2013-Jan-24 05:46:39 BEGIN executive: CIMA executive starting ... 2013-Jan-24 05:46:39 NOTE executive: STARTING NEW CIMA SESSION 2013-Jan-24 05:46:39 INFO1 executive: Using CIMA version 3.3.04 'stable' from 2012-11-29 16:58 2013-Jan-24 05:46:39 INFO4 executive: This is an ON-LINE session 2013-Jan-24 05:46:39 INFO4 executive: This is a LOCAL session 2013-Jan-24 05:46:39 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2013-Jan-24 05:46:40 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Elliot Gonzalez' 2013-Jan-24 05:46:40 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20130124' 2013-Jan-24 05:46:40 LOG2 log_preferences: Currently applied preferences: 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(dailylog) = daily 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(offlinelog) = write 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(datawindow) = ignore 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(limitwarning) = enabled 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(wappfailure) = abort 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(helpstyle) = stay-open 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(logcolours) = full 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(displaylevel) = LOG5 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(loglevel) = LOG5 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(displayformat) = long 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(logformat) = new 2013-Jan-24 05:46:40 LOG2 log_preferences: prefs(fontsize) = 4 2013-Jan-24 05:46:40 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2013-Jan-24 05:46:40 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2013-Jan-24 05:46:40 ALERT executive: CIMA executive ready 2013-Jan-24 05:46:42 NOTE frontend: CIMA frontend ready 2013-Jan-24 05:46:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:46:42 LOG4 got_cormsg: From DATATAKING: setup 2013-Jan-24 05:46:44 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2013-Jan-24 05:46:44 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2013-Jan-24 05:46:44 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2013-Jan-24 05:46:44 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2013-Jan-24 05:46:44 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Jan-24 05:46:45 NOTE select_receiver: Starting to select receiver ALFA 2013-Jan-24 05:46:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Jan-24 05:46:45 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Jan-24 05:46:45 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Jan-24 05:46:45 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Jan-24 05:46:45 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Jan-24 05:46:45 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Jan-24 05:46:45 DONE finish_task: DONE finished selecting: receiver ALFA 2013-Jan-24 05:46:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:46:45 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Jan-24 05:46:45 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: io 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: tape off 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: vw% connectall 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2013-Jan-24 05:46:47 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:22 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2013-Jan-24 05:47:22 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima33.cmd' (at lines 59 - 75) 2013-Jan-24 05:47:22 INFO4 CIMA-load_command_file: Loaded command file '130124.cmd' 2013-Jan-24 05:47:24 INFO1 CIMA-run_command_file: Transferring command file '130124.cmd' to executive ... 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(NGC5523_p1_076) < 134606 THEN} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=222.29 alfaangle=-21.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_076 ra=141000.00 dec=242730.00} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(NGC5523_p1_078) < 135821 THEN} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=204.92 alfaangle=-3.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_078 ra=141000.00 dec=242430.00} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(NGC5523_p1_080) < 141036 THEN} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_080 ra=141000.00 dec=242130.00} 2013-Jan-24 05:47:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(NGC5523_p2_002) < 142250 THEN} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=160.81 alfaangle=36.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_002 ra=141000.00 dec=261830.00} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 65 {LOAD togs_cima33.conf} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 66 {TRACKCURPOS} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 67 {ALFAANGLE 19} 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 71 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2013-Jan-24 05:47:25 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: run_command_file 130124.cmd 1 1 32 2013-Jan-24 05:47:25 LOG4 run_command_file: Calling 'run_command_file 130124.cmd 1 1 32' 2013-Jan-24 05:47:25 BEGIN begin_task: Starting task 'running command file '130124.cmd'' 2013-Jan-24 05:47:25 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2013-Jan-24 05:47:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130124.cmd' ...} 2013-Jan-24 05:47:25 NOTE run_command_file: Starting execution of command file '130124.cmd' from line 1 2013-Jan-24 05:47:25 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2013-Jan-24 05:47:25 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:47:25 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Jan-24 05:47:25 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Jan-24 05:47:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Jan-24 05:47:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Jan-24 05:47:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:47:27 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Jan-24 05:47:27 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Jan-24 05:47:27 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Jan-24 05:47:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Jan-24 05:47:27 INFO1 config_iflo: Selecting receiver ALFA 2013-Jan-24 05:47:27 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2013-Jan-24 05:47:27 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2013-Jan-24 05:47:27 START begin_task: Starting task 'selecting receiver ALFA' 2013-Jan-24 05:47:27 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Jan-24 05:47:27 NOTE select_receiver: Starting to select receiver ALFA 2013-Jan-24 05:47:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2013-Jan-24 05:47:27 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2013-Jan-24 05:47:27 LOG3 vw_send: To DATATAKING: acvlbical off 2013-Jan-24 05:47:27 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2013-Jan-24 05:47:27 STOP finish_task: Finishing task 'selecting receiver ALFA' 2013-Jan-24 05:47:28 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Jan-24 05:47:28 INFO2 finish_task: DONE finished selecting: receiver ALFA 2013-Jan-24 05:47:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:47:28 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2013-Jan-24 05:47:28 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2013-Jan-24 05:47:28 START begin_task: Starting task 'waiting for receiver ALFA' 2013-Jan-24 05:47:28 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Jan-24 05:47:28 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2013-Jan-24 05:47:28 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2013-Jan-24 05:47:28 INFO1 config_iflo: Configuring rest of the IF/LO path 2013-Jan-24 05:47:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2013-Jan-24 05:47:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:47:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:47:28 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:47:28 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2013-Jan-24 05:47:28 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:47:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:47:28 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2013-Jan-24 05:47:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:47:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: alfafb 1 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2013-Jan-24 05:47:28 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Jan-24 05:47:28 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2013-Jan-24 05:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2013-Jan-24 05:47:28 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Jan-24 05:47:28 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Jan-24 05:47:28 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Jan-24 05:47:28 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Jan-24 05:47:29 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Jan-24 05:47:29 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2013-Jan-24 05:47:29 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2013-Jan-24 05:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2013-Jan-24 05:47:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Jan-24 05:47:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:47:29 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Jan-24 05:47:29 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: acvlbical off 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: alfafb 1 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2013-Jan-24 05:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2013-Jan-24 05:47:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:47:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2013-Jan-24 05:47:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2013-Jan-24 05:47:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2013-Jan-24 05:47:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2013-Jan-24 05:47:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:47:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:35 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:36 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:42 WARNING CIMA-warn_on_position: WARNING the telescope is close (ZA = 1.21) to the zenith angle limit 1.06 degrees! 2013-Jan-24 05:47:42 LOG4 CIMA-warn_on_position: Current position: Az/ZA = 179.8023 1.2078 RA/Dec = 13:35:33 +19:37:56 2013-Jan-24 05:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:43 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:47:43 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Jan-24 05:47:43 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2013-Jan-24 05:47:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Jan-24 05:47:43 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Jan-24 05:47:43 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Jan-24 05:47:43 DONE finish_task: DONE finished configuration: IF/LO path 2013-Jan-24 05:47:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:47:43 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Jan-24 05:47:43 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2013-Jan-24 05:47:43 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Jan-24 05:47:43 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Jan-24 05:47:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Jan-24 05:47:43 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Jan-24 05:47:43 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Jan-24 05:47:43 START begin_task: Starting task 'selecting calibration port' 2013-Jan-24 05:47:43 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2013-Jan-24 05:47:43 LOG3 vw_send: To DATATAKING: calport 3 2013-Jan-24 05:47:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Jan-24 05:47:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:47:43 START begin_task: Starting task 'waiting on calport' 2013-Jan-24 05:47:43 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2013-Jan-24 05:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:43 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Jan-24 05:47:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:47:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:44 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:47:44 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Jan-24 05:47:44 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2013-Jan-24 05:47:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Jan-24 05:47:44 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Jan-24 05:47:44 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2013-Jan-24 05:47:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:47:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:47:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:47:44 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2013-Jan-24 05:47:44 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:47:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:47:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:47:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:47:44 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:44 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Jan-24 05:47:44 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Jan-24 05:47:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:47:45 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Jan-24 05:47:45 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:47:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:47:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:47:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:47:45 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2013-Jan-24 05:47:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:47:45 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Jan-24 05:47:45 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Jan-24 05:47:45 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Jan-24 05:47:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:47:45 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Jan-24 05:47:45 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2013-Jan-24 05:47:45 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2013-Jan-24 05:47:45 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Jan-24 05:47:45 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2013-Jan-24 05:47:46 LOG3 is_if_valid: Current source data: up 218.2 8.9 UP - - 104 3.2 2013-Jan-24 05:47:46 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Jan-24 05:47:46 INFO5 is_if_valid: Condition parsed as: 1 2013-Jan-24 05:47:46 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2013-Jan-24 05:47:46 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2013-Jan-24 05:47:46 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2013-Jan-24 05:47:46 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Jan-24 05:47:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2013-Jan-24 05:47:46 LOG3 track_source: Calling 'track_source galfasrc 140000.0 +252000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Jan-24 05:47:46 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 05:47:46 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Jan-24 05:47:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2013-Jan-24 05:47:46 INFO1 track_source: Starting to track galfasrc 2013-Jan-24 05:47:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2013-Jan-24 05:47:46 LOG3 vw_send: To DATATAKING: set ra 140000.0 2013-Jan-24 05:47:46 LOG3 vw_send: To DATATAKING: set dec +252000 2013-Jan-24 05:47:46 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 05:47:46 LOG3 vw_send: To DATATAKING: pnt tr 140000.0 +252000 -CJ 2013-Jan-24 05:47:46 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Jan-24 05:47:46 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 05:47:46 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Jan-24 05:47:46 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 05:47:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:47:46 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 05:47:46 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2013-Jan-24 05:47:46 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2013-Jan-24 05:47:46 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Jan-24 05:47:46 DONE finish_task: DONE finished tracking: source 'galfasrc' 2013-Jan-24 05:47:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:47:47 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2013-Jan-24 05:47:47 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2013-Jan-24 05:47:47 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2013-Jan-24 05:47:47 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2013-Jan-24 05:47:47 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2013-Jan-24 05:47:47 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Jan-24 05:47:47 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2013-Jan-24 05:47:47 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2013-Jan-24 05:47:47 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Jan-24 05:47:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Jan-24 05:47:47 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Jan-24 05:47:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Jan-24 05:47:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Jan-24 05:47:47 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Jan-24 05:47:47 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Jan-24 05:47:47 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Jan-24 05:47:47 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2013-Jan-24 05:47:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20130124.a2048.0000.fits 2013-Jan-24 05:47:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:47:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2013-Jan-24 05:47:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Jan-24 05:47:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 05:47:47 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20130124.a2048.0000.fits} 2013-Jan-24 05:47:47 LOG4 got_cormsg: From DATATAKING: set ra 140000.0 2013-Jan-24 05:47:47 LOG4 got_cormsg: From DATATAKING: vw% 140000.0 2013-Jan-24 05:47:47 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 05:47:47 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:47 LOG4 got_cormsg: From DATATAKING: set dec +252000 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: +252000 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: pnt tr 140000.0 +252000 -CJ 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Jan-24 05:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:47:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 05:48:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Jan-24 05:48:11 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Jan-24 05:48:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Jan-24 05:48:11 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2013-Jan-24 05:48:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 05:48:11 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Jan-24 05:48:11 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Jan-24 05:48:11 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Jan-24 05:48:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:48:11 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Jan-24 05:48:11 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2013-Jan-24 05:48:11 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2013-Jan-24 05:48:11 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Jan-24 05:48:12 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Jan-24 05:48:12 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 05:48:12 LOG3 waittrk: Start waittrk 5 2013-Jan-24 05:48:12 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 05:48:12 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2013-Jan-24 05:48:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 05:48:17 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2013-Jan-24 05:48:17 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 05:48:17 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Jan-24 05:50:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 05:50:51 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2013-Jan-24 05:50:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 05:50:51 INFO2 waittrk: Now tracking galfasrc 2013-Jan-24 05:50:51 LOG4 waittrk: Current telescope position: Az = 214.15 ZA = 8.50 2013-Jan-24 05:50:51 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 05:50:52 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Jan-24 05:50:52 DONE finish_task: DONE finished waiting: telescope on source 2013-Jan-24 05:50:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:50:52 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 05:50:52 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2013-Jan-24 05:50:52 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Jan-24 05:50:52 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Jan-24 05:50:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:50:52 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Jan-24 05:50:52 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Jan-24 05:50:52 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2013-Jan-24 05:50:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2013-Jan-24 05:50:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Jan-24 05:50:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Jan-24 05:50:52 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 05:50:52 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2013-Jan-24 05:50:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 05:50:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 05:50:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:50:52 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 05:50:53 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 05:50:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:50:53 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:50:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 05:50:53 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 05:50:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:50:53 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 05:50:53 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:50:53 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:50:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:50:53 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:50:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 05:50:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:50:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:50:53 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:50:53 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:50:53 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:50:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:50:53 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:50:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:50:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 05:50:53 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2013-Jan-24 05:50:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:50:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:50:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:50:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:50:53 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20130124.a2048.0000.fits' is empty! 2013-Jan-24 05:50:54 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Jan-24 05:50:54 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Jan-24 05:50:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 05:50:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:50:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:50:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:50:54 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2013-Jan-24 05:50:54 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:50:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:50:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:50:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:50:54 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2013-Jan-24 05:50:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Jan-24 05:50:54 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 05:50:54 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Jan-24 05:50:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Jan-24 05:50:54 INFO2 adjust_power: Starting to adjust WAPP power 2013-Jan-24 05:50:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Jan-24 05:50:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Jan-24 05:50:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:50:54 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Jan-24 05:50:54 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2013-Jan-24 05:50:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Jan-24 05:50:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:50:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:50:57 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:50:57 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Jan-24 05:50:57 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2013-Jan-24 05:50:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Jan-24 05:50:57 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 05:50:57 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Jan-24 05:50:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 05:50:57 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:50:57 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:50:57 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:50:57 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:50:57 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Jan-24 05:50:57 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2013-Jan-24 05:50:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Jan-24 05:50:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:50:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 3 6 dB 2013-Jan-24 05:50:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 5 dB --- beam 3: 4 2 dB 2013-Jan-24 05:50:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 7 6 dB 2013-Jan-24 05:50:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Jan-24 05:50:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Jan-24 05:50:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Jan-24 05:50:58 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2013-Jan-24 05:50:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.948 0.917 ALFA beam 1: 0.942 0.966 2013-Jan-24 05:50:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.892 0.879 ALFA beam 3: 0.915 0.966 2013-Jan-24 05:50:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.913 0.915 ALFA beam 5: 1.000 1.065 2013-Jan-24 05:50:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.947 0.919 ALFA beam 7: 1.052 1.102 2013-Jan-24 05:50:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 05:50:58 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Jan-24 05:50:58 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Jan-24 05:50:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:50:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 05:50:58 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2013-Jan-24 05:50:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 05:50:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 05:50:58 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Jan-24 05:50:58 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Jan-24 05:50:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:50:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 05:50:58 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2013-Jan-24 05:50:58 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Jan-24 05:50:58 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:50:58 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 05:50:58 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:50:58 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:50:58 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:50:58 LOG2 antvel: Parameters to Doppler: Topocentric 35457 2013 24 0.0 2013-Jan-24 05:50:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:50:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 05:50:58 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 05:50:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:50:58 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:50:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:50:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:50:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Jan-24 05:50:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:50:59 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2013-Jan-24 05:50:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:50:59 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.657808 2013.0663756749561 18.999933 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 0 14.000000000000002 25.333333333333332 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 1 13.996441406440679 25.238809167622097 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 2 14.003568399196446 25.253942270588055 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 3 14.007180759623964 25.348120096114648 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 4 14.003537188022330 25.428063551713052 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 5 13.996346849331712 25.412417709955861 2013-Jan-24 05:50:59 LOG4 log_alfabeam: ALFABEAM 6 13.992863793036355 25.317349157099571 2013-Jan-24 05:50:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400086 2013-Jan-24 05:50:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:50:59 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2013-Jan-24 05:50:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:50:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:50:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:50:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:50:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:50:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:50:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35460.00 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:51:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:51:08 LOG4 exec_msg: From WAPPWATCH1: log_message ERROR {WAPP1-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Jan-24 05:51:08 ERROR WAPP1-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Jan-24 05:51:08 LOG4 exec_msg: From WAPPWATCH1: wapp_failure 1 2013-Jan-24 05:51:08 LOG5 wapp_failure: Calling 'wapp_failure 1' 2013-Jan-24 05:51:08 ERROR wapp_failure: ERROR WAPP-1 has failed! 2013-Jan-24 05:51:08 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 1 crash' 2013-Jan-24 05:51:08 START begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:08 LOG5 begin_task: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2013-Jan-24 05:51:08 NOTE handle_wapp_failure: Will abort task 'running command file '130124.cmd'' since the WAPP failure preference is set to 'abort'! 2013-Jan-24 05:51:08 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2013-Jan-24 05:51:08 LOG1 task_failed: Task 'handling WAPP failure' failed! 2013-Jan-24 05:51:08 LOG5 task_failed: Level: (5) ID = <10032> Status = 0 0 0 0 ok 2013-Jan-24 05:51:08 WARNING abort_task: WARNING abort requested! 2013-Jan-24 05:51:08 WARNING abort_task: WARNING Aborting handling WAPP failure 2013-Jan-24 05:51:08 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2013-Jan-24 05:51:08 ALERT handle_wapp_failure: Restarting WAPP-1! 2013-Jan-24 05:51:08 NOTE handle_wapp_failure: Stand by for automatic WAPP-1 reconfiguration in 6 seconds! 2013-Jan-24 05:51:08 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2013-Jan-24 05:51:08 LOG5 end_task: Level: (5) ID = <10032> Status = 1 0 0 1 failed 2013-Jan-24 05:51:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'FAILED' 2013-Jan-24 05:51:08 LOG5 end_task: Level: (4) ID = <10031> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 LOG4 stop_backends: Calling 'stop_backends' 2013-Jan-24 05:51:09 START begin_task: Starting task 'stopping the WAPPs' 2013-Jan-24 05:51:09 LOG5 begin_task: Level: (4) ID = <10033> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2013-Jan-24 05:51:09 INFO1 stop_wapp: Stopping the WAPPs 2013-Jan-24 05:51:09 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2013-Jan-24 05:51:09 ERROR send_to_one_wapp: ERROR while sending 'ABORT' to WAPPCON! 2013-Jan-24 05:51:09 ERROR send_to_one_wapp: ERROR message: unable to send message to WAPPCON, ABORT 2013-Jan-24 05:51:09 LOG1 task_failed: Task 'stopping the WAPPs' failed! 2013-Jan-24 05:51:09 LOG5 task_failed: Level: (4) ID = <10033> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2013-Jan-24 05:51:09 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2013-Jan-24 05:51:09 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2013-Jan-24 05:51:09 START begin_task: Starting task 'waiting on stopping WAPPs' 2013-Jan-24 05:51:09 LOG5 begin_task: Level: (5) ID = <10034> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 LOG3 exec_msg: Closing socket 2013-Jan-24 05:51:09 LOG4 exec_msg: From WAPPWATCH2: log_message ERROR {WAPP2-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Jan-24 05:51:09 ERROR WAPP2-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Jan-24 05:51:09 LOG4 exec_msg: From WAPPWATCH3: log_message ERROR {WAPP3-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Jan-24 05:51:09 ERROR WAPP3-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Jan-24 05:51:09 LOG4 exec_msg: From WAPPWATCH2: wapp_failure 2 2013-Jan-24 05:51:09 LOG5 wapp_failure: Calling 'wapp_failure 2' 2013-Jan-24 05:51:09 ERROR wapp_failure: ERROR WAPP-2 has failed! 2013-Jan-24 05:51:09 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 2 crash' 2013-Jan-24 05:51:09 START begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:09 LOG5 begin_task: Level: (6) ID = <10035> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 NOTE handle_wapp_failure: Will abort task 'running command file '130124.cmd'' since the WAPP failure preference is set to 'abort'! 2013-Jan-24 05:51:09 ALERT handle_wapp_failure: Aborting due to WAPP failure! 2013-Jan-24 05:51:09 LOG1 task_failed: Task 'handling WAPP failure' failed! 2013-Jan-24 05:51:09 LOG5 task_failed: Level: (6) ID = <10035> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 WARNING abort_task: WARNING abort requested! 2013-Jan-24 05:51:09 WARNING abort_task: WARNING Aborting wait for handling WAPP failure 2013-Jan-24 05:51:09 ALERT handle_wapp_failure: Restarting WAPP-2! 2013-Jan-24 05:51:09 NOTE handle_wapp_failure: Stand by for automatic WAPP-2 reconfiguration in 6 seconds! 2013-Jan-24 05:51:09 STOP end_task: Finishing task 'handling WAPP failure' with status 'FAILED' 2013-Jan-24 05:51:09 LOG5 end_task: Level: (6) ID = <10035> Status = 1 0 0 1 failed 2013-Jan-24 05:51:09 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2013-Jan-24 05:51:09 LOG5 end_task: Level: (5) ID = <10034> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2013-Jan-24 05:51:10 LOG5 end_task: Level: (4) ID = <10033> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'FAILED' 2013-Jan-24 05:51:10 LOG5 end_task: Level: (3) ID = <10030> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 INFO2 smartfreq: Switching off CAL 2013-Jan-24 05:51:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:51:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:51:10 INFO3 restore_frequencies: Restoring original frequencies 2013-Jan-24 05:51:10 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:51:10 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:51:10 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:51:10 LOG2 antvel: Parameters to Doppler: Topocentric 35468 2013 24 0.0 2013-Jan-24 05:51:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:51:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Jan-24 05:51:10 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Jan-24 05:51:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:51:10 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:51:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:51:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:51:10 STOP finish_task: Finishing task 'smart frequency switching' 2013-Jan-24 05:51:10 LOG5 finish_task: Level: (2) ID = <10020> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 ERROR finish_task: ERROR failed pattern: smart frequency switching 2013-Jan-24 05:51:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Jan-24 05:51:10 END end_task: Finishing task 'smart frequency switching' with status 'FAILED' 2013-Jan-24 05:51:10 LOG5 end_task: Level: (2) ID = <10020> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 ALERT run_command_file: Stopping command file processing at line 20! 2013-Jan-24 05:51:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Jan-24 05:51:10 STOP finish_task: Finishing task 'running command file '130124.cmd'' 2013-Jan-24 05:51:10 LOG5 finish_task: Level: (1) ID = <10002> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 ERROR finish_task: ERROR failed running: command file '130124.cmd' 2013-Jan-24 05:51:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2013-Jan-24 05:51:10 END end_task: Finishing task 'running command file '130124.cmd'' with status 'FAILED' 2013-Jan-24 05:51:10 LOG5 end_task: Level: (1) ID = <10002> Status = 1 0 0 1 failed 2013-Jan-24 05:51:10 LOG4 exec_msg: From WAPPWATCH3: wapp_failure 3 2013-Jan-24 05:51:10 LOG5 wapp_failure: Calling 'wapp_failure 3' 2013-Jan-24 05:51:10 ERROR wapp_failure: ERROR WAPP-3 has failed! 2013-Jan-24 05:51:10 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 3 crash' 2013-Jan-24 05:51:10 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:11 LOG5 begin_task: Level: (1) ID = <10036> Status = 0 0 0 0 ok 2013-Jan-24 05:51:11 ALERT handle_wapp_failure: Restarting WAPP-3! 2013-Jan-24 05:51:11 NOTE handle_wapp_failure: Stand by for automatic WAPP-3 reconfiguration in 6 seconds! 2013-Jan-24 05:51:11 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Jan-24 05:51:11 LOG5 end_task: Level: (1) ID = <10036> Status = 0 0 0 0 ok 2013-Jan-24 05:51:11 LOG3 exec_msg: Closing socket 2013-Jan-24 05:51:11 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:51:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:51:11 LOG4 WAPP=2+3-wappcon: Received command 'ABORT' 2013-Jan-24 05:51:11 ERROR WAPP=4-check_pid: ERROR WAPP process with process-ID 19101 is no longer running! 2013-Jan-24 05:51:11 ERROR WAPP=3-check_pid: ERROR WAPP process with process-ID 16907 is no longer running! 2013-Jan-24 05:51:11 ERROR WAPP=2-check_pid: ERROR WAPP process with process-ID 7093 is no longer running! 2013-Jan-24 05:51:11 LOG4 exec_msg: From WAPPWATCH4: log_message ERROR {WAPP4-wapp_watch} {ERROR WAPP-program 'wapprt' has died!} 2013-Jan-24 05:51:11 ERROR WAPP4-wapp_watch: ERROR WAPP-program 'wapprt' has died! 2013-Jan-24 05:51:11 LOG3 exec_msg: Closing socket 2013-Jan-24 05:51:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:51:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:51:11 LOG4 exec_msg: From WAPPWATCH4: wapp_failure 4 2013-Jan-24 05:51:11 LOG5 wapp_failure: Calling 'wapp_failure 4' 2013-Jan-24 05:51:11 ERROR wapp_failure: ERROR WAPP-4 has failed! 2013-Jan-24 05:51:11 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 crash' 2013-Jan-24 05:51:11 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:11 LOG5 begin_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2013-Jan-24 05:51:11 ALERT handle_wapp_failure: Restarting WAPP-4! 2013-Jan-24 05:51:11 NOTE handle_wapp_failure: Stand by for automatic WAPP-4 reconfiguration in 6 seconds! 2013-Jan-24 05:51:11 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Jan-24 05:51:11 LOG5 end_task: Level: (1) ID = <10037> Status = 0 0 0 0 ok 2013-Jan-24 05:51:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:11 ALERT WAPP=1-wappcon: WAPP1 restarting 2013-Jan-24 05:51:11 LOG3 exec_msg: Closing socket 2013-Jan-24 05:51:12 ALERT WAPP=2-wappcon: WAPP2 restarting 2013-Jan-24 05:51:13 ALERT WAPP=3-wappcon: WAPP3 restarting 2013-Jan-24 05:51:14 ALERT WAPP=4-wappcon: WAPP4 restarting 2013-Jan-24 05:51:14 LOG5 wapp_restart: Calling 'wapp_restart 1' 2013-Jan-24 05:51:14 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:14 LOG5 begin_task: Level: (1) ID = <10038> Status = 0 0 0 0 ok 2013-Jan-24 05:51:14 ALERT wapp_restart: Sending configuration information to WAPP-1 2013-Jan-24 05:51:15 LOG3 sock_errsend: To WAPPCON: TIMEOUT 5 2013-Jan-24 05:51:15 LOG3 sock_errsend: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:15 INFO1 wapp_restart: Configuration information sent to WAPP-1 2013-Jan-24 05:51:15 NOTE wapp_restart: WAPP-1 should be ready now 2013-Jan-24 05:51:15 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Jan-24 05:51:15 LOG5 end_task: Level: (1) ID = <10038> Status = 0 0 0 0 ok 2013-Jan-24 05:51:15 LOG4 WAPP=1-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 05:51:15 LOG4 WAPP=1-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:51:15 LOG5 wapp_restart: Calling 'wapp_restart 2' 2013-Jan-24 05:51:15 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:15 LOG5 begin_task: Level: (1) ID = <10039> Status = 0 0 0 0 ok 2013-Jan-24 05:51:15 ALERT wapp_restart: Sending configuration information to WAPP-2 2013-Jan-24 05:51:15 LOG3 sock_errsend: To WAPPCON2: TIMEOUT 5 2013-Jan-24 05:51:16 LOG3 sock_errsend: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:16 INFO1 wapp_restart: Configuration information sent to WAPP-2 2013-Jan-24 05:51:16 NOTE wapp_restart: WAPP-2 should be ready now 2013-Jan-24 05:51:16 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Jan-24 05:51:16 LOG5 end_task: Level: (1) ID = <10039> Status = 0 0 0 0 ok 2013-Jan-24 05:51:16 LOG4 WAPP=2-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 05:51:16 LOG4 WAPP=2-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:51:17 LOG5 wapp_restart: Calling 'wapp_restart 3' 2013-Jan-24 05:51:17 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:17 LOG5 begin_task: Level: (1) ID = <10040> Status = 0 0 0 0 ok 2013-Jan-24 05:51:17 ALERT wapp_restart: Sending configuration information to WAPP-3 2013-Jan-24 05:51:17 LOG3 sock_errsend: To WAPPCON3: TIMEOUT 5 2013-Jan-24 05:51:17 LOG3 sock_errsend: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:17 INFO1 wapp_restart: Configuration information sent to WAPP-3 2013-Jan-24 05:51:17 NOTE wapp_restart: WAPP-3 should be ready now 2013-Jan-24 05:51:17 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Jan-24 05:51:17 LOG5 end_task: Level: (1) ID = <10040> Status = 0 0 0 0 ok 2013-Jan-24 05:51:17 LOG5 wapp_restart: Calling 'wapp_restart 4' 2013-Jan-24 05:51:17 BEGIN begin_task: Starting task 'handling WAPP failure' 2013-Jan-24 05:51:17 LOG5 begin_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2013-Jan-24 05:51:17 ALERT wapp_restart: Sending configuration information to WAPP-4 2013-Jan-24 05:51:17 LOG3 sock_errsend: To WAPPCON4: TIMEOUT 5 2013-Jan-24 05:51:17 LOG3 sock_errsend: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:17 INFO1 wapp_restart: Configuration information sent to WAPP-4 2013-Jan-24 05:51:17 NOTE wapp_restart: WAPP-4 should be ready now 2013-Jan-24 05:51:17 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2013-Jan-24 05:51:17 LOG5 end_task: Level: (1) ID = <10041> Status = 0 0 0 0 ok 2013-Jan-24 05:51:17 LOG4 WAPP=3+4-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 05:51:17 LOG4 WAPP=3-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:51:18 LOG4 WAPP=4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:51:53 COMMAND CIMA-send_to_exec: Sending command to run command file 2013-Jan-24 05:51:53 LOG4 exec_msg: From OBSERVER: run_command_file 130124.cmd 5 1 32 2013-Jan-24 05:51:53 LOG4 run_command_file: Calling 'run_command_file 130124.cmd 5 1 32' 2013-Jan-24 05:51:53 BEGIN begin_task: Starting task 'running command file '130124.cmd'' 2013-Jan-24 05:51:53 LOG5 begin_task: Level: (1) ID = <10042> Status = 0 0 0 0 ok 2013-Jan-24 05:51:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '130124.cmd' ...