2012-Feb-03 01:08:25 BEGIN executive: CIMA executive starting ... 2012-Feb-03 01:08:26 NOTE executive: STARTING NEW CIMA SESSION 2012-Feb-03 01:08:26 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2012-Feb-03 01:08:26 INFO4 executive: This is an ON-LINE session 2012-Feb-03 01:08:26 INFO4 executive: This is a LOCAL session 2012-Feb-03 01:08:26 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Feb-03 01:08:26 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'JM' 2012-Feb-03 01:08:26 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20120203' 2012-Feb-03 01:08:26 LOG2 log_preferences: Currently applied preferences: 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(dailylog) = daily 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(offlinelog) = write 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(logcolours) = full 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(displaylevel) = INFO1 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(displayformat) = short 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(logformat) = new 2012-Feb-03 01:08:26 LOG2 log_preferences: prefs(fontsize) = 4 2012-Feb-03 01:08:26 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Feb-03 01:08:26 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Feb-03 01:08:26 ALERT executive: CIMA executive ready 2012-Feb-03 01:08:28 NOTE frontend: CIMA frontend ready 2012-Feb-03 01:08:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:08:28 LOG4 got_cormsg: From DATATAKING: setup 2012-Feb-03 01:08:31 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Feb-03 01:08:31 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2012-Feb-03 01:08:31 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Feb-03 01:08:31 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2012-Feb-03 01:08:31 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-03 01:08:31 NOTE select_receiver: Starting to select receiver ALFA 2012-Feb-03 01:08:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Feb-03 01:08:31 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Feb-03 01:08:31 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Feb-03 01:08:31 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Feb-03 01:08:31 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Feb-03 01:08:31 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-03 01:08:31 DONE finish_task: DONE finished selecting: receiver ALFA 2012-Feb-03 01:08:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 01:08:31 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Feb-03 01:08:31 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2012-Feb-03 01:08:33 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: vw% io 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: tape stat 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2012-Feb-03 01:08:33 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Feb-03 01:08:33 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:08:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:08:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:10:22 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 63 - 79) 2012-Feb-03 01:10:22 INFO4 CIMA-load_command_file: Loaded command file '120203.cmd' 2012-Feb-03 01:11:13 INFO1 CIMA-run_command_file: Transferring command file '120203.cmd' to executive ... 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGESLEO_p1_043) < 093840 THEN} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=286.76 alfaangle=85.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_043 ra=103500.00 dec=134500.00} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGESLEO_p1_051) < 100209 THEN} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=299.96 alfaangle=72.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_051 ra=103500.00 dec=133300.00} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2012-Feb-03 01:11:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES1367_p2_005) < 103139 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=254.77 alfaangle=-59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_005 ra=113400.00 dec=214400.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES1367_p2_007) < 105508 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=249.02 alfaangle=-50.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_007 ra=113400.00 dec=214100.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES1367_p2_009) < 111839 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=228.86 alfaangle=-26.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_009 ra=113400.00 dec=213800.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES1367_p2_011) < 114439 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=143.76 alfaangle=52.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_011 ra=113400.00 dec=213500.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 51 {IF LSTSLEW(AGES1367_p2_013) < 120809 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 52 {FIXEDDRIFT az=112.93 alfaangle=86.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_013 ra=113400.00 dec=213200.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 55 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 58 {IF LSTSLEW(AGES1367_p2_015) < 123139 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 59 {FIXEDDRIFT az=105.22 alfaangle=-82.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_015 ra=113400.00 dec=212900.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 62 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 69 {LOAD togs_cima31.conf} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 70 {TRACKCURPOS} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 71 {ALFAANGLE 19} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 75 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 83 {LOAD ages_mock.conf} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 84 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 85 {CATALOG AGESFull.cat} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 88 {IF LSTSLEW(AGES5523_p1_097) < 131933 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 89 {FIXEDDRIFT az=222.87 alfaangle=-24.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_097 ra=140500.00 dec=285600.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 92 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 95 {IF LSTSLEW(AGES5523_p1_017) < 134232 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 96 {FIXEDDRIFT az=201.52 alfaangle=-1.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_017 ra=140500.00 dec=305600.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 99 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 102 {IF LSTSLEW(AGES5523_p1_019) < 140532 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 103 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_019 ra=140500.00 dec=305300.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 106 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 109 {IF LSTSLEW(AGES5523_p1_021) < 142832 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 110 {FIXEDDRIFT az=158.31 alfaangle=40.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_021 ra=140500.00 dec=305000.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 113 {ENDIF} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 116 {IF LSTSLEW(AGES5523_p1_093) < 145133 THEN} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 117 {FIXEDDRIFT az=137.41 alfaangle=61.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_093 ra=140500.00 dec=290200.00} 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 120 {ENDIF} 2012-Feb-03 01:11:14 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Feb-03 01:11:14 LOG4 exec_msg: From OBSERVER: run_command_file 120203.cmd 1 1 49 2012-Feb-03 01:11:14 LOG4 run_command_file: Calling 'run_command_file 120203.cmd 1 1 49' 2012-Feb-03 01:11:14 BEGIN begin_task: Starting task 'running command file '120203.cmd'' 2012-Feb-03 01:11:14 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Feb-03 01:11:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '120203.cmd' ...} 2012-Feb-03 01:11:14 NOTE run_command_file: Starting execution of command file '120203.cmd' from line 1 2012-Feb-03 01:11:14 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2012-Feb-03 01:11:14 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 01:11:15 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Feb-03 01:11:15 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Feb-03 01:11:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Feb-03 01:11:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2012-Feb-03 01:11:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 01:11:17 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Feb-03 01:11:17 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-03 01:11:17 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Feb-03 01:11:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Feb-03 01:11:18 INFO1 config_iflo: Selecting receiver ALFA 2012-Feb-03 01:11:18 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2012-Feb-03 01:11:18 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Feb-03 01:11:18 START begin_task: Starting task 'selecting receiver ALFA' 2012-Feb-03 01:11:18 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 NOTE select_receiver: Starting to select receiver ALFA 2012-Feb-03 01:11:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Feb-03 01:11:18 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Feb-03 01:11:18 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Feb-03 01:11:18 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 INFO2 finish_task: DONE finished selecting: receiver ALFA 2012-Feb-03 01:11:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:11:18 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Feb-03 01:11:18 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 START begin_task: Starting task 'waiting for receiver ALFA' 2012-Feb-03 01:11:18 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2012-Feb-03 01:11:18 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Feb-03 01:11:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Feb-03 01:11:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:11:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:11:18 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:11:18 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:11:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:11:18 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:11:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: alfafb 1 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Feb-03 01:11:18 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Feb-03 01:11:18 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Feb-03 01:11:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Feb-03 01:11:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:11:18 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Feb-03 01:11:18 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: alfafb 1 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Feb-03 01:11:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:11:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:11:34 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Feb-03 01:11:34 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Feb-03 01:11:34 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Feb-03 01:11:34 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 DONE finish_task: DONE finished configuration: IF/LO path 2012-Feb-03 01:11:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 01:11:34 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Feb-03 01:11:34 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Feb-03 01:11:34 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Feb-03 01:11:34 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Feb-03 01:11:34 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-03 01:11:34 START begin_task: Starting task 'selecting calibration port' 2012-Feb-03 01:11:34 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-03 01:11:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-03 01:11:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:11:34 START begin_task: Starting task 'waiting on calport' 2012-Feb-03 01:11:34 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:34 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:11:34 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-03 01:11:34 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Feb-03 01:11:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-03 01:11:34 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-03 01:11:34 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 01:11:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 01:11:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:11:35 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:11:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 01:11:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:11:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:11:35 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-03 01:11:35 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-03 01:11:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:11:35 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:11:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 01:11:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:11:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:11:35 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 01:11:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 01:11:35 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Feb-03 01:11:35 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Feb-03 01:11:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 01:11:35 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Feb-03 01:11:35 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2012-Feb-03 01:11:35 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2012-Feb-03 01:11:35 INFO1 config_mock: Starting to configure the Mock spectrometer 2012-Feb-03 01:11:35 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-03 01:11:35 START begin_task: Starting task 'selecting calibration port' 2012-Feb-03 01:11:35 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-03 01:11:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-03 01:11:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:11:35 START begin_task: Starting task 'waiting on calport' 2012-Feb-03 01:11:35 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-03 01:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 01:11:35 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-03 01:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Feb-03 01:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Feb-03 01:11:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:11:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:36 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:11:36 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-03 01:11:36 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-03 01:11:36 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-03 01:11:36 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 01:11:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 01:11:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:11:36 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:11:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 01:11:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 01:11:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:11:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:11:36 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-03 01:11:36 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-03 01:11:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:11:36 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:11:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 01:11:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:11:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:11:36 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2012-Feb-03 01:11:36 LOG3 socket_wait: To MOCK: NOP 2012-Feb-03 01:11:36 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2012-Feb-03 01:11:36 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Feb-03 01:11:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0000.fits 2012-Feb-03 01:11:36 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20120203.a2048.0000.fits} 2012-Feb-03 01:11:37 ALERT got_mock_message: Mock spectrometer restarting 2012-Feb-03 01:11:37 LOG4 from_mock: From MOCK: nop ok 2012-Feb-03 01:11:37 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2012-Feb-03 01:11:37 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Feb-03 01:11:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2012-Feb-03 01:11:37 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2012-Feb-03 01:11:37 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2012-Feb-03 01:11:37 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2012-Feb-03 01:11:37 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2012-Feb-03 01:11:37 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Feb-03 01:11:38 LOG4 from_mock: From MOCK: confok 2012-Feb-03 01:11:38 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2012-Feb-03 01:11:38 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Feb-03 01:11:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2012-Feb-03 01:11:38 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2012-Feb-03 01:11:38 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2012-Feb-03 01:11:38 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2012-Feb-03 01:11:38 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-03 01:11:38 LOG4 from_mock: From MOCK: confok 2012-Feb-03 01:11:38 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2012-Feb-03 01:11:38 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-03 01:11:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2012-Feb-03 01:11:38 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2012-Feb-03 01:11:38 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-03 01:11:38 DONE finish_task: DONE finished configuring: the Mock spectrometer 2012-Feb-03 01:11:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 01:11:39 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2012-Feb-03 01:11:39 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-03 01:11:39 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Feb-03 01:11:39 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2012-Feb-03 01:11:39 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2012-Feb-03 01:11:39 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Feb-03 01:11:39 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGESLEO_p1_043) < 093840 THEN' 2012-Feb-03 01:11:40 LOG3 is_if_valid: Current source data: up 285.8 15.1 UP - - 139 1.3 2012-Feb-03 01:11:40 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESLEO_p1_043) < 093840 2012-Feb-03 01:11:40 INFO5 is_if_valid: Condition parsed as: 9.6185766666666659 < 9.6444444444444439 2012-Feb-03 01:11:40 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=286.76 alfaangle=85.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_043 ra=103500.00 dec=134500.00' 2012-Feb-03 01:11:41 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 01:11:41 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 01:11:41 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 286.76 85.3 hcorcal 5 tracking no off lcorcal first 1 AGESLEO_p1_043 103500.00 134500.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:11:41 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 01:11:41 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-03 01:11:41 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AUDSGAL2577' 2012-Feb-03 01:11:41 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 01:11:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESLEO_p1_043} 2012-Feb-03 01:11:41 INFO3 fixed_driftmap: Sending telescope to Az = 286.76 and ZA = 14.46 2012-Feb-03 01:11:41 LOG3 track_source: Calling 'track_source AGESLEO_p1_043 286.76 14.4629947109 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:11:41 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:11:41 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-03 01:11:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_043} INFO {Slewing to source 'AGESLEO_p1_043' ...} 2012-Feb-03 01:11:41 INFO1 track_source: Starting to track AGESLEO_p1_043 2012-Feb-03 01:11:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_043" 2012-Feb-03 01:11:41 LOG3 vw_send: To DATATAKING: set ra 286.76 2012-Feb-03 01:11:41 LOG3 vw_send: To DATATAKING: set dec 14.4629947109 2012-Feb-03 01:11:41 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:11:41 LOG3 vw_send: To DATATAKING: pnt tr 286.76 14.4629947109 -CF 2012-Feb-03 01:11:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:11:41 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:11:41 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-03 01:11:41 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:11:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:11:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:11:41 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-03 01:11:41 START begin_task: Starting task 'rotate ALFA to +85.3 degrees' 2012-Feb-03 01:11:41 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-03 01:11:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +85.3 degrees ...} 2012-Feb-03 01:11:41 INFO2 rotate_alfa: ALFA commanded to +85.3 degrees 2012-Feb-03 01:11:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION 85.3 REPLY 2012-Feb-03 01:11:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 01:11:41 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 01:11:41 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Feb-03 01:11:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_043" 2012-Feb-03 01:11:41 LOG4 got_cormsg: From DATATAKING: set ra 286.76 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: set dec 14.4629947109 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: vw% 286.76 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: vw% 14.4629947109 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: pnt tr 286.76 14.4629947109 -CF 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:11:42 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:11:47 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 01:11:47 INFO3 alfa_motor: ALFA rotator in-position +85.30 degrees 2012-Feb-03 01:11:47 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 01:11:47 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Feb-03 01:11:47 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:11:47 STOP finish_task: Finishing task 'rotate ALFA to +85.3 degrees' 2012-Feb-03 01:11:47 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-03 01:11:47 INFO2 finish_task: DONE finished configuration: rotating ALFA to +85.3 degrees 2012-Feb-03 01:11:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:11:47 STOP end_task: Finishing task 'rotate ALFA to +85.3 degrees' with status 'OK' 2012-Feb-03 01:11:47 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-03 01:11:47 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 01:11:47 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-03 01:11:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 01:11:48 LOG3 waittrk: Start waittrk 5 2012-Feb-03 01:11:48 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 01:11:48 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-03 01:11:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 01:11:53 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-03 01:11:53 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 01:11:53 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Feb-03 01:13:13 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 01:13:13 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:13:14 INFO2 waittrk: Now tracking AGESLEO_p1_043 2012-Feb-03 01:13:14 LOG4 waittrk: Current telescope position: Az = 286.35 ZA = 14.46 2012-Feb-03 01:13:14 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 01:13:14 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 01:13:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:13:14 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 01:13:14 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 01:13:14 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 01:13:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 01:13:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:13:14 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 01:13:14 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 01:13:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:13:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:14 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:13:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 01:13:14 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 01:13:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:13:14 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 01:13:14 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:13:14 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:14 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:13:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:13:14 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:13:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 01:13:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:13:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:13:14 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:13:14 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:13:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:13:14 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:13:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:13:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 01:13:14 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-03 01:13:14 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 01:13:14 INFO2 astwait: Waiting for 16 seconds from 05:13:14 to 05:13:30 UTC ... 2012-Feb-03 01:13:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 01:13:14 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 01:13:14 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 01:13:30 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 INFO3 astwait: Finished waiting 2012-Feb-03 01:13:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:13:30 LOG5 dopset_later: Calling 'dopset_later 60.900542497052967' 2012-Feb-03 01:13:30 INFO3 dopset_later: Setting Doppler correction for 01:14:30 (60.9 seconds from now) 2012-Feb-03 01:13:30 LOG5 antvel: Calling 'antvel 286.760000 14.462995 F Heliocentric 60.900542497052967' 2012-Feb-03 01:13:30 LOG2 antvel: Transforming current Az = 286.76 ZA = 14.46 to apparent RA = 10:35:40.8 Dec = +13:40:58.5 2012-Feb-03 01:13:30 LOG2 antvel: Parameters to Doppler: Heliocentric 18870 2012 34 0.0 2012-Feb-03 01:13:30 INFO5 antvel: Computed antenna velocity: -11.44036 km/s 2012-Feb-03 01:13:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-11.4403554524 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 01:13:30 INFO4 dopset_gen: New sky frequencies: 1381.296140 1381.296140 1381.296140 1381.296140 1381.296140 1381.296140 1381.296140 1381.296140 1381.296140 2012-Feb-03 01:13:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.296140 sky0=1381.296140 sky1=1381.296140 sky2=1381.296140 sky3=1381.296140 sky4=1381.296140 sky5=1381.296140 sky6=1381.296140 sky7=1381.296140 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 01:13:30 LOG2 dopset_gen: Result from 'sky2syn': 1631.296140 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631296140.0} 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 01:13:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 01:13:30 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 01:13:30 INFO5 fixed_driftmap: Tracking J2000 position: RA = 10:34:04.2 Dec = +13:44:44.2 2012-Feb-03 01:13:30 LOG3 track_source: Calling 'track_source AGESLEO_p1_043 103404.2 134444.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:13:30 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:13:30 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_043} INFO {Slewing to source 'AGESLEO_p1_043' ...} 2012-Feb-03 01:13:30 INFO1 track_source: Starting to track AGESLEO_p1_043 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_043" 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: set ra 103404.2 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: set dec 134444.2 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: pnt tr 103404.2 134444.2 -CJ 2012-Feb-03 01:13:30 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:13:30 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:13:30 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:13:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:13:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:13:30 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 01:13:30 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 01:13:30 LOG3 waittrk: Start waittrk 5 2012-Feb-03 01:13:30 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 01:13:30 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631296140.0} 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_043" 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: set ra 103404.2 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: set dec 134444.2 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: pnt tr 103404.2 134444.2 -CJ 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: 103404.2 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: vw% 134444.2 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:13:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:35 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 01:13:35 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Feb-03 01:13:35 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 01:13:35 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2012-Feb-03 01:13:37 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 01:13:37 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2012-Feb-03 01:13:37 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:13:37 INFO2 waittrk: Now tracking AGESLEO_p1_043 2012-Feb-03 01:13:37 LOG4 waittrk: Current telescope position: Az = 286.39 ZA = 14.45 2012-Feb-03 01:13:37 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 01:13:37 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-03 01:13:37 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 01:13:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:13:37 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 01:13:37 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-03 01:13:37 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 01:13:37 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-03 01:13:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 01:13:37 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 01:13:37 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 01:13:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 01:13:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:13:37 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 01:13:37 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2012-Feb-03 01:13:37 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 01:13:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:40 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:13:40 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 01:13:40 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2012-Feb-03 01:13:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 01:13:40 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 01:13:40 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-03 01:13:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 01:13:40 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:13:40 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:13:40 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:13:40 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:13:40 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 01:13:40 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2012-Feb-03 01:13:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 01:13:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:41 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 3 dB --- beam 1: 7 6 dB 2012-Feb-03 01:13:41 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-03 01:13:41 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-03 01:13:41 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-03 01:13:41 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 01:13:41 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 01:13:41 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2012-Feb-03 01:13:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.032 0.763 ALFA beam 1: 1.102 0.922 2012-Feb-03 01:13:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.926 0.949 ALFA beam 3: 0.999 1.060 2012-Feb-03 01:13:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.771 1.089 ALFA beam 5: 1.113 1.070 2012-Feb-03 01:13:41 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.997 0.014 ALFA beam 7: 1.093 0.014 2012-Feb-03 01:13:41 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 01:13:41 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-03 01:13:41 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 01:13:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:13:41 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 01:13:41 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-03 01:13:41 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 01:13:41 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-03 01:13:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 01:13:41 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 01:13:41 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 01:13:41 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 01:13:41 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2012-Feb-03 01:13:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:13:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.763 1.102 0.922 2012-Feb-03 01:13:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.949 0.999 1.060 2012-Feb-03 01:13:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.089 1.113 1.070 2012-Feb-03 01:13:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.997 0.014 1.093 0.014 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.6 26.9 B 32.5 32.7 mn:A 0.2 0.1 B -0.2 -0.3 gn: 11 13 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.8 30.4 B 32.6 34.6 mn:A 0.0 -0.6 B -0.5 0.1 gn: 12 14 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.0 28.0 B 33.3 28.9 mn:A 0.3 0.6 B 0.1 -0.0 gn: 7 11 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.8 27.4 B 31.6 31.6 mn:A -0.5 -0.3 B 0.6 0.4 gn: 8 10 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.2 28.3 B 28.0 29.3 mn:A 0.0 -0.3 B 0.4 0.0 gn: 10 11 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.0 31.3 B 32.4 30.1 mn:A 0.3 -0.1 B -0.0 0.2 gn: 11 12 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.6 28.4 B 30.7 27.4 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 12 12 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.4 29.7 B 26.9 28.1 mn:A -0.2 0.4 B 0.3 0.2 gn: 12 11 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.5 B 28.5 28.6 mn:A -0.3 -0.4 B -0.5 0.0 gn: 13 11 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.8 28.8 B 31.3 30.2 mn:A 0.1 0.1 B -0.3 0.3 gn: 16 13 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.7 30.6 B 30.0 30.0 mn:A 0.7 0.7 B 0.1 0.6 gn: 13 11 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.0 28.8 B 30.7 30.5 mn:A -0.3 0.2 B -0.1 0.2 gn: 12 11 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.1 28.5 B 14.1 14.5 mn:A -0.4 0.3 B 0.5 -0.3 gn: 13 31 2012-Feb-03 01:13:47 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.0 29.0 B 11.1 10.8 mn:A 0.6 0.4 B 0.2 0.3 gn: 14 31 2012-Feb-03 01:13:47 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 01:13:47 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 01:13:48 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 01:13:48 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 01:13:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 01:13:48 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 01:13:48 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 01:13:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 01:13:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 01:13:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 01:13:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 01:13:48 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20120203.a2048.0000.fits' is empty! 2012-Feb-03 01:13:48 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 01:13:48 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 01:13:48 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 01:13:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 01:13:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:13:48 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 01:13:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 01:13:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:13:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:48 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 01:13:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:13:48 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 01:13:48 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:13:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:13:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 01:13:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:13:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:13:48 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:13:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 01:13:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 01:13:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 01:13:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:13:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 01:13:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:13:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:13:48 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 01:13:48 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 01:13:48 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2012-Feb-03 01:13:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 01:13:48 LOG5 log_alfabeam: Parameters: 10.567833333333333 13.745611111111113 9.633120 2012.0932272416153 85.299995 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 0 10.567833333333331 13.745611111111115 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 1 10.565744067308515 13.837181077206468 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 2 10.560828965475912 13.776322925793249 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 3 10.562889989629753 13.684810147919368 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 4 10.569881254542443 13.653593316091296 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 5 10.574838254590379 13.714957379126730 2012-Feb-03 01:13:48 LOG4 log_alfabeam: ALFABEAM 6 10.572761924763014 13.807033336792367 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_043 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: patternid=203400037 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: scanid=203400037 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456296140.0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306296140.0 2012-Feb-03 01:13:49 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 01:13:49 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 01:13:49 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGESLEO_p1_043:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400037:scanid=203400037:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456296140.0:topobfreqhz=1306296140.0:filetype=1 2012-Feb-03 01:13:49 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 01:13:49 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2012-Feb-03 01:13:49 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 01:13:49 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 01:13:49 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2012-Feb-03 01:13:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 01:13:49 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 01:13:49 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 01:13:49 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 01:13:49 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2012-Feb-03 01:13:49 LOG4 from_mock: From MOCK: starok 2012-Feb-03 01:13:49 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 01:13:49 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2012-Feb-03 01:13:49 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 01:13:49 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400037 2012-Feb-03 01:13:49 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 01:13:49 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2012-Feb-03 01:13:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 01:13:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 01:13:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18830.00 2012-Feb-03 01:13:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 01:13:49 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 01:13:51 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 01:13:51 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 01:13:51 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:51 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:13:55 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:13:55.02 2012-Feb-03 01:13:55 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328246035.02 Fri Feb 3 01:13:55 2012 2012-Feb-03 01:13:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.296140 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 01:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.561 (still bad) 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 01:13:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 01:13:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 01:14:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 01:14:01 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 01:14:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 01:14:01 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 01:14:01 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 01:14:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 01:14:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 01:14:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:14:01 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:14:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 01:14:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:14:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:14:01 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 01:14:01 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 01:14:01 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 01:14:01 LOG5 log_alfabeam: Parameters: 10.567833333333333 13.745611111111113 9.636462 2012.0932276218723 85.299995 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 0 10.567833333333331 13.745611111111119 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 1 10.565750109809253 13.837209866519729 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 2 10.560831019012884 13.776422215892648 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 3 10.562885910585081 13.684881206861123 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 4 10.569875055218329 13.653563645124150 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 5 10.574836210424628 13.714858420387452 2012-Feb-03 01:14:01 LOG4 log_alfabeam: ALFABEAM 6 10.572765988692655 13.806964615741281 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_043 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: patternid=203400037 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: scanid=203400038 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456296140.0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306296140.0 2012-Feb-03 01:14:01 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 01:14:01 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 01:14:01 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGESLEO_p1_043:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400037:scanid=203400038:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456296140.0:topobfreqhz=1306296140.0:filetype=1 2012-Feb-03 01:14:01 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 01:14:01 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 01:14:01 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 01:14:01 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 01:14:01 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 01:14:01 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 01:14:01 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 01:14:01 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG4 from_mock: From MOCK: starok 2012-Feb-03 01:14:01 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 01:14:01 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 01:14:01 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400038 2012-Feb-03 01:14:01 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 01:14:01 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2012-Feb-03 01:14:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 01:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.563 (still bad) 2012-Feb-03 01:14:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 01:14:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18842.00 2012-Feb-03 01:14:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 01:14:02 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 01:14:04 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 01:14:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 01:14:04 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:04 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:14:07 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:14:07.01 2012-Feb-03 01:14:07 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328246047.01 Fri Feb 3 01:14:07 2012 2012-Feb-03 01:14:07 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.296140 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 01:14:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 01:14:07 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 01:14:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 01:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.563 (still bad) 2012-Feb-03 01:14:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 01:14:13 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 01:14:13 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 01:14:13 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 01:14:13 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 01:14:13 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 01:14:13 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 01:14:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:14:13 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 01:14:13 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 01:14:13 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 286.76 and ZA = 14.46 2012-Feb-03 01:14:13 LOG3 track_source: Calling 'track_source AGESLEO_p1_043 286.76 14.4629947109 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:14:13 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:14:13 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_043} INFO {Slewing to source 'AGESLEO_p1_043' ...} 2012-Feb-03 01:14:13 INFO1 track_source: Starting to track AGESLEO_p1_043 2012-Feb-03 01:14:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_043" 2012-Feb-03 01:14:13 LOG3 vw_send: To DATATAKING: set ra 286.76 2012-Feb-03 01:14:13 LOG3 vw_send: To DATATAKING: set dec 14.4629947109 2012-Feb-03 01:14:13 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:14:13 LOG3 vw_send: To DATATAKING: pnt tr 286.76 14.4629947109 -CF 2012-Feb-03 01:14:13 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:14:13 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:14:13 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:14:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:14:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:14:13 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 LOG1 fixed_driftmap: Parameters: HA = -00:56:59.7 Start = 09:38:41.2 LST = 09:38:23.3 diff = 18.0 secs 2012-Feb-03 01:14:13 INFO2 fixed_driftmap: Waiting 16 seconds for RA 10:35:41 2012-Feb-03 01:14:13 INFO2 lstwait: Waiting for 15.9 secs from LST 09:38:23 to LST 09:38:39 ... 