2012-Feb-02 01:03:56 BEGIN executive: CIMA executive starting ... 2012-Feb-02 01:03:57 NOTE executive: STARTING NEW CIMA SESSION 2012-Feb-02 01:03:57 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2012-Feb-02 01:03:57 INFO4 executive: This is an ON-LINE session 2012-Feb-02 01:03:57 INFO4 executive: This is a LOCAL session 2012-Feb-02 01:03:57 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Feb-02 01:03:57 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Elliot Gonzalez' 2012-Feb-02 01:03:57 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20120202' 2012-Feb-02 01:03:57 LOG2 log_preferences: Currently applied preferences: 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(dailylog) = daily 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(offlinelog) = write 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(logcolours) = full 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(displaylevel) = INFO1 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(displayformat) = short 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(logformat) = new 2012-Feb-02 01:03:57 LOG2 log_preferences: prefs(fontsize) = 4 2012-Feb-02 01:03:57 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Feb-02 01:03:57 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Feb-02 01:03:57 ALERT executive: CIMA executive ready 2012-Feb-02 01:03:58 NOTE frontend: CIMA frontend ready 2012-Feb-02 01:04:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:04:00 LOG4 got_cormsg: From DATATAKING: setup 2012-Feb-02 01:04:02 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Feb-02 01:04:02 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2012-Feb-02 01:04:02 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Feb-02 01:04:02 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2012-Feb-02 01:04:03 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-02 01:04:03 NOTE select_receiver: Starting to select receiver ALFA 2012-Feb-02 01:04:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Feb-02 01:04:03 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Feb-02 01:04:03 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Feb-02 01:04:03 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Feb-02 01:04:03 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Feb-02 01:04:03 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-02 01:04:03 DONE finish_task: DONE finished selecting: receiver ALFA 2012-Feb-02 01:04:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:04:03 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Feb-02 01:04:03 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2012-Feb-02 01:04:05 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% io 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2012-Feb-02 01:04:05 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:04:05 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:04:12 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:04:58 INFO5 CIMA-read_in_command_file: Included command file 'command_galfasrc_cima31.cmd' (at lines 1 - 24) 2012-Feb-02 01:04:58 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 87 - 103) 2012-Feb-02 01:04:59 INFO4 CIMA-load_command_file: Loaded command file '120202.cmd' 2012-Feb-02 01:05:03 INFO1 CIMA-run_command_file: Transferring command file '120202.cmd' to executive ... 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_cima31.conf} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG togs_ages.cat} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {IF isup(galfasrc) then} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {GOTO galfasrc} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {ELSEIF isup(galfasrc2) then} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 10 {GOTO galfasrc2} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 11 {ELSE} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 12 {TRACKCURPOS} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 13 {LOG "No source found in togs_ages.cat - tracking current position"} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 14 {ENDIF} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 15 {ALFAANGLE 19} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 16 {WAITTRACK} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 20 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 28 {LOAD ages_mock.conf} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 29 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 30 {CATALOG AGESFull.cat} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 33 {IF LSTSLEW(AGESLEO_p1_043) < 093839 THEN} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 34 {FIXEDDRIFT az=286.76 alfaangle=85.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_043 ra=103500.00 dec=134500.00} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 37 {ENDIF} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 40 {IF LSTSLEW(AGESLEO_p1_049) < 100209 THEN} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 41 {FIXEDDRIFT az=299.70 alfaangle=73.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_049 ra=103500.00 dec=133600.00} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 44 {ENDIF} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 47 {IF LSTSLEW(AGES1367_p1_054) < 103138 THEN} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 48 {FIXEDDRIFT az=259.44 alfaangle=-64.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_054 ra=113400.00 dec=203030.00} 2012-Feb-02 01:05:03 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 51 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 54 {IF LSTSLEW(AGES1367_p1_056) < 105508 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 55 {FIXEDDRIFT az=256.08 alfaangle=-58.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_056 ra=113400.00 dec=202730.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 58 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 61 {IF LSTSLEW(AGES1367_p1_058) < 111839 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 62 {FIXEDDRIFT az=241.63 alfaangle=-40.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_058 ra=113400.00 dec=202430.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 65 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 68 {IF LSTSLEW(AGES1367_p1_060) < 114439 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 69 {FIXEDDRIFT az=129.73 alfaangle=65.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_060 ra=113400.00 dec=202130.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 72 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 75 {IF LSTSLEW(AGES1367_p2_001) < 120809 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 76 {FIXEDDRIFT az=114.82 alfaangle=83.9 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_001 ra=113400.00 dec=215000.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 79 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 38 82 {IF LSTSLEW(AGES1367_p2_003) < 123139 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 39 83 {FIXEDDRIFT az=106.46 alfaangle=-84.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p2_003 ra=113400.00 dec=214700.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 40 86 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 41 93 {LOAD togs_cima31.conf} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 42 94 {TRACKCURPOS} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 43 95 {ALFAANGLE 19} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 44 99 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 45 106 {IF LSTSLEW(AGES5523_p1_093) < 131933 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 46 107 {FIXEDDRIFT az=222.59 alfaangle=-23.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_093 ra=140500.00 dec=290200.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 47 110 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 48 113 {IF LSTSLEW(AGES5523_p1_017) < 134232 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 49 114 {FIXEDDRIFT az=201.52 alfaangle=-1.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_017 ra=140500.00 dec=305600.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 50 117 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 51 120 {IF LSTSLEW(AGES5523_p1_019) < 140532 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 52 121 {FIXEDDRIFT az=180.00 alfaangle=19.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_019 ra=140500.00 dec=305300.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 53 124 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 54 127 {IF LSTSLEW(AGES5523_p1_021) < 142832 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 55 128 {FIXEDDRIFT az=158.31 alfaangle=40.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_021 ra=140500.00 dec=305000.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 56 131 {ENDIF} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 57 134 {IF LSTSLEW(AGES5523_p1_095) < 145133 THEN} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 58 135 {FIXEDDRIFT az=137.27 alfaangle=62.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES5523_p1_095 ra=140500.00 dec=285900.00} 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: store_command_file_line 59 138 {ENDIF} 2012-Feb-02 01:05:04 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: run_command_file 120202.cmd 1 1 59 2012-Feb-02 01:05:04 LOG4 run_command_file: Calling 'run_command_file 120202.cmd 1 1 59' 2012-Feb-02 01:05:04 BEGIN begin_task: Starting task 'running command file '120202.cmd'' 2012-Feb-02 01:05:04 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Feb-02 01:05:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '120202.cmd' ...} 2012-Feb-02 01:05:04 NOTE run_command_file: Starting execution of command file '120202.cmd' from line 1 2012-Feb-02 01:05:04 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_cima31.conf' 2012-Feb-02 01:05:04 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Feb-02 01:05:04 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 01:05:04 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Feb-02 01:05:05 NOTE CIMA-load_config_file: Loading configuration file 'togs_cima31.conf' 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1381.2" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Feb-02 01:05:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1631.200000" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Feb-02 01:05:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Feb-02 01:05:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Feb-02 01:05:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 01:05:07 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Feb-02 01:05:07 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Feb-02 01:05:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Feb-02 01:05:07 INFO1 config_iflo: Selecting receiver ALFA 2012-Feb-02 01:05:07 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2012-Feb-02 01:05:07 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2012-Feb-02 01:05:07 START begin_task: Starting task 'selecting receiver ALFA' 2012-Feb-02 01:05:07 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 NOTE select_receiver: Starting to select receiver ALFA 2012-Feb-02 01:05:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Feb-02 01:05:07 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Feb-02 01:05:07 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Feb-02 01:05:07 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 INFO2 finish_task: DONE finished selecting: receiver ALFA 2012-Feb-02 01:05:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:05:07 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Feb-02 01:05:07 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 START begin_task: Starting task 'waiting for receiver ALFA' 2012-Feb-02 01:05:07 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2012-Feb-02 01:05:07 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Feb-02 01:05:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Feb-02 01:05:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:05:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:05:07 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:05:07 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:05:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:05:07 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:05:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: alfafb 1 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Feb-02 01:05:07 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Feb-02 01:05:07 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Feb-02 01:05:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Feb-02 01:05:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:05:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Feb-02 01:05:07 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: alfafb 1 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Feb-02 01:05:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:14 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:20 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:05:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Feb-02 01:05:23 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Feb-02 01:05:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Feb-02 01:05:23 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 DONE finish_task: DONE finished configuration: IF/LO path 2012-Feb-02 01:05:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:05:23 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Feb-02 01:05:23 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Feb-02 01:05:23 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Feb-02 01:05:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Feb-02 01:05:23 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-02 01:05:23 START begin_task: Starting task 'selecting calibration port' 2012-Feb-02 01:05:23 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-02 01:05:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-02 01:05:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:05:23 START begin_task: Starting task 'waiting on calport' 2012-Feb-02 01:05:23 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:05:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-02 01:05:23 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-02 01:05:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-02 01:05:23 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:05:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:05:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:05:23 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:05:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:05:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:05:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:05:23 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Feb-02 01:05:23 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Feb-02 01:05:23 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-02 01:05:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-02 01:05:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:05:24 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Feb-02 01:05:24 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:05:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:05:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:05:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:05:24 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:05:24 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Feb-02 01:05:24 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-02 01:05:24 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Feb-02 01:05:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:05:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Feb-02 01:05:24 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Feb-02 01:05:24 COMMAND run_command_line: EXECUTING command 6: 'CATALOG togs_ages.cat' 2012-Feb-02 01:05:24 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/togs_ages.cat' 2012-Feb-02 01:05:24 COMMAND run_command_line: EXECUTING command 7: 'IF isup(galfasrc) then' 2012-Feb-02 01:05:24 LOG3 is_if_valid: Current source data: up 641.9 14.8 UP - - 140 7.3 2012-Feb-02 01:05:24 INFO5 is_if_valid: Evaluating condition: ISUP(galfasrc) 2012-Feb-02 01:05:24 INFO5 is_if_valid: Condition parsed as: 1 2012-Feb-02 01:05:24 COMMAND run_command_line: EXECUTING command 8: 'GOTO galfasrc' 2012-Feb-02 01:05:24 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2048/togs_ages.cat galfasrc nooffset nowait' 2012-Feb-02 01:05:24 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2012-Feb-02 01:05:24 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-02 01:05:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2012-Feb-02 01:05:24 LOG3 track_source: Calling 'track_source galfasrc 102500.0 +144800 J 0.0 0.0 main small /share/obs4/usr/a2048/togs_ages.cat 0 Topocentric velocity(optical)' 2012-Feb-02 01:05:24 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 01:05:24 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-02 01:05:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2012-Feb-02 01:05:24 INFO1 track_source: Starting to track galfasrc 2012-Feb-02 01:05:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2012-Feb-02 01:05:25 LOG3 vw_send: To DATATAKING: set ra 102500.0 2012-Feb-02 01:05:25 LOG3 vw_send: To DATATAKING: set dec +144800 2012-Feb-02 01:05:25 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 01:05:25 LOG3 vw_send: To DATATAKING: pnt tr 102500.0 +144800 -CJ 2012-Feb-02 01:05:25 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2012-Feb-02 01:05:25 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 01:05:25 LOG5 finish_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-02 01:05:25 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 01:05:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:05:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 01:05:25 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Feb-02 01:05:25 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2012-Feb-02 01:05:25 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-02 01:05:25 DONE finish_task: DONE finished tracking: source 'galfasrc' 2012-Feb-02 01:05:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:05:25 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2012-Feb-02 01:05:25 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 9: 'ELSEIF isup(galfasrc2) then' 2012-Feb-02 01:05:25 INFO1 run_command_line: Skipping line 'ELSEIF isup(galfasrc2) then' since an earlier condition already has been true 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 10: 'GOTO galfasrc2' 2012-Feb-02 01:05:25 INFO1 run_command_line: Skipping line 'GOTO galfasrc2' in non-true conditional branch 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 11: 'ELSE' 2012-Feb-02 01:05:25 INFO1 run_command_line: Skipping 'ELSE' since an earlier condition already has been true 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 12: 'TRACKCURPOS' 2012-Feb-02 01:05:25 INFO1 run_command_line: Skipping line 'TRACKCURPOS' in non-true conditional branch 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 13: 'LOG "No source found in togs_ages.cat - tracking current position"' 2012-Feb-02 01:05:25 INFO1 run_command_line: Skipping line 'LOG "No source found in togs_ages.cat - tracking current position"' in non-true conditional branch 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 14: 'ENDIF' 2012-Feb-02 01:05:25 COMMAND run_command_line: EXECUTING command 15: 'ALFAANGLE 19' 2012-Feb-02 01:05:25 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2012-Feb-02 01:05:25 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2012-Feb-02 01:05:25 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-02 01:05:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2012-Feb-02 01:05:25 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2012-Feb-02 01:05:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2012-Feb-02 01:05:25 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-02 01:05:25 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-02 01:05:25 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Feb-02 01:05:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20120202.a2048.0000.fits 2012-Feb-02 01:05:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2012-Feb-02 01:05:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Feb-02 01:05:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Feb-02 01:05:25 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20120202.a2048.0000.fits} 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: set ra 102500.0 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: set dec +144800 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: vw% 102500.0 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: vw% +144800 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: pnt tr 102500.0 +144800 -CJ 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2012-Feb-02 01:05:25 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-02 01:05:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 01:06:08 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-02 01:06:08 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2012-Feb-02 01:06:08 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-02 01:06:08 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Feb-02 01:06:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:06:08 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2012-Feb-02 01:06:08 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-02 01:06:08 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2012-Feb-02 01:06:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:06:08 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2012-Feb-02 01:06:08 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2012-Feb-02 01:06:08 COMMAND run_command_line: EXECUTING command 16: 'WAITTRACK' 2012-Feb-02 01:06:08 BEGIN begin_task: Starting task 'waiting on telescope' 2012-Feb-02 01:06:08 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-02 01:06:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 01:06:08 LOG3 waittrk: Start waittrk 5 2012-Feb-02 01:06:08 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 01:06:08 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Feb-02 01:06:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 01:06:13 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Feb-02 01:06:13 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 01:06:13 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Feb-02 01:12:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 01:12:42 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Feb-02 01:12:42 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:12:42 INFO2 waittrk: Now tracking galfasrc 2012-Feb-02 01:12:42 LOG4 waittrk: Current telescope position: Az = 643.60 ZA = 13.14 2012-Feb-02 01:12:42 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 01:12:42 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-02 01:12:42 DONE finish_task: DONE finished waiting: telescope on source 2012-Feb-02 01:12:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:12:43 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 01:12:43 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2012-Feb-02 01:12:43 COMMAND run_command_line: EXECUTING command 20: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Feb-02 01:12:43 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2012-Feb-02 01:12:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 01:12:43 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}' 2012-Feb-02 01:12:43 BEGIN begin_task: Starting task 'smart frequency switching' 2012-Feb-02 01:12:43 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-02 01:12:43 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2012-Feb-02 01:12:43 INFO1 smartfreq: Starting pattern: Smart frequency switching 2012-Feb-02 01:12:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2012-Feb-02 01:12:43 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 01:12:43 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-02 01:12:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 01:12:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 01:12:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:12:43 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 01:12:43 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-02 01:12:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 01:12:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:12:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:43 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:12:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 01:12:43 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2012-Feb-02 01:12:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 01:12:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:12:43 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 01:12:43 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:12:43 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:44 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:12:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:12:44 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:12:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 01:12:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:12:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:12:44 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:12:44 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:12:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:12:44 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:12:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:12:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 01:12:44 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:12:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:12:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:12:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:12:44 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20120202.a2048.0000.fits' is empty! 