} 2013-Jan-24 05:51:53 NOTE run_command_file: Starting execution of command file '130124.cmd' from line 5 2013-Jan-24 05:51:53 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2013-Jan-24 05:51:53 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Jan-24 05:51:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:51:54 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Jan-24 05:51:54 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Jan-24 05:51:54 LOG2 CIMA-antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:51:54 LOG2 CIMA-antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:51:54 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 35513 2013 24 0.0 2013-Jan-24 05:51:54 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Jan-24 05:51:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Jan-24 05:51:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Jan-24 05:51:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:51:56 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Jan-24 05:51:56 LOG5 begin_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2013-Jan-24 05:51:56 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Jan-24 05:51:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Jan-24 05:51:56 LOG1 config_iflo: Receiver ALFA already selected 2013-Jan-24 05:51:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:51:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:51:56 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:51:56 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2013-Jan-24 05:51:56 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:51:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:51:56 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2013-Jan-24 05:51:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:51:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:51:56 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Jan-24 05:51:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Jan-24 05:51:56 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Jan-24 05:51:56 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Jan-24 05:51:56 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 05:51:57 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Jan-24 05:51:57 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Jan-24 05:51:57 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Jan-24 05:51:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:51:57 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Jan-24 05:51:57 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Jan-24 05:51:57 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Jan-24 05:51:57 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Jan-24 05:51:57 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Jan-24 05:51:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Jan-24 05:51:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:51:57 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Jan-24 05:51:57 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:57 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:51:57 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Jan-24 05:51:57 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2013-Jan-24 05:51:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Jan-24 05:51:57 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Jan-24 05:51:57 LOG5 finish_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2013-Jan-24 05:51:57 DONE finish_task: DONE finished configuration: IF/LO path 2013-Jan-24 05:51:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:51:57 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Jan-24 05:51:57 LOG5 end_task: Level: (2) ID = <10043> Status = 0 0 0 0 ok 2013-Jan-24 05:51:57 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Jan-24 05:51:57 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2013-Jan-24 05:51:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Jan-24 05:51:57 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Jan-24 05:51:57 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Jan-24 05:51:57 START begin_task: Starting task 'selecting calibration port' 2013-Jan-24 05:51:57 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2013-Jan-24 05:51:57 LOG3 vw_send: To DATATAKING: calport 3 2013-Jan-24 05:51:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Jan-24 05:51:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:51:58 START begin_task: Starting task 'waiting on calport' 2013-Jan-24 05:51:58 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2013-Jan-24 05:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:58 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Jan-24 05:51:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:58 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:51:58 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Jan-24 05:51:58 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2013-Jan-24 05:51:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Jan-24 05:51:58 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Jan-24 05:51:58 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2013-Jan-24 05:51:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:51:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:51:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:51:58 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2013-Jan-24 05:51:58 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:51:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:51:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:51:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:51:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:51:58 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Jan-24 05:51:58 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Jan-24 05:51:59 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Jan-24 05:51:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:51:59 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Jan-24 05:51:59 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Jan-24 05:51:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:51:59 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2013-Jan-24 05:51:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Jan-24 05:51:59 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:51:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 05:51:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:51:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:51:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:51:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:51:59 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2013-Jan-24 05:51:59 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Jan-24 05:51:59 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Jan-24 05:51:59 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2013-Jan-24 05:51:59 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Jan-24 05:51:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:51:59 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Jan-24 05:51:59 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2013-Jan-24 05:51:59 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2013-Jan-24 05:51:59 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2013-Jan-24 05:51:59 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2013-Jan-24 05:51:59 LOG3 is_if_valid: Current source data: up 213.1 8.3 UP - - 99 0.0 2013-Jan-24 05:51:59 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2013-Jan-24 05:52:00 INFO5 is_if_valid: Condition parsed as: 1 2013-Jan-24 05:52:00 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2013-Jan-24 05:52:00 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2013-Jan-24 05:52:00 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2013-Jan-24 05:52:00 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2013-Jan-24 05:52:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2013-Jan-24 05:52:00 LOG3 track_source: Calling 'track_source galfasrc 140000.0 +252000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2013-Jan-24 05:52:00 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 05:52:00 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2013-Jan-24 05:52:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2013-Jan-24 05:52:00 INFO1 track_source: Starting to track galfasrc 2013-Jan-24 05:52:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2013-Jan-24 05:52:00 LOG3 vw_send: To DATATAKING: set ra 140000.0 2013-Jan-24 05:52:00 LOG3 vw_send: To DATATAKING: set dec +252000 2013-Jan-24 05:52:00 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 05:52:00 LOG3 vw_send: To DATATAKING: pnt tr 140000.0 +252000 -CJ 2013-Jan-24 05:52:00 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Jan-24 05:52:00 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 05:52:00 LOG5 finish_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2013-Jan-24 05:52:00 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 05:52:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:52:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 05:52:00 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2013-Jan-24 05:52:00 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2013-Jan-24 05:52:00 LOG5 finish_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2013-Jan-24 05:52:00 DONE finish_task: DONE finished tracking: source 'galfasrc' 2013-Jan-24 05:52:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:52:00 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2013-Jan-24 05:52:00 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2013-Jan-24 05:52:00 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2013-Jan-24 05:52:00 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2013-Jan-24 05:52:01 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2013-Jan-24 05:52:01 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2013-Jan-24 05:52:01 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2013-Jan-24 05:52:01 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2013-Jan-24 05:52:01 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2013-Jan-24 05:52:01 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2013-Jan-24 05:52:01 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2013-Jan-24 05:52:01 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2013-Jan-24 05:52:01 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2013-Jan-24 05:52:01 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2013-Jan-24 05:52:01 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Jan-24 05:52:01 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Jan-24 05:52:01 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2013-Jan-24 05:52:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Jan-24 05:52:01 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Jan-24 05:52:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Jan-24 05:52:01 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Jan-24 05:52:01 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Jan-24 05:52:01 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2013-Jan-24 05:52:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: set ra 140000.0 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 140000.0 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: set dec +252000 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: +252000 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: pnt tr 140000.0 +252000 -CJ 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Jan-24 05:52:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 05:52:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Jan-24 05:52:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Jan-24 05:52:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Jan-24 05:52:02 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2013-Jan-24 05:52:02 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 05:52:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Jan-24 05:52:02 LOG5 finish_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2013-Jan-24 05:52:02 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Jan-24 05:52:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:52:02 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Jan-24 05:52:02 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2013-Jan-24 05:52:02 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2013-Jan-24 05:52:02 BEGIN begin_task: Starting task 'waiting on telescope' 2013-Jan-24 05:52:02 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2013-Jan-24 05:52:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 05:52:02 LOG3 waittrk: Start waittrk 5 2013-Jan-24 05:52:02 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 05:52:02 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2013-Jan-24 05:52:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 05:52:07 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2013-Jan-24 05:52:07 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 05:52:07 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 05:52:08 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 05:52:08 INFO2 waittrk: Now tracking galfasrc 2013-Jan-24 05:52:08 LOG4 waittrk: Current telescope position: Az = 212.56 ZA = 8.33 2013-Jan-24 05:52:08 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 05:52:08 LOG5 finish_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 DONE finish_task: DONE finished waiting: telescope on source 2013-Jan-24 05:52:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:52:08 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 05:52:08 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Jan-24 05:52:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Jan-24 05:52:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:52:08 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Jan-24 05:52:08 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Jan-24 05:52:08 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2013-Jan-24 05:52:08 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Jan-24 05:52:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Jan-24 05:52:08 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 05:52:08 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 05:52:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 05:52:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:52:08 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 05:52:08 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2013-Jan-24 05:52:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 05:52:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:09 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:52:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 05:52:09 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2013-Jan-24 05:52:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 05:52:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:52:09 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 05:52:09 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:52:09 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2013-Jan-24 05:52:09 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:52:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:52:09 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2013-Jan-24 05:52:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:52:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 05:52:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:52:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:52:09 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:52:09 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2013-Jan-24 05:52:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:09 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:52:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:52:09 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2013-Jan-24 05:52:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:52:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:52:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 05:52:09 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2013-Jan-24 05:52:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:52:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:52:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:52:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:52:09 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20130124.a2048.0000.fits' is empty! 2013-Jan-24 05:52:09 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Jan-24 05:52:09 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Jan-24 05:52:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 05:52:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:52:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:52:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:52:10 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2013-Jan-24 05:52:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:52:10 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:52:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:52:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:52:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:52:10 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2013-Jan-24 05:52:10 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Jan-24 05:52:10 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 05:52:10 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Jan-24 05:52:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Jan-24 05:52:10 INFO2 adjust_power: Starting to adjust WAPP power 2013-Jan-24 05:52:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Jan-24 05:52:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Jan-24 05:52:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:52:10 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Jan-24 05:52:10 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Jan-24 05:52:10 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Jan-24 05:52:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:52:13 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:13 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:52:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Jan-24 05:52:13 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2013-Jan-24 05:52:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Jan-24 05:52:13 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 05:52:13 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2013-Jan-24 05:52:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 05:52:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:52:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:52:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:52:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 05:52:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Jan-24 05:52:13 LOG5 begin_task: Level: (5) ID = <10067> Status = 0 0 0 0 ok 2013-Jan-24 05:52:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Jan-24 05:52:13 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 3 6 dB 2013-Jan-24 05:52:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 4 dB --- beam 3: 4 2 dB 2013-Jan-24 05:52:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 7 6 dB 2013-Jan-24 05:52:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 5 dB 2013-Jan-24 05:52:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Jan-24 05:52:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Jan-24 05:52:14 LOG5 end_task: Level: (5) ID = <10067> Status = 0 0 0 0 ok 2013-Jan-24 05:52:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 0.899 ALFA beam 1: 0.933 0.956 2013-Jan-24 05:52:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.110 1.124 ALFA beam 3: 0.906 0.944 2013-Jan-24 05:52:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.897 0.897 ALFA beam 5: 1.004 1.055 2013-Jan-24 05:52:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.935 0.933 ALFA beam 7: 1.048 0.888 2013-Jan-24 05:52:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 05:52:14 LOG5 finish_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2013-Jan-24 05:52:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Jan-24 05:52:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:52:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 05:52:14 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2013-Jan-24 05:52:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 05:52:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 05:52:14 LOG5 finish_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Jan-24 05:52:14 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Jan-24 05:52:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:52:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 05:52:14 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2013-Jan-24 05:52:14 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Jan-24 05:52:14 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:52:14 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 05:52:14 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:52:14 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:52:14 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:52:14 LOG2 antvel: Parameters to Doppler: Topocentric 35533 2013 24 0.0 2013-Jan-24 05:52:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:52:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 05:52:14 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 05:52:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:52:14 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:52:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:52:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Jan-24 05:52:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:52:14 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2013-Jan-24 05:52:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:52:14 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.678977 2013.0663780832508 18.999933 2013-Jan-24 05:52:14 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333332 2013-Jan-24 05:52:15 LOG4 log_alfabeam: ALFABEAM 1 13.996651853007148 25.237405816512737 2013-Jan-24 05:52:15 LOG4 log_alfabeam: ALFABEAM 2 14.003741657211426 25.255426956225666 2013-Jan-24 05:52:15 LOG4 log_alfabeam: ALFABEAM 3 14.007145322959767 25.351024229722302 2013-Jan-24 05:52:15 LOG4 log_alfabeam: ALFABEAM 4 14.003325443519923 25.429462399925598 2013-Jan-24 05:52:15 LOG4 log_alfabeam: ALFABEAM 5 13.996172513335848 25.410892135554469 2013-Jan-24 05:52:15 LOG4 log_alfabeam: ALFABEAM 6 13.992902941770527 25.314441293246965 2013-Jan-24 05:52:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400087 2013-Jan-24 05:52:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:52:15 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Jan-24 05:52:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:52:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:52:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:52:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35536.00 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:52:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:52:26 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2013-Jan-24 05:52:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:52:26 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2013-Jan-24 05:52:26 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Jan-24 05:52:26 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 05:52:26 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 05:52:26 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:52:26 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:52:26 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:52:26 LOG2 antvel: Parameters to Doppler: Topocentric 35546 2013 24 0.0 2013-Jan-24 05:52:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:52:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 05:52:26 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 05:52:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:52:26 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:52:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:52:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Jan-24 05:52:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:52:27 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2013-Jan-24 05:52:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 05:52:27 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.682598 2013.066378495196 18.999933 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999998 25.333333333333332 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 1 13.996688975379495 25.237169175876382 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 2 14.003771623809623 25.255693824951404 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 3 14.007138465401910 25.351530692854755 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 4 14.003288095073168 25.429698157058827 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 5 13.996142377158421 25.410618031591792 2013-Jan-24 05:52:27 LOG4 log_alfabeam: ALFABEAM 6 13.992910449954122 25.313934465934409 2013-Jan-24 05:52:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400088 2013-Jan-24 05:52:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:52:27 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2013-Jan-24 05:52:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:52:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:52:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 05:52:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35548.00 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:52:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:52:38 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2013-Jan-24 05:52:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:52:38 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2013-Jan-24 05:52:38 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Jan-24 05:52:38 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 05:52:38 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 05:52:38 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:52:38 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:52:38 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:52:38 LOG2 antvel: Parameters to Doppler: Topocentric 35558 2013 24 0.0 2013-Jan-24 05:52:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:52:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 05:52:38 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 05:52:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:52:38 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:52:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:52:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Jan-24 05:52:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:52:38 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Jan-24 05:52:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 05:52:39 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.685940 2013.066378875453 18.999933 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333346 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 1 13.996723532378901 25.236951772755045 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 2 14.003799362015595 25.255943566855482 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 3 14.007131921299639 25.352000617278204 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 4 14.003253328426544 25.429914714266513 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 5 13.996114486571415 25.410361549780053 2013-Jan-24 05:52:39 LOG4 log_alfabeam: ALFABEAM 6 13.992917598497248 25.313464280381478 2013-Jan-24 05:52:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400089 2013-Jan-24 05:52:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:52:39 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2013-Jan-24 05:52:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:52:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:52:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 05:52:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35560.00 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:52:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:52:50 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2013-Jan-24 05:52:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:52:50 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2013-Jan-24 05:52:50 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Jan-24 05:52:50 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 05:52:50 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 05:52:50 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:52:50 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:52:50 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:52:50 LOG2 antvel: Parameters to Doppler: Topocentric 35570 2013 24 0.0 2013-Jan-24 05:52:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:52:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 05:52:50 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 05:52:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:52:50 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:52:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:52:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Jan-24 05:52:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:52:51 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2013-Jan-24 05:52:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 05:52:51 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.689283 2013.06637925571 18.999933 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999993 25.333333333333332 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 1 13.996758383989727 25.236735313379562 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 2 14.003827183935273 25.256196713705091 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 3 14.007125165792338 25.352473055268799 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 4 14.003218266176599 25.430130297807700 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 5 13.996086516298771 25.410101601509705 2013-Jan-24 05:52:51 LOG4 log_alfabeam: ALFABEAM 6 13.992924962369337 25.312991654622611 2013-Jan-24 05:52:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400090 2013-Jan-24 05:52:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:52:51 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2013-Jan-24 05:52:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:52:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:52:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:52:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 05:52:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35572.00 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:53:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:53:02 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2013-Jan-24 05:53:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:53:02 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2013-Jan-24 05:53:02 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Jan-24 05:53:02 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 05:53:02 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 05:53:02 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:53:02 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:53:02 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:53:02 LOG2 antvel: Parameters to Doppler: Topocentric 35581 2013 24 0.0 2013-Jan-24 05:53:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:53:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 05:53:02 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 05:53:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:53:02 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:53:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:53:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Jan-24 05:53:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:53:02 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2013-Jan-24 05:53:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 05:53:03 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.692347 2013.0663796042791 18.999933 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333336 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 1 13.996790577484514 25.236537842876196 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 2 14.003852748472713 25.256431684242362 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 3 14.007118787564139 25.352908137359570 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 4 14.003185878826320 25.430326939188323 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 5 13.996060819456424 25.409860345102629 2013-Jan-24 05:53:03 LOG4 log_alfabeam: ALFABEAM 6 13.992931901436451 25.312556466131969 2013-Jan-24 05:53:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400091 2013-Jan-24 05:53:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:53:03 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2013-Jan-24 05:53:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:53:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:53:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 05:53:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35584.00 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:53:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:53:14 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2013-Jan-24 05:53:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:53:14 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2013-Jan-24 05:53:14 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Jan-24 05:53:14 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 05:53:14 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 05:53:14 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:53:14 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:53:14 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:53:14 LOG2 antvel: Parameters to Doppler: Topocentric 35594 2013 24 0.0 2013-Jan-24 05:53:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:53:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 05:53:14 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 05:53:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:53:14 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:53:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:53:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Jan-24 05:53:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:53:15 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2013-Jan-24 05:53:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 05:53:15 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.695968 2013.0663800162242 18.999933 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333336 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 1 13.996828933284714 25.236305661620413 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 2 14.003883037798973 25.256713040322431 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 3 14.007111016623755 25.353424852538250 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 4 14.003147292975290 25.430558107656108 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 5 13.996030378408324 25.409571496494031 2013-Jan-24 05:53:15 LOG4 log_alfabeam: ALFABEAM 6 13.992940339118766 25.312039707731618 2013-Jan-24 05:53:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400092 2013-Jan-24 05:53:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:53:15 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2013-Jan-24 05:53:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:53:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:53:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 05:53:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35596.00 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:53:17 LOG3 WAPP=2+3-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:53:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:53:26 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2013-Jan-24 05:53:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:53:26 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2013-Jan-24 05:53:26 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Jan-24 05:53:26 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 05:53:26 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 05:53:26 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:53:26 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:53:26 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:53:26 LOG2 antvel: Parameters to Doppler: Topocentric 35606 2013 24 0.0 2013-Jan-24 05:53:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:53:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 05:53:26 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 05:53:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:53:26 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:53:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:53:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Jan-24 05:53:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:53:26 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2013-Jan-24 05:53:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 05:53:27 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.699310 2013.0663803964812 18.999933 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333339 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 1 13.996864632548847 25.236092558340520 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 2 14.003911065610863 25.256976276987665 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 3 14.007103617120038 25.353904180362356 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 4 14.003111380494826 25.430770244128443 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 5 13.996002215129982 25.409301283397756 2013-Jan-24 05:53:27 LOG4 log_alfabeam: ALFABEAM 6 13.992948357732326 25.311560420802703 2013-Jan-24 05:53:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400093 2013-Jan-24 05:53:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:53:27 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2013-Jan-24 05:53:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:53:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:53:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 05:53:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35608.00 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:53:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:53:38 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2013-Jan-24 05:53:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:53:38 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2013-Jan-24 05:53:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Jan-24 05:53:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 05:53:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 05:53:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:53:38 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2013-Jan-24 05:53:38 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:53:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 05:53:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:53:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:53:38 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2013-Jan-24 05:53:38 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Jan-24 05:53:38 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 05:53:38 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 05:53:38 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:53:38 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:53:38 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:53:38 LOG2 antvel: Parameters to Doppler: Topocentric 35618 2013 24 0.0 2013-Jan-24 05:53:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:53:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 05:53:38 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 05:53:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:53:38 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:53:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:53:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Jan-24 05:53:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:53:39 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2013-Jan-24 05:53:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 05:53:39 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.702652 2013.0663807767382 18.999933 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999995 25.333333333333339 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 1 13.996900619454054 25.235880642859474 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 2 14.003939160625263 25.257242960146229 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 3 14.007095996327221 25.354385819957674 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 4 14.003075179545359 25.430981161650319 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 5 13.995973989140529 25.409027565361981 2013-Jan-24 05:53:39 LOG4 log_alfabeam: ALFABEAM 6 13.992956601168302 25.311078901093822 2013-Jan-24 05:53:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400094 2013-Jan-24 05:53:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:53:39 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2013-Jan-24 05:53:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:53:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:53:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35620.00 2013-Jan-24 05:53:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=2-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:53:41 LOG3 WAPP=1+2-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:53:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:53:50 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2013-Jan-24 05:53:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:53:50 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2013-Jan-24 05:53:50 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Jan-24 05:53:50 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 05:53:50 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 05:53:50 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:53:50 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:53:50 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:53:50 LOG2 antvel: Parameters to Doppler: Topocentric 35630 2013 24 0.0 2013-Jan-24 05:53:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:53:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 05:53:50 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 05:53:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:53:50 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:53:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:53:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Jan-24 05:53:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:53:50 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Jan-24 05:53:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 05:53:51 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.705995 2013.0663811569952 18.999933 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999984 25.333333333333350 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 1 13.996936905630809 25.235669898854315 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 2 14.003967329077522 25.257513199947056 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 3 14.007088148862252 25.354869899093014 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 4 14.003038678459493 25.431190875864775 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 5 13.995945694274429 25.408750230436905 2013-Jan-24 05:53:51 LOG4 log_alfabeam: ALFABEAM 6 13.992965074938756 25.310595022314057 2013-Jan-24 05:53:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400095 2013-Jan-24 05:53:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:53:51 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2013-Jan-24 05:53:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:53:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:53:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:53:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:53:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 05:53:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35632.00 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:53:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:54:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:54:02 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2013-Jan-24 05:54:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:54:02 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2013-Jan-24 05:54:02 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Jan-24 05:54:02 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 05:54:02 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 05:54:02 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:54:02 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:54:02 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:54:02 LOG2 antvel: Parameters to Doppler: Topocentric 35642 2013 24 0.0 2013-Jan-24 05:54:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:54:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 05:54:02 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 05:54:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:54:02 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:54:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:54:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Jan-24 05:54:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:54:02 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2013-Jan-24 05:54:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 05:54:03 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.709337 2013.0663815372525 18.999933 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999993 25.333333333333318 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 1 13.996973470043102 25.235460499602752 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 2 14.003995551851149 25.257786863206544 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 3 14.007080076413043 25.355356109806014 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 4 14.003001898430561 25.431399213746616 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 5 13.995917349831782 25.408469416411965 2013-Jan-24 05:54:03 LOG4 log_alfabeam: ALFABEAM 6 13.992973776919500 25.310109093714338 2013-Jan-24 05:54:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400096 2013-Jan-24 05:54:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:54:03 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2013-Jan-24 05:54:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:54:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:54:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:03 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 05:54:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35644.00 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:54:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:54:14 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2013-Jan-24 05:54:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:54:14 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2013-Jan-24 05:54:14 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Jan-24 05:54:14 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 05:54:14 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 05:54:14 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:54:14 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:54:14 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:54:14 LOG2 antvel: Parameters to Doppler: Topocentric 35654 2013 24 0.0 2013-Jan-24 05:54:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:54:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 05:54:14 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 05:54:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:54:14 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:54:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:54:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Jan-24 05:54:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:54:15 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2013-Jan-24 05:54:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 05:54:15 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.712680 2013.0663819175095 18.999933 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999995 25.333333333333336 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 1 13.997010335183161 25.235252367657512 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 2 14.004023843506371 25.258064141872453 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 3 14.007071771137369 25.355844723713744 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 4 14.002964816866786 25.431606251748356 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 5 13.995888941288078 25.408184927453565 2013-Jan-24 05:54:15 LOG4 log_alfabeam: ALFABEAM 6 13.992982715264944 25.309620845257033 2013-Jan-24 05:54:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400097 2013-Jan-24 05:54:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:54:15 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2013-Jan-24 05:54:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:54:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:54:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:15 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 05:54:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35656.00 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:54:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:54:26 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2013-Jan-24 05:54:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:54:26 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2013-Jan-24 05:54:26 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Jan-24 