2012-Feb-03 01:14:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.906530499932998 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 01:14:13 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 01:14:13 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_043" 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: set ra 286.76 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: set dec 14.4629947109 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: vw% 286.76 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: vw% 14.4629947109 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: pnt tr 286.76 14.4629947109 -CF 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:14:13 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 01:14:29 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 01:14:29 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Feb-03 01:14:29 LOG4 lstwait: Finished waiting 1.10 seconds late 2012-Feb-03 01:14:29 INFO3 lstwait: Finished waiting 2012-Feb-03 01:14:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:14:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 01:14:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 01:14:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 01:14:29 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 01:14:29 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 01:14:29 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Feb-03 01:14:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 01:14:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_043 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: patternid=203400039 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: scanid=203400039 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456296140.0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306296140.0 2012-Feb-03 01:14:29 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 01:14:29 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 01:14:29 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGESLEO_p1_043:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400039:scanid=203400039:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456296140.0:topobfreqhz=1306296140.0:filetype=1 2012-Feb-03 01:14:29 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 01:14:29 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Feb-03 01:14:29 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 01:14:29 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 01:14:29 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Feb-03 01:14:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 01:14:29 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 01:14:29 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 01:14:29 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 01:14:29 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2012-Feb-03 01:14:29 LOG4 from_mock: From MOCK: starok 2012-Feb-03 01:14:29 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 01:14:29 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2012-Feb-03 01:14:29 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 01:14:29 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400039 2012-Feb-03 01:14:30 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 01:14:30 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Feb-03 01:14:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 01:14:30 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 01:14:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 01:14:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 01:14:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18871.00 2012-Feb-03 01:14:31 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 01:14:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2012-Feb-03 01:14:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.296140 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 01:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 01:14:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.296140 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 01:14:34 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:14:34.02 2012-Feb-03 01:14:34 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328246074.02 Fri Feb 3 01:14:34 2012 2012-Feb-03 01:14:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 01:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-03 01:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-03 01:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-03 01:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 01:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 01:14:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:14:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.625 1.109 0.929 2012-Feb-03 01:14:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.959 1.015 1.076 2012-Feb-03 01:14:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.115 1.121 1.077 2012-Feb-03 01:14:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.024 1.100 0.025 2012-Feb-03 01:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-03 01:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 01:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 01:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 01:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 01:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 01:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 01:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 01:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 01:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2012-Feb-03 01:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2012-Feb-03 01:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-03 01:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2012-Feb-03 01:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-03 01:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.128 (still bad) 2012-Feb-03 01:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 01:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 01:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 01:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 01:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 01:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:15:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 01:15:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.725 1.109 0.930 2012-Feb-03 01:15:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.961 1.014 1.077 2012-Feb-03 01:15:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.115 1.119 1.075 2012-Feb-03 01:15:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.025 1.101 0.025 2012-Feb-03 01:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-03 01:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 01:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 01:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 01:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 01:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-03 01:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 01:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 01:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 01:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 01:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-03 01:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 01:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 01:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-03 01:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-03 01:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:16:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 0.667 1.114 0.933 2012-Feb-03 01:16:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.963 1.015 1.078 2012-Feb-03 01:16:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.116 1.123 1.076 2012-Feb-03 01:16:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.024 1.103 0.025 2012-Feb-03 01:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-03 01:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 01:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-03 01:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-03 01:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2012-Feb-03 01:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 01:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.539 (still bad) 2012-Feb-03 01:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.660 (still bad) 2012-Feb-03 01:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 01:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 01:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 01:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-03 01:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 01:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 01:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 01:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.593 (still bad) 2012-Feb-03 01:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-03 01:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 01:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 01:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 01:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-03 01:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:17:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:17:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.047 1.106 0.931 2012-Feb-03 01:17:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.961 1.014 1.076 2012-Feb-03 01:17:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.116 1.118 1.075 2012-Feb-03 01:17:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.024 1.104 0.024 2012-Feb-03 01:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 01:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 01:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.253 (still bad) 2012-Feb-03 01:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 01:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 01:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 01:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 01:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-03 01:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 01:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.266 (still bad) 2012-Feb-03 01:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-03 01:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.624 (still bad) 2012-Feb-03 01:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.652 (still bad) 2012-Feb-03 01:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.159 (still bad) 2012-Feb-03 01:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.420 (still bad) 2012-Feb-03 01:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 01:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.281 (still bad) 2012-Feb-03 01:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.201 (still bad) 2012-Feb-03 01:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.380 (still bad) 2012-Feb-03 01:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.572 (still bad) 2012-Feb-03 01:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.467 (still bad) 2012-Feb-03 01:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:18:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:18:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.658 1.107 0.933 2012-Feb-03 01:18:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.968 1.012 1.076 2012-Feb-03 01:18:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.111 1.120 1.072 2012-Feb-03 01:18:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.024 1.100 0.024 2012-Feb-03 01:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.668 (still bad) 2012-Feb-03 01:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.651 (still bad) 2012-Feb-03 01:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.642 (still bad) 2012-Feb-03 01:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.645 (still bad) 2012-Feb-03 01:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.651 (still bad) 2012-Feb-03 01:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.653 (still bad) 2012-Feb-03 01:19:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:19:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 1.659 1.104 0.929 2012-Feb-03 01:19:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.958 1.015 1.075 2012-Feb-03 01:19:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.113 1.119 1.075 2012-Feb-03 01:19:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.024 1.101 0.025 2012-Feb-03 01:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.673 (still bad) 2012-Feb-03 01:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.651 (still bad) 2012-Feb-03 01:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.627 (still bad) 2012-Feb-03 01:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.674 (still bad) 2012-Feb-03 01:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.643 (still bad) 2012-Feb-03 01:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.678 (still bad) 2012-Feb-03 01:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.671 (still bad) 2012-Feb-03 01:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:20:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:20:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.662 1.106 0.928 2012-Feb-03 01:20:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.962 1.013 1.074 2012-Feb-03 01:20:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.113 1.119 1.074 2012-Feb-03 01:20:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.014 0.024 1.101 0.025 2012-Feb-03 01:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.675 (still bad) 2012-Feb-03 01:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.648 (still bad) 2012-Feb-03 01:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.518 (still bad) 2012-Feb-03 01:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.669 (still bad) 2012-Feb-03 01:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.673 (still bad) 2012-Feb-03 01:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.671 (still bad) 2012-Feb-03 01:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.674 (still bad) 2012-Feb-03 01:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.670 (still bad) 2012-Feb-03 01:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.676 (still bad) 2012-Feb-03 01:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.671 (still bad) 2012-Feb-03 01:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.670 (still bad) 2012-Feb-03 01:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.611 (still bad) 2012-Feb-03 01:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.186 (still bad) 2012-Feb-03 01:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.424 (still bad) 2012-Feb-03 01:21:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:21:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.582 1.107 0.929 2012-Feb-03 01:21:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.960 1.014 1.076 2012-Feb-03 01:21:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.113 1.120 1.077 2012-Feb-03 01:21:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.024 1.102 0.025 2012-Feb-03 01:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.650 (still bad) 2012-Feb-03 01:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.605 (still bad) 2012-Feb-03 01:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.548 (still bad) 2012-Feb-03 01:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.395 (still bad) 2012-Feb-03 01:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.669 (still bad) 2012-Feb-03 01:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.668 (still bad) 2012-Feb-03 01:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.679 (still bad) 2012-Feb-03 01:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.671 (still bad) 2012-Feb-03 01:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.672 (still bad) 2012-Feb-03 01:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.675 (still bad) 2012-Feb-03 01:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.674 (still bad) 2012-Feb-03 01:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.676 (still bad) 2012-Feb-03 01:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.683 (still bad) 2012-Feb-03 01:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.669 (still bad) 2012-Feb-03 01:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.664 (still bad) 2012-Feb-03 01:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.665 (still bad) 2012-Feb-03 01:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.659 (still bad) 2012-Feb-03 01:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.665 (still bad) 2012-Feb-03 01:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.665 (still bad) 2012-Feb-03 01:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.662 (still bad) 2012-Feb-03 01:22:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:22:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.669 1.110 0.933 2012-Feb-03 01:22:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.965 1.017 1.080 2012-Feb-03 01:22:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 1.120 1.126 1.083 2012-Feb-03 01:22:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.020 0.024 1.108 0.024 2012-Feb-03 01:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.663 (still bad) 2012-Feb-03 01:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.665 (still bad) 2012-Feb-03 01:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.663 (still bad) 2012-Feb-03 01:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.661 (still bad) 2012-Feb-03 01:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.666 (still bad) 2012-Feb-03 01:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.674 (still bad) 2012-Feb-03 01:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.665 (still bad) 2012-Feb-03 01:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.663 (still bad) 2012-Feb-03 01:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.667 (still bad) 2012-Feb-03 01:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.669 (still bad) 2012-Feb-03 01:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.678 (still bad) 2012-Feb-03 01:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.672 (still bad) 2012-Feb-03 01:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.671 (still bad) 2012-Feb-03 01:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.672 (still bad) 2012-Feb-03 01:23:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:23:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.662 1.104 0.929 2012-Feb-03 01:23:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.962 1.015 1.079 2012-Feb-03 01:23:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.114 1.117 1.070 2012-Feb-03 01:23:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.018 0.024 1.105 0.024 2012-Feb-03 01:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.675 (still bad) 2012-Feb-03 01:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:24:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:24:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.660 1.106 0.929 2012-Feb-03 01:24:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.960 1.011 1.074 2012-Feb-03 01:24:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.113 1.121 1.073 2012-Feb-03 01:24:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.024 1.100 0.024 2012-Feb-03 01:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.650 (still bad) 2012-Feb-03 01:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.653 (still bad) 2012-Feb-03 01:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.676 (still bad) 2012-Feb-03 01:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.685 (still bad) 2012-Feb-03 01:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.703 (still bad) 2012-Feb-03 01:25:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:25:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.705 1.119 0.942 2012-Feb-03 01:25:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.958 1.013 1.074 2012-Feb-03 01:25:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.114 1.118 1.071 2012-Feb-03 01:25:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.024 1.101 0.024 2012-Feb-03 01:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.719 (still bad) 2012-Feb-03 01:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.715 (still bad) 2012-Feb-03 01:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.719 (still bad) 2012-Feb-03 01:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.724 (still bad) 2012-Feb-03 01:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.699 (still bad) 2012-Feb-03 01:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.684 (still bad) 2012-Feb-03 01:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.678 (still bad) 2012-Feb-03 01:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.668 (still bad) 2012-Feb-03 01:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.667 (still bad) 2012-Feb-03 01:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.652 (still bad) 2012-Feb-03 01:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.672 (still bad) 2012-Feb-03 01:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.674 (still bad) 2012-Feb-03 01:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:27:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:27:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 1.667 1.108 0.932 2012-Feb-03 01:27:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.963 1.014 1.078 2012-Feb-03 01:27:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.114 1.119 1.072 2012-Feb-03 01:27:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.016 0.024 1.104 0.024 2012-Feb-03 01:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.669 (still bad) 2012-Feb-03 01:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.680 (still bad) 2012-Feb-03 01:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.671 (still bad) 2012-Feb-03 01:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.677 (still bad) 2012-Feb-03 01:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.668 (still bad) 2012-Feb-03 01:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.666 (still bad) 2012-Feb-03 01:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.664 (still bad) 2012-Feb-03 01:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.662 (still bad) 2012-Feb-03 01:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.664 (still bad) 2012-Feb-03 01:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.651 (still bad) 2012-Feb-03 01:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:28:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:28:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 1.602 1.110 0.930 2012-Feb-03 01:28:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.957 1.012 1.076 2012-Feb-03 01:28:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.113 1.114 1.072 2012-Feb-03 01:28:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.024 1.102 0.024 2012-Feb-03 01:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.642 (still bad) 2012-Feb-03 01:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.640 (still bad) 2012-Feb-03 01:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.636 (still bad) 2012-Feb-03 01:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.640 (still bad) 2012-Feb-03 01:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.634 (still bad) 2012-Feb-03 01:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.650 (still bad) 2012-Feb-03 01:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.605 (still bad) 2012-Feb-03 01:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.653 (still bad) 2012-Feb-03 01:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.660 (still bad) 2012-Feb-03 01:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.658 (still bad) 2012-Feb-03 01:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.661 (still bad) 2012-Feb-03 01:29:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-03 01:29:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.657 1.106 0.927 2012-Feb-03 01:29:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.960 1.013 1.076 2012-Feb-03 01:29:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.112 1.117 1.073 2012-Feb-03 01:29:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.023 1.101 0.024 2012-Feb-03 01:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.661 (still bad) 2012-Feb-03 01:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.658 (still bad) 2012-Feb-03 01:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.649 (still bad) 2012-Feb-03 01:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.662 (still bad) 2012-Feb-03 01:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.632 (still bad) 2012-Feb-03 01:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.661 (still bad) 2012-Feb-03 01:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.620 (still bad) 2012-Feb-03 01:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.587 (still bad) 2012-Feb-03 01:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.562 (still bad) 2012-Feb-03 01:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.673 (still bad) 2012-Feb-03 01:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.665 (still bad) 2012-Feb-03 01:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.586 (still bad) 2012-Feb-03 01:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.630 (still bad) 2012-Feb-03 01:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.659 (still bad) 2012-Feb-03 01:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.670 (still bad) 2012-Feb-03 01:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.664 (still bad) 2012-Feb-03 01:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.660 (still bad) 2012-Feb-03 01:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.661 (still bad) 2012-Feb-03 01:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.661 (still bad) 2012-Feb-03 01:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.661 (still bad) 2012-Feb-03 01:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.647 (still bad) 2012-Feb-03 01:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:30:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:30:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.664 1.108 0.929 2012-Feb-03 01:30:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.957 1.014 1.078 2012-Feb-03 01:30:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.111 1.115 1.070 2012-Feb-03 01:30:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.024 1.099 0.024 2012-Feb-03 01:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.671 (still bad) 2012-Feb-03 01:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.665 (still bad) 2012-Feb-03 01:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.662 (still bad) 2012-Feb-03 01:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.670 (still bad) 2012-Feb-03 01:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.667 (still bad) 2012-Feb-03 01:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.607 (still bad) 2012-Feb-03 01:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.657 (still bad) 2012-Feb-03 01:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.662 (still bad) 2012-Feb-03 01:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.659 (still bad) 2012-Feb-03 01:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.627 (still bad) 2012-Feb-03 01:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.662 (still bad) 2012-Feb-03 01:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.664 (still bad) 2012-Feb-03 01:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.658 (still bad) 2012-Feb-03 01:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.664 (still bad) 2012-Feb-03 01:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.658 (still bad) 2012-Feb-03 01:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.660 (still bad) 2012-Feb-03 01:31:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 01:31:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.671 1.110 0.934 2012-Feb-03 01:31:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.961 1.017 1.081 2012-Feb-03 01:31:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 1.116 1.119 1.077 2012-Feb-03 01:31:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.024 1.108 0.024 2012-Feb-03 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.658 (still bad) 2012-Feb-03 01:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.673 (still bad) 2012-Feb-03 01:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.663 (still bad) 2012-Feb-03 01:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.664 (still bad) 2012-Feb-03 01:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.653 (still bad) 2012-Feb-03 01:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.659 (still bad) 2012-Feb-03 01:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.653 (still bad) 2012-Feb-03 01:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.666 (still bad) 2012-Feb-03 01:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.664 (still bad) 2012-Feb-03 01:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:32:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-03 01:32:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.668 1.114 0.936 2012-Feb-03 01:32:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.962 1.019 1.082 2012-Feb-03 01:32:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.115 1.121 1.073 2012-Feb-03 01:32:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.023 1.117 0.024 2012-Feb-03 01:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.658 (still bad) 2012-Feb-03 01:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.659 (still bad) 2012-Feb-03 01:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.659 (still bad) 2012-Feb-03 01:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.667 (still bad) 2012-Feb-03 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.652 (still bad) 2012-Feb-03 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.660 (still bad) 2012-Feb-03 01:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.653 (still bad) 2012-Feb-03 01:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.653 (still bad) 2012-Feb-03 01:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.654 (still bad) 2012-Feb-03 01:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.661 (still bad) 2012-Feb-03 01:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.659 (still bad) 2012-Feb-03 01:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.655 (still bad) 2012-Feb-03 01:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.657 (still bad) 2012-Feb-03 01:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.656 (still bad) 2012-Feb-03 01:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.666 (still bad) 2012-Feb-03 01:33:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-03 01:33:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 1.653 1.105 0.930 2012-Feb-03 01:33:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.961 1.015 1.076 2012-Feb-03 01:33:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.115 1.120 1.073 2012-Feb-03 01:33:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.023 1.102 0.024 2012-Feb-03 01:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.652 (still bad) 2012-Feb-03 01:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.651 (still bad) 2012-Feb-03 01:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.653 (still bad) 2012-Feb-03 01:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.650 (still bad) 2012-Feb-03 01:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.652 (still bad) 2012-Feb-03 01:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:33:30 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:33:30.299 (seconds: 5610.299)!} 2012-Feb-03 01:33:30 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:33:30.299 (seconds: 5610.299)! 2012-Feb-03 01:33:31 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 5609.0 to 5610.0! 2012-Feb-03 01:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:33:32 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (5609.0 - 5611.0)! 2012-Feb-03 01:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.659 (still bad) 2012-Feb-03 01:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.653 (still bad) 2012-Feb-03 01:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.659 (still bad) 2012-Feb-03 01:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.669 (still bad) 2012-Feb-03 01:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.660 (still bad) 2012-Feb-03 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.653 (still bad) 2012-Feb-03 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.665 (still bad) 2012-Feb-03 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.660 (still bad) 2012-Feb-03 01:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.656 (still bad) 2012-Feb-03 01:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.663 (still bad) 2012-Feb-03 01:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:34:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-03 01:34:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.652 1.108 0.929 2012-Feb-03 01:34:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.957 1.008 1.074 2012-Feb-03 01:34:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.110 1.116 1.070 2012-Feb-03 01:34:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.023 1.099 0.024 2012-Feb-03 01:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.655 (still bad) 2012-Feb-03 01:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.652 (still bad) 2012-Feb-03 01:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.653 (still bad) 2012-Feb-03 01:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.667 (still bad) 2012-Feb-03 01:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.654 (still bad) 2012-Feb-03 01:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.657 (still bad) 2012-Feb-03 01:34:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 01:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:34:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 01:34:35 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 01:34:35 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 01:34:35 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Feb-03 01:34:35 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 01:34:35 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Feb-03 01:34:35 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 01:34:35 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-03 01:34:35 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 01:34:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 01:34:35 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 01:34:35 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-03 01:34:35 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2012-Feb-03 01:34:35 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGESLEO_p1_051) < 100209 THEN' 2012-Feb-03 01:34:36 LOG3 is_if_valid: Current source data: up 297.5 10.1 UP - - 116 1.8 2012-Feb-03 01:34:36 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESLEO_p1_051) < 100209 2012-Feb-03 01:34:36 INFO5 is_if_valid: Condition parsed as: 10.010178 < 10.035833333333333 2012-Feb-03 01:34:36 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=299.96 alfaangle=72.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_051 ra=103500.00 dec=133300.00' 2012-Feb-03 01:34:37 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 01:34:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 01:34:37 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 299.96 72.8 hcorcal 5 tracking no off lcorcal first 1 AGESLEO_p1_051 103500.00 133300.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:34:37 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 01:34:37 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-03 01:34:37 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESLEO_p1_043' 2012-Feb-03 01:34:37 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 01:34:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESLEO_p1_051} 2012-Feb-03 01:34:37 INFO3 fixed_driftmap: Sending telescope to Az = 299.96 and ZA = 9.41 2012-Feb-03 01:34:37 LOG3 track_source: Calling 'track_source AGESLEO_p1_051 299.96 9.4093862000 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:34:37 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:34:37 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-03 01:34:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_051} INFO {Slewing to source 'AGESLEO_p1_051' ...} 2012-Feb-03 01:34:37 INFO1 track_source: Starting to track AGESLEO_p1_051 2012-Feb-03 01:34:37 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_051" 2012-Feb-03 01:34:37 LOG3 vw_send: To DATATAKING: set ra 299.96 2012-Feb-03 01:34:37 LOG3 vw_send: To DATATAKING: set dec 9.4093862000 2012-Feb-03 01:34:37 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:34:37 LOG3 vw_send: To DATATAKING: pnt tr 299.96 9.4093862000 -CF 2012-Feb-03 01:34:37 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:34:37 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:34:37 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-03 01:34:37 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:34:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:34:37 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:34:37 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-03 01:34:37 START begin_task: Starting task 'rotate ALFA to +72.8 degrees' 2012-Feb-03 01:34:37 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-03 01:34:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +72.8 degrees ...} 2012-Feb-03 01:34:37 INFO2 rotate_alfa: ALFA commanded to +72.8 degrees 2012-Feb-03 01:34:37 LOG3 sock_errsend: To ALFAMOTOR: POSITION 72.8 REPLY 2012-Feb-03 01:34:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 01:34:37 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 01:34:37 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_051" 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: set ra 299.96 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: set dec 9.4093862000 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: vw% 299.96 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: vw% 9.4093862000 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: pnt tr 299.96 9.4093862000 -CF 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.668 (still bad) 2012-Feb-03 01:34:45 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 01:34:45 INFO3 alfa_motor: ALFA rotator in-position +72.80 degrees 2012-Feb-03 01:34:45 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 01:34:45 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Feb-03 01:34:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:34:45 STOP finish_task: Finishing task 'rotate ALFA to +72.8 degrees' 2012-Feb-03 01:34:45 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-03 01:34:45 INFO2 finish_task: DONE finished configuration: rotating ALFA to +72.8 degrees 2012-Feb-03 01:34:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:34:45 STOP end_task: Finishing task 'rotate ALFA to +72.8 degrees' with status 'OK' 2012-Feb-03 01:34:45 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-03 01:34:45 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 01:34:45 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-03 01:34:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 01:34:45 LOG3 waittrk: Start waittrk 5 2012-Feb-03 01:34:45 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 01:34:45 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Feb-03 01:34:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 01:34:50 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Feb-03 01:34:50 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 01:34:50 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2012-Feb-03 01:36:49 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 01:36:49 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2012-Feb-03 01:36:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:36:49 INFO2 waittrk: Now tracking AGESLEO_p1_051 2012-Feb-03 01:36:49 LOG4 waittrk: Current telescope position: Az = 299.55 ZA = 9.40 2012-Feb-03 01:36:49 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 01:36:49 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-03 01:36:49 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 01:36:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:36:49 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 01:36:49 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-03 01:36:49 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 01:36:49 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Feb-03 01:36:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 01:36:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 01:36:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:36:49 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 01:36:49 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2012-Feb-03 01:36:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 01:36:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:36:50 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:36:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 01:36:50 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2012-Feb-03 01:36:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 01:36:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:36:50 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 01:36:50 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:36:50 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Feb-03 01:36:50 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:36:50 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:36:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:36:50 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Feb-03 01:36:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:36:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 01:36:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:36:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:36:50 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:36:50 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2012-Feb-03 01:36:50 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:36:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:36:50 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2012-Feb-03 01:36:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:36:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:36:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 01:36:50 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Feb-03 01:36:50 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 01:36:50 INFO2 astwait: Waiting for 6 seconds from 05:36:50 to 05:36:56 UTC ... 2012-Feb-03 01:36:50 LOG4 send_obs_status: To obs_status: <1> TASKTIME 6 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 01:36:50 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 01:36:50 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 01:36:56 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 INFO3 astwait: Finished waiting 2012-Feb-03 01:36:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:36:56 LOG5 dopset_later: Calling 'dopset_later 60.645773223607748' 2012-Feb-03 01:36:56 INFO3 dopset_later: Setting Doppler correction for 01:37:56 (60.6 seconds from now) 2012-Feb-03 01:36:56 LOG5 antvel: Calling 'antvel 299.960000 9.409386 F Heliocentric 60.645773223607748' 2012-Feb-03 01:36:56 LOG2 antvel: Transforming current Az = 299.96 ZA = 9.41 to apparent RA = 10:35:40.7 Dec = +13:28:58.5 2012-Feb-03 01:36:56 LOG2 antvel: Parameters to Doppler: Heliocentric 20276 2012 34 0.0 2012-Feb-03 01:36:56 INFO5 antvel: Computed antenna velocity: -11.42848 km/s 2012-Feb-03 01:36:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-11.428476781800001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 01:36:56 INFO4 dopset_gen: New sky frequencies: 1381.296085 1381.296085 1381.296085 1381.296085 1381.296085 1381.296085 1381.296085 1381.296085 1381.296085 2012-Feb-03 01:36:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.296085 sky0=1381.296085 sky1=1381.296085 sky2=1381.296085 sky3=1381.296085 sky4=1381.296085 sky5=1381.296085 sky6=1381.296085 sky7=1381.296085 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 01:36:56 LOG2 dopset_gen: Result from 'sky2syn': 1631.296085 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631296085.0} 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 01:36:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 01:36:56 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 01:36:56 INFO5 fixed_driftmap: Tracking J2000 position: RA = 10:34:04.5 Dec = +13:32:44.2 2012-Feb-03 01:36:56 LOG3 track_source: Calling 'track_source AGESLEO_p1_051 103404.5 133244.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:36:56 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:36:56 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_051} INFO {Slewing to source 'AGESLEO_p1_051' ...} 2012-Feb-03 01:36:56 INFO1 track_source: Starting to track AGESLEO_p1_051 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_051" 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: set ra 103404.5 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: set dec 133244.2 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: pnt tr 103404.5 133244.2 -CJ 2012-Feb-03 01:36:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:36:56 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:36:56 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:36:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:36:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:36:56 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 01:36:56 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 01:36:56 LOG3 waittrk: Start waittrk 5 2012-Feb-03 01:36:56 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 01:36:56 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631296085.0} 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_051" 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: set ra 103404.5 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: set dec 133244.2 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: pnt tr 103404.5 133244.2 -CJ 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: 103404.5 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: 133244.2 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:36:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 01:37:01 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Feb-03 01:37:01 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 01:37:01 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2012-Feb-03 01:37:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 01:37:03 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2012-Feb-03 01:37:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:37:03 INFO2 waittrk: Now tracking AGESLEO_p1_051 2012-Feb-03 01:37:03 LOG4 waittrk: Current telescope position: Az = 299.62 ZA = 9.38 2012-Feb-03 01:37:03 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 01:37:03 LOG5 finish_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-03 01:37:03 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 01:37:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:37:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 01:37:03 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-03 01:37:03 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 01:37:03 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-03 01:37:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 01:37:03 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 01:37:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 01:37:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 01:37:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:37:03 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 01:37:03 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Feb-03 01:37:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 01:37:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:37:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:06 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:37:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 01:37:06 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Feb-03 01:37:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 01:37:06 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 01:37:06 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-03 01:37:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 01:37:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:37:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:37:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:37:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 01:37:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 01:37:06 LOG5 begin_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2012-Feb-03 01:37:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 01:37:06 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:07 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-03 01:37:07 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-03 01:37:07 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-03 01:37:07 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-03 01:37:07 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 01:37:07 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 01:37:07 LOG5 end_task: Level: (5) ID = <10083> Status = 0 0 0 0 ok 2012-Feb-03 01:37:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.022 1.014 ALFA beam 1: 1.089 0.920 2012-Feb-03 01:37:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.889 0.936 ALFA beam 3: 0.977 1.039 2012-Feb-03 01:37:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.771 1.078 ALFA beam 5: 1.091 1.047 2012-Feb-03 01:37:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.992 0.014 ALFA beam 7: 1.077 0.014 2012-Feb-03 01:37:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 01:37:07 LOG5 finish_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-03 01:37:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 01:37:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:37:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 01:37:07 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-03 01:37:07 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 01:37:07 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-03 01:37:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 01:37:07 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 01:37:07 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 01:37:07 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 01:37:07 LOG5 begin_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2012-Feb-03 01:37:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:37:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.014 1.089 0.920 2012-Feb-03 01:37:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.889 0.936 0.977 1.039 2012-Feb-03 01:37:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.078 1.091 1.047 2012-Feb-03 01:37:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.992 0.014 1.077 0.014 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b0s0g0 rms:A 34.0 29.9 B 29.7 29.8 mn:A 0.1 -0.1 B -0.2 -0.4 gn: 12 11 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.1 29.8 B 27.7 29.3 mn:A -0.1 -0.5 B -0.9 0.0 gn: 12 11 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.6 27.7 B 32.9 28.5 mn:A 0.1 0.6 B 0.0 -0.1 gn: 7 11 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b1s1g0 rms:A 33.2 30.6 B 31.2 31.2 mn:A -0.6 -0.4 B 0.6 0.5 gn: 9 10 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.9 31.0 B 31.0 32.5 mn:A 0.1 -0.3 B 0.3 0.1 gn: 11 12 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.8 30.1 B 31.8 29.6 mn:A 0.3 -0.2 B -0.3 0.1 gn: 11 12 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 31.1 B 30.1 26.8 mn:A 0.4 -0.2 B 0.1 -0.2 gn: 13 12 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.1 29.4 B 28.9 30.1 mn:A -0.2 0.4 B 0.2 0.2 gn: 12 12 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.1 28.2 B 31.6 31.8 mn:A -0.4 -0.4 B -0.5 -0.0 gn: 13 12 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 30.6 29.5 mn:A 0.0 -0.0 B -0.3 0.3 gn: 16 13 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.1 29.9 B 29.4 29.5 mn:A 0.8 0.6 B 0.0 0.7 gn: 13 11 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.4 32.2 B 30.0 29.8 mn:A -0.3 0.2 B -0.1 0.1 gn: 13 11 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.8 28.2 B 14.1 14.5 mn:A -0.5 0.3 B 0.4 -0.3 gn: 13 31 2012-Feb-03 01:37:14 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.4 29.4 B 11.1 10.8 mn:A 0.7 0.4 B 0.1 0.1 gn: 14 31 2012-Feb-03 01:37:14 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 01:37:14 LOG5 end_task: Level: (5) ID = <10085> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 01:37:14 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 01:37:14 LOG5 finish_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 01:37:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:37:14 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 01:37:14 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 01:37:14 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 01:37:14 LOG5 finish_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 01:37:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:37:14 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 01:37:14 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 01:37:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 01:37:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 01:37:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 01:37:14 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 01:37:14 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 01:37:14 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 01:37:14 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 01:37:14 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 01:37:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 01:37:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:37:14 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 01:37:14 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 01:37:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 01:37:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 01:37:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:14 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 01:37:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 01:37:14 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 01:37:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:37:14 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 01:37:14 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:37:14 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2012-Feb-03 01:37:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:15 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:37:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:37:15 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:37:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 01:37:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 01:37:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:37:15 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 01:37:15 LOG5 begin_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 01:37:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 01:37:15 LOG5 end_task: Level: (5) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 01:37:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 01:37:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 01:37:15 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 01:37:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 01:37:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 01:37:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:37:15 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:37:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 