2012-Oct-30 19:31:03 BEGIN executive: CIMA executive starting ... 2012-Oct-30 19:31:03 NOTE executive: STARTING NEW CIMA SESSION 2012-Oct-30 19:31:03 INFO1 executive: Using CIMA version 3.3.02 'stable' from 2012-06-07 17:14 2012-Oct-30 19:31:03 INFO4 executive: This is an ON-LINE session 2012-Oct-30 19:31:03 INFO4 executive: This is a LOCAL session 2012-Oct-30 19:31:03 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Oct-30 19:31:03 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'ep' 2012-Oct-30 19:31:03 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20121030' 2012-Oct-30 19:31:04 LOG2 log_preferences: Currently applied preferences: 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(dailylog) = daily 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(offlinelog) = write 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(logcolours) = full 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(displaylevel) = LOG5 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(displayformat) = long 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(logformat) = new 2012-Oct-30 19:31:04 LOG2 log_preferences: prefs(fontsize) = 4 2012-Oct-30 19:31:04 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Oct-30 19:31:04 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Oct-30 19:31:04 ALERT executive: CIMA executive ready 2012-Oct-30 19:31:06 NOTE frontend: CIMA frontend ready 2012-Oct-30 19:31:06 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2012-Oct-30 19:31:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:31:06 LOG4 got_cormsg: From DATATAKING: setup 2012-Oct-30 19:31:07 ALERT CIMA-exit_cima: Exiting CIMA ... 2012-Oct-30 19:31:07 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2012-Oct-30 19:31:07 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2012-Oct-30 19:31:07 LOG3 vw_send: To DATATAKING: mvdata a2048 2012-Oct-30 19:31:07 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2012-Oct-30 19:31:07 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2012-Oct-30 19:31:07 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2012-Oct-30 19:31:07 NOTE CIMA-exit_cima: Cleaning up session ... 2012-Oct-30 19:31:09 LOG3 exec_msg: Closing socket 2012-Oct-30 19:31:09 INFO4 bgerror: sock_write: 'connect' error --- Connection refused 2012-Oct-30 19:31:09 INFO4 bgerror: while executing 2012-Oct-30 19:31:09 INFO4 bgerror: "sockmsg" 2012-Oct-30 19:31:09 INFO4 bgerror: (procedure "exec_msg" line 12) 2012-Oct-30 19:31:09 INFO4 bgerror: invoked from within 2012-Oct-30 19:31:09 INFO4 bgerror: "exec_msg" 2012-Oct-30 19:31:09 ERROR bgerror: ERROR script run by 'executive' aborted 2012-Oct-30 19:31:09 ERROR bgerror: ERROR reason: sock_write: 'connect' error --- Connection refused 2012-Oct-30 19:31:09 NOTE bgerror: The error occurred while the executive was executing the following task stack: 2012-Oct-30 19:31:09 NOTE query_task: The executive is IDLE 2012-Oct-30 19:31:09 WARNING abort_task: WARNING cleaning up after crash! 2012-Oct-30 19:31:10 INFO4 clean_up_after_crash: No cleaning required after crash 2012-Oct-30 19:32:21 BEGIN executive: CIMA executive starting ... 2012-Oct-30 19:32:21 NOTE executive: STARTING NEW CIMA SESSION 2012-Oct-30 19:32:22 INFO1 executive: Using CIMA version 3.3.02 'stable' from 2012-06-07 17:14 2012-Oct-30 19:32:22 INFO4 executive: This is an ON-LINE session 2012-Oct-30 19:32:22 INFO4 executive: This is a REMOTE session 2012-Oct-30 19:32:22 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Oct-30 19:32:22 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'RT' 2012-Oct-30 19:32:22 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20121030' 2012-Oct-30 19:32:22 LOG2 log_preferences: Currently applied preferences: 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(dailylog) = daily 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(offlinelog) = write 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(logcolours) = full 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(displaylevel) = LOG5 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(displayformat) = long 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(logformat) = new 2012-Oct-30 19:32:22 LOG2 log_preferences: prefs(fontsize) = 4 2012-Oct-30 19:32:22 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Oct-30 19:32:23 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Oct-30 19:32:23 ALERT executive: CIMA executive ready 2012-Oct-30 19:32:24 NOTE frontend: CIMA frontend ready 2012-Oct-30 19:32:25 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2012-Oct-30 19:32:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:32:25 LOG4 got_cormsg: From DATATAKING: setup 2012-Oct-30 19:32:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:32:30 LOG4 got_cormsg: From DATATAKING: io 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: vw% tape off 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:32:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:32:35 WARNING CIMA-find_last_tsys: WARNING can't read Tsys-file '/share/obs4/rcvm/tsys.log5'! 2012-Oct-30 19:32:35 PROBLEM CIMA-find_last_tsys: Reason: tail: cannot open input 2012-Oct-30 19:32:35 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Oct-30 19:32:35 LOG4 exec_msg: From OBSERVER: select_receiver lbw no no yes 2012-Oct-30 19:32:35 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2012-Oct-30 19:32:35 BEGIN begin_task: Starting task 'selecting receiver L-Band Wide' 2012-Oct-30 19:32:35 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Oct-30 19:32:35 NOTE select_receiver: Starting to select receiver L-Band Wide 2012-Oct-30 19:32:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2012-Oct-30 19:32:35 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2012-Oct-30 19:32:35 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Oct-30 19:32:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Oct-30 19:32:35 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2012-Oct-30 19:32:35 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Oct-30 19:32:36 DONE finish_task: DONE finished selecting: receiver L-Band Wide 2012-Oct-30 19:32:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:32:36 END end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2012-Oct-30 19:32:36 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Oct-30 19:32:36 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2012-Oct-30 19:32:36 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Oct-30 19:32:48 LOG4 got_cormsg: From DATATAKING: waiting for turret position:285.79 2012-Oct-30 19:34:42 LOG4 got_cormsg: From DATATAKING: settinng up if2 2012-Oct-30 19:34:42 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2012-Oct-30 19:34:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:34:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:34:49 NOTE CIMA-load_config_file: Loading and applying configuration file 'ages_lbw_smart.conf' 2012-Oct-30 19:34:51 WARNING CIMA-find_last_tsys: WARNING can't read Tsys-file '/share/obs4/rcvm/tsys.log5'! 2012-Oct-30 19:34:51 PROBLEM CIMA-find_last_tsys: Reason: tail: cannot open input 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "lbw" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "10GHz to 1500" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "275" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "275" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "275" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "275" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "1775.000000" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "on" 2012-Oct-30 19:34:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "lbwpol lin" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "lbfb 7" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "F" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "5" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "7 5" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "4" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "11420.405752" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "0" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "0" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "F" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "0" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "1500" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "1500 1500 1500 1500 1500 1500 1500 1500" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "750" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "F" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "5" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2012-Oct-30 19:34:53 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2012-Oct-30 19:34:53 LOG4 exec_msg: From OBSERVER: config_iflo 2012-Oct-30 19:34:53 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Oct-30 19:34:53 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Oct-30 19:34:53 INFO1 config_iflo: Starting to configure IF/LO path for L-Band Wide 2012-Oct-30 19:34:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Oct-30 19:34:53 INFO1 config_iflo: Selecting receiver L-Band Wide 2012-Oct-30 19:34:53 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver L-Band Wide} 2012-Oct-30 19:34:53 LOG1 select_receiver: Calling 'select_receiver lbw no no yes' 2012-Oct-30 19:34:53 START begin_task: Starting task 'selecting receiver L-Band Wide' 2012-Oct-30 19:34:53 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Oct-30 19:34:53 NOTE select_receiver: Starting to select receiver L-Band Wide 2012-Oct-30 19:34:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver L-Band Wide ...} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: setupall 5 1400.0 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Oct-30 19:34:54 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Oct-30 19:34:54 STOP finish_task: Finishing task 'selecting receiver L-Band Wide' 2012-Oct-30 19:34:54 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Oct-30 19:34:54 INFO2 finish_task: DONE finished selecting: receiver L-Band Wide 2012-Oct-30 19:34:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:34:54 STOP end_task: Finishing task 'selecting receiver L-Band Wide' with status 'OK' 2012-Oct-30 19:34:54 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Oct-30 19:34:54 START begin_task: Starting task 'waiting for receiver L-Band Wide' 2012-Oct-30 19:34:54 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2012-Oct-30 19:34:54 STOP end_task: Finishing task 'waiting for receiver L-Band Wide' with status 'OK' 2012-Oct-30 19:34:54 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2012-Oct-30 19:34:54 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Oct-30 19:34:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: lbwpol lin 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: lbfb 7 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_shcl F} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_rfnum 5} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 7 5} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 4} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11420405752.0} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_ac2sw 0} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_phbsig 0} 2012-Oct-30 19:34:54 LOG3 vw_send: To DATATAKING: if1 {if1_hybrid F} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if1 {if1_phblo 0} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if1 {if1_750nb F} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 5} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq 1500} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_vlbainp 750} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Oct-30 19:34:55 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Oct-30 19:34:55 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Oct-30 19:34:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Oct-30 19:34:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:34:55 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Oct-30 19:34:55 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: setupall 5 1400.0 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: lbwpol lin 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: lbfb 7 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_shcl F} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfnum 5} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 7 5} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 4} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11420405752.0} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Oct-30 19:34:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_ac2sw 0} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_phbsig 0} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_hybrid F} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_phblo 0} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_750nb F} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 5} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq 1500} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 1500 1500 1500 1500 1500 1500 1500 1500} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_vlbainp 750} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Oct-30 19:34:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:35:07 LOG4 got_cormsg: From DATATAKING: settinng up if2 2012-Oct-30 19:35:07 LOG4 got_cormsg: From DATATAKING: setting up if1lo 2012-Oct-30 19:35:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:21 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:35:21 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Oct-30 19:35:21 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2012-Oct-30 19:35:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Oct-30 19:35:21 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Oct-30 19:35:21 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Oct-30 19:35:21 DONE finish_task: DONE finished configuration: IF/LO path 2012-Oct-30 19:35:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:35:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Oct-30 19:35:22 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Oct-30 19:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "1 chan, 9-level, pol a" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "1 chan, 9-level, pol b" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "1 chan, 9-level, pol a" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "1 chan, 9-level, pol b" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "50" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "50" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "25" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "25" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "0" 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "0" 2012-Oct-30 19:35:22 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2012-Oct-30 19:35:22 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2012-Oct-30 19:35:22 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Oct-30 19:35:22 LOG5 begin_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2012-Oct-30 19:35:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Oct-30 19:35:22 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Oct-30 19:35:22 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Oct-30 19:35:22 START begin_task: Starting task 'selecting calibration port' 2012-Oct-30 19:35:22 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2012-Oct-30 19:35:22 LOG3 vw_send: To DATATAKING: calport 3 2012-Oct-30 19:35:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Oct-30 19:35:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:35:22 START begin_task: Starting task 'waiting on calport' 2012-Oct-30 19:35:22 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2012-Oct-30 19:35:22 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Oct-30 19:35:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:23 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:35:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Oct-30 19:35:23 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2012-Oct-30 19:35:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Oct-30 19:35:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Oct-30 19:35:23 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2012-Oct-30 19:35:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Oct-30 19:35:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Oct-30 19:35:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 19:35:23 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2012-Oct-30 19:35:23 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 19:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:35:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 19:35:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 19:35:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 19:35:23 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 19:35:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 19:35:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Oct-30 19:35:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Oct-30 19:35:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 19:35:24 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2012-Oct-30 19:35:24 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 19:35:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 19:35:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 19:35:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 19:35:24 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2012-Oct-30 19:35:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 19:35:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 19:35:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 19:35:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 19:35:24 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Oct-30 19:35:24 LOG5 finish_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2012-Oct-30 19:35:24 DONE finish_task: DONE finished configuring: the WAPPs in single board mode 2012-Oct-30 19:35:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:35:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Oct-30 19:35:24 LOG5 end_task: Level: (1) ID = <10006> Status = 0 0 0 0 ok 2012-Oct-30 19:35:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 19:35:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Oct-30 19:35:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Oct-30 19:35:24 NOTE CIMA-load_config_file: Configuration file 'ages_lbw_smart.conf' applied. 2012-Oct-30 19:35:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 19:35:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20121030.a2048.0000.fits 2012-Oct-30 19:35:25 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20121030.a2048.0000.fits} 2012-Oct-30 19:36:04 COMMAND CIMA-send_to_exec: Sending command to point to a source 2012-Oct-30 19:36:04 LOG4 exec_msg: From OBSERVER: track_new_source FRELLED156 230138 +153215 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 7854 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2012-Oct-30 19:36:04 LOG1 track_new_source: Calling 'track_new_source FRELLED156 230138 +153215 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 7854 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2012-Oct-30 19:36:04 BEGIN begin_task: Starting task 'selecting new source' 2012-Oct-30 19:36:04 LOG5 begin_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2012-Oct-30 19:36:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED156} INFO {Selecting source 'FRELLED156' ...} 2012-Oct-30 19:36:04 LOG3 track_source: Calling 'track_source FRELLED156 230138 +153215 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 7854 Heliocentric velocity(optical)' 2012-Oct-30 19:36:04 START begin_task: Starting task 'sending tracking commands' 2012-Oct-30 19:36:04 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2012-Oct-30 19:36:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED156} INFO {Slewing to source 'FRELLED156' ...} 2012-Oct-30 19:36:04 INFO1 track_source: Starting to track FRELLED156 2012-Oct-30 19:36:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:36:04 LOG3 vw_send: To DATATAKING: set ra 230138 2012-Oct-30 19:36:04 LOG3 vw_send: To DATATAKING: set dec +153215 2012-Oct-30 19:36:04 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Oct-30 19:36:04 LOG3 vw_send: To DATATAKING: pnt tr 230138 +153215 -CJ 2012-Oct-30 19:36:04 LOG3 vw_send: To DATATAKING: dopsetvel 7854 hel 2012-Oct-30 19:36:04 STOP finish_task: Finishing task 'sending tracking commands' 2012-Oct-30 19:36:04 LOG5 finish_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2012-Oct-30 19:36:04 INFO2 finish_task: DONE finished sending: tracking commands 2012-Oct-30 19:36:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:36:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Oct-30 19:36:04 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2012-Oct-30 19:36:04 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2012-Oct-30 19:36:04 START begin_task: Starting task 'applying pointing corrections' 2012-Oct-30 19:36:04 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Oct-30 19:36:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2012-Oct-30 19:36:05 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 19:36:05 STOP finish_task: Finishing task 'applying pointing corrections' 2012-Oct-30 19:36:05 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Oct-30 19:36:05 INFO2 finish_task: DONE finished applying: pointing corrections 2012-Oct-30 19:36:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:36:05 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2012-Oct-30 19:36:05 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Oct-30 19:36:05 STOP finish_task: Finishing task 'selecting new source' 2012-Oct-30 19:36:05 LOG5 finish_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2012-Oct-30 19:36:05 DONE finish_task: DONE finished selecting: new source 2012-Oct-30 19:36:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:36:05 END end_task: Finishing task 'selecting new source' with status 'OK' 2012-Oct-30 19:36:05 LOG5 end_task: Level: (1) ID = <10011> Status = 0 0 0 0 ok 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: set ra 230138 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: vw% 230138 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: set dec +153215 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: +153215 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: pnt tr 230138 +153215 -CJ 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 7854 hel 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 19:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:06 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2012-Oct-30 19:36:06 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2012-Oct-30 19:36:06 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2012-Oct-30 19:36:06 BEGIN begin_task: Starting task 'standard on/off' 2012-Oct-30 19:36:06 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2012-Oct-30 19:36:06 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'FRELLED156' 2012-Oct-30 19:36:06 INFO1 onoff_wapp: Starting pattern: Standard on/off 2012-Oct-30 19:36:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2012-Oct-30 19:36:06 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 19:36:06 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Oct-30 19:36:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 19:36:06 LOG3 waittrk: Start waittrk 5 2012-Oct-30 19:36:06 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 19:36:06 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Oct-30 19:36:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 19:36:11 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Oct-30 19:36:11 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 19:36:11 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Oct-30 19:36:37 COMMAND CIMA-send_to_exec: Sending command to abort observation 2012-Oct-30 19:36:37 LOG4 exec_msg: From OBSERVER: abort_task abort 2012-Oct-30 19:36:37 WARNING abort_task: WARNING abort requested! 2012-Oct-30 19:36:37 WARNING abort_task: WARNING Aborting wait for waiting on telescope on source 2012-Oct-30 19:36:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'ABORT' 2012-Oct-30 19:36:37 LOG5 end_task: Level: (3) ID = <10017> Status = 1 0 0 0 abort 2012-Oct-30 19:36:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:36:37 LOG4 waittrk: Current telescope position: Az = 275.60 ZA = 12.23 2012-Oct-30 19:36:37 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 19:36:37 LOG5 finish_task: Level: (2) ID = <10015> Status = 1 0 0 0 abort 2012-Oct-30 19:36:37 WARNING finish_task: WARNING aborted waiting: telescope on source 2012-Oct-30 19:36:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Aborted 2012-Oct-30 19:36:37 STOP end_task: Finishing task 'waiting on telescope' with status 'ABORT' 2012-Oct-30 19:36:37 LOG5 end_task: Level: (2) ID = <10015> Status = 1 0 0 0 abort 2012-Oct-30 19:36:37 STOP finish_task: Finishing task 'standard on/off' 2012-Oct-30 19:36:37 LOG5 finish_task: Level: (1) ID = <10014> Status = 1 0 0 0 abort 2012-Oct-30 19:36:37 WARNING finish_task: WARNING aborted pattern: standard on/off 2012-Oct-30 19:36:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2012-Oct-30 19:36:38 END end_task: Finishing task 'standard on/off' with status 'ABORT' 2012-Oct-30 19:36:38 LOG5 end_task: Level: (1) ID = <10014> Status = 1 0 0 0 abort 2012-Oct-30 19:36:49 COMMAND CIMA-send_to_exec: Sending command to point to a source 2012-Oct-30 19:36:49 LOG4 exec_msg: From OBSERVER: track_new_source FRELLED169 230151 +173043 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 9878 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2012-Oct-30 19:36:49 LOG1 track_new_source: Calling 'track_new_source FRELLED169 230151 +173043 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 9878 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2012-Oct-30 19:36:49 BEGIN begin_task: Starting task 'selecting new source' 2012-Oct-30 19:36:49 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2012-Oct-30 19:36:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED169} INFO {Selecting source 'FRELLED169' ...} 2012-Oct-30 19:36:49 LOG3 track_source: Calling 'track_source FRELLED169 230151 +173043 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 9878 Heliocentric velocity(optical)' 2012-Oct-30 19:36:49 START begin_task: Starting task 'sending tracking commands' 2012-Oct-30 19:36:49 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED169} INFO {Slewing to source 'FRELLED169' ...} 2012-Oct-30 19:36:50 INFO1 track_source: Starting to track FRELLED169 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: set ra 230151 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: set dec +173043 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: pnt tr 230151 +173043 -CJ 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: dopsetvel 9878 hel 2012-Oct-30 19:36:50 STOP finish_task: Finishing task 'sending tracking commands' 2012-Oct-30 19:36:50 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 INFO2 finish_task: DONE finished sending: tracking commands 2012-Oct-30 19:36:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:36:50 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Oct-30 19:36:50 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2012-Oct-30 19:36:50 START begin_task: Starting task 'applying pointing corrections' 2012-Oct-30 19:36:50 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2012-Oct-30 19:36:50 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 19:36:50 STOP finish_task: Finishing task 'applying pointing corrections' 2012-Oct-30 19:36:50 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 INFO2 finish_task: DONE finished applying: pointing corrections 2012-Oct-30 19:36:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:36:50 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2012-Oct-30 19:36:50 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 STOP finish_task: Finishing task 'selecting new source' 2012-Oct-30 19:36:50 LOG5 finish_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 DONE finish_task: DONE finished selecting: new source 2012-Oct-30 19:36:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:36:50 END end_task: Finishing task 'selecting new source' with status 'OK' 2012-Oct-30 19:36:50 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2012-Oct-30 19:36:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: set ra 230151 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: vw% 230151 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: set dec +173043 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: +173043 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: pnt tr 230151 +173043 -CJ 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 9878 hel 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 19:36:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:36:52 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2012-Oct-30 19:36:52 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2012-Oct-30 19:36:52 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2012-Oct-30 19:36:52 BEGIN begin_task: Starting task 'standard on/off' 2012-Oct-30 19:36:52 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2012-Oct-30 19:36:52 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'FRELLED169' 2012-Oct-30 19:36:52 INFO1 onoff_wapp: Starting pattern: Standard on/off 2012-Oct-30 19:36:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2012-Oct-30 19:36:52 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 19:36:52 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2012-Oct-30 19:36:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 19:36:52 LOG3 waittrk: Start waittrk 5 2012-Oct-30 19:36:52 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 19:36:52 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Oct-30 19:36:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 19:36:57 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Oct-30 19:36:57 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 19:36:57 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2012-Oct-30 19:38:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 19:38:42 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2012-Oct-30 19:38:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:38:42 INFO2 waittrk: Now tracking FRELLED169 2012-Oct-30 19:38:42 LOG4 waittrk: Current telescope position: Az = 269.34 ZA = 17.14 2012-Oct-30 19:38:42 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 19:38:42 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2012-Oct-30 19:38:42 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 19:38:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:38:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 19:38:42 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2012-Oct-30 19:38:42 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 19:38:42 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2012-Oct-30 19:38:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 19:38:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 19:38:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:38:43 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 19:38:43 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Oct-30 19:38:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 19:38:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:38:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:43 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:38:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 19:38:43 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Oct-30 19:38:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 19:38:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 19:38:43 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2012-Oct-30 19:38:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 19:38:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 19:38:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 19:38:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 19:38:43 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20121030.a2048.0000.fits' is empty! 