2012-Jun-01 19:05:02 BEGIN executive: CIMA executive starting ... 2012-Jun-01 19:05:02 NOTE executive: STARTING NEW CIMA SESSION 2012-Jun-01 19:05:02 INFO1 executive: Using CIMA version 3.3.02 'stable' from 2012-04-05 19:32 2012-Jun-01 19:05:02 INFO4 executive: This is an ON-LINE session 2012-Jun-01 19:05:02 INFO4 executive: This is a LOCAL session 2012-Jun-01 19:05:02 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Jun-01 19:05:02 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Israel cabrera' 2012-Jun-01 19:05:02 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20120601' 2012-Jun-01 19:05:03 LOG2 log_preferences: Currently applied preferences: 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(dailylog) = daily 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(offlinelog) = write 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(logcolours) = full 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(displaylevel) = LOG5 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(displayformat) = long 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(logformat) = new 2012-Jun-01 19:05:03 LOG2 log_preferences: prefs(fontsize) = 4 2012-Jun-01 19:05:03 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Jun-01 19:05:03 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Jun-01 19:05:03 ALERT executive: CIMA executive ready 2012-Jun-01 19:05:04 NOTE frontend: CIMA frontend ready 2012-Jun-01 19:05:04 LOG4 got_cormsg: From DATATAKING: vw% setup 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2012-Jun-01 19:05:10 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% io 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2012-Jun-01 19:05:10 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:05:15 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Jun-01 19:05:15 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2012-Jun-01 19:05:15 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Jun-01 19:05:15 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2012-Jun-01 19:05:15 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Jun-01 19:05:15 NOTE select_receiver: Starting to select receiver ALFA 2012-Jun-01 19:05:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Jun-01 19:05:15 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Jun-01 19:05:15 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Jun-01 19:05:15 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Jun-01 19:05:15 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Jun-01 19:05:15 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Jun-01 19:05:15 DONE finish_task: DONE finished selecting: receiver ALFA 2012-Jun-01 19:05:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:05:15 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Jun-01 19:05:15 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Jun-01 19:05:15 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Jun-01 19:05:15 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Jun-01 19:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:05:58 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima33.cmd' (at lines 1 - 24) 2012-Jun-01 19:05:58 INFO4 CIMA-load_command_file: Loaded command file '120601.cmd' 2012-Jun-01 19:06:00 INFO1 CIMA-run_command_file: Transferring command file '120601.cmd' to executive ... 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima33.conf} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 27 {IF LSTSLEW(AGES1367_p3_011) < 112439 THEN} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 28 {FIXEDDRIFT az=216.22 alfaangle=-13.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_011 ra=113400.00 dec=213500.00} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 31 {ENDIF} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 34 {IF LSTSLEW(AGES1367_p3_001) < 115039 THEN} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 35 {FIXEDDRIFT az=132.90 alfaangle=63.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_001 ra=113400.00 dec=215000.00} 2012-Jun-01 19:06:00 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 38 {ENDIF} 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 41 {IF LSTSLEW(AGES1367_p3_007) < 121409 THEN} 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 42 {FIXEDDRIFT az=111.00 alfaangle=88.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_007 ra=113400.00 dec=214100.00} 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 45 {ENDIF} 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 48 {IF LSTSLEW(AGES1367_p3_009) < 123739 THEN} 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 49 {FIXEDDRIFT az=104.86 alfaangle=-81.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_009 ra=113400.00 dec=213800.00} 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 52 {ENDIF} 2012-Jun-01 19:06:01 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: run_command_file 120601.cmd 1 1 25 2012-Jun-01 19:06:01 LOG4 run_command_file: Calling 'run_command_file 120601.cmd 1 1 25' 2012-Jun-01 19:06:01 BEGIN begin_task: Starting task 'running command file '120601.cmd'' 2012-Jun-01 19:06:01 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Jun-01 19:06:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '120601.cmd' ...} 2012-Jun-01 19:06:01 NOTE run_command_file: Starting execution of command file '120601.cmd' from line 1 2012-Jun-01 19:06:01 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima33.conf' 2012-Jun-01 19:06:01 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jun-01 19:06:01 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Jun-01 19:06:01 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima33.conf' 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Jun-01 19:06:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1375.0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1625.000000" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Jun-01 19:06:02 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Jun-01 19:06:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jun-01 19:06:03 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Jun-01 19:06:03 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Jun-01 19:06:03 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Jun-01 19:06:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO Path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Jun-01 19:06:03 INFO1 config_iflo: Selecting receiver ALFA 2012-Jun-01 19:06:03 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2012-Jun-01 19:06:03 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2012-Jun-01 19:06:03 START begin_task: Starting task 'selecting receiver ALFA' 2012-Jun-01 19:06:03 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Jun-01 19:06:03 NOTE select_receiver: Starting to select receiver ALFA 2012-Jun-01 19:06:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Jun-01 19:06:03 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Jun-01 19:06:03 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Jun-01 19:06:04 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Jun-01 19:06:04 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Jun-01 19:06:04 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Jun-01 19:06:04 INFO2 finish_task: DONE finished selecting: receiver ALFA 2012-Jun-01 19:06:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:06:04 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Jun-01 19:06:04 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Jun-01 19:06:04 START begin_task: Starting task 'waiting for receiver ALFA' 2012-Jun-01 19:06:04 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Jun-01 19:06:04 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2012-Jun-01 19:06:04 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Jun-01 19:06:04 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Jun-01 19:06:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Jun-01 19:06:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:06:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:06:04 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:06:04 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Jun-01 19:06:04 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:06:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:06:04 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Jun-01 19:06:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:06:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: alfafb 1 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Jun-01 19:06:04 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Jun-01 19:06:04 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Jun-01 19:06:04 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Jun-01 19:06:04 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Jun-01 19:06:04 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Jun-01 19:06:05 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Jun-01 19:06:05 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Jun-01 19:06:05 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Jun-01 19:06:05 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Jun-01 19:06:05 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Jun-01 19:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Jun-01 19:06:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Jun-01 19:06:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:06:05 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Jun-01 19:06:05 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: alfafb 1 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Jun-01 19:06:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Jun-01 19:06:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:20 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:06:20 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Jun-01 19:06:20 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Jun-01 19:06:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Jun-01 19:06:20 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Jun-01 19:06:20 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Jun-01 19:06:20 DONE finish_task: DONE finished configuration: IF/LO path 2012-Jun-01 19:06:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:06:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Jun-01 19:06:20 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Jun-01 19:06:20 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Jun-01 19:06:20 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Jun-01 19:06:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Jun-01 19:06:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Jun-01 19:06:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Jun-01 19:06:20 START begin_task: Starting task 'selecting calibration port' 2012-Jun-01 19:06:20 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Jun-01 19:06:20 LOG3 vw_send: To DATATAKING: calport 3 2012-Jun-01 19:06:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Jun-01 19:06:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:06:20 START begin_task: Starting task 'waiting on calport' 2012-Jun-01 19:06:20 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Jun-01 19:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:20 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Jun-01 19:06:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:06:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:21 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:06:21 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Jun-01 19:06:21 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Jun-01 19:06:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Jun-01 19:06:21 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Jun-01 19:06:21 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Jun-01 19:06:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:06:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:06:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:06:21 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Jun-01 19:06:21 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:06:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:06:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:06:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:06:21 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:22 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Jun-01 19:06:22 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Jun-01 19:06:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:06:22 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Jun-01 19:06:22 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:06:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:06:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:06:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:06:22 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Jun-01 19:06:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 19:06:22 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Jun-01 19:06:22 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Jun-01 19:06:22 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Jun-01 19:06:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:06:22 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Jun-01 19:06:22 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Jun-01 19:06:22 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2012-Jun-01 19:06:22 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2012-Jun-01 19:06:23 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2012-Jun-01 19:06:23 LOG3 is_if_valid: Current source data: up 189.9 2.7 UP - - 85 7.1 2012-Jun-01 19:06:23 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2012-Jun-01 19:06:23 INFO5 is_if_valid: Condition parsed as: 1 2012-Jun-01 19:06:23 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2012-Jun-01 19:06:23 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2012-Jun-01 19:06:23 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2012-Jun-01 19:06:23 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Jun-01 19:06:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2012-Jun-01 19:06:23 LOG3 track_source: Calling 'track_source galfasrc 112400.0 +210500 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2012-Jun-01 19:06:23 START begin_task: Starting task 'sending tracking commands' 2012-Jun-01 19:06:23 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Jun-01 19:06:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2012-Jun-01 19:06:23 INFO1 track_source: Starting to track galfasrc 2012-Jun-01 19:06:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2012-Jun-01 19:06:23 LOG3 vw_send: To DATATAKING: set ra 112400.0 2012-Jun-01 19:06:23 LOG3 vw_send: To DATATAKING: set dec +210500 2012-Jun-01 19:06:23 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jun-01 19:06:23 LOG3 vw_send: To DATATAKING: pnt tr 112400.0 +210500 -CJ 2012-Jun-01 19:06:23 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2012-Jun-01 19:06:23 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jun-01 19:06:23 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Jun-01 19:06:23 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jun-01 19:06:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:06:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jun-01 19:06:23 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Jun-01 19:06:23 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2012-Jun-01 19:06:23 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Jun-01 19:06:24 DONE finish_task: DONE finished tracking: source 'galfasrc' 2012-Jun-01 19:06:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:06:24 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2012-Jun-01 19:06:24 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2012-Jun-01 19:06:24 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2012-Jun-01 19:06:24 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2012-Jun-01 19:06:24 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2012-Jun-01 19:06:24 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2012-Jun-01 19:06:24 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2012-Jun-01 19:06:24 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2012-Jun-01 19:06:24 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2012-Jun-01 19:06:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2012-Jun-01 19:06:24 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Jun-01 19:06:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2012-Jun-01 19:06:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2012-Jun-01 19:06:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2012-Jun-01 19:06:24 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jun-01 19:06:24 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jun-01 19:06:24 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Jun-01 19:06:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20120601.a2048.0000.fits 2012-Jun-01 19:06:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 19:06:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2012-Jun-01 19:06:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Jun-01 19:06:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Jun-01 19:06:24 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20120601.a2048.0000.fits} 2012-Jun-01 19:06:24 LOG4 got_cormsg: From DATATAKING: set ra 112400.0 2012-Jun-01 19:06:24 LOG4 got_cormsg: From DATATAKING: vw% 112400.0 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: set dec +210500 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: +210500 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: pnt tr 112400.0 +210500 -CJ 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2012-Jun-01 19:06:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 19:06:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jun-01 19:06:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jun-01 19:06:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2012-Jun-01 19:06:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jun-01 19:06:56 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Jun-01 19:06:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jun-01 19:06:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2012-Jun-01 19:06:56 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Jun-01 19:06:56 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2012-Jun-01 19:06:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:06:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2012-Jun-01 19:06:56 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Jun-01 19:06:56 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2012-Jun-01 19:06:56 BEGIN begin_task: Starting task 'waiting on telescope' 2012-Jun-01 19:06:57 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Jun-01 19:06:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jun-01 19:06:57 LOG3 waittrk: Start waittrk 5 2012-Jun-01 19:06:57 START begin_task: Starting task 'waiting on telescope movement' 2012-Jun-01 19:06:57 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Jun-01 19:07:02 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jun-01 19:07:02 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Jun-01 19:07:02 START begin_task: Starting task 'waiting on telescope on source' 2012-Jun-01 19:07:02 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Jun-01 19:14:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jun-01 19:14:57 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Jun-01 19:14:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jun-01 19:14:58 INFO2 waittrk: Now tracking galfasrc 2012-Jun-01 19:14:58 LOG4 waittrk: Current telescope position: Az = 149.69 ZA = 3.09 2012-Jun-01 19:14:58 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jun-01 19:14:58 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Jun-01 19:14:58 DONE finish_task: DONE finished waiting: telescope on source 2012-Jun-01 19:14:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:14:58 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jun-01 19:14:58 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Jun-01 19:14:58 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Jun-01 19:14:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2012-Jun-01 19:14:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jun-01 19:14:58 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Jun-01 19:14:58 BEGIN begin_task: Starting task 'smart frequency switching' 2012-Jun-01 19:14:58 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Jun-01 19:14:58 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2012-Jun-01 19:14:59 INFO1 smartfreq: Starting pattern: Smart frequency switching 2012-Jun-01 19:14:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2012-Jun-01 19:14:59 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 19:14:59 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 19:14:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 19:14:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:14:59 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 19:14:59 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 19:14:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:14:59 LOG4 got_cormsg: From DATATAKING: vw% DONE 2012-Jun-01 19:14:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 19:14:59 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 19:14:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:14:59 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 19:14:59 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:14:59 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:14:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:14:59 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:14:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 19:14:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:14:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:14:59 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:14:59 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:14:59 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:14:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:14:59 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Jun-01 19:14:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:14:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:14:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 19:14:59 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2012-Jun-01 19:15:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 19:15:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 19:15:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 19:15:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 19:15:00 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20120601.a2048.0000.fits' is empty! 2012-Jun-01 19:15:00 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2012-Jun-01 19:15:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jun-01 19:15:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 19:15:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:15:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:15:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:15:00 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Jun-01 19:15:00 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:15:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:15:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:15:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:15:00 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Jun-01 19:15:00 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Jun-01 19:15:00 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:15:00 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Jun-01 19:15:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Jun-01 19:15:00 INFO2 adjust_power: Starting to adjust WAPP power 2012-Jun-01 19:15:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jun-01 19:15:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jun-01 19:15:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:15:00 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jun-01 19:15:00 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Jun-01 19:15:00 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jun-01 19:15:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 19:15:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:03 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:15:03 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jun-01 19:15:03 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Jun-01 19:15:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jun-01 19:15:03 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:15:03 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Jun-01 19:15:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jun-01 19:15:03 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:15:03 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:15:03 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:15:03 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:15:03 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jun-01 19:15:03 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2012-Jun-01 19:15:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jun-01 19:15:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 7 dB 2012-Jun-01 19:15:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 9 5 dB --- beam 3: 7 3 dB 2012-Jun-01 19:15:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 7 dB --- beam 5: 9 6 dB 2012-Jun-01 19:15:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 3 dB --- beam 7: 10 4 dB 2012-Jun-01 19:15:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jun-01 19:15:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jun-01 19:15:04 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2012-Jun-01 19:15:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.942 0.923 ALFA beam 1: 0.992 1.049 2012-Jun-01 19:15:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.007 0.950 ALFA beam 3: 1.040 1.112 2012-Jun-01 19:15:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.903 1.018 ALFA beam 5: 0.914 0.946 2012-Jun-01 19:15:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.024 1.099 ALFA beam 7: 0.897 1.046 2012-Jun-01 19:15:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:15:04 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Jun-01 19:15:04 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jun-01 19:15:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:15:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:15:04 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Jun-01 19:15:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 19:15:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:15:04 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Jun-01 19:15:04 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Jun-01 19:15:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:15:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:15:04 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Jun-01 19:15:04 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Jun-01 19:15:04 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:15:04 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:15:04 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:15:04 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:15:04 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:15:04 LOG2 antvel: Parameters to Doppler: Topocentric 83704 2012 153 0.0 2012-Jun-01 19:15:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:15:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:15:05 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:15:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:15:05 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:15:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:15:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Jun-01 19:15:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:15:05 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Jun-01 19:15:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:15:05 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.522984 2012.4210872816691 18.999933 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333343 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 1 11.404889234557915 21.002261537158756 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 2 11.406554674308429 21.096601929330916 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 3 11.401768965800287 21.178993308702438 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 4 11.395036897507349 21.163681282150591 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 5 11.393416902245137 21.066944616485713 2012-Jun-01 19:15:05 LOG4 log_alfabeam: ALFABEAM 6 11.398480396282165 20.987960934870678 2012-Jun-01 19:15:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300077 2012-Jun-01 19:15:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:15:06 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Jun-01 19:15:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:15:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:15:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:15:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83707.00 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:15:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:15:17 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Jun-01 19:15:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:15:17 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Jun-01 19:15:17 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Jun-01 19:15:17 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:15:17 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:15:17 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:15:17 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:15:17 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:15:17 LOG2 antvel: Parameters to Doppler: Topocentric 83717 2012 153 0.0 2012-Jun-01 19:15:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:15:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:15:17 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:15:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:15:17 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:15:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:15:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Jun-01 19:15:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:15:18 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Jun-01 19:15:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:15:18 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.526605 2012.4210876936143 18.999933 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333329 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 1 11.404971463584408 21.003246887872891 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 2 11.406540674603500 21.097919516432668 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 3 11.401670369522632 21.179334929351761 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 4 11.394955932673422 21.162687267950112 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 5 11.393434358629781 21.065647726894969 2012-Jun-01 19:15:18 LOG4 log_alfabeam: ALFABEAM 6 11.398576457644220 20.987666070779088 2012-Jun-01 19:15:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300078 2012-Jun-01 19:15:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:15:18 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2012-Jun-01 19:15:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:15:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:15:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:15:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83719.00 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:15:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:15:29 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2012-Jun-01 19:15:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:15:29 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Jun-01 19:15:29 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Jun-01 19:15:29 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:15:29 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:15:29 