2012-Feb-06 00:45:44 BEGIN executive: CIMA executive starting ... 2012-Feb-06 00:45:44 NOTE executive: STARTING NEW CIMA SESSION 2012-Feb-06 00:45:44 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2012-Feb-06 00:45:44 INFO4 executive: This is an ON-LINE session 2012-Feb-06 00:45:44 INFO4 executive: This is a LOCAL session 2012-Feb-06 00:45:44 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Feb-06 00:45:44 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Israel cabrera' 2012-Feb-06 00:45:44 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20120206' 2012-Feb-06 00:45:45 LOG2 log_preferences: Currently applied preferences: 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(dailylog) = daily 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(offlinelog) = write 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(logcolours) = full 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(displaylevel) = INFO1 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(displayformat) = short 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(logformat) = new 2012-Feb-06 00:45:45 LOG2 log_preferences: prefs(fontsize) = 4 2012-Feb-06 00:45:45 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Feb-06 00:45:45 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Feb-06 00:45:45 ALERT executive: CIMA executive ready 2012-Feb-06 00:45:46 NOTE frontend: CIMA frontend ready 2012-Feb-06 00:45:47 LOG4 got_cormsg: From DATATAKING: vw% setup 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2012-Feb-06 00:45:52 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% io 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2012-Feb-06 00:45:52 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:45:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:45:53 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Feb-06 00:45:53 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2012-Feb-06 00:45:53 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Feb-06 00:45:53 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2012-Feb-06 00:45:53 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-06 00:45:53 NOTE select_receiver: Starting to select receiver ALFA 2012-Feb-06 00:45:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Feb-06 00:45:53 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Feb-06 00:45:53 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Feb-06 00:45:53 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Feb-06 00:45:54 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Feb-06 00:45:54 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-06 00:45:54 DONE finish_task: DONE finished selecting: receiver ALFA 2012-Feb-06 00:45:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:45:54 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Feb-06 00:45:54 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-06 00:45:54 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Feb-06 00:45:54 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Feb-06 00:46:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:34 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2012-Feb-06 00:46:34 INFO4 CIMA-load_command_file: Loaded command file '120206.cmd' 2012-Feb-06 00:46:36 INFO1 CIMA-run_command_file: Transferring command file '120206.cmd' to executive ... 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2012-Feb-06 00:46:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGESLEO_p1_053) < 094840 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=291.83 alfaangle=80.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_053 ra=103500.00 dec=133000.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGESLEO_p1_055) < 101240 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=311.12 alfaangle=62.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_055 ra=103500.00 dec=132700.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES1367_p2_017) < 103739 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=254.99 alfaangle=-59.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_017 ra=113400.00 dec=212600.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES1367_p2_019) < 110109 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=248.04 alfaangle=-48.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_019 ra=113400.00 dec=212300.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(AGES1367_p2_021) < 112438 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=218.58 alfaangle=-16.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_021 ra=113400.00 dec=212000.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 68 {IF LSTSLEW(AGES1367_p2_023) < 115039 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 69 {FIXEDDRIFT az=127.87 alfaangle=68.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_023 ra=113400.00 dec=211700.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 72 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 75 {IF LSTSLEW(AGES1367_p2_025) < 121409 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 76 {FIXEDDRIFT az=108.44 alfaangle=-88.4 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_025 ra=113400.00 dec=211400.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 79 {ENDIF} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 82 {IF LSTSLEW(AGES1367_p2_027) < 123739 THEN} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 83 {FIXEDDRIFT az=103.15 alfaangle=-80.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_027 ra=113400.00 dec=211100.00} 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 86 {ENDIF} 2012-Feb-06 00:46:37 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: run_command_file 120206.cmd 1 1 40 2012-Feb-06 00:46:37 LOG4 run_command_file: Calling 'run_command_file 120206.cmd 1 1 40' 2012-Feb-06 00:46:37 BEGIN begin_task: Starting task 'running command file '120206.cmd'' 2012-Feb-06 00:46:37 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Feb-06 00:46:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '120206.cmd' ...} 2012-Feb-06 00:46:37 NOTE run_command_file: Starting execution of command file '120206.cmd' from line 1 2012-Feb-06 00:46:37 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2012-Feb-06 00:46:37 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Feb-06 00:46:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 00:46:37 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Feb-06 00:46:38 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Feb-06 00:46:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Feb-06 00:46:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 00:46:39 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Feb-06 00:46:39 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-06 00:46:39 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Feb-06 00:46:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Feb-06 00:46:40 INFO1 config_iflo: Selecting receiver ALFA 2012-Feb-06 00:46:40 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2012-Feb-06 00:46:40 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2012-Feb-06 00:46:40 START begin_task: Starting task 'selecting receiver ALFA' 2012-Feb-06 00:46:40 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 NOTE select_receiver: Starting to select receiver ALFA 2012-Feb-06 00:46:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Feb-06 00:46:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Feb-06 00:46:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Feb-06 00:46:40 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 INFO2 finish_task: DONE finished selecting: receiver ALFA 2012-Feb-06 00:46:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 00:46:40 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Feb-06 00:46:40 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 START begin_task: Starting task 'waiting for receiver ALFA' 2012-Feb-06 00:46:40 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2012-Feb-06 00:46:40 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Feb-06 00:46:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Feb-06 00:46:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 00:46:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 00:46:40 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 00:46:40 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 00:46:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 00:46:40 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 00:46:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: alfafb 1 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Feb-06 00:46:40 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Feb-06 00:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Feb-06 00:46:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Feb-06 00:46:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:46:40 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Feb-06 00:46:40 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: alfafb 1 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Feb-06 00:46:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:46:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 00:46:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Feb-06 00:46:56 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Feb-06 00:46:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Feb-06 00:46:56 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 DONE finish_task: DONE finished configuration: IF/LO path 2012-Feb-06 00:46:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:46:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Feb-06 00:46:56 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Feb-06 00:46:56 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Feb-06 00:46:56 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Feb-06 00:46:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-06 00:46:56 START begin_task: Starting task 'selecting calibration port' 2012-Feb-06 00:46:56 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-06 00:46:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-06 00:46:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:46:56 START begin_task: Starting task 'waiting on calport' 2012-Feb-06 00:46:56 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 00:46:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-06 00:46:56 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-06 00:46:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-06 00:46:56 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 00:46:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 00:46:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:46:56 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:46:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:46:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:46:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:46:56 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Feb-06 00:46:56 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Feb-06 00:46:56 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-06 00:46:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-06 00:46:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:46:57 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Feb-06 00:46:57 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:46:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:46:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:46:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:46:57 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 00:46:57 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Feb-06 00:46:57 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-06 00:46:57 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Feb-06 00:46:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:46:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Feb-06 00:46:57 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-06 00:46:57 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2012-Feb-06 00:46:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2012-Feb-06 00:46:57 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2012-Feb-06 00:46:58 LOG3 is_if_valid: Current source data: up 641.2 15.5 UP - - 143 7.2 2012-Feb-06 00:46:58 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2012-Feb-06 00:46:58 INFO5 is_if_valid: Condition parsed as: 1 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2012-Feb-06 00:46:58 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2012-Feb-06 00:46:58 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2012-Feb-06 00:46:58 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-06 00:46:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2012-Feb-06 00:46:58 LOG3 track_source: Calling 'track_source galfasrc 102500.0 +144800 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2012-Feb-06 00:46:58 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 00:46:58 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-06 00:46:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2012-Feb-06 00:46:58 INFO1 track_source: Starting to track galfasrc 2012-Feb-06 00:46:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2012-Feb-06 00:46:58 LOG3 vw_send: To DATATAKING: set ra 102500.0 2012-Feb-06 00:46:58 LOG3 vw_send: To DATATAKING: set dec +144800 2012-Feb-06 00:46:58 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 00:46:58 LOG3 vw_send: To DATATAKING: pnt tr 102500.0 +144800 -CJ 2012-Feb-06 00:46:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2012-Feb-06 00:46:58 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 00:46:58 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-06 00:46:58 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 00:46:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 00:46:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 00:46:58 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-06 00:46:58 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2012-Feb-06 00:46:58 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-06 00:46:58 DONE finish_task: DONE finished tracking: source 'galfasrc' 2012-Feb-06 00:46:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:46:58 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2012-Feb-06 00:46:58 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2012-Feb-06 00:46:58 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2012-Feb-06 00:46:58 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2012-Feb-06 00:46:58 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2012-Feb-06 00:46:58 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2012-Feb-06 00:46:58 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2012-Feb-06 00:46:58 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2012-Feb-06 00:46:58 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2012-Feb-06 00:46:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2012-Feb-06 00:46:58 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-06 00:46:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2012-Feb-06 00:46:59 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2012-Feb-06 00:46:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2012-Feb-06 00:46:59 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 00:46:59 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 00:46:59 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Feb-06 00:46:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0000.fits 2012-Feb-06 00:46:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2012-Feb-06 00:46:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Feb-06 00:46:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Feb-06 00:46:59 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20120206.a2048.0000.fits} 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: set ra 102500.0 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: vw% 102500.0 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: set dec +144800 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: pnt tr 102500.0 +144800 -CJ 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: +144800 2012-Feb-06 00:46:59 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Feb-06 00:46:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 00:47:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 00:47:40 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2012-Feb-06 00:47:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 00:47:40 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Feb-06 00:47:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 00:47:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2012-Feb-06 00:47:40 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-06 00:47:40 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2012-Feb-06 00:47:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:47:40 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2012-Feb-06 00:47:40 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-06 00:47:40 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2012-Feb-06 00:47:40 BEGIN begin_task: Starting task 'waiting on telescope' 2012-Feb-06 00:47:40 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-06 00:47:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 00:47:40 LOG3 waittrk: Start waittrk 5 2012-Feb-06 00:47:40 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 00:47:40 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Feb-06 00:47:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 00:47:45 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Feb-06 00:47:45 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 00:47:45 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Feb-06 00:54:12 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 00:54:12 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Feb-06 00:54:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 00:54:12 INFO2 waittrk: Now tracking galfasrc 2012-Feb-06 00:54:12 LOG4 waittrk: Current telescope position: Az = 642.74 ZA = 13.78 2012-Feb-06 00:54:12 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 00:54:12 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-06 00:54:12 DONE finish_task: DONE finished waiting: telescope on source 2012-Feb-06 00:54:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:54:12 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 00:54:12 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-06 00:54:12 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Feb-06 00:54:12 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2012-Feb-06 00:54:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 00:54:13 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Feb-06 00:54:13 BEGIN begin_task: Starting task 'smart frequency switching' 2012-Feb-06 00:54:13 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2012-Feb-06 00:54:13 INFO1 smartfreq: Starting pattern: Smart frequency switching 2012-Feb-06 00:54:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2012-Feb-06 00:54:13 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 00:54:13 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 00:54:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 00:54:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:54:13 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 00:54:13 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 00:54:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:54:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:13 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 00:54:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 00:54:13 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 00:54:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 00:54:13 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 00:54:13 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 00:54:13 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:13 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 00:54:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 00:54:13 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 00:54:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 00:54:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 00:54:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 00:54:13 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 00:54:13 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 00:54:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 00:54:13 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 00:54:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 00:54:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 00:54:13 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-06 00:54:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 00:54:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 00:54:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 00:54:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 00:54:13 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20120206.a2048.0000.fits' is empty! 2012-Feb-06 00:54:13 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2012-Feb-06 00:54:13 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 00:54:13 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 00:54:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 00:54:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 00:54:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:54:14 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-06 00:54:14 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:54:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:54:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:54:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:54:14 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-06 00:54:14 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Feb-06 00:54:14 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 00:54:14 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-06 00:54:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Feb-06 00:54:14 INFO2 adjust_power: Starting to adjust WAPP power 2012-Feb-06 00:54:14 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 00:54:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 00:54:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:54:14 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 00:54:14 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Feb-06 00:54:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 00:54:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:54:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 00:54:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:17 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 00:54:17 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 00:54:17 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 00:54:17 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 00:54:17 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 00:54:17 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 00:54:17 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 00:54:17 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 00:54:17 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 00:54:17 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 00:54:17 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 00:54:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:17 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-06 00:54:17 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 2 3 dB 2012-Feb-06 00:54:17 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Feb-06 00:54:17 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-06 00:54:17 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 00:54:17 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 00:54:17 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.043 1.051 ALFA beam 1: 1.114 0.968 2012-Feb-06 00:54:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.082 0.907 ALFA beam 3: 0.936 1.049 2012-Feb-06 00:54:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.764 0.903 ALFA beam 5: 1.064 1.021 2012-Feb-06 00:54:17 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.010 0.014 ALFA beam 7: 1.093 0.014 2012-Feb-06 00:54:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 00:54:17 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 00:54:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 00:54:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 00:54:17 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 00:54:17 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 00:54:17 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Feb-06 00:54:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 00:54:17 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 00:54:17 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-06 00:54:17 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Feb-06 00:54:17 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-06 00:54:17 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-06 00:54:17 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:54:17 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10140 J 2012-Feb-06 00:54:17 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:54:18 LOG2 antvel: Parameters to Doppler: Topocentric 17657 2012 37 0.0 2012-Feb-06 00:54:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:54:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-06 00:54:18 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-06 00:54:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:54:18 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:54:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:54:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Feb-06 00:54:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:54:18 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Feb-06 00:54:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-06 00:54:18 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.504080 2012.1014036872259 18.999933 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.800000000000002 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 1 10.409413819395169 14.814245330619691 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 2 10.412612609802947 14.727895343827464 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 3 10.419859231648408 14.713193466382805 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 4 10.423922422275719 14.785958885697625 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 5 10.420697011120010 14.872654528928342 2012-Feb-06 00:54:18 LOG4 log_alfabeam: ALFABEAM 6 10.413435211822822 14.886238480264444 2012-Feb-06 00:54:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700022 2012-Feb-06 00:54:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:54:18 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Feb-06 00:54:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:54:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:54:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-06 00:54:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17659.00 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:54:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:54:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 00:54:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.086 1.095 0.994 2012-Feb-06 00:54:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.907 0.936 1.049 2012-Feb-06 00:54:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 0.916 1.115 1.049 2012-Feb-06 00:54:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.014 1.093 0.014 2012-Feb-06 00:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2012-Feb-06 00:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2012-Feb-06 00:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-06 00:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-06 00:54:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:54:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:54:29 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Feb-06 00:54:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:54:29 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Feb-06 00:54:29 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Feb-06 00:54:29 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-06 00:54:29 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-06 00:54:29 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:54:29 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10140 J 2012-Feb-06 00:54:29 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:54:29 LOG2 antvel: Parameters to Doppler: Topocentric 17669 2012 37 0.0 2012-Feb-06 00:54:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:54:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-06 00:54:29 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-06 00:54:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:54:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:54:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:54:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Feb-06 00:54:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:54:29 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Feb-06 00:54:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-06 00:54:29 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.507423 2012.1014040674829 18.999933 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 1 10.409414612494169 14.814329866893081 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 2 10.412608591032923 14.727943367719750 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 3 10.419854382588550 14.713155502477596 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 4 10.423921651313607 14.785875212222257 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 5 10.420700969325534 14.872608768245227 2012-Feb-06 00:54:29 LOG4 log_alfabeam: ALFABEAM 6 10.413439905111435 14.886274936281902 2012-Feb-06 00:54:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700023 2012-Feb-06 00:54:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:54:30 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-06 00:54:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:54:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:54:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-06 00:54:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17671.00 2012-Feb-06 00:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:54:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.159 (still bad) 2012-Feb-06 00:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.158 (still bad) 2012-Feb-06 00:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.160 (still bad) 2012-Feb-06 00:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.157 (still bad) 2012-Feb-06 00:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.159 (still bad) 2012-Feb-06 00:54:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:54:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:54:41 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-06 00:54:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:54:41 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Feb-06 00:54:41 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Feb-06 00:54:41 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-06 00:54:41 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-06 00:54:41 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:54:41 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10140 J 2012-Feb-06 00:54:41 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:54:41 LOG2 antvel: Parameters to Doppler: Topocentric 17681 2012 37 0.0 2012-Feb-06 00:54:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:54:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-06 00:54:41 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-06 00:54:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:54:41 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:54:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:54:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Feb-06 00:54:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:54:41 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-06 00:54:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-06 00:54:41 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.510765 2012.1014044477399 18.999933 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999995 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 1 10.409415416293308 14.814415029570066 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 2 10.412604544805186 14.727991799400591 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 3 10.419849494945169 14.713117311782344 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 4 10.423920869898447 14.785790917138387 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 5 10.420704954896943 14.872562615764391 2012-Feb-06 00:54:41 LOG4 log_alfabeam: ALFABEAM 6 10.413444635805282 14.886311613860052 2012-Feb-06 00:54:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700024 2012-Feb-06 00:54:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:54:42 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Feb-06 00:54:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:54:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:54:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-06 00:54:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17683.00 2012-Feb-06 00:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.158 (still bad) 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:54:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.156 (still bad) 2012-Feb-06 00:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.154 (still bad) 2012-Feb-06 00:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.155 (still bad) 2012-Feb-06 00:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.152 (still bad) 2012-Feb-06 00:54:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:54:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:54:53 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Feb-06 00:54:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:54:53 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-06 00:54:53 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Feb-06 00:54:53 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-06 00:54:53 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-06 00:54:53 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:54:53 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10140 J 2012-Feb-06 00:54:53 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:54:53 LOG2 antvel: Parameters to Doppler: Topocentric 17693 2012 37 0.0 2012-Feb-06 00:54:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:54:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-06 00:54:53 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-06 00:54:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:54:53 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:54:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:54:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Feb-06 00:54:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:54:53 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2012-Feb-06 00:54:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-06 00:54:53 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.514108 2012.1014048279972 18.999933 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 1 10.409416231446340 14.814500875900173 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 2 10.412600468453729 14.728040672657972 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 3 10.419844565369903 14.713078869891801 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 4 10.423920077393497 14.785705943756119 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 5 10.420708970466025 14.872516039236594 2012-Feb-06 00:54:53 LOG4 log_alfabeam: ALFABEAM 6 10.413449407145260 14.886348536491194 2012-Feb-06 00:54:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700025 2012-Feb-06 00:54:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:54:54 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-06 00:54:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:54:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.152 (still bad) 2012-Feb-06 00:54:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:54:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-06 00:54:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17695.00 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:54:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.153 (still bad) 2012-Feb-06 00:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2012-Feb-06 00:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Feb-06 00:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2012-Feb-06 00:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2012-Feb-06 00:55:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:55:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:55:05 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-06 00:55:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:55:05 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2012-Feb-06 00:55:05 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Feb-06 00:55:05 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-06 00:55:05 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-06 00:55:05 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:55:05 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:55:05 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:55:05 LOG2 antvel: Parameters to Doppler: Topocentric 17705 2012 37 0.0 2012-Feb-06 00:55:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:55:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-06 00:55:05 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-06 00:55:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:55:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:55:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:55:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Feb-06 00:55:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:55:05 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2012-Feb-06 00:55:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-06 00:55:05 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.517450 2012.1014052082542 18.999933 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999997 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 1 10.409417057641365 14.814587360884030 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 2 10.412596364170239 14.728089963125347 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 3 10.419839596382920 14.713040198246663 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 4 10.423919274100731 14.785620336593245 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 5 10.420713013879560 14.872469061831199 2012-Feb-06 00:55:05 LOG4 log_alfabeam: ALFABEAM 6 10.413454216692068 14.886385683636677 2012-Feb-06 00:55:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700026 2012-Feb-06 00:55:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:55:06 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-06 00:55:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:55:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:55:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-06 00:55:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-06 00:55:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17707.00 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-06 00:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-06 00:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-06 00:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-06 00:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-06 00:55:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:55:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:55:17 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-06 00:55:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:55:17 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2012-Feb-06 00:55:17 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Feb-06 00:55:17 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-06 00:55:17 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-06 00:55:17 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:55:17 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:55:17 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:55:17 LOG2 antvel: Parameters to Doppler: Topocentric 17717 2012 37 0.0 2012-Feb-06 00:55:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:55:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-06 00:55:17 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-06 00:55:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:55:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:55:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:55:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Feb-06 00:55:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:55:17 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2012-Feb-06 00:55:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-06 00:55:17 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.520792 2012.1014055885112 18.999933 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 1 10.409417895299505 14.814674516539043 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 2 10.412592230490164 14.728139690301095 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 3 10.419834586080921 14.713001283818429 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 4 10.423918459609515 14.785534063933849 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 5 10.420717086586178 14.872421664913587 2012-Feb-06 00:55:17 LOG4 log_alfabeam: ALFABEAM 6 10.413459066287933 14.886423067865337 2012-Feb-06 00:55:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700027 2012-Feb-06 00:55:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:55:18 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-06 00:55:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:55:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:55:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-06 00:55:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17719.00 2012-Feb-06 00:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:55:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:55:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 00:55:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.059 1.114 0.973 2012-Feb-06 00:55:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.912 0.947 1.064 2012-Feb-06 00:55:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 0.913 1.084 1.030 2012-Feb-06 00:55:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.025 1.104 0.025 2012-Feb-06 00:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 00:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-06 00:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-06 00:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 00:55:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:55:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:55:29 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-06 00:55:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:55:29 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2012-Feb-06 00:55:29 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Feb-06 00:55:29 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-06 00:55:29 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-06 00:55:29 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:55:29 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:55:29 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:55:29 LOG2 antvel: Parameters to Doppler: Topocentric 17729 2012 37 0.0 2012-Feb-06 00:55:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:55:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-06 00:55:29 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-06 00:55:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:55:29 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:55:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:55:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Feb-06 00:55:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:55:29 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Feb-06 00:55:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-06 00:55:29 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.524135 2012.1014059687682 18.999933 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666663 14.800000000000004 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 1 10.409418744858861 14.814762375765257 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 2 10.412588065911125 14.728189874278923 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 3 10.419829532505180 14.712962113280101 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 4 10.423917633492579 14.785447093185827 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 5 10.420721190072245 14.872373829276610 2012-Feb-06 00:55:29 LOG4 log_alfabeam: ALFABEAM 6 10.413463957828794 14.886460702038278 2012-Feb-06 00:55:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700028 2012-Feb-06 00:55:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:55:30 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-06 00:55:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:55:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:55:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-06 00:55:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17731.00 2012-Feb-06 00:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:55:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 00:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 00:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-06 00:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 00:55:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:55:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:55:41 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-06 00:55:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:55:41 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Feb-06 00:55:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Feb-06 00:55:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 00:55:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 00:55:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:55:41 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2012-Feb-06 00:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 00:55:41 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:55:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 00:55:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:55:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:55:41 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2012-Feb-06 00:55:41 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Feb-06 00:55:41 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-06 00:55:41 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-06 00:55:41 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:55:41 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:55:41 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:55:41 LOG2 antvel: Parameters to Doppler: Topocentric 17741 2012 37 0.0 2012-Feb-06 00:55:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:55:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-06 00:55:41 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-06 00:55:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:55:41 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:55:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:55:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Feb-06 00:55:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:55:41 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Feb-06 00:55:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Feb-06 00:55:41 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.527477 2012.1014063490252 18.999933 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999995 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 1 10.409419605996755 14.814850892598843 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 2 10.412583872669805 14.728240490126293 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 3 10.419824438232135 14.712922708484836 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 4 10.423916796062430 14.785359469823241 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 5 10.420725322139987 14.872325578631852 2012-Feb-06 00:55:41 LOG4 log_alfabeam: ALFABEAM 6 10.413468888820791 14.886498565216790 2012-Feb-06 00:55:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700029 2012-Feb-06 00:55:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:55:42 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2012-Feb-06 00:55:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:55:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:55:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17743.00 2012-Feb-06 00:55:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:55:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.542 (still bad) 2012-Feb-06 00:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.544 (still bad) 2012-Feb-06 00:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.546 (still bad) 2012-Feb-06 00:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.552 (still bad) 2012-Feb-06 00:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.549 (still bad) 2012-Feb-06 00:55:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:55:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:55:53 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2012-Feb-06 00:55:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:55:53 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Feb-06 00:55:53 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Feb-06 00:55:53 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-06 00:55:53 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-06 00:55:53 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:55:53 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:55:53 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:55:53 LOG2 antvel: Parameters to Doppler: Topocentric 17753 2012 37 0.0 2012-Feb-06 00:55:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:55:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-06 00:55:53 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-06 00:55:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:55:53 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:55:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:55:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Feb-06 00:55:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:55:53 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2012-Feb-06 00:55:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Feb-06 00:55:53 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.530820 2012.1014067292824 18.999933 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.799999999999997 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 1 10.409420479417584 14.814940126696339 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 2 10.412579647999182 14.728291573302050 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 3 10.419819299759874 14.712883044261631 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 4 10.423915946632770 14.785271134766406 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 5 10.420729485522282 14.872276879122339 2012-Feb-06 00:55:53 LOG4 log_alfabeam: ALFABEAM 6 10.413473862653612 14.886536681645387 2012-Feb-06 00:55:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700030 2012-Feb-06 00:55:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:55:54 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Feb-06 00:55:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:55:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:55:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:55:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-06 00:55:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17755.00 2012-Feb-06 00:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.547 (still bad) 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:55:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.612 (still bad) 2012-Feb-06 00:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.611 (still bad) 2012-Feb-06 00:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.612 (still bad) 2012-Feb-06 00:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.611 (still bad) 2012-Feb-06 00:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.612 (still bad) 2012-Feb-06 00:56:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:56:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:56:05 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Feb-06 00:56:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:56:05 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2012-Feb-06 00:56:05 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Feb-06 00:56:05 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-06 00:56:05 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-06 00:56:05 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:56:05 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:56:05 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:56:05 LOG2 antvel: Parameters to Doppler: Topocentric 17765 2012 37 0.0 2012-Feb-06 00:56:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:56:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-06 00:56:05 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-06 00:56:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:56:05 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:56:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:56:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Feb-06 00:56:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:56:05 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Feb-06 00:56:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Feb-06 00:56:05 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.534162 2012.1014071095394 18.999933 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 1 10.409421364791276 14.815030031437114 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 2 10.412575394166518 14.728343098487580 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 3 10.419814119703167 14.712843142743870 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 4 10.423915085523291 14.785182134140546 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 5 10.420733677991041 14.872227754829410 2012-Feb-06 00:56:05 LOG4 log_alfabeam: ALFABEAM 6 10.413478876796219 14.886575030113482 2012-Feb-06 00:56:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700031 2012-Feb-06 00:56:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:56:06 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Feb-06 00:56:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:56:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:56:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-06 00:56:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17767.00 2012-Feb-06 00:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.610 (still bad) 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:56:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.607 (still bad) 2012-Feb-06 00:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.606 (still bad) 2012-Feb-06 00:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.610 (still bad) 2012-Feb-06 00:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.610 (still bad) 2012-Feb-06 00:56:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:56:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:56:17 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Feb-06 00:56:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:56:17 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Feb-06 00:56:17 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Feb-06 00:56:17 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-06 00:56:17 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-06 00:56:17 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:56:17 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:56:17 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:56:17 LOG2 antvel: Parameters to Doppler: Topocentric 17777 2012 37 0.0 2012-Feb-06 00:56:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:56:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-06 00:56:17 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-06 00:56:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:56:17 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:56:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:56:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Feb-06 00:56:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:56:17 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2012-Feb-06 00:56:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Feb-06 00:56:17 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.537505 2012.1014074897964 