2012-Oct-30 19:38:43 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2012-Oct-30 19:38:43 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2012-Oct-30 19:38:43 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 19:38:43 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2012-Oct-30 19:38:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 19:38:43 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 19:38:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:38:43 LOG3 vw_send: To DATATAKING: pnt tr 230151.000000 173043.000000 -CJ 2012-Oct-30 19:38:43 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 19:38:43 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2012-Oct-30 19:38:43 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 19:38:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:38:43 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 19:38:43 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2012-Oct-30 19:38:44 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 19:38:44 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2012-Oct-30 19:38:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 19:38:44 LOG3 waittrk: Start waittrk 5 2012-Oct-30 19:38:44 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 19:38:44 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2012-Oct-30 19:38:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:38:44 LOG4 got_cormsg: From DATATAKING: pnt tr 230151.000000 173043.000000 -CJ 2012-Oct-30 19:38:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:38:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 19:38:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 19:38:49 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2012-Oct-30 19:38:49 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 19:38:49 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Oct-30 19:38:50 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 19:38:50 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Oct-30 19:38:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:38:50 INFO2 waittrk: Now tracking FRELLED169 2012-Oct-30 19:38:50 LOG4 waittrk: Current telescope position: Az = 269.35 ZA = 17.11 2012-Oct-30 19:38:50 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 19:38:50 LOG5 finish_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2012-Oct-30 19:38:50 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 19:38:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:38:50 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 19:38:50 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2012-Oct-30 19:38:50 LOG5 antvel: Calling 'antvel 230151.000000 173043.000000 J Heliocentric 0' 2012-Oct-30 19:38:50 LOG2 antvel: Precessing RA = 23:01:51.0 Dec = +17:30:43.0 Epoch = 2012.83455 J 2012-Oct-30 19:38:50 LOG2 antvel: Computed apparent RA = 23:02:30.7 Dec = +17:35:09.3 2012-Oct-30 19:38:50 LOG2 antvel: Parameters to Doppler: Heliocentric 85130 2012 304 0.0 2012-Oct-30 19:38:50 INFO5 antvel: Computed antenna velocity: +19.49220 km/s 2012-Oct-30 19:38:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=9878.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.492202896999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Oct-30 19:38:50 INFO4 dopset_gen: New sky frequencies: 1375.007643 1375.007643 1375.007643 1375.007643 1375.007643 1375.007643 1375.007643 1375.007643 1375.007643 2012-Oct-30 19:38:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.007643 sky0=1375.007643 sky1=1375.007643 sky2=1375.007643 sky3=1375.007643 sky4=1375.007643 sky5=1375.007643 sky6=1375.007643 sky7=1375.007643 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2012-Oct-30 19:38:50 LOG2 dopset_gen: Result from 'sky2syn': 11375.007643 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2012-Oct-30 19:38:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11375007643.0} 2012-Oct-30 19:38:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 19:38:50 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 19:38:50 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2012-Oct-30 19:38:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Oct-30 19:38:51 INFO2 adjust_power: Starting to adjust WAPP power 2012-Oct-30 19:38:51 LOG3 vw_send: To DATATAKING: adjpwrif1 2012-Oct-30 19:38:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2012-Oct-30 19:38:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:38:51 START begin_task: Starting task 'waiting on adjpwrif1' 2012-Oct-30 19:38:51 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Oct-30 19:38:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11375007643.0} 2012-Oct-30 19:38:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:51 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2012-Oct-30 19:38:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:38:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:53 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:38:53 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2012-Oct-30 19:38:53 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Oct-30 19:38:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2012-Oct-30 19:38:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Oct-30 19:38:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Oct-30 19:38:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:38:53 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Oct-30 19:38:53 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Oct-30 19:38:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Oct-30 19:38:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:55 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:38:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Oct-30 19:38:55 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Oct-30 19:38:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Oct-30 19:38:55 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 19:38:55 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Oct-30 19:38:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Oct-30 19:38:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2012-Oct-30 19:38:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2012-Oct-30 19:38:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2012-Oct-30 19:38:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2012-Oct-30 19:38:55 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Oct-30 19:38:55 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Oct-30 19:38:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:38:56 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 14 dB 2012-Oct-30 19:38:56 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 8 11 dB 2012-Oct-30 19:38:56 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 11 dB 2012-Oct-30 19:38:56 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2012-Oct-30 19:38:56 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2012-Oct-30 19:38:56 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2012-Oct-30 19:38:56 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2012-Oct-30 19:38:56 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2012-Oct-30 19:38:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Oct-30 19:38:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Oct-30 19:38:56 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Oct-30 19:38:56 INFO2 wapp_adjpwr: WAPP power: 0.946 1.133 0.875 1.000 2012-Oct-30 19:38:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 19:38:56 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Oct-30 19:38:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Oct-30 19:38:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:38:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 19:38:56 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Oct-30 19:38:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 19:38:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 19:38:56 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2012-Oct-30 19:38:56 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Oct-30 19:38:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:38:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 19:38:56 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2012-Oct-30 19:38:56 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2012-Oct-30 19:38:56 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 19:38:56 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2012-Oct-30 19:38:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2012-Oct-30 19:38:56 INFO2 take_data: Starting WAPP 300-second scan: 230400224 2012-Oct-30 19:38:57 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 19:38:57 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Oct-30 19:38:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 19:38:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2012-Oct-30 19:38:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85138.00 2012-Oct-30 19:38:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11375.007643 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 19:38:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:38:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:38:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:38:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764332 != 85764329 diff = 3)! 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:39:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:39:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:39:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:39:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:39:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:39:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:39:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:39:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804397 != 85804398 diff = 1)! 2012-Oct-30 19:39:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804397 != 85804398 diff = 1)! 2012-Oct-30 19:39:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804397 != 85804398 diff = 1)! 2012-Oct-30 19:39:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804397 != 85804398 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:39:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804447 != 85804446 diff = 1)! 2012-Oct-30 19:40:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86303120 != 86303119 diff = 1)! 2012-Oct-30 19:40:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86303120 != 86303119 diff = 1)! 2012-Oct-30 19:40:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86303120 != 86303119 diff = 1)! 2012-Oct-30 19:40:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764340 != 85764339 diff = 1)! 2012-Oct-30 19:40:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764340 != 85764339 diff = 1)! 2012-Oct-30 19:40:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764340 != 85764339 diff = 1)! 2012-Oct-30 19:40:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764340 != 85764339 diff = 1)! 2012-Oct-30 19:40:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764340 != 85764339 diff = 1)! 2012-Oct-30 19:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:40:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:40:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85803244 != 85803243 diff = 1)! 2012-Oct-30 19:40:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85803244 != 85803243 diff = 1)! 2012-Oct-30 19:40:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85803244 != 85803243 diff = 1)! 2012-Oct-30 19:40:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85776926 != 85776925 diff = 1)! 2012-Oct-30 19:40:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85776926 != 85776925 diff = 1)! 2012-Oct-30 19:40:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85776926 != 85776925 diff = 1)! 2012-Oct-30 19:40:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85776926 != 85776925 diff = 1)! 2012-Oct-30 19:40:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85765444 != 85765443 diff = 1)! 2012-Oct-30 19:40:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85765444 != 85765443 diff = 1)! 2012-Oct-30 19:40:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85765444 != 85765443 diff = 1)! 2012-Oct-30 19:40:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85765444 != 85765443 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85799764 != 85799763 diff = 1)! 2012-Oct-30 19:41:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764304 != 85764303 diff = 1)! 2012-Oct-30 19:41:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804411 != 85804412 diff = 1)! 2012-Oct-30 19:41:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804411 != 85804412 diff = 1)! 2012-Oct-30 19:41:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804411 != 85804412 diff = 1)! 2012-Oct-30 19:41:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764284 != 85764283 diff = 1)! 2012-Oct-30 19:41:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764284 != 85764283 diff = 1)! 2012-Oct-30 19:41:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764284 != 85764283 diff = 1)! 2012-Oct-30 19:42:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764295 != 85764296 diff = 1)! 2012-Oct-30 19:42:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764295 != 85764296 diff = 1)! 2012-Oct-30 19:42:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764295 != 85764296 diff = 1)! 2012-Oct-30 19:42:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804404 != 85804403 diff = 1)! 2012-Oct-30 19:42:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764308 != 85764307 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:42:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764312 != 85764311 diff = 1)! 2012-Oct-30 19:42:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85780156 != 85780155 diff = 1)! 2012-Oct-30 19:42:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85780156 != 85780155 diff = 1)! 2012-Oct-30 19:42:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804415 != 85804416 diff = 1)! 2012-Oct-30 19:42:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804415 != 85804416 diff = 1)! 2012-Oct-30 19:42:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804415 != 85804413 diff = 2)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:42:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:43:09 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:43:09.298 (seconds: 70989.298)!} 2012-Oct-30 19:43:09 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:43:09.298 (seconds: 70989.298)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:43:10 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 70988.0 to 70989.0! 2012-Oct-30 19:43:11 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (70988.0 - 70990.0)! 2012-Oct-30 19:43:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764717 != 85764718 diff = 1)! 2012-Oct-30 19:43:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764717 != 85764718 diff = 1)! 2012-Oct-30 19:43:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804011 != 85804012 diff = 1)! 2012-Oct-30 19:43:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804011 != 85804012 diff = 1)! 2012-Oct-30 19:43:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804011 != 85804012 diff = 1)! 2012-Oct-30 19:43:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804011 != 85804010 diff = 1)! 2012-Oct-30 19:43:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85779964 != 85779963 diff = 1)! 2012-Oct-30 19:43:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85779964 != 85779963 diff = 1)! 2012-Oct-30 19:43:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764314 != 85764313 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85924740 != 85924739 diff = 1)! 2012-Oct-30 19:43:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85770350 != 85770349 diff = 1)! 2012-Oct-30 19:43:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 19:43:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 19:43:58 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Oct-30 19:43:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 19:43:58 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2012-Oct-30 19:43:58 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2012-Oct-30 19:43:58 LOG2 onoff_wapp: Parameters: RA-offset: -90.95729999999925 arcminutes wait: 60 secs 2012-Oct-30 19:43:58 LOG4 track_offsets: Calling 'track_offsets -90.95729999999925 0.0 main small' 2012-Oct-30 19:43:58 START begin_task: Starting task 'sending telescope offsets' 2012-Oct-30 19:43:58 LOG5 begin_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2012-Oct-30 19:43:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2012-Oct-30 19:43:58 INFO2 track_offsets: Starting to send new offsets 2012-Oct-30 19:43:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:43:58 LOG3 vw_send: To DATATAKING: pnt tr 230151.000000 173043.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 19:43:58 STOP finish_task: Finishing task 'sending telescope offsets' 2012-Oct-30 19:43:58 LOG5 finish_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2012-Oct-30 19:43:58 INFO2 finish_task: DONE finished sending: telescope offsets 2012-Oct-30 19:43:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:43:58 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2012-Oct-30 19:43:59 LOG5 end_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2012-Oct-30 19:43:59 INFO2 lstwait: Waiting for 59.8 secs from LST 21:55:42 to LST 21:56:42 ... 2012-Oct-30 19:43:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Oct-30 19:43:59 START begin_task: Starting task 'waiting on wait on LST' 2012-Oct-30 19:43:59 LOG5 begin_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2012-Oct-30 19:43:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:43:59 LOG4 got_cormsg: From DATATAKING: pnt tr 230151.000000 173043.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 19:43:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:44:40 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'FRELLED169' (after 41 seconds) 2012-Oct-30 19:44:40 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 19 seconds to spare (41 < 60 seconds) 2012-Oct-30 19:44:59 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Oct-30 19:44:59 LOG5 end_task: Level: (2) ID = <10039> Status = 0 0 0 0 ok 2012-Oct-30 19:44:59 LOG4 lstwait: Finished waiting 0.16 seconds late 2012-Oct-30 19:44:59 INFO3 lstwait: Finished waiting 2012-Oct-30 19:44:59 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:44:59 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2012-Oct-30 19:44:59 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 19:44:59 LOG5 begin_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2012-Oct-30 19:44:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2012-Oct-30 19:44:59 INFO2 take_data: Starting WAPP 300-second scan: 230400225 2012-Oct-30 19:44:59 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 19:44:59 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2012-Oct-30 19:44:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 19:44:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2012-Oct-30 19:44:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85500.00 2012-Oct-30 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11375.007643 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:45:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:45:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804420 != 85804419 diff = 1)! 2012-Oct-30 19:45:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804420 != 85804419 diff = 1)! 2012-Oct-30 19:45:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804420 != 85804419 diff = 1)! 2012-Oct-30 19:45:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783966 != 85783965 diff = 1)! 2012-Oct-30 19:45:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783966 != 85783965 diff = 1)! 2012-Oct-30 19:45:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783966 != 85783965 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:45:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804414 != 85804413 diff = 1)! 2012-Oct-30 19:45:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790396 != 85790395 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85778409 != 85778408 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85778409 != 85778410 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85778409 != 85778410 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85778409 != 85778410 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778409 != 85778408 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85778409 != 85778408 diff = 1)! 2012-Oct-30 19:45:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85778409 != 85778410 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85776265 != 85776266 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85776265 != 85776264 diff = 1)! 2012-Oct-30 19:45:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86123900 != 86123899 diff = 1)! 2012-Oct-30 19:46:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764315 != 85764316 diff = 1)! 2012-Oct-30 19:46:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764315 != 85764316 diff = 1)! 2012-Oct-30 19:46:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764318 != 85764317 diff = 1)! 2012-Oct-30 19:46:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85774206 != 85774205 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85786941 != 85786942 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85786941 != 85786940 diff = 1)! 2012-Oct-30 19:46:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:46:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804390 != 85804389 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:46:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764329 != 85764330 diff = 1)! 2012-Oct-30 19:46:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764329 != 85764330 diff = 1)! 2012-Oct-30 19:46:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764329 != 85764330 diff = 1)! 2012-Oct-30 19:46:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764329 != 85764330 diff = 1)! 2012-Oct-30 19:46:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764298 != 85764297 diff = 1)! 2012-Oct-30 19:46:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764298 != 85764296 diff = 2)! 2012-Oct-30 19:46:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764298 != 85764296 diff = 2)! 2012-Oct-30 19:46:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764298 != 85764296 diff = 2)! 2012-Oct-30 19:46:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764298 != 85764297 diff = 1)! 2012-Oct-30 19:46:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764298 != 85764296 diff = 2)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764287 != 85764288 diff = 1)! 2012-Oct-30 19:47:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804416 != 85804415 diff = 1)! 2012-Oct-30 19:47:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804416 != 85804415 diff = 1)! 2012-Oct-30 19:47:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804416 != 85804415 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85843377 != 85843378 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85843377 != 85843378 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85843377 != 85843378 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85843377 != 85843378 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85843377 != 85843378 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85843377 != 85843376 diff = 1)! 2012-Oct-30 19:47:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86205445 != 86205446 diff = 1)! 2012-Oct-30 19:47:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86205445 != 86205446 diff = 1)! 2012-Oct-30 19:47:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86205445 != 86205444 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:47:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804467 != 85804468 diff = 1)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85883356 != 85883354 diff = 2)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85883356 != 85883354 diff = 2)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85883356 != 85883354 diff = 2)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85883356 != 85883354 diff = 2)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85883356 != 85883355 diff = 1)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85883356 != 85883355 diff = 1)! 2012-Oct-30 19:48:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85883356 != 85883354 diff = 2)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85779093 != 85779092 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85779093 != 85779092 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85779093 != 85779094 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85779093 != 85779094 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85779093 != 85779094 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85779093 != 85779094 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85779093 != 85779094 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85779093 != 85779092 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85779093 != 85779092 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85779093 != 85779092 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85779093 != 85779094 diff = 1)! 2012-Oct-30 19:48:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85779093 != 85779092 diff = 1)! 2012-Oct-30 19:48:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86285684 != 86285683 diff = 1)! 2012-Oct-30 19:48:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804435 != 85804436 diff = 1)! 2012-Oct-30 19:48:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804435 != 85804436 diff = 1)! 2012-Oct-30 19:48:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804435 != 85804436 diff = 1)! 2012-Oct-30 19:48:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804435 != 85804436 diff = 1)! 2012-Oct-30 19:48:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804403 != 85804404 diff = 1)! 2012-Oct-30 19:49:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85958971 != 85958972 diff = 1)! 2012-Oct-30 19:49:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85958971 != 85958972 diff = 1)! 2012-Oct-30 19:49:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85958971 != 85958972 diff = 1)! 2012-Oct-30 19:49:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85958971 != 85958972 diff = 1)! 2012-Oct-30 19:49:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85958971 != 85958972 diff = 1)! 2012-Oct-30 19:49:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764291 != 85764292 diff = 1)! 2012-Oct-30 19:49:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764291 != 85764292 diff = 1)! 2012-Oct-30 19:49:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86406094 != 86406093 diff = 1)! 2012-Oct-30 19:49:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86406094 != 86406093 diff = 1)! 2012-Oct-30 19:49:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86406094 != 86406093 diff = 1)! 2012-Oct-30 19:49:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86406094 != 86406093 diff = 1)! 2012-Oct-30 19:49:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86406094 != 86406093 diff = 1)! 2012-Oct-30 19:49:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86406094 != 86406093 diff = 1)! 2012-Oct-30 19:49:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804436 != 85804435 diff = 1)! 2012-Oct-30 19:49:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804436 != 85804435 diff = 1)! 2012-Oct-30 19:49:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804436 != 85804435 diff = 1)! 2012-Oct-30 19:49:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804436 != 85804435 diff = 1)! 2012-Oct-30 19:49:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804436 != 85804435 diff = 1)! 2012-Oct-30 19:49:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804436 != 85804435 diff = 1)! 2012-Oct-30 19:49:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85951538 != 85951537 diff = 1)! 2012-Oct-30 19:49:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85951538 != 85951537 diff = 1)! 2012-Oct-30 19:49:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85951538 != 85951537 diff = 1)! 2012-Oct-30 19:49:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85951538 != 85951537 diff = 1)! 2012-Oct-30 19:49:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85776042 != 85776041 diff = 1)! 2012-Oct-30 19:49:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85776042 != 85776041 diff = 1)! 2012-Oct-30 19:49:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85776042 != 85776041 diff = 1)! 2012-Oct-30 19:49:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85776042 != 85776041 diff = 1)! 2012-Oct-30 19:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804441 != 85804440 diff = 1)! 2012-Oct-30 19:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804441 != 85804440 diff = 1)! 2012-Oct-30 19:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804441 != 85804440 diff = 1)! 2012-Oct-30 19:49:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804441 != 85804440 diff = 1)! 2012-Oct-30 19:49:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764328 != 85764327 diff = 1)! 2012-Oct-30 19:49:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:49:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:49:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:49:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764332 != 85764331 diff = 1)! 