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:15:29 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:15:29 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:15:29 LOG2 antvel: Parameters to Doppler: Topocentric 83729 2012 153 0.0 2012-Jun-01 19:15:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:15:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:15:29 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:15:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:15:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:15:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:15:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Jun-01 19:15:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:15:29 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Jun-01 19:15:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:15:30 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.529948 2012.4210880738713 18.999933 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333343 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 1 11.405045282505009 21.004156125478037 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 2 11.406526788608399 21.099114055565721 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 3 11.401580499567590 21.179627963665133 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 4 11.394883278439185 21.161770600764822 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 5 11.393451346152442 21.064473139665974 2012-Jun-01 19:15:30 LOG4 log_alfabeam: ALFABEAM 6 11.398663944021516 20.987414637729763 2012-Jun-01 19:15:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300079 2012-Jun-01 19:15:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:15:30 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Jun-01 19:15:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:15:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:15:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:15:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83731.00 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:15:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:15:41 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Jun-01 19:15:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:15:41 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Jun-01 19:15:41 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Jun-01 19:15:41 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:15:41 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:15:41 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:15:41 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:15:41 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:15:41 LOG2 antvel: Parameters to Doppler: Topocentric 83741 2012 153 0.0 2012-Jun-01 19:15:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:15:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:15:41 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:15:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:15:41 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:15:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:15:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Jun-01 19:15:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:15:42 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2012-Jun-01 19:15:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:15:42 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.533290 2012.4210884541283 18.999933 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333350 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 1 11.405117098437923 21.005063887635124 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 2 11.406512039250408 21.100287192134392 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 3 11.401491791801879 21.179900207059948 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 4 11.394812623020178 21.160855941112224 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 5 11.393469109852488 21.063320692532418 2012-Jun-01 19:15:42 LOG4 log_alfabeam: ALFABEAM 6 11.398750232626567 20.987182495820278 2012-Jun-01 19:15:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300080 2012-Jun-01 19:15:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:15:42 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2012-Jun-01 19:15:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:15:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:15:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:15:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83743.00 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:15:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:15:53 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2012-Jun-01 19:15:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:15:53 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2012-Jun-01 19:15:53 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Jun-01 19:15:53 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:15:53 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:15:53 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:15:53 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:15:53 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:15:53 LOG2 antvel: Parameters to Doppler: Topocentric 83753 2012 153 0.0 2012-Jun-01 19:15:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:15:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:15:53 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:15:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:15:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:15:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:15:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Jun-01 19:15:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:15:53 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2012-Jun-01 19:15:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:15:53 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.536633 2012.4210888343853 18.999933 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333332 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 1 11.405186986869053 21.005970021591512 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 2 11.406496469704761 21.101439631027372 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 3 11.401404214410713 21.180152552729073 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 4 11.394743890291233 21.159943421652212 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 5 11.393487608486591 21.062189630919875 2012-Jun-01 19:15:54 LOG4 log_alfabeam: ALFABEAM 6 11.398835358697733 20.986968793574860 2012-Jun-01 19:15:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300081 2012-Jun-01 19:15:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:15:54 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Jun-01 19:15:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:15:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:15:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:15:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:15:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:15:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83755.00 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:15:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:16:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:16:05 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Jun-01 19:16:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:16:05 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2012-Jun-01 19:16:05 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Jun-01 19:16:05 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:16:05 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:16:05 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:16:05 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:16:05 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:16:05 LOG2 antvel: Parameters to Doppler: Topocentric 83765 2012 153 0.0 2012-Jun-01 19:16:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:16:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:16:05 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:16:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:16:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:16:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:16:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Jun-01 19:16:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:16:06 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2012-Jun-01 19:16:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:16:06 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.539975 2012.4210892146423 18.999933 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333336 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 1 11.405254940053041 21.006873330622607 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 2 11.406480139861578 21.102570721461277 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 3 11.401317837902930 21.180385574600930 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 4 11.394677086069722 21.159034226651745 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 5 11.393506780753166 21.061080532920908 2012-Jun-01 19:16:06 LOG4 log_alfabeam: ALFABEAM 6 11.398919257837093 20.986772954322316 2012-Jun-01 19:16:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300082 2012-Jun-01 19:16:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:16:06 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Jun-01 19:16:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:16:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:16:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:16:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83767.00 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:16:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:16:17 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Jun-01 19:16:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:16:17 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2012-Jun-01 19:16:17 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Jun-01 19:16:17 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:16:17 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:16:17 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:16:17 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:16:17 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:16:17 LOG2 antvel: Parameters to Doppler: Topocentric 83776 2012 153 0.0 2012-Jun-01 19:16:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:16:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:16:17 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:16:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:16:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:16:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:16:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Jun-01 19:16:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:16:17 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Jun-01 19:16:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:16:18 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.543039 2012.4210895632114 18.999933 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000020 21.083333333333343 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 1 11.405315589020637 21.007698729991098 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 2 11.406464538309955 21.103589331599132 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 3 11.401239691506674 21.180582915448603 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 4 11.394617483895098 21.158203854025139 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 5 11.393524913369637 21.060082582562252 2012-Jun-01 19:16:18 LOG4 log_alfabeam: ALFABEAM 6 11.398995113190489 20.986608449259226 2012-Jun-01 19:16:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300083 2012-Jun-01 19:16:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:16:18 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Jun-01 19:16:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:16:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:16:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:16:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83779.00 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:16:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:16:29 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Jun-01 19:16:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:16:29 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Jun-01 19:16:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Jun-01 19:16:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 19:16:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 19:16:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:16:29 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2012-Jun-01 19:16:29 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:16:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 19:16:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:16:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:16:29 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2012-Jun-01 19:16:29 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Jun-01 19:16:29 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:16:30 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:16:30 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:16:30 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:16:30 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:16:30 LOG2 antvel: Parameters to Doppler: Topocentric 83789 2012 153 0.0 2012-Jun-01 19:16:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:16:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:16:30 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:16:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:16:30 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:16:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:16:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Jun-01 19:16:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:16:30 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Jun-01 19:16:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:16:30 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.546660 2012.4210899751565 18.999933 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 21.083333333333332 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 1 11.405385265990683 21.008670139087407 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 2 11.406445375089652 21.104770541871602 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 3 11.401148641115171 21.180796799864247 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 4 11.394549034740312 21.157227071343936 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 5 11.393546976152908 21.058926340346581 2012-Jun-01 19:16:30 LOG4 log_alfabeam: ALFABEAM 6 11.399083436241195 20.986431850345916 2012-Jun-01 19:16:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300084 2012-Jun-01 19:16:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:16:31 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2012-Jun-01 19:16:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:16:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:16:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:16:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83792.00 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:16:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:16:42 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2012-Jun-01 19:16:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:16:42 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Jun-01 19:16:42 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Jun-01 19:16:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:16:42 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:16:42 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:16:42 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:16:42 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:16:42 LOG2 antvel: Parameters to Doppler: Topocentric 83802 2012 153 0.0 2012-Jun-01 19:16:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:16:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:16:42 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:16:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:16:42 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:16:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:16:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Jun-01 19:16:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:16:43 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2012-Jun-01 19:16:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:16:43 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.550281 2012.4210903871017 18.999933 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 21.083333333333343 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 1 11.405452824509355 21.009636526731022 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 2 11.406425481418296 21.105927457931532 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 3 11.401059012939466 21.180990585171241 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 4 11.394482692831838 21.156255835691926 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 5 11.393569671187517 21.057794926945245 2012-Jun-01 19:16:43 LOG4 log_alfabeam: ALFABEAM 6 11.399170320395893 20.986273736646730 2012-Jun-01 19:16:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300085 2012-Jun-01 19:16:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:16:43 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Jun-01 19:16:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:16:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:16:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:16:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83804.00 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:16:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:16:54 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Jun-01 19:16:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:16:54 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2012-Jun-01 19:16:54 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Jun-01 19:16:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:16:54 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:16:54 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:16:54 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:16:54 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:16:54 LOG2 antvel: Parameters to Doppler: Topocentric 83814 2012 153 0.0 2012-Jun-01 19:16:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:16:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:16:54 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:16:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:16:54 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:16:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:16:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Jun-01 19:16:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:16:54 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Jun-01 19:16:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:16:55 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.553624 2012.4210907673587 18.999933 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 0 11.399999999999999 21.083333333333343 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 1 11.405513357646418 21.010523715221314 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 2 11.406406515370486 21.106974157473623 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 3 11.400977536287888 21.181152403491520 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 4 11.394423271991105 21.155364619634501 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 5 11.393591137468363 21.056772191008658 2012-Jun-01 19:16:55 LOG4 log_alfabeam: ALFABEAM 6 11.399249252998704 20.986143449556096 2012-Jun-01 19:16:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300086 2012-Jun-01 19:16:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:16:55 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Jun-01 19:16:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:16:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:16:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:16:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:16:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:16:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83816.00 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:16:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:17:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:17:06 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Jun-01 19:17:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:17:06 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Jun-01 19:17:06 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Jun-01 19:17:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:17:06 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:17:06 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:17:06 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:17:06 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:17:06 LOG2 antvel: Parameters to Doppler: Topocentric 83826 2012 153 0.0 2012-Jun-01 19:17:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:17:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:17:06 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:17:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:17:06 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:17:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:17:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Jun-01 19:17:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:17:07 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2012-Jun-01 19:17:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:17:07 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.556966 2012.4210911476157 18.999933 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333343 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 1 11.405572148223069 21.011405362456017 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 2 11.406387023329014 21.108000199030336 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 3 11.400897307850995 21.181298464389872 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 4 11.394365582098002 21.154479359117353 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 5 11.393613047596311 21.055770458360271 2012-Jun-01 19:17:07 LOG4 log_alfabeam: ALFABEAM 6 11.399326931485787 20.986027595758245 2012-Jun-01 19:17:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300087 2012-Jun-01 19:17:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:17:07 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2012-Jun-01 19:17:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:17:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:17:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:17:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83828.00 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:17:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:17:18 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2012-Jun-01 19:17:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:17:18 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2012-Jun-01 19:17:18 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Jun-01 19:17:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:17:18 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:17:18 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:17:18 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:17:18 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:17:18 LOG2 antvel: Parameters to Doppler: Topocentric 83837 2012 153 0.0 2012-Jun-01 19:17:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:17:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:17:18 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:17:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:17:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:17:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:17:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Jun-01 19:17:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:17:18 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2012-Jun-01 19:17:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:17:19 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.560030 2012.4210914961848 18.999933 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000023 21.083333333333332 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 1 11.405624566946885 21.012208673203901 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 2 11.406368720638536 21.108923190000436 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 3 11.400824830374541 21.181419135890135 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 4 11.394314161981583 21.153673084494486 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 5 11.393633496797051 21.054870024715296 2012-Jun-01 19:17:19 LOG4 log_alfabeam: ALFABEAM 6 11.399397068085030 20.985933489836942 2012-Jun-01 19:17:19 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300088 2012-Jun-01 19:17:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:17:19 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Jun-01 19:17:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:17:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:17:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:17:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83840.00 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:17:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:17:30 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Jun-01 19:17:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:17:30 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2012-Jun-01 19:17:30 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Jun-01 19:17:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:17:30 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:17:30 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:17:30 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:17:30 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:17:30 LOG2 antvel: Parameters to Doppler: Topocentric 83850 2012 153 0.0 2012-Jun-01 19:17:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:17:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:17:30 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:17:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:17:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:17:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:17:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Jun-01 19:17:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:17:31 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2012-Jun-01 19:17:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:17:31 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.563651 2012.4210919081299 18.999933 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 21.083333333333329 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 1 11.405684730709671 21.013151429688929 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 2 11.406346600524975 21.109992381334639 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 3 11.400740506252889 21.181546112216054 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 4 11.394255164701649 21.152727237903800 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 5 11.393658068251700 21.053827777879278 2012-Jun-01 19:17:31 LOG4 log_alfabeam: ALFABEAM 6 11.399478625371376 20.985836550581492 2012-Jun-01 19:17:31 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300089 2012-Jun-01 19:17:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:17:31 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2012-Jun-01 19:17:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:17:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:17:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:17:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83852.00 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:38 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:17:38.294 (seconds: 69458.294)!} 2012-Jun-01 19:17:38 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:17:38.294 (seconds: 69458.294)! 2012-Jun-01 19:17:39 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 69457.0 to 69458.0! 2012-Jun-01 19:17:40 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (69457.0 - 69459.0)! 