2012-Dec-14 18:52:23 BEGIN executive: CIMA executive starting ... 2012-Dec-14 18:52:23 NOTE executive: STARTING NEW CIMA SESSION 2012-Dec-14 18:52:23 INFO1 executive: Using CIMA version 3.3.04 'stable' from 2012-11-29 16:58 2012-Dec-14 18:52:23 INFO4 executive: This is an ON-LINE session 2012-Dec-14 18:52:23 INFO4 executive: This is a LOCAL session 2012-Dec-14 18:52:23 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Dec-14 18:52:23 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'DPADILLA' 2012-Dec-14 18:52:23 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20121214' 2012-Dec-14 18:52:24 LOG2 log_preferences: Currently applied preferences: 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(dailylog) = daily 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(offlinelog) = write 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(logcolours) = full 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(displaylevel) = LOG5 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(displayformat) = long 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(logformat) = new 2012-Dec-14 18:52:24 LOG2 log_preferences: prefs(fontsize) = 4 2012-Dec-14 18:52:24 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Dec-14 18:52:24 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Dec-14 18:52:24 ALERT executive: CIMA executive ready 2012-Dec-14 18:52:26 NOTE frontend: CIMA frontend ready 2012-Dec-14 18:52:26 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2012-Dec-14 18:52:26 LOG4 got_cormsg: From DATATAKING: vw% setup 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% io 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% tape off 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:52:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:52:35 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Dec-14 18:52:35 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2012-Dec-14 18:52:35 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Dec-14 18:52:35 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2012-Dec-14 18:52:35 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Dec-14 18:52:35 NOTE select_receiver: Starting to select receiver ALFA 2012-Dec-14 18:52:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Dec-14 18:52:35 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Dec-14 18:52:35 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Dec-14 18:52:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Dec-14 18:52:35 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Dec-14 18:52:35 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Dec-14 18:52:35 DONE finish_task: DONE finished selecting: receiver ALFA 2012-Dec-14 18:52:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:52:35 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Dec-14 18:52:35 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Dec-14 18:52:35 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Dec-14 18:52:35 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Dec-14 18:52:42 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2012-Dec-14 18:53:29 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2012-Dec-14 18:53:29 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima33.cmd' (at lines 38 - 54) 2012-Dec-14 18:53:29 INFO4 CIMA-load_command_file: Loaded command file '121214.cmd' 2012-Dec-14 18:53:34 INFO1 CIMA-run_command_file: Transferring command file '121214.cmd' to executive ... 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2012-Dec-14 18:53:34 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_074) < 003845 THEN} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=217.51 alfaangle=-18.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_074 ra=12400.00 dec=305030.00} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {LOAD togs_cima33.conf} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 45 {TRACKCURPOS} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 46 {ALFAANGLE 19} 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 50 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Dec-14 18:53:35 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: run_command_file 121214.cmd 1 1 23 2012-Dec-14 18:53:35 LOG4 run_command_file: Calling 'run_command_file 121214.cmd 1 1 23' 2012-Dec-14 18:53:35 BEGIN begin_task: Starting task 'running command file '121214.cmd'' 2012-Dec-14 18:53:35 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Dec-14 18:53:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '121214.cmd' ...} 2012-Dec-14 18:53:35 NOTE run_command_file: Starting execution of command file '121214.cmd' from line 1 2012-Dec-14 18:53:35 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2012-Dec-14 18:53:35 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Dec-14 18:53:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 18:53:35 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Dec-14 18:53:35 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Dec-14 18:53:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Dec-14 18:53:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 18:53:37 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Dec-14 18:53:37 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Dec-14 18:53:37 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Dec-14 18:53:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Dec-14 18:53:37 INFO1 config_iflo: Selecting receiver ALFA 2012-Dec-14 18:53:37 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2012-Dec-14 18:53:37 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2012-Dec-14 18:53:37 START begin_task: Starting task 'selecting receiver ALFA' 2012-Dec-14 18:53:37 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Dec-14 18:53:38 NOTE select_receiver: Starting to select receiver ALFA 2012-Dec-14 18:53:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Dec-14 18:53:38 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Dec-14 18:53:38 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Dec-14 18:53:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Dec-14 18:53:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Dec-14 18:53:38 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Dec-14 18:53:38 INFO2 finish_task: DONE finished selecting: receiver ALFA 2012-Dec-14 18:53:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 18:53:38 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Dec-14 18:53:38 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Dec-14 18:53:38 START begin_task: Starting task 'waiting for receiver ALFA' 2012-Dec-14 18:53:38 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Dec-14 18:53:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 100.1 BITMAP stat_alfa_rot INFO {Waiting on rotating floor} 2012-Dec-14 18:53:38 START begin_task: Starting task 'waiting on waiting for receiver rotation' 2012-Dec-14 18:53:38 LOG5 begin_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2012-Dec-14 18:53:38 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Dec-14 18:53:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Dec-14 18:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:12 STOP end_task: Finishing task 'waiting on waiting for receiver rotation' with status 'OK' 2012-Dec-14 18:55:12 LOG5 end_task: Level: (4) ID = <10006> Status = 0 0 0 0 ok 2012-Dec-14 18:55:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT 2012-Dec-14 18:55:12 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2012-Dec-14 18:55:12 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Dec-14 18:55:12 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Dec-14 18:55:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Dec-14 18:55:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 18:55:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 18:55:13 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 18:55:13 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Dec-14 18:55:13 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 18:55:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 18:55:13 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Dec-14 18:55:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 18:55:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: alfafb 1 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Dec-14 18:55:13 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2012-Dec-14 18:55:13 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Dec-14 18:55:14 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Dec-14 18:55:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:55:14 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Dec-14 18:55:14 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Dec-14 18:55:14 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Dec-14 18:55:14 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Dec-14 18:55:14 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Dec-14 18:55:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Dec-14 18:55:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:55:14 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Dec-14 18:55:14 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: alfafb 1 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Dec-14 18:55:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:55:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:26 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 18:55:26 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Dec-14 18:55:26 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2012-Dec-14 18:55:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Dec-14 18:55:26 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Dec-14 18:55:26 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Dec-14 18:55:26 DONE finish_task: DONE finished configuration: IF/LO path 2012-Dec-14 18:55:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:55:26 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Dec-14 18:55:26 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Dec-14 18:55:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Dec-14 18:55:26 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2012-Dec-14 18:55:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Dec-14 18:55:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Dec-14 18:55:26 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Dec-14 18:55:26 START begin_task: Starting task 'selecting calibration port' 2012-Dec-14 18:55:26 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2012-Dec-14 18:55:26 LOG3 vw_send: To DATATAKING: calport 3 2012-Dec-14 18:55:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Dec-14 18:55:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:55:27 START begin_task: Starting task 'waiting on calport' 2012-Dec-14 18:55:27 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2012-Dec-14 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:27 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Dec-14 18:55:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:27 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 18:55:27 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Dec-14 18:55:27 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2012-Dec-14 18:55:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Dec-14 18:55:27 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Dec-14 18:55:27 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2012-Dec-14 18:55:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 18:55:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 18:55:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 18:55:27 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Dec-14 18:55:27 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 18:55:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 18:55:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 18:55:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 18:55:27 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Dec-14 18:55:27 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Dec-14 18:55:27 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Dec-14 18:55:27 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Dec-14 18:55:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Dec-14 18:55:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Dec-14 18:55:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Dec-14 18:55:28 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Dec-14 18:55:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 18:55:28 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2012-Dec-14 18:55:28 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 18:55:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 18:55:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 18:55:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 18:55:28 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 18:55:28 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Dec-14 18:55:28 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2012-Dec-14 18:55:28 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Dec-14 18:55:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:55:29 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Dec-14 18:55:29 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2012-Dec-14 18:55:29 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2012-Dec-14 18:55:29 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2012-Dec-14 18:55:29 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2012-Dec-14 18:55:29 LOG3 is_if_valid: Current source data: down 218.2 139.2 539 - - 700 3.6 2012-Dec-14 18:55:29 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2012-Dec-14 18:55:29 INFO5 is_if_valid: Condition parsed as: 0 2012-Dec-14 18:55:29 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2012-Dec-14 18:55:29 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2012-Dec-14 18:55:29 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2012-Dec-14 18:55:29 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2012-Dec-14 18:55:29 LOG3 is_if_valid: Current source data: up 233.9 19.1 UP - - 143 3.4 2012-Dec-14 18:55:29 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2012-Dec-14 18:55:29 INFO5 is_if_valid: Condition parsed as: 1 2012-Dec-14 18:55:29 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2012-Dec-14 18:55:29 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2012-Dec-14 18:55:29 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2012-Dec-14 18:55:29 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2012-Dec-14 18:55:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2012-Dec-14 18:55:29 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +284000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2012-Dec-14 18:55:29 START begin_task: Starting task 'sending tracking commands' 2012-Dec-14 18:55:29 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2012-Dec-14 18:55:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2012-Dec-14 18:55:30 INFO1 track_source: Starting to track galfasrc2 2012-Dec-14 18:55:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2012-Dec-14 18:55:30 LOG3 vw_send: To DATATAKING: set ra 011400.0 2012-Dec-14 18:55:30 LOG3 vw_send: To DATATAKING: set dec +284000 2012-Dec-14 18:55:30 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Dec-14 18:55:30 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +284000 -CJ 2012-Dec-14 18:55:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2012-Dec-14 18:55:30 STOP finish_task: Finishing task 'sending tracking commands' 2012-Dec-14 18:55:30 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2012-Dec-14 18:55:30 INFO2 finish_task: DONE finished sending: tracking commands 2012-Dec-14 18:55:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 18:55:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Dec-14 18:55:30 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2012-Dec-14 18:55:30 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2012-Dec-14 18:55:30 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2012-Dec-14 18:55:30 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2012-Dec-14 18:55:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:55:30 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2012-Dec-14 18:55:30 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2012-Dec-14 18:55:30 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2012-Dec-14 18:55:30 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2012-Dec-14 18:55:30 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2012-Dec-14 18:55:30 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2012-Dec-14 18:55:30 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2012-Dec-14 18:55:30 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2012-Dec-14 18:55:30 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2012-Dec-14 18:55:30 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2012-Dec-14 18:55:30 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2012-Dec-14 18:55:30 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2012-Dec-14 18:55:30 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2012-Dec-14 18:55:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2012-Dec-14 18:55:31 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2012-Dec-14 18:55:31 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2012-Dec-14 18:55:31 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Dec-14 18:55:31 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Dec-14 18:55:31 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Dec-14 18:55:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20121214.a2048.0000.fits 2012-Dec-14 18:55:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2012-Dec-14 18:55:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Dec-14 18:55:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Dec-14 18:55:31 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20121214.a2048.0000.fits} 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: set dec +284000 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: +284000 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +284000 -CJ 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2012-Dec-14 18:55:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 18:55:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Dec-14 18:58:01 ERROR end_wait_seconds: ERROR timed out while waiting for ALFA rotation! 2012-Dec-14 18:58:01 LOG1 task_failed: Task 'waiting on ALFA rotation' failed! 2012-Dec-14 18:58:01 LOG5 task_failed: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Dec-14 18:58:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'FAILED' 2012-Dec-14 18:58:01 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 1 failed 2012-Dec-14 18:58:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Dec-14 18:58:01 ALERT rotate_alfa: Current ALFA angle is +50.0 degrees! 2012-Dec-14 18:58:01 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2012-Dec-14 18:58:01 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 1 failed 2012-Dec-14 18:58:01 ERROR finish_task: ERROR failed configuration: rotating ALFA to +19 degrees 2012-Dec-14 18:58:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2012-Dec-14 18:58:01 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'FAILED' 2012-Dec-14 18:58:01 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 1 failed 2012-Dec-14 18:58:01 ALERT run_command_file: Stopping command file processing at line 15! 2012-Dec-14 18:58:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2012-Dec-14 18:58:01 STOP finish_task: Finishing task 'running command file '121214.cmd'' 2012-Dec-14 18:58:01 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2012-Dec-14 18:58:01 ERROR finish_task: ERROR failed running: command file '121214.cmd' 2012-Dec-14 18:58:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2012-Dec-14 18:58:01 END end_task: Finishing task 'running command file '121214.cmd'' with status 'FAILED' 2012-Dec-14 18:58:01 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2012-Dec-14 18:58:15 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Dec-14 18:58:15 LOG4 exec_msg: From OBSERVER: run_command_file 121214.cmd 14 1 23 2012-Dec-14 18:58:15 LOG4 run_command_file: Calling 'run_command_file 121214.cmd 14 1 23' 2012-Dec-14 18:58:15 BEGIN begin_task: Starting task 'running command file '121214.cmd'' 2012-Dec-14 18:58:15 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2012-Dec-14 18:58:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '121214.cmd' ...} 2012-Dec-14 18:58:16 NOTE run_command_file: Starting execution of command file '121214.cmd' from line 14 2012-Dec-14 18:58:16 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2012-Dec-14 18:58:16 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2012-Dec-14 18:58:16 LOG1 task_failed: Task 'running command file '121214.cmd'' failed! 2012-Dec-14 18:58:16 LOG5 task_failed: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2012-Dec-14 18:58:16 ALERT run_command_file: Stopping command file processing at line 14! 2012-Dec-14 18:58:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2012-Dec-14 18:58:16 STOP finish_task: Finishing task 'running command file '121214.cmd'' 2012-Dec-14 18:58:16 LOG5 finish_task: Level: (1) ID = <10018> Status = 0 0 0 1 failed 2012-Dec-14 18:58:16 ERROR finish_task: ERROR failed running: command file '121214.cmd' 2012-Dec-14 18:58:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2012-Dec-14 18:58:16 END end_task: Finishing task 'running command file '121214.cmd'' with status 'FAILED' 2012-Dec-14 18:58:16 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 1 failed 2012-Dec-14 18:58:22 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Dec-14 18:58:22 LOG4 exec_msg: From OBSERVER: run_command_file 121214.cmd 9 1 23 2012-Dec-14 18:58:22 LOG4 run_command_file: Calling 'run_command_file 121214.cmd 9 1 23' 2012-Dec-14 18:58:22 BEGIN begin_task: Starting task 'running command file '121214.cmd'' 2012-Dec-14 18:58:22 LOG5 begin_task: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2012-Dec-14 18:58:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '121214.cmd' ...} 2012-Dec-14 18:58:23 NOTE run_command_file: Starting execution of command file '121214.cmd' from line 9 2012-Dec-14 18:58:23 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2012-Dec-14 18:58:23 ERROR run_command_line: ERROR found an 'ELSEIF' without matching 'IF'! 2012-Dec-14 18:58:23 LOG1 task_failed: Task 'running command file '121214.cmd'' failed! 2012-Dec-14 18:58:23 LOG5 task_failed: Level: (1) ID = <10019> Status = 0 0 0 0 ok 2012-Dec-14 18:58:23 ALERT run_command_file: Stopping command file processing at line 9! 2012-Dec-14 18:58:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2012-Dec-14 18:58:23 STOP finish_task: Finishing task 'running command file '121214.cmd'' 2012-Dec-14 18:58:23 LOG5 finish_task: Level: (1) ID = <10019> Status = 0 0 0 1 failed 2012-Dec-14 18:58:23 ERROR finish_task: ERROR failed running: command file '121214.cmd' 2012-Dec-14 18:58:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2012-Dec-14 18:58:23 END end_task: Finishing task 'running command file '121214.cmd'' with status 'FAILED' 2012-Dec-14 18:58:23 LOG5 end_task: Level: (1) ID = <10019> Status = 0 0 0 1 failed 2012-Dec-14 18:58:35 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2012-Dec-14 18:58:35 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima33.cmd' (at lines 38 - 54) 2012-Dec-14 18:58:35 INFO4 CIMA-load_command_file: Loaded command file '121214.cmd' 2012-Dec-14 18:58:36 INFO1 CIMA-run_command_file: Transferring command file '121214.cmd' to executive ... 2012-Dec-14 18:58:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2012-Dec-14 18:58:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2012-Dec-14 18:58:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2012-Dec-14 18:58:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock_cima33.conf} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGES33PP_p3_074) < 003845 THEN} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=217.51 alfaangle=-18.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_074 ra=12400.00 dec=305030.00} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 44 {LOAD togs_cima33.conf} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 45 {TRACKCURPOS} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 46 {ALFAANGLE 19} 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 50 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Dec-14 18:58:37 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: run_command_file 121214.cmd 1 1 23 2012-Dec-14 18:58:37 LOG4 run_command_file: Calling 'run_command_file 121214.cmd 1 1 23' 2012-Dec-14 18:58:37 BEGIN begin_task: Starting task 'running command file '121214.cmd'' 2012-Dec-14 18:58:37 LOG5 begin_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2012-Dec-14 18:58:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '121214.cmd' ...} 2012-Dec-14 18:58:37 NOTE run_command_file: Starting execution of command file '121214.cmd' from line 1 2012-Dec-14 18:58:37 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2012-Dec-14 18:58:37 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Dec-14 18:58:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 18:58:37 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Dec-14 18:58:37 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2012-Dec-14 18:58:37 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95767 J 2012-Dec-14 18:58:37 LOG2 CIMA-antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 18:58:37 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 82717 2012 349 0.0 2012-Dec-14 18:58:37 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Dec-14 18:58:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Dec-14 18:58:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 18:58:39 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Dec-14 18:58:39 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Dec-14 18:58:39 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Dec-14 18:58:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Dec-14 18:58:39 LOG1 config_iflo: Receiver ALFA already selected 2012-Dec-14 18:58:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 18:58:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 18:58:40 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 18:58:40 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Dec-14 18:58:40 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 18:58:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 18:58:40 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Dec-14 18:58:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 18:58:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 18:58:40 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2012-Dec-14 18:58:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Dec-14 18:58:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2012-Dec-14 18:58:40 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2012-Dec-14 18:58:40 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2012-Dec-14 18:58:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Dec-14 18:58:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:58:40 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Dec-14 18:58:40 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Dec-14 18:58:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 18:58:41 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Dec-14 18:58:41 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Dec-14 18:58:41 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Dec-14 18:58:41 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 DONE finish_task: DONE finished configuration: IF/LO path 2012-Dec-14 18:58:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:58:41 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Dec-14 18:58:41 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Dec-14 18:58:41 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Dec-14 18:58:41 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Dec-14 18:58:41 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Dec-14 18:58:41 START begin_task: Starting task 'selecting calibration port' 2012-Dec-14 18:58:41 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 LOG3 vw_send: To DATATAKING: calport 3 2012-Dec-14 18:58:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Dec-14 18:58:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:58:41 START begin_task: Starting task 'waiting on calport' 2012-Dec-14 18:58:41 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:41 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 18:58:41 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Dec-14 18:58:41 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2012-Dec-14 18:58:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Dec-14 18:58:42 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Dec-14 18:58:42 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Dec-14 18:58:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 18:58:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 18:58:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 18:58:42 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2012-Dec-14 18:58:42 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 18:58:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 18:58:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 18:58:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 18:58:42 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 18:58:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 18:58:42 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Dec-14 18:58:42 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Dec-14 18:58:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 18:58:42 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2012-Dec-14 18:58:42 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 18:58:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 18:58:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 18:58:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 18:58:43 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2012-Dec-14 18:58:43 LOG3 sock_errsend: To WAPPDATA: FLUSH 2012-Dec-14 18:58:43 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Dec-14 18:58:43 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2012-Dec-14 18:58:43 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Dec-14 18:58:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:58:43 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Dec-14 18:58:43 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2012-Dec-14 18:58:43 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2012-Dec-14 18:58:43 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2012-Dec-14 18:58:43 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2012-Dec-14 18:58:43 LOG3 is_if_valid: Current source data: down 219.2 138.7 536 - - 697 0.5 2012-Dec-14 18:58:43 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2012-Dec-14 18:58:43 INFO5 is_if_valid: Condition parsed as: 0 2012-Dec-14 18:58:43 INFO1 is_if_valid: Skipping line 'IF isup(galfasrc) then' 2012-Dec-14 18:58:43 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2012-Dec-14 18:58:43 INFO1 run_command_line: Skipping line 'GOTO galfasrc' in non-true conditional branch 2012-Dec-14 18:58:43 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2012-Dec-14 18:58:43 LOG3 is_if_valid: Current source data: up 232.8 18.5 UP - - 140 0.0 2012-Dec-14 18:58:43 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc2) 2012-Dec-14 18:58:43 INFO5 is_if_valid: Condition parsed as: 1 2012-Dec-14 18:58:43 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2012-Dec-14 18:58:43 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc2 nooffset nowait' 2012-Dec-14 18:58:43 BEGIN begin_task: Starting task 'tracking source 'galfasrc2'' 2012-Dec-14 18:58:43 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2012-Dec-14 18:58:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc2' ...} 2012-Dec-14 18:58:43 LOG3 track_source: Calling 'track_source galfasrc2 011400.0 +284000 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2012-Dec-14 18:58:44 START begin_task: Starting task 'sending tracking commands' 2012-Dec-14 18:58:44 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Dec-14 18:58:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc2} INFO {Slewing to source 'galfasrc2' ...} 2012-Dec-14 18:58:44 INFO1 track_source: Starting to track galfasrc2 2012-Dec-14 18:58:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc2" 2012-Dec-14 18:58:44 LOG3 vw_send: To DATATAKING: set ra 011400.0 2012-Dec-14 18:58:44 LOG3 vw_send: To DATATAKING: set dec +284000 2012-Dec-14 18:58:44 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Dec-14 18:58:44 LOG3 vw_send: To DATATAKING: pnt tr 011400.0 +284000 -CJ 2012-Dec-14 18:58:44 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2012-Dec-14 18:58:44 STOP finish_task: Finishing task 'sending tracking commands' 2012-Dec-14 18:58:44 LOG5 finish_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Dec-14 18:58:44 INFO2 finish_task: DONE finished sending: tracking commands 2012-Dec-14 18:58:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 18:58:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Dec-14 18:58:44 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Dec-14 18:58:44 STOP finish_task: Finishing task 'tracking source 'galfasrc2'' 2012-Dec-14 18:58:44 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2012-Dec-14 18:58:44 DONE finish_task: DONE finished tracking: source 'galfasrc2' 2012-Dec-14 18:58:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:58:44 END end_task: Finishing task 'tracking source 'galfasrc2'' with status 'OK' 2012-Dec-14 18:58:44 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2012-Dec-14 18:58:44 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2012-Dec-14 18:58:44 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2012-Dec-14 18:58:44 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2012-Dec-14 18:58:44 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2012-Dec-14 18:58:44 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2012-Dec-14 18:58:44 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2012-Dec-14 18:58:44 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2012-Dec-14 18:58:44 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2012-Dec-14 18:58:45 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2012-Dec-14 18:58:45 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2012-Dec-14 18:58:45 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2012-Dec-14 18:58:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2012-Dec-14 18:58:45 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2012-Dec-14 18:58:45 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2012-Dec-14 18:58:45 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Dec-14 18:58:45 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Dec-14 18:58:45 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Dec-14 18:58:45 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc2" 2012-Dec-14 18:58:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Dec-14 18:58:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Dec-14 18:58:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: set ra 011400.0 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: vw% 011400.0 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: set dec +284000 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: +284000 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: pnt tr 011400.0 +284000 -CJ 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2012-Dec-14 18:58:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Dec-14 18:59:03 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Dec-14 18:59:03 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2012-Dec-14 18:59:03 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Dec-14 18:59:03 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Dec-14 18:59:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Dec-14 18:59:03 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2012-Dec-14 18:59:03 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2012-Dec-14 18:59:03 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2012-Dec-14 18:59:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:59:03 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2012-Dec-14 18:59:03 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2012-Dec-14 18:59:03 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2012-Dec-14 18:59:03 BEGIN begin_task: Starting task 'waiting on telescope' 2012-Dec-14 18:59:03 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2012-Dec-14 18:59:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Dec-14 18:59:03 LOG3 waittrk: Start waittrk 5 2012-Dec-14 18:59:03 START begin_task: Starting task 'waiting on telescope movement' 2012-Dec-14 18:59:03 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Dec-14 18:59:08 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Dec-14 18:59:08 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Dec-14 18:59:08 START begin_task: Starting task 'waiting on telescope on source' 2012-Dec-14 18:59:08 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2012-Dec-14 18:59:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Dec-14 18:59:09 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2012-Dec-14 18:59:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Dec-14 18:59:09 INFO2 waittrk: Now tracking galfasrc2 2012-Dec-14 18:59:09 LOG4 waittrk: Current telescope position: Az = 232.21 ZA = 18.45 2012-Dec-14 18:59:09 STOP finish_task: Finishing task 'waiting on telescope' 2012-Dec-14 18:59:09 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2012-Dec-14 18:59:09 DONE finish_task: DONE finished waiting: telescope on source 2012-Dec-14 18:59:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 18:59:09 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Dec-14 18:59:09 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2012-Dec-14 18:59:09 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Dec-14 18:59:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2012-Dec-14 18:59:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 18:59:09 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Dec-14 18:59:09 BEGIN begin_task: Starting task 'smart frequency switching' 2012-Dec-14 18:59:09 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2012-Dec-14 18:59:09 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc2' 2012-Dec-14 18:59:09 INFO1 smartfreq: Starting pattern: Smart frequency switching 2012-Dec-14 18:59:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2012-Dec-14 18:59:10 START begin_task: Starting task 'selecting calibration type' 2012-Dec-14 18:59:10 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Dec-14 18:59:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Dec-14 18:59:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:59:10 START begin_task: Starting task 'waiting on setcal' 2012-Dec-14 18:59:10 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Dec-14 18:59:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:59:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:10 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 18:59:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Dec-14 18:59:10 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Dec-14 18:59:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 18:59:10 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Dec-14 18:59:10 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 18:59:10 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 18:59:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 18:59:10 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 18:59:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Dec-14 18:59:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 18:59:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 18:59:10 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 18:59:10 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:10 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 18:59:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 18:59:10 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2012-Dec-14 18:59:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 18:59:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 18:59:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Dec-14 18:59:11 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Dec-14 18:59:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 18:59:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 18:59:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 18:59:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 18:59:11 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20121214.a2048.0000.fits' is empty! 