2012-Oct-30 19:50:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 19:50:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 19:50:00 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2012-Oct-30 19:50:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 19:50:00 LOG5 end_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2012-Oct-30 19:50:00 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2012-Oct-30 19:50:00 START begin_task: Starting task 'WAPP calibration' 2012-Oct-30 19:50:00 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2012-Oct-30 19:50:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2012-Oct-30 19:50:00 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 19:50:00 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Oct-30 19:50:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 19:50:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 19:50:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:50:00 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 19:50:00 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Oct-30 19:50:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 19:50:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:50:01 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:50:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 19:50:01 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Oct-30 19:50:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 19:50:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 19:50:01 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Oct-30 19:50:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Oct-30 19:50:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Oct-30 19:50:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Oct-30 19:50:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 19:50:01 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Oct-30 19:50:01 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 19:50:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:50:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Oct-30 19:50:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 19:50:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 19:50:01 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Oct-30 19:50:01 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Oct-30 19:50:01 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 19:50:01 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2012-Oct-30 19:50:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Oct-30 19:50:01 INFO2 take_data: Starting WAPP 10-second scan: 230400226 2012-Oct-30 19:50:02 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 19:50:02 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2012-Oct-30 19:50:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 19:50:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Oct-30 19:50:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85803.00 2012-Oct-30 19:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11375.007643 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 19:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 19:50:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 19:50:13 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2012-Oct-30 19:50:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 19:50:13 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2012-Oct-30 19:50:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Oct-30 19:50:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Oct-30 19:50:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Oct-30 19:50:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 19:50:13 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2012-Oct-30 19:50:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (859785507 != 859785506 diff = 1)! 2012-Oct-30 19:50:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (859785507 != 859785508 diff = 1)! 2012-Oct-30 19:50:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (859785507 != 859785506 diff = 1)! 2012-Oct-30 19:50:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (859785507 != 859785506 diff = 1)! 2012-Oct-30 19:50:13 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 19:50:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 19:50:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 19:50:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 19:50:14 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2012-Oct-30 19:50:14 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Oct-30 19:50:14 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 19:50:14 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Oct-30 19:50:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Oct-30 19:50:14 INFO2 take_data: Starting WAPP 10-second scan: 230400227 2012-Oct-30 19:50:14 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 19:50:14 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Oct-30 19:50:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 19:50:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Oct-30 19:50:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85815.00 2012-Oct-30 19:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11375.007643 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 19:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.007643 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:50:25 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Oct-30 19:50:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 19:50:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (858600041 != 858600042 diff = 1)! 2012-Oct-30 19:50:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 19:50:25 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Oct-30 19:50:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 19:50:25 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Oct-30 19:50:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 19:50:25 STOP finish_task: Finishing task 'WAPP calibration' 2012-Oct-30 19:50:25 LOG5 finish_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2012-Oct-30 19:50:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2012-Oct-30 19:50:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:50:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2012-Oct-30 19:50:25 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2012-Oct-30 19:50:25 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 19:50:25 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2012-Oct-30 19:50:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 19:50:26 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 19:50:26 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:50:26 LOG3 vw_send: To DATATAKING: pnt tr 230151.000000 173043.000000 -CJ 2012-Oct-30 19:50:26 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 19:50:26 LOG5 finish_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2012-Oct-30 19:50:26 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 19:50:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:50:26 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 19:50:26 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2012-Oct-30 19:50:26 STOP finish_task: Finishing task 'standard on/off' 2012-Oct-30 19:50:26 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2012-Oct-30 19:50:26 DONE finish_task: DONE finished pattern: standard on/off 2012-Oct-30 19:50:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:50:26 END end_task: Finishing task 'standard on/off' with status 'OK' 2012-Oct-30 19:50:26 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2012-Oct-30 19:50:26 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED169" 2012-Oct-30 19:50:26 LOG4 got_cormsg: From DATATAKING: pnt tr 230151.000000 173043.000000 -CJ 2012-Oct-30 19:50:26 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:50:34 COMMAND CIMA-send_to_exec: Sending command to point to a source 2012-Oct-30 19:50:34 LOG4 exec_msg: From OBSERVER: track_new_source FRELLED156 230138 +153215 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 7854 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2012-Oct-30 19:50:34 LOG1 track_new_source: Calling 'track_new_source FRELLED156 230138 +153215 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 7854 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2012-Oct-30 19:50:34 BEGIN begin_task: Starting task 'selecting new source' 2012-Oct-30 19:50:34 LOG5 begin_task: Level: (1) ID = <10052> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED156} INFO {Selecting source 'FRELLED156' ...} 2012-Oct-30 19:50:35 LOG3 track_source: Calling 'track_source FRELLED156 230138 +153215 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 7854 Heliocentric velocity(optical)' 2012-Oct-30 19:50:35 START begin_task: Starting task 'sending tracking commands' 2012-Oct-30 19:50:35 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED156} INFO {Slewing to source 'FRELLED156' ...} 2012-Oct-30 19:50:35 INFO1 track_source: Starting to track FRELLED156 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: set ra 230138 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: set dec +153215 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: pnt tr 230138 +153215 -CJ 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: dopsetvel 7854 hel 2012-Oct-30 19:50:35 STOP finish_task: Finishing task 'sending tracking commands' 2012-Oct-30 19:50:35 LOG5 finish_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 INFO2 finish_task: DONE finished sending: tracking commands 2012-Oct-30 19:50:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:50:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Oct-30 19:50:35 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2012-Oct-30 19:50:35 START begin_task: Starting task 'applying pointing corrections' 2012-Oct-30 19:50:35 LOG5 begin_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2012-Oct-30 19:50:35 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 19:50:35 STOP finish_task: Finishing task 'applying pointing corrections' 2012-Oct-30 19:50:35 LOG5 finish_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 INFO2 finish_task: DONE finished applying: pointing corrections 2012-Oct-30 19:50:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:50:35 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2012-Oct-30 19:50:35 LOG5 end_task: Level: (2) ID = <10054> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 STOP finish_task: Finishing task 'selecting new source' 2012-Oct-30 19:50:35 LOG5 finish_task: Level: (1) ID = <10052> Status = 0 0 0 0 ok 2012-Oct-30 19:50:35 DONE finish_task: DONE finished selecting: new source 2012-Oct-30 19:50:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 19:50:36 END end_task: Finishing task 'selecting new source' with status 'OK' 2012-Oct-30 19:50:36 LOG5 end_task: Level: (1) ID = <10052> Status = 0 0 0 0 ok 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: set ra 230138 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: vw% 230138 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: set dec +153215 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: +153215 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: pnt tr 230138 +153215 -CJ 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 7854 hel 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 19:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:50:37 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2012-Oct-30 19:50:37 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2012-Oct-30 19:50:37 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2012-Oct-30 19:50:37 BEGIN begin_task: Starting task 'standard on/off' 2012-Oct-30 19:50:37 LOG5 begin_task: Level: (1) ID = <10055> Status = 0 0 0 0 ok 2012-Oct-30 19:50:37 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'FRELLED156' 2012-Oct-30 19:50:37 INFO1 onoff_wapp: Starting pattern: Standard on/off 2012-Oct-30 19:50:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2012-Oct-30 19:50:37 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 19:50:37 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2012-Oct-30 19:50:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 19:50:37 LOG3 waittrk: Start waittrk 5 2012-Oct-30 19:50:37 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 19:50:37 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Oct-30 19:50:42 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 19:50:42 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Oct-30 19:50:42 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 19:50:42 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 19:51:11 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:51:11 INFO2 waittrk: Now tracking FRELLED156 2012-Oct-30 19:51:11 LOG4 waittrk: Current telescope position: Az = 278.27 ZA = 14.44 2012-Oct-30 19:51:11 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 19:51:11 LOG5 finish_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 19:51:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:51:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 19:51:11 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 19:51:11 LOG5 begin_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 19:51:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 19:51:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:51:11 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 19:51:11 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 19:51:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:51:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:11 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:51:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 19:51:11 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 19:51:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 19:51:11 LOG5 end_task: Level: (2) ID = <10059> Status = 0 0 0 0 ok 2012-Oct-30 19:51:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 19:51:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 19:51:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 19:51:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 19:51:12 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2012-Oct-30 19:51:12 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2012-Oct-30 19:51:12 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 19:51:12 LOG5 begin_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2012-Oct-30 19:51:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 19:51:12 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 19:51:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:51:12 LOG3 vw_send: To DATATAKING: pnt tr 230138.000000 153215.000000 -CJ 2012-Oct-30 19:51:12 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 19:51:12 LOG5 finish_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2012-Oct-30 19:51:12 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 19:51:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:51:12 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 19:51:12 LOG5 end_task: Level: (2) ID = <10061> Status = 0 0 0 0 ok 2012-Oct-30 19:51:12 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 19:51:12 LOG5 begin_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2012-Oct-30 19:51:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 19:51:12 LOG3 waittrk: Start waittrk 5 2012-Oct-30 19:51:12 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 19:51:12 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2012-Oct-30 19:51:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 19:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:51:12 LOG4 got_cormsg: From DATATAKING: pnt tr 230138.000000 153215.000000 -CJ 2012-Oct-30 19:51:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:51:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20121030.a2048.0001.fits 2012-Oct-30 19:51:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20121030.a2048.0001.fits} 2012-Oct-30 19:51:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 19:51:17 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2012-Oct-30 19:51:17 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 19:51:17 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Oct-30 19:51:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 19:51:19 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Oct-30 19:51:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:51:20 INFO2 waittrk: Now tracking FRELLED156 2012-Oct-30 19:51:20 LOG4 waittrk: Current telescope position: Az = 278.31 ZA = 14.40 2012-Oct-30 19:51:20 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 19:51:20 LOG5 finish_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2012-Oct-30 19:51:20 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 19:51:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:51:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 19:51:20 LOG5 end_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2012-Oct-30 19:51:20 LOG5 antvel: Calling 'antvel 230138.000000 153215.000000 J Heliocentric 0' 2012-Oct-30 19:51:20 LOG2 antvel: Precessing RA = 23:01:38.0 Dec = +15:32:15.0 Epoch = 2012.83457 J 2012-Oct-30 19:51:20 LOG2 antvel: Computed apparent RA = 23:02:17.9 Dec = +15:36:40.8 2012-Oct-30 19:51:20 LOG2 antvel: Parameters to Doppler: Heliocentric 85879 2012 304 0.0 2012-Oct-30 19:51:20 INFO5 antvel: Computed antenna velocity: +20.06961 km/s 2012-Oct-30 19:51:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=7854.000000 veltype=velocity(optical) calctype=SUBBAND antvel=20.069612155800002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Oct-30 19:51:20 INFO4 dopset_gen: New sky frequencies: 1384.051126 1384.051126 1384.051126 1384.051126 1384.051126 1384.051126 1384.051126 1384.051126 1384.051126 2012-Oct-30 19:51:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.051126 sky0=1384.051126 sky1=1384.051126 sky2=1384.051126 sky3=1384.051126 sky4=1384.051126 sky5=1384.051126 sky6=1384.051126 sky7=1384.051126 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2012-Oct-30 19:51:20 LOG2 dopset_gen: Result from 'sky2syn': 11384.051126 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2012-Oct-30 19:51:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11384051126.0} 2012-Oct-30 19:51:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 19:51:20 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 19:51:20 LOG5 begin_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2012-Oct-30 19:51:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Oct-30 19:51:20 INFO2 adjust_power: Starting to adjust WAPP power 2012-Oct-30 19:51:20 LOG3 vw_send: To DATATAKING: adjpwrif1 2012-Oct-30 19:51:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2012-Oct-30 19:51:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:51:20 START begin_task: Starting task 'waiting on adjpwrif1' 2012-Oct-30 19:51:20 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11384051126.0} 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:51:21 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2012-Oct-30 19:51:21 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Oct-30 19:51:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2012-Oct-30 19:51:21 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Oct-30 19:51:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Oct-30 19:51:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:51:21 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Oct-30 19:51:21 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 19:51:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Oct-30 19:51:21 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2012-Oct-30 19:51:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Oct-30 19:51:21 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 19:51:21 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Oct-30 19:51:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Oct-30 19:51:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2012-Oct-30 19:51:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2012-Oct-30 19:51:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2012-Oct-30 19:51:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2012-Oct-30 19:51:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Oct-30 19:51:21 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Oct-30 19:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 19:51:22 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 11 14 dB 2012-Oct-30 19:51:22 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 8 11 dB 2012-Oct-30 19:51:22 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2012-Oct-30 19:51:22 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2012-Oct-30 19:51:22 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2012-Oct-30 19:51:22 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2012-Oct-30 19:51:22 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 11 dB 2012-Oct-30 19:51:22 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 14 dB 2012-Oct-30 19:51:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Oct-30 19:51:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Oct-30 19:51:22 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Oct-30 19:51:22 INFO2 wapp_adjpwr: WAPP power: 1.083 0.992 1.013 1.108 2012-Oct-30 19:51:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 19:51:22 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Oct-30 19:51:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Oct-30 19:51:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:51:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 19:51:22 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Oct-30 19:51:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 19:51:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 19:51:22 LOG5 finish_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2012-Oct-30 19:51:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Oct-30 19:51:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:51:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 19:51:22 LOG5 end_task: Level: (2) ID = <10065> Status = 0 0 0 0 ok 2012-Oct-30 19:51:22 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2012-Oct-30 19:51:22 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 19:51:22 LOG5 begin_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2012-Oct-30 19:51:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2012-Oct-30 19:51:22 INFO2 take_data: Starting WAPP 300-second scan: 230400228 2012-Oct-30 19:51:23 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 19:51:23 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Oct-30 19:51:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 19:51:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2012-Oct-30 19:51:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85884.00 2012-Oct-30 19:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11384.051126 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 19:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:51:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86140806 != 86140805 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86035992 != 86035991 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85773410 != 85773409 diff = 1)! 2012-Oct-30 19:51:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86967403 != 86967404 diff = 1)! 2012-Oct-30 19:51:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86967403 != 86967404 diff = 1)! 2012-Oct-30 19:51:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85843266 != 85843265 diff = 1)! 2012-Oct-30 19:51:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85843266 != 85843265 diff = 1)! 2012-Oct-30 19:51:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85843266 != 85843265 diff = 1)! 2012-Oct-30 19:51:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85843266 != 85843265 diff = 1)! 2012-Oct-30 19:51:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85843266 != 85843265 diff = 1)! 2012-Oct-30 19:51:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85843266 != 85843265 diff = 1)! 2012-Oct-30 19:51:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:51:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:51:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:51:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804422 != 85804421 diff = 1)! 2012-Oct-30 19:52:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764298 != 85764297 diff = 1)! 2012-Oct-30 19:52:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764298 != 85764297 diff = 1)! 2012-Oct-30 19:52:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764298 != 85764297 diff = 1)! 2012-Oct-30 19:52:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764298 != 85764297 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804434 != 85804433 diff = 1)! 2012-Oct-30 19:52:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85766990 != 85766989 diff = 1)! 2012-Oct-30 19:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85790984 != 85790983 diff = 1)! 2012-Oct-30 19:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790984 != 85790983 diff = 1)! 2012-Oct-30 19:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85790984 != 85790983 diff = 1)! 2012-Oct-30 19:52:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85790984 != 85790983 diff = 1)! 2012-Oct-30 19:53:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764334 != 85764333 diff = 1)! 2012-Oct-30 19:53:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764334 != 85764333 diff = 1)! 2012-Oct-30 19:53:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764334 != 85764333 diff = 1)! 2012-Oct-30 19:53:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85803165 != 85803166 diff = 1)! 2012-Oct-30 19:53:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85803165 != 85803166 diff = 1)! 2012-Oct-30 19:53:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764348 != 85764347 diff = 1)! 2012-Oct-30 19:53:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764348 != 85764347 diff = 1)! 2012-Oct-30 19:53:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764348 != 85764347 diff = 1)! 2012-Oct-30 19:53:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764348 != 85764347 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86005006 != 86005005 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85784253 != 85784254 diff = 1)! 2012-Oct-30 19:53:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86335739 != 86335740 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764321 != 85764322 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:53:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85769663 != 85769664 diff = 1)! 2012-Oct-30 19:54:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783422 != 85783421 diff = 1)! 2012-Oct-30 19:54:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85783422 != 85783421 diff = 1)! 2012-Oct-30 19:54:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783422 != 85783421 diff = 1)! 2012-Oct-30 19:54:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85783422 != 85783421 diff = 1)! 2012-Oct-30 19:54:01 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783422 != 85783421 diff = 1)! 2012-Oct-30 19:54:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:54:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:54:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804394 != 85804393 diff = 1)! 2012-Oct-30 19:54:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:54:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:54:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764324 != 85764323 diff = 1)! 2012-Oct-30 19:54:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86016152 != 86016151 diff = 1)! 2012-Oct-30 19:54:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85771743 != 85771744 diff = 1)! 2012-Oct-30 19:54:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85771743 != 85771744 diff = 1)! 2012-Oct-30 19:54:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85771743 != 85771744 diff = 1)! 2012-Oct-30 19:54:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85771743 != 85771744 diff = 1)! 2012-Oct-30 19:54:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85771743 != 85771744 diff = 1)! 2012-Oct-30 19:54:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804430 != 85804429 diff = 1)! 2012-Oct-30 19:54:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804430 != 85804429 diff = 1)! 2012-Oct-30 19:54:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804430 != 85804429 diff = 1)! 2012-Oct-30 19:54:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804430 != 85804429 diff = 1)! 2012-Oct-30 19:54:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804430 != 85804429 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85789712 != 85789711 diff = 1)! 2012-Oct-30 19:54:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804382 != 85804381 diff = 1)! 2012-Oct-30 19:54:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804382 != 85804381 diff = 1)! 2012-Oct-30 19:54:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804382 != 85804381 diff = 1)! 2012-Oct-30 19:54:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804382 != 85804381 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:54:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85964860 != 85964859 diff = 1)! 2012-Oct-30 19:55:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85769113 != 85769114 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85803548 != 85803547 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804429 != 85804430 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804429 != 85804430 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804429 != 85804428 diff = 1)! 2012-Oct-30 19:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85799634 != 85799633 diff = 1)! 2012-Oct-30 19:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85799634 != 85799633 diff = 1)! 2012-Oct-30 19:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85799634 != 85799633 diff = 1)! 2012-Oct-30 19:55:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85799634 != 85799633 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:55:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86733743 != 86733744 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85883511 != 85883510 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85883511 != 85883510 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85883511 != 85883510 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85883511 != 85883512 diff = 1)! 2012-Oct-30 19:56:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804432 != 85804431 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85774726 != 85774725 diff = 1)! 2012-Oct-30 19:56:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 19:56:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 19:56:24 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Oct-30 19:56:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 19:56:24 LOG5 end_task: Level: (2) ID = <10070> Status = 0 0 0 0 ok 2012-Oct-30 19:56:24 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2012-Oct-30 19:56:24 LOG2 onoff_wapp: Parameters: RA-offset: -90.95729999999925 arcminutes wait: 60 secs 2012-Oct-30 19:56:24 LOG4 track_offsets: Calling 'track_offsets -90.95729999999925 0.0 main small' 2012-Oct-30 19:56:24 START begin_task: Starting task 'sending telescope offsets' 2012-Oct-30 19:56:24 LOG5 begin_task: Level: (2) ID = <10072> Status = 0 0 0 0 ok 2012-Oct-30 19:56:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2012-Oct-30 19:56:24 INFO2 track_offsets: Starting to send new offsets 2012-Oct-30 19:56:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:56:24 LOG3 vw_send: To DATATAKING: pnt tr 230138.000000 153215.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 19:56:24 STOP finish_task: Finishing task 'sending telescope offsets' 2012-Oct-30 19:56:24 LOG5 finish_task: Level: (2) ID = <10072> Status = 0 0 0 0 ok 2012-Oct-30 19:56:24 INFO2 finish_task: DONE finished sending: telescope offsets 2012-Oct-30 19:56:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 19:56:24 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2012-Oct-30 19:56:24 LOG5 end_task: Level: (2) ID = <10072> Status = 0 0 0 0 ok 2012-Oct-30 19:56:25 INFO2 lstwait: Waiting for 59.8 secs from LST 22:08:10 to LST 22:09:10 ... 