01:37:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:37:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:37:15 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 01:37:15 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 01:37:15 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 01:37:15 LOG5 log_alfabeam: Parameters: 10.567916666666667 13.545611111111114 10.024744 2012.0932717950668 72.799904 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 0 10.567916666666658 13.545611111111127 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 1 10.565639211734238 13.639674517375454 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 2 10.561032549303313 13.577691640456202 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 3 10.563256000814141 13.483458783692216 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 4 10.570130809172031 13.450893044941552 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 5 10.574815922430249 13.514022210638718 2012-Feb-03 01:37:15 LOG4 log_alfabeam: ALFABEAM 6 10.572547472743469 13.608572292216888 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_051 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: patternid=203400039 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: scanid=203400040 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456296085.0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306296085.0 2012-Feb-03 01:37:15 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 01:37:15 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 01:37:15 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGESLEO_p1_051:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400039:scanid=203400040:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456296085.0:topobfreqhz=1306296085.0:filetype=1 2012-Feb-03 01:37:15 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 01:37:15 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 01:37:15 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 01:37:15 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 01:37:15 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 01:37:15 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 01:37:15 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 01:37:15 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0001.fits 2012-Feb-03 01:37:15 LOG4 from_mock: From MOCK: starok 2012-Feb-03 01:37:15 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 01:37:15 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2012-Feb-03 01:37:15 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 01:37:15 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400040 2012-Feb-03 01:37:16 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 01:37:16 LOG5 begin_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2012-Feb-03 01:37:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120203.a2048.0001.fits} 2012-Feb-03 01:37:16 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 01:37:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 01:37:16 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 01:37:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 01:37:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20237.00 2012-Feb-03 01:37:18 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 01:37:18 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 01:37:18 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:18 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:21 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:37:21.01 2012-Feb-03 01:37:21 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328247441.01 Fri Feb 3 01:37:21 2012 2012-Feb-03 01:37:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.296085 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 01:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.512 (still bad) 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 01:37:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 01:37:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 01:37:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 01:37:27 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 01:37:27 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 01:37:27 LOG5 end_task: Level: (5) ID = <10095> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 01:37:27 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 01:37:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 01:37:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 01:37:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 01:37:27 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 01:37:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 01:37:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 01:37:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 01:37:27 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 01:37:27 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 01:37:27 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 01:37:27 LOG5 log_alfabeam: Parameters: 10.567916666666667 13.545611111111114 10.028087 2012.0932721753238 72.799904 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 0 10.567916666666665 13.545611111111116 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 1 10.565655732612694 13.639758438431306 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 2 10.561038284592295 13.577951783328180 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 3 10.563244948090874 13.483636241702678 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 4 10.570113908140927 13.450808597308617 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 5 10.574810344837912 13.513763893678091 2012-Feb-03 01:37:27 LOG4 log_alfabeam: ALFABEAM 6 10.572558526581844 13.608399681803331 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_051 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: patternid=203400039 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: scanid=203400041 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456296085.0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306296085.0 2012-Feb-03 01:37:27 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 01:37:27 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 01:37:27 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGESLEO_p1_051:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400039:scanid=203400041:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456296085.0:topobfreqhz=1306296085.0:filetype=1 2012-Feb-03 01:37:27 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 01:37:27 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 01:37:27 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 01:37:27 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 01:37:27 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 01:37:27 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 01:37:27 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 01:37:27 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG4 from_mock: From MOCK: starok 2012-Feb-03 01:37:27 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 01:37:27 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 01:37:27 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400041 2012-Feb-03 01:37:27 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 01:37:27 LOG5 begin_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2012-Feb-03 01:37:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 01:37:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 01:37:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20248.00 2012-Feb-03 01:37:28 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 01:37:28 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 01:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.528 (still bad) 2012-Feb-03 01:37:30 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 01:37:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 01:37:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 01:37:33 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:37:33.02 2012-Feb-03 01:37:33 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328247453.02 Fri Feb 3 01:37:33 2012 2012-Feb-03 01:37:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.296085 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 01:37:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 01:37:33 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 01:37:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 01:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:37:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 01:37:39 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 01:37:39 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 01:37:39 LOG5 end_task: Level: (5) ID = <10100> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 01:37:39 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 01:37:39 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 01:37:39 LOG5 finish_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 01:37:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:37:39 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 01:37:39 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 01:37:39 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 299.96 and ZA = 9.41 2012-Feb-03 01:37:39 LOG3 track_source: Calling 'track_source AGESLEO_p1_051 299.96 9.4093862000 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:37:39 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:37:39 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_051} INFO {Slewing to source 'AGESLEO_p1_051' ...} 2012-Feb-03 01:37:39 INFO1 track_source: Starting to track AGESLEO_p1_051 2012-Feb-03 01:37:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_051" 2012-Feb-03 01:37:39 LOG3 vw_send: To DATATAKING: set ra 299.96 2012-Feb-03 01:37:39 LOG3 vw_send: To DATATAKING: set dec 9.4093862000 2012-Feb-03 01:37:39 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:37:39 LOG3 vw_send: To DATATAKING: pnt tr 299.96 9.4093862000 -CF 2012-Feb-03 01:37:39 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:37:39 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:37:39 LOG5 finish_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:37:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:37:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:37:39 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 LOG1 fixed_driftmap: Parameters: HA = -00:33:30.1 Start = 10:02:10.8 LST = 10:01:53.1 diff = 17.7 secs 2012-Feb-03 01:37:39 INFO2 fixed_driftmap: Waiting 15.7 seconds for RA 10:35:41 2012-Feb-03 01:37:39 INFO2 lstwait: Waiting for 15.7 secs from LST 10:01:53 to LST 10:02:09 ... 2012-Feb-03 01:37:39 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.651761226487777 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 01:37:39 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 01:37:39 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_051" 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: set ra 299.96 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: set dec 9.4093862000 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: vw% 299.96 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: vw% 9.4093862000 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: pnt tr 299.96 9.4093862000 -CF 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:37:39 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:37:55 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 01:37:55 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG4 lstwait: Finished waiting 0.35 seconds late 2012-Feb-03 01:37:55 INFO3 lstwait: Finished waiting 2012-Feb-03 01:37:55 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:37:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 01:37:55 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 01:37:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 01:37:55 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 01:37:55 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 01:37:55 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 01:37:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_051 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: patternid=203400042 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: scanid=203400042 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456296085.0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306296085.0 2012-Feb-03 01:37:55 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 01:37:55 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 01:37:55 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGESLEO_p1_051:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400042:scanid=203400042:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456296085.0:topobfreqhz=1306296085.0:filetype=1 2012-Feb-03 01:37:55 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 01:37:55 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 01:37:55 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 01:37:55 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 01:37:55 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 01:37:55 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 01:37:55 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 01:37:55 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG4 from_mock: From MOCK: starok 2012-Feb-03 01:37:55 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 01:37:55 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 01:37:55 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400042 2012-Feb-03 01:37:55 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 01:37:55 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-03 01:37:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 01:37:55 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 01:37:55 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 01:37:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 01:37:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20276.00 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.296085 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 01:37:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.296085 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 01:37:57 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 01:37:57 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-03 01:37:57 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 01:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:38:00 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:38:00.00 2012-Feb-03 01:38:00 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328247480.00 Fri Feb 3 01:38:00 2012 2012-Feb-03 01:38:00 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 01:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:38:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:38:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.025 1.081 0.910 2012-Feb-03 01:38:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.886 0.930 0.974 1.037 2012-Feb-03 01:38:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.768 1.068 1.086 1.039 2012-Feb-03 01:38:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.014 1.068 0.014 2012-Feb-03 01:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 01:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 01:39:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:39:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.026 1.081 0.910 2012-Feb-03 01:39:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.886 0.931 0.969 1.034 2012-Feb-03 01:39:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.097 1.080 1.037 2012-Feb-03 01:39:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.068 0.014 2012-Feb-03 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 01:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2012-Feb-03 01:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:40:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:40:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.027 1.083 0.907 2012-Feb-03 01:40:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.883 0.929 0.967 1.030 2012-Feb-03 01:40:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.767 1.065 1.079 1.037 2012-Feb-03 01:40:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.981 0.014 1.067 0.014 2012-Feb-03 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:41:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:41:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.031 1.091 0.915 2012-Feb-03 01:41:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.887 0.929 0.970 1.035 2012-Feb-03 01:41:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 1.069 1.081 1.038 2012-Feb-03 01:41:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.071 0.014 2012-Feb-03 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 01:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:42:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:42:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 1.028 1.083 0.910 2012-Feb-03 01:42:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.884 0.930 0.972 1.035 2012-Feb-03 01:42:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 1.065 1.080 1.039 2012-Feb-03 01:42:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.014 1.067 0.014 2012-Feb-03 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 01:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:43:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:43:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.029 1.085 0.910 2012-Feb-03 01:43:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.886 0.931 0.972 1.035 2012-Feb-03 01:43:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 1.072 1.077 1.038 2012-Feb-03 01:43:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.014 1.069 0.014 2012-Feb-03 01:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:44:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:44:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.029 1.080 0.907 2012-Feb-03 01:44:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 0.931 0.973 1.036 2012-Feb-03 01:44:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.072 1.080 1.038 2012-Feb-03 01:44:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.014 1.069 0.014 2012-Feb-03 01:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.078 (still bad) 2012-Feb-03 01:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.077 (still bad) 2012-Feb-03 01:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:45:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:45:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.033 1.089 0.915 2012-Feb-03 01:45:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.891 0.937 0.975 1.039 2012-Feb-03 01:45:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.072 1.088 1.045 2012-Feb-03 01:45:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.014 1.075 0.014 2012-Feb-03 01:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:46:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:46:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.025 1.082 0.908 2012-Feb-03 01:46:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.938 0.972 1.034 2012-Feb-03 01:46:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 1.065 1.077 1.037 2012-Feb-03 01:46:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.982 0.014 1.068 0.014 2012-Feb-03 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:47:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:47:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.027 1.081 0.907 2012-Feb-03 01:47:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.886 0.928 0.973 1.034 2012-Feb-03 01:47:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 1.065 1.080 1.038 2012-Feb-03 01:47:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.068 0.014 2012-Feb-03 01:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:48:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:48:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.027 1.080 0.907 2012-Feb-03 01:48:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 0.929 0.970 1.032 2012-Feb-03 01:48:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 1.066 1.080 1.036 2012-Feb-03 01:48:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.983 0.014 1.067 0.014 2012-Feb-03 01:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:48:29.301 (seconds: 6509.301)!} 2012-Feb-03 01:48:29 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:48:29.301 (seconds: 6509.301)! 2012-Feb-03 01:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:30 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 6508.0 to 6509.0! 2012-Feb-03 01:48:31 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (6508.0 - 6510.0)! 2012-Feb-03 01:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:49:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.033 1.086 0.911 2012-Feb-03 01:49:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.887 0.930 0.972 1.035 2012-Feb-03 01:49:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.076 1.084 1.040 2012-Feb-03 01:49:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.071 0.014 2012-Feb-03 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 01:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:50:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:50:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 1.032 1.083 0.908 2012-Feb-03 01:50:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.889 0.932 0.973 1.036 2012-Feb-03 01:50:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.070 1.082 1.039 2012-Feb-03 01:50:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.014 1.071 0.014 2012-Feb-03 01:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 01:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:51:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:51:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.029 1.083 0.907 2012-Feb-03 01:51:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.887 0.931 0.973 1.035 2012-Feb-03 01:51:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.069 1.086 1.040 2012-Feb-03 01:51:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.069 0.014 2012-Feb-03 01:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 01:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-03 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:52:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:52:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 1.064 1.083 0.909 2012-Feb-03 01:52:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.887 0.931 0.974 1.035 2012-Feb-03 01:52:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.069 1.084 1.041 2012-Feb-03 01:52:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.070 0.014 2012-Feb-03 01:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 01:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:53:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:53:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.028 1.083 0.909 2012-Feb-03 01:53:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.885 0.931 0.972 1.036 2012-Feb-03 01:53:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.769 1.066 1.078 1.037 2012-Feb-03 01:53:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.070 0.014 2012-Feb-03 01:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:54:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:54:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.033 1.083 0.908 2012-Feb-03 01:54:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.889 0.931 0.972 1.037 2012-Feb-03 01:54:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 1.070 1.085 1.040 2012-Feb-03 01:54:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.014 1.073 0.014 2012-Feb-03 01:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:55:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:55:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.031 1.084 0.910 2012-Feb-03 01:55:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.888 0.932 0.971 1.037 2012-Feb-03 01:55:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.075 1.088 1.048 2012-Feb-03 01:55:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.014 1.073 0.014 2012-Feb-03 01:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.080 (still bad) 2012-Feb-03 01:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.090 (still bad) 2012-Feb-03 01:56:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:56:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.028 1.081 0.907 2012-Feb-03 01:56:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.887 0.928 0.971 1.033 2012-Feb-03 01:56:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 1.067 1.082 1.039 2012-Feb-03 01:56:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.069 0.014 2012-Feb-03 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.087 (still bad) 2012-Feb-03 01:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.081 (still bad) 2012-Feb-03 01:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.079 (still bad) 2012-Feb-03 01:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.082 (still bad) 2012-Feb-03 01:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.088 (still bad) 2012-Feb-03 01:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.086 (still bad) 2012-Feb-03 01:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.089 (still bad) 2012-Feb-03 01:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 01:57:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 01:57:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.030 1.098 0.922 2012-Feb-03 01:57:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.887 0.926 0.971 1.032 2012-Feb-03 01:57:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.070 1.085 1.040 2012-Feb-03 01:57:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.014 1.072 0.014 2012-Feb-03 01:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 01:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 01:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 01:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 01:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 01:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.085 (still bad) 2012-Feb-03 01:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.084 (still bad) 2012-Feb-03 01:57:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 01:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:58:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 01:58:01 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 01:58:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 01:58:01 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-03 01:58:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 01:58:01 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Feb-03 01:58:01 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 01:58:01 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-03 01:58:01 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 01:58:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 01:58:01 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 01:58:01 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-03 01:58:01 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2012-Feb-03 01:58:01 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES1367_p2_005) < 103139 THEN' 2012-Feb-03 01:58:02 LOG3 is_if_valid: Current source data: up 256.0 17.3 UP - - 155 3.3 2012-Feb-03 01:58:02 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_005) < 103139 2012-Feb-03 01:58:02 INFO5 is_if_valid: Condition parsed as: 10.426803 < 10.527500000000002 2012-Feb-03 01:58:02 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=254.77 alfaangle=-59.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_005 ra=113400.00 dec=214400.00' 2012-Feb-03 01:58:02 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 01:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.083 (still bad) 2012-Feb-03 01:58:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 01:58:02 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 254.77 -59.5 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_005 113400.00 214400.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:58:02 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 01:58:02 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-03 01:58:02 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESLEO_p1_051' 2012-Feb-03 01:58:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 01:58:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_005} 2012-Feb-03 01:58:03 INFO3 fixed_driftmap: Sending telescope to Az = 254.77 and ZA = 15.16 2012-Feb-03 01:58:03 LOG3 track_source: Calling 'track_source AGES1367_p2_005 254.77 15.1574686387 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 01:58:03 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 01:58:03 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-03 01:58:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_005} INFO {Slewing to source 'AGES1367_p2_005' ...} 2012-Feb-03 01:58:03 INFO1 track_source: Starting to track AGES1367_p2_005 2012-Feb-03 01:58:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_005" 2012-Feb-03 01:58:03 LOG3 vw_send: To DATATAKING: set ra 254.77 2012-Feb-03 01:58:03 LOG3 vw_send: To DATATAKING: set dec 15.1574686387 2012-Feb-03 01:58:03 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 01:58:03 LOG3 vw_send: To DATATAKING: pnt tr 254.77 15.1574686387 -CF 2012-Feb-03 01:58:03 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:58:03 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 01:58:03 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-03 01:58:03 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 01:58:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:58:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 01:58:03 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-03 01:58:03 START begin_task: Starting task 'rotate ALFA to -59.5 degrees' 2012-Feb-03 01:58:03 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-03 01:58:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -59.5 degrees ...} 2012-Feb-03 01:58:03 INFO2 rotate_alfa: ALFA commanded to -59.5 degrees 2012-Feb-03 01:58:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION -59.5 REPLY 2012-Feb-03 01:58:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 01:58:03 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 01:58:03 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_005" 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: set ra 254.77 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: set dec 15.1574686387 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: vw% 254.77 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: vw% 15.1574686387 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: pnt tr 254.77 15.1574686387 -CF 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 01:58:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 01:59:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 01:59:17 INFO3 alfa_motor: ALFA rotator in-position -59.50 degrees 2012-Feb-03 01:59:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 01:59:17 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-03 01:59:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 01:59:17 STOP finish_task: Finishing task 'rotate ALFA to -59.5 degrees' 2012-Feb-03 01:59:17 LOG5 finish_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-03 01:59:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to -59.5 degrees 2012-Feb-03 01:59:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 01:59:17 STOP end_task: Finishing task 'rotate ALFA to -59.5 degrees' with status 'OK' 2012-Feb-03 01:59:17 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-03 01:59:17 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 01:59:17 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-03 01:59:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 01:59:17 LOG3 waittrk: Start waittrk 5 2012-Feb-03 01:59:17 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 01:59:17 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Feb-03 01:59:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 01:59:22 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Feb-03 01:59:22 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 01:59:22 LOG5 begin_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2012-Feb-03 02:00:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 02:00:31 LOG5 end_task: Level: (4) ID = <10113> Status = 0 0 0 0 ok 2012-Feb-03 02:00:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:00:31 INFO2 waittrk: Now tracking AGES1367_p2_005 2012-Feb-03 02:00:31 LOG4 waittrk: Current telescope position: Az = 254.35 ZA = 15.17 2012-Feb-03 02:00:31 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 02:00:31 LOG5 finish_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-03 02:00:31 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 02:00:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:00:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 02:00:31 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-03 02:00:31 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 02:00:31 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2012-Feb-03 02:00:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 02:00:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 02:00:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:00:31 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 02:00:31 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Feb-03 02:00:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 02:00:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:00:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:00:32 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:00:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 02:00:32 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Feb-03 02:00:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 02:00:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:00:32 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 02:00:32 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:00:32 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Feb-03 02:00:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:00:32 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:00:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:00:32 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Feb-03 02:00:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:00:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 02:00:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:00:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:00:32 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:00:32 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2012-Feb-03 02:00:32 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:00:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:00:32 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2012-Feb-03 02:00:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:00:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:00:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 02:00:32 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2012-Feb-03 02:00:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 02:00:32 INFO2 astwait: Waiting for 348 seconds from 06:00:32 to 06:06:20 UTC ... 2012-Feb-03 02:00:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 348 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 02:00:32 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 02:00:32 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 02:06:20 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 INFO3 astwait: Finished waiting 2012-Feb-03 02:06:20 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:06:20 LOG5 dopset_later: Calling 'dopset_later 60.711050781773864' 2012-Feb-03 02:06:20 INFO3 dopset_later: Setting Doppler correction for 02:07:20 (60.7 seconds from now) 2012-Feb-03 02:06:20 LOG5 antvel: Calling 'antvel 254.770000 15.157469 F Heliocentric 60.711050781773864' 2012-Feb-03 02:06:20 LOG2 antvel: Transforming current Az = 254.77 ZA = 15.16 to apparent RA = 11:34:39.8 Dec = +21:39:41.5 2012-Feb-03 02:06:20 LOG2 antvel: Parameters to Doppler: Heliocentric 22040 2012 34 0.0 2012-Feb-03 02:06:20 INFO5 antvel: Computed antenna velocity: -15.40926 km/s 2012-Feb-03 02:06:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-15.4092610285 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 02:06:20 INFO4 dopset_gen: New sky frequencies: 1381.314428 1381.314428 1381.314428 1381.314428 1381.314428 1381.314428 1381.314428 1381.314428 1381.314428 2012-Feb-03 02:06:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.314428 sky0=1381.314428 sky1=1381.314428 sky2=1381.314428 sky3=1381.314428 sky4=1381.314428 sky5=1381.314428 sky6=1381.314428 sky7=1381.314428 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 02:06:20 LOG2 dopset_gen: Result from 'sky2syn': 1631.314428 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631314428.0} 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 02:06:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 02:06:20 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 02:06:20 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:04.2 Dec = +21:43:42.2 2012-Feb-03 02:06:20 LOG3 track_source: Calling 'track_source AGES1367_p2_005 113304.2 214342.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:06:20 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:06:20 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_005} INFO {Slewing to source 'AGES1367_p2_005' ...} 2012-Feb-03 02:06:20 INFO1 track_source: Starting to track AGES1367_p2_005 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_005" 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: set ra 113304.2 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: set dec 214342.2 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: pnt tr 113304.2 214342.2 -CJ 2012-Feb-03 02:06:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:06:20 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:06:20 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:06:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:06:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:06:20 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 02:06:20 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 02:06:20 LOG3 waittrk: Start waittrk 5 2012-Feb-03 02:06:20 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 02:06:20 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631314428.0} 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_005" 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: set ra 113304.2 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: set dec 214342.2 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: vw% 113304.2 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: vw% 214342.2 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: pnt tr 113304.2 214342.2 -CJ 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:06:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:06:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 02:06:25 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Feb-03 02:06:25 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 02:06:25 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-03 02:06:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 02:06:27 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-03 02:06:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:06:27 INFO2 waittrk: Now tracking AGES1367_p2_005 2012-Feb-03 02:06:27 LOG4 waittrk: Current telescope position: Az = 254.35 ZA = 15.15 2012-Feb-03 02:06:27 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 02:06:27 LOG5 finish_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-03 02:06:27 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 02:06:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:06:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 02:06:27 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-03 02:06:27 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 02:06:27 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-03 02:06:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 02:06:27 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 02:06:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 02:06:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 02:06:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:06:27 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 02:06:27 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-03 02:06:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 02:06:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:06:30 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:06:30 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 02:06:30 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-03 02:06:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 02:06:30 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 02:06:30 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-03 02:06:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 02:06:30 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:06:30 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:06:30 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:06:30 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:06:30 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 02:06:30 LOG5 begin_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-03 02:06:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 02:06:30 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:06:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Feb-03 02:06:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2012-Feb-03 02:06:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-03 02:06:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-03 02:06:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 02:06:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 02:06:31 LOG5 end_task: Level: (5) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-03 02:06:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.073 1.056 ALFA beam 1: 0.899 0.916 2012-Feb-03 02:06:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.916 0.944 ALFA beam 3: 1.003 1.102 2012-Feb-03 02:06:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.783 0.920 ALFA beam 5: 0.953 1.121 2012-Feb-03 02:06:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.120 0.014 ALFA beam 7: 0.973 0.014 2012-Feb-03 02:06:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 02:06:31 LOG5 finish_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-03 02:06:31 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 02:06:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:06:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 02:06:31 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-03 02:06:31 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 02:06:31 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-03 02:06:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 02:06:31 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 02:06:31 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 02:06:31 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 02:06:31 LOG5 begin_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-03 02:06:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 02:06:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.056 0.899 0.916 2012-Feb-03 02:06:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.944 1.003 1.102 2012-Feb-03 02:06:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 0.920 0.953 1.121 2012-Feb-03 02:06:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.120 0.014 0.973 0.014 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.4 B 30.1 30.1 mn:A 0.0 0.0 B -0.2 -0.5 gn: 11 11 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b0s1g0 rms:A 16.3 15.5 B 16.4 17.3 mn:A 0.1 -0.5 B -0.5 0.2 gn: 6 6 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.6 28.6 B 32.8 28.5 mn:A 0.3 0.7 B 0.2 0.1 gn: 7 11 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b1s1g0 rms:A 17.9 16.4 B 18.5 18.4 mn:A -0.4 -0.3 B 0.7 0.4 gn: 3 5 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 27.9 B 30.9 32.4 mn:A 0.0 -0.4 B 0.4 -0.0 gn: 10 12 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b2s1g0 rms:A 17.1 17.3 B 18.6 17.3 mn:A 0.4 -0.1 B 0.1 0.4 gn: 6 7 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.5 B 30.8 27.4 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b3s1g0 rms:A 17.2 16.7 B 17.0 17.7 mn:A -0.2 0.3 B 0.4 0.2 gn: 7 7 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.6 B 29.0 29.1 mn:A -0.4 -0.3 B -0.5 -0.1 gn: 13 11 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b4s1g0 rms:A 16.0 14.4 B 17.6 17.0 mn:A 0.1 0.2 B -0.2 0.3 gn: 10 8 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.4 28.4 B 30.9 30.9 mn:A 0.6 0.6 B 0.0 0.6 gn: 12 11 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b5s1g0 rms:A 17.2 17.1 B 16.4 16.2 mn:A -0.3 0.4 B 0.1 0.4 gn: 7 5 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.1 30.3 B 14.1 14.5 mn:A -0.4 0.3 B 0.5 -0.2 gn: 13 31 2012-Feb-03 02:06:37 INFO3 from_mock: From MOCK: b6s1g0 rms:A 17.0 15.5 B 11.1 10.8 mn:A 0.7 0.5 B 0.2 0.2 gn: 8 31 2012-Feb-03 02:06:37 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 02:06:37 LOG5 end_task: Level: (5) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 02:06:37 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 02:06:37 LOG5 finish_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 02:06:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:06:37 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 02:06:37 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 02:06:37 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 02:06:37 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 02:06:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:06:37 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 02:06:37 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 02:06:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 02:06:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 02:06:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 02:06:37 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 02:06:37 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 02:06:37 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 02:06:37 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 02:06:37 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 02:06:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 02:06:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:06:37 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 02:06:37 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 02:06:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 02:06:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:06:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:06:37 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:06:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 02:06:37 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Feb-03 02:06:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 02:06:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:06:38 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 02:06:38 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:06:38 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:06:38 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:06:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:06:38 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:06:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 02:06:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:06:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:06:38 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:06:38 LOG5 begin_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:06:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:06:38 LOG5 end_task: Level: (5) ID = <10133> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:06:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:06:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 02:06:38 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 02:06:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 02:06:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 02:06:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 02:06:38 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 02:06:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 02:06:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 02:06:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 02:06:38 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 02:06:38 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:06:38 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 02:06:38 LOG5 log_alfabeam: Parameters: 11.551166666666667 21.72838888888889 10.516086 2012.0933276928536 -59.500015 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 0 11.551166666666672 21.728388888888887 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 1 11.552206628163132 21.638141697838183 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 2 11.558232960926070 21.698139128475574 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 3 11.557170746676833 21.788893155702301 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 4 11.550087022914694 21.818552652948274 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 5 11.544094378389087 21.758003697609528 2012-Feb-03 02:06:38 LOG4 log_alfabeam: ALFABEAM 6 11.545151698769558 21.668346075249985 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_005 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: patternid=203400042 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: scanid=203400043 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314428.0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314428.0 2012-Feb-03 02:06:38 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:06:38 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:06:38 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_005:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400042:scanid=203400043:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314428.0:topobfreqhz=1306314428.0:filetype=1 2012-Feb-03 02:06:38 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:06:38 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:06:38 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:06:38 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:06:38 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:06:38 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 02:06:38 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:06:38 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0002.fits 2012-Feb-03 02:06:38 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:06:38 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:06:38 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Feb-03 02:06:38 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:06:38 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400043 2012-Feb-03 02:06:39 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:06:39 LOG5 begin_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2012-Feb-03 02:06:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120203.a2048.0002.fits} 2012-Feb-03 02:06:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:06:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:06:39 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:06:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 02:06:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22000.00 2012-Feb-03 02:06:41 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:06:41 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 02:06:41 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:41 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:44 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:06:44.01 2012-Feb-03 02:06:44 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328249204.01 Fri Feb 3 02:06:44 2012 2012-Feb-03 02:06:44 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314428 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:06:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:06:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:06:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:06:50 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:06:50 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:06:50 LOG5 end_task: Level: (5) ID = <10138> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:06:50 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 02:06:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 02:06:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 02:06:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 02:06:50 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 02:06:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 02:06:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 02:06:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 02:06:50 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 02:06:50 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:06:50 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 02:06:50 LOG5 log_alfabeam: Parameters: 11.551166666666667 21.72838888888889 10.519150 2012.0933280414226 -59.500015 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 0 11.551166666666667 21.728388888888883 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 1 11.552211566539574 21.638152789849237 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 2 11.558234630942625 21.698214289138036 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 3 11.557167370574509 21.788958444824260 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 4 11.550081970679429 21.818540893136625 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 5 11.544092737746581 21.757926810709694 2012-Feb-03 02:06:50 LOG4 log_alfabeam: ALFABEAM 6 11.545155002490461 21.668282162693149 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_005 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: patternid=203400042 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: scanid=203400044 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314428.0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314428.0 2012-Feb-03 02:06:50 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:06:50 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:06:50 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_005:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400042:scanid=203400044:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314428.0:topobfreqhz=1306314428.0:filetype=1 2012-Feb-03 02:06:50 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:06:50 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:06:50 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:06:50 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:06:50 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:06:50 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 02:06:50 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:06:50 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:06:50 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:06:50 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:06:50 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400044 2012-Feb-03 02:06:50 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:06:50 LOG5 begin_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-03 02:06:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:06:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 02:06:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22011.00 2012-Feb-03 02:06:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:06:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.548 (still bad) 2012-Feb-03 02:06:52 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:06:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 02:06:52 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:52 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:06:55 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:06:55.00 2012-Feb-03 02:06:55 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328249215.00 Fri Feb 3 02:06:55 2012 2012-Feb-03 02:06:55 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314428 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:06:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:06:56 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 02:06:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Feb-03 02:07:01 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:07:01 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:07:01 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:07:01 LOG5 end_task: Level: (5) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:07:01 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 02:07:01 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 02:07:01 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 02:07:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:07:01 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 02:07:01 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 02:07:01 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 254.77 and ZA = 15.16 2012-Feb-03 02:07:01 LOG3 track_source: Calling 'track_source AGES1367_p2_005 254.77 15.1574686387 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:07:01 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:07:01 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_005} INFO {Slewing to source 'AGES1367_p2_005' ...