05:54:26 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 05:54:26 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 05:54:26 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:54:26 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:54:26 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:54:26 LOG2 antvel: Parameters to Doppler: Topocentric 35666 2013 24 0.0 2013-Jan-24 05:54:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:54:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 05:54:26 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 05:54:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:54:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:54:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:54:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Jan-24 05:54:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:54:26 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Jan-24 05:54:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 05:54:27 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.716022 2013.0663822977665 18.999933 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999986 25.333333333333329 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 1 13.997047479541786 25.235045676026640 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 2 14.004052184724046 25.258344897872153 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 3 14.007063234992321 25.356335428143229 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 4 14.002927455437538 25.431811817160916 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 5 13.995860488141691 25.407896906373498 2013-Jan-24 05:54:27 LOG4 log_alfabeam: ALFABEAM 6 13.992991887571845 25.309130590806884 2013-Jan-24 05:54:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400098 2013-Jan-24 05:54:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:54:27 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2013-Jan-24 05:54:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:54:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:54:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 05:54:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35668.00 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:54:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:54:38 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2013-Jan-24 05:54:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:54:38 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2013-Jan-24 05:54:38 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Jan-24 05:54:38 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 05:54:38 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 05:54:38 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:54:38 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:54:38 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:54:38 LOG2 antvel: Parameters to Doppler: Topocentric 35678 2013 24 0.0 2013-Jan-24 05:54:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:54:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 05:54:38 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 05:54:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:54:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:54:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:54:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Jan-24 05:54:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:54:39 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2013-Jan-24 05:54:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 05:54:39 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.719365 2013.0663826780235 18.999933 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999995 25.333333333333339 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 1 13.997084925827476 25.234840350160738 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 2 14.004080590005485 25.258629326672128 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 3 14.007054459856603 25.356828495369502 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 4 14.002889791336052 25.432015983508911 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 5 13.995831975934291 25.407605153816487 2013-Jan-24 05:54:39 LOG4 log_alfabeam: ALFABEAM 6 13.993001302271894 25.308638059768619 2013-Jan-24 05:54:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400099 2013-Jan-24 05:54:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:54:39 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2013-Jan-24 05:54:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:54:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:54:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 05:54:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35680.00 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:54:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:54:50 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2013-Jan-24 05:54:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:54:50 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2013-Jan-24 05:54:50 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Jan-24 05:54:50 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 05:54:50 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 05:54:50 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:54:50 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:54:50 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:54:50 LOG2 antvel: Parameters to Doppler: Topocentric 35689 2013 24 0.0 2013-Jan-24 05:54:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:54:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 05:54:50 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 05:54:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:54:50 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:54:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:54:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Jan-24 05:54:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:54:50 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2013-Jan-24 05:54:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 05:54:50 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.722429 2013.0663830265926 18.999933 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999982 25.333333333333336 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 1 13.997119502732243 25.234653456919332 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 2 14.004106671310570 25.258893193221386 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 3 14.007046206811998 25.357282339639788 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 4 14.002855014224282 25.432201784752859 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 5 13.995805801145314 25.407334525523012 2013-Jan-24 05:54:51 LOG4 log_alfabeam: ALFABEAM 6 13.993010144263055 25.308184783750598 2013-Jan-24 05:54:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400100 2013-Jan-24 05:54:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:54:51 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2013-Jan-24 05:54:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:54:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:54:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:54:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:51 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:54:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 05:54:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35692.00 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:54:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:55:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:55:02 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2013-Jan-24 05:55:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:55:02 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2013-Jan-24 05:55:02 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2013-Jan-24 05:55:02 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2013-Jan-24 05:55:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 05:55:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:55:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:55:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:55:02 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Jan-24 05:55:02 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:55:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:55:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:55:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:55:03 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2013-Jan-24 05:55:03 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Jan-24 05:55:03 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Jan-24 05:55:03 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:55:03 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 05:55:03 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:55:03 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:55:03 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:55:03 LOG2 antvel: Parameters to Doppler: Topocentric 35702 2013 24 0.0 2013-Jan-24 05:55:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:55:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 05:55:03 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 05:55:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:55:03 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:55:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:55:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Jan-24 05:55:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:55:03 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2013-Jan-24 05:55:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:55:03 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.726050 2013.0663834385377 18.999933 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999991 25.333333333333329 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 1 13.997160681122676 25.234434241919551 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 2 14.004137548640632 25.259208972253717 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 3 14.007036190930965 25.357821038832135 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 4 14.002813598565600 25.432419672805981 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 5 13.995774819028714 25.407010695426653 2013-Jan-24 05:55:03 LOG4 log_alfabeam: ALFABEAM 6 13.993020859473763 25.307646852352164 2013-Jan-24 05:55:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400101 2013-Jan-24 05:55:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:55:04 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2013-Jan-24 05:55:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:55:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:55:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 05:55:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35705.00 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:55:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:55:15 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2013-Jan-24 05:55:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:55:15 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2013-Jan-24 05:55:15 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Jan-24 05:55:15 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 05:55:15 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 05:55:15 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:55:15 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:55:15 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:55:15 LOG2 antvel: Parameters to Doppler: Topocentric 35715 2013 24 0.0 2013-Jan-24 05:55:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:55:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 05:55:15 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 05:55:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:55:15 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:55:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:55:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Jan-24 05:55:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:55:16 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2013-Jan-24 05:55:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 05:55:16 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.729671 2013.0663838504829 18.999933 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333329 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 1 13.997202201951087 25.234216879448251 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 2 14.004168482070725 25.259529056093907 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 3 14.007025887026449 25.358362255575063 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 4 14.002771839789457 25.432635668454520 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 5 13.995743787112337 25.406682496080087 2013-Jan-24 05:55:16 LOG4 log_alfabeam: ALFABEAM 6 13.993031866208069 25.307106509354238 2013-Jan-24 05:55:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400102 2013-Jan-24 05:55:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:55:16 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2013-Jan-24 05:55:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:55:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:55:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 05:55:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35717.00 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:18 LOG3 WAPP=2+3-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:55:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:55:27 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2013-Jan-24 05:55:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:55:27 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2013-Jan-24 05:55:27 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Jan-24 05:55:27 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 05:55:27 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 05:55:27 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:55:27 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:55:27 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:55:27 LOG2 antvel: Parameters to Doppler: Topocentric 35727 2013 24 0.0 2013-Jan-24 05:55:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:55:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 05:55:27 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 05:55:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:55:27 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:55:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:55:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Jan-24 05:55:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:55:27 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2013-Jan-24 05:55:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 05:55:28 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.733013 2013.0663842307399 18.999933 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999982 25.333333333333321 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 1 13.997240827665363 25.234017965494239 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 2 14.004197078850964 25.259828325589833 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 3 14.007016118160418 25.358863977134749 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 4 14.002732993897858 25.432833285153990 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 5 13.995715105148010 25.406375679855188 2013-Jan-24 05:55:28 LOG4 log_alfabeam: ALFABEAM 6 13.993042286765750 25.306605689774734 2013-Jan-24 05:55:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400103 2013-Jan-24 05:55:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:55:28 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2013-Jan-24 05:55:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:55:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:55:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35729.00 2013-Jan-24 05:55:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:55:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:55:39 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2013-Jan-24 05:55:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:55:39 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2013-Jan-24 05:55:39 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Jan-24 05:55:39 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 05:55:39 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 05:55:39 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:55:39 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:55:39 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:55:39 LOG2 antvel: Parameters to Doppler: Topocentric 35738 2013 24 0.0 2013-Jan-24 05:55:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:55:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 05:55:39 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 05:55:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:55:39 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:55:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:55:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Jan-24 05:55:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:55:39 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Jan-24 05:55:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 05:55:39 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.736077 2013.0663845793088 18.999933 2013-Jan-24 05:55:39 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999991 25.333333333333339 2013-Jan-24 05:55:39 LOG4 log_alfabeam: ALFABEAM 1 13.997276496940067 25.233837078206559 2013-Jan-24 05:55:39 LOG4 log_alfabeam: ALFABEAM 2 14.004223333855430 25.260105968784998 2013-Jan-24 05:55:39 LOG4 log_alfabeam: ALFABEAM 3 14.007006940919652 25.359325800698450 2013-Jan-24 05:55:40 LOG4 log_alfabeam: ALFABEAM 4 14.002697122318107 25.433012952664143 2013-Jan-24 05:55:40 LOG4 log_alfabeam: ALFABEAM 5 13.995688776963364 25.406091070576334 2013-Jan-24 05:55:40 LOG4 log_alfabeam: ALFABEAM 6 13.993052063955979 25.306144774985142 2013-Jan-24 05:55:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400104 2013-Jan-24 05:55:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:55:40 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2013-Jan-24 05:55:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:55:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:55:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 05:55:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35741.00 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:55:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:55:51 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2013-Jan-24 05:55:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:55:51 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2013-Jan-24 05:55:51 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Jan-24 05:55:51 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 05:55:51 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 05:55:51 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:55:51 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06638 J 2013-Jan-24 05:55:51 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:55:51 LOG2 antvel: Parameters to Doppler: Topocentric 35751 2013 24 0.0 2013-Jan-24 05:55:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:55:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 05:55:51 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 05:55:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:55:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:55:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:55:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Jan-24 05:55:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:55:52 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2013-Jan-24 05:55:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 05:55:52 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.739698 2013.0663849912539 18.999933 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 0 14.000000000000000 25.333333333333329 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 1 13.997318966958682 25.233625190380238 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 2 14.004254404262168 25.260438141356317 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 3 14.006995819605494 25.359873813829029 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 4 14.002654412712619 25.433223361098939 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 5 13.995657626260009 25.405750608187368 2013-Jan-24 05:55:52 LOG4 log_alfabeam: ALFABEAM 6 13.993063897230694 25.305597938245022 2013-Jan-24 05:55:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400105 2013-Jan-24 05:55:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:55:52 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2013-Jan-24 05:55:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:55:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:55:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:55:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:55:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 05:55:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35753.00 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:55:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:56:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:56:03 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2013-Jan-24 05:56:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:56:03 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2013-Jan-24 05:56:03 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Jan-24 05:56:03 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 05:56:03 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 05:56:03 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:56:03 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:56:03 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:56:03 LOG2 antvel: Parameters to Doppler: Topocentric 35763 2013 24 0.0 2013-Jan-24 05:56:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:56:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 05:56:03 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 05:56:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:56:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:56:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:56:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Jan-24 05:56:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:56:03 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Jan-24 05:56:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 05:56:04 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.743040 2013.0663853715109 18.999933 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999980 25.333333333333339 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 1 13.997358468831814 25.233431494023179 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 2 14.004283118526304 25.260748645072031 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 3 14.006985287014704 25.360381720922163 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 4 14.002614689268007 25.433415655325124 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 5 13.995628843951097 25.405432398969765 2013-Jan-24 05:56:04 LOG4 log_alfabeam: ALFABEAM 6 13.993075089662314 25.305091216787268 2013-Jan-24 05:56:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400106 2013-Jan-24 05:56:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:56:04 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2013-Jan-24 05:56:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:56:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:56:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 05:56:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35765.00 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:56:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:56:15 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2013-Jan-24 05:56:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:56:15 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2013-Jan-24 05:56:15 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Jan-24 05:56:15 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 05:56:15 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 05:56:15 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:56:15 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:56:15 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:56:15 LOG2 antvel: Parameters to Doppler: Topocentric 35775 2013 24 0.0 2013-Jan-24 05:56:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:56:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 05:56:15 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 05:56:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:56:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:56:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:56:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Jan-24 05:56:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:56:16 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Jan-24 05:56:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 05:56:16 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.746383 2013.0663857517682 18.999933 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999993 25.333333333333336 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 1 13.997398274525786 25.233239586506183 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 2 14.004311874651258 25.261063035472137 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 3 14.006974490690540 25.360891783660282 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 4 14.002574661550344 25.433606124713268 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 5 13.995600025701437 25.405110249271843 2013-Jan-24 05:56:16 LOG4 log_alfabeam: ALFABEAM 6 13.993086548555429 25.304582437373597 2013-Jan-24 05:56:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400107 2013-Jan-24 05:56:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:56:16 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2013-Jan-24 05:56:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:56:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:56:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 05:56:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35777.00 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:56:18 LOG3 WAPP=2+3-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:56:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:56:27 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2013-Jan-24 05:56:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:56:27 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2013-Jan-24 05:56:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Jan-24 05:56:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 05:56:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 05:56:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:56:27 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2013-Jan-24 05:56:27 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:56:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 05:56:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:56:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:56:27 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2013-Jan-24 05:56:27 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Jan-24 05:56:27 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 05:56:27 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 05:56:27 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:56:27 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:56:27 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:56:28 LOG2 antvel: Parameters to Doppler: Topocentric 35787 2013 24 0.0 2013-Jan-24 05:56:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:56:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 05:56:28 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 05:56:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:56:28 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:56:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:56:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Jan-24 05:56:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:56:28 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Jan-24 05:56:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 05:56:28 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.749725 2013.0663861320252 18.999933 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999995 25.333333333333336 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 1 13.997438360009506 25.233049636996501 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 2 14.004340652368906 25.261381147323867 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 3 14.006963434159674 25.361403665541800 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 4 14.002534353764718 25.433794600666459 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 5 13.995571191929015 25.404784329758943 2013-Jan-24 05:56:28 LOG4 log_alfabeam: ALFABEAM 6 13.993098269888254 25.304071937095713 2013-Jan-24 05:56:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400108 2013-Jan-24 05:56:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:56:28 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Jan-24 05:56:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:56:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 05:56:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 05:56:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35789.00 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:56:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:56:39 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2013-Jan-24 05:56:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:56:39 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2013-Jan-24 05:56:39 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Jan-24 05:56:39 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 05:56:39 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 05:56:39 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:56:39 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:56:39 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:56:39 LOG2 antvel: Parameters to Doppler: Topocentric 35799 2013 24 0.0 2013-Jan-24 05:56:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:56:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 05:56:39 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 05:56:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:56:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:56:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:56:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Jan-24 05:56:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:56:40 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2013-Jan-24 05:56:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 05:56:40 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.753068 2013.0663865122822 18.999933 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999995 25.333333333333339 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 1 13.997478748968094 25.232861586697990 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 2 14.004369465768153 25.261703193221777 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 3 14.006952107890340 25.361917640373889 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 4 14.002493742135304 25.433981140817700 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 5 13.995542328624115 25.404454423994444 2013-Jan-24 05:56:40 LOG4 log_alfabeam: ALFABEAM 6 13.993110263488392 25.303559444320214 2013-Jan-24 05:56:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400109 2013-Jan-24 05:56:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:56:40 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Jan-24 05:56:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:56:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 05:56:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 05:56:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35801.00 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:56:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:56:51 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2013-Jan-24 05:56:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:56:51 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2013-Jan-24 05:56:51 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Jan-24 05:56:51 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 05:56:51 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 05:56:51 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:56:51 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:56:51 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:56:51 LOG2 antvel: Parameters to Doppler: Topocentric 35810 2013 24 0.0 2013-Jan-24 05:56:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:56:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 05:56:51 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 05:56:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:56:51 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:56:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:56:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Jan-24 05:56:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:56:51 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Jan-24 05:56:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 05:56:52 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.756132 2013.0663868608513 18.999933 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333332 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 1 13.997516022856635 25.232690996210259 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 2 14.004395895507383 25.262001752397214 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 3 14.006941490376862 25.362390395108669 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 4 14.002456263931080 25.434150315204484 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 5 13.995515858656695 25.404148617856940 2013-Jan-24 05:56:52 LOG4 log_alfabeam: ALFABEAM 6 13.993121494595449 25.303088136969283 2013-Jan-24 05:56:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400110 2013-Jan-24 05:56:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:56:52 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2013-Jan-24 05:56:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:56:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 05:56:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:56:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:56:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 05:56:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35813.00 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:56:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:57:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:57:03 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2013-Jan-24 05:57:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:57:03 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2013-Jan-24 05:57:03 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Jan-24 05:57:03 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 05:57:03 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 05:57:03 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:57:03 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:57:03 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:57:03 LOG2 antvel: Parameters to Doppler: Topocentric 35823 2013 24 0.0 2013-Jan-24 05:57:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:57:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 05:57:03 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 05:57:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:57:03 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:57:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:57:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Jan-24 05:57:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:57:04 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Jan-24 05:57:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 05:57:04 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.759753 2013.0663872727962 18.999933 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999998 25.333333333333336 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 1 13.997560387495989 25.232491631782494 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 2 14.004427152285331 25.262358789605070 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 3 14.006928647975890 25.362951119095065 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 4 14.002411657600046 25.434347966373299 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 5 13.995484561256429 25.403782964157482 2013-Jan-24 05:57:04 LOG4 log_alfabeam: ALFABEAM 6 13.993135064429614 25.302529234677682 2013-Jan-24 05:57:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400111 2013-Jan-24 05:57:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:57:04 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Jan-24 05:57:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:57:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 05:57:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 05:57:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35825.00 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:10 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:57:10.367 (seconds: 21430.367)!} 2013-Jan-24 05:57:10 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:57:10.367 (seconds: 21430.367)! 2013-Jan-24 05:57:11 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 21429.0 to 21430.0! 2013-Jan-24 05:57:12 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (21429.0 - 21431.0)! 2013-Jan-24 05:57:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:57:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:57:15 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2013-Jan-24 05:57:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:57:15 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2013-Jan-24 05:57:15 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Jan-24 05:57:15 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 05:57:15 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 05:57:15 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:57:15 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:57:15 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:57:15 LOG2 antvel: Parameters to Doppler: Topocentric 35835 2013 24 0.0 2013-Jan-24 05:57:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:57:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 05:57:15 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 05:57:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:57:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:57:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:57:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Jan-24 05:57:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:57:15 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2013-Jan-24 05:57:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 05:57:16 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.763095 2013.0663876530534 18.999933 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999989 25.333333333333332 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 1 13.997601635831185 25.232309837993608 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 2 14.004456018790435 25.262692378730844 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 3 14.006916508776429 25.363470550911558 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 4 14.002370186018384 25.434528140457207 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 5 13.995455664026986 25.403441373335749 2013-Jan-24 05:57:16 LOG4 log_alfabeam: ALFABEAM 6 13.993147877103285 25.302011592444874 2013-Jan-24 05:57:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400112 2013-Jan-24 05:57:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:57:16 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2013-Jan-24 05:57:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:57:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 05:57:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:16 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 05:57:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35837.00 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:57:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:57:27 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2013-Jan-24 05:57:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:57:27 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2013-Jan-24 05:57:27 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Jan-24 05:57:27 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 05:57:27 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 05:57:27 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:57:27 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:57:27 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:57:27 LOG2 antvel: Parameters to Doppler: Topocentric 35847 2013 24 0.0 2013-Jan-24 05:57:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:57:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 05:57:27 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 05:57:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:57:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:57:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:57:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Jan-24 05:57:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:57:28 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2013-Jan-24 05:57:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 05:57:28 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.766438 2013.0663880333104 18.999933 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999984 25.333333333333329 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 1 13.997643185864524 25.232130169977474 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 2 14.004484907801249 25.263029988411528 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 3 14.006904088083049 25.363991935991283 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 4 14.002328412549453 25.434706151105953 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 5 13.995426750897181 25.403095713421518 2013-Jan-24 05:57:28 LOG4 log_alfabeam: ALFABEAM 6 13.993160973361430 25.301492102767750 2013-Jan-24 05:57:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400113 2013-Jan-24 05:57:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:57:28 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Jan-24 05:57:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:57:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 05:57:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:28 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35849.00 2013-Jan-24 05:57:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:57:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:57:39 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2013-Jan-24 05:57:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:57:39 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2013-Jan-24 05:57:39 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Jan-24 05:57:39 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 05:57:39 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 05:57:39 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:57:39 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:57:39 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:57:39 LOG2 antvel: Parameters to Doppler: Topocentric 35859 2013 24 0.0 2013-Jan-24 05:57:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:57:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 05:57:39 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 05:57:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:57:39 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:57:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:57:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Jan-24 05:57:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 05:57:39 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2013-Jan-24 05:57:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 05:57:40 LOG5 log_alfabeam: Parameters: 14.0 25.333333333333332 13.769780 2013.0663884135674 18.999933 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 0 13.999999999999991 25.333333333333332 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 1 13.997685011969885 25.231952792283078 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 2 14.004513798568412 25.263371435230532 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 3 14.006891390537902 25.364514923926642 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 4 14.002286363000703 25.434881834531904 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 5 13.995397842741873 25.402746173682285 2013-Jan-24 05:57:40 LOG4 log_alfabeam: ALFABEAM 6 13.993174348039179 25.300971116188030 2013-Jan-24 05:57:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400114 2013-Jan-24 05:57:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 05:57:40 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Jan-24 05:57:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 05:57:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 05:57:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:40 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 05:57:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 35861.00 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 05:57:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 05:57:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 05:57:51 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2013-Jan-24 05:57:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 05:57:51 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2013-Jan-24 05:57:51 INFO2 smartfreq: Switching off CAL 2013-Jan-24 05:57:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:57:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:57:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:57:51 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2013-Jan-24 05:57:51 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:57:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:57:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:57:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:57:51 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2013-Jan-24 05:57:51 INFO3 restore_frequencies: Restoring original frequencies 2013-Jan-24 05:57:51 LOG5 antvel: Calling 'antvel 140000.000000 252000.000000 J Topocentric 0' 2013-Jan-24 05:57:51 LOG2 antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:57:52 LOG2 antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:57:52 LOG2 