2012-Oct-30 19:56:25 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Oct-30 19:56:25 START begin_task: Starting task 'waiting on wait on LST' 2012-Oct-30 19:56:25 LOG5 begin_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2012-Oct-30 19:56:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 19:56:25 LOG4 got_cormsg: From DATATAKING: pnt tr 230138.000000 153215.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 19:56:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 19:57:04 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'FRELLED156' (after 39 seconds) 2012-Oct-30 19:57:04 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 21 seconds to spare (39 < 60 seconds) 2012-Oct-30 19:57:24 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Oct-30 19:57:25 LOG5 end_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2012-Oct-30 19:57:25 LOG4 lstwait: Finished waiting 0.17 seconds late 2012-Oct-30 19:57:25 INFO3 lstwait: Finished waiting 2012-Oct-30 19:57:25 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Oct-30 19:57:25 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2012-Oct-30 19:57:25 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 19:57:25 LOG5 begin_task: Level: (2) ID = <10074> Status = 0 0 0 0 ok 2012-Oct-30 19:57:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2012-Oct-30 19:57:25 INFO2 take_data: Starting WAPP 300-second scan: 230400229 2012-Oct-30 19:57:25 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 19:57:25 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Oct-30 19:57:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 19:57:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2012-Oct-30 19:57:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86246.00 2012-Oct-30 19:57:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11384.051126 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 19:57:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:57:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:57:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:57:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 19:57:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804384 != 85804383 diff = 1)! 2012-Oct-30 19:57:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804384 != 85804383 diff = 1)! 2012-Oct-30 19:57:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804384 != 85804383 diff = 1)! 2012-Oct-30 19:57:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85776517 != 85776518 diff = 1)! 2012-Oct-30 19:57:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804410 != 85804409 diff = 1)! 2012-Oct-30 19:58:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764326 != 85764325 diff = 1)! 2012-Oct-30 19:58:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764302 != 85764301 diff = 1)! 2012-Oct-30 19:58:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804386 != 85804385 diff = 1)! 2012-Oct-30 19:58:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804386 != 85804385 diff = 1)! 2012-Oct-30 19:58:08 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:58:08.298 (seconds: 71888.298)!} 2012-Oct-30 19:58:08 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:58:08.298 (seconds: 71888.298)! 2012-Oct-30 19:58:09 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 71887.0 to 71888.0! 2012-Oct-30 19:58:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964870 != 85964869 diff = 1)! 2012-Oct-30 19:58:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85964870 != 85964869 diff = 1)! 2012-Oct-30 19:58:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964870 != 85964869 diff = 1)! 2012-Oct-30 19:58:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85964870 != 85964869 diff = 1)! 2012-Oct-30 19:58:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85964870 != 85964869 diff = 1)! 2012-Oct-30 19:58:10 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (71887.0 - 71889.0)! 2012-Oct-30 19:58:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85778082 != 85778081 diff = 1)! 2012-Oct-30 19:58:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778082 != 85778081 diff = 1)! 2012-Oct-30 19:58:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86085179 != 86085180 diff = 1)! 2012-Oct-30 19:58:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86085179 != 86085180 diff = 1)! 2012-Oct-30 19:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804428 != 85804427 diff = 1)! 2012-Oct-30 19:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804428 != 85804427 diff = 1)! 2012-Oct-30 19:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804428 != 85804427 diff = 1)! 2012-Oct-30 19:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804428 != 85804427 diff = 1)! 2012-Oct-30 19:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804428 != 85804427 diff = 1)! 2012-Oct-30 19:58:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804428 != 85804427 diff = 1)! 2012-Oct-30 19:58:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764326 != 85764325 diff = 1)! 2012-Oct-30 19:58:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764326 != 85764325 diff = 1)! 2012-Oct-30 19:58:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764326 != 85764325 diff = 1)! 2012-Oct-30 19:58:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764326 != 85764325 diff = 1)! 2012-Oct-30 19:58:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804420 != 85804419 diff = 1)! 2012-Oct-30 19:58:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804420 != 85804419 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85802983 != 85802984 diff = 1)! 2012-Oct-30 19:59:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85795928 != 85795927 diff = 1)! 2012-Oct-30 19:59:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85795928 != 85795927 diff = 1)! 2012-Oct-30 19:59:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85795928 != 85795927 diff = 1)! 2012-Oct-30 19:59:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85795928 != 85795927 diff = 1)! 2012-Oct-30 19:59:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 19:59:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764344 != 85764343 diff = 1)! 2012-Oct-30 19:59:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764344 != 85764343 diff = 1)! 2012-Oct-30 19:59:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764344 != 85764343 diff = 1)! 2012-Oct-30 19:59:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764344 != 85764343 diff = 1)! 2012-Oct-30 19:59:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764288 != 85764287 diff = 1)! 2012-Oct-30 19:59:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764288 != 85764287 diff = 1)! 2012-Oct-30 19:59:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764288 != 85764287 diff = 1)! 2012-Oct-30 19:59:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:00:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789132 != 85789131 diff = 1)! 2012-Oct-30 20:00:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764306 != 85764305 diff = 1)! 2012-Oct-30 20:00:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764306 != 85764305 diff = 1)! 2012-Oct-30 20:00:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764306 != 85764305 diff = 1)! 2012-Oct-30 20:00:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764306 != 85764305 diff = 1)! 2012-Oct-30 20:00:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85786101 != 85786102 diff = 1)! 2012-Oct-30 20:00:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85786101 != 85786102 diff = 1)! 2012-Oct-30 20:00:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85786101 != 85786102 diff = 1)! 2012-Oct-30 20:00:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764356 != 85764355 diff = 1)! 2012-Oct-30 20:01:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804416 != 85804415 diff = 1)! 2012-Oct-30 20:01:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804416 != 85804415 diff = 1)! 2012-Oct-30 20:01:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804416 != 85804415 diff = 1)! 2012-Oct-30 20:01:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804416 != 85804415 diff = 1)! 2012-Oct-30 20:01:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804416 != 85804415 diff = 1)! 2012-Oct-30 20:01:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:01:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:01:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:01:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:01:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:01:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:01:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788716 != 85788715 diff = 1)! 2012-Oct-30 20:01:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85780047 != 85780048 diff = 1)! 2012-Oct-30 20:01:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85780047 != 85780048 diff = 1)! 2012-Oct-30 20:01:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85780047 != 85780048 diff = 1)! 2012-Oct-30 20:01:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85780047 != 85780048 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764331 != 85764330 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764331 != 85764332 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764331 != 85764332 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764331 != 85764332 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764331 != 85764332 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764331 != 85764330 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764331 != 85764330 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764331 != 85764330 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764331 != 85764330 diff = 1)! 2012-Oct-30 20:01:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764331 != 85764330 diff = 1)! 2012-Oct-30 20:01:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804416 != 85804417 diff = 1)! 2012-Oct-30 20:01:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804416 != 85804417 diff = 1)! 2012-Oct-30 20:01:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804416 != 85804417 diff = 1)! 2012-Oct-30 20:01:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804416 != 85804417 diff = 1)! 2012-Oct-30 20:01:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804416 != 85804417 diff = 1)! 2012-Oct-30 20:01:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804416 != 85804417 diff = 1)! 2012-Oct-30 20:01:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:01:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:01:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:01:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:01:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:01:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:02:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:02:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:02:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:02:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764327 != 85764328 diff = 1)! 2012-Oct-30 20:02:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764327 != 85764328 diff = 1)! 2012-Oct-30 20:02:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764327 != 85764328 diff = 1)! 2012-Oct-30 20:02:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804442 != 85804440 diff = 2)! 2012-Oct-30 20:02:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804442 != 85804441 diff = 1)! 2012-Oct-30 20:02:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804382 != 85804381 diff = 1)! 2012-Oct-30 20:02:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:02:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:02:26 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Oct-30 20:02:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:02:26 LOG5 end_task: Level: (2) ID = <10074> Status = 0 0 0 0 ok 2012-Oct-30 20:02:26 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2012-Oct-30 20:02:26 START begin_task: Starting task 'WAPP calibration' 2012-Oct-30 20:02:26 LOG5 begin_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2012-Oct-30 20:02:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2012-Oct-30 20:02:26 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:02:26 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Oct-30 20:02:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:02:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:02:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:02:26 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:02:26 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Oct-30 20:02:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:02:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:02:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:02:27 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:02:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:02:27 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Oct-30 20:02:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:02:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:02:27 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Oct-30 20:02:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Oct-30 20:02:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Oct-30 20:02:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Oct-30 20:02:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:02:27 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Oct-30 20:02:27 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:02:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:02:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Oct-30 20:02:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:02:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:02:27 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Oct-30 20:02:27 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Oct-30 20:02:27 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:02:27 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Oct-30 20:02:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Oct-30 20:02:27 INFO2 take_data: Starting WAPP 10-second scan: 230400230 2012-Oct-30 20:02:28 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:02:28 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Oct-30 20:02:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:02:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Oct-30 20:02:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 149.00 2012-Oct-30 20:02:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11384.051126 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:02:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:02:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:02:39 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Oct-30 20:02:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:02:39 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Oct-30 20:02:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Oct-30 20:02:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Oct-30 20:02:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Oct-30 20:02:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:02:39 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (857870071 != 857870070 diff = 1)! 2012-Oct-30 20:02:40 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:02:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 20:02:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:02:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:02:40 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2012-Oct-30 20:02:40 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Oct-30 20:02:40 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:02:40 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Oct-30 20:02:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Oct-30 20:02:40 INFO2 take_data: Starting WAPP 10-second scan: 230400231 2012-Oct-30 20:02:40 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:02:40 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Oct-30 20:02:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:02:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Oct-30 20:02:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 161.00 2012-Oct-30 20:02:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11384.051126 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:02:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.051126 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:02:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Oct-30 20:02:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:02:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:02:51 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Oct-30 20:02:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:02:51 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Oct-30 20:02:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:02:51 STOP finish_task: Finishing task 'WAPP calibration' 2012-Oct-30 20:02:51 LOG5 finish_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2012-Oct-30 20:02:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2012-Oct-30 20:02:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:02:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2012-Oct-30 20:02:51 LOG5 end_task: Level: (2) ID = <10076> Status = 0 0 0 0 ok 2012-Oct-30 20:02:51 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:02:51 LOG5 begin_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2012-Oct-30 20:02:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:02:51 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:02:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 20:02:51 LOG3 vw_send: To DATATAKING: pnt tr 230138.000000 153215.000000 -CJ 2012-Oct-30 20:02:52 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:02:52 LOG5 finish_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2012-Oct-30 20:02:52 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:02:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:02:52 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:02:52 LOG5 end_task: Level: (2) ID = <10085> Status = 0 0 0 0 ok 2012-Oct-30 20:02:52 STOP finish_task: Finishing task 'standard on/off' 2012-Oct-30 20:02:52 LOG5 finish_task: Level: (1) ID = <10055> Status = 0 0 0 0 ok 2012-Oct-30 20:02:52 DONE finish_task: DONE finished pattern: standard on/off 2012-Oct-30 20:02:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:02:52 END end_task: Finishing task 'standard on/off' with status 'OK' 2012-Oct-30 20:02:52 LOG5 end_task: Level: (1) ID = <10055> Status = 0 0 0 0 ok 2012-Oct-30 20:02:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED156" 2012-Oct-30 20:02:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (857843893 != 857843894 diff = 1)! 2012-Oct-30 20:02:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (857843893 != 857843894 diff = 1)! 2012-Oct-30 20:02:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (857843893 != 857843894 diff = 1)! 2012-Oct-30 20:02:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (857843893 != 857843894 diff = 1)! 2012-Oct-30 20:02:52 LOG4 got_cormsg: From DATATAKING: pnt tr 230138.000000 153215.000000 -CJ 2012-Oct-30 20:02:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:02:55 COMMAND CIMA-send_to_exec: Sending command to point to a source 2012-Oct-30 20:02:55 LOG4 exec_msg: From OBSERVER: track_new_source FRELLED147 230430 +175622 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 5579 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2012-Oct-30 20:02:56 LOG1 track_new_source: Calling 'track_new_source FRELLED147 230430 +175622 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 5579 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2012-Oct-30 20:02:56 BEGIN begin_task: Starting task 'selecting new source' 2012-Oct-30 20:02:56 LOG5 begin_task: Level: (1) ID = <10086> Status = 0 0 0 0 ok 2012-Oct-30 20:02:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED147} INFO {Selecting source 'FRELLED147' ...} 2012-Oct-30 20:02:56 LOG3 track_source: Calling 'track_source FRELLED147 230430 +175622 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 5579 Heliocentric velocity(optical)' 2012-Oct-30 20:02:56 START begin_task: Starting task 'sending tracking commands' 2012-Oct-30 20:02:56 LOG5 begin_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2012-Oct-30 20:02:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {FRELLED147} INFO {Slewing to source 'FRELLED147' ...} 2012-Oct-30 20:02:56 INFO1 track_source: Starting to track FRELLED147 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: set ra 230430 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: set dec +175622 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: pnt tr 230430 +175622 -CJ 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: dopsetvel 5579 hel 2012-Oct-30 20:02:56 STOP finish_task: Finishing task 'sending tracking commands' 2012-Oct-30 20:02:56 LOG5 finish_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2012-Oct-30 20:02:56 INFO2 finish_task: DONE finished sending: tracking commands 2012-Oct-30 20:02:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:02:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Oct-30 20:02:56 LOG5 end_task: Level: (2) ID = <10087> Status = 0 0 0 0 ok 2012-Oct-30 20:02:56 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2012-Oct-30 20:02:56 START begin_task: Starting task 'applying pointing corrections' 2012-Oct-30 20:02:56 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2012-Oct-30 20:02:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2012-Oct-30 20:02:56 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 20:02:56 STOP finish_task: Finishing task 'applying pointing corrections' 2012-Oct-30 20:02:56 LOG5 finish_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2012-Oct-30 20:02:56 INFO2 finish_task: DONE finished applying: pointing corrections 2012-Oct-30 20:02:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:02:56 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2012-Oct-30 20:02:56 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2012-Oct-30 20:02:57 STOP finish_task: Finishing task 'selecting new source' 2012-Oct-30 20:02:57 LOG5 finish_task: Level: (1) ID = <10086> Status = 0 0 0 0 ok 2012-Oct-30 20:02:57 DONE finish_task: DONE finished selecting: new source 2012-Oct-30 20:02:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:02:57 END end_task: Finishing task 'selecting new source' with status 'OK' 2012-Oct-30 20:02:57 LOG5 end_task: Level: (1) ID = <10086> Status = 0 0 0 0 ok 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: set ra 230430 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 230430 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: set dec +175622 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: +175622 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: pnt tr 230430 +175622 -CJ 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 5579 hel 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 20:02:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:02:58 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2012-Oct-30 20:02:58 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2012-Oct-30 20:02:58 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2012-Oct-30 20:02:58 BEGIN begin_task: Starting task 'standard on/off' 2012-Oct-30 20:02:58 LOG5 begin_task: Level: (1) ID = <10089> Status = 0 0 0 0 ok 2012-Oct-30 20:02:58 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'FRELLED147' 2012-Oct-30 20:02:58 INFO1 onoff_wapp: Starting pattern: Standard on/off 2012-Oct-30 20:02:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2012-Oct-30 20:02:58 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 20:02:58 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Oct-30 20:02:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 20:02:58 LOG3 waittrk: Start waittrk 5 2012-Oct-30 20:02:58 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 20:02:58 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Oct-30 20:03:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 20:03:03 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Oct-30 20:03:03 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 20:03:03 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 20:03:40 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:03:40 INFO2 waittrk: Now tracking FRELLED147 2012-Oct-30 20:03:40 LOG4 waittrk: Current telescope position: Az = 269.25 ZA = 11.79 2012-Oct-30 20:03:40 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 20:03:40 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 20:03:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:03:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 20:03:40 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:03:40 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:03:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:03:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:03:40 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:03:40 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:03:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:03:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:40 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:03:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:03:40 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:03:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:03:40 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Oct-30 20:03:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 20:03:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 20:03:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 20:03:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 20:03:41 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2012-Oct-30 20:03:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2012-Oct-30 20:03:41 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:03:41 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2012-Oct-30 20:03:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:03:41 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:03:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:03:41 LOG3 vw_send: To DATATAKING: pnt tr 230430.000000 175622.000000 -CJ 2012-Oct-30 20:03:41 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:03:41 LOG5 finish_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2012-Oct-30 20:03:41 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:03:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:03:41 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:03:41 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2012-Oct-30 20:03:41 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 20:03:41 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2012-Oct-30 20:03:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 20:03:41 LOG3 waittrk: Start waittrk 5 2012-Oct-30 20:03:41 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 20:03:41 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Oct-30 20:03:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 20:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:03:41 LOG4 got_cormsg: From DATATAKING: pnt tr 230430.000000 175622.000000 -CJ 2012-Oct-30 20:03:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:03:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20121030.a2048.0002.fits 2012-Oct-30 20:03:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20121030.a2048.0002.fits} 2012-Oct-30 20:03:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 20:03:46 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Oct-30 20:03:46 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 20:03:46 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2012-Oct-30 20:03:48 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 20:03:48 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2012-Oct-30 20:03:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:03:49 INFO2 waittrk: Now tracking FRELLED147 2012-Oct-30 20:03:49 LOG4 waittrk: Current telescope position: Az = 269.26 ZA = 11.76 2012-Oct-30 20:03:49 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 20:03:49 LOG5 finish_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2012-Oct-30 20:03:49 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 20:03:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:03:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 20:03:49 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2012-Oct-30 20:03:49 LOG5 antvel: Calling 'antvel 230430.000000 175622.000000 J Heliocentric 0' 2012-Oct-30 20:03:49 LOG2 antvel: Precessing RA = 23:04:30.0 Dec = +17:56:22.0 Epoch = 2012.83460 J 2012-Oct-30 20:03:49 LOG2 antvel: Computed apparent RA = 23:05:09.8 Dec = +18:00:49.0 2012-Oct-30 20:03:49 LOG2 antvel: Parameters to Doppler: Heliocentric 86628 2012 304 0.0 2012-Oct-30 20:03:49 INFO5 antvel: Computed antenna velocity: +19.23982 km/s 2012-Oct-30 20:03:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=5579.