2012-Feb-02 01:12:44 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2012-Feb-02 01:12:44 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-02 01:12:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 01:12:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:12:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:12:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:12:44 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:12:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:12:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:12:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:12:44 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Feb-02 01:12:44 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 01:12:44 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2012-Feb-02 01:12:44 INFO2 adjust_power: Starting to adjust WAPP power 2012-Feb-02 01:12:44 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-02 01:12:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-02 01:12:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:12:44 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-02 01:12:44 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Feb-02 01:12:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-02 01:12:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:12:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 01:12:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:46 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:12:46 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-02 01:12:46 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-02 01:12:46 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 01:12:46 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 01:12:46 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:12:46 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:12:46 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:12:46 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:12:46 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-02 01:12:46 LOG5 begin_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-02 01:12:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:46 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Feb-02 01:12:46 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 2 3 dB 2012-Feb-02 01:12:46 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Feb-02 01:12:46 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-02 01:12:46 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-02 01:12:46 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-02 01:12:46 LOG5 end_task: Level: (5) ID = <10029> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.023 1.056 ALFA beam 1: 0.889 0.963 2012-Feb-02 01:12:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.080 0.945 ALFA beam 3: 0.964 1.065 2012-Feb-02 01:12:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.762 0.913 ALFA beam 5: 1.104 1.045 2012-Feb-02 01:12:46 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.034 0.014 ALFA beam 7: 0.907 0.014 2012-Feb-02 01:12:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 01:12:46 LOG5 finish_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-02 01:12:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:12:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 01:12:46 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 01:12:46 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 01:12:46 LOG5 finish_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2012-Feb-02 01:12:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:12:46 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 01:12:46 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Feb-02 01:12:46 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-02 01:12:46 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-02 01:12:46 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:12:46 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:12:46 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:12:46 LOG2 antvel: Parameters to Doppler: Topocentric 18766 2012 33 0.0 2012-Feb-02 01:12:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:12:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-02 01:12:46 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-02 01:12:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:12:46 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:12:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:12:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:12:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Feb-02 01:12:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:12:46 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Feb-02 01:12:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-02 01:12:46 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.550140 2012.0904874261669 18.999933 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666657 14.800000000000004 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 1 10.409425771752298 14.815469617587359 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 2 10.412554632508913 14.728595873219863 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 3 10.419788748895066 14.712648921046727 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 4 10.423910798609368 14.784746948961937 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 5 10.420754144689949 14.871986719454551 2012-Feb-02 01:12:46 LOG4 log_alfabeam: ALFABEAM 6 10.413503435180067 14.886761740160109 2012-Feb-02 01:12:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300037 2012-Feb-02 01:12:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:12:47 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Feb-02 01:12:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:12:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:12:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:12:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-02 01:12:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18768.00 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:12:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:12:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-02 01:12:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.056 0.889 0.963 2012-Feb-02 01:12:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.986 1.010 1.092 2012-Feb-02 01:12:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.762 0.913 1.104 1.045 2012-Feb-02 01:12:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.034 0.014 0.907 0.014 2012-Feb-02 01:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2012-Feb-02 01:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.158 (still bad) 2012-Feb-02 01:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.157 (still bad) 2012-Feb-02 01:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.155 (still bad) 2012-Feb-02 01:12:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:12:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:12:58 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Feb-02 01:12:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:12:58 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2012-Feb-02 01:12:58 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Feb-02 01:12:58 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-02 01:12:58 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-02 01:12:58 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:12:58 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:12:58 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:12:58 LOG2 antvel: Parameters to Doppler: Topocentric 18778 2012 33 0.0 2012-Feb-02 01:12:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:12:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-02 01:12:58 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-02 01:12:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:12:58 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:12:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:12:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:12:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Feb-02 01:12:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:12:58 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Feb-02 01:12:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-02 01:12:58 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.553483 2012.0904878064239 18.999933 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 1 10.409426731972612 14.815563719022391 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 2 10.412550196200110 14.728650165104147 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 3 10.419783308580092 14.712607534862098 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 4 10.423909864362926 14.784653783679095 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 5 10.420758519126013 14.871934936792099 2012-Feb-02 01:12:58 LOG4 log_alfabeam: ALFABEAM 6 10.413508701573159 14.886801539708802 2012-Feb-02 01:12:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300038 2012-Feb-02 01:12:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:12:59 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-02 01:12:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:12:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:12:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:12:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-02 01:12:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18780.00 2012-Feb-02 01:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.163 (still bad) 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:13:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.201 (still bad) 2012-Feb-02 01:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.202 (still bad) 2012-Feb-02 01:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.200 (still bad) 2012-Feb-02 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.204 (still bad) 2012-Feb-02 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.211 (still bad) 2012-Feb-02 01:13:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:13:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:13:10 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2012-Feb-02 01:13:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:13:10 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Feb-02 01:13:10 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Feb-02 01:13:10 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-02 01:13:10 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-02 01:13:10 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:13:10 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:13:10 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:13:10 LOG2 antvel: Parameters to Doppler: Topocentric 18790 2012 33 0.0 2012-Feb-02 01:13:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:13:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-02 01:13:10 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-02 01:13:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:13:10 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:13:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:13:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Feb-02 01:13:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:13:10 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-02 01:13:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-02 01:13:10 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.556825 2012.0904881866809 18.999933 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666663 14.800000000000002 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 1 10.409427705522441 14.815658537829108 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 2 10.412545728954335 14.728704935725460 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 3 10.419777823481406 14.712565900881611 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 4 10.423908917088285 14.784559906385338 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 5 10.420762924443185 14.871882693929546 2012-Feb-02 01:13:10 LOG4 log_alfabeam: ALFABEAM 6 10.413514011372522 14.886841581811005 2012-Feb-02 01:13:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300039 2012-Feb-02 01:13:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:13:11 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Feb-02 01:13:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:13:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:13:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-02 01:13:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18792.00 2012-Feb-02 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.211 (still bad) 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:13:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.195 (still bad) 2012-Feb-02 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.199 (still bad) 2012-Feb-02 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.197 (still bad) 2012-Feb-02 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.195 (still bad) 2012-Feb-02 01:13:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:13:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:13:22 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Feb-02 01:13:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:13:22 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Feb-02 01:13:22 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Feb-02 01:13:22 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-02 01:13:22 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-02 01:13:22 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:13:22 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:13:22 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:13:22 LOG2 antvel: Parameters to Doppler: Topocentric 18802 2012 33 0.0 2012-Feb-02 01:13:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:13:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-02 01:13:22 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-02 01:13:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:13:22 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:13:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:13:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Feb-02 01:13:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:13:22 LOG5 begin_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2012-Feb-02 01:13:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-02 01:13:22 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.560168 2012.0904885669379 18.999933 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 1 10.409428693206587 14.815754138212474 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 2 10.412541227815925 14.728760223751058 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 3 10.419772289804342 14.712523992539476 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 4 10.423907956000896 14.784465253484393 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 5 10.420767363563350 14.871829953921495 2012-Feb-02 01:13:22 LOG4 log_alfabeam: ALFABEAM 6 10.413519368251492 14.886881892083744 2012-Feb-02 01:13:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300040 2012-Feb-02 01:13:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:13:23 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-02 01:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.205 (still bad) 2012-Feb-02 01:13:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:13:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:13:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-02 01:13:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18804.00 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.179 (still bad) 2012-Feb-02 01:13:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.175 (still bad) 2012-Feb-02 01:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.178 (still bad) 2012-Feb-02 01:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.176 (still bad) 2012-Feb-02 01:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.178 (still bad) 2012-Feb-02 01:13:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:13:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:13:34 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2012-Feb-02 01:13:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:13:34 LOG5 end_task: Level: (3) ID = <10036> Status = 0 0 0 0 ok 2012-Feb-02 01:13:34 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Feb-02 01:13:34 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-02 01:13:34 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-02 01:13:34 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:13:34 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:13:34 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:13:34 LOG2 antvel: Parameters to Doppler: Topocentric 18814 2012 33 0.0 2012-Feb-02 01:13:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:13:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-02 01:13:34 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-02 01:13:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:13:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:13:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:13:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Feb-02 01:13:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:13:34 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2012-Feb-02 01:13:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-02 01:13:34 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.563510 2012.0904889471949 18.999933 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 1 10.409429694660455 14.815850470531368 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 2 10.412536695192628 14.728816002081453 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 3 10.419766710340300 14.712481833252427 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 4 10.423906981454088 14.784369874096178 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 5 10.420771834119222 14.871776742554966 2012-Feb-02 01:13:34 LOG4 log_alfabeam: ALFABEAM 6 10.413524769507790 14.886922448071376 2012-Feb-02 01:13:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300041 2012-Feb-02 01:13:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:13:35 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-02 01:13:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:13:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:13:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.185 (still bad) 2012-Feb-02 01:13:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-02 01:13:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18816.00 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:13:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-02 01:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2012-Feb-02 01:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Feb-02 01:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.133 (still bad) 2012-Feb-02 01:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.132 (still bad) 2012-Feb-02 01:13:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:13:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:13:46 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Feb-02 01:13:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:13:46 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2012-Feb-02 01:13:46 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Feb-02 01:13:46 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-02 01:13:46 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-02 01:13:46 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:13:46 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:13:46 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:13:46 LOG2 antvel: Parameters to Doppler: Topocentric 18826 2012 33 0.0 2012-Feb-02 01:13:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:13:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-02 01:13:46 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-02 01:13:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:13:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:13:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:13:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Feb-02 01:13:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:13:46 LOG5 begin_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2012-Feb-02 01:13:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-02 01:13:46 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.566853 2012.0904893274521 18.999933 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 1 10.409430710713984 14.815947600087897 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 2 10.412532128083692 14.728872310167830 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 3 10.419761081223472 14.712439396128435 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 4 10.423905992638696 14.784273703534831 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 5 10.420776339077884 14.871723022129713 2012-Feb-02 01:13:46 LOG4 log_alfabeam: ALFABEAM 6 10.413530218883638 14.886963275712500 2012-Feb-02 01:13:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300042 2012-Feb-02 01:13:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:13:47 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-02 01:13:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:13:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:13:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-02 01:13:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18828.00 2012-Feb-02 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:13:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:13:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Feb-02 01:13:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.077 0.887 0.977 2012-Feb-02 01:13:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.961 0.979 1.081 2012-Feb-02 01:13:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.932 1.128 1.063 2012-Feb-02 01:13:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.026 0.914 0.026 2012-Feb-02 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2012-Feb-02 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2012-Feb-02 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Feb-02 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Feb-02 01:13:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:13:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:13:58 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Feb-02 01:13:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:13:58 LOG5 end_task: Level: (3) ID = <10040> Status = 0 0 0 0 ok 2012-Feb-02 01:13:58 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Feb-02 01:13:58 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-02 01:13:58 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-02 01:13:58 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:13:58 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:13:58 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:13:58 LOG2 antvel: Parameters to Doppler: Topocentric 18838 2012 33 0.0 2012-Feb-02 01:13:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:13:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-02 01:13:58 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-02 01:13:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:13:58 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:13:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:13:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Feb-02 01:13:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:13:58 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Feb-02 01:13:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-02 01:13:58 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.570195 2012.0904897077091 18.999933 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.799999999999997 