18.999933 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666663 14.799999999999997 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 1 10.409422262843753 14.815120667476537 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 2 10.412571108363119 14.728395101840601 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 3 10.419808894496104 14.712802978448416 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 4 10.423914212026647 14.785092407874192 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 5 10.420737902320866 14.872178171223478 2012-Feb-06 00:56:17 LOG4 log_alfabeam: ALFABEAM 6 10.413483934700295 14.886613635172415 2012-Feb-06 00:56:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700032 2012-Feb-06 00:56:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:56:18 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2012-Feb-06 00:56:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:56:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.607 (still bad) 2012-Feb-06 00:56:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-06 00:56:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17779.00 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:56:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.599 (still bad) 2012-Feb-06 00:56:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 00:56:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.497 1.481 1.518 1.316 2012-Feb-06 00:56:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.521 1.267 1.365 1.484 2012-Feb-06 00:56:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.986 1.303 1.572 1.426 2012-Feb-06 00:56:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.468 0.025 1.591 0.026 2012-Feb-06 00:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.592 (still bad) 2012-Feb-06 00:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.594 (still bad) 2012-Feb-06 00:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.593 (still bad) 2012-Feb-06 00:56:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:56:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:56:29 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2012-Feb-06 00:56:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:56:29 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2012-Feb-06 00:56:29 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Feb-06 00:56:29 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-06 00:56:29 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-06 00:56:29 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:56:29 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:56:29 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:56:29 LOG2 antvel: Parameters to Doppler: Topocentric 17789 2012 37 0.0 2012-Feb-06 00:56:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:56:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-06 00:56:29 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-06 00:56:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:56:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:56:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:56:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Feb-06 00:56:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:56:29 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2012-Feb-06 00:56:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Feb-06 00:56:29 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.540847 2012.1014078700534 18.999933 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666663 14.800000000000004 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 1 10.409423173237380 14.815211987525924 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 2 10.412566792887365 14.728447557649353 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 3 10.419803626792492 14.712762573793292 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 4 10.423913326469906 14.785002002754982 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 5 10.420742156252858 14.872128152762485 2012-Feb-06 00:56:29 LOG4 log_alfabeam: ALFABEAM 6 10.413489033796974 14.886652475335527 2012-Feb-06 00:56:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700033 2012-Feb-06 00:56:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:56:30 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Feb-06 00:56:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:56:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:56:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.591 (still bad) 2012-Feb-06 00:56:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-06 00:56:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17791.00 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:56:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.573 (still bad) 2012-Feb-06 00:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.560 (still bad) 2012-Feb-06 00:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.561 (still bad) 2012-Feb-06 00:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.561 (still bad) 2012-Feb-06 00:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.560 (still bad) 2012-Feb-06 00:56:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:56:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:56:41 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Feb-06 00:56:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:56:41 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2012-Feb-06 00:56:41 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Feb-06 00:56:41 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-06 00:56:41 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-06 00:56:41 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:56:41 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:56:41 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:56:41 LOG2 antvel: Parameters to Doppler: Topocentric 17801 2012 37 0.0 2012-Feb-06 00:56:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:56:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-06 00:56:41 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-06 00:56:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:56:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:56:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:56:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Feb-06 00:56:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:56:41 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2012-Feb-06 00:56:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Feb-06 00:56:41 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.544190 2012.1014082503104 18.999933 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666661 14.800000000000004 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 1 10.409424096720377 14.815304053260865 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 2 10.412562444888131 14.728500502788698 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 3 10.419798312960886 14.712721902979927 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 4 10.423912428123897 14.784910857698339 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 5 10.420746442604120 14.872077664226554 2012-Feb-06 00:56:41 LOG4 log_alfabeam: ALFABEAM 6 10.413494177601434 14.886691575464397 2012-Feb-06 00:56:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700034 2012-Feb-06 00:56:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:56:42 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2012-Feb-06 00:56:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:56:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:56:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-06 00:56:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17803.00 2012-Feb-06 00:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.560 (still bad) 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:56:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.553 (still bad) 2012-Feb-06 00:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.555 (still bad) 2012-Feb-06 00:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.563 (still bad) 2012-Feb-06 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.554 (still bad) 2012-Feb-06 00:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.554 (still bad) 2012-Feb-06 00:56:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:56:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:56:53 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2012-Feb-06 00:56:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:56:53 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2012-Feb-06 00:56:53 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Feb-06 00:56:53 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-06 00:56:53 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-06 00:56:53 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:56:53 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:56:53 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:56:53 LOG2 antvel: Parameters to Doppler: Topocentric 17813 2012 37 0.0 2012-Feb-06 00:56:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:56:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-06 00:56:53 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-06 00:56:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:56:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:56:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:56:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Feb-06 00:56:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:56:53 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Feb-06 00:56:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Feb-06 00:56:53 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.547532 2012.1014086305677 18.999933 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999994 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 1 10.409425032947343 14.815396816713035 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 2 10.412558066695404 14.728553911146511 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 3 10.419792955694804 14.712680988715389 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 4 10.423911517323234 14.784819020165722 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 5 10.420750759084411 14.872026730457069 2012-Feb-06 00:56:53 LOG4 log_alfabeam: ALFABEAM 6 10.413499363506295 14.886730913791922 2012-Feb-06 00:56:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700035 2012-Feb-06 00:56:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:56:54 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-06 00:56:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:56:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:56:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:56:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:56:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-06 00:56:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17815.00 2012-Feb-06 00:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.554 (still bad) 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:56:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.557 (still bad) 2012-Feb-06 00:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.558 (still bad) 2012-Feb-06 00:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.567 (still bad) 2012-Feb-06 00:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.560 (still bad) 2012-Feb-06 00:57:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:57:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:57:05 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-06 00:57:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:57:05 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Feb-06 00:57:05 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2012-Feb-06 00:57:05 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2012-Feb-06 00:57:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 00:57:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 00:57:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 00:57:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:57:05 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Feb-06 00:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.559 (still bad) 2012-Feb-06 00:57:05 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:57:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:57:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:57:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:57:05 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Feb-06 00:57:05 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Feb-06 00:57:05 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Feb-06 00:57:05 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-06 00:57:05 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-06 00:57:05 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:57:05 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:57:05 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:57:05 LOG2 antvel: Parameters to Doppler: Topocentric 17825 2012 37 0.0 2012-Feb-06 00:57:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:57:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-06 00:57:05 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-06 00:57:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:57:05 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:57:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:57:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Feb-06 00:57:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:57:05 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Feb-06 00:57:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-06 00:57:05 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.550875 2012.1014090108247 18.999933 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000010 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 1 10.409425982689603 14.815490340600290 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 2 10.412553655414895 14.728607820333746 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 3 10.419787551295677 14.712639804882507 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 4 10.423910593316160 14.784726428037683 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 5 10.420755108554101 14.871975315525676 2012-Feb-06 00:57:05 LOG4 log_alfabeam: ALFABEAM 6 10.413504595091778 14.886770515493355 2012-Feb-06 00:57:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700036 2012-Feb-06 00:57:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:57:06 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Feb-06 00:57:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:57:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:57:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-06 00:57:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17827.00 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.493 (still bad) 2012-Feb-06 00:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-06 00:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 00:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Feb-06 00:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Feb-06 00:57:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:57:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:57:17 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Feb-06 00:57:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:57:17 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Feb-06 00:57:17 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Feb-06 00:57:17 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-06 00:57:17 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-06 00:57:17 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:57:17 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:57:17 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:57:17 LOG2 antvel: Parameters to Doppler: Topocentric 17837 2012 37 0.0 2012-Feb-06 00:57:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:57:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-06 00:57:17 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-06 00:57:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:57:17 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:57:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:57:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Feb-06 00:57:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:57:17 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2012-Feb-06 00:57:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-06 00:57:17 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.554217 2012.1014093910817 18.999933 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666663 14.799999999999997 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 1 10.409426945593831 14.815584576262872 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 2 10.412549213408722 14.728662203830442 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 3 10.419782102497459 14.712598374481868 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 4 10.423909656444973 14.784633129461094 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 5 10.420759488691099 14.871923444664244 2012-Feb-06 00:57:17 LOG4 log_alfabeam: ALFABEAM 6 10.413509869711273 14.886810358516710 2012-Feb-06 00:57:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700037 2012-Feb-06 00:57:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:57:18 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Feb-06 00:57:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:57:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:57:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-06 00:57:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17839.00 2012-Feb-06 00:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:57:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.155 (still bad) 2012-Feb-06 00:57:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 00:57:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.109 1.134 1.005 2012-Feb-06 00:57:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.926 1.006 1.101 2012-Feb-06 00:57:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.804 0.939 1.158 1.070 2012-Feb-06 00:57:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.026 1.143 0.027 2012-Feb-06 00:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.164 (still bad) 2012-Feb-06 00:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2012-Feb-06 00:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2012-Feb-06 00:57:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:57:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:57:29 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Feb-06 00:57:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:57:29 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2012-Feb-06 00:57:29 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Feb-06 00:57:29 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-06 00:57:29 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-06 00:57:29 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:57:29 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:57:29 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:57:29 LOG2 antvel: Parameters to Doppler: Topocentric 17849 2012 37 0.0 2012-Feb-06 00:57:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:57:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-06 00:57:29 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-06 00:57:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:57:29 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:57:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:57:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Feb-06 00:57:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:57:29 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-06 00:57:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-06 00:57:29 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.557560 2012.1014097713387 18.999933 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999995 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 1 10.409427922455281 14.815679587483391 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 2 10.412544737738628 14.728717100003195 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 3 10.419776605532814 14.712556671074465 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 4 10.423908705934522 14.784539061259155 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 5 10.420763902399846 14.871871081216934 2012-Feb-06 00:57:29 LOG4 log_alfabeam: ALFABEAM 6 10.413515191011649 14.886850468354199 2012-Feb-06 00:57:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700038 2012-Feb-06 00:57:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:57:30 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-06 00:57:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:57:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:57:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17851.00 2012-Feb-06 00:57:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-06 00:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.155 (still bad) 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:57:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2012-Feb-06 00:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.147 (still bad) 2012-Feb-06 00:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.154 (still bad) 2012-Feb-06 00:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.149 (still bad) 2012-Feb-06 00:57:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:57:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:57:41 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-06 00:57:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:57:41 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-06 00:57:41 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Feb-06 00:57:41 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-06 00:57:41 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-06 00:57:41 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:57:41 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:57:41 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:57:41 LOG2 antvel: Parameters to Doppler: Topocentric 17861 2012 37 0.0 2012-Feb-06 00:57:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:57:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-06 00:57:41 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-06 00:57:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:57:41 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:57:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:57:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Feb-06 00:57:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:57:41 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-06 00:57:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-06 00:57:41 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.560902 2012.1014101515959 18.999933 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 1 10.409428912912547 14.815775324898718 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 2 10.412540230799442 14.728772481916725 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 3 10.419771063176880 14.712514717959213 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 4 10.423907742135004 14.784444272276188 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 5 10.420768347325851 14.871818250813508 2012-Feb-06 00:57:41 LOG4 log_alfabeam: ALFABEAM 6 10.413520556306382 14.886890822664464 2012-Feb-06 00:57:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700039 2012-Feb-06 00:57:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:57:42 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Feb-06 00:57:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:57:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2012-Feb-06 00:57:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-06 00:57:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17863.00 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2012-Feb-06 00:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2012-Feb-06 00:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Feb-06 00:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2012-Feb-06 00:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Feb-06 00:57:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:57:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:57:53 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Feb-06 00:57:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:57:53 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-06 00:57:53 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Feb-06 00:57:53 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-06 00:57:53 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-06 00:57:53 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:57:53 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:57:53 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:57:53 LOG2 antvel: Parameters to Doppler: Topocentric 17873 2012 37 0.0 2012-Feb-06 00:57:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:57:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-06 00:57:53 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-06 00:57:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:57:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:57:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:57:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Feb-06 00:57:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:57:53 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-06 00:57:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-06 00:57:53 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.564244 2012.1014105318529 18.999826 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 1 10.409429916424482 14.815871654562617 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 2 10.412535702090878 14.728828259988850 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 3 10.419765485547209 14.712472560704144 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 4 10.423906765636826 14.784348899350064 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 5 10.420772813856722 14.871765042242274 2012-Feb-06 00:57:53 LOG4 log_alfabeam: ALFABEAM 6 10.413525955469620 14.886931374604984 2012-Feb-06 00:57:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700040 2012-Feb-06 00:57:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:57:54 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Feb-06 00:57:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:57:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:57:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-06 00:57:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-06 00:57:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17875.00 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:57:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-06 00:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 00:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 00:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 00:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Feb-06 00:58:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:58:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:58:05 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Feb-06 00:58:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:58:05 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-06 00:58:05 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Feb-06 00:58:05 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-06 00:58:05 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-06 00:58:05 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:58:05 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:58:05 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:58:05 LOG2 antvel: Parameters to Doppler: Topocentric 17885 2012 37 0.0 2012-Feb-06 00:58:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:58:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-06 00:58:05 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-06 00:58:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:58:05 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:58:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:58:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Feb-06 00:58:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:58:05 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2012-Feb-06 00:58:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-06 00:58:05 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.567587 2012.1014109121099 18.999933 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.799999999999995 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 1 10.409430936704890 14.815969122846417 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 2 10.412531116592776 14.728884793035002 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 3 10.419759833594766 14.712430005914756 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 4 10.423905772628698 14.784252388749293 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 5 10.420777337290184 14.871711102964317 2012-Feb-06 00:58:05 LOG4 log_alfabeam: ALFABEAM 6 10.413531427297160 14.886972319505386 2012-Feb-06 00:58:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700041 2012-Feb-06 00:58:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:58:06 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2012-Feb-06 00:58:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:58:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:58:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-06 00:58:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17887.00 2012-Feb-06 00:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 00:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 00:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 00:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 00:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 00:58:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:58:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:58:17 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2012-Feb-06 00:58:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:58:17 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2012-Feb-06 00:58:17 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Feb-06 00:58:17 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-06 00:58:17 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-06 00:58:17 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:58:17 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:58:17 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:58:17 LOG2 antvel: Parameters to Doppler: Topocentric 17897 2012 37 0.0 2012-Feb-06 00:58:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:58:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-06 00:58:17 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-06 00:58:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:58:17 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:58:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:58:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Feb-06 00:58:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:58:17 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2012-Feb-06 00:58:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-06 00:58:17 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.570929 2012.1014112923669 18.999933 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666663 14.800000000000004 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 1 10.409431970204555 14.816067169827262 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 2 10.412526510108162 14.728941717708985 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 3 10.419754146984522 14.712387256327116 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 4 10.423904766758728 14.784155307563001 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 5 10.420781881571326 14.871656789710469 2012-Feb-06 00:58:17 LOG4 log_alfabeam: ALFABEAM 6 10.413536932396756 14.887013453189283 2012-Feb-06 00:58:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700042 2012-Feb-06 00:58:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:58:18 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Feb-06 00:58:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:58:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:58:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-06 00:58:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17899.00 2012-Feb-06 00:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:58:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 00:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 00:58:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 00:58:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.059 1.104 0.961 2012-Feb-06 00:58:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.900 0.939 1.056 2012-Feb-06 00:58:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.763 0.906 1.072 1.022 2012-Feb-06 00:58:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.027 1.109 0.027 2012-Feb-06 00:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Feb-06 00:58:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:58:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:58:29 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Feb-06 00:58:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:58:29 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2012-Feb-06 00:58:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Feb-06 00:58:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 00:58:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 00:58:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:58:29 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2012-Feb-06 00:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Feb-06 00:58:29 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:58:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 00:58:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:58:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:58:29 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2012-Feb-06 00:58:29 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Feb-06 00:58:29 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-06 00:58:29 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-06 00:58:29 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:58:29 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:58:29 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:58:29 LOG2 antvel: Parameters to Doppler: Topocentric 17909 2012 37 0.0 2012-Feb-06 00:58:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:58:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-06 00:58:29 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-06 00:58:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:58:29 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:58:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:58:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Feb-06 00:58:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:58:29 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Feb-06 00:58:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Feb-06 00:58:29 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.574272 2012.101411672624 18.999933 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999994 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 1 10.409433018840856 14.816166031879526 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 2 10.412521868465994 14.728999186280852 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 3 10.419748409494170 14.712344225023580 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 4 10.423903746094174 14.784057417476774 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 5 10.420786460935282 14.871601953755578 2012-Feb-06 00:58:29 LOG4 log_alfabeam: ALFABEAM 6 10.413542486803957 14.887054862419705 2012-Feb-06 00:58:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700043 2012-Feb-06 00:58:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:58:30 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-06 00:58:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:58:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-06 00:58:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-06 00:58:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17911.00 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:58:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.513 (still bad) 2012-Feb-06 00:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.540 (still bad) 2012-Feb-06 00:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.543 (still bad) 2012-Feb-06 00:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.548 (still bad) 2012-Feb-06 00:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.541 (still bad) 2012-Feb-06 00:58:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:58:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:58:41 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-06 00:58:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:58:41 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Feb-06 00:58:41 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Feb-06 00:58:41 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-06 00:58:41 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-06 00:58:41 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:58:41 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:58:41 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:58:41 LOG2 antvel: Parameters to Doppler: Topocentric 17921 2012 37 0.0 2012-Feb-06 00:58:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:58:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-06 00:58:41 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-06 00:58:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:58:41 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:58:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:58:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Feb-06 00:58:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:58:41 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-06 00:58:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Feb-06 00:58:41 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.577614 2012.1014120528812 18.999933 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.799999999999994 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 1 10.409434082231320 14.816265657827051 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 2 10.412517194145249 14.729057170742784 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 3 10.419742624005025 14.712300936069807 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 4 10.423902711005725 14.783958769132427 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 5 10.420791072944148 14.871546621756590 2012-Feb-06 00:58:41 LOG4 log_alfabeam: ALFABEAM 6 10.413548087729259 14.887096524111350 2012-Feb-06 00:58:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700044 2012-Feb-06 00:58:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:58:42 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Feb-06 00:58:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:58:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-06 00:58:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-06 00:58:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17923.00 2012-Feb-06 00:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.544 (still bad) 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:58:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.612 (still bad) 2012-Feb-06 00:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.609 (still bad) 2012-Feb-06 00:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.612 (still bad) 2012-Feb-06 00:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.613 (still bad) 2012-Feb-06 00:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.608 (still bad) 2012-Feb-06 00:58:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:58:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:58:53 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Feb-06 00:58:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:58:53 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-06 00:58:53 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Feb-06 00:58:53 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-06 00:58:53 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-06 00:58:53 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:58:53 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:58:53 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:58:53 LOG2 antvel: Parameters to Doppler: Topocentric 17933 2012 37 0.0 2012-Feb-06 00:58:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:58:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-06 00:58:53 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-06 00:58:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:58:53 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Feb-06 00:58:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:58:53 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Feb-06 00:58:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Feb-06 00:58:53 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.580957 2012.1014124331382 18.999933 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 1 10.409435161261991 14.816366115365803 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 2 10.412512484047436 14.729115712269923 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 3 10.419736786495426 14.712257361875812 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 4 10.423901660629330 14.783859295466575 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 5 10.420795720663099 14.871490754352875 2012-Feb-06 00:58:53 LOG4 log_alfabeam: ALFABEAM 6 10.413553739065947 14.887138464891500 2012-Feb-06 00:58:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700045 2012-Feb-06 00:58:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:58:54 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-06 00:58:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:58:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-06 00:58:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:58:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-06 00:58:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17935.00 2012-Feb-06 00:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.608 (still bad) 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:58:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.608 (still bad) 2012-Feb-06 00:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.606 (still bad) 2012-Feb-06 00:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.605 (still bad) 2012-Feb-06 00:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.611 (still bad) 2012-Feb-06 00:59:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.601 (still bad) 2012-Feb-06 00:59:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:59:05 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-06 00:59:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:59:05 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Feb-06 00:59:05 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Feb-06 00:59:05 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-06 00:59:05 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-06 00:59:05 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:59:05 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:59:05 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:59:05 LOG2 antvel: Parameters to Doppler: Topocentric 17945 2012 37 0.0 2012-Feb-06 00:59:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:59:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-06 00:59:05 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-06 00:59:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:59:05 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:59:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:59:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Feb-06 00:59:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:59:05 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2012-Feb-06 00:59:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Feb-06 00:59:05 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.584299 2012.1014128133952 18.999933 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999997 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 1 10.409436255541655 14.816467352571841 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 2 10.412507740686248 14.729174782411249 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 3 10.419730899890540 14.712213526822707 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 4 10.423900595344204 14.783759047862327 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 5 10.420800401619868 14.871434378625700 2012-Feb-06 00:59:05 LOG4 log_alfabeam: ALFABEAM 6 10.413559437982030 14.887180661368689 2012-Feb-06 00:59:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700046 2012-Feb-06 00:59:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:59:06 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-06 00:59:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:59:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-06 00:59:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-06 00:59:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17947.00 2012-Feb-06 00:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.601 (still bad) 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:59:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.590 (still bad) 2012-Feb-06 00:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.589 (still bad) 2012-Feb-06 00:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.590 (still bad) 2012-Feb-06 00:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.595 (still bad) 2012-Feb-06 00:59:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:59:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:59:17 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-06 00:59:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:59:17 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2012-Feb-06 00:59:17 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Feb-06 00:59:17 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-06 00:59:17 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-06 00:59:17 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:59:17 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:59:17 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:59:17 LOG2 antvel: Parameters to Doppler: Topocentric 17957 2012 37 0.0 2012-Feb-06 00:59:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:59:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-06 00:59:17 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-06 00:59:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:59:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:59:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:59:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Feb-06 00:59:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:59:17 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Feb-06 00:59:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Feb-06 00:59:17 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.587642 2012.1014131936522 18.999933 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999986 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 1 10.409437365984500 14.816569438315323 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 2 10.412502960915514 14.729234423194178 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 3 10.419724960091907 14.712169402984944 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 4 10.423899514258769 14.783657958089979 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 5 10.420805118927493 14.871377454393423 2012-Feb-06 00:59:17 LOG4 log_alfabeam: ALFABEAM 6 10.413565188445194 14.887223140501654 2012-Feb-06 00:59:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700047 2012-Feb-06 00:59:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:59:18 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-06 00:59:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:59:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-06 00:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.590 (still bad) 2012-Feb-06 00:59:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17959.00 2012-Feb-06 00:59:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:59:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.590 (still bad) 2012-Feb-06 00:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.558 (still bad) 2012-Feb-06 00:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.556 (still bad) 2012-Feb-06 00:59:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-06 00:59:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.458 1.461 1.494 1.291 2012-Feb-06 00:59:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.497 1.257 1.321 1.454 2012-Feb-06 00:59:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.960 1.278 1.518 1.398 2012-Feb-06 00:59:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.437 0.023 1.561 0.023 2012-Feb-06 00:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.556 (still bad) 2012-Feb-06 00:59:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:59:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:59:29 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-06 00:59:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:59:29 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Feb-06 00:59:29 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Feb-06 00:59:29 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-06 00:59:29 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-06 00:59:29 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:59:29 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:59:29 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:59:29 LOG2 antvel: Parameters to Doppler: Topocentric 17969 2012 37 0.0 2012-Feb-06 00:59:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:59:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-06 00:59:29 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-06 00:59:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:59:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:59:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:59:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Feb-06 00:59:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:59:29 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Feb-06 00:59:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Feb-06 00:59:29 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.590984 2012.1014135739092 18.999933 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 1 10.409438492190359 14.816672319911273 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 2 10.412498147284204 14.729294605716325 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 3 10.419718970069340 14.712125015064357 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 4 10.423898417760945 14.783556078287315 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 5 10.420809870078720 14.871320009169681 2012-Feb-06 00:59:29 LOG4 log_alfabeam: ALFABEAM 6 10.413570987580181 14.887265878587808 2012-Feb-06 00:59:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700048 2012-Feb-06 00:59:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:59:30 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-06 00:59:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:59:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-06 00:59:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.556 (still bad) 2012-Feb-06 00:59:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-06 00:59:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17971.00 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:59:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.556 (still bad) 2012-Feb-06 00:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.552 (still bad) 2012-Feb-06 00:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.551 (still bad) 2012-Feb-06 00:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.556 (still bad) 2012-Feb-06 00:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.552 (still bad) 2012-Feb-06 00:59:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:59:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:59:41 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-06 00:59:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:59:41 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Feb-06 00:59:41 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Feb-06 00:59:41 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-06 00:59:41 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-06 00:59:41 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:59:41 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:59:41 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:59:41 LOG2 antvel: Parameters to Doppler: Topocentric 17981 2012 37 0.0 2012-Feb-06 00:59:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:59:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-06 00:59:41 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-06 00:59:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:59:41 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:59:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:59:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Feb-06 00:59:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-06 00:59:41 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2012-Feb-06 00:59:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Feb-06 00:59:41 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.594327 2012.1014139541664 18.999933 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999988 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 1 10.409439635102578 14.816776067430171 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 2 10.412493296597640 14.729355372880862 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 3 10.419712925645639 14.712080334796985 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 4 10.423897304930586 14.783453339032173 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 5 10.420814658235340 14.871262001928947 2012-Feb-06 00:59:41 LOG4 log_alfabeam: ALFABEAM 6 10.413576839430954 14.887308902920305 2012-Feb-06 00:59:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203700049 2012-Feb-06 00:59:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-06 00:59:42 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2012-Feb-06 00:59:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 00:59:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-06 00:59:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-06 00:59:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17983.00 2012-Feb-06 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.552 (still bad) 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 00:59:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.556 (still bad) 2012-Feb-06 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.555 (still bad) 2012-Feb-06 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.559 (still bad) 2012-Feb-06 00:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.557 (still bad) 2012-Feb-06 00:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.555 (still bad) 2012-Feb-06 00:59:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 00:59:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-06 00:59:53 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2012-Feb-06 00:59:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-06 00:59:53 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2012-Feb-06 00:59:53 INFO2 smartfreq: Switching off CAL 2012-Feb-06 00:59:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 00:59:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 00:59:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:59:53 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2012-Feb-06 00:59:53 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:59:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:59:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:59:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:59:53 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2012-Feb-06 00:59:53 INFO3 restore_frequencies: Restoring original frequencies 2012-Feb-06 00:59:53 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-06 00:59:53 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:59:53 LOG2 antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:59:53 LOG2 antvel: Parameters to Doppler: Topocentric 17993 2012 37 0.0 2012-Feb-06 00:59:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:59:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2012-Feb-06 00:59:53 