2013-Feb-22 01:43:17 BEGIN executive: CIMA executive starting ... 2013-Feb-22 01:43:17 NOTE executive: STARTING NEW CIMA SESSION 2013-Feb-22 01:43:17 INFO1 executive: Using CIMA version 3.3.04 'stable' from 2012-11-29 16:58 2013-Feb-22 01:43:17 INFO4 executive: This is an ON-LINE session 2013-Feb-22 01:43:17 INFO4 executive: This is a LOCAL session 2013-Feb-22 01:43:17 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2013-Feb-22 01:43:17 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Israel Cabrera' 2013-Feb-22 01:43:18 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20130222' 2013-Feb-22 01:43:18 LOG2 log_preferences: Currently applied preferences: 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(dailylog) = daily 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(offlinelog) = write 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(datawindow) = ignore 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(limitwarning) = enabled 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(wappfailure) = abort 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(helpstyle) = stay-open 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(logcolours) = full 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(displaylevel) = LOG5 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(loglevel) = LOG5 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(displayformat) = long 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(logformat) = new 2013-Feb-22 01:43:18 LOG2 log_preferences: prefs(fontsize) = 4 2013-Feb-22 01:43:18 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2013-Feb-22 01:43:18 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2013-Feb-22 01:43:18 ALERT executive: CIMA executive ready 2013-Feb-22 01:43:20 NOTE frontend: CIMA frontend ready 2013-Feb-22 01:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:43:20 LOG4 got_cormsg: From DATATAKING: setup 2013-Feb-22 01:43:22 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2013-Feb-22 01:43:22 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2013-Feb-22 01:43:22 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2013-Feb-22 01:43:22 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2013-Feb-22 01:43:22 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Feb-22 01:43:22 NOTE select_receiver: Starting to select receiver ALFA 2013-Feb-22 01:43:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Feb-22 01:43:22 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Feb-22 01:43:22 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Feb-22 01:43:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Feb-22 01:43:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Feb-22 01:43:22 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Feb-22 01:43:22 DONE finish_task: DONE finished selecting: receiver ALFA 2013-Feb-22 01:43:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:43:22 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Feb-22 01:43:22 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% io 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% tape off 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% connectall 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:43:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:43:33 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2013-Feb-22 01:43:52 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2013-Feb-22 01:43:52 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 59 - 82) 2013-Feb-22 01:43:52 INFO4 CIMA-load_command_file: Loaded command file '130222.cmd' 2013-Feb-22 01:43:54 INFO1 CIMA-run_command_file: Transferring command file '130222.cmd' to executive ... 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES1367_p3_002) < 112312 THEN} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=218.18 alfaangle=-15.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_002 ra=113400.00 dec=214830.00} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES1367_p3_004) < 114612 THEN} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=141.42 alfaangle=54.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_004 ra=113400.00 dec=214530.00} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES1367_p3_006) < 120912 THEN} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=113.46 alfaangle=85.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_006 ra=113400.00 dec=214230.00} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES1367_p3_008) < 123212 THEN} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=105.83 alfaangle=-83.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_008 ra=113400.00 dec=213930.00} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 63 {LOAD togs_cima33.conf} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 64 {CATALOG togs_ages.cat} 2013-Feb-22 01:43:54 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {IF isup(galfasrc) then} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 66 {GOTO galfasrc} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 67 {ELSEIF isup(galfasrc2) then} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 68 {GOTO galfasrc2} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 69 {ELSE} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 70 {TRACKCURPOS} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 71 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 72 {ENDIF} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 73 {ALFAANGLE 19} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 74 {WAITTRACK} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 78 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 86 {LOAD ages_mock_cima33.conf} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 87 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 88 {CATALOG AGESFull.cat} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 91 {IF LSTSLEW(NGC5523_p2_019) < 132436 THEN} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 92 {FIXEDDRIFT az=232.93 alfaangle=-34.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_019 ra=141000.00 dec=255300.00} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 95 {ENDIF} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 98 {IF LSTSLEW(NGC5523_p2_021) < 133606 THEN} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 99 {FIXEDDRIFT az=225.60 alfaangle=-25.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_021 ra=141000.00 dec=255000.00} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 50 102 {ENDIF} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 51 105 {IF LSTSLEW(NGC5523_p2_023) < 134736 THEN} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 52 106 {FIXEDDRIFT az=214.86 alfaangle=-13.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_023 ra=141000.00 dec=254700.00} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 53 109 {ENDIF} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 54 112 {IF LSTSLEW(NGC5523_p2_025) < 135906 THEN} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 55 113 {FIXEDDRIFT az=199.50 alfaangle=1.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_025 ra=141000.00 dec=254400.00} 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: store_command_file_line 56 116 {ENDIF} 2013-Feb-22 01:43:55 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 1 1 56 2013-Feb-22 01:43:55 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 1 1 56' 2013-Feb-22 01:43:55 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 01:43:55 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2013-Feb-22 01:43:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 01:43:55 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 1 2013-Feb-22 01:43:55 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2013-Feb-22 01:43:55 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Feb-22 01:43:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 01:43:55 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Feb-22 01:43:55 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Feb-22 01:43:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Feb-22 01:43:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 01:43:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Feb-22 01:43:57 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Feb-22 01:43:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Feb-22 01:43:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Feb-22 01:43:58 INFO1 config_iflo: Selecting receiver ALFA 2013-Feb-22 01:43:58 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2013-Feb-22 01:43:58 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2013-Feb-22 01:43:58 START begin_task: Starting task 'selecting receiver ALFA' 2013-Feb-22 01:43:58 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Feb-22 01:43:58 NOTE select_receiver: Starting to select receiver ALFA 2013-Feb-22 01:43:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Feb-22 01:43:58 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Feb-22 01:43:58 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Feb-22 01:43:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Feb-22 01:43:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Feb-22 01:43:58 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Feb-22 01:43:58 INFO2 finish_task: DONE finished selecting: receiver ALFA 2013-Feb-22 01:43:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:43:58 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Feb-22 01:43:58 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Feb-22 01:43:58 START begin_task: Starting task 'waiting for receiver ALFA' 2013-Feb-22 01:43:58 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Feb-22 01:43:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 105.1 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2013-Feb-22 01:43:58 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2013-Feb-22 01:43:58 LOG5 begin_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2013-Feb-22 01:43:58 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Feb-22 01:43:58 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Feb-22 01:45:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:37 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2013-Feb-22 01:45:37 LOG5 end_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2013-Feb-22 01:45:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2013-Feb-22 01:45:37 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2013-Feb-22 01:45:37 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Feb-22 01:45:37 INFO1 config_iflo: Configuring rest of the IF/LO path 2013-Feb-22 01:45:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2013-Feb-22 01:45:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 01:45:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:45:37 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 01:45:37 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Feb-22 01:45:37 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 01:45:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 01:45:37 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Feb-22 01:45:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 01:45:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:45:37 LOG3 vw_send: To DATATAKING: alfafb 1 2013-Feb-22 01:45:37 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2013-Feb-22 01:45:38 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2013-Feb-22 01:45:38 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2013-Feb-22 01:45:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Feb-22 01:45:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:45:38 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Feb-22 01:45:38 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: alfafb 1 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2013-Feb-22 01:45:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:51 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:45:51 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Feb-22 01:45:51 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2013-Feb-22 01:45:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Feb-22 01:45:51 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Feb-22 01:45:51 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Feb-22 01:45:51 DONE finish_task: DONE finished configuration: IF/LO path 2013-Feb-22 01:45:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:45:51 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Feb-22 01:45:51 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Feb-22 01:45:51 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Feb-22 01:45:51 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2013-Feb-22 01:45:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Feb-22 01:45:51 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Feb-22 01:45:51 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 01:45:51 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 01:45:51 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2013-Feb-22 01:45:51 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 01:45:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 01:45:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:45:51 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 01:45:52 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2013-Feb-22 01:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:52 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 01:45:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:52 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:45:52 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 01:45:52 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2013-Feb-22 01:45:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 01:45:52 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 01:45:52 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2013-Feb-22 01:45:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 01:45:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 01:45:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:45:52 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Feb-22 01:45:52 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:45:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:45:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:45:52 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Feb-22 01:45:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 01:45:53 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 01:45:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:45:53 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2013-Feb-22 01:45:53 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:45:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:45:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:45:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:45:53 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:45:53 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Feb-22 01:45:53 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2013-Feb-22 01:45:53 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Feb-22 01:45:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:45:53 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Feb-22 01:45:53 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2013-Feb-22 01:45:53 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2013-Feb-22 01:45:53 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Feb-22 01:45:53 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2013-Feb-22 01:45:54 LOG3 is_if_valid: Current source data: down 252.0 36.0 73 - - 231 6.5 2013-Feb-22 01:45:54 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Feb-22 01:45:54 INFO5 is_if_valid: Condition parsed as: 0 2013-Feb-22 01:45:54 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2013-Feb-22 01:45:54 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2013-Feb-22 01:45:54 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2013-Feb-22 01:45:54 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2013-Feb-22 01:45:54 LOG3 is_if_valid: Current source data: up 150.6 1.6 UP - - 80 2.5 2013-Feb-22 01:45:54 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2013-Feb-22 01:45:54 INFO5 is_if_valid: Condition parsed as: 1 2013-Feb-22 01:45:54 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2013-Feb-22 01:45:54 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2013-Feb-22 01:45:54 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2013-Feb-22 01:45:54 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2013-Feb-22 01:45:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2013-Feb-22 01:45:54 LOG3 track_source: Calling 'track_source galfasrc2 112400.0 +195000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Feb-22 01:45:54 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 01:45:54 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2013-Feb-22 01:45:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2013-Feb-22 01:45:54 INFO1 track_source: Starting to track galfasrc2 2013-Feb-22 01:45:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2013-Feb-22 01:45:54 LOG3 vw_send: To DATATAKING: set ra 112400.0 2013-Feb-22 01:45:54 LOG3 vw_send: To DATATAKING: set dec +195000 2013-Feb-22 01:45:54 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 01:45:54 LOG3 vw_send: To DATATAKING: pnt tr 112400.0 +195000 -CJ 2013-Feb-22 01:45:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Feb-22 01:45:55 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 01:45:55 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2013-Feb-22 01:45:55 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 01:45:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:45:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 01:45:55 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2013-Feb-22 01:45:55 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2013-Feb-22 01:45:55 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2013-Feb-22 01:45:55 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2013-Feb-22 01:45:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:45:55 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2013-Feb-22 01:45:55 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2013-Feb-22 01:45:55 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2013-Feb-22 01:45:55 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Feb-22 01:45:55 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2013-Feb-22 01:45:55 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Feb-22 01:45:55 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Feb-22 01:45:55 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Feb-22 01:45:55 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2013-Feb-22 01:45:55 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2013-Feb-22 01:45:55 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Feb-22 01:45:55 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Feb-22 01:45:55 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2013-Feb-22 01:45:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Feb-22 01:45:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Feb-22 01:45:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Feb-22 01:45:55 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 01:45:55 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 01:45:55 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2013-Feb-22 01:45:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20130222.a2048.0000.fits 2013-Feb-22 01:45:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:45:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2013-Feb-22 01:45:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Feb-22 01:45:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 01:45:56 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20130222.a2048.0000.fits} 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: set ra 112400.0 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: vw% 112400.0 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: set dec +195000 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: +195000 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: pnt tr 112400.0 +195000 -CJ 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Feb-22 01:45:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:45:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 01:46:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 01:46:29 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Feb-22 01:46:29 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 01:46:29 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2013-Feb-22 01:46:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 01:46:29 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Feb-22 01:46:29 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2013-Feb-22 01:46:29 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Feb-22 01:46:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:46:29 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Feb-22 01:46:29 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2013-Feb-22 01:46:29 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2013-Feb-22 01:46:29 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Feb-22 01:46:29 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2013-Feb-22 01:46:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 01:46:29 LOG3 waittrk: Start waittrk 5 2013-Feb-22 01:46:29 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 01:46:29 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Feb-22 01:46:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 01:46:34 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Feb-22 01:46:34 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 01:46:34 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2013-Feb-22 01:47:20 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.80) to the zenith angle limit 1.06 degrees! 2013-Feb-22 01:47:20 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 178.8772 1.7974 RA/Dec = 11:24:00 +19:50:00 2013-Feb-22 01:49:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 01:49:17 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2013-Feb-22 01:49:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 01:49:17 INFO2 waittrk: Now tracking galfasrc2 2013-Feb-22 01:49:17 LOG4 waittrk: Current telescope position: Az = 131.41 ZA = 2.12 2013-Feb-22 01:49:17 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 01:49:17 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2013-Feb-22 01:49:17 DONE finish_task: DONE finished waiting: telescope on source 2013-Feb-22 01:49:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:49:17 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 01:49:17 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2013-Feb-22 01:49:17 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Feb-22 01:49:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Feb-22 01:49:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 01:49:18 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Feb-22 01:49:18 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Feb-22 01:49:18 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2013-Feb-22 01:49:18 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2013-Feb-22 01:49:18 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Feb-22 01:49:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Feb-22 01:49:18 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 01:49:18 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2013-Feb-22 01:49:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 01:49:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 01:49:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:49:18 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 01:49:18 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Feb-22 01:49:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 01:49:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:49:18 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:18 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:49:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 01:49:18 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Feb-22 01:49:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 01:49:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 01:49:18 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 01:49:18 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 01:49:18 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Feb-22 01:49:18 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 01:49:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 01:49:19 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Feb-22 01:49:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 01:49:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 01:49:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 01:49:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:49:19 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 01:49:19 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2013-Feb-22 01:49:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:19 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 01:49:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 01:49:19 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2013-Feb-22 01:49:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 01:49:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:49:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 01:49:19 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2013-Feb-22 01:49:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:19 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20130222.a2048.0000.fits' is empty! 2013-Feb-22 01:49:19 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Feb-22 01:49:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Feb-22 01:49:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Feb-22 01:49:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 01:49:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 01:49:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:49:19 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Feb-22 01:49:19 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:49:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:49:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:49:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:49:19 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Feb-22 01:49:19 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Feb-22 01:49:20 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 01:49:20 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2013-Feb-22 01:49:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Feb-22 01:49:20 INFO2 adjust_power: Starting to adjust WAPP power 2013-Feb-22 01:49:20 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 01:49:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 01:49:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:49:20 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 01:49:20 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Feb-22 01:49:20 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 01:49:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:49:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:49:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:22 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:49:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 01:49:22 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Feb-22 01:49:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 01:49:22 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 01:49:22 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2013-Feb-22 01:49:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 01:49:23 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 01:49:23 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 01:49:23 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 01:49:23 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 01:49:23 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 01:49:23 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2013-Feb-22 01:49:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 01:49:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 01:49:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 5 3 dB 2013-Feb-22 01:49:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 8 6 dB 2013-Feb-22 01:49:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Feb-22 01:49:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 01:49:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 01:49:23 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2013-Feb-22 01:49:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.970 0.916 ALFA beam 1: 0.935 0.880 2013-Feb-22 01:49:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.066 1.073 ALFA beam 3: 0.969 1.027 2013-Feb-22 01:49:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.949 0.935 ALFA beam 5: 1.104 1.087 2013-Feb-22 01:49:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.969 0.910 ALFA beam 7: 1.075 1.082 2013-Feb-22 01:49:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 01:49:23 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2013-Feb-22 01:49:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 01:49:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:49:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 01:49:23 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2013-Feb-22 01:49:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 01:49:24 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 01:49:24 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2013-Feb-22 01:49:24 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Feb-22 01:49:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:49:24 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 01:49:24 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2013-Feb-22 01:49:24 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Feb-22 01:49:24 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 01:49:24 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 01:49:24 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 01:49:24 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14531 J 2013-Feb-22 01:49:24 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 01:49:24 LOG2 antvel: Parameters to Doppler: Topocentric 20963 2013 53 0.0 2013-Feb-22 01:49:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 01:49:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 01:49:24 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 01:49:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 01:49:24 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 01:49:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 01:49:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:49:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Feb-22 01:49:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 01:49:24 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2013-Feb-22 01:49:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 01:49:24 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.526250 2013.1453140606382 18.999933 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 19.833333333333336 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 1 11.406403512067865 19.777778901984391 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 2 11.405880829718011 19.874198665560829 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 3 11.399575494129321 19.932200075812325 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 4 11.393521434920713 19.887454504606954 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 5 11.394180672592926 19.788049911748512 2013-Feb-22 01:49:24 LOG4 log_alfabeam: ALFABEAM 6 11.400749562854442 19.736436053175392 2013-Feb-22 01:49:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300018 2013-Feb-22 01:49:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 01:49:25 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2013-Feb-22 01:49:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 01:49:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 01:49:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:49:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 01:49:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20966.00 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 01:49:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 01:49:32 LOG4 exec_msg: From WAPPWATCH1: log_message ERROR {WAPP1-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Feb-22 01:49:32 ERROR WAPP1-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Feb-22 01:49:32 LOG4 exec_msg: From WAPPWATCH1: wapp_failure 1 2013-Feb-22 01:49:32 LOG5 wapp_failure: Calling 'wapp_failure 1' 2013-Feb-22 01:49:32 ERROR wapp_failure: ERROR WAPP-1 has failed! 2013-Feb-22 01:49:32 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 1 crash' 2013-Feb-22 01:49:32 START begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:32 LOG5 begin_task: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2013-Feb-22 01:49:32 NOTE handle_wapp_failure: Will abort task 'running command file '130222.cmd'' since the WAPP failure preference is set to 'abort'! 2013-Feb-22 01:49:32 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2013-Feb-22 01:49:32 LOG1 task_failed: Task 'handling WAPP failure' failed! 2013-Feb-22 01:49:32 LOG5 task_failed: Level: (5) ID = <10033> Status = 0 0 0 0 ok 2013-Feb-22 01:49:32 WARNING abort_task: WARNING abort requested! 2013-Feb-22 01:49:32 WARNING abort_task: WARNING Aborting handling WAPP failure 2013-Feb-22 01:49:32 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2013-Feb-22 01:49:32 ALERT handle_wapp_failure: Restarting WAPP-1! 2013-Feb-22 01:49:32 NOTE handle_wapp_failure: Stand by for automatic WAPP-1 reconfiguration in 6 seconds! 2013-Feb-22 01:49:32 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2013-Feb-22 01:49:32 LOG5 end_task: Level: (5) ID = <10033> Status = 1 0 0 1 failed 2013-Feb-22 01:49:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'FAILED' 2013-Feb-22 01:49:32 LOG5 end_task: Level: (4) ID = <10032> Status = 1 0 0 1 failed 2013-Feb-22 01:49:32 LOG4 stop_backends: Calling 'stop_backends' 2013-Feb-22 01:49:32 START begin_task: Starting task 'stopping the WAPPs' 2013-Feb-22 01:49:33 LOG5 begin_task: Level: (4) ID = <10034> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2013-Feb-22 01:49:33 INFO1 stop_wapp: Stopping the WAPPs 2013-Feb-22 01:49:33 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2013-Feb-22 01:49:33 ERROR send_to_one_wapp: ERROR while sending 'ABORT' to WAPPCON! 2013-Feb-22 01:49:33 ERROR send_to_one_wapp: ERROR message: unable to send message to WAPPCON, ABORT 2013-Feb-22 01:49:33 LOG1 task_failed: Task 'stopping the WAPPs' failed! 2013-Feb-22 01:49:33 LOG5 task_failed: Level: (4) ID = <10034> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2013-Feb-22 01:49:33 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2013-Feb-22 01:49:33 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2013-Feb-22 01:49:33 START begin_task: Starting task 'waiting on stopping WAPPs' 2013-Feb-22 01:49:33 LOG5 begin_task: Level: (5) ID = <10035> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 LOG3 exec_msg: Closing socket 2013-Feb-22 01:49:33 LOG4 exec_msg: From WAPPWATCH3: log_message ERROR {WAPP3-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Feb-22 01:49:33 ERROR WAPP3-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Feb-22 01:49:33 LOG4 exec_msg: From WAPPWATCH3: wapp_failure 3 2013-Feb-22 01:49:33 LOG5 wapp_failure: Calling 'wapp_failure 3' 2013-Feb-22 01:49:33 ERROR wapp_failure: ERROR WAPP-3 has failed! 2013-Feb-22 01:49:33 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 crash' 2013-Feb-22 01:49:33 START begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:33 LOG5 begin_task: Level: (6) ID = <10036> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 NOTE handle_wapp_failure: Will abort task 'running command file '130222.cmd'' since the WAPP failure preference is set to 'abort'! 2013-Feb-22 01:49:33 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2013-Feb-22 01:49:33 LOG1 task_failed: Task 'handling WAPP failure' failed! 2013-Feb-22 01:49:33 LOG5 task_failed: Level: (6) ID = <10036> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 WARNING abort_task: WARNING abort requested! 2013-Feb-22 01:49:33 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2013-Feb-22 01:49:33 ALERT handle_wapp_failure: Restarting WAPP-3! 2013-Feb-22 01:49:33 NOTE handle_wapp_failure: Stand by for automatic WAPP-3 reconfiguration in 6 seconds! 2013-Feb-22 01:49:33 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2013-Feb-22 01:49:33 LOG5 end_task: Level: (6) ID = <10036> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2013-Feb-22 01:49:33 LOG5 end_task: Level: (5) ID = <10035> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2013-Feb-22 01:49:33 LOG5 end_task: Level: (4) ID = <10034> Status = 1 0 0 1 failed 2013-Feb-22 01:49:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'FAILED' 2013-Feb-22 01:49:34 LOG5 end_task: Level: (3) ID = <10031> Status = 1 0 0 1 failed 2013-Feb-22 01:49:34 INFO2 smartfreq: Switching off CAL 2013-Feb-22 01:49:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 01:49:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 01:49:34 INFO3 restore_frequencies: Restoring original frequencies 2013-Feb-22 01:49:34 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 01:49:34 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14531 J 2013-Feb-22 01:49:34 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 01:49:34 LOG2 antvel: Parameters to Doppler: Topocentric 20972 2013 53 0.0 2013-Feb-22 01:49:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 01:49:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Feb-22 01:49:34 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Feb-22 01:49:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 01:49:34 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 01:49:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 01:49:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:49:34 STOP finish_task: Finishing task 'smart frequency switching' 2013-Feb-22 01:49:34 LOG5 finish_task: Level: (2) ID = <10021> Status = 1 0 0 1 failed 2013-Feb-22 01:49:34 ERROR finish_task: ERROR failed pattern: smart frequency switching 2013-Feb-22 01:49:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 01:49:34 END end_task: Finishing task 'smart frequency switching' with status 'FAILED' 2013-Feb-22 01:49:34 LOG5 end_task: Level: (2) ID = <10021> Status = 1 0 0 1 failed 2013-Feb-22 01:49:34 ALERT run_command_file: Stopping command file processing at line 20! 2013-Feb-22 01:49:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 01:49:34 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 01:49:34 LOG5 finish_task: Level: (1) ID = <10002> Status = 1 0 0 1 failed 2013-Feb-22 01:49:34 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 01:49:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 01:49:34 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 01:49:34 LOG5 end_task: Level: (1) ID = <10002> Status = 1 0 0 1 failed 2013-Feb-22 01:49:34 LOG4 WAPP=2+3-wappcon: Received command 'ABORT' 2013-Feb-22 01:49:34 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 10442 is no longer running! 2013-Feb-22 01:49:34 ERROR WAPP=3-check_pid: ERROR WAPP process with process-ID 21100 is no longer running! 2013-Feb-22 01:49:34 ERROR WAPP=2-check_pid: ERROR WAPP process with process-ID 24140 is no longer running! 2013-Feb-22 01:49:34 LOG3 exec_msg: Closing socket 2013-Feb-22 01:49:34 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:49:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 01:49:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:49:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:49:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:49:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:49:35 ALERT WAPP=1-wappcon: WAPP1 restarting 2013-Feb-22 01:49:36 ALERT WAPP=3-wappcon: WAPP3 restarting 2013-Feb-22 01:49:36 LOG4 exec_msg: From WAPPWATCH2: log_message ERROR {WAPP2-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Feb-22 01:49:36 ERROR WAPP2-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Feb-22 01:49:37 LOG4 exec_msg: From WAPPWATCH2: wapp_failure 2 2013-Feb-22 01:49:37 LOG5 wapp_failure: Calling 'wapp_failure 2' 2013-Feb-22 01:49:37 ERROR wapp_failure: ERROR WAPP-2 has failed! 2013-Feb-22 01:49:37 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 2 crash' 2013-Feb-22 01:49:37 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:37 LOG5 begin_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2013-Feb-22 01:49:37 ALERT handle_wapp_failure: Restarting WAPP-2! 2013-Feb-22 01:49:37 NOTE handle_wapp_failure: Stand by for automatic WAPP-2 reconfiguration in 6 seconds! 2013-Feb-22 01:49:37 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Feb-22 01:49:37 LOG5 end_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2013-Feb-22 01:49:37 LOG4 exec_msg: From WAPPWATCH4: log_message ERROR {WAPP4-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Feb-22 01:49:37 ERROR WAPP4-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Feb-22 01:49:37 LOG4 exec_msg: From WAPPWATCH4: wapp_failure 4 2013-Feb-22 01:49:37 LOG5 wapp_failure: Calling 'wapp_failure 4' 2013-Feb-22 01:49:37 ERROR wapp_failure: ERROR WAPP-4 has failed! 2013-Feb-22 01:49:37 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 crash' 2013-Feb-22 01:49:37 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:37 LOG5 begin_task: Level: (1) ID = <10038> Status = 0 0 0 0 ok 2013-Feb-22 01:49:37 ALERT handle_wapp_failure: Restarting WAPP-4! 2013-Feb-22 01:49:37 NOTE handle_wapp_failure: Stand by for automatic WAPP-4 reconfiguration in 6 seconds! 2013-Feb-22 01:49:37 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Feb-22 01:49:37 LOG5 end_task: Level: (1) ID = <10038> Status = 0 0 0 0 ok 2013-Feb-22 01:49:37 LOG3 exec_msg: Closing socket 2013-Feb-22 01:49:37 LOG3 exec_msg: Closing socket 2013-Feb-22 01:49:38 LOG5 wapp_restart: Calling 'wapp_restart 1' 2013-Feb-22 01:49:38 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:38 LOG5 begin_task: Level: (1) ID = <10039> Status = 0 0 0 0 ok 2013-Feb-22 01:49:38 ALERT wapp_restart: Sending configuration information to WAPP-1 2013-Feb-22 01:49:38 LOG3 sock_errsend: To WAPPCON: TIMEOUT 5 2013-Feb-22 01:49:38 LOG3 sock_errsend: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:39 INFO1 wapp_restart: Configuration information sent to WAPP-1 2013-Feb-22 01:49:39 NOTE wapp_restart: WAPP-1 should be ready now 2013-Feb-22 01:49:39 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Feb-22 01:49:39 LOG5 end_task: Level: (1) ID = <10039> Status = 0 0 0 0 ok 2013-Feb-22 01:49:39 LOG4 WAPP=1-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 01:49:39 LOG4 WAPP=1-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:49:39 ALERT WAPP=2-wappcon: WAPP2 restarting 2013-Feb-22 01:49:39 LOG5 wapp_restart: Calling 'wapp_restart 3' 2013-Feb-22 01:49:39 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:39 LOG5 begin_task: Level: (1) ID = <10040> Status = 0 0 0 0 ok 2013-Feb-22 01:49:39 ALERT wapp_restart: Sending configuration information to WAPP-3 2013-Feb-22 01:49:39 LOG3 sock_errsend: To WAPPCON3: TIMEOUT 5 2013-Feb-22 01:49:39 LOG3 sock_errsend: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:40 INFO1 wapp_restart: Configuration information sent to WAPP-3 2013-Feb-22 01:49:40 NOTE wapp_restart: WAPP-3 should be ready now 2013-Feb-22 01:49:40 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Feb-22 01:49:40 LOG5 end_task: Level: (1) ID = <10040> Status = 0 0 0 0 ok 2013-Feb-22 01:49:40 ALERT WAPP=4-wappcon: WAPP4 restarting 2013-Feb-22 01:49:40 LOG4 WAPP=3-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 01:49:40 LOG4 WAPP=3-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:49:43 LOG5 wapp_restart: Calling 'wapp_restart 2' 2013-Feb-22 01:49:43 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:43 LOG5 begin_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2013-Feb-22 01:49:43 ALERT wapp_restart: Sending configuration information to WAPP-2 2013-Feb-22 01:49:43 LOG3 sock_errsend: To WAPPCON2: TIMEOUT 5 2013-Feb-22 01:49:43 LOG3 sock_errsend: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:43 INFO1 wapp_restart: Configuration information sent to WAPP-2 2013-Feb-22 01:49:43 NOTE wapp_restart: WAPP-2 should be ready now 2013-Feb-22 01:49:43 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Feb-22 01:49:43 LOG5 end_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2013-Feb-22 01:49:43 LOG5 wapp_restart: Calling 'wapp_restart 4' 2013-Feb-22 01:49:43 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Feb-22 01:49:43 LOG5 begin_task: Level: (1) ID = <10042> Status = 0 0 0 0 ok 2013-Feb-22 01:49:43 ALERT wapp_restart: Sending configuration information to WAPP-4 2013-Feb-22 01:49:43 LOG3 sock_errsend: To WAPPCON4: TIMEOUT 5 2013-Feb-22 01:49:43 LOG3 sock_errsend: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:49:43 INFO1 wapp_restart: Configuration information sent to WAPP-4 2013-Feb-22 01:49:43 NOTE wapp_restart: WAPP-4 should be ready now 2013-Feb-22 01:49:43 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Feb-22 01:49:43 LOG5 end_task: Level: (1) ID = <10042> Status = 0 0 0 0 ok 2013-Feb-22 01:49:43 LOG4 WAPP=2+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 01:49:43 LOG4 WAPP=2+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:50:20 COMMAND CIMA-send_to_exec: Sending command to abort observation 2013-Feb-22 01:50:20 LOG4 exec_msg: From OBSERVER: abort_task abort 2013-Feb-22 01:50:20 WARNING abort_task: WARNING abort requested! 2013-Feb-22 01:50:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 22 1 56 2013-Feb-22 01:50:36 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 22 1 56' 2013-Feb-22 01:50:36 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 01:50:36 LOG5 begin_task: Level: (1) ID = <10043> Status = 0 0 0 0 ok 2013-Feb-22 01:50:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 01:50:36 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 22 2013-Feb-22 01:50:36 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock_cima33.conf' 2013-Feb-22 01:50:36 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 01:50:36 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Feb-22 01:50:36 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2013-Feb-22 01:50:36 LOG2 CIMA-antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14532 J 2013-Feb-22 01:50:36 LOG2 CIMA-antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 01:50:36 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 21036 2013 53 0.0 2013-Feb-22 01:50:36 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Feb-22 01:50:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Feb-22 01:50:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2013-Feb-22 01:50:38 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2013-Feb-22 01:50:39 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2013-Feb-22 01:50:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 01:50:40 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Feb-22 01:50:40 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2013-Feb-22 01:50:41 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Feb-22 01:50:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Feb-22 01:50:41 LOG1 config_iflo: Receiver ALFA already selected 2013-Feb-22 01:50:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 01:50:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:50:41 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 01:50:41 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Feb-22 01:50:41 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 01:50:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 01:50:41 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Feb-22 01:50:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 01:50:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:50:41 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Feb-22 01:50:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Feb-22 01:50:41 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Feb-22 01:50:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Feb-22 01:50:41 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Feb-22 01:50:41 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Feb-22 01:50:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Feb-22 01:50:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:50:42 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Feb-22 01:50:42 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:50:42 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Feb-22 01:50:42 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Feb-22 01:50:42 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Feb-22 01:50:42 LOG5 finish_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 DONE finish_task: DONE finished configuration: IF/LO path 2013-Feb-22 01:50:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:50:42 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Feb-22 01:50:42 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Feb-22 01:50:42 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Feb-22 01:50:42 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Feb-22 01:50:42 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 01:50:42 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 01:50:42 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 01:50:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 01:50:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:50:42 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 01:50:42 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 01:50:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:43 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:50:43 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 01:50:43 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2013-Feb-22 01:50:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 01:50:43 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 01:50:43 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2013-Feb-22 01:50:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 01:50:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 01:50:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:50:43 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2013-Feb-22 01:50:43 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:50:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:50:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:50:43 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:50:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 01:50:43 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 01:50:44 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 01:50:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:50:44 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Feb-22 01:50:44 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:50:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 01:50:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:50:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 01:50:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:50:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:50:44 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Feb-22 01:50:44 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Feb-22 01:50:44 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Feb-22 01:50:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:50:44 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Feb-22 01:50:44 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2013-Feb-22 01:50:44 LOG5 begin_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2013-Feb-22 01:50:44 INFO1 config_mock: Starting to configure the Mock spectrometer 2013-Feb-22 01:50:44 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 01:50:44 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 01:50:44 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 01:50:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 01:50:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:50:44 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 01:50:44 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2013-Feb-22 01:50:44 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Feb-22 01:50:44 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 01:50:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:45 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:50:45 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 01:50:45 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2013-Feb-22 01:50:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 01:50:45 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 01:50:45 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2013-Feb-22 01:50:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 01:50:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 01:50:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:50:45 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2013-Feb-22 01:50:45 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:50:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:50:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:50:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:50:45 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2013-Feb-22 01:50:45 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 01:50:45 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 01:50:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 01:50:45 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2013-Feb-22 01:50:45 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 01:50:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 01:50:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 01:50:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 01:50:45 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2013-Feb-22 01:50:45 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2013-Feb-22 01:50:45 LOG3 socket_wait: To MOCK: NOP 2013-Feb-22 01:50:45 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2013-Feb-22 01:50:45 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Feb-22 01:50:46 ALERT got_mock_message: Mock spectrometer restarting 2013-Feb-22 01:50:46 LOG4 from_mock: From MOCK: nop ok 2013-Feb-22 01:50:46 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2013-Feb-22 01:50:46 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Feb-22 01:50:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:0 k:a rf:1 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:1 k:b rf:5 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:2 k:c rf:2 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:3 k:d rf:6 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:4 k:e rf:3 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:5 k:f rf:7 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: PhilDbg:config_mock b:6 k:g rf:4 flip:-1 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2013-Feb-22 01:50:46 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2013-Feb-22 01:50:46 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2013-Feb-22 01:50:46 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2013-Feb-22 01:50:46 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2013-Feb-22 01:50:46 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2013-Feb-22 01:50:46 LOG4 from_mock: From MOCK: confok 2013-Feb-22 01:50:47 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2013-Feb-22 01:50:47 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2013-Feb-22 01:50:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2013-Feb-22 01:50:47 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2013-Feb-22 01:50:47 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2013-Feb-22 01:50:47 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2013-Feb-22 01:50:47 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Feb-22 01:50:47 LOG4 from_mock: From MOCK: confok 2013-Feb-22 01:50:47 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2013-Feb-22 01:50:47 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Feb-22 01:50:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2013-Feb-22 01:50:47 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2013-Feb-22 01:50:47 LOG5 finish_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2013-Feb-22 01:50:47 DONE finish_task: DONE finished configuring: the Mock spectrometer 2013-Feb-22 01:50:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 01:50:47 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2013-Feb-22 01:50:47 LOG5 end_task: Level: (2) ID = <10052> Status = 0 0 0 0 ok 2013-Feb-22 01:50:47 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Feb-22 01:50:47 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2013-Feb-22 01:50:47 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2013-Feb-22 01:50:47 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Feb-22 01:50:47 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES1367_p3_002) < 112312 THEN' 2013-Feb-22 01:50:48 LOG3 is_if_valid: Current source data: up 186.7 3.4 UP - - 84 2.5 2013-Feb-22 01:50:48 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p3_002) < 112312 2013-Feb-22 01:50:48 INFO5 is_if_valid: Condition parsed as: 11.591034666666665 < 11.386666666666667 2013-Feb-22 01:50:48 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES1367_p3_002) < 112312 THEN' 2013-Feb-22 01:50:48 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=218.18 alfaangle=-15.