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 1 10.409431740994210 14.816045476520287 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 2 10.412527528930333 14.728929120484549 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 3 10.419755405287482 14.712396704889146 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 4 10.423904989916203 14.784176791634712 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 5 10.420780876038897 14.871668818840829 2012-Feb-02 01:13:58 LOG4 log_alfabeam: ALFABEAM 6 10.413535713635843 14.887004352255575 2012-Feb-02 01:13:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300043 2012-Feb-02 01:13:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:13:59 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-02 01:13:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:13:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:13:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:13:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:13:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-02 01:13:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18840.00 2012-Feb-02 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:14:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Feb-02 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Feb-02 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Feb-02 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Feb-02 01:14:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Feb-02 01:14:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:14:10 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2012-Feb-02 01:14:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:14:10 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2012-Feb-02 01:14:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Feb-02 01:14:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 01:14:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 01:14:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:14:10 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2012-Feb-02 01:14:10 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:14:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 01:14:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:14:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:14:10 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2012-Feb-02 01:14:10 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Feb-02 01:14:10 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-02 01:14:10 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-02 01:14:10 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:14:10 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:14:10 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:14:10 LOG2 antvel: Parameters to Doppler: Topocentric 18850 2012 33 0.0 2012-Feb-02 01:14:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:14:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-02 01:14:10 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-02 01:14:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:14:10 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:14:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:14:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Feb-02 01:14:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:14:10 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Feb-02 01:14:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Feb-02 01:14:10 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.573538 2012.0904900879661 18.999933 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999994 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 1 10.409432786357149 14.816144166251966 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 2 10.412522894685916 14.728986473287980 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 3 10.419749678593629 14.712353732313227 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 4 10.423903972451928 14.784079072596338 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 5 10.420785448015369 14.871614094212706 2012-Feb-02 01:14:10 LOG4 log_alfabeam: ALFABEAM 6 10.413541257577277 14.887045703964038 2012-Feb-02 01:14:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300044 2012-Feb-02 01:14:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:14:11 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2012-Feb-02 01:14:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:14:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:14:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-02 01:14:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18852.00 2012-Feb-02 01:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.602 (still bad) 2012-Feb-02 01:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.604 (still bad) 2012-Feb-02 01:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.607 (still bad) 2012-Feb-02 01:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.601 (still bad) 2012-Feb-02 01:14:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:14:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:14:22 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2012-Feb-02 01:14:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:14:22 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2012-Feb-02 01:14:22 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Feb-02 01:14:22 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-02 01:14:22 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-02 01:14:22 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:14:22 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:14:22 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:14:22 LOG2 antvel: Parameters to Doppler: Topocentric 18862 2012 33 0.0 2012-Feb-02 01:14:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:14:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-02 01:14:22 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-02 01:14:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:14:22 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:14:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:14:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Feb-02 01:14:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:14:22 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2012-Feb-02 01:14:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Feb-02 01:14:22 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.576880 2012.0904904682232 18.999933 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 1 10.409433846421297 14.816243618187826 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 2 10.412518227825680 14.729044340618366 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 3 10.419743904018491 14.712310502432219 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 4 10.423902940615653 14.783980596981198 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 5 10.420790052573150 14.871558874856186 2012-Feb-02 01:14:22 LOG4 log_alfabeam: ALFABEAM 6 10.413546847923067 14.887087307785681 2012-Feb-02 01:14:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300045 2012-Feb-02 01:14:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:14:23 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Feb-02 01:14:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:14:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.600 (still bad) 2012-Feb-02 01:14:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-02 01:14:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18864.00 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:14:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.612 (still bad) 2012-Feb-02 01:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.661 (still bad) 2012-Feb-02 01:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.666 (still bad) 2012-Feb-02 01:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.662 (still bad) 2012-Feb-02 01:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.664 (still bad) 2012-Feb-02 01:14:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:14:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:14:34 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Feb-02 01:14:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:14:34 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2012-Feb-02 01:14:34 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Feb-02 01:14:34 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-02 01:14:34 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-02 01:14:34 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:14:34 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:14:34 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:14:34 LOG2 antvel: Parameters to Doppler: Topocentric 18874 2012 33 0.0 2012-Feb-02 01:14:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:14:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-02 01:14:34 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-02 01:14:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:14:34 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:14:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:14:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Feb-02 01:14:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:14:34 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Feb-02 01:14:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Feb-02 01:14:34 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.580223 2012.0904908484802 18.999933 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.800000000000004 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 1 10.409434922069687 14.816343899897220 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 2 10.412513525256287 14.729102763559107 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 3 10.419738077548679 14.712266987692416 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 4 10.423901893546278 14.783881297851545 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 5 10.420794692772233 14.871503121499003 2012-Feb-02 01:14:34 LOG4 log_alfabeam: ALFABEAM 6 10.413552488558471 14.887129190311912 2012-Feb-02 01:14:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300046 2012-Feb-02 01:14:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:14:35 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Feb-02 01:14:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:14:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:14:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.673 (still bad) 2012-Feb-02 01:14:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-02 01:14:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18876.00 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:14:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.673 (still bad) 2012-Feb-02 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.655 (still bad) 2012-Feb-02 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.657 (still bad) 2012-Feb-02 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.656 (still bad) 2012-Feb-02 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.656 (still bad) 2012-Feb-02 01:14:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:14:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:14:46 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2012-Feb-02 01:14:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:14:46 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2012-Feb-02 01:14:46 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Feb-02 01:14:46 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-02 01:14:46 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-02 01:14:46 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:14:46 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:14:46 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:14:46 LOG2 antvel: Parameters to Doppler: Topocentric 18886 2012 33 0.0 2012-Feb-02 01:14:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:14:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-02 01:14:46 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-02 01:14:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:14:46 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:14:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:14:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Feb-02 01:14:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:14:46 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2012-Feb-02 01:14:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Feb-02 01:14:46 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.583565 2012.0904912287374 18.999933 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999997 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 1 10.409436012912064 14.816444959538732 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 2 10.412508789487571 14.729161713708240 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 3 10.419732202104509 14.712223212440287 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 4 10.423900831622072 14.783781226508751 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 5 10.420799366144136 14.871446861175492 2012-Feb-02 01:14:46 LOG4 log_alfabeam: ALFABEAM 6 10.413558176656203 14.887171328184918 2012-Feb-02 01:14:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300047 2012-Feb-02 01:14:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:14:47 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2012-Feb-02 01:14:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:14:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:14:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-02 01:14:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18888.00 2012-Feb-02 01:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.661 (still bad) 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:14:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.625 (still bad) 2012-Feb-02 01:14:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 01:14:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.493 1.497 1.211 1.324 2012-Feb-02 01:14:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.543 1.345 1.410 1.510 2012-Feb-02 01:14:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.998 1.334 1.626 1.471 2012-Feb-02 01:14:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.515 0.025 1.319 0.025 2012-Feb-02 01:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.625 (still bad) 2012-Feb-02 01:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.627 (still bad) 2012-Feb-02 01:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.636 (still bad) 2012-Feb-02 01:14:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:14:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:14:58 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2012-Feb-02 01:14:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:14:58 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2012-Feb-02 01:14:58 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Feb-02 01:14:58 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-02 01:14:58 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-02 01:14:58 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:14:58 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:14:58 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:14:58 LOG2 antvel: Parameters to Doppler: Topocentric 18898 2012 33 0.0 2012-Feb-02 01:14:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:14:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-02 01:14:58 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-02 01:14:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:14:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:14:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:14:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Feb-02 01:14:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:14:58 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2012-Feb-02 01:14:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Feb-02 01:14:58 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.586908 2012.0904916089944 18.999933 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 1 10.409437119859502 14.816546865853143 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 2 10.412504017378641 14.729221232998945 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 3 10.419726273596007 14.712179148786905 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 4 10.423899753954508 14.783680314851672 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 5 10.420804075796642 14.871390053794840 2012-Feb-02 01:14:58 LOG4 log_alfabeam: ALFABEAM 6 10.413563916175725 14.887213748327280 2012-Feb-02 01:14:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300048 2012-Feb-02 01:14:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:14:59 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Feb-02 01:14:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:14:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:14:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:14:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:14:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-02 01:14:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18900.00 2012-Feb-02 01:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.636 (still bad) 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:15:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.567 (still bad) 2012-Feb-02 01:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.569 (still bad) 2012-Feb-02 01:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.565 (still bad) 2012-Feb-02 01:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.565 (still bad) 2012-Feb-02 01:15:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:15:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:15:10 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Feb-02 01:15:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:15:10 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2012-Feb-02 01:15:10 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Feb-02 01:15:10 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-02 01:15:10 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-02 01:15:10 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:15:10 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:15:10 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:15:10 LOG2 antvel: Parameters to Doppler: Topocentric 18910 2012 33 0.0 2012-Feb-02 01:15:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:15:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-02 01:15:10 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-02 01:15:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:15:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:15:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:15:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Feb-02 01:15:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:15:10 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2012-Feb-02 01:15:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Feb-02 01:15:10 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.590250 2012.0904919892514 18.999933 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 1 10.409438242512815 14.816649566239411 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 2 10.412499211474548 14.729281292578712 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 3 10.419720294988041 14.712134821398841 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 4 10.423898660930536 14.783578614934727 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 5 10.420808819226350 14.871332726822793 2012-Feb-02 01:15:10 LOG4 log_alfabeam: ALFABEAM 6 10.413569704246560 14.887256427070543 2012-Feb-02 01:15:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300049 2012-Feb-02 01:15:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:15:11 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2012-Feb-02 01:15:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:15:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.579 (still bad) 2012-Feb-02 01:15:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-02 01:15:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18912.00 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:15:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.549 (still bad) 2012-Feb-02 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.552 (still bad) 2012-Feb-02 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.555 (still bad) 2012-Feb-02 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.552 (still bad) 2012-Feb-02 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.554 (still bad) 2012-Feb-02 01:15:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:15:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:15:22 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2012-Feb-02 01:15:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:15:22 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2012-Feb-02 01:15:22 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Feb-02 01:15:22 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-02 01:15:22 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-02 01:15:22 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:15:22 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:15:22 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:15:22 LOG2 antvel: Parameters to Doppler: Topocentric 18922 2012 33 0.0 2012-Feb-02 01:15:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:15:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-02 01:15:22 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-02 01:15:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:15:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:15:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:15:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Feb-02 01:15:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:15:22 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Feb-02 01:15:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Feb-02 01:15:22 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.593592 2012.0904923695084 18.999933 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999986 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 1 10.409439381468857 14.816753099530866 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 2 10.412494370039976 14.729341917028512 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 3 10.419714263924654 14.712090215438039 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 4 10.423897551967439 14.783476088270062 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 5 10.420813598154384 14.871274856725195 2012-Feb-02 01:15:22 LOG4 log_alfabeam: ALFABEAM 6 10.413575543149459 14.887299378778277 2012-Feb-02 01:15:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300050 2012-Feb-02 01:15:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:15:23 LOG5 begin_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-02 01:15:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:15:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:15:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.561 (still bad) 2012-Feb-02 01:15:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-02 01:15:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18924.00 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:15:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.539 (still bad) 2012-Feb-02 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.538 (still bad) 2012-Feb-02 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.539 (still bad) 2012-Feb-02 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.536 (still bad) 2012-Feb-02 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.534 (still bad) 2012-Feb-02 01:15:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:15:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:15:34 LOG5 end_task: Level: (4) ID = <10058> Status = 0 0 0 0 ok 2012-Feb-02 01:15:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:15:34 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2012-Feb-02 01:15:34 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2012-Feb-02 01:15:34 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2012-Feb-02 01:15:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 01:15:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:15:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:15:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:15:34 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Feb-02 01:15:34 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:15:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:15:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:15:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:15:34 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Feb-02 01:15:34 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2012-Feb-02 01:15:34 INFO3 smartfreq: Taking CAL-OFF at 1375.80607910 MHz ... 