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2012-Feb-06 00:59:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 00:59:53 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 00:59:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-06 00:59:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:53 STOP finish_task: Finishing task 'smart frequency switching' 2012-Feb-06 00:59:53 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-06 00:59:53 DONE finish_task: DONE finished pattern: smart frequency switching 2012-Feb-06 00:59:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:59:53 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2012-Feb-06 00:59:53 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-06 00:59:53 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock.conf' 2012-Feb-06 00:59:53 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 00:59:54 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Feb-06 00:59:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-06 00:59:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:54 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2012-Feb-06 00:59:54 LOG2 CIMA-antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.10141 J 2012-Feb-06 00:59:54 LOG2 CIMA-antvel: Computed apparent RA = 10:25:41.3 Dec = +14:44:02.4 2012-Feb-06 00:59:54 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 17993 2012 37 0.0 2012-Feb-06 00:59:54 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Feb-06 00:59:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Feb-06 00:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.555 (still bad) 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Feb-06 00:59:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2012-Feb-06 00:59:56 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 00:59:56 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Feb-06 00:59:56 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-06 00:59:56 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Feb-06 00:59:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Feb-06 00:59:57 LOG1 config_iflo: Receiver ALFA already selected 2012-Feb-06 00:59:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 00:59:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 00:59:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 00:59:57 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 00:59:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 00:59:57 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 00:59:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 00:59:57 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2012-Feb-06 00:59:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2012-Feb-06 00:59:57 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Feb-06 00:59:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2012-Feb-06 00:59:57 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2012-Feb-06 00:59:57 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2012-Feb-06 00:59:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Feb-06 00:59:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:59:57 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Feb-06 00:59:57 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: vw% DONE 2012-Feb-06 00:59:57 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Feb-06 00:59:57 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Feb-06 00:59:57 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Feb-06 00:59:57 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 DONE finish_task: DONE finished configuration: IF/LO path 2012-Feb-06 00:59:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:59:57 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Feb-06 00:59:57 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Feb-06 00:59:57 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Feb-06 00:59:57 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Feb-06 00:59:57 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-06 00:59:57 START begin_task: Starting task 'selecting calibration port' 2012-Feb-06 00:59:57 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-06 00:59:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-06 00:59:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:59:57 START begin_task: Starting task 'waiting on calport' 2012-Feb-06 00:59:57 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-06 00:59:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:58 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 00:59:58 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-06 00:59:58 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-06 00:59:58 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-06 00:59:58 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 00:59:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 00:59:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:59:58 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:58 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:59:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:59:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:59:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:59:58 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 00:59:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 00:59:58 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-06 00:59:58 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-06 00:59:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:59:58 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Feb-06 00:59:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Feb-06 00:59:58 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:59:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 00:59:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:59:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:59:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:59:58 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG3 sock_errsend: To WAPPDATA: FLUSH 2012-Feb-06 00:59:58 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Feb-06 00:59:58 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Feb-06 00:59:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 00:59:58 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Feb-06 00:59:58 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2012-Feb-06 00:59:58 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2012-Feb-06 00:59:58 INFO1 config_mock: Starting to configure the Mock spectrometer 2012-Feb-06 00:59:58 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-06 00:59:58 START begin_task: Starting task 'selecting calibration port' 2012-Feb-06 00:59:58 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-06 00:59:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-06 00:59:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:59:58 START begin_task: Starting task 'waiting on calport' 2012-Feb-06 00:59:58 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2012-Feb-06 00:59:58 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2012-Feb-06 00:59:59 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-06 00:59:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 00:59:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:59 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 00:59:59 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-06 00:59:59 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2012-Feb-06 00:59:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-06 00:59:59 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-06 00:59:59 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2012-Feb-06 00:59:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 00:59:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 00:59:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:59:59 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-06 00:59:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 00:59:59 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:59:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:59:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:59:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:59:59 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-06 00:59:59 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-06 00:59:59 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-06 00:59:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 00:59:59 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Feb-06 00:59:59 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 00:59:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 00:59:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 00:59:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 00:59:59 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Feb-06 00:59:59 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2012-Feb-06 00:59:59 LOG3 socket_wait: To MOCK: NOP 2012-Feb-06 00:59:59 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2012-Feb-06 00:59:59 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Feb-06 01:00:00 ALERT got_mock_message: Mock spectrometer restarting 2012-Feb-06 01:00:00 LOG4 from_mock: From MOCK: nop ok 2012-Feb-06 01:00:00 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2012-Feb-06 01:00:00 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Feb-06 01:00:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2012-Feb-06 01:00:00 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2012-Feb-06 01:00:00 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2012-Feb-06 01:00:00 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2012-Feb-06 01:00:00 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2012-Feb-06 01:00:00 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2012-Feb-06 01:00:01 LOG4 from_mock: From MOCK: confok 2012-Feb-06 01:00:01 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2012-Feb-06 01:00:01 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2012-Feb-06 01:00:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2012-Feb-06 01:00:01 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2012-Feb-06 01:00:01 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2012-Feb-06 01:00:01 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2012-Feb-06 01:00:01 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Feb-06 01:00:01 LOG4 from_mock: From MOCK: confok 2012-Feb-06 01:00:01 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2012-Feb-06 01:00:01 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Feb-06 01:00:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2012-Feb-06 01:00:01 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2012-Feb-06 01:00:01 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-06 01:00:01 DONE finish_task: DONE finished configuring: the Mock spectrometer 2012-Feb-06 01:00:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 01:00:01 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2012-Feb-06 01:00:01 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-06 01:00:01 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Feb-06 01:00:01 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2012-Feb-06 01:00:01 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2012-Feb-06 01:00:01 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Feb-06 01:00:01 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGESLEO_p1_053) < 094840 THEN' 2012-Feb-06 01:00:03 LOG3 is_if_valid: Current source data: up 646.8 15.2 UP - - 139 1.1 2012-Feb-06 01:00:03 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESLEO_p1_053) < 094840 2012-Feb-06 01:00:03 INFO5 is_if_valid: Condition parsed as: 9.618230333333333 < 9.8111111111111118 2012-Feb-06 01:00:03 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=291.83 alfaangle=80.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_053 ra=103500.00 dec=133000.00' 2012-Feb-06 01:00:03 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-06 01:00:03 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 01:00:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 291.83 80.5 hcorcal 5 tracking no off lcorcal first 1 AGESLEO_p1_053 103500.00 133000.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:00:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-06 01:00:03 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-06 01:00:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2012-Feb-06 01:00:04 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-06 01:00:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESLEO_p1_053} 2012-Feb-06 01:00:04 INFO3 fixed_driftmap: Sending telescope to Az = 291.83 and ZA = 12.32 2012-Feb-06 01:00:04 LOG3 track_source: Calling 'track_source AGESLEO_p1_053 291.83 12.3227426513 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:00:04 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:00:04 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-06 01:00:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_053} INFO {Slewing to source 'AGESLEO_p1_053' ...} 2012-Feb-06 01:00:04 INFO1 track_source: Starting to track AGESLEO_p1_053 2012-Feb-06 01:00:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_053" 2012-Feb-06 01:00:04 LOG3 vw_send: To DATATAKING: set ra 291.83 2012-Feb-06 01:00:04 LOG3 vw_send: To DATATAKING: set dec 12.3227426513 2012-Feb-06 01:00:04 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:00:04 LOG3 vw_send: To DATATAKING: pnt tr 291.83 12.3227426513 -CF 2012-Feb-06 01:00:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:00:04 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:00:04 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-06 01:00:04 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:00:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:00:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:00:04 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-06 01:00:04 START begin_task: Starting task 'rotate ALFA to +80.5 degrees' 2012-Feb-06 01:00:04 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-06 01:00:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +80.5 degrees ...} 2012-Feb-06 01:00:04 INFO2 rotate_alfa: ALFA commanded to +80.5 degrees 2012-Feb-06 01:00:04 LOG3 sock_errsend: To ALFAMOTOR: POSITION 80.5 REPLY 2012-Feb-06 01:00:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 01:00:04 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 01:00:04 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_053" 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: set ra 291.83 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: set dec 12.3227426513 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: vw% 291.83 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: vw% 12.3227426513 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: pnt tr 291.83 12.3227426513 -CF 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:00:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:00:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 01:00:39 INFO3 alfa_motor: ALFA rotator in-position +80.50 degrees 2012-Feb-06 01:00:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 01:00:39 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-06 01:00:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:00:39 STOP finish_task: Finishing task 'rotate ALFA to +80.5 degrees' 2012-Feb-06 01:00:39 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-06 01:00:39 INFO2 finish_task: DONE finished configuration: rotating ALFA to +80.5 degrees 2012-Feb-06 01:00:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:00:39 STOP end_task: Finishing task 'rotate ALFA to +80.5 degrees' with status 'OK' 2012-Feb-06 01:00:39 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-06 01:00:39 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 01:00:39 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-06 01:00:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 01:00:39 LOG3 waittrk: Start waittrk 5 2012-Feb-06 01:00:39 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 01:00:39 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 01:00:44 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 01:00:44 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 01:00:44 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:00:44 INFO2 waittrk: Now tracking AGESLEO_p1_053 2012-Feb-06 01:00:44 LOG4 waittrk: Current telescope position: Az = 651.42 ZA = 12.32 2012-Feb-06 01:00:44 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 01:00:44 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 01:00:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:00:44 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 01:00:44 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 01:00:44 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 01:00:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 01:00:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:00:44 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 01:00:44 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 01:00:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:00:44 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:00:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 01:00:44 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 01:00:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:00:44 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 01:00:44 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:00:44 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:00:44 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:00:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:00:44 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Feb-06 01:00:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:00:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 01:00:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:00:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:00:44 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:00:44 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Feb-06 01:00:45 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:00:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:00:45 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Feb-06 01:00:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:00:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:00:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 01:00:45 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Feb-06 01:00:45 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-06 01:00:45 INFO2 astwait: Waiting for 655 seconds from 05:00:45 to 05:11:40 UTC ... 2012-Feb-06 01:00:45 LOG4 send_obs_status: To obs_status: <1> TASKTIME 655 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 01:00:45 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-06 01:00:45 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-06 01:11:40 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 INFO3 astwait: Finished waiting 2012-Feb-06 01:11:40 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:11:40 LOG5 dopset_later: Calling 'dopset_later 60.619334130546235' 2012-Feb-06 01:11:40 INFO3 dopset_later: Setting Doppler correction for 01:12:40 (60.6 seconds from now) 2012-Feb-06 01:11:40 LOG5 antvel: Calling 'antvel 291.830000 12.322743 F Heliocentric 60.619334130546235' 2012-Feb-06 01:11:40 LOG2 antvel: Transforming current Az = 291.83 ZA = 12.32 to apparent RA = 10:35:40.8 Dec = +13:25:58.3 2012-Feb-06 01:11:40 LOG2 antvel: Parameters to Doppler: Heliocentric 18760 2012 37 0.0 2012-Feb-06 01:11:40 INFO5 antvel: Computed antenna velocity: -9.99586 km/s 2012-Feb-06 01:11:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-9.9958603240000006 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-06 01:11:40 INFO4 dopset_gen: New sky frequencies: 1381.289484 1381.289484 1381.289484 1381.289484 1381.289484 1381.289484 1381.289484 1381.289484 1381.289484 2012-Feb-06 01:11:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.289484 sky0=1381.289484 sky1=1381.289484 sky2=1381.289484 sky3=1381.289484 sky4=1381.289484 sky5=1381.289484 sky6=1381.289484 sky7=1381.289484 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 01:11:40 LOG2 dopset_gen: Result from 'sky2syn': 1631.289484 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631289484.0} 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 01:11:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-06 01:11:40 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-06 01:11:40 INFO5 fixed_driftmap: Tracking J2000 position: RA = 10:34:04.5 Dec = +13:29:44.2 2012-Feb-06 01:11:40 LOG3 track_source: Calling 'track_source AGESLEO_p1_053 103404.5 132944.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:11:40 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:11:40 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_053} INFO {Slewing to source 'AGESLEO_p1_053' ...} 2012-Feb-06 01:11:40 INFO1 track_source: Starting to track AGESLEO_p1_053 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_053" 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: set ra 103404.5 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: set dec 132944.2 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: pnt tr 103404.5 132944.2 -CJ 2012-Feb-06 01:11:40 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:11:40 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:11:40 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:11:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:11:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:11:40 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 01:11:40 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 01:11:40 LOG3 waittrk: Start waittrk 5 2012-Feb-06 01:11:40 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 01:11:40 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631289484.0} 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_053" 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: set ra 103404.5 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: set dec 132944.2 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: vw% 103404.5 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: vw% 132944.2 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: pnt tr 103404.5 132944.2 -CJ 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:11:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:11:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 01:11:45 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-06 01:11:45 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 01:11:45 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Feb-06 01:11:47 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 01:11:47 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Feb-06 01:11:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:11:47 INFO2 waittrk: Now tracking AGESLEO_p1_053 2012-Feb-06 01:11:47 LOG4 waittrk: Current telescope position: Az = 651.47 ZA = 12.31 2012-Feb-06 01:11:47 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 01:11:47 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-06 01:11:47 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 01:11:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:11:47 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 01:11:47 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-06 01:11:47 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-06 01:11:47 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-06 01:11:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-06 01:11:47 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-06 01:11:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 01:11:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 01:11:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:11:47 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 01:11:47 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-06 01:11:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 01:11:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:11:50 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:11:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 01:11:50 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-06 01:11:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 01:11:50 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 01:11:50 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-06 01:11:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 01:11:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:11:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:11:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:11:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:11:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 01:11:50 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-06 01:11:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:11:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 01:11:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-06 01:11:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 2 3 dB 2012-Feb-06 01:11:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-06 01:11:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-06 01:11:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 01:11:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 01:11:51 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-06 01:11:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.038 1.034 ALFA beam 1: 1.069 0.915 2012-Feb-06 01:11:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.906 0.912 ALFA beam 3: 0.981 1.032 2012-Feb-06 01:11:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.774 0.897 ALFA beam 5: 1.076 1.032 2012-Feb-06 01:11:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.984 0.014 ALFA beam 7: 1.069 0.014 2012-Feb-06 01:11:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 01:11:51 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-06 01:11:51 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 01:11:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:11:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 01:11:51 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-06 01:11:51 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-06 01:11:51 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-06 01:11:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 01:11:51 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-06 01:11:51 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-06 01:11:51 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-06 01:11:51 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-06 01:11:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 01:11:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 1.034 1.069 0.915 2012-Feb-06 01:11:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.912 0.981 1.032 2012-Feb-06 01:11:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 0.897 1.076 1.032 2012-Feb-06 01:11:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.069 0.014 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.6 26.9 B 29.8 29.9 mn:A 0.1 0.0 B -0.2 -0.4 gn: 11 11 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.0 29.7 B 27.8 29.4 mn:A 0.0 -0.5 B -0.6 0.1 gn: 12 11 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.5 27.6 B 33.1 28.7 mn:A 0.4 0.6 B 0.2 -0.1 gn: 7 11 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.7 30.1 B 31.2 31.2 mn:A -0.3 -0.3 B 0.5 0.2 gn: 9 10 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.7 27.8 B 30.7 32.2 mn:A -0.1 -0.4 B 0.3 0.1 gn: 10 12 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.4 29.7 B 31.3 29.1 mn:A 0.2 -0.1 B 0.1 0.3 gn: 11 12 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.5 31.2 B 30.1 26.8 mn:A 0.4 -0.3 B 0.1 -0.2 gn: 13 12 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.5 28.9 B 28.7 29.9 mn:A -0.2 0.3 B 0.2 0.1 gn: 12 12 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.2 28.3 B 28.5 28.7 mn:A -0.3 -0.2 B -0.4 0.0 gn: 13 11 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.4 28.4 B 31.7 30.5 mn:A 0.0 -0.1 B -0.2 0.2 gn: 16 13 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.1 29.9 B 29.4 29.4 mn:A 0.7 0.6 B 0.1 0.6 gn: 13 11 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.5 31.3 B 29.7 29.5 mn:A -0.2 0.3 B -0.1 0.4 gn: 13 11 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.7 28.1 B 15.2 15.7 mn:A -0.4 0.2 B 0.5 -0.2 gn: 13 31 2012-Feb-06 01:11:58 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.4 28.5 B 12.2 11.8 mn:A 0.6 0.4 B 0.1 0.2 gn: 14 31 2012-Feb-06 01:11:58 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-06 01:11:58 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-06 01:11:58 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-06 01:11:58 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-06 01:11:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:11:58 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-06 01:11:58 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 01:11:58 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-06 01:11:58 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-06 01:11:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:11:58 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-06 01:11:58 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 01:11:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 01:11:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 01:11:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 01:11:58 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-06 01:11:58 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-06 01:11:58 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-06 01:11:58 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 01:11:58 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 01:11:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 01:11:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:11:58 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 01:11:58 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2012-Feb-06 01:11:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 01:11:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 01:11:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:11:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:11:59 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:11:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 01:11:59 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2012-Feb-06 01:11:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 01:11:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:11:59 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 01:11:59 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:11:59 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Feb-06 01:11:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:11:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0001.fits 2012-Feb-06 01:11:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120206.a2048.0001.fits} 2012-Feb-06 01:12:00 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:12:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:12:00 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:12:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 01:12:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:12:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:12:00 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:12:00 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:12:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:12:00 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:12:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:12:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 01:12:00 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-06 01:12:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 01:12:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 01:12:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 01:12:00 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 01:12:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 01:12:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 01:12:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 01:12:00 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-06 01:12:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 01:12:00 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-06 01:12:00 LOG5 log_alfabeam: Parameters: 10.567916666666667 13.495611111111113 9.799888 2012.1014373399751 80.499924 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 0 10.567916666666665 13.495611111111115 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 1 10.565737159181170 13.588027460498061 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 2 10.560950472836620 13.526772570943555 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 3 10.563093875609260 13.434340211690612 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 4 10.570047303974446 13.402664651516430 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 5 10.574887342655142 13.464644923099621 2012-Feb-06 01:12:00 LOG4 log_alfabeam: ALFABEAM 6 10.572720378244114 13.557576653404618 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_053 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: patternid=203700036 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: scanid=203700050 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456289484.0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306289484.0 2012-Feb-06 01:12:00 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 01:12:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 01:12:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGESLEO_p1_053:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203700036:scanid=203700050:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456289484.0:topobfreqhz=1306289484.0:filetype=1 2012-Feb-06 01:12:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 01:12:00 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 01:12:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 01:12:00 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 01:12:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 01:12:00 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 01:12:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 01:12:00 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG4 from_mock: From MOCK: starok 2012-Feb-06 01:12:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 01:12:00 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Feb-06 01:12:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 01:12:00 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700050 2012-Feb-06 01:12:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 01:12:01 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Feb-06 01:12:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 01:12:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 01:12:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 01:12:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-06 01:12:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18722.00 2012-Feb-06 01:12:03 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 01:12:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 01:12:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:06 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:12:06.01 2012-Feb-06 01:12:06 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328505126.01 Mon Feb 6 01:12:06 2012 2012-Feb-06 01:12:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.289484 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.499 (still bad) 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 01:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 01:12:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 01:12:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 01:12:12 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 01:12:12 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 01:12:12 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 01:12:12 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 01:12:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 01:12:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 01:12:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 01:12:12 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 01:12:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 01:12:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 01:12:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 01:12:12 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-06 01:12:12 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 01:12:12 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-06 01:12:12 LOG5 log_alfabeam: Parameters: 10.567916666666667 13.495611111111113 9.803230 2012.1014377202323 80.499924 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 0 10.567916666666669 13.495611111111112 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 1 10.565746382823672 13.588073065717241 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 2 10.560953628035934 13.526922207472452 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 3 10.563087672473555 13.434444923315192 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 4 10.570037857919260 13.402618139117227 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 5 10.574884227105457 13.464496078050946 2012-Feb-06 01:12:12 LOG4 log_alfabeam: ALFABEAM 6 10.572726572439070 13.557475014640286 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_053 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: patternid=203700036 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: scanid=203700051 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456289484.0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306289484.0 2012-Feb-06 01:12:12 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 01:12:12 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 01:12:12 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGESLEO_p1_053:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203700036:scanid=203700051:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456289484.0:topobfreqhz=1306289484.0:filetype=1 2012-Feb-06 01:12:12 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 01:12:12 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 01:12:12 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 01:12:12 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 01:12:12 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 01:12:12 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 01:12:12 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 01:12:12 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG4 from_mock: From MOCK: starok 2012-Feb-06 01:12:12 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 01:12:12 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 01:12:12 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700051 2012-Feb-06 01:12:12 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 01:12:12 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Feb-06 01:12:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 01:12:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-06 01:12:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18733.00 2012-Feb-06 01:12:13 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 01:12:13 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.524 (still bad) 2012-Feb-06 01:12:15 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 01:12:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 01:12:15 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:15 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:12:18 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:12:18.00 2012-Feb-06 01:12:18 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328505138.00 Mon Feb 6 01:12:18 2012 2012-Feb-06 01:12:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.289484 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 01:12:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 01:12:18 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-06 01:12:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.077 (still bad) 2012-Feb-06 01:12:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 01:12:24 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 01:12:24 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 01:12:24 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 01:12:24 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 01:12:24 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-06 01:12:24 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-06 01:12:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:12:24 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-06 01:12:24 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-06 01:12:24 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 291.83 and ZA = 12.32 2012-Feb-06 01:12:24 LOG3 track_source: Calling 'track_source AGESLEO_p1_053 291.83 12.3227426513 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:12:24 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:12:24 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_053} INFO {Slewing to source 'AGESLEO_p1_053' ...} 2012-Feb-06 01:12:24 INFO1 track_source: Starting to track AGESLEO_p1_053 2012-Feb-06 01:12:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_053" 2012-Feb-06 01:12:24 LOG3 vw_send: To DATATAKING: set ra 291.83 2012-Feb-06 01:12:24 LOG3 vw_send: To DATATAKING: set dec 12.3227426513 2012-Feb-06 01:12:24 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:12:24 LOG3 vw_send: To DATATAKING: pnt tr 291.83 12.3227426513 -CF 2012-Feb-06 01:12:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:12:24 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:12:24 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:12:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:12:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:12:24 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 LOG1 fixed_driftmap: Parameters: HA = -00:47:00.6 Start = 09:48:40.3 LST = 09:48:23.7 diff = 16.7 secs 2012-Feb-06 01:12:24 INFO2 fixed_driftmap: Waiting 14.7 seconds for RA 10:35:41 2012-Feb-06 01:12:24 INFO2 lstwait: Waiting for 14.6 secs from LST 09:48:24 to LST 09:48:38 ... 2012-Feb-06 01:12:24 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.623664547183372 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 01:12:24 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-06 01:12:24 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_053" 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: set ra 291.83 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: set dec 12.3227426513 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: vw% 291.83 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: vw% 12.3227426513 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: pnt tr 291.83 12.3227426513 -CF 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:12:24 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-06 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.077 (still bad) 2012-Feb-06 01:12:39 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-06 01:12:39 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG4 lstwait: Finished waiting 0.38 seconds late 2012-Feb-06 01:12:39 INFO3 lstwait: Finished waiting 2012-Feb-06 01:12:39 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:12:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-06 01:12:39 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 01:12:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-06 01:12:39 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-06 01:12:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 01:12:39 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-06 01:12:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_053 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: patternid=203700052 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: scanid=203700052 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456289484.0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306289484.0 2012-Feb-06 01:12:39 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 01:12:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 01:12:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGESLEO_p1_053:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203700052:scanid=203700052:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456289484.0:topobfreqhz=1306289484.0:filetype=1 2012-Feb-06 01:12:39 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 01:12:39 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 01:12:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 01:12:39 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 01:12:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 01:12:39 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-06 01:12:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 01:12:39 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG4 from_mock: From MOCK: starok 2012-Feb-06 01:12:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 01:12:39 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 01:12:39 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203700052 2012-Feb-06 01:12:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 01:12:39 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Feb-06 01:12:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 01:12:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 01:12:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 01:12:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-06 01:12:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18760.00 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.289484 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 01:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.289484 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.076 (still bad) 2012-Feb-06 01:12:42 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 01:12:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-06 01:12:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.073 (still bad) 2012-Feb-06 01:12:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:12:45.00 2012-Feb-06 01:12:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328505165.00 Mon Feb 6 01:12:45 2012 2012-Feb-06 01:12:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.077 (still bad) 2012-Feb-06 01:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.075 (still bad) 2012-Feb-06 01:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.077 (still bad) 2012-Feb-06 01:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:12:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:12:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 1.032 1.070 0.919 2012-Feb-06 01:12:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.911 0.989 1.042 2012-Feb-06 01:12:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 0.892 1.077 1.030 2012-Feb-06 01:12:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.027 1.068 0.027 2012-Feb-06 01:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.083 (still bad) 2012-Feb-06 01:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.084 (still bad) 2012-Feb-06 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.087 (still bad) 2012-Feb-06 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.090 (still bad) 2012-Feb-06 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Feb-06 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Feb-06 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Feb-06 01:13:43 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:13:43.296 (seconds: 4423.296)!} 2012-Feb-06 01:13:43 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:13:43.296 (seconds: 4423.296)! 2012-Feb-06 01:13:44 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 4422.0 to 4423.0! 2012-Feb-06 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.090 (still bad) 2012-Feb-06 01:13:45 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (4422.0 - 4424.0)! 2012-Feb-06 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.088 (still bad) 2012-Feb-06 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.083 (still bad) 2012-Feb-06 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:13:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:13:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.042 1.070 0.919 2012-Feb-06 01:13:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.909 0.980 1.032 2012-Feb-06 01:13:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 0.899 1.077 1.031 2012-Feb-06 01:13:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.027 1.067 0.027 2012-Feb-06 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.071 (still bad) 2012-Feb-06 01:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.071 (still bad) 2012-Feb-06 01:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.071 (still bad) 2012-Feb-06 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:14:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:14:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.034 1.067 0.917 2012-Feb-06 01:14:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.907 0.981 1.030 2012-Feb-06 01:14:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 0.889 1.072 1.030 2012-Feb-06 01:14:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.027 1.069 0.027 2012-Feb-06 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.076 (still bad) 2012-Feb-06 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.075 (still bad) 2012-Feb-06 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.074 (still bad) 2012-Feb-06 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.073 (still bad) 2012-Feb-06 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.073 (still bad) 2012-Feb-06 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.075 (still bad) 2012-Feb-06 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.074 (still bad) 2012-Feb-06 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.074 (still bad) 2012-Feb-06 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.077 (still bad) 2012-Feb-06 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.076 (still bad) 2012-Feb-06 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.073 (still bad) 2012-Feb-06 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.078 (still bad) 2012-Feb-06 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.081 (still bad) 2012-Feb-06 01:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:15:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:15:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.036 1.071 0.921 2012-Feb-06 01:15:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.910 0.984 1.034 2012-Feb-06 01:15:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.893 1.076 1.032 2012-Feb-06 01:15:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.027 1.070 0.027 2012-Feb-06 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.071 (still bad) 2012-Feb-06 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:17:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:17:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 1.034 1.067 0.918 2012-Feb-06 01:17:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.911 0.981 1.033 2012-Feb-06 01:17:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 0.890 1.080 1.037 2012-Feb-06 01:17:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.027 1.068 0.027 2012-Feb-06 01:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2012-Feb-06 01:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.090 (still bad) 2012-Feb-06 01:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.084 (still bad) 2012-Feb-06 01:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2012-Feb-06 01:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:18:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:18:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.032 1.068 0.918 2012-Feb-06 01:18:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.912 0.982 1.033 2012-Feb-06 01:18:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 0.912 1.076 1.030 2012-Feb-06 01:18:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.026 1.067 0.027 2012-Feb-06 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.081 (still bad) 2012-Feb-06 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.083 (still bad) 2012-Feb-06 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:19:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:19:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 1.037 1.070 0.918 2012-Feb-06 01:19:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.910 0.985 1.038 2012-Feb-06 01:19:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 0.903 1.075 1.032 2012-Feb-06 01:19:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.026 1.069 0.027 2012-Feb-06 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.081 (still bad) 2012-Feb-06 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:20:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:20:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 1.033 1.070 0.918 2012-Feb-06 01:20:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.903 0.910 0.981 1.031 2012-Feb-06 01:20:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 0.889 1.075 1.030 2012-Feb-06 01:20:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.027 1.070 0.027 2012-Feb-06 01:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.083 (still bad) 2012-Feb-06 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.084 (still bad) 2012-Feb-06 01:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:21:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.035 1.071 0.919 2012-Feb-06 01:21:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.905 0.911 0.983 1.033 2012-Feb-06 01:21:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 0.891 1.074 1.032 2012-Feb-06 01:21:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.027 1.075 0.027 2012-Feb-06 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:22:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:22:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.036 1.072 0.920 2012-Feb-06 01:22:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.912 0.982 1.033 2012-Feb-06 01:22:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.893 1.076 1.032 2012-Feb-06 01:22:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.027 1.072 0.027 2012-Feb-06 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.078 (still bad) 2012-Feb-06 01:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.075 (still bad) 2012-Feb-06 01:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.074 (still bad) 2012-Feb-06 01:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.072 (still bad) 2012-Feb-06 01:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.075 (still bad) 2012-Feb-06 01:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.078 (still bad) 2012-Feb-06 01:23:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-06 01:23:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.034 1.071 0.920 2012-Feb-06 01:23:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.912 0.984 1.034 2012-Feb-06 01:23:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 0.893 1.075 1.031 2012-Feb-06 01:23:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.023 1.071 0.024 2012-Feb-06 01:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.075 (still bad) 2012-Feb-06 01:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.077 (still bad) 2012-Feb-06 01:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.076 (still bad) 2012-Feb-06 01:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.076 (still bad) 2012-Feb-06 01:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.079 (still bad) 2012-Feb-06 01:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.076 (still bad) 2012-Feb-06 01:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.076 (still bad) 2012-Feb-06 01:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.076 (still bad) 2012-Feb-06 01:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.074 (still bad) 2012-Feb-06 01:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.073 (still bad) 2012-Feb-06 01:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.079 (still bad) 2012-Feb-06 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.084 (still bad) 2012-Feb-06 01:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.089 (still bad) 2012-Feb-06 01:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2012-Feb-06 01:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.087 (still bad) 2012-Feb-06 01:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.090 (still bad) 2012-Feb-06 01:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2012-Feb-06 01:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 01:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.088 (still bad) 2012-Feb-06 01:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.082 (still bad) 2012-Feb-06 01:24:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:24:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.032 1.071 0.921 2012-Feb-06 01:24:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.911 0.982 1.033 