antvel: Parameters to Doppler: Topocentric 35871 2013 24 0.0 2013-Jan-24 05:57:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:57:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Jan-24 05:57:52 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Jan-24 05:57:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 05:57:52 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 05:57:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:57:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:52 STOP finish_task: Finishing task 'smart frequency switching' 2013-Jan-24 05:57:52 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2013-Jan-24 05:57:52 DONE finish_task: DONE finished pattern: smart frequency switching 2013-Jan-24 05:57:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:57:52 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2013-Jan-24 05:57:52 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2013-Jan-24 05:57:52 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock_cima33.conf' 2013-Jan-24 05:57:52 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Jan-24 05:57:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 05:57:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:57:52 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Jan-24 05:57:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:52 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2013-Jan-24 05:57:52 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2013-Jan-24 05:57:52 LOG2 CIMA-antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06639 J 2013-Jan-24 05:57:52 LOG2 CIMA-antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 05:57:52 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 35872 2013 24 0.0 2013-Jan-24 05:57:52 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Jan-24 05:57:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2013-Jan-24 05:57:54 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2013-Jan-24 05:57:55 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2013-Jan-24 05:57:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2013-Jan-24 05:57:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2013-Jan-24 05:57:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2013-Jan-24 05:57:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2013-Jan-24 05:57:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2013-Jan-24 05:57:57 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:57:57 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Jan-24 05:57:57 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2013-Jan-24 05:57:57 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Jan-24 05:57:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Jan-24 05:57:57 LOG1 config_iflo: Receiver ALFA already selected 2013-Jan-24 05:57:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:57:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:57:57 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:57:57 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2013-Jan-24 05:57:57 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:57:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:57:57 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2013-Jan-24 05:57:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:57:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:57:57 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Jan-24 05:57:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Jan-24 05:57:57 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Jan-24 05:57:57 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Jan-24 05:57:57 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Jan-24 05:57:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:58 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Jan-24 05:57:58 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Jan-24 05:57:58 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Jan-24 05:57:58 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Jan-24 05:57:58 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Jan-24 05:57:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Jan-24 05:57:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:57:58 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Jan-24 05:57:58 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:58 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:57:58 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Jan-24 05:57:58 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2013-Jan-24 05:57:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Jan-24 05:57:58 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Jan-24 05:57:58 LOG5 finish_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2013-Jan-24 05:57:58 DONE finish_task: DONE finished configuration: IF/LO path 2013-Jan-24 05:57:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:57:58 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Jan-24 05:57:58 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2013-Jan-24 05:57:58 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Jan-24 05:57:58 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2013-Jan-24 05:57:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Jan-24 05:57:58 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Jan-24 05:57:58 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Jan-24 05:57:58 START begin_task: Starting task 'selecting calibration port' 2013-Jan-24 05:57:58 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2013-Jan-24 05:57:58 LOG3 vw_send: To DATATAKING: calport 3 2013-Jan-24 05:57:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Jan-24 05:57:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:57:58 START begin_task: Starting task 'waiting on calport' 2013-Jan-24 05:57:58 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Jan-24 05:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:59 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Jan-24 05:57:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:59 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:57:59 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Jan-24 05:57:59 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2013-Jan-24 05:57:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Jan-24 05:57:59 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Jan-24 05:57:59 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2013-Jan-24 05:57:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:57:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:57:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:57:59 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2013-Jan-24 05:57:59 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:57:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:57:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:57:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:57:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:57:59 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Jan-24 05:57:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:58:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:58:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:58:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 05:58:00 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Jan-24 05:58:00 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Jan-24 05:58:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:58:00 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2013-Jan-24 05:58:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Jan-24 05:58:00 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:58:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 05:58:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:58:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 05:58:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:58:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:58:00 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2013-Jan-24 05:58:00 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Jan-24 05:58:00 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Jan-24 05:58:00 LOG5 finish_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2013-Jan-24 05:58:00 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Jan-24 05:58:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:58:00 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Jan-24 05:58:00 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2013-Jan-24 05:58:00 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2013-Jan-24 05:58:00 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2013-Jan-24 05:58:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2013-Jan-24 05:58:00 INFO1 config_mock: Starting to configure the Mock spectrometer 2013-Jan-24 05:58:00 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Jan-24 05:58:00 START begin_task: Starting task 'selecting calibration port' 2013-Jan-24 05:58:00 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2013-Jan-24 05:58:00 LOG3 vw_send: To DATATAKING: calport 3 2013-Jan-24 05:58:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Jan-24 05:58:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:58:00 START begin_task: Starting task 'waiting on calport' 2013-Jan-24 05:58:01 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Jan-24 05:58:01 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Jan-24 05:58:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:58:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:01 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:58:01 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Jan-24 05:58:01 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Jan-24 05:58:01 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Jan-24 05:58:01 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 05:58:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 05:58:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:58:01 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:58:01 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:58:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:58:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:58:01 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Jan-24 05:58:01 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Jan-24 05:58:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 05:58:01 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 05:58:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 05:58:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 05:58:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 05:58:01 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2013-Jan-24 05:58:01 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2013-Jan-24 05:58:01 LOG3 socket_wait: To MOCK: NOP 2013-Jan-24 05:58:01 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2013-Jan-24 05:58:01 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2013-Jan-24 05:58:02 ALERT got_mock_message: Mock spectrometer restarting 2013-Jan-24 05:58:02 LOG4 from_mock: From MOCK: nop ok 2013-Jan-24 05:58:02 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2013-Jan-24 05:58:02 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2013-Jan-24 05:58:02 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2013-Jan-24 05:58:02 LOG2 config_mock: PhilDbg:config_mock b:0 k:a rf:1 flip:-1 2013-Jan-24 05:58:02 LOG2 config_mock: PhilDbg:config_mock b:1 k:b rf:5 flip:-1 2013-Jan-24 05:58:02 LOG2 config_mock: PhilDbg:config_mock b:2 k:c rf:2 flip:-1 2013-Jan-24 05:58:02 LOG2 config_mock: PhilDbg:config_mock b:3 k:d rf:6 flip:-1 2013-Jan-24 05:58:02 LOG2 config_mock: PhilDbg:config_mock b:4 k:e rf:3 flip:-1 2013-Jan-24 05:58:02 LOG2 config_mock: PhilDbg:config_mock b:5 k:f rf:7 flip:-1 2013-Jan-24 05:58:03 LOG2 config_mock: PhilDbg:config_mock b:6 k:g rf:4 flip:-1 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2013-Jan-24 05:58:03 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2013-Jan-24 05:58:03 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2013-Jan-24 05:58:03 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2013-Jan-24 05:58:03 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2013-Jan-24 05:58:03 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2013-Jan-24 05:58:03 LOG4 from_mock: From MOCK: confok 2013-Jan-24 05:58:03 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2013-Jan-24 05:58:03 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2013-Jan-24 05:58:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2013-Jan-24 05:58:03 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2013-Jan-24 05:58:03 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2013-Jan-24 05:58:04 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2013-Jan-24 05:58:04 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Jan-24 05:58:04 LOG4 from_mock: From MOCK: confok 2013-Jan-24 05:58:04 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2013-Jan-24 05:58:04 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2013-Jan-24 05:58:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2013-Jan-24 05:58:04 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2013-Jan-24 05:58:04 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2013-Jan-24 05:58:04 DONE finish_task: DONE finished configuring: the Mock spectrometer 2013-Jan-24 05:58:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 05:58:04 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2013-Jan-24 05:58:04 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2013-Jan-24 05:58:04 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Jan-24 05:58:04 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2013-Jan-24 05:58:04 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2013-Jan-24 05:58:04 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2013-Jan-24 05:58:04 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(NGC5523_p1_076) < 134606 THEN' 2013-Jan-24 05:58:06 LOG3 is_if_valid: Current source data: up 221.7 8.2 UP - - 104 0.7 2013-Jan-24 05:58:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p1_076) < 134606 2013-Jan-24 05:58:06 INFO5 is_if_valid: Condition parsed as: 13.788131666666667 < 13.768333333333334 2013-Jan-24 05:58:06 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(NGC5523_p1_076) < 134606 THEN' 2013-Jan-24 05:58:06 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=222.29 alfaangle=-21.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_076 ra=141000.00 dec=242730.00' 2013-Jan-24 05:58:06 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=222.29 alfaangle=-21.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_076 ra=141000.00 dec=242730.00' in non-true conditional branch 2013-Jan-24 05:58:06 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2013-Jan-24 05:58:06 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(NGC5523_p1_078) < 135821 THEN' 2013-Jan-24 05:58:08 LOG3 is_if_valid: Current source data: up 221.9 8.2 UP - - 104 0.7 2013-Jan-24 05:58:08 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p1_078) < 135821 2013-Jan-24 05:58:08 INFO5 is_if_valid: Condition parsed as: 13.788131666666667 < 13.9725 2013-Jan-24 05:58:08 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=204.92 alfaangle=-3.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_078 ra=141000.00 dec=242430.00' 2013-Jan-24 05:58:08 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Jan-24 05:58:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 05:58:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 204.92 -3.7 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p1_078 141000.00 242430.00 J 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 05:58:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Jan-24 05:58:08 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2013-Jan-24 05:58:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2013-Jan-24 05:58:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Jan-24 05:58:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p1_078} 2013-Jan-24 05:58:08 INFO3 fixed_driftmap: Sending telescope to Az = 204.92 and ZA = 6.63 2013-Jan-24 05:58:08 LOG3 track_source: Calling 'track_source NGC5523_p1_078 204.92 6.6326903291 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 05:58:08 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 05:58:08 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Jan-24 05:58:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p1_078} INFO {Slewing to source 'NGC5523_p1_078' ...} 2013-Jan-24 05:58:09 INFO1 track_source: Starting to track NGC5523_p1_078 2013-Jan-24 05:58:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p1_078" 2013-Jan-24 05:58:09 LOG3 vw_send: To DATATAKING: set ra 204.92 2013-Jan-24 05:58:09 LOG3 vw_send: To DATATAKING: set dec 6.6326903291 2013-Jan-24 05:58:09 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 05:58:09 LOG3 vw_send: To DATATAKING: pnt tr 204.92 6.6326903291 -CF 2013-Jan-24 05:58:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 05:58:09 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 05:58:09 LOG5 finish_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Jan-24 05:58:09 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 05:58:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:58:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 05:58:09 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2013-Jan-24 05:58:09 START begin_task: Starting task 'rotate ALFA to -3.7 degrees' 2013-Jan-24 05:58:09 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2013-Jan-24 05:58:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -3.7 degrees ...} 2013-Jan-24 05:58:09 INFO2 rotate_alfa: ALFA commanded to -3.7 degrees 2013-Jan-24 05:58:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION -3.7 REPLY 2013-Jan-24 05:58:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Jan-24 05:58:09 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Jan-24 05:58:09 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p1_078" 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: set ra 204.92 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: vw% 204.92 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: set dec 6.6326903291 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: 6.6326903291 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: pnt tr 204.92 6.6326903291 -CF 2013-Jan-24 05:58:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 05:58:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 05:58:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Jan-24 05:58:23 INFO3 alfa_motor: ALFA rotator in-position -3.70 degrees 2013-Jan-24 05:58:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Jan-24 05:58:23 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2013-Jan-24 05:58:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 05:58:23 STOP finish_task: Finishing task 'rotate ALFA to -3.7 degrees' 2013-Jan-24 05:58:23 LOG5 finish_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2013-Jan-24 05:58:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to -3.7 degrees 2013-Jan-24 05:58:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:58:23 STOP end_task: Finishing task 'rotate ALFA to -3.7 degrees' with status 'OK' 2013-Jan-24 05:58:23 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2013-Jan-24 05:58:23 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 05:58:23 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2013-Jan-24 05:58:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 05:58:23 LOG3 waittrk: Start waittrk 5 2013-Jan-24 05:58:24 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 05:58:24 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2013-Jan-24 05:58:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 05:58:29 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2013-Jan-24 05:58:29 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 05:58:29 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2013-Jan-24 05:58:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 05:58:43 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2013-Jan-24 05:58:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 05:58:43 INFO2 waittrk: Now tracking NGC5523_p1_078 2013-Jan-24 05:58:43 LOG4 waittrk: Current telescope position: Az = 204.59 ZA = 6.65 2013-Jan-24 05:58:43 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 05:58:43 LOG5 finish_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2013-Jan-24 05:58:43 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 05:58:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 05:58:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 05:58:43 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2013-Jan-24 05:58:43 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 05:58:43 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Jan-24 05:58:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 05:58:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 05:58:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:58:43 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 05:58:43 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Jan-24 05:58:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 05:58:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 05:58:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:44 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 05:58:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 05:58:44 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2013-Jan-24 05:58:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 05:58:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:58:44 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 05:58:44 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:58:44 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2013-Jan-24 05:58:44 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:58:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:58:44 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2013-Jan-24 05:58:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:58:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 05:58:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 05:58:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:58:44 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 05:58:44 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2013-Jan-24 05:58:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 05:58:44 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 05:58:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 05:58:44 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2013-Jan-24 05:58:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 05:58:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 05:58:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 05:58:44 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2013-Jan-24 05:58:44 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2013-Jan-24 05:58:44 INFO2 astwait: Waiting for 604 seconds from 09:58:44 to 10:08:48 UTC ... 2013-Jan-24 05:58:44 LOG4 send_obs_status: To obs_status: <1> TASKTIME 604 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Jan-24 05:58:44 START begin_task: Starting task 'waiting on waiting for AST time' 2013-Jan-24 05:58:44 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2013-Jan-24 06:08:48 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2013-Jan-24 06:08:48 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2013-Jan-24 06:08:48 INFO3 astwait: Finished waiting 2013-Jan-24 06:08:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:08:48 LOG5 dopset_later: Calling 'dopset_later 60.512538403945499' 2013-Jan-24 06:08:48 INFO3 dopset_later: Setting Doppler correction for 06:09:48 (60.5 seconds from now) 2013-Jan-24 06:08:48 LOG5 antvel: Calling 'antvel 204.920000 6.632690 F Heliocentric 60.512538403945499' 2013-Jan-24 06:08:48 LOG2 antvel: Transforming current Az = 204.92 ZA = 6.63 to apparent RA = 14:10:36.4 Dec = +24:20:34.7 2013-Jan-24 06:08:48 LOG2 antvel: Parameters to Doppler: Heliocentric 36588 2013 24 0.0 2013-Jan-24 06:08:48 INFO5 antvel: Computed antenna velocity: -24.08244 km/s 2013-Jan-24 06:08:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.0824387378 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Jan-24 06:08:48 INFO4 dopset_gen: New sky frequencies: 1381.354393 1381.354393 1381.354393 1381.354393 1381.354393 1381.354393 1381.354393 1381.354393 1381.354393 2013-Jan-24 06:08:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.354393 sky0=1381.354393 sky1=1381.354393 sky2=1381.354393 sky3=1381.354393 sky4=1381.354393 sky5=1381.354393 sky6=1381.354393 sky7=1381.354393 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:08:48 LOG2 dopset_gen: Result from 'sky2syn': 1631.354393 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631354393.0} 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:08:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Jan-24 06:08:48 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Jan-24 06:08:48 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:03.0 Dec = +24:24:16.0 2013-Jan-24 06:08:48 LOG3 track_source: Calling 'track_source NGC5523_p1_078 140903.0 242416.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:08:48 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:08:48 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Jan-24 06:08:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p1_078} INFO {Slewing to source 'NGC5523_p1_078' ...} 2013-Jan-24 06:08:48 INFO1 track_source: Starting to track NGC5523_p1_078 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p1_078" 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: set ra 140903.0 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: set dec 242416.0 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: pnt tr 140903.0 242416.0 -CJ 2013-Jan-24 06:08:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:08:48 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:08:48 LOG5 finish_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Jan-24 06:08:48 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:08:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:08:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:08:49 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2013-Jan-24 06:08:49 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 06:08:49 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2013-Jan-24 06:08:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 06:08:49 LOG3 waittrk: Start waittrk 5 2013-Jan-24 06:08:49 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 06:08:49 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631354393.0} 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p1_078" 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: set ra 140903.0 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 140903.0 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: set dec 242416.0 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: 242416.0 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: pnt tr 140903.0 242416.0 -CJ 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:08:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:08:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 06:08:54 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2013-Jan-24 06:08:54 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 06:08:54 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Jan-24 06:08:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 06:08:55 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2013-Jan-24 06:08:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:08:55 INFO2 waittrk: Now tracking NGC5523_p1_078 2013-Jan-24 06:08:55 LOG4 waittrk: Current telescope position: Az = 204.45 ZA = 6.64 2013-Jan-24 06:08:55 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 06:08:55 LOG5 finish_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2013-Jan-24 06:08:55 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 06:08:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:08:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 06:08:55 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2013-Jan-24 06:08:55 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Jan-24 06:08:55 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Jan-24 06:08:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Jan-24 06:08:55 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Jan-24 06:08:55 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Jan-24 06:08:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Jan-24 06:08:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:08:55 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Jan-24 06:08:55 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2013-Jan-24 06:08:56 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Jan-24 06:08:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:08:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:58 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:08:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Jan-24 06:08:58 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2013-Jan-24 06:08:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Jan-24 06:08:58 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 06:08:58 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2013-Jan-24 06:08:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:08:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:08:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:08:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:08:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:08:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Jan-24 06:08:58 LOG5 begin_task: Level: (5) ID = <10163> Status = 0 0 0 0 ok 2013-Jan-24 06:08:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Jan-24 06:08:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:08:59 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 3 5 dB 2013-Jan-24 06:08:59 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 4 dB --- beam 3: 3 2 dB 2013-Jan-24 06:08:59 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 7 dB --- beam 5: 7 6 dB 2013-Jan-24 06:08:59 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Jan-24 06:08:59 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Jan-24 06:08:59 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Jan-24 06:08:59 LOG5 end_task: Level: (5) ID = <10163> Status = 0 0 0 0 ok 2013-Jan-24 06:08:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.925 1.096 ALFA beam 1: 0.893 1.127 2013-Jan-24 06:08:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.092 1.085 ALFA beam 3: 1.109 0.943 2013-Jan-24 06:08:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.118 1.106 ALFA beam 5: 0.981 1.029 2013-Jan-24 06:08:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.937 0.922 ALFA beam 7: 1.039 1.099 2013-Jan-24 06:08:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 06:08:59 LOG5 finish_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2013-Jan-24 06:08:59 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Jan-24 06:08:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:08:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 06:08:59 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2013-Jan-24 06:08:59 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Jan-24 06:08:59 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Jan-24 06:08:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:08:59 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Jan-24 06:08:59 LOG3 socket_wait: To MOCK: ADJP30 2013-Jan-24 06:08:59 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Jan-24 06:08:59 LOG5 begin_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.5 29.4 B 31.6 31.7 mn:A -0.1 -0.3 B -0.4 0.6 gn: 9 11 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.1 29.8 B 29.0 30.7 mn:A 0.5 0.3 B 0.2 -0.3 gn: 10 11 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.8 27.8 B 34.4 29.1 mn:A 0.2 -0.1 B 0.5 0.1 gn: 12 11 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b1s1g0 rms:A 26.1 24.0 B 26.5 26.4 mn:A 0.8 -0.2 B -0.3 0.2 gn: 11 8 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.3 30.4 B 29.8 31.3 mn:A 0.0 -0.5 B -0.0 -0.1 gn: 6 11 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.8 B 29.6 27.5 mn:A 0.1 -0.3 B -0.1 0.4 gn: 6 11 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.3 30.0 B 32.6 29.1 mn:A 0.4 -0.4 B -0.1 -0.2 gn: 11 13 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.1 29.5 B 29.6 30.9 mn:A 0.1 0.3 B 0.2 0.5 gn: 11 13 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.7 29.8 B 28.4 28.5 mn:A -0.5 0.3 B 0.5 -0.1 gn: 4 6 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.9 28.9 B 31.4 30.3 mn:A -0.3 -0.4 B -0.4 -0.2 gn: 6 8 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.2 28.1 B 29.4 29.4 mn:A -0.5 -0.3 B 0.4 -0.2 gn: 8 8 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.2 27.9 B 29.8 29.6 mn:A 0.2 -0.6 B -0.0 0.2 gn: 8 8 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.4 28.4 B 29.4 30.3 mn:A -0.1 -0.8 B -0.1 0.4 gn: 6 12 2013-Jan-24 06:09:05 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.3 29.1 B 29.4 29.7 mn:A 0.2 0.2 B 0.1 -0.2 gn: 7 13 2013-Jan-24 06:09:05 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Jan-24 06:09:05 LOG5 end_task: Level: (5) ID = <10165> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Jan-24 06:09:06 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Jan-24 06:09:06 LOG5 finish_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Jan-24 06:09:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:09:06 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Jan-24 06:09:06 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:09:06 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Jan-24 06:09:06 LOG5 finish_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Jan-24 06:09:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:09:06 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Jan-24 06:09:06 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:09:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:09:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:09:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:09:06 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Jan-24 06:09:06 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Jan-24 06:09:06 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Jan-24 06:09:06 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 06:09:06 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 06:09:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 06:09:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:09:06 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 06:09:06 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2013-Jan-24 06:09:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 06:09:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 06:09:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:09:07 LOG4 got_cormsg: From DATATAKING: vw% DONE 2013-Jan-24 06:09:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 06:09:07 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 06:09:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:09:07 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 06:09:07 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:09:07 LOG5 begin_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:09:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:09:07 LOG5 end_task: Level: (5) ID = <10169> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:09:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 06:09:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:09:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:09:07 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:09:07 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:09:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20130124.a2048.0001.fits 2013-Jan-24 06:09:07 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:09:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:09:07 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:09:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:09:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 06:09:07 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Jan-24 06:09:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 06:09:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 06:09:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:09:07 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2013-Jan-24 06:09:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130124.a2048.0001.fits} 2013-Jan-24 06:09:07 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:09:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 06:09:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:09:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:09:07 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2013-Jan-24 06:09:08 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Jan-24 06:09:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:09:08 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2013-Jan-24 06:09:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Jan-24 06:09:08 LOG5 log_alfabeam: Parameters: 14.150833333333333 24.404444444444444 13.961136 2013.0664101832838 -3.700069 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 0 14.150833333333322 24.404444444444454 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 1 14.151325934517841 24.302622656822898 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 2 14.157058609492614 24.370635688034692 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 3 14.156567854103931 24.472822941754057 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 4 14.150238028926919 24.506501854995065 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 5 14.144577642814509 24.436983004310090 2013-Jan-24 06:09:08 LOG4 log_alfabeam: ALFABEAM 6 14.145174280522991 24.335291064002806 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: object=NGC5523_p1_078 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: scantype=ON 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: patternid=302400101 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: scanid=302400115 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: topoafreqhz=1456354393.0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: topobfreqhz=1306354393.0 2013-Jan-24 06:09:08 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:09:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:09:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p1_078:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=302400101:scanid=302400115:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354393.0:topobfreqhz=1306354393.0:filetype=1 2013-Jan-24 06:09:08 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:09:08 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2013-Jan-24 06:09:08 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:09:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:09:08 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2013-Jan-24 06:09:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:09:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:09:09 LOG3 socket_wait: To MOCK: STAR5 2013-Jan-24 06:09:09 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:09:09 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2013-Jan-24 06:09:09 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:09:09 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:09:09 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2013-Jan-24 06:09:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:09:09 INFO2 take_data: Starting WAPP+Mock 5-second scan: 302400115 2013-Jan-24 06:09:09 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:09:09 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2013-Jan-24 06:09:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:09:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:09:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:09:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Jan-24 06:09:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36550.00 2013-Jan-24 06:09:11 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:09:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Jan-24 06:09:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:09:14.01 2013-Jan-24 06:09:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359022154.01 Thu Jan 24 06:09:14 2013 2013-Jan-24 06:09:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354393 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:09:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:09:20 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:09:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:09:20 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2013-Jan-24 06:09:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:09:20 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2013-Jan-24 06:09:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 06:09:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:09:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:09:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:09:20 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2013-Jan-24 06:09:20 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:09:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:09:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:09:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:09:20 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2013-Jan-24 06:09:20 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Jan-24 06:09:20 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:09:20 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2013-Jan-24 06:09:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Jan-24 06:09:20 LOG5 log_alfabeam: Parameters: 14.150833333333333 24.404444444444444 13.964757 2013.0664105952289 -3.700069 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 0 14.150833333333322 24.404444444444461 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 1 14.151378952598680 24.302673693227526 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 2 14.157076093776057 24.371241919698864 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 3 14.156532061265130 24.473379476199565 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 4 14.150184473805822 24.506441522208920 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 5 14.144560758690671 24.436369896644123 2013-Jan-24 06:09:20 LOG4 log_alfabeam: ALFABEAM 6 14.145210687946534 24.334739575057434 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: object=NGC5523_p1_078 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: patternid=302400101 2013-Jan-24 06:09:20 TEST take_mock_data: PSET configuration: scanid=302400116 2013-Jan-24 06:09:21 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:09:21 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:09:21 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:09:21 TEST take_mock_data: PSET configuration: topoafreqhz=1456354393.0 2013-Jan-24 06:09:21 TEST take_mock_data: PSET configuration: topobfreqhz=1306354393.0 2013-Jan-24 06:09:21 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:09:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:09:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p1_078:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=302400101:scanid=302400116:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354393.0:topobfreqhz=1306354393.0:filetype=1 2013-Jan-24 06:09:21 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:09:21 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2013-Jan-24 06:09:21 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:09:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:09:21 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2013-Jan-24 06:09:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:09:21 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:09:21 LOG3 socket_wait: To MOCK: STAR5 2013-Jan-24 06:09:21 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:09:21 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2013-Jan-24 06:09:21 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:09:21 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:09:21 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2013-Jan-24 06:09:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:09:21 INFO2 take_data: Starting WAPP+Mock 5-second scan: 302400116 2013-Jan-24 06:09:22 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:09:22 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2013-Jan-24 06:09:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:09:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:09:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:09:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Jan-24 06:09:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36563.00 2013-Jan-24 06:09:23 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:09:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Jan-24 06:09:23 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:23 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:09:26 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:09:26.02 2013-Jan-24 06:09:26 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359022166.02 Thu Jan 24 06:09:26 2013 2013-Jan-24 06:09:26 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354393 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Jan-24 06:09:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:09:28 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:28 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:32 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:09:32 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:09:32 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:09:32 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:09:32 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:09:32 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Jan-24 06:09:32 LOG5 finish_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Jan-24 06:09:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:09:32 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Jan-24 06:09:32 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Jan-24 06:09:32 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 204.92 and ZA = 6.63 2013-Jan-24 06:09:32 LOG3 track_source: Calling 'track_source NGC5523_p1_078 204.92 6.6326903291 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:09:32 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:09:32 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p1_078} INFO {Slewing to source 'NGC5523_p1_078' ...