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_002 ra=113400.00 dec=214830.00' 2013-Feb-22 01:50:49 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=218.18 alfaangle=-15.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_002 ra=113400.00 dec=214830.00' in non-true conditional branch 2013-Feb-22 01:50:49 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2013-Feb-22 01:50:49 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES1367_p3_004) < 114612 THEN' 2013-Feb-22 01:50:50 LOG3 is_if_valid: Current source data: up 186.7 3.4 UP - - 84 2.5 2013-Feb-22 01:50:50 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p3_004) < 114612 2013-Feb-22 01:50:50 INFO5 is_if_valid: Condition parsed as: 11.591034666666665 < 11.770000000000001 2013-Feb-22 01:50:50 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=141.42 alfaangle=54.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_004 ra=113400.00 dec=214530.00' 2013-Feb-22 01:50:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 01:50:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 01:50:50 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 141.42 54.4 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p3_004 113400.00 214530.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 01:50:50 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 01:50:50 LOG5 begin_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2013-Feb-22 01:50:50 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2013-Feb-22 01:50:51 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 01:50:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p3_004} 2013-Feb-22 01:50:51 INFO3 fixed_driftmap: Sending telescope to Az = 141.42 and ZA = 4.28 2013-Feb-22 01:50:51 LOG3 track_source: Calling 'track_source AGES1367_p3_004 141.42 4.2849284473 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 01:50:51 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 01:50:51 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2013-Feb-22 01:50:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_004} INFO {Slewing to source 'AGES1367_p3_004' ...} 2013-Feb-22 01:50:51 INFO1 track_source: Starting to track AGES1367_p3_004 2013-Feb-22 01:50:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_004" 2013-Feb-22 01:50:51 LOG3 vw_send: To DATATAKING: set ra 141.42 2013-Feb-22 01:50:51 LOG3 vw_send: To DATATAKING: set dec 4.2849284473 2013-Feb-22 01:50:51 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 01:50:51 LOG3 vw_send: To DATATAKING: pnt tr 141.42 4.2849284473 -CF 2013-Feb-22 01:50:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 01:50:51 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 01:50:51 LOG5 finish_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2013-Feb-22 01:50:51 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 01:50:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:50:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 01:50:51 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2013-Feb-22 01:50:51 START begin_task: Starting task 'rotate ALFA to +54.4 degrees' 2013-Feb-22 01:50:51 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Feb-22 01:50:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +54.4 degrees ...} 2013-Feb-22 01:50:51 INFO2 rotate_alfa: ALFA commanded to +54.4 degrees 2013-Feb-22 01:50:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION 54.4 REPLY 2013-Feb-22 01:50:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 01:50:51 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 01:50:51 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2013-Feb-22 01:50:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_004" 2013-Feb-22 01:50:51 LOG4 got_cormsg: From DATATAKING: set ra 141.42 2013-Feb-22 01:50:51 LOG4 got_cormsg: From DATATAKING: vw% 141.42 2013-Feb-22 01:50:51 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: set dec 4.2849284473 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: 4.2849284473 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: pnt tr 141.42 4.2849284473 -CF 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 01:50:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 01:51:12 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 01:51:12 INFO3 alfa_motor: ALFA rotator in-position +54.40 degrees 2013-Feb-22 01:51:12 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 01:51:12 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2013-Feb-22 01:51:12 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 01:51:13 STOP finish_task: Finishing task 'rotate ALFA to +54.4 degrees' 2013-Feb-22 01:51:13 LOG5 finish_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Feb-22 01:51:13 INFO2 finish_task: DONE finished configuration: rotating ALFA to +54.4 degrees 2013-Feb-22 01:51:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:51:13 STOP end_task: Finishing task 'rotate ALFA to +54.4 degrees' with status 'OK' 2013-Feb-22 01:51:13 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2013-Feb-22 01:51:13 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 01:51:13 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Feb-22 01:51:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 01:51:13 LOG3 waittrk: Start waittrk 5 2013-Feb-22 01:51:13 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 01:51:13 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Feb-22 01:51:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 01:51:18 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Feb-22 01:51:18 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 01:51:18 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2013-Feb-22 01:51:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 01:51:46 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2013-Feb-22 01:51:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 01:51:46 INFO2 waittrk: Now tracking AGES1367_p3_004 2013-Feb-22 01:51:46 LOG4 waittrk: Current telescope position: Az = 141.17 ZA = 4.29 2013-Feb-22 01:51:46 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 01:51:46 LOG5 finish_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 01:51:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 01:51:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 01:51:47 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 01:51:47 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 01:51:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 01:51:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:51:47 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 01:51:47 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 01:51:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 01:51:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:51:47 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 01:51:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 01:51:47 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 01:51:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 01:51:47 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 01:51:47 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 01:51:47 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 01:51:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 01:51:47 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 01:51:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 01:51:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 01:51:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:51:47 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 01:51:47 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2013-Feb-22 01:51:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 01:51:47 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 01:51:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 01:51:47 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2013-Feb-22 01:51:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 01:51:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 01:51:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 01:51:48 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2013-Feb-22 01:51:48 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 01:51:48 INFO2 astwait: Waiting for 671 seconds from 05:51:48 to 06:02:59 UTC ... 2013-Feb-22 01:51:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 671 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 01:51:48 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 01:51:48 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2013-Feb-22 02:02:59 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 02:02:59 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2013-Feb-22 02:02:59 INFO3 astwait: Finished waiting 2013-Feb-22 02:02:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:02:59 LOG5 dopset_later: Calling 'dopset_later 61.153106687736354' 2013-Feb-22 02:02:59 INFO3 dopset_later: Setting Doppler correction for 02:03:59 (61.2 seconds from now) 2013-Feb-22 02:02:59 LOG5 antvel: Calling 'antvel 141.420000 4.284928 F Heliocentric 61.153106687736354' 2013-Feb-22 02:02:59 LOG2 antvel: Transforming current Az = 141.42 ZA = 4.28 to apparent RA = 11:34:43.1 Dec = +21:40:52.2 2013-Feb-22 02:02:59 LOG2 antvel: Parameters to Doppler: Heliocentric 21839 2013 53 0.0 2013-Feb-22 02:02:59 INFO5 antvel: Computed antenna velocity: -6.10875 km/s 2013-Feb-22 02:02:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-6.1087469601000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 02:02:59 INFO4 dopset_gen: New sky frequencies: 1381.271574 1381.271574 1381.271574 1381.271574 1381.271574 1381.271574 1381.271574 1381.271574 1381.271574 2013-Feb-22 02:02:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.271574 sky0=1381.271574 sky1=1381.271574 sky2=1381.271574 sky3=1381.271574 sky4=1381.271574 sky5=1381.271574 sky6=1381.271574 sky7=1381.271574 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:02:59 LOG2 dopset_gen: Result from 'sky2syn': 1631.271574 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631271574.0} 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:02:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 02:02:59 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 02:02:59 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.7 Dec = +21:45:13.9 2013-Feb-22 02:02:59 LOG3 track_source: Calling 'track_source AGES1367_p3_004 113303.7 214513.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:02:59 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:02:59 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Feb-22 02:02:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_004} INFO {Slewing to source 'AGES1367_p3_004' ...} 2013-Feb-22 02:02:59 INFO1 track_source: Starting to track AGES1367_p3_004 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_004" 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: set ra 113303.7 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: set dec 214513.9 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: pnt tr 113303.7 214513.9 -CJ 2013-Feb-22 02:02:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:02:59 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:02:59 LOG5 finish_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Feb-22 02:02:59 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:02:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:03:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:03:00 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Feb-22 02:03:00 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:03:00 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2013-Feb-22 02:03:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:03:00 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:03:00 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:03:00 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631271574.0} 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_004" 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: set ra 113303.7 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% 113303.7 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: set dec 214513.9 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: 214513.9 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.7 214513.9 -CJ 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:03:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:03:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:03:05 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2013-Feb-22 02:03:05 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:03:05 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2013-Feb-22 02:03:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:03:06 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2013-Feb-22 02:03:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:03:06 INFO2 waittrk: Now tracking AGES1367_p3_004 2013-Feb-22 02:03:06 LOG4 waittrk: Current telescope position: Az = 140.98 ZA = 4.30 2013-Feb-22 02:03:06 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:03:06 LOG5 finish_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2013-Feb-22 02:03:06 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:03:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:03:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:03:06 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2013-Feb-22 02:03:06 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 02:03:06 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2013-Feb-22 02:03:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 02:03:06 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 02:03:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 02:03:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 02:03:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:03:06 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 02:03:07 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2013-Feb-22 02:03:07 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 02:03:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:03:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:09 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:03:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 02:03:09 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2013-Feb-22 02:03:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 02:03:09 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:03:09 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Feb-22 02:03:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:03:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:03:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:03:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:03:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:03:10 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 02:03:10 LOG5 begin_task: Level: (5) ID = <10079> Status = 0 0 0 0 ok 2013-Feb-22 02:03:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 02:03:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 4 7 dB 2013-Feb-22 02:03:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 5 3 dB 2013-Feb-22 02:03:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 8 6 dB 2013-Feb-22 02:03:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 5 dB 2013-Feb-22 02:03:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 02:03:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 02:03:10 LOG5 end_task: Level: (5) ID = <10079> Status = 0 0 0 0 ok 2013-Feb-22 02:03:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.938 1.117 ALFA beam 1: 0.924 1.118 2013-Feb-22 02:03:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.063 1.046 ALFA beam 3: 0.961 0.995 2013-Feb-22 02:03:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.896 0.879 ALFA beam 5: 1.079 1.089 2013-Feb-22 02:03:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.937 0.937 ALFA beam 7: 1.047 0.886 2013-Feb-22 02:03:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:03:10 LOG5 finish_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Feb-22 02:03:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 02:03:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:03:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:03:10 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2013-Feb-22 02:03:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 02:03:10 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2013-Feb-22 02:03:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:03:10 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 02:03:10 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 02:03:10 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 02:03:10 LOG5 begin_task: Level: (5) ID = <10081> Status = 0 0 0 0 ok 2013-Feb-22 02:03:14 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 02:03:14 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 02:03:14 LOG5 task_failed: Level: (5) ID = <10081> Status = 0 0 0 0 ok 2013-Feb-22 02:03:14 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 02:03:14 LOG5 end_task: Level: (5) ID = <10081> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 02:03:14 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 02:03:14 LOG5 finish_task: Level: (4) ID = <10080> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 02:03:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 02:03:14 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 02:03:14 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 02:03:14 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 02:03:14 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 02:03:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 02:03:14 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 02:03:14 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 02:03:14 LOG5 finish_task: Level: (2) ID = <10060> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 02:03:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:03:14 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 02:03:14 LOG5 end_task: Level: (2) ID = <10060> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 ALERT run_command_file: Stopping command file processing at line 41! 2013-Feb-22 02:03:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 02:03:14 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 02:03:14 LOG5 finish_task: Level: (1) ID = <10043> Status = 0 0 0 1 failed 2013-Feb-22 02:03:14 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 02:03:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:03:14 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 02:03:14 LOG5 end_task: Level: (1) ID = <10043> Status = 0 0 0 1 failed 2013-Feb-22 02:03:41 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 02:03:41 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 44 1 56 2013-Feb-22 02:03:41 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 44 1 56' 2013-Feb-22 02:03:41 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 02:03:42 LOG5 begin_task: Level: (1) ID = <10082> Status = 0 0 0 0 ok 2013-Feb-22 02:03:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 02:03:42 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 44 2013-Feb-22 02:03:42 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2013-Feb-22 02:03:42 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2013-Feb-22 02:03:42 LOG1 task_failed: Task 'running command file '130222.cmd'' failed! 2013-Feb-22 02:03:42 LOG5 task_failed: Level: (1) ID = <10082> Status = 0 0 0 0 ok 2013-Feb-22 02:03:42 ALERT run_command_file: Stopping command file processing at line 44! 2013-Feb-22 02:03:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 02:03:42 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 02:03:42 LOG5 finish_task: Level: (1) ID = <10082> Status = 0 0 0 1 failed 2013-Feb-22 02:03:42 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 02:03:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:03:42 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 02:03:42 LOG5 end_task: Level: (1) ID = <10082> Status = 0 0 0 1 failed 2013-Feb-22 02:03:47 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2013-Feb-22 02:03:47 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 59 - 82) 2013-Feb-22 02:03:47 INFO4 CIMA-load_command_file: Loaded command file '130222.cmd' 2013-Feb-22 02:03:49 INFO1 CIMA-run_command_file: Transferring command file '130222.cmd' to executive ... 2013-Feb-22 02:03:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2013-Feb-22 02:03:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2013-Feb-22 02:03:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2013-Feb-22 02:03:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2013-Feb-22 02:03:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES1367_p3_002) < 112312 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=218.18 alfaangle=-15.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_002 ra=113400.00 dec=214830.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGES1367_p3_004) < 114612 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=141.42 alfaangle=54.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_004 ra=113400.00 dec=214530.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES1367_p3_006) < 120912 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=113.46 alfaangle=85.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_006 ra=113400.00 dec=214230.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES1367_p3_008) < 123212 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=105.83 alfaangle=-83.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_008 ra=113400.00 dec=213930.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 63 {LOAD togs_cima33.conf} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 64 {CATALOG togs_ages.cat} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {IF isup(galfasrc) then} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 66 {GOTO galfasrc} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 67 {ELSEIF isup(galfasrc2) then} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 68 {GOTO galfasrc2} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 69 {ELSE} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 70 {TRACKCURPOS} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 71 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 72 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 73 {ALFAANGLE 19} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 74 {WAITTRACK} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 78 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 86 {LOAD ages_mock_cima33.conf} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 87 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 88 {CATALOG AGESFull.cat} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 91 {IF LSTSLEW(NGC5523_p2_019) < 132436 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 92 {FIXEDDRIFT az=232.93 alfaangle=-34.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_019 ra=141000.00 dec=255300.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 95 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 98 {IF LSTSLEW(NGC5523_p2_021) < 133606 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 99 {FIXEDDRIFT az=225.60 alfaangle=-25.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_021 ra=141000.00 dec=255000.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 50 102 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 51 105 {IF LSTSLEW(NGC5523_p2_023) < 134736 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 52 106 {FIXEDDRIFT az=214.86 alfaangle=-13.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_023 ra=141000.00 dec=254700.00} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 53 109 {ENDIF} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 54 112 {IF LSTSLEW(NGC5523_p2_025) < 135906 THEN} 2013-Feb-22 02:03:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 55 113 {FIXEDDRIFT az=199.50 alfaangle=1.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_025 ra=141000.00 dec=254400.00} 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: store_command_file_line 56 116 {ENDIF} 2013-Feb-22 02:03:51 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 1 1 56 2013-Feb-22 02:03:51 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 1 1 56' 2013-Feb-22 02:03:51 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 02:03:51 LOG5 begin_task: Level: (1) ID = <10083> Status = 0 0 0 0 ok 2013-Feb-22 02:03:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 02:03:51 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 1 2013-Feb-22 02:03:51 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2013-Feb-22 02:03:51 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:03:51 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Feb-22 02:03:51 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Feb-22 02:03:51 LOG2 CIMA-antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14534 J 2013-Feb-22 02:03:51 LOG2 CIMA-antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:03:51 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 21831 2013 53 0.0 2013-Feb-22 02:03:51 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Feb-22 02:03:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Feb-22 02:03:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Feb-22 02:03:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:03:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Feb-22 02:03:53 LOG5 begin_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2013-Feb-22 02:03:53 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Feb-22 02:03:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Feb-22 02:03:53 LOG1 config_iflo: Receiver ALFA already selected 2013-Feb-22 02:03:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:03:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:03:53 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:03:53 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Feb-22 02:03:53 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:03:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:03:53 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Feb-22 02:03:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:03:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:03:53 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Feb-22 02:03:53 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Feb-22 02:03:53 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Feb-22 02:03:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Feb-22 02:03:54 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Feb-22 02:03:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Feb-22 02:03:54 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Feb-22 02:03:54 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Feb-22 02:03:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Feb-22 02:03:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:03:54 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Feb-22 02:03:54 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: vw% puts {DONE}; flush stdout 2013-Feb-22 02:03:54 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:03:54 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Feb-22 02:03:54 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2013-Feb-22 02:03:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Feb-22 02:03:54 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Feb-22 02:03:54 LOG5 finish_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2013-Feb-22 02:03:54 DONE finish_task: DONE finished configuration: IF/LO path 2013-Feb-22 02:03:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:03:55 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Feb-22 02:03:55 LOG5 end_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Feb-22 02:03:55 LOG5 begin_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Feb-22 02:03:55 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Feb-22 02:03:55 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 02:03:55 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 02:03:55 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 02:03:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 02:03:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:03:55 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 02:03:55 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:55 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 02:03:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:55 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:03:55 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 02:03:55 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 02:03:55 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 02:03:55 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:03:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:03:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:03:55 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2013-Feb-22 02:03:55 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:03:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:03:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:03:56 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:03:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:03:56 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 02:03:56 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 02:03:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:03:56 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Feb-22 02:03:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Feb-22 02:03:56 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:03:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 02:03:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:03:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 02:03:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:03:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:03:56 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Feb-22 02:03:56 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Feb-22 02:03:56 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Feb-22 02:03:56 LOG5 finish_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2013-Feb-22 02:03:56 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Feb-22 02:03:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:03:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Feb-22 02:03:57 LOG5 end_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2013-Feb-22 02:03:57 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2013-Feb-22 02:03:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Feb-22 02:03:57 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2013-Feb-22 02:03:57 LOG3 is_if_valid: Current source data: down 251.5 31.9 55 - - 213 6.4 2013-Feb-22 02:03:57 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Feb-22 02:03:57 INFO5 is_if_valid: Condition parsed as: 0 2013-Feb-22 02:03:57 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2013-Feb-22 02:03:57 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2013-Feb-22 02:03:57 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2013-Feb-22 02:03:57 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2013-Feb-22 02:03:57 LOG3 is_if_valid: Current source data: up 106.3 5.3 UP - - 62 1.4 2013-Feb-22 02:03:57 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2013-Feb-22 02:03:57 INFO5 is_if_valid: Condition parsed as: 1 2013-Feb-22 02:03:57 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2013-Feb-22 02:03:57 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2013-Feb-22 02:03:57 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2013-Feb-22 02:03:57 LOG5 begin_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2013-Feb-22 02:03:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2013-Feb-22 02:03:57 LOG3 track_source: Calling 'track_source galfasrc2 112400.0 +195000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Feb-22 02:03:57 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:03:57 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2013-Feb-22 02:03:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2013-Feb-22 02:03:57 INFO1 track_source: Starting to track galfasrc2 2013-Feb-22 02:03:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2013-Feb-22 02:03:57 LOG3 vw_send: To DATATAKING: set ra 112400.0 2013-Feb-22 02:03:58 LOG3 vw_send: To DATATAKING: set dec +195000 2013-Feb-22 02:03:58 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:03:58 LOG3 vw_send: To DATATAKING: pnt tr 112400.0 +195000 -CJ 2013-Feb-22 02:03:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Feb-22 02:03:58 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:03:58 LOG5 finish_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2013-Feb-22 02:03:58 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:03:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:03:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:03:58 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2013-Feb-22 02:03:58 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2013-Feb-22 02:03:58 LOG5 finish_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2013-Feb-22 02:03:58 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2013-Feb-22 02:03:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:03:58 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2013-Feb-22 02:03:58 LOG5 end_task: Level: (2) ID = <10092> Status = 0 0 0 0 ok 2013-Feb-22 02:03:58 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2013-Feb-22 02:03:58 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Feb-22 02:03:58 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2013-Feb-22 02:03:58 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Feb-22 02:03:58 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Feb-22 02:03:58 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Feb-22 02:03:58 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2013-Feb-22 02:03:58 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2013-Feb-22 02:03:58 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Feb-22 02:03:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Feb-22 02:03:58 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2013-Feb-22 02:03:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Feb-22 02:03:58 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Feb-22 02:03:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Feb-22 02:03:59 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 02:03:59 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 02:03:59 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2013-Feb-22 02:03:59 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: set ra 112400.0 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: 112400.0 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: set dec +195000 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: +195000 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: pnt tr 112400.0 +195000 -CJ 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Feb-22 02:03:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:04:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 02:04:20 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Feb-22 02:04:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 02:04:20 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2013-Feb-22 02:04:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:04:20 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Feb-22 02:04:20 LOG5 finish_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2013-Feb-22 02:04:20 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Feb-22 02:04:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:04:20 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Feb-22 02:04:20 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2013-Feb-22 02:04:20 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2013-Feb-22 02:04:20 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:04:20 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2013-Feb-22 02:04:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:04:20 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:04:20 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:04:20 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Feb-22 02:04:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:04:25 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Feb-22 02:04:25 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:04:25 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2013-Feb-22 02:05:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:05:30 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2013-Feb-22 02:05:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:05:30 INFO2 waittrk: Now tracking galfasrc2 2013-Feb-22 02:05:30 LOG4 waittrk: Current telescope position: Az = 105.27 ZA = 5.61 2013-Feb-22 02:05:30 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:05:30 LOG5 finish_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2013-Feb-22 02:05:30 DONE finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:05:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:05:30 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:05:30 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2013-Feb-22 02:05:30 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Feb-22 02:05:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Feb-22 02:05:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:05:30 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Feb-22 02:05:30 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Feb-22 02:05:30 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2013-Feb-22 02:05:30 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2013-Feb-22 02:05:30 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Feb-22 02:05:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Feb-22 02:05:31 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 02:05:31 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 02:05:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 02:05:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:05:31 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 02:05:31 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 02:05:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:05:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:31 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:05:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 02:05:31 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 02:05:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:05:31 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 02:05:31 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:05:31 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:05:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:05:31 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:05:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 02:05:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:05:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:05:31 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:05:31 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:31 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:05:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:05:31 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2013-Feb-22 02:05:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:05:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:05:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 02:05:32 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2013-Feb-22 02:05:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:05:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:05:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:05:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:05:32 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20130222.a2048.0000.fits' is empty! 2013-Feb-22 02:05:32 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Feb-22 02:05:32 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Feb-22 02:05:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Feb-22 02:05:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:05:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:05:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:05:32 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Feb-22 02:05:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 02:05:32 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:05:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:05:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:05:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:05:32 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Feb-22 02:05:32 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Feb-22 02:05:32 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:05:32 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Feb-22 02:05:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Feb-22 02:05:32 INFO2 adjust_power: Starting to adjust WAPP power 2013-Feb-22 02:05:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 02:05:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 02:05:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:05:32 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 02:05:32 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2013-Feb-22 02:05:32 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 02:05:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:05:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:35 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:05:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 02:05:35 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2013-Feb-22 02:05:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 02:05:35 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:05:35 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2013-Feb-22 02:05:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:05:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:05:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:05:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:05:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:05:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 02:05:35 LOG5 begin_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2013-Feb-22 02:05:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 02:05:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 02:05:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 5 3 dB 2013-Feb-22 02:05:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 8 6 dB 2013-Feb-22 02:05:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Feb-22 02:05:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 02:05:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 02:05:36 LOG5 end_task: Level: (5) ID = <10108> Status = 0 0 0 0 ok 2013-Feb-22 02:05:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.948 0.903 ALFA beam 1: 0.936 0.879 2013-Feb-22 02:05:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.069 1.100 ALFA beam 3: 0.961 1.043 2013-Feb-22 02:05:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.922 0.916 ALFA beam 5: 1.107 1.085 2013-Feb-22 02:05:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.975 0.936 ALFA beam 7: 1.080 1.106 2013-Feb-22 02:05:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:05:36 LOG5 finish_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2013-Feb-22 02:05:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 02:05:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:05:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:05:36 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2013-Feb-22 02:05:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 02:05:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:05:36 LOG5 finish_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Feb-22 02:05:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Feb-22 02:05:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:05:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:05:36 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2013-Feb-22 02:05:36 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Feb-22 02:05:36 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:05:36 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:05:36 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:05:37 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14534 J 2013-Feb-22 02:05:37 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:05:37 LOG2 antvel: Parameters to Doppler: Topocentric 21936 2013 53 0.0 2013-Feb-22 02:05:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:05:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:05:37 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:05:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:05:37 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:05:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:05:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:05:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Feb-22 02:05:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:05:37 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2013-Feb-22 02:05:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:05:37 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.797267 2013.1453448931477 18.999933 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 19.833333333333343 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 1 11.407500745200123 19.825569321511619 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 2 11.403857380997488 19.908622150640621 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 3 11.396355973185996 19.917431244141060 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 4 11.392491621105679 19.840387275910800 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 5 11.396219663463027 19.756688977716419 2013-Feb-22 02:05:37 LOG4 log_alfabeam: ALFABEAM 6 11.403726164528509 19.750680276985307 2013-Feb-22 02:05:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300019 2013-Feb-22 02:05:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:05:38 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2013-Feb-22 02:05:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:05:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:05:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:05:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21939.00 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:05:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:05:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:05:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:05:49 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2013-Feb-22 02:05:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:05:49 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2013-Feb-22 02:05:49 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Feb-22 02:05:49 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:05:49 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:05:49 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:05:49 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:05:49 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:05:49 LOG2 antvel: Parameters to Doppler: Topocentric 21949 2013 53 0.0 2013-Feb-22 02:05:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:05:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:05:49 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:05:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:05:49 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:05:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:05:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:05:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Feb-22 02:05:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:05:50 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2013-Feb-22 02:05:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:05:50 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.800888 2013.1453453050929 18.999933 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333336 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 1 11.407502082216924 19.825826438103853 