} 2012-Feb-03 02:07:01 INFO1 track_source: Starting to track AGES1367_p2_005 2012-Feb-03 02:07:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_005" 2012-Feb-03 02:07:01 LOG3 vw_send: To DATATAKING: set ra 254.77 2012-Feb-03 02:07:01 LOG3 vw_send: To DATATAKING: set dec 15.1574686387 2012-Feb-03 02:07:01 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:07:01 LOG3 vw_send: To DATATAKING: pnt tr 254.77 15.1574686387 -CF 2012-Feb-03 02:07:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:07:01 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:07:01 LOG5 finish_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:07:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:07:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:07:01 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 LOG1 fixed_driftmap: Parameters: HA = -01:03:00.3 Start = 10:31:39.7 LST = 10:31:20.0 diff = 19.8 secs 2012-Feb-03 02:07:01 INFO2 fixed_driftmap: Waiting 17.8 seconds for RA 11:34:40 2012-Feb-03 02:07:01 INFO2 lstwait: Waiting for 17.7 secs from LST 10:31:20 to LST 10:31:38 ... 2012-Feb-03 02:07:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.716763786575999 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 02:07:01 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 02:07:01 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_005" 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: set ra 254.77 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: set dec 15.1574686387 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: vw% 254.77 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: vw% 15.1574686387 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: pnt tr 254.77 15.1574686387 -CF 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:07:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Feb-03 02:07:19 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 02:07:19 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG4 lstwait: Finished waiting 0.28 seconds late 2012-Feb-03 02:07:19 INFO3 lstwait: Finished waiting 2012-Feb-03 02:07:19 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:07:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 02:07:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 02:07:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 02:07:19 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 02:07:19 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:07:19 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 02:07:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_005 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: patternid=203400045 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: scanid=203400045 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314428.0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314428.0 2012-Feb-03 02:07:19 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:07:19 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:07:19 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_005:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400045:scanid=203400045:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314428.0:topobfreqhz=1306314428.0:filetype=1 2012-Feb-03 02:07:19 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:07:19 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:07:19 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:07:19 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:07:19 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:07:19 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 02:07:19 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:07:19 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:07:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:07:19 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:07:19 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400045 2012-Feb-03 02:07:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:07:19 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-03 02:07:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:07:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:07:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:07:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 02:07:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22040.00 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314428 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:07:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314428 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:07:21 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:07:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2012-Feb-03 02:07:21 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Feb-03 02:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2012-Feb-03 02:07:24 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:07:24.01 2012-Feb-03 02:07:24 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328249244.01 Fri Feb 3 02:07:24 2012 2012-Feb-03 02:07:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 02:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:07:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:07:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.065 0.901 0.916 2012-Feb-03 02:07:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.944 1.007 1.105 2012-Feb-03 02:07:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.920 0.954 1.114 2012-Feb-03 02:07:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.121 0.024 0.975 0.025 2012-Feb-03 02:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2012-Feb-03 02:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2012-Feb-03 02:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2012-Feb-03 02:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.158 (still bad) 2012-Feb-03 02:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.150 (still bad) 2012-Feb-03 02:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2012-Feb-03 02:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2012-Feb-03 02:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 02:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 02:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 02:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:08:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.061 0.904 0.917 2012-Feb-03 02:08:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.942 1.005 1.104 2012-Feb-03 02:08:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.917 0.949 1.112 2012-Feb-03 02:08:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 0.024 0.978 0.024 2012-Feb-03 02:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-03 02:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:09:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:09:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.063 0.905 0.919 2012-Feb-03 02:09:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.945 1.008 1.108 2012-Feb-03 02:09:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.916 0.952 1.112 2012-Feb-03 02:09:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.128 0.021 0.979 0.022 2012-Feb-03 02:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2012-Feb-03 02:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2012-Feb-03 02:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2012-Feb-03 02:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Feb-03 02:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2012-Feb-03 02:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2012-Feb-03 02:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:10:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:10:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.063 0.903 0.919 2012-Feb-03 02:10:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.944 1.011 1.109 2012-Feb-03 02:10:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.923 0.954 1.114 2012-Feb-03 02:10:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 0.024 0.978 0.024 2012-Feb-03 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 02:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Feb-03 02:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Feb-03 02:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-03 02:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 02:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 02:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2012-Feb-03 02:11:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:11:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.061 0.903 0.917 2012-Feb-03 02:11:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.942 1.007 1.106 2012-Feb-03 02:11:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 0.919 0.953 1.111 2012-Feb-03 02:11:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.024 0.975 0.025 2012-Feb-03 02:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Feb-03 02:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-03 02:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 02:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-03 02:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:12:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:12:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.058 0.904 0.917 2012-Feb-03 02:12:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.944 1.009 1.106 2012-Feb-03 02:12:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.919 0.952 1.111 2012-Feb-03 02:12:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 0.024 0.977 0.025 2012-Feb-03 02:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:13:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 02:13:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.061 0.903 0.917 2012-Feb-03 02:13:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.947 1.009 1.107 2012-Feb-03 02:13:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.921 0.951 1.113 2012-Feb-03 02:13:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 0.025 0.976 0.025 2012-Feb-03 02:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 02:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-03 02:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:14:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 02:14:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.063 0.908 0.920 2012-Feb-03 02:14:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.946 1.013 1.111 2012-Feb-03 02:14:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.922 0.956 1.115 2012-Feb-03 02:14:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 0.025 0.979 0.025 2012-Feb-03 02:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 02:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 02:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-03 02:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2012-Feb-03 02:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2012-Feb-03 02:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2012-Feb-03 02:15:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:15:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.066 0.907 0.920 2012-Feb-03 02:15:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.945 1.011 1.110 2012-Feb-03 02:15:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.921 0.976 1.138 2012-Feb-03 02:15:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 0.024 0.981 0.025 2012-Feb-03 02:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2012-Feb-03 02:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2012-Feb-03 02:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2012-Feb-03 02:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.130 (still bad) 2012-Feb-03 02:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2012-Feb-03 02:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:16:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 02:16:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.068 0.912 0.921 2012-Feb-03 02:16:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.947 1.016 1.113 2012-Feb-03 02:16:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.922 0.953 1.116 2012-Feb-03 02:16:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.128 0.025 0.981 0.025 2012-Feb-03 02:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-03 02:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2012-Feb-03 02:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2012-Feb-03 02:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:17:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 02:17:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.061 0.906 0.917 2012-Feb-03 02:17:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.945 1.010 1.108 2012-Feb-03 02:17:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.919 0.955 1.114 2012-Feb-03 02:17:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.025 0.978 0.025 2012-Feb-03 02:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2012-Feb-03 02:18:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:18:27.303 (seconds: 8307.303)!} 2012-Feb-03 02:18:27 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:18:27.303 (seconds: 8307.303)! 2012-Feb-03 02:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:18:28 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 8306.0 to 8307.0! 2012-Feb-03 02:18:29 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (8306.0 - 8308.0)! 2012-Feb-03 02:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2012-Feb-03 02:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:18:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:18:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.064 0.906 0.917 2012-Feb-03 02:18:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.945 1.012 1.108 2012-Feb-03 02:18:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.918 0.956 1.116 2012-Feb-03 02:18:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.126 0.024 0.979 0.025 2012-Feb-03 02:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2012-Feb-03 02:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2012-Feb-03 02:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:19:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 02:19:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.063 0.908 0.920 2012-Feb-03 02:19:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.949 1.014 1.112 2012-Feb-03 02:19:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.920 0.953 1.114 2012-Feb-03 02:19:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.126 0.025 0.979 0.025 2012-Feb-03 02:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:20:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:20:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.064 0.909 0.920 2012-Feb-03 02:20:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.950 1.020 1.118 2012-Feb-03 02:20:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.921 0.954 1.115 2012-Feb-03 02:20:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 0.024 0.982 0.025 2012-Feb-03 02:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2012-Feb-03 02:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2012-Feb-03 02:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2012-Feb-03 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-03 02:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 02:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2012-Feb-03 02:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 02:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-03 02:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-03 02:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-03 02:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2012-Feb-03 02:21:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:21:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.062 0.906 0.919 2012-Feb-03 02:21:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.947 1.010 1.109 2012-Feb-03 02:21:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.922 0.952 1.114 2012-Feb-03 02:21:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.124 0.024 0.979 0.025 2012-Feb-03 02:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 02:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2012-Feb-03 02:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2012-Feb-03 02:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:22:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:22:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.064 0.910 0.917 2012-Feb-03 02:22:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.944 1.012 1.110 2012-Feb-03 02:22:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.921 0.956 1.115 2012-Feb-03 02:22:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.123 0.024 0.979 0.025 2012-Feb-03 02:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-03 02:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:23:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:23:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.080 0.909 0.919 2012-Feb-03 02:23:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.947 1.011 1.110 2012-Feb-03 02:23:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.919 0.954 1.113 2012-Feb-03 02:23:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.127 0.024 0.979 0.024 2012-Feb-03 02:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-03 02:24:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:24:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.064 0.911 0.920 2012-Feb-03 02:24:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.949 1.012 1.111 2012-Feb-03 02:24:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.924 0.957 1.116 2012-Feb-03 02:24:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.125 0.021 0.980 0.021 2012-Feb-03 02:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2012-Feb-03 02:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2012-Feb-03 02:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2012-Feb-03 02:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2012-Feb-03 02:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2012-Feb-03 02:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.127 (still bad) 2012-Feb-03 02:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 02:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:25:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:25:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.063 0.910 0.919 2012-Feb-03 02:25:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.956 1.017 1.117 2012-Feb-03 02:25:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.927 0.955 1.120 2012-Feb-03 02:25:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.130 0.024 0.980 0.024 2012-Feb-03 02:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.134 (still bad) 2012-Feb-03 02:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2012-Feb-03 02:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.136 (still bad) 2012-Feb-03 02:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.137 (still bad) 2012-Feb-03 02:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2012-Feb-03 02:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-03 02:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.138 (still bad) 2012-Feb-03 02:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 02:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:26:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 02:26:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.064 0.912 0.922 2012-Feb-03 02:26:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.952 1.016 1.116 2012-Feb-03 02:26:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.925 0.955 1.120 2012-Feb-03 02:26:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.128 0.024 0.981 0.025 2012-Feb-03 02:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 02:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2012-Feb-03 02:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 02:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 02:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2012-Feb-03 02:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 02:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 02:27:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:27:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:27:25 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:27:25 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:27:25 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-03 02:27:25 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:27:25 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2012-Feb-03 02:27:25 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 02:27:25 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-03 02:27:25 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 02:27:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 02:27:25 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 02:27:25 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-03 02:27:25 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2012-Feb-03 02:27:25 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES1367_p2_007) < 105508 THEN' 2012-Feb-03 02:27:26 LOG3 is_if_valid: Current source data: up 250.3 10.6 UP - - 125 1.9 2012-Feb-03 02:27:26 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_007) < 105508 2012-Feb-03 02:27:26 INFO5 is_if_valid: Condition parsed as: 10.894811666666666 < 10.918888888888889 2012-Feb-03 02:27:26 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=249.02 alfaangle=-50.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_007 ra=113400.00 dec=214100.00' 2012-Feb-03 02:27:26 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 02:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 02:27:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 02:27:27 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 249.02 -50.6 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_007 113400.00 214100.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:27:27 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 02:27:27 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-03 02:27:27 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_005' 2012-Feb-03 02:27:27 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 02:27:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_007} 2012-Feb-03 02:27:27 INFO3 fixed_driftmap: Sending telescope to Az = 249.02 and ZA = 9.84 2012-Feb-03 02:27:27 LOG3 track_source: Calling 'track_source AGES1367_p2_007 249.02 9.8367650285 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:27:27 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:27:27 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-03 02:27:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_007} INFO {Slewing to source 'AGES1367_p2_007' ...} 2012-Feb-03 02:27:27 INFO1 track_source: Starting to track AGES1367_p2_007 2012-Feb-03 02:27:27 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_007" 2012-Feb-03 02:27:27 LOG3 vw_send: To DATATAKING: set ra 249.02 2012-Feb-03 02:27:27 LOG3 vw_send: To DATATAKING: set dec 9.8367650285 2012-Feb-03 02:27:27 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:27:27 LOG3 vw_send: To DATATAKING: pnt tr 249.02 9.8367650285 -CF 2012-Feb-03 02:27:27 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:27:27 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:27:27 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-03 02:27:27 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:27:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:27:27 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:27:27 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-03 02:27:27 START begin_task: Starting task 'rotate ALFA to -50.6 degrees' 2012-Feb-03 02:27:27 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-03 02:27:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -50.6 degrees ...} 2012-Feb-03 02:27:27 INFO2 rotate_alfa: ALFA commanded to -50.6 degrees 2012-Feb-03 02:27:27 LOG3 sock_errsend: To ALFAMOTOR: POSITION -50.6 REPLY 2012-Feb-03 02:27:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 02:27:27 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 02:27:27 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_007" 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: set ra 249.02 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: set dec 9.8367650285 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: vw% 249.02 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: vw% 9.8367650285 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: pnt tr 249.02 9.8367650285 -CF 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:27:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:27:33 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 02:27:33 INFO3 alfa_motor: ALFA rotator in-position -50.60 degrees 2012-Feb-03 02:27:33 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 02:27:33 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-03 02:27:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:27:33 STOP finish_task: Finishing task 'rotate ALFA to -50.6 degrees' 2012-Feb-03 02:27:33 LOG5 finish_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-03 02:27:33 INFO2 finish_task: DONE finished configuration: rotating ALFA to -50.6 degrees 2012-Feb-03 02:27:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:27:33 STOP end_task: Finishing task 'rotate ALFA to -50.6 degrees' with status 'OK' 2012-Feb-03 02:27:33 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-03 02:27:34 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 02:27:34 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-03 02:27:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 02:27:34 LOG3 waittrk: Start waittrk 5 2012-Feb-03 02:27:34 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 02:27:34 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Feb-03 02:27:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 02:27:39 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Feb-03 02:27:39 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 02:27:39 LOG5 begin_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2012-Feb-03 02:29:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 02:29:45 LOG5 end_task: Level: (4) ID = <10156> Status = 0 0 0 0 ok 2012-Feb-03 02:29:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:29:45 INFO2 waittrk: Now tracking AGES1367_p2_007 2012-Feb-03 02:29:45 LOG4 waittrk: Current telescope position: Az = 248.54 ZA = 9.84 2012-Feb-03 02:29:45 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 02:29:45 LOG5 finish_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-03 02:29:45 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 02:29:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:29:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 02:29:45 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-03 02:29:45 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 02:29:45 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2012-Feb-03 02:29:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 02:29:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 02:29:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:29:45 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 02:29:45 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Feb-03 02:29:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 02:29:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:29:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:29:46 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:29:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 02:29:46 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Feb-03 02:29:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 02:29:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:29:46 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 02:29:46 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:29:46 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Feb-03 02:29:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:29:47 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:29:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:29:47 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:29:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 02:29:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:29:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:29:47 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:29:47 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:29:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:29:47 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:29:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:29:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 02:29:47 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG5 dopset_later: Calling 'dopset_later 59.051073313410612' 2012-Feb-03 02:29:47 INFO3 dopset_later: Setting Doppler correction for 02:30:45 (59.1 seconds from now) 2012-Feb-03 02:29:47 LOG5 antvel: Calling 'antvel 249.020000 9.836765 F Heliocentric 59.051073313410612' 2012-Feb-03 02:29:47 LOG2 antvel: Transforming current Az = 249.02 ZA = 9.84 to apparent RA = 11:34:39.9 Dec = +21:36:41.5 2012-Feb-03 02:29:47 LOG2 antvel: Parameters to Doppler: Heliocentric 23445 2012 34 0.0 2012-Feb-03 02:29:47 INFO5 antvel: Computed antenna velocity: -15.37437 km/s 2012-Feb-03 02:29:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-15.3743687086 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 02:29:47 INFO4 dopset_gen: New sky frequencies: 1381.314267 1381.314267 1381.314267 1381.314267 1381.314267 1381.314267 1381.314267 1381.314267 1381.314267 2012-Feb-03 02:29:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.314267 sky0=1381.314267 sky1=1381.314267 sky2=1381.314267 sky3=1381.314267 sky4=1381.314267 sky5=1381.314267 sky6=1381.314267 sky7=1381.314267 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 02:29:47 LOG2 dopset_gen: Result from 'sky2syn': 1631.314267 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631314267.0} 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 02:29:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 02:29:47 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 02:29:47 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:05.9 Dec = +21:40:42.2 2012-Feb-03 02:29:47 LOG3 track_source: Calling 'track_source AGES1367_p2_007 113305.9 214042.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:29:47 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:29:47 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_007} INFO {Slewing to source 'AGES1367_p2_007' ...} 2012-Feb-03 02:29:47 INFO1 track_source: Starting to track AGES1367_p2_007 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_007" 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: set ra 113305.9 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: set dec 214042.2 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: pnt tr 113305.9 214042.2 -CJ 2012-Feb-03 02:29:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:29:47 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:29:47 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:29:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:29:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:29:47 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 02:29:47 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 02:29:47 LOG3 waittrk: Start waittrk 5 2012-Feb-03 02:29:47 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 02:29:47 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631314267.0} 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_007" 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: set ra 113305.9 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: set dec 214042.2 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: pnt tr 113305.9 214042.2 -CJ 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: vw% 113305.9 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: vw% 214042.2 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:29:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 02:29:52 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Feb-03 02:29:52 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 02:29:52 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Feb-03 02:29:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 02:29:54 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Feb-03 02:29:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:29:54 INFO2 waittrk: Now tracking AGES1367_p2_007 2012-Feb-03 02:29:54 LOG4 waittrk: Current telescope position: Az = 248.54 ZA = 9.82 2012-Feb-03 02:29:54 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 02:29:54 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-03 02:29:54 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 02:29:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:29:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 02:29:54 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-03 02:29:54 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 02:29:54 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-03 02:29:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 02:29:54 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 02:29:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 02:29:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 02:29:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:29:54 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 02:29:54 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Feb-03 02:29:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 02:29:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:29:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:29:57 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:29:57 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 02:29:57 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Feb-03 02:29:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 02:29:57 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 02:29:57 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-03 02:29:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 02:29:57 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:29:57 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:29:57 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:29:57 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:29:57 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 02:29:57 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Feb-03 02:29:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 02:29:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:29:58 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2012-Feb-03 02:29:58 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2012-Feb-03 02:29:58 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Feb-03 02:29:58 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-03 02:29:58 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 02:29:58 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 02:29:58 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Feb-03 02:29:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.042 1.030 ALFA beam 1: 1.120 1.123 2012-Feb-03 02:29:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.092 0.897 ALFA beam 3: 0.966 1.052 2012-Feb-03 02:29:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.772 1.102 ALFA beam 5: 0.913 1.067 2012-Feb-03 02:29:58 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.085 0.014 ALFA beam 7: 0.944 0.014 2012-Feb-03 02:29:58 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 02:29:58 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-03 02:29:58 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 02:29:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:29:58 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 02:29:58 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-03 02:29:58 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 02:29:58 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-03 02:29:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 02:29:58 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 02:29:58 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 02:29:58 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 02:29:58 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Feb-03 02:30:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 02:30:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 1.030 1.120 1.123 2012-Feb-03 02:30:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.897 0.966 1.052 2012-Feb-03 02:30:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.102 0.913 1.067 2012-Feb-03 02:30:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 0.014 0.944 0.014 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.8 27.0 B 29.8 29.8 mn:A -0.0 -0.1 B -0.3 -0.5 gn: 11 11 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b0s1g0 rms:A 12.8 12.2 B 12.9 13.7 mn:A 0.1 -0.5 B -0.7 0.1 gn: 4 4 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.3 B 32.5 28.1 mn:A 0.2 0.7 B 0.1 0.3 gn: 7 11 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b1s1g0 rms:A 12.6 11.5 B 14.5 14.4 mn:A -0.4 -0.3 B 0.6 0.5 gn: 0 3 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.7 30.7 B 30.4 31.8 mn:A 0.1 -0.3 B 0.2 -0.0 gn: 11 12 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b2s1g0 rms:A 16.7 16.9 B 14.5 13.5 mn:A 0.3 -0.1 B -0.0 0.4 gn: 6 5 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.2 31.0 B 30.1 26.9 mn:A 0.3 -0.3 B -0.1 -0.2 gn: 13 12 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b3s1g0 rms:A 12.0 11.6 B 16.5 17.2 mn:A -0.2 0.4 B 0.3 0.2 gn: 4 7 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.3 28.4 B 28.5 28.6 mn:A -0.3 -0.4 B -0.5 0.1 gn: 13 11 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b4s1g0 rms:A 12.7 11.3 B 14.3 13.9 mn:A 0.1 0.1 B -0.1 0.1 gn: 8 6 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.3 31.1 B 30.1 30.1 mn:A 0.7 0.6 B -0.0 0.6 gn: 13 11 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b5s1g0 rms:A 10.8 10.7 B 12.8 12.7 mn:A -0.2 0.6 B 0.2 0.2 gn: 3 3 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.5 29.8 B 14.1 14.5 mn:A -0.5 0.2 B 0.5 -0.3 gn: 13 31 2012-Feb-03 02:30:04 INFO3 from_mock: From MOCK: b6s1g0 rms:A 15.3 13.9 B 11.1 10.8 mn:A 0.8 0.6 B 0.2 0.3 gn: 7 31 2012-Feb-03 02:30:04 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 02:30:04 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 02:30:04 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 02:30:04 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 02:30:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:30:04 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 02:30:04 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 02:30:04 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 02:30:04 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 02:30:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:30:04 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 02:30:04 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 02:30:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 02:30:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 02:30:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 02:30:04 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 02:30:04 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 02:30:04 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 02:30:04 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 02:30:04 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 02:30:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 02:30:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:30:04 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 02:30:04 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 02:30:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 02:30:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:30:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:30:04 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:30:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 02:30:04 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 02:30:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:30:04 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 02:30:04 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:30:04 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Feb-03 02:30:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:30:05 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:30:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:30:05 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:30:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 02:30:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:30:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:30:05 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:30:05 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0003.fits 2012-Feb-03 02:30:05 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:30:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:30:05 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:30:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:30:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 02:30:05 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 02:30:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 02:30:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 02:30:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 02:30:05 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120203.a2048.0003.fits} 2012-Feb-03 02:30:05 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 02:30:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 02:30:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 02:30:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 02:30:05 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 02:30:05 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:30:05 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 02:30:05 LOG5 log_alfabeam: Parameters: 11.551638888888888 21.678388888888893 10.907711 2012.0933722463051 -50.600029 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 0 11.551638888888883 21.678388888888897 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 1 11.552386340456358 21.587215439679856 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 2 11.558536163361536 21.647680386997951 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 3 11.557751186032521 21.739694471753786 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 4 11.550827242867342 21.769613816038895 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 5 11.544736592687675 21.708007133722436 2012-Feb-03 02:30:05 LOG4 log_alfabeam: ALFABEAM 6 11.545510416191751 21.617620240183957 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_007 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: patternid=203400045 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: scanid=203400046 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314267.0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314267.0 2012-Feb-03 02:30:05 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:30:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:30:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_007:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400045:scanid=203400046:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314267.0:topobfreqhz=1306314267.0:filetype=1 2012-Feb-03 02:30:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:30:05 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:30:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:30:05 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:30:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:30:05 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 02:30:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:30:05 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:30:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:30:05 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Feb-03 02:30:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:30:05 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400046 2012-Feb-03 02:30:06 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:30:06 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Feb-03 02:30:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:30:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:30:06 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:30:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 02:30:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23407.00 2012-Feb-03 02:30:07 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:30:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 02:30:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:30:10.01 2012-Feb-03 02:30:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328250610.01 Fri Feb 3 02:30:10 2012 2012-Feb-03 02:30:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314267 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:30:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:30:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.521 (still bad) 2012-Feb-03 02:30:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:30:16 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:30:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:30:16 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:30:16 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 02:30:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 02:30:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 02:30:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 02:30:16 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 02:30:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 02:30:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 02:30:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 02:30:16 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 02:30:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:30:16 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 02:30:16 LOG5 log_alfabeam: Parameters: 11.551638888888888 21.678388888888893 10.910775 2012.0933725948742 -50.600029 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 0 11.551638888888883 21.678388888888897 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 1 11.552396783213117 21.587232539733773 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 2 11.558539717093158 21.647833821957263 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 3 11.557744014783925 21.739833514546337 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 4 11.550816511657358 21.769595484402846 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 5 11.544733162948598 21.707849216159197 2012-Feb-03 02:30:16 LOG4 log_alfabeam: ALFABEAM 6 11.545517433694863 21.617483331967005 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_007 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: patternid=203400045 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: scanid=203400047 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314267.0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314267.0 2012-Feb-03 02:30:16 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:30:16 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:30:16 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_007:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400045:scanid=203400047:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314267.0:topobfreqhz=1306314267.0:filetype=1 2012-Feb-03 02:30:16 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:30:16 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:30:16 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:30:16 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:30:16 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:30:16 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 02:30:16 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:30:16 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:30:16 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:30:16 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:30:16 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400047 2012-Feb-03 02:30:16 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:30:16 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Feb-03 02:30:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:30:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 02:30:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23417.00 2012-Feb-03 02:30:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:30:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.553 (still bad) 2012-Feb-03 02:30:19 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:30:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 02:30:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:30:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:30:22.01 2012-Feb-03 02:30:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328250622.01 Fri Feb 3 02:30:22 2012 2012-Feb-03 02:30:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314267 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:30:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:30:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 02:30:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2012-Feb-03 02:30:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:30:28 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:30:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:30:28 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:30:28 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 02:30:28 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 02:30:28 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 02:30:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:30:28 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 02:30:28 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 02:30:28 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 249.02 and ZA = 9.84 2012-Feb-03 02:30:28 LOG3 track_source: Calling 'track_source AGES1367_p2_007 249.02 9.8367650285 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:30:28 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:30:28 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_007} INFO {Slewing to source 'AGES1367_p2_007' ...