2012-Dec-14 18:59:11 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2012-Dec-14 18:59:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Dec-14 18:59:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Dec-14 18:59:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 18:59:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 18:59:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 18:59:11 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2012-Dec-14 18:59:11 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 18:59:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 18:59:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 18:59:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 18:59:11 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2012-Dec-14 18:59:11 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Dec-14 18:59:11 START begin_task: Starting task 'adjusting WAPP power' 2012-Dec-14 18:59:11 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Dec-14 18:59:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Dec-14 18:59:11 INFO2 adjust_power: Starting to adjust WAPP power 2012-Dec-14 18:59:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Dec-14 18:59:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Dec-14 18:59:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:59:11 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Dec-14 18:59:11 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Dec-14 18:59:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Dec-14 18:59:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 18:59:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 18:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:14 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 18:59:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Dec-14 18:59:14 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Dec-14 18:59:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Dec-14 18:59:14 START begin_task: Starting task 'adjusting WAPP power' 2012-Dec-14 18:59:14 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Dec-14 18:59:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Dec-14 18:59:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 18:59:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 18:59:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 18:59:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 18:59:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Dec-14 18:59:14 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2012-Dec-14 18:59:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Dec-14 18:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 5 8 dB 2012-Dec-14 18:59:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 6 dB --- beam 3: 6 5 dB 2012-Dec-14 18:59:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 10 7 dB 2012-Dec-14 18:59:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 4 dB --- beam 7: 10 5 dB 2012-Dec-14 18:59:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Dec-14 18:59:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Dec-14 18:59:15 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2012-Dec-14 18:59:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.074 1.009 ALFA beam 1: 1.050 1.063 2012-Dec-14 18:59:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.909 1.037 ALFA beam 3: 1.048 0.987 2012-Dec-14 18:59:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.981 0.970 ALFA beam 5: 0.946 0.916 2012-Dec-14 18:59:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.962 0.980 ALFA beam 7: 1.080 0.929 2012-Dec-14 18:59:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Dec-14 18:59:15 LOG5 finish_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Dec-14 18:59:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Dec-14 18:59:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 18:59:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Dec-14 18:59:15 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Dec-14 18:59:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Dec-14 18:59:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Dec-14 18:59:15 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Dec-14 18:59:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Dec-14 18:59:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 18:59:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Dec-14 18:59:15 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Dec-14 18:59:15 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Dec-14 18:59:15 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 18:59:15 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 18:59:15 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 18:59:15 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 18:59:15 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 18:59:15 LOG2 antvel: Parameters to Doppler: Topocentric 82755 2012 349 0.0 2012-Dec-14 18:59:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 18:59:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 18:59:16 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 18:59:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 18:59:16 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 18:59:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 18:59:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Dec-14 18:59:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 18:59:16 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2012-Dec-14 18:59:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 18:59:16 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.138040 2012.9576759639517 18.999933 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666679 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 1 1.227172519297061 28.598202840377478 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 2 1.234402046593989 28.574667978297818 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 3 1.240582485906359 28.642818971787385 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 4 1.239493714637122 28.735224368028941 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 5 1.232224870402886 28.758733802713952 2012-Dec-14 18:59:16 LOG4 log_alfabeam: ALFABEAM 6 1.226084295743204 28.689864271379143 2012-Dec-14 18:59:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900001 2012-Dec-14 18:59:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 18:59:16 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2012-Dec-14 18:59:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 18:59:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 18:59:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 18:59:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82757.00 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 18:59:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 18:59:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 18:59:27 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2012-Dec-14 18:59:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 18:59:27 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2012-Dec-14 18:59:27 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Dec-14 18:59:27 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 18:59:27 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 18:59:27 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 18:59:27 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 18:59:27 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 18:59:27 LOG2 antvel: Parameters to Doppler: Topocentric 82767 2012 349 0.0 2012-Dec-14 18:59:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 18:59:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 18:59:27 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 18:59:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 18:59:27 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 18:59:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 18:59:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Dec-14 18:59:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 18:59:28 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2012-Dec-14 18:59:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 18:59:28 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.141382 2012.9576763442087 18.999933 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 28.666666666666679 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 1 1.227180848866364 28.598073214080355 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 2 1.234413190968587 28.574690706405189 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 3 1.240585387309284 28.642971212506357 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 4 1.239485351577619 28.735354330155094 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 5 1.232213614826091 28.758710389846037 2012-Dec-14 18:59:28 LOG4 log_alfabeam: ALFABEAM 6 1.226081490344870 28.689710791609411 2012-Dec-14 18:59:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900002 2012-Dec-14 18:59:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 18:59:28 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2012-Dec-14 18:59:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 18:59:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 18:59:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 18:59:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82769.00 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 18:59:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 18:59:39 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2012-Dec-14 18:59:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 18:59:39 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2012-Dec-14 18:59:39 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Dec-14 18:59:39 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 18:59:39 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 18:59:39 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 18:59:39 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 18:59:39 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 18:59:39 LOG2 antvel: Parameters to Doppler: Topocentric 82779 2012 349 0.0 2012-Dec-14 18:59:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 18:59:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 18:59:39 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 18:59:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 18:59:39 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 18:59:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 18:59:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Dec-14 18:59:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 18:59:40 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2012-Dec-14 18:59:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 18:59:40 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.144724 2012.9576767244657 18.999933 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 28.666666666666661 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 1 1.227189224387885 28.597943295059711 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 2 1.234424372904895 28.574713752047725 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 3 1.240588280665788 28.643124065979848 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 4 1.239476942310324 28.735484584904270 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 5 1.232202321415393 28.758686652747372 2012-Dec-14 18:59:40 LOG4 log_alfabeam: ALFABEAM 6 1.226078693664330 28.689556697544827 2012-Dec-14 18:59:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900003 2012-Dec-14 18:59:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 18:59:40 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2012-Dec-14 18:59:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 18:59:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 18:59:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 18:59:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82781.00 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 18:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 18:59:51 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2012-Dec-14 18:59:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 18:59:51 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2012-Dec-14 18:59:51 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Dec-14 18:59:51 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 18:59:51 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 18:59:51 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 18:59:51 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 18:59:51 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 18:59:51 LOG2 antvel: Parameters to Doppler: Topocentric 82791 2012 349 0.0 2012-Dec-14 18:59:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 18:59:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 18:59:51 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 18:59:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 18:59:52 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 18:59:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 18:59:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Dec-14 18:59:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 18:59:52 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2012-Dec-14 18:59:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 18:59:52 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.148067 2012.9576771047227 18.999933 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 28.666666666666679 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 1 1.227197648697389 28.597813044100096 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 2 1.234435595918985 28.574737125199853 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 3 1.240591166683440 28.643277581399076 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 4 1.239468483987490 28.735615171579319 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 5 1.232190986621905 28.758662581178431 2012-Dec-14 18:59:52 LOG4 log_alfabeam: ALFABEAM 6 1.226075905027842 28.689401939647485 2012-Dec-14 18:59:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900004 2012-Dec-14 18:59:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 18:59:52 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2012-Dec-14 18:59:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 18:59:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 18:59:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 18:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 18:59:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 18:59:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82793.00 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 18:59:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:00:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:00:03 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2012-Dec-14 19:00:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:00:03 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2012-Dec-14 19:00:03 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Dec-14 19:00:03 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:00:03 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:00:03 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:00:03 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:00:03 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:00:03 LOG2 antvel: Parameters to Doppler: Topocentric 82803 2012 349 0.0 2012-Dec-14 19:00:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:00:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:00:03 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:00:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:00:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:00:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:00:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Dec-14 19:00:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:00:03 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2012-Dec-14 19:00:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:00:04 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.151409 2012.9576774849797 18.999933 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666675 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 1 1.227206117065968 28.597682538931153 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 2 1.234446853449975 28.574760814841017 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 3 1.240594043479131 28.643431670112616 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 4 1.239459981356614 28.735746012236334 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 5 1.232179617074097 28.758638186521864 2012-Dec-14 19:00:04 LOG4 log_alfabeam: ALFABEAM 6 1.226073126264876 28.689246607337761 2012-Dec-14 19:00:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900005 2012-Dec-14 19:00:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:00:04 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2012-Dec-14 19:00:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:00:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82805.00 2012-Dec-14 19:00:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:00:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:00:15 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2012-Dec-14 19:00:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:00:15 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2012-Dec-14 19:00:15 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Dec-14 19:00:15 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:00:15 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:00:15 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:00:15 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:00:15 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:00:15 LOG2 antvel: Parameters to Doppler: Topocentric 82815 2012 349 0.0 2012-Dec-14 19:00:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:00:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:00:15 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:00:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:00:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:00:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:00:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Dec-14 19:00:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:00:16 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2012-Dec-14 19:00:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:00:16 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.154752 2012.957677865237 18.999933 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666679 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 1 1.227214634874775 28.597551701272845 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 2 1.234458152388510 28.574784838140062 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 3 1.240596912615858 28.643586427540086 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 4 1.239451429014226 28.735877185342659 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 5 1.232168205814992 28.758613451130898 2012-Dec-14 19:00:16 LOG4 log_alfabeam: ALFABEAM 6 1.226070355875727 28.689090604478068 2012-Dec-14 19:00:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900006 2012-Dec-14 19:00:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:00:16 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2012-Dec-14 19:00:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:00:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:00:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:00:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82817.00 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:00:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:00:27 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2012-Dec-14 19:00:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:00:27 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2012-Dec-14 19:00:27 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Dec-14 19:00:27 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:00:27 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:00:27 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:00:27 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:00:27 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:00:27 LOG2 antvel: Parameters to Doppler: Topocentric 82827 2012 349 0.0 2012-Dec-14 19:00:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:00:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:00:27 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:00:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:00:27 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:00:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:00:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Dec-14 19:00:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:00:28 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Dec-14 19:00:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:00:28 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.158094 2012.957678245494 18.999933 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666679 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 1 1.227223197343260 28.597420609235972 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 2 1.234469486128566 28.574809183743508 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 3 1.240599772216571 28.643741764313674 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 4 1.239442831759747 28.736008612573148 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 5 1.232156759518586 28.758588386728569 2012-Dec-14 19:00:28 LOG4 log_alfabeam: ALFABEAM 6 1.226067595683050 28.688934021208123 2012-Dec-14 19:00:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900007 2012-Dec-14 19:00:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:00:28 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2012-Dec-14 19:00:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:00:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:00:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:00:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82829.00 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:00:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:00:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:00:39 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2012-Dec-14 19:00:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:00:39 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Dec-14 19:00:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Dec-14 19:00:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Dec-14 19:00:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Dec-14 19:00:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:00:39 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Dec-14 19:00:39 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:00:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Dec-14 19:00:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:00:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:00:39 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Dec-14 19:00:39 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Dec-14 19:00:39 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:00:39 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:00:40 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:00:40 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:00:40 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:00:40 LOG2 antvel: Parameters to Doppler: Topocentric 82839 2012 349 0.0 2012-Dec-14 19:00:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:00:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:00:40 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:00:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:00:40 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:00:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:00:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Dec-14 19:00:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:00:40 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2012-Dec-14 19:00:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:00:40 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.161437 2012.957678625751 18.999933 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 28.666666666666679 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 1 1.227231809913235 28.597289184219935 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 2 1.234480861606653 28.574833869269273 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 3 1.240602623829877 28.643897776626552 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 4 1.239434184128732 28.736140372715028 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 5 1.232145271181799 28.758562975209919 2012-Dec-14 19:00:40 LOG4 log_alfabeam: ALFABEAM 6 1.226064844202394 28.688776760616165 2012-Dec-14 19:00:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900008 2012-Dec-14 19:00:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:00:41 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2012-Dec-14 19:00:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:00:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:00:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:00:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82842.00 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:00:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:00:52 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2012-Dec-14 19:00:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:00:52 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2012-Dec-14 19:00:52 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Dec-14 19:00:52 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:00:52 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:00:52 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:00:52 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:00:52 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:00:52 LOG2 antvel: Parameters to Doppler: Topocentric 82852 2012 349 0.0 2012-Dec-14 19:00:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:00:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:00:52 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:00:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:00:52 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:00:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:00:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Dec-14 19:00:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:00:53 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2012-Dec-14 19:00:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:00:53 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.165058 2012.9576790376962 18.999933 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 28.666666666666664 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 1 1.227241192707279 28.597146498436395 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 2 1.234493226504008 28.574860986520100 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 3 1.240605702410746 28.644067476314685 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 4 1.239424763057315 28.736283421286906 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 5 1.232132783738362 28.758535063652086 2012-Dec-14 19:00:53 LOG4 log_alfabeam: ALFABEAM 6 1.226061874870662 28.688605707285099 2012-Dec-14 19:00:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900009 2012-Dec-14 19:00:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:00:53 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2012-Dec-14 19:00:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:00:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:00:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:00:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:00:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:00:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82854.00 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:01:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:01:04 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2012-Dec-14 19:01:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:01:04 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2012-Dec-14 19:01:04 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Dec-14 19:01:04 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:01:04 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:01:04 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:01:04 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:01:04 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:01:04 LOG2 antvel: Parameters to Doppler: Topocentric 82864 2012 349 0.0 2012-Dec-14 19:01:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:01:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:01:04 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:01:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:01:04 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:01:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:01:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Dec-14 19:01:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:01:04 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Dec-14 19:01:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:01:05 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.168400 2012.9576794179532 18.999933 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 28.666666666666679 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 1 1.227249902740567 28.597014500523866 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 2 1.234504678938563 28.574886367357582 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 3 1.240608534222213 28.644224762535387 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 4 1.239416017416480 28.736415753829210 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 5 1.232121217922020 28.758508942319388 2012-Dec-14 19:01:05 LOG4 log_alfabeam: ALFABEAM 6 1.226059144624303 28.688447170312863 2012-Dec-14 19:01:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900010 2012-Dec-14 19:01:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:01:05 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2012-Dec-14 19:01:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:01:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82866.00 2012-Dec-14 19:01:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:01:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:01:07 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:01:07.301 (seconds: 68467.301)!} 2012-Dec-14 19:01:07 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:01:07.301 (seconds: 68467.301)! 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:08 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 68466.0 to 68467.0! 2012-Dec-14 19:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:09 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (68466.0 - 68468.0)! 