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 2 11.403844228067403 19.908758609171521 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 3 11.396341275338242 19.917301077663900 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 4 11.392490476882616 19.840135522993251 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 5 11.396232390935934 19.756566860664428 2013-Feb-22 02:05:50 LOG4 log_alfabeam: ALFABEAM 6 11.403739850739216 19.750800355385977 2013-Feb-22 02:05:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300020 2013-Feb-22 02:05:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:05:50 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2013-Feb-22 02:05:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:05:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:05:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:05:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:05:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:05:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21951.00 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:05:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:06:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:06:01 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2013-Feb-22 02:06:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:06:01 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2013-Feb-22 02:06:01 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Feb-22 02:06:01 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:06:01 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:06:01 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:06:01 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:06:01 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:06:01 LOG2 antvel: Parameters to Doppler: Topocentric 21961 2013 53 0.0 2013-Feb-22 02:06:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:06:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:06:01 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:06:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:06:01 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:06:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:06:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Feb-22 02:06:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:06:01 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Feb-22 02:06:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:06:02 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.804231 2013.1453456853499 18.999933 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 19.833333333333343 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 1 11.407503258963075 19.826060158008907 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 2 11.403832253044438 19.908882230628187 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 3 11.396327937589300 19.917182334692232 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 4 11.392489473717827 19.839906682692824 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 5 11.396243975677550 19.756456236531459 2013-Feb-22 02:06:02 LOG4 log_alfabeam: ALFABEAM 6 11.403752272857828 19.750909883866974 2013-Feb-22 02:06:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300021 2013-Feb-22 02:06:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:06:02 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Feb-22 02:06:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:06:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:06:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:02 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:06:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21963.00 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:06:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:06:13 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Feb-22 02:06:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:06:13 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Feb-22 02:06:13 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Feb-22 02:06:13 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:06:13 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:06:13 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:06:13 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:06:13 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:06:13 LOG2 antvel: Parameters to Doppler: Topocentric 21973 2013 53 0.0 2013-Feb-22 02:06:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:06:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:06:13 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:06:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:06:13 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:06:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:06:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Feb-22 02:06:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:06:14 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2013-Feb-22 02:06:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:06:14 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.807573 2013.1453460656069 18.999933 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 19.833333333333336 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 1 11.407504382173393 19.826290380863604 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 2 11.403820439559061 19.909003611538893 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 3 11.396314820489819 19.917064976652117 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 4 11.392488519937508 19.839681269967642 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 5 11.396255401451805 19.756347621687237 2013-Feb-22 02:06:14 LOG4 log_alfabeam: ALFABEAM 6 11.403764491726921 19.751018124442144 2013-Feb-22 02:06:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300022 2013-Feb-22 02:06:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:06:14 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Feb-22 02:06:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:06:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:06:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21975.00 2013-Feb-22 02:06:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:06:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:06:25 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Feb-22 02:06:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:06:25 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2013-Feb-22 02:06:25 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Feb-22 02:06:25 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:06:25 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:06:25 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:06:25 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:06:25 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:06:25 LOG2 antvel: Parameters to Doppler: Topocentric 21985 2013 53 0.0 2013-Feb-22 02:06:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:06:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:06:25 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:06:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:06:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:06:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:06:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Feb-22 02:06:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:06:25 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Feb-22 02:06:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:06:26 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.810916 2013.1453464458641 18.999933 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 1 11.407505454488692 19.826517321925810 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 2 11.403808777353673 19.909122882567271 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 3 11.396301910847789 19.916948911338554 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 4 11.392487613127145 19.839459073720267 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 5 11.396266678321759 19.756240898688201 2013-Feb-22 02:06:26 LOG4 log_alfabeam: ALFABEAM 6 11.403776519556020 19.751125163043060 2013-Feb-22 02:06:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300023 2013-Feb-22 02:06:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:06:26 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2013-Feb-22 02:06:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:06:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:06:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:06:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21987.00 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:06:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:06:37 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2013-Feb-22 02:06:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:06:37 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Feb-22 02:06:37 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Feb-22 02:06:37 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:06:37 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:06:37 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:06:37 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:06:37 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:06:37 LOG2 antvel: Parameters to Doppler: Topocentric 21997 2013 53 0.0 2013-Feb-22 02:06:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:06:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:06:37 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:06:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:06:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:06:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:06:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Feb-22 02:06:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:06:38 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Feb-22 02:06:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:06:38 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.814258 2013.1453468261211 18.999933 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 19.833333333333336 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 1 11.407506477153143 19.826740920642344 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 2 11.403797270297888 19.909240028415631 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 3 11.396289211215143 19.916834186574651 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 4 11.392486752063800 19.839240152919508 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 5 11.396277802681480 19.756136080732411 2013-Feb-22 02:06:38 LOG4 log_alfabeam: ALFABEAM 6 11.403788353890345 19.751230956407575 2013-Feb-22 02:06:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300024 2013-Feb-22 02:06:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:06:38 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Feb-22 02:06:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:06:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:06:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:06:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21999.00 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:06:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:06:49 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Feb-22 02:06:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:06:49 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Feb-22 02:06:49 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Feb-22 02:06:49 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:06:49 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:06:49 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:06:49 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:06:49 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:06:49 LOG2 antvel: Parameters to Doppler: Topocentric 22009 2013 53 0.0 2013-Feb-22 02:06:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:06:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:06:49 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:06:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:06:49 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:06:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:06:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Feb-22 02:06:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:06:49 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2013-Feb-22 02:06:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:06:50 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.817601 2013.1453472063781 18.999933 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333332 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 1 11.407507452586893 19.826961383914380 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 2 11.403785908473683 19.909355173403945 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 3 11.396276708980595 19.916720712430116 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 4 11.392485934539932 19.839024304692114 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 5 11.396288784249181 19.756033056122558 2013-Feb-22 02:06:50 LOG4 log_alfabeam: ALFABEAM 6 11.403800006406605 19.751335588261529 2013-Feb-22 02:06:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300025 2013-Feb-22 02:06:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:06:50 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2013-Feb-22 02:06:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:06:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:06:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:06:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:06:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:06:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22011.00 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:06:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:07:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:07:01 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2013-Feb-22 02:07:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:07:01 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2013-Feb-22 02:07:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Feb-22 02:07:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Feb-22 02:07:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Feb-22 02:07:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:07:01 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2013-Feb-22 02:07:01 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:07:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Feb-22 02:07:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:07:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:07:01 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2013-Feb-22 02:07:01 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Feb-22 02:07:01 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:07:02 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:07:02 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:07:02 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:07:02 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:07:02 LOG2 antvel: Parameters to Doppler: Topocentric 22021 2013 53 0.0 2013-Feb-22 02:07:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:07:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:07:02 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:07:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:07:02 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:07:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:07:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Feb-22 02:07:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:07:02 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2013-Feb-22 02:07:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:07:02 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.820943 2013.1453475866351 18.999933 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333329 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 1 11.407508381939266 19.827178650823818 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 2 11.403774695722882 19.909468301047518 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 3 11.396264406770616 19.916608535875746 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 4 11.392485159423448 19.838811588397146 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 5 11.396299619436096 19.755931839176551 2013-Feb-22 02:07:02 LOG4 log_alfabeam: ALFABEAM 6 11.403811474583470 19.751439016047879 2013-Feb-22 02:07:02 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300026 2013-Feb-22 02:07:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:07:03 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2013-Feb-22 02:07:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:07:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:07:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:07:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22024.00 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:07:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:07:14 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2013-Feb-22 02:07:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:07:14 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2013-Feb-22 02:07:14 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Feb-22 02:07:14 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:07:14 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:07:14 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:07:14 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:07:14 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:07:14 LOG2 antvel: Parameters to Doppler: Topocentric 22034 2013 53 0.0 2013-Feb-22 02:07:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:07:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:07:14 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:07:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:07:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:07:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:07:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Feb-22 02:07:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:07:15 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2013-Feb-22 02:07:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:07:15 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.824564 2013.1453479985803 18.999933 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 1 11.407509339127161 19.827410602963180 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 2 11.403762707956259 19.909588693884938 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 3 11.396251293599551 19.916488396717174 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 4 11.392484365379252 19.838584496980840 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 5 11.396311201054509 19.755824124551413 2013-Feb-22 02:07:15 LOG4 log_alfabeam: ALFABEAM 6 11.403823701055760 19.751549777590483 2013-Feb-22 02:07:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300027 2013-Feb-22 02:07:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:07:15 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2013-Feb-22 02:07:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:07:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:07:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:07:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22036.00 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:07:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:07:26 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2013-Feb-22 02:07:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:07:26 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2013-Feb-22 02:07:26 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Feb-22 02:07:26 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:07:26 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:07:26 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:07:26 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:07:26 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:07:26 LOG2 antvel: Parameters to Doppler: Topocentric 22045 2013 53 0.0 2013-Feb-22 02:07:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:07:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:07:26 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:07:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:07:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:07:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:07:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Feb-22 02:07:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:07:26 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Feb-22 02:07:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:07:27 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.827628 2013.1453483471494 18.999933 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333343 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 1 11.407510110119748 19.827604131428167 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 2 11.403752692471835 19.909688841997390 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 3 11.396240368912638 19.916387858574225 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 4 11.392483729306125 19.838395025896940 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 5 11.396320875268708 19.755734524538433 2013-Feb-22 02:07:27 LOG4 log_alfabeam: ALFABEAM 6 11.403833888873544 19.751642462277626 2013-Feb-22 02:07:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300028 2013-Feb-22 02:07:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:07:27 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2013-Feb-22 02:07:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:07:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:07:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:07:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22048.00 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:07:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:07:38 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2013-Feb-22 02:07:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:07:38 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2013-Feb-22 02:07:38 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Feb-22 02:07:38 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:07:38 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:07:38 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:07:38 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:07:38 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:07:38 LOG2 antvel: Parameters to Doppler: Topocentric 22058 2013 53 0.0 2013-Feb-22 02:07:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:07:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:07:38 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:07:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:07:38 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:07:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:07:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Feb-22 02:07:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:07:39 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2013-Feb-22 02:07:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:07:39 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.831249 2013.1453487590943 18.999933 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333332 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 1 11.407510976932342 19.827829671180066 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 2 11.403741004817839 19.909805209699879 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 3 11.396227655829911 19.916270345964854 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 4 11.392483018353600 19.838174216608309 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 5 11.396332162469884 19.755630415031117 2013-Feb-22 02:07:39 LOG4 log_alfabeam: ALFABEAM 6 11.403845746600808 19.751750789236603 2013-Feb-22 02:07:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300029 2013-Feb-22 02:07:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:07:39 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2013-Feb-22 02:07:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:07:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:07:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:07:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22060.00 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:07:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:07:50 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2013-Feb-22 02:07:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:07:50 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2013-Feb-22 02:07:50 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Feb-22 02:07:50 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:07:50 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:07:50 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:07:50 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:07:50 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:07:50 LOG2 antvel: Parameters to Doppler: Topocentric 22070 2013 53 0.0 2013-Feb-22 02:07:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:07:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:07:50 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:07:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:07:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:07:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:07:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Feb-22 02:07:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:07:50 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2013-Feb-22 02:07:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:07:50 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.834592 2013.1453491393515 18.999933 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333321 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 1 11.407511736079503 19.828034912402959 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 2 11.403730354541546 19.909910780872870 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 3 11.396216104359626 19.916163087383559 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 4 11.392482399751769 19.837973281781711 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 5 11.396342445798465 19.755535966127837 2013-Feb-22 02:07:51 LOG4 log_alfabeam: ALFABEAM 6 11.403856522892477 19.751849658249750 2013-Feb-22 02:07:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300030 2013-Feb-22 02:07:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:07:51 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Feb-22 02:07:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:07:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:07:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:07:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:07:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22072.00 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:07:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:08:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:08:02 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Feb-22 02:08:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:08:02 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2013-Feb-22 02:08:02 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Feb-22 02:08:02 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:08:02 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:08:02 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:08:02 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:08:02 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:08:02 LOG2 antvel: Parameters to Doppler: Topocentric 22082 2013 53 0.0 2013-Feb-22 02:08:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:08:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:08:02 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:08:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:08:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:08:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:08:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Feb-22 02:08:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:08:03 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2013-Feb-22 02:08:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:08:03 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.837934 2013.1453495196085 18.999933 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333336 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 1 11.407512456986428 19.828237292907104 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 2 11.403719839185129 19.910014578740530 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 3 11.396204730167257 19.916057023530023 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 4 11.392481816230097 19.837775149061624 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 5 11.396352596976682 19.755443104737367 2013-Feb-22 02:08:03 LOG4 log_alfabeam: ALFABEAM 6 11.403867135707586 19.751947421281965 2013-Feb-22 02:08:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300031 2013-Feb-22 02:08:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:08:03 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2013-Feb-22 02:08:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:08:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:08:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:08:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22084.00 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:08:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:08:14 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2013-Feb-22 02:08:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:08:14 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2013-Feb-22 02:08:14 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Feb-22 02:08:14 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:08:14 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:08:14 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:08:14 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:08:14 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:08:14 LOG2 antvel: Parameters to Doppler: Topocentric 22093 2013 53 0.0 2013-Feb-22 02:08:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:08:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:08:14 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:08:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:08:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:08:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:08:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Feb-22 02:08:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:08:14 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2013-Feb-22 02:08:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:08:15 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.840998 2013.1453498681774 18.999933 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333343 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 1 11.407513085681391 19.828420430346842 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 2 11.403710312097433 19.910108248807699 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 3 11.396194451398072 19.915960787808572 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 4 11.392481310829359 19.837595856597847 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 5 11.396361792523257 19.755359304722241 2013-Feb-22 02:08:15 LOG4 log_alfabeam: ALFABEAM 6 11.403876728071218 19.752036121639865 2013-Feb-22 02:08:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300032 2013-Feb-22 02:08:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:08:15 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2013-Feb-22 02:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:08:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:08:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:08:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22096.00 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:08:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:08:26 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2013-Feb-22 02:08:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:08:26 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2013-Feb-22 02:08:26 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2013-Feb-22 02:08:26 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2013-Feb-22 02:08:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Feb-22 02:08:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:08:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:08:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:08:26 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2013-Feb-22 02:08:26 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:08:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:08:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:08:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:08:27 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2013-Feb-22 02:08:27 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Feb-22 02:08:27 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Feb-22 02:08:27 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:08:27 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:08:27 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:08:27 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:08:27 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:08:27 LOG2 antvel: Parameters to Doppler: Topocentric 22106 2013 53 0.0 2013-Feb-22 02:08:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:08:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:08:27 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:08:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:08:27 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:08:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:08:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Feb-22 02:08:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:08:27 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2013-Feb-22 02:08:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:08:27 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.844619 2013.1453502801226 18.999933 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 19.833333333333336 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 1 11.407513790304050 19.828633952994320 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 2 11.403699190456464 19.910217150208105 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 3 11.396182483932652 19.915848277330824 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 4 11.392480748724250 19.837386818017727 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 5 11.396372525248744 19.755261878853144 2013-Feb-22 02:08:27 LOG4 log_alfabeam: ALFABEAM 6 11.403887898353316 19.752139818344006 2013-Feb-22 02:08:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300033 2013-Feb-22 02:08:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:08:28 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2013-Feb-22 02:08:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:08:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:08:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:08:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22109.00 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:08:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:08:39 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2013-Feb-22 02:08:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:08:39 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2013-Feb-22 02:08:39 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Feb-22 02:08:39 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:08:39 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:08:39 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:08:39 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:08:39 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:08:39 LOG2 antvel: Parameters to Doppler: Topocentric 22119 2013 53 0.0 2013-Feb-22 02:08:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:08:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:08:39 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:08:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:08:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:08:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:08:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Feb-22 02:08:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:08:40 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2013-Feb-22 02:08:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:08:40 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.848240 2013.1453506920677 18.999933 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333329 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 1 11.407514454868567 19.828844394527334 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 2 11.403688214700905 19.910324153672121 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 3 11.396170706752523 19.915737066347415 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 4 11.392480223322021 19.837180796899123 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 5 11.396383115230206 19.755166151221282 2013-Feb-22 02:08:40 LOG4 log_alfabeam: ALFABEAM 6 11.403898893143037 19.752242313467725 2013-Feb-22 02:08:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300034 2013-Feb-22 02:08:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:08:40 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2013-Feb-22 02:08:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:08:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:08:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:08:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22121.00 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:08:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:08:51 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2013-Feb-22 02:08:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:08:51 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2013-Feb-22 02:08:51 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Feb-22 02:08:51 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:08:51 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:08:51 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:08:51 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:08:51 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:08:51 LOG2 antvel: Parameters to Doppler: Topocentric 22131 2013 53 0.0 2013-Feb-22 02:08:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:08:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:08:51 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:08:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:08:51 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:08:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:08:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Feb-22 02:08:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:08:51 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Feb-22 02:08:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:08:52 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.851582 2013.1453510723247 18.999933 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333343 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 1 11.407515033993013 19.829035947686197 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 2 11.403678211493524 19.910421271118445 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 3 11.396160001830831 19.915635557767573 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 4 11.392479769748499 19.836993268159382 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 5 11.396392765176826 19.755079267843893 2013-Feb-22 02:08:52 LOG4 log_alfabeam: ALFABEAM 6 11.403908888752451 19.752335863600187 2013-Feb-22 02:08:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300035 2013-Feb-22 02:08:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:08:52 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2013-Feb-22 02:08:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:08:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:08:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:08:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:08:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22133.00 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:08:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:09:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:09:03 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2013-Feb-22 02:09:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:09:03 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Feb-22 02:09:03 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Feb-22 02:09:03 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:09:03 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:09:03 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:09:03 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:09:03 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:09:03 LOG2 antvel: Parameters to Doppler: Topocentric 22143 2013 53 0.0 2013-Feb-22 02:09:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:09:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:09:03 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:09:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:09:03 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:09:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:09:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Feb-22 02:09:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:09:04 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Feb-22 02:09:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:09:04 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.854925 2013.145351452582 18.999933 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333343 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 1 11.407515581590021 19.829225045316942 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 2 11.403668324756254 19.910516880142225 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 3 11.396149448332444 19.915535089410980 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 4 11.392479345045485 19.836808143939763 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 5 11.396402301225756 19.754993733714684 2013-Feb-22 02:09:04 LOG4 log_alfabeam: ALFABEAM 6 11.403918744712342 19.752428452605255 2013-Feb-22 02:09:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300036 2013-Feb-22 02:09:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:09:04 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2013-Feb-22 02:09:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:09:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:09:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:09:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22145.00 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:09:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:09:15 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2013-Feb-22 02:09:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:09:15 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Feb-22 02:09:15 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Feb-22 02:09:15 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:09:15 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:09:15 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:09:15 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:09:15 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:09:15 LOG2 antvel: Parameters to Doppler: Topocentric 22154 2013 53 0.0 2013-Feb-22 02:09:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:09:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:09:15 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:09:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:09:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:09:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:09:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Feb-22 02:09:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:09:15 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2013-Feb-22 02:09:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:09:16 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.857989 2013.1453518011508 18.999933 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 19.833333333333325 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 1 11.407516056579182 19.829396198300191 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 2 11.403659366164554 19.910603190517200 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 3 11.396139908482112 19.915443931685285 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 4 11.392478980391056 19.836640587696785 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 5 11.396410940747549 19.754916518008677 2013-Feb-22 02:09:16 LOG4 log_alfabeam: ALFABEAM 6 11.403927655525347 19.752512459340295 2013-Feb-22 02:09:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300037 2013-Feb-22 02:09:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:09:16 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2013-Feb-22 02:09:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:09:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:09:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:09:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22157.00 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:09:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:09:27 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2013-Feb-22 02:09:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:09:27 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2013-Feb-22 02:09:27 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Feb-22 02:09:27 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:09:27 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:09:27 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:09:27 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:09:27 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:09:27 LOG2 antvel: Parameters to Doppler: Topocentric 22167 2013 53 0.0 2013-Feb-22 02:09:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:09:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:09:27 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:09:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:09:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:09:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:09:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Feb-22 02:09:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:09:28 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2013-Feb-22 02:09:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:09:28 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.861610 2013.145352213096 18.999933 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000020 19.833333333333332 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 1 11.407516585884933 19.829595852703179 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 2 11.403648903653337 19.910703602756474 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 3 11.396128794601459 19.915337325735472 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 4 11.392478578716698 19.836445129321497 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 5 11.396421029080109 19.754826685703051 2013-Feb-22 02:09:28 LOG4 log_alfabeam: ALFABEAM 6 11.403938038401442 19.752610700571037 2013-Feb-22 02:09:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300038 2013-Feb-22 02:09:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:09:28 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2013-Feb-22 02:09:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:09:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:09:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:09:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22169.00 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:09:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:09:39 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2013-Feb-22 02:09:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:09:39 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2013-Feb-22 02:09:39 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Feb-22 02:09:39 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:09:39 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:09:39 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:09:39 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:09:39 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:09:39 LOG2 antvel: Parameters to Doppler: Topocentric 22179 2013 53 0.0 2013-Feb-22 02:09:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:09:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:09:39 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:09:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:09:39 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:09:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:09:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Feb-22 02:09:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:09:39 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Feb-22 02:09:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:09:40 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.864952 2013.145352593353 18.999933 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333332 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 1 11.407517044674773 19.829777663717824 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 2 11.403639364880751 19.910794787051660 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 3 11.396118687664208 19.915239996327301 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 4 11.392478235142990 19.836267139520896 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 5 11.396430225281826 19.754745108197191 2013-Feb-22 02:09:40 LOG4 log_alfabeam: ALFABEAM 6 11.403947482285293 19.752700391693441 2013-Feb-22 02:09:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300039 2013-Feb-22 02:09:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:09:40 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Feb-22 02:09:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:09:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:09:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:09:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22181.00 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:09:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:09:51 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Feb-22 02:09:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:09:51 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Feb-22 02:09:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Feb-22 02:09:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Feb-22 02:09:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Feb-22 02:09:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:09:51 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Feb-22 02:09:51 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:09:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Feb-22 02:09:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:09:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:09:51 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2013-Feb-22 02:09:51 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Feb-22 02:09:51 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:09:52 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:09:52 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:09:52 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:09:52 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:09:52 LOG2 antvel: Parameters to Doppler: Topocentric 22191 2013 53 0.0 2013-Feb-22 02:09:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:09:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:09:52 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:09:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:09:52 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:09:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:09:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Feb-22 02:09:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:09:52 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2013-Feb-22 02:09:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:09:52 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.868295 2013.14535297361 18.999933 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 1 11.407517476053888 19.829957216039816 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 