} 2012-Feb-03 02:30:28 INFO1 track_source: Starting to track AGES1367_p2_007 2012-Feb-03 02:30:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_007" 2012-Feb-03 02:30:28 LOG3 vw_send: To DATATAKING: set ra 249.02 2012-Feb-03 02:30:28 LOG3 vw_send: To DATATAKING: set dec 9.8367650285 2012-Feb-03 02:30:28 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:30:28 LOG3 vw_send: To DATATAKING: pnt tr 249.02 9.8367650285 -CF 2012-Feb-03 02:30:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:30:28 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:30:28 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:30:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:30:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:30:28 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 LOG1 fixed_driftmap: Parameters: HA = -00:39:31.1 Start = 10:55:08.9 LST = 10:54:50.8 diff = 18.1 secs 2012-Feb-03 02:30:28 INFO2 fixed_driftmap: Waiting 16.1 seconds for RA 11:34:40 2012-Feb-03 02:30:28 INFO2 lstwait: Waiting for 16.1 secs from LST 10:54:51 to LST 10:55:07 ... 2012-Feb-03 02:30:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.05678631821274 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 02:30:28 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 02:30:28 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_007" 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: set ra 249.02 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: set dec 9.8367650285 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: vw% 249.02 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: vw% 9.8367650285 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: pnt tr 249.02 9.8367650285 -CF 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:30:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2012-Feb-03 02:30:44 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 02:30:44 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Feb-03 02:30:44 LOG4 lstwait: Finished waiting 0.95 seconds late 2012-Feb-03 02:30:44 INFO3 lstwait: Finished waiting 2012-Feb-03 02:30:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:30:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 02:30:44 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 02:30:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 02:30:44 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 02:30:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:30:44 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Feb-03 02:30:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 02:30:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_007 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: patternid=203400048 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: scanid=203400048 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314267.0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314267.0 2012-Feb-03 02:30:44 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:30:44 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:30:44 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_007:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400048:scanid=203400048:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314267.0:topobfreqhz=1306314267.0:filetype=1 2012-Feb-03 02:30:44 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:30:44 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Feb-03 02:30:44 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:30:44 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:30:44 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Feb-03 02:30:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:30:44 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:30:44 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 02:30:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:30:44 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Feb-03 02:30:44 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:30:44 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:30:44 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Feb-03 02:30:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:30:44 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400048 2012-Feb-03 02:30:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:30:45 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Feb-03 02:30:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:30:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:30:45 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:30:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 02:30:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23446.00 2012-Feb-03 02:30:46 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:30:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-03 02:30:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314267 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:30:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314267 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.123 (still bad) 2012-Feb-03 02:30:49 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:30:49.01 2012-Feb-03 02:30:49 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328250649.01 Fri Feb 3 02:30:49 2012 2012-Feb-03 02:30:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2012-Feb-03 02:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-03 02:31:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:31:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 1.037 1.126 1.124 2012-Feb-03 02:31:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.898 0.967 1.050 2012-Feb-03 02:31:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.106 0.919 1.072 2012-Feb-03 02:31:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.021 0.946 0.022 2012-Feb-03 02:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-03 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-03 02:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2012-Feb-03 02:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-03 02:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-03 02:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:32:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:32:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 1.033 1.124 1.126 2012-Feb-03 02:32:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.901 0.969 1.049 2012-Feb-03 02:32:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.099 0.915 1.068 2012-Feb-03 02:32:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.021 0.945 0.021 2012-Feb-03 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-03 02:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-03 02:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-03 02:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-03 02:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:33:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:33:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 1.036 1.125 1.131 2012-Feb-03 02:33:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.904 0.969 1.051 2012-Feb-03 02:33:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.099 0.918 1.072 2012-Feb-03 02:33:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.021 0.948 0.022 2012-Feb-03 02:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:34:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:34:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.033 1.128 1.133 2012-Feb-03 02:34:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.903 0.969 1.051 2012-Feb-03 02:34:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.100 0.913 1.065 2012-Feb-03 02:34:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.021 0.946 0.022 2012-Feb-03 02:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-03 02:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2012-Feb-03 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2012-Feb-03 02:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.124 (still bad) 2012-Feb-03 02:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:35:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:35:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 1.028 1.122 1.125 2012-Feb-03 02:35:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.901 0.967 1.050 2012-Feb-03 02:35:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 1.098 0.915 1.067 2012-Feb-03 02:35:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.086 0.021 0.944 0.021 2012-Feb-03 02:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 02:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-03 02:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:36:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:36:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.030 1.123 1.127 2012-Feb-03 02:36:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.902 0.969 1.050 2012-Feb-03 02:36:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.098 0.916 1.067 2012-Feb-03 02:36:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.020 0.945 0.021 2012-Feb-03 02:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-03 02:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:37:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:37:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 1.032 1.124 1.131 2012-Feb-03 02:37:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.901 0.968 1.053 2012-Feb-03 02:37:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.101 0.917 1.069 2012-Feb-03 02:37:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.021 0.943 0.022 2012-Feb-03 02:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-03 02:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-03 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:38:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:38:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.035 1.122 1.129 2012-Feb-03 02:38:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 0.903 0.970 1.054 2012-Feb-03 02:38:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.099 0.919 1.069 2012-Feb-03 02:38:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.020 0.945 0.021 2012-Feb-03 02:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 02:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2012-Feb-03 02:39:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-03 02:39:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.045 1.034 1.130 1.136 2012-Feb-03 02:39:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.902 0.969 1.053 2012-Feb-03 02:39:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.101 0.925 1.077 2012-Feb-03 02:39:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.022 0.947 0.022 2012-Feb-03 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2012-Feb-03 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-03 02:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-03 02:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Feb-03 02:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-03 02:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.155 (still bad) 2012-Feb-03 02:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.154 (still bad) 2012-Feb-03 02:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.153 (still bad) 2012-Feb-03 02:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.157 (still bad) 2012-Feb-03 02:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.155 (still bad) 2012-Feb-03 02:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.153 (still bad) 2012-Feb-03 02:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.157 (still bad) 2012-Feb-03 02:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2012-Feb-03 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-03 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-03 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Feb-03 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-03 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-03 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-03 02:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Feb-03 02:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Feb-03 02:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Feb-03 02:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-03 02:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Feb-03 02:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Feb-03 02:40:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:40:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 1.037 1.143 1.152 2012-Feb-03 02:40:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.901 0.969 1.052 2012-Feb-03 02:40:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.101 0.918 1.067 2012-Feb-03 02:40:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.021 0.947 0.021 2012-Feb-03 02:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.158 (still bad) 2012-Feb-03 02:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.154 (still bad) 2012-Feb-03 02:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Feb-03 02:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Feb-03 02:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Feb-03 02:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 02:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 02:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:41:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:41:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.033 1.124 1.129 2012-Feb-03 02:41:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.902 0.969 1.052 2012-Feb-03 02:41:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.099 0.917 1.068 2012-Feb-03 02:41:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.021 0.947 0.022 2012-Feb-03 02:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:42:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-03 02:42:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 1.033 1.122 1.128 2012-Feb-03 02:42:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.903 0.970 1.051 2012-Feb-03 02:42:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.100 0.918 1.068 2012-Feb-03 02:42:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.022 0.947 0.023 2012-Feb-03 02:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-03 02:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-03 02:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-03 02:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-03 02:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-03 02:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:43:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:43:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 1.036 1.128 1.132 2012-Feb-03 02:43:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.905 0.973 1.053 2012-Feb-03 02:43:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.102 0.918 1.069 2012-Feb-03 02:43:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.021 0.948 0.022 2012-Feb-03 02:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-03 02:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:44:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:44:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 1.037 1.125 1.130 2012-Feb-03 02:44:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.901 0.970 1.053 2012-Feb-03 02:44:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.101 0.918 1.067 2012-Feb-03 02:44:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.020 0.946 0.021 2012-Feb-03 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Feb-03 02:45:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:45:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.038 1.125 1.129 2012-Feb-03 02:45:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.905 0.972 1.055 2012-Feb-03 02:45:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.099 0.921 1.069 2012-Feb-03 02:45:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.021 0.948 0.022 2012-Feb-03 02:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-03 02:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 02:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 02:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 02:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-03 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Feb-03 02:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-03 02:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:46:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:46:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.038 1.124 1.131 2012-Feb-03 02:46:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 0.903 0.969 1.054 2012-Feb-03 02:46:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.102 0.921 1.069 2012-Feb-03 02:46:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.022 0.945 0.020 2012-Feb-03 02:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-03 02:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-03 02:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 02:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 02:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-03 02:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 02:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-03 02:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-03 02:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-03 02:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-03 02:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-03 02:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-03 02:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-03 02:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:47:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:47:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.041 1.127 1.132 2012-Feb-03 02:47:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.099 0.905 0.970 1.054 2012-Feb-03 02:47:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.102 0.923 1.071 2012-Feb-03 02:47:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.087 0.020 0.946 0.021 2012-Feb-03 02:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-03 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Feb-03 02:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-03 02:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 02:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 02:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 02:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Feb-03 02:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.130 (still bad) 2012-Feb-03 02:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-03 02:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-03 02:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:48:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:48:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 1.038 1.127 1.132 2012-Feb-03 02:48:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.908 0.973 1.057 2012-Feb-03 02:48:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.109 0.923 1.073 2012-Feb-03 02:48:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.020 0.950 0.020 2012-Feb-03 02:48:25 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:48:25.295 (seconds: 10105.295)!} 2012-Feb-03 02:48:25 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:48:25.295 (seconds: 10105.295)! 2012-Feb-03 02:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:48:26 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 10104.0 to 10105.0! 2012-Feb-03 02:48:27 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (10104.0 - 10106.0)! 2012-Feb-03 02:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-03 02:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 02:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2012-Feb-03 02:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-03 02:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Feb-03 02:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-03 02:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2012-Feb-03 02:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:49:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-03 02:49:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.038 1.129 1.136 2012-Feb-03 02:49:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.101 0.906 0.969 1.056 2012-Feb-03 02:49:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.109 0.923 1.072 2012-Feb-03 02:49:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.022 0.948 0.022 2012-Feb-03 02:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.135 (still bad) 2012-Feb-03 02:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-03 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-03 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2012-Feb-03 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Feb-03 02:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Feb-03 02:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2012-Feb-03 02:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.132 (still bad) 2012-Feb-03 02:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Feb-03 02:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.135 (still bad) 2012-Feb-03 02:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:50:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-03 02:50:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.038 1.127 1.131 2012-Feb-03 02:50:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.905 0.972 1.056 2012-Feb-03 02:50:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.101 0.921 1.071 2012-Feb-03 02:50:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.021 0.947 0.022 2012-Feb-03 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.136 (still bad) 2012-Feb-03 02:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.133 (still bad) 2012-Feb-03 02:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.132 (still bad) 2012-Feb-03 02:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-03 02:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.136 (still bad) 2012-Feb-03 02:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-03 02:50:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:50:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:50:50 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:50:50 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:50:50 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Feb-03 02:50:50 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:50:50 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Feb-03 02:50:50 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 02:50:50 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-03 02:50:50 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 02:50:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 02:50:50 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 02:50:50 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-03 02:50:50 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2012-Feb-03 02:50:50 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES1367_p2_009) < 111839 THEN' 2012-Feb-03 02:50:51 LOG3 is_if_valid: Current source data: up 234.0 5.6 UP - - 102 1.8 2012-Feb-03 02:50:51 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_009) < 111839 2012-Feb-03 02:50:51 INFO5 is_if_valid: Condition parsed as: 11.284490999999999 < 11.310833333333335 2012-Feb-03 02:50:51 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=228.86 alfaangle=-26.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_009 ra=113400.00 dec=213800.00' 2012-Feb-03 02:50:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 02:50:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 02:50:51 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 228.86 -26.7 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_009 113400.00 213800.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:50:51 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 02:50:52 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-03 02:50:52 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_007' 2012-Feb-03 02:50:52 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 02:50:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_009} 2012-Feb-03 02:50:52 INFO3 fixed_driftmap: Sending telescope to Az = 228.86 and ZA = 4.94 2012-Feb-03 02:50:52 LOG3 track_source: Calling 'track_source AGES1367_p2_009 228.86 4.9413788940 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:50:52 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:50:52 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-03 02:50:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_009} INFO {Slewing to source 'AGES1367_p2_009' ...} 2012-Feb-03 02:50:52 INFO1 track_source: Starting to track AGES1367_p2_009 2012-Feb-03 02:50:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_009" 2012-Feb-03 02:50:52 LOG3 vw_send: To DATATAKING: set ra 228.86 2012-Feb-03 02:50:52 LOG3 vw_send: To DATATAKING: set dec 4.9413788940 2012-Feb-03 02:50:52 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:50:52 LOG3 vw_send: To DATATAKING: pnt tr 228.86 4.9413788940 -CF 2012-Feb-03 02:50:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:50:52 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:50:52 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-03 02:50:52 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:50:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:50:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:50:52 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-03 02:50:52 START begin_task: Starting task 'rotate ALFA to -26.7 degrees' 2012-Feb-03 02:50:52 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-03 02:50:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -26.7 degrees ...} 2012-Feb-03 02:50:52 INFO2 rotate_alfa: ALFA commanded to -26.7 degrees 2012-Feb-03 02:50:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION -26.7 REPLY 2012-Feb-03 02:50:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 02:50:52 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 02:50:52 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_009" 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: set ra 228.86 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: set dec 4.9413788940 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: vw% 228.86 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: vw% 4.9413788940 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: pnt tr 228.86 4.9413788940 -CF 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:50:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-03 02:51:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 02:51:06 INFO3 alfa_motor: ALFA rotator in-position -26.70 degrees 2012-Feb-03 02:51:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 02:51:06 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Feb-03 02:51:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:51:06 STOP finish_task: Finishing task 'rotate ALFA to -26.7 degrees' 2012-Feb-03 02:51:06 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-03 02:51:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to -26.7 degrees 2012-Feb-03 02:51:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:51:06 STOP end_task: Finishing task 'rotate ALFA to -26.7 degrees' with status 'OK' 2012-Feb-03 02:51:06 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-03 02:51:06 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 02:51:06 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-03 02:51:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 02:51:07 LOG3 waittrk: Start waittrk 5 2012-Feb-03 02:51:07 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 02:51:07 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Feb-03 02:51:12 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 02:51:12 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Feb-03 02:51:12 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 02:51:12 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Feb-03 02:53:00 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 02:53:00 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Feb-03 02:53:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:53:00 INFO2 waittrk: Now tracking AGES1367_p2_009 2012-Feb-03 02:53:00 LOG4 waittrk: Current telescope position: Az = 228.25 ZA = 4.95 2012-Feb-03 02:53:00 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 02:53:00 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-03 02:53:00 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 02:53:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:00 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 02:53:00 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-03 02:53:00 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 02:53:00 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Feb-03 02:53:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 02:53:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 02:53:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:53:00 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 02:53:00 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Feb-03 02:53:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 02:53:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:01 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:53:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 02:53:01 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Feb-03 02:53:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 02:53:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:53:01 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 02:53:01 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:53:01 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Feb-03 02:53:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:01 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:53:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:53:01 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Feb-03 02:53:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:53:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 02:53:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:53:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:53:01 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:53:01 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Feb-03 02:53:01 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:53:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:53:01 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Feb-03 02:53:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:53:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:53:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 02:53:01 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Feb-03 02:53:01 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 02:53:01 INFO2 astwait: Waiting for 11 seconds from 06:53:01 to 06:53:12 UTC ... 2012-Feb-03 02:53:01 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 02:53:01 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 02:53:01 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 02:53:12 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 INFO3 astwait: Finished waiting 2012-Feb-03 02:53:12 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:53:12 LOG5 dopset_later: Calling 'dopset_later 61.368299357006144' 2012-Feb-03 02:53:12 INFO3 dopset_later: Setting Doppler correction for 02:54:12 (61.4 seconds from now) 2012-Feb-03 02:53:12 LOG5 antvel: Calling 'antvel 228.860000 4.941379 F Heliocentric 61.368299357006144' 2012-Feb-03 02:53:12 LOG2 antvel: Transforming current Az = 228.86 ZA = 4.94 to apparent RA = 11:34:39.8 Dec = +21:33:41.5 2012-Feb-03 02:53:12 LOG2 antvel: Parameters to Doppler: Heliocentric 24852 2012 34 0.0 2012-Feb-03 02:53:12 INFO5 antvel: Computed antenna velocity: -15.33861 km/s 2012-Feb-03 02:53:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-15.3386101544 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 02:53:12 INFO4 dopset_gen: New sky frequencies: 1381.314102 1381.314102 1381.314102 1381.314102 1381.314102 1381.314102 1381.314102 1381.314102 1381.314102 2012-Feb-03 02:53:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.314102 sky0=1381.314102 sky1=1381.314102 sky2=1381.314102 sky3=1381.314102 sky4=1381.314102 sky5=1381.314102 sky6=1381.314102 sky7=1381.314102 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 02:53:12 LOG2 dopset_gen: Result from 'sky2syn': 1631.314102 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631314102.0} 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 02:53:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 02:53:12 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 02:53:12 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.5 Dec = +21:37:42.2 2012-Feb-03 02:53:12 LOG3 track_source: Calling 'track_source AGES1367_p2_009 113303.5 213742.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:53:12 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:53:12 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_009} INFO {Slewing to source 'AGES1367_p2_009' ...} 2012-Feb-03 02:53:12 INFO1 track_source: Starting to track AGES1367_p2_009 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_009" 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: set ra 113303.5 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: set dec 213742.2 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: pnt tr 113303.5 213742.2 -CJ 2012-Feb-03 02:53:12 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:53:12 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:53:12 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:53:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:12 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:53:12 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 02:53:12 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 02:53:12 LOG3 waittrk: Start waittrk 5 2012-Feb-03 02:53:12 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 02:53:12 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631314102.0} 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_009" 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: set ra 113303.5 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: set dec 213742.2 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.5 213742.2 -CJ 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: 113303.5 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: vw% 213742.2 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:53:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:17 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 02:53:17 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Feb-03 02:53:17 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 02:53:17 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-03 02:53:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 02:53:24 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-03 02:53:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:53:24 INFO2 waittrk: Now tracking AGES1367_p2_009 2012-Feb-03 02:53:24 LOG4 waittrk: Current telescope position: Az = 228.03 ZA = 4.92 2012-Feb-03 02:53:24 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 02:53:24 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-03 02:53:24 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 02:53:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 02:53:24 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-03 02:53:24 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 02:53:24 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-03 02:53:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 02:53:24 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 02:53:24 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 02:53:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 02:53:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:53:24 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 02:53:24 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-03 02:53:24 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 02:53:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:53:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:27 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:53:27 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 02:53:27 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-03 02:53:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 02:53:27 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 02:53:27 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-03 02:53:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 02:53:27 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:53:27 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:53:27 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:53:27 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 02:53:27 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 02:53:27 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-03 02:53:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 02:53:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:28 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2012-Feb-03 02:53:28 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-03 02:53:28 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-03 02:53:28 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-03 02:53:28 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 02:53:28 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 02:53:28 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-03 02:53:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.019 1.018 ALFA beam 1: 1.088 1.115 2012-Feb-03 02:53:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.085 1.101 ALFA beam 3: 0.959 1.044 2012-Feb-03 02:53:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.772 1.088 ALFA beam 5: 1.094 1.017 2012-Feb-03 02:53:28 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.030 0.014 ALFA beam 7: 0.896 0.014 2012-Feb-03 02:53:28 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 02:53:28 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-03 02:53:28 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 02:53:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:28 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 02:53:28 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-03 02:53:28 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 02:53:28 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-03 02:53:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 02:53:28 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 02:53:28 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 02:53:28 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 02:53:28 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-03 02:53:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 02:53:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 1.018 1.088 1.115 2012-Feb-03 02:53:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.101 0.959 1.044 2012-Feb-03 02:53:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.088 1.094 1.017 2012-Feb-03 02:53:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.014 0.896 0.014 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.3 26.7 B 29.5 29.6 mn:A 0.0 -0.1 B -0.3 -0.3 gn: 11 11 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.6 29.3 B 27.4 29.0 mn:A -0.1 -0.5 B -0.7 0.1 gn: 12 11 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.7 27.8 B 32.3 28.1 mn:A 0.3 0.7 B 0.1 -0.1 gn: 7 11 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.3 27.0 B 27.3 27.3 mn:A -0.5 -0.4 B 0.5 0.2 gn: 8 9 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.5 30.6 B 30.2 31.6 mn:A 0.0 -0.3 B 0.3 0.0 gn: 11 12 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.8 29.1 B 31.0 28.8 mn:A 0.3 -0.2 B -0.0 0.2 gn: 11 12 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.1 30.9 B 30.2 26.9 mn:A 0.4 -0.3 B -0.0 -0.2 gn: 13 12 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b3s1g0 rms:A 28.9 28.2 B 28.5 29.8 mn:A -0.2 0.4 B 0.3 0.1 gn: 12 12 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.2 28.4 B 31.9 32.0 mn:A -0.3 -0.3 B -0.5 -0.0 gn: 13 12 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.2 28.2 B 30.4 29.3 mn:A 0.0 0.0 B -0.3 0.3 gn: 16 13 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.4 30.3 B 29.3 29.3 mn:A 0.7 0.6 B 0.1 0.6 gn: 13 11 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.2 28.0 B 29.6 29.3 mn:A -0.4 0.2 B -0.0 0.2 gn: 12 11 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.6 28.9 B 14.1 14.5 mn:A -0.4 0.2 B 0.4 -0.3 gn: 13 31 2012-Feb-03 02:53:33 INFO3 from_mock: From MOCK: b6s1g0 rms:A 28.7 26.0 B 11.1 10.8 mn:A 0.7 0.5 B 0.1 0.2 gn: 13 31 2012-Feb-03 02:53:33 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 02:53:33 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 02:53:34 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 02:53:34 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 02:53:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:34 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 02:53:34 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 02:53:34 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 02:53:34 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 02:53:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:34 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 02:53:34 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 02:53:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 02:53:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 02:53:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 02:53:34 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 02:53:34 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 02:53:34 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 02:53:34 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 02:53:34 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 02:53:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 02:53:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:53:34 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 02:53:34 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 02:53:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 02:53:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 02:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:34 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 02:53:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 02:53:34 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 02:53:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:53:34 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 02:53:34 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:53:34 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Feb-03 02:53:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:35 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:53:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:53:35 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:53:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 02:53:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 02:53:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:53:35 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 02:53:35 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0004.fits 2012-Feb-03 02:53:35 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 02:53:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 02:53:35 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 02:53:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 02:53:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 02:53:35 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 02:53:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 02:53:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 02:53:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 02:53:35 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120203.a2048.0004.fits} 2012-Feb-03 02:53:35 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 02:53:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 02:53:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 02:53:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 02:53:35 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 02:53:35 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:53:35 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 02:53:35 LOG5 log_alfabeam: Parameters: 11.550972222222223 21.628388888888892 11.300450 2012.093416926509 -26.700064 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 0 11.550972222222223 21.628388888888896 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 1 11.551249436370323 21.532569818244085 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 2 11.557383204804117 21.596180830736159 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 3 11.557040890282767 21.693282430945953 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 4 11.550544415779299 21.724827357774760 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 5 11.544558394713933 21.658440428493748 2012-Feb-03 02:53:35 LOG4 log_alfabeam: ALFABEAM 6 11.544919341468251 21.563267856464442 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_009 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: patternid=203400048 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: scanid=203400049 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314102.0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314102.0 2012-Feb-03 02:53:35 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:53:35 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:53:35 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_009:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400048:scanid=203400049:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314102.0:topobfreqhz=1306314102.0:filetype=1 2012-Feb-03 02:53:35 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:53:35 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:53:35 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:53:35 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:53:35 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:53:35 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 02:53:35 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:53:35 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:53:35 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:53:35 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:53:35 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400049 2012-Feb-03 02:53:35 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:53:35 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2012-Feb-03 02:53:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:53:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:53:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 02:53:35 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:53:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24816.00 2012-Feb-03 02:53:37 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:53:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 02:53:37 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:37 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:40 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:53:40.01 2012-Feb-03 02:53:40 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328252020.01 Fri Feb 3 02:53:40 2012 2012-Feb-03 02:53:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314102 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:53:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:53:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.568 (still bad) 2012-Feb-03 02:53:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:53:46 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:53:46 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:53:46 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:53:46 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 02:53:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 02:53:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 02:53:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 02:53:46 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 02:53:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 02:53:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 02:53:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 02:53:46 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 02:53:46 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:53:46 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 02:53:46 LOG5 log_alfabeam: Parameters: 11.550972222222223 21.628388888888892 11.303514 2012.0934172750779 -26.700064 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 0 11.550972222222221 21.628388888888885 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 1 11.551290087534031 21.532596842501487 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 2 11.557396937577659 21.596710102556624 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 3 11.557012921203070 21.693787842066619 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 4 11.550502434313220 21.724791818688420 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 5 11.544545612581327 21.657896820809739 2012-Feb-03 02:53:46 LOG4 log_alfabeam: ALFABEAM 6 11.544947473908957 21.562762576270078 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_009 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: patternid=203400048 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: scanid=203400050 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314102.0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314102.0 2012-Feb-03 02:53:46 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:53:46 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:53:46 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_009:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400048:scanid=203400050:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314102.0:topobfreqhz=1306314102.0:filetype=1 2012-Feb-03 02:53:46 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:53:46 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:53:46 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:53:46 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:53:46 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:53:46 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 02:53:46 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:53:46 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:53:46 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:53:46 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:53:46 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400050 2012-Feb-03 02:53:46 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:53:46 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-03 02:53:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:53:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 02:53:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24827.00 2012-Feb-03 02:53:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:53:47 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.568 (still bad) 2012-Feb-03 02:53:49 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:53:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 02:53:49 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:49 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 02:53:52 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:53:52.02 2012-Feb-03 02:53:52 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328252032.02 Fri Feb 3 02:53:52 2012 2012-Feb-03 02:53:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314102 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:53:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:53:52 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 02:53:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 02:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Feb-03 02:53:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 02:53:58 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 02:53:58 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 02:53:58 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 02:53:58 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 02:53:58 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 02:53:58 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 02:53:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:58 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 02:53:58 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 02:53:58 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 228.86 and ZA = 4.94 2012-Feb-03 02:53:58 LOG3 track_source: Calling 'track_source AGES1367_p2_009 228.86 4.9413788940 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 02:53:58 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 02:53:58 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_009} INFO {Slewing to source 'AGES1367_p2_009' ...