} 2013-Jan-24 06:09:32 INFO1 track_source: Starting to track NGC5523_p1_078 2013-Jan-24 06:09:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p1_078" 2013-Jan-24 06:09:32 LOG3 vw_send: To DATATAKING: set ra 204.92 2013-Jan-24 06:09:32 LOG3 vw_send: To DATATAKING: set dec 6.6326903291 2013-Jan-24 06:09:32 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:09:32 LOG3 vw_send: To DATATAKING: pnt tr 204.92 6.6326903291 -CF 2013-Jan-24 06:09:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:09:32 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:09:32 LOG5 finish_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:09:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:09:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:09:32 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2013-Jan-24 06:09:32 LOG1 fixed_driftmap: Parameters: HA = -00:12:14.9 Start = 13:58:21.7 LST = 13:58:05.2 diff = 16.6 secs 2013-Jan-24 06:09:33 INFO2 fixed_driftmap: Waiting 14.6 seconds for RA 14:10:37 2013-Jan-24 06:09:33 INFO2 lstwait: Waiting for 14.5 secs from LST 13:58:05 to LST 13:58:20 ... 2013-Jan-24 06:09:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.520458991146326 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Jan-24 06:09:33 START begin_task: Starting task 'waiting on wait on LST' 2013-Jan-24 06:09:33 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p1_078" 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: set ra 204.92 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: vw% 204.92 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: set dec 6.6326903291 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: 6.6326903291 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr 204.92 6.6326903291 -CF 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:09:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:09:47 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Jan-24 06:09:47 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2013-Jan-24 06:09:47 LOG4 lstwait: Finished waiting 1.48 seconds late 2013-Jan-24 06:09:47 INFO3 lstwait: Finished waiting 2013-Jan-24 06:09:47 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:09:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Jan-24 06:09:47 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Jan-24 06:09:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Jan-24 06:09:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Jan-24 06:09:47 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:09:47 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2013-Jan-24 06:09:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Jan-24 06:09:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: object=NGC5523_p1_078 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: patternid=302400117 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: scanid=302400117 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: topoafreqhz=1456354393.0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: topobfreqhz=1306354393.0 2013-Jan-24 06:09:48 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:09:48 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:09:48 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p1_078:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=302400117:scanid=302400117:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354393.0:topobfreqhz=1306354393.0:filetype=1 2013-Jan-24 06:09:48 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:09:48 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2013-Jan-24 06:09:48 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:09:48 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:09:48 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2013-Jan-24 06:09:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:09:48 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:09:48 LOG3 socket_wait: To MOCK: STAR600 2013-Jan-24 06:09:48 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:09:48 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2013-Jan-24 06:09:48 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:09:48 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:09:48 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2013-Jan-24 06:09:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:09:48 INFO2 take_data: Starting WAPP+Mock 600-second scan: 302400117 2013-Jan-24 06:09:49 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:09:49 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2013-Jan-24 06:09:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:09:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:09:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:09:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Jan-24 06:09:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 36590.00 2013-Jan-24 06:09:50 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:09:50 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Jan-24 06:09:50 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:09:50 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354393 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:09:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354393 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:09:53 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:09:53.01 2013-Jan-24 06:09:53 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359022193.01 Thu Jan 24 06:09:53 2013 2013-Jan-24 06:09:53 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:10:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:10:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:10:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:10:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:10:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:11:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.166 > 2.0)! 2013-Jan-24 06:11:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 1.203 1.211 2.166 2013-Jan-24 06:11:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.887 1.181 1.267 1.090 2013-Jan-24 06:11:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.335 1.317 1.094 1.088 2013-Jan-24 06:11:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.145 1.116 1.258 1.320 2013-Jan-24 06:12:01 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.968 and 1.521 2013-Jan-24 06:12:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:12:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:02 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:14 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:26 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:38 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:13:50 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:14:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:15:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:16:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:17:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:39 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:18:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:19:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:19:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:19:54 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:19:54 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:19:54 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2013-Jan-24 06:19:54 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:19:54 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2013-Jan-24 06:19:54 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Jan-24 06:19:54 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2013-Jan-24 06:19:54 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Jan-24 06:19:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:19:54 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Jan-24 06:19:54 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2013-Jan-24 06:19:54 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2013-Jan-24 06:19:54 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(NGC5523_p1_080) < 141036 THEN' 2013-Jan-24 06:19:56 LOG3 is_if_valid: Current source data: up 184.6 6.0 UP - - 83 0.8 2013-Jan-24 06:19:56 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p1_080) < 141036 2013-Jan-24 06:19:56 INFO5 is_if_valid: Condition parsed as: 14.154683333333333 < 14.176666666666666 2013-Jan-24 06:19:56 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p1_080 ra=141000.00 dec=242130.00' 2013-Jan-24 06:19:56 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Jan-24 06:19:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 06:19:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 180.00 19.1 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p1_080 141000.00 242130.00 J 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:19:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Jan-24 06:19:56 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2013-Jan-24 06:19:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC5523_p1_078' 2013-Jan-24 06:19:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Jan-24 06:19:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p1_080} 2013-Jan-24 06:19:56 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 5.94 2013-Jan-24 06:19:56 LOG3 track_source: Calling 'track_source NGC5523_p1_080 180.00 5.9391774866 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:19:56 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:19:56 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Jan-24 06:19:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p1_080} INFO {Slewing to source 'NGC5523_p1_080' ...} 2013-Jan-24 06:19:57 INFO1 track_source: Starting to track NGC5523_p1_080 2013-Jan-24 06:19:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p1_080" 2013-Jan-24 06:19:57 LOG3 vw_send: To DATATAKING: set ra 180.00 2013-Jan-24 06:19:57 LOG3 vw_send: To DATATAKING: set dec 5.9391774866 2013-Jan-24 06:19:57 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:19:57 LOG3 vw_send: To DATATAKING: pnt tr 180.00 5.9391774866 -CF 2013-Jan-24 06:19:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:19:57 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:19:57 LOG5 finish_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Jan-24 06:19:57 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:19:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:19:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:19:57 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2013-Jan-24 06:19:57 START begin_task: Starting task 'rotate ALFA to +19.1 degrees' 2013-Jan-24 06:19:57 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2013-Jan-24 06:19:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19.1 degrees ...} 2013-Jan-24 06:19:57 INFO2 rotate_alfa: ALFA commanded to +19.1 degrees 2013-Jan-24 06:19:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.1 REPLY 2013-Jan-24 06:19:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Jan-24 06:19:57 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Jan-24 06:19:57 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p1_080" 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: set ra 180.00 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: vw% 180.00 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: set dec 5.9391774866 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: 5.9391774866 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: pnt tr 180.00 5.9391774866 -CF 2013-Jan-24 06:19:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:19:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:20:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Jan-24 06:20:11 INFO3 alfa_motor: ALFA rotator in-position +19.10 degrees 2013-Jan-24 06:20:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Jan-24 06:20:11 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2013-Jan-24 06:20:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:20:11 STOP finish_task: Finishing task 'rotate ALFA to +19.1 degrees' 2013-Jan-24 06:20:11 LOG5 finish_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2013-Jan-24 06:20:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19.1 degrees 2013-Jan-24 06:20:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:20:11 STOP end_task: Finishing task 'rotate ALFA to +19.1 degrees' with status 'OK' 2013-Jan-24 06:20:11 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2013-Jan-24 06:20:11 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 06:20:11 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2013-Jan-24 06:20:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 06:20:11 LOG3 waittrk: Start waittrk 5 2013-Jan-24 06:20:11 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 06:20:11 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2013-Jan-24 06:20:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 06:20:16 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2013-Jan-24 06:20:17 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 06:20:17 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2013-Jan-24 06:21:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 06:21:09 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2013-Jan-24 06:21:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:21:09 INFO2 waittrk: Now tracking NGC5523_p1_080 2013-Jan-24 06:21:09 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 5.96 2013-Jan-24 06:21:09 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 06:21:09 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2013-Jan-24 06:21:09 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 06:21:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 06:21:09 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2013-Jan-24 06:21:09 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 06:21:09 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 06:21:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 06:21:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:21:10 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 06:21:10 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 06:21:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:21:10 LOG4 got_cormsg: From DATATAKING: vw% DONE 2013-Jan-24 06:21:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 06:21:10 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 06:21:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:21:10 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 06:21:10 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:21:10 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:21:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:21:10 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:21:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 06:21:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:21:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:21:10 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:21:10 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:10 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:21:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:21:10 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:21:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:21:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 06:21:10 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2013-Jan-24 06:21:10 LOG5 dopset_later: Calling 'dopset_later 51.403567711595421' 2013-Jan-24 06:21:10 INFO3 dopset_later: Setting Doppler correction for 06:22:00 (51.4 seconds from now) 2013-Jan-24 06:21:10 LOG5 antvel: Calling 'antvel 180.000000 5.939177 F Heliocentric 51.403567711595421' 2013-Jan-24 06:21:10 LOG2 antvel: Transforming current Az = 180.00 ZA = 5.94 to apparent RA = 14:10:36.5 Dec = +24:17:34.7 2013-Jan-24 06:21:10 LOG2 antvel: Parameters to Doppler: Heliocentric 37320 2013 24 0.0 2013-Jan-24 06:21:11 INFO5 antvel: Computed antenna velocity: -24.07605 km/s 2013-Jan-24 06:21:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.0760486185 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Jan-24 06:21:11 INFO4 dopset_gen: New sky frequencies: 1381.354364 1381.354364 1381.354364 1381.354364 1381.354364 1381.354364 1381.354364 1381.354364 1381.354364 2013-Jan-24 06:21:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.354364 sky0=1381.354364 sky1=1381.354364 sky2=1381.354364 sky3=1381.354364 sky4=1381.354364 sky5=1381.354364 sky6=1381.354364 sky7=1381.354364 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:21:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.354364 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631354364.0} 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:21:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Jan-24 06:21:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Jan-24 06:21:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:12.1 Dec = +24:21:15.9 2013-Jan-24 06:21:11 LOG3 track_source: Calling 'track_source NGC5523_p1_080 140912.1 242115.9 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:21:11 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:21:11 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2013-Jan-24 06:21:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p1_080} INFO {Slewing to source 'NGC5523_p1_080' ...} 2013-Jan-24 06:21:11 INFO1 track_source: Starting to track NGC5523_p1_080 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p1_080" 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: set ra 140912.1 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: set dec 242115.9 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: pnt tr 140912.1 242115.9 -CJ 2013-Jan-24 06:21:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:21:11 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:21:11 LOG5 finish_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2013-Jan-24 06:21:11 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:21:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:21:11 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2013-Jan-24 06:21:11 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 06:21:11 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Jan-24 06:21:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 06:21:11 LOG3 waittrk: Start waittrk 5 2013-Jan-24 06:21:11 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 06:21:11 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631354364.0} 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p1_080" 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: set ra 140912.1 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% 140912.1 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: set dec 242115.9 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: 242115.9 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: pnt tr 140912.1 242115.9 -CJ 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:21:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:21:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 06:21:17 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2013-Jan-24 06:21:17 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 06:21:17 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2013-Jan-24 06:21:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 06:21:22 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2013-Jan-24 06:21:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:21:22 INFO2 waittrk: Now tracking NGC5523_p1_080 2013-Jan-24 06:21:22 LOG4 waittrk: Current telescope position: Az = 179.42 ZA = 5.95 2013-Jan-24 06:21:22 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 06:21:22 LOG5 finish_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Jan-24 06:21:22 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 06:21:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 06:21:22 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2013-Jan-24 06:21:22 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Jan-24 06:21:22 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2013-Jan-24 06:21:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Jan-24 06:21:22 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Jan-24 06:21:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Jan-24 06:21:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Jan-24 06:21:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:21:22 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Jan-24 06:21:22 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2013-Jan-24 06:21:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Jan-24 06:21:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:21:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:25 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:21:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Jan-24 06:21:25 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2013-Jan-24 06:21:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Jan-24 06:21:25 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 06:21:25 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2013-Jan-24 06:21:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:21:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:21:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:21:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:21:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:21:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Jan-24 06:21:26 LOG5 begin_task: Level: (5) ID = <10205> Status = 0 0 0 0 ok 2013-Jan-24 06:21:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Jan-24 06:21:26 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 2 6 dB 2013-Jan-24 06:21:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 4 dB --- beam 3: 3 2 dB 2013-Jan-24 06:21:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 7 6 dB 2013-Jan-24 06:21:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Jan-24 06:21:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Jan-24 06:21:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Jan-24 06:21:26 LOG5 end_task: Level: (5) ID = <10205> Status = 0 0 0 0 ok 2013-Jan-24 06:21:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.907 1.095 ALFA beam 1: 1.107 0.899 2013-Jan-24 06:21:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.097 1.103 ALFA beam 3: 1.117 0.946 2013-Jan-24 06:21:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.899 0.870 ALFA beam 5: 0.968 1.032 2013-Jan-24 06:21:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.921 0.925 ALFA beam 7: 1.020 1.098 2013-Jan-24 06:21:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 06:21:26 LOG5 finish_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2013-Jan-24 06:21:26 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Jan-24 06:21:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 06:21:26 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2013-Jan-24 06:21:26 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Jan-24 06:21:26 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Jan-24 06:21:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:21:26 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Jan-24 06:21:26 LOG3 socket_wait: To MOCK: ADJP30 2013-Jan-24 06:21:26 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Jan-24 06:21:26 LOG5 begin_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.1 29.1 B 31.6 31.7 mn:A -0.1 -0.3 B -0.5 0.5 gn: 9 11 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.3 29.0 B 27.8 29.5 mn:A 0.4 0.2 B 0.2 -0.3 gn: 10 11 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.8 27.8 B 30.8 26.1 mn:A -0.2 -0.2 B 0.4 -0.0 gn: 12 10 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.4 29.8 B 29.9 29.9 mn:A 0.7 -0.2 B -0.4 0.2 gn: 14 10 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.4 30.4 B 29.9 31.4 mn:A 0.1 -0.4 B 0.1 -0.0 gn: 6 11 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.6 28.9 B 29.5 27.4 mn:A 0.1 -0.4 B -0.2 0.4 gn: 6 11 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.3 30.0 B 32.7 29.1 mn:A 0.3 -0.4 B -0.1 -0.3 gn: 11 13 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.9 29.2 B 29.3 30.5 mn:A 0.1 0.3 B 0.2 0.5 gn: 11 13 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.7 B 28.4 28.5 mn:A -0.4 0.6 B 0.5 0.0 gn: 4 6 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.1 28.1 B 30.1 29.0 mn:A -0.1 -0.2 B -0.3 -0.0 gn: 6 8 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 27.8 B 29.5 29.5 mn:A -0.4 -0.3 B 0.5 -0.2 gn: 8 8 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.2 30.9 B 28.9 28.6 mn:A 0.2 -0.5 B -0.1 0.3 gn: 9 8 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.0 27.9 B 29.4 30.3 mn:A -0.1 -1.0 B -0.2 0.4 gn: 6 12 2013-Jan-24 06:21:32 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.4 27.5 B 28.6 28.8 mn:A 0.3 0.3 B 0.3 -0.2 gn: 7 13 2013-Jan-24 06:21:32 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Jan-24 06:21:32 LOG5 end_task: Level: (5) ID = <10207> Status = 0 0 0 0 ok 2013-Jan-24 06:21:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Jan-24 06:21:32 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Jan-24 06:21:32 LOG5 finish_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Jan-24 06:21:32 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Jan-24 06:21:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:32 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Jan-24 06:21:32 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2013-Jan-24 06:21:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:21:32 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Jan-24 06:21:32 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2013-Jan-24 06:21:32 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Jan-24 06:21:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:33 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Jan-24 06:21:33 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2013-Jan-24 06:21:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:21:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:21:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:21:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:21:33 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Jan-24 06:21:33 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Jan-24 06:21:33 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Jan-24 06:21:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Jan-24 06:21:33 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 06:21:33 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2013-Jan-24 06:21:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 06:21:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 06:21:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:21:33 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 06:21:33 LOG5 begin_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2013-Jan-24 06:21:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 06:21:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 06:21:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:21:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:33 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:21:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 06:21:33 LOG5 end_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2013-Jan-24 06:21:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 06:21:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:21:33 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 06:21:33 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:21:33 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2013-Jan-24 06:21:33 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:21:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:21:33 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:21:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 06:21:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:21:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:21:34 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:21:34 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20130124.a2048.0002.fits 2013-Jan-24 06:21:34 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:21:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:21:34 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:21:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:21:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 06:21:34 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Jan-24 06:21:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 06:21:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 06:21:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:21:34 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130124.a2048.0002.fits} 2013-Jan-24 06:21:34 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:21:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 06:21:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:21:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:21:34 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Jan-24 06:21:34 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:21:34 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2013-Jan-24 06:21:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Jan-24 06:21:34 LOG5 log_alfabeam: Parameters: 14.153361111111114 24.354416666666665 14.169204 2013.0664338542854 19.099895 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 0 14.153361111111197 24.354416666666662 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 1 14.154704601952240 24.249882498593713 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 2 14.159676931377245 24.320008011352638 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 3 14.158410781735137 24.424757356107680 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 4 14.151970965975554 24.458889877614823 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 5 14.146969113560662 24.387500911530196 2013-Jan-24 06:21:34 LOG4 log_alfabeam: ALFABEAM 6 14.148436250624147 24.283260169431163 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: object=NGC5523_p1_080 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: scantype=ON 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: patternid=302400117 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: scanid=302400118 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: topoafreqhz=1456354364.0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: topobfreqhz=1306354364.0 2013-Jan-24 06:21:35 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:21:35 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:21:35 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p1_080:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=302400117:scanid=302400118:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354364.0:topobfreqhz=1306354364.0:filetype=1 2013-Jan-24 06:21:35 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:21:35 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2013-Jan-24 06:21:35 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:21:35 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:21:35 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2013-Jan-24 06:21:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:21:35 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:21:35 LOG3 socket_wait: To MOCK: STAR5 2013-Jan-24 06:21:35 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:21:35 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2013-Jan-24 06:21:35 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:21:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:21:35 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2013-Jan-24 06:21:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:21:35 INFO2 take_data: Starting WAPP+Mock 5-second scan: 302400118 2013-Jan-24 06:21:36 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:21:36 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2013-Jan-24 06:21:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:21:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:21:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:21:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37297.00 2013-Jan-24 06:21:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Jan-24 06:21:37 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2013-Jan-24 06:21:37 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:21:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Jan-24 06:21:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Jan-24 06:21:37 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:40 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:21:40.01 2013-Jan-24 06:21:40 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359022900.01 Thu Jan 24 06:21:40 2013 2013-Jan-24 06:21:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354364 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:21:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:21:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:21:46 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:21:46 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:21:46 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2013-Jan-24 06:21:46 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:21:46 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2013-Jan-24 06:21:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 06:21:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:21:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:21:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:21:46 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2013-Jan-24 06:21:46 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:21:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:21:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:21:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:21:46 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2013-Jan-24 06:21:46 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Jan-24 06:21:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:21:46 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Jan-24 06:21:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Jan-24 06:21:46 LOG5 log_alfabeam: Parameters: 14.153361111111114 24.354416666666665 14.172547 2013.0664342345424 19.099895 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 0 14.153361111111241 24.354416666666665 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 1 14.154765903599905 24.250033204809355 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 2 14.159696952763765 24.320701852644589 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 3 14.158369288441570 24.425308933481826 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 4 14.151909608339270 24.458734060241046 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 5 14.146949907257474 24.386798938265144 2013-Jan-24 06:21:46 LOG4 log_alfabeam: ALFABEAM 6 14.148478176819234 24.282722411913827 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: object=NGC5523_p1_080 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: patternid=302400117 2013-Jan-24 06:21:46 TEST take_mock_data: PSET configuration: scanid=302400119 2013-Jan-24 06:21:47 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:21:47 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:21:47 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:21:47 TEST take_mock_data: PSET configuration: topoafreqhz=1456354364.0 2013-Jan-24 06:21:47 TEST take_mock_data: PSET configuration: topobfreqhz=1306354364.0 2013-Jan-24 06:21:47 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:21:47 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:21:47 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p1_080:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=302400117:scanid=302400119:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354364.0:topobfreqhz=1306354364.0:filetype=1 2013-Jan-24 06:21:47 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:21:47 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2013-Jan-24 06:21:47 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:21:47 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:21:47 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2013-Jan-24 06:21:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:21:47 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:21:47 LOG3 socket_wait: To MOCK: STAR5 2013-Jan-24 06:21:47 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:21:47 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2013-Jan-24 06:21:47 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:21:47 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:21:47 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2013-Jan-24 06:21:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:21:47 INFO2 take_data: Starting WAPP+Mock 5-second scan: 302400119 2013-Jan-24 06:21:48 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:21:48 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2013-Jan-24 06:21:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:21:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:21:48 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:21:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Jan-24 06:21:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37309.00 2013-Jan-24 06:21:49 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:21:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Jan-24 06:21:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:21:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:21:52.02 2013-Jan-24 06:21:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359022912.02 Thu Jan 24 06:21:52 2013 2013-Jan-24 06:21:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354364 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:21:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:21:54 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Jan-24 06:21:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:21:54 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:21:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:21:58 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:21:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:21:58 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:21:58 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:21:58 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Jan-24 06:21:58 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Jan-24 06:21:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:58 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Jan-24 06:21:58 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Jan-24 06:21:58 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 180.00 and ZA = 5.94 2013-Jan-24 06:21:58 LOG3 track_source: Calling 'track_source NGC5523_p1_080 180.00 5.9391774866 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:21:58 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:21:58 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p1_080} INFO {Slewing to source 'NGC5523_p1_080' ...} 2013-Jan-24 06:21:58 INFO1 track_source: Starting to track NGC5523_p1_080 2013-Jan-24 06:21:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p1_080" 2013-Jan-24 06:21:58 LOG3 vw_send: To DATATAKING: set ra 180.00 2013-Jan-24 06:21:58 LOG3 vw_send: To DATATAKING: set dec 5.9391774866 2013-Jan-24 06:21:58 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:21:58 LOG3 vw_send: To DATATAKING: pnt tr 180.00 5.9391774866 -CF 2013-Jan-24 06:21:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:21:58 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:21:58 LOG5 finish_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:21:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:21:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:21:58 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2013-Jan-24 06:21:58 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 14:10:36.6 LST = 14:10:33.2 diff = 3.4 secs 2013-Jan-24 06:21:58 INFO2 fixed_driftmap: Waiting 1.4 seconds for RA 14:10:37 2013-Jan-24 06:21:59 INFO2 lstwait: Waiting for 1.4 secs from LST 14:10:33 to LST 14:10:35 ... 2013-Jan-24 06:21:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1.4084481243947391 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Jan-24 06:21:59 START begin_task: Starting task 'waiting on wait on LST' 2013-Jan-24 06:21:59 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p1_080" 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: set ra 180.00 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: vw% 180.00 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: set dec 5.9391774866 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: 5.9391774866 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: pnt tr 180.00 5.9391774866 -CF 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:21:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:22:00 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Jan-24 06:22:00 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2013-Jan-24 06:22:00 LOG4 lstwait: Finished waiting 1.60 seconds late 2013-Jan-24 06:22:00 INFO3 lstwait: Finished waiting 2013-Jan-24 06:22:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:22:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Jan-24 06:22:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Jan-24 06:22:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Jan-24 06:22:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Jan-24 06:22:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:22:00 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2013-Jan-24 06:22:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Jan-24 06:22:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Jan-24 06:22:00 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:22:00 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:22:00 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:22:00 TEST take_mock_data: PSET configuration: object=NGC5523_p1_080 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: patternid=302400120 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: scanid=302400120 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: topoafreqhz=1456354364.0 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: topobfreqhz=1306354364.0 2013-Jan-24 06:22:01 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:22:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:22:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p1_080:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=302400120:scanid=302400120:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456354364.0:topobfreqhz=1306354364.0:filetype=1 2013-Jan-24 06:22:01 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:22:01 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2013-Jan-24 06:22:01 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:22:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:22:01 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2013-Jan-24 06:22:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:22:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:22:01 LOG3 socket_wait: To MOCK: STAR600 2013-Jan-24 06:22:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:22:01 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2013-Jan-24 06:22:01 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:22:01 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:22:01 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2013-Jan-24 06:22:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:22:01 INFO2 take_data: Starting WAPP+Mock 600-second scan: 302400120 2013-Jan-24 06:22:02 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:22:02 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2013-Jan-24 06:22:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:22:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:22:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:22:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Jan-24 06:22:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 37323.00 2013-Jan-24 06:22:03 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:22:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Jan-24 06:22:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:22:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.354364 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:22:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:22:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.354364 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:22:04 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2013-Jan-24 06:22:06 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:22:06.01 2013-Jan-24 06:22:06 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359022926.01 Thu Jan 24 06:22:06 2013 2013-Jan-24 06:22:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:22:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:16 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2013-Jan-24 06:22:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:22:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:23:52 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:04 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:16 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:28 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:40 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:24:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:25:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:26:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:08 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 06:27:08.297 (seconds: 23228.297)!} 2013-Jan-24 06:27:08 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 06:27:08.297 (seconds: 23228.297)! 2013-Jan-24 06:27:09 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 23227.0 to 23228.0! 2013-Jan-24 06:27:10 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (23227.0 - 23229.0)! 2013-Jan-24 06:27:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:27:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:28:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:30:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:31:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:32:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:32:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:32:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:32:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): ADC >= 4096 errors 2013-Jan-24 06:32:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:32:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:32:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:32:07 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:32:07 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:32:07 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2013-Jan-24 06:32:07 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:32:07 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2013-Jan-24 06:32:07 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Jan-24 06:32:07 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2013-Jan-24 06:32:07 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Jan-24 06:32:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:32:07 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Jan-24 06:32:07 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2013-Jan-24 06:32:07 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2013-Jan-24 06:32:07 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(NGC5523_p2_002) < 142250 THEN' 2013-Jan-24 06:32:09 LOG3 is_if_valid: Current source data: up 163.9 8.2 UP - - 68 0.9 2013-Jan-24 06:32:09 INFO5 is_if_valid: Evaluating condition: LSTSLEW(NGC5523_p2_002) < 142250 2013-Jan-24 06:32:09 INFO5 is_if_valid: Condition parsed as: 14.360519 < 14.380555555555556 2013-Jan-24 06:32:09 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=160.81 alfaangle=36.