2012-Jun-01 19:17:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:17:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:17:42 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2012-Jun-01 19:17:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:17:42 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2012-Jun-01 19:17:42 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Jun-01 19:17:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:17:42 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:17:42 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:17:42 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:17:42 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:17:42 LOG2 antvel: Parameters to Doppler: Topocentric 83861 2012 153 0.0 2012-Jun-01 19:17:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:17:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:17:42 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:17:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:17:42 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:17:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:17:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Jun-01 19:17:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:17:42 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Jun-01 19:17:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:17:43 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.566715 2012.4210922566988 18.999933 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333318 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 1 11.405734165572266 21.013943273116507 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 2 11.406327501896117 21.110879049457552 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 3 11.400670276447320 21.181640887632469 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 4 11.394206704823814 21.151933114498387 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 5 11.393679170189731 21.052964115212589 2012-Jun-01 19:17:43 LOG4 log_alfabeam: ALFABEAM 6 11.399546516167357 20.985766071620223 2012-Jun-01 19:17:43 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300090 2012-Jun-01 19:17:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:17:43 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2012-Jun-01 19:17:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:17:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:17:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83864.00 2012-Jun-01 19:17:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:17:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:17:54 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2012-Jun-01 19:17:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:17:54 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Jun-01 19:17:54 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2012-Jun-01 19:17:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2012-Jun-01 19:17:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 19:17:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:17:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:17:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:17:54 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Jun-01 19:17:54 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:17:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:17:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:17:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:17:54 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Jun-01 19:17:55 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Jun-01 19:17:55 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Jun-01 19:17:55 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:17:55 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:17:55 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:17:55 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:17:55 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:17:55 LOG2 antvel: Parameters to Doppler: Topocentric 83874 2012 153 0.0 2012-Jun-01 19:17:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:17:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:17:55 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:17:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:17:55 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:17:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:17:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Jun-01 19:17:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:17:55 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Jun-01 19:17:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:17:55 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.570336 2012.421092668644 18.999933 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333343 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 1 11.405790889210003 21.014871734558014 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 2 11.406304521169870 21.111905849506876 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 3 11.400588603383950 21.181738599527684 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 4 11.394151118597858 21.151002336683110 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 5 11.393704436245635 21.051964702454523 2012-Jun-01 19:17:55 LOG4 log_alfabeam: ALFABEAM 6 11.399625430623040 20.985695785750544 2012-Jun-01 19:17:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300091 2012-Jun-01 19:17:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:17:56 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Jun-01 19:17:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:17:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:17:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:17:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:17:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:17:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83877.00 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:17:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:18:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:18:07 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Jun-01 19:18:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:18:07 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Jun-01 19:18:07 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Jun-01 19:18:07 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:18:07 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:18:07 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:18:07 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:18:07 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:18:07 LOG2 antvel: Parameters to Doppler: Topocentric 83887 2012 153 0.0 2012-Jun-01 19:18:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:18:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:18:07 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:18:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:18:07 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:18:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:18:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Jun-01 19:18:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:18:08 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2012-Jun-01 19:18:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:18:08 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.573957 2012.4210930805891 18.999933 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333332 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 1 11.405845821339506 21.015791897195228 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 2 11.406281137656364 21.112910164532302 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 3 11.400508358362574 21.181821542266182 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 4 11.394097307307899 21.150080248597597 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 5 11.393730017998697 21.050987946864730 2012-Jun-01 19:18:08 LOG4 log_alfabeam: ALFABEAM 6 11.399702926105613 20.985638914585810 2012-Jun-01 19:18:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300092 2012-Jun-01 19:18:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:18:08 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Jun-01 19:18:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:18:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:18:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:18:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83889.00 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:18:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:18:19 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Jun-01 19:18:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:18:19 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2012-Jun-01 19:18:19 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Jun-01 19:18:19 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:18:19 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:18:19 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:18:19 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:18:19 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:18:19 LOG2 antvel: Parameters to Doppler: Topocentric 83898 2012 153 0.0 2012-Jun-01 19:18:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:18:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:18:19 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:18:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:18:19 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:18:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:18:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:19 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Jun-01 19:18:19 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:18:19 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Jun-01 19:18:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:18:19 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.577021 2012.421093429158 18.999933 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000029 21.083333333333343 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 1 11.405890941424397 21.016563780797739 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 2 11.406261067480607 21.113742691554496 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 3 11.400441566402076 21.181880731747075 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 4 11.394053122351758 21.149307026825284 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 5 11.393751881786768 21.050178841923771 2012-Jun-01 19:18:20 LOG4 log_alfabeam: ALFABEAM 6 11.399767400724222 20.985600759745882 2012-Jun-01 19:18:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300093 2012-Jun-01 19:18:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:18:20 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2012-Jun-01 19:18:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:18:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:18:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:18:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83901.00 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:18:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:18:31 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2012-Jun-01 19:18:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:18:31 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Jun-01 19:18:31 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Jun-01 19:18:31 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:18:31 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:18:31 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:18:31 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:18:31 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:18:31 LOG2 antvel: Parameters to Doppler: Topocentric 83911 2012 153 0.0 2012-Jun-01 19:18:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:18:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:18:31 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:18:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:18:31 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:18:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:18:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Jun-01 19:18:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:18:32 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Jun-01 19:18:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:18:32 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.580642 2012.4210938411031 18.999933 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333336 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 1 11.405942697754741 21.017467756810561 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 2 11.406237048407494 21.114706441410775 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 3 11.400363934750665 21.181938307309675 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 4 11.394002455077541 21.148401796969218 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 5 11.393777943830541 21.049242856568569 2012-Jun-01 19:18:32 LOG4 log_alfabeam: ALFABEAM 6 11.399842307053001 20.985566866888902 2012-Jun-01 19:18:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300094 2012-Jun-01 19:18:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:18:32 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Jun-01 19:18:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:18:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:18:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:18:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83913.00 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:34 LOG3 WAPP=2+3-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:18:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:18:43 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Jun-01 19:18:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:18:43 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Jun-01 19:18:43 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Jun-01 19:18:43 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:18:43 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:18:43 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:18:43 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:18:43 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:18:43 LOG2 antvel: Parameters to Doppler: Topocentric 83923 2012 153 0.0 2012-Jun-01 19:18:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:18:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:18:43 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:18:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:18:43 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:18:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:18:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Jun-01 19:18:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:18:43 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Jun-01 19:18:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:18:44 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.583984 2012.4210942213601 18.999933 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000022 21.083333333333336 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 1 11.405989001177300 21.018293948711793 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 2 11.406214622217169 21.115576902149694 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 3 11.400293527147255 21.181980111611029 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 4 11.393957141076818 21.147574747801869 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 5 11.393802183627059 21.048398070876765 2012-Jun-01 19:18:44 LOG4 log_alfabeam: ALFABEAM 6 11.399910214115955 20.985545825021475 2012-Jun-01 19:18:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300095 2012-Jun-01 19:18:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:18:44 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Jun-01 19:18:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:18:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:18:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:18:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83925.00 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:18:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:18:55 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Jun-01 19:18:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:18:55 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Jun-01 19:18:55 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Jun-01 19:18:55 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:18:55 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:18:55 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:18:55 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:18:55 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:18:55 LOG2 antvel: Parameters to Doppler: Topocentric 83934 2012 153 0.0 2012-Jun-01 19:18:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:18:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:18:55 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:18:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:18:55 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:18:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:18:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:55 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Jun-01 19:18:55 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:18:55 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2012-Jun-01 19:18:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:18:55 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.587048 2012.4210945699292 18.999933 2012-Jun-01 19:18:55 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333343 2012-Jun-01 19:18:55 LOG4 log_alfabeam: ALFABEAM 1 11.406030250919819 21.019044387998655 2012-Jun-01 19:18:55 LOG4 log_alfabeam: ALFABEAM 2 11.406193868910435 21.116359170646955 2012-Jun-01 19:18:55 LOG4 log_alfabeam: ALFABEAM 3 11.400230015368576 21.182009334914557 2012-Jun-01 19:18:55 LOG4 log_alfabeam: ALFABEAM 4 11.393916785000870 21.146823763303814 2012-Jun-01 19:18:56 LOG4 log_alfabeam: ALFABEAM 5 11.393824540509195 21.047639358844144 2012-Jun-01 19:18:56 LOG4 log_alfabeam: ALFABEAM 6 11.399971447405107 20.985534742252945 2012-Jun-01 19:18:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300096 2012-Jun-01 19:18:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:18:56 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2012-Jun-01 19:18:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:18:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:18:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:18:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:18:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83937.00 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:18:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:19:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:19:07 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2012-Jun-01 19:19:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:19:07 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2012-Jun-01 19:19:07 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Jun-01 19:19:07 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:19:07 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:19:07 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:19:07 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42109 J 2012-Jun-01 19:19:07 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:19:07 LOG2 antvel: Parameters to Doppler: Topocentric 83947 2012 153 0.0 2012-Jun-01 19:19:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:19:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:19:07 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:19:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:19:07 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:19:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:19:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Jun-01 19:19:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:19:08 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2012-Jun-01 19:19:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:19:08 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.590669 2012.4210949818744 18.999933 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 21.083333333333329 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 1 11.406077558101821 21.019922401211126 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 2 11.406169134391476 21.117264518533322 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 3 11.400156227153381 21.182033187821780 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 4 11.393870517169654 21.145945387987485 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 5 11.393851099038949 21.046761842321789 2012-Jun-01 19:19:08 LOG4 log_alfabeam: ALFABEAM 6 11.400042562014802 20.985531259865471 2012-Jun-01 19:19:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300097 2012-Jun-01 19:19:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:19:08 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Jun-01 19:19:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:19:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:19:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:19:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83949.00 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:19:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:19:19 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Jun-01 19:19:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:19:19 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2012-Jun-01 19:19:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Jun-01 19:19:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 19:19:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 19:19:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:19:19 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2012-Jun-01 19:19:19 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:19:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 19:19:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:19:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:19:19 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2012-Jun-01 19:19:19 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Jun-01 19:19:19 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:19:19 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:19:19 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:19:19 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:19:19 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:19:19 LOG2 antvel: Parameters to Doppler: Topocentric 83959 2012 153 0.0 2012-Jun-01 19:19:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:19:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:19:20 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:19:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:19:20 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:19:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:19:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Jun-01 19:19:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:19:20 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Jun-01 19:19:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:19:20 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.594012 2012.4210953621314 18.999933 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333332 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 1 11.406119886066200 21.020724344558101 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 2 11.406146124799021 21.118082292139768 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 3 11.400089312085651 21.182045440063106 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 4 11.393829132493572 21.145143368082657 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 5 11.393875726076505 21.045969730649826 2012-Jun-01 19:19:20 LOG4 log_alfabeam: ALFABEAM 6 11.400107028643916 20.985536821334424 2012-Jun-01 19:19:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300098 2012-Jun-01 19:19:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:19:20 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2012-Jun-01 19:19:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:19:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:19:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:19:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83961.00 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:19:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:19:31 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2012-Jun-01 19:19:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:19:31 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Jun-01 19:19:31 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Jun-01 19:19:31 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:19:31 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:19:31 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:19:31 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:19:31 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:19:31 LOG2 antvel: Parameters to Doppler: Topocentric 83971 2012 153 0.0 2012-Jun-01 19:19:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:19:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:19:31 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:19:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:19:31 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:19:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:19:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Jun-01 19:19:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:19:32 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Jun-01 19:19:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:19:32 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.597354 2012.4210957423884 18.999933 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333329 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 1 11.406160946272076 21.021517607460044 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 2 11.406122979781671 21.118882812204617 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 3 11.400023563104682 21.182048793385711 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 4 11.393788999590290 21.144350262935635 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 5 11.393900426017293 21.045194810025311 2012-Jun-01 19:19:32 LOG4 log_alfabeam: ALFABEAM 6 11.400170350400245 20.985550356729828 2012-Jun-01 19:19:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300099 2012-Jun-01 19:19:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:19:32 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Jun-01 19:19:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:19:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:19:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:19:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83973.00 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:19:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:19:43 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Jun-01 19:19:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:19:43 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Jun-01 19:19:43 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Jun-01 19:19:43 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:19:43 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:19:43 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:19:43 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:19:43 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:19:43 LOG2 antvel: Parameters to Doppler: Topocentric 83982 2012 153 0.0 2012-Jun-01 19:19:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:19:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:19:43 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:19:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:19:43 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:19:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:19:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:43 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Jun-01 19:19:43 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:19:43 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Jun-01 19:19:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:19:44 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.600418 2012.4210960909575 18.999933 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 0 11.399999999999999 21.083333333333343 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 1 11.406197519119534 21.022237377328715 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 2 11.406101654453298 21.119602074256086 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 3 11.399964278597880 21.182044436830967 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 4 11.393753263065756 21.143630833052207 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 5 11.393923123919041 21.044498951735651 2012-Jun-01 19:19:44 LOG4 log_alfabeam: ALFABEAM 6 11.400227428619447 20.985569416301146 2012-Jun-01 19:19:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300100 2012-Jun-01 19:19:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:19:44 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Jun-01 19:19:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:19:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:19:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:19:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83985.00 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:19:55 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:19:55 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Jun-01 19:19:55 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:19:55 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Jun-01 19:19:55 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Jun-01 19:19:55 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:19:55 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:19:55 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:19:55 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:19:55 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:19:55 LOG2 antvel: Parameters to Doppler: Topocentric 83995 2012 153 0.0 2012-Jun-01 19:19:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:19:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:19:55 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:19:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:19:55 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:19:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:19:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Jun-01 19:19:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:19:56 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2012-Jun-01 19:19:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:19:56 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.604039 2012.4210965029026 18.999933 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333343 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 1 11.406239457062485 21.023078639581954 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 2 11.406076345464127 21.120434351840636 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 3 11.399895428758638 21.182030592604310 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 4 11.393712296383718 21.142790200680231 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 5 11.393949991520023 21.043694229588539 2012-Jun-01 19:19:56 LOG4 log_alfabeam: ALFABEAM 6 11.400293695746615 20.985599707250547 2012-Jun-01 19:19:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300101 2012-Jun-01 19:19:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:19:56 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Jun-01 19:19:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:19:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:19:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:19:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:19:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83997.00 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:19:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:20:07 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:20:07 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Jun-01 19:20:07 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:20:07 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2012-Jun-01 19:20:07 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Jun-01 19:20:07 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:20:07 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:20:07 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:20:07 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:20:07 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:20:07 LOG2 antvel: Parameters to Doppler: Topocentric 84006 2012 153 0.0 2012-Jun-01 19:20:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:20:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:20:07 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:20:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:20:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:20:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:20:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Jun-01 19:20:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:20:07 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Jun-01 19:20:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:20:08 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.607103 2012.4210968514715 18.999933 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333343 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 1 11.406273888878260 21.023782515584720 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 2 11.406054857202228 21.121123884434990 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 3 11.399838182022304 21.182011890713216 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 4 11.393678671965192 21.142087040491909 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 5 11.393972746468707 21.043027910567719 2012-Jun-01 19:20:08 LOG4 log_alfabeam: ALFABEAM 6 11.400348778788782 20.985631567066516 2012-Jun-01 19:20:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300102 2012-Jun-01 19:20:08 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:20:08 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Jun-01 19:20:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:20:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:20:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:20:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84009.00 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:20:19 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:20:19 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Jun-01 19:20:19 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:20:19 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Jun-01 19:20:19 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Jun-01 19:20:19 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:20:19 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:20:19 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:20:19 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:20:19 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:20:19 LOG2 antvel: Parameters to Doppler: Topocentric 84019 2012 153 0.0 2012-Jun-01 19:20:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:20:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:20:19 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:20:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:20:19 