} 2012-Feb-03 02:53:58 INFO1 track_source: Starting to track AGES1367_p2_009 2012-Feb-03 02:53:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_009" 2012-Feb-03 02:53:58 LOG3 vw_send: To DATATAKING: set ra 228.86 2012-Feb-03 02:53:58 LOG3 vw_send: To DATATAKING: set dec 4.9413788940 2012-Feb-03 02:53:58 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 02:53:58 LOG3 vw_send: To DATATAKING: pnt tr 228.86 4.9413788940 -CF 2012-Feb-03 02:53:58 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:53:58 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 02:53:58 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 02:53:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 02:53:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 02:53:58 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 LOG1 fixed_driftmap: Parameters: HA = -00:15:59.9 Start = 11:18:40.1 LST = 11:18:24.7 diff = 15.4 secs 2012-Feb-03 02:53:58 INFO2 fixed_driftmap: Waiting 13.4 seconds for RA 11:34:40 2012-Feb-03 02:53:58 INFO2 lstwait: Waiting for 13.4 secs from LST 11:18:25 to LST 11:18:38 ... 2012-Feb-03 02:53:58 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.372904771727562 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 02:53:58 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 02:53:58 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_009" 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: set ra 228.86 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: set dec 4.9413788940 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: vw% 228.86 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: vw% 4.9413788940 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: pnt tr 228.86 4.9413788940 -CF 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 02:53:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 02:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Feb-03 02:54:11 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 02:54:11 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Feb-03 02:54:11 LOG4 lstwait: Finished waiting 0.63 seconds late 2012-Feb-03 02:54:11 INFO3 lstwait: Finished waiting 2012-Feb-03 02:54:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 02:54:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 02:54:11 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 02:54:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 02:54:11 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 02:54:11 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 02:54:11 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2012-Feb-03 02:54:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 02:54:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_009 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: patternid=203400051 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: scanid=203400051 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456314102.0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306314102.0 2012-Feb-03 02:54:11 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 02:54:11 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 02:54:11 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_009:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400051:scanid=203400051:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456314102.0:topobfreqhz=1306314102.0:filetype=1 2012-Feb-03 02:54:11 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 02:54:11 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Feb-03 02:54:12 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 02:54:12 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 02:54:12 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Feb-03 02:54:12 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 02:54:12 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 02:54:12 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 02:54:12 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 02:54:12 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Feb-03 02:54:12 LOG4 from_mock: From MOCK: starok 2012-Feb-03 02:54:12 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 02:54:12 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Feb-03 02:54:12 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 02:54:12 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400051 2012-Feb-03 02:54:12 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 02:54:12 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-03 02:54:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 02:54:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 02:54:12 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 02:54:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 02:54:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24853.00 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.314102 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 02:54:14 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 02:54:14 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-03 02:54:14 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 02:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.314102 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 02:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2012-Feb-03 02:54:17 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:54:17.01 2012-Feb-03 02:54:17 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328252057.01 Fri Feb 3 02:54:17 2012 2012-Feb-03 02:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-03 02:54:17 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 02:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Feb-03 02:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-03 02:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-03 02:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 02:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 02:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.127 (still bad) 2012-Feb-03 02:54:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 02:54:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 1.015 1.087 1.112 2012-Feb-03 02:54:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.121 0.957 1.042 2012-Feb-03 02:54:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.086 1.092 1.016 2012-Feb-03 02:54:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.014 0.896 0.020 2012-Feb-03 02:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 02:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.122 (still bad) 2012-Feb-03 02:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 02:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Feb-03 02:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 02:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 02:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 02:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 02:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 02:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-03 02:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 02:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 02:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 02:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:55:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 02:55:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.014 1.083 1.112 2012-Feb-03 02:55:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.123 0.957 1.040 2012-Feb-03 02:55:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.082 1.092 1.013 2012-Feb-03 02:55:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.019 0.896 0.020 2012-Feb-03 02:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 02:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 02:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 02:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 02:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 02:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-03 02:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-03 02:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Feb-03 02:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-03 02:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-03 02:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-03 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-03 02:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 02:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-03 02:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 02:56:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 02:56:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.022 1.088 1.119 2012-Feb-03 02:56:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.125 0.958 1.046 2012-Feb-03 02:56:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.087 1.096 1.017 2012-Feb-03 02:56:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.019 0.900 0.020 2012-Feb-03 02:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 02:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 02:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-03 02:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 02:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 02:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-03 02:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 02:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 02:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 02:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 02:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 02:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 02:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:57:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:57:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 1.015 1.085 1.113 2012-Feb-03 02:57:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.118 0.957 1.042 2012-Feb-03 02:57:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.084 1.093 1.013 2012-Feb-03 02:57:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.020 0.894 0.021 2012-Feb-03 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 02:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 02:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 02:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 02:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 02:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 02:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:58:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 1.010 1.085 1.112 2012-Feb-03 02:58:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 1.118 0.956 1.041 2012-Feb-03 02:58:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.085 1.092 1.012 2012-Feb-03 02:58:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.020 0.896 0.021 2012-Feb-03 02:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 02:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 02:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 02:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 02:59:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 02:59:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.013 1.086 1.111 2012-Feb-03 02:59:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 1.117 0.955 1.039 2012-Feb-03 02:59:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 1.083 1.089 1.012 2012-Feb-03 02:59:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.020 0.896 0.021 2012-Feb-03 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 02:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-03 02:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 02:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 02:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 02:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 03:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:00:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:00:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.013 1.088 1.114 2012-Feb-03 03:00:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.117 0.957 1.042 2012-Feb-03 03:00:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.083 1.094 1.012 2012-Feb-03 03:00:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.020 0.894 0.020 2012-Feb-03 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:01:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.014 1.087 1.112 2012-Feb-03 03:01:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 1.120 0.961 1.044 2012-Feb-03 03:01:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.084 1.092 1.012 2012-Feb-03 03:01:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.020 0.898 0.020 2012-Feb-03 03:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:01:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): ADC >= 4096 errors PFB = 8-15 errors 2012-Feb-03 03:01:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): ADC = 2048-4095 errors PFB = 8-15 errors 2012-Feb-03 03:01:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): ADC >= 4096 errors PFB = 16-31 errors 2012-Feb-03 03:01:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): ADC >= 4096 errors PFB = 2-3 errors 2012-Feb-03 03:01:55 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): ADC >= 4096 errors PFB = 16-31 errors 2012-Feb-03 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-03 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:02:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:02:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.014 1.102 1.128 2012-Feb-03 03:02:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 1.130 0.965 1.048 2012-Feb-03 03:02:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.090 1.101 1.022 2012-Feb-03 03:02:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.020 0.902 0.020 2012-Feb-03 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-03 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Feb-03 03:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.150 (still bad) 2012-Feb-03 03:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2012-Feb-03 03:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-03 03:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2012-Feb-03 03:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 03:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 03:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-03 03:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-03 03:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Feb-03 03:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2012-Feb-03 03:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Feb-03 03:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-03 03:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-03 03:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-03 03:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 03:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-03 03:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 03:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.135 (still bad) 2012-Feb-03 03:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-03 03:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-03 03:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-03 03:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-03 03:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-03 03:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 03:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:03:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 03:03:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 1.021 1.102 1.128 2012-Feb-03 03:03:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.124 0.964 1.048 2012-Feb-03 03:03:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.091 1.097 1.016 2012-Feb-03 03:03:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.019 0.927 0.020 2012-Feb-03 03:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 03:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-03 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 03:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-03 03:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 03:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:04:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:04:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 1.016 1.102 1.125 2012-Feb-03 03:04:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 1.122 0.961 1.044 2012-Feb-03 03:04:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.093 1.102 1.020 2012-Feb-03 03:04:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.020 0.899 0.020 2012-Feb-03 03:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:05:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:05:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 1.016 1.089 1.115 2012-Feb-03 03:05:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.123 0.961 1.043 2012-Feb-03 03:05:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.087 1.098 1.014 2012-Feb-03 03:05:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.020 0.899 0.021 2012-Feb-03 03:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-03 03:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-03 03:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-03 03:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-03 03:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-03 03:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-03 03:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-03 03:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-03 03:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:06:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:06:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 1.017 1.089 1.115 2012-Feb-03 03:06:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.116 0.961 1.042 2012-Feb-03 03:06:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.085 1.092 1.014 2012-Feb-03 03:06:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.020 0.898 0.021 2012-Feb-03 03:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 03:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-03 03:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:07:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 03:07:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.018 1.089 1.113 2012-Feb-03 03:07:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 1.121 0.961 1.044 2012-Feb-03 03:07:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.085 1.097 1.015 2012-Feb-03 03:07:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.020 0.898 0.019 2012-Feb-03 03:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 03:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:08:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 1.018 1.087 1.114 2012-Feb-03 03:08:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 1.117 0.963 1.046 2012-Feb-03 03:08:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.087 1.099 1.018 2012-Feb-03 03:08:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.044 0.020 0.905 0.020 2012-Feb-03 03:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-03 03:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-03 03:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 03:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-03 03:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-03 03:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-03 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 03:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:09:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 8-15 errors 2012-Feb-03 03:09:42 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 4-7 errors 2012-Feb-03 03:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-03 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:09:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 03:09:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 1.020 1.086 1.113 2012-Feb-03 03:09:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 1.117 0.961 1.045 2012-Feb-03 03:09:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.085 1.092 1.016 2012-Feb-03 03:09:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.020 0.896 0.019 2012-Feb-03 03:09:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Feb-03 03:09:54 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2012-Feb-03 03:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 03:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-03 03:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 03:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:10:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2012-Feb-03 03:10:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 64-127 errors 2012-Feb-03 03:10:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 16-31 errors 2012-Feb-03 03:10:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Feb-03 03:10:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 8-15 errors 2012-Feb-03 03:10:18 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 32-63 errors 2012-Feb-03 03:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 03:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-03 03:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:10:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 2-3 errors 2012-Feb-03 03:10:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Feb-03 03:10:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Feb-03 03:10:30 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 4-7 errors 2012-Feb-03 03:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-03 03:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-03 03:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-03 03:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-03 03:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-03 03:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-03 03:10:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 03:10:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 1.020 1.089 1.115 2012-Feb-03 03:10:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.123 0.960 1.045 2012-Feb-03 03:10:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.108 1.098 1.018 2012-Feb-03 03:10:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.020 0.897 0.019 2012-Feb-03 03:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 03:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-03 03:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-03 03:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:11:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:11:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.020 1.091 1.118 2012-Feb-03 03:11:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 1.121 0.963 1.046 2012-Feb-03 03:11:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.091 1.096 1.018 2012-Feb-03 03:11:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.020 0.901 0.021 2012-Feb-03 03:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-03 03:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-03 03:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-03 03:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:12:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-03 03:12:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.023 1.096 1.125 2012-Feb-03 03:12:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.120 0.971 1.055 2012-Feb-03 03:12:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.092 1.100 1.020 2012-Feb-03 03:12:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.020 0.905 0.020 2012-Feb-03 03:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-03 03:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-03 03:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-03 03:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-03 03:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-03 03:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-03 03:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-03 03:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-03 03:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-03 03:13:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-03 03:13:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.020 1.090 1.115 2012-Feb-03 03:13:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 1.120 0.965 1.049 2012-Feb-03 03:13:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.088 1.095 1.018 2012-Feb-03 03:13:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.020 0.900 0.019 2012-Feb-03 03:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-03 03:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-03 03:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-03 03:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-03 03:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-03 03:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-03 03:14:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 03:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-03 03:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-03 03:14:18 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 03:14:18 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 03:14:18 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 03:14:18 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-03 03:14:18 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 03:14:18 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2012-Feb-03 03:14:18 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 03:14:18 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-03 03:14:18 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 03:14:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 03:14:18 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 03:14:18 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-03 03:14:18 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2012-Feb-03 03:14:18 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES1367_p2_011) < 114439 THEN' 2012-Feb-03 03:14:19 LOG3 is_if_valid: Current source data: up 162.9 3.3 UP - - 78 2.7 2012-Feb-03 03:14:19 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_011) < 114439 2012-Feb-03 03:14:19 INFO5 is_if_valid: Condition parsed as: 11.691673 < 11.744166666666667 2012-Feb-03 03:14:19 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=143.76 alfaangle=52.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_011 ra=113400.00 dec=213500.00' 2012-Feb-03 03:14:19 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 03:14:19 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 03:14:19 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 143.76 52.1 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_011 113400.00 213500.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:14:19 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 03:14:20 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-03 03:14:20 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_009' 2012-Feb-03 03:14:20 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 03:14:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_011} 2012-Feb-03 03:14:20 INFO3 fixed_driftmap: Sending telescope to Az = 143.76 and ZA = 3.94 2012-Feb-03 03:14:20 LOG3 track_source: Calling 'track_source AGES1367_p2_011 143.76 3.9360272431 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:14:20 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 03:14:20 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-03 03:14:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_011} INFO {Slewing to source 'AGES1367_p2_011' ...} 2012-Feb-03 03:14:20 INFO1 track_source: Starting to track AGES1367_p2_011 2012-Feb-03 03:14:20 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_011" 2012-Feb-03 03:14:20 LOG3 vw_send: To DATATAKING: set ra 143.76 2012-Feb-03 03:14:20 LOG3 vw_send: To DATATAKING: set dec 3.9360272431 2012-Feb-03 03:14:20 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 03:14:20 LOG3 vw_send: To DATATAKING: pnt tr 143.76 3.9360272431 -CF 2012-Feb-03 03:14:20 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:14:20 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 03:14:20 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-03 03:14:20 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 03:14:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:14:20 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 03:14:20 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-03 03:14:20 START begin_task: Starting task 'rotate ALFA to +52.1 degrees' 2012-Feb-03 03:14:20 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-03 03:14:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +52.1 degrees ...} 2012-Feb-03 03:14:20 INFO2 rotate_alfa: ALFA commanded to +52.1 degrees 2012-Feb-03 03:14:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 52.1 REPLY 2012-Feb-03 03:14:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 03:14:20 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 03:14:20 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_011" 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: set ra 143.76 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: set dec 3.9360272431 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: vw% 143.76 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: vw% 3.9360272431 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: pnt tr 143.76 3.9360272431 -CF 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:14:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-03 03:15:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 03:15:04 INFO3 alfa_motor: ALFA rotator in-position +52.10 degrees 2012-Feb-03 03:15:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 03:15:04 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-03 03:15:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:15:04 STOP finish_task: Finishing task 'rotate ALFA to +52.1 degrees' 2012-Feb-03 03:15:04 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-03 03:15:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to +52.1 degrees 2012-Feb-03 03:15:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:15:04 STOP end_task: Finishing task 'rotate ALFA to +52.1 degrees' with status 'OK' 2012-Feb-03 03:15:04 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-03 03:15:04 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 03:15:04 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-03 03:15:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 03:15:04 LOG3 waittrk: Start waittrk 5 2012-Feb-03 03:15:04 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 03:15:04 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Feb-03 03:15:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 03:15:09 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Feb-03 03:15:09 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 03:15:09 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Feb-03 03:17:56 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 03:17:56 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Feb-03 03:17:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:17:56 INFO2 waittrk: Now tracking AGES1367_p2_011 2012-Feb-03 03:17:56 LOG4 waittrk: Current telescope position: Az = 143.46 ZA = 3.94 2012-Feb-03 03:17:56 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 03:17:56 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-03 03:17:56 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 03:17:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:17:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 03:17:56 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-03 03:17:56 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 03:17:56 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Feb-03 03:17:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 03:17:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 03:17:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:17:56 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 03:17:56 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Feb-03 03:17:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 03:17:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:17:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:17:57 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 03:17:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 03:17:57 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Feb-03 03:17:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 03:17:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:17:57 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 03:17:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:17:57 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Feb-03 03:17:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:17:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:17:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:17:57 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Feb-03 03:17:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:17:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 03:17:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:17:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:17:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:17:57 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2012-Feb-03 03:17:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:17:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:17:57 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2012-Feb-03 03:17:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:17:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:17:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 03:17:57 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Feb-03 03:17:57 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 03:17:57 INFO2 astwait: Waiting for 71 seconds from 07:17:57 to 07:19:08 UTC ... 2012-Feb-03 03:17:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 71 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 03:17:57 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 03:17:57 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-03 03:18:23 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:18:23.308 (seconds: 11903.308)!} 2012-Feb-03 03:18:23 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:18:23.308 (seconds: 11903.308)! 2012-Feb-03 03:19:08 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 03:19:08 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-03 03:19:08 INFO3 astwait: Finished waiting 2012-Feb-03 03:19:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:19:08 LOG5 dopset_later: Calling 'dopset_later 61.001376027396084' 2012-Feb-03 03:19:08 INFO3 dopset_later: Setting Doppler correction for 03:20:08 (61 seconds from now) 2012-Feb-03 03:19:08 LOG5 antvel: Calling 'antvel 143.760000 3.936027 F Heliocentric 61.001376027396084' 2012-Feb-03 03:19:08 LOG2 antvel: Transforming current Az = 143.76 ZA = 3.94 to apparent RA = 11:34:39.8 Dec = +21:30:41.5 2012-Feb-03 03:19:08 LOG2 antvel: Parameters to Doppler: Heliocentric 26408 2012 34 0.0 2012-Feb-03 03:19:08 INFO5 antvel: Computed antenna velocity: -15.29732 km/s 2012-Feb-03 03:19:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-15.2973182243 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 03:19:08 INFO4 dopset_gen: New sky frequencies: 1381.313912 1381.313912 1381.313912 1381.313912 1381.313912 1381.313912 1381.313912 1381.313912 1381.313912 2012-Feb-03 03:19:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.313912 sky0=1381.313912 sky1=1381.313912 sky2=1381.313912 sky3=1381.313912 sky4=1381.313912 sky5=1381.313912 sky6=1381.313912 sky7=1381.313912 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 03:19:08 LOG2 dopset_gen: Result from 'sky2syn': 1631.313912 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631313912.0} 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 03:19:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 03:19:08 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 03:19:08 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.9 Dec = +21:34:42.3 2012-Feb-03 03:19:08 LOG3 track_source: Calling 'track_source AGES1367_p2_011 113303.9 213442.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:19:08 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 03:19:08 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-03 03:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_011} INFO {Slewing to source 'AGES1367_p2_011' ...} 2012-Feb-03 03:19:08 INFO1 track_source: Starting to track AGES1367_p2_011 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_011" 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: set ra 113303.9 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: set dec 213442.3 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: pnt tr 113303.9 213442.3 -CJ 2012-Feb-03 03:19:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:19:08 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 03:19:08 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-03 03:19:08 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 03:19:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 03:19:08 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-03 03:19:08 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 03:19:08 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-03 03:19:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 03:19:08 LOG3 waittrk: Start waittrk 5 2012-Feb-03 03:19:08 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 03:19:08 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631313912.0} 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_011" 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: set ra 113303.9 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: set dec 213442.3 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: vw% 113303.9 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: vw% 213442.3 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.9 213442.3 -CJ 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:19:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 03:19:13 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Feb-03 03:19:13 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 03:19:13 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-03 03:19:15 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 03:19:15 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-03 03:19:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:19:15 INFO2 waittrk: Now tracking AGES1367_p2_011 2012-Feb-03 03:19:15 LOG4 waittrk: Current telescope position: Az = 143.24 ZA = 3.95 2012-Feb-03 03:19:15 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 03:19:15 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-03 03:19:15 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 03:19:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:15 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 03:19:15 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-03 03:19:15 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 03:19:15 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-03 03:19:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 03:19:15 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 03:19:15 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 03:19:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 03:19:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:19:15 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 03:19:15 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-03 03:19:15 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 03:19:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:19:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:18 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 03:19:18 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 03:19:18 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-03 03:19:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 03:19:18 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 03:19:18 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-03 03:19:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 03:19:18 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:19:18 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:19:18 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:19:18 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:19:18 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 03:19:18 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-03 03:19:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 03:19:19 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-03 03:19:19 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-03 03:19:19 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Feb-03 03:19:19 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-03 03:19:19 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 03:19:19 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 03:19:19 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-03 03:19:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.995 1.033 ALFA beam 1: 1.071 0.899 2012-Feb-03 03:19:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.095 0.882 ALFA beam 3: 0.956 1.041 2012-Feb-03 03:19:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.778 1.096 ALFA beam 5: 1.071 1.016 2012-Feb-03 03:19:19 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.986 0.014 ALFA beam 7: 1.070 0.014 2012-Feb-03 03:19:19 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 03:19:19 LOG5 finish_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-03 03:19:19 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 03:19:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:19 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 03:19:19 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-03 03:19:19 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 03:19:19 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-03 03:19:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 03:19:19 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 03:19:19 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 03:19:19 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 03:19:19 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-03 03:19:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:19:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.033 1.071 0.899 2012-Feb-03 03:19:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.882 0.956 1.041 2012-Feb-03 03:19:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.096 1.071 1.016 2012-Feb-03 03:19:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.070 0.014 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b0s0g0 rms:A 33.8 29.6 B 29.8 29.8 mn:A 0.1 0.1 B -0.1 -0.4 gn: 12 11 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.2 28.9 B 27.6 29.2 mn:A 0.0 -0.5 B -0.7 0.1 gn: 12 11 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.4 27.5 B 32.6 28.3 mn:A 0.3 0.6 B 0.1 -0.1 gn: 7 11 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.6 30.0 B 30.9 30.9 mn:A -0.5 -0.4 B 0.6 0.3 gn: 9 10 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.6 30.6 B 30.6 31.9 mn:A 0.1 -0.3 B 0.4 0.2 gn: 11 12 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.8 29.1 B 31.3 29.1 mn:A 0.3 -0.2 B -0.0 0.2 gn: 11 12 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.1 30.8 B 30.1 26.9 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b3s1g0 rms:A 28.9 28.2 B 28.6 29.8 mn:A -0.2 0.3 B 0.3 0.3 gn: 12 12 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.2 28.4 B 28.3 28.4 mn:A -0.3 -0.3 B -0.4 0.0 gn: 13 11 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.2 28.2 B 30.7 29.6 mn:A 0.1 0.1 B -0.3 0.3 gn: 16 13 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.9 29.8 B 29.2 29.2 mn:A 0.7 0.6 B 0.1 0.8 gn: 13 11 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.3 31.1 B 29.5 29.2 mn:A -0.2 0.3 B 0.0 0.2 gn: 13 11 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.8 28.2 B 14.1 14.5 mn:A -0.4 0.3 B 0.5 -0.3 gn: 13 31 2012-Feb-03 03:19:25 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.4 28.5 B 11.1 10.8 mn:A 0.6 0.5 B 0.2 0.2 gn: 14 31 2012-Feb-03 03:19:25 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 03:19:25 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 03:19:25 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 03:19:25 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 03:19:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:25 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 03:19:25 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 03:19:25 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 03:19:25 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 03:19:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:25 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 03:19:25 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 03:19:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 03:19:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 03:19:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 03:19:25 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 03:19:25 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 03:19:25 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 03:19:25 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 03:19:25 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 03:19:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 03:19:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:19:25 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 03:19:25 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 03:19:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 03:19:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:25 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 03:19:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 03:19:25 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 03:19:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:19:25 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 03:19:25 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:19:25 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Feb-03 03:19:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0005.fits 2012-Feb-03 03:19:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120203.a2048.0005.fits} 2012-Feb-03 03:19:26 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:19:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 03:19:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:19:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:19:26 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:19:26 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:19:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:19:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 03:19:26 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 03:19:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 03:19:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 03:19:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 03:19:26 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 03:19:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 03:19:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 03:19:26 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 03:19:26 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 03:19:26 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 03:19:26 LOG5 log_alfabeam: Parameters: 11.551083333333333 21.578416666666662 11.732741 2012.0934661064211 52.099983 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333352 21.578416666666662 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 1 11.553536024054754 21.479676870829639 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 2 11.557912234121735 21.545324218605117 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 3 11.555630430293245 21.644906420886983 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 4 11.548737111203806 21.677961728608771 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 5 11.544151783610790 21.609363256548239 2012-Feb-03 03:19:26 LOG4 log_alfabeam: ALFABEAM 6 11.546668715190947 21.510682764443359 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_011 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: patternid=203400051 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: scanid=203400052 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456313912.0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306313912.0 2012-Feb-03 03:19:26 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 03:19:26 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 03:19:26 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_011:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400051:scanid=203400052:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456313912.0:topobfreqhz=1306313912.0:filetype=1 2012-Feb-03 03:19:26 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 03:19:26 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 03:19:26 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 03:19:26 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 03:19:26 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 03:19:26 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG4 from_mock: From MOCK: starok 2012-Feb-03 03:19:26 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 03:19:26 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Feb-03 03:19:26 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 03:19:26 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400052 2012-Feb-03 03:19:27 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 03:19:27 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2012-Feb-03 03:19:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 03:19:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 03:19:27 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 03:19:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 03:19:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26368.00 2012-Feb-03 03:19:28 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 03:19:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 03:19:28 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:28 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:31 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:19:31.02 2012-Feb-03 03:19:31 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328253571.02 Fri Feb 3 03:19:31 2012 2012-Feb-03 03:19:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.313912 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 03:19:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 03:19:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 03:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.556 (still bad) 2012-Feb-03 03:19:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 03:19:37 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 03:19:37 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 03:19:37 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 03:19:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 03:19:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 03:19:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 03:19:37 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 03:19:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 03:19:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 03:19:37 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 03:19:37 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 03:19:37 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 03:19:37 LOG5 log_alfabeam: Parameters: 11.551083333333333 21.578416666666662 11.735527 2012.0934664233021 52.099983 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333347 21.578416666666676 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 1 11.553591755302739 21.479948935744162 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 2 11.557931160264204 21.546087345274866 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 3 11.555592068076583 21.645411336210291 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 4 11.548680188716469 21.677696456216616 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 5 11.544134701720639 21.608601426462595 2012-Feb-03 03:19:37 LOG4 log_alfabeam: ALFABEAM 6 11.546706984709434 21.510199785343470 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_011 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: patternid=203400051 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: scanid=203400053 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456313912.0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306313912.0 2012-Feb-03 03:19:37 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 03:19:37 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 03:19:37 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_011:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400051:scanid=203400053:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456313912.0:topobfreqhz=1306313912.0:filetype=1 2012-Feb-03 03:19:37 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 03:19:37 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 03:19:37 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 03:19:37 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 03:19:37 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 03:19:37 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 03:19:37 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG4 from_mock: From MOCK: starok 2012-Feb-03 03:19:37 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 03:19:37 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 03:19:37 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400053 2012-Feb-03 03:19:37 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 03:19:37 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-03 03:19:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 03:19:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 03:19:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26378.00 2012-Feb-03 03:19:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 03:19:38 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 03:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.556 (still bad) 2012-Feb-03 03:19:39 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 03:19:39 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 03:19:39 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:19:42 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:19:42.01 2012-Feb-03 03:19:42 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328253582.01 Fri Feb 3 03:19:42 2012 2012-Feb-03 03:19:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.313912 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 03:19:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 03:19:43 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 03:19:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 03:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:19:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 03:19:48 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 03:19:48 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 03:19:48 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 03:19:48 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 03:19:48 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 03:19:48 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 03:19:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:48 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 03:19:48 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 03:19:48 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 143.76 and ZA = 3.94 2012-Feb-03 03:19:48 LOG3 track_source: Calling 'track_source AGES1367_p2_011 143.76 3.9360272431 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:19:48 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 03:19:48 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_011} INFO {Slewing to source 'AGES1367_p2_011' ...