2012-Dec-14 19:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:01:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:01:16 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2012-Dec-14 19:01:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:01:16 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Dec-14 19:01:16 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Dec-14 19:01:16 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:01:16 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:01:16 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:01:16 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:01:16 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:01:16 LOG2 antvel: Parameters to Doppler: Topocentric 82876 2012 349 0.0 2012-Dec-14 19:01:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:01:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:01:16 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:01:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:01:16 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:01:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:01:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Dec-14 19:01:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:01:17 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2012-Dec-14 19:01:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:01:17 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.171743 2012.9576797982102 18.999933 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666679 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 1 1.227258663912639 28.596882169001500 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 2 1.234516173621824 28.574912098006962 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 3 1.240611357523190 28.644382734928307 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 4 1.239407220355929 28.736548419868988 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 5 1.232109609557051 28.758482463796092 2012-Dec-14 19:01:17 LOG4 log_alfabeam: ALFABEAM 6 1.226056423628336 28.688287945472268 2012-Dec-14 19:01:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900011 2012-Dec-14 19:01:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:01:17 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2012-Dec-14 19:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:01:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:01:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:01:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82878.00 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:19 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:19 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:01:28 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2012-Dec-14 19:01:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:01:28 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2012-Dec-14 19:01:28 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Dec-14 19:01:28 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:01:28 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:01:28 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:01:28 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:01:28 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:01:28 LOG2 antvel: Parameters to Doppler: Topocentric 82888 2012 349 0.0 2012-Dec-14 19:01:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:01:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:01:29 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:01:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:01:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:01:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:01:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Dec-14 19:01:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:01:29 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2012-Dec-14 19:01:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:01:29 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.175085 2012.9576801784672 18.999933 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666679 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 1 1.227267471308487 28.596749582955820 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 2 1.234527703831112 28.574938166240159 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 3 1.240614170453320 28.644541302268799 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 4 1.239398376810294 28.736681340104759 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 5 1.232097965435060 28.758455640699296 2012-Dec-14 19:01:29 LOG4 log_alfabeam: ALFABEAM 6 1.226053713686693 28.688128124766958 2012-Dec-14 19:01:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900012 2012-Dec-14 19:01:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:01:29 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2012-Dec-14 19:01:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:01:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:01:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:01:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82890.00 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:01:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:01:40 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2012-Dec-14 19:01:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:01:40 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2012-Dec-14 19:01:40 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Dec-14 19:01:40 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:01:40 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:01:40 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:01:40 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:01:40 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:01:40 LOG2 antvel: Parameters to Doppler: Topocentric 82900 2012 349 0.0 2012-Dec-14 19:01:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:01:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:01:40 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:01:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:01:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:01:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:01:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Dec-14 19:01:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:01:41 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Dec-14 19:01:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:01:41 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.178428 2012.9576805587244 18.999933 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666679 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 1 1.227276330527684 28.596616662975855 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 2 1.234539276620950 28.574964590853885 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 3 1.240616974522471 28.644700562749595 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 4 1.239389481156519 28.736814594132394 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 5 1.232086278434358 28.758428453721457 2012-Dec-14 19:01:41 LOG4 log_alfabeam: ALFABEAM 6 1.226051013355959 28.687967609284488 2012-Dec-14 19:01:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900013 2012-Dec-14 19:01:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:01:41 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2012-Dec-14 19:01:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:01:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82902.00 2012-Dec-14 19:01:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:01:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:01:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:01:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:01:52 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2012-Dec-14 19:01:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:01:52 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Dec-14 19:01:52 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Dec-14 19:01:52 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:01:52 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:01:52 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:01:52 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:01:52 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:01:52 LOG2 antvel: Parameters to Doppler: Topocentric 82912 2012 349 0.0 2012-Dec-14 19:01:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:01:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:01:52 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:01:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:01:52 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:01:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:01:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Dec-14 19:01:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:01:53 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2012-Dec-14 19:01:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:01:53 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.181770 2012.9576809389814 18.999933 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 28.666666666666664 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 1 1.227285236601005 28.596483488534844 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 2 1.234550885222020 28.574991359264221 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 3 1.240619767877429 28.644860424401088 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 4 1.239380538383740 28.736948102263465 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 5 1.232074555393582 28.758400915843190 2012-Dec-14 19:01:53 LOG4 log_alfabeam: ALFABEAM 6 1.226048324432133 28.687806491776129 2012-Dec-14 19:01:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900014 2012-Dec-14 19:01:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:01:53 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2012-Dec-14 19:01:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:01:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:01:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:01:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:01:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:01:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82914.00 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:01:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:02:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:02:04 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2012-Dec-14 19:02:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:02:04 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2012-Dec-14 19:02:04 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2012-Dec-14 19:02:04 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2012-Dec-14 19:02:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Dec-14 19:02:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:02:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:02:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:02:04 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Dec-14 19:02:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:02:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:02:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:02:05 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Dec-14 19:02:05 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Dec-14 19:02:05 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Dec-14 19:02:05 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:02:05 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:02:05 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:02:05 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:02:05 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:02:05 LOG2 antvel: Parameters to Doppler: Topocentric 82924 2012 349 0.0 2012-Dec-14 19:02:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:02:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:02:05 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:02:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:02:05 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:02:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:02:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Dec-14 19:02:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:02:05 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Dec-14 19:02:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:02:05 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.185112 2012.9576813192384 18.999933 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666661 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 1 1.227294192504247 28.596350019885691 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 2 1.234562533244546 28.575018482577580 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 3 1.240622551180603 28.645020938088877 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 4 1.239371545503429 28.737081904329528 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 5 1.232062792669437 28.758373015671300 2012-Dec-14 19:02:05 LOG4 log_alfabeam: ALFABEAM 6 1.226045646288580 28.687644721032630 2012-Dec-14 19:02:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900015 2012-Dec-14 19:02:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:02:06 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2012-Dec-14 19:02:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:02:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:02:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:02:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82927.00 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:02:17 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2012-Dec-14 19:02:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:02:17 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Dec-14 19:02:17 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Dec-14 19:02:17 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:02:17 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:02:17 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:02:17 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:02:17 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:02:17 LOG2 antvel: Parameters to Doppler: Topocentric 82937 2012 349 0.0 2012-Dec-14 19:02:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:02:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:02:17 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:02:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:02:17 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:02:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Dec-14 19:02:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:02:18 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2012-Dec-14 19:02:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:02:18 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.188733 2012.9576817311836 18.999933 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666679 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 1 1.227303952705246 28.596205076791680 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 2 1.234575198352625 28.575048274618602 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 3 1.240625555287615 28.645195591760441 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 4 1.239361744922878 28.737227208348450 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 5 1.232050002989741 28.758342373505592 2012-Dec-14 19:02:18 LOG4 log_alfabeam: ALFABEAM 6 1.226042756948153 28.687468704046797 2012-Dec-14 19:02:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900016 2012-Dec-14 19:02:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:02:18 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2012-Dec-14 19:02:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:02:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:02:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:02:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82939.00 2012-Dec-14 19:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:20 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=2+3-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=2+3-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+2+3-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+2+3-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:20 LOG3 WAPP=1+2+3-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:02:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:02:29 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2012-Dec-14 19:02:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:02:29 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2012-Dec-14 19:02:29 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Dec-14 19:02:29 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:02:29 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:02:29 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:02:29 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:02:29 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:02:29 LOG2 antvel: Parameters to Doppler: Topocentric 82949 2012 349 0.0 2012-Dec-14 19:02:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:02:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:02:29 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:02:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:02:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:02:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:02:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Dec-14 19:02:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:02:29 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Dec-14 19:02:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:02:30 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.192076 2012.9576821114406 18.999933 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666664 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 1 1.227313016226883 28.596070954982999 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 2 1.234586932520687 28.575076156347500 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 3 1.240628317891785 28.645357523219417 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 4 1.239352643828428 28.737361663053370 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 5 1.232038153543380 28.758313699087640 2012-Dec-14 19:02:30 LOG4 log_alfabeam: ALFABEAM 6 1.226040101069180 28.687305512761217 2012-Dec-14 19:02:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900017 2012-Dec-14 19:02:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:02:30 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Dec-14 19:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:02:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:02:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82951.00 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:02:41 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Dec-14 19:02:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:02:41 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Dec-14 19:02:41 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Dec-14 19:02:41 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:02:41 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:02:41 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:02:41 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:02:41 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:02:41 LOG2 antvel: Parameters to Doppler: Topocentric 82961 2012 349 0.0 2012-Dec-14 19:02:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:02:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:02:42 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:02:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:02:42 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:02:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:02:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Dec-14 19:02:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:02:42 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2012-Dec-14 19:02:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:02:42 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.195418 2012.9576824916976 18.999933 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666661 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 1 1.227322127916207 28.595936579064652 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 2 1.234598703081820 28.575104394921055 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 3 1.240631069053538 28.645520068698659 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 4 1.239343494294023 28.737496371445772 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 5 1.232026267479952 28.758284660483355 2012-Dec-14 19:02:42 LOG4 log_alfabeam: ALFABEAM 6 1.226037457344452 28.687141706734394 2012-Dec-14 19:02:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900018 2012-Dec-14 19:02:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:02:42 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2012-Dec-14 19:02:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:02:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:02:42 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:02:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:02:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82963.00 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:02:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:02:53 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2012-Dec-14 19:02:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:02:53 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2012-Dec-14 19:02:53 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Dec-14 19:02:53 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:02:53 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:02:53 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:02:53 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:02:53 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:02:53 LOG2 antvel: Parameters to Doppler: Topocentric 82973 2012 349 0.0 2012-Dec-14 19:02:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:02:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:02:53 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:02:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:02:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:02:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:02:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Dec-14 19:02:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:02:54 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2012-Dec-14 19:02:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:02:54 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.198761 2012.9576828719548 18.999933 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666664 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 1 1.227331293568610 28.595801868666165 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 2 1.234610517234344 28.575133010620402 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 3 1.240633810231988 28.645683328847785 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 4 1.239334290499709 28.737631414078429 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 5 1.232014337533219 28.758255236871126 2012-Dec-14 19:02:54 LOG4 log_alfabeam: ALFABEAM 6 1.226034824384117 28.686977184596426 2012-Dec-14 19:02:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900019 2012-Dec-14 19:02:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:02:54 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2012-Dec-14 19:02:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:02:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:02:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:02:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:02:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82975.00 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:56 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:02:56 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:02:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:03:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:03:05 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2012-Dec-14 19:03:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:03:05 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2012-Dec-14 19:03:05 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Dec-14 19:03:05 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:03:05 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:03:05 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:03:05 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:03:05 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:03:05 LOG2 antvel: Parameters to Doppler: Topocentric 82985 2012 349 0.0 2012-Dec-14 19:03:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:03:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:03:05 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:03:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:03:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:03:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:03:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Dec-14 19:03:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:03:06 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2012-Dec-14 19:03:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:03:06 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.202103 2012.9576832522118 18.999933 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333331 28.666666666666693 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 1 1.227340508045302 28.595666904445650 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 2 1.234622368064462 28.575161989737786 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 3 1.240636539597586 28.645847209380126 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 4 1.239325037605162 28.737766710077707 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 5 1.232002370687517 28.758225442380116 2012-Dec-14 19:03:06 LOG4 log_alfabeam: ALFABEAM 6 1.226032203957966 28.686812041423885 2012-Dec-14 19:03:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900020 2012-Dec-14 19:03:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:03:06 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2012-Dec-14 19:03:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:03:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82987.00 2012-Dec-14 19:03:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:03:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:03:17 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2012-Dec-14 19:03:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:03:17 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2012-Dec-14 19:03:17 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Dec-14 19:03:17 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:03:17 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:03:17 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:03:17 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:03:17 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:03:17 LOG2 antvel: Parameters to Doppler: Topocentric 82997 2012 349 0.0 2012-Dec-14 19:03:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:03:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:03:17 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:03:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:03:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:03:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:03:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Dec-14 19:03:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:03:18 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2012-Dec-14 19:03:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:03:18 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.205446 2012.9576836324688 18.999933 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666661 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 1 1.227349777207761 28.595531605720268 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 2 1.234634262818392 28.575191353060539 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 3 1.240639258591656 28.646011811768496 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 4 1.239315729723976 28.737902340307858 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 5 1.231990359628477 28.758195255672504 2012-Dec-14 19:03:18 LOG4 log_alfabeam: ALFABEAM 6 1.226029594694872 28.686646175023633 2012-Dec-14 19:03:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900021 2012-Dec-14 19:03:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:03:18 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2012-Dec-14 19:03:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:03:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82999.00 2012-Dec-14 19:03:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:03:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:03:29 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2012-Dec-14 19:03:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:03:29 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2012-Dec-14 19:03:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Dec-14 19:03:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Dec-14 19:03:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Dec-14 19:03:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:03:29 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2012-Dec-14 19:03:29 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:03:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Dec-14 19:03:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:03:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:03:29 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2012-Dec-14 19:03:29 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Dec-14 19:03:29 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:03:30 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:03:30 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:03:30 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:03:30 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:03:30 LOG2 antvel: Parameters to Doppler: Topocentric 83009 2012 349 0.0 2012-Dec-14 19:03:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:03:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:03:30 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:03:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:03:30 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:03:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:03:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Dec-14 19:03:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:03:30 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Dec-14 19:03:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:03:30 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.208788 2012.9576840127258 18.999933 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333335 28.666666666666661 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 1 1.227359095859879 28.595396053540529 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 2 1.234646194533944 28.575221086497187 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 3 1.240641965393151 28.646177040947236 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 4 1.239306372073498 28.738038223502798 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 5 1.231978311389218 28.758164691269556 2012-Dec-14 19:03:30 LOG4 log_alfabeam: ALFABEAM 6 1.226026998355293 28.686479681253832 2012-Dec-14 19:03:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900022 2012-Dec-14 19:03:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:03:31 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2012-Dec-14 19:03:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:03:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:03:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:03:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83012.00 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:03:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:03:42 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2012-Dec-14 19:03:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:03:42 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Dec-14 19:03:42 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Dec-14 19:03:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:03:42 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:03:42 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:03:42 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:03:42 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:03:42 LOG2 antvel: Parameters to Doppler: Topocentric 83022 2012 349 0.0 2012-Dec-14 19:03:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:03:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:03:42 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:03:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:03:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:03:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:03:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Dec-14 19:03:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:03:43 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2012-Dec-14 19:03:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:03:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.212409 2012.957684424671 18.999933 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666664 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 1 1.227369251848578 28.595248853505282 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 2 1.234659168250897 28.575253733839173 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 3 1.240644885096093 28.646356830839043 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 4 1.239296173499788 28.738185781726418 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 5 1.231965211136440 28.758131134682497 2012-Dec-14 19:03:43 LOG4 log_alfabeam: ALFABEAM 6 1.226024199203715 28.686298520161625 2012-Dec-14 19:03:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900023 2012-Dec-14 19:03:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:03:43 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:03:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:03:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83024.00 2012-Dec-14 19:03:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:03:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:03:54 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2012-Dec-14 19:03:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:03:54 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2012-Dec-14 19:03:54 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Dec-14 19:03:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:03:54 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:03:54 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:03:54 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95768 J 2012-Dec-14 19:03:54 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:03:54 LOG2 antvel: Parameters to Doppler: Topocentric 83034 2012 349 0.0 2012-Dec-14 19:03:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:03:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:03:54 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:03:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:03:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:03:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:03:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Dec-14 19:03:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:03:55 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2012-Dec-14 19:03:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:03:55 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.215752 2012.957684804928 18.999933 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333329 28.666666666666675 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 1 1.227378683333261 28.595112648670572 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 2 1.234671188471873 28.575284277081490 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 3 1.240647568358568 28.646523529271466 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 4 1.239286702391851 28.738322316804965 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 5 1.231953073833306 28.758099743708872 2012-Dec-14 19:03:55 LOG4 log_alfabeam: ALFABEAM 6 1.226021628044076 28.686130554883931 2012-Dec-14 19:03:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900024 2012-Dec-14 19:03:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:03:55 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2012-Dec-14 19:03:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:03:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:03:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:03:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:03:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83036.00 2012-Dec-14 19:03:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:03:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:57 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=2+3-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=2+3-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+2+3-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+2+3-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:03:57 LOG3 WAPP=1+2+3-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:03:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:04:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:04:06 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2012-Dec-14 19:04:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:04:06 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2012-Dec-14 19:04:06 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Dec-14 19:04:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:04:06 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:04:06 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:04:06 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95769 J 2012-Dec-14 19:04:06 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:04:06 LOG2 antvel: Parameters to Doppler: Topocentric 83046 2012 349 0.0 2012-Dec-14 19:04:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:04:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:04:06 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:04:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:04:06 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:04:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:04:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Dec-14 19:04:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:04:06 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Dec-14 19:04:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:04:07 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.219094 2012.9576851851853 18.999933 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666661 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 1 1.227388165350663 28.594976191111869 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 2 1.234683246091060 28.575315201005033 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 3 1.240650238824323 28.646690864456190 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 4 1.239277180465764 28.738459104063292 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 5 1.231940898917986 28.758067964283420 2012-Dec-14 19:04:07 LOG4 log_alfabeam: ALFABEAM 6 1.226019070427039 28.685961952391501 2012-Dec-14 19:04:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900025 2012-Dec-14 19:04:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:04:07 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2012-Dec-14 19:04:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:04:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:04:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83048.00 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:04:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:04:18 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2012-Dec-14 19:04:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:04:18 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Dec-14 19:04:18 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Dec-14 19:04:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:04:18 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:04:18 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:04:18 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95769 J 2012-Dec-14 19:04:18 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:04:18 LOG2 antvel: Parameters to Doppler: Topocentric 83058 2012 349 0.0 2012-Dec-14 19:04:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:04:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:04:18 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:04:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:04:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:04:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:04:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Dec-14 19:04:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:04:19 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2012-Dec-14 19:04:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:04:19 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.222437 2012.9576855654423 18.999933 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333333 28.666666666666661 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 1 1.227397703934157 28.594839399360257 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 2 1.234695348477769 28.575346527725852 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 3 1.240652897886890 28.646858939992828 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 4 1.239267601662276 28.738596225149113 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 5 1.231928678952475 28.758035773713431 2012-Dec-14 19:04:19 LOG4 log_alfabeam: ALFABEAM 6 1.226016525031721 28.685792608365265 2012-Dec-14 19:04:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900026 2012-Dec-14 19:04:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:04:19 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2012-Dec-14 19:04:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:04:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:04:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:04:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83060.00 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:04:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:04:30 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2012-Dec-14 19:04:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:04:30 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2012-Dec-14 19:04:30 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Dec-14 19:04:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:04:30 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:04:30 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:04:30 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95769 J 2012-Dec-14 19:04:30 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:04:30 LOG2 antvel: Parameters to Doppler: Topocentric 83070 2012 349 0.0 2012-Dec-14 19:04:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:04:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:04:30 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:04:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:04:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:04:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:04:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Dec-14 19:04:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:04:31 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Dec-14 19:04:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:04:31 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.225779 2012.9576859456993 18.999933 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666664 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 1 1.227407293738264 28.594702355469202 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 2 1.234707488544821 28.575378242144012 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 3 1.240655543748411 28.647027658796546 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 4 1.239257971348936 28.738733597793352 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 5 1.231916421095863 28.758003187550742 2012-Dec-14 19:04:31 LOG4 log_alfabeam: ALFABEAM 6 1.226013993593136 28.685622620688786 2012-Dec-14 19:04:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900027 2012-Dec-14 19:04:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:04:31 LOG5 begin_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2012-Dec-14 19:04:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:04:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83072.00 2012-Dec-14 19:04:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:04:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:04:42 LOG5 end_task: Level: (4) ID = <10102> Status = 0 0 0 0 ok 2012-Dec-14 19:04:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:04:42 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Dec-14 19:04:42 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Dec-14 19:04:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:04:42 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:04:42 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:04:42 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95769 J 2012-Dec-14 19:04:42 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:04:42 LOG2 antvel: Parameters to Doppler: Topocentric 83082 2012 349 0.0 2012-Dec-14 19:04:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:04:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:04:42 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:04:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:04:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:04:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:04:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Dec-14 19:04:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:04:43 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Dec-14 19:04:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:04:43 LOG5 log_alfabeam: Parameters: 1.2333333333333334 28.666666666666668 0.229122 2012.9576863259563 18.999933 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 0 1.233333333333332 28.666666666666664 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 1 1.227416940865559 28.594564977664099 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 2 1.234719673710480 28.575410366915317 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 3 1.240658177782574 28.647197125317422 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 4 1.239248283396924 28.738871303948354 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 5 1.231904117861005 28.757970182552263 2012-Dec-14 19:04:43 LOG4 log_alfabeam: ALFABEAM 6 1.226011474811232 28.685451884193135 2012-Dec-14 19:04:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900028 2012-Dec-14 19:04:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:04:43 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2012-Dec-14 19:04:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:04:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83084.00 2012-Dec-14 19:04:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:04:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999967 != 99999966 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:04:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:04:54 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2012-Dec-14 19:04:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:04:54 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Dec-14 19:04:54 INFO2 smartfreq: Switching off CAL 2012-Dec-14 19:04:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:04:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:04:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:04:54 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Dec-14 19:04:54 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999967 diff = 1)! 