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:20:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:20:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Jun-01 19:20:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:20:20 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Jun-01 19:20:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:20:20 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.610724 2012.4210972634166 18.999933 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333343 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 1 11.406313371074297 21.024604855356522 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 2 11.406029398314883 21.121921731928879 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 3 11.399771707761788 21.181981976532690 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 4 11.393640126892814 21.141265750479302 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 5 11.393999642564701 21.042257356174453 2012-Jun-01 19:20:20 LOG4 log_alfabeam: ALFABEAM 6 11.400412722670978 20.985676167734038 2012-Jun-01 19:20:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300103 2012-Jun-01 19:20:20 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:20:20 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Jun-01 19:20:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:20:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:20:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:20:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84021.00 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:20:31 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:20:31 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Jun-01 19:20:31 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:20:31 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Jun-01 19:20:31 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Jun-01 19:20:31 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:20:31 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:20:31 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:20:31 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:20:31 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:20:31 LOG2 antvel: Parameters to Doppler: Topocentric 84031 2012 153 0.0 2012-Jun-01 19:20:31 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:20:31 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:20:31 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:20:31 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:20:31 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:20:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:20:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:31 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Jun-01 19:20:31 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:20:31 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2012-Jun-01 19:20:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:20:32 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.614066 2012.4210976436736 18.999933 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333332 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 1 11.406348683610297 21.025354664135474 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 2 11.406005857941086 21.122642066845586 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 3 11.399711472691088 21.181947255911286 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 4 11.393605662947840 21.140517095511580 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 5 11.394024453735465 21.041562060524804 2012-Jun-01 19:20:32 LOG4 log_alfabeam: ALFABEAM 6 11.400470648746492 20.985723643803766 2012-Jun-01 19:20:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300104 2012-Jun-01 19:20:32 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:20:32 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2012-Jun-01 19:20:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:20:32 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:20:32 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:20:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84033.00 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:20:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:20:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:20:43 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2012-Jun-01 19:20:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:20:43 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2012-Jun-01 19:20:43 INFO2 smartfreq: Switching off CAL 2012-Jun-01 19:20:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:20:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:20:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:20:43 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2012-Jun-01 19:20:43 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:20:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:20:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:20:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:20:43 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2012-Jun-01 19:20:43 INFO3 restore_frequencies: Restoring original frequencies 2012-Jun-01 19:20:43 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:20:43 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:20:43 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:20:43 LOG2 antvel: Parameters to Doppler: Topocentric 84043 2012 153 0.0 2012-Jun-01 19:20:43 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:20:43 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Jun-01 19:20:43 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2012-Jun-01 19:20:43 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:20:43 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:20:43 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Jun-01 19:20:43 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:43 STOP finish_task: Finishing task 'smart frequency switching' 2012-Jun-01 19:20:44 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Jun-01 19:20:44 DONE finish_task: DONE finished pattern: smart frequency switching 2012-Jun-01 19:20:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:20:44 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2012-Jun-01 19:20:44 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Jun-01 19:20:44 COMMAND run_command_line: EXECUTING command 27: 'IF LSTSLEW(AGES1367_p3_011) < 112439 THEN' 2012-Jun-01 19:20:44 ERROR read_source: ERROR source 'AGES1367_p3_011' does not exist in catalog '/share/obs4/usr/a2048/togs_ages.cat'! 2012-Jun-01 19:20:44 ERROR is_if_valid: ERROR failed to find source 'AGES1367_p3_011' for function 'LSTSLEW(AGES1367_p3_011)'! 2012-Jun-01 19:20:44 LOG1 task_failed: Task 'running command file '120601.cmd'' failed! 2012-Jun-01 19:20:44 LOG5 task_failed: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Jun-01 19:20:44 ALERT run_command_file: Stopping command file processing at line 27! 2012-Jun-01 19:20:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2012-Jun-01 19:20:44 STOP finish_task: Finishing task 'running command file '120601.cmd'' 2012-Jun-01 19:20:44 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2012-Jun-01 19:20:44 ERROR finish_task: ERROR failed running: command file '120601.cmd' 2012-Jun-01 19:20:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2012-Jun-01 19:20:44 END end_task: Finishing task 'running command file '120601.cmd'' with status 'FAILED' 2012-Jun-01 19:20:44 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 1 failed 2012-Jun-01 19:20:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Jun-01 19:20:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:20:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:06 COMMAND CIMA-send_to_exec: Sending command to run smart frequency switching 2012-Jun-01 19:21:06 LOG4 exec_msg: From OBSERVER: smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660} 2012-Jun-01 19:21:06 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Jun-01 19:21:06 BEGIN begin_task: Starting task 'smart frequency switching' 2012-Jun-01 19:21:06 LOG5 begin_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2012-Jun-01 19:21:06 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2012-Jun-01 19:21:06 INFO1 smartfreq: Starting pattern: Smart frequency switching 2012-Jun-01 19:21:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2012-Jun-01 19:21:06 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 19:21:06 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2012-Jun-01 19:21:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 19:21:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 19:21:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:21:06 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 19:21:06 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Jun-01 19:21:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 19:21:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:21:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:06 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:21:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 19:21:06 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Jun-01 19:21:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 19:21:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:21:06 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 19:21:06 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:21:06 LOG5 begin_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2012-Jun-01 19:21:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:07 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:21:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:21:07 LOG5 end_task: Level: (3) ID = <10093> Status = 0 0 0 0 ok 2012-Jun-01 19:21:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:21:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 19:21:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:21:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:21:07 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:21:07 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Jun-01 19:21:07 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:21:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:21:07 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Jun-01 19:21:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:21:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:21:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 19:21:07 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2012-Jun-01 19:21:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 19:21:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 19:21:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 19:21:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 19:21:08 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2012-Jun-01 19:21:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jun-01 19:21:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 19:21:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:21:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:21:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:21:08 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2012-Jun-01 19:21:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 19:21:08 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:21:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:21:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:21:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:21:08 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2012-Jun-01 19:21:08 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Jun-01 19:21:08 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:21:08 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2012-Jun-01 19:21:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Jun-01 19:21:08 INFO2 adjust_power: Starting to adjust WAPP power 2012-Jun-01 19:21:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jun-01 19:21:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jun-01 19:21:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:21:08 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jun-01 19:21:08 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Jun-01 19:21:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jun-01 19:21:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:21:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:08 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:21:08 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jun-01 19:21:08 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Jun-01 19:21:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jun-01 19:21:08 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:21:08 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2012-Jun-01 19:21:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jun-01 19:21:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:21:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:21:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:21:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:21:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jun-01 19:21:09 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2012-Jun-01 19:21:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20120601.a2048.0001.fits 2012-Jun-01 19:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jun-01 19:21:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120601.a2048.0001.fits} 2012-Jun-01 19:21:09 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 5 7 dB 2012-Jun-01 19:21:09 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 9 5 dB --- beam 3: 7 3 dB 2012-Jun-01 19:21:09 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 7 7 dB --- beam 5: 9 6 dB 2012-Jun-01 19:21:09 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 9 4 dB --- beam 7: 9 4 dB 2012-Jun-01 19:21:09 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jun-01 19:21:09 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jun-01 19:21:09 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2012-Jun-01 19:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.930 0.934 ALFA beam 1: 0.980 1.050 2012-Jun-01 19:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.005 0.967 ALFA beam 3: 1.046 1.122 2012-Jun-01 19:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.104 1.033 ALFA beam 5: 0.899 0.941 2012-Jun-01 19:21:09 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.010 0.870 ALFA beam 7: 1.123 1.048 2012-Jun-01 19:21:09 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:21:09 LOG5 finish_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2012-Jun-01 19:21:09 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jun-01 19:21:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:21:09 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:21:09 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2012-Jun-01 19:21:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 19:21:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:21:10 LOG5 finish_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2012-Jun-01 19:21:10 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Jun-01 19:21:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:21:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:21:10 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2012-Jun-01 19:21:10 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Jun-01 19:21:10 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:21:10 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:21:10 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:21:10 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:21:10 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:21:10 LOG2 antvel: Parameters to Doppler: Topocentric 84069 2012 153 0.0 2012-Jun-01 19:21:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:21:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:21:10 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:21:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:21:10 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:21:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:21:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Jun-01 19:21:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:21:10 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2012-Jun-01 19:21:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:21:10 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.624651 2012.421098847821 18.999933 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 21.083333333333336 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 1 11.406453755300999 21.027671171109116 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 2 11.405931214862434 21.124825671051795 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 3 11.399527583379337 21.181796384102295 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 4 11.393503176628240 21.138205299957523 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 5 11.394102788168347 21.039456652821244 2012-Jun-01 19:21:10 LOG4 log_alfabeam: ALFABEAM 6 11.400647399372637 20.985910177587346 2012-Jun-01 19:21:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300105 2012-Jun-01 19:21:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:21:11 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Jun-01 19:21:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:21:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:21:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:21:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84072.00 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:21:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:21:22 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Jun-01 19:21:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:21:22 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2012-Jun-01 19:21:22 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Jun-01 19:21:22 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:21:22 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:21:22 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:21:22 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:21:22 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:21:22 LOG2 antvel: Parameters to Doppler: Topocentric 84082 2012 153 0.0 2012-Jun-01 19:21:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:21:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:21:22 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:21:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:21:22 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:21:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:21:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Jun-01 19:21:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:21:23 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2012-Jun-01 19:21:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:21:23 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.628272 2012.4210992597662 18.999933 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000020 21.083333333333332 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 1 11.406487460157251 21.028443252415485 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 2 11.405905710372311 21.125539778993708 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 3 11.399467014912791 21.181731852377801 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 4 11.393470320984655 21.137435161792570 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 5 11.394129445501674 21.038768861603412 2012-Jun-01 19:21:23 LOG4 log_alfabeam: ALFABEAM 6 11.400705588640252 20.985985364889654 2012-Jun-01 19:21:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300106 2012-Jun-01 19:21:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:21:23 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Jun-01 19:21:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:21:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:21:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:21:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84084.00 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:21:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:21:34 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Jun-01 19:21:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:21:34 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2012-Jun-01 19:21:34 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Jun-01 19:21:34 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:21:34 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:21:34 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:21:34 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:21:34 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:21:34 LOG2 antvel: Parameters to Doppler: Topocentric 84093 2012 153 0.0 2012-Jun-01 19:21:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:21:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:21:34 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:21:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:21:34 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:21:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:21:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Jun-01 19:21:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:21:34 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2012-Jun-01 19:21:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:21:34 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.631336 2012.4210996083352 18.999933 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333343 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 1 11.406515135665847 21.029088479244457 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 2 11.405884162099619 21.126131442581087 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 3 11.399416667730785 21.181672597638940 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 4 11.393443350272818 21.136791697462630 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 5 11.394151927974377 21.038199278505978 2012-Jun-01 19:21:35 LOG4 log_alfabeam: ALFABEAM 6 11.400753948217343 20.986053062351228 2012-Jun-01 19:21:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300107 2012-Jun-01 19:21:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:21:35 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Jun-01 19:21:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:21:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:21:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:21:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84096.00 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:21:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:21:46 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Jun-01 19:21:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:21:46 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2012-Jun-01 19:21:46 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Jun-01 19:21:46 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:21:46 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:21:46 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:21:46 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:21:46 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:21:46 LOG2 antvel: Parameters to Doppler: Topocentric 84106 2012 153 0.0 2012-Jun-01 19:21:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:21:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:21:46 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:21:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:21:46 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:21:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:21:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Jun-01 19:21:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:21:47 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Jun-01 19:21:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:21:47 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.634957 2012.4211000202804 18.999933 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333332 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 1 11.406546875650065 21.029841472351723 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 2 11.405858748920126 21.126816119441308 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 3 11.399358217859360 21.181597401673990 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 4 11.393412427106851 21.136040918004639 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 5 11.394178398043488 21.037540464618548 2012-Jun-01 19:21:47 LOG4 log_alfabeam: ALFABEAM 6 11.400810079723616 20.986137585385617 2012-Jun-01 19:21:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300108 2012-Jun-01 19:21:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:21:47 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Jun-01 19:21:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:21:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:21:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:21:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84108.00 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=2-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:49 LOG3 WAPP=2-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:21:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:21:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:21:58 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Jun-01 19:21:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:21:58 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Jun-01 19:21:58 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Jun-01 19:21:58 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:21:58 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:21:58 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:21:58 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:21:58 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:21:58 LOG2 antvel: Parameters to Doppler: Topocentric 84118 2012 153 0.0 2012-Jun-01 19:21:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:21:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:21:58 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:21:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:21:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:21:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:21:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Jun-01 19:21:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:21:58 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2012-Jun-01 19:21:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:21:59 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.638299 2012.4211004005374 18.999933 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333325 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 1 11.406575269585268 21.030527324732521 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 2 11.405835355749252 21.127434375484707 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 3 11.399305263121507 21.181523320681283 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 4 11.393384771763014 21.135357226358533 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 5 11.394202722888746 21.036945848549045 2012-Jun-01 19:21:59 LOG4 log_alfabeam: ALFABEAM 6 11.400860924318362 20.986219674533487 2012-Jun-01 19:21:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300109 2012-Jun-01 19:21:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:21:59 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Jun-01 19:21:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:21:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:21:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84120.00 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:22:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:22:10 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Jun-01 19:22:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:22:10 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2012-Jun-01 19:22:10 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Jun-01 19:22:10 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:22:10 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:22:10 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:22:10 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:22:10 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:22:10 LOG2 antvel: Parameters to Doppler: Topocentric 84129 2012 153 0.0 2012-Jun-01 19:22:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:22:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:22:10 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:22:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:22:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:22:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:22:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Jun-01 19:22:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:22:10 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2012-Jun-01 19:22:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:22:10 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.641363 2012.4211007491062 18.999933 2012-Jun-01 19:22:10 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333336 2012-Jun-01 19:22:10 LOG4 log_alfabeam: ALFABEAM 1 11.406600565688002 21.031148469470171 2012-Jun-01 19:22:10 LOG4 log_alfabeam: ALFABEAM 2 11.405813969861327 21.127989938339802 2012-Jun-01 19:22:10 LOG4 log_alfabeam: ALFABEAM 3 11.399257534752342 21.181451689774526 2012-Jun-01 19:22:11 LOG4 log_alfabeam: ALFABEAM 4 11.393360140083738 21.134738155368165 2012-Jun-01 19:22:11 LOG4 log_alfabeam: ALFABEAM 5 11.394224927284663 21.036411759226173 2012-Jun-01 19:22:11 LOG4 log_alfabeam: ALFABEAM 6 11.400906743160931 20.986298161611021 2012-Jun-01 19:22:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300110 2012-Jun-01 19:22:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:22:11 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Jun-01 19:22:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:22:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:22:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:22:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84132.00 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:22:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:22:22 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Jun-01 19:22:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:22:22 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2012-Jun-01 19:22:22 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Jun-01 19:22:22 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:22:22 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:22:22 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:22:22 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:22:22 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:22:22 LOG2 antvel: Parameters to Doppler: Topocentric 84142 2012 153 0.0 2012-Jun-01 19:22:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:22:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:22:22 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:22:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:22:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:22:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Jun-01 19:22:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:22:23 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2012-Jun-01 19:22:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:22:23 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.644984 2012.4211011610514 18.999933 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000016 21.083333333333332 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 1 11.406629581016020 21.031873144595455 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 2 11.405788782383198 21.128632923169004 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 3 11.399202124511374 21.181362734613408 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 4 11.393331894482262 21.134016037739606 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 5 11.394251039596968 21.035793898682289 2012-Jun-01 19:22:23 LOG4 log_alfabeam: ALFABEAM 