} 2012-Feb-03 03:19:48 INFO1 track_source: Starting to track AGES1367_p2_011 2012-Feb-03 03:19:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_011" 2012-Feb-03 03:19:48 LOG3 vw_send: To DATATAKING: set ra 143.76 2012-Feb-03 03:19:48 LOG3 vw_send: To DATATAKING: set dec 3.9360272431 2012-Feb-03 03:19:48 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 03:19:48 LOG3 vw_send: To DATATAKING: pnt tr 143.76 3.9360272431 -CF 2012-Feb-03 03:19:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:19:48 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 03:19:48 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 03:19:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:19:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 03:19:48 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 LOG1 fixed_driftmap: Parameters: HA = +00:10:00.0 Start = 11:44:40.0 LST = 11:44:18.9 diff = 21.1 secs 2012-Feb-03 03:19:48 INFO2 fixed_driftmap: Waiting 19.1 seconds for RA 11:34:40 2012-Feb-03 03:19:48 INFO2 lstwait: Waiting for 19 secs from LST 11:44:19 to LST 11:44:38 ... 2012-Feb-03 03:19:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 19.005156447877418 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 03:19:48 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 03:19:48 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_011" 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: set ra 143.76 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: set dec 3.9360272431 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: vw% 143.76 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: vw% 3.9360272431 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: pnt tr 143.76 3.9360272431 -CF 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:19:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:20:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 03:20:07 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Feb-03 03:20:07 LOG4 lstwait: Finished waiting 0.99 seconds late 2012-Feb-03 03:20:07 INFO3 lstwait: Finished waiting 2012-Feb-03 03:20:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:20:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 03:20:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 03:20:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 03:20:07 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 03:20:07 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 03:20:07 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2012-Feb-03 03:20:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 03:20:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_011 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: patternid=203400054 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: scanid=203400054 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456313912.0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306313912.0 2012-Feb-03 03:20:07 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 03:20:07 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 03:20:07 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_011:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400054:scanid=203400054:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456313912.0:topobfreqhz=1306313912.0:filetype=1 2012-Feb-03 03:20:07 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 03:20:07 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Feb-03 03:20:07 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 03:20:07 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 03:20:07 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Feb-03 03:20:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 03:20:07 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 03:20:07 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 03:20:07 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 03:20:07 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Feb-03 03:20:07 LOG4 from_mock: From MOCK: starok 2012-Feb-03 03:20:07 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 03:20:07 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Feb-03 03:20:07 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 03:20:07 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400054 2012-Feb-03 03:20:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 03:20:08 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2012-Feb-03 03:20:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 03:20:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 03:20:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 03:20:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 03:20:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26409.00 2012-Feb-03 03:20:09 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 03:20:09 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-03 03:20:09 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:09 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.313912 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 03:20:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.313912 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 03:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:20:12 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:20:12.02 2012-Feb-03 03:20:12 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328253612.02 Fri Feb 3 03:20:12 2012 2012-Feb-03 03:20:12 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 03:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:20:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:20:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.036 1.075 0.900 2012-Feb-03 03:20:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.908 0.962 1.048 2012-Feb-03 03:20:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 1.103 1.079 1.017 2012-Feb-03 03:20:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.991 0.014 1.074 0.019 2012-Feb-03 03:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:21:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.035 1.070 0.898 2012-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.908 0.960 1.046 2012-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.095 1.079 1.013 2012-Feb-03 03:21:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.014 1.071 0.019 2012-Feb-03 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-03 03:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 03:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-03 03:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-03 03:22:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:22:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.030 1.067 0.897 2012-Feb-03 03:22:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.905 0.958 1.042 2012-Feb-03 03:22:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.093 1.073 1.011 2012-Feb-03 03:22:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.019 0.014 1.104 0.019 2012-Feb-03 03:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:23:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:23:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.034 1.068 0.895 2012-Feb-03 03:23:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.904 0.957 1.042 2012-Feb-03 03:23:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.095 1.073 1.011 2012-Feb-03 03:23:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.014 1.071 0.019 2012-Feb-03 03:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.030 1.069 0.898 2012-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.908 0.957 1.045 2012-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.095 1.075 1.010 2012-Feb-03 03:24:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.987 0.014 1.071 0.019 2012-Feb-03 03:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 03:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:25:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.991 1.027 1.067 0.896 2012-Feb-03 03:25:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.907 0.955 1.042 2012-Feb-03 03:25:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.094 1.071 1.010 2012-Feb-03 03:25:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.069 0.019 2012-Feb-03 03:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:26:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:26:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.993 1.027 1.069 0.896 2012-Feb-03 03:26:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.908 0.955 1.041 2012-Feb-03 03:26:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.094 1.070 1.009 2012-Feb-03 03:26:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.014 1.068 0.019 2012-Feb-03 03:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2012-Feb-03 03:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2012-Feb-03 03:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2012-Feb-03 03:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2012-Feb-03 03:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-03 03:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:27:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:27:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.030 1.067 0.896 2012-Feb-03 03:27:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.907 0.964 1.049 2012-Feb-03 03:27:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.095 1.072 1.009 2012-Feb-03 03:27:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.993 0.014 1.077 0.019 2012-Feb-03 03:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.105 (still bad) 2012-Feb-03 03:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-03 03:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-03 03:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.124 (still bad) 2012-Feb-03 03:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.132 (still bad) 2012-Feb-03 03:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.126 (still bad) 2012-Feb-03 03:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 03:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.114 (still bad) 2012-Feb-03 03:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-03 03:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:28:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:28:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.034 1.091 0.911 2012-Feb-03 03:28:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.102 0.910 0.961 1.047 2012-Feb-03 03:28:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.101 1.080 1.014 2012-Feb-03 03:28:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.996 0.014 1.080 0.019 2012-Feb-03 03:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2012-Feb-03 03:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.220 (still bad) 2012-Feb-03 03:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.286 (still bad) 2012-Feb-03 03:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.349 (still bad) 2012-Feb-03 03:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.388 (still bad) 2012-Feb-03 03:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.401 (still bad) 2012-Feb-03 03:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.384 (still bad) 2012-Feb-03 03:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.341 (still bad) 2012-Feb-03 03:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.278 (still bad) 2012-Feb-03 03:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.216 (still bad) 2012-Feb-03 03:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.159 (still bad) 2012-Feb-03 03:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.115 (still bad) 2012-Feb-03 03:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-03 03:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.137 (still bad) 2012-Feb-03 03:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.163 (still bad) 2012-Feb-03 03:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.197 (still bad) 2012-Feb-03 03:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.214 (still bad) 2012-Feb-03 03:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.215 (still bad) 2012-Feb-03 03:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.202 (still bad) 2012-Feb-03 03:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.168 (still bad) 2012-Feb-03 03:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.138 (still bad) 2012-Feb-03 03:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.118 (still bad) 2012-Feb-03 03:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2012-Feb-03 03:29:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:29:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.047 1.068 0.896 2012-Feb-03 03:29:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.905 0.957 1.041 2012-Feb-03 03:29:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.096 1.070 1.010 2012-Feb-03 03:29:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.026 0.014 1.112 0.019 2012-Feb-03 03:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-03 03:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Feb-03 03:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.113 (still bad) 2012-Feb-03 03:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-03 03:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:30:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:30:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 1.035 1.069 0.894 2012-Feb-03 03:30:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.905 0.956 1.043 2012-Feb-03 03:30:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.094 1.074 1.012 2012-Feb-03 03:30:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.070 0.019 2012-Feb-03 03:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:31:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:31:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.027 1.065 0.893 2012-Feb-03 03:31:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.905 0.955 1.039 2012-Feb-03 03:31:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.091 1.073 1.010 2012-Feb-03 03:31:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.985 0.014 1.069 0.019 2012-Feb-03 03:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:32:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.024 1.081 0.907 2012-Feb-03 03:32:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 0.905 0.959 1.044 2012-Feb-03 03:32:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.093 1.074 1.010 2012-Feb-03 03:32:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.014 1.074 0.019 2012-Feb-03 03:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:33:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:33:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.030 1.067 0.896 2012-Feb-03 03:33:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.904 0.956 1.042 2012-Feb-03 03:33:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.092 1.073 1.010 2012-Feb-03 03:33:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.014 1.072 0.019 2012-Feb-03 03:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.107 (still bad) 2012-Feb-03 03:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-03 03:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-03 03:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2012-Feb-03 03:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:34:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.994 1.031 1.065 0.893 2012-Feb-03 03:34:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.903 0.957 1.044 2012-Feb-03 03:34:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.093 1.070 1.011 2012-Feb-03 03:34:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.014 1.075 0.019 2012-Feb-03 03:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 03:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.091 (still bad) 2012-Feb-03 03:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:35:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 1.028 1.064 0.892 2012-Feb-03 03:35:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.095 0.905 0.958 1.041 2012-Feb-03 03:35:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.089 1.068 1.010 2012-Feb-03 03:35:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.984 0.014 1.070 0.019 2012-Feb-03 03:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-03 03:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-03 03:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2012-Feb-03 03:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.110 (still bad) 2012-Feb-03 03:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.111 (still bad) 2012-Feb-03 03:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.109 (still bad) 2012-Feb-03 03:36:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:36:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.029 1.068 0.895 2012-Feb-03 03:36:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.918 0.958 1.042 2012-Feb-03 03:36:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.091 1.068 1.010 2012-Feb-03 03:36:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.988 0.014 1.071 0.019 2012-Feb-03 03:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.112 (still bad) 2012-Feb-03 03:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:37:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:37:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.998 1.030 1.075 0.902 2012-Feb-03 03:37:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.908 0.959 1.043 2012-Feb-03 03:37:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.096 1.073 1.013 2012-Feb-03 03:37:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.014 1.075 0.019 2012-Feb-03 03:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:38:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:38:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.995 1.028 1.068 0.897 2012-Feb-03 03:38:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.908 0.959 1.044 2012-Feb-03 03:38:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.101 1.081 1.015 2012-Feb-03 03:38:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.989 0.014 1.073 0.019 2012-Feb-03 03:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-03 03:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.097 (still bad) 2012-Feb-03 03:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-03 03:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.099 (still bad) 2012-Feb-03 03:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.098 (still bad) 2012-Feb-03 03:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:39:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:39:49 LOG4 check_wapp_levels: WAPP-1 power levels: 0.996 1.027 1.069 0.896 2012-Feb-03 03:39:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.906 0.958 1.041 2012-Feb-03 03:39:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.091 1.070 1.011 2012-Feb-03 03:39:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.986 0.014 1.073 0.019 2012-Feb-03 03:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.092 (still bad) 2012-Feb-03 03:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Feb-03 03:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-03 03:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.094 (still bad) 2012-Feb-03 03:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.096 (still bad) 2012-Feb-03 03:40:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 03:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:40:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 03:40:13 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 03:40:13 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 03:40:13 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2012-Feb-03 03:40:13 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 03:40:13 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2012-Feb-03 03:40:13 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 03:40:13 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-03 03:40:13 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 03:40:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 03:40:13 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 03:40:13 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-03 03:40:13 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2012-Feb-03 03:40:13 COMMAND run_command_line: EXECUTING command 51: 'IF LSTSLEW(AGES1367_p2_013) < 120809 THEN' 2012-Feb-03 03:40:14 LOG3 is_if_valid: Current source data: up 114.9 7.7 UP - - 52 1.6 2012-Feb-03 03:40:14 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_013) < 120809 2012-Feb-03 03:40:14 INFO5 is_if_valid: Condition parsed as: 12.106466666666668 < 12.135833333333332 2012-Feb-03 03:40:14 COMMAND run_command_line: EXECUTING command 52: 'FIXEDDRIFT az=112.93 alfaangle=86.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_013 ra=113400.00 dec=213200.00' 2012-Feb-03 03:40:14 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 03:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.095 (still bad) 2012-Feb-03 03:40:14 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 03:40:14 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 112.93 86.0 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_013 113400.00 213200.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:40:14 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 03:40:15 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-03 03:40:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_011' 2012-Feb-03 03:40:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 03:40:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_013} 2012-Feb-03 03:40:15 INFO3 fixed_driftmap: Sending telescope to Az = 112.93 and ZA = 8.46 2012-Feb-03 03:40:15 LOG3 track_source: Calling 'track_source AGES1367_p2_013 112.93 8.4628995555 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:40:15 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 03:40:15 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-03 03:40:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_013} INFO {Slewing to source 'AGES1367_p2_013' ...} 2012-Feb-03 03:40:15 INFO1 track_source: Starting to track AGES1367_p2_013 2012-Feb-03 03:40:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_013" 2012-Feb-03 03:40:15 LOG3 vw_send: To DATATAKING: set ra 112.93 2012-Feb-03 03:40:15 LOG3 vw_send: To DATATAKING: set dec 8.4628995555 2012-Feb-03 03:40:15 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 03:40:15 LOG3 vw_send: To DATATAKING: pnt tr 112.93 8.4628995555 -CF 2012-Feb-03 03:40:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:40:15 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 03:40:15 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-03 03:40:15 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 03:40:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:40:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 03:40:15 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-03 03:40:15 START begin_task: Starting task 'rotate ALFA to +86 degrees' 2012-Feb-03 03:40:15 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-03 03:40:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +86 degrees ...} 2012-Feb-03 03:40:15 INFO2 rotate_alfa: ALFA commanded to +86.0 degrees 2012-Feb-03 03:40:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION 86.0 REPLY 2012-Feb-03 03:40:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 03:40:15 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 03:40:15 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_013" 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: set ra 112.93 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: set dec 8.4628995555 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: vw% 112.93 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: vw% 8.4628995555 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: pnt tr 112.93 8.4628995555 -CF 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:40:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:40:35 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 03:40:35 INFO3 alfa_motor: ALFA rotator in-position +86.00 degrees 2012-Feb-03 03:40:35 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 03:40:35 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-03 03:40:35 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:40:35 STOP finish_task: Finishing task 'rotate ALFA to +86 degrees' 2012-Feb-03 03:40:35 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-03 03:40:35 INFO2 finish_task: DONE finished configuration: rotating ALFA to +86 degrees 2012-Feb-03 03:40:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:40:35 STOP end_task: Finishing task 'rotate ALFA to +86 degrees' with status 'OK' 2012-Feb-03 03:40:35 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-03 03:40:35 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 03:40:35 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-03 03:40:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 03:40:35 LOG3 waittrk: Start waittrk 5 2012-Feb-03 03:40:35 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 03:40:35 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Feb-03 03:40:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 03:40:40 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Feb-03 03:40:40 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 03:40:40 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2012-Feb-03 03:42:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 03:42:14 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2012-Feb-03 03:42:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:42:14 INFO2 waittrk: Now tracking AGES1367_p2_013 2012-Feb-03 03:42:14 LOG4 waittrk: Current telescope position: Az = 112.71 ZA = 8.46 2012-Feb-03 03:42:14 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 03:42:14 LOG5 finish_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-03 03:42:14 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 03:42:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:42:14 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 03:42:14 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-03 03:42:14 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 03:42:14 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2012-Feb-03 03:42:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 03:42:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 03:42:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:42:14 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 03:42:14 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Feb-03 03:42:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 03:42:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:16 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 03:42:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 03:42:16 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Feb-03 03:42:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 03:42:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:42:16 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 03:42:16 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:42:16 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Feb-03 03:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:16 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:42:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:42:16 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Feb-03 03:42:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:42:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 03:42:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:42:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:42:16 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:42:16 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2012-Feb-03 03:42:16 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:42:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:42:16 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2012-Feb-03 03:42:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:42:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:42:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 03:42:16 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2012-Feb-03 03:42:16 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 03:42:16 INFO2 astwait: Waiting for 18 seconds from 07:42:16 to 07:42:34 UTC ... 2012-Feb-03 03:42:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 03:42:16 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 03:42:16 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 03:42:34 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 INFO3 astwait: Finished waiting 2012-Feb-03 03:42:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:42:34 LOG5 dopset_later: Calling 'dopset_later 60.98765080535113' 2012-Feb-03 03:42:34 INFO3 dopset_later: Setting Doppler correction for 03:43:34 (61 seconds from now) 2012-Feb-03 03:42:34 LOG5 antvel: Calling 'antvel 112.930000 8.462900 F Heliocentric 60.98765080535113' 2012-Feb-03 03:42:34 LOG2 antvel: Transforming current Az = 112.93 ZA = 8.46 to apparent RA = 11:34:39.8 Dec = +21:27:41.5 2012-Feb-03 03:42:34 LOG2 antvel: Parameters to Doppler: Heliocentric 27814 2012 34 0.0 2012-Feb-03 03:42:34 INFO5 antvel: Computed antenna velocity: -15.26140 km/s 2012-Feb-03 03:42:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-15.2613990363 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 03:42:34 INFO4 dopset_gen: New sky frequencies: 1381.313746 1381.313746 1381.313746 1381.313746 1381.313746 1381.313746 1381.313746 1381.313746 1381.313746 2012-Feb-03 03:42:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.313746 sky0=1381.313746 sky1=1381.313746 sky2=1381.313746 sky3=1381.313746 sky4=1381.313746 sky5=1381.313746 sky6=1381.313746 sky7=1381.313746 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 03:42:34 LOG2 dopset_gen: Result from 'sky2syn': 1631.313746 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631313746.0} 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 03:42:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 03:42:34 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 03:42:34 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.9 Dec = +21:31:42.3 2012-Feb-03 03:42:34 LOG3 track_source: Calling 'track_source AGES1367_p2_013 113303.9 213142.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:42:34 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 03:42:34 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_013} INFO {Slewing to source 'AGES1367_p2_013' ...} 2012-Feb-03 03:42:34 INFO1 track_source: Starting to track AGES1367_p2_013 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_013" 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: set ra 113303.9 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: set dec 213142.3 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: pnt tr 113303.9 213142.3 -CJ 2012-Feb-03 03:42:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:42:34 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 03:42:34 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 03:42:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:42:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 03:42:34 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 03:42:34 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 03:42:34 LOG3 waittrk: Start waittrk 5 2012-Feb-03 03:42:34 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 03:42:34 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631313746.0} 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_013" 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: set ra 113303.9 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: set dec 213142.3 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.9 213142.3 -CJ 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: 113303.9 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: vw% 213142.3 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:42:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:39 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 03:42:39 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Feb-03 03:42:39 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 03:42:39 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-03 03:42:41 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 03:42:41 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-03 03:42:41 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:42:41 INFO2 waittrk: Now tracking AGES1367_p2_013 2012-Feb-03 03:42:41 LOG4 waittrk: Current telescope position: Az = 112.64 ZA = 8.48 2012-Feb-03 03:42:41 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 03:42:41 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-03 03:42:41 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 03:42:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:42:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 03:42:41 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-03 03:42:41 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 03:42:41 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-03 03:42:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 03:42:41 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 03:42:41 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 03:42:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 03:42:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:42:41 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 03:42:41 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-03 03:42:41 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 03:42:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:44 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 03:42:44 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 03:42:44 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-03 03:42:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 03:42:44 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 03:42:44 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-03 03:42:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 03:42:44 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:42:44 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:42:44 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:42:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 03:42:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 03:42:44 LOG5 begin_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-03 03:42:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 03:42:45 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-03 03:42:45 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-03 03:42:45 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-03 03:42:45 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-03 03:42:45 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 03:42:45 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 03:42:45 LOG5 end_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-03 03:42:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.031 1.042 ALFA beam 1: 1.108 0.907 2012-Feb-03 03:42:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.908 0.927 ALFA beam 3: 0.986 1.044 2012-Feb-03 03:42:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.778 1.096 ALFA beam 5: 1.091 1.026 2012-Feb-03 03:42:45 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.007 0.014 ALFA beam 7: 1.095 0.014 2012-Feb-03 03:42:45 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 03:42:45 LOG5 finish_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-03 03:42:45 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 03:42:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:42:45 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 03:42:45 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-03 03:42:45 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 03:42:45 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-03 03:42:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 03:42:45 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 03:42:45 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 03:42:45 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 03:42:45 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-03 03:42:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 03:42:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.042 1.108 0.907 2012-Feb-03 03:42:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.908 0.927 0.986 1.044 2012-Feb-03 03:42:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.096 1.091 1.026 2012-Feb-03 03:42:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.014 1.095 0.014 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.4 26.7 B 29.8 29.9 mn:A 0.1 0.2 B -0.2 -0.3 gn: 11 11 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.7 29.4 B 27.8 29.4 mn:A 0.1 -0.5 B -0.6 0.2 gn: 12 11 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.0 28.0 B 32.9 28.5 mn:A 0.6 0.6 B 0.1 -0.0 gn: 7 11 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.5 27.2 B 31.1 31.1 mn:A -0.4 -0.3 B 0.5 0.3 gn: 8 10 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.8 28.0 B 30.9 32.4 mn:A 0.0 -0.4 B 0.4 0.1 gn: 10 12 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.5 29.8 B 31.8 29.5 mn:A 0.4 -0.2 B -0.1 0.3 gn: 11 12 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.6 31.4 B 30.2 26.9 mn:A 0.4 -0.2 B 0.0 -0.2 gn: 13 12 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.4 28.7 B 28.8 30.0 mn:A -0.3 0.3 B 0.3 0.1 gn: 12 12 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.3 28.5 B 28.3 28.4 mn:A -0.3 -0.2 B -0.5 -0.1 gn: 13 11 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.4 28.4 B 30.7 29.6 mn:A 0.1 0.0 B -0.3 0.2 gn: 16 13 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.3 30.2 B 29.3 29.3 mn:A 0.7 0.6 B 0.1 0.6 gn: 13 11 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.7 31.5 B 29.7 29.4 mn:A -0.3 0.3 B -0.0 0.3 gn: 13 11 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.0 28.4 B 14.1 14.5 mn:A -0.3 0.2 B 0.4 -0.4 gn: 13 31 2012-Feb-03 03:42:51 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.7 28.8 B 11.1 10.8 mn:A 0.6 0.5 B 0.1 0.2 gn: 14 31 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 03:42:51 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 03:42:51 LOG5 finish_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 03:42:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 03:42:51 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 03:42:51 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 03:42:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 03:42:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 03:42:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 03:42:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 03:42:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 03:42:51 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 03:42:51 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 03:42:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 03:42:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:42:51 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 03:42:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 03:42:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 03:42:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:51 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 03:42:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:42:51 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 03:42:51 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:42:51 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:42:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 03:42:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 03:42:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:42:51 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 03:42:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-03 03:42:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-03 03:42:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-03 03:42:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 03:42:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-03 03:42:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 03:42:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 03:42:51 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Feb-03 03:42:51 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-03 03:42:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 03:42:51 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2012-Feb-03 03:42:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-03 03:42:52 LOG5 log_alfabeam: Parameters: 11.551083333333333 21.528416666666661 12.124088 2012.0935106281845 85.999939 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333334 21.528416666666665 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 1 11.553287317788154 21.437235672695500 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 2 11.558405818904538 21.498068052548689 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 3 11.556256589372971 21.589166688660526 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 4 11.548947412970378 21.620354002003545 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 5 11.543754257863814 21.558543042108958 2012-Feb-03 03:42:52 LOG4 log_alfabeam: ALFABEAM 6 11.545945581227704 21.466521361960503 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_013 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: patternid=203400054 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: scanid=203400055 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456313746.0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306313746.0 2012-Feb-03 03:42:52 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 03:42:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 03:42:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_013:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203400054:scanid=203400055:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456313746.0:topobfreqhz=1306313746.0:filetype=1 2012-Feb-03 03:42:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 03:42:52 LOG5 begin_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Feb-03 03:42:52 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 03:42:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 03:42:52 LOG5 end_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Feb-03 03:42:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 03:42:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 03:42:52 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 03:42:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 03:42:52 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Feb-03 03:42:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20120203.a2048.0006.fits 2012-Feb-03 03:42:52 LOG4 from_mock: From MOCK: starok 2012-Feb-03 03:42:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 03:42:52 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Feb-03 03:42:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 03:42:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400055 2012-Feb-03 03:42:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 03:42:52 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2012-Feb-03 03:42:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120203.a2048.0006.fits} 2012-Feb-03 03:42:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 03:42:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27773.00 2012-Feb-03 03:42:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-03 03:42:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 03:42:52 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 03:42:54 INFO2 got_mock_message: Mock spectrometer start file number is 01800 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 03:42:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 03:42:54 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:54 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:42:57 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:42:57.02 2012-Feb-03 03:42:57 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328254977.02 Fri Feb 3 03:42:57 2012 2012-Feb-03 03:42:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.313746 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 03:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 03:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.558 (still bad) 2012-Feb-03 03:42:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 03:43:02 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 03:43:03 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 03:43:03 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 03:43:03 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 03:43:03 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-03 03:43:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-03 03:43:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-03 03:43:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-03 03:43:03 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-03 03:43:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-03 03:43:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-03 03:43:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-03 03:43:03 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-03 03:43:03 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 03:43:03 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-03 03:43:03 LOG5 log_alfabeam: Parameters: 11.551083333333333 21.528416666666661 12.127152 2012.0935109767536 85.999939 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333334 21.528416666666665 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 1 11.553300095065941 21.437294988518691 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 2 11.558410129593314 21.498271057888349 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 3 11.556247872782039 21.589312344541749 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 4 11.548934175334320 21.620292919783093 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 5 11.543750004004474 21.558340572522436 2012-Feb-03 03:43:03 LOG4 log_alfabeam: ALFABEAM 6 11.545954308803353 21.466381980342085 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_013 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: patternid=203400054 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: scanid=203400056 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456313746.0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306313746.0 2012-Feb-03 03:43:03 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 03:43:03 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 03:43:03 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_013:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203400054:scanid=203400056:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456313746.0:topobfreqhz=1306313746.0:filetype=1 2012-Feb-03 03:43:03 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 03:43:03 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 03:43:03 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 03:43:03 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 03:43:03 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 03:43:03 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-03 03:43:03 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 03:43:03 LOG5 begin_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG4 from_mock: From MOCK: starok 2012-Feb-03 03:43:03 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 03:43:03 LOG5 end_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 03:43:03 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203400056 2012-Feb-03 03:43:03 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 03:43:03 LOG5 begin_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-03 03:43:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 03:43:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-03 03:43:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27784.00 2012-Feb-03 03:43:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 03:43:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 03:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.558 (still bad) 2012-Feb-03 03:43:05 INFO2 got_mock_message: Mock spectrometer start file number is 01900 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 03:43:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-03 03:43:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-03 03:43:08 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:43:08.02 2012-Feb-03 03:43:08 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328254988.02 Fri Feb 3 03:43:08 2012 2012-Feb-03 03:43:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.313746 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 03:43:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 03:43:09 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-03 03:43:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 03:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:43:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 03:43:14 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 03:43:14 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 03:43:14 LOG5 end_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 03:43:14 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 03:43:14 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-03 03:43:14 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-03 03:43:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:43:14 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-03 03:43:14 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-03 03:43:14 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 112.93 and ZA = 8.46 2012-Feb-03 03:43:14 LOG3 track_source: Calling 'track_source AGES1367_p2_013 112.93 8.4628995555 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 03:43:14 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 03:43:14 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_013} INFO {Slewing to source 'AGES1367_p2_013' ...