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=600 source=NGC5523_p2_002 ra=141000.00 dec=261830.00' 2013-Jan-24 06:32:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2013-Jan-24 06:32:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 06:32:09 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 600 160.81 36.7 hcorcal 5 tracking no off lcorcal first 1 NGC5523_p2_002 141000.00 261830.00 J 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:32:09 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2013-Jan-24 06:32:09 LOG5 begin_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2013-Jan-24 06:32:09 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'NGC5523_p1_080' 2013-Jan-24 06:32:09 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2013-Jan-24 06:32:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {NGC5523_p2_002} 2013-Jan-24 06:32:09 INFO3 fixed_driftmap: Sending telescope to Az = 160.81 and ZA = 8.38 2013-Jan-24 06:32:09 LOG3 track_source: Calling 'track_source NGC5523_p2_002 160.81 8.3811270618 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:32:09 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:32:10 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Jan-24 06:32:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_002} INFO {Slewing to source 'NGC5523_p2_002' ...} 2013-Jan-24 06:32:10 INFO1 track_source: Starting to track NGC5523_p2_002 2013-Jan-24 06:32:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_002" 2013-Jan-24 06:32:10 LOG3 vw_send: To DATATAKING: set ra 160.81 2013-Jan-24 06:32:10 LOG3 vw_send: To DATATAKING: set dec 8.3811270618 2013-Jan-24 06:32:10 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:32:10 LOG3 vw_send: To DATATAKING: pnt tr 160.81 8.3811270618 -CF 2013-Jan-24 06:32:10 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:32:10 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:32:10 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Jan-24 06:32:10 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:32:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:32:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:32:10 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2013-Jan-24 06:32:10 START begin_task: Starting task 'rotate ALFA to +36.7 degrees' 2013-Jan-24 06:32:10 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Jan-24 06:32:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +36.7 degrees ...} 2013-Jan-24 06:32:10 INFO2 rotate_alfa: ALFA commanded to +36.7 degrees 2013-Jan-24 06:32:10 LOG3 sock_errsend: To ALFAMOTOR: POSITION 36.7 REPLY 2013-Jan-24 06:32:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Jan-24 06:32:10 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Jan-24 06:32:10 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_002" 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: set ra 160.81 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: vw% 160.81 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: set dec 8.3811270618 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: 8.3811270618 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:32:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:32:11 LOG4 got_cormsg: From DATATAKING: pnt tr 160.81 8.3811270618 -CF 2013-Jan-24 06:32:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:32:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:32:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Jan-24 06:32:21 INFO3 alfa_motor: ALFA rotator in-position +36.70 degrees 2013-Jan-24 06:32:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Jan-24 06:32:21 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2013-Jan-24 06:32:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:32:21 STOP finish_task: Finishing task 'rotate ALFA to +36.7 degrees' 2013-Jan-24 06:32:21 LOG5 finish_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Jan-24 06:32:21 INFO2 finish_task: DONE finished configuration: rotating ALFA to +36.7 degrees 2013-Jan-24 06:32:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:32:21 STOP end_task: Finishing task 'rotate ALFA to +36.7 degrees' with status 'OK' 2013-Jan-24 06:32:21 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2013-Jan-24 06:32:21 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 06:32:21 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2013-Jan-24 06:32:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 06:32:21 LOG3 waittrk: Start waittrk 5 2013-Jan-24 06:32:21 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 06:32:22 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2013-Jan-24 06:32:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 06:32:27 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2013-Jan-24 06:32:27 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 06:32:27 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2013-Jan-24 06:33:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 06:33:18 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2013-Jan-24 06:33:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:33:18 INFO2 waittrk: Now tracking NGC5523_p2_002 2013-Jan-24 06:33:18 LOG4 waittrk: Current telescope position: Az = 160.58 ZA = 8.40 2013-Jan-24 06:33:18 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 06:33:18 LOG5 finish_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2013-Jan-24 06:33:18 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 06:33:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:33:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 06:33:18 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 06:33:19 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 06:33:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 06:33:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:33:19 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 06:33:19 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 06:33:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:33:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:19 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:33:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 06:33:19 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 06:33:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:33:19 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 06:33:19 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:33:19 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:33:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:33:19 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:33:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 06:33:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:33:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:33:19 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:33:19 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:19 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:33:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:33:19 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2013-Jan-24 06:33:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:33:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:33:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 06:33:19 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2013-Jan-24 06:33:20 LOG5 dopset_later: Calling 'dopset_later 53.861780471117257' 2013-Jan-24 06:33:20 INFO3 dopset_later: Setting Doppler correction for 06:34:13 (53.9 seconds from now) 2013-Jan-24 06:33:20 LOG5 antvel: Calling 'antvel 160.810000 8.381127 F Heliocentric 53.861780471117257' 2013-Jan-24 06:33:20 LOG2 antvel: Transforming current Az = 160.81 ZA = 8.38 to apparent RA = 14:10:36.1 Dec = +26:14:34.2 2013-Jan-24 06:33:20 LOG2 antvel: Parameters to Doppler: Heliocentric 38053 2013 24 0.0 2013-Jan-24 06:33:20 INFO5 antvel: Computed antenna velocity: -23.41745 km/s 2013-Jan-24 06:33:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-23.4174490493 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2013-Jan-24 06:33:20 INFO4 dopset_gen: New sky frequencies: 1381.351329 1381.351329 1381.351329 1381.351329 1381.351329 1381.351329 1381.351329 1381.351329 1381.351329 2013-Jan-24 06:33:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.351329 sky0=1381.351329 sky1=1381.351329 sky2=1381.351329 sky3=1381.351329 sky4=1381.351329 sky5=1381.351329 sky6=1381.351329 sky7=1381.351329 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:33:20 LOG2 dopset_gen: Result from 'sky2syn': 1631.351329 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631351329.0} 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:33:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2013-Jan-24 06:33:20 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2013-Jan-24 06:33:20 INFO5 fixed_driftmap: Tracking J2000 position: RA = 14:09:09.6 Dec = +26:18:15.4 2013-Jan-24 06:33:20 LOG3 track_source: Calling 'track_source NGC5523_p2_002 140909.6 261815.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:33:20 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:33:20 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2013-Jan-24 06:33:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_002} INFO {Slewing to source 'NGC5523_p2_002' ...} 2013-Jan-24 06:33:20 INFO1 track_source: Starting to track NGC5523_p2_002 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_002" 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: set ra 140909.6 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: set dec 261815.4 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: pnt tr 140909.6 261815.4 -CJ 2013-Jan-24 06:33:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:33:20 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:33:20 LOG5 finish_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2013-Jan-24 06:33:20 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:33:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:33:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:33:20 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2013-Jan-24 06:33:20 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 06:33:20 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2013-Jan-24 06:33:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 06:33:21 LOG3 waittrk: Start waittrk 5 2013-Jan-24 06:33:21 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 06:33:21 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631351329.0} 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_002" 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: set ra 140909.6 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% 140909.6 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: set dec 261815.4 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: 261815.4 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: pnt tr 140909.6 261815.4 -CJ 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:33:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:33:26 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 06:33:26 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2013-Jan-24 06:33:26 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 06:33:26 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2013-Jan-24 06:33:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 06:33:27 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2013-Jan-24 06:33:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:33:27 INFO2 waittrk: Now tracking NGC5523_p2_002 2013-Jan-24 06:33:27 LOG4 waittrk: Current telescope position: Az = 160.44 ZA = 8.40 2013-Jan-24 06:33:27 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 06:33:27 LOG5 finish_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2013-Jan-24 06:33:27 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 06:33:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:33:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 06:33:27 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2013-Jan-24 06:33:27 START begin_task: Starting task 'adjusting WAPP+Mock power' 2013-Jan-24 06:33:27 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2013-Jan-24 06:33:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2013-Jan-24 06:33:27 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2013-Jan-24 06:33:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Jan-24 06:33:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Jan-24 06:33:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:33:27 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Jan-24 06:33:27 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2013-Jan-24 06:33:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Jan-24 06:33:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:33:30 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:30 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:33:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Jan-24 06:33:30 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2013-Jan-24 06:33:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Jan-24 06:33:30 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 06:33:30 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2013-Jan-24 06:33:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:33:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:33:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:33:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:33:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:33:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Jan-24 06:33:31 LOG5 begin_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2013-Jan-24 06:33:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Jan-24 06:33:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 3 6 dB 2013-Jan-24 06:33:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 4 dB --- beam 3: 4 2 dB 2013-Jan-24 06:33:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 7 dB --- beam 5: 7 6 dB 2013-Jan-24 06:33:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2013-Jan-24 06:33:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Jan-24 06:33:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Jan-24 06:33:31 LOG5 end_task: Level: (5) ID = <10247> Status = 0 0 0 0 ok 2013-Jan-24 06:33:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.920 1.118 ALFA beam 1: 0.917 0.935 2013-Jan-24 06:33:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.898 1.115 ALFA beam 3: 0.882 0.949 2013-Jan-24 06:33:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.115 1.110 ALFA beam 5: 0.970 1.052 2013-Jan-24 06:33:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.925 0.938 ALFA beam 7: 1.026 1.116 2013-Jan-24 06:33:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 06:33:31 LOG5 finish_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2013-Jan-24 06:33:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Jan-24 06:33:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:33:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 06:33:31 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2013-Jan-24 06:33:31 START begin_task: Starting task 'adjusting Mock spectrometer power' 2013-Jan-24 06:33:31 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2013-Jan-24 06:33:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:33:32 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2013-Jan-24 06:33:32 LOG3 socket_wait: To MOCK: ADJP30 2013-Jan-24 06:33:32 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2013-Jan-24 06:33:32 LOG5 begin_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.4 29.3 B 28.6 28.7 mn:A -0.2 -0.4 B -0.5 0.5 gn: 9 10 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b0s1g0 rms:A 27.6 26.4 B 28.0 29.7 mn:A 0.5 0.3 B 0.2 -0.3 gn: 9 11 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.3 28.3 B 31.6 26.7 mn:A 0.0 -0.2 B 0.4 0.1 gn: 12 10 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.5 27.1 B 30.7 30.7 mn:A 0.8 -0.2 B -0.2 0.3 gn: 13 10 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 31.0 B 30.4 31.9 mn:A -0.0 -0.5 B 0.1 -0.1 gn: 6 11 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.2 29.5 B 29.9 27.7 mn:A 0.1 -0.4 B -0.1 0.4 gn: 6 11 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.6 30.3 B 32.8 29.2 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 11 13 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b3s1g0 rms:A 27.0 26.3 B 29.4 30.7 mn:A 0.2 0.4 B 0.3 0.5 gn: 10 13 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.7 29.8 B 28.5 28.6 mn:A -0.4 0.5 B 0.5 0.0 gn: 4 6 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.1 28.1 B 30.2 29.2 mn:A -0.2 -0.3 B -0.3 -0.2 gn: 6 8 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.0 27.9 B 29.7 29.7 mn:A -0.5 -0.2 B 0.4 -0.2 gn: 8 8 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b5s1g0 rms:A 27.9 27.6 B 29.2 29.0 mn:A 0.2 -0.5 B -0.1 0.3 gn: 8 8 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.1 28.0 B 29.7 30.6 mn:A -0.1 -0.7 B -0.2 0.4 gn: 6 12 2013-Jan-24 06:33:37 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.6 27.6 B 28.7 28.9 mn:A 0.2 0.2 B 0.1 -0.3 gn: 7 13 2013-Jan-24 06:33:37 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2013-Jan-24 06:33:37 LOG5 end_task: Level: (5) ID = <10249> Status = 0 0 0 0 ok 2013-Jan-24 06:33:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2013-Jan-24 06:33:37 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2013-Jan-24 06:33:37 LOG5 finish_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2013-Jan-24 06:33:37 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2013-Jan-24 06:33:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:33:37 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2013-Jan-24 06:33:38 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:33:38 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2013-Jan-24 06:33:38 LOG5 finish_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2013-Jan-24 06:33:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:33:38 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2013-Jan-24 06:33:38 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:33:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:33:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:33:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:33:38 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2013-Jan-24 06:33:38 START begin_task: Starting task 'WAPP+Mock calibration' 2013-Jan-24 06:33:38 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2013-Jan-24 06:33:38 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 06:33:38 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 06:33:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 06:33:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:33:38 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 06:33:38 LOG5 begin_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 06:33:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 06:33:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:33:38 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:38 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:33:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 06:33:38 LOG5 end_task: Level: (5) ID = <10252> Status = 0 0 0 0 ok 2013-Jan-24 06:33:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 06:33:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:33:39 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 06:33:39 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:33:39 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:33:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:33:39 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:33:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 06:33:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:33:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:33:39 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:33:39 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:33:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20130124.a2048.0003.fits 2013-Jan-24 06:33:39 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:33:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:33:39 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:33:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:33:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 06:33:39 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2013-Jan-24 06:33:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 06:33:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 06:33:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:33:39 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130124.a2048.0003.fits} 2013-Jan-24 06:33:39 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:33:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 06:33:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:33:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:33:39 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2013-Jan-24 06:33:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:33:39 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2013-Jan-24 06:33:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2013-Jan-24 06:33:40 LOG5 log_alfabeam: Parameters: 14.152666666666669 26.304277777777777 14.371423 2013.0664568598372 36.699944 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 0 14.152666666666667 26.304277777777784 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 1 14.154723644643868 26.201468440404675 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 2 14.159410632830038 26.270100972664867 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 3 14.157436298185347 26.373212659628486 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 4 14.150624970521079 26.407162566652111 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 5 14.145858715192206 26.337398516994185 2013-Jan-24 06:33:40 LOG4 log_alfabeam: ALFABEAM 6 14.147982817820138 26.234825887008846 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: object=NGC5523_p2_002 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: scantype=ON 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: patternid=302400120 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: scanid=302400121 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: topoafreqhz=1456351329.0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: topobfreqhz=1306351329.0 2013-Jan-24 06:33:40 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:33:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:33:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p2_002:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=302400120:scanid=302400121:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456351329.0:topobfreqhz=1306351329.0:filetype=1 2013-Jan-24 06:33:40 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:33:40 LOG5 begin_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2013-Jan-24 06:33:40 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:33:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:33:40 LOG5 end_task: Level: (5) ID = <10257> Status = 0 0 0 0 ok 2013-Jan-24 06:33:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:33:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:33:40 LOG3 socket_wait: To MOCK: STAR5 2013-Jan-24 06:33:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:33:40 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2013-Jan-24 06:33:40 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:33:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:33:41 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2013-Jan-24 06:33:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:33:41 INFO2 take_data: Starting WAPP+Mock 5-second scan: 302400121 2013-Jan-24 06:33:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:33:41 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2013-Jan-24 06:33:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:33:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:33:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:33:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2013-Jan-24 06:33:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38022.00 2013-Jan-24 06:33:43 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:33:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Jan-24 06:33:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:33:46.02 2013-Jan-24 06:33:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359023626.02 Thu Jan 24 06:33:46 2013 2013-Jan-24 06:33:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351329 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:33:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:33:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:33:47 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:33:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:33:52 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:33:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:33:52 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2013-Jan-24 06:33:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:33:52 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2013-Jan-24 06:33:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 06:33:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:33:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:33:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:33:52 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2013-Jan-24 06:33:52 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:33:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:33:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:33:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:33:52 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2013-Jan-24 06:33:52 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2013-Jan-24 06:33:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:33:52 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2013-Jan-24 06:33:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2013-Jan-24 06:33:52 LOG5 log_alfabeam: Parameters: 14.152666666666669 26.304277777777777 14.374765 2013.0664572400942 36.699944 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 0 14.152666666666676 26.304277777777784 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 1 14.154764413776773 26.201617615166626 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 2 14.159424185254936 26.270586949471866 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 3 14.157408751643921 26.373554834193321 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 4 14.150584064850655 26.407014324832428 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 5 14.145845719707005 26.336909873585107 2013-Jan-24 06:33:52 LOG4 log_alfabeam: ALFABEAM 6 14.148010393792323 26.234490805017252 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: object=NGC5523_p2_002 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: obsmode=CAL 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: scantype=OFF 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: patternid=302400120 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: scanid=302400122 2013-Jan-24 06:33:52 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:33:53 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:33:53 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:33:53 TEST take_mock_data: PSET configuration: topoafreqhz=1456351329.0 2013-Jan-24 06:33:53 TEST take_mock_data: PSET configuration: topobfreqhz=1306351329.0 2013-Jan-24 06:33:53 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:33:53 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:33:53 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p2_002:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=302400120:scanid=302400122:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456351329.0:topobfreqhz=1306351329.0:filetype=1 2013-Jan-24 06:33:53 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:33:53 LOG5 begin_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2013-Jan-24 06:33:53 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:33:53 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:33:53 LOG5 end_task: Level: (5) ID = <10262> Status = 0 0 0 0 ok 2013-Jan-24 06:33:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:33:53 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:33:53 LOG3 socket_wait: To MOCK: STAR5 2013-Jan-24 06:33:53 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:33:53 LOG5 begin_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2013-Jan-24 06:33:53 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:33:53 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:33:53 LOG5 end_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2013-Jan-24 06:33:53 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:33:53 INFO2 take_data: Starting WAPP+Mock 5-second scan: 302400122 2013-Jan-24 06:33:54 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:33:54 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2013-Jan-24 06:33:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:33:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:33:54 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:33:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2013-Jan-24 06:33:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38035.00 2013-Jan-24 06:33:55 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:33:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2013-Jan-24 06:33:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2013-Jan-24 06:33:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:33:58.02 2013-Jan-24 06:33:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359023638.02 Thu Jan 24 06:33:58 2013 2013-Jan-24 06:33:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351329 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:34:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:34:00 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2013-Jan-24 06:34:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:34:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:34:04 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:34:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:34:04 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:34:04 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:34:04 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2013-Jan-24 06:34:04 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2013-Jan-24 06:34:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:34:04 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2013-Jan-24 06:34:04 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2013-Jan-24 06:34:04 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 160.81 and ZA = 8.38 2013-Jan-24 06:34:04 LOG3 track_source: Calling 'track_source NGC5523_p2_002 160.81 8.3811270618 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2013-Jan-24 06:34:04 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:34:04 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {NGC5523_p2_002} INFO {Slewing to source 'NGC5523_p2_002' ...} 2013-Jan-24 06:34:04 INFO1 track_source: Starting to track NGC5523_p2_002 2013-Jan-24 06:34:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "NGC5523_p2_002" 2013-Jan-24 06:34:04 LOG3 vw_send: To DATATAKING: set ra 160.81 2013-Jan-24 06:34:04 LOG3 vw_send: To DATATAKING: set dec 8.3811270618 2013-Jan-24 06:34:04 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:34:04 LOG3 vw_send: To DATATAKING: pnt tr 160.81 8.3811270618 -CF 2013-Jan-24 06:34:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:34:04 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:34:04 LOG5 finish_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:34:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:34:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:34:04 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2013-Jan-24 06:34:04 LOG1 fixed_driftmap: Parameters: HA = +00:12:14.9 Start = 14:22:51.1 LST = 14:22:41.2 diff = 9.9 secs 2013-Jan-24 06:34:05 INFO2 fixed_driftmap: Waiting 7.9 seconds for RA 14:10:36 2013-Jan-24 06:34:05 INFO2 lstwait: Waiting for 7.9 secs from LST 14:22:41 to LST 14:22:49 ... 2013-Jan-24 06:34:05 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7.8661108877607733 BITMAP stat_wait MESSAGE {Waiting ...} 2013-Jan-24 06:34:05 START begin_task: Starting task 'waiting on wait on LST' 2013-Jan-24 06:34:05 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "NGC5523_p2_002" 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: set ra 160.81 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: vw% 160.81 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: set dec 8.3811270618 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: 8.3811270618 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: pnt tr 160.81 8.3811270618 -CF 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2013-Jan-24 06:34:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:34:13 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2013-Jan-24 06:34:13 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2013-Jan-24 06:34:13 LOG4 lstwait: Finished waiting 1.14 seconds late 2013-Jan-24 06:34:13 INFO3 lstwait: Finished waiting 2013-Jan-24 06:34:13 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:34:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2013-Jan-24 06:34:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Jan-24 06:34:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2013-Jan-24 06:34:13 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2013-Jan-24 06:34:13 START begin_task: Starting task 'WAPP+Mock spectral observation' 2013-Jan-24 06:34:13 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2013-Jan-24 06:34:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2013-Jan-24 06:34:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: projid=a2048 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: object=NGC5523_p2_002 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: frontend=alfa 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: caltype=hcorcal 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: patternid=302400123 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: scanid=302400123 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: prfeed=0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: topoafreqhz=1456351329.0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: topobfreqhz=1306351329.0 2013-Jan-24 06:34:13 TEST take_mock_data: PSET configuration: filetype=1 2013-Jan-24 06:34:13 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2013-Jan-24 06:34:13 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=NGC5523_p2_002:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=302400123:scanid=302400123:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456351329.0:topobfreqhz=1306351329.0:filetype=1 2013-Jan-24 06:34:13 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2013-Jan-24 06:34:13 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2013-Jan-24 06:34:13 LOG4 from_mock: From MOCK: psetok 2013-Jan-24 06:34:13 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2013-Jan-24 06:34:13 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2013-Jan-24 06:34:13 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2013-Jan-24 06:34:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2013-Jan-24 06:34:14 LOG3 socket_wait: To MOCK: STAR600 2013-Jan-24 06:34:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2013-Jan-24 06:34:14 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2013-Jan-24 06:34:14 LOG4 from_mock: From MOCK: starok 2013-Jan-24 06:34:14 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2013-Jan-24 06:34:14 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2013-Jan-24 06:34:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2013-Jan-24 06:34:14 INFO2 take_data: Starting WAPP+Mock 600-second scan: 302400123 2013-Jan-24 06:34:14 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2013-Jan-24 06:34:14 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2013-Jan-24 06:34:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:34:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2013-Jan-24 06:34:14 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2013-Jan-24 06:34:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2013-Jan-24 06:34:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38055.00 2013-Jan-24 06:34:16 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.351329 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:34:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 600.0 s 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:34:16 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.55 GB 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2013-Jan-24 06:34:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.351329 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2013-Jan-24 06:34:16 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:16 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.08 GB 2013-Jan-24 06:34:19 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 06:34:19.02 2013-Jan-24 06:34:19 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1359023659.02 Thu Jan 24 06:34:19 2013 2013-Jan-24 06:34:19 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2013-Jan-24 06:34:20 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2013-Jan-24 06:34:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:34:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:35:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:36:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:37:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:38:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:39:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:40:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:41:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:07 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 06:42:07.298 (seconds: 24127.298)!} 2013-Jan-24 06:42:07 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 06:42:07.298 (seconds: 24127.298)! 2013-Jan-24 06:42:08 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 24126.0 to 24127.0! 2013-Jan-24 06:42:09 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (24126.0 - 24128.0)! 2013-Jan-24 06:42:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:43 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:42:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:07 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:19 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:31 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:32 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:44 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:43:56 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:08 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:44:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:20 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2013-Jan-24 06:44:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2013-Jan-24 06:44:20 INFO1 got_mock_message: From MOCK: DONE with observation 2013-Jan-24 06:44:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2013-Jan-24 06:44:20 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2013-Jan-24 06:44:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2013-Jan-24 06:44:20 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2013-Jan-24 06:44:20 STOP finish_task: Finishing task 'fixed azimuth drift map' 2013-Jan-24 06:44:20 LOG5 finish_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2013-Jan-24 06:44:20 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2013-Jan-24 06:44:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:44:20 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2013-Jan-24 06:44:20 LOG5 end_task: Level: (2) ID = <10229> Status = 0 0 0 0 ok 2013-Jan-24 06:44:20 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2013-Jan-24 06:44:20 COMMAND run_command_line: EXECUTING command 65: 'LOAD togs_cima33.conf' 2013-Jan-24 06:44:20 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2013-Jan-24 06:44:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 06:44:20 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2013-Jan-24 06:44:20 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2013-Jan-24 06:44:20 LOG2 CIMA-antvel: Precessing RA = 14:00:00.0 Dec = +25:20:00.0 Epoch = 2013.06648 J 2013-Jan-24 06:44:20 LOG2 CIMA-antvel: Computed apparent RA = 14:00:36.8 Dec = +25:15:58.2 2013-Jan-24 06:44:20 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 38660 2013 24 0.0 2013-Jan-24 06:44:20 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2013-Jan-24 06:44:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2013-Jan-24 06:44:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 06:44:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2013-Jan-24 06:44:22 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2013-Jan-24 06:44:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2013-Jan-24 06:44:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2013-Jan-24 06:44:22 LOG1 config_iflo: Receiver ALFA already selected 2013-Jan-24 06:44:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:44:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:44:22 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:44:22 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Jan-24 06:44:23 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:44:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:44:23 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2013-Jan-24 06:44:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:44:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:44:23 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2013-Jan-24 06:44:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2013-Jan-24 06:44:23 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2013-Jan-24 06:44:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2013-Jan-24 06:44:23 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2013-Jan-24 06:44:23 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2013-Jan-24 06:44:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2013-Jan-24 06:44:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2013-Jan-24 06:44:23 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Jan-24 06:44:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 06:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2013-Jan-24 06:44:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:44:23 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:44:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2013-Jan-24 06:44:24 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2013-Jan-24 06:44:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2013-Jan-24 06:44:24 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 DONE finish_task: DONE finished configuration: IF/LO path 2013-Jan-24 06:44:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:44:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2013-Jan-24 06:44:24 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2013-Jan-24 06:44:24 LOG5 begin_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2013-Jan-24 06:44:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2013-Jan-24 06:44:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2013-Jan-24 06:44:24 START begin_task: Starting task 'selecting calibration port' 2013-Jan-24 06:44:24 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 LOG3 vw_send: To DATATAKING: calport 3 2013-Jan-24 06:44:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2013-Jan-24 06:44:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:24 START begin_task: Starting task 'waiting on calport' 2013-Jan-24 06:44:24 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: calport 3 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:24 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:44:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2013-Jan-24 06:44:24 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2013-Jan-24 06:44:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2013-Jan-24 06:44:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2013-Jan-24 06:44:25 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2013-Jan-24 06:44:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:44:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:44:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:44:25 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2013-Jan-24 06:44:25 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:44:25 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:44:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:44:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:44:25 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2013-Jan-24 06:44:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2013-Jan-24 06:44:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:44:25 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2013-Jan-24 06:44:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2013-Jan-24 06:44:25 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:44:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2013-Jan-24 06:44:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:44:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 06:44:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:44:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:44:26 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2013-Jan-24 06:44:26 LOG3 sock_errsend: To WAPPDATA: FLUSH 2013-Jan-24 06:44:26 STOP finish_task: Finishing task 'configuring WAPPs' 2013-Jan-24 06:44:26 LOG5 finish_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2013-Jan-24 06:44:26 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2013-Jan-24 06:44:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:44:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2013-Jan-24 06:44:26 LOG5 end_task: Level: (2) ID = <10274> Status = 0 0 0 0 ok 2013-Jan-24 06:44:26 COMMAND run_command_line: EXECUTING command 66: 'TRACKCURPOS' 2013-Jan-24 06:44:26 BEGIN begin_task: Starting task 'tracking current position' 2013-Jan-24 06:44:26 LOG5 begin_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2013-Jan-24 06:44:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2013-Jan-24 06:44:26 INFO1 track_current_pos: Starting to track the current commanded position RA = 14:20:14.1 and Dec = +26:18:23.3 2013-Jan-24 06:44:26 LOG3 track_source: Calling 'track_source Cur-pos 142014.1 261823.3 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2013-Jan-24 06:44:26 START begin_task: Starting task 'sending tracking commands' 2013-Jan-24 06:44:26 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Jan-24 06:44:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2013-Jan-24 