2 11.403629934036910 19.910884600905398 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 3 11.396108719088069 19.915143641435691 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 4 11.392477916605282 19.836091360999713 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 5 11.396439316112637 19.754664755756622 2013-Feb-22 02:09:52 LOG4 log_alfabeam: ALFABEAM 6 11.403956798508657 19.752789183732045 2013-Feb-22 02:09:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300040 2013-Feb-22 02:09:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:09:53 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2013-Feb-22 02:09:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:09:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:09:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:09:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:09:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22194.00 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:09:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:10:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:10:04 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2013-Feb-22 02:10:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:10:04 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2013-Feb-22 02:10:04 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Feb-22 02:10:04 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:10:04 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:10:04 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:10:04 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:10:04 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:10:04 LOG2 antvel: Parameters to Doppler: Topocentric 22204 2013 53 0.0 2013-Feb-22 02:10:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:10:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:10:04 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:10:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:10:04 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:10:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:10:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Feb-22 02:10:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:10:05 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Feb-22 02:10:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:10:05 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.871916 2013.1453533855552 18.999933 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 1 11.407517913312091 19.830149143831662 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 2 11.403619841569258 19.910980343924344 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 3 11.396098077503421 19.915040387723831 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 4 11.392477598929627 19.835903467047082 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 5 11.396449043284894 19.754579097442178 2013-Feb-22 02:10:05 LOG4 log_alfabeam: ALFABEAM 6 11.403966745497597 19.752884332287650 2013-Feb-22 02:10:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300041 2013-Feb-22 02:10:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:10:05 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2013-Feb-22 02:10:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:10:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:10:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22206.00 2013-Feb-22 02:10:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:10:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:10:16 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2013-Feb-22 02:10:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:10:16 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Feb-22 02:10:16 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Feb-22 02:10:16 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:10:16 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:10:16 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:10:16 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:10:16 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:10:16 LOG2 antvel: Parameters to Doppler: Topocentric 22216 2013 53 0.0 2013-Feb-22 02:10:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:10:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:10:16 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:10:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:10:16 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:10:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:10:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Feb-22 02:10:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:10:16 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2013-Feb-22 02:10:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:10:17 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.875258 2013.1453537658124 18.999933 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 1 11.407518290167731 19.830323973479626 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 2 11.403610637766180 19.911067322627705 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 3 11.396088396589658 19.914946100948075 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 4 11.392477330071639 19.835732311699065 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 5 11.396457912690838 19.754501278904900 2013-Feb-22 02:10:17 LOG4 log_alfabeam: ALFABEAM 6 11.403975796152405 19.752971217352215 2013-Feb-22 02:10:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300042 2013-Feb-22 02:10:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:10:17 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Feb-22 02:10:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:10:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:10:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:10:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22218.00 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:10:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:10:28 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Feb-22 02:10:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:10:28 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2013-Feb-22 02:10:28 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Feb-22 02:10:28 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:10:28 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:10:28 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:10:28 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:10:28 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:10:28 LOG2 antvel: Parameters to Doppler: Topocentric 22228 2013 53 0.0 2013-Feb-22 02:10:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:10:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:10:28 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:10:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:10:28 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:10:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:10:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Feb-22 02:10:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:10:29 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Feb-22 02:10:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:10:29 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.878601 2013.1453541460694 18.999933 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333336 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 1 11.407518642376624 19.830496682456548 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 2 11.403601535841176 19.911153026331977 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 3 11.396078844948573 19.914852741245838 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 4 11.392477083678505 19.835563232173662 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 5 11.396466682751209 19.754424599604643 2013-Feb-22 02:10:29 LOG4 log_alfabeam: ALFABEAM 6 11.403984727491192 19.753057247991773 2013-Feb-22 02:10:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300043 2013-Feb-22 02:10:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:10:29 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2013-Feb-22 02:10:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:10:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:10:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:10:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22230.00 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:10:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:10:40 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2013-Feb-22 02:10:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:10:40 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Feb-22 02:10:40 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Feb-22 02:10:40 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:10:40 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:10:40 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:10:40 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:10:40 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:10:40 LOG2 antvel: Parameters to Doppler: Topocentric 22239 2013 53 0.0 2013-Feb-22 02:10:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:10:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:10:40 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:10:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:10:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:10:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:10:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Feb-22 02:10:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:10:40 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Feb-22 02:10:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:10:41 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.881664 2013.1453544946382 18.999933 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 19.833333333333336 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 1 11.407518944060612 19.830653054720205 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 2 11.403593286510858 19.911230434629378 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 3 11.396070206961758 19.914768026934254 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 4 11.392476877053809 19.835410145717905 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 5 11.396474630314840 19.754355340796558 2013-Feb-22 02:10:41 LOG4 log_alfabeam: ALFABEAM 6 11.403992805841455 19.753135312051178 2013-Feb-22 02:10:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300044 2013-Feb-22 02:10:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:10:41 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2013-Feb-22 02:10:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:10:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:10:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:10:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22242.00 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:10:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:10:52 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2013-Feb-22 02:10:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:10:52 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2013-Feb-22 02:10:52 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Feb-22 02:10:52 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:10:52 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:10:52 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:10:52 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14535 J 2013-Feb-22 02:10:52 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:10:52 LOG2 antvel: Parameters to Doppler: Topocentric 22252 2013 53 0.0 2013-Feb-22 02:10:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:10:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:10:52 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:10:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:10:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:10:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:10:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Feb-22 02:10:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:10:53 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2013-Feb-22 02:10:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:10:53 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.885285 2013.1453549065834 18.999933 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333321 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 1 11.407519275642155 19.830835651495356 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 2 11.403583643665449 19.911320597830709 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 3 11.396060132551522 19.914668882462458 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 4 11.392476655575059 19.835231385289692 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 5 11.396483919245755 19.754274668004804 2013-Feb-22 02:10:53 LOG4 log_alfabeam: ALFABEAM 6 11.404002229166224 19.753226673895522 2013-Feb-22 02:10:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300045 2013-Feb-22 02:10:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:10:53 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2013-Feb-22 02:10:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:10:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:10:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:10:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:10:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:10:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22254.00 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:10:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:11:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:11:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:11:04 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2013-Feb-22 02:11:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:11:04 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2013-Feb-22 02:11:04 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Feb-22 02:11:04 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:11:04 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:11:04 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:11:04 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14536 J 2013-Feb-22 02:11:04 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:11:04 LOG2 antvel: Parameters to Doppler: Topocentric 22263 2013 53 0.0 2013-Feb-22 02:11:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:11:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:11:04 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:11:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:11:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:11:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:11:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:11:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Feb-22 02:11:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:11:04 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2013-Feb-22 02:11:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:11:05 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 11.888349 2013.1453552551525 18.999933 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 19.833333333333336 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 1 11.407519535700134 19.830988282054470 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 2 11.403575575013154 19.911395776607666 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 3 11.396051721566534 19.914585824421639 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 4 11.392476486808333 19.835081960977536 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 5 11.396491690804931 19.754207400675739 2013-Feb-22 02:11:05 LOG4 log_alfabeam: ALFABEAM 6 11.404010097913494 19.753303212635437 2013-Feb-22 02:11:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300046 2013-Feb-22 02:11:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:11:05 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Feb-22 02:11:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:11:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:11:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:11:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:11:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22266.00 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:11:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:11:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:11:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:11:16 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Feb-22 02:11:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:11:16 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2013-Feb-22 02:11:16 INFO2 smartfreq: Switching off CAL 2013-Feb-22 02:11:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:11:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:11:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:11:16 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2013-Feb-22 02:11:16 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:11:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:11:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:11:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:11:16 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2013-Feb-22 02:11:16 INFO3 restore_frequencies: Restoring original frequencies 2013-Feb-22 02:11:16 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:11:16 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14536 J 2013-Feb-22 02:11:17 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:11:17 LOG2 antvel: Parameters to Doppler: Topocentric 22276 2013 53 0.0 2013-Feb-22 02:11:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:11:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Feb-22 02:11:17 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Feb-22 02:11:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:11:17 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:11:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:11:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:11:17 STOP finish_task: Finishing task 'smart frequency switching' 2013-Feb-22 02:11:17 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2013-Feb-22 02:11:17 DONE finish_task: DONE finished pattern: smart frequency switching 2013-Feb-22 02:11:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:11:17 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2013-Feb-22 02:11:17 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2013-Feb-22 02:11:17 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock_cima33.conf' 2013-Feb-22 02:11:17 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Feb-22 02:11:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:11:17 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Feb-22 02:11:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:11:17 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2013-Feb-22 02:11:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:11:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2013-Feb-22 02:11:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:17 LOG2 CIMA-antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14536 J 2013-Feb-22 02:11:17 LOG2 CIMA-antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:11:17 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 22277 2013 53 0.0 2013-Feb-22 02:11:17 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Feb-22 02:11:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2013-Feb-22 02:11:19 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2013-Feb-22 02:11:20 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2013-Feb-22 02:11:21 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2013-Feb-22 02:11:22 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2013-Feb-22 02:11:22 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2013-Feb-22 02:11:22 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2013-Feb-22 02:11:22 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2013-Feb-22 02:11:22 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2013-Feb-22 02:11:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:11:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Feb-22 02:11:22 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2013-Feb-22 02:11:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Feb-22 02:11:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Feb-22 02:11:22 LOG1 config_iflo: Receiver ALFA already selected 2013-Feb-22 02:11:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:11:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:11:22 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:11:22 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2013-Feb-22 02:11:22 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:11:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:11:22 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2013-Feb-22 02:11:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:11:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:11:22 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Feb-22 02:11:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Feb-22 02:11:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Feb-22 02:11:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Feb-22 02:11:22 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Feb-22 02:11:23 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Feb-22 02:11:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:11:23 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Feb-22 02:11:23 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Feb-22 02:11:23 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Feb-22 02:11:23 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Feb-22 02:11:23 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Feb-22 02:11:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Feb-22 02:11:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:11:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Feb-22 02:11:23 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:23 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:11:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Feb-22 02:11:23 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2013-Feb-22 02:11:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Feb-22 02:11:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Feb-22 02:11:23 LOG5 finish_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2013-Feb-22 02:11:23 DONE finish_task: DONE finished configuration: IF/LO path 2013-Feb-22 02:11:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:11:23 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Feb-22 02:11:23 LOG5 end_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2013-Feb-22 02:11:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Feb-22 02:11:23 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2013-Feb-22 02:11:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Feb-22 02:11:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Feb-22 02:11:23 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 02:11:23 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 02:11:23 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2013-Feb-22 02:11:23 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 02:11:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 02:11:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:11:24 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 02:11:24 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2013-Feb-22 02:11:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:24 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 02:11:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:11:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:24 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:11:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 02:11:24 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2013-Feb-22 02:11:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 02:11:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 02:11:24 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2013-Feb-22 02:11:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:11:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:11:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:11:24 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2013-Feb-22 02:11:24 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:11:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:11:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:11:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:11:24 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Feb-22 02:11:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:11:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:11:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:11:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:11:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 02:11:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 02:11:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:11:25 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2013-Feb-22 02:11:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Feb-22 02:11:25 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:11:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 02:11:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:11:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 02:11:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:11:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:11:25 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2013-Feb-22 02:11:25 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Feb-22 02:11:25 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Feb-22 02:11:25 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2013-Feb-22 02:11:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Feb-22 02:11:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:11:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Feb-22 02:11:25 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2013-Feb-22 02:11:25 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2013-Feb-22 02:11:25 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2013-Feb-22 02:11:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2013-Feb-22 02:11:25 INFO1 config_mock: Starting to configure the Mock spectrometer 2013-Feb-22 02:11:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 02:11:25 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 02:11:25 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2013-Feb-22 02:11:25 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 02:11:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 02:11:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:11:25 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 02:11:25 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Feb-22 02:11:26 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 02:11:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:26 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:11:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 02:11:26 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 02:11:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 02:11:26 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:11:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:11:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:11:26 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:11:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:11:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:11:26 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 02:11:26 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 02:11:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:11:26 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:11:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:11:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:11:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:11:26 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2013-Feb-22 02:11:26 LOG3 socket_wait: To MOCK: NOP 2013-Feb-22 02:11:26 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2013-Feb-22 02:11:26 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2013-Feb-22 02:11:26 LOG4 from_mock: From MOCK: nop ok 2013-Feb-22 02:11:27 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2013-Feb-22 02:11:27 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2013-Feb-22 02:11:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:0 k:a rf:1 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:1 k:b rf:5 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:2 k:c rf:2 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:3 k:d rf:6 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:4 k:e rf:3 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:5 k:f rf:7 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: PhilDbg:config_mock b:6 k:g rf:4 flip:-1 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2013-Feb-22 02:11:27 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2013-Feb-22 02:11:27 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2013-Feb-22 02:11:27 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2013-Feb-22 02:11:27 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2013-Feb-22 02:11:27 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2013-Feb-22 02:11:27 LOG4 from_mock: From MOCK: confok 2013-Feb-22 02:11:27 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2013-Feb-22 02:11:27 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2013-Feb-22 02:11:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2013-Feb-22 02:11:27 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2013-Feb-22 02:11:27 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2013-Feb-22 02:11:27 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2013-Feb-22 02:11:27 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2013-Feb-22 02:11:28 LOG4 from_mock: From MOCK: confok 2013-Feb-22 02:11:28 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2013-Feb-22 02:11:28 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2013-Feb-22 02:11:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2013-Feb-22 02:11:28 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2013-Feb-22 02:11:28 LOG5 finish_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2013-Feb-22 02:11:28 DONE finish_task: DONE finished configuring: the Mock spectrometer 2013-Feb-22 02:11:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:11:28 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2013-Feb-22 02:11:28 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2013-Feb-22 02:11:28 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Feb-22 02:11:28 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2013-Feb-22 02:11:28 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2013-Feb-22 02:11:28 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Feb-22 02:11:28 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES1367_p3_002) < 112312 THEN' 2013-Feb-22 02:11:29 LOG3 is_if_valid: Current source data: up 127.9 5.6 UP - - 63 1.1 2013-Feb-22 02:11:29 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p3_002) < 112312 2013-Feb-22 02:11:29 INFO5 is_if_valid: Condition parsed as: 11.913367333333333 < 11.386666666666667 2013-Feb-22 02:11:29 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES1367_p3_002) < 112312 THEN' 2013-Feb-22 02:11:29 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=218.18 alfaangle=-15.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_002 ra=113400.00 dec=214830.00' 2013-Feb-22 02:11:29 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=218.18 alfaangle=-15.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_002 ra=113400.00 dec=214830.00' in non-true conditional branch 2013-Feb-22 02:11:29 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2013-Feb-22 02:11:29 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGES1367_p3_004) < 114612 THEN' 2013-Feb-22 02:11:31 LOG3 is_if_valid: Current source data: up 127.4 5.6 UP - - 63 1.0 2013-Feb-22 02:11:31 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p3_004) < 114612 2013-Feb-22 02:11:31 INFO5 is_if_valid: Condition parsed as: 11.911700666666668 < 11.770000000000001 2013-Feb-22 02:11:31 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES1367_p3_004) < 114612 THEN' 2013-Feb-22 02:11:31 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=141.42 alfaangle=54.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_004 ra=113400.00 dec=214530.00' 2013-Feb-22 02:11:31 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=141.42 alfaangle=54.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_004 ra=113400.00 dec=214530.00' in non-true conditional branch 2013-Feb-22 02:11:31 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2013-Feb-22 02:11:31 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES1367_p3_006) < 120912 THEN' 2013-Feb-22 02:11:32 LOG3 is_if_valid: Current source data: up 127.0 5.6 UP - - 63 1.0 2013-Feb-22 02:11:32 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p3_006) < 120912 2013-Feb-22 02:11:32 INFO5 is_if_valid: Condition parsed as: 11.911700666666668 < 12.153333333333334 2013-Feb-22 02:11:32 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=113.46 alfaangle=85.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_006 ra=113400.00 dec=214230.00' 2013-Feb-22 02:11:32 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 02:11:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:11:32 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 113.46 85.5 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p3_006 113400.00 214230.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:11:32 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 02:11:32 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2013-Feb-22 02:11:32 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2013-Feb-22 02:11:33 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 02:11:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p3_006} 2013-Feb-22 02:11:33 INFO3 fixed_driftmap: Sending telescope to Az = 113.46 and ZA = 8.74 2013-Feb-22 02:11:33 LOG3 track_source: Calling 'track_source AGES1367_p3_006 113.46 8.7377021290 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:11:33 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:11:33 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Feb-22 02:11:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_006} INFO {Slewing to source 'AGES1367_p3_006' ...} 2013-Feb-22 02:11:33 INFO1 track_source: Starting to track AGES1367_p3_006 2013-Feb-22 02:11:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_006" 2013-Feb-22 02:11:33 LOG3 vw_send: To DATATAKING: set ra 113.46 2013-Feb-22 02:11:33 LOG3 vw_send: To DATATAKING: set dec 8.7377021290 2013-Feb-22 02:11:33 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:11:33 LOG3 vw_send: To DATATAKING: pnt tr 113.46 8.7377021290 -CF 2013-Feb-22 02:11:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:11:33 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:11:33 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Feb-22 02:11:33 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:11:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:11:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:11:33 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2013-Feb-22 02:11:33 START begin_task: Starting task 'rotate ALFA to +85.5 degrees' 2013-Feb-22 02:11:33 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Feb-22 02:11:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +85.5 degrees ...} 2013-Feb-22 02:11:33 INFO2 rotate_alfa: ALFA commanded to +85.5 degrees 2013-Feb-22 02:11:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 85.5 REPLY 2013-Feb-22 02:11:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 02:11:33 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 02:11:33 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2013-Feb-22 02:11:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_006" 2013-Feb-22 02:11:33 LOG4 got_cormsg: From DATATAKING: set ra 113.46 2013-Feb-22 02:11:33 LOG4 got_cormsg: From DATATAKING: vw% 113.46 2013-Feb-22 02:11:33 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: set dec 8.7377021290 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: 8.7377021290 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: pnt tr 113.46 8.7377021290 -CF 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:11:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:12:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 02:12:11 INFO3 alfa_motor: ALFA rotator in-position +85.50 degrees 2013-Feb-22 02:12:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 02:12:11 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2013-Feb-22 02:12:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:12:11 STOP finish_task: Finishing task 'rotate ALFA to +85.5 degrees' 2013-Feb-22 02:12:11 LOG5 finish_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Feb-22 02:12:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to +85.5 degrees 2013-Feb-22 02:12:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:12:11 STOP end_task: Finishing task 'rotate ALFA to +85.5 degrees' with status 'OK' 2013-Feb-22 02:12:11 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2013-Feb-22 02:12:11 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:12:11 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2013-Feb-22 02:12:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:12:11 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:12:11 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:12:11 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Feb-22 02:12:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:12:17 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Feb-22 02:12:17 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:12:17 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:12:25 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:12:25 INFO2 waittrk: Now tracking AGES1367_p3_006 2013-Feb-22 02:12:25 LOG4 waittrk: Current telescope position: Az = 113.27 ZA = 8.74 2013-Feb-22 02:12:25 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:12:25 LOG5 finish_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:12:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:12:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:12:25 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 02:12:25 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 02:12:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 02:12:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:12:25 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 02:12:25 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 02:12:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:12:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:12:25 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:12:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 02:12:25 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2013-Feb-22 02:12:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 02:12:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:12:26 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 02:12:26 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:12:26 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2013-Feb-22 02:12:26 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:12:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:12:26 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2013-Feb-22 02:12:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:12:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 02:12:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:12:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:12:26 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:12:26 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Feb-22 02:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:12:26 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:12:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:12:26 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Feb-22 02:12:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:12:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:12:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 02:12:26 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2013-Feb-22 02:12:26 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 02:12:26 INFO2 astwait: Waiting for 809 seconds from 06:12:26 to 06:25:55 UTC ... 2013-Feb-22 02:12:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 809 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 02:12:26 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 02:12:26 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Feb-22 02:25:55 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 02:25:55 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2013-Feb-22 02:25:55 INFO3 astwait: Finished waiting 2013-Feb-22 02:25:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:25:55 LOG5 dopset_later: Calling 'dopset_later 60.836268750569189' 2013-Feb-22 02:25:55 INFO3 dopset_later: Setting Doppler correction for 02:26:55 (60.8 seconds from now) 2013-Feb-22 02:25:55 LOG5 antvel: Calling 'antvel 113.460000 8.737702 F Heliocentric 60.836268750569189' 2013-Feb-22 02:25:55 LOG2 antvel: Transforming current Az = 113.46 ZA = 8.74 to apparent RA = 11:34:43.1 Dec = +21:37:52.2 2013-Feb-22 02:25:55 LOG2 antvel: Parameters to Doppler: Heliocentric 23215 2013 53 0.0 2013-Feb-22 02:25:55 INFO5 antvel: Computed antenna velocity: -6.07214 km/s 2013-Feb-22 02:25:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-6.0721413352000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 02:25:55 INFO4 dopset_gen: New sky frequencies: 1381.271405 1381.271405 1381.271405 1381.271405 1381.271405 1381.271405 1381.271405 1381.271405 1381.271405 2013-Feb-22 02:25:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.271405 sky0=1381.271405 sky1=1381.271405 sky2=1381.271405 sky3=1381.271405 sky4=1381.271405 sky5=1381.271405 sky6=1381.271405 sky7=1381.271405 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:25:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.271405 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631271405.0} 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:25:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 02:25:55 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 02:25:55 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:04.0 Dec = +21:42:13.9 2013-Feb-22 02:25:55 LOG3 track_source: Calling 'track_source AGES1367_p3_006 113304.0 214213.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:25:55 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:25:55 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2013-Feb-22 02:25:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_006} INFO {Slewing to source 'AGES1367_p3_006' ...} 2013-Feb-22 02:25:55 INFO1 track_source: Starting to track AGES1367_p3_006 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_006" 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: set ra 113304.0 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: set dec 214213.9 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: pnt tr 113304.0 214213.9 -CJ 2013-Feb-22 02:25:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:25:55 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:25:55 LOG5 finish_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2013-Feb-22 02:25:55 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:25:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:25:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:25:56 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2013-Feb-22 02:25:56 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:25:56 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2013-Feb-22 02:25:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:25:56 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:25:56 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:25:56 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631271405.0} 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_006" 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: set ra 113304.0 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% 113304.0 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: set dec 214213.9 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: 214213.9 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: pnt tr 113304.0 214213.9 -CJ 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:25:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:26:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:26:01 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2013-Feb-22 02:26:01 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:26:01 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Feb-22 02:26:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:26:02 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Feb-22 02:26:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:26:02 INFO2 waittrk: Now tracking AGES1367_p3_006 2013-Feb-22 02:26:02 LOG4 waittrk: Current telescope position: Az = 113.21 ZA = 8.75 2013-Feb-22 02:26:02 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:26:02 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2013-Feb-22 02:26:02 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:26:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:26:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:26:02 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2013-Feb-22 02:26:02 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 02:26:02 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2013-Feb-22 02:26:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 02:26:02 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 02:26:02 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 02:26:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 02:26:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:26:02 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 02:26:02 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2013-Feb-22 02:26:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 02:26:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:26:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:26:05 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:26:05 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 02:26:05 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2013-Feb-22 02:26:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 02:26:05 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:26:05 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2013-Feb-22 02:26:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:26:05 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:26:05 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:26:05 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:26:05 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:26:05 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 02:26:05 LOG5 begin_task: Level: (5) ID = <10204> Status = 0 0 0 0 ok 2013-Feb-22 02:26:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 02:26:06 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:26:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 4 7 dB 2013-Feb-22 02:26:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 5 dB --- beam 3: 5 3 dB 2013-Feb-22 02:26:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 7 dB --- beam 5: 8 6 dB 2013-Feb-22 02:26:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Feb-22 02:26:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 02:26:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 02:26:06 LOG5 end_task: Level: (5) ID = <10204> Status = 0 0 0 0 ok 2013-Feb-22 02:26:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.975 1.103 ALFA beam 1: 0.954 1.130 2013-Feb-22 02:26:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.921 1.100 ALFA beam 3: 0.980 1.014 2013-Feb-22 02:26:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.926 1.112 ALFA beam 5: 1.078 1.073 2013-Feb-22 02:26:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.966 0.948 ALFA beam 7: 1.070 1.117 2013-Feb-22 02:26:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:26:06 LOG5 finish_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2013-Feb-22 02:26:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 02:26:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:26:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:26:06 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2013-Feb-22 02:26:06 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 02:26:06 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2013-Feb-22 02:26:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:26:06 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 02:26:06 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 02:26:06 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 02:26:06 LOG5 begin_task: Level: (5) ID = <10206> Status = 0 0 0 0 ok 2013-Feb-22 02:26:10 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 02:26:10 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 02:26:10 LOG5 task_failed: Level: (5) ID = <10206> Status = 0 0 0 0 ok 2013-Feb-22 02:26:10 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 02:26:10 LOG5 end_task: Level: (5) ID = <10206> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 02:26:10 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 02:26:10 LOG5 finish_task: Level: (4) ID = <10205> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 02:26:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 02:26:10 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 02:26:10 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 02:26:10 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 02:26:10 LOG5 finish_task: Level: (3) ID = <10201> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 02:26:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 02:26:10 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 02:26:10 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 02:26:10 LOG5 finish_task: Level: (2) ID = <10185> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 02:26:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:26:10 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 02:26:10 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 ALERT run_command_file: Stopping command file processing at line 48! 2013-Feb-22 02:26:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 02:26:10 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 02:26:10 LOG5 finish_task: Level: (1) ID = <10083> Status = 0 0 0 1 failed 2013-Feb-22 02:26:10 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 02:26:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:26:10 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 02:26:10 LOG5 end_task: Level: (1) ID = <10083> Status = 0 0 0 1 failed 2013-Feb-22 02:26:27 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 02:26:27 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 51 1 56 2013-Feb-22 02:26:27 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 51 1 56' 2013-Feb-22 02:26:27 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 02:26:27 LOG5 begin_task: Level: (1) ID = <10207> Status = 0 0 0 0 ok 2013-Feb-22 02:26:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 02:26:27 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 51 2013-Feb-22 02:26:28 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2013-Feb-22 02:26:28 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2013-Feb-22 02:26:28 LOG1 task_failed: Task 'running command file '130222.cmd'' failed! 2013-Feb-22 02:26:28 LOG5 task_failed: Level: (1) ID = <10207> Status = 0 0 0 0 ok 2013-Feb-22 02:26:28 ALERT run_command_file: Stopping command file processing at line 51! 2013-Feb-22 02:26:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 02:26:28 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 02:26:28 LOG5 finish_task: Level: (1) ID = <10207> Status = 0 0 0 1 failed 2013-Feb-22 02:26:28 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 02:26:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:26:28 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 02:26:28 LOG5 end_task: Level: (1) ID = <10207> Status = 0 0 0 1 failed 2013-Feb-22 02:26:35 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 02:26:35 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 52 1 56 2013-Feb-22 02:26:35 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 52 1 56' 2013-Feb-22 02:26:35 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 02:26:35 LOG5 begin_task: Level: (1) ID = <10208> Status = 0 0 0 0 ok 2013-Feb-22 02:26:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 02:26:35 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 52 2013-Feb-22 02:26:35 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES1367_p3_008) < 123212 THEN' 2013-Feb-22 02:26:36 LOG3 is_if_valid: Current source data: up 113.3 8.7 UP - - 48 0.1 2013-Feb-22 02:26:36 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p3_008) < 123212 2013-Feb-22 02:26:36 INFO5 is_if_valid: Condition parsed as: 12.149335666666667 < 12.536666666666667 2013-Feb-22 02:26:36 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=105.83 alfaangle=-83.