2012-Feb-06 01:24:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.893 1.081 1.036 2012-Feb-06 01:24:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.026 1.071 0.027 2012-Feb-06 01:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.081 (still bad) 2012-Feb-06 01:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.082 (still bad) 2012-Feb-06 01:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.082 (still bad) 2012-Feb-06 01:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.088 (still bad) 2012-Feb-06 01:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:25:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 1.035 1.068 0.917 2012-Feb-06 01:25:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.913 0.984 1.036 2012-Feb-06 01:25:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.892 1.075 1.030 2012-Feb-06 01:25:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.027 1.072 0.027 2012-Feb-06 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.081 (still bad) 2012-Feb-06 01:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:26:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:26:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.038 1.073 0.920 2012-Feb-06 01:26:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.909 0.986 1.037 2012-Feb-06 01:26:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.894 1.078 1.033 2012-Feb-06 01:26:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.026 1.070 0.027 2012-Feb-06 01:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.079 (still bad) 2012-Feb-06 01:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.079 (still bad) 2012-Feb-06 01:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.081 (still bad) 2012-Feb-06 01:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.079 (still bad) 2012-Feb-06 01:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.083 (still bad) 2012-Feb-06 01:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Feb-06 01:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Feb-06 01:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Feb-06 01:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Feb-06 01:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Feb-06 01:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.089 (still bad) 2012-Feb-06 01:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:27:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:27:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 1.041 1.071 0.919 2012-Feb-06 01:27:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.906 0.909 0.983 1.033 2012-Feb-06 01:27:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 0.892 1.076 1.034 2012-Feb-06 01:27:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.026 1.072 0.026 2012-Feb-06 01:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.083 (still bad) 2012-Feb-06 01:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.081 (still bad) 2012-Feb-06 01:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.077 (still bad) 2012-Feb-06 01:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.079 (still bad) 2012-Feb-06 01:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.078 (still bad) 2012-Feb-06 01:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.071 (still bad) 2012-Feb-06 01:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:28:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:28:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.037 1.070 0.919 2012-Feb-06 01:28:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.910 0.985 1.038 2012-Feb-06 01:28:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.890 1.072 1.032 2012-Feb-06 01:28:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.027 1.069 0.027 2012-Feb-06 01:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.079 (still bad) 2012-Feb-06 01:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.071 (still bad) 2012-Feb-06 01:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.072 (still bad) 2012-Feb-06 01:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:29:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:29:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.036 1.070 0.918 2012-Feb-06 01:29:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.904 0.912 0.980 1.035 2012-Feb-06 01:29:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.893 1.074 1.034 2012-Feb-06 01:29:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.027 1.069 0.027 2012-Feb-06 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.084 (still bad) 2012-Feb-06 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.082 (still bad) 2012-Feb-06 01:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.083 (still bad) 2012-Feb-06 01:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:30:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:30:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 1.035 1.070 0.921 2012-Feb-06 01:30:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.907 0.912 0.984 1.036 2012-Feb-06 01:30:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.892 1.075 1.032 2012-Feb-06 01:30:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.027 1.072 0.027 2012-Feb-06 01:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.080 (still bad) 2012-Feb-06 01:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.074 (still bad) 2012-Feb-06 01:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.074 (still bad) 2012-Feb-06 01:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.078 (still bad) 2012-Feb-06 01:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.074 (still bad) 2012-Feb-06 01:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.075 (still bad) 2012-Feb-06 01:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.075 (still bad) 2012-Feb-06 01:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.074 (still bad) 2012-Feb-06 01:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.073 (still bad) 2012-Feb-06 01:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.075 (still bad) 2012-Feb-06 01:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.072 (still bad) 2012-Feb-06 01:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.074 (still bad) 2012-Feb-06 01:31:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 01:31:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.041 1.075 0.925 2012-Feb-06 01:31:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.918 0.988 1.041 2012-Feb-06 01:31:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 0.898 1.078 1.035 2012-Feb-06 01:31:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.021 1.074 0.021 2012-Feb-06 01:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.073 (still bad) 2012-Feb-06 01:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.074 (still bad) 2012-Feb-06 01:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.072 (still bad) 2012-Feb-06 01:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.079 (still bad) 2012-Feb-06 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.073 (still bad) 2012-Feb-06 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.078 (still bad) 2012-Feb-06 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.080 (still bad) 2012-Feb-06 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.077 (still bad) 2012-Feb-06 01:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:32:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Feb-06 01:32:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.037 1.072 0.922 2012-Feb-06 01:32:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.913 0.984 1.038 2012-Feb-06 01:32:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 0.898 1.075 1.034 2012-Feb-06 01:32:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.027 1.077 0.027 2012-Feb-06 01:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.074 (still bad) 2012-Feb-06 01:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.075 (still bad) 2012-Feb-06 01:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.076 (still bad) 2012-Feb-06 01:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.076 (still bad) 2012-Feb-06 01:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 01:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:32:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 01:32:46 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 01:32:46 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 01:32:46 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Feb-06 01:32:46 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 01:32:46 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Feb-06 01:32:46 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-06 01:32:46 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-06 01:32:46 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-06 01:32:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 01:32:46 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-06 01:32:46 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-06 01:32:46 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2012-Feb-06 01:32:46 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGESLEO_p1_055) < 101240 THEN' 2012-Feb-06 01:32:47 LOG3 is_if_valid: Current source data: up 666.7 8.1 UP - - 106 1.7 2012-Feb-06 01:32:47 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESLEO_p1_055) < 101240 2012-Feb-06 01:32:47 INFO5 is_if_valid: Condition parsed as: 10.175280333333335 < 10.21111111111111 2012-Feb-06 01:32:47 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=311.12 alfaangle=62.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_055 ra=103500.00 dec=132700.00' 2012-Feb-06 01:32:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-06 01:32:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 01:32:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 311.12 62.0 hcorcal 5 tracking no off lcorcal first 1 AGESLEO_p1_055 103500.00 132700.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:32:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-06 01:32:48 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-06 01:32:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESLEO_p1_053' 2012-Feb-06 01:32:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-06 01:32:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESLEO_p1_055} 2012-Feb-06 01:32:48 INFO3 fixed_driftmap: Sending telescope to Az = 311.12 and ZA = 7.44 2012-Feb-06 01:32:48 LOG3 track_source: Calling 'track_source AGESLEO_p1_055 311.12 7.4357896758 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:32:48 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:32:48 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-06 01:32:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_055} INFO {Slewing to source 'AGESLEO_p1_055' ...} 2012-Feb-06 01:32:48 INFO1 track_source: Starting to track AGESLEO_p1_055 2012-Feb-06 01:32:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_055" 2012-Feb-06 01:32:48 LOG3 vw_send: To DATATAKING: set ra 311.12 2012-Feb-06 01:32:48 LOG3 vw_send: To DATATAKING: set dec 7.4357896758 2012-Feb-06 01:32:48 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:32:48 LOG3 vw_send: To DATATAKING: pnt tr 311.12 7.4357896758 -CF 2012-Feb-06 01:32:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:32:48 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:32:48 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-06 01:32:48 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:32:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:32:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:32:48 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-06 01:32:48 START begin_task: Starting task 'rotate ALFA to +62 degrees' 2012-Feb-06 01:32:48 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-06 01:32:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +62 degrees ...} 2012-Feb-06 01:32:48 INFO2 rotate_alfa: ALFA commanded to +62.0 degrees 2012-Feb-06 01:32:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 62.0 REPLY 2012-Feb-06 01:32:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 01:32:48 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 01:32:48 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_055" 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: set ra 311.12 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: set dec 7.4357896758 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: vw% 311.12 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: vw% 7.4357896758 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: pnt tr 311.12 7.4357896758 -CF 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.075 (still bad) 2012-Feb-06 01:33:00 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 01:33:00 INFO3 alfa_motor: ALFA rotator in-position +62.00 degrees 2012-Feb-06 01:33:00 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 01:33:00 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-06 01:33:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:33:00 STOP finish_task: Finishing task 'rotate ALFA to +62 degrees' 2012-Feb-06 01:33:00 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-06 01:33:00 INFO2 finish_task: DONE finished configuration: rotating ALFA to +62 degrees 2012-Feb-06 01:33:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:33:00 STOP end_task: Finishing task 'rotate ALFA to +62 degrees' with status 'OK' 2012-Feb-06 01:33:00 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-06 01:33:00 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 01:33:00 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-06 01:33:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 01:33:00 LOG3 waittrk: Start waittrk 5 2012-Feb-06 01:33:00 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 01:33:00 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-06 01:33:05 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 01:33:05 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-06 01:33:05 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 01:33:05 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Feb-06 01:34:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 01:34:56 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Feb-06 01:34:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:34:56 INFO2 waittrk: Now tracking AGESLEO_p1_055 2012-Feb-06 01:34:56 LOG4 waittrk: Current telescope position: Az = 670.71 ZA = 7.42 2012-Feb-06 01:34:56 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 01:34:56 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-06 01:34:56 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 01:34:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:34:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 01:34:56 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-06 01:34:56 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 01:34:56 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Feb-06 01:34:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 01:34:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 01:34:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:34:57 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 01:34:57 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2012-Feb-06 01:34:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 01:34:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:34:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:34:58 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:34:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 01:34:58 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2012-Feb-06 01:34:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 01:34:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:34:58 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 01:34:58 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:34:58 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Feb-06 01:34:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:34:58 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:34:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:34:58 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Feb-06 01:34:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:34:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 01:34:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:34:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:34:58 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:34:58 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Feb-06 01:34:58 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:34:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:34:58 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Feb-06 01:34:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:34:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:34:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 01:34:58 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Feb-06 01:34:58 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-06 01:34:58 INFO2 astwait: Waiting for 38 seconds from 05:34:58 to 05:35:36 UTC ... 2012-Feb-06 01:34:58 LOG4 send_obs_status: To obs_status: <1> TASKTIME 38 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 01:34:58 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-06 01:34:58 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-06 01:35:36 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 INFO3 astwait: Finished waiting 2012-Feb-06 01:35:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:35:36 LOG5 dopset_later: Calling 'dopset_later 60.951931839429982' 2012-Feb-06 01:35:36 INFO3 dopset_later: Setting Doppler correction for 01:36:36 (61 seconds from now) 2012-Feb-06 01:35:36 LOG5 antvel: Calling 'antvel 311.120000 7.435790 F Heliocentric 60.951931839429982' 2012-Feb-06 01:35:36 LOG2 antvel: Transforming current Az = 311.12 ZA = 7.44 to apparent RA = 10:35:40.8 Dec = +13:22:58.3 2012-Feb-06 01:35:36 LOG2 antvel: Parameters to Doppler: Heliocentric 20196 2012 37 0.0 2012-Feb-06 01:35:36 INFO5 antvel: Computed antenna velocity: -9.95303 km/s 2012-Feb-06 01:35:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-9.9530337331999998 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-06 01:35:36 INFO4 dopset_gen: New sky frequencies: 1381.289287 1381.289287 1381.289287 1381.289287 1381.289287 1381.289287 1381.289287 1381.289287 1381.289287 2012-Feb-06 01:35:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.289287 sky0=1381.289287 sky1=1381.289287 sky2=1381.289287 sky3=1381.289287 sky4=1381.289287 sky5=1381.289287 sky6=1381.289287 sky7=1381.289287 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 01:35:36 LOG2 dopset_gen: Result from 'sky2syn': 1631.289287 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631289287.0} 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 01:35:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-06 01:35:36 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-06 01:35:36 INFO5 fixed_driftmap: Tracking J2000 position: RA = 10:34:04.2 Dec = +13:26:44.2 2012-Feb-06 01:35:36 LOG3 track_source: Calling 'track_source AGESLEO_p1_055 103404.2 132644.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:35:36 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:35:36 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_055} INFO {Slewing to source 'AGESLEO_p1_055' ...} 2012-Feb-06 01:35:36 INFO1 track_source: Starting to track AGESLEO_p1_055 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_055" 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: set ra 103404.2 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: set dec 132644.2 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: pnt tr 103404.2 132644.2 -CJ 2012-Feb-06 01:35:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:35:36 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:35:36 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:35:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:35:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:35:36 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 01:35:36 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 01:35:36 LOG3 waittrk: Start waittrk 5 2012-Feb-06 01:35:36 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 01:35:36 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631289287.0} 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_055" 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: set ra 103404.2 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: set dec 132644.2 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: vw% 103404.2 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: vw% 132644.2 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: pnt tr 103404.2 132644.2 -CJ 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:35:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:35:41 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 01:35:41 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Feb-06 01:35:41 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 01:35:41 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Feb-06 01:35:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 01:35:43 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Feb-06 01:35:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:35:43 INFO2 waittrk: Now tracking AGESLEO_p1_055 2012-Feb-06 01:35:43 LOG4 waittrk: Current telescope position: Az = 670.82 ZA = 7.41 2012-Feb-06 01:35:43 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 01:35:43 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-06 01:35:43 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 01:35:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:35:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 01:35:43 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-06 01:35:43 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-06 01:35:43 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-06 01:35:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-06 01:35:43 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-06 01:35:43 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 01:35:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 01:35:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:35:43 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 01:35:43 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Feb-06 01:35:43 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 01:35:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:35:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:35:46 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:35:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 01:35:46 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Feb-06 01:35:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 01:35:46 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 01:35:46 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-06 01:35:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 01:35:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:35:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:35:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:35:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 01:35:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 01:35:46 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Feb-06 01:35:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 01:35:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:35:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-06 01:35:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-06 01:35:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-06 01:35:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-06 01:35:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 01:35:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 01:35:47 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Feb-06 01:35:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.010 1.021 ALFA beam 1: 1.043 0.902 2012-Feb-06 01:35:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.065 1.085 ALFA beam 3: 0.952 1.010 2012-Feb-06 01:35:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.771 1.106 ALFA beam 5: 1.058 1.014 2012-Feb-06 01:35:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.978 0.014 ALFA beam 7: 1.062 0.014 2012-Feb-06 01:35:47 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 01:35:47 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-06 01:35:47 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 01:35:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:35:47 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 01:35:47 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-06 01:35:47 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-06 01:35:47 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-06 01:35:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 01:35:47 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-06 01:35:47 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-06 01:35:47 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-06 01:35:47 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Feb-06 01:35:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 01:35:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.021 1.043 0.902 2012-Feb-06 01:35:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.085 0.952 1.010 2012-Feb-06 01:35:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.106 1.058 1.014 2012-Feb-06 01:35:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.014 1.062 0.014 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b0s0g0 rms:A 34.1 30.0 B 29.8 29.9 mn:A 0.1 -0.1 B -0.2 -0.3 gn: 12 11 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b0s1g0 rms:A 35.2 33.7 B 34.4 36.4 mn:A 0.0 -0.5 B -0.6 0.1 gn: 12 12 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b1s0g0 rms:A 32.5 30.4 B 32.8 28.5 mn:A 0.5 0.6 B 0.3 -0.1 gn: 8 11 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b1s1g0 rms:A 34.4 31.8 B 36.3 36.3 mn:A -0.3 -0.5 B 0.6 0.2 gn: 9 10 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.3 30.4 B 30.1 31.5 mn:A -0.0 -0.3 B 0.3 0.1 gn: 11 12 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b2s1g0 rms:A 33.7 34.1 B 36.8 34.1 mn:A 0.3 -0.2 B 0.1 0.3 gn: 11 12 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b3s0g0 rms:A 30.9 30.7 B 33.3 29.7 mn:A 0.4 -0.3 B 0.0 -0.2 gn: 13 13 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b3s1g0 rms:A 40.0 39.1 B 33.2 34.5 mn:A -0.2 0.4 B 0.2 0.2 gn: 12 12 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.1 28.2 B 28.4 28.6 mn:A -0.4 -0.2 B -0.5 0.0 gn: 13 11 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b4s1g0 rms:A 34.7 31.5 B 34.1 32.9 mn:A -0.0 -0.0 B -0.3 0.2 gn: 16 13 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.8 29.7 B 29.2 29.2 mn:A 0.6 0.7 B 0.1 0.6 gn: 13 11 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b5s1g0 rms:A 35.6 35.4 B 32.4 32.1 mn:A -0.2 0.3 B -0.0 0.4 gn: 13 11 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.6 28.0 B 14.4 14.8 mn:A -0.4 0.2 B 0.5 -0.2 gn: 13 31 2012-Feb-06 01:35:54 INFO3 from_mock: From MOCK: b6s1g0 rms:A 36.4 33.0 B 11.5 11.2 mn:A 0.6 0.4 B 0.1 0.2 gn: 14 31 2012-Feb-06 01:35:54 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-06 01:35:54 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Feb-06 01:35:54 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-06 01:35:54 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-06 01:35:54 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-06 01:35:54 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-06 01:35:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:35:54 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-06 01:35:54 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-06 01:35:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 01:35:54 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-06 01:35:54 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-06 01:35:54 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-06 01:35:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:35:54 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-06 01:35:54 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-06 01:35:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 01:35:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 01:35:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 01:35:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 01:35:54 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-06 01:35:54 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-06 01:35:54 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-06 01:35:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-06 01:35:54 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 01:35:54 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 01:35:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 01:35:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:35:55 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 01:35:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 01:35:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:35:55 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 01:35:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:35:55 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 01:35:55 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:35:55 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:35:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 01:35:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:35:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:35:55 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:35:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-06 01:35:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 01:35:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 01:35:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 01:35:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 01:35:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-06 01:35:55 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-06 01:35:55 LOG5 log_alfabeam: Parameters: 10.567833333333333 13.445611111111115 10.199869 2012.1014828440693 61.999905 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 0 10.567833333333324 13.445611111111127 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 1 10.565528273146665 13.542410701418888 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 2 10.561124821191417 13.478947051751847 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 3 10.563350423857683 13.381767572563659 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 4 10.570065540977962 13.348159669275972 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 5 10.574578469917901 13.413199992148394 2012-Feb-06 01:35:55 LOG4 log_alfabeam: ALFABEAM 6 10.572266598629179 13.510270523859951 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_055 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: patternid=203700052 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: scanid=203700053 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456289287.0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306289287.0 2012-Feb-06 01:35:55 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 01:35:55 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 01:35:55 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGESLEO_p1_055:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203700052:scanid=203700053:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456289287.0:topobfreqhz=1306289287.0:filetype=1 2012-Feb-06 01:35:55 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 01:35:55 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 01:35:55 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 01:35:55 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 01:35:55 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0002.fits 2012-Feb-06 01:35:55 LOG4 from_mock: From MOCK: starok 2012-Feb-06 01:35:55 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 01:35:55 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Feb-06 01:35:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 01:35:55 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700053 2012-Feb-06 01:35:56 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 01:35:56 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Feb-06 01:35:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120206.a2048.0002.fits} 2012-Feb-06 01:35:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 01:35:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-06 01:35:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20157.00 2012-Feb-06 01:35:56 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 01:35:56 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 01:35:59 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 01:35:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 01:35:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:35:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:36:02.00 2012-Feb-06 01:36:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328506562.00 Mon Feb 6 01:36:02 2012 2012-Feb-06 01:36:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.289287 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.425 (still bad) 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 01:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 01:36:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 01:36:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 01:36:08 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 01:36:08 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 01:36:08 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 01:36:08 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 01:36:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 01:36:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 01:36:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 01:36:08 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 01:36:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 01:36:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 01:36:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 01:36:08 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-06 01:36:08 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 01:36:08 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-06 01:36:08 LOG5 log_alfabeam: Parameters: 10.567833333333333 13.445611111111115 10.203211 2012.1014832243263 61.999905 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 0 10.567833333333333 13.445611111111122 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 1 10.565556669041113 13.542552848677099 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 2 10.561134802050267 13.479370017720564 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 3 10.563331520625603 13.382051505772486 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 4 10.570036627035345 13.348018952635993 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 5 10.574568941886241 13.412779430708897 2012-Feb-06 01:36:08 LOG4 log_alfabeam: ALFABEAM 6 10.572285494287904 13.509993792946732 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_055 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: patternid=203700052 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: scanid=203700054 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456289287.0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306289287.0 2012-Feb-06 01:36:08 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 01:36:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 01:36:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGESLEO_p1_055:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203700052:scanid=203700054:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456289287.0:topobfreqhz=1306289287.0:filetype=1 2012-Feb-06 01:36:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 01:36:08 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 01:36:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 01:36:08 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 01:36:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 01:36:08 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 01:36:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 01:36:08 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG4 from_mock: From MOCK: starok 2012-Feb-06 01:36:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 01:36:08 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 01:36:08 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700054 2012-Feb-06 01:36:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 01:36:08 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Feb-06 01:36:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.565 (still bad) 2012-Feb-06 01:36:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-06 01:36:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20169.00 2012-Feb-06 01:36:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 01:36:09 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 01:36:11 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 01:36:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 01:36:11 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:11 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 01:36:14 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:36:14.01 2012-Feb-06 01:36:14 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328506574.01 Mon Feb 6 01:36:14 2012 2012-Feb-06 01:36:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.289287 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 01:36:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 01:36:14 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-06 01:36:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.532 (still bad) 2012-Feb-06 01:36:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 01:36:20 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 01:36:20 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 01:36:20 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 01:36:20 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 01:36:20 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-06 01:36:20 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-06 01:36:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:36:20 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-06 01:36:20 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-06 01:36:20 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 311.12 and ZA = 7.44 2012-Feb-06 01:36:20 LOG3 track_source: Calling 'track_source AGESLEO_p1_055 311.12 7.4357896758 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:36:20 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:36:20 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_055} INFO {Slewing to source 'AGESLEO_p1_055' ...} 2012-Feb-06 01:36:20 INFO1 track_source: Starting to track AGESLEO_p1_055 2012-Feb-06 01:36:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_055" 2012-Feb-06 01:36:20 LOG3 vw_send: To DATATAKING: set ra 311.12 2012-Feb-06 01:36:20 LOG3 vw_send: To DATATAKING: set dec 7.4357896758 2012-Feb-06 01:36:20 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:36:20 LOG3 vw_send: To DATATAKING: pnt tr 311.12 7.4357896758 -CF 2012-Feb-06 01:36:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:36:20 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:36:20 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:36:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:36:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:36:20 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 LOG1 fixed_driftmap: Parameters: HA = -00:23:00.4 Start = 10:12:40.6 LST = 10:12:23.6 diff = 17.0 secs 2012-Feb-06 01:36:20 INFO2 fixed_driftmap: Waiting 15 seconds for RA 10:35:41 2012-Feb-06 01:36:20 INFO2 lstwait: Waiting for 15 secs from LST 10:12:24 to LST 10:12:39 ... 2012-Feb-06 01:36:20 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.956262256067118 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 01:36:20 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-06 01:36:20 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_055" 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: set ra 311.12 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: set dec 7.4357896758 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: vw% 311.12 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: vw% 7.4357896758 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: pnt tr 311.12 7.4357896758 -CF 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:36:20 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-06 01:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-06 01:36:35 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-06 01:36:35 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Feb-06 01:36:35 LOG4 lstwait: Finished waiting 1.04 seconds late 2012-Feb-06 01:36:35 INFO3 lstwait: Finished waiting 2012-Feb-06 01:36:35 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:36:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-06 01:36:35 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 01:36:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-06 01:36:35 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-06 01:36:35 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 01:36:35 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Feb-06 01:36:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-06 01:36:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_055 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: patternid=203700055 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: scanid=203700055 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456289287.0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306289287.0 2012-Feb-06 01:36:35 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 01:36:35 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 01:36:35 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGESLEO_p1_055:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203700055:scanid=203700055:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456289287.0:topobfreqhz=1306289287.0:filetype=1 2012-Feb-06 01:36:35 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 01:36:35 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Feb-06 01:36:35 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 01:36:35 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 01:36:35 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Feb-06 01:36:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 01:36:35 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 01:36:35 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-06 01:36:35 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 01:36:35 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Feb-06 01:36:35 LOG4 from_mock: From MOCK: starok 2012-Feb-06 01:36:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 01:36:35 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Feb-06 01:36:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 01:36:35 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203700055 2012-Feb-06 01:36:36 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 01:36:36 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Feb-06 01:36:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 01:36:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 01:36:36 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 01:36:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-06 01:36:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20197.00 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.289287 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 01:36:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.289287 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 01:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-06 01:36:38 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 01:36:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2012-Feb-06 01:36:38 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:38 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 01:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-06 01:36:41 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:36:41.01 2012-Feb-06 01:36:41 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328506601.01 Mon Feb 6 01:36:41 2012 2012-Feb-06 01:36:41 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 01:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:36:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:36:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.018 1.044 0.901 2012-Feb-06 01:36:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.104 0.951 1.009 2012-Feb-06 01:36:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.100 1.056 1.012 2012-Feb-06 01:36:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.025 1.063 0.025 2012-Feb-06 01:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Feb-06 01:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 01:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-06 01:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-06 01:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 01:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-06 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2012-Feb-06 01:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-06 01:37:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 01:37:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 1.029 1.044 0.901 2012-Feb-06 01:37:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.103 0.948 1.008 2012-Feb-06 01:37:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.766 1.104 1.056 1.013 2012-Feb-06 01:37:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.022 1.063 0.022 2012-Feb-06 01:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2012-Feb-06 01:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 01:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 01:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 01:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-06 01:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2012-Feb-06 01:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 01:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-06 01:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 01:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 01:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Feb-06 01:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-06 01:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-06 01:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-06 01:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-06 01:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-06 01:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-06 01:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-06 01:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-06 01:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 01:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:38:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:38:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.027 1.043 0.898 2012-Feb-06 01:38:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.103 0.950 1.009 2012-Feb-06 01:38:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.098 1.056 1.012 2012-Feb-06 01:38:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.025 1.064 0.025 2012-Feb-06 01:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2012-Feb-06 01:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-06 01:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-06 01:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-06 01:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-06 01:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-06 01:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Feb-06 01:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Feb-06 01:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Feb-06 01:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Feb-06 01:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Feb-06 01:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Feb-06 01:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Feb-06 01:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:39:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:39:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.029 1.047 0.902 2012-Feb-06 01:39:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.101 0.951 1.008 2012-Feb-06 01:39:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.099 1.066 1.017 2012-Feb-06 01:39:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.979 0.026 1.064 0.026 2012-Feb-06 01:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Feb-06 01:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-06 01:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:40:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 01:40:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.028 1.048 0.904 2012-Feb-06 01:40:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.104 0.954 1.011 2012-Feb-06 01:40:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.099 1.058 1.012 2012-Feb-06 01:40:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.024 1.065 0.024 2012-Feb-06 01:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 01:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 01:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 01:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-06 01:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 01:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 01:41:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:41:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.020 1.047 0.903 2012-Feb-06 01:41:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.106 0.952 1.007 2012-Feb-06 01:41:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.766 1.098 1.065 1.020 2012-Feb-06 01:41:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.025 1.062 0.025 2012-Feb-06 01:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:43:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:43:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.037 1.045 0.900 2012-Feb-06 01:43:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.104 0.953 1.010 2012-Feb-06 01:43:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.098 1.057 1.011 2012-Feb-06 01:43:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.026 1.063 0.026 2012-Feb-06 01:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-06 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:43:41 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:43:41.298 (seconds: 6221.298)!} 2012-Feb-06 01:43:41 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:43:41.298 (seconds: 6221.298)! 2012-Feb-06 01:43:42 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 6220.0 to 6221.0! 2012-Feb-06 01:43:43 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (6220.0 - 6222.0)! 