2012-Dec-14 19:04:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:04:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:04:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:04:54 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Dec-14 19:04:54 INFO3 restore_frequencies: Restoring original frequencies 2012-Dec-14 19:04:54 LOG5 antvel: Calling 'antvel 11400.000000 284000.000000 J Topocentric 0' 2012-Dec-14 19:04:54 LOG2 antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95769 J 2012-Dec-14 19:04:54 LOG2 antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:04:54 LOG2 antvel: Parameters to Doppler: Topocentric 83094 2012 349 0.0 2012-Dec-14 19:04:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:04:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Dec-14 19:04:54 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2012-Dec-14 19:04:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:04:55 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:04:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 19:04:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:55 STOP finish_task: Finishing task 'smart frequency switching' 2012-Dec-14 19:04:55 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2012-Dec-14 19:04:55 DONE finish_task: DONE finished pattern: smart frequency switching 2012-Dec-14 19:04:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:04:55 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2012-Dec-14 19:04:55 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2012-Dec-14 19:04:55 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock_cima33.conf' 2012-Dec-14 19:04:55 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Dec-14 19:04:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 19:04:55 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Dec-14 19:04:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 19:04:55 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock_cima33.conf' 2012-Dec-14 19:04:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:04:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2012-Dec-14 19:04:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:04:55 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95769 J 2012-Dec-14 19:04:55 LOG2 CIMA-antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:04:55 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 83094 2012 349 0.0 2012-Dec-14 19:04:55 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:04:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Dec-14 19:04:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Dec-14 19:04:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Dec-14 19:04:56 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_mode) "spectra" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_millisecs) "1000.0" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_blank_ad) "0" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_adc_errors) "12" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_pfb_errors) "0" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_acc_errors) "13" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_ashift_errors) "13" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filetype) "fits" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_filepre) "a2048" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bits) "32" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled0) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards0) "both" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg0) "2-pol" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor0) "1" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags0) "8192" 2012-Dec-14 19:04:57 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset0) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled1) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards1) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg1) "2-pol" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor1) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags1) "8192" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset1) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled2) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards2) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg2) "2-pol" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor2) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags2) "8192" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset2) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled3) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards3) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg3) "2-pol" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor3) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags3) "8192" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset3) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled4) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards4) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg4) "2-pol" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor4) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags4) "8192" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset4) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled5) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards5) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg5) "2-pol" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor5) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags5) "8192" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset5) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_enabled6) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_boards6) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_cfg6) "2-pol" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_bwfactor6) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_lags6) "8192" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g1_offset6) "0.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled) "0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_mode) "spectra" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_millisecs) "1000.0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_blank_ad) "0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_adc_errors) "12" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_pfb_errors) "0" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_acc_errors) "13" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_ashift_errors) "13" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filetype) "fits" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_filepre) "a2048" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bits) "32" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled0) "1" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards0) "both" 2012-Dec-14 19:04:58 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg0) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor0) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags0) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset0) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled1) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards1) "both" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg1) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor1) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags1) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset1) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled2) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards2) "both" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg2) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor2) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags2) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset2) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled3) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards3) "both" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg3) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor3) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags3) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset3) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled4) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards4) "both" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg4) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor4) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags4) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset4) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled5) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards5) "both" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg5) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor5) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags5) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset5) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_enabled6) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_boards6) "both" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_cfg6) "2-pol" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_bwfactor6) "1" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_lags6) "8192" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_g2_offset6) "0.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adjpwr) "30" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2012-Dec-14 19:04:59 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 19:05:00 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Dec-14 19:05:00 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Dec-14 19:05:00 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Dec-14 19:05:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Dec-14 19:05:00 LOG1 config_iflo: Receiver ALFA already selected 2012-Dec-14 19:05:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:05:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:05:00 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:05:00 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Dec-14 19:05:00 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:05:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:05:00 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Dec-14 19:05:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:05:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:05:00 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2012-Dec-14 19:05:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2012-Dec-14 19:05:00 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2012-Dec-14 19:05:00 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Dec-14 19:05:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2012-Dec-14 19:05:00 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2012-Dec-14 19:05:01 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Dec-14 19:05:01 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2012-Dec-14 19:05:01 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2012-Dec-14 19:05:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Dec-14 19:05:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:01 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Dec-14 19:05:01 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:05:01 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Dec-14 19:05:01 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Dec-14 19:05:01 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Dec-14 19:05:01 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 DONE finish_task: DONE finished configuration: IF/LO path 2012-Dec-14 19:05:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:05:01 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Dec-14 19:05:01 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Dec-14 19:05:01 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Dec-14 19:05:01 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Dec-14 19:05:01 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Dec-14 19:05:01 START begin_task: Starting task 'selecting calibration port' 2012-Dec-14 19:05:01 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 LOG3 vw_send: To DATATAKING: calport 3 2012-Dec-14 19:05:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Dec-14 19:05:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:01 START begin_task: Starting task 'waiting on calport' 2012-Dec-14 19:05:01 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:01 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Dec-14 19:05:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:02 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:05:02 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Dec-14 19:05:02 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Dec-14 19:05:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Dec-14 19:05:02 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Dec-14 19:05:02 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Dec-14 19:05:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:05:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:05:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:05:02 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2012-Dec-14 19:05:02 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:05:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:05:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:05:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:05:02 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 19:05:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 19:05:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 19:05:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Dec-14 19:05:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Dec-14 19:05:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:05:03 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Dec-14 19:05:03 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:05:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Dec-14 19:05:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:05:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 19:05:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:05:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:05:03 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 LOG3 sock_errsend: To WAPPDATA: FLUSH 2012-Dec-14 19:05:03 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Dec-14 19:05:03 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Dec-14 19:05:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:05:03 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Dec-14 19:05:03 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2012-Dec-14 19:05:03 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2012-Dec-14 19:05:03 INFO1 config_mock: Starting to configure the Mock spectrometer 2012-Dec-14 19:05:03 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Dec-14 19:05:03 START begin_task: Starting task 'selecting calibration port' 2012-Dec-14 19:05:03 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 LOG3 vw_send: To DATATAKING: calport 3 2012-Dec-14 19:05:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Dec-14 19:05:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:03 START begin_task: Starting task 'waiting on calport' 2012-Dec-14 19:05:03 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Dec-14 19:05:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2012-Dec-14 19:05:04 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Dec-14 19:05:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:04 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:05:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Dec-14 19:05:04 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Dec-14 19:05:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Dec-14 19:05:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Dec-14 19:05:04 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2012-Dec-14 19:05:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:05:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:05:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:05:04 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Dec-14 19:05:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:05:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:05:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:05:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:05:04 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Dec-14 19:05:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Dec-14 19:05:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Dec-14 19:05:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:05:04 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Dec-14 19:05:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:05:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:05:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:05:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:05:04 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Dec-14 19:05:04 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2012-Dec-14 19:05:04 LOG3 socket_wait: To MOCK: NOP 2012-Dec-14 19:05:04 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2012-Dec-14 19:05:04 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Dec-14 19:05:05 ALERT got_mock_message: Mock spectrometer restarting 2012-Dec-14 19:05:05 LOG4 from_mock: From MOCK: nop ok 2012-Dec-14 19:05:05 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2012-Dec-14 19:05:05 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Dec-14 19:05:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:0 k:a rf:1 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:1 k:b rf:5 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:2 k:c rf:2 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:3 k:d rf:6 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:4 k:e rf:3 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:5 k:f rf:7 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: PhilDbg:config_mock b:6 k:g rf:4 flip:-1 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): datatype=AB 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bwmhz=172.032 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): digfreqoffhz=-0.0 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fftlen=8192 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): bits=32 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevif1hz=250000000 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): dumptmsec=1.0 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): blankatod=0 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskadc=12 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskpfb=0 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskacc=13 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): fileprefix=a2048 2012-Dec-14 19:05:05 LOG2 config_mock: Mock spectrometer configuration group g1 (0): emaskash=13 2012-Dec-14 19:05:06 LOG2 config_mock: Mock spectrometer configuration group g1 (0): adcclkhz=172032000 2012-Dec-14 19:05:06 LOG2 config_mock: Mock spectrometer configuration group g1 (0): pdevlohz=175000000 325000000 2012-Dec-14 19:05:06 LOG2 config_mock: Mock spectrometer configuration group g1 (0): maxfilesizemb=2048 2012-Dec-14 19:05:06 LOG2 config_mock: Mock spectrometer configuration group g1 (0): calctl=c0 2012-Dec-14 19:05:06 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group g1' using string 'conf' 2012-Dec-14 19:05:06 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bwmhz=172.032:digfreqoffhz=-0.0:fftlen=8192:bits=32:pdevif1hz=250000000:dumptmsec=1.0:blankatod=0:emaskadc=12:emaskpfb=0:emaskacc=13:fileprefix=a2048:emaskash=13:adcclkhz=172032000:pdevlohz=175000000 325000000:maxfilesizemb=2048:calctl=c0 2012-Dec-14 19:05:06 START begin_task: Starting task 'waiting on configure Mock spectrometer group g1' 2012-Dec-14 19:05:06 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Dec-14 19:05:06 LOG4 from_mock: From MOCK: confok 2012-Dec-14 19:05:06 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group g1' with status 'OK' 2012-Dec-14 19:05:06 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Dec-14 19:05:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group g1' 2012-Dec-14 19:05:06 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group g2' using string 'conf' 2012-Dec-14 19:05:06 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2012-Dec-14 19:05:06 START begin_task: Starting task 'waiting on disable Mock spectrometer group g2' 2012-Dec-14 19:05:06 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2012-Dec-14 19:05:06 LOG4 from_mock: From MOCK: confok 2012-Dec-14 19:05:06 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group g2' with status 'OK' 2012-Dec-14 19:05:06 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2012-Dec-14 19:05:06 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group g2' 2012-Dec-14 19:05:06 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2012-Dec-14 19:05:06 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2012-Dec-14 19:05:06 DONE finish_task: DONE finished configuring: the Mock spectrometer 2012-Dec-14 19:05:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:05:06 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2012-Dec-14 19:05:06 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2012-Dec-14 19:05:06 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Dec-14 19:05:06 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2012-Dec-14 19:05:06 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2012-Dec-14 19:05:06 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Dec-14 19:05:06 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGES33PP_p3_074) < 003845 THEN' 2012-Dec-14 19:05:07 LOG3 is_if_valid: Current source data: rising 228.5 20.3 4 - - 137 1.0 2012-Dec-14 19:05:07 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES33PP_p3_074) < 003845 2012-Dec-14 19:05:07 INFO5 is_if_valid: Condition parsed as: 0.25219466666666668 < 0.64583333333333326 2012-Dec-14 19:05:07 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=217.51 alfaangle=-18.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES33PP_p3_074 ra=12400.00 dec=305030.00' 2012-Dec-14 19:05:07 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Dec-14 19:05:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 19:05:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 217.51 -18.8 hcorcal 5 tracking no off lcorcal first 1 AGES33PP_p3_074 12400.00 305030.00 J 8500.0 Heliocentric velocity(optical)' 2012-Dec-14 19:05:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Dec-14 19:05:08 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2012-Dec-14 19:05:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc2' 2012-Dec-14 19:05:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Dec-14 19:05:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES33PP_p3_074} 2012-Dec-14 19:05:08 INFO3 fixed_driftmap: Sending telescope to Az = 217.51 and ZA = 16.32 2012-Dec-14 19:05:08 LOG3 track_source: Calling 'track_source AGES33PP_p3_074 217.51 16.3172981527 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Dec-14 19:05:08 START begin_task: Starting task 'sending tracking commands' 2012-Dec-14 19:05:08 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2012-Dec-14 19:05:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p3_074} INFO {Slewing to source 'AGES33PP_p3_074' ...} 2012-Dec-14 19:05:08 INFO1 track_source: Starting to track AGES33PP_p3_074 2012-Dec-14 19:05:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p3_074" 2012-Dec-14 19:05:08 LOG3 vw_send: To DATATAKING: set ra 217.51 2012-Dec-14 19:05:08 LOG3 vw_send: To DATATAKING: set dec 16.3172981527 2012-Dec-14 19:05:08 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Dec-14 19:05:08 LOG3 vw_send: To DATATAKING: pnt tr 217.51 16.3172981527 -CF 2012-Dec-14 19:05:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Dec-14 19:05:09 STOP finish_task: Finishing task 'sending tracking commands' 2012-Dec-14 19:05:09 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2012-Dec-14 19:05:09 INFO2 finish_task: DONE finished sending: tracking commands 2012-Dec-14 19:05:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:05:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Dec-14 19:05:09 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2012-Dec-14 19:05:09 START begin_task: Starting task 'rotate ALFA to -18.8 degrees' 2012-Dec-14 19:05:09 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2012-Dec-14 19:05:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -18.8 degrees ...} 2012-Dec-14 19:05:09 INFO2 rotate_alfa: ALFA commanded to -18.8 degrees 2012-Dec-14 19:05:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION -18.8 REPLY 2012-Dec-14 19:05:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Dec-14 19:05:09 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Dec-14 19:05:09 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p3_074" 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: set ra 217.51 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% 217.51 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: set dec 16.3172981527 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: 16.3172981527 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: pnt tr 217.51 16.3172981527 -CF 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Dec-14 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Dec-14 19:05:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Dec-14 19:05:31 INFO3 alfa_motor: ALFA rotator in-position -18.80 degrees 2012-Dec-14 19:05:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Dec-14 19:05:31 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2012-Dec-14 19:05:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:05:31 STOP finish_task: Finishing task 'rotate ALFA to -18.8 degrees' 2012-Dec-14 19:05:31 LOG5 finish_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2012-Dec-14 19:05:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to -18.8 degrees 2012-Dec-14 19:05:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:05:31 STOP end_task: Finishing task 'rotate ALFA to -18.8 degrees' with status 'OK' 2012-Dec-14 19:05:31 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2012-Dec-14 19:05:31 START begin_task: Starting task 'waiting on telescope' 2012-Dec-14 19:05:31 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Dec-14 19:05:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Dec-14 19:05:31 LOG3 waittrk: Start waittrk 5 2012-Dec-14 19:05:31 START begin_task: Starting task 'waiting on telescope movement' 2012-Dec-14 19:05:31 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2012-Dec-14 19:05:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Dec-14 19:05:36 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2012-Dec-14 19:05:36 START begin_task: Starting task 'waiting on telescope on source' 2012-Dec-14 19:05:36 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Dec-14 19:05:56 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:05:56 INFO2 waittrk: Now tracking AGES33PP_p3_074 2012-Dec-14 19:05:56 LOG4 waittrk: Current telescope position: Az = 217.15 ZA = 16.35 2012-Dec-14 19:05:56 STOP finish_task: Finishing task 'waiting on telescope' 2012-Dec-14 19:05:56 LOG5 finish_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Dec-14 19:05:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:05:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Dec-14 19:05:56 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 START begin_task: Starting task 'selecting calibration type' 2012-Dec-14 19:05:56 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Dec-14 19:05:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Dec-14 19:05:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:56 START begin_task: Starting task 'waiting on setcal' 2012-Dec-14 19:05:56 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Dec-14 19:05:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:05:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:56 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:05:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Dec-14 19:05:56 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Dec-14 19:05:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:05:56 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Dec-14 19:05:56 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:05:56 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2012-Dec-14 19:05:56 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:05:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:05:56 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2012-Dec-14 19:05:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:05:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Dec-14 19:05:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:05:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:05:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:05:57 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2012-Dec-14 19:05:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:05:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:05:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:05:57 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2012-Dec-14 19:05:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:05:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:05:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Dec-14 19:05:57 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2012-Dec-14 19:05:57 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Dec-14 19:05:57 INFO2 astwait: Waiting for 1361 seconds from 23:05:57 to 23:28:38 UTC ... 2012-Dec-14 19:05:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1361 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Dec-14 19:05:57 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Dec-14 19:05:57 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2012-Dec-14 19:28:38 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Dec-14 19:28:38 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2012-Dec-14 19:28:38 INFO3 astwait: Finished waiting 2012-Dec-14 19:28:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:28:38 LOG5 dopset_later: Calling 'dopset_later 61.075911199376485' 2012-Dec-14 19:28:38 INFO3 dopset_later: Setting Doppler correction for 19:29:38 (61.1 seconds from now) 2012-Dec-14 19:28:38 LOG5 antvel: Calling 'antvel 217.510000 16.317298 F Heliocentric 61.075911199376485' 2012-Dec-14 19:28:38 LOG2 antvel: Transforming current Az = 217.51 ZA = 16.32 to apparent RA = 01:24:45.3 Dec = +30:54:45.7 2012-Dec-14 19:28:38 LOG2 antvel: Parameters to Doppler: Heliocentric 84578 2012 349 0.0 2012-Dec-14 19:28:38 INFO5 antvel: Computed antenna velocity: +22.37534 km/s 2012-Dec-14 19:28:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=22.375344762299999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Dec-14 19:28:38 INFO4 dopset_gen: New sky frequencies: 1381.140346 1381.140346 1381.140346 1381.140346 1381.140346 1381.140346 1381.140346 1381.140346 1381.140346 2012-Dec-14 19:28:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.140346 sky0=1381.140346 sky1=1381.140346 sky2=1381.140346 sky3=1381.140346 sky4=1381.140346 sky5=1381.140346 sky6=1381.140346 sky7=1381.140346 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:28:38 LOG2 dopset_gen: Result from 'sky2syn': 1631.140346 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631140346.0} 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:28:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Dec-14 19:28:38 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Dec-14 19:28:38 INFO5 fixed_driftmap: Tracking J2000 position: RA = 01:23:03.7 Dec = +30:50:43.0 2012-Dec-14 19:28:38 LOG3 track_source: Calling 'track_source AGES33PP_p3_074 012303.7 305043.0 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Dec-14 19:28:38 START begin_task: Starting task 'sending tracking commands' 2012-Dec-14 19:28:38 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2012-Dec-14 19:28:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p3_074} INFO {Slewing to source 'AGES33PP_p3_074' ...