6 11.400959927783830 20.986394644569934 2012-Jun-01 19:22:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300111 2012-Jun-01 19:22:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:22:23 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Jun-01 19:22:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:22:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84144.00 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:22:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:22:34 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Jun-01 19:22:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:22:34 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2012-Jun-01 19:22:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Jun-01 19:22:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 19:22:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 19:22:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:22:34 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2012-Jun-01 19:22:34 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:22:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 19:22:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:22:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:22:34 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2012-Jun-01 19:22:34 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Jun-01 19:22:34 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:22:34 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:22:34 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:22:34 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:22:34 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:22:34 LOG2 antvel: Parameters to Doppler: Topocentric 84154 2012 153 0.0 2012-Jun-01 19:22:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:22:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:22:35 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:22:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:22:35 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:22:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:22:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Jun-01 19:22:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:22:35 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2012-Jun-01 19:22:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:22:35 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.648327 2012.4211015413086 18.999933 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333343 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 1 11.406655549422357 21.032533215194707 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 2 11.405765620818265 21.129213791092930 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 3 11.399151907283510 21.181276723824677 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 4 11.393306622034189 21.133358423983459 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 5 11.394275015567780 21.035235977662797 2012-Jun-01 19:22:35 LOG4 log_alfabeam: ALFABEAM 6 11.401008120161688 20.986487075162778 2012-Jun-01 19:22:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300112 2012-Jun-01 19:22:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:22:35 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2012-Jun-01 19:22:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:22:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:22:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:22:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84156.00 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:22:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:22:46 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2012-Jun-01 19:22:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:22:46 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2012-Jun-01 19:22:46 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Jun-01 19:22:46 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:22:46 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:22:46 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:22:46 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:22:46 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:22:46 LOG2 antvel: Parameters to Doppler: Topocentric 84166 2012 153 0.0 2012-Jun-01 19:22:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:22:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:22:46 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:22:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:22:46 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:22:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:22:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Jun-01 19:22:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:22:47 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2012-Jun-01 19:22:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:22:47 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.651669 2012.4211019215657 18.999933 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 21.083333333333329 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 1 11.406680749103991 21.033184546790935 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 2 11.405742563155385 21.129782540184763 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 3 11.399102588813591 21.181187248351208 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 4 11.393282104241475 21.132709633766154 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 5 11.394298850921675 21.034689925666427 2012-Jun-01 19:22:47 LOG4 log_alfabeam: ALFABEAM 6 11.401055443078651 20.986582481507483 2012-Jun-01 19:22:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300113 2012-Jun-01 19:22:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:22:47 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Jun-01 19:22:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:22:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:22:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:22:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84168.00 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:22:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:22:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:22:58 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Jun-01 19:22:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:22:58 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2012-Jun-01 19:22:58 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Jun-01 19:22:58 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:22:58 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:22:58 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:22:58 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:22:58 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:22:58 LOG2 antvel: Parameters to Doppler: Topocentric 84178 2012 153 0.0 2012-Jun-01 19:22:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:22:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:22:58 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:22:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:22:58 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:22:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:22:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Jun-01 19:22:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:22:58 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2012-Jun-01 19:22:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:22:59 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.655012 2012.4211023018227 18.999826 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000015 21.083333333333332 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 1 11.406705223910107 21.033827750511467 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 2 11.405719595119884 21.130339950117683 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 3 11.399054109376708 21.181094477846703 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 4 11.393258297636777 21.132069044330674 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 5 11.394322562102507 21.034154976929543 2012-Jun-01 19:22:59 LOG4 log_alfabeam: ALFABEAM 6 11.401101954854713 20.986680720862747 2012-Jun-01 19:22:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300114 2012-Jun-01 19:22:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:22:59 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Jun-01 19:22:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:22:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:22:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:22:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:22:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84180.00 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:23:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:23:10 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Jun-01 19:23:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:23:10 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2012-Jun-01 19:23:10 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Jun-01 19:23:10 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:23:10 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:23:10 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:23:10 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:23:10 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:23:10 LOG2 antvel: Parameters to Doppler: Topocentric 84189 2012 153 0.0 2012-Jun-01 19:23:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:23:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:23:10 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:23:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:23:10 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:23:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:23:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Jun-01 19:23:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:23:10 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2012-Jun-01 19:23:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:23:10 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.658076 2012.4211026503915 18.999933 2012-Jun-01 19:23:10 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000000 21.083333333333343 2012-Jun-01 19:23:10 LOG4 log_alfabeam: ALFABEAM 1 11.406727018751935 21.034409596929272 2012-Jun-01 19:23:10 LOG4 log_alfabeam: ALFABEAM 2 11.405698657562224 21.130840517434454 2012-Jun-01 19:23:10 LOG4 log_alfabeam: ALFABEAM 3 11.399010449421429 21.181006751163714 2012-Jun-01 19:23:10 LOG4 log_alfabeam: ALFABEAM 4 11.393237103904358 21.131489672218056 2012-Jun-01 19:23:11 LOG4 log_alfabeam: ALFABEAM 5 11.394344150142787 21.033674769048922 2012-Jun-01 19:23:11 LOG4 log_alfabeam: ALFABEAM 6 11.401143836799585 20.986773060895462 2012-Jun-01 19:23:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300115 2012-Jun-01 19:23:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:23:11 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Jun-01 19:23:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:23:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:23:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:23:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84192.00 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:23:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:23:22 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Jun-01 19:23:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:23:22 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2012-Jun-01 19:23:22 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Jun-01 19:23:22 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:23:22 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:23:22 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:23:22 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:23:22 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:23:22 LOG2 antvel: Parameters to Doppler: Topocentric 84202 2012 153 0.0 2012-Jun-01 19:23:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:23:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:23:22 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:23:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:23:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:23:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:23:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Jun-01 19:23:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:23:23 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2012-Jun-01 19:23:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:23:23 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.661697 2012.4211030623367 18.999933 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000020 21.083333333333343 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 1 11.406752031494811 21.035088376582127 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 2 11.405674032092181 21.131420212017396 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 3 11.398959740740676 21.180899975674226 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 4 11.393212786956044 21.130813882060988 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 5 11.394369509351485 21.033118866414615 2012-Jun-01 19:23:23 LOG4 log_alfabeam: ALFABEAM 6 11.401192474887662 20.986884827542607 2012-Jun-01 19:23:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300116 2012-Jun-01 19:23:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:23:23 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2012-Jun-01 19:23:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:23:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:23:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:23:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84204.00 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=2+3-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:25 LOG3 WAPP=2+3-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:23:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:23:34 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2012-Jun-01 19:23:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:23:34 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2012-Jun-01 19:23:34 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Jun-01 19:23:34 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:23:34 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:23:34 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:23:34 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:23:34 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:23:34 LOG2 antvel: Parameters to Doppler: Topocentric 84214 2012 153 0.0 2012-Jun-01 19:23:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:23:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:23:34 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:23:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:23:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:23:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:23:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Jun-01 19:23:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:23:34 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2012-Jun-01 19:23:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:23:35 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.665039 2012.4211034425939 18.999933 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333343 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 1 11.406774418681705 21.035706268038133 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 2 11.405651433255434 21.131943922885799 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 3 11.398913791353477 21.180798641858313 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 4 11.393191028445107 21.130198815209631 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 5 11.394392752506754 21.032616849324729 2012-Jun-01 19:23:35 LOG4 log_alfabeam: ALFABEAM 6 11.401236542721986 20.986990340512399 2012-Jun-01 19:23:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300117 2012-Jun-01 19:23:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:23:35 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Jun-01 19:23:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:23:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:23:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:23:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84216.00 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:23:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:23:46 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2012-Jun-01 19:23:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:23:46 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2012-Jun-01 19:23:46 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Jun-01 19:23:46 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:23:46 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:23:46 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:23:46 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:23:46 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:23:46 LOG2 antvel: Parameters to Doppler: Topocentric 84225 2012 153 0.0 2012-Jun-01 19:23:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:23:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:23:46 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:23:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:23:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:23:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:23:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Jun-01 19:23:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:23:46 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2012-Jun-01 19:23:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:23:46 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.668103 2012.4211037911627 18.999933 2012-Jun-01 19:23:46 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333336 2012-Jun-01 19:23:46 LOG4 log_alfabeam: ALFABEAM 1 11.406794373134858 21.036265591109025 2012-Jun-01 19:23:46 LOG4 log_alfabeam: ALFABEAM 2 11.405630828120348 21.132414750202877 2012-Jun-01 19:23:46 LOG4 log_alfabeam: ALFABEAM 3 11.398872368836400 21.180703547670493 2012-Jun-01 19:23:46 LOG4 log_alfabeam: ALFABEAM 4 11.393171639182693 21.129642132619537 2012-Jun-01 19:23:47 LOG4 log_alfabeam: ALFABEAM 5 11.394413921630111 21.032165686279821 2012-Jun-01 19:23:47 LOG4 log_alfabeam: ALFABEAM 6 11.401276264934115 20.987088921166546 2012-Jun-01 19:23:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300118 2012-Jun-01 19:23:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:23:47 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Jun-01 19:23:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:23:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:23:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:23:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:23:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84228.00 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:23:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:23:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:23:58 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Jun-01 19:23:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:23:58 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2012-Jun-01 19:23:58 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2012-Jun-01 19:23:58 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2012-Jun-01 19:23:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 19:23:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:23:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:23:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:23:58 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2012-Jun-01 19:23:58 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:23:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:23:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:23:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:23:58 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2012-Jun-01 19:23:59 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Jun-01 19:23:59 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Jun-01 19:23:59 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:23:59 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:23:59 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:23:59 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:23:59 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:23:59 LOG2 antvel: Parameters to Doppler: Topocentric 84238 2012 153 0.0 2012-Jun-01 19:23:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:23:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:23:59 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:23:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:23:59 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:23:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:23:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:23:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Jun-01 19:23:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:23:59 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2012-Jun-01 19:23:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:23:59 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.671724 2012.4211042031079 18.999933 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333332 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 1 11.406817273639499 21.036917844643181 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 2 11.405606623066154 21.132959949434596 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 3 11.398824267935954 21.180588653286470 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 4 11.393149393066608 21.128993057160336 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 5 11.394438761429273 21.031643447378777 2012-Jun-01 19:23:59 LOG4 log_alfabeam: ALFABEAM 6 11.401322386724841 20.987207528654398 2012-Jun-01 19:23:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300119 2012-Jun-01 19:24:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:24:00 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2012-Jun-01 19:24:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:24:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:24:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Jun-01 19:24:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84241.00 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:24:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:24:11 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2012-Jun-01 19:24:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:24:11 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2012-Jun-01 19:24:11 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Jun-01 19:24:11 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:24:11 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:24:11 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:24:11 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:24:11 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:24:11 LOG2 antvel: Parameters to Doppler: Topocentric 84251 2012 153 0.0 2012-Jun-01 19:24:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:24:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:24:11 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:24:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:24:11 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:24:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:24:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Jun-01 19:24:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:24:12 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2012-Jun-01 19:24:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:24:12 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.675345 2012.4211046150531 18.999933 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 21.083333333333343 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 1 11.406839459760318 21.037560729384190 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 2 11.405582581551661 21.133493293291714 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 3 11.398777070821012 21.180471234533513 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 4 11.393127846939974 21.128353407483381 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 5 11.394463404564052 21.031132761030275 2012-Jun-01 19:24:12 LOG4 log_alfabeam: ALFABEAM 6 11.401367637281457 20.987328239106688 2012-Jun-01 19:24:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300120 2012-Jun-01 19:24:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:24:12 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2012-Jun-01 19:24:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:24:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:24:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Jun-01 19:24:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84253.00 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:24:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:24:23 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2012-Jun-01 19:24:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:24:23 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2012-Jun-01 19:24:23 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Jun-01 19:24:23 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:24:23 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:24:23 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:24:23 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42110 J 2012-Jun-01 19:24:23 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:24:23 LOG2 antvel: Parameters to Doppler: Topocentric 84263 2012 153 0.0 2012-Jun-01 19:24:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:24:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:24:23 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:24:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:24:23 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:24:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:24:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Jun-01 19:24:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:24:23 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2012-Jun-01 19:24:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:24:23 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.678687 2012.4211049953101 18.999933 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333343 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 1 11.406859323505856 21.038145866791481 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 2 11.405560542142945 21.133975288295730 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 3 11.398734295265713 21.180360794447708 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 4 11.393108561360197 21.127771301791061 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 5 11.394485970982290 21.030671408617092 2012-Jun-01 19:24:24 LOG4 log_alfabeam: ALFABEAM 6 11.401408644884519 20.987441360562915 2012-Jun-01 19:24:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300121 2012-Jun-01 19:24:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:24:24 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Jun-01 19:24:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:24:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:24:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Jun-01 19:24:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84265.00 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:24:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:24:35 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2012-Jun-01 19:24:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:24:35 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2012-Jun-01 19:24:35 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Jun-01 19:24:35 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:24:35 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:24:35 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:24:35 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:24:35 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:24:35 LOG2 antvel: Parameters to Doppler: Topocentric 84275 2012 153 0.0 2012-Jun-01 19:24:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:24:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:24:35 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:24:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:24:35 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:24:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:24:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Jun-01 19:24:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:24:36 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2012-Jun-01 19:24:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:24:36 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.682030 2012.4211053755671 18.999933 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333329 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 1 11.406878623566550 21.038723388694017 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 2 11.405538643753159 21.134447822488752 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 3 11.398692245120179 21.180248487025494 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 4 11.393089827857745 21.127196852485795 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 5 11.394508370432719 21.030219264687343 2012-Jun-01 19:24:36 LOG4 log_alfabeam: ALFABEAM 6 11.401448953771293 20.987556023088118 2012-Jun-01 19:24:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300122 2012-Jun-01 19:24:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:24:36 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2012-Jun-01 19:24:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:24:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:24:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Jun-01 19:24:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84277.00 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:24:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:24:47 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2012-Jun-01 19:24:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:24:47 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2012-Jun-01 19:24:47 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Jun-01 19:24:47 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:24:47 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:24:47 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:24:47 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:24:47 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:24:47 LOG2 antvel: Parameters to Doppler: Topocentric 84287 2012 153 0.0 2012-Jun-01 19:24:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:24:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:24:47 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:24:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:24:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:24:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:24:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Jun-01 19:24:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:24:47 LOG5 begin_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2012-Jun-01 19:24:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:24:47 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.685372 2012.4211057558241 18.999933 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333346 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 1 11.406897366268964 21.039293045196413 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 2 11.405516902854172 21.134910843968683 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 3 11.398650930535869 21.180134520022872 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 4 11.393071639999626 21.126630303832908 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 5 11.394530587110838 21.029776369237805 2012-Jun-01 19:24:48 LOG4 log_alfabeam: ALFABEAM 6 11.401488554557123 20.987672031996969 2012-Jun-01 19:24:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300123 