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_008 ra=113400.00 dec=213930.00' 2013-Feb-22 02:26:36 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 02:26:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:26:37 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 105.83 -83.5 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p3_008 113400.00 213930.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:26:37 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 02:26:37 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2013-Feb-22 02:26:37 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p3_006' 2013-Feb-22 02:26:37 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 02:26:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p3_008} 2013-Feb-22 02:26:37 INFO3 fixed_driftmap: Sending telescope to Az = 105.83 and ZA = 13.89 2013-Feb-22 02:26:37 LOG3 track_source: Calling 'track_source AGES1367_p3_008 105.83 13.8866167660 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:26:37 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:26:37 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2013-Feb-22 02:26:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_008} INFO {Slewing to source 'AGES1367_p3_008' ...} 2013-Feb-22 02:26:37 INFO1 track_source: Starting to track AGES1367_p3_008 2013-Feb-22 02:26:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_008" 2013-Feb-22 02:26:37 LOG3 vw_send: To DATATAKING: set ra 105.83 2013-Feb-22 02:26:37 LOG3 vw_send: To DATATAKING: set dec 13.8866167660 2013-Feb-22 02:26:37 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:26:37 LOG3 vw_send: To DATATAKING: pnt tr 105.83 13.8866167660 -CF 2013-Feb-22 02:26:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:26:37 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:26:37 LOG5 finish_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2013-Feb-22 02:26:37 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:26:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:26:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:26:37 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2013-Feb-22 02:26:37 START begin_task: Starting task 'rotate ALFA to -83.5 degrees' 2013-Feb-22 02:26:37 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2013-Feb-22 02:26:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -83.5 degrees ...} 2013-Feb-22 02:26:37 INFO2 rotate_alfa: ALFA commanded to -83.5 degrees 2013-Feb-22 02:26:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION -83.5 REPLY 2013-Feb-22 02:26:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 02:26:38 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 02:26:38 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_008" 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: set ra 105.83 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: vw% 105.83 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: set dec 13.8866167660 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: 13.8866167660 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: pnt tr 105.83 13.8866167660 -CF 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:26:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:28:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 02:28:11 INFO3 alfa_motor: ALFA rotator in-position -83.50 degrees 2013-Feb-22 02:28:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 02:28:11 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2013-Feb-22 02:28:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:28:11 STOP finish_task: Finishing task 'rotate ALFA to -83.5 degrees' 2013-Feb-22 02:28:11 LOG5 finish_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2013-Feb-22 02:28:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to -83.5 degrees 2013-Feb-22 02:28:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:28:11 STOP end_task: Finishing task 'rotate ALFA to -83.5 degrees' with status 'OK' 2013-Feb-22 02:28:11 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2013-Feb-22 02:28:11 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:28:11 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2013-Feb-22 02:28:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:28:11 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:28:11 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:28:11 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2013-Feb-22 02:28:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:28:16 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2013-Feb-22 02:28:17 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:28:17 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2013-Feb-22 02:28:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:28:47 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2013-Feb-22 02:28:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:28:47 INFO2 waittrk: Now tracking AGES1367_p3_008 2013-Feb-22 02:28:47 LOG4 waittrk: Current telescope position: Az = 105.59 ZA = 13.89 2013-Feb-22 02:28:47 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:28:47 LOG5 finish_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2013-Feb-22 02:28:47 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:28:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:28:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:28:47 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2013-Feb-22 02:28:47 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 02:28:47 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2013-Feb-22 02:28:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 02:28:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 02:28:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:28:47 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 02:28:47 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2013-Feb-22 02:28:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 02:28:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:28:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:28:48 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:28:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 02:28:48 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2013-Feb-22 02:28:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 02:28:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:28:48 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 02:28:48 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:28:48 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2013-Feb-22 02:28:48 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:28:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:28:48 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2013-Feb-22 02:28:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:28:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 02:28:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:28:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:28:48 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:28:48 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Feb-22 02:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:28:48 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:28:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:28:48 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Feb-22 02:28:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:28:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:28:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 02:28:48 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2013-Feb-22 02:28:48 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 02:28:48 INFO2 astwait: Waiting for 1204 seconds from 06:28:48 to 06:48:52 UTC ... 2013-Feb-22 02:28:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1204 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 02:28:48 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 02:28:48 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2013-Feb-22 02:48:52 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 02:48:52 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2013-Feb-22 02:48:52 INFO3 astwait: Finished waiting 2013-Feb-22 02:48:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:48:52 LOG5 dopset_later: Calling 'dopset_later 61.387772083104224' 2013-Feb-22 02:48:52 INFO3 dopset_later: Setting Doppler correction for 02:49:52 (61.4 seconds from now) 2013-Feb-22 02:48:52 LOG5 antvel: Calling 'antvel 105.830000 13.886617 F Heliocentric 61.387772083104224' 2013-Feb-22 02:48:52 LOG2 antvel: Transforming current Az = 105.83 ZA = 13.89 to apparent RA = 11:34:43.1 Dec = +21:34:52.2 2013-Feb-22 02:48:52 LOG2 antvel: Parameters to Doppler: Heliocentric 24592 2013 53 0.0 2013-Feb-22 02:48:52 INFO5 antvel: Computed antenna velocity: -6.03608 km/s 2013-Feb-22 02:48:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-6.0360798959000004 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 02:48:52 INFO4 dopset_gen: New sky frequencies: 1381.271239 1381.271239 1381.271239 1381.271239 1381.271239 1381.271239 1381.271239 1381.271239 1381.271239 2013-Feb-22 02:48:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.271239 sky0=1381.271239 sky1=1381.271239 sky2=1381.271239 sky3=1381.271239 sky4=1381.271239 sky5=1381.271239 sky6=1381.271239 sky7=1381.271239 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:48:52 LOG2 dopset_gen: Result from 'sky2syn': 1631.271239 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631271239.0} 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:48:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 02:48:52 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 02:48:52 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.5 Dec = +21:39:13.9 2013-Feb-22 02:48:52 LOG3 track_source: Calling 'track_source AGES1367_p3_008 113303.5 213913.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:48:52 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:48:52 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2013-Feb-22 02:48:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_008} INFO {Slewing to source 'AGES1367_p3_008' ...} 2013-Feb-22 02:48:52 INFO1 track_source: Starting to track AGES1367_p3_008 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_008" 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: set ra 113303.5 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: set dec 213913.9 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: pnt tr 113303.5 213913.9 -CJ 2013-Feb-22 02:48:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:48:52 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:48:52 LOG5 finish_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2013-Feb-22 02:48:52 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:48:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:48:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:48:53 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2013-Feb-22 02:48:53 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:48:53 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2013-Feb-22 02:48:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:48:53 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:48:53 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:48:53 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631271239.0} 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_008" 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: set ra 113303.5 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: set dec 213913.9 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.5 213913.9 -CJ 2013-Feb-22 02:48:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:48:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 113303.5 2013-Feb-22 02:48:54 LOG4 got_cormsg: From DATATAKING: vw% 213913.9 2013-Feb-22 02:48:54 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2013-Feb-22 02:48:58 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:48:58 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2013-Feb-22 02:48:58 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:48:58 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2013-Feb-22 02:49:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:49:00 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2013-Feb-22 02:49:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:49:00 INFO2 waittrk: Now tracking AGES1367_p3_008 2013-Feb-22 02:49:00 LOG4 waittrk: Current telescope position: Az = 105.55 ZA = 13.91 2013-Feb-22 02:49:00 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:49:00 LOG5 finish_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2013-Feb-22 02:49:00 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:49:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:49:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:49:00 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2013-Feb-22 02:49:00 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 02:49:00 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2013-Feb-22 02:49:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 02:49:00 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 02:49:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 02:49:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 02:49:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:49:00 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 02:49:01 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2013-Feb-22 02:49:01 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 02:49:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:49:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:03 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:49:03 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 02:49:03 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2013-Feb-22 02:49:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 02:49:03 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:49:03 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2013-Feb-22 02:49:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:49:04 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:49:04 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:49:04 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:49:04 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:49:04 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 02:49:04 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2013-Feb-22 02:49:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 02:49:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 02:49:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 5 dB --- beam 3: 5 3 dB 2013-Feb-22 02:49:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 9 7 dB 2013-Feb-22 02:49:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 10 5 dB 2013-Feb-22 02:49:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 02:49:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 02:49:04 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2013-Feb-22 02:49:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.047 0.888 ALFA beam 1: 0.980 0.845 2013-Feb-22 02:49:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.904 1.064 ALFA beam 3: 0.969 1.047 2013-Feb-22 02:49:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.962 0.933 ALFA beam 5: 0.969 0.980 2013-Feb-22 02:49:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.044 0.979 ALFA beam 7: 0.919 0.922 2013-Feb-22 02:49:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:49:04 LOG5 finish_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2013-Feb-22 02:49:04 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 02:49:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:49:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:49:04 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2013-Feb-22 02:49:04 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 02:49:05 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2013-Feb-22 02:49:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:49:05 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 02:49:05 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 02:49:05 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 02:49:05 LOG5 begin_task: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2013-Feb-22 02:49:08 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 02:49:08 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 02:49:08 LOG5 task_failed: Level: (5) ID = <10230> Status = 0 0 0 0 ok 2013-Feb-22 02:49:08 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 02:49:08 LOG5 end_task: Level: (5) ID = <10230> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 02:49:08 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 02:49:08 LOG5 finish_task: Level: (4) ID = <10229> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 02:49:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 02:49:08 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 02:49:08 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 02:49:08 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 02:49:08 LOG5 finish_task: Level: (3) ID = <10225> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 02:49:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 02:49:08 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 02:49:08 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 02:49:08 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 02:49:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:49:08 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 02:49:08 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 1 failed 2013-Feb-22 02:49:08 ALERT run_command_file: Stopping command file processing at line 55! 2013-Feb-22 02:49:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 02:49:08 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 02:49:08 LOG5 finish_task: Level: (1) ID = <10208> Status = 0 0 0 1 failed 2013-Feb-22 02:49:09 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 02:49:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:49:09 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 02:49:09 LOG5 end_task: Level: (1) ID = <10208> Status = 0 0 0 1 failed 2013-Feb-22 02:49:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 02:49:36 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 58 1 56 2013-Feb-22 02:49:36 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 58 1 56' 2013-Feb-22 02:49:36 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 02:49:36 LOG5 begin_task: Level: (1) ID = <10231> Status = 0 0 0 0 ok 2013-Feb-22 02:49:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 02:49:36 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 58 2013-Feb-22 02:49:36 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2013-Feb-22 02:49:36 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2013-Feb-22 02:49:36 LOG1 task_failed: Task 'running command file '130222.cmd'' failed! 2013-Feb-22 02:49:36 LOG5 task_failed: Level: (1) ID = <10231> Status = 0 0 0 0 ok 2013-Feb-22 02:49:37 ALERT run_command_file: Stopping command file processing at line 58! 2013-Feb-22 02:49:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 02:49:37 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 02:49:37 LOG5 finish_task: Level: (1) ID = <10231> Status = 0 0 0 1 failed 2013-Feb-22 02:49:37 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 02:49:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 02:49:37 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 02:49:37 LOG5 end_task: Level: (1) ID = <10231> Status = 0 0 0 1 failed 2013-Feb-22 02:49:45 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 02:49:45 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 59 1 56 2013-Feb-22 02:49:45 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 59 1 56' 2013-Feb-22 02:49:45 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 02:49:45 LOG5 begin_task: Level: (1) ID = <10232> Status = 0 0 0 0 ok 2013-Feb-22 02:49:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 02:49:45 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 59 2013-Feb-22 02:49:45 COMMAND run_command_line: EXECUTING command 63: 'LOAD togs_cima33.conf' 2013-Feb-22 02:49:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Feb-22 02:49:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:49:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Feb-22 02:49:45 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Feb-22 02:49:45 LOG2 CIMA-antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:49:45 LOG2 CIMA-antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:49:45 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 24585 2013 53 0.0 2013-Feb-22 02:49:45 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Feb-22 02:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Feb-22 02:49:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:49:47 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Feb-22 02:49:47 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2013-Feb-22 02:49:47 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Feb-22 02:49:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Feb-22 02:49:47 LOG1 config_iflo: Receiver ALFA already selected 2013-Feb-22 02:49:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:49:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:49:47 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:49:47 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2013-Feb-22 02:49:47 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:49:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:49:47 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2013-Feb-22 02:49:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:49:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:49:48 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Feb-22 02:49:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Feb-22 02:49:48 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Feb-22 02:49:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Feb-22 02:49:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Feb-22 02:49:48 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Feb-22 02:49:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Feb-22 02:49:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:49:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Feb-22 02:49:48 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:48 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:49:49 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Feb-22 02:49:49 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Feb-22 02:49:49 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Feb-22 02:49:49 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 DONE finish_task: DONE finished configuration: IF/LO path 2013-Feb-22 02:49:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:49:49 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Feb-22 02:49:49 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Feb-22 02:49:49 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Feb-22 02:49:49 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Feb-22 02:49:49 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 02:49:49 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 02:49:49 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 02:49:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 02:49:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:49:49 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 02:49:49 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:49 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 02:49:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:49 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:49:49 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 02:49:49 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 02:49:49 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 02:49:49 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2013-Feb-22 02:49:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:49:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:49:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:49:50 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Feb-22 02:49:50 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:49:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:49:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:49:50 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:49:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:49:50 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 02:49:50 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 02:49:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:49:50 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2013-Feb-22 02:49:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Feb-22 02:49:50 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:49:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 02:49:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:49:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 02:49:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:49:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:49:50 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2013-Feb-22 02:49:51 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Feb-22 02:49:51 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Feb-22 02:49:51 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2013-Feb-22 02:49:51 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Feb-22 02:49:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:49:51 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Feb-22 02:49:51 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2013-Feb-22 02:49:51 COMMAND run_command_line: EXECUTING command 64: 'CATALOG togs_ages.cat' 2013-Feb-22 02:49:51 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Feb-22 02:49:51 COMMAND run_command_line: EXECUTING command 65: 'IF isup(galfasrc) then' 2013-Feb-22 02:49:51 LOG3 is_if_valid: Current source data: rising 247.5 21.6 9 - - 168 5.9 2013-Feb-22 02:49:51 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Feb-22 02:49:51 INFO5 is_if_valid: Condition parsed as: 0 2013-Feb-22 02:49:51 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2013-Feb-22 02:49:51 COMMAND run_command_line: EXECUTING command 66: 'GOTO galfasrc' 2013-Feb-22 02:49:51 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2013-Feb-22 02:49:51 COMMAND run_command_line: EXECUTING command 67: 'ELSEIF isup(galfasrc2) then' 2013-Feb-22 02:49:51 LOG3 is_if_valid: Current source data: setting 97.8 16.0 UP - - 16 0.8 2013-Feb-22 02:49:51 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2013-Feb-22 02:49:51 INFO5 is_if_valid: Condition parsed as: 1 2013-Feb-22 02:49:51 COMMAND run_command_line: EXECUTING command 68: 'GOTO galfasrc2' 2013-Feb-22 02:49:51 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2013-Feb-22 02:49:51 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2013-Feb-22 02:49:51 LOG5 begin_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2013-Feb-22 02:49:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2013-Feb-22 02:49:51 LOG3 track_source: Calling 'track_source galfasrc2 112400.0 +195000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Feb-22 02:49:51 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:49:51 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Feb-22 02:49:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2013-Feb-22 02:49:52 INFO1 track_source: Starting to track galfasrc2 2013-Feb-22 02:49:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2013-Feb-22 02:49:52 LOG3 vw_send: To DATATAKING: set ra 112400.0 2013-Feb-22 02:49:52 LOG3 vw_send: To DATATAKING: set dec +195000 2013-Feb-22 02:49:52 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:49:52 LOG3 vw_send: To DATATAKING: pnt tr 112400.0 +195000 -CJ 2013-Feb-22 02:49:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Feb-22 02:49:52 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:49:52 LOG5 finish_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Feb-22 02:49:52 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:49:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:49:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:49:52 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2013-Feb-22 02:49:52 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2013-Feb-22 02:49:52 LOG5 finish_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2013-Feb-22 02:49:52 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2013-Feb-22 02:49:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:49:52 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2013-Feb-22 02:49:52 LOG5 end_task: Level: (2) ID = <10241> Status = 0 0 0 0 ok 2013-Feb-22 02:49:52 COMMAND run_command_line: EXECUTING command 69: 'ELSE' 2013-Feb-22 02:49:52 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Feb-22 02:49:52 COMMAND run_command_line: EXECUTING command 70: 'TRACKCURPOS' 2013-Feb-22 02:49:52 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Feb-22 02:49:52 COMMAND run_command_line: EXECUTING command 71: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Feb-22 02:49:52 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Feb-22 02:49:52 COMMAND run_command_line: EXECUTING command 72: 'ENDIF' 2013-Feb-22 02:49:52 COMMAND run_command_line: EXECUTING command 73: 'ALFAANGLE 19' 2013-Feb-22 02:49:52 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Feb-22 02:49:53 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Feb-22 02:49:53 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2013-Feb-22 02:49:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Feb-22 02:49:53 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Feb-22 02:49:53 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Feb-22 02:49:53 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 02:49:53 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 02:49:53 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2013-Feb-22 02:49:53 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: set ra 112400.0 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: vw% 112400.0 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: set dec +195000 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: +195000 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: pnt tr 112400.0 +195000 -CJ 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Feb-22 02:49:53 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:50:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 02:50:50 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Feb-22 02:50:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 02:50:50 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2013-Feb-22 02:50:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:50:50 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Feb-22 02:50:50 LOG5 finish_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2013-Feb-22 02:50:50 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Feb-22 02:50:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:50:50 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Feb-22 02:50:50 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2013-Feb-22 02:50:50 COMMAND run_command_line: EXECUTING command 74: 'WAITTRACK' 2013-Feb-22 02:50:50 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:50:50 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2013-Feb-22 02:50:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:50:50 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:50:50 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:50:50 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2013-Feb-22 02:50:55 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:50:56 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:50:56 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 02:50:56 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:50:56 INFO2 waittrk: Now tracking galfasrc2 2013-Feb-22 02:50:56 LOG4 waittrk: Current telescope position: Az = 97.50 ZA = 16.27 2013-Feb-22 02:50:56 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 02:50:56 LOG5 finish_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 DONE finish_task: DONE finished waiting: telescope on source 2013-Feb-22 02:50:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:50:56 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 02:50:56 LOG5 end_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 COMMAND run_command_line: EXECUTING command 78: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Feb-22 02:50:56 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Feb-22 02:50:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:50:56 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Feb-22 02:50:56 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Feb-22 02:50:56 LOG5 begin_task: Level: (2) ID = <10248> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2013-Feb-22 02:50:56 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Feb-22 02:50:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Feb-22 02:50:56 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 02:50:56 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2013-Feb-22 02:50:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 02:50:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 02:50:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:50:56 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 02:50:57 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 02:50:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:50:57 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:50:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 02:50:57 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 02:50:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:50:57 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 02:50:57 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:50:57 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:50:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:50:57 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:50:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 02:50:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:50:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:50:57 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:50:57 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:50:57 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:50:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:50:57 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:50:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:50:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 02:50:57 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2013-Feb-22 02:50:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:50:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:50:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:50:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:50:58 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Feb-22 02:50:58 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Feb-22 02:50:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Feb-22 02:50:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:50:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:50:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:50:58 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2013-Feb-22 02:50:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 02:50:58 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:50:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:50:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:50:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:50:58 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2013-Feb-22 02:50:58 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Feb-22 02:50:58 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:50:58 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2013-Feb-22 02:50:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Feb-22 02:50:58 INFO2 adjust_power: Starting to adjust WAPP power 2013-Feb-22 02:50:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 02:50:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 02:50:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:50:58 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 02:50:58 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Feb-22 02:50:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 02:50:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:50:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20130222.a2048.0001.fits 2013-Feb-22 02:50:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130222.a2048.0001.fits} 2013-Feb-22 02:51:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:01 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:51:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 02:51:01 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Feb-22 02:51:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 02:51:01 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 02:51:01 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2013-Feb-22 02:51:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 02:51:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:51:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:51:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:51:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 02:51:01 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 02:51:01 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2013-Feb-22 02:51:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 02:51:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 02:51:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 6 dB --- beam 3: 5 4 dB 2013-Feb-22 02:51:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 9 7 dB 2013-Feb-22 02:51:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 10 5 dB 2013-Feb-22 02:51:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 02:51:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 02:51:02 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2013-Feb-22 02:51:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.051 0.940 ALFA beam 1: 1.053 0.987 2013-Feb-22 02:51:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.914 0.941 ALFA beam 3: 1.037 0.878 2013-Feb-22 02:51:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.013 1.007 ALFA beam 5: 0.952 0.954 2013-Feb-22 02:51:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.066 1.031 ALFA beam 7: 0.942 0.971 2013-Feb-22 02:51:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:51:02 LOG5 finish_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2013-Feb-22 02:51:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 02:51:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:51:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:51:02 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2013-Feb-22 02:51:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 02:51:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 02:51:02 LOG5 finish_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2013-Feb-22 02:51:02 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Feb-22 02:51:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:51:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 02:51:02 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2013-Feb-22 02:51:02 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Feb-22 02:51:02 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:51:02 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:51:02 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:51:02 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:51:02 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:51:02 LOG2 antvel: Parameters to Doppler: Topocentric 24661 2013 53 0.0 2013-Feb-22 02:51:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:51:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:51:02 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:51:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:51:02 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:51:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:51:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Feb-22 02:51:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:51:03 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2013-Feb-22 02:51:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:51:03 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.556284 2013.145431243187 18.999933 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333321 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 1 11.407461746446426 19.846811665350490 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 2 11.402698978952850 19.918246999951585 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 3 11.395230166726103 19.905085192369221 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 4 11.392540258013344 19.819566501601148 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 5 11.397334576933357 19.748036025524403 2013-Feb-22 02:51:03 LOG4 log_alfabeam: ALFABEAM 6 11.404787155838589 19.762118991768219 2013-Feb-22 02:51:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300047 2013-Feb-22 02:51:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:51:03 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2013-Feb-22 02:51:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:51:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:51:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:51:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24664.00 2013-Feb-22 02:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=2+3-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+2+3-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=2+3-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+2+3-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:05 LOG3 WAPP=1+2+3-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:51:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:51:14 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2013-Feb-22 02:51:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:51:14 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2013-Feb-22 02:51:14 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Feb-22 02:51:14 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:51:14 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:51:14 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:51:14 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:51:14 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:51:14 LOG2 antvel: Parameters to Doppler: Topocentric 24674 2013 53 0.0 2013-Feb-22 02:51:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:51:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:51:14 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:51:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:51:14 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:51:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:51:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Feb-22 02:51:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:51:14 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2013-Feb-22 02:51:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:51:15 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.559905 2013.1454316551321 18.999933 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333321 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 1 11.407461333592275 19.846857440370137 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 2 11.402696331197223 19.918264039939658 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 3 11.395227937249786 19.905055220833844 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 4 11.392540679331660 19.819521461139392 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 5 11.397337132541519 19.748020426310596 2013-Feb-22 02:51:15 LOG4 log_alfabeam: ALFABEAM 6 11.404789296440873 19.762147198677365 2013-Feb-22 02:51:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300048 2013-Feb-22 02:51:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:51:15 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2013-Feb-22 02:51:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:51:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:51:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:51:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24676.00 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:51:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:51:26 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2013-Feb-22 02:51:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:51:26 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2013-Feb-22 02:51:26 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Feb-22 02:51:26 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:51:26 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:51:26 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:51:26 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:51:26 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:51:26 LOG2 antvel: Parameters to Doppler: Topocentric 24686 2013 53 0.0 2013-Feb-22 02:51:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:51:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:51:26 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:51:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:51:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:51:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:51:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Feb-22 02:51:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:51:27 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2013-Feb-22 02:51:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:51:27 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.563248 2013.1454320353891 18.999933 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333321 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 1 11.407460952613329 19.846899540466190 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 2 11.402693895459812 19.918279697302932 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 3 11.395225887523949 19.905027643192831 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 4 11.392541068060527 19.819480035315742 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 5 11.397339483645235 19.748006090721756 2013-Feb-22 02:51:27 LOG4 log_alfabeam: ALFABEAM 6 11.404791264659710 19.762173155993533 2013-Feb-22 02:51:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300049 2013-Feb-22 02:51:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:51:27 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2013-Feb-22 02:51:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:51:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:51:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:51:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24688.00 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:51:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:51:38 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2013-Feb-22 02:51:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:51:38 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2013-Feb-22 02:51:38 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Feb-22 02:51:38 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:51:38 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:51:38 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:51:38 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:51:38 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:51:38 LOG2 antvel: Parameters to Doppler: Topocentric 24698 2013 53 0.0 2013-Feb-22 02:51:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:51:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:51:38 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:51:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:51:38 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:51:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:51:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Feb-22 02:51:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:51:38 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2013-Feb-22 02:51:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:51:39 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.566590 2013.1454324156462 18.999933 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333329 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 1 11.407460571920696 19.846941475253558 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 2 11.402691468763033 19.918295279261070 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 3 11.395223846573378 19.905000162133295 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 4 11.392541456439703 19.819438770898305 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 5 11.397341826151813 19.747991822171507 2013-Feb-22 02:51:39 LOG4 log_alfabeam: ALFABEAM 6 11.404793224644443 19.762199025610695 2013-Feb-22 02:51:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300050 2013-Feb-22 02:51:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:51:39 LOG5 begin_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2013-Feb-22 02:51:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:51:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:51:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:51:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24700.00 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:51:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:51:50 LOG5 end_task: Level: (4) ID = <10265> Status = 0 0 0 0 ok 2013-Feb-22 02:51:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:51:50 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2013-Feb-22 02:51:50 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Feb-22 02:51:50 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:51:50 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:51:50 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:51:50 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:51:50 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:51:50 LOG2 antvel: Parameters to Doppler: Topocentric 24710 2013 53 0.0 2013-Feb-22 02:51:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:51:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:51:50 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:51:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:51:50 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:51:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:51:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Feb-22 02:51:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:51:51 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2013-Feb-22 02:51:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:51:51 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.569933 2013.1454327959034 18.999933 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333311 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 1 11.407460191287448 19.846983271156315 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 2 11.402689049583582 19.918310795780332 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 3 11.395221813104214 19.904972760468073 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 4 11.392541844701432 19.819397641895474 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 5 11.397344161530992 19.747977611552262 2013-Feb-22 02:51:51 LOG4 log_alfabeam: ALFABEAM 6 11.404795177635597 19.762224823684658 2013-Feb-22 02:51:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300051 2013-Feb-22 02:51:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:51:51 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2013-Feb-22 02:51:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:51:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:51:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:51:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:51:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24712.00 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:51:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:52:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:52:02 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2013-Feb-22 