} 2012-Dec-14 19:28:38 INFO1 track_source: Starting to track AGES33PP_p3_074 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p3_074" 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: set ra 012303.7 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: set dec 305043.0 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: pnt tr 012303.7 305043.0 -CJ 2012-Dec-14 19:28:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Dec-14 19:28:38 STOP finish_task: Finishing task 'sending tracking commands' 2012-Dec-14 19:28:38 LOG5 finish_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2012-Dec-14 19:28:38 INFO2 finish_task: DONE finished sending: tracking commands 2012-Dec-14 19:28:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:28:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Dec-14 19:28:39 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2012-Dec-14 19:28:39 START begin_task: Starting task 'waiting on telescope' 2012-Dec-14 19:28:39 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Dec-14 19:28:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Dec-14 19:28:39 LOG3 waittrk: Start waittrk 5 2012-Dec-14 19:28:39 START begin_task: Starting task 'waiting on telescope movement' 2012-Dec-14 19:28:39 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631140346.0} 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p3_074" 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: set ra 012303.7 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: set dec 305043.0 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: pnt tr 012303.7 305043.0 -CJ 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 012303.7 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: vw% 305043.0 2012-Dec-14 19:28:39 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Dec-14 19:28:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Dec-14 19:28:44 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2012-Dec-14 19:28:44 START begin_task: Starting task 'waiting on telescope on source' 2012-Dec-14 19:28:44 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2012-Dec-14 19:28:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Dec-14 19:28:46 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2012-Dec-14 19:28:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:28:46 INFO2 waittrk: Now tracking AGES33PP_p3_074 2012-Dec-14 19:28:46 LOG4 waittrk: Current telescope position: Az = 217.09 ZA = 16.34 2012-Dec-14 19:28:46 STOP finish_task: Finishing task 'waiting on telescope' 2012-Dec-14 19:28:46 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Dec-14 19:28:46 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Dec-14 19:28:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:28:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Dec-14 19:28:46 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Dec-14 19:28:46 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Dec-14 19:28:46 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2012-Dec-14 19:28:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Dec-14 19:28:46 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Dec-14 19:28:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Dec-14 19:28:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Dec-14 19:28:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:28:46 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Dec-14 19:28:46 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Dec-14 19:28:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Dec-14 19:28:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:28:49 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:28:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Dec-14 19:28:49 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Dec-14 19:28:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Dec-14 19:28:49 START begin_task: Starting task 'adjusting WAPP power' 2012-Dec-14 19:28:49 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2012-Dec-14 19:28:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Dec-14 19:28:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:28:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:28:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:28:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:28:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Dec-14 19:28:50 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Dec-14 19:28:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Dec-14 19:28:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:28:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 5 8 dB 2012-Dec-14 19:28:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 6 dB --- beam 3: 6 5 dB 2012-Dec-14 19:28:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 7 dB --- beam 5: 10 6 dB 2012-Dec-14 19:28:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 4 dB --- beam 7: 10 5 dB 2012-Dec-14 19:28:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Dec-14 19:28:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Dec-14 19:28:50 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Dec-14 19:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.063 0.962 ALFA beam 1: 1.020 1.018 2012-Dec-14 19:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.886 0.958 ALFA beam 3: 0.990 0.938 2012-Dec-14 19:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.897 1.095 ALFA beam 5: 0.895 1.072 2012-Dec-14 19:28:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.979 1.005 ALFA beam 7: 1.088 0.953 2012-Dec-14 19:28:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Dec-14 19:28:50 LOG5 finish_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2012-Dec-14 19:28:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Dec-14 19:28:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:28:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Dec-14 19:28:50 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2012-Dec-14 19:28:50 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Dec-14 19:28:50 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2012-Dec-14 19:28:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Dec-14 19:28:50 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power:30' using string 'adjp' 2012-Dec-14 19:28:50 LOG3 socket_wait: To MOCK: ADJP30 2012-Dec-14 19:28:50 START begin_task: Starting task 'waiting on adjust Mock spectrometer power:30' 2012-Dec-14 19:28:50 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b0s0g0 rms:A 32.2 28.3 B 29.6 29.7 mn:A -0.3 -0.4 B -0.8 0.4 gn: 8 10 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.6 28.4 B 29.2 31.0 mn:A 0.3 0.3 B -0.1 -0.4 gn: 9 11 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.9 29.8 B 33.0 28.0 mn:A -0.3 -0.2 B 0.3 0.1 gn: 10 8 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.5 28.1 B 29.6 29.5 mn:A 0.6 -0.1 B -0.3 0.3 gn: 11 7 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 31.0 B 27.7 29.1 mn:A -0.0 -0.4 B 0.1 -0.1 gn: 6 9 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.7 28.9 B 31.1 28.9 mn:A 0.1 -0.2 B -0.4 0.2 gn: 6 10 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.3 B 31.6 28.2 mn:A 0.3 -0.4 B -0.0 -0.2 gn: 9 10 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.8 31.1 B 28.7 29.9 mn:A -0.0 0.2 B 0.2 0.5 gn: 9 10 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.6 29.7 B 31.6 31.7 mn:A -0.4 0.5 B 0.6 0.1 gn: 4 7 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.9 28.9 B 29.7 28.7 mn:A -0.1 -0.3 B -0.3 0.0 gn: 6 8 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 27.8 B 30.5 30.5 mn:A -0.5 -0.1 B 0.4 -0.1 gn: 5 8 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.0 31.8 B 29.7 29.4 mn:A 0.3 -0.4 B -0.0 0.3 gn: 6 8 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.2 29.0 B 31.0 31.9 mn:A -0.1 -0.4 B -0.0 0.4 gn: 5 12 2012-Dec-14 19:28:56 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.2 28.1 B 29.6 29.9 mn:A 0.3 0.1 B -0.1 -0.1 gn: 6 13 2012-Dec-14 19:28:56 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power:30' with status 'OK' 2012-Dec-14 19:28:56 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2012-Dec-14 19:28:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power:30' 2012-Dec-14 19:28:56 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Dec-14 19:28:56 LOG5 finish_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2012-Dec-14 19:28:56 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Dec-14 19:28:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:28:56 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Dec-14 19:28:56 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2012-Dec-14 19:28:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Dec-14 19:28:56 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Dec-14 19:28:56 LOG5 finish_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2012-Dec-14 19:28:56 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Dec-14 19:28:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:28:56 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Dec-14 19:28:57 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2012-Dec-14 19:28:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 19:28:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 19:28:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 19:28:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 19:28:57 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Dec-14 19:28:57 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Dec-14 19:28:57 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Dec-14 19:28:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Dec-14 19:28:57 START begin_task: Starting task 'selecting calibration type' 2012-Dec-14 19:28:57 LOG5 begin_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2012-Dec-14 19:28:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Dec-14 19:28:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Dec-14 19:28:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:28:57 START begin_task: Starting task 'waiting on setcal' 2012-Dec-14 19:28:57 LOG5 begin_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2012-Dec-14 19:28:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 19:28:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Dec-14 19:28:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:28:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:28:57 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:28:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Dec-14 19:28:57 LOG5 end_task: Level: (5) ID = <10146> Status = 0 0 0 0 ok 2012-Dec-14 19:28:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Dec-14 19:28:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:28:57 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Dec-14 19:28:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:28:57 LOG5 begin_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2012-Dec-14 19:28:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:28:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:28:57 LOG5 end_task: Level: (5) ID = <10147> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:28:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Dec-14 19:28:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:28:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:28:58 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:28:58 LOG5 begin_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:28:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20121214.a2048.0001.fits 2012-Dec-14 19:28:58 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:28:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:28:58 LOG5 end_task: Level: (5) ID = <10148> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:28:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:28:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Dec-14 19:28:58 LOG5 end_task: Level: (4) ID = <10145> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Dec-14 19:28:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Dec-14 19:28:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Dec-14 19:28:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:28:58 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20121214.a2048.0001.fits} 2012-Dec-14 19:28:58 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:28:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Dec-14 19:28:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:28:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:28:58 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Dec-14 19:28:58 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Dec-14 19:28:58 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2012-Dec-14 19:28:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Dec-14 19:28:58 LOG5 log_alfabeam: Parameters: 1.3843611111111114 30.845277777777778 0.634395 2012.957732432124 -18.800013 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 0 1.384361111111109 30.845277777777785 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 1 1.384638123435880 30.747124849147458 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 2 1.391131033805423 30.812407805192567 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 3 1.390843871416489 30.910857242659553 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 4 1.384035484367520 30.943608349707247 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 5 1.377583761541631 30.877497959393260 2012-Dec-14 19:28:58 LOG4 log_alfabeam: ALFABEAM 6 1.377899024315145 30.779462945174760 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: projid=a2048 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: obsnm=DPADILLA 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: object=AGES33PP_p3_074 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: frontend=alfa 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: caltype=hcorcal 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: obsmode=CAL 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: scantype=ON 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: patternid=234900015 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: scanid=234900029 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: prfeed=0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: topoafreqhz=1456140346.0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: topobfreqhz=1306140346.0 2012-Dec-14 19:28:59 TEST take_mock_data: PSET configuration: filetype=1 2012-Dec-14 19:28:59 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2012-Dec-14 19:28:59 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=DPADILLA:object=AGES33PP_p3_074:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=234900015:scanid=234900029:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456140346.0:topobfreqhz=1306140346.0:filetype=1 2012-Dec-14 19:28:59 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2012-Dec-14 19:28:59 LOG5 begin_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2012-Dec-14 19:28:59 LOG4 from_mock: From MOCK: psetok 2012-Dec-14 19:28:59 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2012-Dec-14 19:28:59 LOG5 end_task: Level: (5) ID = <10151> Status = 0 0 0 0 ok 2012-Dec-14 19:28:59 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2012-Dec-14 19:28:59 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Dec-14 19:28:59 LOG3 socket_wait: To MOCK: STAR5 2012-Dec-14 19:28:59 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Dec-14 19:28:59 LOG5 begin_task: Level: (5) ID = <10152> Status = 0 0 0 0 ok 2012-Dec-14 19:28:59 LOG4 from_mock: From MOCK: starok 2012-Dec-14 19:28:59 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Dec-14 19:28:59 LOG5 end_task: Level: (5) ID = <10152> Status = 0 0 0 0 ok 2012-Dec-14 19:28:59 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Dec-14 19:28:59 INFO2 take_data: Starting WAPP+Mock 5-second scan: 234900029 2012-Dec-14 19:29:00 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Dec-14 19:29:00 LOG5 begin_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2012-Dec-14 19:29:00 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Dec-14 19:29:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:29:00 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Dec-14 19:29:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Dec-14 19:29:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84541.00 2012-Dec-14 19:29:01 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2012-Dec-14 19:29:01 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Dec-14 19:29:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Dec-14 19:29:01 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:02 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:04 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 19:29:04.02 2012-Dec-14 19:29:04 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1355527744.02 Fri Dec 14 19:29:04 2012 2012-Dec-14 19:29:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.140346 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:29:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (499999967 != 499999966 diff = 1)! 2012-Dec-14 19:29:09 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:29:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Dec-14 19:29:10 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Dec-14 19:29:10 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Dec-14 19:29:10 LOG5 end_task: Level: (5) ID = <10153> Status = 0 0 0 0 ok 2012-Dec-14 19:29:10 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Dec-14 19:29:10 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2012-Dec-14 19:29:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Dec-14 19:29:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:29:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:29:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:29:10 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Dec-14 19:29:10 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:29:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:29:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:29:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:29:10 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Dec-14 19:29:10 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Dec-14 19:29:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Dec-14 19:29:10 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Dec-14 19:29:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Dec-14 19:29:10 LOG5 log_alfabeam: Parameters: 1.3843611111111114 30.845277777777778 0.637737 2012.9577328123812 -18.800013 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 0 1.384361111111109 30.845277777777781 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 1 1.384656040270630 30.747133705716767 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 2 1.391137038917892 30.812613049779987 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 3 1.390831849237493 30.911053870579387 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 4 1.384017408324306 30.943598345401259 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 5 1.377577880900477 30.877291422261013 2012-Dec-14 19:29:10 LOG4 log_alfabeam: ALFABEAM 6 1.377911108443385 30.779266641380030 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: projid=a2048 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: obsnm=DPADILLA 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: object=AGES33PP_p3_074 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: frontend=alfa 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: caltype=hcorcal 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: obsmode=CAL 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: scantype=OFF 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: patternid=234900015 2012-Dec-14 19:29:10 TEST take_mock_data: PSET configuration: scanid=234900030 2012-Dec-14 19:29:11 TEST take_mock_data: PSET configuration: prfeed=0 2012-Dec-14 19:29:11 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Dec-14 19:29:11 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Dec-14 19:29:11 TEST take_mock_data: PSET configuration: topoafreqhz=1456140346.0 2012-Dec-14 19:29:11 TEST take_mock_data: PSET configuration: topobfreqhz=1306140346.0 2012-Dec-14 19:29:11 TEST take_mock_data: PSET configuration: filetype=1 2012-Dec-14 19:29:11 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2012-Dec-14 19:29:11 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=DPADILLA:object=AGES33PP_p3_074:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=234900015:scanid=234900030:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456140346.0:topobfreqhz=1306140346.0:filetype=1 2012-Dec-14 19:29:11 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2012-Dec-14 19:29:11 LOG5 begin_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2012-Dec-14 19:29:11 LOG4 from_mock: From MOCK: psetok 2012-Dec-14 19:29:11 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2012-Dec-14 19:29:11 LOG5 end_task: Level: (5) ID = <10156> Status = 0 0 0 0 ok 2012-Dec-14 19:29:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2012-Dec-14 19:29:11 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Dec-14 19:29:11 LOG3 socket_wait: To MOCK: STAR5 2012-Dec-14 19:29:11 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Dec-14 19:29:11 LOG5 begin_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2012-Dec-14 19:29:11 LOG4 from_mock: From MOCK: starok 2012-Dec-14 19:29:11 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Dec-14 19:29:11 LOG5 end_task: Level: (5) ID = <10157> Status = 0 0 0 0 ok 2012-Dec-14 19:29:11 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Dec-14 19:29:11 INFO2 take_data: Starting WAPP+Mock 5-second scan: 234900030 2012-Dec-14 19:29:12 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Dec-14 19:29:12 LOG5 begin_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2012-Dec-14 19:29:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Dec-14 19:29:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:29:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Dec-14 19:29:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Dec-14 19:29:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84553.00 2012-Dec-14 19:29:13 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Dec-14 19:29:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Dec-14 19:29:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Dec-14 19:29:16 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 19:29:16.02 2012-Dec-14 19:29:16 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1355527756.02 Fri Dec 14 19:29:16 2012 2012-Dec-14 19:29:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.140346 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:29:18 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Dec-14 19:29:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:29:18 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:29:18 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:29:21 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:29:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:29:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Dec-14 19:29:22 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Dec-14 19:29:22 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Dec-14 19:29:22 LOG5 end_task: Level: (5) ID = <10158> Status = 0 0 0 0 ok 2012-Dec-14 19:29:22 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Dec-14 19:29:22 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Dec-14 19:29:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Dec-14 19:29:22 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Dec-14 19:29:22 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Dec-14 19:29:22 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Dec-14 19:29:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:29:22 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Dec-14 19:29:22 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Dec-14 19:29:22 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Dec-14 19:29:22 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 217.51 and ZA = 16.32 2012-Dec-14 19:29:22 LOG3 track_source: Calling 'track_source AGES33PP_p3_074 217.51 16.3172981527 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Dec-14 19:29:22 START begin_task: Starting task 'sending tracking commands' 2012-Dec-14 19:29:22 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2012-Dec-14 19:29:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES33PP_p3_074} INFO {Slewing to source 'AGES33PP_p3_074' ...} 2012-Dec-14 19:29:22 INFO1 track_source: Starting to track AGES33PP_p3_074 2012-Dec-14 19:29:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES33PP_p3_074" 2012-Dec-14 19:29:22 LOG3 vw_send: To DATATAKING: set ra 217.51 2012-Dec-14 19:29:22 LOG3 vw_send: To DATATAKING: set dec 16.3172981527 2012-Dec-14 19:29:22 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Dec-14 19:29:22 LOG3 vw_send: To DATATAKING: pnt tr 217.51 16.3172981527 -CF 2012-Dec-14 19:29:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Dec-14 19:29:22 STOP finish_task: Finishing task 'sending tracking commands' 2012-Dec-14 19:29:22 LOG5 finish_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2012-Dec-14 19:29:22 INFO2 finish_task: DONE finished sending: tracking commands 2012-Dec-14 19:29:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:29:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Dec-14 19:29:22 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2012-Dec-14 19:29:23 LOG1 fixed_driftmap: Parameters: HA = -00:46:00.4 Start = 00:38:45.0 LST = 00:38:27.9 diff = 17.1 secs 2012-Dec-14 19:29:23 INFO2 fixed_driftmap: Waiting 15.1 seconds for RA 1:24:45 2012-Dec-14 19:29:23 INFO2 lstwait: Waiting for 15.1 secs from LST 00:38:28 to LST 00:38:43 ... 2012-Dec-14 19:29:23 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.080241616016805 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Dec-14 19:29:23 START begin_task: Starting task 'waiting on wait on LST' 2012-Dec-14 19:29:23 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES33PP_p3_074" 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: set ra 217.51 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: vw% 217.51 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: set dec 16.3172981527 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: 16.3172981527 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: pnt tr 217.51 16.3172981527 -CF 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Dec-14 19:29:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Dec-14 19:29:38 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Dec-14 19:29:38 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Dec-14 19:29:38 LOG4 lstwait: Finished waiting 0.92 seconds late 2012-Dec-14 19:29:38 INFO3 lstwait: Finished waiting 2012-Dec-14 19:29:38 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:29:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Dec-14 19:29:38 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Dec-14 19:29:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Dec-14 19:29:38 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Dec-14 19:29:38 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Dec-14 19:29:38 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Dec-14 19:29:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Dec-14 19:29:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: projid=a2048 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: obsnm=DPADILLA 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: object=AGES33PP_p3_074 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: frontend=alfa 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: caltype=hcorcal 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: req_vel=8500000.0 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: patternid=234900031 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: scanid=234900031 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: prfeed=0 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Dec-14 19:29:38 TEST take_mock_data: PSET configuration: topoafreqhz=1456140346.0 2012-Dec-14 19:29:39 TEST take_mock_data: PSET configuration: topobfreqhz=1306140346.0 2012-Dec-14 19:29:39 TEST take_mock_data: PSET configuration: filetype=1 2012-Dec-14 19:29:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group g1 parameters' using string 'pset' 2012-Dec-14 19:29:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=DPADILLA:object=AGES33PP_p3_074:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=234900031:scanid=234900031:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456140346.0:topobfreqhz=1306140346.0:filetype=1 2012-Dec-14 19:29:39 START begin_task: Starting task 'waiting on send Mock spectrometer group g1 parameters' 2012-Dec-14 19:29:39 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2012-Dec-14 19:29:39 LOG4 from_mock: From MOCK: psetok 2012-Dec-14 19:29:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group g1 parameters' with status 'OK' 2012-Dec-14 19:29:39 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2012-Dec-14 19:29:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group g1 parameters' 2012-Dec-14 19:29:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Dec-14 19:29:39 LOG3 socket_wait: To MOCK: STAR1200 2012-Dec-14 19:29:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Dec-14 19:29:39 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Dec-14 19:29:39 LOG4 from_mock: From MOCK: starok 2012-Dec-14 19:29:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Dec-14 19:29:39 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Dec-14 19:29:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Dec-14 19:29:39 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 234900031 2012-Dec-14 19:29:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Dec-14 19:29:39 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Dec-14 19:29:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:29:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Dec-14 19:29:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Dec-14 19:29:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Dec-14 19:29:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84580.00 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.140346 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:29:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.140346 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:29:41 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Dec-14 19:29:41 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Dec-14 19:29:41 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-111 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Dec-14 19:29:44 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 19:29:44.02 2012-Dec-14 19:29:44 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1355527784.02 Fri Dec 14 19:29:44 2012 2012-Dec-14 19:29:44 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Dec-14 19:29:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:29:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:29:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:30:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:30:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:30:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:30:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:30:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:30:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:30:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:31:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:31:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:31:05 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:31:05.314 (seconds: 70265.314)!} 2012-Dec-14 19:31:05 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:31:05.314 (seconds: 70265.314)! 2012-Dec-14 19:31:06 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 70264.0 to 70265.0! 2012-Dec-14 19:31:07 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (70264.0 - 70266.0)! 2012-Dec-14 19:31:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:31:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:31:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:31:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:31:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:31:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:31:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:32:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:32:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:32:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:32:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:32:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:32:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:32:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:32:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:32:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:32:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:33:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:33:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:33:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:33:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:33:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:33:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:33:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:33:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:33:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:33:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 1 error 2012-Dec-14 19:33:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:33:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:33:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:33:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:33:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:33:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:33:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:33:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:33:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:33:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:34:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:34:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:34:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:34:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:34:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:34:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:34:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:34:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:34:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:34:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:34:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:34:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:34:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:34:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:34:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:35:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:35:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:35:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:35:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:35:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:35:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:35:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:35:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2012-Dec-14 19:35:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:35:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2012-Dec-14 19:35:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:35:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:35:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:35:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Dec-14 19:35:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2012-Dec-14 19:35:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:35:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:35:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:35:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:35:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:35:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:36:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:36:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:36:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:36:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:36:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 2-3 errors PFB = 16-31 errors 2012-Dec-14 19:36:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 8-15 errors 2012-Dec-14 19:36:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 8-15 errors PFB = 32-63 errors 2012-Dec-14 19:36:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:36:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:36:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2012-Dec-14 19:36:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:36:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:36:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:36:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:37:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 2-3 errors PFB = 32-63 errors 2012-Dec-14 19:37:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:37:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:37:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2012-Dec-14 19:37:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:37:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:37:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:37:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:37:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:37:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:37:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 1 error PFB = 64-127 errors 2012-Dec-14 19:37:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:37:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2012-Dec-14 19:37:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:37:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:37:34 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:37:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:37:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:37:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2012-Dec-14 19:37:46 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:37:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:37:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:37:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2012-Dec-14 19:37:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:37:58 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:38:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:38:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:38:10 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:38:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:38:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2012-Dec-14 19:38:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:38:22 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:38:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:38:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:38:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:38:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:38:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 