2012-Jun-01 19:24:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:24:48 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2012-Jun-01 19:24:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:24:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:24:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:24:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Jun-01 19:24:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84289.00 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:24:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:24:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:24:59 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2012-Jun-01 19:24:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:24:59 LOG5 end_task: Level: (2) ID = <10138> Status = 0 0 0 0 ok 2012-Jun-01 19:24:59 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Jun-01 19:24:59 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:24:59 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:24:59 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:24:59 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:24:59 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:24:59 LOG2 antvel: Parameters to Doppler: Topocentric 84299 2012 153 0.0 2012-Jun-01 19:24:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:24:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:24:59 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:24:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:24:59 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:24:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:24:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Jun-01 19:25:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:25:00 LOG5 begin_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2012-Jun-01 19:25:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:25:00 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.688715 2012.4211061360813 18.999933 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000013 21.083333333333329 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 1 11.406915580132198 21.039855274223317 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 2 11.405495309460365 21.135364855391813 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 3 11.398610312015080 21.180018958840179 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 4 11.393053969830063 21.126071216175191 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 5 11.394552632222073 21.029342232238236 2012-Jun-01 19:25:00 LOG4 log_alfabeam: ALFABEAM 6 11.401527485424579 20.987789337036311 2012-Jun-01 19:25:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300124 2012-Jun-01 19:25:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:25:00 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2012-Jun-01 19:25:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:25:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:25:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Jun-01 19:25:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84301.00 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:25:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:25:11 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2012-Jun-01 19:25:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:25:11 LOG5 end_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2012-Jun-01 19:25:11 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Jun-01 19:25:11 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:25:11 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:25:11 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:25:11 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:25:11 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:25:11 LOG2 antvel: Parameters to Doppler: Topocentric 84310 2012 153 0.0 2012-Jun-01 19:25:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:25:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:25:11 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:25:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:25:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:25:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:25:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Jun-01 19:25:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:25:11 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2012-Jun-01 19:25:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:25:11 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.691779 2012.4211064846502 18.999933 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333332 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 1 11.406931818736863 21.040363990317871 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 2 11.405475655804723 21.135773127776215 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 3 11.398573693321445 21.179911780226309 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 4 11.393038219798962 21.125565404998092 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 5 11.394572679406441 21.028951950008196 2012-Jun-01 19:25:12 LOG4 log_alfabeam: ALFABEAM 6 11.401562580472380 20.987897863054716 2012-Jun-01 19:25:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300125 2012-Jun-01 19:25:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:25:12 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Jun-01 19:25:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:25:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:25:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Jun-01 19:25:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84313.00 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:25:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:25:23 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Jun-01 19:25:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:25:23 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2012-Jun-01 19:25:23 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Jun-01 19:25:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 19:25:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 19:25:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:25:23 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2012-Jun-01 19:25:23 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:25:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 19:25:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:25:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:25:23 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2012-Jun-01 19:25:23 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Jun-01 19:25:23 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:25:24 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Jun-01 19:25:24 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:25:24 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:25:24 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:25:24 LOG2 antvel: Parameters to Doppler: Topocentric 84323 2012 153 0.0 2012-Jun-01 19:25:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:25:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Jun-01 19:25:24 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Jun-01 19:25:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:25:24 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:25:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:25:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Jun-01 19:25:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:25:24 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2012-Jun-01 19:25:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:25:24 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.695400 2012.4211068965953 18.999933 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000022 21.083333333333336 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 1 11.406950465637559 21.040957165946903 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 2 11.405452601604756 21.136246175145370 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 3 11.398531154326461 21.179783692372361 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 4 11.393020138520059 21.124975690593665 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 5 11.394596174355490 21.028499886202038 2012-Jun-01 19:25:24 LOG4 log_alfabeam: ALFABEAM 6 11.401603347058252 20.988027247801252 2012-Jun-01 19:25:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300126 2012-Jun-01 19:25:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:25:25 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2012-Jun-01 19:25:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:25:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Jun-01 19:25:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Jun-01 19:25:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84326.00 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:25:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:25:36 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2012-Jun-01 19:25:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:25:36 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2012-Jun-01 19:25:36 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Jun-01 19:25:36 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:25:36 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Jun-01 19:25:36 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:25:36 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:25:36 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:25:36 LOG2 antvel: Parameters to Doppler: Topocentric 84336 2012 153 0.0 2012-Jun-01 19:25:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:25:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Jun-01 19:25:36 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Jun-01 19:25:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:25:36 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:25:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:25:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Jun-01 19:25:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:25:37 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2012-Jun-01 19:25:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:25:37 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.699021 2012.4211073085405 18.999933 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000011 21.083333333333350 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 1 11.406968542434065 21.041541774433334 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 2 11.405429736560512 21.136709244501400 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 3 11.398489396336968 21.179654198277746 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 4 11.393002614868076 21.124394570241630 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 5 11.394619454820173 21.028057501912237 2012-Jun-01 19:25:37 LOG4 log_alfabeam: ALFABEAM 6 11.401643362818547 20.988157733609153 2012-Jun-01 19:25:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300127 2012-Jun-01 19:25:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:25:37 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2012-Jun-01 19:25:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:25:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Jun-01 19:25:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Jun-01 19:25:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84338.00 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:25:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:25:48 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2012-Jun-01 19:25:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:25:48 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2012-Jun-01 19:25:48 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Jun-01 19:25:48 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:25:48 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Jun-01 19:25:48 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:25:48 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:25:48 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:25:48 LOG2 antvel: Parameters to Doppler: Topocentric 84348 2012 153 0.0 2012-Jun-01 19:25:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:25:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Jun-01 19:25:48 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Jun-01 19:25:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:25:48 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:25:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:25:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Jun-01 19:25:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:25:48 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Jun-01 19:25:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:25:49 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.702363 2012.4211076887975 18.999933 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000004 21.083333333333336 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 1 11.406984737138984 21.042073846213714 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 2 11.405408803145994 21.137128004680328 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 3 11.398451533744103 21.179533553031639 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 4 11.392986919860766 21.123865738556024 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 5 11.394640750063754 21.027657569782459 2012-Jun-01 19:25:49 LOG4 log_alfabeam: ALFABEAM 6 11.401679643839469 20.988279036364101 2012-Jun-01 19:25:49 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300128 2012-Jun-01 19:25:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:25:49 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Jun-01 19:25:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:25:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Jun-01 19:25:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:25:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Jun-01 19:25:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84350.00 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:25:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:26:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:26:00 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Jun-01 19:26:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:26:00 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Jun-01 19:26:00 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Jun-01 19:26:00 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:26:00 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Jun-01 19:26:00 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:26:00 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:26:00 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:26:00 LOG2 antvel: Parameters to Doppler: Topocentric 84360 2012 153 0.0 2012-Jun-01 19:26:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:26:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Jun-01 19:26:00 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Jun-01 19:26:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:26:00 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:26:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:26:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Jun-01 19:26:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:26:01 LOG5 begin_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2012-Jun-01 19:26:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:26:01 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.705706 2012.4211080690545 18.999933 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333332 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 1 11.407000481847676 21.042598985166428 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 2 11.405388028209799 21.137538807805022 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 3 11.398414296987998 21.179411893145616 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 4 11.392971664828023 21.123343857787660 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 5 11.394661867014740 21.027265349301828 2012-Jun-01 19:26:01 LOG4 log_alfabeam: ALFABEAM 6 11.401715323572978 20.988401118051527 2012-Jun-01 19:26:01 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300129 2012-Jun-01 19:26:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:26:01 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2012-Jun-01 19:26:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:26:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Jun-01 19:26:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Jun-01 19:26:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84362.00 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:26:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:26:12 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2012-Jun-01 19:26:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:26:12 LOG5 end_task: Level: (2) ID = <10151> Status = 0 0 0 0 ok 2012-Jun-01 19:26:12 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Jun-01 19:26:12 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:26:12 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Jun-01 19:26:12 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:26:12 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:26:12 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:26:12 LOG2 antvel: Parameters to Doppler: Topocentric 84372 2012 153 0.0 2012-Jun-01 19:26:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:26:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Jun-01 19:26:12 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Jun-01 19:26:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:26:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:26:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:26:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Jun-01 19:26:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:26:12 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2012-Jun-01 19:26:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:26:12 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.709048 2012.4211084493118 18.999933 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000007 21.083333333333336 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 1 11.407015781266795 21.043116977719297 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 2 11.405367425505322 21.137941602489935 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 3 11.398377695102861 21.179289388569316 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 4 11.392956844987744 21.122829137007894 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 5 11.394682792470006 21.026880882606928 2012-Jun-01 19:26:13 LOG4 log_alfabeam: ALFABEAM 6 11.401750393572227 20.988523819353716 2012-Jun-01 19:26:13 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300130 2012-Jun-01 19:26:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:26:13 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2012-Jun-01 19:26:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:26:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Jun-01 19:26:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Jun-01 19:26:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84374.00 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:26:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:26:24 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2012-Jun-01 19:26:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:26:24 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2012-Jun-01 19:26:24 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Jun-01 19:26:24 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:26:24 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Jun-01 19:26:24 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:26:24 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:26:24 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:26:24 LOG2 antvel: Parameters to Doppler: Topocentric 84384 2012 153 0.0 2012-Jun-01 19:26:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:26:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Jun-01 19:26:24 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Jun-01 19:26:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:26:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:26:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:26:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Jun-01 19:26:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:26:25 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2012-Jun-01 19:26:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:26:25 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.712390 2012.4211088295688 18.999933 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333343 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 1 11.407030653829533 21.043628082569438 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 2 11.405346989896813 21.138336702312170 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 3 11.398341703870440 21.179166095143554 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 4 11.392942442269133 21.122321316084701 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 5 11.394703532398470 21.026503863732465 2012-Jun-01 19:26:25 LOG4 log_alfabeam: ALFABEAM 6 11.401784877237217 20.988647095032309 2012-Jun-01 19:26:25 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300131 2012-Jun-01 19:26:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:26:25 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Jun-01 19:26:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:26:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Jun-01 19:26:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Jun-01 19:26:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84386.00 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:26:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:26:36 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Jun-01 19:26:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:26:36 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2012-Jun-01 19:26:36 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Jun-01 19:26:36 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:26:36 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Jun-01 19:26:36 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:26:36 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:26:36 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:26:36 LOG2 antvel: Parameters to Doppler: Topocentric 84395 2012 153 0.0 2012-Jun-01 19:26:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:26:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Jun-01 19:26:36 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Jun-01 19:26:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:26:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:26:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:26:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Jun-01 19:26:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:26:36 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2012-Jun-01 19:26:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:26:37 LOG5 log_alfabeam: Parameters: 11.4 21.083333333333332 11.715454 2012.4211091781376 18.999933 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 0 11.400000000000006 21.083333333333343 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 1 11.407043925453809 21.044090705477704 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 2 11.405328401792641 21.138692332815879 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 3 11.398309232213350 21.179052439220595 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 4 11.392929593032397 21.121861712671450 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 5 11.394722383913358 21.026164594896951 2012-Jun-01 19:26:37 LOG4 log_alfabeam: ALFABEAM 6 11.401815987799054 20.988760554795565 2012-Jun-01 19:26:37 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 215300132 2012-Jun-01 19:26:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:26:37 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2012-Jun-01 19:26:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:26:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Jun-01 19:26:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Jun-01 19:26:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84398.00 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:26:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:26:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:26:48 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2012-Jun-01 19:26:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:26:48 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2012-Jun-01 19:26:48 INFO2 smartfreq: Switching off CAL 2012-Jun-01 19:26:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:26:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:26:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:26:48 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2012-Jun-01 19:26:48 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:26:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:26:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:26:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:26:48 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2012-Jun-01 19:26:48 INFO3 restore_frequencies: Restoring original frequencies 2012-Jun-01 19:26:48 LOG5 antvel: Calling 'antvel 112400.000000 210500.000000 J Topocentric 0' 2012-Jun-01 19:26:48 LOG2 antvel: Precessing RA = 11:24:00.0 Dec = +21:05:00.0 Epoch = 2012.42111 J 2012-Jun-01 19:26:48 LOG2 antvel: Computed apparent RA = 11:24:40.2 Dec = +21:00:52.4 2012-Jun-01 19:26:49 LOG2 antvel: Parameters to Doppler: Topocentric 84408 2012 153 0.0 2012-Jun-01 19:26:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Jun-01 19:26:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Jun-01 19:26:49 INFO4 dopset_gen: New sky frequencies: 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 1375.000000 2012-Jun-01 19:26:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.000000 sky0=1375.000000 sky1=1375.000000 sky2=1375.000000 sky3=1375.000000 sky4=1375.000000 sky5=1375.000000 sky6=1375.000000 sky7=1375.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:26:49 LOG2 dopset_gen: Result from 'sky2syn': 1625.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:26:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Jun-01 19:26:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:49 STOP finish_task: Finishing task 'smart frequency switching' 2012-Jun-01 19:26:49 LOG5 finish_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2012-Jun-01 19:26:49 DONE finish_task: DONE finished pattern: smart frequency switching 2012-Jun-01 19:26:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:26:49 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2012-Jun-01 19:26:49 LOG5 end_task: Level: (1) ID = <10090> Status = 0 0 0 0 ok 2012-Jun-01 19:26:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625000000.0} 2012-Jun-01 19:26:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:28:47 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Jun-01 19:28:47 LOG4 exec_msg: From OBSERVER: run_command_file 120601.cmd 28 1 25 2012-Jun-01 19:28:47 LOG4 run_command_file: Calling 'run_command_file 120601.cmd 28 1 25' 2012-Jun-01 19:28:47 BEGIN begin_task: Starting task 'running command file '120601.cmd'' 2012-Jun-01 19:28:47 LOG5 begin_task: Level: (1) ID = <10160> Status = 0 0 0 0 ok 2012-Jun-01 19:28:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '120601.cmd' ...} 2012-Jun-01 19:28:47 NOTE run_command_file: Starting execution of command file '120601.cmd' from line 28 2012-Jun-01 19:28:47 COMMAND run_command_line: EXECUTING command 28: 'FIXEDDRIFT az=216.22 alfaangle=-13.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p3_011 ra=113400.00 dec=213500.00' 2012-Jun-01 19:28:47 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jun-01 19:28:47 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jun-01 19:28:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 216.22 -13.8 hcorcal 1 loopend-ON+OFF no off lcorcal first 1 AGES1367_p3_011 113400.00 213500.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jun-01 19:28:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jun-01 19:28:47 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2012-Jun-01 19:28:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2012-Jun-01 19:28:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jun-01 19:28:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p3_011} 2012-Jun-01 19:28:48 INFO3 fixed_driftmap: Sending telescope to Az = 216.22 and ZA = 3.94 2012-Jun-01 19:28:48 LOG3 track_source: Calling 'track_source AGES1367_p3_011 216.22 3.9383918698 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jun-01 19:28:48 START begin_task: Starting task 'sending tracking commands' 2012-Jun-01 19:28:48 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Jun-01 19:28:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_011} INFO {Slewing to source 'AGES1367_p3_011' ...} 2012-Jun-01 19:28:48 INFO1 track_source: Starting to track AGES1367_p3_011 2012-Jun-01 19:28:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_011" 2012-Jun-01 19:28:48 LOG3 vw_send: To DATATAKING: set ra 216.22 2012-Jun-01 19:28:48 LOG3 vw_send: To DATATAKING: set dec 3.9383918698 2012-Jun-01 19:28:48 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jun-01 19:28:48 LOG3 vw_send: To DATATAKING: pnt tr 216.22 3.9383918698 -CF 2012-Jun-01 19:28:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jun-01 19:28:48 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jun-01 19:28:48 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Jun-01 19:28:48 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jun-01 19:28:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:28:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jun-01 19:28:48 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Jun-01 19:28:48 START begin_task: Starting task 'rotate ALFA to -13.8 degrees' 2012-Jun-01 19:28:48 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2012-Jun-01 19:28:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -13.8 degrees ...