2012-Feb-06 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Feb-06 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-06 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-06 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 01:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:44:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 01:44:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.028 1.046 0.901 2012-Feb-06 01:44:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.104 0.954 1.009 2012-Feb-06 01:44:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.766 1.099 1.057 1.011 2012-Feb-06 01:44:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.024 1.065 0.024 2012-Feb-06 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 01:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-06 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-06 01:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-06 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-06 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-06 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-06 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-06 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-06 01:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-06 01:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-06 01:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-06 01:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2012-Feb-06 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-06 01:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:45:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 01:45:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.027 1.047 0.901 2012-Feb-06 01:45:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.104 0.954 1.008 2012-Feb-06 01:45:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.100 1.062 1.013 2012-Feb-06 01:45:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.024 1.066 0.024 2012-Feb-06 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Feb-06 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Feb-06 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Feb-06 01:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:46:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:46:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.019 1.043 0.900 2012-Feb-06 01:46:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.072 1.099 0.952 1.006 2012-Feb-06 01:46:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.766 1.095 1.057 1.009 2012-Feb-06 01:46:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.025 1.064 0.025 2012-Feb-06 01:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-06 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2012-Feb-06 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2012-Feb-06 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.100 (still bad) 2012-Feb-06 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2012-Feb-06 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-06 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-06 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-06 01:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-06 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-06 01:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-06 01:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-06 01:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-06 01:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2012-Feb-06 01:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-06 01:47:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 01:47:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.021 1.043 0.900 2012-Feb-06 01:47:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.099 0.952 1.006 2012-Feb-06 01:47:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.095 1.054 1.010 2012-Feb-06 01:47:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.978 0.022 1.063 0.022 2012-Feb-06 01:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2012-Feb-06 01:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-06 01:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-06 01:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2012-Feb-06 01:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-06 01:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-06 01:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-06 01:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2012-Feb-06 01:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Feb-06 01:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Feb-06 01:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.096 (still bad) 2012-Feb-06 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Feb-06 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Feb-06 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Feb-06 01:48:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:48:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.024 1.045 0.901 2012-Feb-06 01:48:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.099 0.950 1.007 2012-Feb-06 01:48:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.098 1.055 1.011 2012-Feb-06 01:48:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.025 1.069 0.025 2012-Feb-06 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2012-Feb-06 01:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2012-Feb-06 01:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Feb-06 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Feb-06 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Feb-06 01:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Feb-06 01:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Feb-06 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-06 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-06 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 01:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 01:49:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:49:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.031 1.049 0.904 2012-Feb-06 01:49:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.110 0.957 1.014 2012-Feb-06 01:49:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.103 1.062 1.017 2012-Feb-06 01:49:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.025 1.070 0.025 2012-Feb-06 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Feb-06 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 01:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-06 01:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:50:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:50:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.026 1.042 0.900 2012-Feb-06 01:50:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.104 0.953 1.010 2012-Feb-06 01:50:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.098 1.064 1.015 2012-Feb-06 01:50:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.025 1.066 0.025 2012-Feb-06 01:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:51:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:51:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.024 1.057 0.909 2012-Feb-06 01:51:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.103 0.960 1.015 2012-Feb-06 01:51:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 1.098 1.060 1.015 2012-Feb-06 01:51:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.025 1.070 0.025 2012-Feb-06 01:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 01:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-06 01:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Feb-06 01:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Feb-06 01:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-06 01:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-06 01:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-06 01:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 01:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 01:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 01:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Feb-06 01:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2012-Feb-06 01:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 01:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 01:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 01:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 01:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-06 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 01:52:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 01:52:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.022 1.040 0.899 2012-Feb-06 01:52:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.074 1.107 0.953 1.007 2012-Feb-06 01:52:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 1.101 1.056 1.012 2012-Feb-06 01:52:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.024 1.066 0.025 2012-Feb-06 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-06 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-06 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Feb-06 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-06 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-06 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.103 (still bad) 2012-Feb-06 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 01:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:53:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:53:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.022 1.045 0.899 2012-Feb-06 01:53:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.102 0.955 1.010 2012-Feb-06 01:53:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.099 1.057 1.013 2012-Feb-06 01:53:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.025 1.067 0.025 2012-Feb-06 01:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Feb-06 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-06 01:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:54:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 01:54:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.030 1.042 0.901 2012-Feb-06 01:54:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.101 0.953 1.009 2012-Feb-06 01:54:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.096 1.056 1.011 2012-Feb-06 01:54:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.025 1.067 0.025 2012-Feb-06 01:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Feb-06 01:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-06 01:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.103 (still bad) 2012-Feb-06 01:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-06 01:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-06 01:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2012-Feb-06 01:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2012-Feb-06 01:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2012-Feb-06 01:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.099 (still bad) 2012-Feb-06 01:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-06 01:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Feb-06 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-06 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:55:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:55:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.026 1.042 0.900 2012-Feb-06 01:55:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.100 0.951 1.007 2012-Feb-06 01:55:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.766 1.098 1.055 1.013 2012-Feb-06 01:55:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.980 0.026 1.065 0.026 2012-Feb-06 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Feb-06 01:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-06 01:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-06 01:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-06 01:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Feb-06 01:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Feb-06 01:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Feb-06 01:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Feb-06 01:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Feb-06 01:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Feb-06 01:56:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-06 01:56:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.028 1.046 0.902 2012-Feb-06 01:56:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.098 0.952 1.006 2012-Feb-06 01:56:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.099 1.062 1.017 2012-Feb-06 01:56:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.026 1.070 0.026 2012-Feb-06 01:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Feb-06 01:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Feb-06 01:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.101 (still bad) 2012-Feb-06 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Feb-06 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-06 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Feb-06 01:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 01:56:42 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 01:56:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 01:56:42 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Feb-06 01:56:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 01:56:42 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Feb-06 01:56:42 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-06 01:56:42 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-06 01:56:42 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-06 01:56:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 01:56:42 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-06 01:56:42 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-06 01:56:42 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2012-Feb-06 01:56:42 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES1367_p2_017) < 103739 THEN' 2012-Feb-06 01:56:43 LOG3 is_if_valid: Current source data: up 615.7 14.8 UP - - 144 3.1 2012-Feb-06 01:56:43 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_017) < 103739 2012-Feb-06 01:56:43 INFO5 is_if_valid: Condition parsed as: 10.598594666666665 < 10.627500000000001 2012-Feb-06 01:56:43 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=254.99 alfaangle=-59.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_017 ra=113400.00 dec=212600.00' 2012-Feb-06 01:56:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-06 01:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Feb-06 01:56:44 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 01:56:44 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 254.99 -59.1 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_017 113400.00 212600.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:56:44 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-06 01:56:44 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-06 01:56:44 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESLEO_p1_055' 2012-Feb-06 01:56:44 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-06 01:56:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_017} 2012-Feb-06 01:56:44 INFO3 fixed_driftmap: Sending telescope to Az = 254.99 and ZA = 13.74 2012-Feb-06 01:56:44 LOG3 track_source: Calling 'track_source AGES1367_p2_017 254.99 13.7376505612 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 01:56:44 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 01:56:44 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-06 01:56:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_017} INFO {Slewing to source 'AGES1367_p2_017' ...} 2012-Feb-06 01:56:44 INFO1 track_source: Starting to track AGES1367_p2_017 2012-Feb-06 01:56:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_017" 2012-Feb-06 01:56:44 LOG3 vw_send: To DATATAKING: set ra 254.99 2012-Feb-06 01:56:44 LOG3 vw_send: To DATATAKING: set dec 13.7376505612 2012-Feb-06 01:56:44 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 01:56:44 LOG3 vw_send: To DATATAKING: pnt tr 254.99 13.7376505612 -CF 2012-Feb-06 01:56:44 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:56:44 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 01:56:44 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-06 01:56:44 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 01:56:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:56:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 01:56:44 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-06 01:56:44 START begin_task: Starting task 'rotate ALFA to -59.1 degrees' 2012-Feb-06 01:56:44 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-06 01:56:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -59.1 degrees ...} 2012-Feb-06 01:56:44 INFO2 rotate_alfa: ALFA commanded to -59.1 degrees 2012-Feb-06 01:56:44 LOG3 sock_errsend: To ALFAMOTOR: POSITION -59.1 REPLY 2012-Feb-06 01:56:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 01:56:44 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 01:56:44 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_017" 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: set ra 254.99 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: set dec 13.7376505612 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: vw% 254.99 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: vw% 13.7376505612 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: pnt tr 254.99 13.7376505612 -CF 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 01:56:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:57:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 01:57:52 INFO3 alfa_motor: ALFA rotator in-position -59.10 degrees 2012-Feb-06 01:57:52 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 01:57:52 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Feb-06 01:57:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:57:52 STOP finish_task: Finishing task 'rotate ALFA to -59.1 degrees' 2012-Feb-06 01:57:52 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-06 01:57:52 INFO2 finish_task: DONE finished configuration: rotating ALFA to -59.1 degrees 2012-Feb-06 01:57:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:57:52 STOP end_task: Finishing task 'rotate ALFA to -59.1 degrees' with status 'OK' 2012-Feb-06 01:57:52 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-06 01:57:52 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 01:57:52 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-06 01:57:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 01:57:52 LOG3 waittrk: Start waittrk 5 2012-Feb-06 01:57:52 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 01:57:52 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Feb-06 01:57:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 01:57:57 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Feb-06 01:57:57 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 01:57:57 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Feb-06 01:59:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 01:59:27 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Feb-06 01:59:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 01:59:27 INFO2 waittrk: Now tracking AGES1367_p2_017 2012-Feb-06 01:59:27 LOG4 waittrk: Current telescope position: Az = 614.54 ZA = 13.74 2012-Feb-06 01:59:27 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 01:59:27 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-06 01:59:27 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 01:59:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 01:59:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 01:59:27 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-06 01:59:27 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 01:59:27 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Feb-06 01:59:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 01:59:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 01:59:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:59:27 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 01:59:27 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Feb-06 01:59:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 01:59:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 01:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:59:28 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 01:59:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 01:59:28 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Feb-06 01:59:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 01:59:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:59:28 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 01:59:28 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:59:28 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Feb-06 01:59:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 01:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:59:29 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Feb-06 01:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:59:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 01:59:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 01:59:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:59:29 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 01:59:29 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Feb-06 01:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 01:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 01:59:29 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Feb-06 01:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 01:59:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 01:59:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 01:59:29 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Feb-06 01:59:29 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-06 01:59:29 INFO2 astwait: Waiting for 60 seconds from 05:59:29 to 06:00:29 UTC ... 2012-Feb-06 01:59:29 LOG4 send_obs_status: To obs_status: <1> TASKTIME 60 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 01:59:29 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-06 01:59:29 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-06 02:00:29 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 INFO3 astwait: Finished waiting 2012-Feb-06 02:00:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:00:29 LOG5 dopset_later: Calling 'dopset_later 61.35307775186277' 2012-Feb-06 02:00:29 INFO3 dopset_later: Setting Doppler correction for 02:01:29 (61.4 seconds from now) 2012-Feb-06 02:00:29 LOG5 antvel: Calling 'antvel 254.990000 13.737651 F Heliocentric 61.35307775186277' 2012-Feb-06 02:00:29 LOG2 antvel: Transforming current Az = 254.99 ZA = 13.74 to apparent RA = 11:34:39.9 Dec = +21:21:41.4 2012-Feb-06 02:00:29 LOG2 antvel: Parameters to Doppler: Heliocentric 21689 2012 37 0.0 2012-Feb-06 02:00:29 INFO5 antvel: Computed antenna velocity: -14.17477 km/s 2012-Feb-06 02:00:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.174769745000001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-06 02:00:29 INFO4 dopset_gen: New sky frequencies: 1381.308740 1381.308740 1381.308740 1381.308740 1381.308740 1381.308740 1381.308740 1381.308740 1381.308740 2012-Feb-06 02:00:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.308740 sky0=1381.308740 sky1=1381.308740 sky2=1381.308740 sky3=1381.308740 sky4=1381.308740 sky5=1381.308740 sky6=1381.308740 sky7=1381.308740 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 02:00:29 LOG2 dopset_gen: Result from 'sky2syn': 1631.308740 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631308740.0} 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 02:00:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-06 02:00:29 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-06 02:00:29 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.6 Dec = +21:25:42.3 2012-Feb-06 02:00:29 LOG3 track_source: Calling 'track_source AGES1367_p2_017 113303.6 212542.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:00:29 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:00:29 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_017} INFO {Slewing to source 'AGES1367_p2_017' ...} 2012-Feb-06 02:00:29 INFO1 track_source: Starting to track AGES1367_p2_017 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_017" 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: set ra 113303.6 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: set dec 212542.3 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: pnt tr 113303.6 212542.3 -CJ 2012-Feb-06 02:00:29 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:00:29 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:00:29 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:00:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:00:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:00:29 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 02:00:29 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 02:00:29 LOG3 waittrk: Start waittrk 5 2012-Feb-06 02:00:29 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 02:00:29 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631308740.0} 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_017" 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: set ra 113303.6 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: set dec 212542.3 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 113303.6 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: vw% 212542.3 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.6 212542.3 -CJ 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:00:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:00:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 02:00:34 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Feb-06 02:00:34 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 02:00:34 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-06 02:00:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 02:00:36 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-06 02:00:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:00:36 INFO2 waittrk: Now tracking AGES1367_p2_017 2012-Feb-06 02:00:36 LOG4 waittrk: Current telescope position: Az = 614.55 ZA = 13.73 2012-Feb-06 02:00:36 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 02:00:36 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-06 02:00:36 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 02:00:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:00:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 02:00:36 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-06 02:00:36 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-06 02:00:36 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-06 02:00:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-06 02:00:36 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-06 02:00:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 02:00:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 02:00:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:00:36 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 02:00:36 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-06 02:00:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 02:00:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:00:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:00:39 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:00:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 02:00:39 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-06 02:00:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 02:00:39 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 02:00:39 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-06 02:00:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 02:00:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:00:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:00:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:00:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:00:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 02:00:39 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-06 02:00:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 02:00:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:00:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Feb-06 02:00:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2012-Feb-06 02:00:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-06 02:00:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-06 02:00:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 02:00:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 02:00:40 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-06 02:00:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.073 1.039 ALFA beam 1: 0.869 0.905 2012-Feb-06 02:00:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.107 1.090 ALFA beam 3: 0.973 1.053 2012-Feb-06 02:00:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.776 0.916 ALFA beam 5: 0.923 1.074 2012-Feb-06 02:00:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.101 0.014 ALFA beam 7: 0.957 0.014 2012-Feb-06 02:00:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 02:00:40 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-06 02:00:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 02:00:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:00:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 02:00:40 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-06 02:00:40 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-06 02:00:40 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-06 02:00:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 02:00:40 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-06 02:00:40 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-06 02:00:40 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-06 02:00:40 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-06 02:00:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 02:00:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.039 0.869 0.905 2012-Feb-06 02:00:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.090 0.973 1.053 2012-Feb-06 02:00:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 0.916 0.923 1.074 2012-Feb-06 02:00:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.014 0.957 0.014 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.4 B 29.8 29.9 mn:A 0.3 0.1 B -0.1 -0.2 gn: 11 11 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.0 30.6 B 27.9 29.5 mn:A 0.1 -0.4 B -0.5 0.2 gn: 12 11 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.2 B 32.7 28.3 mn:A 0.2 0.6 B 0.2 -0.0 gn: 7 11 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.8 27.5 B 31.2 31.2 mn:A -0.5 -0.4 B 0.6 0.6 gn: 8 10 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.7 30.7 B 29.7 31.1 mn:A 0.1 -0.3 B 0.4 0.2 gn: 11 12 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.1 29.4 B 30.7 28.5 mn:A 0.2 -0.3 B 0.1 0.2 gn: 11 12 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 31.1 B 30.1 26.9 mn:A 0.4 -0.3 B 0.1 -0.2 gn: 13 12 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.3 28.6 B 28.9 30.1 mn:A -0.2 0.5 B 0.3 0.3 gn: 12 12 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.3 28.5 B 28.9 29.0 mn:A -0.3 -0.2 B -0.5 0.1 gn: 13 11 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.4 28.4 B 31.8 30.6 mn:A 0.1 0.1 B -0.2 0.3 gn: 16 13 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 27.8 B 30.2 30.2 mn:A 0.8 0.7 B 0.1 0.6 gn: 12 11 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.2 28.9 B 30.6 30.3 mn:A -0.2 0.3 B -0.1 0.4 gn: 12 11 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.7 30.0 B 14.0 14.5 mn:A -0.4 0.4 B 0.5 -0.2 gn: 13 31 2012-Feb-06 02:00:47 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.0 27.2 B 11.1 10.8 mn:A 0.6 0.3 B 0.1 0.2 gn: 13 31 2012-Feb-06 02:00:47 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-06 02:00:47 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-06 02:00:47 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-06 02:00:47 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-06 02:00:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:00:47 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-06 02:00:47 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 02:00:47 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-06 02:00:47 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-06 02:00:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:00:47 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-06 02:00:47 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 02:00:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 02:00:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 02:00:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 02:00:47 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-06 02:00:47 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-06 02:00:47 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-06 02:00:47 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 02:00:47 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 02:00:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 02:00:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:00:47 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 02:00:47 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 02:00:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 02:00:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:00:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:00:47 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:00:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 02:00:47 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 02:00:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:00:47 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 02:00:47 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:00:47 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:00:47 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:00:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:00:47 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Feb-06 02:00:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:00:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 02:00:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:00:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:00:47 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:00:47 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:00:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:00:48 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:00:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:00:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 02:00:48 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-06 02:00:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 02:00:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 02:00:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 02:00:48 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 02:00:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 02:00:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 02:00:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 02:00:48 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-06 02:00:48 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:00:48 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-06 02:00:48 LOG5 log_alfabeam: Parameters: 11.551000000000002 21.428416666666664 10.615448 2012.1015301226962 -59.100063 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 0 11.551000000000000 21.428416666666674 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 1 11.552021451744455 21.338133009459817 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 2 11.558044334270265 21.398111544049680 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 3 11.556997832498784 21.488958846606216 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 4 11.549934753326577 21.518614178521737 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 5 11.543949467001639 21.458020881543025 2012-Feb-06 02:00:48 LOG4 log_alfabeam: ALFABEAM 6 11.544989583581547 21.368386111390294 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_017 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: patternid=203700055 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: scanid=203700056 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308740.0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308740.0 2012-Feb-06 02:00:48 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:00:48 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:00:48 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_017:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203700055:scanid=203700056:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308740.0:topobfreqhz=1306308740.0:filetype=1 2012-Feb-06 02:00:48 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:00:48 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:00:48 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:00:48 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:00:48 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:00:48 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 02:00:48 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:00:48 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0003.fits 2012-Feb-06 02:00:48 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:00:48 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:00:48 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Feb-06 02:00:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:00:48 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700056 2012-Feb-06 02:00:49 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:00:49 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2012-Feb-06 02:00:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120206.a2048.0003.fits} 2012-Feb-06 02:00:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:00:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:00:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:00:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-06 02:00:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21650.00 2012-Feb-06 02:00:51 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:00:51 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 02:00:51 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:00:54 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:00:54.01 2012-Feb-06 02:00:54 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328508054.01 Mon Feb 6 02:00:54 2012 2012-Feb-06 02:00:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308740 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.481 (still bad) 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:00:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:00:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:01:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:01:00 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:01:00 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:01:00 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:01:00 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 02:01:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 02:01:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 02:01:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 02:01:00 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 02:01:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 02:01:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 02:01:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 02:01:00 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-06 02:01:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:01:00 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-06 02:01:00 LOG5 log_alfabeam: Parameters: 11.551000000000002 21.428416666666664 10.618790 2012.1015305029534 -59.100063 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 0 11.550999999999998 21.428416666666674 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 1 11.552027289138696 21.338145952032125 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 2 11.558046312788981 21.398200439208107 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 3 11.556993831909470 21.489036424380831 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 4 11.549928765554004 21.518600377960738 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 5 11.543947526522841 21.457929685142759 2012-Feb-06 02:01:00 LOG4 log_alfabeam: ALFABEAM 6 11.544993488975935 21.368310332108159 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_017 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: patternid=203700055 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: scanid=203700057 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308740.0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308740.0 2012-Feb-06 02:01:00 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:01:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:01:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_017:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203700055:scanid=203700057:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308740.0:topobfreqhz=1306308740.0:filetype=1 2012-Feb-06 02:01:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:01:00 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:01:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:01:00 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:01:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:01:00 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 02:01:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:01:00 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:01:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:01:00 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:01:00 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700057 2012-Feb-06 02:01:00 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:01:00 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-06 02:01:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:01:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-06 02:01:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21661.00 2012-Feb-06 02:01:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:01:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.526 (still bad) 2012-Feb-06 02:01:03 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:01:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 02:01:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:01:06 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:01:06.01 2012-Feb-06 02:01:06 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328508066.01 Mon Feb 6 02:01:06 2012 2012-Feb-06 02:01:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308740 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:01:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:01:06 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-06 02:01:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:01:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:01:12 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:01:12 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:01:12 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:01:12 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 02:01:12 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-06 02:01:12 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-06 02:01:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:01:12 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-06 02:01:12 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-06 02:01:12 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 254.99 and ZA = 13.74 2012-Feb-06 02:01:12 LOG3 track_source: Calling 'track_source AGES1367_p2_017 254.99 13.7376505612 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:01:12 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:01:12 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_017} INFO {Slewing to source 'AGES1367_p2_017' ...} 2012-Feb-06 02:01:12 INFO1 track_source: Starting to track AGES1367_p2_017 2012-Feb-06 02:01:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_017" 2012-Feb-06 02:01:12 LOG3 vw_send: To DATATAKING: set ra 254.99 2012-Feb-06 02:01:12 LOG3 vw_send: To DATATAKING: set dec 13.7376505612 2012-Feb-06 02:01:12 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:01:12 LOG3 vw_send: To DATATAKING: pnt tr 254.99 13.7376505612 -CF 2012-Feb-06 02:01:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:01:12 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:01:12 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:01:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:01:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:01:12 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 LOG1 fixed_driftmap: Parameters: HA = -00:57:02.0 Start = 10:37:38.1 LST = 10:37:19.7 diff = 18.4 secs 2012-Feb-06 02:01:12 INFO2 fixed_driftmap: Waiting 16.4 seconds for RA 11:34:40 2012-Feb-06 02:01:12 INFO2 lstwait: Waiting for 16.4 secs from LST 10:37:20 to LST 10:37:36 ... 2012-Feb-06 02:01:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.359065754742801 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 02:01:12 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-06 02:01:12 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_017" 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: set ra 254.99 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: set dec 13.7376505612 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: vw% 254.99 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: vw% 13.7376505612 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: pnt tr 254.99 13.7376505612 -CF 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:01:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:01:28 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-06 02:01:28 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Feb-06 02:01:28 LOG4 lstwait: Finished waiting 0.64 seconds late 2012-Feb-06 02:01:28 INFO3 lstwait: Finished waiting 2012-Feb-06 02:01:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:01:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-06 02:01:28 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 02:01:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-06 02:01:28 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-06 02:01:28 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:01:28 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2012-Feb-06 02:01:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-06 02:01:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_017 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: patternid=203700058 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: scanid=203700058 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308740.0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308740.0 2012-Feb-06 02:01:28 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:01:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:01:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_017:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203700058:scanid=203700058:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308740.0:topobfreqhz=1306308740.0:filetype=1 2012-Feb-06 02:01:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:01:28 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Feb-06 02:01:29 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:01:29 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:01:29 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Feb-06 02:01:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:01:29 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:01:29 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-06 02:01:29 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:01:29 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Feb-06 02:01:29 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:01:29 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:01:29 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Feb-06 02:01:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:01:29 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203700058 2012-Feb-06 02:01:29 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:01:29 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-06 02:01:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:01:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:01:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:01:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-06 02:01:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21690.00 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308740 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:01:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308740 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:01:31 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2012-Feb-06 02:01:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:01:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2012-Feb-06 02:01:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-06 02:01:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:01:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:01:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:01:32 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:01:35 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:01:35.01 2012-Feb-06 02:01:35 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328508095.01 Mon Feb 6 02:01:35 2012 2012-Feb-06 02:01:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-06 02:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:01:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 02:01:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.049 0.874 0.906 2012-Feb-06 02:01:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.092 0.976 1.054 2012-Feb-06 02:01:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 0.918 0.920 1.073 2012-Feb-06 02:01:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.014 0.958 0.019 2012-Feb-06 02:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2012-Feb-06 02:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-06 02:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2012-Feb-06 02:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2012-Feb-06 02:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2012-Feb-06 02:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-06 02:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2012-Feb-06 02:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-06 02:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2012-Feb-06 02:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2012-Feb-06 02:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-06 02:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2012-Feb-06 02:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-06 02:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-06 02:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2012-Feb-06 02:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2012-Feb-06 02:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2012-Feb-06 02:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2012-Feb-06 02:02:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 02:02:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.043 0.874 0.907 2012-Feb-06 02:02:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.097 0.981 1.059 2012-Feb-06 02:02:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 0.917 0.923 1.073 2012-Feb-06 02:02:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.014 0.960 0.019 2012-Feb-06 02:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2012-Feb-06 02:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2012-Feb-06 02:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2012-Feb-06 02:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-06 02:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 02:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 02:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-06 02:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-06 02:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:03:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:03:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.048 0.880 0.910 2012-Feb-06 02:03:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.108 1.098 0.982 1.060 2012-Feb-06 02:03:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.922 0.932 1.079 2012-Feb-06 02:03:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.019 0.961 0.020 2012-Feb-06 02:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 02:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-06 02:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-06 02:04:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:04:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.051 0.879 0.906 2012-Feb-06 02:04:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.093 0.980 1.056 2012-Feb-06 02:04:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 0.918 0.927 1.076 2012-Feb-06 02:04:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.020 0.963 0.021 2012-Feb-06 02:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-06 02:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-06 02:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-06 02:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-06 02:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-06 02:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-06 02:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-06 02:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:05:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:05:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.044 0.876 0.906 2012-Feb-06 02:05:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 1.095 0.980 1.056 2012-Feb-06 02:05:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.916 0.922 1.074 2012-Feb-06 02:05:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.019 0.957 0.019 2012-Feb-06 02:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-06 02:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-06 02:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:06:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:06:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.047 0.881 0.911 2012-Feb-06 02:06:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.115 1.094 0.980 1.055 2012-Feb-06 02:06:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.914 0.922 1.073 2012-Feb-06 02:06:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.019 0.958 0.020 2012-Feb-06 02:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-06 02:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-06 02:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 02:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 02:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 02:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 02:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 02:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 02:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:07:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:07:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.050 0.880 0.906 2012-Feb-06 02:07:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.111 1.094 0.991 1.065 2012-Feb-06 02:07:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 0.919 0.924 1.074 2012-Feb-06 02:07:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.019 0.960 0.020 2012-Feb-06 02:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:08:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:08:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.051 0.881 0.908 2012-Feb-06 02:08:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.112 1.094 0.989 1.064 2012-Feb-06 02:08:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 0.920 0.942 1.091 2012-Feb-06 02:08:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.019 0.962 0.020 2012-Feb-06 02:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-06 02:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-06 02:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-06 02:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-06 02:09:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:09:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.052 0.879 0.907 2012-Feb-06 02:09:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.126 1.106 1.089 1.165 2012-Feb-06 02:09:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 0.918 0.936 1.085 2012-Feb-06 02:09:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.019 0.960 0.020 2012-Feb-06 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.213 (still bad) 2012-Feb-06 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.257 (still bad) 2012-Feb-06 02:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.285 (still bad) 2012-Feb-06 02:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.297 (still bad) 2012-Feb-06 02:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.291 (still bad) 2012-Feb-06 02:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.246 (still bad) 2012-Feb-06 02:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.209 (still bad) 2012-Feb-06 02:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.163 (still bad) 2012-Feb-06 02:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-06 02:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-06 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.154 (still bad) 2012-Feb-06 02:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.182 (still bad) 2012-Feb-06 02:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.214 (still bad) 2012-Feb-06 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.240 (still bad) 2012-Feb-06 02:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.249 (still bad) 2012-Feb-06 02:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.244 (still bad) 2012-Feb-06 02:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.228 (still bad) 2012-Feb-06 02:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.202 (still bad) 2012-Feb-06 02:10:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:10:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.051 0.881 0.906 2012-Feb-06 02:10:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 1.095 0.983 1.061 2012-Feb-06 02:10:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 0.925 1.012 1.167 2012-Feb-06 02:10:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.019 0.960 0.020 2012-Feb-06 02:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-06 02:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:11:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:11:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.047 0.880 0.907 2012-Feb-06 02:11:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 1.096 0.982 1.059 2012-Feb-06 02:11:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 0.926 0.927 1.078 2012-Feb-06 02:11:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.020 0.959 0.021 2012-Feb-06 02:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-06 02:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 02:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-06 02:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 02:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 02:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-06 02:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-06 02:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-06 02:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:12:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:12:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.048 0.884 0.911 2012-Feb-06 02:12:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 1.100 0.983 1.060 2012-Feb-06 02:12:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 0.921 0.932 1.077 2012-Feb-06 02:12:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.020 0.961 0.020 2012-Feb-06 02:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-06 02:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-06 02:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-06 02:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-06 02:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-06 02:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-06 02:14:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:14:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.053 0.885 0.909 2012-Feb-06 02:14:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.126 1.103 0.985 1.063 2012-Feb-06 02:14:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 0.923 0.932 1.082 2012-Feb-06 02:14:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.019 0.968 0.020 2012-Feb-06 02:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-06 02:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-06 02:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-06 02:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-06 02:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-06 02:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-06 02:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:15:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:15:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.055 0.885 0.909 2012-Feb-06 02:15:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.113 1.096 0.987 1.065 2012-Feb-06 02:15:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.923 0.934 1.084 2012-Feb-06 02:15:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.019 0.963 0.019 2012-Feb-06 02:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-06 02:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-06 02:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-06 02:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:16:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:16:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.053 0.885 0.912 2012-Feb-06 02:16:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 1.099 0.985 1.063 2012-Feb-06 02:16:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.924 0.933 1.083 2012-Feb-06 02:16:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.111 0.020 0.964 0.021 2012-Feb-06 02:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-06 02:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-06 02:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-06 02:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-06 02:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-06 02:17:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:17:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.052 0.884 0.909 2012-Feb-06 02:17:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 1.101 0.985 1.064 2012-Feb-06 02:17:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.925 0.933 1.084 2012-Feb-06 02:17:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.020 0.965 0.021 2012-Feb-06 02:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 02:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-06 02:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 02:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 02:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 02:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-06 02:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-06 02:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-06 02:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-06 02:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2012-Feb-06 02:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-06 02:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-06 02:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-06 02:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-06 02:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-06 02:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-06 02:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-06 02:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-06 02:18:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:18:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.055 0.888 0.915 2012-Feb-06 02:18:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.123 1.106 0.987 1.067 2012-Feb-06 02:18:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.925 0.934 1.084 2012-Feb-06 02:18:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.115 0.021 0.970 0.022 2012-Feb-06 02:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-06 02:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-06 02:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-06 02:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-06 02:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-06 02:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-06 02:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-06 02:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-06 02:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-06 02:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-06 02:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-06 02:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-06 02:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-06 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-06 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-06 02:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-06 02:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-06 02:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-06 02:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-06 02:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-06 02:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Feb-06 02:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-06 02:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.150 (still bad) 2012-Feb-06 02:19:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:19:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.059 0.888 0.914 2012-Feb-06 02:19:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.158 1.145 0.990 1.067 2012-Feb-06 02:19:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.928 0.937 1.086 2012-Feb-06 02:19:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.112 0.020 0.966 0.021 2012-Feb-06 02:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.158 (still bad) 2012-Feb-06 02:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.162 (still bad) 2012-Feb-06 02:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.164 (still bad) 2012-Feb-06 02:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.158 (still bad) 2012-Feb-06 02:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-06 02:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Feb-06 02:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-06 02:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-06 02:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 02:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-06 02:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 02:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-06 02:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-06 02:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-06 02:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Feb-06 02:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2012-Feb-06 02:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.152 (still bad) 2012-Feb-06 02:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.157 (still bad) 2012-Feb-06 02:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.153 (still bad) 2012-Feb-06 02:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2012-Feb-06 02:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.147 (still bad) 2012-Feb-06 02:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-06 02:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2012-Feb-06 02:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-06 02:20:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 02:20:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.059 0.886 0.912 2012-Feb-06 02:20:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 1.101 0.989 1.066 2012-Feb-06 02:20:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 0.926 0.935 1.088 2012-Feb-06 02:20:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.022 0.969 0.022 2012-Feb-06 02:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2012-Feb-06 02:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-06 02:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-06 02:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-06 02:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-06 02:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-06 02:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-06 02:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-06 02:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2012-Feb-06 02:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-06 02:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-06 02:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-06 02:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-06 02:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-06 02:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-06 02:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-06 02:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-06 02:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-06 02:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-06 02:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 02:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-06 02:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-06 02:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 02:21:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:21:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.060 0.886 0.914 2012-Feb-06 02:21:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 1.100 0.987 1.066 2012-Feb-06 02:21:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 0.927 0.935 1.087 2012-Feb-06 02:21:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.021 0.967 0.022 2012-Feb-06 02:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-06 02:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-06 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2012-Feb-06 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2012-Feb-06 02:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:21:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:21:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:21:36 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:21:36 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:21:36 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-06 02:21:36 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:21:36 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2012-Feb-06 02:21:36 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-06 02:21:36 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-06 02:21:36 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-06 02:21:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 02:21:36 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-06 02:21:36 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-06 02:21:36 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2012-Feb-06 02:21:36 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES1367_p2_019) < 110109 THEN' 2012-Feb-06 02:21:37 LOG3 is_if_valid: Current source data: up 609.6 9.2 UP - - 119 1.9 2012-Feb-06 02:21:37 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_019) < 110109 2012-Feb-06 02:21:37 INFO5 is_if_valid: Condition parsed as: 10.994730666666666 < 11.019166666666667 2012-Feb-06 02:21:37 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=248.04 alfaangle=-48.