:23:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-2.2526588398 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Sep-25 00:23:38 INFO4 dopset_gen: New sky frequencies: 1381.253807 1381.253807 1381.253807 1381.253807 1381.253807 1381.253807 1381.253807 1381.253807 1381.253807 2013-Sep-25 00:23:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.253807 sky0=1381.253807 sky1=1381.253807 sky2=1381.253807 sky3=1381.253807 sky4=1381.253807 sky5=1381.253807 sky6=1381.253807 sky7=1381.253807 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Sep-25 00:23:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.253807 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631253807.0} 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 00:23:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Sep-25 00:23:38 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Sep-25 00:23:38 INFO5 fixed_driftmap: Tracking J2000 position: RA = 23:55:34.3 Dec = +20:28:42.5 2013-Sep-25 00:23:38 LOG3 track_source: Calling 'track_source NGC7817_p1_052 235534.3 202842.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Sep-25 00:23:38 START begin_task: Starting task 'sending tracking commands' 2013-Sep-25 00:23:38 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Sep-25 00:23:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC7817_p1_052} INFO {Slewing to source 'NGC7817_p1_052' ...} 2013-Sep-25 00:23:38 INFO1 track_source: Starting to track NGC7817_p1_052 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC7817_p1_052" 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: set ra 235534.3 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: set dec 202842.5 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: pnt tr 235534.3 202842.5 -CJ 2013-Sep-25 00:23:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:23:38 STOP finish_task: Finishing task 'sending tracking commands' 2013-Sep-25 00:23:38 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Sep-25 00:23:38 INFO2 finish_task: DONE finished sending: tracking commands 2013-Sep-25 00:23:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:23:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Sep-25 00:23:39 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Sep-25 00:23:39 START begin_task: Starting task 'waiting on telescope' 2013-Sep-25 00:23:39 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Sep-25 00:23:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Sep-25 00:23:39 LOG3 waittrk: Start waittrk 5 2013-Sep-25 00:23:39 START begin_task: Starting task 'waiting on telescope movement' 2013-Sep-25 00:23:39 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631253807.0} 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC7817_p1_052" 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: set ra 235534.3 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% 235534.3 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: set dec 202842.5 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: 202842.5 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: pnt tr 235534.3 202842.5 -CJ 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Sep-25 00:23:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Sep-25 00:23:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Sep-25 00:23:44 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2013-Sep-25 00:23:44 START begin_task: Starting task 'waiting on telescope on source' 2013-Sep-25 00:23:44 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2013-Sep-25 00:23:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Sep-25 00:23:50 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2013-Sep-25 00:23:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Sep-25 00:23:50 INFO2 waittrk: Now tracking NGC7817_p1_052 2013-Sep-25 00:23:50 LOG4 waittrk: Current telescope position: Az = 479.13 ZA = 4.60 2013-Sep-25 00:23:50 STOP finish_task: Finishing task 'waiting on telescope' 2013-Sep-25 00:23:50 LOG5 finish_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Sep-25 00:23:50 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Sep-25 00:23:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:23:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Sep-25 00:23:50 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Sep-25 00:23:50 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Sep-25 00:23:50 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2013-Sep-25 00:23:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Sep-25 00:23:50 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Sep-25 00:23:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Sep-25 00:23:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Sep-25 00:23:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:23:51 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Sep-25 00:23:51 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2013-Sep-25 00:23:51 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Sep-25 00:23:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Sep-25 00:23:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:53 LOG4 got_cormsg: From DATATAKING: DONE 2013-Sep-25 00:23:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Sep-25 00:23:53 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2013-Sep-25 00:23:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Sep-25 00:23:53 START begin_task: Starting task 'adjusting WAPP power' 2013-Sep-25 00:23:53 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Sep-25 00:23:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 00:23:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:23:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:23:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:23:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Sep-25 00:23:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Sep-25 00:23:54 LOG5 begin_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2013-Sep-25 00:23:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Sep-25 00:23:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Sep-25 00:23:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 7 dB 2013-Sep-25 00:23:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 6 dB --- beam 3: 6 4 dB 2013-Sep-25 00:23:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 0 dB 2013-Sep-25 00:23:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 8 3 dB --- beam 7: 9 4 dB 2013-Sep-25 00:23:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Sep-25 00:23:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Sep-25 00:23:54 LOG5 end_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2013-Sep-25 00:23:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.038 0.908 ALFA beam 1: 0.942 1.164 2013-Sep-25 00:23:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.955 1.099 ALFA beam 3: 0.970 1.022 2013-Sep-25 00:23:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.026 0.974 ALFA beam 5: 0.919 0.068 2013-Sep-25 00:23:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.025 1.002 ALFA beam 7: 0.889 0.935 2013-Sep-25 00:23:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Sep-25 00:23:54 LOG5 finish_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Sep-25 00:23:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Sep-25 00:23:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Sep-25 00:23:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Sep-25 00:23:54 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Sep-25 00:23:55 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Sep-25 00:23:55 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2013-Sep-25 00:23:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Sep-25 00:23:55 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Sep-25 00:23:55 LOG3 socket_wait: To MOCK: ADJP30 2013-Sep-25 00:23:55 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Sep-25 00:23:55 LOG5 begin_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2013-Sep-25 00:23:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.068 < 0.75)! 2013-Sep-25 00:23:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 0.908 0.942 1.164 2013-Sep-25 00:23:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 1.099 0.970 1.022 2013-Sep-25 00:23:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 0.974 0.919 0.068 2013-Sep-25 00:23:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 1.002 0.889 0.935 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.4 26.7 B 31.9 32.2 mn:A 0.4 0.5 B 0.2 0.8 gn: 8 12 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.1 30.7 B 28.1 29.8 mn:A 1.0 0.3 B 0.3 0.1 gn: 10 12 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.8 27.8 B 34.3 28.8 mn:A -0.1 -0.4 B -0.1 0.9 gn: 10 9 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b1s1g0 rms:A 33.6 31.0 B 30.1 30.1 mn:A 1.2 0.9 B 0.8 1.2 gn: 12 8 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 29.1 30.6 mn:A 0.3 -0.1 B 0.4 0.2 gn: 6 9 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.2 30.4 B 32.8 30.5 mn:A 0.1 -0.5 B -0.2 0.4 gn: 7 10 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.4 31.0 B 33.0 29.5 mn:A 0.2 -0.4 B -0.3 -0.3 gn: 9 11 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.4 30.7 B 30.0 31.3 mn:A -0.1 0.0 B -0.1 0.2 gn: 9 11 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b4s0g0 rms:A 32.1 31.1 B 29.4 29.5 mn:A -0.2 0.6 B 0.4 -0.5 gn: 5 6 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.1 30.0 B 31.0 29.9 mn:A 0.1 0.2 B -0.2 0.6 gn: 7 8 2013-Sep-25 00:24:00 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.6 30.3 B 29.1 29.1 mn:A 0.9 -0.2 B 1.4 0