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.2398159187 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Oct-30 20:03:49 INFO4 dopset_gen: New sky frequencies: 1394.366087 1394.366087 1394.366087 1394.366087 1394.366087 1394.366087 1394.366087 1394.366087 1394.366087 2012-Oct-30 20:03:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1394.366087 sky0=1394.366087 sky1=1394.366087 sky2=1394.366087 sky3=1394.366087 sky4=1394.366087 sky5=1394.366087 sky6=1394.366087 sky7=1394.366087 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2012-Oct-30 20:03:49 LOG2 dopset_gen: Result from 'sky2syn': 11394.366087 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2012-Oct-30 20:03:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11394366087.0} 2012-Oct-30 20:03:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 20:03:49 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 20:03:49 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2012-Oct-30 20:03:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Oct-30 20:03:49 INFO2 adjust_power: Starting to adjust WAPP power 2012-Oct-30 20:03:49 LOG3 vw_send: To DATATAKING: adjpwrif1 2012-Oct-30 20:03:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2012-Oct-30 20:03:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:03:49 START begin_task: Starting task 'waiting on adjpwrif1' 2012-Oct-30 20:03:49 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2012-Oct-30 20:03:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11394366087.0} 2012-Oct-30 20:03:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 20:03:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:49 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2012-Oct-30 20:03:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:03:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:03:50 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2012-Oct-30 20:03:50 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2012-Oct-30 20:03:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2012-Oct-30 20:03:50 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Oct-30 20:03:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Oct-30 20:03:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:03:50 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Oct-30 20:03:50 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:03:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Oct-30 20:03:50 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Oct-30 20:03:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Oct-30 20:03:50 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 20:03:50 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Oct-30 20:03:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Oct-30 20:03:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2012-Oct-30 20:03:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2012-Oct-30 20:03:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2012-Oct-30 20:03:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2012-Oct-30 20:03:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Oct-30 20:03:50 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2012-Oct-30 20:03:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:03:51 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 11 14 dB 2012-Oct-30 20:03:51 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 8 10 dB 2012-Oct-30 20:03:51 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 14 11 dB 2012-Oct-30 20:03:51 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2012-Oct-30 20:03:51 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2012-Oct-30 20:03:51 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2012-Oct-30 20:03:51 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2012-Oct-30 20:03:51 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 14 dB 2012-Oct-30 20:03:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Oct-30 20:03:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Oct-30 20:03:51 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2012-Oct-30 20:03:51 INFO2 wapp_adjpwr: WAPP power: 1.000 1.136 0.915 1.001 2012-Oct-30 20:03:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 20:03:51 LOG5 finish_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Oct-30 20:03:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Oct-30 20:03:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:03:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 20:03:51 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Oct-30 20:03:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:03:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 20:03:51 LOG5 finish_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2012-Oct-30 20:03:51 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Oct-30 20:03:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:03:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 20:03:51 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2012-Oct-30 20:03:51 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2012-Oct-30 20:03:51 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:03:51 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2012-Oct-30 20:03:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2012-Oct-30 20:03:51 INFO2 take_data: Starting WAPP 300-second scan: 230400232 2012-Oct-30 20:03:52 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:03:52 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Oct-30 20:03:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:03:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2012-Oct-30 20:03:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 233.00 2012-Oct-30 20:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11394.366087 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:03:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:03:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (95669124 != 95669123 diff = 1)! 2012-Oct-30 20:03:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (95669124 != 95669123 diff = 1)! 2012-Oct-30 20:03:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (95669124 != 95669123 diff = 1)! 2012-Oct-30 20:03:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (95669124 != 95669123 diff = 1)! 2012-Oct-30 20:04:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (95788082 != 95788083 diff = 1)! 2012-Oct-30 20:04:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (95788082 != 95788083 diff = 1)! 2012-Oct-30 20:04:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (95788082 != 95788083 diff = 1)! 2012-Oct-30 20:04:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86364551 != 86364552 diff = 1)! 2012-Oct-30 20:04:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86364551 != 86364552 diff = 1)! 2012-Oct-30 20:04:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86364551 != 86364552 diff = 1)! 2012-Oct-30 20:04:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86364551 != 86364552 diff = 1)! 2012-Oct-30 20:04:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (95106354 != 95106353 diff = 1)! 2012-Oct-30 20:04:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999965 diff = 1)! 2012-Oct-30 20:04:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999965 diff = 1)! 2012-Oct-30 20:04:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999965 diff = 1)! 2012-Oct-30 20:04:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999965 diff = 1)! 2012-Oct-30 20:04:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999965 diff = 1)! 2012-Oct-30 20:04:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999965 diff = 1)! 2012-Oct-30 20:04:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85884688 != 85884687 diff = 1)! 2012-Oct-30 20:04:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85884688 != 85884687 diff = 1)! 2012-Oct-30 20:04:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85884688 != 85884687 diff = 1)! 2012-Oct-30 20:04:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85884688 != 85884687 diff = 1)! 2012-Oct-30 20:04:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (88037017 != 88037018 diff = 1)! 2012-Oct-30 20:04:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (88037017 != 88037018 diff = 1)! 2012-Oct-30 20:04:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (87808147 != 87808148 diff = 1)! 2012-Oct-30 20:04:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (87808147 != 87808148 diff = 1)! 2012-Oct-30 20:04:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (87808147 != 87808148 diff = 1)! 2012-Oct-30 20:04:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (88964628 != 88964627 diff = 1)! 2012-Oct-30 20:04:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (88964628 != 88964627 diff = 1)! 2012-Oct-30 20:04:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86205487 != 86205488 diff = 1)! 2012-Oct-30 20:04:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85923473 != 85923474 diff = 1)! 2012-Oct-30 20:04:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85923473 != 85923474 diff = 1)! 2012-Oct-30 20:04:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85923473 != 85923474 diff = 1)! 2012-Oct-30 20:04:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85923473 != 85923474 diff = 1)! 2012-Oct-30 20:04:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (90857056 != 90857055 diff = 1)! 2012-Oct-30 20:04:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (90857056 != 90857055 diff = 1)! 2012-Oct-30 20:04:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (90857056 != 90857055 diff = 1)! 2012-Oct-30 20:04:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (90857056 != 90857055 diff = 1)! 2012-Oct-30 20:05:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86044964 != 86044963 diff = 1)! 2012-Oct-30 20:05:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86044964 != 86044963 diff = 1)! 2012-Oct-30 20:05:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (87206644 != 87206643 diff = 1)! 2012-Oct-30 20:05:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86080649 != 86080648 diff = 1)! 2012-Oct-30 20:05:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86080649 != 86080650 diff = 1)! 2012-Oct-30 20:05:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86080649 != 86080648 diff = 1)! 2012-Oct-30 20:05:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86080649 != 86080648 diff = 1)! 2012-Oct-30 20:05:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86080649 != 86080648 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:05:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86217306 != 86217307 diff = 1)! 2012-Oct-30 20:05:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86217306 != 86217307 diff = 1)! 2012-Oct-30 20:05:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86217306 != 86217307 diff = 1)! 2012-Oct-30 20:05:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86217306 != 86217307 diff = 1)! 2012-Oct-30 20:05:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86217306 != 86217307 diff = 1)! 2012-Oct-30 20:05:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86045301 != 86045302 diff = 1)! 2012-Oct-30 20:05:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86045301 != 86045302 diff = 1)! 2012-Oct-30 20:06:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85964868 != 85964867 diff = 1)! 2012-Oct-30 20:06:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964868 != 85964867 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86123850 != 86123849 diff = 1)! 2012-Oct-30 20:06:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86486192 != 86486191 diff = 1)! 2012-Oct-30 20:06:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86005010 != 86005009 diff = 1)! 2012-Oct-30 20:06:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86042560 != 86042559 diff = 1)! 2012-Oct-30 20:06:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86042560 != 86042559 diff = 1)! 2012-Oct-30 20:06:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86042560 != 86042559 diff = 1)! 2012-Oct-30 20:06:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86042560 != 86042559 diff = 1)! 2012-Oct-30 20:06:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86042560 != 86042559 diff = 1)! 2012-Oct-30 20:06:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85922498 != 85922497 diff = 1)! 2012-Oct-30 20:06:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85922498 != 85922497 diff = 1)! 2012-Oct-30 20:06:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85922498 != 85922497 diff = 1)! 2012-Oct-30 20:06:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86085172 != 86085171 diff = 1)! 2012-Oct-30 20:06:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86085172 != 86085171 diff = 1)! 2012-Oct-30 20:06:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86085172 != 86085171 diff = 1)! 2012-Oct-30 20:06:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86085172 != 86085171 diff = 1)! 2012-Oct-30 20:06:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86085172 != 86085171 diff = 1)! 2012-Oct-30 20:06:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86085172 != 86085171 diff = 1)! 2012-Oct-30 20:06:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86565028 != 86565027 diff = 1)! 2012-Oct-30 20:06:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86263308 != 86263306 diff = 2)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:03 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85889205 != 85889206 diff = 1)! 2012-Oct-30 20:07:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764266 != 85764265 diff = 1)! 2012-Oct-30 20:07:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764266 != 85764265 diff = 1)! 2012-Oct-30 20:07:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764266 != 85764265 diff = 1)! 2012-Oct-30 20:07:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764266 != 85764265 diff = 1)! 2012-Oct-30 20:07:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:07:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85964852 != 85964851 diff = 1)! 2012-Oct-30 20:07:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85967876 != 85967875 diff = 1)! 2012-Oct-30 20:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:07:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:07:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:07:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:07:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:07:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:07:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:07:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804442 != 85804441 diff = 1)! 2012-Oct-30 20:08:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804386 != 85804385 diff = 1)! 2012-Oct-30 20:08:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85795690 != 85795689 diff = 1)! 2012-Oct-30 20:08:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804386 != 85804385 diff = 1)! 2012-Oct-30 20:08:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764304 != 85764303 diff = 1)! 2012-Oct-30 20:08:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764304 != 85764303 diff = 1)! 2012-Oct-30 20:08:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764304 != 85764303 diff = 1)! 2012-Oct-30 20:08:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764304 != 85764303 diff = 1)! 2012-Oct-30 20:08:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:08:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:08:53 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Oct-30 20:08:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:08:53 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2012-Oct-30 20:08:53 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2012-Oct-30 20:08:53 LOG2 onoff_wapp: Parameters: RA-offset: -90.95729999999925 arcminutes wait: 60 secs 2012-Oct-30 20:08:53 LOG4 track_offsets: Calling 'track_offsets -90.95729999999925 0.0 main small' 2012-Oct-30 20:08:53 START begin_task: Starting task 'sending telescope offsets' 2012-Oct-30 20:08:53 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Oct-30 20:08:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2012-Oct-30 20:08:53 INFO2 track_offsets: Starting to send new offsets 2012-Oct-30 20:08:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:08:53 LOG3 vw_send: To DATATAKING: pnt tr 230430.000000 175622.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 20:08:53 STOP finish_task: Finishing task 'sending telescope offsets' 2012-Oct-30 20:08:53 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Oct-30 20:08:53 INFO2 finish_task: DONE finished sending: telescope offsets 2012-Oct-30 20:08:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:08:53 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2012-Oct-30 20:08:54 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Oct-30 20:08:54 INFO2 lstwait: Waiting for 59.8 secs from LST 22:20:41 to LST 22:21:41 ... 2012-Oct-30 20:08:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Oct-30 20:08:54 START begin_task: Starting task 'waiting on wait on LST' 2012-Oct-30 20:08:54 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2012-Oct-30 20:08:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:08:54 LOG4 got_cormsg: From DATATAKING: pnt tr 230430.000000 175622.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 20:08:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:09:33 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'FRELLED147' (after 39 seconds) 2012-Oct-30 20:09:33 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 21 seconds to spare (39 < 60 seconds) 2012-Oct-30 20:09:54 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Oct-30 20:09:54 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2012-Oct-30 20:09:54 LOG4 lstwait: Finished waiting 0.17 seconds late 2012-Oct-30 20:09:54 INFO3 lstwait: Finished waiting 2012-Oct-30 20:09:54 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:09:54 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2012-Oct-30 20:09:54 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:09:54 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2012-Oct-30 20:09:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2012-Oct-30 20:09:54 INFO2 take_data: Starting WAPP 300-second scan: 230400233 2012-Oct-30 20:09:54 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:09:54 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Oct-30 20:09:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:09:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2012-Oct-30 20:09:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 595.00 2012-Oct-30 20:09:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11394.366087 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:09:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:09:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:09:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:09:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:09:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764348 != 85764347 diff = 1)! 2012-Oct-30 20:09:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764348 != 85764347 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:09:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:10:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85791642 != 85791641 diff = 1)! 2012-Oct-30 20:10:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85791642 != 85791641 diff = 1)! 2012-Oct-30 20:10:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85765279 != 85765280 diff = 1)! 2012-Oct-30 20:10:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85765279 != 85765280 diff = 1)! 2012-Oct-30 20:10:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85768807 != 85768808 diff = 1)! 2012-Oct-30 20:10:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85768807 != 85768808 diff = 1)! 2012-Oct-30 20:10:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85768807 != 85768808 diff = 1)! 2012-Oct-30 20:10:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85768807 != 85768808 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804424 != 85804423 diff = 1)! 2012-Oct-30 20:10:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764313 != 85764314 diff = 1)! 2012-Oct-30 20:10:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764313 != 85764314 diff = 1)! 2012-Oct-30 20:10:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764313 != 85764314 diff = 1)! 2012-Oct-30 20:10:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764313 != 85764314 diff = 1)! 2012-Oct-30 20:10:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:10:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:10:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:10:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:10:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:10:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804448 != 85804447 diff = 1)! 2012-Oct-30 20:10:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804448 != 85804447 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85783558 != 85783557 diff = 1)! 2012-Oct-30 20:10:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85798791 != 85798792 diff = 1)! 2012-Oct-30 20:10:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85798791 != 85798792 diff = 1)! 2012-Oct-30 20:10:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85798791 != 85798792 diff = 1)! 2012-Oct-30 20:10:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85798791 != 85798792 diff = 1)! 2012-Oct-30 20:11:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804386 != 85804387 diff = 1)! 2012-Oct-30 20:11:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:11:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:11:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:11:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764306 != 85764305 diff = 1)! 2012-Oct-30 20:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85794938 != 85794937 diff = 1)! 2012-Oct-30 20:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85794938 != 85794937 diff = 1)! 2012-Oct-30 20:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85794938 != 85794937 diff = 1)! 2012-Oct-30 20:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85794938 != 85794937 diff = 1)! 2012-Oct-30 20:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85794938 != 85794937 diff = 1)! 2012-Oct-30 20:11:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85794938 != 85794937 diff = 1)! 2012-Oct-30 20:12:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86403364 != 86403363 diff = 1)! 2012-Oct-30 20:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804401 != 85804402 diff = 1)! 2012-Oct-30 20:12:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804401 != 85804402 diff = 1)! 2012-Oct-30 20:12:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:12:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:12:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764289 != 85764290 diff = 1)! 2012-Oct-30 20:12:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764289 != 85764290 diff = 1)! 2012-Oct-30 20:12:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764289 != 85764290 diff = 1)! 2012-Oct-30 20:12:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764289 != 85764290 diff = 1)! 2012-Oct-30 20:12:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764289 != 85764290 diff = 1)! 2012-Oct-30 20:12:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764289 != 85764290 diff = 1)! 2012-Oct-30 20:12:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:12:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:12:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:12:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85777328 != 85777327 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:34 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85788516 != 85788515 diff = 1)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764326 != 85764325 diff = 1)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764326 != 85764324 diff = 2)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764326 != 85764324 diff = 2)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764326 != 85764325 diff = 1)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764326 != 85764325 diff = 1)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764326 != 85764325 diff = 1)! 2012-Oct-30 20:12:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764326 != 85764325 diff = 1)! 2012-Oct-30 20:12:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764315 != 85764316 diff = 1)! 2012-Oct-30 20:12:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764315 != 85764316 diff = 1)! 2012-Oct-30 20:12:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764315 != 85764316 diff = 1)! 2012-Oct-30 20:12:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764315 != 85764316 diff = 1)! 2012-Oct-30 20:12:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764315 != 85764316 diff = 1)! 2012-Oct-30 20:12:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764315 != 85764316 diff = 1)! 2012-Oct-30 20:12:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804450 != 85804449 diff = 1)! 2012-Oct-30 20:12:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804450 != 85804449 diff = 1)! 2012-Oct-30 20:12:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804450 != 85804449 diff = 1)! 2012-Oct-30 20:12:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804450 != 85804449 diff = 1)! 2012-Oct-30 20:13:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804354 != 85804353 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85767023 != 85767022 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85767023 != 85767022 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85767023 != 85767024 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85767023 != 85767024 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85767023 != 85767024 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85767023 != 85767024 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85767023 != 85767022 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85767023 != 85767022 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85767023 != 85767022 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85767023 != 85767024 diff = 1)! 2012-Oct-30 20:13:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85767023 != 85767022 diff = 1)! 2012-Oct-30 20:13:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764320 != 85764319 diff = 1)! 2012-Oct-30 20:13:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85802284 != 85802283 diff = 1)! 2012-Oct-30 20:13:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85802284 != 85802283 diff = 1)! 2012-Oct-30 20:13:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85802284 != 85802283 diff = 1)! 2012-Oct-30 20:13:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85802284 != 85802283 diff = 1)! 2012-Oct-30 20:13:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85777966 != 85777965 diff = 1)! 2012-Oct-30 20:13:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85790846 != 85790845 diff = 1)! 2012-Oct-30 20:13:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85790846 != 85790845 diff = 1)! 2012-Oct-30 20:13:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790846 != 85790845 diff = 1)! 2012-Oct-30 20:13:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85790846 != 85790845 diff = 1)! 2012-Oct-30 20:13:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85790846 != 85790845 diff = 1)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804374 != 85804372 diff = 2)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804374 != 85804372 diff = 2)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804374 != 85804372 diff = 2)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804374 != 85804372 diff = 2)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804374 != 85804372 diff = 2)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804374 != 85804373 diff = 1)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804374 != 85804372 diff = 2)! 2012-Oct-30 20:13:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804374 != 85804373 diff = 1)! 2012-Oct-30 20:13:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85800808 != 85800807 diff = 1)! 2012-Oct-30 20:14:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764324 != 85764325 diff = 1)! 2012-Oct-30 20:14:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764324 != 85764325 diff = 1)! 2012-Oct-30 20:14:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:14:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804438 != 85804437 diff = 1)! 2012-Oct-30 20:14:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804438 != 85804437 diff = 1)! 2012-Oct-30 20:14:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804383 != 85804384 diff = 1)! 2012-Oct-30 20:14:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804383 != 85804384 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85791930 != 85791929 diff = 1)! 2012-Oct-30 20:14:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804396 != 85804395 diff = 1)! 2012-Oct-30 20:14:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804396 != 85804395 diff = 1)! 2012-Oct-30 20:14:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:14:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:14:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:14:42 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804422 != 85804421 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764330 != 85764329 diff = 1)! 2012-Oct-30 20:14:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:14:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:14:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:14:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:14:55 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Oct-30 20:14:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:14:55 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2012-Oct-30 20:14:55 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2012-Oct-30 20:14:55 START begin_task: Starting task 'WAPP calibration' 2012-Oct-30 20:14:55 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2012-Oct-30 20:14:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2012-Oct-30 20:14:55 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:14:55 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Oct-30 20:14:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:14:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:14:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:14:55 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:14:55 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Oct-30 20:14:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85779396 != 85779395 diff = 1)! 2012-Oct-30 20:14:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:14:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:14:56 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:14:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:14:56 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Oct-30 20:14:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:14:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:14:56 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Oct-30 20:14:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Oct-30 20:14:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Oct-30 20:14:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Oct-30 20:14:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:14:56 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Oct-30 20:14:56 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:14:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Oct-30 20:14:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:14:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:14:56 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Oct-30 20:14:56 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Oct-30 20:14:56 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:14:56 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2012-Oct-30 20:14:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Oct-30 20:14:56 INFO2 take_data: Starting WAPP 10-second scan: 230400234 2012-Oct-30 20:14:57 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:14:57 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Oct-30 20:14:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:14:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Oct-30 20:14:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 898.00 2012-Oct-30 20:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11394.366087 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:15:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:15:08 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Oct-30 20:15:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:15:08 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2012-Oct-30 20:15:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Oct-30 20:15:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Oct-30 20:15:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Oct-30 20:15:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:15:08 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2012-Oct-30 20:15:08 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:15:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (857843921 != 857843922 diff = 1)! 2012-Oct-30 20:15:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (857843921 != 857843922 diff = 1)! 2012-Oct-30 20:15:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (857843921 != 857843922 diff = 1)! 2012-Oct-30 20:15:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (857843921 != 857843922 diff = 1)! 