2012-Feb-02 01:15:34 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-02 01:15:34 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-02 01:15:34 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:15:34 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:15:34 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:15:34 LOG2 antvel: Parameters to Doppler: Topocentric 18934 2012 33 0.0 2012-Feb-02 01:15:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:15:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-02 01:15:34 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-02 01:15:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:15:34 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:15:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:15:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1375.80607910 MHz}' 2012-Feb-02 01:15:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:15:34 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Feb-02 01:15:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-02 01:15:34 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.596935 2012.0904927497656 18.999933 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666670 14.799999999999997 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 1 10.409440537349147 14.816857505668068 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 2 10.412489491293776 14.729403131713084 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 3 10.419708177978478 14.712045315729643 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 4 10.423896426458331 14.783372695270302 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 5 10.420818414347758 14.871216419213441 2012-Feb-02 01:15:34 LOG4 log_alfabeam: ALFABEAM 6 10.413581435234352 14.887342618145679 2012-Feb-02 01:15:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300051 2012-Feb-02 01:15:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:15:35 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Feb-02 01:15:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:15:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:15:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1375.80607910 MHz ...} 2012-Feb-02 01:15:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18936.00 2012-Feb-02 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.546 (still bad) 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:15:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.150 (still bad) 2012-Feb-02 01:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.152 (still bad) 2012-Feb-02 01:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.150 (still bad) 2012-Feb-02 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.151 (still bad) 2012-Feb-02 01:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2012-Feb-02 01:15:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:15:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:15:46 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Feb-02 01:15:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:15:46 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Feb-02 01:15:46 INFO3 smartfreq: Taking CAL-OFF at 1378.54045410 MHz ... 2012-Feb-02 01:15:46 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-02 01:15:46 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-02 01:15:46 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:15:46 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:15:46 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:15:46 LOG2 antvel: Parameters to Doppler: Topocentric 18946 2012 33 0.0 2012-Feb-02 01:15:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:15:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-02 01:15:46 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-02 01:15:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:15:46 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:15:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:15:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.54045410 MHz}' 2012-Feb-02 01:15:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:15:46 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2012-Feb-02 01:15:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-02 01:15:46 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.600277 2012.0904931300227 18.999933 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000004 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 1 10.409441709740770 14.816962730885050 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 2 10.412484577835002 14.729464907088230 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 3 10.419702040182747 14.712000147430409 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 4 10.423895284803537 14.783268489144863 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 5 10.420823265249588 14.871157442415605 2012-Feb-02 01:15:46 LOG4 log_alfabeam: ALFABEAM 6 10.413587377564484 14.887386121028658 2012-Feb-02 01:15:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300052 2012-Feb-02 01:15:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:15:47 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Feb-02 01:15:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:15:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:15:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.54045410 MHz ...} 2012-Feb-02 01:15:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18948.00 2012-Feb-02 01:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.157 (still bad) 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:15:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.196 (still bad) 2012-Feb-02 01:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.196 (still bad) 2012-Feb-02 01:15:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 01:15:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.122 0.905 1.007 2012-Feb-02 01:15:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.123 0.982 1.040 1.118 2012-Feb-02 01:15:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.815 0.959 1.194 1.104 2012-Feb-02 01:15:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.090 0.025 0.946 0.026 2012-Feb-02 01:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.193 (still bad) 2012-Feb-02 01:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.193 (still bad) 2012-Feb-02 01:15:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:15:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:15:58 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Feb-02 01:15:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:15:58 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2012-Feb-02 01:15:58 INFO3 smartfreq: Taking CAL-OFF at 1378.73576660 MHz ... 2012-Feb-02 01:15:58 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-02 01:15:58 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-02 01:15:58 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:15:58 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:15:58 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:15:58 LOG2 antvel: Parameters to Doppler: Topocentric 18958 2012 33 0.0 2012-Feb-02 01:15:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:15:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-02 01:15:58 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-02 01:15:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:15:58 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:15:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:15:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1378.73576660 MHz}' 2012-Feb-02 01:15:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:15:58 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-02 01:15:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-02 01:15:58 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.603620 2012.0904935102797 18.999933 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.800000000000004 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 1 10.409442899629456 14.817068846966762 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 2 10.412479626400012 14.729527287315907 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 3 10.419695846247414 14.711954681801105 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 4 10.423894126041430 14.783163398768567 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 5 10.420828154090952 14.871097884093299 2012-Feb-02 01:15:58 LOG4 log_alfabeam: ALFABEAM 6 10.413593374293168 14.887429915190674 2012-Feb-02 01:15:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300053 2012-Feb-02 01:15:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:15:59 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-02 01:15:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:15:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:15:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:15:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:15:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1378.73576660 MHz ...} 2012-Feb-02 01:15:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18960.00 2012-Feb-02 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.204 (still bad) 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:16:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.187 (still bad) 2012-Feb-02 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.188 (still bad) 2012-Feb-02 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.187 (still bad) 2012-Feb-02 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.191 (still bad) 2012-Feb-02 01:16:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:16:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:16:10 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2012-Feb-02 01:16:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:16:10 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2012-Feb-02 01:16:10 INFO3 smartfreq: Taking CAL-OFF at 1379.32170410 MHz ... 2012-Feb-02 01:16:10 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-02 01:16:10 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-02 01:16:10 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:16:10 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:16:10 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:16:10 LOG2 antvel: Parameters to Doppler: Topocentric 18970 2012 33 0.0 2012-Feb-02 01:16:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:16:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-02 01:16:10 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-02 01:16:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:16:10 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:16:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:16:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1379.32170410 MHz}' 2012-Feb-02 01:16:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:16:10 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-02 01:16:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-02 01:16:10 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.606962 2012.0904938905367 18.999933 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999997 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 1 10.409444106592884 14.817175799353004 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 2 10.412474639624625 14.729590242379897 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 3 10.419689599252346 14.711908944332169 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 4 10.423892950581511 14.783057478138208 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 5 10.420833078278520 14.871037772826513 2012-Feb-02 01:16:10 LOG4 log_alfabeam: ALFABEAM 6 10.413599422438448 14.887473976163824 2012-Feb-02 01:16:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300054 2012-Feb-02 01:16:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:16:11 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Feb-02 01:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.190 (still bad) 2012-Feb-02 01:16:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:16:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:16:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1379.32170410 MHz ...} 2012-Feb-02 01:16:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18972.00 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.195 (still bad) 2012-Feb-02 01:16:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.168 (still bad) 2012-Feb-02 01:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.166 (still bad) 2012-Feb-02 01:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.169 (still bad) 2012-Feb-02 01:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2012-Feb-02 01:16:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:16:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:16:22 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Feb-02 01:16:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:16:22 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Feb-02 01:16:22 INFO3 smartfreq: Taking CAL-OFF at 1380.49357910 MHz ... 2012-Feb-02 01:16:22 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-02 01:16:22 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-02 01:16:22 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:16:22 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:16:22 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:16:22 LOG2 antvel: Parameters to Doppler: Topocentric 18982 2012 33 0.0 2012-Feb-02 01:16:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:16:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-02 01:16:22 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-02 01:16:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:16:22 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.49357910 MHz}' 2012-Feb-02 01:16:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:16:22 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-02 01:16:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-02 01:16:22 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.610305 2012.0904942707937 18.999933 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.799999999999997 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 1 10.409445331648655 14.817283661094795 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 2 10.412469614194551 14.729653817377763 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 3 10.419683294823855 14.711862905939682 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 4 10.423891757430944 14.782950654870874 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 5 10.420838041094317 14.870977065475211 2012-Feb-02 01:16:22 LOG4 log_alfabeam: ALFABEAM 6 10.413605526234692 14.887518332053034 2012-Feb-02 01:16:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300055 2012-Feb-02 01:16:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:16:23 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Feb-02 01:16:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2012-Feb-02 01:16:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.49357910 MHz ...} 2012-Feb-02 01:16:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18984.00 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:16:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.170 (still bad) 2012-Feb-02 01:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 01:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-02 01:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 01:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-02 01:16:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:16:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:16:34 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Feb-02 01:16:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:16:34 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Feb-02 01:16:34 INFO3 smartfreq: Taking CAL-OFF at 1380.88420410 MHz ... 2012-Feb-02 01:16:34 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-02 01:16:34 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-02 01:16:34 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:16:34 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09049 J 2012-Feb-02 01:16:34 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:16:34 LOG2 antvel: Parameters to Doppler: Topocentric 18994 2012 33 0.0 2012-Feb-02 01:16:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:16:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-02 01:16:34 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-02 01:16:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:16:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:16:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:16:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.88420410 MHz}' 2012-Feb-02 01:16:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:16:34 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2012-Feb-02 01:16:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-02 01:16:34 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.613647 2012.0904946510509 18.999933 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666670 14.799999999999997 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 1 10.409446574364800 14.817392376823356 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 2 10.412464552783030 14.729717981812342 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 3 10.419676936089294 14.711816592453472 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 4 10.423890547008600 14.782842983765029 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 5 10.420843039907901 14.870915791079904 2012-Feb-02 01:16:34 LOG4 log_alfabeam: ALFABEAM 6 10.413611682653899 14.887562958061089 2012-Feb-02 01:16:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300056 2012-Feb-02 01:16:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:16:35 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2012-Feb-02 01:16:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:16:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:16:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.88420410 MHz ...} 2012-Feb-02 01:16:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18996.00 2012-Feb-02 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 01:16:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:16:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:16:46 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2012-Feb-02 01:16:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:16:46 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2012-Feb-02 01:16:46 INFO3 smartfreq: Taking CAL-OFF at 1381.86076660 MHz ... 2012-Feb-02 01:16:46 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-02 01:16:46 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-02 01:16:46 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:16:46 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:16:46 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:16:46 LOG2 antvel: Parameters to Doppler: Topocentric 19006 2012 33 0.0 2012-Feb-02 01:16:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:16:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-02 01:16:46 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-02 01:16:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:16:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:16:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:16:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1381.86076660 MHz}' 2012-Feb-02 01:16:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:16:46 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2012-Feb-02 01:16:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-02 01:16:46 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.616990 2012.0904950313079 18.999933 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 1 10.409447835791992 14.817502020884339 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 2 10.412459452024191 14.729782781743268 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 3 10.419670518589159 14.711769974442449 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 4 10.423889318289250 14.782734391151449 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 5 10.420848078053188 14.870853905573053 2012-Feb-02 01:16:46 LOG4 log_alfabeam: ALFABEAM 6 10.413617896013553 14.887607882636985 2012-Feb-02 01:16:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300057 2012-Feb-02 01:16:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:16:47 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Feb-02 01:16:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:16:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:16:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1381.86076660 MHz ...} 2012-Feb-02 01:16:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19008.00 2012-Feb-02 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:16:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-02 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-02 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Feb-02 01:16:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 01:16:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.068 0.884 0.963 2012-Feb-02 01:16:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.090 0.953 0.967 1.075 2012-Feb-02 01:16:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.925 1.108 1.054 2012-Feb-02 01:16:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.021 0.912 0.021 2012-Feb-02 01:16:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:16:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:16:58 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Feb-02 01:16:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:16:58 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2012-Feb-02 01:16:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2012-Feb-02 01:16:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 01:16:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 01:16:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:16:58 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2012-Feb-02 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Feb-02 01:16:58 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:16:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 01:16:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:16:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:16:58 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2012-Feb-02 01:16:58 INFO3 smartfreq: Taking CAL-ON at 1375.80607910 MHz ... 2012-Feb-02 01:16:58 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-02 01:16:58 INFO4 set_smart_frequency: Setting frequency 1375.80607910 MHz 2012-Feb-02 01:16:58 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:16:58 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:16:58 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:16:58 LOG2 antvel: Parameters to Doppler: Topocentric 19018 2012 33 0.0 2012-Feb-02 01:16:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:16:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1375.80607910 rest0=1375.80607910 rest1=1375.80607910 rest2=1375.80607910 rest3=1375.80607910 rest4=1375.80607910 rest5=1375.80607910 rest6=1375.80607910 rest7=1375.80607910 2012-Feb-02 01:16:58 INFO4 dopset_gen: New sky frequencies: 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 1375.806079 2012-Feb-02 01:16:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1375.806079 sky0=1375.806079 sky1=1375.806079 sky2=1375.806079 sky3=1375.806079 sky4=1375.806079 sky5=1375.806079 sky6=1375.806079 sky7=1375.806079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:16:58 LOG2 dopset_gen: Result from 'sky2syn': 1625.806079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:16:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:16:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1375.80607910 MHz}' 2012-Feb-02 01:16:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:16:58 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Feb-02 01:16:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1375.80607910 MHz ...} 2012-Feb-02 01:16:58 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.620332 2012.0904954115649 18.999933 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999986 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 1 10.409449115488451 14.817612537085656 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 2 10.412454314629372 14.729848186183256 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 3 10.419664045499200 14.711723078081683 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 4 10.423888071701352 14.782624932644817 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 5 10.420853152861987 14.870791438464405 2012-Feb-02 01:16:58 LOG4 log_alfabeam: ALFABEAM 6 10.413624163238804 14.887653080648473 2012-Feb-02 01:16:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300058 2012-Feb-02 01:16:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:16:59 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-02 01:16:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:16:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1625806079.0} 2012-Feb-02 01:16:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:16:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:16:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1375.80607910 MHz ...