} 2012-Jun-01 19:28:48 INFO2 rotate_alfa: ALFA commanded to -13.8 degrees 2012-Jun-01 19:28:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION -13.8 REPLY 2012-Jun-01 19:28:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jun-01 19:28:48 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jun-01 19:28:48 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Jun-01 19:28:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_011" 2012-Jun-01 19:28:48 LOG4 got_cormsg: From DATATAKING: set ra 216.22 2012-Jun-01 19:28:48 LOG4 got_cormsg: From DATATAKING: vw% 216.22 2012-Jun-01 19:28:48 LOG4 got_cormsg: From DATATAKING: 2012-Jun-01 19:28:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:28:48 LOG4 got_cormsg: From DATATAKING: set dec 3.9383918698 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: 3.9383918698 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: pnt tr 216.22 3.9383918698 -CF 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jun-01 19:28:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jun-01 19:29:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jun-01 19:29:08 INFO3 alfa_motor: ALFA rotator in-position -13.80 degrees 2012-Jun-01 19:29:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jun-01 19:29:08 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Jun-01 19:29:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jun-01 19:29:08 STOP finish_task: Finishing task 'rotate ALFA to -13.8 degrees' 2012-Jun-01 19:29:08 LOG5 finish_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2012-Jun-01 19:29:08 INFO2 finish_task: DONE finished configuration: rotating ALFA to -13.8 degrees 2012-Jun-01 19:29:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:29:08 STOP end_task: Finishing task 'rotate ALFA to -13.8 degrees' with status 'OK' 2012-Jun-01 19:29:08 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2012-Jun-01 19:29:08 START begin_task: Starting task 'waiting on telescope' 2012-Jun-01 19:29:08 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Jun-01 19:29:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jun-01 19:29:08 LOG3 waittrk: Start waittrk 5 2012-Jun-01 19:29:08 START begin_task: Starting task 'waiting on telescope movement' 2012-Jun-01 19:29:08 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Jun-01 19:29:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jun-01 19:29:13 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Jun-01 19:29:14 START begin_task: Starting task 'waiting on telescope on source' 2012-Jun-01 19:29:14 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jun-01 19:32:52 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jun-01 19:32:52 INFO2 waittrk: Now tracking AGES1367_p3_011 2012-Jun-01 19:32:52 LOG4 waittrk: Current telescope position: Az = 215.70 ZA = 3.95 2012-Jun-01 19:32:52 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jun-01 19:32:52 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jun-01 19:32:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:32:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jun-01 19:32:52 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 19:32:52 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 19:32:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 19:32:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:32:52 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 19:32:52 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 19:32:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:32:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:32:52 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:32:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 19:32:52 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Jun-01 19:32:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 19:32:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:32:53 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 19:32:53 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:32:53 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2012-Jun-01 19:32:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:32:53 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:32:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:32:53 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2012-Jun-01 19:32:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:32:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 19:32:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:32:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:32:53 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:32:53 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2012-Jun-01 19:32:53 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:32:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:32:53 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2012-Jun-01 19:32:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:32:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:32:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 19:32:53 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2012-Jun-01 19:32:53 LOG5 dopset_later: Calling 'dopset_later 0' 2012-Jun-01 19:32:53 INFO3 dopset_later: Setting Doppler correction now 2012-Jun-01 19:32:53 LOG5 antvel: Calling 'antvel 216.220000 3.938392 F Heliocentric 0' 2012-Jun-01 19:32:53 LOG2 antvel: Transforming current Az = 216.22 ZA = 3.94 to apparent RA = 11:59:13.7 Dec = +21:30:51.3 2012-Jun-01 19:32:53 LOG2 antvel: Parameters to Doppler: Heliocentric 84772 2012 153 0.0 2012-Jun-01 19:32:53 INFO5 antvel: Computed antenna velocity: +27.25542 km/s 2012-Jun-01 19:32:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=27.255423285500001 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Jun-01 19:32:53 INFO4 dopset_gen: New sky frequencies: 1336.968019 1336.968019 1336.968019 1336.968019 1336.968019 1336.968019 1336.968019 1336.968019 1336.968019 2012-Jun-01 19:32:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1336.968019 sky0=1336.968019 sky1=1336.968019 sky2=1336.968019 sky3=1336.968019 sky4=1336.968019 sky5=1336.968019 sky6=1336.968019 sky7=1336.968019 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:32:53 LOG2 dopset_gen: Result from 'sky2syn': 1586.968019 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:32:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1586968019.0} 2012-Jun-01 19:32:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:32:53 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:32:53 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2012-Jun-01 19:32:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Jun-01 19:32:54 INFO2 adjust_power: Starting to adjust WAPP power 2012-Jun-01 19:32:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jun-01 19:32:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jun-01 19:32:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:32:54 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jun-01 19:32:54 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1586968019.0} 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:32:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jun-01 19:32:54 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2012-Jun-01 19:32:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jun-01 19:32:54 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:32:54 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2012-Jun-01 19:32:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jun-01 19:32:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:32:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:32:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:32:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:32:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jun-01 19:32:54 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Jun-01 19:32:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jun-01 19:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:32:55 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 6 7 dB 2012-Jun-01 19:32:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 8 4 dB 2012-Jun-01 19:32:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 6 dB 2012-Jun-01 19:32:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 3 dB --- beam 7: 10 4 dB 2012-Jun-01 19:32:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jun-01 19:32:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jun-01 19:32:55 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Jun-01 19:32:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.096 1.005 ALFA beam 1: 0.920 1.108 2012-Jun-01 19:32:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.920 1.091 ALFA beam 3: 0.962 0.903 2012-Jun-01 19:32:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.987 0.863 ALFA beam 5: 1.045 1.099 2012-Jun-01 19:32:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.945 0.983 ALFA beam 7: 1.053 0.929 2012-Jun-01 19:32:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:32:55 LOG5 finish_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2012-Jun-01 19:32:55 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jun-01 19:32:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:32:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:32:55 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2012-Jun-01 19:32:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 19:32:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:32:55 LOG5 finish_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2012-Jun-01 19:32:55 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Jun-01 19:32:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:32:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:32:55 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2012-Jun-01 19:32:55 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.1 Start = 11:24:39.9 LST = 11:49:15.7 diff = -1475.8 secs 2012-Jun-01 19:32:55 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2012-Jun-01 19:32:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 19:32:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 19:32:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 19:32:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 19:32:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jun-01 19:32:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jun-01 19:32:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2012-Jun-01 19:32:56 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jun-01 19:32:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:32:56 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2012-Jun-01 19:32:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jun-01 19:32:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 19:32:56 INFO2 take_data: Starting WAPP+GALFA 1200-second scan: 215300133 2012-Jun-01 19:32:56 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:32:56 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Jun-01 19:32:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 19:32:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:32:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jun-01 19:32:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84777.00 2012-Jun-01 19:32:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20120601.a2048.0002.fits 2012-Jun-01 19:32:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120601.a2048.0002.fits} 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.968019 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:32:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:34:11 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 56079.982049 to 56079.982060! 2012-Jun-01 19:34:12 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (56079.982049 - 56079.982072)! 2012-Jun-01 19:47:36 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 19:47:36.297 (seconds: 71256.297)!} 2012-Jun-01 19:47:36 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 19:47:36.297 (seconds: 71256.297)! 2012-Jun-01 19:47:37 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 71255.0 to 71256.0! 2012-Jun-01 19:47:38 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (71255.0 - 71257.0)! 2012-Jun-01 19:52:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:52:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:52:57 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Jun-01 19:52:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:52:57 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2012-Jun-01 19:52:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 0' 2012-Jun-01 19:52:57 START begin_task: Starting task 'WAPP+GALFA calibration' 2012-Jun-01 19:52:57 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2012-Jun-01 19:52:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+GALFA Calibration} INFO {Making WAPP+GALFA calibration ...} 2012-Jun-01 19:52:57 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 19:52:57 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2012-Jun-01 19:52:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 19:52:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 19:52:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:52:57 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 19:52:57 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Jun-01 19:52:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 19:52:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:52:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:52:58 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:52:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 19:52:58 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Jun-01 19:52:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 19:52:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:52:58 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 19:52:58 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:52:58 LOG5 begin_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2012-Jun-01 19:52:58 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:52:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:52:59 LOG5 end_task: Level: (5) ID = <10181> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:52:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 19:52:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:52:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:52:59 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:52:59 LOG5 begin_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:52:59 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:52:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:52:59 LOG5 end_task: Level: (5) ID = <10182> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:52:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:52:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 19:52:59 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jun-01 19:52:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 19:52:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 19:52:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:52:59 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:52:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 19:52:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:52:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:52:59 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jun-01 19:52:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:52:59 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2012-Jun-01 19:52:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jun-01 19:52:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 19:52:59 INFO2 take_data: Starting WAPP+GALFA 1-second scan: 215300134 2012-Jun-01 19:53:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:53:00 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Jun-01 19:53:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:53:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jun-01 19:53:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85981.00 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.968019 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:53:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:53:02 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Jun-01 19:53:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:53:02 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2012-Jun-01 19:53:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 19:53:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 19:53:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 19:53:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 19:53:02 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2012-Jun-01 19:53:03 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 19:53:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 19:53:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 19:53:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 19:53:03 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2012-Jun-01 19:53:03 LOG4 take_data: Calling 'take_data 1 1 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jun-01 19:53:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:53:03 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2012-Jun-01 19:53:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jun-01 19:53:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 19:53:03 INFO2 take_data: Starting WAPP+GALFA 1-second scan: 215300135 2012-Jun-01 19:53:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:53:03 LOG5 begin_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2012-Jun-01 19:53:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:53:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jun-01 19:53:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85984.00 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.968019 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.968019 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:05 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jun-01 19:53:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 19:53:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 19:53:05 LOG5 end_task: Level: (5) ID = <10188> Status = 0 0 0 0 ok 2012-Jun-01 19:53:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 19:53:05 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2012-Jun-01 19:53:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 19:53:05 STOP finish_task: Finishing task 'WAPP+GALFA calibration' 2012-Jun-01 19:53:05 LOG5 finish_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2012-Jun-01 19:53:05 INFO2 finish_task: DONE finished calibration: WAPP+GALFA calibration 2012-Jun-01 19:53:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:53:05 STOP end_task: Finishing task 'WAPP+GALFA calibration' with status 'OK' 2012-Jun-01 19:53:05 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2012-Jun-01 19:53:05 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jun-01 19:53:05 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2012-Jun-01 19:53:05 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jun-01 19:53:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 19:53:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jun-01 19:53:06 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2012-Jun-01 19:53:06 COMMAND run_command_line: EXECUTING command 31: 'ENDIF' 2012-Jun-01 19:53:06 ERROR run_command_line: ERROR found an 'ENDIF' without matching 'IF'! 2012-Jun-01 19:53:06 LOG1 task_failed: Task 'running command file '120601.cmd'' failed! 2012-Jun-01 19:53:06 LOG5 task_failed: Level: (1) ID = <10160> Status = 0 0 0 0 ok 2012-Jun-01 19:53:06 ALERT run_command_file: Stopping command file processing at line 31! 2012-Jun-01 19:53:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2012-Jun-01 19:53:06 STOP finish_task: Finishing task 'running command file '120601.cmd'' 2012-Jun-01 19:53:06 LOG5 finish_task: Level: (1) ID = <10160> Status = 0 0 0 1 failed 2012-Jun-01 19:53:06 ERROR finish_task: ERROR failed running: command file '120601.cmd' 2012-Jun-01 19:53:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2012-Jun-01 19:53:06 END end_task: Finishing task 'running command file '120601.cmd'' with status 'FAILED' 2012-Jun-01 19:53:06 LOG5 end_task: Level: (1) ID = <10160> Status = 0 0 0 1 failed 2012-Jun-01 19:53:24 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2012-Jun-01 19:53:24 LOG4 exec_msg: From OBSERVER: fixed_driftmap fixed 1 1200 216.22 -13.8 hcorcal 1 loopend-ON+OFF no off lcorcal first 1 AGES1367_p3_011 113400.00 213500.00 J 8500.0 Heliocentric velocity(optical) 2012-Jun-01 19:53:24 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 216.22 -13.8 hcorcal 1 loopend-ON+OFF no off lcorcal first 1 AGES1367_p3_011 113400.00 213500.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jun-01 19:53:24 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jun-01 19:53:24 LOG5 begin_task: Level: (1) ID = <10189> Status = 0 0 0 0 ok 2012-Jun-01 19:53:24 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+GALFA' on 'AGES1367_p3_011' 2012-Jun-01 19:53:24 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jun-01 19:53:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p3_011} 2012-Jun-01 19:53:24 INFO3 fixed_driftmap: Sending telescope to Az = 216.22 and ZA = 3.94 2012-Jun-01 19:53:24 LOG3 track_source: Calling 'track_source AGES1367_p3_011 216.22 3.9383920858 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jun-01 19:53:24 START begin_task: Starting task 'sending tracking commands' 2012-Jun-01 19:53:24 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2012-Jun-01 19:53:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_011} INFO {Slewing to source 'AGES1367_p3_011' ...} 2012-Jun-01 19:53:24 INFO1 track_source: Starting to track AGES1367_p3_011 2012-Jun-01 19:53:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_011" 2012-Jun-01 19:53:24 LOG3 vw_send: To DATATAKING: set ra 216.22 2012-Jun-01 19:53:24 LOG3 vw_send: To DATATAKING: set dec 3.9383920858 2012-Jun-01 19:53:24 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jun-01 19:53:24 LOG3 vw_send: To DATATAKING: pnt tr 216.22 3.9383920858 -CF 2012-Jun-01 19:53:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jun-01 19:53:25 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jun-01 19:53:25 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2012-Jun-01 19:53:25 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jun-01 19:53:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:53:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jun-01 19:53:25 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2012-Jun-01 19:53:25 START begin_task: Starting task 'rotate ALFA to -13.8 degrees' 2012-Jun-01 19:53:25 LOG5 begin_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2012-Jun-01 19:53:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -13.8 degrees ...} 2012-Jun-01 19:53:25 INFO2 rotate_alfa: ALFA commanded to -13.8 degrees 2012-Jun-01 19:53:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION -13.8 REPLY 2012-Jun-01 19:53:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jun-01 19:53:25 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jun-01 19:53:25 LOG5 begin_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_011" 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: set ra 216.22 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: vw% 216.22 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: set dec 3.9383920858 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: 3.9383920858 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: pnt tr 216.22 3.9383920858 -CF 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jun-01 19:53:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jun-01 19:53:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jun-01 19:53:26 INFO3 alfa_motor: ALFA rotator in-position -13.80 degrees 2012-Jun-01 19:53:26 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jun-01 19:53:26 LOG5 end_task: Level: (3) ID = <10192> Status = 0 0 0 0 ok 2012-Jun-01 19:53:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jun-01 19:53:26 STOP finish_task: Finishing task 'rotate ALFA to -13.8 degrees' 2012-Jun-01 19:53:26 LOG5 finish_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2012-Jun-01 19:53:26 INFO2 finish_task: DONE finished configuration: rotating ALFA to -13.8 degrees 2012-Jun-01 19:53:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:53:26 STOP end_task: Finishing task 'rotate ALFA to -13.8 degrees' with status 'OK' 2012-Jun-01 19:53:26 LOG5 end_task: Level: (2) ID = <10191> Status = 0 0 0 0 ok 2012-Jun-01 19:53:26 START begin_task: Starting task 'waiting on telescope' 2012-Jun-01 19:53:26 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2012-Jun-01 19:53:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jun-01 19:53:26 LOG3 waittrk: Start waittrk 5 2012-Jun-01 19:53:26 START begin_task: Starting task 'waiting on telescope movement' 2012-Jun-01 19:53:26 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Jun-01 19:53:31 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jun-01 19:53:31 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Jun-01 19:53:31 START begin_task: Starting task 'waiting on telescope on source' 2012-Jun-01 19:53:31 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2012-Jun-01 19:53:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jun-01 19:53:32 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2012-Jun-01 19:53:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jun-01 19:53:32 INFO2 waittrk: Now tracking AGES1367_p3_011 2012-Jun-01 19:53:32 LOG4 waittrk: Current telescope position: Az = 215.70 ZA = 3.95 2012-Jun-01 19:53:32 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jun-01 19:53:32 LOG5 finish_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2012-Jun-01 19:53:32 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jun-01 19:53:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:53:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jun-01 19:53:33 LOG5 end_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 19:53:33 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 19:53:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 19:53:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:53:33 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 19:53:33 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 19:53:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:53:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:33 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:53:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 19:53:33 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 19:53:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:53:33 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 19:53:33 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:53:33 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:53:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:53:33 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:53:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 19:53:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 19:53:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:53:33 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 19:53:33 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:33 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 19:53:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 19:53:33 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Jun-01 19:53:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 19:53:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 19:53:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 19:53:34 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2012-Jun-01 19:53:34 LOG5 dopset_later: Calling 'dopset_later 0' 2012-Jun-01 19:53:34 INFO3 dopset_later: Setting Doppler correction now 2012-Jun-01 19:53:34 LOG5 antvel: Calling 'antvel 216.220000 3.938392 F Heliocentric 0' 2012-Jun-01 19:53:34 LOG2 antvel: Transforming current Az = 216.22 ZA = 3.94 to apparent RA = 12:19:57.1 Dec = +21:30:51.3 2012-Jun-01 19:53:34 LOG2 antvel: Parameters to Doppler: Heliocentric 86012 2012 153 0.0 2012-Jun-01 19:53:34 INFO5 antvel: Computed antenna velocity: +26.43603 km/s 2012-Jun-01 19:53:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=26.4360337723 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Jun-01 19:53:34 INFO4 dopset_gen: New sky frequencies: 1336.971673 1336.971673 1336.971673 1336.971673 1336.971673 1336.971673 1336.971673 1336.971673 1336.971673 2012-Jun-01 19:53:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1336.971673 sky0=1336.971673 sky1=1336.971673 sky2=1336.971673 sky3=1336.971673 sky4=1336.971673 sky5=1336.971673 sky6=1336.971673 sky7=1336.971673 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 19:53:34 LOG2 dopset_gen: Result from 'sky2syn': 1586.971673 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 19:53:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1586971673.0} 2012-Jun-01 19:53:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:53:34 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:53:34 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2012-Jun-01 19:53:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Jun-01 19:53:34 INFO2 adjust_power: Starting to adjust WAPP power 2012-Jun-01 19:53:34 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jun-01 19:53:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jun-01 19:53:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:53:34 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jun-01 19:53:34 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1586971673.0} 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:34 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 19:53:34 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jun-01 19:53:34 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2012-Jun-01 19:53:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jun-01 19:53:34 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 19:53:34 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2012-Jun-01 19:53:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jun-01 19:53:34 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:53:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:53:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:53:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 19:53:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jun-01 19:53:35 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2012-Jun-01 19:53:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jun-01 19:53:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 19:53:35 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 6 7 dB 2012-Jun-01 19:53:35 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 8 4 dB 2012-Jun-01 19:53:35 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 7 dB --- beam 5: 9 6 dB 2012-Jun-01 19:53:35 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 3 dB --- beam 7: 10 4 dB 2012-Jun-01 19:53:35 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jun-01 19:53:35 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jun-01 19:53:35 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2012-Jun-01 19:53:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.091 1.006 ALFA beam 1: 0.909 1.100 2012-Jun-01 19:53:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.916 1.083 ALFA beam 3: 0.981 0.914 2012-Jun-01 19:53:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.009 1.103 ALFA beam 5: 1.037 1.097 2012-Jun-01 19:53:35 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.930 0.992 ALFA beam 7: 1.038 0.925 2012-Jun-01 19:53:35 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:53:35 LOG5 finish_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2012-Jun-01 19:53:35 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jun-01 19:53:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:53:35 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:53:35 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2012-Jun-01 19:53:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 19:53:35 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 19:53:35 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2012-Jun-01 19:53:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Jun-01 19:53:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 19:53:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 19:53:36 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2012-Jun-01 19:53:36 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.1 Start = 11:24:39.9 LST = 12:10:00.1 diff = -2720.1 secs 2012-Jun-01 19:53:36 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2012-Jun-01 19:53:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 19:53:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 19:53:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 19:53:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 19:53:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jun-01 19:53:36 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jun-01 19:53:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2012-Jun-01 19:53:36 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jun-01 19:53:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 19:53:36 LOG5 begin_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2012-Jun-01 19:53:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jun-01 19:53:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 19:53:36 INFO2 take_data: Starting WAPP+GALFA 1200-second scan: 215300136 2012-Jun-01 19:53:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 19:53:37 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Jun-01 19:53:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20120601.a2048.0003.fits 2012-Jun-01 19:53:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 19:53:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120601.a2048.0003.fits} 2012-Jun-01 19:53:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 19:53:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jun-01 19:53:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86018.00 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.971673 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 19:53:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:00:01 ERROR WAPPDATA-search_pnt: ERROR data in pnt-table is too old! (56080.000000 > 56079.000000) 2012-Jun-01 20:00:01 ERROR WAPPDATA-compute_interp: ERROR can't interpolate positions at 00:00:00.000 --- using the last positions written to FITS-file! 2012-Jun-01 20:00:02 ERROR WAPPDATA-search_pnt: ERROR interpolation of pnt-data over a too large time gap attempted (56079.000000 - 56080.000012) --- cancelling interpolation attempt! 