2-3 errors 2012-Dec-14 19:38:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:38:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:38:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:39:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:39:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:39:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:39:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:39:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:39:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:39:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:39:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:39:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:39:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:39:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:39:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:40:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:40:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:40:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:40:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:40:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:40:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:40:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:40:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:40:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:40:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:40:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:41:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2012-Dec-14 19:41:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Dec-14 19:41:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:41:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2012-Dec-14 19:41:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:41:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:41:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:41:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 1 error PFB = 64-127 errors 2012-Dec-14 19:41:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:41:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 2-3 errors 2012-Dec-14 19:41:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:41:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:41:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:41:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:41:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2012-Dec-14 19:41:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:41:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:41:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:41:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2012-Dec-14 19:41:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:41:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:41:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:41:47 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:41:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:41:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:42:05 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:42:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:42:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:42:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:42:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:42:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:42:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 1 error PFB = 64-127 errors 2012-Dec-14 19:42:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:42:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Dec-14 19:42:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2012-Dec-14 19:42:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:42:29 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 16-31 errors PFB = 32-63 errors 2012-Dec-14 19:42:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:42:41 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:42:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:42:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:42:53 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:43:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:43:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:43:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:43:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:43:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:43:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2012-Dec-14 19:43:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:43:17 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:43:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:43:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:43:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2012-Dec-14 19:43:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:43:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:43:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:43:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:43:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:44:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:44:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2012-Dec-14 19:44:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:44:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:35 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:44:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:44:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2012-Dec-14 19:44:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:44:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:44:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:44:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:44:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 4-7 errors 2012-Dec-14 19:44:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:45:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:45:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:45:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:45:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:45:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 16-31 errors 2012-Dec-14 19:45:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:45:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:45:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:45:23 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:45:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 8-15 errors 2012-Dec-14 19:45:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 64-127 errors 2012-Dec-14 19:45:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:45:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Dec-14 19:45:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:45:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:45:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:45:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:45:59 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:46:11 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:46:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 4-7 errors PFB = 4-7 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 64-127 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 32-63 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:46:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 128-255 errors PFB = 32-63 errors 2012-Dec-14 19:46:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:46:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:46:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:47:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:47:12 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:47:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:47:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2012-Dec-14 19:47:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Dec-14 19:47:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:47:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:47:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Dec-14 19:47:36 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:47:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:47:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:47:48 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:47:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2012-Dec-14 19:47:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Dec-14 19:47:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 2-3 errors PFB = 32-63 errors 2012-Dec-14 19:47:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:47:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 1 error PFB = 64-127 errors 2012-Dec-14 19:47:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:48:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:48:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:48:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:48:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:48:12 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:48:24 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors 2012-Dec-14 19:48:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:48:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 2-3 errors 2012-Dec-14 19:48:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Dec-14 19:48:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.744 < 0.75)! 2012-Dec-14 19:48:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.950 0.970 0.997 2012-Dec-14 19:48:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.744 0.877 0.930 0.882 2012-Dec-14 19:48:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.896 1.125 0.889 1.072 2012-Dec-14 19:48:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 1.000 1.102 0.947 2012-Dec-14 19:48:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.766 and 1.121 2012-Dec-14 19:48:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (3.086 > 2.0)! 2012-Dec-14 19:48:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 0.949 0.970 0.997 2012-Dec-14 19:48:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.720 3.086 0.982 0.943 2012-Dec-14 19:48:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.895 1.121 0.890 1.074 2012-Dec-14 19:48:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 1.002 1.099 0.950 2012-Dec-14 19:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.889 and 2.462 (still bad) 2012-Dec-14 19:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.678 and 1.124 (still bad) 2012-Dec-14 19:48:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Dec-14 19:48:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Dec-14 19:48:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Dec-14 19:48:55 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.820 and 1.123 2012-Dec-14 19:49:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:49:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 2-3 errors 2012-Dec-14 19:49:06 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 8-15 errors 2012-Dec-14 19:49:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Dec-14 19:49:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 16-31 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 16-31 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC = 64-127 errors PFB = 64-127 errors 2012-Dec-14 19:49:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC = 64-127 errors PFB = 32-63 errors 2012-Dec-14 19:49:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:49:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Dec-14 19:49:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 4-7 errors 2012-Dec-14 19:49:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Dec-14 19:49:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 32-63 errors 2012-Dec-14 19:49:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Dec-14 19:49:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Dec-14 19:49:45 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Dec-14 19:49:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Dec-14 19:49:45 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Dec-14 19:49:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Dec-14 19:49:45 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Dec-14 19:49:45 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Dec-14 19:49:45 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2012-Dec-14 19:49:45 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Dec-14 19:49:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:49:45 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Dec-14 19:49:45 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2012-Dec-14 19:49:45 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2012-Dec-14 19:49:45 COMMAND run_command_line: EXECUTING command 44: 'LOAD togs_cima33.conf' 2012-Dec-14 19:49:45 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Dec-14 19:49:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 19:49:45 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Dec-14 19:49:45 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2012-Dec-14 19:49:45 LOG2 CIMA-antvel: Precessing RA = 01:14:00.0 Dec = +28:40:00.0 Epoch = 2012.95777 J 2012-Dec-14 19:49:45 LOG2 CIMA-antvel: Computed apparent RA = 01:14:44.6 Dec = +28:44:19.4 2012-Dec-14 19:49:45 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 85785 2012 349 0.0 2012-Dec-14 19:49:45 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Dec-14 19:49:46 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Dec-14 19:49:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 19:49:47 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Dec-14 19:49:47 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2012-Dec-14 19:49:47 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Dec-14 19:49:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Dec-14 19:49:47 LOG1 config_iflo: Receiver ALFA already selected 2012-Dec-14 19:49:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:49:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:49:47 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:49:47 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2012-Dec-14 19:49:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:49:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:49:48 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2012-Dec-14 19:49:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:49:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:49:48 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2012-Dec-14 19:49:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2012-Dec-14 19:49:48 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Dec-14 19:49:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2012-Dec-14 19:49:48 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2012-Dec-14 19:49:48 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2012-Dec-14 19:49:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Dec-14 19:49:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:49:48 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Dec-14 19:49:48 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2012-Dec-14 19:49:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 19:49:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Dec-14 19:49:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:49:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:49 LOG4 got_cormsg: From DATATAKING: vw% DONE 2012-Dec-14 19:49:49 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Dec-14 19:49:49 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2012-Dec-14 19:49:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Dec-14 19:49:49 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Dec-14 19:49:49 LOG5 finish_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2012-Dec-14 19:49:49 DONE finish_task: DONE finished configuration: IF/LO path 2012-Dec-14 19:49:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:49:49 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Dec-14 19:49:49 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2012-Dec-14 19:49:49 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Dec-14 19:49:49 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2012-Dec-14 19:49:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Dec-14 19:49:49 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Dec-14 19:49:49 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Dec-14 19:49:49 START begin_task: Starting task 'selecting calibration port' 2012-Dec-14 19:49:49 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2012-Dec-14 19:49:49 LOG3 vw_send: To DATATAKING: calport 3 2012-Dec-14 19:49:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Dec-14 19:49:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:49:49 START begin_task: Starting task 'waiting on calport' 2012-Dec-14 19:49:49 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2012-Dec-14 19:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:50 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Dec-14 19:49:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:50 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:49:50 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Dec-14 19:49:50 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2012-Dec-14 19:49:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Dec-14 19:49:50 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Dec-14 19:49:50 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2012-Dec-14 19:49:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:49:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:49:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:49:50 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Dec-14 19:49:50 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:49:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:49:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:49:50 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 19:49:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 19:49:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 19:49:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 19:49:51 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Dec-14 19:49:51 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Dec-14 19:49:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:49:51 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2012-Dec-14 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Dec-14 19:49:51 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Dec-14 19:49:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 19:49:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:49:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:49:51 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2012-Dec-14 19:49:51 LOG3 sock_errsend: To WAPPDATA: FLUSH 2012-Dec-14 19:49:51 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Dec-14 19:49:51 LOG5 finish_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2012-Dec-14 19:49:51 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Dec-14 19:49:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:49:51 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Dec-14 19:49:51 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2012-Dec-14 19:49:51 COMMAND run_command_line: EXECUTING command 45: 'TRACKCURPOS' 2012-Dec-14 19:49:51 BEGIN begin_task: Starting task 'tracking current position' 2012-Dec-14 19:49:51 LOG5 begin_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2012-Dec-14 19:49:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2012-Dec-14 19:49:51 INFO1 track_current_pos: Starting to track the current commanded position RA = 01:44:15.1 and Dec = +30:50:41.2 2012-Dec-14 19:49:51 LOG3 track_source: Calling 'track_source Cur-pos 014415.1 305041.2 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2012-Dec-14 19:49:51 START begin_task: Starting task 'sending tracking commands' 2012-Dec-14 19:49:51 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2012-Dec-14 19:49:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2012-Dec-14 19:49:51 INFO1 track_source: Starting to track Cur-pos 2012-Dec-14 19:49:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2012-Dec-14 19:49:52 LOG3 vw_send: To DATATAKING: set ra 014415.1 2012-Dec-14 19:49:52 LOG3 vw_send: To DATATAKING: set dec 305041.2 2012-Dec-14 19:49:52 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Dec-14 19:49:52 LOG3 vw_send: To DATATAKING: pnt tr 014415.1 305041.2 -CJ 2012-Dec-14 19:49:52 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2012-Dec-14 19:49:52 STOP finish_task: Finishing task 'sending tracking commands' 2012-Dec-14 19:49:52 LOG5 finish_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2012-Dec-14 19:49:52 INFO2 finish_task: DONE finished sending: tracking commands 2012-Dec-14 19:49:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:49:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Dec-14 19:49:52 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2012-Dec-14 19:49:52 START begin_task: Starting task 'waiting on telescope' 2012-Dec-14 19:49:52 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2012-Dec-14 19:49:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Dec-14 19:49:52 LOG3 waittrk: Start waittrk 5 2012-Dec-14 19:49:52 START begin_task: Starting task 'waiting on telescope movement' 2012-Dec-14 19:49:52 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Dec-14 19:49:52 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: set ra 014415.1 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: vw% 014415.1 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: set dec 305041.2 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: 305041.2 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: pnt tr 014415.1 305041.2 -CJ 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2012-Dec-14 19:49:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Dec-14 19:49:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Dec-14 19:49:57 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Dec-14 19:49:57 START begin_task: Starting task 'waiting on telescope on source' 2012-Dec-14 19:49:57 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Dec-14 19:50:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Dec-14 19:50:01 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Dec-14 19:50:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:50:01 INFO2 waittrk: Now tracking Cur-pos 2012-Dec-14 19:50:01 LOG4 waittrk: Current telescope position: Az = 217.04 ZA = 16.32 2012-Dec-14 19:50:01 STOP finish_task: Finishing task 'waiting on telescope' 2012-Dec-14 19:50:01 LOG5 finish_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2012-Dec-14 19:50:01 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Dec-14 19:50:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:50:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Dec-14 19:50:02 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2012-Dec-14 19:50:02 STOP finish_task: Finishing task 'tracking current position' 2012-Dec-14 19:50:02 LOG5 finish_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2012-Dec-14 19:50:02 DONE finish_task: DONE finished tracking: current position 2012-Dec-14 19:50:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:50:02 END end_task: Finishing task 'tracking current position' with status 'OK' 2012-Dec-14 19:50:02 LOG5 end_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2012-Dec-14 19:50:02 COMMAND run_command_line: EXECUTING command 46: 'ALFAANGLE 19' 2012-Dec-14 19:50:02 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2012-Dec-14 19:50:02 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2012-Dec-14 19:50:02 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2012-Dec-14 19:50:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2012-Dec-14 19:50:02 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2012-Dec-14 19:50:02 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2012-Dec-14 19:50:02 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Dec-14 19:50:02 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Dec-14 19:50:02 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2012-Dec-14 19:50:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Dec-14 19:50:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2012-Dec-14 19:50:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Dec-14 19:50:24 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2012-Dec-14 19:50:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Dec-14 19:50:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2012-Dec-14 19:50:24 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2012-Dec-14 19:50:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2012-Dec-14 19:50:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:50:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2012-Dec-14 19:50:24 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2012-Dec-14 19:50:24 COMMAND run_command_line: EXECUTING command 50: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Dec-14 19:50:24 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2012-Dec-14 19:50:24 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Dec-14 19:50:24 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Dec-14 19:50:24 BEGIN begin_task: Starting task 'smart frequency switching' 2012-Dec-14 19:50:24 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2012-Dec-14 19:50:24 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2012-Dec-14 19:50:24 INFO1 smartfreq: Starting pattern: Smart frequency switching 2012-Dec-14 19:50:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2012-Dec-14 19:50:24 START begin_task: Starting task 'selecting calibration type' 2012-Dec-14 19:50:24 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2012-Dec-14 19:50:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Dec-14 19:50:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Dec-14 19:50:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:50:25 START begin_task: Starting task 'waiting on setcal' 2012-Dec-14 19:50:25 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Dec-14 19:50:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:50:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:25 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:50:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Dec-14 19:50:25 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Dec-14 19:50:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:50:25 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Dec-14 19:50:25 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:50:25 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:25 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:50:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:50:25 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:50:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Dec-14 19:50:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Dec-14 19:50:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:50:25 START begin_task: Starting task 'waiting on command to ALFA' 2012-Dec-14 19:50:25 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG4 got_alfamon: From ALFAMON: ACK 2012-Dec-14 19:50:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Dec-14 19:50:25 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Dec-14 19:50:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Dec-14 19:50:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Dec-14 19:50:25 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2012-Dec-14 19:50:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 DPADILLA 2012-Dec-14 19:50:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 DPADILLA 2012-Dec-14 19:50:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 DPADILLA 2012-Dec-14 19:50:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 DPADILLA 2012-Dec-14 19:50:26 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2012-Dec-14 19:50:26 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Dec-14 19:50:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Dec-14 19:50:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:50:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:50:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:50:26 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2012-Dec-14 19:50:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 DPADILLA' 2012-Dec-14 19:50:26 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:50:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:50:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:50:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:50:26 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2012-Dec-14 19:50:26 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Dec-14 19:50:26 START begin_task: Starting task 'adjusting WAPP power' 2012-Dec-14 19:50:26 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Dec-14 19:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Dec-14 19:50:26 INFO2 adjust_power: Starting to adjust WAPP power 2012-Dec-14 19:50:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Dec-14 19:50:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Dec-14 19:50:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:50:26 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Dec-14 19:50:26 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2012-Dec-14 19:50:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Dec-14 19:50:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Dec-14 19:50:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20121214.a2048.0002.fits 2012-Dec-14 19:50:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20121214.a2048.0002.fits} 2012-Dec-14 19:50:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:29 LOG4 got_cormsg: From DATATAKING: DONE 2012-Dec-14 19:50:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Dec-14 19:50:29 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2012-Dec-14 19:50:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Dec-14 19:50:29 START begin_task: Starting task 'adjusting WAPP power' 2012-Dec-14 19:50:29 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2012-Dec-14 19:50:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Dec-14 19:50:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:50:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:50:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:50:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Dec-14 19:50:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Dec-14 19:50:29 LOG5 begin_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2012-Dec-14 19:50:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Dec-14 19:50:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 6 dB --- beam 1: 5 8 dB 2012-Dec-14 19:50:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 11 6 dB --- beam 3: 6 5 dB 2012-Dec-14 19:50:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 9 8 dB --- beam 5: 10 6 dB 2012-Dec-14 19:50:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 4 dB --- beam 7: 10 5 dB 2012-Dec-14 19:50:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Dec-14 19:50:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Dec-14 19:50:30 LOG5 end_task: Level: (5) ID = <10189> Status = 0 0 0 0 ok 2012-Dec-14 19:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.036 0.972 ALFA beam 1: 1.013 1.071 2012-Dec-14 19:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.901 1.001 ALFA beam 3: 0.986 0.946 2012-Dec-14 19:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.921 0.881 ALFA beam 5: 0.902 1.082 2012-Dec-14 19:50:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.954 0.960 ALFA beam 7: 1.061 0.906 2012-Dec-14 19:50:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Dec-14 19:50:30 LOG5 finish_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2012-Dec-14 19:50:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Dec-14 19:50:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:50:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Dec-14 19:50:30 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2012-Dec-14 19:50:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Dec-14 19:50:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Dec-14 19:50:30 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Dec-14 19:50:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Dec-14 19:50:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Dec-14 19:50:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Dec-14 19:50:30 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Dec-14 19:50:30 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Dec-14 19:50:30 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:50:30 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:50:30 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:50:30 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95777 J 2012-Dec-14 19:50:30 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:50:30 LOG2 antvel: Parameters to Doppler: Topocentric 85830 2012 349 0.0 2012-Dec-14 19:50:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:50:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:50:31 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:50:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:50:31 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:50:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:50:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:50:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Dec-14 19:50:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:50:31 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2012-Dec-14 19:50:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:50:31 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 0.994545 2012.9577734048216 18.999933 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777776 30.844777777777789 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 1 1.733108973031461 30.755197328682591 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 2 1.740702446783815 30.761190619774876 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 3 1.745153128565715 30.850525245253543 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 4 1.741941210139802 30.934457166692617 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 5 1.734303478693043 30.928253709670990 2012-Dec-14 19:50:31 LOG4 log_alfabeam: ALFABEAM 6 1.729922111399683 30.838330726099784 2012-Dec-14 19:50:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900032 2012-Dec-14 19:50:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:50:31 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Dec-14 19:50:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:50:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:50:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:50:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:50:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85832.00 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:50:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:50:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:50:42 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Dec-14 19:50:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:50:42 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2012-Dec-14 19:50:42 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Dec-14 19:50:42 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:50:42 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:50:42 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:50:42 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95777 J 2012-Dec-14 19:50:42 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:50:42 LOG2 antvel: Parameters to Doppler: Topocentric 85842 2012 349 0.0 2012-Dec-14 19:50:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:50:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:50:42 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:50:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:50:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:50:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:50:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:50:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Dec-14 19:50:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:50:43 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2012-Dec-14 19:50:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:50:43 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 0.997887 2012.9577737850786 18.999933 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777771 30.844777777777797 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 1 1.733125478947091 30.755062564113238 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 2 1.740717798284830 30.761287860262062 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 3 1.745152073840521 30.850757874603804 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 4 1.741924635740690 30.934592013575287 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 5 1.734288041976444 30.928154773876120 2012-Dec-14 19:50:43 LOG4 log_alfabeam: ALFABEAM 6 1.729923348611763 30.838097581372207 2012-Dec-14 19:50:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900033 2012-Dec-14 19:50:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:50:43 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2012-Dec-14 19:50:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:50:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:50:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:50:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85844.00 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:50:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:50:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:50:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:50:54 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2012-Dec-14 19:50:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:50:54 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2012-Dec-14 19:50:54 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Dec-14 19:50:54 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:50:54 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:50:54 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:50:54 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95777 J 2012-Dec-14 