02:52:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:52:02 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2013-Feb-22 02:52:02 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Feb-22 02:52:02 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:52:02 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:52:02 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:52:02 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:52:02 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:52:02 LOG2 antvel: Parameters to Doppler: Topocentric 24722 2013 53 0.0 2013-Feb-22 02:52:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:52:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:52:02 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:52:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:52:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:52:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:52:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Feb-22 02:52:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:52:02 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2013-Feb-22 02:52:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:52:03 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.573275 2013.1454331761604 18.999933 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333321 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 1 11.407459810942113 19.847024904482247 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 2 11.402686639298544 19.918326238211090 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 3 11.395219788261434 19.904945453857543 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 4 11.392542232613318 19.819356671631471 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 5 11.397346488452673 19.747963466804389 2013-Feb-22 02:52:03 LOG4 log_alfabeam: ALFABEAM 6 11.404797122531535 19.762250535448292 2013-Feb-22 02:52:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300052 2013-Feb-22 02:52:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:52:03 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2013-Feb-22 02:52:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:52:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:52:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:52:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24724.00 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:52:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:52:14 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2013-Feb-22 02:52:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:52:14 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2013-Feb-22 02:52:14 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Feb-22 02:52:14 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:52:14 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:52:14 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:52:14 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:52:14 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:52:14 LOG2 antvel: Parameters to Doppler: Topocentric 24734 2013 53 0.0 2013-Feb-22 02:52:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:52:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:52:14 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:52:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:52:14 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:52:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:52:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Feb-22 02:52:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:52:15 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2013-Feb-22 02:52:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:52:15 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.576618 2013.1454335564174 18.999933 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333325 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 1 11.407459430657855 19.847066401445026 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 2 11.402684236395997 19.918341616420594 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 3 11.395217770762496 19.904918225234557 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 4 11.392542620407433 19.819315834319973 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 5 11.397348808375764 19.747949378908174 2013-Feb-22 02:52:15 LOG4 log_alfabeam: ALFABEAM 6 11.404799060562189 19.762276176948678 2013-Feb-22 02:52:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300053 2013-Feb-22 02:52:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:52:15 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2013-Feb-22 02:52:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:52:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:52:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:52:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24736.00 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:52:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:52:26 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2013-Feb-22 02:52:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:52:26 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2013-Feb-22 02:52:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Feb-22 02:52:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Feb-22 02:52:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Feb-22 02:52:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:52:26 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Feb-22 02:52:26 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:52:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Feb-22 02:52:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:52:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:52:26 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Feb-22 02:52:26 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Feb-22 02:52:26 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:52:26 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:52:26 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:52:26 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:52:26 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:52:26 LOG2 antvel: Parameters to Doppler: Topocentric 24746 2013 53 0.0 2013-Feb-22 02:52:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:52:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:52:27 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:52:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:52:27 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:52:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:52:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Feb-22 02:52:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:52:27 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Feb-22 02:52:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:52:27 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.579960 2013.1454339366744 18.999933 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 1 11.407459050662911 19.847107738501926 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 2 11.402681842244810 19.918356921826710 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 3 11.395215761744485 19.904891090171425 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 4 11.392543007851748 19.819275153139419 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 5 11.397351119977959 19.747935355744065 2013-Feb-22 02:52:27 LOG4 log_alfabeam: ALFABEAM 6 11.404800990633341 19.762301733498276 2013-Feb-22 02:52:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300054 2013-Feb-22 02:52:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:52:27 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2013-Feb-22 02:52:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:52:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:52:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:52:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24748.00 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:52:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:52:38 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2013-Feb-22 02:52:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:52:38 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Feb-22 02:52:38 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Feb-22 02:52:38 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:52:38 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:52:38 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:52:38 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:52:38 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:52:38 LOG2 antvel: Parameters to Doppler: Topocentric 24758 2013 53 0.0 2013-Feb-22 02:52:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:52:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:52:38 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:52:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:52:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:52:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:52:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Feb-22 02:52:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:52:39 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2013-Feb-22 02:52:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:52:39 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.583302 2013.1454343169314 18.999933 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333336 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 1 11.407458670844131 19.847148929356717 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 2 11.402679456057037 19.918372159650247 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 3 11.395213760533609 19.904864039800312 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 4 11.392543395062294 19.819234614613652 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 5 11.397353424019244 19.747921392547607 2013-Feb-22 02:52:39 LOG4 log_alfabeam: ALFABEAM 6 11.404802913390263 19.762327213424694 2013-Feb-22 02:52:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300055 2013-Feb-22 02:52:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:52:39 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Feb-22 02:52:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:52:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:52:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:52:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24760.00 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:52:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:52:50 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Feb-22 02:52:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:52:50 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2013-Feb-22 02:52:50 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Feb-22 02:52:50 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:52:50 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:52:50 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:52:50 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14543 J 2013-Feb-22 02:52:50 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:52:50 LOG2 antvel: Parameters to Doppler: Topocentric 24769 2013 53 0.0 2013-Feb-22 02:52:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:52:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:52:50 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:52:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:52:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:52:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:52:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Feb-22 02:52:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:52:50 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2013-Feb-22 02:52:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:52:51 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.586366 2013.1454346655005 18.999933 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333321 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 1 11.407458322775417 19.847186566409402 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 2 11.402677275301146 19.918386071066571 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 3 11.395211932592565 19.904839313397005 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 4 11.392543749857893 19.819197572535259 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 5 11.397355529812982 19.747908643097542 2013-Feb-22 02:52:51 LOG4 log_alfabeam: ALFABEAM 6 11.404804669832668 19.762350507054418 2013-Feb-22 02:52:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300056 2013-Feb-22 02:52:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:52:51 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2013-Feb-22 02:52:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:52:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:52:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:52:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:52:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24772.00 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:53:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:53:02 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2013-Feb-22 02:53:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:53:02 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2013-Feb-22 02:53:02 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Feb-22 02:53:02 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:53:02 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:53:02 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:53:02 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:53:02 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:53:02 LOG2 antvel: Parameters to Doppler: Topocentric 24782 2013 53 0.0 2013-Feb-22 02:53:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:53:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:53:02 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:53:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:53:02 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:53:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:53:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Feb-22 02:53:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:53:03 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Feb-22 02:53:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:53:03 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.589987 2013.1454350774457 18.999933 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333332 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 1 11.407457911623965 19.847230889681303 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 2 11.402674706595528 19.918402439464668 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 3 11.395209780667864 19.904810182300004 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 4 11.392544168898119 19.819153948616069 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 5 11.397358010358939 19.747893639791602 2013-Feb-22 02:53:03 LOG4 log_alfabeam: ALFABEAM 6 11.404806737785519 19.762377953524879 2013-Feb-22 02:53:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300057 2013-Feb-22 02:53:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:53:03 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2013-Feb-22 02:53:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:53:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:53:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:53:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24784.00 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:53:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:53:14 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2013-Feb-22 02:53:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:53:14 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2013-Feb-22 02:53:14 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Feb-22 02:53:14 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:53:14 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:53:14 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:53:14 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:53:14 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:53:14 LOG2 antvel: Parameters to Doppler: Topocentric 24793 2013 53 0.0 2013-Feb-22 02:53:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:53:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:53:14 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:53:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:53:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:53:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:53:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Feb-22 02:53:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:53:14 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2013-Feb-22 02:53:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:53:15 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.593051 2013.1454354260145 18.999933 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333332 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 1 11.407457563880895 19.847268264219931 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 2 11.402672540143341 19.918416229635074 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 3 11.395207966739232 19.904785608072377 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 4 11.392544523265448 19.819117162678690 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 5 11.397360102573584 19.747880997928505 2013-Feb-22 02:53:15 LOG4 log_alfabeam: ALFABEAM 6 11.404808481099028 19.762401109492490 2013-Feb-22 02:53:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300058 2013-Feb-22 02:53:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:53:15 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2013-Feb-22 02:53:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:53:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:53:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:53:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24796.00 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:53:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:53:26 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2013-Feb-22 02:53:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:53:26 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2013-Feb-22 02:53:26 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Feb-22 02:53:26 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:53:26 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:53:26 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:53:26 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:53:26 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:53:26 LOG2 antvel: Parameters to Doppler: Topocentric 24806 2013 53 0.0 2013-Feb-22 02:53:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:53:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:53:26 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:53:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:53:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:53:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:53:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Feb-22 02:53:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:53:27 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2013-Feb-22 02:53:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:53:27 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.596672 2013.1454358379597 18.999933 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333332 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 1 11.407457153115331 19.847312279900514 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 2 11.402669988199872 19.918432456015182 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 3 11.395205831230399 19.904756655331123 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 4 11.392544941799905 19.819073838881657 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 5 11.397362567207317 19.747866120642648 2013-Feb-22 02:53:27 LOG4 log_alfabeam: ALFABEAM 6 11.404810533670515 19.762428394624951 2013-Feb-22 02:53:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300059 2013-Feb-22 02:53:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:53:27 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2013-Feb-22 02:53:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:53:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:53:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:53:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24808.00 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:53:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:53:38 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2013-Feb-22 02:53:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:53:38 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2013-Feb-22 02:53:38 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Feb-22 02:53:38 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:53:38 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:53:38 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:53:38 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:53:38 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:53:38 LOG2 antvel: Parameters to Doppler: Topocentric 24817 2013 53 0.0 2013-Feb-22 02:53:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:53:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:53:38 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:53:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:53:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:53:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:53:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Feb-22 02:53:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:53:38 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Feb-22 02:53:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:53:38 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.599736 2013.1454361865287 18.999933 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333304 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 1 11.407456805699585 19.847349396376792 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 2 11.402667835812656 19.918446127074905 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 3 11.395204031072101 19.904732230780969 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 4 11.392545295739632 19.819037304738583 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 5 11.397364646070802 19.747853584473766 2013-Feb-22 02:53:39 LOG4 log_alfabeam: ALFABEAM 6 11.404812264081011 19.762451415202669 2013-Feb-22 02:53:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300060 2013-Feb-22 02:53:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:53:39 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2013-Feb-22 02:53:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:53:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:53:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:53:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24820.00 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:53:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:53:50 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2013-Feb-22 02:53:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:53:50 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Feb-22 02:53:50 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2013-Feb-22 02:53:50 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2013-Feb-22 02:53:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Feb-22 02:53:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:53:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:53:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:53:50 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2013-Feb-22 02:53:50 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:53:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:53:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:53:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:53:50 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2013-Feb-22 02:53:51 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Feb-22 02:53:51 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Feb-22 02:53:51 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:53:51 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:53:51 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:53:51 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:53:51 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:53:51 LOG2 antvel: Parameters to Doppler: Topocentric 24830 2013 53 0.0 2013-Feb-22 02:53:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:53:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:53:51 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:53:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:53:51 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:53:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:53:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Feb-22 02:53:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:53:51 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2013-Feb-22 02:53:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:53:51 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.603357 2013.1454365984739 18.999933 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333332 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 1 11.407456395321690 19.847393109668790 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 2 11.402665300352238 19.918462213930603 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 3 11.395201911696317 19.904703453473843 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 4 11.392545713769273 19.818994275983783 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 5 11.397367095058764 19.747838830997775 2013-Feb-22 02:53:51 LOG4 log_alfabeam: ALFABEAM 6 11.404814301535028 19.762478541654520 2013-Feb-22 02:53:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300061 2013-Feb-22 02:53:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:53:52 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2013-Feb-22 02:53:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:53:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:53:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:53:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:53:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Feb-22 02:53:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24833.00 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:54:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:54:03 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2013-Feb-22 02:54:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:54:03 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2013-Feb-22 02:54:03 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Feb-22 02:54:03 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:54:03 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:54:03 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:54:03 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:54:03 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:54:03 LOG2 antvel: Parameters to Doppler: Topocentric 24843 2013 53 0.0 2013-Feb-22 02:54:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:54:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:54:03 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:54:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:54:03 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:54:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:54:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Feb-22 02:54:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:54:04 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Feb-22 02:54:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:54:04 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.606978 2013.1454370104191 18.999933 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333332 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 1 11.407455985154376 19.847436661300616 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 2 11.402662773705615 19.918478226231684 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 3 11.395199800943365 19.904674769993889 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 4 11.392546131525982 19.818951404960156 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 5 11.397369535681262 19.747824143680326 2013-Feb-22 02:54:04 LOG4 log_alfabeam: ALFABEAM 6 11.404816330908583 19.762505583245414 2013-Feb-22 02:54:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300062 2013-Feb-22 02:54:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:54:04 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2013-Feb-22 02:54:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:54:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:54:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Feb-22 02:54:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24845.00 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:54:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:54:15 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2013-Feb-22 02:54:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:54:15 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2013-Feb-22 02:54:15 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Feb-22 02:54:15 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:54:15 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:54:15 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:54:15 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:54:15 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:54:15 LOG2 antvel: Parameters to Doppler: Topocentric 24855 2013 53 0.0 2013-Feb-22 02:54:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:54:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:54:15 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:54:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:54:15 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:54:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:54:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Feb-22 02:54:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:54:15 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2013-Feb-22 02:54:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:54:16 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.610321 2013.1454373906761 18.999933 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 1 11.407455606664653 19.847476727040057 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 2 11.402660448796926 19.918492943620169 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 3 11.395197859828063 19.904648371250278 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 4 11.392546516967744 19.818911964117778 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 5 11.397371781565189 19.747810642166211 2013-Feb-22 02:54:16 LOG4 log_alfabeam: ALFABEAM 6 11.404818197369210 19.762530474050102 2013-Feb-22 02:54:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300063 2013-Feb-22 02:54:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:54:16 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Feb-22 02:54:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:54:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:54:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Feb-22 02:54:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24857.00 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:54:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:54:27 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Feb-22 02:54:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:54:27 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2013-Feb-22 02:54:27 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Feb-22 02:54:27 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:54:27 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:54:27 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:54:27 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:54:27 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:54:27 LOG2 antvel: Parameters to Doppler: Topocentric 24867 2013 53 0.0 2013-Feb-22 02:54:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:54:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:54:27 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:54:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:54:27 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:54:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:54:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Feb-22 02:54:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:54:28 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Feb-22 02:54:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:54:28 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.613663 2013.1454377709331 18.999933 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333321 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 1 11.407455228468075 19.847516645469895 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 2 11.402658131963616 19.918507594237283 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 3 11.395195926509253 19.904622058987457 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 4 11.392546902062405 19.818872667107520 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 5 11.397374019773459 19.747797200037216 2013-Feb-22 02:54:28 LOG4 log_alfabeam: ALFABEAM 6 11.404820056509038 19.762555286341474 2013-Feb-22 02:54:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300064 2013-Feb-22 02:54:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:54:28 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2013-Feb-22 02:54:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:54:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:54:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24869.00 2013-Feb-22 02:54:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:54:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:54:39 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2013-Feb-22 02:54:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:54:39 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2013-Feb-22 02:54:39 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Feb-22 02:54:39 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:54:39 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:54:39 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:54:39 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:54:39 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:54:39 LOG2 antvel: Parameters to Doppler: Topocentric 24878 2013 53 0.0 2013-Feb-22 02:54:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:54:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:54:39 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:54:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:54:39 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:54:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:54:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Feb-22 02:54:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:54:39 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2013-Feb-22 02:54:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:54:40 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.616727 2013.1454381195022 18.999933 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333329 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 1 11.407454881889528 19.847553125415416 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 2 11.402656014284711 19.918520971829782 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 3 11.395194160298013 19.904598003970793 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 4 11.392547254920153 19.818836754021618 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 5 11.397376065695688 19.747784924289274 2013-Feb-22 02:54:40 LOG4 log_alfabeam: ALFABEAM 6 11.404821755106569 19.762577972714073 2013-Feb-22 02:54:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300065 2013-Feb-22 02:54:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:54:40 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2013-Feb-22 02:54:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:54:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:54:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Feb-22 02:54:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24881.00 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:54:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:54:51 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2013-Feb-22 02:54:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:54:51 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2013-Feb-22 02:54:51 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Feb-22 02:54:51 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:54:51 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:54:51 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:54:51 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:54:51 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:54:51 LOG2 antvel: Parameters to Doppler: Topocentric 24891 2013 53 0.0 2013-Feb-22 02:54:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:54:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:54:51 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:54:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:54:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:54:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:54:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Feb-22 02:54:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:54:52 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2013-Feb-22 02:54:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:54:52 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.620348 2013.1454385314471 18.999933 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333329 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 1 11.407454472502295 19.847596092784993 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 2 11.402653519502568 19.918536714889594 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 3 11.395192080697322 19.904569659813870 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 4 11.392547671673123 19.818794453051900 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 5 11.397378476078213 19.747770475898715 2013-Feb-22 02:54:52 LOG4 log_alfabeam: ALFABEAM 6 11.404823755284653 19.762604707444073 2013-Feb-22 02:54:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300066 2013-Feb-22 02:54:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:54:52 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2013-Feb-22 02:54:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:54:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:54:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:54:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:54:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Feb-22 02:54:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24893.00 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:54:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:55:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:55:03 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2013-Feb-22 02:55:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:55:03 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2013-Feb-22 02:55:03 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Feb-22 02:55:03 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:55:03 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:55:03 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:55:03 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:55:03 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:55:03 LOG2 antvel: Parameters to Doppler: Topocentric 24903 2013 53 0.0 2013-Feb-22 02:55:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:55:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:55:03 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:55:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:55:03 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:55:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:55:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Feb-22 02:55:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:55:03 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Feb-22 02:55:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:55:04 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.623691 2013.1454389117043 18.999933 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333350 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 1 11.407454094733449 19.847635623822711 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 2 11.402651223759184 19.918551185952243 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 3 11.395190168087423 19.904543571690308 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 4 11.392548056189943 19.818755533904877 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 5 11.397380694285097 19.747757192978625 2013-Feb-22 02:55:04 LOG4 log_alfabeam: ALFABEAM 6 11.404825595029438 19.762629317358531 2013-Feb-22 02:55:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300067 2013-Feb-22 02:55:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:55:04 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Feb-22 02:55:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:55:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:55:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Feb-22 02:55:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24905.00 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:55:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:55:15 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Feb-22 02:55:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:55:15 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Feb-22 02:55:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Feb-22 02:55:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Feb-22 02:55:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Feb-22 02:55:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:55:15 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2013-Feb-22 02:55:15 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:55:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Feb-22 02:55:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:55:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:55:15 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2013-Feb-22 02:55:15 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Feb-22 02:55:15 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:55:16 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Feb-22 02:55:16 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:55:16 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:55:16 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:55:16 LOG2 antvel: Parameters to Doppler: Topocentric 24915 2013 53 0.0 2013-Feb-22 02:55:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:55:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Feb-22 02:55:16 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Feb-22 02:55:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:55:16 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:55:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:55:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Feb-22 02:55:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:55:16 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2013-Feb-22 02:55:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:55:16 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.627033 2013.1454392919613 18.999933 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333321 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 1 11.407453717258033 19.847675012174559 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 2 11.402648935842496 19.918565592445393 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 3 11.395188263023442 19.904517567436667 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 4 11.392548440361733 19.818716754075595 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 5 11.397382905053629 19.747743967492056 2013-Feb-22 02:55:16 LOG4 log_alfabeam: ALFABEAM 6 11.404827427687334 19.762653851133646 2013-Feb-22 02:55:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300068 2013-Feb-22 02:55:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:55:17 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2013-Feb-22 02:55:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:55:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Feb-22 02:55:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Feb-22 02:55:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24918.00 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:55:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:55:28 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2013-Feb-22 02:55:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:55:28 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2013-Feb-22 02:55:28 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Feb-22 02:55:28 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:55:28 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Feb-22 02:55:28 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:55:28 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:55:28 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:55:28 LOG2 antvel: Parameters to Doppler: Topocentric 24928 2013 53 0.0 2013-Feb-22 02:55:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:55:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Feb-22 02:55:28 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Feb-22 02:55:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:55:28 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:55:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:55:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Feb-22 02:55:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:55:29 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2013-Feb-22 02:55:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:55:29 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.630654 2013.1454397039065 18.999933 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333304 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 1 11.407453308473505 19.847717542359490 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 2 11.402646464913776 19.918581134250097 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 3 11.395186206721105 19.904489477403597 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 4 11.392548856346361 19.818674879649777 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 5 11.397385292802621 19.747729697703896 2013-Feb-22 02:55:29 LOG4 log_alfabeam: ALFABEAM 6 11.404829406027813 19.762680356089177 2013-Feb-22 02:55:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300069 2013-Feb-22 02:55:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:55:29 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2013-Feb-22 02:55:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:55:29 WARNING CIMA-warn_on_position: WARNING source 'galfasrc2' is setting in 10 minutes! 