} 2012-Feb-02 01:16:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19020.00 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1625.806079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:17:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1375.806079 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.600 (still bad) 2012-Feb-02 01:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.598 (still bad) 2012-Feb-02 01:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.603 (still bad) 2012-Feb-02 01:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.600 (still bad) 2012-Feb-02 01:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.597 (still bad) 2012-Feb-02 01:17:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:17:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:17:10 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2012-Feb-02 01:17:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:17:10 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Feb-02 01:17:10 INFO3 smartfreq: Taking CAL-ON at 1378.54045410 MHz ... 2012-Feb-02 01:17:10 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-02 01:17:10 INFO4 set_smart_frequency: Setting frequency 1378.54045410 MHz 2012-Feb-02 01:17:10 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:17:10 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:17:10 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:17:10 LOG2 antvel: Parameters to Doppler: Topocentric 19030 2012 33 0.0 2012-Feb-02 01:17:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:17:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.54045410 rest0=1378.54045410 rest1=1378.54045410 rest2=1378.54045410 rest3=1378.54045410 rest4=1378.54045410 rest5=1378.54045410 rest6=1378.54045410 rest7=1378.54045410 2012-Feb-02 01:17:10 INFO4 dopset_gen: New sky frequencies: 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 1378.540454 2012-Feb-02 01:17:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.540454 sky0=1378.540454 sky1=1378.540454 sky2=1378.540454 sky3=1378.540454 sky4=1378.540454 sky5=1378.540454 sky6=1378.540454 sky7=1378.540454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:17:10 LOG2 dopset_gen: Result from 'sky2syn': 1628.540454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:17:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:17:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.54045410 MHz}' 2012-Feb-02 01:17:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:17:10 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-02 01:17:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.54045410 MHz ...} 2012-Feb-02 01:17:10 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.623675 2012.0904957918219 18.999933 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.800000000000002 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 1 10.409450414539180 14.817724001097286 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 2 10.412449137180191 14.729914242181536 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 3 10.419657512271858 14.711675873590707 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 4 10.423886806186049 14.782514533260196 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 5 10.420858267721064 14.870728344732456 2012-Feb-02 01:17:10 LOG4 log_alfabeam: ALFABEAM 6 10.413630488732432 14.887698580891332 2012-Feb-02 01:17:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300059 2012-Feb-02 01:17:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:17:11 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Feb-02 01:17:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:17:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628540454.0} 2012-Feb-02 01:17:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.54045410 MHz ...} 2012-Feb-02 01:17:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19032.00 2012-Feb-02 01:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.599 (still bad) 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.540454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:17:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.540454 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.660 (still bad) 2012-Feb-02 01:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.661 (still bad) 2012-Feb-02 01:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.663 (still bad) 2012-Feb-02 01:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.662 (still bad) 2012-Feb-02 01:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.662 (still bad) 2012-Feb-02 01:17:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:17:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:17:22 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Feb-02 01:17:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:17:22 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2012-Feb-02 01:17:22 INFO3 smartfreq: Taking CAL-ON at 1378.73576660 MHz ... 2012-Feb-02 01:17:22 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-02 01:17:22 INFO4 set_smart_frequency: Setting frequency 1378.73576660 MHz 2012-Feb-02 01:17:22 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:17:22 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:17:22 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:17:22 LOG2 antvel: Parameters to Doppler: Topocentric 19042 2012 33 0.0 2012-Feb-02 01:17:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:17:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1378.73576660 rest0=1378.73576660 rest1=1378.73576660 rest2=1378.73576660 rest3=1378.73576660 rest4=1378.73576660 rest5=1378.73576660 rest6=1378.73576660 rest7=1378.73576660 2012-Feb-02 01:17:22 INFO4 dopset_gen: New sky frequencies: 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 1378.735767 2012-Feb-02 01:17:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1378.735767 sky0=1378.735767 sky1=1378.735767 sky2=1378.735767 sky3=1378.735767 sky4=1378.735767 sky5=1378.735767 sky6=1378.735767 sky7=1378.735767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:17:22 LOG2 dopset_gen: Result from 'sky2syn': 1628.735767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:17:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:17:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1378.73576660 MHz}' 2012-Feb-02 01:17:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:17:22 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Feb-02 01:17:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1378.73576660 MHz ...} 2012-Feb-02 01:17:22 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.627017 2012.0904961720789 18.999933 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.800000000000002 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 1 10.409451732492345 14.817836355888659 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 2 10.412443922426759 14.729980918251480 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 3 10.419650922132149 14.711628387495781 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 4 10.423885522181557 14.782403249443441 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 5 10.420863419923780 14.870664654364946 2012-Feb-02 01:17:22 LOG4 log_alfabeam: ALFABEAM 6 10.413636869371807 14.887744357892446 2012-Feb-02 01:17:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300060 2012-Feb-02 01:17:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:17:23 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-02 01:17:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:17:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1628735767.0} 2012-Feb-02 01:17:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1378.73576660 MHz ...} 2012-Feb-02 01:17:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19044.00 2012-Feb-02 01:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.668 (still bad) 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1628.735767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1378.735767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.654 (still bad) 2012-Feb-02 01:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.657 (still bad) 2012-Feb-02 01:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.655 (still bad) 2012-Feb-02 01:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.653 (still bad) 2012-Feb-02 01:17:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:17:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:17:34 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Feb-02 01:17:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:17:34 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Feb-02 01:17:34 INFO3 smartfreq: Taking CAL-ON at 1379.32170410 MHz ... 2012-Feb-02 01:17:34 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-02 01:17:34 INFO4 set_smart_frequency: Setting frequency 1379.32170410 MHz 2012-Feb-02 01:17:34 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:17:34 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:17:34 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:17:34 LOG2 antvel: Parameters to Doppler: Topocentric 19054 2012 33 0.0 2012-Feb-02 01:17:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:17:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1379.32170410 rest0=1379.32170410 rest1=1379.32170410 rest2=1379.32170410 rest3=1379.32170410 rest4=1379.32170410 rest5=1379.32170410 rest6=1379.32170410 rest7=1379.32170410 2012-Feb-02 01:17:34 INFO4 dopset_gen: New sky frequencies: 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 1379.321704 2012-Feb-02 01:17:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1379.321704 sky0=1379.321704 sky1=1379.321704 sky2=1379.321704 sky3=1379.321704 sky4=1379.321704 sky5=1379.321704 sky6=1379.321704 sky7=1379.321704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:17:34 LOG2 dopset_gen: Result from 'sky2syn': 1629.321704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:17:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:17:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1379.32170410 MHz}' 2012-Feb-02 01:17:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:17:34 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2012-Feb-02 01:17:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1379.32170410 MHz ...} 2012-Feb-02 01:17:34 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.630360 2012.0904965523362 18.999933 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999988 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 1 10.409453070468611 14.817949678484361 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 2 10.412438666897229 14.730048262460242 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 3 10.419644270442168 14.711580589664930 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 4 10.423884218594116 14.782291004863573 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 5 10.420868612910761 14.870600321358722 2012-Feb-02 01:17:34 LOG4 log_alfabeam: ALFABEAM 6 10.413643309647270 14.887790440796691 2012-Feb-02 01:17:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300061 2012-Feb-02 01:17:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:17:35 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-02 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.655 (still bad) 2012-Feb-02 01:17:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:17:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1629321704.0} 2012-Feb-02 01:17:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1379.32170410 MHz ...} 2012-Feb-02 01:17:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19056.00 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1629.321704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.655 (still bad) 2012-Feb-02 01:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1379.321704 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.625 (still bad) 2012-Feb-02 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.622 (still bad) 2012-Feb-02 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.626 (still bad) 2012-Feb-02 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.623 (still bad) 2012-Feb-02 01:17:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:17:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:17:46 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2012-Feb-02 01:17:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:17:46 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2012-Feb-02 01:17:46 INFO3 smartfreq: Taking CAL-ON at 1380.49357910 MHz ... 2012-Feb-02 01:17:46 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-02 01:17:46 INFO4 set_smart_frequency: Setting frequency 1380.49357910 MHz 2012-Feb-02 01:17:46 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:17:46 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:17:46 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:17:46 LOG2 antvel: Parameters to Doppler: Topocentric 19066 2012 33 0.0 2012-Feb-02 01:17:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:17:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.49357910 rest0=1380.49357910 rest1=1380.49357910 rest2=1380.49357910 rest3=1380.49357910 rest4=1380.49357910 rest5=1380.49357910 rest6=1380.49357910 rest7=1380.49357910 2012-Feb-02 01:17:46 INFO4 dopset_gen: New sky frequencies: 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 1380.493579 2012-Feb-02 01:17:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.493579 sky0=1380.493579 sky1=1380.493579 sky2=1380.493579 sky3=1380.493579 sky4=1380.493579 sky5=1380.493579 sky6=1380.493579 sky7=1380.493579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:17:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.493579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:17:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:17:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.49357910 MHz}' 2012-Feb-02 01:17:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:17:46 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Feb-02 01:17:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.49357910 MHz ...} 2012-Feb-02 01:17:46 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.633702 2012.0904969325932 18.999933 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666666 14.799999999999995 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 1 10.409454428005894 14.818063911000021 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 2 10.412433373381193 14.730116242812347 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 3 10.419637560477149 14.711532506981859 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 4 10.423882895871921 14.782177856813020 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 5 10.420873843936224 14.870535376188782 2012-Feb-02 01:17:46 LOG4 log_alfabeam: ALFABEAM 6 10.413649806387538 14.887836803784177 2012-Feb-02 01:17:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300062 2012-Feb-02 01:17:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:17:47 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-02 01:17:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:17:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630493579.0} 2012-Feb-02 01:17:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.630 (still bad) 2012-Feb-02 01:17:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19068.00 2012-Feb-02 01:17:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.49357910 MHz ...} 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.493579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:17:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.493579 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.630 (still bad) 2012-Feb-02 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.561 (still bad) 2012-Feb-02 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.571 (still bad) 2012-Feb-02 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.565 (still bad) 2012-Feb-02 01:17:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 01:17:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.448 1.458 1.191 1.288 2012-Feb-02 01:17:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.514 1.326 1.360 1.475 2012-Feb-02 01:17:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.969 1.304 1.567 1.433 2012-Feb-02 01:17:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.482 0.021 1.288 0.021 2012-Feb-02 01:17:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:17:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:17:58 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2012-Feb-02 01:17:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:17:58 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2012-Feb-02 01:17:58 INFO3 smartfreq: Taking CAL-ON at 1380.88420410 MHz ... 2012-Feb-02 01:17:58 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-02 01:17:58 INFO4 set_smart_frequency: Setting frequency 1380.88420410 MHz 2012-Feb-02 01:17:58 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:17:58 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:17:58 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:17:58 LOG2 antvel: Parameters to Doppler: Topocentric 19078 2012 33 0.0 2012-Feb-02 01:17:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:17:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.88420410 rest0=1380.88420410 rest1=1380.88420410 rest2=1380.88420410 rest3=1380.88420410 rest4=1380.88420410 rest5=1380.88420410 rest6=1380.88420410 rest7=1380.88420410 2012-Feb-02 01:17:58 INFO4 dopset_gen: New sky frequencies: 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 1380.884204 2012-Feb-02 01:17:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.884204 sky0=1380.884204 sky1=1380.884204 sky2=1380.884204 sky3=1380.884204 sky4=1380.884204 sky5=1380.884204 sky6=1380.884204 sky7=1380.884204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:17:58 LOG2 dopset_gen: Result from 'sky2syn': 1630.884204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:17:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:17:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.88420410 MHz}' 2012-Feb-02 01:17:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:17:58 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Feb-02 01:17:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.88420410 MHz ...} 2012-Feb-02 01:17:58 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.637044 2012.0904973128502 18.999933 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999997 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 1 10.409455805846521 14.818179097235985 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 2 10.412428039954246 14.730184887782050 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 3 10.419630789541618 14.711484123483718 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 4 10.423881553289668 14.782063761866160 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 5 10.420879114912420 14.870469791562591 2012-Feb-02 01:17:58 LOG4 log_alfabeam: ALFABEAM 6 10.413656362202245 14.887883462345533 2012-Feb-02 01:17:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300063 2012-Feb-02 01:17:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:17:59 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-02 01:17:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:17:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630884204.0} 2012-Feb-02 01:17:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:17:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:17:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.88420410 MHz ...} 2012-Feb-02 01:17:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19080.00 2012-Feb-02 01:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.568 (still bad) 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.884204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:18:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.884204 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.554 (still bad) 2012-Feb-02 01:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.552 (still bad) 2012-Feb-02 01:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.555 (still bad) 2012-Feb-02 01:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.549 (still bad) 2012-Feb-02 01:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.552 (still bad) 2012-Feb-02 01:18:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:18:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:18:10 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Feb-02 01:18:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:18:10 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Feb-02 01:18:10 INFO3 smartfreq: Taking CAL-ON at 1381.86076660 MHz ... 2012-Feb-02 01:18:10 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-02 01:18:10 INFO4 set_smart_frequency: Setting frequency 1381.86076660 MHz 2012-Feb-02 01:18:10 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:18:10 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:18:10 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:18:10 LOG2 antvel: Parameters to Doppler: Topocentric 19090 2012 33 0.0 2012-Feb-02 01:18:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:18:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.86076660 rest0=1381.86076660 rest1=1381.86076660 rest2=1381.86076660 rest3=1381.86076660 rest4=1381.86076660 rest5=1381.86076660 rest6=1381.86076660 rest7=1381.86076660 2012-Feb-02 01:18:10 INFO4 dopset_gen: New sky frequencies: 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 1381.860767 2012-Feb-02 01:18:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.860767 sky0=1381.860767 sky1=1381.860767 sky2=1381.860767 sky3=1381.860767 sky4=1381.860767 sky5=1381.860767 sky6=1381.860767 sky7=1381.860767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:18:10 LOG2 dopset_gen: Result from 'sky2syn': 1631.860767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:18:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:18:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:18:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1381.86076660 MHz}' 2012-Feb-02 01:18:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2012-Feb-02 01:18:10 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2012-Feb-02 01:18:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1381.86076660 MHz ...} 2012-Feb-02 01:18:10 LOG5 log_alfabeam: Parameters: 10.416666666666666 14.800000000000001 9.640387 2012.0904976931072 18.999933 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 0 10.416666666666664 14.799999999999997 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 1 10.409457204764026 14.818295282268229 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 2 10.412422664640530 14.730254226776452 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 3 10.419623954856352 14.711435422850222 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 4 10.423880190091541 14.781948675330222 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 5 10.420884427803356 14.870403539288841 2012-Feb-02 01:18:10 LOG4 log_alfabeam: ALFABEAM 6 10.413662979782226 14.887930432324810 2012-Feb-02 01:18:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 203300064 2012-Feb-02 01:18:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2012-Feb-02 01:18:11 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2012-Feb-02 01:18:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:18:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631860767.0} 2012-Feb-02 01:18:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:18:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1381.86076660 MHz ...