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_019 ra=113400.00 dec=212300.00' 2012-Feb-06 02:21:37 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-06 02:21:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 02:21:37 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 248.04 -48.9 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_019 113400.00 212300.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:21:37 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-06 02:21:38 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-06 02:21:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_017' 2012-Feb-06 02:21:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-06 02:21:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_019} 2012-Feb-06 02:21:38 INFO3 fixed_driftmap: Sending telescope to Az = 248.04 and ZA = 8.42 2012-Feb-06 02:21:38 LOG3 track_source: Calling 'track_source AGES1367_p2_019 248.04 8.4154085928 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:21:38 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:21:38 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-06 02:21:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_019} INFO {Slewing to source 'AGES1367_p2_019' ...} 2012-Feb-06 02:21:38 INFO1 track_source: Starting to track AGES1367_p2_019 2012-Feb-06 02:21:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_019" 2012-Feb-06 02:21:38 LOG3 vw_send: To DATATAKING: set ra 248.04 2012-Feb-06 02:21:38 LOG3 vw_send: To DATATAKING: set dec 8.4154085928 2012-Feb-06 02:21:38 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:21:38 LOG3 vw_send: To DATATAKING: pnt tr 248.04 8.4154085928 -CF 2012-Feb-06 02:21:38 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:21:38 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:21:38 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-06 02:21:38 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:21:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:21:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:21:38 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-06 02:21:38 START begin_task: Starting task 'rotate ALFA to -48.9 degrees' 2012-Feb-06 02:21:38 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-06 02:21:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -48.9 degrees ...} 2012-Feb-06 02:21:38 INFO2 rotate_alfa: ALFA commanded to -48.9 degrees 2012-Feb-06 02:21:38 LOG3 sock_errsend: To ALFAMOTOR: POSITION -48.9 REPLY 2012-Feb-06 02:21:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 02:21:38 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 02:21:38 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_019" 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: set ra 248.04 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: set dec 8.4154085928 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: vw% 248.04 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: vw% 8.4154085928 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: pnt tr 248.04 8.4154085928 -CF 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:21:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-06 02:21:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 02:21:45 INFO3 alfa_motor: ALFA rotator in-position -48.90 degrees 2012-Feb-06 02:21:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 02:21:45 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-06 02:21:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:21:45 STOP finish_task: Finishing task 'rotate ALFA to -48.9 degrees' 2012-Feb-06 02:21:45 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-06 02:21:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to -48.9 degrees 2012-Feb-06 02:21:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:21:45 STOP end_task: Finishing task 'rotate ALFA to -48.9 degrees' with status 'OK' 2012-Feb-06 02:21:45 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-06 02:21:45 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 02:21:45 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-06 02:21:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 02:21:45 LOG3 waittrk: Start waittrk 5 2012-Feb-06 02:21:45 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 02:21:45 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Feb-06 02:21:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 02:21:50 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Feb-06 02:21:50 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 02:21:50 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Feb-06 02:23:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 02:23:57 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Feb-06 02:23:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:23:57 INFO2 waittrk: Now tracking AGES1367_p2_019 2012-Feb-06 02:23:57 LOG4 waittrk: Current telescope position: Az = 607.52 ZA = 8.41 2012-Feb-06 02:23:57 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 02:23:57 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-06 02:23:57 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 02:23:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:23:57 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 02:23:57 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-06 02:23:57 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 02:23:57 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Feb-06 02:23:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 02:23:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 02:23:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:23:57 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 02:23:57 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Feb-06 02:23:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 02:23:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:23:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:23:58 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:23:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 02:23:58 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 02:23:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:23:58 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 02:23:58 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:23:58 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:23:58 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:23:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:23:58 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:23:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 02:23:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:23:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:23:58 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:23:58 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:23:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:23:58 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:23:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:23:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 02:23:58 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG5 dopset_later: Calling 'dopset_later 58.91094141708885' 2012-Feb-06 02:23:58 INFO3 dopset_later: Setting Doppler correction for 02:24:57 (58.9 seconds from now) 2012-Feb-06 02:23:58 LOG5 antvel: Calling 'antvel 248.040000 8.415409 F Heliocentric 58.91094141708885' 2012-Feb-06 02:23:58 LOG2 antvel: Transforming current Az = 248.04 ZA = 8.42 to apparent RA = 11:34:39.9 Dec = +21:18:41.4 2012-Feb-06 02:23:58 LOG2 antvel: Parameters to Doppler: Heliocentric 23097 2012 37 0.0 2012-Feb-06 02:23:58 INFO5 antvel: Computed antenna velocity: -14.13917 km/s 2012-Feb-06 02:23:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.1391689442 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-06 02:23:58 INFO4 dopset_gen: New sky frequencies: 1381.308575 1381.308575 1381.308575 1381.308575 1381.308575 1381.308575 1381.308575 1381.308575 1381.308575 2012-Feb-06 02:23:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.308575 sky0=1381.308575 sky1=1381.308575 sky2=1381.308575 sky3=1381.308575 sky4=1381.308575 sky5=1381.308575 sky6=1381.308575 sky7=1381.308575 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 02:23:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.308575 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 02:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631308575.0} 2012-Feb-06 02:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 02:23:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-06 02:23:58 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-06 02:23:58 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:06.1 Dec = +21:22:42.3 2012-Feb-06 02:23:58 LOG3 track_source: Calling 'track_source AGES1367_p2_019 113306.1 212242.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:23:58 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:23:58 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-06 02:23:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_019} INFO {Slewing to source 'AGES1367_p2_019' ...} 2012-Feb-06 02:23:58 INFO1 track_source: Starting to track AGES1367_p2_019 2012-Feb-06 02:23:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_019" 2012-Feb-06 02:23:59 LOG3 vw_send: To DATATAKING: set ra 113306.1 2012-Feb-06 02:23:59 LOG3 vw_send: To DATATAKING: set dec 212242.3 2012-Feb-06 02:23:59 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:23:59 LOG3 vw_send: To DATATAKING: pnt tr 113306.1 212242.3 -CJ 2012-Feb-06 02:23:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:23:59 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:23:59 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-06 02:23:59 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:23:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:23:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:23:59 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-06 02:23:59 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 02:23:59 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-06 02:23:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 02:23:59 LOG3 waittrk: Start waittrk 5 2012-Feb-06 02:23:59 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 02:23:59 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631308575.0} 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_019" 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: set ra 113306.1 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: set dec 212242.3 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: vw% 113306.1 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: vw% 212242.3 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: pnt tr 113306.1 212242.3 -CJ 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:04 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 02:24:04 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-06 02:24:04 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 02:24:04 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Feb-06 02:24:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 02:24:06 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Feb-06 02:24:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:24:06 INFO2 waittrk: Now tracking AGES1367_p2_019 2012-Feb-06 02:24:06 LOG4 waittrk: Current telescope position: Az = 607.52 ZA = 8.40 2012-Feb-06 02:24:06 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 02:24:06 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-06 02:24:06 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 02:24:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:24:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 02:24:06 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-06 02:24:06 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-06 02:24:06 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-06 02:24:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-06 02:24:06 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-06 02:24:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 02:24:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 02:24:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:24:06 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 02:24:06 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-06 02:24:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 02:24:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:09 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:24:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 02:24:09 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-06 02:24:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 02:24:09 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 02:24:09 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-06 02:24:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 02:24:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:24:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:24:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:24:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:24:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 02:24:09 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-06 02:24:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 02:24:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2012-Feb-06 02:24:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2012-Feb-06 02:24:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-06 02:24:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-06 02:24:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 02:24:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 02:24:10 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-06 02:24:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.057 1.032 ALFA beam 1: 1.100 1.125 2012-Feb-06 02:24:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.087 1.066 ALFA beam 3: 0.968 1.037 2012-Feb-06 02:24:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.777 1.116 ALFA beam 5: 0.904 1.045 2012-Feb-06 02:24:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.078 0.014 ALFA beam 7: 0.936 0.014 2012-Feb-06 02:24:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 02:24:10 LOG5 finish_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-06 02:24:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 02:24:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:24:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 02:24:10 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-06 02:24:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-06 02:24:10 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-06 02:24:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 02:24:10 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-06 02:24:10 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-06 02:24:10 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-06 02:24:10 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-06 02:24:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 02:24:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.032 1.100 1.125 2012-Feb-06 02:24:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.066 0.968 1.037 2012-Feb-06 02:24:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.116 0.904 1.045 2012-Feb-06 02:24:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.014 0.936 0.014 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.9 27.2 B 29.9 29.9 mn:A 0.0 -0.1 B -0.1 -0.3 gn: 11 11 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.1 29.8 B 27.6 29.3 mn:A 0.1 -0.5 B -0.5 0.1 gn: 12 11 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.9 28.0 B 32.5 28.2 mn:A 0.6 0.6 B 0.2 -0.1 gn: 7 11 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b1s1g0 rms:A 33.0 30.4 B 30.8 30.8 mn:A -0.3 -0.2 B 0.6 0.2 gn: 9 10 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.5 30.6 B 29.5 30.9 mn:A -0.1 -0.4 B 0.4 0.1 gn: 11 12 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.8 29.0 B 30.3 28.2 mn:A 0.2 -0.2 B 0.1 0.3 gn: 11 12 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.2 30.9 B 30.0 26.8 mn:A 0.4 -0.3 B 0.1 -0.2 gn: 13 12 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.0 28.3 B 28.4 29.6 mn:A -0.2 0.4 B 0.2 0.1 gn: 12 12 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.3 28.5 B 28.6 28.7 mn:A -0.3 -0.3 B -0.5 0.0 gn: 13 11 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.3 28.3 B 31.2 30.1 mn:A 0.0 0.0 B -0.2 0.3 gn: 16 13 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.0 30.8 B 29.7 29.7 mn:A 0.7 0.6 B 0.1 0.6 gn: 13 11 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.7 28.5 B 29.9 29.7 mn:A -0.2 0.3 B -0.1 0.3 gn: 12 11 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.4 29.6 B 14.1 14.5 mn:A -0.3 0.2 B 0.4 -0.3 gn: 13 31 2012-Feb-06 02:24:17 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.8 29.7 B 11.1 10.8 mn:A 0.7 0.3 B 0.1 0.2 gn: 14 31 2012-Feb-06 02:24:17 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-06 02:24:17 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-06 02:24:17 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-06 02:24:17 LOG5 finish_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-06 02:24:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:24:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-06 02:24:17 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 02:24:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-06 02:24:17 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-06 02:24:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:24:17 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-06 02:24:17 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 02:24:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 02:24:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 02:24:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 02:24:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-06 02:24:17 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-06 02:24:17 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-06 02:24:17 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 02:24:17 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 02:24:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 02:24:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:24:17 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 02:24:17 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 02:24:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 02:24:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:24:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:17 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:24:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 02:24:17 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 02:24:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:24:17 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 02:24:17 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:24:17 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Feb-06 02:24:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:18 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:24:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:24:18 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:24:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 02:24:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:24:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:24:18 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:24:18 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:24:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:24:18 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:24:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:24:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 02:24:18 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-06 02:24:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 02:24:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 02:24:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 02:24:18 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 02:24:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 02:24:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 02:24:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 02:24:18 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-06 02:24:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:24:18 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-06 02:24:18 LOG5 log_alfabeam: Parameters: 11.551694444444447 21.378416666666663 11.008187 2012.1015748029001 -48.900043 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 0 11.551694444444442 21.378416666666656 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 1 11.552389523711215 21.287021924273493 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 2 11.558544428934932 21.347601641515237 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 3 11.557804620730769 21.439983409122924 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 4 11.550923505220101 21.469908156411112 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 5 11.544839781726978 21.407944104081540 2012-Feb-06 02:24:18 LOG4 log_alfabeam: ALFABEAM 6 11.545565566362608 21.317435794951113 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_019 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: patternid=203700058 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: scanid=203700059 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308575.0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308575.0 2012-Feb-06 02:24:18 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:24:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:24:18 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_019:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203700058:scanid=203700059:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308575.0:topobfreqhz=1306308575.0:filetype=1 2012-Feb-06 02:24:18 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:24:18 LOG5 begin_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:24:18 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:24:18 LOG5 end_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:24:18 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:24:18 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 02:24:18 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:24:18 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0004.fits 2012-Feb-06 02:24:18 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:24:18 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:24:18 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Feb-06 02:24:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:24:18 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700059 2012-Feb-06 02:24:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:24:19 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Feb-06 02:24:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120206.a2048.0004.fits} 2012-Feb-06 02:24:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:24:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:24:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:24:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-06 02:24:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23060.00 2012-Feb-06 02:24:21 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:24:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 02:24:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:24:24.01 2012-Feb-06 02:24:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328509464.01 Mon Feb 6 02:24:24 2012 2012-Feb-06 02:24:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308575 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.536 (still bad) 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:24:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:24:30 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:24:30 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:24:30 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:24:30 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:24:30 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 02:24:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 02:24:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 02:24:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 02:24:30 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 02:24:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 02:24:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 02:24:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 02:24:30 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-06 02:24:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:24:30 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-06 02:24:30 LOG5 log_alfabeam: Parameters: 11.551694444444447 21.378416666666663 11.011529 2012.1015751831571 -48.900043 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 0 11.551694444444445 21.378416666666649 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 1 11.552403447541977 21.287043388758711 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 2 11.558549176417362 21.347805113828944 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 3 11.557795019624594 21.440169342997166 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 4 11.550909146003599 21.469884914222650 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 5 11.544835232223576 21.407733906774215 2012-Feb-06 02:24:30 LOG4 log_alfabeam: ALFABEAM 6 11.545574948012227 21.317252710139197 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_019 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: patternid=203700058 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: scanid=203700060 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308575.0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308575.0 2012-Feb-06 02:24:30 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:24:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:24:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_019:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203700058:scanid=203700060:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308575.0:topobfreqhz=1306308575.0:filetype=1 2012-Feb-06 02:24:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:24:30 LOG5 begin_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:24:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:24:30 LOG5 end_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:24:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:24:30 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 02:24:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:24:30 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:24:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:24:30 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:24:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700060 2012-Feb-06 02:24:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:24:30 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Feb-06 02:24:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:24:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23071.00 2012-Feb-06 02:24:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-06 02:24:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:24:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.580 (still bad) 2012-Feb-06 02:24:33 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:24:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 02:24:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:24:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:24:36.01 2012-Feb-06 02:24:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328509476.01 Mon Feb 6 02:24:36 2012 2012-Feb-06 02:24:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308575 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:24:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:24:36 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-06 02:24:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2012-Feb-06 02:24:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:24:42 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:24:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:24:42 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:24:42 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 02:24:42 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-06 02:24:42 LOG5 finish_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-06 02:24:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:24:42 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-06 02:24:42 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-06 02:24:42 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 248.04 and ZA = 8.42 2012-Feb-06 02:24:42 LOG3 track_source: Calling 'track_source AGES1367_p2_019 248.04 8.4154085928 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:24:42 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:24:42 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_019} INFO {Slewing to source 'AGES1367_p2_019' ...} 2012-Feb-06 02:24:42 INFO1 track_source: Starting to track AGES1367_p2_019 2012-Feb-06 02:24:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_019" 2012-Feb-06 02:24:42 LOG3 vw_send: To DATATAKING: set ra 248.04 2012-Feb-06 02:24:42 LOG3 vw_send: To DATATAKING: set dec 8.4154085928 2012-Feb-06 02:24:42 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:24:42 LOG3 vw_send: To DATATAKING: pnt tr 248.04 8.4154085928 -CF 2012-Feb-06 02:24:42 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:24:42 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:24:42 LOG5 finish_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:24:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:24:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:24:42 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 LOG1 fixed_driftmap: Parameters: HA = -00:33:30.6 Start = 11:01:09.5 LST = 11:00:53.5 diff = 16.0 secs 2012-Feb-06 02:24:42 INFO2 fixed_driftmap: Waiting 14 seconds for RA 11:34:40 2012-Feb-06 02:24:42 INFO2 lstwait: Waiting for 13.9 secs from LST 11:00:54 to LST 11:01:07 ... 2012-Feb-06 02:24:42 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.916929419968879 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 02:24:42 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-06 02:24:42 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_019" 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: set ra 248.04 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: set dec 8.4154085928 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 248.04 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 8.4154085928 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: pnt tr 248.04 8.4154085928 -CF 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:24:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2012-Feb-06 02:24:56 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-06 02:24:56 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-06 02:24:56 LOG4 lstwait: Finished waiting 1.09 seconds late 2012-Feb-06 02:24:56 INFO3 lstwait: Finished waiting 2012-Feb-06 02:24:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:24:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-06 02:24:56 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 02:24:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-06 02:24:56 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-06 02:24:56 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:24:56 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Feb-06 02:24:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-06 02:24:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_019 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: patternid=203700061 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: scanid=203700061 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308575.0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308575.0 2012-Feb-06 02:24:56 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:24:56 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:24:56 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_019:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203700061:scanid=203700061:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308575.0:topobfreqhz=1306308575.0:filetype=1 2012-Feb-06 02:24:56 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:24:56 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2012-Feb-06 02:24:56 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:24:56 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:24:56 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2012-Feb-06 02:24:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:24:56 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:24:56 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-06 02:24:56 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:24:56 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Feb-06 02:24:56 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:24:56 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:24:56 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Feb-06 02:24:56 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:24:56 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203700061 2012-Feb-06 02:24:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:24:57 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Feb-06 02:24:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:24:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:24:57 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:24:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-06 02:24:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23098.00 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308575 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:24:59 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2012-Feb-06 02:24:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308575 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:24:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-06 02:24:59 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:24:59 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.133 (still bad) 2012-Feb-06 02:25:02 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:25:02.01 2012-Feb-06 02:25:02 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328509502.01 Mon Feb 6 02:25:02 2012 2012-Feb-06 02:25:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2012-Feb-06 02:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2012-Feb-06 02:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2012-Feb-06 02:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2012-Feb-06 02:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2012-Feb-06 02:25:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 02:25:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.035 1.107 1.135 2012-Feb-06 02:25:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.069 0.966 1.036 2012-Feb-06 02:25:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.119 0.905 1.049 2012-Feb-06 02:25:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.014 0.936 0.014 2012-Feb-06 02:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2012-Feb-06 02:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2012-Feb-06 02:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.131 (still bad) 2012-Feb-06 02:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2012-Feb-06 02:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2012-Feb-06 02:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.134 (still bad) 2012-Feb-06 02:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2012-Feb-06 02:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.129 (still bad) 2012-Feb-06 02:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2012-Feb-06 02:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.128 (still bad) 2012-Feb-06 02:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.130 (still bad) 2012-Feb-06 02:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-06 02:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:26:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:26:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.038 1.102 1.131 2012-Feb-06 02:26:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.072 0.978 1.047 2012-Feb-06 02:26:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.117 0.904 1.047 2012-Feb-06 02:26:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.020 0.939 0.020 2012-Feb-06 02:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-06 02:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:27:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:27:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.051 1.100 1.128 2012-Feb-06 02:27:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.068 0.965 1.038 2012-Feb-06 02:27:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.115 0.903 1.046 2012-Feb-06 02:27:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.020 0.933 0.020 2012-Feb-06 02:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2012-Feb-06 02:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2012-Feb-06 02:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2012-Feb-06 02:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2012-Feb-06 02:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2012-Feb-06 02:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2012-Feb-06 02:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2012-Feb-06 02:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2012-Feb-06 02:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.133 (still bad) 2012-Feb-06 02:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2012-Feb-06 02:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2012-Feb-06 02:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:28:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:28:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.035 1.099 1.127 2012-Feb-06 02:28:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.066 0.964 1.036 2012-Feb-06 02:28:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.118 0.902 1.045 2012-Feb-06 02:28:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.020 0.933 0.021 2012-Feb-06 02:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-06 02:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-06 02:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-06 02:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-06 02:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-06 02:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-06 02:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2012-Feb-06 02:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2012-Feb-06 02:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-06 02:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2012-Feb-06 02:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-06 02:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.129 (still bad) 2012-Feb-06 02:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2012-Feb-06 02:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2012-Feb-06 02:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-06 02:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:29:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 02:29:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.037 1.102 1.130 2012-Feb-06 02:29:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.069 0.966 1.037 2012-Feb-06 02:29:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.112 0.901 1.042 2012-Feb-06 02:29:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.074 0.022 0.934 0.022 2012-Feb-06 02:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-06 02:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-06 02:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-06 02:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-06 02:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-06 02:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-06 02:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-06 02:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-06 02:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-06 02:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-06 02:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-06 02:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:30:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:30:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.037 1.104 1.135 2012-Feb-06 02:30:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.072 0.967 1.038 2012-Feb-06 02:30:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.114 0.901 1.045 2012-Feb-06 02:30:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.020 0.934 0.020 2012-Feb-06 02:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Feb-06 02:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:31:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.035 1.101 1.133 2012-Feb-06 02:31:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.073 0.979 1.046 2012-Feb-06 02:31:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.118 0.901 1.045 2012-Feb-06 02:31:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.020 0.947 0.020 2012-Feb-06 02:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-06 02:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-06 02:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-06 02:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.158 (still bad) 2012-Feb-06 02:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.153 (still bad) 2012-Feb-06 02:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2012-Feb-06 02:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Feb-06 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-06 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-06 02:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:32:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:32:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 1.034 1.100 1.131 2012-Feb-06 02:32:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 1.076 0.971 1.040 2012-Feb-06 02:32:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.120 0.905 1.048 2012-Feb-06 02:32:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.021 0.936 0.021 2012-Feb-06 02:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-06 02:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-06 02:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:33:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:33:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.037 1.100 1.134 2012-Feb-06 02:33:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.072 0.997 1.067 2012-Feb-06 02:33:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.121 0.905 1.048 2012-Feb-06 02:33:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.020 0.937 0.020 2012-Feb-06 02:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-06 02:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.180 (still bad) 2012-Feb-06 02:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.222 (still bad) 2012-Feb-06 02:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.276 (still bad) 2012-Feb-06 02:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.332 (still bad) 2012-Feb-06 02:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.367 (still bad) 2012-Feb-06 02:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.388 (still bad) 2012-Feb-06 02:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.388 (still bad) 2012-Feb-06 02:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.358 (still bad) 2012-Feb-06 02:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.316 (still bad) 2012-Feb-06 02:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.270 (still bad) 2012-Feb-06 02:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.217 (still bad) 2012-Feb-06 02:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.175 (still bad) 2012-Feb-06 02:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.149 (still bad) 2012-Feb-06 02:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:34:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:34:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.040 1.101 1.134 2012-Feb-06 02:34:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.073 0.972 1.042 2012-Feb-06 02:34:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.794 1.137 0.927 1.075 2012-Feb-06 02:34:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.019 0.936 0.020 2012-Feb-06 02:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:35:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:35:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.037 1.102 1.135 2012-Feb-06 02:35:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.076 0.974 1.044 2012-Feb-06 02:35:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.119 0.907 1.052 2012-Feb-06 02:35:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.021 0.941 0.021 2012-Feb-06 02:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-06 02:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-06 02:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:36:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:36:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.040 1.109 1.140 2012-Feb-06 02:36:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 1.092 0.976 1.045 2012-Feb-06 02:36:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.121 0.907 1.052 2012-Feb-06 02:36:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.019 0.937 0.020 2012-Feb-06 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 02:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-06 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Feb-06 02:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.146 (still bad) 2012-Feb-06 02:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.152 (still bad) 2012-Feb-06 02:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.153 (still bad) 2012-Feb-06 02:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.155 (still bad) 2012-Feb-06 02:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.157 (still bad) 2012-Feb-06 02:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.150 (still bad) 2012-Feb-06 02:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-06 02:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.145 (still bad) 2012-Feb-06 02:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:37:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:37:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 1.034 1.102 1.132 2012-Feb-06 02:37:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.072 0.970 1.040 2012-Feb-06 02:37:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.793 1.131 0.906 1.047 2012-Feb-06 02:37:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.019 0.938 0.019 2012-Feb-06 02:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-06 02:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-06 02:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:38:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:38:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.037 1.100 1.133 2012-Feb-06 02:38:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 1.071 0.968 1.041 2012-Feb-06 02:38:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.120 0.908 1.050 2012-Feb-06 02:38:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.019 0.939 0.019 2012-Feb-06 02:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-06 02:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-06 02:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-06 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-06 02:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:39:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:39:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.051 1.103 1.136 2012-Feb-06 02:39:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.071 0.972 1.041 2012-Feb-06 02:39:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.119 0.904 1.048 2012-Feb-06 02:39:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.020 0.939 0.020 2012-Feb-06 02:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-06 02:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-06 02:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:40:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:40:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.043 1.104 1.136 2012-Feb-06 02:40:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 1.080 0.972 1.043 2012-Feb-06 02:40:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.121 0.906 1.049 2012-Feb-06 02:40:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.021 0.940 0.021 2012-Feb-06 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Feb-06 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Feb-06 02:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.150 (still bad) 2012-Feb-06 02:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Feb-06 02:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Feb-06 02:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Feb-06 02:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-06 02:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2012-Feb-06 02:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-06 02:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-06 02:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.149 (still bad) 2012-Feb-06 02:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Feb-06 02:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Feb-06 02:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.155 (still bad) 2012-Feb-06 02:41:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:41:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.040 1.120 1.153 2012-Feb-06 02:41:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 1.076 0.974 1.044 2012-Feb-06 02:41:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.122 0.904 1.048 2012-Feb-06 02:41:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.021 0.940 0.021 2012-Feb-06 02:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.154 (still bad) 2012-Feb-06 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.158 (still bad) 2012-Feb-06 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.151 (still bad) 2012-Feb-06 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2012-Feb-06 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Feb-06 02:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-06 02:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-06 02:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Feb-06 02:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-06 02:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-06 02:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-06 02:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Feb-06 02:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-06 02:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-06 02:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-06 02:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-06 02:42:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:42:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.042 1.104 1.136 2012-Feb-06 02:42:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 1.096 0.975 1.046 2012-Feb-06 02:42:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.124 0.904 1.051 2012-Feb-06 02:42:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.020 0.940 0.021 2012-Feb-06 02:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Feb-06 02:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-06 02:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-06 02:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-06 02:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Feb-06 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-06 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Feb-06 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-06 02:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-06 02:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-06 02:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-06 02:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-06 02:43:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:43:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.039 1.107 1.138 2012-Feb-06 02:43:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 1.074 0.971 1.045 2012-Feb-06 02:43:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.121 0.916 1.064 2012-Feb-06 02:43:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.019 0.942 0.020 2012-Feb-06 02:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Feb-06 02:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-06 02:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-06 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-06 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Feb-06 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-06 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-06 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-06 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Feb-06 02:44:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:44:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.063 1.051 1.110 1.145 2012-Feb-06 02:44:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 1.074 0.975 1.046 2012-Feb-06 02:44:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.125 0.907 1.053 2012-Feb-06 02:44:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.019 0.943 0.020 2012-Feb-06 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-06 02:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-06 02:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-06 02:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:44:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:45:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:45:03 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:45:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:45:03 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Feb-06 02:45:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:45:03 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Feb-06 02:45:03 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-06 02:45:03 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-06 02:45:03 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-06 02:45:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 02:45:03 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-06 02:45:03 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-06 02:45:03 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2012-Feb-06 02:45:03 COMMAND run_command_line: EXECUTING command 61: 'IF LSTSLEW(AGES1367_p2_021) < 112438 THEN' 2012-Feb-06 02:45:04 LOG3 is_if_valid: Current source data: up 586.6 4.3 UP - - 96 1.7 2012-Feb-06 02:45:04 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_021) < 112438 2012-Feb-06 02:45:04 INFO5 is_if_valid: Condition parsed as: 11.383300333333334 < 11.410555555555556 2012-Feb-06 02:45:04 COMMAND run_command_line: EXECUTING command 62: 'FIXEDDRIFT az=218.58 alfaangle=-16.