2012-Oct-30 20:15:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (857843921 != 857843922 diff = 1)! 2012-Oct-30 20:15:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (857843921 != 857843922 diff = 1)! 2012-Oct-30 20:15:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 20:15:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:15:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:15:09 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2012-Oct-30 20:15:09 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Oct-30 20:15:09 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:15:09 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Oct-30 20:15:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Oct-30 20:15:09 INFO2 take_data: Starting WAPP 10-second scan: 230400235 2012-Oct-30 20:15:09 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:15:09 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2012-Oct-30 20:15:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:15:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 910.00 2012-Oct-30 20:15:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Oct-30 20:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11394.366087 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1394.366087 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:15:20 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Oct-30 20:15:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:15:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:15:20 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2012-Oct-30 20:15:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:15:20 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Oct-30 20:15:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:15:20 STOP finish_task: Finishing task 'WAPP calibration' 2012-Oct-30 20:15:20 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2012-Oct-30 20:15:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2012-Oct-30 20:15:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:15:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2012-Oct-30 20:15:20 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2012-Oct-30 20:15:20 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:15:20 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2012-Oct-30 20:15:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:15:20 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:15:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:15:20 LOG3 vw_send: To DATATAKING: pnt tr 230430.000000 175622.000000 -CJ 2012-Oct-30 20:15:20 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:15:20 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2012-Oct-30 20:15:21 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:15:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:15:21 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:15:21 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2012-Oct-30 20:15:21 STOP finish_task: Finishing task 'standard on/off' 2012-Oct-30 20:15:21 LOG5 finish_task: Level: (1) ID = <10089> Status = 0 0 0 0 ok 2012-Oct-30 20:15:21 DONE finish_task: DONE finished pattern: standard on/off 2012-Oct-30 20:15:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:15:21 END end_task: Finishing task 'standard on/off' with status 'OK' 2012-Oct-30 20:15:21 LOG5 end_task: Level: (1) ID = <10089> Status = 0 0 0 0 ok 2012-Oct-30 20:15:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "FRELLED147" 2012-Oct-30 20:15:21 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (857844044 != 857844043 diff = 1)! 2012-Oct-30 20:15:21 LOG4 got_cormsg: From DATATAKING: pnt tr 230430.000000 175622.000000 -CJ 2012-Oct-30 20:15:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:15:31 COMMAND CIMA-send_to_exec: Sending command to point to a source 2012-Oct-30 20:15:31 LOG4 exec_msg: From OBSERVER: track_new_source J225640+164250 225640 +164250 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 19416 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2012-Oct-30 20:15:31 LOG1 track_new_source: Calling 'track_new_source J225640+164250 225640 +164250 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 19416 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2012-Oct-30 20:15:31 BEGIN begin_task: Starting task 'selecting new source' 2012-Oct-30 20:15:31 LOG5 begin_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2012-Oct-30 20:15:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J225640+164250} INFO {Selecting source 'J225640+164250' ...} 2012-Oct-30 20:15:31 LOG3 track_source: Calling 'track_source J225640+164250 225640 +164250 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 19416 Heliocentric velocity(optical)' 2012-Oct-30 20:15:31 START begin_task: Starting task 'sending tracking commands' 2012-Oct-30 20:15:31 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2012-Oct-30 20:15:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J225640+164250} INFO {Slewing to source 'J225640+164250' ...} 2012-Oct-30 20:15:31 INFO1 track_source: Starting to track J225640+164250 2012-Oct-30 20:15:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:15:31 LOG3 vw_send: To DATATAKING: set ra 225640 2012-Oct-30 20:15:31 LOG3 vw_send: To DATATAKING: set dec +164250 2012-Oct-30 20:15:31 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Oct-30 20:15:31 LOG3 vw_send: To DATATAKING: pnt tr 225640 +164250 -CJ 2012-Oct-30 20:15:31 LOG3 vw_send: To DATATAKING: dopsetvel 19416 hel 2012-Oct-30 20:15:31 STOP finish_task: Finishing task 'sending tracking commands' 2012-Oct-30 20:15:31 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2012-Oct-30 20:15:31 INFO2 finish_task: DONE finished sending: tracking commands 2012-Oct-30 20:15:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:15:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Oct-30 20:15:31 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2012-Oct-30 20:15:32 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2012-Oct-30 20:15:32 START begin_task: Starting task 'applying pointing corrections' 2012-Oct-30 20:15:32 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2012-Oct-30 20:15:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2012-Oct-30 20:15:32 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 20:15:32 STOP finish_task: Finishing task 'applying pointing corrections' 2012-Oct-30 20:15:32 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2012-Oct-30 20:15:32 INFO2 finish_task: DONE finished applying: pointing corrections 2012-Oct-30 20:15:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:15:32 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2012-Oct-30 20:15:32 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2012-Oct-30 20:15:32 STOP finish_task: Finishing task 'selecting new source' 2012-Oct-30 20:15:32 LOG5 finish_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2012-Oct-30 20:15:32 DONE finish_task: DONE finished selecting: new source 2012-Oct-30 20:15:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:15:32 END end_task: Finishing task 'selecting new source' with status 'OK' 2012-Oct-30 20:15:32 LOG5 end_task: Level: (1) ID = <10120> Status = 0 0 0 0 ok 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: set ra 225640 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: vw% 225640 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: set dec +164250 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: +164250 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: pnt tr 225640 +164250 -CJ 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 19416 hel 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 20:15:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:15:33 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2012-Oct-30 20:15:33 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2012-Oct-30 20:15:33 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2012-Oct-30 20:15:33 BEGIN begin_task: Starting task 'standard on/off' 2012-Oct-30 20:15:33 LOG5 begin_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2012-Oct-30 20:15:33 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'J225640+164250' 2012-Oct-30 20:15:33 INFO1 onoff_wapp: Starting pattern: Standard on/off 2012-Oct-30 20:15:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2012-Oct-30 20:15:33 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 20:15:33 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2012-Oct-30 20:15:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 20:15:33 LOG3 waittrk: Start waittrk 5 2012-Oct-30 20:15:33 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 20:15:33 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2012-Oct-30 20:15:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 20:15:38 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2012-Oct-30 20:15:39 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 20:15:39 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Oct-30 20:16:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 20:16:52 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Oct-30 20:16:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:16:52 INFO2 waittrk: Now tracking J225640+164250 2012-Oct-30 20:16:52 LOG4 waittrk: Current telescope position: Az = 281.30 ZA = 6.97 2012-Oct-30 20:16:52 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 20:16:52 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 20:16:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:16:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 20:16:53 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:16:53 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:16:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:16:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:16:53 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:16:53 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:16:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:16:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:16:53 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:16:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:16:53 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:16:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:16:53 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 20:16:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 20:16:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 20:16:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 20:16:53 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2012-Oct-30 20:16:53 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2012-Oct-30 20:16:53 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:16:53 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2012-Oct-30 20:16:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:16:53 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:16:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:16:54 LOG3 vw_send: To DATATAKING: pnt tr 225640.000000 164250.000000 -CJ 2012-Oct-30 20:16:54 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:16:54 LOG5 finish_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2012-Oct-30 20:16:54 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:16:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:16:54 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:16:54 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2012-Oct-30 20:16:54 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 20:16:54 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2012-Oct-30 20:16:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 20:16:54 LOG3 waittrk: Start waittrk 5 2012-Oct-30 20:16:54 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 20:16:54 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2012-Oct-30 20:16:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 20:16:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:16:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:16:54 LOG4 got_cormsg: From DATATAKING: pnt tr 225640.000000 164250.000000 -CJ 2012-Oct-30 20:16:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:16:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20121030.a2048.0003.fits 2012-Oct-30 20:16:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20121030.a2048.0003.fits} 2012-Oct-30 20:16:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 20:16:59 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2012-Oct-30 20:16:59 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 20:16:59 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2012-Oct-30 20:17:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 20:17:01 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2012-Oct-30 20:17:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:17:01 INFO2 waittrk: Now tracking J225640+164250 2012-Oct-30 20:17:01 LOG4 waittrk: Current telescope position: Az = 281.37 ZA = 6.93 2012-Oct-30 20:17:01 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 20:17:01 LOG5 finish_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2012-Oct-30 20:17:01 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 20:17:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:17:01 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 20:17:01 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2012-Oct-30 20:17:01 LOG5 antvel: Calling 'antvel 225640.000000 164250.000000 J Heliocentric 0' 2012-Oct-30 20:17:01 LOG2 antvel: Precessing RA = 22:56:40.0 Dec = +16:42:50.0 Epoch = 2012.83462 J 2012-Oct-30 20:17:01 LOG2 antvel: Computed apparent RA = 22:57:19.6 Dec = +16:47:14.7 2012-Oct-30 20:17:01 LOG2 antvel: Parameters to Doppler: Heliocentric 87421 2012 304 0.0 2012-Oct-30 20:17:02 INFO5 antvel: Computed antenna velocity: +20.14232 km/s 2012-Oct-30 20:17:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=19416.000000 veltype=velocity(optical) calctype=SUBBAND antvel=20.142316968900001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Oct-30 20:17:02 INFO4 dopset_gen: New sky frequencies: 1333.919302 1333.919302 1333.919302 1333.919302 1333.919302 1333.919302 1333.919302 1333.919302 1333.919302 2012-Oct-30 20:17:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1333.919302 sky0=1333.919302 sky1=1333.919302 sky2=1333.919302 sky3=1333.919302 sky4=1333.919302 sky5=1333.919302 sky6=1333.919302 sky7=1333.919302 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2012-Oct-30 20:17:02 LOG2 dopset_gen: Result from 'sky2syn': 11333.919302 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2012-Oct-30 20:17:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11333919302.0} 2012-Oct-30 20:17:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 20:17:02 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 20:17:02 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2012-Oct-30 20:17:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Oct-30 20:17:02 INFO2 adjust_power: Starting to adjust WAPP power 2012-Oct-30 20:17:02 LOG3 vw_send: To DATATAKING: adjpwrif1 2012-Oct-30 20:17:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2012-Oct-30 20:17:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:17:02 START begin_task: Starting task 'waiting on adjpwrif1' 2012-Oct-30 20:17:02 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2012-Oct-30 20:17:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11333919302.0} 2012-Oct-30 20:17:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 20:17:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:17:02 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2012-Oct-30 20:17:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:17:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:17:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:17:04 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:17:04 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2012-Oct-30 20:17:04 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2012-Oct-30 20:17:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2012-Oct-30 20:17:05 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Oct-30 20:17:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Oct-30 20:17:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:17:05 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Oct-30 20:17:05 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Oct-30 20:17:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:17:05 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Oct-30 20:17:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:17:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:17:06 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:17:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Oct-30 20:17:06 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Oct-30 20:17:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Oct-30 20:17:06 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 20:17:06 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2012-Oct-30 20:17:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Oct-30 20:17:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2012-Oct-30 20:17:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2012-Oct-30 20:17:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2012-Oct-30 20:17:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2012-Oct-30 20:17:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Oct-30 20:17:06 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2012-Oct-30 20:17:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:17:07 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 14 dB 2012-Oct-30 20:17:07 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 8 13 dB 2012-Oct-30 20:17:07 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 11 dB 2012-Oct-30 20:17:07 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2012-Oct-30 20:17:07 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2012-Oct-30 20:17:07 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2012-Oct-30 20:17:07 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2012-Oct-30 20:17:07 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2012-Oct-30 20:17:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Oct-30 20:17:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Oct-30 20:17:07 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2012-Oct-30 20:17:07 INFO2 wapp_adjpwr: WAPP power: 1.082 0.997 1.055 1.455 2012-Oct-30 20:17:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 20:17:07 LOG5 finish_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2012-Oct-30 20:17:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Oct-30 20:17:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:17:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 20:17:07 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2012-Oct-30 20:17:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:17:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 20:17:07 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2012-Oct-30 20:17:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Oct-30 20:17:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:17:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 20:17:07 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2012-Oct-30 20:17:07 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2012-Oct-30 20:17:07 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:17:07 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2012-Oct-30 20:17:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2012-Oct-30 20:17:08 INFO2 take_data: Starting WAPP 300-second scan: 230400236 2012-Oct-30 20:17:08 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:17:08 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2012-Oct-30 20:17:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:17:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2012-Oct-30 20:17:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1029.00 2012-Oct-30 20:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11333.919302 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:17:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764322 != 85764321 diff = 1)! 2012-Oct-30 20:17:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764300 != 85764301 diff = 1)! 2012-Oct-30 20:17:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764333 != 85764334 diff = 1)! 2012-Oct-30 20:17:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764333 != 85764334 diff = 1)! 2012-Oct-30 20:17:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764333 != 85764334 diff = 1)! 2012-Oct-30 20:17:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764333 != 85764334 diff = 1)! 2012-Oct-30 20:17:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764333 != 85764334 diff = 1)! 2012-Oct-30 20:17:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804450 != 85804449 diff = 1)! 2012-Oct-30 20:17:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804397 != 85804396 diff = 1)! 2012-Oct-30 20:17:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804397 != 85804396 diff = 1)! 2012-Oct-30 20:17:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804397 != 85804396 diff = 1)! 2012-Oct-30 20:17:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85767069 != 85767070 diff = 1)! 2012-Oct-30 20:17:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85767069 != 85767070 diff = 1)! 2012-Oct-30 20:17:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85767069 != 85767070 diff = 1)! 2012-Oct-30 20:17:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85767069 != 85767070 diff = 1)! 2012-Oct-30 20:17:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85767069 != 85767070 diff = 1)! 2012-Oct-30 20:17:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85767069 != 85767070 diff = 1)! 2012-Oct-30 20:17:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:17:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:17:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804437 != 85804438 diff = 1)! 2012-Oct-30 20:17:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804437 != 85804438 diff = 1)! 2012-Oct-30 20:17:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804437 != 85804438 diff = 1)! 2012-Oct-30 20:17:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804437 != 85804438 diff = 1)! 2012-Oct-30 20:17:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804437 != 85804438 diff = 1)! 2012-Oct-30 20:18:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:18:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85800427 != 85800428 diff = 1)! 2012-Oct-30 20:18:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85800427 != 85800428 diff = 1)! 2012-Oct-30 20:18:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:19:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764307 != 85764306 diff = 1)! 2012-Oct-30 20:19:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:19:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:19:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:19:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764328 != 85764327 diff = 1)! 2012-Oct-30 20:19:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775548 != 85775547 diff = 1)! 2012-Oct-30 20:19:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85793266 != 85793265 diff = 1)! 2012-Oct-30 20:20:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:20:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:20:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:20:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:20:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764336 != 85764335 diff = 1)! 2012-Oct-30 20:20:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:20:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764318 != 85764319 diff = 1)! 2012-Oct-30 20:20:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764292 != 85764291 diff = 1)! 2012-Oct-30 20:20:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764292 != 85764291 diff = 1)! 2012-Oct-30 20:20:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764292 != 85764291 diff = 1)! 2012-Oct-30 20:20:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764292 != 85764291 diff = 1)! 2012-Oct-30 20:20:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764292 != 85764291 diff = 1)! 2012-Oct-30 20:20:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764292 != 85764291 diff = 1)! 2012-Oct-30 20:20:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764308 != 85764307 diff = 1)! 2012-Oct-30 20:20:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764308 != 85764307 diff = 1)! 2012-Oct-30 20:20:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764308 != 85764307 diff = 1)! 2012-Oct-30 20:20:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764308 != 85764307 diff = 1)! 2012-Oct-30 20:21:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764324 != 85764323 diff = 1)! 2012-Oct-30 20:21:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85788973 != 85788974 diff = 1)! 2012-Oct-30 20:21:14 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85788973 != 85788974 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764296 != 85764295 diff = 1)! 2012-Oct-30 20:21:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85773802 != 85773801 diff = 1)! 2012-Oct-30 20:21:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85773802 != 85773801 diff = 1)! 2012-Oct-30 20:21:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85773802 != 85773801 diff = 1)! 2012-Oct-30 20:21:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85773802 != 85773801 diff = 1)! 2012-Oct-30 20:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:21:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:21:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804395 != 85804396 diff = 1)! 2012-Oct-30 20:21:31 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804395 != 85804396 diff = 1)! 2012-Oct-30 20:21:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804412 != 85804411 diff = 1)! 2012-Oct-30 20:21:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804412 != 85804411 diff = 1)! 2012-Oct-30 20:21:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804412 != 85804411 diff = 1)! 2012-Oct-30 20:21:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804412 != 85804411 diff = 1)! 2012-Oct-30 20:21:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804412 != 85804411 diff = 1)! 2012-Oct-30 20:21:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804412 != 85804411 diff = 1)! 2012-Oct-30 20:22:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:22:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:22:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:22:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:22:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764299 != 85764300 diff = 1)! 2012-Oct-30 20:22:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:22:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:22:09 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2012-Oct-30 20:22:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:22:09 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2012-Oct-30 20:22:09 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2012-Oct-30 20:22:09 LOG2 onoff_wapp: Parameters: RA-offset: -90.707100000001049 arcminutes wait: 60 secs 2012-Oct-30 20:22:09 LOG4 track_offsets: Calling 'track_offsets -90.707100000001049 0.0 main small' 2012-Oct-30 20:22:09 START begin_task: Starting task 'sending telescope offsets' 2012-Oct-30 20:22:09 LOG5 begin_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2012-Oct-30 20:22:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2012-Oct-30 20:22:09 INFO2 track_offsets: Starting to send new offsets 2012-Oct-30 20:22:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:22:09 LOG3 vw_send: To DATATAKING: pnt tr 225640.000000 164250.000000 -CJ -o -UD -1.51179 0.0 -CH 2012-Oct-30 20:22:09 STOP finish_task: Finishing task 'sending telescope offsets' 2012-Oct-30 20:22:09 LOG5 finish_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2012-Oct-30 20:22:09 INFO2 finish_task: DONE finished sending: telescope offsets 2012-Oct-30 20:22:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:22:09 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2012-Oct-30 20:22:10 LOG5 end_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2012-Oct-30 20:22:10 INFO2 lstwait: Waiting for 59.8 secs from LST 22:34:00 to LST 22:35:00 ... 2012-Oct-30 20:22:10 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Oct-30 20:22:10 START begin_task: Starting task 'waiting on wait on LST' 2012-Oct-30 20:22:10 LOG5 begin_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2012-Oct-30 20:22:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:22:10 LOG4 got_cormsg: From DATATAKING: pnt tr 225640.000000 164250.000000 -CJ -o -UD -1.51179 0.0 -CH 2012-Oct-30 20:22:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:22:50 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J225640+164250' (after 40 seconds) 2012-Oct-30 20:22:50 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 20 seconds to spare (40 < 60 seconds) 2012-Oct-30 20:23:10 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Oct-30 20:23:10 LOG5 end_task: Level: (2) ID = <10141> Status = 0 0 0 0 ok 2012-Oct-30 20:23:10 LOG4 lstwait: Finished waiting 0.16 seconds late 2012-Oct-30 20:23:10 INFO3 lstwait: Finished waiting 2012-Oct-30 20:23:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:23:10 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2012-Oct-30 20:23:10 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:23:10 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2012-Oct-30 20:23:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2012-Oct-30 20:23:10 INFO2 take_data: Starting WAPP 300-second scan: 230400237 2012-Oct-30 20:23:10 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:23:10 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Oct-30 20:23:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:23:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2012-Oct-30 20:23:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1391.00 2012-Oct-30 20:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11333.919302 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:23:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:23:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764313 != 85764314 diff = 1)! 2012-Oct-30 20:23:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804451 != 85804452 diff = 1)! 2012-Oct-30 20:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86164180 != 86164179 diff = 1)! 2012-Oct-30 20:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86164180 != 86164179 diff = 1)! 2012-Oct-30 20:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86164180 != 86164179 diff = 1)! 2012-Oct-30 20:23:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86164180 != 86164179 diff = 1)! 2012-Oct-30 20:24:08 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86164043 != 86164044 diff = 1)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86165606 != 86165605 diff = 1)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86165606 != 86165604 diff = 2)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86165606 != 86165605 diff = 1)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86165606 != 86165604 diff = 2)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86165606 != 86165604 diff = 2)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86165606 != 86165605 diff = 1)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86165606 != 86165605 diff = 1)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86165606 != 86165604 diff = 2)! 