06:44:26 INFO1 track_source: Starting to track Cur-pos 2013-Jan-24 06:44:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2013-Jan-24 06:44:26 LOG3 vw_send: To DATATAKING: set ra 142014.1 2013-Jan-24 06:44:26 LOG3 vw_send: To DATATAKING: set dec 261823.3 2013-Jan-24 06:44:26 LOG3 vw_send: To DATATAKING: pnt tr send 2013-Jan-24 06:44:26 LOG3 vw_send: To DATATAKING: pnt tr 142014.1 261823.3 -CJ 2013-Jan-24 06:44:26 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2013-Jan-24 06:44:26 STOP finish_task: Finishing task 'sending tracking commands' 2013-Jan-24 06:44:26 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Jan-24 06:44:26 INFO2 finish_task: DONE finished sending: tracking commands 2013-Jan-24 06:44:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:44:26 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2013-Jan-24 06:44:27 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2013-Jan-24 06:44:27 START begin_task: Starting task 'waiting on telescope' 2013-Jan-24 06:44:27 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2013-Jan-24 06:44:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2013-Jan-24 06:44:27 LOG3 waittrk: Start waittrk 5 2013-Jan-24 06:44:27 START begin_task: Starting task 'waiting on telescope movement' 2013-Jan-24 06:44:27 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2013-Jan-24 06:44:27 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: set ra 142014.1 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: vw% 142014.1 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: set dec 261823.3 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: 261823.3 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: pnt tr 142014.1 261823.3 -CJ 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2013-Jan-24 06:44:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:44:32 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2013-Jan-24 06:44:32 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2013-Jan-24 06:44:32 START begin_task: Starting task 'waiting on telescope on source' 2013-Jan-24 06:44:32 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2013-Jan-24 06:44:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2013-Jan-24 06:44:36 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2013-Jan-24 06:44:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:44:36 INFO2 waittrk: Now tracking Cur-pos 2013-Jan-24 06:44:36 LOG4 waittrk: Current telescope position: Az = 160.29 ZA = 8.41 2013-Jan-24 06:44:36 STOP finish_task: Finishing task 'waiting on telescope' 2013-Jan-24 06:44:36 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2013-Jan-24 06:44:36 INFO2 finish_task: DONE finished waiting: telescope on source 2013-Jan-24 06:44:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:44:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2013-Jan-24 06:44:36 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2013-Jan-24 06:44:36 STOP finish_task: Finishing task 'tracking current position' 2013-Jan-24 06:44:36 LOG5 finish_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2013-Jan-24 06:44:36 DONE finish_task: DONE finished tracking: current position 2013-Jan-24 06:44:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:44:36 END end_task: Finishing task 'tracking current position' with status 'OK' 2013-Jan-24 06:44:36 LOG5 end_task: Level: (2) ID = <10279> Status = 0 0 0 0 ok 2013-Jan-24 06:44:36 COMMAND run_command_line: EXECUTING command 67: 'ALFAANGLE 19' 2013-Jan-24 06:44:37 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2013-Jan-24 06:44:37 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2013-Jan-24 06:44:37 LOG5 begin_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2013-Jan-24 06:44:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2013-Jan-24 06:44:37 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2013-Jan-24 06:44:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2013-Jan-24 06:44:37 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2013-Jan-24 06:44:37 START begin_task: Starting task 'waiting on ALFA rotation' 2013-Jan-24 06:44:37 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2013-Jan-24 06:44:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2013-Jan-24 06:44:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2013-Jan-24 06:44:48 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2013-Jan-24 06:44:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2013-Jan-24 06:44:48 LOG5 finish_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2013-Jan-24 06:44:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:44:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2013-Jan-24 06:44:48 LOG5 end_task: Level: (2) ID = <10284> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 COMMAND run_command_line: EXECUTING command 71: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Jan-24 06:44:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2013-Jan-24 06:44:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2013-Jan-24 06:44:48 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2013-Jan-24 06:44:48 BEGIN begin_task: Starting task 'smart frequency switching' 2013-Jan-24 06:44:48 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2013-Jan-24 06:44:48 INFO1 smartfreq: Starting pattern: Smart frequency switching 2013-Jan-24 06:44:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2013-Jan-24 06:44:48 START begin_task: Starting task 'selecting calibration type' 2013-Jan-24 06:44:48 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2013-Jan-24 06:44:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2013-Jan-24 06:44:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:48 START begin_task: Starting task 'waiting on setcal' 2013-Jan-24 06:44:48 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2013-Jan-24 06:44:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2013-Jan-24 06:44:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:48 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:49 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:44:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2013-Jan-24 06:44:49 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2013-Jan-24 06:44:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2013-Jan-24 06:44:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:44:49 LOG3 socket_wait: To ALFAMON: CAL HI 2013-Jan-24 06:44:49 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:44:49 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2013-Jan-24 06:44:49 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:49 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:44:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:44:49 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2013-Jan-24 06:44:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:44:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2013-Jan-24 06:44:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2013-Jan-24 06:44:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:44:49 START begin_task: Starting task 'waiting on command to ALFA' 2013-Jan-24 06:44:49 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2013-Jan-24 06:44:49 LOG4 got_alfamon: From ALFAMON: ACK 2013-Jan-24 06:44:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2013-Jan-24 06:44:49 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2013-Jan-24 06:44:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2013-Jan-24 06:44:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2013-Jan-24 06:44:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2013-Jan-24 06:44:49 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2013-Jan-24 06:44:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2013-Jan-24 06:44:49 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2013-Jan-24 06:44:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2013-Jan-24 06:44:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 06:44:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:44:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:44:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:44:50 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Jan-24 06:44:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2013-Jan-24 06:44:50 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:44:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:44:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:44:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:44:50 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2013-Jan-24 06:44:50 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Jan-24 06:44:50 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 06:44:50 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2013-Jan-24 06:44:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2013-Jan-24 06:44:50 INFO2 adjust_power: Starting to adjust WAPP power 2013-Jan-24 06:44:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2013-Jan-24 06:44:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2013-Jan-24 06:44:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:50 START begin_task: Starting task 'waiting on adjpwrif2' 2013-Jan-24 06:44:50 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Jan-24 06:44:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2013-Jan-24 06:44:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2013-Jan-24 06:44:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20130124.a2048.0004.fits 2013-Jan-24 06:44:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20130124.a2048.0004.fits} 2013-Jan-24 06:44:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:53 LOG4 got_cormsg: From DATATAKING: DONE 2013-Jan-24 06:44:53 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2013-Jan-24 06:44:53 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2013-Jan-24 06:44:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2013-Jan-24 06:44:53 START begin_task: Starting task 'adjusting WAPP power' 2013-Jan-24 06:44:53 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2013-Jan-24 06:44:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2013-Jan-24 06:44:53 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:44:53 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:44:53 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:44:53 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2013-Jan-24 06:44:53 START begin_task: Starting task 'waiting on adjust WAPP power' 2013-Jan-24 06:44:53 LOG5 begin_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2013-Jan-24 06:44:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2013-Jan-24 06:44:53 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:53 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 3 6 dB 2013-Jan-24 06:44:54 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 5 dB --- beam 3: 4 2 dB 2013-Jan-24 06:44:54 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 7 6 dB 2013-Jan-24 06:44:54 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 5 dB 2013-Jan-24 06:44:54 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2013-Jan-24 06:44:54 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2013-Jan-24 06:44:54 LOG5 end_task: Level: (5) ID = <10295> Status = 0 0 0 0 ok 2013-Jan-24 06:44:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 0.917 ALFA beam 1: 0.933 0.974 2013-Jan-24 06:44:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.901 0.914 ALFA beam 3: 0.916 0.978 2013-Jan-24 06:44:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.922 0.896 ALFA beam 5: 1.015 1.077 2013-Jan-24 06:44:54 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.961 0.955 ALFA beam 7: 1.068 0.909 2013-Jan-24 06:44:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 06:44:54 LOG5 finish_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2013-Jan-24 06:44:54 INFO3 finish_task: DONE finished adjusting: WAPP power 2013-Jan-24 06:44:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:44:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 06:44:54 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2013-Jan-24 06:44:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2013-Jan-24 06:44:54 STOP finish_task: Finishing task 'adjusting WAPP power' 2013-Jan-24 06:44:54 LOG5 finish_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2013-Jan-24 06:44:54 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2013-Jan-24 06:44:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2013-Jan-24 06:44:54 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2013-Jan-24 06:44:54 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2013-Jan-24 06:44:54 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Jan-24 06:44:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 06:44:54 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 06:44:54 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:44:54 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:44:54 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:44:54 LOG2 antvel: Parameters to Doppler: Topocentric 38693 2013 24 0.0 2013-Jan-24 06:44:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:44:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 06:44:54 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 06:44:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:44:54 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:44:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:44:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:44:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Jan-24 06:44:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:44:55 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2013-Jan-24 06:44:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 06:44:55 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.559158 2013.0664782176084 18.999933 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000019 26.306472222222233 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 1 14.341237720661715 26.214892941957650 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 2 14.344162969800959 26.304501578758703 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 3 14.340220003437260 26.396481766842530 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 4 14.333227031128718 26.397838506988446 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 5 14.330311250443485 26.307292391166843 2013-Jan-24 06:44:55 LOG4 log_alfabeam: ALFABEAM 6 14.334378500251699 26.216334246400546 2013-Jan-24 06:44:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400124 2013-Jan-24 06:44:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:44:55 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2013-Jan-24 06:44:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:44:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:44:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:44:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 06:44:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38696.00 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:44:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:45:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:45:06 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2013-Jan-24 06:45:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:45:06 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2013-Jan-24 06:45:06 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Jan-24 06:45:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 06:45:06 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 06:45:06 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:45:06 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:45:06 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:45:06 LOG2 antvel: Parameters to Doppler: Topocentric 38705 2013 24 0.0 2013-Jan-24 06:45:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:45:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 06:45:06 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 06:45:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:45:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:45:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:45:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Jan-24 06:45:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:45:06 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2013-Jan-24 06:45:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 06:45:06 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.562500 2013.0664785978654 18.999933 2013-Jan-24 06:45:06 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000001 26.306472222222215 2013-Jan-24 06:45:07 LOG4 log_alfabeam: ALFABEAM 1 14.341273913471287 26.215179782329812 2013-Jan-24 06:45:07 LOG4 log_alfabeam: ALFABEAM 2 14.344163691886484 26.304997345573252 2013-Jan-24 06:45:07 LOG4 log_alfabeam: ALFABEAM 3 14.340184220850711 26.396693139389683 2013-Jan-24 06:45:07 LOG4 log_alfabeam: ALFABEAM 4 14.333190932617661 26.397549517580440 2013-Jan-24 06:45:07 LOG4 log_alfabeam: ALFABEAM 5 14.330311062954818 26.306796905889851 2013-Jan-24 06:45:07 LOG4 log_alfabeam: ALFABEAM 6 14.334414097930162 26.216130134940347 2013-Jan-24 06:45:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400125 2013-Jan-24 06:45:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:45:07 LOG5 begin_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2013-Jan-24 06:45:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:45:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:45:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:07 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:45:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 06:45:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38708.00 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:45:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:45:18 LOG5 end_task: Level: (4) ID = <10299> Status = 0 0 0 0 ok 2013-Jan-24 06:45:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:45:18 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2013-Jan-24 06:45:18 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Jan-24 06:45:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 06:45:18 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 06:45:18 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:45:18 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:45:18 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:45:18 LOG2 antvel: Parameters to Doppler: Topocentric 38718 2013 24 0.0 2013-Jan-24 06:45:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:45:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 06:45:18 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 06:45:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:45:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:45:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:45:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Jan-24 06:45:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:45:19 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Jan-24 06:45:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 06:45:19 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.566121 2013.0664790098106 18.999933 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000015 26.306472222222215 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 1 14.341312847261033 26.215492261345084 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 2 14.344164250953774 26.305532470087584 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 3 14.340145507524609 26.396918381081004 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 4 14.333152102850665 26.397234737108509 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 5 14.330311080527927 26.306262164258545 2013-Jan-24 06:45:19 LOG4 log_alfabeam: ALFABEAM 6 14.334452605148137 26.215912703038342 2013-Jan-24 06:45:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400126 2013-Jan-24 06:45:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:45:19 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Jan-24 06:45:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:45:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:45:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 06:45:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38720.00 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:21 LOG3 WAPP=1+2-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:45:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:45:30 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2013-Jan-24 06:45:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:45:30 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2013-Jan-24 06:45:30 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Jan-24 06:45:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 06:45:30 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 06:45:30 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:45:30 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:45:30 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:45:30 LOG2 antvel: Parameters to Doppler: Topocentric 38730 2013 24 0.0 2013-Jan-24 06:45:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:45:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 06:45:30 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 06:45:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:45:30 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Jan-24 06:45:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:45:30 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2013-Jan-24 06:45:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 06:45:31 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.569464 2013.0664793900676 18.999933 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222222 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 1 14.341348532117710 26.215782264058102 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 2 14.344164563224234 26.306024605345240 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 3 14.340109821747328 26.397122860652665 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 4 14.333116515701933 26.396942634664658 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 5 14.330311298164156 26.305770453442317 2013-Jan-24 06:45:31 LOG4 log_alfabeam: ALFABEAM 6 14.334488095419452 26.215715379833298 2013-Jan-24 06:45:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400127 2013-Jan-24 06:45:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:45:31 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2013-Jan-24 06:45:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:45:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:45:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 06:45:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38732.00 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:45:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:45:42 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2013-Jan-24 06:45:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:45:42 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2013-Jan-24 06:45:42 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Jan-24 06:45:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 06:45:42 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 06:45:42 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:45:42 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:45:42 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:45:42 LOG2 antvel: Parameters to Doppler: Topocentric 38741 2013 24 0.0 2013-Jan-24 06:45:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:45:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 06:45:42 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 06:45:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:45:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:45:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:45:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Jan-24 06:45:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:45:42 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2013-Jan-24 06:45:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 06:45:42 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.572528 2013.0664797386366 18.999933 2013-Jan-24 06:45:42 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000010 26.306472222222215 2013-Jan-24 06:45:42 LOG4 log_alfabeam: ALFABEAM 1 14.341381019098689 26.216049300795806 2013-Jan-24 06:45:42 LOG4 log_alfabeam: ALFABEAM 2 14.344164679432918 26.306474036852560 2013-Jan-24 06:45:42 LOG4 log_alfabeam: ALFABEAM 3 14.340077163485681 26.397307364659635 2013-Jan-24 06:45:43 LOG4 log_alfabeam: ALFABEAM 4 14.333084119652250 26.396673694628731 2013-Jan-24 06:45:43 LOG4 log_alfabeam: ALFABEAM 5 14.330311665501341 26.305321470018018 2013-Jan-24 06:45:43 LOG4 log_alfabeam: ALFABEAM 6 14.334520570171009 26.215537388946093 2013-Jan-24 06:45:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400128 2013-Jan-24 06:45:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:45:43 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2013-Jan-24 06:45:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:45:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:45:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 06:45:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38744.00 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:45:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:45:54 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2013-Jan-24 06:45:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:45:54 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2013-Jan-24 06:45:54 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Jan-24 06:45:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 06:45:54 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 06:45:54 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:45:54 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:45:54 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:45:54 LOG2 antvel: Parameters to Doppler: Topocentric 38754 2013 24 0.0 2013-Jan-24 06:45:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:45:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 06:45:54 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 06:45:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:45:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:45:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:45:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Jan-24 06:45:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:45:55 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2013-Jan-24 06:45:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 06:45:55 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.576149 2013.0664801505816 18.999933 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000015 26.306472222222215 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 1 14.341419140278813 26.216366358493900 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 2 14.344164609525981 26.307003129305990 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 3 14.340038632176011 26.397521840570707 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 4 14.333046107593729 26.396354413860962 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 5 14.330312304152422 26.304792978978931 2013-Jan-24 06:45:55 LOG4 log_alfabeam: ALFABEAM 6 14.334558879384744 26.215330552749485 2013-Jan-24 06:45:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400129 2013-Jan-24 06:45:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:45:55 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2013-Jan-24 06:45:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:45:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:45:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:45:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 06:45:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38756.00 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:46:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:46:06 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2013-Jan-24 06:46:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:46:06 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2013-Jan-24 06:46:06 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Jan-24 06:46:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 06:46:06 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 06:46:06 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:46:06 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:46:06 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:46:06 LOG2 antvel: Parameters to Doppler: Topocentric 38766 2013 24 0.0 2013-Jan-24 06:46:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:46:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 06:46:06 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 06:46:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:46:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:46:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:46:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Jan-24 06:46:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:46:06 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2013-Jan-24 06:46:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 06:46:07 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.579491 2013.0664805308388 18.999933 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222215 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 1 14.341454062570323 26.216660359897087 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 2 14.344164348084528 26.307489466005229 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 3 14.340003134045933 26.397716379576984 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 4 14.333011287574395 26.396058385968107 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 5 14.330313087849397 26.304307265521555 2013-Jan-24 06:46:07 LOG4 log_alfabeam: ALFABEAM 6 14.334594167605868 26.215143008969850 2013-Jan-24 06:46:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400130 2013-Jan-24 06:46:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:46:07 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2013-Jan-24 06:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:46:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:46:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 06:46:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38768.00 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:46:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:46:18 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2013-Jan-24 06:46:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:46:18 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2013-Jan-24 06:46:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Jan-24 06:46:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 06:46:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 06:46:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:46:18 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2013-Jan-24 06:46:18 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:46:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 06:46:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:46:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:46:18 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2013-Jan-24 06:46:18 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Jan-24 06:46:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 06:46:19 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 06:46:19 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:46:19 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:46:19 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:46:19 LOG2 antvel: Parameters to Doppler: Topocentric 38778 2013 24 0.0 2013-Jan-24 06:46:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:46:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 06:46:19 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 06:46:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:46:19 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:46:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:46:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Jan-24 06:46:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:46:19 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2013-Jan-24 06:46:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 06:46:19 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.582833 2013.0664809110958 18.999933 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000019 26.306472222222222 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 1 14.341488733219464 26.216955633888482 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 2 14.344163899904229 26.307973867430821 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 3 14.339967700508350 26.397907663529875 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 4 14.332976720656630 26.395761109833302 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 5 14.330314055661990 26.303823551848190 2013-Jan-24 06:46:19 LOG4 log_alfabeam: ALFABEAM 6 14.334629386603286 26.214958666028075 2013-Jan-24 06:46:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400131 2013-Jan-24 06:46:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:46:20 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2013-Jan-24 06:46:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:46:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:46:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 06:46:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38781.00 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:46:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:46:31 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2013-Jan-24 06:46:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:46:31 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2013-Jan-24 06:46:31 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Jan-24 06:46:31 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 06:46:31 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 06:46:31 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:46:31 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:46:31 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:46:31 LOG2 antvel: Parameters to Doppler: Topocentric 38791 2013 24 0.0 2013-Jan-24 06:46:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:46:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 06:46:31 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 06:46:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:46:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:46:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:46:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Jan-24 06:46:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:46:32 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2013-Jan-24 06:46:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 06:46:32 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.586454 2013.066481323041 18.999933 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000001 26.306472222222219 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 1 14.341526013767322 26.217276943533268 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 2 14.344163206138823 26.308496495292790 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 3 14.339929384932177 26.398111265256581 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 4 14.332939554105396 26.395437658445335 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 5 14.330315309409917 26.303301740913586 2013-Jan-24 06:46:32 LOG4 log_alfabeam: ALFABEAM 6 14.334667464611012 26.214762522921436 2013-Jan-24 06:46:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400132 2013-Jan-24 06:46:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:46:32 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2013-Jan-24 06:46:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:46:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:46:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 06:46:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38793.00 2013-Jan-24 06:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:46:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=2+3-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+2+3-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=2+3-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+2+3-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+2+3-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:34 LOG3 WAPP=1+2+3-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:46:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:46:43 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2013-Jan-24 06:46:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:46:43 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2013-Jan-24 06:46:43 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Jan-24 06:46:43 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 06:46:43 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 06:46:43 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:46:43 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:46:43 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:46:43 LOG2 antvel: Parameters to Doppler: Topocentric 38803 2013 24 0.0 2013-Jan-24 06:46:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:46:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 06:46:43 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 06:46:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:46:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:46:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:46:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Jan-24 06:46:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:46:43 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Jan-24 06:46:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 06:46:44 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.589797 2013.066481703298 18.999933 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000015 26.306472222222215 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 1 14.341560169050483 26.217574817147909 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 2 14.344162375840826 26.308976930091944 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 3 14.339894084090888 26.398295885880682 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 4 14.332905505511061 26.395137833002558 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 5 14.330316653838249 26.302822125601313 2013-Jan-24 06:46:44 LOG4 log_alfabeam: ALFABEAM 6 14.334702541498723 26.214584730607339 2013-Jan-24 06:46:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400133 2013-Jan-24 06:46:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:46:44 LOG5 begin_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2013-Jan-24 06:46:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:46:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:46:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:44 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 06:46:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38805.00 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:46:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:46:55 LOG5 end_task: Level: (4) ID = <10316> Status = 0 0 0 0 ok 2013-Jan-24 06:46:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:46:55 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2013-Jan-24 06:46:55 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Jan-24 06:46:55 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 06:46:55 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 06:46:55 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:46:55 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:46:55 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:46:55 LOG2 antvel: Parameters to Doppler: Topocentric 38815 2013 24 0.0 2013-Jan-24 06:46:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:46:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 06:46:55 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 06:46:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:46:55 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:46:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:46:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Jan-24 06:46:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:46:56 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Jan-24 06:46:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 06:46:56 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.593139 2013.066482083555 18.999933 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000017 26.306472222222222 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 1 14.341594061369760 26.217873739657385 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 2 14.344161365987624 26.309455212456417 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 3 14.339858866622437 26.398477257997524 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 4 14.332871721198062 26.394836983742685 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 5 14.330318174866150 26.302344724174709 2013-Jan-24 06:46:56 LOG4 log_alfabeam: ALFABEAM 6 14.334737530739966 26.214410128886531 2013-Jan-24 06:46:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400134 2013-Jan-24 06:46:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:46:56 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2013-Jan-24 06:46:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:46:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:46:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:46:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 06:46:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38817.00 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:46:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:47:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:47:07 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2013-Jan-24 06:47:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:47:07 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2013-Jan-24 06:47:07 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Jan-24 06:47:07 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 06:47:07 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 06:47:07 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:47:07 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:47:07 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:47:07 LOG2 antvel: Parameters to Doppler: Topocentric 38827 2013 24 0.0 2013-Jan-24 06:47:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:47:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 06:47:07 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 06:47:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:47:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:47:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:47:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Jan-24 06:47:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:47:07 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2013-Jan-24 06:47:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 06:47:08 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.596482 2013.066482463812 18.999933 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000010 26.306472222222215 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 1 14.341627710791819 26.218173846892515 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 2 14.344160178257374 26.309931606490185 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 3 14.339823714006474 26.398655511317212 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 4 14.332838181128890 26.394534973709789 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 5 14.330319871067347 26.301869272127718 2013-Jan-24 06:47:08 LOG4 log_alfabeam: ALFABEAM 6 14.334772450812876 26.214238591623289 2013-Jan-24 06:47:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400135 2013-Jan-24 06:47:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:47:08 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2013-Jan-24 06:47:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:47:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:47:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 06:47:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38829.00 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:47:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:47:19 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2013-Jan-24 06:47:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:47:19 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2013-Jan-24 06:47:19 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Jan-24 06:47:19 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 06:47:19 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 06:47:19 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:47:19 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:47:19 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:47:19 LOG2 antvel: Parameters to Doppler: Topocentric 38839 2013 24 0.0 2013-Jan-24 06:47:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:47:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 06:47:19 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 06:47:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:47:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:47:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:47:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Jan-24 06:47:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:47:20 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2013-Jan-24 06:47:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 06:47:20 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.599824 2013.0664828440692 18.999933 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000001 26.306472222222226 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 1 14.341661097031379 26.218474916620995 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 2 14.344158815651658 26.310405805853492 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 3 14.339788649774508 26.398830560800523 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 4 14.332804905488141 26.394232026293494 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 5 14.330321739084116 26.301396074302474 2013-Jan-24 06:47:20 LOG4 log_alfabeam: ALFABEAM 6 14.334807278419397 26.214070199389354 2013-Jan-24 06:47:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400136 2013-Jan-24 06:47:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:47:20 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2013-Jan-24 06:47:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:47:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:47:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:20 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 06:47:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38841.00 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:47:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:47:31 