2013-Feb-22 02:55:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Feb-22 02:55:29 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 97.3620 17.3421 RA/Dec = 11:24:00 +19:50:00 2013-Feb-22 02:55:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Feb-22 02:55:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24930.00 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:31 LOG3 WAPP=3-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:55:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:55:40 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2013-Feb-22 02:55:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:55:40 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2013-Feb-22 02:55:40 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Feb-22 02:55:40 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:55:40 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Feb-22 02:55:40 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:55:40 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:55:40 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:55:40 LOG2 antvel: Parameters to Doppler: Topocentric 24940 2013 53 0.0 2013-Feb-22 02:55:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:55:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Feb-22 02:55:40 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Feb-22 02:55:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:55:40 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:55:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:55:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Feb-22 02:55:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:55:40 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2013-Feb-22 02:55:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:55:41 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.633996 2013.1454400841635 18.999933 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333329 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 1 11.407452931373999 19.847756661579538 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 2 11.402644191683956 19.918595416903997 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 3 11.395184315996580 19.904463629645647 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 4 11.392549240040740 19.818636362399420 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 5 11.397387489636403 19.747716582119626 2013-Feb-22 02:55:41 LOG4 log_alfabeam: ALFABEAM 6 11.404831225244582 19.762704748373885 2013-Feb-22 02:55:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300070 2013-Feb-22 02:55:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:55:41 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2013-Feb-22 02:55:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:55:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Feb-22 02:55:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Feb-22 02:55:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24942.00 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:55:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:55:52 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2013-Feb-22 02:55:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:55:52 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2013-Feb-22 02:55:52 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Feb-22 02:55:52 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:55:52 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Feb-22 02:55:52 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:55:52 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:55:52 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:55:52 LOG2 antvel: Parameters to Doppler: Topocentric 24952 2013 53 0.0 2013-Feb-22 02:55:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:55:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Feb-22 02:55:52 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Feb-22 02:55:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:55:52 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:55:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:55:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Feb-22 02:55:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:55:53 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2013-Feb-22 02:55:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:55:53 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.637339 2013.1454404644205 18.999933 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 19.833333333333321 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 1 11.407452554342107 19.847795664916546 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 2 11.402641924737814 19.918609645147345 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 3 11.395182431502867 19.904437848370055 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 4 11.392549623621559 19.818597958104530 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 5 11.397389680520742 19.747703514691672 2013-Feb-22 02:55:53 LOG4 log_alfabeam: ALFABEAM 6 11.404833038634598 19.762729080861742 2013-Feb-22 02:55:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300071 2013-Feb-22 02:55:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:55:53 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2013-Feb-22 02:55:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:55:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Feb-22 02:55:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:55:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:55:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Feb-22 02:55:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24954.00 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:56:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:56:04 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2013-Feb-22 02:56:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:56:04 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2013-Feb-22 02:56:04 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Feb-22 02:56:04 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:56:04 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Feb-22 02:56:04 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:56:04 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:56:04 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:56:04 LOG2 antvel: Parameters to Doppler: Topocentric 24963 2013 53 0.0 2013-Feb-22 02:56:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:56:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Feb-22 02:56:04 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Feb-22 02:56:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:56:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:56:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:56:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Feb-22 02:56:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:56:04 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2013-Feb-22 02:56:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:56:05 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.640403 2013.1454408129896 18.999933 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333332 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 1 11.407452208934975 19.847831301934523 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 2 11.402639853055332 19.918622634806560 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 3 11.395180710206885 19.904414283433141 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 4 11.392549974989436 19.818562867425118 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 5 11.397391682800864 19.747691583216394 2013-Feb-22 02:56:05 LOG4 log_alfabeam: ALFABEAM 6 11.404834695131548 19.762751324133028 2013-Feb-22 02:56:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300072 2013-Feb-22 02:56:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:56:05 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2013-Feb-22 02:56:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:56:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Feb-22 02:56:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Feb-22 02:56:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24966.00 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:56:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:56:16 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2013-Feb-22 02:56:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:56:16 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2013-Feb-22 02:56:16 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Feb-22 02:56:16 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:56:16 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Feb-22 02:56:16 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:56:16 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:56:16 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:56:16 LOG2 antvel: Parameters to Doppler: Topocentric 24976 2013 53 0.0 2013-Feb-22 02:56:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:56:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Feb-22 02:56:16 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Feb-22 02:56:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:56:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:56:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:56:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Feb-22 02:56:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:56:17 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2013-Feb-22 02:56:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:56:17 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.644024 2013.1454412249348 18.999933 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 19.833333333333332 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 1 11.407451800932044 19.847873281387272 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 2 11.402637412187516 19.918637923331826 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 3 11.395178683240017 19.904386513785251 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 4 11.392550389985935 19.818521530315699 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 5 11.397394042031044 19.747677538208755 2013-Feb-22 02:56:17 LOG4 log_alfabeam: ALFABEAM 6 11.404836645972486 19.762777539450230 2013-Feb-22 02:56:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300073 2013-Feb-22 02:56:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:56:17 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2013-Feb-22 02:56:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:56:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Feb-22 02:56:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:17 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24978.00 2013-Feb-22 02:56:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:56:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:56:28 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2013-Feb-22 02:56:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:56:28 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2013-Feb-22 02:56:28 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Feb-22 02:56:28 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:56:28 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Feb-22 02:56:28 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:56:28 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:56:28 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:56:28 LOG2 antvel: Parameters to Doppler: Topocentric 24987 2013 53 0.0 2013-Feb-22 02:56:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:56:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Feb-22 02:56:28 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Feb-22 02:56:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:56:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:56:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:56:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Feb-22 02:56:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Feb-22 02:56:28 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Feb-22 02:56:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:56:29 LOG5 log_alfabeam: Parameters: 11.4 19.833333333333332 12.647088 2013.1454415735036 18.999933 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 19.833333333333336 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 1 11.407451455855208 19.847908689220361 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 2 11.402635353017509 19.918650807645584 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 3 11.395176974148683 19.904363082233964 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 4 11.392550740938050 19.818486663235532 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 5 11.397396032441671 19.747665700227795 2013-Feb-22 02:56:29 LOG4 log_alfabeam: ALFABEAM 6 11.404838291027815 19.762799662148254 2013-Feb-22 02:56:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 305300074 2013-Feb-22 02:56:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Feb-22 02:56:29 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2013-Feb-22 02:56:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Feb-22 02:56:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Feb-22 02:56:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:29 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Feb-22 02:56:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24990.00 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1702.093142 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1889.579129 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1941.547157 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1995.428307 MHz 2013-Feb-22 02:56:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Feb-22 02:56:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Feb-22 02:56:40 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2013-Feb-22 02:56:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Feb-22 02:56:40 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Feb-22 02:56:40 INFO2 smartfreq: Switching off CAL 2013-Feb-22 02:56:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:56:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:56:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:56:40 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Feb-22 02:56:40 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:56:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:56:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:56:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:56:40 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Feb-22 02:56:40 INFO3 restore_frequencies: Restoring original frequencies 2013-Feb-22 02:56:40 LOG5 antvel: Calling 'antvel 112400.000000 195000.000000 J Topocentric 0' 2013-Feb-22 02:56:40 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:56:41 LOG2 antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:56:41 LOG2 antvel: Parameters to Doppler: Topocentric 25000 2013 53 0.0 2013-Feb-22 02:56:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:56:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Feb-22 02:56:41 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Feb-22 02:56:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 02:56:41 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 02:56:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:56:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:41 STOP finish_task: Finishing task 'smart frequency switching' 2013-Feb-22 02:56:41 LOG5 finish_task: Level: (2) ID = <10248> Status = 0 0 0 0 ok 2013-Feb-22 02:56:41 DONE finish_task: DONE finished pattern: smart frequency switching 2013-Feb-22 02:56:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:56:41 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2013-Feb-22 02:56:41 LOG5 end_task: Level: (2) ID = <10248> Status = 0 0 0 0 ok 2013-Feb-22 02:56:41 COMMAND run_command_line: EXECUTING command 86: 'LOAD ages_mock_cima33.conf' 2013-Feb-22 02:56:41 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Feb-22 02:56:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Feb-22 02:56:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:56:41 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Feb-22 02:56:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:41 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2013-Feb-22 02:56:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2013-Feb-22 02:56:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:41 LOG2 CIMA-antvel: Precessing RA = 11:24:00.0 Dec = +19:50:00.0 Epoch = 2013.14544 J 2013-Feb-22 02:56:41 LOG2 CIMA-antvel: Computed apparent RA = 11:24:43.5 Dec = +19:45:23.9 2013-Feb-22 02:56:41 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 25001 2013 53 0.0 2013-Feb-22 02:56:41 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Feb-22 02:56:42 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2013-Feb-22 02:56:43 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2013-Feb-22 02:56:44 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2013-Feb-22 02:56:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2013-Feb-22 02:56:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2013-Feb-22 02:56:46 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2013-Feb-22 02:56:46 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:56:46 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Feb-22 02:56:46 LOG5 begin_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2013-Feb-22 02:56:46 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Feb-22 02:56:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Feb-22 02:56:46 LOG1 config_iflo: Receiver ALFA already selected 2013-Feb-22 02:56:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 02:56:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:56:46 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 02:56:46 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2013-Feb-22 02:56:46 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 02:56:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 02:56:46 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2013-Feb-22 02:56:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 02:56:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 02:56:46 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Feb-22 02:56:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Feb-22 02:56:46 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Feb-22 02:56:46 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Feb-22 02:56:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:46 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Feb-22 02:56:47 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Feb-22 02:56:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Feb-22 02:56:47 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Feb-22 02:56:47 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Feb-22 02:56:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Feb-22 02:56:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:56:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Feb-22 02:56:47 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:47 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:56:47 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Feb-22 02:56:47 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2013-Feb-22 02:56:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Feb-22 02:56:47 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Feb-22 02:56:47 LOG5 finish_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2013-Feb-22 02:56:47 DONE finish_task: DONE finished configuration: IF/LO path 2013-Feb-22 02:56:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:56:47 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Feb-22 02:56:47 LOG5 end_task: Level: (2) ID = <10318> Status = 0 0 0 0 ok 2013-Feb-22 02:56:47 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Feb-22 02:56:47 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2013-Feb-22 02:56:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Feb-22 02:56:47 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Feb-22 02:56:47 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 02:56:47 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 02:56:47 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Feb-22 02:56:47 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 02:56:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 02:56:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:56:47 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 02:56:47 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2013-Feb-22 02:56:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:48 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 02:56:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:56:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:48 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:56:48 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 02:56:48 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2013-Feb-22 02:56:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 02:56:48 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 02:56:48 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2013-Feb-22 02:56:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:56:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:56:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:56:48 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2013-Feb-22 02:56:48 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:56:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:56:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:56:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:56:48 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:56:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:56:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:56:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel Cabrera 2013-Feb-22 02:56:49 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 02:56:49 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 02:56:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:56:49 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Feb-22 02:56:49 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:56:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Feb-22 02:56:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:56:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel Cabrera' 2013-Feb-22 02:56:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:56:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:56:49 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Feb-22 02:56:49 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Feb-22 02:56:49 LOG5 finish_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Feb-22 02:56:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:56:49 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Feb-22 02:56:49 LOG5 end_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2013-Feb-22 02:56:49 LOG5 begin_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2013-Feb-22 02:56:49 INFO1 config_mock: Starting to configure the Mock spectrometer 2013-Feb-22 02:56:49 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Feb-22 02:56:49 START begin_task: Starting task 'selecting calibration port' 2013-Feb-22 02:56:49 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 LOG3 vw_send: To DATATAKING: calport 3 2013-Feb-22 02:56:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Feb-22 02:56:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:56:49 START begin_task: Starting task 'waiting on calport' 2013-Feb-22 02:56:49 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2013-Feb-22 02:56:49 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Feb-22 02:56:50 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Feb-22 02:56:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 02:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:50 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 02:56:50 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Feb-22 02:56:50 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Feb-22 02:56:50 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Feb-22 02:56:50 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Feb-22 02:56:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Feb-22 02:56:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:56:50 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:56:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:56:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:56:50 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Feb-22 02:56:50 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Feb-22 02:56:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Feb-22 02:56:50 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG3 CALCONTROL-caltrig: Software trigger 2013-Feb-22 02:56:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Feb-22 02:56:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Feb-22 02:56:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Feb-22 02:56:50 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2013-Feb-22 02:56:50 LOG3 socket_wait: To MOCK: NOP 2013-Feb-22 02:56:50 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2013-Feb-22 02:56:50 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2013-Feb-22 02:56:50 LOG4 from_mock: From MOCK: nop ok 2013-Feb-22 02:56:51 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2013-Feb-22 02:56:51 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2013-Feb-22 02:56:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:0 k:a rf:1 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:1 k:b rf:5 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:2 k:c rf:2 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:3 k:d rf:6 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:4 k:e rf:3 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:5 k:f rf:7 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: PhilDbg:config_mock b:6 k:g rf:4 flip:-1 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2013-Feb-22 02:56:51 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2013-Feb-22 02:56:51 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2013-Feb-22 02:56:51 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2013-Feb-22 02:56:51 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2013-Feb-22 02:56:51 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Feb-22 02:56:51 LOG4 from_mock: From MOCK: confok 2013-Feb-22 02:56:51 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2013-Feb-22 02:56:51 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Feb-22 02:56:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2013-Feb-22 02:56:51 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2013-Feb-22 02:56:51 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2013-Feb-22 02:56:51 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2013-Feb-22 02:56:51 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Feb-22 02:56:52 LOG4 from_mock: From MOCK: confok 2013-Feb-22 02:56:52 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2013-Feb-22 02:56:52 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2013-Feb-22 02:56:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2013-Feb-22 02:56:52 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2013-Feb-22 02:56:52 LOG5 finish_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2013-Feb-22 02:56:52 DONE finish_task: DONE finished configuring: the Mock spectrometer 2013-Feb-22 02:56:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Feb-22 02:56:52 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2013-Feb-22 02:56:52 LOG5 end_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2013-Feb-22 02:56:52 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Feb-22 02:56:52 COMMAND run_command_line: EXECUTING command 87: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2013-Feb-22 02:56:52 COMMAND run_command_line: EXECUTING command 88: 'CATALOG AGESFull.cat' 2013-Feb-22 02:56:52 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Feb-22 02:56:52 COMMAND run_command_line: EXECUTING command 91: 'IF LSTSLEW(NGC5523_p2_019) < 132436 THEN' 2013-Feb-22 02:56:54 LOG3 is_if_valid: Current source data: rising 246.5 22.4 13 - - 170 6.2 2013-Feb-22 02:56:54 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p2_019) < 132436 2013-Feb-22 02:56:54 INFO5 is_if_valid: Condition parsed as: 12.757106333333333 < 13.41 2013-Feb-22 02:56:54 COMMAND run_command_line: EXECUTING command 92: 'FIXEDDRIFT az=232.93 alfaangle=-34.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_019 ra=141000.00 dec=255300.00' 2013-Feb-22 02:56:54 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 02:56:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 02:56:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 232.93 -34.1 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p2_019 141000.00 255300.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:56:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 02:56:54 LOG5 begin_task: Level: (2) ID = <10334> Status = 0 0 0 0 ok 2013-Feb-22 02:56:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2013-Feb-22 02:56:54 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 02:56:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p2_019} 2013-Feb-22 02:56:54 INFO3 fixed_driftmap: Sending telescope to Az = 232.93 and ZA = 13.00 2013-Feb-22 02:56:54 LOG3 track_source: Calling 'track_source NGC5523_p2_019 232.93 12.9985320268 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 02:56:54 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 02:56:54 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2013-Feb-22 02:56:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_019} INFO {Slewing to source 'NGC5523_p2_019' ...} 2013-Feb-22 02:56:54 INFO1 track_source: Starting to track NGC5523_p2_019 2013-Feb-22 02:56:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_019" 2013-Feb-22 02:56:54 LOG3 vw_send: To DATATAKING: set ra 232.93 2013-Feb-22 02:56:54 LOG3 vw_send: To DATATAKING: set dec 12.9985320268 2013-Feb-22 02:56:55 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 02:56:55 LOG3 vw_send: To DATATAKING: pnt tr 232.93 12.9985320268 -CF 2013-Feb-22 02:56:55 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:56:55 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 02:56:55 LOG5 finish_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2013-Feb-22 02:56:55 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 02:56:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:56:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 02:56:55 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2013-Feb-22 02:56:55 START begin_task: Starting task 'rotate ALFA to -34.1 degrees' 2013-Feb-22 02:56:55 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2013-Feb-22 02:56:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -34.1 degrees ...} 2013-Feb-22 02:56:55 INFO2 rotate_alfa: ALFA commanded to -34.1 degrees 2013-Feb-22 02:56:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION -34.1 REPLY 2013-Feb-22 02:56:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 02:56:55 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 02:56:55 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_019" 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: set ra 232.93 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% 232.93 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: set dec 12.9985320268 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: 12.9985320268 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: pnt tr 232.93 12.9985320268 -CF 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 02:57:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 02:57:26 INFO3 alfa_motor: ALFA rotator in-position -34.10 degrees 2013-Feb-22 02:57:26 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 02:57:26 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2013-Feb-22 02:57:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 02:57:26 STOP finish_task: Finishing task 'rotate ALFA to -34.1 degrees' 2013-Feb-22 02:57:26 LOG5 finish_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2013-Feb-22 02:57:26 INFO2 finish_task: DONE finished configuration: rotating ALFA to -34.1 degrees 2013-Feb-22 02:57:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 02:57:26 STOP end_task: Finishing task 'rotate ALFA to -34.1 degrees' with status 'OK' 2013-Feb-22 02:57:26 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2013-Feb-22 02:57:26 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 02:57:26 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2013-Feb-22 02:57:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 02:57:26 LOG3 waittrk: Start waittrk 5 2013-Feb-22 02:57:26 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 02:57:26 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Feb-22 02:57:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 02:57:31 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Feb-22 02:57:31 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 02:57:31 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2013-Feb-22 03:02:35 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 03:02:35 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2013-Feb-22 03:02:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:02:35 INFO2 waittrk: Now tracking NGC5523_p2_019 2013-Feb-22 03:02:35 LOG4 waittrk: Current telescope position: Az = 232.49 ZA = 13.01 2013-Feb-22 03:02:35 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 03:02:35 LOG5 finish_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2013-Feb-22 03:02:35 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 03:02:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:02:35 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 03:02:35 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2013-Feb-22 03:02:35 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 03:02:35 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2013-Feb-22 03:02:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 03:02:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 03:02:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:02:36 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 03:02:36 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 03:02:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:02:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:02:36 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 03:02:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 03:02:36 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 03:02:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 03:02:36 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 03:02:36 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 03:02:36 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 03:02:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 03:02:36 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 03:02:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 03:02:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 03:02:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 03:02:36 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 03:02:36 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:02:36 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 03:02:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 03:02:36 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 03:02:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 03:02:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 03:02:36 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2013-Feb-22 03:02:36 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 03:02:36 INFO2 astwait: Waiting for 2311 seconds from 07:02:36 to 07:41:07 UTC ... 2013-Feb-22 03:02:36 LOG4 send_obs_status: To obs_status: <1> TASKTIME 2311 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 03:02:37 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 03:02:37 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2013-Feb-22 03:41:07 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 03:41:07 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2013-Feb-22 03:41:07 INFO3 astwait: Finished waiting 2013-Feb-22 03:41:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:41:07 LOG5 dopset_later: Calling 'dopset_later 61.177677815053997' 2013-Feb-22 03:41:07 INFO3 dopset_later: Setting Doppler correction for 03:42:07 (61.2 seconds from now) 2013-Feb-22 03:41:07 LOG5 antvel: Calling 'antvel 232.930000 12.998532 F Heliocentric 61.177677815053997' 2013-Feb-22 03:41:07 LOG2 antvel: Transforming current Az = 232.93 ZA = 13.00 to apparent RA = 14:10:37.0 Dec = +25:49:01.9 2013-Feb-22 03:41:07 LOG2 antvel: Parameters to Doppler: Heliocentric 27727 2013 53 0.0 2013-Feb-22 03:41:07 INFO5 antvel: Computed antenna velocity: -17.70144 km/s 2013-Feb-22 03:41:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.7014376855 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 03:41:07 INFO4 dopset_gen: New sky frequencies: 1381.324990 1381.324990 1381.324990 1381.324990 1381.324990 1381.324990 1381.324990 1381.324990 1381.324990 2013-Feb-22 03:41:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.324990 sky0=1381.324990 sky1=1381.324990 sky2=1381.324990 sky3=1381.324990 sky4=1381.324990 sky5=1381.324990 sky6=1381.324990 sky7=1381.324990 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 03:41:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.324990 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631324990.0} 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 03:41:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 03:41:07 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 03:41:07 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:03.0 Dec = +25:52:44.5 2013-Feb-22 03:41:07 LOG3 track_source: Calling 'track_source NGC5523_p2_019 140903.0 255244.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 03:41:07 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 03:41:07 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2013-Feb-22 03:41:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_019} INFO {Slewing to source 'NGC5523_p2_019' ...} 2013-Feb-22 03:41:07 INFO1 track_source: Starting to track NGC5523_p2_019 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_019" 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: set ra 140903.0 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: set dec 255244.5 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: pnt tr 140903.0 255244.5 -CJ 2013-Feb-22 03:41:07 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:41:07 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 03:41:08 LOG5 finish_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2013-Feb-22 03:41:08 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 03:41:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:41:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 03:41:08 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2013-Feb-22 03:41:08 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 03:41:08 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2013-Feb-22 03:41:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 03:41:08 LOG3 waittrk: Start waittrk 5 2013-Feb-22 03:41:08 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 03:41:08 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631324990.0} 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_019" 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: set ra 140903.0 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: set dec 255244.5 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: pnt tr 140903.0 255244.5 -CJ 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 140903.0 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: vw% 255244.5 2013-Feb-22 03:41:08 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2013-Feb-22 03:41:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 03:41:13 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2013-Feb-22 03:41:13 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 03:41:13 LOG5 begin_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2013-Feb-22 03:41:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 03:41:15 LOG5 end_task: Level: (4) ID = <10349> Status = 0 0 0 0 ok 2013-Feb-22 03:41:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:41:15 INFO2 waittrk: Now tracking NGC5523_p2_019 2013-Feb-22 03:41:15 LOG4 waittrk: Current telescope position: Az = 232.46 ZA = 12.99 2013-Feb-22 03:41:15 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 03:41:15 LOG5 finish_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2013-Feb-22 03:41:15 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 03:41:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:41:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 03:41:15 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2013-Feb-22 03:41:15 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 03:41:15 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2013-Feb-22 03:41:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 03:41:15 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 03:41:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 03:41:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 03:41:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:41:16 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 03:41:16 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2013-Feb-22 03:41:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 03:41:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:41:18 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:41:18 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 03:41:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 03:41:18 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2013-Feb-22 03:41:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 03:41:18 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 03:41:18 LOG5 begin_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2013-Feb-22 03:41:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 03:41:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:41:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:41:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:41:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:41:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 03:41:19 LOG5 begin_task: Level: (5) ID = <10353> Status = 0 0 0 0 ok 2013-Feb-22 03:41:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 03:41:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:41:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 03:41:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 5 dB --- beam 3: 5 3 dB 2013-Feb-22 03:41:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 9 7 dB 2013-Feb-22 03:41:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 4 dB --- beam 7: 10 5 dB 2013-Feb-22 03:41:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 03:41:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 03:41:19 LOG5 end_task: Level: (5) ID = <10353> Status = 0 0 0 0 ok 2013-Feb-22 03:41:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.021 0.922 ALFA beam 1: 1.005 0.904 2013-Feb-22 03:41:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.910 1.072 ALFA beam 3: 0.999 1.042 2013-Feb-22 03:41:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.963 0.951 ALFA beam 5: 0.944 0.919 2013-Feb-22 03:41:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.890 1.050 ALFA beam 7: 0.988 0.994 2013-Feb-22 03:41:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 03:41:19 LOG5 finish_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2013-Feb-22 03:41:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 03:41:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:41:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 03:41:19 LOG5 end_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2013-Feb-22 03:41:19 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 03:41:19 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2013-Feb-22 03:41:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 03:41:19 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 03:41:20 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 03:41:20 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 03:41:20 LOG5 begin_task: Level: (5) ID = <10355> Status = 0 0 0 0 ok 2013-Feb-22 03:41:23 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 03:41:23 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 03:41:23 LOG5 task_failed: Level: (5) ID = <10355> Status = 0 0 0 0 ok 2013-Feb-22 03:41:23 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 03:41:23 LOG5 end_task: Level: (5) ID = <10355> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 03:41:23 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 03:41:23 LOG5 finish_task: Level: (4) ID = <10354> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 03:41:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 03:41:23 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 03:41:23 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 03:41:23 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 03:41:23 LOG5 finish_task: Level: (3) ID = <10350> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 03:41:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 03:41:23 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 03:41:23 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 03:41:23 LOG5 finish_task: Level: (2) ID = <10334> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 03:41:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 03:41:23 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 03:41:23 LOG5 end_task: Level: (2) ID = <10334> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 ALERT run_command_file: Stopping command file processing at line 92! 2013-Feb-22 03:41:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 03:41:23 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 03:41:23 LOG5 finish_task: Level: (1) ID = <10232> Status = 0 0 0 1 failed 2013-Feb-22 03:41:23 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 03:41:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 03:41:23 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 03:41:24 LOG5 end_task: Level: (1) ID = <10232> Status = 0 0 0 1 failed 2013-Feb-22 03:41:43 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 03:41:43 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 95 1 56 2013-Feb-22 03:41:43 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 95 1 56' 2013-Feb-22 03:41:43 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 03:41:43 LOG5 begin_task: Level: (1) ID = <10356> Status = 0 0 0 0 ok 2013-Feb-22 03:41:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 03:41:43 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 95 2013-Feb-22 03:41:43 COMMAND run_command_line: EXECUTING command 95: 'ENDIF' 2013-Feb-22 03:41:43 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2013-Feb-22 03:41:43 LOG1 task_failed: Task 'running command file '130222.cmd'' failed! 2013-Feb-22 03:41:43 LOG5 task_failed: Level: (1) ID = <10356> Status = 0 0 0 0 ok 2013-Feb-22 03:41:43 ALERT run_command_file: Stopping command file processing at line 95! 2013-Feb-22 03:41:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 03:41:43 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 03:41:43 LOG5 finish_task: Level: (1) ID = <10356> Status = 0 0 0 1 failed 2013-Feb-22 03:41:43 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 03:41:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 03:41:43 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 03:41:43 LOG5 end_task: Level: (1) ID = <10356> Status = 0 0 0 1 failed 2013-Feb-22 03:41:47 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 03:41:47 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 96 1 56 2013-Feb-22 03:41:47 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 96 1 56' 2013-Feb-22 03:41:47 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 03:41:47 LOG5 begin_task: Level: (1) ID = <10357> Status = 0 0 0 0 ok 2013-Feb-22 03:41:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 03:41:47 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 96 2013-Feb-22 03:41:47 COMMAND run_command_line: EXECUTING command 98: 'IF LSTSLEW(NGC5523_p2_021) < 133606 THEN' 2013-Feb-22 03:41:49 LOG3 is_if_valid: Current source data: up 233.3 13.0 UP - - 125 0.1 2013-Feb-22 03:41:49 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p2_021) < 133606 2013-Feb-22 03:41:49 INFO5 is_if_valid: Condition parsed as: 13.406099666666666 < 13.601666666666667 2013-Feb-22 03:41:49 COMMAND run_command_line: EXECUTING command 99: 'FIXEDDRIFT az=225.60 alfaangle=-25.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_021 ra=141000.00 dec=255000.00' 2013-Feb-22 03:41:49 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 03:41:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 03:41:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 225.60 -25.4 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p2_021 141000.00 255000.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 03:41:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 03:41:49 LOG5 begin_task: Level: (2) ID = <10358> Status = 0 0 0 0 ok 2013-Feb-22 03:41:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC5523_p2_019' 2013-Feb-22 03:41:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 03:41:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p2_021} 2013-Feb-22 03:41:49 INFO3 fixed_driftmap: Sending telescope to Az = 225.60 and ZA = 10.89 2013-Feb-22 03:41:49 LOG3 track_source: Calling 'track_source NGC5523_p2_021 225.60 10.8941831088 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 03:41:49 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 03:41:49 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2013-Feb-22 03:41:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_021} INFO {Slewing to source 'NGC5523_p2_021' ...} 2013-Feb-22 03:41:49 INFO1 track_source: Starting to track NGC5523_p2_021 2013-Feb-22 03:41:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_021" 2013-Feb-22 03:41:49 LOG3 vw_send: To DATATAKING: set ra 225.60 2013-Feb-22 03:41:49 LOG3 vw_send: To DATATAKING: set dec 10.8941831088 2013-Feb-22 03:41:49 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 03:41:49 LOG3 vw_send: To DATATAKING: pnt tr 225.60 10.8941831088 -CF 2013-Feb-22 03:41:50 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:41:50 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 03:41:50 LOG5 finish_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2013-Feb-22 03:41:50 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 03:41:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:41:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 03:41:50 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2013-Feb-22 03:41:50 START begin_task: Starting task 'rotate ALFA to -25.4 degrees' 2013-Feb-22 03:41:50 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2013-Feb-22 03:41:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -25.4 degrees ...} 2013-Feb-22 03:41:50 INFO2 rotate_alfa: ALFA commanded to -25.4 degrees 2013-Feb-22 03:41:50 LOG3 sock_errsend: To ALFAMOTOR: POSITION -25.4 REPLY 2013-Feb-22 03:41:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 03:41:50 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 03:41:50 LOG5 begin_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_021" 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: set ra 225.60 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: vw% 225.60 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: set dec 10.8941831088 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: 10.8941831088 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: pnt tr 225.60 10.8941831088 -CF 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:41:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 03:41:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 03:41:56 INFO3 alfa_motor: ALFA rotator in-position -25.40 degrees 2013-Feb-22 03:41:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 03:41:56 LOG5 end_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2013-Feb-22 03:41:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:41:56 STOP finish_task: Finishing task 'rotate ALFA to -25.4 degrees' 2013-Feb-22 03:41:56 LOG5 finish_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2013-Feb-22 03:41:56 INFO2 finish_task: DONE finished configuration: rotating ALFA to -25.4 degrees 2013-Feb-22 03:41:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:41:56 STOP end_task: Finishing task 'rotate ALFA to -25.4 degrees' with status 'OK' 2013-Feb-22 03:41:56 LOG5 end_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2013-Feb-22 03:41:56 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 03:41:56 LOG5 begin_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2013-Feb-22 03:41:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 03:41:56 LOG3 waittrk: Start waittrk 5 2013-Feb-22 03:41:56 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 03:41:56 LOG5 begin_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2013-Feb-22 03:42:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 03:42:01 LOG5 end_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2013-Feb-22 03:42:01 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 03:42:01 LOG5 begin_task: Level: (4) ID = <10364> Status = 0 0 0 0 ok 2013-Feb-22 03:42:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 03:42:47 LOG5 end_task: Level: (4) ID = <10364> Status = 0 0 0 0 ok 2013-Feb-22 03:42:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:42:47 INFO2 waittrk: Now tracking NGC5523_p2_021 2013-Feb-22 03:42:47 LOG4 waittrk: Current telescope position: Az = 225.19 ZA = 10.91 2013-Feb-22 03:42:47 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 03:42:47 LOG5 finish_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2013-Feb-22 03:42:47 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 03:42:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:42:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 03:42:47 LOG5 end_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2013-Feb-22 03:42:47 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 03:42:47 LOG5 begin_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2013-Feb-22 03:42:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 03:42:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 03:42:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:42:47 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 03:42:47 LOG5 begin_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2013-Feb-22 03:42:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 03:42:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:42:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:42:47 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 03:42:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 03:42:47 LOG5 end_task: Level: (4) ID = <10366> Status = 0 0 0 0 ok 2013-Feb-22 03:42:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 03:42:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 03:42:48 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 03:42:48 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 03:42:48 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2013-Feb-22 03:42:48 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 03:42:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 03:42:48 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2013-Feb-22 03:42:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 03:42:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 03:42:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 03:42:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 03:42:48 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 03:42:48 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2013-Feb-22 03:42:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:42:48 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 03:42:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 03:42:48 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2013-Feb-22 03:42:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 03:42:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 03:42:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 03:42:48 LOG5 end_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2013-Feb-22 03:42:48 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 03:42:48 INFO2 astwait: Waiting for 588 seconds from 07:42:48 to 07:52:36 UTC ... 2013-Feb-22 03:42:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 588 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 03:42:48 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 03:42:48 LOG5 begin_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2013-Feb-22 03:52:36 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 03:52:36 LOG5 end_task: Level: (3) ID = <10369> Status = 0 0 0 0 ok 2013-Feb-22 03:52:36 INFO3 astwait: Finished waiting 2013-Feb-22 03:52:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:52:36 LOG5 dopset_later: Calling 'dopset_later 60.654858868236772' 2013-Feb-22 03:52:36 INFO3 dopset_later: Setting Doppler correction for 03:53:36 (60.7 seconds from now) 2013-Feb-22 03:52:36 LOG5 antvel: Calling 'antvel 225.600000 10.894183 F Heliocentric 60.654858868236772' 2013-Feb-22 03:52:36 LOG2 antvel: Transforming current Az = 225.60 ZA = 10.89 to apparent RA = 14:10:37.0 Dec = +25:46:02.0 2013-Feb-22 03:52:36 LOG2 antvel: Parameters to Doppler: Heliocentric 28416 2013 53 0.0 2013-Feb-22 03:52:36 INFO5 antvel: Computed antenna velocity: -17.69725 km/s 2013-Feb-22 03:52:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.6972543559 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 03:52:36 INFO4 dopset_gen: New sky frequencies: 1381.324970 1381.324970 1381.324970 1381.324970 1381.324970 1381.324970 1381.324970 1381.324970 1381.324970 2013-Feb-22 03:52:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.324970 sky0=1381.324970 sky1=1381.324970 sky2=1381.324970 sky3=1381.324970 sky4=1381.324970 sky5=1381.324970 sky6=1381.324970 sky7=1381.324970 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 03:52:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.324970 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631324970.0} 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 03:52:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 03:52:36 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 03:52:36 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:03.5 Dec = +25:49:44.6 2013-Feb-22 03:52:36 LOG3 track_source: Calling 'track_source NGC5523_p2_021 140903.5 254944.