2012-Oct-30 20:24:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86165606 != 86165605 diff = 1)! 2012-Oct-30 20:24:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85778281 != 85778282 diff = 1)! 2012-Oct-30 20:24:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85778281 != 85778282 diff = 1)! 2012-Oct-30 20:24:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85778281 != 85778282 diff = 1)! 2012-Oct-30 20:24:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85778281 != 85778282 diff = 1)! 2012-Oct-30 20:24:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86244414 != 86244413 diff = 1)! 2012-Oct-30 20:24:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86244414 != 86244413 diff = 1)! 2012-Oct-30 20:24:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86244414 != 86244413 diff = 1)! 2012-Oct-30 20:24:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86244414 != 86244413 diff = 1)! 2012-Oct-30 20:24:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86244414 != 86244413 diff = 1)! 2012-Oct-30 20:24:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86244414 != 86244413 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:40 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:24:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85999786 != 85999785 diff = 1)! 2012-Oct-30 20:25:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85802844 != 85802843 diff = 1)! 2012-Oct-30 20:25:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85802844 != 85802843 diff = 1)! 2012-Oct-30 20:25:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85802844 != 85802843 diff = 1)! 2012-Oct-30 20:25:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85802844 != 85802843 diff = 1)! 2012-Oct-30 20:25:02 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85802844 != 85802843 diff = 1)! 2012-Oct-30 20:25:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:25:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:25:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:25:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:25:09 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:25:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804432 != 85804431 diff = 1)! 2012-Oct-30 20:25:20 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:25:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764348 != 85764347 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804400 != 85804399 diff = 1)! 2012-Oct-30 20:25:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86887151 != 86887152 diff = 1)! 2012-Oct-30 20:25:45 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86887151 != 86887152 diff = 1)! 2012-Oct-30 20:25:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85784197 != 85784198 diff = 1)! 2012-Oct-30 20:25:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85784197 != 85784198 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:05 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764456 != 85764455 diff = 1)! 2012-Oct-30 20:26:07 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85782494 != 85782493 diff = 1)! 2012-Oct-30 20:26:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:26:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:26:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:26:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:26:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:26:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:26:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:26:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:26:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:26:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:26:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:26:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764295 != 85764296 diff = 1)! 2012-Oct-30 20:26:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764312 != 85764311 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (86646532 != 86646531 diff = 1)! 2012-Oct-30 20:26:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86045055 != 86045056 diff = 1)! 2012-Oct-30 20:26:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86306510 != 86306509 diff = 1)! 2012-Oct-30 20:26:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86306510 != 86306509 diff = 1)! 2012-Oct-30 20:27:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:27:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:27:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:27:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804398 != 85804397 diff = 1)! 2012-Oct-30 20:27:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804398 != 85804397 diff = 1)! 2012-Oct-30 20:27:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804398 != 85804397 diff = 1)! 2012-Oct-30 20:27:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804398 != 85804397 diff = 1)! 2012-Oct-30 20:27:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804398 != 85804397 diff = 1)! 2012-Oct-30 20:27:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804398 != 85804397 diff = 1)! 2012-Oct-30 20:27:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85784441 != 85784442 diff = 1)! 2012-Oct-30 20:27:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85784441 != 85784442 diff = 1)! 2012-Oct-30 20:27:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85784441 != 85784442 diff = 1)! 2012-Oct-30 20:27:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:27:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:27:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804392 != 85804391 diff = 1)! 2012-Oct-30 20:27:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804392 != 85804391 diff = 1)! 2012-Oct-30 20:27:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804392 != 85804391 diff = 1)! 2012-Oct-30 20:27:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804392 != 85804391 diff = 1)! 2012-Oct-30 20:27:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86844586 != 86844585 diff = 1)! 2012-Oct-30 20:27:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86844586 != 86844585 diff = 1)! 2012-Oct-30 20:27:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86844586 != 86844585 diff = 1)! 2012-Oct-30 20:27:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86844586 != 86844585 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:27:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86485182 != 86485181 diff = 1)! 2012-Oct-30 20:27:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86485182 != 86485181 diff = 1)! 2012-Oct-30 20:27:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86485182 != 86485181 diff = 1)! 2012-Oct-30 20:27:58 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86485182 != 86485181 diff = 1)! 2012-Oct-30 20:28:06 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 20:28:06.300 (seconds: 73686.300)!} 2012-Oct-30 20:28:06 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 20:28:06.300 (seconds: 73686.300)! 2012-Oct-30 20:28:07 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 73685.0 to 73686.0! 2012-Oct-30 20:28:08 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (73685.0 - 73687.0)! 2012-Oct-30 20:28:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:28:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:28:11 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Oct-30 20:28:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:28:11 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2012-Oct-30 20:28:11 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2012-Oct-30 20:28:11 START begin_task: Starting task 'WAPP calibration' 2012-Oct-30 20:28:11 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2012-Oct-30 20:28:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2012-Oct-30 20:28:11 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:28:11 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Oct-30 20:28:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:28:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:28:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:28:11 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:28:11 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Oct-30 20:28:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:28:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:28:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:28:12 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:28:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:28:12 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Oct-30 20:28:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:28:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:28:12 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Oct-30 20:28:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Oct-30 20:28:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Oct-30 20:28:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Oct-30 20:28:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:28:12 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2012-Oct-30 20:28:12 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:28:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:28:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Oct-30 20:28:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:28:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:28:12 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2012-Oct-30 20:28:12 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Oct-30 20:28:12 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:28:12 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2012-Oct-30 20:28:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Oct-30 20:28:12 INFO2 take_data: Starting WAPP 10-second scan: 230400238 2012-Oct-30 20:28:13 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:28:13 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2012-Oct-30 20:28:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:28:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Oct-30 20:28:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1694.00 2012-Oct-30 20:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11333.919302 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:28:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:28:24 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2012-Oct-30 20:28:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:28:24 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2012-Oct-30 20:28:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Oct-30 20:28:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Oct-30 20:28:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Oct-30 20:28:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:28:24 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Oct-30 20:28:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (862156033 != 862156032 diff = 1)! 2012-Oct-30 20:28:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (862156033 != 862156031 diff = 2)! 2012-Oct-30 20:28:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (862156033 != 862156032 diff = 1)! 2012-Oct-30 20:28:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (862156033 != 862156032 diff = 1)! 2012-Oct-30 20:28:24 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:28:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 20:28:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:28:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:28:25 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Oct-30 20:28:25 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Oct-30 20:28:25 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:28:25 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Oct-30 20:28:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Oct-30 20:28:25 INFO2 take_data: Starting WAPP 10-second scan: 230400239 2012-Oct-30 20:28:25 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:28:25 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Oct-30 20:28:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:28:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Oct-30 20:28:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1706.00 2012-Oct-30 20:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11333.919302 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1333.919302 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:28:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Oct-30 20:28:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:28:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:28:36 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Oct-30 20:28:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:28:36 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Oct-30 20:28:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:28:36 STOP finish_task: Finishing task 'WAPP calibration' 2012-Oct-30 20:28:36 LOG5 finish_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2012-Oct-30 20:28:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2012-Oct-30 20:28:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:28:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2012-Oct-30 20:28:36 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2012-Oct-30 20:28:36 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:28:36 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2012-Oct-30 20:28:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:28:37 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:28:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:28:37 LOG3 vw_send: To DATATAKING: pnt tr 225640.000000 164250.000000 -CJ 2012-Oct-30 20:28:37 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:28:37 LOG5 finish_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2012-Oct-30 20:28:37 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:28:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:28:37 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:28:37 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2012-Oct-30 20:28:37 STOP finish_task: Finishing task 'standard on/off' 2012-Oct-30 20:28:37 LOG5 finish_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2012-Oct-30 20:28:37 DONE finish_task: DONE finished pattern: standard on/off 2012-Oct-30 20:28:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:28:37 END end_task: Finishing task 'standard on/off' with status 'OK' 2012-Oct-30 20:28:37 LOG5 end_task: Level: (1) ID = <10123> Status = 0 0 0 0 ok 2012-Oct-30 20:28:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J225640+164250" 2012-Oct-30 20:28:37 LOG4 got_cormsg: From DATATAKING: pnt tr 225640.000000 164250.000000 -CJ 2012-Oct-30 20:28:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:28:46 COMMAND CIMA-send_to_exec: Sending command to point to a source 2012-Oct-30 20:28:46 LOG4 exec_msg: From OBSERVER: track_new_source J230652+165630 230652 +165630 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 18515 Heliocentric velocity(optical) 0 0 0.0 0.0 0 2012-Oct-30 20:28:46 LOG1 track_new_source: Calling 'track_new_source J230652+165630 230652 +165630 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 18515 Heliocentric velocity(optical) 0 0 0.0 0.0 0' 2012-Oct-30 20:28:46 BEGIN begin_task: Starting task 'selecting new source' 2012-Oct-30 20:28:46 LOG5 begin_task: Level: (1) ID = <10154> Status = 0 0 0 0 ok 2012-Oct-30 20:28:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {J230652+165630} INFO {Selecting source 'J230652+165630' ...} 2012-Oct-30 20:28:47 LOG3 track_source: Calling 'track_source J230652+165630 230652 +165630 J 0 0 main small /share/obs4/usr/a2048/7448FollowUpNEW_2.cat 18515 Heliocentric velocity(optical)' 2012-Oct-30 20:28:47 START begin_task: Starting task 'sending tracking commands' 2012-Oct-30 20:28:47 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {J230652+165630} INFO {Slewing to source 'J230652+165630' ...} 2012-Oct-30 20:28:47 INFO1 track_source: Starting to track J230652+165630 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: set ra 230652 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: set dec +165630 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: pnt tr 230652 +165630 -CJ 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: dopsetvel 18515 hel 2012-Oct-30 20:28:47 STOP finish_task: Finishing task 'sending tracking commands' 2012-Oct-30 20:28:47 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 INFO2 finish_task: DONE finished sending: tracking commands 2012-Oct-30 20:28:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:28:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Oct-30 20:28:47 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0.0 0.0 0' 2012-Oct-30 20:28:47 START begin_task: Starting task 'applying pointing corrections' 2012-Oct-30 20:28:47 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2012-Oct-30 20:28:47 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 20:28:47 STOP finish_task: Finishing task 'applying pointing corrections' 2012-Oct-30 20:28:47 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 INFO2 finish_task: DONE finished applying: pointing corrections 2012-Oct-30 20:28:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:28:47 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2012-Oct-30 20:28:47 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 STOP finish_task: Finishing task 'selecting new source' 2012-Oct-30 20:28:47 LOG5 finish_task: Level: (1) ID = <10154> Status = 0 0 0 0 ok 2012-Oct-30 20:28:47 DONE finish_task: DONE finished selecting: new source 2012-Oct-30 20:28:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:28:48 END end_task: Finishing task 'selecting new source' with status 'OK' 2012-Oct-30 20:28:48 LOG5 end_task: Level: (1) ID = <10154> Status = 0 0 0 0 ok 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: set ra 230652 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 230652 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: set dec +165630 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: +165630 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: pnt tr 230652 +165630 -CJ 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 18515 hel 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2012-Oct-30 20:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:28:48 COMMAND CIMA-send_to_exec: Sending command to run standard on/off 2012-Oct-30 20:28:49 LOG4 exec_msg: From OBSERVER: onoff 1 300 60 hcorcal 10 off lcorcal each first one 2012-Oct-30 20:28:49 LOG1 onoff_wapp: Calling 'onoff_wapp 1 300 60 hcorcal 10 off lcorcal each first one' 2012-Oct-30 20:28:49 BEGIN begin_task: Starting task 'standard on/off' 2012-Oct-30 20:28:49 LOG5 begin_task: Level: (1) ID = <10157> Status = 0 0 0 0 ok 2012-Oct-30 20:28:49 INFO4 begin_task: MAKING 'standard on/off' using 'lbw' + 'WAPP' on 'J230652+165630' 2012-Oct-30 20:28:49 INFO1 onoff_wapp: Starting pattern: Standard on/off 2012-Oct-30 20:28:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Standard on/off} TOTALLOOPS 1 INFO {Starting standard on/off observation ...} 2012-Oct-30 20:28:49 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 20:28:49 LOG5 begin_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2012-Oct-30 20:28:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 20:28:49 LOG3 waittrk: Start waittrk 5 2012-Oct-30 20:28:49 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 20:28:49 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2012-Oct-30 20:28:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 20:28:54 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2012-Oct-30 20:28:54 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 20:28:54 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Oct-30 20:29:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 20:29:28 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Oct-30 20:29:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:29:28 INFO2 waittrk: Now tracking J230652+165630 2012-Oct-30 20:29:29 LOG4 waittrk: Current telescope position: Az = 280.53 ZA = 6.35 2012-Oct-30 20:29:29 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 20:29:29 LOG5 finish_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2012-Oct-30 20:29:29 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 20:29:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:29:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 20:29:29 LOG5 end_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2012-Oct-30 20:29:29 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:29:29 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2012-Oct-30 20:29:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:29:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:29:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:29:29 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:29:29 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Oct-30 20:29:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:29:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:29:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:29 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:29:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:29:29 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Oct-30 20:29:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:29:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:29:29 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2012-Oct-30 20:29:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 RT 2012-Oct-30 20:29:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 RT 2012-Oct-30 20:29:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 RT 2012-Oct-30 20:29:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 RT 2012-Oct-30 20:29:29 INFO2 onoff_wapp: Starting standard on/off loop 1 of 1 2012-Oct-30 20:29:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 TOTALPARTS 2 PART 1 INFO {Making ON observation followed by OFF} 2012-Oct-30 20:29:29 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:29:29 LOG5 begin_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2012-Oct-30 20:29:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:29:30 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:29:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:29:30 LOG3 vw_send: To DATATAKING: pnt tr 230652.000000 165630.000000 -CJ 2012-Oct-30 20:29:30 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:29:30 LOG5 finish_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2012-Oct-30 20:29:30 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:29:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:29:30 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:29:30 LOG5 end_task: Level: (2) ID = <10163> Status = 0 0 0 0 ok 2012-Oct-30 20:29:30 START begin_task: Starting task 'waiting on telescope' 2012-Oct-30 20:29:30 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2012-Oct-30 20:29:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Oct-30 20:29:30 LOG3 waittrk: Start waittrk 5 2012-Oct-30 20:29:30 START begin_task: Starting task 'waiting on telescope movement' 2012-Oct-30 20:29:30 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Oct-30 20:29:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 RT' 2012-Oct-30 20:29:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:29:30 LOG4 got_cormsg: From DATATAKING: pnt tr 230652.000000 165630.000000 -CJ 2012-Oct-30 20:29:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:29:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20121030.a2048.0004.fits 2012-Oct-30 20:29:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20121030.a2048.0004.fits} 2012-Oct-30 20:29:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Oct-30 20:29:35 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Oct-30 20:29:35 START begin_task: Starting task 'waiting on telescope on source' 2012-Oct-30 20:29:35 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2012-Oct-30 20:29:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Oct-30 20:29:37 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2012-Oct-30 20:29:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:29:37 INFO2 waittrk: Now tracking J230652+165630 2012-Oct-30 20:29:37 LOG4 waittrk: Current telescope position: Az = 280.60 ZA = 6.32 2012-Oct-30 20:29:37 STOP finish_task: Finishing task 'waiting on telescope' 2012-Oct-30 20:29:37 LOG5 finish_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2012-Oct-30 20:29:37 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Oct-30 20:29:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:29:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Oct-30 20:29:37 LOG5 end_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2012-Oct-30 20:29:38 LOG5 antvel: Calling 'antvel 230652.000000 165630.000000 J Heliocentric 0' 2012-Oct-30 20:29:38 LOG2 antvel: Precessing RA = 23:06:52.0 Dec = +16:56:30.0 Epoch = 2012.83464 J 2012-Oct-30 20:29:38 LOG2 antvel: Computed apparent RA = 23:07:31.9 Dec = +17:00:57.4 2012-Oct-30 20:29:38 LOG2 antvel: Parameters to Doppler: Heliocentric 88177 2012 304 0.0 2012-Oct-30 20:29:38 INFO5 antvel: Computed antenna velocity: +19.40211 km/s 2012-Oct-30 20:29:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=18515.000000 veltype=velocity(optical) calctype=SUBBAND antvel=19.402109841000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Oct-30 20:29:38 INFO4 dopset_gen: New sky frequencies: 1337.698392 1337.698392 1337.698392 1337.698392 1337.698392 1337.698392 1337.698392 1337.698392 1337.698392 2012-Oct-30 20:29:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1337.698392 sky0=1337.698392 sky1=1337.698392 sky2=1337.698392 sky3=1337.698392 sky4=1337.698392 sky5=1337.698392 sky6=1337.698392 sky7=1337.698392 dest0=275 dest1=275 dest2=275 dest3=275 dest4=275 dest5=275 dest6=275 dest7=275 2012-Oct-30 20:29:38 LOG2 dopset_gen: Result from 'sky2syn': 11337.698392 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 1775.000000 2 2 2 2 2 2 2 2 2012-Oct-30 20:29:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 11337698392.0} 2012-Oct-30 20:29:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 20:29:38 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 20:29:38 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2012-Oct-30 20:29:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Oct-30 20:29:38 INFO2 adjust_power: Starting to adjust WAPP power 2012-Oct-30 20:29:38 LOG3 vw_send: To DATATAKING: adjpwrif1 2012-Oct-30 20:29:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif1' using string 'DONE' 2012-Oct-30 20:29:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:29:38 START begin_task: Starting task 'waiting on adjpwrif1' 2012-Oct-30 20:29:38 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 11337698392.0} 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0 1775000000.0} 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: adjpwrif1 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:38 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:29:38 STOP end_task: Finishing task 'waiting on adjpwrif1' with status 'OK' 2012-Oct-30 20:29:38 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2012-Oct-30 20:29:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif1' 2012-Oct-30 20:29:38 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Oct-30 20:29:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Oct-30 20:29:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:29:39 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Oct-30 20:29:39 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2012-Oct-30 20:29:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Oct-30 20:29:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:29:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:39 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:29:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Oct-30 20:29:39 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2012-Oct-30 20:29:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Oct-30 20:29:39 START begin_task: Starting task 'adjusting WAPP power' 2012-Oct-30 20:29:39 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2012-Oct-30 20:29:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Oct-30 20:29:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 50 2 1 0 0 0 2012-Oct-30 20:29:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 50 2 1 1 0 0 2012-Oct-30 20:29:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 25 2 1 0 0 0 2012-Oct-30 20:29:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 25 2 1 1 0 0 2012-Oct-30 20:29:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Oct-30 20:29:39 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2012-Oct-30 20:29:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:29:39 INFO2 WAPP=1-auto_atten_oneboard: Attenuators: 12 14 dB 2012-Oct-30 20:29:39 INFO2 WAPP=2-auto_atten_oneboard: Attenuators: 8 13 dB 2012-Oct-30 20:29:39 LOG4 WAPP=4-wappcon: Received command 'ADJUSTPOWER 25 2 1 1 0 0' 2012-Oct-30 20:29:39 LOG4 WAPP=3-wappcon: Received command 'ADJUSTPOWER 25 2 1 0 0 0' 2012-Oct-30 20:29:39 LOG4 WAPP=2-wappcon: Received command 'ADJUSTPOWER 50 2 1 1 0 0' 2012-Oct-30 20:29:39 LOG4 WAPP=1-wappcon: Received command 'ADJUSTPOWER 50 2 1 0 0 0' 2012-Oct-30 20:29:40 INFO2 WAPP=3-auto_atten_oneboard: Attenuators: 15 11 dB 2012-Oct-30 20:29:40 INFO2 WAPP=4-auto_atten_oneboard: Attenuators: 7 15 dB 2012-Oct-30 20:29:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Oct-30 20:29:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Oct-30 20:29:40 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2012-Oct-30 20:29:40 INFO2 wapp_adjpwr: WAPP power: 1.101 1.017 1.063 1.462 2012-Oct-30 20:29:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 20:29:40 LOG5 finish_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2012-Oct-30 20:29:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Oct-30 20:29:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:29:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 20:29:40 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2012-Oct-30 20:29:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:29:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Oct-30 20:29:40 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2012-Oct-30 20:29:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Oct-30 20:29:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:29:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Oct-30 20:29:40 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2012-Oct-30 20:29:40 LOG4 take_data: Calling 'take_data 300 1 ONOFF ON stat_onoff_on {ON scan}' 2012-Oct-30 20:29:40 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:29:40 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2012-Oct-30 20:29:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for ON scan ...} 2012-Oct-30 20:29:40 INFO2 take_data: Starting WAPP 300-second scan: 230400240 2012-Oct-30 20:29:41 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:29:41 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2012-Oct-30 20:29:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:29:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_on MESSAGE {Taking ON scan ...