} 2012-Feb-02 01:18:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19092.00 2012-Feb-02 01:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.552 (still bad) 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.860767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:18:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.860767 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.538 (still bad) 2012-Feb-02 01:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.540 (still bad) 2012-Feb-02 01:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.539 (still bad) 2012-Feb-02 01:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.537 (still bad) 2012-Feb-02 01:18:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:18:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2012-Feb-02 01:18:22 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2012-Feb-02 01:18:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2012-Feb-02 01:18:22 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2012-Feb-02 01:18:22 INFO2 smartfreq: Switching off CAL 2012-Feb-02 01:18:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:18:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:18:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:18:22 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2012-Feb-02 01:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.539 (still bad) 2012-Feb-02 01:18:22 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:18:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:18:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:18:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:18:22 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2012-Feb-02 01:18:22 INFO3 restore_frequencies: Restoring original frequencies 2012-Feb-02 01:18:22 LOG5 antvel: Calling 'antvel 102500.000000 144800.000000 J Topocentric 0' 2012-Feb-02 01:18:22 LOG2 antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:18:22 LOG2 antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:18:22 LOG2 antvel: Parameters to Doppler: Topocentric 19102 2012 33 0.0 2012-Feb-02 01:18:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:18:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1381.2 rest0=1381.2 rest1=1381.2 rest2=1381.2 rest3=1381.2 rest4=1381.2 rest5=1381.2 rest6=1381.2 rest7=1381.2 2012-Feb-02 01:18:22 INFO4 dopset_gen: New sky frequencies: 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 1381.200000 2012-Feb-02 01:18:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.200000 sky0=1381.200000 sky1=1381.200000 sky2=1381.200000 sky3=1381.200000 sky4=1381.200000 sky5=1381.200000 sky6=1381.200000 sky7=1381.200000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:18:22 LOG2 dopset_gen: Result from 'sky2syn': 1631.200000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:18:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-02 01:18:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:18:22 STOP finish_task: Finishing task 'smart frequency switching' 2012-Feb-02 01:18:22 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-02 01:18:22 DONE finish_task: DONE finished pattern: smart frequency switching 2012-Feb-02 01:18:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:18:22 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2012-Feb-02 01:18:22 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2012-Feb-02 01:18:22 COMMAND run_command_line: EXECUTING command 28: 'LOAD ages_mock.conf' 2012-Feb-02 01:18:22 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Feb-02 01:18:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631200000.0} 2012-Feb-02 01:18:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 01:18:23 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Feb-02 01:18:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:23 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2012-Feb-02 01:18:23 LOG2 CIMA-antvel: Precessing RA = 10:25:00.0 Dec = +14:48:00.0 Epoch = 2012.09050 J 2012-Feb-02 01:18:23 LOG2 CIMA-antvel: Computed apparent RA = 10:25:41.2 Dec = +14:44:02.7 2012-Feb-02 01:18:23 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 19102 2012 33 0.0 2012-Feb-02 01:18:23 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Feb-02 01:18:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Feb-02 01:18:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2012-Feb-02 01:18:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 01:18:25 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Feb-02 01:18:25 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-02 01:18:25 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Feb-02 01:18:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Feb-02 01:18:26 LOG1 config_iflo: Receiver ALFA already selected 2012-Feb-02 01:18:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:18:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:18:26 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:18:26 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Feb-02 01:18:26 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:18:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:18:26 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2012-Feb-02 01:18:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:18:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:18:26 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2012-Feb-02 01:18:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2012-Feb-02 01:18:26 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Feb-02 01:18:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2012-Feb-02 01:18:26 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2012-Feb-02 01:18:26 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2012-Feb-02 01:18:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Feb-02 01:18:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:18:26 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Feb-02 01:18:26 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:26 LOG4 got_cormsg: From DATATAKING: vw% DONE 2012-Feb-02 01:18:26 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Feb-02 01:18:26 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2012-Feb-02 01:18:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Feb-02 01:18:26 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Feb-02 01:18:26 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-02 01:18:26 DONE finish_task: DONE finished configuration: IF/LO path 2012-Feb-02 01:18:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:18:27 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Feb-02 01:18:27 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Feb-02 01:18:27 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Feb-02 01:18:27 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Feb-02 01:18:27 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-02 01:18:27 START begin_task: Starting task 'selecting calibration port' 2012-Feb-02 01:18:27 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-02 01:18:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-02 01:18:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:18:27 START begin_task: Starting task 'waiting on calport' 2012-Feb-02 01:18:27 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:27 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-02 01:18:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:27 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:18:27 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-02 01:18:27 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-02 01:18:27 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-02 01:18:27 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:18:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:18:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:18:27 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:18:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:18:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:18:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:18:27 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:18:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:18:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-02 01:18:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-02 01:18:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:18:27 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Feb-02 01:18:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Feb-02 01:18:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Feb-02 01:18:28 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:18:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 01:18:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:18:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:18:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:18:28 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG3 sock_errsend: To WAPPDATA: FLUSH 2012-Feb-02 01:18:28 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Feb-02 01:18:28 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Feb-02 01:18:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:18:28 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Feb-02 01:18:28 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2012-Feb-02 01:18:28 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2012-Feb-02 01:18:28 INFO1 config_mock: Starting to configure the Mock spectrometer 2012-Feb-02 01:18:28 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Feb-02 01:18:28 START begin_task: Starting task 'selecting calibration port' 2012-Feb-02 01:18:28 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG3 vw_send: To DATATAKING: calport 3 2012-Feb-02 01:18:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Feb-02 01:18:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:18:28 START begin_task: Starting task 'waiting on calport' 2012-Feb-02 01:18:28 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2012-Feb-02 01:18:28 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Feb-02 01:18:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:28 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:18:28 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Feb-02 01:18:28 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Feb-02 01:18:28 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Feb-02 01:18:28 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:18:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:18:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:18:28 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:28 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:18:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:18:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:18:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:18:28 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Feb-02 01:18:28 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Feb-02 01:18:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:18:28 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:18:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:18:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:18:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:18:28 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Feb-02 01:18:28 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2012-Feb-02 01:18:28 LOG3 socket_wait: To MOCK: NOP 2012-Feb-02 01:18:28 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2012-Feb-02 01:18:28 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Feb-02 01:18:29 ALERT got_mock_message: Mock spectrometer restarting 2012-Feb-02 01:18:29 LOG4 from_mock: From MOCK: nop ok 2012-Feb-02 01:18:29 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2012-Feb-02 01:18:29 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2012-Feb-02 01:18:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2012-Feb-02 01:18:30 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2012-Feb-02 01:18:30 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2012-Feb-02 01:18:30 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2012-Feb-02 01:18:30 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2012-Feb-02 01:18:30 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2012-Feb-02 01:18:30 LOG4 from_mock: From MOCK: confok 2012-Feb-02 01:18:30 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2012-Feb-02 01:18:30 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2012-Feb-02 01:18:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2012-Feb-02 01:18:30 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2012-Feb-02 01:18:30 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2012-Feb-02 01:18:30 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2012-Feb-02 01:18:30 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Feb-02 01:18:30 LOG4 from_mock: From MOCK: confok 2012-Feb-02 01:18:30 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2012-Feb-02 01:18:30 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2012-Feb-02 01:18:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2012-Feb-02 01:18:30 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2012-Feb-02 01:18:30 LOG5 finish_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-02 01:18:30 DONE finish_task: DONE finished configuring: the Mock spectrometer 2012-Feb-02 01:18:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 01:18:31 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2012-Feb-02 01:18:31 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2012-Feb-02 01:18:31 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Feb-02 01:18:31 COMMAND run_command_line: EXECUTING command 29: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2012-Feb-02 01:18:31 COMMAND run_command_line: EXECUTING command 30: 'CATALOG AGESFull.cat' 2012-Feb-02 01:18:31 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Feb-02 01:18:31 COMMAND run_command_line: EXECUTING command 33: 'IF LSTSLEW(AGESLEO_p1_043) < 093839 THEN' 2012-Feb-02 01:18:32 LOG3 is_if_valid: Current source data: up 646.8 14.4 UP - - 136 1.1 2012-Feb-02 01:18:32 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESLEO_p1_043) < 093839 2012-Feb-02 01:18:32 INFO5 is_if_valid: Condition parsed as: 9.6642913333333329 < 9.644166666666667 2012-Feb-02 01:18:32 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGESLEO_p1_043) < 093839 THEN' 2012-Feb-02 01:18:32 COMMAND run_command_line: EXECUTING command 34: 'FIXEDDRIFT az=286.76 alfaangle=85.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_043 ra=103500.00 dec=134500.00' 2012-Feb-02 01:18:32 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=286.76 alfaangle=85.3 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_043 ra=103500.00 dec=134500.00' in non-true conditional branch 2012-Feb-02 01:18:32 COMMAND run_command_line: EXECUTING command 37: 'ENDIF' 2012-Feb-02 01:18:32 COMMAND run_command_line: EXECUTING command 40: 'IF LSTSLEW(AGESLEO_p1_049) < 100209 THEN' 2012-Feb-02 01:18:34 LOG3 is_if_valid: Current source data: up 647.4 14.5 UP - - 136 1.1 2012-Feb-02 01:18:34 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGESLEO_p1_049) < 100209 2012-Feb-02 01:18:34 INFO5 is_if_valid: Condition parsed as: 9.6642913333333329 < 10.035833333333333 2012-Feb-02 01:18:34 COMMAND run_command_line: EXECUTING command 41: 'FIXEDDRIFT az=299.70 alfaangle=73.0 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGESLEO_p1_049 ra=103500.00 dec=133600.00' 2012-Feb-02 01:18:34 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-02 01:18:34 WARNING check_obsmode: WARNING failed to get a response from the CIMA frontend when checking options for 'fixed azimuth drift map'! 2012-Feb-02 01:18:34 NOTE check_obsmode: Assuming that the options are OK 2012-Feb-02 01:18:34 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 299.70 73.0 hcorcal 5 tracking no off lcorcal first 1 AGESLEO_p1_049 103500.00 133600.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 01:18:34 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-02 01:18:34 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-02 01:18:34 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'galfasrc' 2012-Feb-02 01:18:34 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-02 01:18:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGESLEO_p1_049} 2012-Feb-02 01:18:34 INFO3 fixed_driftmap: Sending telescope to Az = 299.70 and ZA = 9.38 2012-Feb-02 01:18:34 LOG3 track_source: Calling 'track_source AGESLEO_p1_049 299.70 9.3829118778 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 01:18:34 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 01:18:34 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-02 01:18:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_049} INFO {Slewing to source 'AGESLEO_p1_049' ...} 2012-Feb-02 01:18:34 INFO1 track_source: Starting to track AGESLEO_p1_049 2012-Feb-02 01:18:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_049" 2012-Feb-02 01:18:34 LOG3 vw_send: To DATATAKING: set ra 299.70 2012-Feb-02 01:18:34 LOG3 vw_send: To DATATAKING: set dec 9.3829118778 2012-Feb-02 01:18:34 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 01:18:34 LOG3 vw_send: To DATATAKING: pnt tr 299.70 9.3829118778 -CF 2012-Feb-02 01:18:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 01:18:34 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 01:18:34 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-02 01:18:34 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 01:18:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:18:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 01:18:34 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Feb-02 01:18:34 START begin_task: Starting task 'rotate ALFA to +73 degrees' 2012-Feb-02 01:18:34 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-02 01:18:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +73 degrees ...} 2012-Feb-02 01:18:34 INFO2 rotate_alfa: ALFA commanded to +73.0 degrees 2012-Feb-02 01:18:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION 73.0 REPLY 2012-Feb-02 01:18:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-02 01:18:34 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-02 01:18:34 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-02 01:18:34 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 01:18:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_049" 2012-Feb-02 01:18:34 LOG4 got_cormsg: From DATATAKING: set ra 299.70 2012-Feb-02 01:18:34 LOG4 got_cormsg: From DATATAKING: set dec 9.3829118778 2012-Feb-02 01:18:34 LOG4 got_cormsg: From DATATAKING: vw% 299.70 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: vw% 9.3829118778 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: pnt tr 299.70 9.3829118778 -CF 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 01:18:35 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:19:06 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-02 01:19:06 INFO3 alfa_motor: ALFA rotator in-position +73.00 degrees 2012-Feb-02 01:19:06 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-02 01:19:06 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2012-Feb-02 01:19:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:19:06 STOP finish_task: Finishing task 'rotate ALFA to +73 degrees' 2012-Feb-02 01:19:06 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-02 01:19:06 INFO2 finish_task: DONE finished configuration: rotating ALFA to +73 degrees 2012-Feb-02 01:19:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:19:06 STOP end_task: Finishing task 'rotate ALFA to +73 degrees' with status 'OK' 2012-Feb-02 01:19:06 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Feb-02 01:19:06 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 01:19:06 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-02 01:19:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 01:19:06 LOG3 waittrk: Start waittrk 5 2012-Feb-02 01:19:06 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 01:19:06 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-02 01:19:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 01:19:11 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Feb-02 01:19:11 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 01:19:11 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Feb-02 01:19:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 01:19:42 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Feb-02 01:19:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:19:42 INFO2 waittrk: Now tracking AGESLEO_p1_049 2012-Feb-02 01:19:42 LOG4 waittrk: Current telescope position: Az = 659.29 ZA = 9.37 2012-Feb-02 01:19:42 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 01:19:42 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-02 01:19:42 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 01:19:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:19:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 01:19:42 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Feb-02 01:19:42 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 01:19:42 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Feb-02 01:19:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 01:19:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 01:19:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:19:42 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 01:19:42 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2012-Feb-02 01:19:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 01:19:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:19:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:19:43 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:19:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 01:19:43 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2012-Feb-02 01:19:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 01:19:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:19:43 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 01:19:43 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:19:43 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Feb-02 01:19:43 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:19:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:19:43 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Feb-02 01:19:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:19:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 01:19:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:19:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:19:43 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:19:43 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Feb-02 01:19:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:19:43 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:19:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:19:43 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Feb-02 01:19:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:19:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:19:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 01:19:43 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Feb-02 01:19:43 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-02 01:19:43 INFO2 astwait: Waiting for 1268 seconds from 05:19:43 to 05:40:51 UTC ... 2012-Feb-02 01:19:43 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1268 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 01:19:43 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-02 01:19:43 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-02 01:40:51 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 INFO3 astwait: Finished waiting 2012-Feb-02 01:40:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:40:51 LOG5 dopset_later: Calling 'dopset_later 61.496908959923147' 2012-Feb-02 01:40:51 INFO3 dopset_later: Setting Doppler correction for 01:41:51 (61.5 seconds from now) 2012-Feb-02 01:40:51 LOG5 antvel: Calling 'antvel 299.700000 9.382912 F Heliocentric 61.496908959923147' 2012-Feb-02 01:40:51 LOG2 antvel: Transforming current Az = 299.70 ZA = 9.38 to apparent RA = 10:35:40.7 Dec = +13:31:58.6 2012-Feb-02 01:40:51 LOG2 antvel: Parameters to Doppler: Heliocentric 20511 2012 33 0.0 2012-Feb-02 01:40:51 INFO5 antvel: Computed antenna velocity: -11.90417 km/s 2012-Feb-02 01:40:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-11.9041727608 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-02 01:40:51 INFO4 dopset_gen: New sky frequencies: 1381.298277 1381.298277 1381.298277 1381.298277 1381.298277 1381.298277 1381.298277 1381.298277 1381.298277 2012-Feb-02 01:40:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.298277 sky0=1381.298277 sky1=1381.298277 sky2=1381.298277 sky3=1381.298277 sky4=1381.298277 sky5=1381.298277 sky6=1381.298277 sky7=1381.298277 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 01:40:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.298277 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631298277.0} 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:40:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-02 01:40:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-02 01:40:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 10:34:03.6 Dec = +13:35:44.2 2012-Feb-02 01:40:51 LOG3 track_source: Calling 'track_source AGESLEO_p1_049 103403.6 133544.2 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 01:40:51 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 01:40:51 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_049} INFO {Slewing to source 'AGESLEO_p1_049' ...