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 03:52:36 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 03:52:36 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2013-Feb-22 03:52:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_021} INFO {Slewing to source 'NGC5523_p2_021' ...} 2013-Feb-22 03:52:36 INFO1 track_source: Starting to track NGC5523_p2_021 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_021" 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: set ra 140903.5 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: set dec 254944.6 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: pnt tr 140903.5 254944.6 -CJ 2013-Feb-22 03:52:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:52:36 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 03:52:36 LOG5 finish_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2013-Feb-22 03:52:36 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 03:52:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:52:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 03:52:37 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2013-Feb-22 03:52:37 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 03:52:37 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2013-Feb-22 03:52:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 03:52:37 LOG3 waittrk: Start waittrk 5 2013-Feb-22 03:52:37 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 03:52:37 LOG5 begin_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631324970.0} 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_021" 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: set ra 140903.5 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% 140903.5 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: set dec 254944.6 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: 254944.6 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: pnt tr 140903.5 254944.6 -CJ 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:52:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 03:52:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 03:52:42 LOG5 end_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2013-Feb-22 03:52:42 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 03:52:42 LOG5 begin_task: Level: (4) ID = <10373> Status = 0 0 0 0 ok 2013-Feb-22 03:52:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 03:52:43 LOG5 end_task: Level: (4) ID = <10373> Status = 0 0 0 0 ok 2013-Feb-22 03:52:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:52:43 INFO2 waittrk: Now tracking NGC5523_p2_021 2013-Feb-22 03:52:43 LOG4 waittrk: Current telescope position: Az = 225.15 ZA = 10.89 2013-Feb-22 03:52:43 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 03:52:43 LOG5 finish_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2013-Feb-22 03:52:43 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 03:52:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:52:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 03:52:43 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2013-Feb-22 03:52:43 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 03:52:43 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2013-Feb-22 03:52:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 03:52:43 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 03:52:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 03:52:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 03:52:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:52:43 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 03:52:44 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2013-Feb-22 03:52:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 03:52:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:46 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 03:52:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 03:52:46 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2013-Feb-22 03:52:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 03:52:46 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 03:52:46 LOG5 begin_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2013-Feb-22 03:52:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 03:52:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:52:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:52:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:52:47 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 03:52:47 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 03:52:47 LOG5 begin_task: Level: (5) ID = <10377> Status = 0 0 0 0 ok 2013-Feb-22 03:52:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 03:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:52:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 03:52:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 5 dB --- beam 3: 5 3 dB 2013-Feb-22 03:52:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 9 7 dB 2013-Feb-22 03:52:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 10 5 dB 2013-Feb-22 03:52:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 03:52:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 03:52:47 LOG5 end_task: Level: (5) ID = <10377> Status = 0 0 0 0 ok 2013-Feb-22 03:52:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.026 0.925 ALFA beam 1: 1.015 0.914 2013-Feb-22 03:52:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.907 1.073 ALFA beam 3: 0.994 1.055 2013-Feb-22 03:52:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.952 0.939 ALFA beam 5: 0.934 0.904 2013-Feb-22 03:52:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.101 1.033 ALFA beam 7: 0.970 0.976 2013-Feb-22 03:52:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 03:52:47 LOG5 finish_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2013-Feb-22 03:52:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 03:52:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:52:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 03:52:47 LOG5 end_task: Level: (4) ID = <10376> Status = 0 0 0 0 ok 2013-Feb-22 03:52:48 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 03:52:48 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2013-Feb-22 03:52:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 03:52:48 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 03:52:48 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 03:52:48 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 03:52:48 LOG5 begin_task: Level: (5) ID = <10379> Status = 0 0 0 0 ok 2013-Feb-22 03:52:51 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 03:52:51 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 03:52:51 LOG5 task_failed: Level: (5) ID = <10379> Status = 0 0 0 0 ok 2013-Feb-22 03:52:51 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 03:52:51 LOG5 end_task: Level: (5) ID = <10379> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 03:52:51 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 03:52:51 LOG5 finish_task: Level: (4) ID = <10378> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 03:52:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 03:52:51 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 03:52:51 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 03:52:51 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 03:52:51 LOG5 finish_task: Level: (3) ID = <10374> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 03:52:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 03:52:51 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 03:52:51 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 03:52:51 LOG5 finish_task: Level: (2) ID = <10358> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 03:52:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 03:52:51 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 03:52:51 LOG5 end_task: Level: (2) ID = <10358> Status = 0 0 0 1 failed 2013-Feb-22 03:52:51 ALERT run_command_file: Stopping command file processing at line 99! 2013-Feb-22 03:52:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 03:52:52 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 03:52:52 LOG5 finish_task: Level: (1) ID = <10357> Status = 0 0 0 1 failed 2013-Feb-22 03:52:52 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 03:52:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 03:52:52 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 03:52:52 LOG5 end_task: Level: (1) ID = <10357> Status = 0 0 0 1 failed 2013-Feb-22 03:53:23 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 03:53:23 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 102 1 56 2013-Feb-22 03:53:23 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 102 1 56' 2013-Feb-22 03:53:23 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 03:53:23 LOG5 begin_task: Level: (1) ID = <10380> Status = 0 0 0 0 ok 2013-Feb-22 03:53:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 03:53:23 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 102 2013-Feb-22 03:53:23 COMMAND run_command_line: EXECUTING command 102: 'ENDIF' 2013-Feb-22 03:53:23 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2013-Feb-22 03:53:23 LOG1 task_failed: Task 'running command file '130222.cmd'' failed! 2013-Feb-22 03:53:23 LOG5 task_failed: Level: (1) ID = <10380> Status = 0 0 0 0 ok 2013-Feb-22 03:53:23 ALERT run_command_file: Stopping command file processing at line 102! 2013-Feb-22 03:53:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 03:53:23 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 03:53:23 LOG5 finish_task: Level: (1) ID = <10380> Status = 0 0 0 1 failed 2013-Feb-22 03:53:24 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 03:53:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 03:53:24 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 03:53:24 LOG5 end_task: Level: (1) ID = <10380> Status = 0 0 0 1 failed 2013-Feb-22 03:53:29 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 03:53:29 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 103 1 56 2013-Feb-22 03:53:29 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 103 1 56' 2013-Feb-22 03:53:29 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 03:53:29 LOG5 begin_task: Level: (1) ID = <10381> Status = 0 0 0 0 ok 2013-Feb-22 03:53:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 03:53:29 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 103 2013-Feb-22 03:53:29 COMMAND run_command_line: EXECUTING command 105: 'IF LSTSLEW(NGC5523_p2_023) < 134736 THEN' 2013-Feb-22 03:53:31 LOG3 is_if_valid: Current source data: up 225.9 10.9 UP - - 113 0.1 2013-Feb-22 03:53:31 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p2_023) < 134736 2013-Feb-22 03:53:31 INFO5 is_if_valid: Condition parsed as: 13.601633666666666 < 13.793333333333333 2013-Feb-22 03:53:31 COMMAND run_command_line: EXECUTING command 106: 'FIXEDDRIFT az=214.86 alfaangle=-13.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_023 ra=141000.00 dec=254700.00' 2013-Feb-22 03:53:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 03:53:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 03:53:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 214.86 -13.8 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p2_023 141000.00 254700.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 03:53:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 03:53:31 LOG5 begin_task: Level: (2) ID = <10382> Status = 0 0 0 0 ok 2013-Feb-22 03:53:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC5523_p2_021' 2013-Feb-22 03:53:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 03:53:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p2_023} 2013-Feb-22 03:53:31 INFO3 fixed_driftmap: Sending telescope to Az = 214.86 and ZA = 9.09 2013-Feb-22 03:53:31 LOG3 track_source: Calling 'track_source NGC5523_p2_023 214.86 9.0867733085 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 03:53:31 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 03:53:31 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2013-Feb-22 03:53:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_023} INFO {Slewing to source 'NGC5523_p2_023' ...} 2013-Feb-22 03:53:31 INFO1 track_source: Starting to track NGC5523_p2_023 2013-Feb-22 03:53:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_023" 2013-Feb-22 03:53:31 LOG3 vw_send: To DATATAKING: set ra 214.86 2013-Feb-22 03:53:31 LOG3 vw_send: To DATATAKING: set dec 9.0867733085 2013-Feb-22 03:53:31 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 03:53:31 LOG3 vw_send: To DATATAKING: pnt tr 214.86 9.0867733085 -CF 2013-Feb-22 03:53:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:53:31 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 03:53:31 LOG5 finish_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2013-Feb-22 03:53:31 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 03:53:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:53:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 03:53:32 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2013-Feb-22 03:53:32 START begin_task: Starting task 'rotate ALFA to -13.8 degrees' 2013-Feb-22 03:53:32 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2013-Feb-22 03:53:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -13.8 degrees ...} 2013-Feb-22 03:53:32 INFO2 rotate_alfa: ALFA commanded to -13.8 degrees 2013-Feb-22 03:53:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -13.8 REPLY 2013-Feb-22 03:53:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 03:53:32 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 03:53:32 LOG5 begin_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_023" 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: set ra 214.86 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: vw% 214.86 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: set dec 9.0867733085 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: 9.0867733085 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: pnt tr 214.86 9.0867733085 -CF 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 03:53:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 03:53:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 03:53:40 INFO3 alfa_motor: ALFA rotator in-position -13.80 degrees 2013-Feb-22 03:53:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 03:53:40 LOG5 end_task: Level: (4) ID = <10385> Status = 0 0 0 0 ok 2013-Feb-22 03:53:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:53:40 STOP finish_task: Finishing task 'rotate ALFA to -13.8 degrees' 2013-Feb-22 03:53:40 LOG5 finish_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2013-Feb-22 03:53:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to -13.8 degrees 2013-Feb-22 03:53:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:53:40 STOP end_task: Finishing task 'rotate ALFA to -13.8 degrees' with status 'OK' 2013-Feb-22 03:53:40 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2013-Feb-22 03:53:40 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 03:53:40 LOG5 begin_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2013-Feb-22 03:53:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 03:53:40 LOG3 waittrk: Start waittrk 5 2013-Feb-22 03:53:40 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 03:53:40 LOG5 begin_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2013-Feb-22 03:53:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 03:53:45 LOG5 end_task: Level: (4) ID = <10387> Status = 0 0 0 0 ok 2013-Feb-22 03:53:45 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 03:53:45 LOG5 begin_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 03:54:21 LOG5 end_task: Level: (4) ID = <10388> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 03:54:21 INFO2 waittrk: Now tracking NGC5523_p2_023 2013-Feb-22 03:54:21 LOG4 waittrk: Current telescope position: Az = 214.49 ZA = 9.10 2013-Feb-22 03:54:21 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 03:54:21 LOG5 finish_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 03:54:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 03:54:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 03:54:21 LOG5 end_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 03:54:21 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 03:54:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 03:54:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:54:21 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 03:54:21 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 03:54:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 03:54:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:54:21 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 03:54:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 03:54:21 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2013-Feb-22 03:54:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 03:54:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 03:54:22 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 03:54:22 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 03:54:22 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2013-Feb-22 03:54:22 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 03:54:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 03:54:22 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2013-Feb-22 03:54:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 03:54:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 03:54:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 03:54:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 03:54:22 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 03:54:22 LOG5 begin_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2013-Feb-22 03:54:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 03:54:22 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 03:54:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 03:54:22 LOG5 end_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2013-Feb-22 03:54:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 03:54:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 03:54:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 03:54:22 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2013-Feb-22 03:54:22 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 03:54:22 INFO2 astwait: Waiting for 581 seconds from 07:54:22 to 08:04:03 UTC ... 2013-Feb-22 03:54:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 581 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 03:54:22 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 03:54:22 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2013-Feb-22 04:04:03 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 04:04:03 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2013-Feb-22 04:04:03 INFO3 astwait: Finished waiting 2013-Feb-22 04:04:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 04:04:03 LOG5 dopset_later: Calling 'dopset_later 61.358834231343039' 2013-Feb-22 04:04:03 INFO3 dopset_later: Setting Doppler correction for 04:05:03 (61.4 seconds from now) 2013-Feb-22 04:04:03 LOG5 antvel: Calling 'antvel 214.860000 9.086773 F Heliocentric 61.358834231343039' 2013-Feb-22 04:04:03 LOG2 antvel: Transforming current Az = 214.86 ZA = 9.09 to apparent RA = 14:10:37.0 Dec = +25:43:02.0 2013-Feb-22 04:04:03 LOG2 antvel: Parameters to Doppler: Heliocentric 29103 2013 53 0.0 2013-Feb-22 04:04:03 INFO5 antvel: Computed antenna velocity: -17.69295 km/s 2013-Feb-22 04:04:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.692950345100002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 04:04:03 INFO4 dopset_gen: New sky frequencies: 1381.324951 1381.324951 1381.324951 1381.324951 1381.324951 1381.324951 1381.324951 1381.324951 1381.324951 2013-Feb-22 04:04:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.324951 sky0=1381.324951 sky1=1381.324951 sky2=1381.324951 sky3=1381.324951 sky4=1381.324951 sky5=1381.324951 sky6=1381.324951 sky7=1381.324951 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 04:04:03 LOG2 dopset_gen: Result from 'sky2syn': 1631.324951 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631324951.0} 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 04:04:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 04:04:03 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 04:04:03 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:02.8 Dec = +25:46:44.6 2013-Feb-22 04:04:03 LOG3 track_source: Calling 'track_source NGC5523_p2_023 140902.8 254644.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 04:04:03 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 04:04:03 LOG5 begin_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2013-Feb-22 04:04:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_023} INFO {Slewing to source 'NGC5523_p2_023' ...} 2013-Feb-22 04:04:03 INFO1 track_source: Starting to track NGC5523_p2_023 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_023" 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: set ra 140902.8 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: set dec 254644.6 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: pnt tr 140902.8 254644.6 -CJ 2013-Feb-22 04:04:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 04:04:03 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 04:04:04 LOG5 finish_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2013-Feb-22 04:04:04 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 04:04:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:04:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 04:04:04 LOG5 end_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2013-Feb-22 04:04:04 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 04:04:04 LOG5 begin_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2013-Feb-22 04:04:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 04:04:04 LOG3 waittrk: Start waittrk 5 2013-Feb-22 04:04:04 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 04:04:04 LOG5 begin_task: Level: (4) ID = <10396> Status = 0 0 0 0 ok 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631324951.0} 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_023" 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: set ra 140902.8 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 140902.8 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: set dec 254644.6 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: 254644.6 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: pnt tr 140902.8 254644.6 -CJ 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 04:04:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 04:04:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 04:04:09 LOG5 end_task: Level: (4) ID = <10396> Status = 0 0 0 0 ok 2013-Feb-22 04:04:09 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 04:04:09 LOG5 begin_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2013-Feb-22 04:04:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 04:04:10 LOG5 end_task: Level: (4) ID = <10397> Status = 0 0 0 0 ok 2013-Feb-22 04:04:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 04:04:10 INFO2 waittrk: Now tracking NGC5523_p2_023 2013-Feb-22 04:04:10 LOG4 waittrk: Current telescope position: Az = 214.42 ZA = 9.09 2013-Feb-22 04:04:10 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 04:04:10 LOG5 finish_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2013-Feb-22 04:04:10 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 04:04:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:04:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 04:04:10 LOG5 end_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2013-Feb-22 04:04:10 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 04:04:10 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2013-Feb-22 04:04:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 04:04:10 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 04:04:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 04:04:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 04:04:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 04:04:11 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 04:04:11 LOG5 begin_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2013-Feb-22 04:04:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 04:04:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 04:04:13 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:13 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 04:04:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 04:04:13 LOG5 end_task: Level: (4) ID = <10399> Status = 0 0 0 0 ok 2013-Feb-22 04:04:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 04:04:13 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 04:04:14 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2013-Feb-22 04:04:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 04:04:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:04:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:04:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:04:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:04:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 04:04:14 LOG5 begin_task: Level: (5) ID = <10401> Status = 0 0 0 0 ok 2013-Feb-22 04:04:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 04:04:14 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 04:04:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 5 3 dB 2013-Feb-22 04:04:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 9 6 dB 2013-Feb-22 04:04:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 10 5 dB 2013-Feb-22 04:04:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 04:04:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 04:04:14 LOG5 end_task: Level: (5) ID = <10401> Status = 0 0 0 0 ok 2013-Feb-22 04:04:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.005 0.907 ALFA beam 1: 0.985 0.893 2013-Feb-22 04:04:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.120 1.060 ALFA beam 3: 0.971 1.047 2013-Feb-22 04:04:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.947 0.925 ALFA beam 5: 0.912 1.082 2013-Feb-22 04:04:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.061 0.989 ALFA beam 7: 0.931 0.937 2013-Feb-22 04:04:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 04:04:14 LOG5 finish_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2013-Feb-22 04:04:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 04:04:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:04:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 04:04:15 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2013-Feb-22 04:04:15 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 04:04:15 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2013-Feb-22 04:04:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 04:04:15 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 04:04:15 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 04:04:15 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 04:04:15 LOG5 begin_task: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2013-Feb-22 04:04:18 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 04:04:18 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 04:04:18 LOG5 task_failed: Level: (5) ID = <10403> Status = 0 0 0 0 ok 2013-Feb-22 04:04:18 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 04:04:18 LOG5 end_task: Level: (5) ID = <10403> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 04:04:18 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 04:04:18 LOG5 finish_task: Level: (4) ID = <10402> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 04:04:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 04:04:18 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 04:04:18 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 04:04:18 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 04:04:18 LOG5 finish_task: Level: (3) ID = <10398> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 04:04:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 04:04:18 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 04:04:18 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 04:04:18 LOG5 finish_task: Level: (2) ID = <10382> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 04:04:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 04:04:18 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 04:04:18 LOG5 end_task: Level: (2) ID = <10382> Status = 0 0 0 1 failed 2013-Feb-22 04:04:18 ALERT run_command_file: Stopping command file processing at line 106! 2013-Feb-22 04:04:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 04:04:19 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 04:04:19 LOG5 finish_task: Level: (1) ID = <10381> Status = 0 0 0 1 failed 2013-Feb-22 04:04:19 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 04:04:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 04:04:19 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 04:04:19 LOG5 end_task: Level: (1) ID = <10381> Status = 0 0 0 1 failed 2013-Feb-22 04:04:44 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 04:04:44 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 109 1 56 2013-Feb-22 04:04:44 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 109 1 56' 2013-Feb-22 04:04:44 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 04:04:44 LOG5 begin_task: Level: (1) ID = <10404> Status = 0 0 0 0 ok 2013-Feb-22 04:04:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 04:04:44 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 109 2013-Feb-22 04:04:44 COMMAND run_command_line: EXECUTING command 109: 'ENDIF' 2013-Feb-22 04:04:44 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2013-Feb-22 04:04:44 LOG1 task_failed: Task 'running command file '130222.cmd'' failed! 2013-Feb-22 04:04:44 LOG5 task_failed: Level: (1) ID = <10404> Status = 0 0 0 0 ok 2013-Feb-22 04:04:44 ALERT run_command_file: Stopping command file processing at line 109! 2013-Feb-22 04:04:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 04:04:44 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 04:04:44 LOG5 finish_task: Level: (1) ID = <10404> Status = 0 0 0 1 failed 2013-Feb-22 04:04:44 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 04:04:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 04:04:45 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 04:04:45 LOG5 end_task: Level: (1) ID = <10404> Status = 0 0 0 1 failed 2013-Feb-22 04:04:47 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Feb-22 04:04:47 LOG4 exec_msg: From OBSERVER: run_command_file 130222.cmd 110 1 56 2013-Feb-22 04:04:47 LOG4 run_command_file: Calling 'run_command_file 130222.cmd 110 1 56' 2013-Feb-22 04:04:47 BEGIN begin_task: Starting task 'running command file '130222.cmd'' 2013-Feb-22 04:04:47 LOG5 begin_task: Level: (1) ID = <10405> Status = 0 0 0 0 ok 2013-Feb-22 04:04:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130222.cmd' ...} 2013-Feb-22 04:04:47 NOTE run_command_file: Starting execution of command file '130222.cmd' from line 110 2013-Feb-22 04:04:47 COMMAND run_command_line: EXECUTING command 112: 'IF LSTSLEW(NGC5523_p2_025) < 135906 THEN' 2013-Feb-22 04:04:49 LOG3 is_if_valid: Current source data: up 215.3 9.1 UP - - 102 0.1 2013-Feb-22 04:04:49 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p2_025) < 135906 2013-Feb-22 04:04:49 INFO5 is_if_valid: Condition parsed as: 13.790482666666668 < 13.984999999999999 2013-Feb-22 04:04:49 COMMAND run_command_line: EXECUTING command 113: 'FIXEDDRIFT az=199.50 alfaangle=1.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_025 ra=141000.00 dec=254400.00' 2013-Feb-22 04:04:49 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Feb-22 04:04:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Feb-22 04:04:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 199.50 1.2 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p2_025 141000.00 254400.00 J 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 04:04:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Feb-22 04:04:49 LOG5 begin_task: Level: (2) ID = <10406> Status = 0 0 0 0 ok 2013-Feb-22 04:04:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC5523_p2_023' 2013-Feb-22 04:04:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Feb-22 04:04:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p2_025} 2013-Feb-22 04:04:49 INFO3 fixed_driftmap: Sending telescope to Az = 199.50 and ZA = 7.78 2013-Feb-22 04:04:49 LOG3 track_source: Calling 'track_source NGC5523_p2_025 199.50 7.7829922139 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 04:04:49 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 04:04:49 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2013-Feb-22 04:04:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_025} INFO {Slewing to source 'NGC5523_p2_025' ...} 2013-Feb-22 04:04:49 INFO1 track_source: Starting to track NGC5523_p2_025 2013-Feb-22 04:04:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_025" 2013-Feb-22 04:04:49 LOG3 vw_send: To DATATAKING: set ra 199.50 2013-Feb-22 04:04:49 LOG3 vw_send: To DATATAKING: set dec 7.7829922139 2013-Feb-22 04:04:49 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 04:04:49 LOG3 vw_send: To DATATAKING: pnt tr 199.50 7.7829922139 -CF 2013-Feb-22 04:04:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 04:04:50 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 04:04:50 LOG5 finish_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2013-Feb-22 04:04:50 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 04:04:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:04:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 04:04:50 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2013-Feb-22 04:04:50 START begin_task: Starting task 'rotate ALFA to +1.2 degrees' 2013-Feb-22 04:04:50 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2013-Feb-22 04:04:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +1.2 degrees ...} 2013-Feb-22 04:04:50 INFO2 rotate_alfa: ALFA commanded to +1.2 degrees 2013-Feb-22 04:04:50 LOG3 sock_errsend: To ALFAMOTOR: POSITION 1.2 REPLY 2013-Feb-22 04:04:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Feb-22 04:04:50 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Feb-22 04:04:50 LOG5 begin_task: Level: (4) ID = <10409> Status = 0 0 0 0 ok 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_025" 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: set ra 199.50 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: vw% 199.50 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: set dec 7.7829922139 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: 7.7829922139 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: pnt tr 199.50 7.7829922139 -CF 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 04:04:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 04:04:59 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Feb-22 04:04:59 INFO3 alfa_motor: ALFA rotator in-position +1.20 degrees 2013-Feb-22 04:04:59 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Feb-22 04:04:59 LOG5 end_task: Level: (4) ID = <10409> Status = 0 0 0 0 ok 2013-Feb-22 04:04:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 04:04:59 STOP finish_task: Finishing task 'rotate ALFA to +1.2 degrees' 2013-Feb-22 04:05:00 LOG5 finish_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2013-Feb-22 04:05:00 INFO2 finish_task: DONE finished configuration: rotating ALFA to +1.2 degrees 2013-Feb-22 04:05:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:05:00 STOP end_task: Finishing task 'rotate ALFA to +1.2 degrees' with status 'OK' 2013-Feb-22 04:05:00 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2013-Feb-22 04:05:00 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 04:05:00 LOG5 begin_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2013-Feb-22 04:05:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 04:05:00 LOG3 waittrk: Start waittrk 5 2013-Feb-22 04:05:00 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 04:05:00 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2013-Feb-22 04:05:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 04:05:05 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2013-Feb-22 04:05:05 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 04:05:05 LOG5 begin_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2013-Feb-22 04:05:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 04:05:36 LOG5 end_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2013-Feb-22 04:05:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 04:05:36 INFO2 waittrk: Now tracking NGC5523_p2_025 2013-Feb-22 04:05:36 LOG4 waittrk: Current telescope position: Az = 199.19 ZA = 7.80 2013-Feb-22 04:05:36 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 04:05:36 LOG5 finish_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2013-Feb-22 04:05:36 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 04:05:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:05:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 04:05:37 LOG5 end_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 START begin_task: Starting task 'selecting calibration type' 2013-Feb-22 04:05:37 LOG5 begin_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Feb-22 04:05:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Feb-22 04:05:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 04:05:37 START begin_task: Starting task 'waiting on setcal' 2013-Feb-22 04:05:37 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Feb-22 04:05:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 04:05:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:05:37 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 04:05:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Feb-22 04:05:37 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Feb-22 04:05:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 04:05:37 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Feb-22 04:05:37 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 04:05:37 LOG5 begin_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 04:05:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 04:05:37 LOG5 end_task: Level: (4) ID = <10415> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 04:05:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Feb-22 04:05:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Feb-22 04:05:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Feb-22 04:05:37 START begin_task: Starting task 'waiting on command to ALFA' 2013-Feb-22 04:05:37 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2013-Feb-22 04:05:37 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:05:37 LOG4 got_alfamon: From ALFAMON: ACK 2013-Feb-22 04:05:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Feb-22 04:05:37 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2013-Feb-22 04:05:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Feb-22 04:05:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Feb-22 04:05:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Feb-22 04:05:38 LOG5 end_task: Level: (3) ID = <10413> Status = 0 0 0 0 ok 2013-Feb-22 04:05:38 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Feb-22 04:05:38 INFO2 astwait: Waiting for 594 seconds from 08:05:38 to 08:15:32 UTC ... 2013-Feb-22 04:05:38 LOG4 send_obs_status: To obs_status: <1> TASKTIME 594 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Feb-22 04:05:38 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Feb-22 04:05:38 LOG5 begin_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2013-Feb-22 04:15:32 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Feb-22 04:15:32 LOG5 end_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2013-Feb-22 04:15:32 INFO3 astwait: Finished waiting 2013-Feb-22 04:15:32 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Feb-22 04:15:32 LOG5 dopset_later: Calling 'dopset_later 60.607819017495942' 2013-Feb-22 04:15:32 INFO3 dopset_later: Setting Doppler correction for 04:16:32 (60.6 seconds from now) 2013-Feb-22 04:15:32 LOG5 antvel: Calling 'antvel 199.500000 7.782992 F Heliocentric 60.607819017495942' 2013-Feb-22 04:15:32 LOG2 antvel: Transforming current Az = 199.50 ZA = 7.78 to apparent RA = 14:10:37.1 Dec = +25:40:02.0 2013-Feb-22 04:15:32 LOG2 antvel: Parameters to Doppler: Heliocentric 29792 2013 53 0.0 2013-Feb-22 04:15:32 INFO5 antvel: Computed antenna velocity: -17.68845 km/s 2013-Feb-22 04:15:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.6884540444 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Feb-22 04:15:32 INFO4 dopset_gen: New sky frequencies: 1381.324930 1381.324930 1381.324930 1381.324930 1381.324930 1381.324930 1381.324930 1381.324930 1381.324930 2013-Feb-22 04:15:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.324930 sky0=1381.324930 sky1=1381.324930 sky2=1381.324930 sky3=1381.324930 sky4=1381.324930 sky5=1381.324930 sky6=1381.324930 sky7=1381.324930 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Feb-22 04:15:32 LOG2 dopset_gen: Result from 'sky2syn': 1631.324930 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631324930.0} 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 04:15:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Feb-22 04:15:32 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Feb-22 04:15:32 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:03.6 Dec = +25:43:44.6 2013-Feb-22 04:15:32 LOG3 track_source: Calling 'track_source NGC5523_p2_025 140903.6 254344.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Feb-22 04:15:32 START begin_task: Starting task 'sending tracking commands' 2013-Feb-22 04:15:32 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2013-Feb-22 04:15:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_025} INFO {Slewing to source 'NGC5523_p2_025' ...} 2013-Feb-22 04:15:32 INFO1 track_source: Starting to track NGC5523_p2_025 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_025" 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: set ra 140903.6 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: set dec 254344.6 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: pnt tr 140903.6 254344.6 -CJ 2013-Feb-22 04:15:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 04:15:32 STOP finish_task: Finishing task 'sending tracking commands' 2013-Feb-22 04:15:32 LOG5 finish_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2013-Feb-22 04:15:32 INFO2 finish_task: DONE finished sending: tracking commands 2013-Feb-22 04:15:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:15:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Feb-22 04:15:33 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2013-Feb-22 04:15:33 START begin_task: Starting task 'waiting on telescope' 2013-Feb-22 04:15:33 LOG5 begin_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2013-Feb-22 04:15:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Feb-22 04:15:33 LOG3 waittrk: Start waittrk 5 2013-Feb-22 04:15:33 START begin_task: Starting task 'waiting on telescope movement' 2013-Feb-22 04:15:33 LOG5 begin_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631324930.0} 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_025" 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: set ra 140903.6 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% 140903.6 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: set dec 254344.6 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: 254344.6 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: pnt tr 140903.6 254344.6 -CJ 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Feb-22 04:15:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Feb-22 04:15:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Feb-22 04:15:38 LOG5 end_task: Level: (4) ID = <10420> Status = 0 0 0 0 ok 2013-Feb-22 04:15:38 START begin_task: Starting task 'waiting on telescope on source' 2013-Feb-22 04:15:38 LOG5 begin_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2013-Feb-22 04:15:39 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Feb-22 04:15:39 LOG5 end_task: Level: (4) ID = <10421> Status = 0 0 0 0 ok 2013-Feb-22 04:15:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Feb-22 04:15:39 INFO2 waittrk: Now tracking NGC5523_p2_025 2013-Feb-22 04:15:39 LOG4 waittrk: Current telescope position: Az = 199.09 ZA = 7.79 2013-Feb-22 04:15:39 STOP finish_task: Finishing task 'waiting on telescope' 2013-Feb-22 04:15:39 LOG5 finish_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2013-Feb-22 04:15:39 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Feb-22 04:15:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:15:39 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Feb-22 04:15:39 LOG5 end_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2013-Feb-22 04:15:39 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Feb-22 04:15:39 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2013-Feb-22 04:15:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Feb-22 04:15:39 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Feb-22 04:15:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Feb-22 04:15:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Feb-22 04:15:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 04:15:39 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Feb-22 04:15:39 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2013-Feb-22 04:15:40 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Feb-22 04:15:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Feb-22 04:15:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:42 LOG4 got_cormsg: From DATATAKING: DONE 2013-Feb-22 04:15:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Feb-22 04:15:42 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2013-Feb-22 04:15:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Feb-22 04:15:42 START begin_task: Starting task 'adjusting WAPP power' 2013-Feb-22 04:15:42 LOG5 begin_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2013-Feb-22 04:15:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 04:15:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:15:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:15:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:15:43 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Feb-22 04:15:43 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Feb-22 04:15:43 LOG5 begin_task: Level: (5) ID = <10425> Status = 0 0 0 0 ok 2013-Feb-22 04:15:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Feb-22 04:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:15:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 4 8 dB 2013-Feb-22 04:15:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 5 3 dB 2013-Feb-22 04:15:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 9 6 dB 2013-Feb-22 04:15:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 10 5 dB 2013-Feb-22 04:15:43 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Feb-22 04:15:43 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Feb-22 04:15:43 LOG5 end_task: Level: (5) ID = <10425> Status = 0 0 0 0 ok 2013-Feb-22 04:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.983 0.902 ALFA beam 1: 0.977 0.895 2013-Feb-22 04:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.108 1.066 ALFA beam 3: 0.965 1.044 2013-Feb-22 04:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.943 0.922 ALFA beam 5: 0.900 1.070 2013-Feb-22 04:15:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.023 0.955 ALFA beam 7: 0.897 0.907 2013-Feb-22 04:15:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Feb-22 04:15:43 LOG5 finish_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2013-Feb-22 04:15:43 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Feb-22 04:15:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Feb-22 04:15:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Feb-22 04:15:43 LOG5 end_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2013-Feb-22 04:15:43 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Feb-22 04:15:43 LOG5 begin_task: Level: (4) ID = <10426> Status = 0 0 0 0 ok 2013-Feb-22 04:15:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Feb-22 04:15:44 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Feb-22 04:15:44 LOG3 socket_wait: To MOCK: ADJP30 2013-Feb-22 04:15:44 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Feb-22 04:15:44 LOG5 begin_task: Level: (5) ID = <10427> Status = 0 0 0 0 ok 2013-Feb-22 04:15:47 NOTE from_mock: From MOCK: adjperr die:readError: pdevattn call to pnetsig exited with error 2013-Feb-22 04:15:47 LOG1 task_failed: Task 'waiting on adjust Mock spectrometer power:30' failed! 2013-Feb-22 04:15:47 LOG5 task_failed: Level: (5) ID = <10427> Status = 0 0 0 0 ok 2013-Feb-22 04:15:47 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'FAILED' 2013-Feb-22 04:15:47 LOG5 end_task: Level: (5) ID = <10427> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Feb-22 04:15:47 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Feb-22 04:15:47 LOG5 finish_task: Level: (4) ID = <10426> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 ERROR finish_task: ERROR failed adjusting: Mock spectrometer power 2013-Feb-22 04:15:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 04:15:47 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'FAILED' 2013-Feb-22 04:15:47 LOG5 end_task: Level: (4) ID = <10426> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Feb-22 04:15:47 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Feb-22 04:15:47 LOG5 finish_task: Level: (3) ID = <10422> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 ERROR finish_task: ERROR failed adjusting: WAPP+Mock power levels 2013-Feb-22 04:15:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2013-Feb-22 04:15:47 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'FAILED' 2013-Feb-22 04:15:47 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Feb-22 04:15:47 LOG5 finish_task: Level: (2) ID = <10406> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2013-Feb-22 04:15:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 04:15:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2013-Feb-22 04:15:47 LOG5 end_task: Level: (2) ID = <10406> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 ALERT run_command_file: Stopping command file processing at line 113! 2013-Feb-22 04:15:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Feb-22 04:15:47 STOP finish_task: Finishing task 'running command file '130222.cmd'' 2013-Feb-22 04:15:47 LOG5 finish_task: Level: (1) ID = <10405> Status = 0 0 0 1 failed 2013-Feb-22 04:15:47 ERROR finish_task: ERROR failed running: command file '130222.cmd' 2013-Feb-22 04:15:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Feb-22 04:15:48 END end_task: Finishing task 'running command file '130222.cmd'' with status 'FAILED' 2013-Feb-22 04:15:48 LOG5 end_task: Level: (1) ID = <10405> Status = 0 0 0 1 failed 2013-Feb-22 04:20:59 ALERT CIMA-exit_cima: Exiting CIMA ... 2013-Feb-22 04:20:59 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2013-Feb-22 04:20:59 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2013-Feb-22 04:20:59 LOG3 vw_send: To DATATAKING: mvdata a2048 2013-Feb-22 04:20:59 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2013-Feb-22 04:20:59 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2013-Feb-22 04:20:59 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2013-Feb-22 04:20:59 NOTE CIMA-exit_cima: Cleaning up session ... 2013-Feb-22 04:20:59 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2013-Feb-22 04:20:59 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2013-Feb-22 04:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Feb-22 04:21:01 LOG3 exec_msg: Closing socket 2013-Feb-22 04:21:01 INFO4 bgerror: sock_write: 'connect' error --- Connection refused 2013-Feb-22 04:21:01 INFO4 bgerror: while executing 2013-Feb-22 04:21:01 INFO4 bgerror: "sockmsg" 2013-Feb-22 04:21:01 INFO4 bgerror: (procedure "exec_msg" line 12) 2013-Feb-22 04:21:01 INFO4 bgerror: invoked from within 2013-Feb-22 04:21:01 INFO4 bgerror: "exec_msg" 2013-Feb-22 04:21:01 ERROR bgerror: ERROR script run by 'executive' aborted 2013-Feb-22 04:21:01 ERROR bgerror: ERROR reason: sock_write: 'connect' error --- Connection refused 2013-Feb-22 04:21:01 NOTE bgerror: The error occurred while the executive was executing the following task stack: 2013-Feb-22 04:21:01 NOTE query_task: The executive is IDLE 2013-Feb-22 04:21:01 WARNING abort_task: WARNING cleaning up after crash! 2013-Feb-22 04:21:01 INFO4 clean_up_after_crash: No cleaning required after crash