19:50:54 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:50:54 LOG2 antvel: Parameters to Doppler: Topocentric 85853 2012 349 0.0 2012-Dec-14 19:50:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:50:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:50:54 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:50:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:50:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:50:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:50:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:50:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Dec-14 19:50:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:50:54 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Dec-14 19:50:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:50:55 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.000951 2012.9577741336477 18.999933 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777774 30.844777777777782 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 1 1.733140680695548 30.754939071226513 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 2 1.740731900795592 30.761377702177203 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 3 1.745151066030165 30.850971788223177 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 4 1.741909370889289 30.934715579089122 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 5 1.734273861662671 30.928063368717094 2012-Dec-14 19:50:55 LOG4 log_alfabeam: ALFABEAM 6 1.729924524422930 30.837883202078014 2012-Dec-14 19:50:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900034 2012-Dec-14 19:50:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:50:55 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Dec-14 19:50:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:50:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:50:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:50:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:50:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:50:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85856.00 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:50:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:51:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:51:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:51:06 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Dec-14 19:51:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:51:06 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Dec-14 19:51:06 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Dec-14 19:51:06 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:51:06 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:51:06 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:51:06 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95777 J 2012-Dec-14 19:51:06 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:51:06 LOG2 antvel: Parameters to Doppler: Topocentric 85866 2012 349 0.0 2012-Dec-14 19:51:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:51:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:51:06 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:51:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:51:06 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:51:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:51:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Dec-14 19:51:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:51:07 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Dec-14 19:51:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:51:07 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.004572 2012.9577745455929 18.999933 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777774 30.844777777777797 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 1 1.733158731178729 30.754793209475757 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 2 1.740748601377804 30.761484732854679 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 3 1.745149824209949 30.851225372701848 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 4 1.741891245441465 30.934861523128372 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 5 1.734257069541764 30.927954479540848 2012-Dec-14 19:51:07 LOG4 log_alfabeam: ALFABEAM 6 1.729925965639823 30.837629075807815 2012-Dec-14 19:51:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900035 2012-Dec-14 19:51:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:51:07 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Dec-14 19:51:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:51:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:51:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:51:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85868.00 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:51:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:51:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:51:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:51:18 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Dec-14 19:51:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:51:18 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Dec-14 19:51:18 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Dec-14 19:51:18 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:51:18 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:51:18 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:51:18 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95777 J 2012-Dec-14 19:51:18 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:51:18 LOG2 antvel: Parameters to Doppler: Topocentric 85877 2012 349 0.0 2012-Dec-14 19:51:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:51:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:51:18 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:51:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:51:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:51:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:51:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Dec-14 19:51:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:51:18 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2012-Dec-14 19:51:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:51:18 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.007636 2012.9577748941617 18.999933 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777778 30.844777777777779 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 1 1.733174077425686 30.754669857299504 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 2 1.740762761981822 30.761576028673716 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 3 1.745148730046330 30.851440613112516 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 4 1.741875835430716 30.934984941905000 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 5 1.734242831832226 30.927861601712802 2012-Dec-14 19:51:19 LOG4 log_alfabeam: ALFABEAM 6 1.729927229251201 30.837413384264181 2012-Dec-14 19:51:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900036 2012-Dec-14 19:51:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:51:19 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2012-Dec-14 19:51:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:51:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:51:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:51:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85880.00 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:51:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:51:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:51:30 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2012-Dec-14 19:51:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:51:30 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2012-Dec-14 19:51:30 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Dec-14 19:51:30 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:51:30 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:51:30 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:51:30 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:51:30 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:51:30 LOG2 antvel: Parameters to Doppler: Topocentric 85890 2012 349 0.0 2012-Dec-14 19:51:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:51:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:51:30 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:51:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:51:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:51:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:51:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Dec-14 19:51:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:51:31 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2012-Dec-14 19:51:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:51:31 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.011257 2012.9577753061069 18.999933 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777773 30.844777777777797 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 1 1.733192299298610 30.754524171859629 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 2 1.740779530925596 30.761684788140673 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 3 1.745147385249981 30.851695766239576 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 4 1.741857537811443 30.935130702429735 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 5 1.734225972191077 30.927750961517855 2012-Dec-14 19:51:31 LOG4 log_alfabeam: ALFABEAM 6 1.729928775153025 30.837157706758518 2012-Dec-14 19:51:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900037 2012-Dec-14 19:51:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:51:31 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Dec-14 19:51:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:51:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:51:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:51:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85892.00 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:51:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:51:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:51:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:51:42 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Dec-14 19:51:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:51:42 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2012-Dec-14 19:51:42 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Dec-14 19:51:42 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:51:42 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:51:42 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:51:42 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:51:42 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:51:42 LOG2 antvel: Parameters to Doppler: Topocentric 85902 2012 349 0.0 2012-Dec-14 19:51:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:51:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:51:42 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:51:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:51:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:51:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:51:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Dec-14 19:51:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:51:42 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2012-Dec-14 19:51:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:51:43 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.014600 2012.9577756863639 18.999933 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777773 30.844777777777797 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 1 1.733209205067208 30.754389763506943 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 2 1.740795045097994 30.761786036729301 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 3 1.745146093502857 30.851932084876303 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 4 1.741840561735522 30.935265176579168 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 5 1.734210374701664 30.927647965866171 2012-Dec-14 19:51:43 LOG4 log_alfabeam: ALFABEAM 6 1.729930253386605 30.836920912542556 2012-Dec-14 19:51:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900038 2012-Dec-14 19:51:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:51:43 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2012-Dec-14 19:51:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:51:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:51:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:51:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85904.00 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:51:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:51:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:51:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:51:54 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2012-Dec-14 19:51:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:51:54 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2012-Dec-14 19:51:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Dec-14 19:51:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Dec-14 19:51:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Dec-14 19:51:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:51:54 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Dec-14 19:51:54 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:51:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Dec-14 19:51:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:51:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:51:54 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Dec-14 19:51:54 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Dec-14 19:51:54 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:51:54 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:51:54 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:51:54 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:51:54 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:51:54 LOG2 antvel: Parameters to Doppler: Topocentric 85914 2012 349 0.0 2012-Dec-14 19:51:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:51:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:51:54 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:51:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:51:54 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:51:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:51:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Dec-14 19:51:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:51:55 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Dec-14 19:51:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:51:55 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.017942 2012.9577760666209 18.999933 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777770 30.844777777777789 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 1 1.733226185595075 30.754255488713220 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 2 1.740810585817183 30.761888065282321 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 3 1.745144753526116 30.852169057299449 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 4 1.741823510559921 30.935399513729475 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 5 1.734194751098964 30.927544180455335 2012-Dec-14 19:51:55 LOG4 log_alfabeam: ALFABEAM 6 1.729931780580848 30.836683472988042 2012-Dec-14 19:51:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900039 2012-Dec-14 19:51:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:51:55 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Dec-14 19:51:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:51:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:51:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:51:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:51:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:51:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85916.00 2012-Dec-14 19:51:57 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (56275.994375 - 56275.994398)! 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:52:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:52:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:52:06 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Dec-14 19:52:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:52:06 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Dec-14 19:52:06 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Dec-14 19:52:06 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:52:06 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:52:06 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:52:06 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:52:06 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:52:06 LOG2 antvel: Parameters to Doppler: Topocentric 85926 2012 349 0.0 2012-Dec-14 19:52:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:52:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:52:06 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:52:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:52:06 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:52:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:52:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Dec-14 19:52:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:52:06 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Dec-14 19:52:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:52:07 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.021284 2012.9577764468781 18.999933 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777778 30.844777777777797 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 1 1.733243246209361 30.754121312075029 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 2 1.740826157570744 30.761990908884041 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 3 1.745143364505531 30.852406754239475 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 4 1.741806378936315 30.935533749266121 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 5 1.734179096878537 30.927439569657942 2012-Dec-14 19:52:07 LOG4 log_alfabeam: ALFABEAM 6 1.729933357604805 30.836445317328689 2012-Dec-14 19:52:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900040 2012-Dec-14 19:52:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:52:07 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2012-Dec-14 19:52:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:52:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:52:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:52:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85928.00 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:52:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:52:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:52:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:52:18 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2012-Dec-14 19:52:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:52:18 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Dec-14 19:52:18 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Dec-14 19:52:18 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:52:18 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:52:18 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:52:18 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:52:18 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:52:18 LOG2 antvel: Parameters to Doppler: Topocentric 85937 2012 349 0.0 2012-Dec-14 19:52:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:52:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:52:18 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:52:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:52:18 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:52:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:52:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Dec-14 19:52:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:52:18 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2012-Dec-14 19:52:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:52:18 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.024348 2012.957776795447 18.999933 2012-Dec-14 19:52:18 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777782 30.844777777777779 2012-Dec-14 19:52:18 LOG4 log_alfabeam: ALFABEAM 1 1.733258958268398 30.753998387157367 2012-Dec-14 19:52:18 LOG4 log_alfabeam: ALFABEAM 2 1.740840461147095 30.762085917951914 2012-Dec-14 19:52:18 LOG4 log_alfabeam: ALFABEAM 3 1.745142047561154 30.852625315372588 2012-Dec-14 19:52:18 LOG4 log_alfabeam: ALFABEAM 4 1.741790601456878 30.935656725111343 2012-Dec-14 19:52:19 LOG4 log_alfabeam: ALFABEAM 5 1.734164718068324 30.927342931294287 2012-Dec-14 19:52:19 LOG4 log_alfabeam: ALFABEAM 6 1.729934847603458 30.836226343118010 2012-Dec-14 19:52:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900041 2012-Dec-14 19:52:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:52:19 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Dec-14 19:52:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:52:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:52:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:52:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85940.00 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:52:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:52:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:52:30 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Dec-14 19:52:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:52:30 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2012-Dec-14 19:52:30 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Dec-14 19:52:30 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:52:30 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:52:30 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:52:30 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:52:30 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:52:30 LOG2 antvel: Parameters to Doppler: Topocentric 85950 2012 349 0.0 2012-Dec-14 19:52:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:52:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:52:30 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:52:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:52:30 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:52:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:52:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Dec-14 19:52:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:52:31 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2012-Dec-14 19:52:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:52:31 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.027969 2012.9577772073922 18.999933 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777774 30.844777777777782 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 1 1.733277613981773 30.753853232737157 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 2 1.740857398249454 30.762199092341142 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 3 1.745140437128003 30.852884393697003 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 4 1.741771868038202 30.935801935887568 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 5 1.734147692524535 30.927227820174668 2012-Dec-14 19:52:31 LOG4 log_alfabeam: ALFABEAM 6 1.729936663399677 30.835966785970975 2012-Dec-14 19:52:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900042 2012-Dec-14 19:52:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:52:31 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Dec-14 19:52:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:52:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:52:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:52:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85952.00 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:52:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:52:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:52:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:52:42 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Dec-14 19:52:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:52:42 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2012-Dec-14 19:52:42 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Dec-14 19:52:42 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:52:42 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:52:42 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:52:42 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:52:42 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:52:42 LOG2 antvel: Parameters to Doppler: Topocentric 85961 2012 349 0.0 2012-Dec-14 19:52:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:52:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:52:42 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:52:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:52:42 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:52:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:52:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Dec-14 19:52:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:52:42 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2012-Dec-14 19:52:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:52:42 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.031033 2012.9577775559612 18.999933 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777774 30.844777777777779 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 1 1.733293474169421 30.753730509986234 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 2 1.740871758038333 30.762295618379380 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 3 1.745139028261505 30.853104283821008 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 4 1.741755941766272 30.935924703050226 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 5 1.734133258303120 30.927129645788195 2012-Dec-14 19:52:43 LOG4 log_alfabeam: ALFABEAM 6 1.729938246757146 30.835746498686575 2012-Dec-14 19:52:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900043 2012-Dec-14 19:52:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:52:43 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2012-Dec-14 19:52:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:52:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:52:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:52:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85964.00 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:52:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:52:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:52:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:52:54 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2012-Dec-14 19:52:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:52:54 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2012-Dec-14 19:52:54 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Dec-14 19:52:54 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:52:54 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:52:54 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:52:54 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:52:54 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:52:54 LOG2 antvel: Parameters to Doppler: Topocentric 85974 2012 349 0.0 2012-Dec-14 19:52:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:52:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:52:54 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:52:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:52:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:52:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:52:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Dec-14 19:52:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:52:55 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2012-Dec-14 19:52:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:52:55 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.034654 2012.9577779679062 18.999933 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777774 30.844777777777797 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 1 1.733312305537443 30.753585605342426 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 2 1.740888761219815 30.762410596232407 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 3 1.745137308235339 30.853364932697858 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 4 1.741737031908180 30.936069656265317 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 5 1.734116167645410 30.927012708646334 2012-Dec-14 19:52:55 LOG4 log_alfabeam: ALFABEAM 6 1.729940173841755 30.835485390036123 2012-Dec-14 19:52:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900044 2012-Dec-14 19:52:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:52:55 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2012-Dec-14 19:52:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:52:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:52:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:52:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:52:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:52:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85976.00 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:52:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:53:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:53:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:53:06 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2012-Dec-14 19:53:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:53:06 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2012-Dec-14 19:53:06 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Dec-14 19:53:06 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:53:06 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:53:06 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:53:06 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:53:06 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:53:06 LOG2 antvel: Parameters to Doppler: Topocentric 85986 2012 349 0.0 2012-Dec-14 19:53:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:53:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:53:06 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:53:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:53:06 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:53:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:53:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Dec-14 19:53:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:53:06 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2012-Dec-14 19:53:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:53:06 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.037997 2012.9577783481634 18.999933 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777776 30.844777777777789 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 1 1.733329776039344 30.753451953781589 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 2 1.740904490504791 30.762517621801940 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 3 1.745135666858757 30.853606325551546 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 4 1.741719488564736 30.936203348863131 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 5 1.734100358077665 30.926903863333678 2012-Dec-14 19:53:07 LOG4 log_alfabeam: ALFABEAM 6 1.729942007193271 30.835243582042619 2012-Dec-14 19:53:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900045 2012-Dec-14 19:53:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:53:07 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2012-Dec-14 19:53:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:53:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:53:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:53:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85988.00 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:53:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:53:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:53:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:53:18 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2012-Dec-14 19:53:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:53:18 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2012-Dec-14 19:53:18 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2012-Dec-14 19:53:18 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2012-Dec-14 19:53:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Dec-14 19:53:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:53:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:53:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:53:18 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2012-Dec-14 19:53:18 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:53:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:53:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:53:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:53:18 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2012-Dec-14 19:53:19 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Dec-14 19:53:19 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Dec-14 19:53:19 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:53:19 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:53:19 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:53:19 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:53:19 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:53:19 LOG2 antvel: Parameters to Doppler: Topocentric 85998 2012 349 0.0 2012-Dec-14 19:53:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:53:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:53:19 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:53:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:53:19 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:53:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:53:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Dec-14 19:53:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:53:19 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2012-Dec-14 19:53:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:53:19 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.041339 2012.9577787284204 18.999933 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777774 30.844777777777782 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 1 1.733347323068408 30.753318470445898 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 2 1.740920245147431 30.762625460221997 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 3 1.745133974262291 30.853848370714534 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 4 1.741701868353643 30.936336869531303 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 5 1.734084523643318 30.926794195258175 2012-Dec-14 19:53:19 LOG4 log_alfabeam: ALFABEAM 6 1.729943892486272 30.835001130937108 2012-Dec-14 19:53:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900046 2012-Dec-14 19:53:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:53:20 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2012-Dec-14 19:53:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:53:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:53:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Dec-14 19:53:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86001.00 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:53:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:53:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:53:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:53:31 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2012-Dec-14 19:53:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:53:31 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2012-Dec-14 19:53:31 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Dec-14 19:53:31 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:53:31 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:53:31 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:53:31 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:53:31 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:53:31 LOG2 antvel: Parameters to Doppler: Topocentric 86011 2012 349 0.0 2012-Dec-14 19:53:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:53:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:53:31 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:53:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:53:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:53:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:53:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Dec-14 19:53:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:53:32 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2012-Dec-14 19:53:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:53:32 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.044960 2012.9577791403656 18.999933 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777776 30.844777777777772 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 1 1.733366427548751 30.753173994303207 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 2 1.740937348755438 30.762743260544998 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 3 1.745132081481688 30.854111439945108 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 4 1.741682684173002 30.936481381910266 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 5 1.734067334119515 30.926674400714351 2012-Dec-14 19:53:32 LOG4 log_alfabeam: ALFABEAM 6 1.729945994927720 30.834737632244508 2012-Dec-14 19:53:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900047 2012-Dec-14 19:53:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:53:32 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2012-Dec-14 19:53:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:53:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:53:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Dec-14 19:53:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86013.00 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:53:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:53:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:53:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:53:43 