} 2012-Oct-30 20:29:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1782.00 2012-Oct-30 20:29:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11337.698392 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:29:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:29:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:29:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:29:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:29:44 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86243566 != 86243565 diff = 1)! 2012-Oct-30 20:30:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (86125430 != 86125429 diff = 1)! 2012-Oct-30 20:30:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86125430 != 86125429 diff = 1)! 2012-Oct-30 20:30:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (86125430 != 86125429 diff = 1)! 2012-Oct-30 20:30:15 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (86125430 != 86125429 diff = 1)! 2012-Oct-30 20:30:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85964935 != 85964936 diff = 1)! 2012-Oct-30 20:30:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85964935 != 85964936 diff = 1)! 2012-Oct-30 20:30:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85964935 != 85964936 diff = 1)! 2012-Oct-30 20:30:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (86404674 != 86404673 diff = 1)! 2012-Oct-30 20:30:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (86404674 != 86404673 diff = 1)! 2012-Oct-30 20:30:27 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (86404674 != 86404673 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85781140 != 85781139 diff = 1)! 2012-Oct-30 20:30:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85843446 != 85843445 diff = 1)! 2012-Oct-30 20:30:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86082741 != 86082742 diff = 1)! 2012-Oct-30 20:30:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86082741 != 86082742 diff = 1)! 2012-Oct-30 20:30:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86082741 != 86082742 diff = 1)! 2012-Oct-30 20:30:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (86081641 != 86081642 diff = 1)! 2012-Oct-30 20:30:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (86081641 != 86081642 diff = 1)! 2012-Oct-30 20:30:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (86081641 != 86081642 diff = 1)! 2012-Oct-30 20:30:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (86081641 != 86081642 diff = 1)! 2012-Oct-30 20:31:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804397 != 85804396 diff = 1)! 2012-Oct-30 20:31:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:31:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:31:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:31:54 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:32:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804389 != 85804390 diff = 1)! 2012-Oct-30 20:32:22 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804389 != 85804390 diff = 1)! 2012-Oct-30 20:32:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85775882 != 85775881 diff = 1)! 2012-Oct-30 20:32:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85783438 != 85783437 diff = 1)! 2012-Oct-30 20:32:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85783438 != 85783437 diff = 1)! 2012-Oct-30 20:32:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85783438 != 85783437 diff = 1)! 2012-Oct-30 20:32:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804404 != 85804403 diff = 1)! 2012-Oct-30 20:32:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804404 != 85804403 diff = 1)! 2012-Oct-30 20:32:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804404 != 85804403 diff = 1)! 2012-Oct-30 20:32:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804404 != 85804403 diff = 1)! 2012-Oct-30 20:32:37 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804404 != 85804403 diff = 1)! 2012-Oct-30 20:32:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:32:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:32:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:32:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804413 != 85804414 diff = 1)! 2012-Oct-30 20:32:47 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804420 != 85804419 diff = 1)! 2012-Oct-30 20:32:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:32:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:32:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:32:52 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85764301 != 85764302 diff = 1)! 2012-Oct-30 20:32:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:32:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:32:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:32:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:32:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:32:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:32:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85790316 != 85790315 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85767251 != 85767252 diff = 1)! 2012-Oct-30 20:33:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804396 != 85804395 diff = 1)! 2012-Oct-30 20:33:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804396 != 85804395 diff = 1)! 2012-Oct-30 20:33:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804396 != 85804395 diff = 1)! 2012-Oct-30 20:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:33:13 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764300 != 85764299 diff = 1)! 2012-Oct-30 20:33:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764318 != 85764317 diff = 1)! 2012-Oct-30 20:33:17 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764318 != 85764317 diff = 1)! 2012-Oct-30 20:33:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764285 != 85764284 diff = 1)! 2012-Oct-30 20:33:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764285 != 85764284 diff = 1)! 2012-Oct-30 20:33:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764285 != 85764284 diff = 1)! 2012-Oct-30 20:33:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764285 != 85764284 diff = 1)! 2012-Oct-30 20:33:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764285 != 85764284 diff = 1)! 2012-Oct-30 20:33:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764285 != 85764284 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85764288 != 85764287 diff = 1)! 2012-Oct-30 20:33:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804363 != 85804364 diff = 1)! 2012-Oct-30 20:33:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804363 != 85804364 diff = 1)! 2012-Oct-30 20:33:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804363 != 85804364 diff = 1)! 2012-Oct-30 20:33:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804363 != 85804364 diff = 1)! 2012-Oct-30 20:33:30 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804363 != 85804364 diff = 1)! 2012-Oct-30 20:33:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85788866 != 85788865 diff = 1)! 2012-Oct-30 20:33:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788866 != 85788865 diff = 1)! 2012-Oct-30 20:33:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85788866 != 85788865 diff = 1)! 2012-Oct-30 20:33:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85788866 != 85788865 diff = 1)! 2012-Oct-30 20:33:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:33:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:33:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:33:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804403 != 85804404 diff = 1)! 2012-Oct-30 20:33:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804402 != 85804401 diff = 1)! 2012-Oct-30 20:33:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804402 != 85804401 diff = 1)! 2012-Oct-30 20:33:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804402 != 85804400 diff = 2)! 2012-Oct-30 20:33:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804402 != 85804401 diff = 1)! 2012-Oct-30 20:33:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804402 != 85804401 diff = 1)! 2012-Oct-30 20:33:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804430 != 85804429 diff = 1)! 2012-Oct-30 20:33:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804430 != 85804429 diff = 1)! 2012-Oct-30 20:33:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804430 != 85804429 diff = 1)! 2012-Oct-30 20:33:57 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804430 != 85804429 diff = 1)! 2012-Oct-30 20:33:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804435 != 85804436 diff = 1)! 2012-Oct-30 20:33:59 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804435 != 85804436 diff = 1)! 2012-Oct-30 20:34:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:34:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:34:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:34:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:34:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:34:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:34:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764307 != 85764308 diff = 1)! 2012-Oct-30 20:34:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85764307 != 85764308 diff = 1)! 2012-Oct-30 20:34:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85764307 != 85764308 diff = 1)! 2012-Oct-30 20:34:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764307 != 85764308 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85765054 != 85765053 diff = 1)! 2012-Oct-30 20:34:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85787987 != 85787988 diff = 1)! 2012-Oct-30 20:34:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85787987 != 85787988 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 8 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85804421 != 85804422 diff = 1)! 2012-Oct-30 20:34:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:34:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:34:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:34:33 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764334 != 85764333 diff = 1)! 2012-Oct-30 20:34:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804410 != 85804409 diff = 1)! 2012-Oct-30 20:34:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804410 != 85804409 diff = 1)! 2012-Oct-30 20:34:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804410 != 85804409 diff = 1)! 2012-Oct-30 20:34:36 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804410 != 85804409 diff = 1)! 2012-Oct-30 20:34:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:34:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:34:42 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2012-Oct-30 20:34:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:34:42 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2012-Oct-30 20:34:42 LOG4 send_obs_status: To obs_status: <1> PART 2 INFO {Waiting for OFF observation followed by CAL} 2012-Oct-30 20:34:42 LOG2 onoff_wapp: Parameters: RA-offset: -90.95729999999925 arcminutes wait: 60 secs 2012-Oct-30 20:34:42 LOG4 track_offsets: Calling 'track_offsets -90.95729999999925 0.0 main small' 2012-Oct-30 20:34:42 START begin_task: Starting task 'sending telescope offsets' 2012-Oct-30 20:34:42 LOG5 begin_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2012-Oct-30 20:34:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Telescope Offsets} INFO {Changing telescope offsets ...} 2012-Oct-30 20:34:42 INFO2 track_offsets: Starting to send new offsets 2012-Oct-30 20:34:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:34:42 LOG3 vw_send: To DATATAKING: pnt tr 230652.000000 165630.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 20:34:42 STOP finish_task: Finishing task 'sending telescope offsets' 2012-Oct-30 20:34:42 LOG5 finish_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2012-Oct-30 20:34:42 INFO2 finish_task: DONE finished sending: telescope offsets 2012-Oct-30 20:34:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:34:42 STOP end_task: Finishing task 'sending telescope offsets' with status 'OK' 2012-Oct-30 20:34:42 LOG5 end_task: Level: (2) ID = <10174> Status = 0 0 0 0 ok 2012-Oct-30 20:34:43 INFO2 lstwait: Waiting for 59.8 secs from LST 22:46:35 to LST 22:47:35 ... 2012-Oct-30 20:34:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 59.836175999996598 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Oct-30 20:34:43 START begin_task: Starting task 'waiting on wait on LST' 2012-Oct-30 20:34:43 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2012-Oct-30 20:34:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:34:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:34:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:34:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:34:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:34:43 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:34:43 LOG4 got_cormsg: From DATATAKING: pnt tr 230652.000000 165630.000000 -CJ -o -UD -1.51595 0.0 -CH 2012-Oct-30 20:34:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:35:23 INFO4 wait_and_tell_when_on_source: Telescope is now on source 'J230652+165630' (after 40 seconds) 2012-Oct-30 20:35:23 LOG3 wait_and_tell_when_on_source: The telescope arrived at source with 20 seconds to spare (40 < 60 seconds) 2012-Oct-30 20:35:42 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Oct-30 20:35:43 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2012-Oct-30 20:35:43 LOG4 lstwait: Finished waiting 0.17 seconds late 2012-Oct-30 20:35:43 INFO3 lstwait: Finished waiting 2012-Oct-30 20:35:43 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Oct-30 20:35:43 LOG4 take_data: Calling 'take_data 300 1 ONOFF OFF stat_onoff_off {OFF scan}' 2012-Oct-30 20:35:43 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:35:43 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2012-Oct-30 20:35:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for OFF scan ...} 2012-Oct-30 20:35:43 INFO2 take_data: Starting WAPP 300-second scan: 230400241 2012-Oct-30 20:35:43 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:35:43 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2012-Oct-30 20:35:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:35:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2144.00 2012-Oct-30 20:35:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 300 BITMAP stat_onoff_off MESSAGE {Taking OFF scan ...} 2012-Oct-30 20:35:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11337.698392 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:35:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:35:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:35:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:35:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:35:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764318 != 85764317 diff = 1)! 2012-Oct-30 20:35:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764318 != 85764317 diff = 1)! 2012-Oct-30 20:35:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764318 != 85764317 diff = 1)! 2012-Oct-30 20:35:49 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764318 != 85764317 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:06 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804440 != 85804439 diff = 1)! 2012-Oct-30 20:36:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:36:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:36:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:36:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:36:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:36:39 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804408 != 85804407 diff = 1)! 2012-Oct-30 20:36:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85789166 != 85789165 diff = 1)! 2012-Oct-30 20:36:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789166 != 85789165 diff = 1)! 2012-Oct-30 20:36:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85789166 != 85789165 diff = 1)! 2012-Oct-30 20:36:41 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85789166 != 85789165 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:36:55 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764316 != 85764315 diff = 1)! 2012-Oct-30 20:37:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:37:12 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804420 != 85804419 diff = 1)! 2012-Oct-30 20:37:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85789946 != 85789945 diff = 1)! 2012-Oct-30 20:37:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789946 != 85789945 diff = 1)! 2012-Oct-30 20:37:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85789946 != 85789945 diff = 1)! 2012-Oct-30 20:37:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85789946 != 85789945 diff = 1)! 2012-Oct-30 20:37:26 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778814 != 85778813 diff = 1)! 2012-Oct-30 20:37:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85771252 != 85771251 diff = 1)! 2012-Oct-30 20:37:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85771252 != 85771251 diff = 1)! 2012-Oct-30 20:37:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85771252 != 85771251 diff = 1)! 2012-Oct-30 20:37:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85771252 != 85771251 diff = 1)! 2012-Oct-30 20:37:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85771252 != 85771251 diff = 1)! 2012-Oct-30 20:37:29 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804434 != 85804433 diff = 1)! 2012-Oct-30 20:37:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85764345 != 85764346 diff = 1)! 2012-Oct-30 20:37:38 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85764345 != 85764346 diff = 1)! 2012-Oct-30 20:37:46 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764314 != 85764313 diff = 1)! 2012-Oct-30 20:37:53 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804434 != 85804433 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:04 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 15 (85796472 != 85796471 diff = 1)! 2012-Oct-30 20:38:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85789058 != 85789057 diff = 1)! 2012-Oct-30 20:38:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:38:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:38:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 5 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:38:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 6 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:38:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:38:16 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 12 (85804415 != 85804416 diff = 1)! 2012-Oct-30 20:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:38:18 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:38:56 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764344 != 85764343 diff = 1)! 2012-Oct-30 20:39:11 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804434 != 85804433 diff = 1)! 2012-Oct-30 20:39:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804446 != 85804445 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 3 (85801999 != 85802000 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 7 (85801999 != 85802000 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85801999 != 85801998 diff = 1)! 2012-Oct-30 20:39:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804436 != 85804435 diff = 1)! 2012-Oct-30 20:39:32 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804436 != 85804435 diff = 1)! 2012-Oct-30 20:39:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85764302 != 85764301 diff = 1)! 2012-Oct-30 20:39:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85764302 != 85764301 diff = 1)! 2012-Oct-30 20:39:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85764302 != 85764301 diff = 1)! 2012-Oct-30 20:39:35 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85764302 != 85764301 diff = 1)! 2012-Oct-30 20:39:48 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804447 != 85804446 diff = 1)! 2012-Oct-30 20:39:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:39:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:39:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:39:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:39:50 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804406 != 85804405 diff = 1)! 2012-Oct-30 20:39:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85778058 != 85778057 diff = 1)! 2012-Oct-30 20:39:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85778058 != 85778057 diff = 1)! 2012-Oct-30 20:39:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85778058 != 85778057 diff = 1)! 2012-Oct-30 20:39:51 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85778058 != 85778057 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 13 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:00 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85767964 != 85767963 diff = 1)! 2012-Oct-30 20:40:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:40:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:40:19 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804390 != 85804389 diff = 1)! 2012-Oct-30 20:40:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 1 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:40:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:40:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:40:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:40:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 11 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:40:23 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85804418 != 85804417 diff = 1)! 2012-Oct-30 20:40:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85780602 != 85780601 diff = 1)! 2012-Oct-30 20:40:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85780602 != 85780601 diff = 1)! 2012-Oct-30 20:40:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85780602 != 85780601 diff = 1)! 2012-Oct-30 20:40:24 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85780602 != 85780601 diff = 1)! 2012-Oct-30 20:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 2 (85788184 != 85788183 diff = 1)! 2012-Oct-30 20:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85788184 != 85788183 diff = 1)! 2012-Oct-30 20:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 10 (85788184 != 85788183 diff = 1)! 2012-Oct-30 20:40:25 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 14 (85788184 != 85788183 diff = 1)! 2012-Oct-30 20:40:28 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 9 (85769449 != 85769448 diff = 1)! 2012-Oct-30 20:40:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:40:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:40:44 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2012-Oct-30 20:40:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:40:44 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2012-Oct-30 20:40:44 LOG2 take_cal: Calling 'take_cal hcorcal 10 0' 2012-Oct-30 20:40:44 START begin_task: Starting task 'WAPP calibration' 2012-Oct-30 20:40:44 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2012-Oct-30 20:40:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2012-Oct-30 20:40:44 START begin_task: Starting task 'selecting calibration type' 2012-Oct-30 20:40:44 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2012-Oct-30 20:40:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Oct-30 20:40:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Oct-30 20:40:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:40:44 START begin_task: Starting task 'waiting on setcal' 2012-Oct-30 20:40:44 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2012-Oct-30 20:40:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Oct-30 20:40:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Oct-30 20:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:40:45 LOG4 got_cormsg: From DATATAKING: DONE 2012-Oct-30 20:40:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Oct-30 20:40:45 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2012-Oct-30 20:40:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Oct-30 20:40:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Oct-30 20:40:45 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2012-Oct-30 20:40:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Oct-30 20:40:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Oct-30 20:40:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Oct-30 20:40:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:40:45 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2012-Oct-30 20:40:45 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:40:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Oct-30 20:40:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:40:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:40:45 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2012-Oct-30 20:40:45 LOG4 take_data: Calling 'take_data 10 10 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Oct-30 20:40:45 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:40:45 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2012-Oct-30 20:40:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Oct-30 20:40:45 INFO2 take_data: Starting WAPP 10-second scan: 230400242 2012-Oct-30 20:40:46 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:40:46 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2012-Oct-30 20:40:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:40:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Oct-30 20:40:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2447.00 2012-Oct-30 20:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11337.698392 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:40:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:40:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:40:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:40:57 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2012-Oct-30 20:40:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:40:57 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2012-Oct-30 20:40:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Oct-30 20:40:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Oct-30 20:40:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Oct-30 20:40:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Oct-30 20:40:57 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2012-Oct-30 20:40:57 LOG3 CALCONTROL-caltrig: Software trigger 2012-Oct-30 20:40:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Oct-30 20:40:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Oct-30 20:40:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Oct-30 20:40:57 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2012-Oct-30 20:40:57 LOG4 take_data: Calling 'take_data 10 10 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Oct-30 20:40:58 START begin_task: Starting task 'WAPP spectral observation' 2012-Oct-30 20:40:58 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2012-Oct-30 20:40:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Oct-30 20:40:58 INFO2 take_data: Starting WAPP 10-second scan: 230400243 2012-Oct-30 20:40:58 START begin_task: Starting task 'waiting on WAPP spectra' 2012-Oct-30 20:40:58 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2012-Oct-30 20:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Oct-30 20:40:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Oct-30 20:40:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2459.00 2012-Oct-30 20:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 11337.698392 MHz --- rfnum = 5 ifnum = 4 inpfrq = 3 2012-Oct-30 20:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:41:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1337.698392 MHz Flip = 1 Band = 2 Mixer = 1775.000000 MHz 2012-Oct-30 20:41:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Oct-30 20:41:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Oct-30 20:41:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2012-Oct-30 20:41:09 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2012-Oct-30 20:41:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2012-Oct-30 20:41:09 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2012-Oct-30 20:41:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Oct-30 20:41:09 STOP finish_task: Finishing task 'WAPP calibration' 2012-Oct-30 20:41:09 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2012-Oct-30 20:41:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2012-Oct-30 20:41:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:41:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2012-Oct-30 20:41:09 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2012-Oct-30 20:41:09 START begin_task: Starting task 'clearing telescope offsets' 2012-Oct-30 20:41:09 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2012-Oct-30 20:41:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Clearing Telescope Offsets} INFO {Removing telescope offsets ...} 2012-Oct-30 20:41:10 INFO3 clear_offsets: Removing telescope offsets 2012-Oct-30 20:41:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:41:10 LOG3 vw_send: To DATATAKING: pnt tr 230652.000000 165630.000000 -CJ 2012-Oct-30 20:41:10 STOP finish_task: Finishing task 'clearing telescope offsets' 2012-Oct-30 20:41:10 LOG5 finish_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2012-Oct-30 20:41:10 INFO2 finish_task: DONE finished clearing: telescope offsets 2012-Oct-30 20:41:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Oct-30 20:41:10 STOP end_task: Finishing task 'clearing telescope offsets' with status 'OK' 2012-Oct-30 20:41:10 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2012-Oct-30 20:41:10 STOP finish_task: Finishing task 'standard on/off' 2012-Oct-30 20:41:10 LOG5 finish_task: Level: (1) ID = <10157> Status = 0 0 0 0 ok 2012-Oct-30 20:41:10 DONE finish_task: DONE finished pattern: standard on/off 2012-Oct-30 20:41:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Oct-30 20:41:10 END end_task: Finishing task 'standard on/off' with status 'OK' 2012-Oct-30 20:41:10 LOG5 end_task: Level: (1) ID = <10157> Status = 0 0 0 0 ok 2012-Oct-30 20:41:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "J230652+165630" 2012-Oct-30 20:41:10 LOG3 WAPP=3-chip_count: Counts don't match between chip 0 and chip 4 (858429703 != 858429704 diff = 1)! 2012-Oct-30 20:41:10 LOG4 got_cormsg: From DATATAKING: pnt tr 230652.000000 165630.000000 -CJ 2012-Oct-30 20:41:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Oct-30 20:41:26 ALERT CIMA-exit_cima: Exiting CIMA ... 2012-Oct-30 20:41:26 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2012-Oct-30 20:41:26 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2012-Oct-30 20:41:26 LOG3 vw_send: To DATATAKING: mvdata a2048 2012-Oct-30 20:41:26 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2012-Oct-30 20:41:26 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2012-Oct-30 20:41:26 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2012-Oct-30 20:41:26 NOTE CIMA-exit_cima: Cleaning up session ... 2012-Oct-30 20:41:26 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2012-Oct-30 20:41:26 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2012-Oct-30 20:41:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Oct-30 20:41:26 LOG4 got_cormsg: From DATATAKING: vw%