} 2012-Feb-03 03:43:14 INFO1 track_source: Starting to track AGES1367_p2_013 2012-Feb-03 03:43:14 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_013" 2012-Feb-03 03:43:14 LOG3 vw_send: To DATATAKING: set ra 112.93 2012-Feb-03 03:43:14 LOG3 vw_send: To DATATAKING: set dec 8.4628995555 2012-Feb-03 03:43:14 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 03:43:14 LOG3 vw_send: To DATATAKING: pnt tr 112.93 8.4628995555 -CF 2012-Feb-03 03:43:14 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:43:14 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 03:43:14 LOG5 finish_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 03:43:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 03:43:14 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 03:43:14 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 LOG1 fixed_driftmap: Parameters: HA = +00:33:29.8 Start = 12:08:09.8 LST = 12:07:48.8 diff = 21.0 secs 2012-Feb-03 03:43:14 INFO2 fixed_driftmap: Waiting 19 seconds for RA 11:34:40 2012-Feb-03 03:43:14 INFO2 lstwait: Waiting for 19 secs from LST 12:07:49 to LST 12:08:08 ... 2012-Feb-03 03:43:14 LOG4 send_obs_status: To obs_status: <1> TASKTIME 18.995021396389781 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 03:43:14 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-03 03:43:14 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_013" 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: set ra 112.93 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: set dec 8.4628995555 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: vw% 112.93 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: vw% 8.4628995555 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: pnt tr 112.93 8.4628995555 -CF 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 03:43:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 03:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:43:33 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-03 03:43:33 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Feb-03 03:43:33 LOG4 lstwait: Finished waiting 1.01 seconds late 2012-Feb-03 03:43:33 INFO3 lstwait: Finished waiting 2012-Feb-03 03:43:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 03:43:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-03 03:43:33 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-03 03:43:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-03 03:43:33 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-03 03:43:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-03 03:43:33 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2012-Feb-03 03:43:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-03 03:43:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: obsnm=JM 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: object=AGES1367_p2_013 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: patternid=203400057 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: scanid=203400057 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456313746.0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306313746.0 2012-Feb-03 03:43:33 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-03 03:43:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-03 03:43:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=JM:object=AGES1367_p2_013:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203400057:scanid=203400057:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456313746.0:topobfreqhz=1306313746.0:filetype=1 2012-Feb-03 03:43:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-03 03:43:33 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Feb-03 03:43:33 LOG4 from_mock: From MOCK: psetok 2012-Feb-03 03:43:33 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-03 03:43:33 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Feb-03 03:43:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-03 03:43:33 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-03 03:43:33 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-03 03:43:33 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-03 03:43:33 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Feb-03 03:43:33 LOG4 from_mock: From MOCK: starok 2012-Feb-03 03:43:33 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-03 03:43:33 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Feb-03 03:43:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-03 03:43:33 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203400057 2012-Feb-03 03:43:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-03 03:43:34 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2012-Feb-03 03:43:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-03 03:43:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-03 03:43:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-03 03:43:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-03 03:43:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27815.00 2012-Feb-03 03:43:35 INFO2 got_mock_message: Mock spectrometer start file number is 02000 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-03 03:43:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-03 03:43:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.313746 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 912.287450 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1630.292093 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 1834.671446 MHz 2012-Feb-03 03:43:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.313746 MHz Flip = 1 Band = 0 Mixer = 2185.036051 MHz 2012-Feb-03 03:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.108 (still bad) 2012-Feb-03 03:43:38 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:43:38.00 2012-Feb-03 03:43:38 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328255018.00 Fri Feb 3 03:43:38 2012 2012-Feb-03 03:43:38 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-03 03:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:43:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:43:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.046 1.108 0.910 2012-Feb-03 03:43:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.928 0.986 1.046 2012-Feb-03 03:43:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.104 1.100 1.032 2012-Feb-03 03:43:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.024 1.091 0.024 2012-Feb-03 03:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 03:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:44:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:44:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.037 1.048 1.115 0.913 2012-Feb-03 03:44:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.937 0.993 1.051 2012-Feb-03 03:44:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.104 1.102 1.032 2012-Feb-03 03:44:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.024 1.097 0.024 2012-Feb-03 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2012-Feb-03 03:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-03 03:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-03 03:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-03 03:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-03 03:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-03 03:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2012-Feb-03 03:45:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Feb-03 03:45:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.041 1.108 0.910 2012-Feb-03 03:45:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.926 0.988 1.044 2012-Feb-03 03:45:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.096 1.096 1.027 2012-Feb-03 03:45:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.023 1.100 0.023 2012-Feb-03 03:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-03 03:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-03 03:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-03 03:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-03 03:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2012-Feb-03 03:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-03 03:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-03 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-03 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2012-Feb-03 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-03 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 03:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:46:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:46:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.041 1.103 0.904 2012-Feb-03 03:46:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.923 0.986 1.042 2012-Feb-03 03:46:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.096 1.093 1.024 2012-Feb-03 03:46:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.024 1.093 0.024 2012-Feb-03 03:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:47:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:47:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.041 1.103 0.905 2012-Feb-03 03:47:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.909 0.922 0.982 1.042 2012-Feb-03 03:47:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.094 1.090 1.023 2012-Feb-03 03:47:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.024 1.088 0.024 2012-Feb-03 03:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-03 03:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-03 03:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-03 03:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-03 03:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Feb-03 03:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-03 03:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-03 03:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-03 03:48:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 03:48:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.042 1.102 0.905 2012-Feb-03 03:48:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.922 0.983 1.042 2012-Feb-03 03:48:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.096 1.092 1.024 2012-Feb-03 03:48:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.025 1.091 0.025 2012-Feb-03 03:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.102 (still bad) 2012-Feb-03 03:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-03 03:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Feb-03 03:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.101 (still bad) 2012-Feb-03 03:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-03 03:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Feb-03 03:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.102 (still bad) 2012-Feb-03 03:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Feb-03 03:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:49:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:49:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.043 1.105 0.906 2012-Feb-03 03:49:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.939 0.985 1.043 2012-Feb-03 03:49:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.096 1.093 1.026 2012-Feb-03 03:49:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.024 1.089 0.025 2012-Feb-03 03:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.102 (still bad) 2012-Feb-03 03:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-03 03:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2012-Feb-03 03:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2012-Feb-03 03:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2012-Feb-03 03:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2012-Feb-03 03:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2012-Feb-03 03:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-03 03:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-03 03:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 03:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 03:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-03 03:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-03 03:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 03:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 03:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2012-Feb-03 03:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.132 (still bad) 2012-Feb-03 03:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.133 (still bad) 2012-Feb-03 03:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-03 03:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:50:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:50:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.044 1.105 0.905 2012-Feb-03 03:50:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.935 0.989 1.044 2012-Feb-03 03:50:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.095 1.094 1.028 2012-Feb-03 03:50:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.012 0.024 1.099 0.025 2012-Feb-03 03:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-03 03:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-03 03:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:51:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:51:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.043 1.115 0.914 2012-Feb-03 03:51:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.047 1.058 0.989 1.044 2012-Feb-03 03:51:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.093 1.092 1.025 2012-Feb-03 03:51:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.015 0.024 1.103 0.025 2012-Feb-03 03:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 03:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-03 03:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 03:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 03:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-03 03:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.147 (still bad) 2012-Feb-03 03:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.150 (still bad) 2012-Feb-03 03:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.153 (still bad) 2012-Feb-03 03:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.158 (still bad) 2012-Feb-03 03:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.139 (still bad) 2012-Feb-03 03:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-03 03:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 03:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-03 03:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.163 (still bad) 2012-Feb-03 03:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.221 (still bad) 2012-Feb-03 03:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.271 (still bad) 2012-Feb-03 03:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.315 (still bad) 2012-Feb-03 03:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.347 (still bad) 2012-Feb-03 03:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.360 (still bad) 2012-Feb-03 03:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.349 (still bad) 2012-Feb-03 03:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.314 (still bad) 2012-Feb-03 03:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.268 (still bad) 2012-Feb-03 03:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.215 (still bad) 2012-Feb-03 03:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.166 (still bad) 2012-Feb-03 03:53:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:53:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.041 1.110 0.909 2012-Feb-03 03:53:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.925 0.996 1.054 2012-Feb-03 03:53:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.102 1.103 1.030 2012-Feb-03 03:53:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.024 1.132 0.025 2012-Feb-03 03:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-03 03:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 03:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-03 03:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-03 03:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-03 03:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-03 03:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-03 03:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 03:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Feb-03 03:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 03:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Feb-03 03:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-03 03:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-03 03:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:54:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 03:54:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.053 1.106 0.908 2012-Feb-03 03:54:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.910 0.926 0.988 1.045 2012-Feb-03 03:54:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.105 1.106 1.035 2012-Feb-03 03:54:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.025 1.094 0.025 2012-Feb-03 03:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-03 03:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.114 (still bad) 2012-Feb-03 03:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Feb-03 03:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Feb-03 03:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:55:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:55:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.048 1.116 0.914 2012-Feb-03 03:55:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.931 0.996 1.051 2012-Feb-03 03:55:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.102 1.104 1.032 2012-Feb-03 03:55:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.024 1.099 0.024 2012-Feb-03 03:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-03 03:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-03 03:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-03 03:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Feb-03 03:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-03 03:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Feb-03 03:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-03 03:56:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-03 03:56:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.045 1.112 0.910 2012-Feb-03 03:56:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.923 0.990 1.044 2012-Feb-03 03:56:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.095 1.098 1.025 2012-Feb-03 03:56:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.024 1.093 0.025 2012-Feb-03 03:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Feb-03 03:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.110 (still bad) 2012-Feb-03 03:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-03 03:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Feb-03 03:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 03:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 03:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.112 (still bad) 2012-Feb-03 03:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.106 (still bad) 2012-Feb-03 03:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-03 03:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 03:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:57:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 03:57:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.046 1.107 0.909 2012-Feb-03 03:57:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.925 0.988 1.043 2012-Feb-03 03:57:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.096 1.096 1.026 2012-Feb-03 03:57:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.025 1.095 0.025 2012-Feb-03 03:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 03:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 03:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 03:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Feb-03 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-03 03:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-03 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-03 03:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-03 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Feb-03 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2012-Feb-03 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-03 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Feb-03 03:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Feb-03 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-03 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Feb-03 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:58:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 03:58:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.042 1.108 0.907 2012-Feb-03 03:58:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.926 0.990 1.044 2012-Feb-03 03:58:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.093 1.106 1.031 2012-Feb-03 03:58:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.025 1.092 0.025 2012-Feb-03 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-03 03:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 03:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 03:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 03:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-03 03:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 03:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-03 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:59:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 03:59:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.044 1.107 0.909 2012-Feb-03 03:59:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.929 0.990 1.045 2012-Feb-03 03:59:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.097 1.098 1.027 2012-Feb-03 03:59:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.025 1.094 0.025 2012-Feb-03 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Feb-03 03:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 03:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-03 03:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Feb-03 03:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 03:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Feb-03 03:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Feb-03 03:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Feb-03 03:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 03:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 03:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 03:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 04:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 04:00:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.041 1.106 0.909 2012-Feb-03 04:00:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.928 0.992 1.049 2012-Feb-03 04:00:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.102 1.095 1.028 2012-Feb-03 04:00:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.025 1.093 0.025 2012-Feb-03 04:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Feb-03 04:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 04:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 04:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 04:01:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 04:01:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.039 1.110 0.910 2012-Feb-03 04:01:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.911 0.928 0.989 1.044 2012-Feb-03 04:01:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.094 1.097 1.028 2012-Feb-03 04:01:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.025 1.093 0.025 2012-Feb-03 04:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 04:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-03 04:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 04:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-03 04:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Feb-03 04:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 04:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-03 04:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 04:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-03 04:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 04:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 04:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Feb-03 04:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-03 04:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-03 04:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:02:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 04:02:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.040 1.108 0.907 2012-Feb-03 04:02:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.925 0.988 1.045 2012-Feb-03 04:02:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.098 1.099 1.027 2012-Feb-03 04:02:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.013 0.025 1.101 0.025 2012-Feb-03 04:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-03 04:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 04:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-03 04:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Feb-03 04:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:03:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-03 04:03:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.044 1.109 0.910 2012-Feb-03 04:03:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.925 0.989 1.045 2012-Feb-03 04:03:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.098 1.097 1.029 2012-Feb-03 04:03:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.025 1.093 0.025 2012-Feb-03 04:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Feb-03 04:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Feb-03 04:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.108 (still bad) 2012-Feb-03 04:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Feb-03 04:03:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-03 04:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:03:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-03 04:03:39 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-03 04:03:39 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-03 04:03:39 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2012-Feb-03 04:03:39 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-03 04:03:39 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2012-Feb-03 04:03:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-03 04:03:39 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-03 04:03:39 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-03 04:03:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-03 04:03:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-03 04:03:39 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-03 04:03:39 COMMAND run_command_line: EXECUTING command 55: 'ENDIF' 2012-Feb-03 04:03:39 COMMAND run_command_line: EXECUTING command 58: 'IF LSTSLEW(AGES1367_p2_015) < 123139 THEN' 2012-Feb-03 04:03:40 LOG3 is_if_valid: Current source data: up 105.9 13.0 UP - - 29 1.9 2012-Feb-03 04:03:40 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p2_015) < 123139 2012-Feb-03 04:03:40 INFO5 is_if_valid: Condition parsed as: 12.503091666666666 < 12.527500000000002 2012-Feb-03 04:03:40 COMMAND run_command_line: EXECUTING command 59: 'FIXEDDRIFT az=105.22 alfaangle=-82.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_015 ra=113400.00 dec=212900.00' 2012-Feb-03 04:03:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-03 04:03:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-03 04:03:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 105.22 -82.9 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p2_015 113400.00 212900.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 04:03:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-03 04:03:41 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2012-Feb-03 04:03:41 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p2_013' 2012-Feb-03 04:03:41 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-03 04:03:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p2_015} 2012-Feb-03 04:03:41 INFO3 fixed_driftmap: Sending telescope to Az = 105.22 and ZA = 13.74 2012-Feb-03 04:03:41 LOG3 track_source: Calling 'track_source AGES1367_p2_015 105.22 13.7430305701 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 04:03:41 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 04:03:41 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Feb-03 04:03:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_015} INFO {Slewing to source 'AGES1367_p2_015' ...} 2012-Feb-03 04:03:41 INFO1 track_source: Starting to track AGES1367_p2_015 2012-Feb-03 04:03:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_015" 2012-Feb-03 04:03:41 LOG3 vw_send: To DATATAKING: set ra 105.22 2012-Feb-03 04:03:41 LOG3 vw_send: To DATATAKING: set dec 13.7430305701 2012-Feb-03 04:03:41 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 04:03:41 LOG3 vw_send: To DATATAKING: pnt tr 105.22 13.7430305701 -CF 2012-Feb-03 04:03:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 04:03:41 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 04:03:41 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Feb-03 04:03:41 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 04:03:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:03:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 04:03:41 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Feb-03 04:03:41 START begin_task: Starting task 'rotate ALFA to -82.9 degrees' 2012-Feb-03 04:03:41 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2012-Feb-03 04:03:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -82.9 degrees ...} 2012-Feb-03 04:03:41 INFO2 rotate_alfa: ALFA commanded to -82.9 degrees 2012-Feb-03 04:03:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION -82.9 REPLY 2012-Feb-03 04:03:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-03 04:03:41 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-03 04:03:41 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_015" 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: set ra 105.22 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: set dec 13.7430305701 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: vw% 105.22 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: vw% 13.7430305701 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: pnt tr 105.22 13.7430305701 -CF 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 04:03:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Feb-03 04:05:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-03 04:05:14 INFO3 alfa_motor: ALFA rotator in-position -82.90 degrees 2012-Feb-03 04:05:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-03 04:05:14 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2012-Feb-03 04:05:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 04:05:14 STOP finish_task: Finishing task 'rotate ALFA to -82.9 degrees' 2012-Feb-03 04:05:14 LOG5 finish_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2012-Feb-03 04:05:14 INFO2 finish_task: DONE finished configuration: rotating ALFA to -82.9 degrees 2012-Feb-03 04:05:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:05:14 STOP end_task: Finishing task 'rotate ALFA to -82.9 degrees' with status 'OK' 2012-Feb-03 04:05:14 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2012-Feb-03 04:05:15 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 04:05:15 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2012-Feb-03 04:05:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 04:05:15 LOG3 waittrk: Start waittrk 5 2012-Feb-03 04:05:15 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 04:05:15 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2012-Feb-03 04:05:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 04:05:20 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2012-Feb-03 04:05:20 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 04:05:20 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2012-Feb-03 04:05:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 04:05:58 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2012-Feb-03 04:05:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 04:05:58 INFO2 waittrk: Now tracking AGES1367_p2_015 2012-Feb-03 04:05:58 LOG4 waittrk: Current telescope position: Az = 104.96 ZA = 13.75 2012-Feb-03 04:05:58 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 04:05:58 LOG5 finish_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2012-Feb-03 04:05:58 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 04:05:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:05:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 04:05:58 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2012-Feb-03 04:05:58 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 04:05:58 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2012-Feb-03 04:05:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 04:05:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 04:05:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 04:05:58 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 04:05:58 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2012-Feb-03 04:05:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 04:05:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 04:05:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:05:59 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 04:05:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 04:05:59 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2012-Feb-03 04:05:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-03 04:05:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 04:05:59 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-03 04:05:59 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 04:05:59 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2012-Feb-03 04:05:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:05:59 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 04:05:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 04:05:59 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2012-Feb-03 04:05:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 04:05:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-03 04:05:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-03 04:05:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-03 04:05:59 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-03 04:05:59 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2012-Feb-03 04:05:59 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-03 04:05:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-03 04:05:59 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2012-Feb-03 04:05:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-03 04:05:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-03 04:05:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-03 04:05:59 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2012-Feb-03 04:05:59 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-03 04:05:59 INFO2 astwait: Waiting for 2 seconds from 08:05:59 to 08:06:01 UTC ... 2012-Feb-03 04:05:59 LOG4 send_obs_status: To obs_status: <1> TASKTIME 2 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-03 04:05:59 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-03 04:05:59 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-03 04:06:01 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 INFO3 astwait: Finished waiting 2012-Feb-03 04:06:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-03 04:06:01 LOG5 dopset_later: Calling 'dopset_later 61.39754237326467' 2012-Feb-03 04:06:01 INFO3 dopset_later: Setting Doppler correction for 04:07:01 (61.4 seconds from now) 2012-Feb-03 04:06:01 LOG5 antvel: Calling 'antvel 105.220000 13.743031 F Heliocentric 61.39754237326467' 2012-Feb-03 04:06:01 LOG2 antvel: Transforming current Az = 105.22 ZA = 13.74 to apparent RA = 11:34:39.8 Dec = +21:24:41.5 2012-Feb-03 04:06:01 LOG2 antvel: Parameters to Doppler: Heliocentric 29221 2012 34 0.0 2012-Feb-03 04:06:01 INFO5 antvel: Computed antenna velocity: -15.22603 km/s 2012-Feb-03 04:06:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-15.2260315441 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-03 04:06:01 INFO4 dopset_gen: New sky frequencies: 1381.313584 1381.313584 1381.313584 1381.313584 1381.313584 1381.313584 1381.313584 1381.313584 1381.313584 2012-Feb-03 04:06:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.313584 sky0=1381.313584 sky1=1381.313584 sky2=1381.313584 sky3=1381.313584 sky4=1381.313584 sky5=1381.313584 sky6=1381.313584 sky7=1381.313584 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-03 04:06:01 LOG2 dopset_gen: Result from 'sky2syn': 1631.313584 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631313584.0} 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 04:06:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-03 04:06:01 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-03 04:06:01 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.5 Dec = +21:28:42.3 2012-Feb-03 04:06:01 LOG3 track_source: Calling 'track_source AGES1367_p2_015 113303.5 212842.3 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-03 04:06:01 START begin_task: Starting task 'sending tracking commands' 2012-Feb-03 04:06:01 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p2_015} INFO {Slewing to source 'AGES1367_p2_015' ...} 2012-Feb-03 04:06:01 INFO1 track_source: Starting to track AGES1367_p2_015 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p2_015" 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: set ra 113303.5 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: set dec 212842.3 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: pnt tr 113303.5 212842.3 -CJ 2012-Feb-03 04:06:01 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 04:06:01 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-03 04:06:01 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-03 04:06:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:06:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-03 04:06:01 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 START begin_task: Starting task 'waiting on telescope' 2012-Feb-03 04:06:01 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-03 04:06:01 LOG3 waittrk: Start waittrk 5 2012-Feb-03 04:06:01 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-03 04:06:01 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631313584.0} 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p2_015" 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: set ra 113303.5 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: set dec 212842.3 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.5 212842.3 -CJ 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: 113303.5 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: vw% 212842.3 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-03 04:06:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:06:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-03 04:06:06 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2012-Feb-03 04:06:06 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-03 04:06:06 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2012-Feb-03 04:06:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-03 04:06:08 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2012-Feb-03 04:06:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-03 04:06:08 INFO2 waittrk: Now tracking AGES1367_p2_015 2012-Feb-03 04:06:08 LOG4 waittrk: Current telescope position: Az = 104.92 ZA = 13.77 2012-Feb-03 04:06:08 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-03 04:06:08 LOG5 finish_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2012-Feb-03 04:06:08 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-03 04:06:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:06:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-03 04:06:08 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2012-Feb-03 04:06:08 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-03 04:06:08 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2012-Feb-03 04:06:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-03 04:06:08 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-03 04:06:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-03 04:06:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-03 04:06:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 04:06:08 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-03 04:06:08 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Feb-03 04:06:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-03 04:06:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 04:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:06:11 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 04:06:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-03 04:06:11 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Feb-03 04:06:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-03 04:06:11 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-03 04:06:11 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2012-Feb-03 04:06:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 04:06:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 04:06:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 04:06:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 04:06:11 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-03 04:06:11 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-03 04:06:11 LOG5 begin_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2012-Feb-03 04:06:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:06:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-03 04:06:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Feb-03 04:06:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2012-Feb-03 04:06:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-03 04:06:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-03 04:06:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-03 04:06:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-03 04:06:12 LOG5 end_task: Level: (5) ID = <10340> Status = 0 0 0 0 ok 2012-Feb-03 04:06:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.060 1.068 ALFA beam 1: 0.892 0.892 2012-Feb-03 04:06:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.918 0.944 ALFA beam 3: 0.979 1.085 2012-Feb-03 04:06:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.797 0.957 ALFA beam 5: 0.956 1.119 2012-Feb-03 04:06:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.082 0.014 ALFA beam 7: 0.939 0.014 2012-Feb-03 04:06:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-03 04:06:12 LOG5 finish_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2012-Feb-03 04:06:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-03 04:06:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:06:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-03 04:06:12 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2012-Feb-03 04:06:12 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-03 04:06:12 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2012-Feb-03 04:06:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-03 04:06:12 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-03 04:06:12 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-03 04:06:12 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-03 04:06:12 LOG5 begin_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2012-Feb-03 04:06:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-03 04:06:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.068 0.892 0.892 2012-Feb-03 04:06:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.944 0.979 1.085 2012-Feb-03 04:06:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.797 0.957 0.956 1.119 2012-Feb-03 04:06:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.014 0.939 0.014 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.9 27.2 B 30.2 30.3 mn:A -0.1 -0.2 B -0.3 -0.4 gn: 11 11 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.2 29.9 B 28.1 29.7 mn:A -0.0 -0.5 B -0.6 0.1 gn: 12 11 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.4 28.4 B 32.4 28.1 mn:A 0.3 0.6 B 0.1 -0.1 gn: 7 11 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.0 27.7 B 30.8 30.8 mn:A -0.5 -0.3 B 0.6 0.3 gn: 8 10 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.2 31.2 B 31.0 32.4 mn:A -0.0 -0.4 B 0.4 0.1 gn: 11 12 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.5 29.7 B 31.9 29.7 mn:A 0.4 -0.3 B 0.0 0.2 gn: 11 12 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.4 31.1 B 30.7 27.4 mn:A 0.4 -0.3 B 0.0 -0.2 gn: 13 12 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.3 28.6 B 29.2 30.4 mn:A -0.2 0.3 B 0.2 0.1 gn: 12 12 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.7 28.8 B 29.7 29.8 mn:A -0.3 -0.3 B -0.6 0.0 gn: 13 11 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.8 28.8 B 32.0 30.8 mn:A 0.1 -0.0 B -0.3 0.2 gn: 16 13 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 28.5 B 30.9 31.0 mn:A 0.8 0.7 B 0.1 0.6 gn: 12 11 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.7 29.5 B 31.0 30.8 mn:A -0.4 0.2 B -0.1 0.1 gn: 12 11 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.3 29.6 B 14.1 14.5 mn:A -0.4 0.2 B 0.4 -0.3 gn: 13 31 2012-Feb-03 04:06:17 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.0 29.9 B 11.1 10.8 mn:A 0.6 0.4 B 0.1 0.2 gn: 14 31 2012-Feb-03 04:06:17 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-03 04:06:17 LOG5 end_task: Level: (5) ID = <10342> Status = 0 0 0 0 ok 2012-Feb-03 04:06:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-03 04:06:17 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-03 04:06:17 LOG5 finish_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2012-Feb-03 04:06:17 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-03 04:06:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:06:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-03 04:06:17 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2012-Feb-03 04:06:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-03 04:06:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-03 04:06:17 LOG5 finish_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2012-Feb-03 04:06:17 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-03 04:06:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-03 04:06:18 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-03 04:06:18 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2012-Feb-03 04:06:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 JM 2012-Feb-03 04:06:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 JM 2012-Feb-03 04:06:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 JM 2012-Feb-03 04:06:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 JM 2012-Feb-03 04:06:18 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-03 04:06:18 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-03 04:06:18 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2012-Feb-03 04:06:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-03 04:06:18 START begin_task: Starting task 'selecting calibration type' 2012-Feb-03 04:06:18 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2012-Feb-03 04:06:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-03 04:06:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-03 04:06:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 04:06:18 START begin_task: Starting task 'waiting on setcal' 2012-Feb-03 04:06:18 LOG5 begin_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2012-Feb-03 04:06:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 JM' 2012-Feb-03 04:06:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-03 04:06:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-03 04:06:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-03 04:06:18 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-03 04:06:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-03 04:06:18 LOG5 end_task: Level: (5) ID = <10345> Status