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2013-Jan-24 06:47:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:47:31 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2013-Jan-24 06:47:31 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Jan-24 06:47:31 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 06:47:31 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 06:47:31 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:47:31 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:47:31 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:47:31 LOG2 antvel: Parameters to Doppler: Topocentric 38851 2013 24 0.0 2013-Jan-24 06:47:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:47:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 06:47:31 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 06:47:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:47:31 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:47:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:47:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Jan-24 06:47:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:47:31 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Jan-24 06:47:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 06:47:32 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.603167 2013.0664832243262 18.999933 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000019 26.306472222222222 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 1 14.341694239974913 26.218777086675185 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 2 14.344157279654960 26.310878073767277 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 3 14.339753655390789 26.399002533241454 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 4 14.332771874420368 26.393928002547856 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 5 14.330323777684310 26.300924867138249 2013-Jan-24 06:47:32 LOG4 log_alfabeam: ALFABEAM 6 14.334842032047789 26.213904828952252 2013-Jan-24 06:47:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400137 2013-Jan-24 06:47:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:47:32 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2013-Jan-24 06:47:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:47:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:47:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:32 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 06:47:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38853.00 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:47:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:47:43 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2013-Jan-24 06:47:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:47:43 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2013-Jan-24 06:47:43 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2013-Jan-24 06:47:43 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2013-Jan-24 06:47:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2013-Jan-24 06:47:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:47:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:47:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:47:43 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Jan-24 06:47:43 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:47:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:47:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:47:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:47:43 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2013-Jan-24 06:47:44 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2013-Jan-24 06:47:44 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2013-Jan-24 06:47:44 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 06:47:44 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 06:47:44 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:47:44 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:47:44 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:47:44 LOG2 antvel: Parameters to Doppler: Topocentric 38863 2013 24 0.0 2013-Jan-24 06:47:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:47:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 06:47:44 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 06:47:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:47:44 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:47:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:47:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2013-Jan-24 06:47:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:47:44 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2013-Jan-24 06:47:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 06:47:44 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.606509 2013.0664836045833 18.999933 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222215 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 1 14.341727119760494 26.219080134329879 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 2 14.344155573492104 26.311348107908927 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 3 14.339718754184767 26.399171348188819 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 4 14.332739107685615 26.393623126308736 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 5 14.330325983294125 26.300455951380428 2013-Jan-24 06:47:44 LOG4 log_alfabeam: ALFABEAM 6 14.334876688606444 26.213742556417973 2013-Jan-24 06:47:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400138 2013-Jan-24 06:47:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:47:45 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2013-Jan-24 06:47:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:47:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:47:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2013-Jan-24 06:47:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38866.00 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:47:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:47:56 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2013-Jan-24 06:47:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:47:56 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2013-Jan-24 06:47:56 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2013-Jan-24 06:47:56 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 06:47:56 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 06:47:56 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:47:56 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:47:56 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:47:56 LOG2 antvel: Parameters to Doppler: Topocentric 38876 2013 24 0.0 2013-Jan-24 06:47:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:47:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 06:47:56 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 06:47:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:47:56 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:47:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:47:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2013-Jan-24 06:47:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:47:57 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2013-Jan-24 06:47:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 06:47:57 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.610130 2013.0664840165284 18.999933 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000017 26.306472222222219 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 1 14.341762458681607 26.219409525513406 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 2 14.344153535017323 26.311854998373462 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 3 14.339681035377449 26.399350777482393 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 4 14.332703892576724 26.393291781585599 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 5 14.330328559464885 26.299950336969054 2013-Jan-24 06:47:57 LOG4 log_alfabeam: ALFABEAM 6 14.334914137977451 26.213570150268385 2013-Jan-24 06:47:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400139 2013-Jan-24 06:47:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:47:57 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2013-Jan-24 06:47:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:47:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:47:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:47:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:47:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38878.00 2013-Jan-24 06:47:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:47:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:48:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:48:08 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2013-Jan-24 06:48:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:48:08 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2013-Jan-24 06:48:08 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2013-Jan-24 06:48:08 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 06:48:08 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 06:48:08 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:48:08 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:48:08 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:48:08 LOG2 antvel: Parameters to Doppler: Topocentric 38887 2013 24 0.0 2013-Jan-24 06:48:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:48:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 06:48:08 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 06:48:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:48:08 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:48:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:48:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2013-Jan-24 06:48:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:48:08 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2013-Jan-24 06:48:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 06:48:09 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.613194 2013.0664843650973 18.999933 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222222 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 1 14.341792129519016 26.219689058713243 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 2 14.344151657980273 26.312281963389832 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 3 14.339649198790740 26.399499801185115 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 4 14.332674327549714 26.393010617838861 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 5 14.330330888646296 26.299524503086680 2013-Jan-24 06:48:09 LOG4 log_alfabeam: ALFABEAM 6 14.334945743113161 26.213427015891181 2013-Jan-24 06:48:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400140 2013-Jan-24 06:48:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:48:09 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2013-Jan-24 06:48:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:48:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:48:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:09 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2013-Jan-24 06:48:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38890.00 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:48:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:48:20 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2013-Jan-24 06:48:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:48:20 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2013-Jan-24 06:48:20 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2013-Jan-24 06:48:20 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 06:48:20 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 06:48:20 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:48:20 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06648 J 2013-Jan-24 06:48:20 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:48:20 LOG2 antvel: Parameters to Doppler: Topocentric 38900 2013 24 0.0 2013-Jan-24 06:48:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:48:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 06:48:20 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 06:48:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:48:20 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:48:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:48:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2013-Jan-24 06:48:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:48:21 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Jan-24 06:48:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 06:48:21 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.616815 2013.0664847770424 18.999933 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000019 26.306472222222222 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 1 14.341826920063834 26.220020320416840 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 2 14.344149262516707 26.312784218167710 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 3 14.339611671856940 26.399672627126080 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 4 14.332639663245500 26.392677455725611 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 5 14.330333815044513 26.299023644718922 2013-Jan-24 06:48:21 LOG4 log_alfabeam: ALFABEAM 6 14.334982992534469 26.213261086328938 2013-Jan-24 06:48:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400141 2013-Jan-24 06:48:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:48:21 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2013-Jan-24 06:48:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:48:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:48:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:21 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2013-Jan-24 06:48:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38902.00 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:48:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:48:32 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2013-Jan-24 06:48:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:48:32 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2013-Jan-24 06:48:32 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2013-Jan-24 06:48:32 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 06:48:32 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 06:48:32 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:48:32 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:48:32 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:48:32 LOG2 antvel: Parameters to Doppler: Topocentric 38912 2013 24 0.0 2013-Jan-24 06:48:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:48:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 06:48:32 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 06:48:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:48:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:48:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:48:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2013-Jan-24 06:48:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:48:32 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Jan-24 06:48:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 06:48:33 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.620158 2013.0664851572997 18.999933 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000015 26.306472222222215 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 1 14.341858776164017 26.220326985387960 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 2 14.344146882957199 26.313245656672009 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 3 14.339577121759303 26.399829046576365 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 4 14.332607924807760 26.392369061751435 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 5 14.330336681459816 26.298563551791347 2013-Jan-24 06:48:33 LOG4 log_alfabeam: ALFABEAM 6 14.335017282687758 26.213110972362109 2013-Jan-24 06:48:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400142 2013-Jan-24 06:48:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:48:33 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2013-Jan-24 06:48:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:48:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:48:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2013-Jan-24 06:48:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38914.00 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:48:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:48:44 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2013-Jan-24 06:48:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:48:44 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2013-Jan-24 06:48:44 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2013-Jan-24 06:48:44 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 06:48:44 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 06:48:44 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:48:44 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:48:44 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:48:44 LOG2 antvel: Parameters to Doppler: Topocentric 38924 2013 24 0.0 2013-Jan-24 06:48:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:48:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 06:48:44 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 06:48:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:48:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:48:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:48:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2013-Jan-24 06:48:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:48:45 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2013-Jan-24 06:48:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 06:48:45 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.623500 2013.0664855375567 18.999933 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000001 26.306472222222215 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 1 14.341890370198730 26.220634319599121 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 2 14.344144345270204 26.313704775772948 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 3 14.339542676044580 26.399982432851775 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 4 14.332576449434484 26.392060023489183 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 5 14.330339702634088 26.298105830984987 2013-Jan-24 06:48:45 LOG4 log_alfabeam: ALFABEAM 6 14.335051465043589 26.212963830460225 2013-Jan-24 06:48:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400143 2013-Jan-24 06:48:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:48:45 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2013-Jan-24 06:48:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:48:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:48:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:45 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2013-Jan-24 06:48:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38926.00 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:48:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:48:56 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2013-Jan-24 06:48:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:48:56 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2013-Jan-24 06:48:56 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2013-Jan-24 06:48:56 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 06:48:56 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 06:48:56 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:48:56 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:48:56 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:48:56 LOG2 antvel: Parameters to Doppler: Topocentric 38935 2013 24 0.0 2013-Jan-24 06:48:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:48:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 06:48:56 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 06:48:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:48:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:48:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:48:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2013-Jan-24 06:48:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:48:56 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2013-Jan-24 06:48:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 06:48:57 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.626564 2013.0664858861255 18.999933 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000017 26.306472222222215 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 1 14.341919114515997 26.220916723476421 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 2 14.344141881113236 26.314123774161370 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 3 14.339511180045760 26.400120457128448 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 4 14.332547814787954 26.391776078737688 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 5 14.330342607196839 26.297688160430049 2013-Jan-24 06:48:57 LOG4 log_alfabeam: ALFABEAM 6 14.335082716600631 26.212831478890173 2013-Jan-24 06:48:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400144 2013-Jan-24 06:48:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:48:57 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Jan-24 06:48:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:48:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:48:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:48:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:57 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:48:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2013-Jan-24 06:48:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38938.00 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:48:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:49:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:49:08 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2013-Jan-24 06:49:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:49:08 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2013-Jan-24 06:49:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2013-Jan-24 06:49:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2013-Jan-24 06:49:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2013-Jan-24 06:49:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:49:08 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2013-Jan-24 06:49:08 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:49:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2013-Jan-24 06:49:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:49:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:49:08 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2013-Jan-24 06:49:08 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2013-Jan-24 06:49:08 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 06:49:09 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2013-Jan-24 06:49:09 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:49:09 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:49:09 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:49:09 LOG2 antvel: Parameters to Doppler: Topocentric 38948 2013 24 0.0 2013-Jan-24 06:49:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:49:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2013-Jan-24 06:49:09 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2013-Jan-24 06:49:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:49:09 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:49:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:49:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2013-Jan-24 06:49:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:49:09 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2013-Jan-24 06:49:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 06:49:09 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.630185 2013.0664862980707 18.999933 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000017 26.306472222222215 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 1 14.341952811302971 26.221251205849892 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 2 14.344138801864714 26.314616546356550 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 3 14.339474064698642 26.400280389624459 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 4 14.332514248657725 26.391439801744330 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 5 14.330346203342383 26.297197012969974 2013-Jan-24 06:49:09 LOG4 log_alfabeam: ALFABEAM 6 14.335119539480182 26.212678185677845 2013-Jan-24 06:49:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400145 2013-Jan-24 06:49:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:49:10 LOG5 begin_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2013-Jan-24 06:49:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:49:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2013-Jan-24 06:49:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2013-Jan-24 06:49:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38951.00 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:49:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:49:21 LOG5 end_task: Level: (4) ID = <10342> Status = 0 0 0 0 ok 2013-Jan-24 06:49:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:49:21 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2013-Jan-24 06:49:21 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2013-Jan-24 06:49:21 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 06:49:21 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2013-Jan-24 06:49:21 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:49:21 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:49:21 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:49:21 LOG2 antvel: Parameters to Doppler: Topocentric 38961 2013 24 0.0 2013-Jan-24 06:49:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:49:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2013-Jan-24 06:49:21 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2013-Jan-24 06:49:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:49:21 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:49:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:49:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2013-Jan-24 06:49:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:49:22 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2013-Jan-24 06:49:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 06:49:22 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.633806 2013.0664867100159 18.999933 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222215 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 1 14.341986212921574 26.221586444180200 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 2 14.344135544353398 26.315106707035437 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 3 14.339437066834396 26.400436904140292 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 4 14.332480978792727 26.391102797285388 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 5 14.330349973843228 26.296708536018901 2013-Jan-24 06:49:22 LOG4 log_alfabeam: ALFABEAM 6 14.335156241097707 26.212528240170784 2013-Jan-24 06:49:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400146 2013-Jan-24 06:49:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:49:22 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2013-Jan-24 06:49:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:49:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2013-Jan-24 06:49:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2013-Jan-24 06:49:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2013-Jan-24 06:49:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38963.00 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:49:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:49:33 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2013-Jan-24 06:49:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:49:33 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2013-Jan-24 06:49:33 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2013-Jan-24 06:49:33 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 06:49:33 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2013-Jan-24 06:49:33 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:49:33 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:49:33 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:49:33 LOG2 antvel: Parameters to Doppler: Topocentric 38973 2013 24 0.0 2013-Jan-24 06:49:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:49:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2013-Jan-24 06:49:33 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2013-Jan-24 06:49:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:49:33 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:49:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:49:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2013-Jan-24 06:49:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:49:33 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2013-Jan-24 06:49:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 06:49:34 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.637148 2013.0664870902729 18.999933 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000015 26.306472222222222 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 1 14.342016779496879 26.221896481211200 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 2 14.344132382193791 26.315556768742923 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 3 14.339403026026487 26.400578353874568 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 4 14.332450534756783 26.390791155415226 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 5 14.330353605963730 26.296260079610231 2013-Jan-24 06:49:34 LOG4 log_alfabeam: ALFABEAM 6 14.335190005229885 26.212392790752862 2013-Jan-24 06:49:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400147 2013-Jan-24 06:49:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:49:34 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2013-Jan-24 06:49:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:49:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2013-Jan-24 06:49:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2013-Jan-24 06:49:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38975.00 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:49:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:49:45 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2013-Jan-24 06:49:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:49:45 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2013-Jan-24 06:49:45 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2013-Jan-24 06:49:45 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 06:49:45 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2013-Jan-24 06:49:45 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:49:45 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:49:45 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:49:45 LOG2 antvel: Parameters to Doppler: Topocentric 38985 2013 24 0.0 2013-Jan-24 06:49:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:49:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2013-Jan-24 06:49:45 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2013-Jan-24 06:49:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:49:45 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:49:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:49:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2013-Jan-24 06:49:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:49:46 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2013-Jan-24 06:49:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 06:49:46 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.640491 2013.0664874705299 18.999933 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222219 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 1 14.342047104668461 26.222207176455015 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 2 14.344129071994354 26.316004713009828 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 3 14.339369079073625 26.400716986081282 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 4 14.332420333028217 26.390478878984332 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 5 14.330357382869970 26.295813789415156 2013-Jan-24 06:49:46 LOG4 log_alfabeam: ALFABEAM 6 14.335223672389706 26.212260100441465 2013-Jan-24 06:49:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400148 2013-Jan-24 06:49:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:49:46 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2013-Jan-24 06:49:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:49:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2013-Jan-24 06:49:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38987.00 2013-Jan-24 06:49:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:49:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:49:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:49:57 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2013-Jan-24 06:49:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:49:57 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2013-Jan-24 06:49:57 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2013-Jan-24 06:49:57 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 06:49:57 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2013-Jan-24 06:49:57 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:49:57 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:49:57 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:49:57 LOG2 antvel: Parameters to Doppler: Topocentric 38996 2013 24 0.0 2013-Jan-24 06:49:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:49:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2013-Jan-24 06:49:57 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2013-Jan-24 06:49:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:49:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:49:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:49:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2013-Jan-24 06:49:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:49:57 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2013-Jan-24 06:49:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 06:49:58 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.643555 2013.0664878190989 18.999933 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222219 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 1 14.342074679342963 26.222492406719784 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 2 14.344125910818649 26.316413284465767 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 3 14.339338058195658 26.400841558174125 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 4 14.332392872228777 26.390192220624296 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 5 14.330360968795809 26.295406775597304 2013-Jan-24 06:49:58 LOG4 log_alfabeam: ALFABEAM 6 14.335254434235527 26.212140921345011 2013-Jan-24 06:49:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400149 2013-Jan-24 06:49:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:49:58 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2013-Jan-24 06:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:49:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2013-Jan-24 06:49:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:49:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2013-Jan-24 06:49:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 38999.00 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:50:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:50:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:50:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:50:09 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2013-Jan-24 06:50:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:50:09 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2013-Jan-24 06:50:09 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2013-Jan-24 06:50:09 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 06:50:09 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2013-Jan-24 06:50:09 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:50:09 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:50:09 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:50:09 LOG2 antvel: Parameters to Doppler: Topocentric 39009 2013 24 0.0 2013-Jan-24 06:50:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:50:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2013-Jan-24 06:50:09 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2013-Jan-24 06:50:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:50:09 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:50:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:50:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:50:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2013-Jan-24 06:50:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:50:10 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2013-Jan-24 06:50:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 06:50:10 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.647176 2013.0664882310441 18.999933 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000006 26.306472222222222 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 1 14.342106996615762 26.222830022300155 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 2 14.344122020578865 26.316893665900054 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 3 14.339301514564195 26.400985733667081 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 4 14.332360690403364 26.389852943296219 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 5 14.330365357264434 26.294928285247504 2013-Jan-24 06:50:10 LOG4 log_alfabeam: ALFABEAM 6 14.335290668646863 26.212003053771085 2013-Jan-24 06:50:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400150 2013-Jan-24 06:50:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:50:10 LOG5 begin_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2013-Jan-24 06:50:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:50:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2013-Jan-24 06:50:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:50:10 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:50:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2013-Jan-24 06:50:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39011.00 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:50:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:50:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:50:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:50:21 LOG5 end_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2013-Jan-24 06:50:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:50:21 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2013-Jan-24 06:50:21 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2013-Jan-24 06:50:21 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 06:50:21 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2013-Jan-24 06:50:21 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:50:21 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:50:21 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:50:21 LOG2 antvel: Parameters to Doppler: Topocentric 39021 2013 24 0.0 2013-Jan-24 06:50:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:50:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2013-Jan-24 06:50:21 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2013-Jan-24 06:50:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:50:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:50:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:50:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:50:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2013-Jan-24 06:50:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2013-Jan-24 06:50:21 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2013-Jan-24 06:50:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 06:50:21 LOG5 log_alfabeam: Parameters: 14.337250000000003 26.306472222222219 14.650518 2013.0664886113011 18.999933 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 0 14.337250000000003 26.306472222222215 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 1 14.342136564777041 26.223142099889508 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 2 14.344118284047619 26.317334654564483 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 3 14.339267900389160 26.401115902878388 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 4 14.332331248058006 26.389539356855430 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 5 14.330369550017924 26.294489089318173 2013-Jan-24 06:50:22 LOG4 log_alfabeam: ALFABEAM 6 14.335323994538749 26.211878643436815 2013-Jan-24 06:50:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 302400151 2013-Jan-24 06:50:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2013-Jan-24 06:50:22 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2013-Jan-24 06:50:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2013-Jan-24 06:50:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2013-Jan-24 06:50:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:50:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2013-Jan-24 06:50:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 39023.00 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.560069 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.628636 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.671952 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 839.514975 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1937.934007 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:50:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1990.646235 MHz 2013-Jan-24 06:50:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2013-Jan-24 06:50:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2013-Jan-24 06:50:33 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2013-Jan-24 06:50:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2013-Jan-24 06:50:33 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2013-Jan-24 06:50:33 INFO2 smartfreq: Switching off CAL 2013-Jan-24 06:50:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2013-Jan-24 06:50:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2013-Jan-24 06:50:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2013-Jan-24 06:50:33 LOG5 begin_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2013-Jan-24 06:50:33 LOG3 CALCONTROL-caltrig: Software trigger 2013-Jan-24 06:50:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2013-Jan-24 06:50:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2013-Jan-24 06:50:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2013-Jan-24 06:50:33 LOG5 end_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2013-Jan-24 06:50:33 INFO3 restore_frequencies: Restoring original frequencies 2013-Jan-24 06:50:33 LOG5 antvel: Calling 'antvel 142014.100000 261823.300000 J Topocentric 0' 2013-Jan-24 06:50:34 LOG2 antvel: Precessing RA = 14:20:14.1 Dec = +26:18:23.3 Epoch = 2013.06649 J 2013-Jan-24 06:50:34 LOG2 antvel: Computed apparent RA = 14:20:49.9 Dec = +26:14:34.4 2013-Jan-24 06:50:34 LOG2 antvel: Parameters to Doppler: Topocentric 39033 2013 24 0.0 2013-Jan-24 06:50:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2013-Jan-24 06:50:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2013-Jan-24 06:50:34 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2013-Jan-24 06:50:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2013-Jan-24 06:50:34 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2013-Jan-24 06:50:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 06:50:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:50:34 STOP finish_task: Finishing task 'smart frequency switching' 2013-Jan-24 06:50:34 LOG5 finish_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2013-Jan-24 06:50:34 DONE finish_task: DONE finished pattern: smart frequency switching 2013-Jan-24 06:50:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:50:34 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2013-Jan-24 06:50:34 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2013-Jan-24 06:50:34 NOTE run_command_file: DONE with command file processing 2013-Jan-24 06:50:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2013-Jan-24 06:50:34 STOP finish_task: Finishing task 'running command file '130124.cmd'' 2013-Jan-24 06:50:34 LOG5 finish_task: Level: (1) ID = <10042> Status = 0 0 0 0 ok 2013-Jan-24 06:50:34 DONE finish_task: DONE finished running: command file '130124.cmd' 2013-Jan-24 06:50:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2013-Jan-24 06:50:34 END end_task: Finishing task 'running command file '130124.cmd'' with status 'OK' 2013-Jan-24 06:50:34 LOG5 end_task: Level: (1) ID = <10042> Status = 0 0 0 0 ok 2013-Jan-24 06:50:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2013-Jan-24 06:50:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2013-Jan-24 06:50:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:50:34 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:50:59 ALERT CIMA-exit_cima: Exiting CIMA ... 2013-Jan-24 06:50:59 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2013-Jan-24 06:50:59 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2013-Jan-24 06:50:59 LOG3 vw_send: To DATATAKING: mvdata a2048 2013-Jan-24 06:50:59 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2013-Jan-24 06:50:59 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2013-Jan-24 06:50:59 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2013-Jan-24 06:50:59 NOTE CIMA-exit_cima: Cleaning up session ... 2013-Jan-24 06:50:59 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2013-Jan-24 06:50:59 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2013-Jan-24 06:51:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:51:00 LOG4 got_cormsg: From DATATAKING: vw% 2013-Jan-24 06:51:01 LOG3 exec_msg: Closing socket 2013-Jan-24 06:51:01 INFO4 bgerror: sock_write: 'connect' error --- Connection refused 2013-Jan-24 06:51:01 INFO4 bgerror: while executing 2013-Jan-24 06:51:01 INFO4 bgerror: "sockmsg" 2013-Jan-24 06:51:01 INFO4 bgerror: (procedure "exec_msg" line 12) 2013-Jan-24 06:51:01 INFO4 bgerror: invoked from within 2013-Jan-24 06:51:01 INFO4 bgerror: "exec_msg" 2013-Jan-24 06:51:01 ERROR bgerror: ERROR script run by 'executive' aborted 2013-Jan-24 06:51:01 ERROR bgerror: ERROR reason: sock_write: 'connect' error --- Connection refused 2013-Jan-24 06:51:01 NOTE bgerror: The error occurred while the executive was executing the following task stack: 2013-Jan-24 06:51:01 NOTE query_task: The executive is IDLE 2013-Jan-24 06:51:01 WARNING abort_task: WARNING cleaning up after crash! 2013-Jan-24 06:51:01 INFO4 clean_up_after_crash: No cleaning required after crash