} 2012-Feb-02 01:40:51 INFO1 track_source: Starting to track AGESLEO_p1_049 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_049" 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: set ra 103403.6 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: set dec 133544.2 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: pnt tr 103403.6 133544.2 -CJ 2012-Feb-02 01:40:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 01:40:51 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 01:40:51 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 01:40:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:40:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 01:40:51 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 01:40:51 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 01:40:51 LOG3 waittrk: Start waittrk 5 2012-Feb-02 01:40:51 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 01:40:51 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631298277.0} 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_049" 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: set ra 103403.6 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: set dec 133544.2 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: pnt tr 103403.6 133544.2 -CJ 2012-Feb-02 01:40:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% vw% 103403.6 2012-Feb-02 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% 133544.2 2012-Feb-02 01:40:52 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Feb-02 01:40:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 01:40:56 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2012-Feb-02 01:40:56 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 01:40:56 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Feb-02 01:40:59 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 01:40:59 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Feb-02 01:40:59 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:40:59 INFO2 waittrk: Now tracking AGESLEO_p1_049 2012-Feb-02 01:40:59 LOG4 waittrk: Current telescope position: Az = 659.38 ZA = 9.36 2012-Feb-02 01:40:59 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 01:40:59 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-02 01:40:59 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 01:40:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:40:59 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 01:40:59 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Feb-02 01:40:59 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-02 01:40:59 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-02 01:40:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-02 01:40:59 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-02 01:40:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-02 01:40:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-02 01:40:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:40:59 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-02 01:40:59 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-02 01:40:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-02 01:40:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:41:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:41:01 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:41:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-02 01:41:01 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2012-Feb-02 01:41:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-02 01:41:01 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 01:41:01 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-02 01:41:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 01:41:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:41:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:41:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:41:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 01:41:01 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-02 01:41:01 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-02 01:41:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-02 01:41:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:41:01 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-02 01:41:01 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 2 3 dB 2012-Feb-02 01:41:01 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-02 01:41:01 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-02 01:41:01 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-02 01:41:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-02 01:41:02 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2012-Feb-02 01:41:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.027 1.045 ALFA beam 1: 1.089 0.920 2012-Feb-02 01:41:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.895 0.949 ALFA beam 3: 0.996 1.041 2012-Feb-02 01:41:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.781 0.899 ALFA beam 5: 1.106 1.053 2012-Feb-02 01:41:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.017 0.014 ALFA beam 7: 1.104 0.014 2012-Feb-02 01:41:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 01:41:02 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-02 01:41:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-02 01:41:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:41:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 01:41:02 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Feb-02 01:41:02 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-02 01:41:02 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-02 01:41:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 01:41:02 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-02 01:41:02 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-02 01:41:02 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-02 01:41:02 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-02 01:41:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-02 01:41:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.045 1.089 0.920 2012-Feb-02 01:41:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.949 0.996 1.041 2012-Feb-02 01:41:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.899 1.106 1.053 2012-Feb-02 01:41:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.017 0.014 1.104 0.014 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.4 26.7 B 29.9 30.0 mn:A 0.2 -0.0 B -0.2 -0.3 gn: 11 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.9 30.5 B 27.9 29.5 mn:A 0.1 -0.5 B -0.8 0.1 gn: 12 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.7 27.8 B 33.1 28.7 mn:A 0.2 0.5 B 0.1 -0.1 gn: 7 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b1s1g0 rms:A 33.2 30.7 B 31.2 31.2 mn:A -0.6 -0.4 B 0.5 0.3 gn: 9 10 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.1 31.1 B 27.8 29.1 mn:A 0.0 -0.3 B 0.4 0.1 gn: 11 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.6 30.9 B 32.5 30.2 mn:A 0.3 -0.2 B -0.1 0.2 gn: 11 12 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.7 31.4 B 30.2 26.9 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 12 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.4 29.7 B 28.9 30.1 mn:A -0.3 0.4 B 0.3 0.2 gn: 12 12 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.5 B 28.8 28.9 mn:A -0.4 -0.3 B -0.5 0.0 gn: 13 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.4 B 31.4 30.2 mn:A 0.0 -0.0 B -0.3 0.1 gn: 16 13 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.4 30.2 B 29.7 29.7 mn:A 0.7 0.6 B 0.1 0.6 gn: 13 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.4 32.2 B 30.6 30.3 mn:A -0.2 0.2 B -0.1 0.3 gn: 13 11 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.1 28.4 B 14.1 14.5 mn:A -0.5 0.3 B 0.5 -0.3 gn: 13 31 2012-Feb-02 01:41:08 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.6 29.6 B 11.1 10.8 mn:A 0.7 0.4 B 0.1 0.2 gn: 14 31 2012-Feb-02 01:41:08 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-02 01:41:08 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-02 01:41:08 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-02 01:41:08 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-02 01:41:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:41:08 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-02 01:41:08 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 01:41:08 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-02 01:41:08 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-02 01:41:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:41:08 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-02 01:41:08 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:41:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:41:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:41:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 01:41:08 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-02 01:41:08 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-02 01:41:08 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-02 01:41:08 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 01:41:08 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 01:41:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 01:41:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:41:08 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 01:41:08 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2012-Feb-02 01:41:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 01:41:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 01:41:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 01:41:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:41:09 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 01:41:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:41:09 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 01:41:09 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:41:09 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:41:09 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:41:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 01:41:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 01:41:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:41:09 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 01:41:09 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 01:41:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-02 01:41:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 01:41:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 01:41:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:41:09 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:41:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 01:41:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-02 01:41:09 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 01:41:09 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-02 01:41:09 LOG5 log_alfabeam: Parameters: 10.567666666666668 13.595611111111115 10.024491 2012.0905413909804 72.999931 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 0 10.567666666666661 13.595611111111117 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 1 10.565382873972457 13.689587124683044 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 2 10.560776039397107 13.627555183644365 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 3 10.563005831963432 13.533411602027682 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 4 10.569886946766056 13.500975668513531 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 5 10.574572202136002 13.564155118162269 2012-Feb-02 01:41:09 LOG4 log_alfabeam: ALFABEAM 6 10.572297612919824 13.658624488087757 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_049 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: patternid=203300051 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: scanid=203300065 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456298277.0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306298277.0 2012-Feb-02 01:41:09 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 01:41:09 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 01:41:09 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGESLEO_p1_049:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203300051:scanid=203300065:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456298277.0:topobfreqhz=1306298277.0:filetype=1 2012-Feb-02 01:41:09 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 01:41:09 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 01:41:09 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 01:41:09 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 01:41:09 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 01:41:09 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20120202.a2048.0001.fits 2012-Feb-02 01:41:09 LOG4 from_mock: From MOCK: starok 2012-Feb-02 01:41:09 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 01:41:09 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Feb-02 01:41:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 01:41:09 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300065 2012-Feb-02 01:41:10 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 01:41:10 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Feb-02 01:41:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120202.a2048.0001.fits} 2012-Feb-02 01:41:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:41:10 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 01:41:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-02 01:41:10 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 01:41:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20471.00 2012-Feb-02 01:41:12 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 01:41:12 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 01:41:12 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:15 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:41:15.00 2012-Feb-02 01:41:15 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328161275.00 Thu Feb 2 01:41:15 2012 2012-Feb-02 01:41:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.298277 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.106 (still bad) 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:41:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:41:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 01:41:21 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 01:41:21 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 01:41:21 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 01:41:21 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 01:41:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 01:41:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 01:41:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 01:41:21 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 01:41:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 01:41:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 01:41:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 01:41:21 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-02 01:41:21 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 01:41:21 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-02 01:41:21 LOG5 log_alfabeam: Parameters: 10.567666666666668 13.595611111111115 10.027555 2012.0905417395493 72.999931 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 0 10.567666666666664 13.595611111111110 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 1 10.565397921542326 13.689663830710511 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 2 10.560781244894184 13.627792522215190 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 3 10.562995744338570 13.533573360028731 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 4 10.569871548436693 13.500898440275037 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 5 10.574567139555278 13.563919461857829 2012-Feb-02 01:41:21 LOG4 log_alfabeam: ALFABEAM 6 10.572307700802220 13.658467206716342 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_049 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: patternid=203300051 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: scanid=203300066 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456298277.0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306298277.0 2012-Feb-02 01:41:21 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 01:41:21 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 01:41:21 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGESLEO_p1_049:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203300051:scanid=203300066:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456298277.0:topobfreqhz=1306298277.0:filetype=1 2012-Feb-02 01:41:21 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 01:41:21 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 01:41:21 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 01:41:21 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 01:41:21 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 01:41:21 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 01:41:21 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 01:41:21 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG4 from_mock: From MOCK: starok 2012-Feb-02 01:41:21 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 01:41:21 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 01:41:21 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300066 2012-Feb-02 01:41:21 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 01:41:21 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Feb-02 01:41:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:41:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-02 01:41:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20482.00 2012-Feb-02 01:41:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 01:41:22 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 01:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.571 (still bad) 2012-Feb-02 01:41:24 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 01:41:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 01:41:24 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:24 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 01:41:27 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:41:27.01 2012-Feb-02 01:41:27 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328161287.01 Thu Feb 2 01:41:27 2012 2012-Feb-02 01:41:27 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.298277 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:41:27 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-02 01:41:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-02 01:41:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 01:41:33 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 01:41:33 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 01:41:33 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 01:41:33 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 01:41:33 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-02 01:41:33 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-02 01:41:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:41:33 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-02 01:41:33 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-02 01:41:33 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 299.70 and ZA = 9.38 2012-Feb-02 01:41:33 LOG3 track_source: Calling 'track_source AGESLEO_p1_049 299.70 9.3829118778 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 01:41:33 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 01:41:33 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGESLEO_p1_049} INFO {Slewing to source 'AGESLEO_p1_049' ...} 2012-Feb-02 01:41:33 INFO1 track_source: Starting to track AGESLEO_p1_049 2012-Feb-02 01:41:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGESLEO_p1_049" 2012-Feb-02 01:41:33 LOG3 vw_send: To DATATAKING: set ra 299.70 2012-Feb-02 01:41:33 LOG3 vw_send: To DATATAKING: set dec 9.3829118778 2012-Feb-02 01:41:33 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 01:41:33 LOG3 vw_send: To DATATAKING: pnt tr 299.70 9.3829118778 -CF 2012-Feb-02 01:41:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 01:41:33 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 01:41:33 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 01:41:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 01:41:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 01:41:33 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 LOG1 fixed_driftmap: Parameters: HA = -00:33:30.1 Start = 10:02:10.8 LST = 10:01:51.2 diff = 19.5 secs 2012-Feb-02 01:41:33 INFO2 fixed_driftmap: Waiting 17.5 seconds for RA 10:35:41 2012-Feb-02 01:41:33 INFO2 lstwait: Waiting for 17.5 secs from LST 10:01:51 to LST 10:02:09 ... 2012-Feb-02 01:41:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.500964378482383 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 01:41:33 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-02 01:41:33 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGESLEO_p1_049" 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: set ra 299.70 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: set dec 9.3829118778 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: vw% 299.70 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: vw% 9.3829118778 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: pnt tr 299.70 9.3829118778 -CF 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 01:41:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 01:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.103 (still bad) 2012-Feb-02 01:41:50 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-02 01:41:50 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Feb-02 01:41:50 LOG4 lstwait: Finished waiting 0.50 seconds late 2012-Feb-02 01:41:50 INFO3 lstwait: Finished waiting 2012-Feb-02 01:41:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 01:41:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-02 01:41:50 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-02 01:41:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-02 01:41:51 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-02 01:41:51 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 01:41:51 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Feb-02 01:41:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-02 01:41:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: object=AGESLEO_p1_049 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: patternid=203300067 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: scanid=203300067 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456298277.0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306298277.0 2012-Feb-02 01:41:51 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 01:41:51 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 01:41:51 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGESLEO_p1_049:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203300067:scanid=203300067:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456298277.0:topobfreqhz=1306298277.0:filetype=1 2012-Feb-02 01:41:51 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 01:41:51 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Feb-02 01:41:51 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 01:41:51 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 01:41:51 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Feb-02 01:41:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 01:41:51 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 01:41:51 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-02 01:41:51 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 01:41:51 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Feb-02 01:41:51 LOG4 from_mock: From MOCK: starok 2012-Feb-02 01:41:51 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 01:41:51 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Feb-02 01:41:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 01:41:51 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203300067 2012-Feb-02 01:41:51 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 01:41:51 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Feb-02 01:41:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 01:41:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 01:41:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 01:41:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-02 01:41:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20512.00 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.298277 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 01:41:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.298277 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 01:41:53 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 01:41:53 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-02 01:41:53 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Feb-02 01:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-02 01:41:56 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 01:41:56.01 2012-Feb-02 01:41:56 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328161316.01 Thu Feb 2 01:41:56 2012 2012-Feb-02 01:41:56 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 01:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.101 (still bad) 2012-Feb-02 01:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.102 (still bad) 2012-Feb-02 01:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.104 (still bad) 2012-Feb-02 01:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.108 (still bad) 2012-Feb-02 01:42:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 01:42:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.042 1.092 0.919 2012-Feb-02 