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2012-Dec-14 19:53:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:53:43 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2012-Dec-14 19:53:43 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Dec-14 19:53:43 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:53:43 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:53:43 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:53:43 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:53:43 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:53:43 LOG2 antvel: Parameters to Doppler: Topocentric 86023 2012 349 0.0 2012-Dec-14 19:53:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:53:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:53:43 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:53:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:53:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:53:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:53:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Dec-14 19:53:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:53:43 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2012-Dec-14 19:53:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:53:44 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.048303 2012.9577795206226 18.999933 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777777 30.844777777777779 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 1 1.733384151058899 30.753040755088705 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 2 1.740953170187021 30.762852907872656 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 3 1.745130279163973 30.854355066714650 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 4 1.741664886704064 30.936614650646625 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 5 1.734051433873579 30.926562901339381 2012-Dec-14 19:53:44 LOG4 log_alfabeam: ALFABEAM 6 1.729947991618174 30.834493618680799 2012-Dec-14 19:53:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900048 2012-Dec-14 19:53:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:53:44 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Dec-14 19:53:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:53:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:53:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Dec-14 19:53:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86025.00 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:53:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:53:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:53:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:53:55 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Dec-14 19:53:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:53:55 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2012-Dec-14 19:53:55 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Dec-14 19:53:55 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:53:55 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:53:55 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:53:55 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:53:55 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:53:55 LOG2 antvel: Parameters to Doppler: Topocentric 86035 2012 349 0.0 2012-Dec-14 19:53:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:53:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:53:55 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:53:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:53:55 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:53:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:53:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Dec-14 19:53:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:53:56 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2012-Dec-14 19:53:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:53:56 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.051645 2012.9577799008796 18.999933 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777778 30.844777777777772 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 1 1.733401951842844 30.752907700224320 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 2 1.740969016388440 30.762963382621333 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 3 1.745128424276226 30.854599344370190 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 4 1.741647011621327 30.936747731209046 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 5 1.734035509375375 30.926450564591221 2012-Dec-14 19:53:56 LOG4 log_alfabeam: ALFABEAM 6 1.729950041594633 30.834248963768552 2012-Dec-14 19:53:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900049 2012-Dec-14 19:53:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:53:56 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2012-Dec-14 19:53:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:53:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:53:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:53:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Dec-14 19:53:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86037.00 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:53:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:54:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:54:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:54:07 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2012-Dec-14 19:54:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:54:07 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2012-Dec-14 19:54:07 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Dec-14 19:54:07 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:54:07 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:54:07 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:54:07 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:54:07 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:54:07 LOG2 antvel: Parameters to Doppler: Topocentric 86046 2012 349 0.0 2012-Dec-14 19:54:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:54:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:54:07 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:54:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:54:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:54:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:54:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Dec-14 19:54:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:54:07 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2012-Dec-14 19:54:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:54:07 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.054709 2012.9577802494487 18.999933 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777775 30.844777777777782 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 1 1.733418344662210 30.752785844904615 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 2 1.740983570200703 30.763065427680250 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 3 1.745126676634632 30.854823937664900 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 4 1.741630550365617 30.936869606703286 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 5 1.734020884220931 30.926346803178447 2012-Dec-14 19:54:08 LOG4 log_alfabeam: ALFABEAM 6 1.729951968775303 30.834024032974028 2012-Dec-14 19:54:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900050 2012-Dec-14 19:54:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:54:08 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2012-Dec-14 19:54:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:54:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:54:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Dec-14 19:54:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86049.00 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:54:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:54:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:54:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:54:19 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2012-Dec-14 19:54:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:54:19 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2012-Dec-14 19:54:19 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Dec-14 19:54:19 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:54:19 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:54:19 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:54:19 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:54:19 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:54:19 LOG2 antvel: Parameters to Doppler: Topocentric 86059 2012 349 0.0 2012-Dec-14 19:54:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:54:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:54:19 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:54:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:54:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:54:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:54:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Dec-14 19:54:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:54:20 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Dec-14 19:54:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:54:20 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.058330 2012.9577806613938 18.999933 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777776 30.844777777777779 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 1 1.733437807534706 30.752642005815229 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 2 1.741000801282589 30.763186966059653 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 3 1.745124552768245 30.855090142816476 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 4 1.741611006223816 30.937013465415266 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 5 1.734003569381966 30.926223225018692 2012-Dec-14 19:54:20 LOG4 log_alfabeam: ALFABEAM 6 1.729954305653707 30.833757439422548 2012-Dec-14 19:54:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900051 2012-Dec-14 19:54:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:54:20 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2012-Dec-14 19:54:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:54:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:54:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Dec-14 19:54:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86061.00 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:54:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:54:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:54:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:54:31 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2012-Dec-14 19:54:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:54:31 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Dec-14 19:54:31 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Dec-14 19:54:31 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:54:31 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:54:31 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:54:31 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:54:31 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:54:31 LOG2 antvel: Parameters to Doppler: Topocentric 86071 2012 349 0.0 2012-Dec-14 19:54:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:54:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:54:31 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:54:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:54:31 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:54:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:54:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Dec-14 19:54:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:54:31 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2012-Dec-14 19:54:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:54:32 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.061673 2012.9577810416508 18.999933 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777775 30.844777777777797 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 1 1.733455863009649 30.752509377312300 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 2 1.741016739598313 30.763300085263502 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 3 1.745122535193268 30.855336663173095 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 4 1.741592875342137 30.937146107934062 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 5 1.733987554282040 30.926108211647737 2012-Dec-14 19:54:32 LOG4 log_alfabeam: ALFABEAM 6 1.729956520687614 30.833510570659495 2012-Dec-14 19:54:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900052 2012-Dec-14 19:54:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:54:32 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Dec-14 19:54:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:54:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:54:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Dec-14 19:54:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86073.00 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:54:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:54:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:54:43 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Dec-14 19:54:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:54:43 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2012-Dec-14 19:54:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Dec-14 19:54:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Dec-14 19:54:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Dec-14 19:54:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:54:43 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2012-Dec-14 19:54:43 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:54:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Dec-14 19:54:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:54:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:54:43 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2012-Dec-14 19:54:43 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Dec-14 19:54:44 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:54:44 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Dec-14 19:54:44 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:54:44 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:54:44 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:54:44 LOG2 antvel: Parameters to Doppler: Topocentric 86083 2012 349 0.0 2012-Dec-14 19:54:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:54:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Dec-14 19:54:44 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Dec-14 19:54:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:54:44 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:54:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:54:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Dec-14 19:54:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:54:44 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Dec-14 19:54:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:54:44 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.065015 2012.9577814219078 18.999933 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777776 30.844777777777779 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 1 1.733473996693441 30.752376954871561 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 2 1.741032701860123 30.763414050832520 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 3 1.745120463268186 30.855583831815206 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 4 1.741574665912831 30.937278540409817 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 5 1.733971515788978 30.925992341919819 2012-Dec-14 19:54:44 LOG4 log_alfabeam: ALFABEAM 6 1.729958790778869 30.833263063598427 2012-Dec-14 19:54:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900053 2012-Dec-14 19:54:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:54:45 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2012-Dec-14 19:54:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:54:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Dec-14 19:54:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Dec-14 19:54:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86086.00 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:54:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:54:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:54:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:54:56 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2012-Dec-14 19:54:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:54:56 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Dec-14 19:54:56 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Dec-14 19:54:56 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:54:56 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Dec-14 19:54:56 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:54:56 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:54:56 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:54:56 LOG2 antvel: Parameters to Doppler: Topocentric 86096 2012 349 0.0 2012-Dec-14 19:54:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:54:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Dec-14 19:54:56 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Dec-14 19:54:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:54:56 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:54:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:54:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Dec-14 19:54:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:54:57 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Dec-14 19:54:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:54:57 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.068636 2012.957781833853 18.999933 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777773 30.844777777777797 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 1 1.733493738880262 30.752233671710695 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 2 1.741050028861305 30.763538529729953 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 3 1.745118155814383 30.855852448995563 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 4 1.741554841249570 30.937421829908399 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 5 1.733954106801267 30.925865787970675 2012-Dec-14 19:54:57 LOG4 log_alfabeam: ALFABEAM 6 1.729961313804571 30.832994091036319 2012-Dec-14 19:54:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900054 2012-Dec-14 19:54:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:54:57 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Dec-14 19:54:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:54:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Dec-14 19:54:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:54:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:54:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Dec-14 19:54:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86098.00 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:54:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:55:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:55:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:55:08 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Dec-14 19:55:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:55:08 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Dec-14 19:55:08 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Dec-14 19:55:08 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:55:08 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Dec-14 19:55:08 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:55:08 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:55:08 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:55:08 LOG2 antvel: Parameters to Doppler: Topocentric 86108 2012 349 0.0 2012-Dec-14 19:55:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:55:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Dec-14 19:55:08 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Dec-14 19:55:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:55:08 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:55:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:55:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Dec-14 19:55:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:55:08 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Dec-14 19:55:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:55:09 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.071978 2012.95778221411 18.999933 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777773 30.844777777777782 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 1 1.733512047545093 30.752101613998850 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 2 1.741066050264103 30.763654344980623 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 3 1.745115967911564 30.856101119841156 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 4 1.741536456087431 30.937553889240000 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 5 1.733938010300765 30.925748046532600 2012-Dec-14 19:55:09 LOG4 log_alfabeam: ALFABEAM 6 1.729963701462654 30.832745102736638 2012-Dec-14 19:55:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900055 2012-Dec-14 19:55:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:55:09 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Dec-14 19:55:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:55:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Dec-14 19:55:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Dec-14 19:55:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86110.00 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:55:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:55:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:55:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:55:20 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Dec-14 19:55:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:55:20 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Dec-14 19:55:20 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Dec-14 19:55:20 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:55:20 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Dec-14 19:55:20 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:55:20 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:55:20 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:55:20 LOG2 antvel: Parameters to Doppler: Topocentric 86120 2012 349 0.0 2012-Dec-14 19:55:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:55:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Dec-14 19:55:20 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Dec-14 19:55:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:55:20 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:55:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:55:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Dec-14 19:55:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:55:21 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2012-Dec-14 19:55:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:55:21 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.075321 2012.957782594367 18.999933 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777777 30.844777777777782 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 1 1.733530446092999 30.751969700728566 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 2 1.741082104525651 30.763771090786317 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 3 1.745113722939337 30.856350585389279 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 4 1.741517980658883 30.937685800026333 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 5 1.733921881477713 30.925629363371300 2012-Dec-14 19:55:21 LOG4 log_alfabeam: ALFABEAM 6 1.729966147009266 30.832495329888335 2012-Dec-14 19:55:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900056 2012-Dec-14 19:55:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:55:21 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2012-Dec-14 19:55:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:55:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Dec-14 19:55:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Dec-14 19:55:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86122.00 2012-Dec-14 19:55:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:55:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=2+3-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+2+3-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=2+3-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+2+3-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+2+3-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:55:23 LOG3 WAPP=1+2+3-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:55:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:55:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:55:32 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2012-Dec-14 19:55:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:55:32 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2012-Dec-14 19:55:32 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Dec-14 19:55:32 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:55:32 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Dec-14 19:55:32 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:55:32 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:55:32 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:55:32 LOG2 antvel: Parameters to Doppler: Topocentric 86132 2012 349 0.0 2012-Dec-14 19:55:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:55:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Dec-14 19:55:32 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Dec-14 19:55:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:55:32 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:55:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:55:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Dec-14 19:55:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:55:32 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2012-Dec-14 19:55:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:55:33 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.078663 2012.9577829746243 18.999933 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777776 30.844777777777782 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 1 1.733548923760835 30.751838016618315 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 2 1.741098181818573 30.763888702307881 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 3 1.745111421768357 30.856600695642864 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 4 1.741499425773491 30.937817477509050 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 5 1.733905730213485 30.925509804477034 2012-Dec-14 19:55:33 LOG4 log_alfabeam: ALFABEAM 6 1.729968649451208 30.832244922791123 2012-Dec-14 19:55:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900057 2012-Dec-14 19:55:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:55:33 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Dec-14 19:55:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:55:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Dec-14 19:55:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Dec-14 19:55:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86134.00 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:55:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:55:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:55:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:55:44 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Dec-14 19:55:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:55:44 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2012-Dec-14 19:55:44 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Dec-14 19:55:44 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:55:44 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Dec-14 19:55:44 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:55:44 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:55:44 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:55:44 LOG2 antvel: Parameters to Doppler: Topocentric 86143 2012 349 0.0 2012-Dec-14 19:55:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:55:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Dec-14 19:55:44 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Dec-14 19:55:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:55:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:55:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:55:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Dec-14 19:55:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:55:44 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2012-Dec-14 19:55:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:55:44 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.081727 2012.9577833231931 18.999933 2012-Dec-14 19:55:44 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777782 30.844777777777779 2012-Dec-14 19:55:44 LOG4 log_alfabeam: ALFABEAM 1 1.733565938939793 30.751717458147482 2012-Dec-14 19:55:44 LOG4 log_alfabeam: ALFABEAM 2 1.741112946001697 30.763997325999320 2012-Dec-14 19:55:44 LOG4 log_alfabeam: ALFABEAM 3 1.745109261648608 30.856830632071901 2012-Dec-14 19:55:44 LOG4 log_alfabeam: ALFABEAM 4 1.741482339484393 30.937938026227229 2012-Dec-14 19:55:45 LOG4 log_alfabeam: ALFABEAM 5 1.733890898719284 30.925399386086987 2012-Dec-14 19:55:45 LOG4 log_alfabeam: ALFABEAM 6 1.729970994761833 30.832014723418805 2012-Dec-14 19:55:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900058 2012-Dec-14 19:55:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:55:45 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2012-Dec-14 19:55:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:55:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Dec-14 19:55:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Dec-14 19:55:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86146.00 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:55:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:55:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:55:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:55:56 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2012-Dec-14 19:55:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:55:56 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2012-Dec-14 19:55:56 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Dec-14 19:55:56 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:55:56 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Dec-14 19:55:56 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:55:56 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:55:56 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:55:56 LOG2 antvel: Parameters to Doppler: Topocentric 86156 2012 349 0.0 2012-Dec-14 19:55:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:55:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Dec-14 19:55:56 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Dec-14 19:55:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:55:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:55:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:55:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Dec-14 19:55:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Dec-14 19:55:57 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Dec-14 19:55:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:55:57 LOG5 log_alfabeam: Parameters: 1.737527777777778 30.844777777777779 1.085348 2012.9577837351383 18.999933 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 0 1.737527777777777 30.844777777777779 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 1 1.733586139483373 30.751575201649008 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 2 1.741130423810279 30.764126682751733 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 3 1.745106646210250 30.857103145888974 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 4 1.741462054514732 30.938080266621064 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 5 1.733873341998861 30.925267896885344 2012-Dec-14 19:55:57 LOG4 log_alfabeam: ALFABEAM 6 1.729973829870550 30.831741910343894 2012-Dec-14 19:55:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 234900059 2012-Dec-14 19:55:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Dec-14 19:55:57 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2012-Dec-14 19:55:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Dec-14 19:55:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Dec-14 19:55:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:55:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:55:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Dec-14 19:55:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86158.00 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 875.023576 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2124.976424 MHz 2012-Dec-14 19:55:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2304.025164 MHz 2012-Dec-14 19:56:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Dec-14 19:56:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Dec-14 19:56:08 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2012-Dec-14 19:56:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Dec-14 19:56:08 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Dec-14 19:56:08 INFO2 smartfreq: Switching off CAL 2012-Dec-14 19:56:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Dec-14 19:56:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Dec-14 19:56:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Dec-14 19:56:08 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2012-Dec-14 19:56:08 LOG3 CALCONTROL-caltrig: Software trigger 2012-Dec-14 19:56:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Dec-14 19:56:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Dec-14 19:56:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Dec-14 19:56:08 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2012-Dec-14 19:56:08 INFO3 restore_frequencies: Restoring original frequencies 2012-Dec-14 19:56:08 LOG5 antvel: Calling 'antvel 14415.100000 305041.200000 J Topocentric 0' 2012-Dec-14 19:56:08 LOG2 antvel: Precessing RA = 01:44:15.1 Dec = +30:50:41.2 Epoch = 2012.95778 J 2012-Dec-14 19:56:08 LOG2 antvel: Computed apparent RA = 01:45:01.5 Dec = +30:54:46.5 2012-Dec-14 19:56:08 LOG2 antvel: Parameters to Doppler: Topocentric 86168 2012 349 0.0 2012-Dec-14 19:56:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Dec-14 19:56:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Dec-14 19:56:08 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2012-Dec-14 19:56:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Dec-14 19:56:08 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Dec-14 19:56:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 19:56:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:56:09 STOP finish_task: Finishing task 'smart frequency switching' 2012-Dec-14 19:56:09 LOG5 finish_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2012-Dec-14 19:56:09 DONE finish_task: DONE finished pattern: smart frequency switching 2012-Dec-14 19:56:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:56:09 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2012-Dec-14 19:56:09 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2012-Dec-14 19:56:09 NOTE run_command_file: DONE with command file processing 2012-Dec-14 19:56:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2012-Dec-14 19:56:09 STOP finish_task: Finishing task 'running command file '121214.cmd'' 2012-Dec-14 19:56:09 LOG5 finish_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2012-Dec-14 19:56:09 DONE finish_task: DONE finished running: command file '121214.cmd' 2012-Dec-14 19:56:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Dec-14 19:56:09 END end_task: Finishing task 'running command file '121214.cmd'' with status 'OK' 2012-Dec-14 19:56:09 LOG5 end_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2012-Dec-14 19:56:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Dec-14 19:56:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Dec-14 19:56:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:56:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:56:31 ALERT CIMA-exit_cima: Exiting CIMA ... 2012-Dec-14 19:56:31 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2012-Dec-14 19:56:32 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2012-Dec-14 19:56:32 LOG3 vw_send: To DATATAKING: mvdata a2048 2012-Dec-14 19:56:32 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2012-Dec-14 19:56:32 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2012-Dec-14 19:56:32 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2012-Dec-14 19:56:32 NOTE CIMA-exit_cima: Cleaning up session ... 2012-Dec-14 19:56:32 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2012-Dec-14 19:56:32 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2012-Dec-14 19:56:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:56:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Dec-14 19:56:34 LOG3 exec_msg: Closing socket 2012-Dec-14 19:56:34 INFO4 bgerror: sock_write: 'connect' error --- Connection refused 2012-Dec-14 19:56:34 INFO4 bgerror: while executing 2012-Dec-14 19:56:34 INFO4 bgerror: "sockmsg" 2012-Dec-14 19:56:34 INFO4 bgerror: (procedure "exec_msg" line 12) 2012-Dec-14 19:56:34 INFO4 bgerror: invoked from within 2012-Dec-14 19:56:34 INFO4 bgerror: "exec_msg" 2012-Dec-14 19:56:34 ERROR bgerror: ERROR script run by 'executive' aborted 2012-Dec-14 19:56:34 ERROR bgerror: ERROR reason: sock_write: 'connect' error --- Connection refused 2012-Dec-14 19:56:34 NOTE bgerror: The error occurred while the executive was executing the following task stack: 2012-Dec-14 19:56:34 NOTE query_task: The executive is IDLE 2012-Dec-14 19:56:34 WARNING abort_task: WARNING cleaning up after crash! 2012-Dec-14 19:56:34 INFO4 clean_up_after_crash: No cleaning required after crash