2012-Jun-01 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2012-Jun-01 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 56080.000012 x1 = 56080.000012 y1 = 12.274202249958 x2 = 56080.000012 y2 = 12.274202249958 2012-Jun-01 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2012-Jun-01 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 56080.000012 x1 = 56080.000012 y1 = 12.430362121046 x2 = 56080.000012 y2 = 12.430362121046 2012-Jun-01 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2012-Jun-01 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 56080.000012 x1 = 56080.000012 y1 = 21.583295962848 x2 = 56080.000012 y2 = 21.583295962848 2012-Jun-01 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2012-Jun-01 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 56080.000012 x1 = 56080.000012 y1 = -26144.511467589567 x2 = 56080.000012 y2 = -26144.511467589567 2012-Jun-01 20:00:02 ERROR WAPPDATA-interpolate: ERROR denominator is zero --- skipping interpolation! 2012-Jun-01 20:00:02 PROBLEM WAPPDATA-interpolate: Values: x = 56080.000012 x1 = 56080.000012 y1 = 17.883614034640 x2 = 56080.000012 y2 = 17.883614034640 2012-Jun-01 20:13:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 20:13:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 20:13:38 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Jun-01 20:13:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 20:13:38 LOG5 end_task: Level: (2) ID = <10204> Status = 0 0 0 0 ok 2012-Jun-01 20:13:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 0' 2012-Jun-01 20:13:38 START begin_task: Starting task 'WAPP+GALFA calibration' 2012-Jun-01 20:13:38 LOG5 begin_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2012-Jun-01 20:13:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+GALFA Calibration} INFO {Making WAPP+GALFA calibration ...} 2012-Jun-01 20:13:38 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 20:13:38 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Jun-01 20:13:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 20:13:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 20:13:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:13:38 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 20:13:38 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2012-Jun-01 20:13:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 20:13:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:13:39 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 20:13:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 20:13:39 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2012-Jun-01 20:13:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 20:13:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 20:13:39 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 20:13:39 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 20:13:39 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Jun-01 20:13:39 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 20:13:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 20:13:40 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 20:13:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 20:13:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 20:13:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 20:13:40 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 20:13:40 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:13:40 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 20:13:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 20:13:40 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 20:13:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 20:13:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 20:13:40 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jun-01 20:13:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 20:13:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 20:13:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 20:13:40 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 20:13:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 20:13:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 20:13:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 20:13:40 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jun-01 20:13:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 20:13:40 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2012-Jun-01 20:13:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jun-01 20:13:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 20:13:40 INFO2 take_data: Starting WAPP+GALFA 1-second scan: 215300137 2012-Jun-01 20:13:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 20:13:41 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2012-Jun-01 20:13:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 20:13:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jun-01 20:13:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 822.00 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.971673 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 20:13:43 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 20:13:43 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2012-Jun-01 20:13:43 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 20:13:43 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2012-Jun-01 20:13:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 20:13:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 20:13:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 20:13:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 20:13:43 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Jun-01 20:13:44 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 20:13:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 20:13:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 20:13:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 20:13:44 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Jun-01 20:13:44 LOG4 take_data: Calling 'take_data 1 1 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jun-01 20:13:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 20:13:44 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2012-Jun-01 20:13:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jun-01 20:13:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 20:13:44 INFO2 take_data: Starting WAPP+GALFA 1-second scan: 215300138 2012-Jun-01 20:13:44 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 20:13:44 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2012-Jun-01 20:13:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 20:13:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jun-01 20:13:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 825.00 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.971673 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.971673 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:13:46 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jun-01 20:13:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 20:13:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 20:13:46 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2012-Jun-01 20:13:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 20:13:46 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2012-Jun-01 20:13:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 20:13:46 STOP finish_task: Finishing task 'WAPP+GALFA calibration' 2012-Jun-01 20:13:46 LOG5 finish_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2012-Jun-01 20:13:46 INFO2 finish_task: DONE finished calibration: WAPP+GALFA calibration 2012-Jun-01 20:13:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:13:46 STOP end_task: Finishing task 'WAPP+GALFA calibration' with status 'OK' 2012-Jun-01 20:13:46 LOG5 end_task: Level: (2) ID = <10206> Status = 0 0 0 0 ok 2012-Jun-01 20:13:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jun-01 20:13:46 LOG5 finish_task: Level: (1) ID = <10189> Status = 0 0 0 0 ok 2012-Jun-01 20:13:46 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jun-01 20:13:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 20:13:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jun-01 20:13:47 LOG5 end_task: Level: (1) ID = <10189> Status = 0 0 0 0 ok 2012-Jun-01 20:25:48 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2012-Jun-01 20:25:49 LOG4 exec_msg: From OBSERVER: fixed_driftmap fixed 1 1200 216.22 -13.8 hcorcal 1 loopend-ON+OFF no off lcorcal first 1 AGES1367_p3_011 113400.00 213500.00 J 8500.0 Heliocentric velocity(optical) 2012-Jun-01 20:25:49 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 216.22 -13.8 hcorcal 1 loopend-ON+OFF no off lcorcal first 1 AGES1367_p3_011 113400.00 213500.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jun-01 20:25:49 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jun-01 20:25:49 LOG5 begin_task: Level: (1) ID = <10217> Status = 0 0 0 0 ok 2012-Jun-01 20:25:49 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+GALFA' on 'AGES1367_p3_011' 2012-Jun-01 20:25:49 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jun-01 20:25:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p3_011} 2012-Jun-01 20:25:49 INFO3 fixed_driftmap: Sending telescope to Az = 216.22 and ZA = 3.94 2012-Jun-01 20:25:49 LOG3 track_source: Calling 'track_source AGES1367_p3_011 216.22 3.9383923668 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jun-01 20:25:49 START begin_task: Starting task 'sending tracking commands' 2012-Jun-01 20:25:49 LOG5 begin_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2012-Jun-01 20:25:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p3_011} INFO {Slewing to source 'AGES1367_p3_011' ...} 2012-Jun-01 20:25:49 INFO1 track_source: Starting to track AGES1367_p3_011 2012-Jun-01 20:25:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p3_011" 2012-Jun-01 20:25:49 LOG3 vw_send: To DATATAKING: set ra 216.22 2012-Jun-01 20:25:49 LOG3 vw_send: To DATATAKING: set dec 3.9383923668 2012-Jun-01 20:25:49 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jun-01 20:25:49 LOG3 vw_send: To DATATAKING: pnt tr 216.22 3.9383923668 -CF 2012-Jun-01 20:25:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jun-01 20:25:49 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jun-01 20:25:49 LOG5 finish_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2012-Jun-01 20:25:49 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jun-01 20:25:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:25:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jun-01 20:25:49 LOG5 end_task: Level: (2) ID = <10218> Status = 0 0 0 0 ok 2012-Jun-01 20:25:49 START begin_task: Starting task 'rotate ALFA to -13.8 degrees' 2012-Jun-01 20:25:49 LOG5 begin_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2012-Jun-01 20:25:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -13.8 degrees ...} 2012-Jun-01 20:25:49 INFO2 rotate_alfa: ALFA commanded to -13.8 degrees 2012-Jun-01 20:25:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION -13.8 REPLY 2012-Jun-01 20:25:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jun-01 20:25:49 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jun-01 20:25:50 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p3_011" 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: set ra 216.22 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: vw% 216.22 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: set dec 3.9383923668 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: 3.9383923668 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: pnt tr 216.22 3.9383923668 -CF 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jun-01 20:25:50 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jun-01 20:25:50 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jun-01 20:25:50 INFO3 alfa_motor: ALFA rotator in-position -13.80 degrees 2012-Jun-01 20:25:50 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jun-01 20:25:50 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2012-Jun-01 20:25:50 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jun-01 20:25:50 STOP finish_task: Finishing task 'rotate ALFA to -13.8 degrees' 2012-Jun-01 20:25:50 LOG5 finish_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2012-Jun-01 20:25:50 INFO2 finish_task: DONE finished configuration: rotating ALFA to -13.8 degrees 2012-Jun-01 20:25:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:25:50 STOP end_task: Finishing task 'rotate ALFA to -13.8 degrees' with status 'OK' 2012-Jun-01 20:25:50 LOG5 end_task: Level: (2) ID = <10219> Status = 0 0 0 0 ok 2012-Jun-01 20:25:51 START begin_task: Starting task 'waiting on telescope' 2012-Jun-01 20:25:51 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2012-Jun-01 20:25:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jun-01 20:25:51 LOG3 waittrk: Start waittrk 5 2012-Jun-01 20:25:51 START begin_task: Starting task 'waiting on telescope movement' 2012-Jun-01 20:25:51 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jun-01 20:25:56 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 START begin_task: Starting task 'waiting on telescope on source' 2012-Jun-01 20:25:56 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jun-01 20:25:56 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jun-01 20:25:56 INFO2 waittrk: Now tracking AGES1367_p3_011 2012-Jun-01 20:25:56 LOG4 waittrk: Current telescope position: Az = 215.70 ZA = 3.95 2012-Jun-01 20:25:56 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jun-01 20:25:56 LOG5 finish_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jun-01 20:25:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:25:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jun-01 20:25:56 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 20:25:56 LOG5 begin_task: Level: (2) ID = <10224> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 20:25:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 20:25:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:25:56 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 20:25:56 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2012-Jun-01 20:25:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 20:25:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:25:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:57 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 20:25:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 20:25:57 LOG5 end_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2012-Jun-01 20:25:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 20:25:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 20:25:57 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 20:25:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 20:25:57 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2012-Jun-01 20:25:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 20:25:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 20:25:57 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2012-Jun-01 20:25:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 20:25:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 20:25:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 20:25:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 20:25:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 20:25:57 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2012-Jun-01 20:25:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 20:25:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 20:25:57 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2012-Jun-01 20:25:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 20:25:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 20:25:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 20:25:57 LOG5 end_task: Level: (2) ID = <10224> Status = 0 0 0 0 ok 2012-Jun-01 20:25:57 LOG5 dopset_later: Calling 'dopset_later 0' 2012-Jun-01 20:25:57 INFO3 dopset_later: Setting Doppler correction now 2012-Jun-01 20:25:57 LOG5 antvel: Calling 'antvel 216.220000 3.938392 F Heliocentric 0' 2012-Jun-01 20:25:57 LOG2 antvel: Transforming current Az = 216.22 ZA = 3.94 to apparent RA = 12:52:26.4 Dec = +21:30:51.3 2012-Jun-01 20:25:57 LOG2 antvel: Parameters to Doppler: Heliocentric 87956 2012 153 0.0 2012-Jun-01 20:25:57 INFO5 antvel: Computed antenna velocity: +24.74401 km/s 2012-Jun-01 20:25:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=24.744007820099998 restcent=1375.0 rest0=1375.0 rest1=1375.0 rest2=1375.0 rest3=1375.0 rest4=1375.0 rest5=1375.0 rest6=1375.0 rest7=1375.0 2012-Jun-01 20:25:57 INFO4 dopset_gen: New sky frequencies: 1336.979218 1336.979218 1336.979218 1336.979218 1336.979218 1336.979218 1336.979218 1336.979218 1336.979218 2012-Jun-01 20:25:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1336.979218 sky0=1336.979218 sky1=1336.979218 sky2=1336.979218 sky3=1336.979218 sky4=1336.979218 sky5=1336.979218 sky6=1336.979218 sky7=1336.979218 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jun-01 20:25:57 LOG2 dopset_gen: Result from 'sky2syn': 1586.979218 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jun-01 20:25:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1586979218.0} 2012-Jun-01 20:25:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 20:25:57 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 20:25:57 LOG5 begin_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2012-Jun-01 20:25:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Jun-01 20:25:58 INFO2 adjust_power: Starting to adjust WAPP power 2012-Jun-01 20:25:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jun-01 20:25:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jun-01 20:25:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:25:58 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jun-01 20:25:58 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1586979218.0} 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 20:25:58 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jun-01 20:25:58 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Jun-01 20:25:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jun-01 20:25:58 START begin_task: Starting task 'adjusting WAPP power' 2012-Jun-01 20:25:58 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Jun-01 20:25:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jun-01 20:25:58 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 20:25:58 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 20:25:58 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 20:25:58 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jun-01 20:25:58 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jun-01 20:25:58 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2012-Jun-01 20:25:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jun-01 20:25:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:25:59 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 9 5 dB --- beam 1: 6 8 dB 2012-Jun-01 20:25:59 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 10 5 dB --- beam 3: 8 4 dB 2012-Jun-01 20:25:59 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 8 8 dB --- beam 5: 9 6 dB 2012-Jun-01 20:25:59 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 10 3 dB --- beam 7: 10 4 dB 2012-Jun-01 20:25:59 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jun-01 20:25:59 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jun-01 20:25:59 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2012-Jun-01 20:25:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.101 1.020 ALFA beam 1: 0.921 0.856 2012-Jun-01 20:25:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.931 1.093 ALFA beam 3: 0.990 0.922 2012-Jun-01 20:25:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.025 0.869 ALFA beam 5: 1.053 1.106 2012-Jun-01 20:25:59 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.948 0.996 ALFA beam 7: 1.054 0.928 2012-Jun-01 20:25:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 20:25:59 LOG5 finish_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Jun-01 20:25:59 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jun-01 20:25:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:25:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 20:25:59 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Jun-01 20:25:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 20:25:59 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jun-01 20:25:59 LOG5 finish_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2012-Jun-01 20:25:59 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Jun-01 20:25:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:25:59 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jun-01 20:25:59 LOG5 end_task: Level: (2) ID = <10228> Status = 0 0 0 0 ok 2012-Jun-01 20:25:59 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.1 Start = 11:24:39.9 LST = 12:42:28.4 diff = -4668.5 secs 2012-Jun-01 20:25:59 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2012-Jun-01 20:25:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jun-01 20:25:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jun-01 20:25:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jun-01 20:25:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jun-01 20:25:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jun-01 20:25:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jun-01 20:26:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2012-Jun-01 20:26:00 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jun-01 20:26:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 20:26:00 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2012-Jun-01 20:26:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jun-01 20:26:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 20:26:00 INFO2 take_data: Starting WAPP+GALFA 1200-second scan: 215300139 2012-Jun-01 20:26:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 20:26:00 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2012-Jun-01 20:26:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jun-01 20:26:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 20:26:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jun-01 20:26:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1561.00 2012-Jun-01 20:26:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20120601.a2048.0004.fits 2012-Jun-01 20:26:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120601.a2048.0004.fits} 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.979218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:26:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:42:41 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 56080.029618 to 56080.029630! 2012-Jun-01 20:42:42 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (56080.029618 - 56080.029641)! 2012-Jun-01 20:46:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 20:46:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 20:46:01 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2012-Jun-01 20:46:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 20:46:01 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2012-Jun-01 20:46:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 0' 2012-Jun-01 20:46:01 START begin_task: Starting task 'WAPP+GALFA calibration' 2012-Jun-01 20:46:01 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2012-Jun-01 20:46:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+GALFA Calibration} INFO {Making WAPP+GALFA calibration ...} 2012-Jun-01 20:46:01 START begin_task: Starting task 'selecting calibration type' 2012-Jun-01 20:46:01 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Jun-01 20:46:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jun-01 20:46:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jun-01 20:46:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:46:01 START begin_task: Starting task 'waiting on setcal' 2012-Jun-01 20:46:01 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2012-Jun-01 20:46:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jun-01 20:46:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jun-01 20:46:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:46:02 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jun-01 20:46:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jun-01 20:46:02 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2012-Jun-01 20:46:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jun-01 20:46:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 20:46:02 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jun-01 20:46:02 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 20:46:02 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2012-Jun-01 20:46:02 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 20:46:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 20:46:03 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 20:46:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jun-01 20:46:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jun-01 20:46:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jun-01 20:46:03 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jun-01 20:46:03 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:46:03 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jun-01 20:46:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jun-01 20:46:03 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jun-01 20:46:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jun-01 20:46:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jun-01 20:46:03 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jun-01 20:46:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jun-01 20:46:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jun-01 20:46:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 20:46:03 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 20:46:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jun-01 20:46:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 20:46:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 20:46:03 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jun-01 20:46:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 20:46:03 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2012-Jun-01 20:46:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jun-01 20:46:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 20:46:03 INFO2 take_data: Starting WAPP+GALFA 1-second scan: 215300140 2012-Jun-01 20:46:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 20:46:04 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Jun-01 20:46:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 20:46:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jun-01 20:46:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2765.00 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.979218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 20:46:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 20:46:06 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Jun-01 20:46:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 20:46:06 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2012-Jun-01 20:46:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jun-01 20:46:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jun-01 20:46:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jun-01 20:46:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jun-01 20:46:06 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Jun-01 20:46:07 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jun-01 20:46:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jun-01 20:46:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jun-01 20:46:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jun-01 20:46:07 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Jun-01 20:46:07 LOG4 take_data: Calling 'take_data 1 1 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jun-01 20:46:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Jun-01 20:46:07 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2012-Jun-01 20:46:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jun-01 20:46:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jun-01 20:46:07 INFO2 take_data: Starting WAPP+GALFA 1-second scan: 215300141 2012-Jun-01 20:46:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Jun-01 20:46:07 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Jun-01 20:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jun-01 20:46:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2768.00 2012-Jun-01 20:46:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1586.979218 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1336.979218 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2012-Jun-01 20:46:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jun-01 20:46:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jun-01 20:46:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Jun-01 20:46:09 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Jun-01 20:46:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Jun-01 20:46:09 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2012-Jun-01 20:46:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jun-01 20:46:09 STOP finish_task: Finishing task 'WAPP+GALFA calibration' 2012-Jun-01 20:46:09 LOG5 finish_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2012-Jun-01 20:46:09 INFO2 finish_task: DONE finished calibration: WAPP+GALFA calibration 2012-Jun-01 20:46:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jun-01 20:46:09 STOP end_task: Finishing task 'WAPP+GALFA calibration' with status 'OK' 2012-Jun-01 20:46:09 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2012-Jun-01 20:46:09 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jun-01 20:46:09 LOG5 finish_task: Level: (1) ID = <10217> Status = 0 0 0 0 ok 2012-Jun-01 20:46:09 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jun-01 20:46:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jun-01 20:46:09 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jun-01 20:46:09 LOG5 end_task: Level: (1) ID = <10217> Status = 0 0 0 0 ok 2012-Jun-01 20:47:28 ALERT CIMA-exit_cima: Exiting CIMA ... 2012-Jun-01 20:47:28 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2012-Jun-01 20:47:28 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2048} 2012-Jun-01 20:47:28 LOG3 vw_send: To DATATAKING: mvdata a2048 2012-Jun-01 20:47:28 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2012-Jun-01 20:47:28 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2012-Jun-01 20:47:28 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2012-Jun-01 20:47:28 NOTE CIMA-exit_cima: Cleaning up session ... 2012-Jun-01 20:47:28 LOG4 got_cormsg: From DATATAKING: mvdata a2048 2012-Jun-01 20:47:28 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2012-Jun-01 20:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jun-01 20:47:30 LOG3 exec_msg: Closing socket 2012-Jun-01 20:47:30 INFO4 bgerror: sock_write: 'connect' error --- Connection refused 2012-Jun-01 20:47:30 INFO4 bgerror: while executing 2012-Jun-01 20:47:30 INFO4 bgerror: "sockmsg" 2012-Jun-01 20:47:30 INFO4 bgerror: (procedure "exec_msg" line 12) 2012-Jun-01 20:47:30 INFO4 bgerror: invoked from within 2012-Jun-01 20:47:30 INFO4 bgerror: "exec_msg" 2012-Jun-01 20:47:30 ERROR bgerror: ERROR script run by 'executive' aborted 2012-Jun-01 20:47:30 ERROR bgerror: ERROR reason: sock_write: 'connect' error --- Connection refused 2012-Jun-01 20:47:30 NOTE bgerror: The error occurred while the executive was executing the following task stack: 2012-Jun-01 20:47:30 NOTE query_task: The executive is IDLE 2012-Jun-01 20:47:30 WARNING abort_task: WARNING cleaning up after crash! 2012-Jun-01 20:47:30 INFO4 clean_up_after_crash: No cleaning required after crash