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_021 ra=113400.00 dec=212000.00' 2012-Feb-06 02:45:04 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-06 02:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:45:05 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 02:45:05 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 218.58 -16.0 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_021 113400.00 212000.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:45:05 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-06 02:45:05 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2012-Feb-06 02:45:05 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_019' 2012-Feb-06 02:45:05 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-06 02:45:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_021} 2012-Feb-06 02:45:05 INFO3 fixed_driftmap: Sending telescope to Az = 218.58 and ZA = 3.74 2012-Feb-06 02:45:05 LOG3 track_source: Calling 'track_source AGES1367_p2_021 218.58 3.7410888433 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:45:05 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:45:05 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-06 02:45:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_021} INFO {Slewing to source 'AGES1367_p2_021' ...} 2012-Feb-06 02:45:05 INFO1 track_source: Starting to track AGES1367_p2_021 2012-Feb-06 02:45:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_021" 2012-Feb-06 02:45:05 LOG3 vw_send: To DATATAKING: set ra 218.58 2012-Feb-06 02:45:05 LOG3 vw_send: To DATATAKING: set dec 3.7410888433 2012-Feb-06 02:45:05 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:45:05 LOG3 vw_send: To DATATAKING: pnt tr 218.58 3.7410888433 -CF 2012-Feb-06 02:45:05 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:45:05 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:45:05 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-06 02:45:05 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:45:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:45:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:45:05 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-06 02:45:05 START begin_task: Starting task 'rotate ALFA to -16 degrees' 2012-Feb-06 02:45:05 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-06 02:45:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -16 degrees ...} 2012-Feb-06 02:45:05 INFO2 rotate_alfa: ALFA commanded to -16.0 degrees 2012-Feb-06 02:45:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION -16.0 REPLY 2012-Feb-06 02:45:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 02:45:05 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 02:45:05 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_021" 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: set ra 218.58 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: set dec 3.7410888433 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: vw% 218.58 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: vw% 3.7410888433 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: pnt tr 218.58 3.7410888433 -CF 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:45:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:45:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 02:45:25 INFO3 alfa_motor: ALFA rotator in-position -16.00 degrees 2012-Feb-06 02:45:25 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 02:45:25 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-06 02:45:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:45:25 STOP finish_task: Finishing task 'rotate ALFA to -16 degrees' 2012-Feb-06 02:45:25 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-06 02:45:25 INFO2 finish_task: DONE finished configuration: rotating ALFA to -16 degrees 2012-Feb-06 02:45:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:45:25 STOP end_task: Finishing task 'rotate ALFA to -16 degrees' with status 'OK' 2012-Feb-06 02:45:25 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-06 02:45:25 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 02:45:25 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-06 02:45:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 02:45:25 LOG3 waittrk: Start waittrk 5 2012-Feb-06 02:45:25 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 02:45:25 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-06 02:45:30 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 02:45:30 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-06 02:45:30 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 02:45:30 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Feb-06 02:47:07 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 02:47:07 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Feb-06 02:47:07 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:47:07 INFO2 waittrk: Now tracking AGES1367_p2_021 2012-Feb-06 02:47:07 LOG4 waittrk: Current telescope position: Az = 577.98 ZA = 3.75 2012-Feb-06 02:47:07 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 02:47:07 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-06 02:47:07 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 02:47:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:47:07 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 02:47:07 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-06 02:47:07 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 02:47:07 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2012-Feb-06 02:47:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 02:47:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 02:47:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:47:07 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 02:47:07 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2012-Feb-06 02:47:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 02:47:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:08 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:47:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 02:47:08 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2012-Feb-06 02:47:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 02:47:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:47:08 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 02:47:08 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:47:08 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Feb-06 02:47:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:08 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:47:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:47:08 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Feb-06 02:47:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:47:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 02:47:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:47:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:47:08 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:47:08 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Feb-06 02:47:08 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:47:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:47:08 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Feb-06 02:47:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:47:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:47:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 02:47:08 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2012-Feb-06 02:47:08 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-06 02:47:08 INFO2 astwait: Waiting for 15 seconds from 06:47:08 to 06:47:23 UTC ... 2012-Feb-06 02:47:08 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 02:47:08 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-06 02:47:08 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-06 02:47:23 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 INFO3 astwait: Finished waiting 2012-Feb-06 02:47:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:47:23 LOG5 dopset_later: Calling 'dopset_later 61.073885625149927' 2012-Feb-06 02:47:23 INFO3 dopset_later: Setting Doppler correction for 02:48:23 (61.1 seconds from now) 2012-Feb-06 02:47:23 LOG5 antvel: Calling 'antvel 218.580000 3.741089 F Heliocentric 61.073885625149927' 2012-Feb-06 02:47:23 LOG2 antvel: Transforming current Az = 218.58 ZA = 3.74 to apparent RA = 11:34:39.9 Dec = +21:15:41.4 2012-Feb-06 02:47:23 LOG2 antvel: Parameters to Doppler: Heliocentric 24503 2012 37 0.0 2012-Feb-06 02:47:23 INFO5 antvel: Computed antenna velocity: -14.10295 km/s 2012-Feb-06 02:47:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.102946831500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-06 02:47:23 INFO4 dopset_gen: New sky frequencies: 1381.308409 1381.308409 1381.308409 1381.308409 1381.308409 1381.308409 1381.308409 1381.308409 1381.308409 2012-Feb-06 02:47:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.308409 sky0=1381.308409 sky1=1381.308409 sky2=1381.308409 sky3=1381.308409 sky4=1381.308409 sky5=1381.308409 sky6=1381.308409 sky7=1381.308409 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 02:47:23 LOG2 dopset_gen: Result from 'sky2syn': 1631.308409 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631308409.0} 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 02:47:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-06 02:47:23 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-06 02:47:23 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.9 Dec = +21:19:42.3 2012-Feb-06 02:47:23 LOG3 track_source: Calling 'track_source AGES1367_p2_021 113303.9 211942.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:47:23 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:47:23 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_021} INFO {Slewing to source 'AGES1367_p2_021' ...} 2012-Feb-06 02:47:23 INFO1 track_source: Starting to track AGES1367_p2_021 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_021" 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: set ra 113303.9 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: set dec 211942.3 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: pnt tr 113303.9 211942.3 -CJ 2012-Feb-06 02:47:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:47:23 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:47:23 LOG5 finish_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:47:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:47:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:47:23 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 02:47:23 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 02:47:23 LOG3 waittrk: Start waittrk 5 2012-Feb-06 02:47:23 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 02:47:23 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631308409.0} 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_021" 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: set ra 113303.9 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: set dec 211942.3 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: vw% 113303.9 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: vw% 211942.3 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.9 211942.3 -CJ 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:47:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 02:47:28 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-06 02:47:28 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 02:47:28 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Feb-06 02:47:36 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 02:47:36 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Feb-06 02:47:36 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:47:36 INFO2 waittrk: Now tracking AGES1367_p2_021 2012-Feb-06 02:47:36 LOG4 waittrk: Current telescope position: Az = 577.57 ZA = 3.72 2012-Feb-06 02:47:36 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 02:47:36 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-06 02:47:36 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 02:47:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:47:36 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 02:47:36 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-06 02:47:36 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-06 02:47:36 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-06 02:47:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-06 02:47:36 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-06 02:47:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 02:47:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 02:47:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:47:36 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 02:47:36 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-06 02:47:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 02:47:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:39 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:47:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 02:47:39 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-06 02:47:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 02:47:39 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 02:47:39 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-06 02:47:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 02:47:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:47:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:47:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:47:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 02:47:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 02:47:39 LOG5 begin_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-06 02:47:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 02:47:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-06 02:47:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-06 02:47:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-06 02:47:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-06 02:47:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 02:47:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 02:47:40 LOG5 end_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-06 02:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.022 1.020 ALFA beam 1: 1.054 0.889 2012-Feb-06 02:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.065 1.078 ALFA beam 3: 0.963 1.042 2012-Feb-06 02:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.781 1.099 ALFA beam 5: 1.085 1.003 2012-Feb-06 02:47:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.018 0.014 ALFA beam 7: 1.106 0.014 2012-Feb-06 02:47:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 02:47:40 LOG5 finish_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-06 02:47:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 02:47:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:47:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 02:47:40 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-06 02:47:40 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-06 02:47:40 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-06 02:47:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 02:47:40 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-06 02:47:40 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-06 02:47:40 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-06 02:47:40 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-06 02:47:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-06 02:47:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.020 1.054 0.889 2012-Feb-06 02:47:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.078 0.963 1.042 2012-Feb-06 02:47:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.099 1.085 1.003 2012-Feb-06 02:47:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.014 1.106 0.014 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.5 26.8 B 29.7 29.8 mn:A 0.1 -0.1 B -0.3 -0.4 gn: 11 11 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b0s1g0 rms:A 17.7 16.8 B 17.9 18.9 mn:A 0.0 -0.4 B -0.6 0.1 gn: 7 7 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.4 27.5 B 32.6 28.2 mn:A 0.2 0.5 B 0.1 0.1 gn: 7 11 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b1s1g0 rms:A 21.2 19.5 B 22.6 22.6 mn:A -0.4 -0.3 B 0.7 0.3 gn: 5 7 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.2 30.3 B 29.8 31.2 mn:A -0.0 -0.3 B 0.3 0.0 gn: 11 12 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b2s1g0 rms:A 20.1 20.3 B 24.1 22.4 mn:A 0.3 -0.1 B 0.1 0.3 gn: 8 10 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.2 30.9 B 30.2 26.9 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b3s1g0 rms:A 20.4 19.9 B 22.4 23.4 mn:A -0.2 0.4 B 0.2 0.1 gn: 9 10 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.5 B 28.4 28.5 mn:A -0.2 -0.4 B -0.5 0.0 gn: 13 11 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b4s1g0 rms:A 22.6 20.3 B 21.7 21.0 mn:A 0.1 0.1 B -0.2 0.2 gn: 13 10 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.4 30.2 B 29.1 29.1 mn:A 0.7 0.6 B 0.0 0.6 gn: 13 11 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b5s1g0 rms:A 19.8 19.6 B 20.8 20.6 mn:A -0.2 0.3 B -0.1 0.3 gn: 9 8 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.5 28.8 B 14.3 14.8 mn:A -0.4 0.2 B 0.5 -0.3 gn: 13 31 2012-Feb-06 02:47:47 INFO3 from_mock: From MOCK: b6s1g0 rms:A 20.0 18.2 B 11.3 11.0 mn:A 0.6 0.4 B 0.1 0.3 gn: 10 31 2012-Feb-06 02:47:47 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-06 02:47:47 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-06 02:47:47 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-06 02:47:47 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-06 02:47:47 LOG5 finish_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-06 02:47:47 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-06 02:47:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:47:47 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-06 02:47:47 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-06 02:47:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 02:47:47 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-06 02:47:47 LOG5 finish_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-06 02:47:47 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-06 02:47:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:47:47 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-06 02:47:47 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-06 02:47:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 02:47:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 02:47:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 02:47:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 02:47:48 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-06 02:47:48 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-06 02:47:48 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 02:47:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 02:47:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:47:48 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 02:47:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 02:47:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 02:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:48 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 02:47:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 02:47:48 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 02:47:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:47:48 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 02:47:48 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:47:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:47:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:47:48 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:47:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 02:47:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 02:47:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:47:48 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 02:47:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 02:47:48 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 02:47:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 02:47:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 02:47:48 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-06 02:47:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 02:47:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 02:47:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 02:47:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 02:47:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 02:47:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 02:47:48 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-06 02:47:48 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-06 02:47:48 LOG5 log_alfabeam: Parameters: 11.551083333333333 21.328416666666662 11.401205 2012.101619514792 -16.000025 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333329 21.328416666666662 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 1 11.551388231788371 21.229884035231240 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 2 11.557312683390228 21.295735629942872 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 3 11.556951575707423 21.395459605841562 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 4 11.550577621645703 21.427666709455124 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 5 11.544837117466312 21.358536387839571 2012-Feb-06 02:47:48 LOG4 log_alfabeam: ALFABEAM 6 11.545284240029842 21.260455461386275 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_021 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: patternid=203700061 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: scanid=203700062 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308409.0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308409.0 2012-Feb-06 02:47:48 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:47:48 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:47:48 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_021:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203700061:scanid=203700062:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308409.0:topobfreqhz=1306308409.0:filetype=1 2012-Feb-06 02:47:48 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:47:48 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:47:48 LOG5 end_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2012-Feb-06 02:47:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:47:48 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:47:48 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 02:47:48 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:47:48 LOG5 begin_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Feb-06 02:47:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0005.fits 2012-Feb-06 02:47:49 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:47:49 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:47:49 LOG5 end_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Feb-06 02:47:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:47:49 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700062 2012-Feb-06 02:47:49 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:47:49 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Feb-06 02:47:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120206.a2048.0005.fits} 2012-Feb-06 02:47:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:47:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-06 02:47:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24470.00 2012-Feb-06 02:47:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:47:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:47:51 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:47:51 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 02:47:51 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:47:54 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:47:54.01 2012-Feb-06 02:47:54 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328510874.01 Mon Feb 6 02:47:54 2012 2012-Feb-06 02:47:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308409 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.448 (still bad) 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:47:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:48:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:48:00 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:48:00 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:48:00 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:48:00 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 02:48:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 02:48:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 02:48:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 02:48:00 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 02:48:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 02:48:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 02:48:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 02:48:00 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-06 02:48:00 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:48:00 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-06 02:48:00 LOG5 log_alfabeam: Parameters: 11.551083333333333 21.328416666666662 11.404268 2012.1016198633611 -16.000025 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333320 21.328416666666662 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 1 11.551454173890896 21.229931416733070 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 2 11.557334489457078 21.296551531255393 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 3 11.556906140945674 21.396229256633237 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 4 11.550509660827309 21.427597739713718 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 5 11.544816982409916 21.357700211026543 2012-Feb-06 02:48:00 LOG4 log_alfabeam: ALFABEAM 6 11.545330746975271 21.259688739535871 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_021 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: patternid=203700061 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: scanid=203700063 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308409.0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308409.0 2012-Feb-06 02:48:00 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:48:00 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:48:00 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_021:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203700061:scanid=203700063:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308409.0:topobfreqhz=1306308409.0:filetype=1 2012-Feb-06 02:48:00 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:48:00 LOG5 begin_task: Level: (5) ID = <10311> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:48:00 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:48:00 LOG5 end_task: Level: (5) ID = <10311> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:48:00 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:48:00 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 02:48:00 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:48:00 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:48:00 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:48:00 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:48:00 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700063 2012-Feb-06 02:48:00 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:48:00 LOG5 begin_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Feb-06 02:48:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:48:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24481.00 2012-Feb-06 02:48:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-06 02:48:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:48:01 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.580 (still bad) 2012-Feb-06 02:48:03 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:48:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 02:48:03 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:03 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 02:48:06 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:48:06.01 2012-Feb-06 02:48:06 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328510886.01 Mon Feb 6 02:48:06 2012 2012-Feb-06 02:48:06 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308409 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:48:06 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-06 02:48:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 02:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:48:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 02:48:12 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 02:48:12 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 02:48:12 LOG5 end_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 02:48:12 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 02:48:12 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-06 02:48:12 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-06 02:48:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:48:12 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-06 02:48:12 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-06 02:48:12 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 218.58 and ZA = 3.74 2012-Feb-06 02:48:12 LOG3 track_source: Calling 'track_source AGES1367_p2_021 218.58 3.7410888433 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 02:48:12 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 02:48:12 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_021} INFO {Slewing to source 'AGES1367_p2_021' ...} 2012-Feb-06 02:48:12 INFO1 track_source: Starting to track AGES1367_p2_021 2012-Feb-06 02:48:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_021" 2012-Feb-06 02:48:12 LOG3 vw_send: To DATATAKING: set ra 218.58 2012-Feb-06 02:48:12 LOG3 vw_send: To DATATAKING: set dec 3.7410888433 2012-Feb-06 02:48:12 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 02:48:12 LOG3 vw_send: To DATATAKING: pnt tr 218.58 3.7410888433 -CF 2012-Feb-06 02:48:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:48:12 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 02:48:12 LOG5 finish_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 02:48:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 02:48:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 02:48:12 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.6 Start = 11:24:39.5 LST = 11:24:27.4 diff = 12.1 secs 2012-Feb-06 02:48:12 INFO2 fixed_driftmap: Waiting 10.1 seconds for RA 11:34:40 2012-Feb-06 02:48:12 INFO2 lstwait: Waiting for 10.1 secs from LST 11:24:27 to LST 11:24:38 ... 2012-Feb-06 02:48:12 LOG4 send_obs_status: To obs_status: <1> TASKTIME 10.080698622270036 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 02:48:12 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-06 02:48:12 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_021" 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: set ra 218.58 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: set dec 3.7410888433 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: vw% 218.58 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: vw% 3.7410888433 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: pnt tr 218.58 3.7410888433 -CF 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 02:48:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 02:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:48:22 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-06 02:48:22 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-06 02:48:22 LOG4 lstwait: Finished waiting 0.92 seconds late 2012-Feb-06 02:48:22 INFO3 lstwait: Finished waiting 2012-Feb-06 02:48:22 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 02:48:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-06 02:48:22 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 02:48:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-06 02:48:22 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-06 02:48:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 02:48:22 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Feb-06 02:48:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-06 02:48:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_021 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: patternid=203700064 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: scanid=203700064 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308409.0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308409.0 2012-Feb-06 02:48:22 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 02:48:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 02:48:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_021:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203700064:scanid=203700064:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308409.0:topobfreqhz=1306308409.0:filetype=1 2012-Feb-06 02:48:22 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 02:48:22 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2012-Feb-06 02:48:22 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 02:48:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 02:48:22 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2012-Feb-06 02:48:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 02:48:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 02:48:22 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-06 02:48:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 02:48:22 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Feb-06 02:48:22 LOG4 from_mock: From MOCK: starok 2012-Feb-06 02:48:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 02:48:22 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Feb-06 02:48:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 02:48:22 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203700064 2012-Feb-06 02:48:23 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 02:48:23 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Feb-06 02:48:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 02:48:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 02:48:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 02:48:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-06 02:48:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24504.00 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308409 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 02:48:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308409 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 02:48:25 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2012-Feb-06 02:48:25 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 02:48:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-06 02:48:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 02:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 02:48:28 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:48:28.00 2012-Feb-06 02:48:28 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328510908.00 Mon Feb 6 02:48:28 2012 2012-Feb-06 02:48:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 02:48:29 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2012-Feb-06 02:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:48:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 02:48:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 1.022 1.056 0.891 2012-Feb-06 02:48:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.080 0.963 1.039 2012-Feb-06 02:48:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.100 1.084 1.001 2012-Feb-06 02:48:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.020 1.109 0.020 2012-Feb-06 02:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-06 02:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 02:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-06 02:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 02:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 02:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-06 02:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2012-Feb-06 02:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2012-Feb-06 02:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:49:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 02:49:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 1.023 1.056 0.891 2012-Feb-06 02:49:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.083 0.969 1.046 2012-Feb-06 02:49:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.102 1.088 1.005 2012-Feb-06 02:49:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.022 1.109 0.022 2012-Feb-06 02:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 02:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2012-Feb-06 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-06 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-06 02:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 02:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2012-Feb-06 02:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:50:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-06 02:50:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.021 1.056 0.889 2012-Feb-06 02:50:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.078 0.965 1.041 2012-Feb-06 02:50:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.103 1.087 1.003 2012-Feb-06 02:50:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.023 1.109 0.023 2012-Feb-06 02:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 02:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Feb-06 02:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 02:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 02:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.107 (still bad) 2012-Feb-06 02:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:51:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 02:51:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.023 1.056 0.891 2012-Feb-06 02:51:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.066 1.079 0.964 1.038 2012-Feb-06 02:51:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.100 1.085 1.001 2012-Feb-06 02:51:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.022 1.109 0.022 2012-Feb-06 02:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 02:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 02:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 02:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-06 02:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 02:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 02:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-06 02:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 02:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 02:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 02:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 02:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 02:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 02:52:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 02:52:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.026 1.057 0.890 2012-Feb-06 02:52:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.065 1.079 0.965 1.040 2012-Feb-06 02:52:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.098 1.086 1.003 2012-Feb-06 02:52:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.024 0.022 1.113 0.022 2012-Feb-06 02:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-06 02:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2012-Feb-06 02:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2012-Feb-06 02:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 02:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 02:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 02:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-06 02:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:53:39 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55963.287234 to 55963.287245! 2012-Feb-06 02:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:53:40 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55963.287234 - 55963.287257)! 2012-Feb-06 02:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:53:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-06 02:53:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.024 1.069 0.903 2012-Feb-06 02:53:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.081 0.968 1.042 2012-Feb-06 02:53:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.099 1.084 1.002 2012-Feb-06 02:53:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.023 1.111 0.023 2012-Feb-06 02:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2012-Feb-06 02:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.112 (still bad) 2012-Feb-06 02:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2012-Feb-06 02:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-06 02:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2012-Feb-06 02:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Feb-06 02:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2012-Feb-06 02:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.140 (still bad) 2012-Feb-06 02:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2012-Feb-06 02:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.136 (still bad) 2012-Feb-06 02:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Feb-06 02:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-06 02:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-06 02:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-06 02:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2012-Feb-06 02:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2012-Feb-06 02:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2012-Feb-06 02:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2012-Feb-06 02:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2012-Feb-06 02:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:54:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 02:54:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.024 1.061 0.893 2012-Feb-06 02:54:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.083 0.971 1.044 2012-Feb-06 02:54:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.102 1.097 1.012 2012-Feb-06 02:54:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.024 1.118 0.024 2012-Feb-06 02:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-06 02:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-06 02:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-06 02:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-06 02:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-06 02:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-06 02:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 02:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-06 02:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-06 02:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Feb-06 02:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.113 (still bad) 2012-Feb-06 02:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-06 02:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-06 02:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-06 02:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-06 02:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-06 02:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-06 02:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-06 02:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-06 02:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:55:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 02:55:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.028 1.064 0.896 2012-Feb-06 02:55:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.092 0.976 1.051 2012-Feb-06 02:55:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 1.111 1.092 1.008 2012-Feb-06 02:55:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.024 1.117 0.024 2012-Feb-06 02:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-06 02:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-06 02:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 02:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-06 02:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 02:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-06 02:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-06 02:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 02:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 02:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 02:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 02:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-06 02:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-06 02:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-06 02:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-06 02:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-06 02:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-06 02:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-06 02:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-06 02:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-06 02:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 02:56:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:56:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 1.021 1.058 0.891 2012-Feb-06 02:56:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.086 0.998 1.071 2012-Feb-06 02:56:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.795 1.119 1.088 1.004 2012-Feb-06 02:56:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.021 1.111 0.021 2012-Feb-06 02:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-06 02:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-06 02:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-06 02:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 02:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-06 02:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-06 02:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-06 02:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-06 02:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-06 02:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-06 02:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-06 02:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-06 02:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-06 02:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-06 02:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-06 02:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-06 02:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-06 02:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.146 (still bad) 2012-Feb-06 02:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.139 (still bad) 2012-Feb-06 02:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-06 02:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-06 02:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-06 02:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 02:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 02:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 02:57:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 02:57:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.021 1.054 0.888 2012-Feb-06 02:57:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.084 0.967 1.041 2012-Feb-06 02:57:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.105 1.089 1.003 2012-Feb-06 02:57:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.020 1.115 0.019 2012-Feb-06 02:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 02:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-06 02:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 02:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 02:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 02:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 02:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 02:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 02:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-06 02:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 02:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 02:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-06 02:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 02:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:58:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 02:58:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.020 1.053 0.889 2012-Feb-06 02:58:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.081 0.965 1.039 2012-Feb-06 02:58:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.101 1.082 0.999 2012-Feb-06 02:58:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.021 1.107 0.021 2012-Feb-06 02:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 02:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 02:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-06 02:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 02:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 02:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-06 02:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 02:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 02:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 02:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 02:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-06 02:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 02:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2012-Feb-06 02:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2012-Feb-06 02:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2012-Feb-06 02:59:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-06 02:59:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.023 1.057 0.892 2012-Feb-06 02:59:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 1.113 0.969 1.040 2012-Feb-06 02:59:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.099 1.085 1.000 2012-Feb-06 02:59:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.023 1.110 0.023 2012-Feb-06 03:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 03:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 03:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2012-Feb-06 03:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 03:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 03:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Feb-06 03:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 03:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 03:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2012-Feb-06 03:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 03:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 03:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Feb-06 03:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-06 03:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-06 03:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-06 03:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 03:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 03:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 03:01:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 03:01:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.024 1.059 0.890 2012-Feb-06 03:01:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.069 1.078 0.976 1.050 2012-Feb-06 03:01:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.102 1.086 1.001 2012-Feb-06 03:01:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.025 0.021 1.113 0.021 2012-Feb-06 03:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-06 03:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-06 03:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 03:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-06 03:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 03:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-06 03:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 03:02:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-06 03:02:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.023 1.056 0.891 2012-Feb-06 03:02:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.068 1.082 0.965 1.039 2012-Feb-06 03:02:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.101 1.088 1.003 2012-Feb-06 03:02:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.022 1.109 0.022 2012-Feb-06 03:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 03:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 03:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Feb-06 03:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-06 03:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Feb-06 03:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-06 03:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 03:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 03:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 03:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 03:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 03:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:03:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 03:03:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.025 1.058 0.893 2012-Feb-06 03:03:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.070 1.084 0.964 1.040 2012-Feb-06 03:03:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.103 1.086 1.002 2012-Feb-06 03:03:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.020 1.109 0.020 2012-Feb-06 03:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 03:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-06 03:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 03:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 03:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 03:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 03:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-06 03:04:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 03:04:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.021 1.058 0.891 2012-Feb-06 03:04:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 1.099 0.966 1.042 2012-Feb-06 03:04:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.103 1.084 1.001 2012-Feb-06 03:04:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.022 0.021 1.108 0.021 2012-Feb-06 03:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 03:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 03:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 03:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-06 03:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 03:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Feb-06 03:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-06 03:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 03:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-06 03:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:05:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-06 03:05:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.026 1.058 0.892 2012-Feb-06 03:05:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.071 1.083 0.969 1.044 2012-Feb-06 03:05:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 1.104 1.087 1.003 2012-Feb-06 03:05:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.020 1.116 0.020 2012-Feb-06 03:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Feb-06 03:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 03:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 03:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-06 03:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 03:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 03:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-06 03:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 03:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-06 03:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 03:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-06 03:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 03:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-06 03:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 03:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-06 03:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:06:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 03:06:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.028 1.057 0.894 2012-Feb-06 03:06:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.087 1.019 1.104 2012-Feb-06 03:06:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 1.109 1.087 1.005 2012-Feb-06 03:06:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.027 0.021 1.115 0.021 2012-Feb-06 03:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-06 03:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 03:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 03:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 03:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-06 03:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-06 03:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-06 03:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 03:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 03:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 03:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 03:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-06 03:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-06 03:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-06 03:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-06 03:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-06 03:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-06 03:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-06 03:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Feb-06 03:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 03:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 03:07:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-06 03:07:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.026 1.060 0.895 2012-Feb-06 03:07:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.067 1.082 0.967 1.042 2012-Feb-06 03:07:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.101 1.097 1.012 2012-Feb-06 03:07:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.019 1.108 0.020 2012-Feb-06 03:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 03:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 03:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 03:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 03:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 03:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-06 03:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 03:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-06 03:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Feb-06 03:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-06 03:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 03:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 03:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-06 03:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-06 03:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-06 03:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-06 03:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-06 03:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-06 03:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-06 03:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-06 03:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-06 03:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.111 (still bad) 2012-Feb-06 03:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:08:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-06 03:08:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.026 1.058 0.894 2012-Feb-06 03:08:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.073 1.083 0.967 1.041 2012-Feb-06 03:08:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.101 1.088 1.005 2012-Feb-06 03:08:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.021 0.021 1.110 0.022 2012-Feb-06 03:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-06 03:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-06 03:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-06 03:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 03:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-06 03:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-06 03:08:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 03:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-06 03:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-06 03:08:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 03:08:29 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 03:08:29 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 03:08:29 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Feb-06 03:08:29 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 03:08:29 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Feb-06 03:08:29 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-06 03:08:29 LOG5 finish_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2012-Feb-06 03:08:29 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-06 03:08:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-06 03:08:29 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-06 03:08:29 LOG5 end_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2012-Feb-06 03:08:29 COMMAND run_command_line: EXECUTING command 65: 'ENDIF' 2012-Feb-06 03:08:29 COMMAND run_command_line: EXECUTING command 68: 'IF LSTSLEW(AGES1367_p2_023) < 115039 THEN' 2012-Feb-06 03:08:30 LOG3 is_if_valid: Current source data: up 500.5 3.7 UP - - 73 3.2 2012-Feb-06 03:08:30 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_023) < 115039 2012-Feb-06 03:08:30 INFO5 is_if_valid: Condition parsed as: 11.799925333333332 < 11.844166666666668 2012-Feb-06 03:08:30 COMMAND run_command_line: EXECUTING command 69: 'FIXEDDRIFT az=127.87 alfaangle=68.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_023 ra=113400.00 dec=211700.00' 2012-Feb-06 03:08:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-06 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-06 03:08:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-06 03:08:30 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 127.87 68.3 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_023 113400.00 211700.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 03:08:30 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-06 03:08:30 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2012-Feb-06 03:08:30 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_021' 2012-Feb-06 03:08:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-06 03:08:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_023} 2012-Feb-06 03:08:31 INFO3 fixed_driftmap: Sending telescope to Az = 127.87 and ZA = 4.73 2012-Feb-06 03:08:31 LOG3 track_source: Calling 'track_source AGES1367_p2_023 127.87 4.7253587690 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 03:08:31 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 03:08:31 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2012-Feb-06 03:08:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_023} INFO {Slewing to source 'AGES1367_p2_023' ...} 2012-Feb-06 03:08:31 INFO1 track_source: Starting to track AGES1367_p2_023 2012-Feb-06 03:08:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_023" 2012-Feb-06 03:08:31 LOG3 vw_send: To DATATAKING: set ra 127.87 2012-Feb-06 03:08:31 LOG3 vw_send: To DATATAKING: set dec 4.7253587690 2012-Feb-06 03:08:31 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 03:08:31 LOG3 vw_send: To DATATAKING: pnt tr 127.87 4.7253587690 -CF 2012-Feb-06 03:08:31 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 03:08:31 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 03:08:31 LOG5 finish_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2012-Feb-06 03:08:31 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 03:08:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:08:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 03:08:31 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2012-Feb-06 03:08:31 START begin_task: Starting task 'rotate ALFA to +68.3 degrees' 2012-Feb-06 03:08:31 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Feb-06 03:08:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +68.3 degrees ...} 2012-Feb-06 03:08:31 INFO2 rotate_alfa: ALFA commanded to +68.3 degrees 2012-Feb-06 03:08:31 LOG3 sock_errsend: To ALFAMOTOR: POSITION 68.3 REPLY 2012-Feb-06 03:08:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-06 03:08:31 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-06 03:08:31 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_023" 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: set ra 127.87 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: set dec 4.7253587690 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: vw% 127.87 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: vw% 4.7253587690 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: pnt tr 127.87 4.7253587690 -CF 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 03:08:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:09:19 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-06 03:09:19 INFO3 alfa_motor: ALFA rotator in-position +68.30 degrees 2012-Feb-06 03:09:19 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-06 03:09:19 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2012-Feb-06 03:09:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 03:09:19 STOP finish_task: Finishing task 'rotate ALFA to +68.3 degrees' 2012-Feb-06 03:09:19 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Feb-06 03:09:19 INFO2 finish_task: DONE finished configuration: rotating ALFA to +68.3 degrees 2012-Feb-06 03:09:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:09:19 STOP end_task: Finishing task 'rotate ALFA to +68.3 degrees' with status 'OK' 2012-Feb-06 03:09:19 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Feb-06 03:09:19 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 03:09:19 LOG5 begin_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2012-Feb-06 03:09:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 03:09:19 LOG3 waittrk: Start waittrk 5 2012-Feb-06 03:09:19 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 03:09:19 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2012-Feb-06 03:09:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 03:09:24 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2012-Feb-06 03:09:24 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 03:09:24 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2012-Feb-06 03:12:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 03:12:21 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2012-Feb-06 03:12:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 03:12:21 INFO2 waittrk: Now tracking AGES1367_p2_023 2012-Feb-06 03:12:21 LOG4 waittrk: Current telescope position: Az = 487.61 ZA = 4.73 2012-Feb-06 03:12:21 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 03:12:21 LOG5 finish_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2012-Feb-06 03:12:21 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 03:12:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:12:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 03:12:21 LOG5 end_task: Level: (3) ID = <10324> Status = 0 0 0 0 ok 2012-Feb-06 03:12:21 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 03:12:21 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2012-Feb-06 03:12:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 03:12:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 03:12:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 03:12:21 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 03:12:21 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2012-Feb-06 03:12:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 03:12:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 03:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:12:22 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 03:12:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 03:12:22 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2012-Feb-06 03:12:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 03:12:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 03:12:22 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 03:12:22 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 03:12:22 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2012-Feb-06 03:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:12:22 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 03:12:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 03:12:22 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2012-Feb-06 03:12:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 03:12:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 03:12:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 03:12:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 03:12:22 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 03:12:22 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2012-Feb-06 03:12:22 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 03:12:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 03:12:22 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2012-Feb-06 03:12:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 03:12:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 03:12:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 03:12:22 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2012-Feb-06 03:12:22 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-06 03:12:22 INFO2 astwait: Waiting for 57 seconds from 07:12:22 to 07:13:19 UTC ... 2012-Feb-06 03:12:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 57 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 03:12:22 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-06 03:12:22 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-06 03:13:19 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 INFO3 astwait: Finished waiting 2012-Feb-06 03:13:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 03:13:19 LOG5 dopset_later: Calling 'dopset_later 61.389018949340837' 2012-Feb-06 03:13:19 INFO3 dopset_later: Setting Doppler correction for 03:14:19 (61.4 seconds from now) 2012-Feb-06 03:13:19 LOG5 antvel: Calling 'antvel 127.870000 4.725359 F Heliocentric 61.389018949340837' 2012-Feb-06 03:13:19 LOG2 antvel: Transforming current Az = 127.87 ZA = 4.73 to apparent RA = 11:34:39.9 Dec = +21:12:41.4 2012-Feb-06 03:13:19 LOG2 antvel: Parameters to Doppler: Heliocentric 26059 2012 37 0.0 2012-Feb-06 03:13:19 INFO5 antvel: Computed antenna velocity: -14.06124 km/s 2012-Feb-06 03:13:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-14.061243960500001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-06 03:13:19 INFO4 dopset_gen: New sky frequencies: 1381.308216 1381.308216 1381.308216 1381.308216 1381.308216 1381.308216 1381.308216 1381.308216 1381.308216 2012-Feb-06 03:13:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.308216 sky0=1381.308216 sky1=1381.308216 sky2=1381.308216 sky3=1381.308216 sky4=1381.308216 sky5=1381.308216 sky6=1381.308216 sky7=1381.308216 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-06 03:13:19 LOG2 dopset_gen: Result from 'sky2syn': 1631.308216 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631308216.0} 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 03:13:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-06 03:13:19 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-06 03:13:19 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.6 Dec = +21:16:42.3 2012-Feb-06 03:13:19 LOG3 track_source: Calling 'track_source AGES1367_p2_023 113303.6 211642.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 03:13:19 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 03:13:19 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_023} INFO {Slewing to source 'AGES1367_p2_023' ...} 2012-Feb-06 03:13:19 INFO1 track_source: Starting to track AGES1367_p2_023 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_023" 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: set ra 113303.6 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: set dec 211642.3 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: pnt tr 113303.6 211642.3 -CJ 2012-Feb-06 03:13:19 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 03:13:19 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 03:13:19 LOG5 finish_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 03:13:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:13:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 03:13:19 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 START begin_task: Starting task 'waiting on telescope' 2012-Feb-06 03:13:19 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-06 03:13:19 LOG3 waittrk: Start waittrk 5 2012-Feb-06 03:13:19 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-06 03:13:19 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631308216.0} 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_023" 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: set ra 113303.6 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: set dec 211642.3 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: vw% 113303.6 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: vw% 211642.3 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.6 211642.3 -CJ 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 03:13:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:13:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-06 03:13:24 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2012-Feb-06 03:13:24 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-06 03:13:24 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2012-Feb-06 03:13:26 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-06 03:13:26 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2012-Feb-06 03:13:26 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-06 03:13:26 INFO2 waittrk: Now tracking AGES1367_p2_023 2012-Feb-06 03:13:26 LOG4 waittrk: Current telescope position: Az = 487.45 ZA = 4.74 2012-Feb-06 03:13:26 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-06 03:13:26 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Feb-06 03:13:26 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-06 03:13:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:13:26 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-06 03:13:26 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Feb-06 03:13:26 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-06 03:13:26 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2012-Feb-06 03:13:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-06 03:13:26 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-06 03:13:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-06 03:13:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-06 03:13:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 03:13:26 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-06 03:13:26 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2012-Feb-06 03:13:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-06 03:13:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 03:13:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:13:29 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 03:13:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-06 03:13:29 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2012-Feb-06 03:13:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-06 03:13:29 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-06 03:13:29 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Feb-06 03:13:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 03:13:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 03:13:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 03:13:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 03:13:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-06 03:13:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-06 03:13:29 LOG5 begin_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2012-Feb-06 03:13:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:13:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-06 03:13:30 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-06 03:13:30 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-06 03:13:30 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-06 03:13:30 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-06 03:13:30 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-06 03:13:30 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-06 03:13:30 LOG5 end_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2012-Feb-06 03:13:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.021 1.049 ALFA beam 1: 1.057 0.914 2012-Feb-06 03:13:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.100 1.100 ALFA beam 3: 0.983 1.036 2012-Feb-06 03:13:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.796 1.103 ALFA beam 5: 1.087 1.043 2012-Feb-06 03:13:30 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.001 0.030 ALFA beam 7: 1.086 0.030 2012-Feb-06 03:13:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-06 03:13:30 LOG5 finish_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Feb-06 03:13:30 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-06 03:13:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:13:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-06 03:13:30 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Feb-06 03:13:30 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-06 03:13:30 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2012-Feb-06 03:13:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-06 03:13:30 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-06 03:13:30 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-06 03:13:30 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-06 03:13:30 LOG5 begin_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2012-Feb-06 03:13:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.030 < 0.75)! 2012-Feb-06 03:13:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 1.049 1.057 0.914 2012-Feb-06 03:13:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 1.100 0.983 1.036 2012-Feb-06 03:13:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.796 1.103 1.087 1.043 2012-Feb-06 03:13:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.030 1.086 0.030 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b0s0g0 rms:A 34.1 29.9 B 29.8 29.9 mn:A 0.2 -0.1 B -0.2 -0.3 gn: 12 11 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.4 29.1 B 27.8 29.4 mn:A -0.0 -0.5 B -0.7 -0.1 gn: 12 11 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b1s0g0 rms:A 32.5 30.5 B 32.7 28.4 mn:A 0.2 0.6 B 0.2 0.0 gn: 8 11 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b1s1g0 rms:A 28.8 26.5 B 27.6 27.6 mn:A -0.4 -0.4 B 0.7 0.2 gn: 8 9 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.3 30.4 B 29.8 31.2 mn:A 0.0 -0.3 B 0.4 0.1 gn: 11 12 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.7 29.0 B 30.7 28.5 mn:A 0.2 -0.2 B 0.1 0.3 gn: 11 12 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 31.0 B 33.4 29.8 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 13 13 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.1 28.4 B 28.3 29.5 mn:A -0.2 0.4 B 0.2 0.1 gn: 12 12 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.5 28.6 B 31.7 31.9 mn:A -0.3 -0.3 B -0.5 -0.0 gn: 13 12 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 30.8 29.7 mn:A 0.1 -0.1 B -0.3 0.1 gn: 16 13 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.0 29.9 B 29.3 29.3 mn:A 0.7 0.6 B 0.2 0.6 gn: 13 11 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.4 31.1 B 29.6 29.4 mn:A -0.3 0.2 B -0.1 0.2 gn: 13 11 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.8 28.2 B 14.5 15.0 mn:A -0.4 0.3 B 0.5 -0.2 gn: 13 31 2012-Feb-06 03:13:38 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.4 28.5 B 11.5 11.2 mn:A 0.6 0.4 B 0.1 0.2 gn: 14 31 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-06 03:13:38 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-06 03:13:38 LOG5 finish_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-06 03:13:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 03:13:38 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-06 03:13:38 LOG5 finish_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-06 03:13:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Feb-06 03:13:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Feb-06 03:13:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Feb-06 03:13:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Feb-06 03:13:38 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-06 03:13:38 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-06 03:13:38 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-06 03:13:38 START begin_task: Starting task 'selecting calibration type' 2012-Feb-06 03:13:38 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-06 03:13:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-06 03:13:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 03:13:38 START begin_task: Starting task 'waiting on setcal' 2012-Feb-06 03:13:38 LOG5 begin_task: Level: (5) ID = <10344> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Feb-06 03:13:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-06 03:13:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-06 03:13:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:13:38 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (5) ID = <10344> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-06 03:13:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 03:13:38 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-06 03:13:38 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 03:13:38 LOG5 begin_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:13:38 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 03:13:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-06 03:13:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-06 03:13:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-06 03:13:38 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-06 03:13:38 LOG5 begin_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-06 03:13:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-06 03:13:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-06 03:13:38 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2012-Feb-06 03:13:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-06 03:13:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-06 03:13:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-06 03:13:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 03:13:39 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 03:13:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-06 03:13:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 03:13:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 03:13:39 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-06 03:13:39 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 03:13:39 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-06 03:13:39 LOG5 log_alfabeam: Parameters: 11.551000000000002 21.278416666666661 11.832939 2012.101668631328 68.299934 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 0 11.551000000000007 21.278416666666661 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 1 11.553520776514324 21.183979009166716 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 2 11.558133086427050 21.246817868341381 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 3 11.555734494603628 21.341773215604107 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 4 11.548598109992197 21.374054080464205 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 5 11.543818875621927 21.308675883377227 2012-Feb-06 03:13:39 LOG4 log_alfabeam: ALFABEAM 6 11.546343979158841 21.213556314628377 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_023 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: patternid=203700064 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: scanid=203700065 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308216.0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308216.0 2012-Feb-06 03:13:39 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 03:13:39 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 03:13:39 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_023:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203700064:scanid=203700065:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308216.0:topobfreqhz=1306308216.0:filetype=1 2012-Feb-06 03:13:39 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 03:13:39 LOG5 begin_task: Level: (5) ID = <10349> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 03:13:39 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 03:13:39 LOG5 end_task: Level: (5) ID = <10349> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 03:13:39 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 03:13:39 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 03:13:39 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 03:13:39 LOG5 begin_task: Level: (5) ID = <10350> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20120206.a2048.0006.fits 2012-Feb-06 03:13:39 LOG4 from_mock: From MOCK: starok 2012-Feb-06 03:13:39 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 03:13:39 LOG5 end_task: Level: (5) ID = <10350> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 03:13:39 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700065 2012-Feb-06 03:13:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 03:13:39 LOG5 begin_task: Level: (5) ID = <10351> Status = 0 0 0 0 ok 2012-Feb-06 03:13:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120206.a2048.0006.fits} 2012-Feb-06 03:13:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 03:13:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-06 03:13:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26020.00 2012-Feb-06 03:13:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 03:13:40 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 03:13:42 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 03:13:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 03:13:42 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:42 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:45 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:13:45.01 2012-Feb-06 03:13:45 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328512425.01 Mon Feb 6 03:13:45 2012 2012-Feb-06 03:13:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308216 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 03:13:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 03:13:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 03:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.546 (still bad) 2012-Feb-06 03:13:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 03:13:51 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 03:13:51 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 03:13:51 LOG5 end_task: Level: (5) ID = <10351> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 03:13:51 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-06 03:13:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-06 03:13:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-06 03:13:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-06 03:13:51 LOG5 begin_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-06 03:13:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-06 03:13:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-06 03:13:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-06 03:13:51 LOG5 end_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-06 03:13:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 03:13:51 LOG5 begin_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-06 03:13:51 LOG5 log_alfabeam: Parameters: 11.551000000000002 21.278416666666661 11.836281 2012.1016690115853 68.299934 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 0 11.551000000000014 21.278416666666654 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 1 11.553560822047213 21.184187505987943 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 2 11.558146729347252 21.247422435778734 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 3 11.555706881955143 21.342175482486798 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 4 11.548556537114479 21.373845919158821 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 5 11.543806184610137 21.308077384156835 2012-Feb-06 03:13:51 LOG4 log_alfabeam: ALFABEAM 6 11.546371632392601 21.213172264639329 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_023 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: patternid=203700064 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: scanid=203700066 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308216.0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308216.0 2012-Feb-06 03:13:51 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 03:13:51 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 03:13:51 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_023:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203700064:scanid=203700066:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308216.0:topobfreqhz=1306308216.0:filetype=1 2012-Feb-06 03:13:51 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 03:13:51 LOG5 begin_task: Level: (5) ID = <10354> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 03:13:51 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 03:13:51 LOG5 end_task: Level: (5) ID = <10354> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 03:13:51 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 03:13:51 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-06 03:13:51 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 03:13:51 LOG5 begin_task: Level: (5) ID = <10355> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG4 from_mock: From MOCK: starok 2012-Feb-06 03:13:51 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 03:13:51 LOG5 end_task: Level: (5) ID = <10355> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 03:13:51 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203700066 2012-Feb-06 03:13:51 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 03:13:51 LOG5 begin_task: Level: (5) ID = <10356> Status = 0 0 0 0 ok 2012-Feb-06 03:13:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 03:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.546 (still bad) 2012-Feb-06 03:13:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-06 03:13:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26032.00 2012-Feb-06 03:13:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 03:13:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 03:13:54 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 03:13:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-06 03:13:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-06 03:13:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:13:57.01 2012-Feb-06 03:13:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328512437.01 Mon Feb 6 03:13:57 2012 2012-Feb-06 03:13:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308216 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 03:13:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 03:13:57 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-06 03:13:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-06 03:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.433 (still bad) 2012-Feb-06 03:14:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-06 03:14:03 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-06 03:14:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-06 03:14:03 LOG5 end_task: Level: (5) ID = <10356> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-06 03:14:03 LOG5 end_task: Level: (4) ID = <10353> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-06 03:14:03 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-06 03:14:03 LOG5 finish_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-06 03:14:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:14:03 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-06 03:14:03 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-06 03:14:03 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 127.87 and ZA = 4.73 2012-Feb-06 03:14:03 LOG3 track_source: Calling 'track_source AGES1367_p2_023 127.87 4.7253587690 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-06 03:14:03 START begin_task: Starting task 'sending tracking commands' 2012-Feb-06 03:14:03 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_023} INFO {Slewing to source 'AGES1367_p2_023' ...} 2012-Feb-06 03:14:03 INFO1 track_source: Starting to track AGES1367_p2_023 2012-Feb-06 03:14:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_023" 2012-Feb-06 03:14:03 LOG3 vw_send: To DATATAKING: set ra 127.87 2012-Feb-06 03:14:03 LOG3 vw_send: To DATATAKING: set dec 4.7253587690 2012-Feb-06 03:14:03 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-06 03:14:03 LOG3 vw_send: To DATATAKING: pnt tr 127.87 4.7253587690 -CF 2012-Feb-06 03:14:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 03:14:03 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-06 03:14:03 LOG5 finish_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-06 03:14:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-06 03:14:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-06 03:14:03 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 LOG1 fixed_driftmap: Parameters: HA = +00:16:00.0 Start = 11:50:40.1 LST = 11:50:22.6 diff = 17.4 secs 2012-Feb-06 03:14:03 INFO2 fixed_driftmap: Waiting 15.4 seconds for RA 11:34:40 2012-Feb-06 03:14:03 INFO2 lstwait: Waiting for 15.4 secs from LST 11:50:23 to LST 11:50:38 ... 2012-Feb-06 03:14:03 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.393349365977976 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-06 03:14:03 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-06 03:14:03 LOG5 begin_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_023" 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: set ra 127.87 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: set dec 4.7253587690 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: vw% 127.87 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: vw% 4.7253587690 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: pnt tr 127.87 4.7253587690 -CF 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-06 03:14:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-06 03:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.086 (still bad) 2012-Feb-06 03:14:18 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-06 03:14:18 LOG5 end_task: Level: (3) ID = <10358> Status = 0 0 0 0 ok 2012-Feb-06 03:14:18 LOG4 lstwait: Finished waiting 0.61 seconds late 2012-Feb-06 03:14:18 INFO3 lstwait: Finished waiting 2012-Feb-06 03:14:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-06 03:14:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-06 03:14:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-06 03:14:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-06 03:14:18 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-06 03:14:18 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-06 03:14:18 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2012-Feb-06 03:14:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-06 03:14:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_023 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: patternid=203700067 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: scanid=203700067 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456308216.0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306308216.0 2012-Feb-06 03:14:18 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-06 03:14:18 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-06 03:14:19 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p2_023:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203700067:scanid=203700067:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456308216.0:topobfreqhz=1306308216.0:filetype=1 2012-Feb-06 03:14:19 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-06 03:14:19 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2012-Feb-06 03:14:19 LOG4 from_mock: From MOCK: psetok 2012-Feb-06 03:14:19 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-06 03:14:19 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2012-Feb-06 03:14:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-06 03:14:19 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-06 03:14:19 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-06 03:14:19 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-06 03:14:19 LOG5 begin_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2012-Feb-06 03:14:19 LOG4 from_mock: From MOCK: starok 2012-Feb-06 03:14:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-06 03:14:19 LOG5 end_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2012-Feb-06 03:14:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-06 03:14:19 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203700067 2012-Feb-06 03:14:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-06 03:14:19 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2012-Feb-06 03:14:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-06 03:14:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-06 03:14:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-06 03:14:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-06 03:14:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26060.00 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.308216 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1139.575192 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 947.778176 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 894.615216 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 892.658304 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2012-Feb-06 03:14:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.308216 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2012-Feb-06 03:14:21 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-06 03:14:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-06 03:14:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-06 03:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2012-Feb-06 03:14:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:14:24.01 2012-Feb-06 03:14:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328512464.01 Mon Feb 6 03:14:24 2012 2012-Feb-06 03:14:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-06 03:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2012-Feb-06 03:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.087 (still bad) 2012-Feb-06 03:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.085 (still bad) 2012-Feb-06 03:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.086 (still bad) 2012-Feb-06 03:14:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 03:14:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.033 1.044 0.900 2012-Feb-06 03:14:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.081 0.968 1.019 2012-Feb-06 03:14:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.089 1.078 1.026 2012-Feb-06 03:14:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.024 1.077 0.025 2012-Feb-06 03:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.086 (still bad) 2012-Feb-06 03:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.086 (still bad) 2012-Feb-06 03:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2012-Feb-06 03:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.086 (still bad) 2012-Feb-06 03:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.089 (still bad) 2012-Feb-06 03:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.084 (still bad) 2012-Feb-06 03:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.083 (still bad) 2012-Feb-06 03:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.082 (still bad) 2012-Feb-06 03:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.084 (still bad) 2012-Feb-06 03:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2012-Feb-06 03:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.084 (still bad) 2012-Feb-06 03:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.084 (still bad) 2012-Feb-06 03:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.085 (still bad) 2012-Feb-06 03:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.083 (still bad) 2012-Feb-06 03:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2012-Feb-06 03:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.085 (still bad) 2012-Feb-06 03:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.085 (still bad) 2012-Feb-06 03:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2012-Feb-06 03:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2012-Feb-06 03:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.085 (still bad) 2012-Feb-06 03:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2012-Feb-06 03:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.088 (still bad) 2012-Feb-06 03:15:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-06 03:15:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.032 1.043 0.900 2012-Feb-06 03:15:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.076 0.964 1.015 2012-Feb-06 03:15:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.086 1.073 1.021 2012-Feb-06 03:15:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.023 1.071 0.023 2012-Feb-06 03:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.086 (still bad) 2012-Feb-06 03:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.084 (still bad) 2012-Feb-06 03:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.084 (still bad) 2012-Feb-06 03:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.087 (still bad) 2012-Feb-06 03:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.087 (still bad) 2012-Feb-06 03:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.084 (still bad) 2012-Feb-06 03:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.086 (still bad) 2012-Feb-06 03:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.084 (still bad) 2012-Feb-06 03:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.088 (still bad) 2012-Feb-06 03:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.084 (still bad) 2012-Feb-06 03:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.086 (still bad) 2012-Feb-06 03:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.090 (still bad) 2012-Feb-06 03:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.092 (still bad) 2012-Feb-06 03:16:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-06 03:16:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.035 1.043 0.902 2012-Feb-06 03:16:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.075 1.079 0.963 1.017 2012-Feb-06 03:16:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 1.098 1.069 1.020 2012-Feb-06 03:16:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.024 1.072 0.024 2012-Feb-06 03:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2012-Feb-06 03:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-06 03:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2012-Feb-06 03:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-06 03:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-06 03:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-06 03:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Feb-06 03:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.090 (still bad) 2012-Feb-06 03:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.087 (still bad) 2012-Feb-06 03:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.088 (still bad) 2012-Feb-06 03:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.084 (still bad) 2012-Feb-06 03:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.086 (still bad) 2012-Feb-06 03:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.086 (still bad) 2012-Feb-06 03:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2012-Feb-06 03:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2012-Feb-06 03:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2012-Feb-06 03:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.086 (still bad) 2012-Feb-06 03:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2012-Feb-06 03:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 03:17:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 1.030 1.046 0.903 2012-Feb-06 03:17:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.080 0.964 1.016 2012-Feb-06 03:17:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.087 1.071 1.023 2012-Feb-06 03:17:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.025 1.075 0.026 2012-Feb-06 03:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.088 (still bad) 2012-Feb-06 03:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.087 (still bad) 2012-Feb-06 03:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.084 (still bad) 2012-Feb-06 03:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.086 (still bad) 2012-Feb-06 03:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.085 (still bad) 2012-Feb-06 03:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 03:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 03:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.086 (still bad) 2012-Feb-06 03:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.085 (still bad) 2012-Feb-06 03:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.087 (still bad) 2012-Feb-06 03:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.090 (still bad) 2012-Feb-06 03:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2012-Feb-06 03:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.089 (still bad) 2012-Feb-06 03:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.088 (still bad) 2012-Feb-06 03:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.084 (still bad) 2012-Feb-06 03:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.083 (still bad) 2012-Feb-06 03:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.089 (still bad) 2012-Feb-06 03:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:18:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-06 03:18:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.032 1.046 0.901 2012-Feb-06 03:18:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.081 0.963 1.017 2012-Feb-06 03:18:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.084 1.069 1.020 2012-Feb-06 03:18:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.025 1.074 0.025 2012-Feb-06 03:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.084 (still bad) 2012-Feb-06 03:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.091 (still bad) 2012-Feb-06 03:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.084 (still bad) 2012-Feb-06 03:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.084 (still bad) 2012-Feb-06 03:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.087 (still bad) 2012-Feb-06 03:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.085 (still bad) 2012-Feb-06 03:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.091 (still bad) 2012-Feb-06 03:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.085 (still bad) 2012-Feb-06 03:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.088 (still bad) 2012-Feb-06 03:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Feb-06 03:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.088 (still bad) 2012-Feb-06 03:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.087 (still bad) 2012-Feb-06 03:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.089 (still bad) 2012-Feb-06 03:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.086 (still bad) 2012-Feb-06 03:1