01:42:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.950 0.996 1.042 2012-Feb-02 01:42:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.897 1.105 1.056 2012-Feb-02 01:42:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.021 1.093 0.022 2012-Feb-02 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2012-Feb-02 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2012-Feb-02 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2012-Feb-02 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2012-Feb-02 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Feb-02 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-02 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.107 (still bad) 2012-Feb-02 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2012-Feb-02 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.104 (still bad) 2012-Feb-02 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2012-Feb-02 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2012-Feb-02 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2012-Feb-02 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 01:43:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.044 1.100 0.924 2012-Feb-02 01:43:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.950 0.996 1.042 2012-Feb-02 01:43:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 0.904 1.102 1.055 2012-Feb-02 01:43:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.020 1.094 0.021 2012-Feb-02 01:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-02 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-02 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Feb-02 01:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-02 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-02 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Feb-02 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:44:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 01:44:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.047 1.096 0.921 2012-Feb-02 01:44:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.948 0.994 1.041 2012-Feb-02 01:44:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 0.898 1.101 1.055 2012-Feb-02 01:44:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.020 1.095 0.021 2012-Feb-02 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Feb-02 01:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-02 01:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 01:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2012-Feb-02 01:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2012-Feb-02 01:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2012-Feb-02 01:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2012-Feb-02 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2012-Feb-02 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2012-Feb-02 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2012-Feb-02 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2012-Feb-02 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2012-Feb-02 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-02 01:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2012-Feb-02 01:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-02 01:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-02 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 01:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:45:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 01:45:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.048 1.093 0.922 2012-Feb-02 01:45:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.898 0.948 0.994 1.041 2012-Feb-02 01:45:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.906 1.103 1.054 2012-Feb-02 01:45:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.020 1.095 0.021 2012-Feb-02 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Feb-02 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2012-Feb-02 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.105 (still bad) 2012-Feb-02 01:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.103 (still bad) 2012-Feb-02 01:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2012-Feb-02 01:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2012-Feb-02 01:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2012-Feb-02 01:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2012-Feb-02 01:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Feb-02 01:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-02 01:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 01:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-02 01:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 01:46:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-02 01:46:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.045 1.090 0.918 2012-Feb-02 01:46:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.947 0.994 1.040 2012-Feb-02 01:46:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 0.904 1.099 1.053 2012-Feb-02 01:46:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.010 0.022 1.094 0.022 2012-Feb-02 01:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2012-Feb-02 01:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-02 01:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.103 (still bad) 2012-Feb-02 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-02 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.099 (still bad) 2012-Feb-02 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2012-Feb-02 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.104 (still bad) 2012-Feb-02 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.103 (still bad) 2012-Feb-02 01:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:47:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 01:47:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 1.045 1.091 0.918 2012-Feb-02 01:47:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.947 1.004 1.051 2012-Feb-02 01:47:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 0.910 1.096 1.053 2012-Feb-02 01:47:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.020 1.094 0.020 2012-Feb-02 01:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Feb-02 01:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2012-Feb-02 01:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2012-Feb-02 01:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2012-Feb-02 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 01:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2012-Feb-02 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2012-Feb-02 01:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Feb-02 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:48:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 01:48:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.042 1.089 0.915 2012-Feb-02 01:48:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.947 0.993 1.040 2012-Feb-02 01:48:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 0.905 1.101 1.054 2012-Feb-02 01:48:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.020 1.093 0.020 2012-Feb-02 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2012-Feb-02 01:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2012-Feb-02 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2012-Feb-02 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2012-Feb-02 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2012-Feb-02 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.101 (still bad) 2012-Feb-02 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:49:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:49:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.044 1.092 0.919 2012-Feb-02 01:49:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.946 0.995 1.040 2012-Feb-02 01:49:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 0.899 1.103 1.053 2012-Feb-02 01:49:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.019 1.093 0.020 2012-Feb-02 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-02 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Feb-02 01:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-02 01:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Feb-02 01:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:50:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:50:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.043 1.088 0.916 2012-Feb-02 01:50:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.943 0.996 1.042 2012-Feb-02 01:50:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 0.894 1.099 1.050 2012-Feb-02 01:50:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.019 1.093 0.020 2012-Feb-02 01:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:51:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:51:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.044 1.087 0.915 2012-Feb-02 01:51:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.945 0.993 1.038 2012-Feb-02 01:51:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 0.896 1.098 1.049 2012-Feb-02 01:51:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.006 0.019 1.092 0.020 2012-Feb-02 01:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:52:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:52:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.039 1.088 0.916 2012-Feb-02 01:52:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.944 0.990 1.036 2012-Feb-02 01:52:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.896 1.097 1.050 2012-Feb-02 01:52:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.019 1.090 0.020 2012-Feb-02 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:53:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.041 1.094 0.920 2012-Feb-02 01:53:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.950 0.996 1.041 2012-Feb-02 01:53:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 0.902 1.101 1.052 2012-Feb-02 01:53:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.019 1.095 0.020 2012-Feb-02 01:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:54:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:54:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.044 1.090 0.918 2012-Feb-02 01:54:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.897 0.948 0.994 1.040 2012-Feb-02 01:54:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.894 1.098 1.052 2012-Feb-02 01:54:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.009 0.019 1.093 0.020 2012-Feb-02 01:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:55:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:55:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.042 1.085 0.917 2012-Feb-02 01:55:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.896 0.947 0.995 1.041 2012-Feb-02 01:55:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.896 1.099 1.053 2012-Feb-02 01:55:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.019 1.093 0.020 2012-Feb-02 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Feb-02 01:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.114 (still bad) 2012-Feb-02 01:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-02 01:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-02 01:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 01:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-02 01:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-02 01:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Feb-02 01:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Feb-02 01:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:56:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:56:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.043 1.088 0.914 2012-Feb-02 01:56:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.944 0.994 1.040 2012-Feb-02 01:56:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 0.902 1.097 1.051 2012-Feb-02 01:56:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.019 1.092 0.020 2012-Feb-02 01:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 01:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Feb-02 01:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:57:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:57:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.044 1.092 0.918 2012-Feb-02 01:57:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.895 0.946 0.994 1.040 2012-Feb-02 01:57:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.894 1.096 1.051 2012-Feb-02 01:57:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.019 1.093 0.020 2012-Feb-02 01:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.093 (still bad) 2012-Feb-02 01:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 01:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Feb-02 01:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:58:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.044 1.089 0.917 2012-Feb-02 01:58:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.944 0.992 1.040 2012-Feb-02 01:58:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 0.895 1.097 1.051 2012-Feb-02 01:58:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.019 1.092 0.020 2012-Feb-02 01:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.094 (still bad) 2012-Feb-02 01:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Feb-02 01:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 01:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Feb-02 01:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Feb-02 01:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Feb-02 01:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 01:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 01:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 01:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 01:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Feb-02 01:59:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 01:59:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 1.044 1.089 0.917 2012-Feb-02 01:59:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.945 0.991 1.040 2012-Feb-02 01:59:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.893 1.098 1.054 2012-Feb-02 01:59:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.007 0.019 1.093 0.021 2012-Feb-02 01:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 01:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2012-Feb-02 01:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 01:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 01:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.093 (still bad) 2012-Feb-02 01:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 01:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2012-Feb-02 01:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Feb-02 01:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.105 (still bad) 2012-Feb-02 01:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.096 (still bad) 2012-Feb-02 01:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.094 (still bad) 2012-Feb-02 01:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.100 (still bad) 2012-Feb-02 02:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.095 (still bad) 2012-Feb-02 02:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.097 (still bad) 2012-Feb-02 02:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Feb-02 02:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Feb-02 02:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 02:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.097 (still bad) 2012-Feb-02 02:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.095 (still bad) 2012-Feb-02 02:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.096 (still bad) 2012-Feb-02 02:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2012-Feb-02 02:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 02:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 02:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 02:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2012-Feb-02 02:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Feb-02 02:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-02 02:00:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-02 02:00:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 1.040 1.087 0.916 2012-Feb-02 02:00:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.893 0.943 0.992 1.038 2012-Feb-02 02:00:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 0.892 1.097 1.053 2012-Feb-02 02:00:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.022 1.092 0.022 2012-Feb-02 02:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2012-Feb-02 02:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 02:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2012-Feb-02 02:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Feb-02 02:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-02 02:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-02 02:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 02:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Feb-02 02:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 02:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 02:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2012-Feb-02 02:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.098 (still bad) 2012-Feb-02 02:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Feb-02 02:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.097 (still bad) 2012-Feb-02 02:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Feb-02 02:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Feb-02 02:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.104 (still bad) 2012-Feb-02 02:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2012-Feb-02 02:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2012-Feb-02 02:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2012-Feb-02 02:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.102 (still bad) 2012-Feb-02 02:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.101 (still bad) 2012-Feb-02 02:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.106 (still bad) 2012-Feb-02 02:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2012-Feb-02 02:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2012-Feb-02 02:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2012-Feb-02 02:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.093 (still bad) 2012-Feb-02 02:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2012-Feb-02 02:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2012-Feb-02 02:01:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 02:01:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.047 1.089 0.917 2012-Feb-02 02:01:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.894 0.944 0.992 1.038 2012-Feb-02 02:01:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 0.894 1.095 1.051 2012-Feb-02 02:01:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.005 0.021 1.091 0.022 2012-Feb-02 02:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2012-Feb-02 02:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Feb-02 02:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Feb-02 02:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2012-Feb-02 02:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2012-Feb-02 02:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2012-Feb-02 02:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2012-Feb-02 02:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Feb-02 02:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.094 (still bad) 2012-Feb-02 02:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.095 (still bad) 2012-Feb-02 02:01:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 02:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 02:01:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:01:57 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:01:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:01:57 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Feb-02 02:01:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:01:57 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Feb-02 02:01:57 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-02 02:01:57 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-02 02:01:57 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-02 02:01:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 02:01:57 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-02 02:01:57 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Feb-02 02:01:57 COMMAND run_command_line: EXECUTING command 44: 'ENDIF' 2012-Feb-02 02:01:57 COMMAND run_command_line: EXECUTING command 47: 'IF LSTSLEW(AGES1367_p1_054) < 103138 THEN' 2012-Feb-02 02:01:58 LOG3 is_if_valid: Current source data: up 620.1 17.2 UP - - 155 3.2 2012-Feb-02 02:01:58 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_054) < 103138 2012-Feb-02 02:01:58 INFO5 is_if_valid: Condition parsed as: 10.425161333333334 < 10.527222222222223 2012-Feb-02 02:01:58 COMMAND run_command_line: EXECUTING command 48: 'FIXEDDRIFT az=259.44 alfaangle=-64.7 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_054 ra=113400.00 dec=203030.00' 2012-Feb-02 02:01:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-02 02:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.102 (still bad) 2012-Feb-02 02:01:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 02:01:58 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 259.44 -64.7 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_054 113400.00 203030.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:01:58 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-02 02:01:58 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-02 02:01:58 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGESLEO_p1_049' 2012-Feb-02 02:01:58 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-02 02:01:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_054} 2012-Feb-02 02:01:58 INFO3 fixed_driftmap: Sending telescope to Az = 259.44 and ZA = 15.00 2012-Feb-02 02:01:58 LOG3 track_source: Calling 'track_source AGES1367_p1_054 259.44 14.9978022042 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:01:58 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:01:58 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-02 02:01:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_054} INFO {Slewing to source 'AGES1367_p1_054' ...} 2012-Feb-02 02:01:58 INFO1 track_source: Starting to track AGES1367_p1_054 2012-Feb-02 02:01:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_054" 2012-Feb-02 02:01:59 LOG3 vw_send: To DATATAKING: set ra 259.44 2012-Feb-02 02:01:59 LOG3 vw_send: To DATATAKING: set dec 14.9978022042 2012-Feb-02 02:01:59 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:01:59 LOG3 vw_send: To DATATAKING: pnt tr 259.44 14.9978022042 -CF 2012-Feb-02 02:01:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:01:59 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:01:59 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-02 02:01:59 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:01:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:01:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:01:59 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Feb-02 02:01:59 START begin_task: Starting task 'rotate ALFA to -64.7 degrees' 2012-Feb-02 02:01:59 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-02 02:01:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -64.7 degrees ...} 2012-Feb-02 02:01:59 INFO2 rotate_alfa: ALFA commanded to -64.7 degrees 2012-Feb-02 02:01:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION -64.7 REPLY 2012-Feb-02 02:01:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-02 02:01:59 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-02 02:01:59 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_054" 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: set ra 259.44 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: set dec 14.9978022042 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: vw% 259.44 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: vw% 14.9978022042 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: pnt tr 259.44 14.9978022042 -CF 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 02:01:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:03:16 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-02 02:03:16 INFO3 alfa_motor: ALFA rotator in-position -64.70 degrees 2012-Feb-02 02:03:16 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-02 02:03:16 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Feb-02 02:03:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:03:16 STOP finish_task: Finishing task 'rotate ALFA to -64.7 degrees' 2012-Feb-02 02:03:16 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-02 02:03:16 INFO2 finish_task: DONE finished configuration: rotating ALFA to -64.7 degrees 2012-Feb-02 02:03:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:03:16 STOP end_task: Finishing task 'rotate ALFA to -64.7 degrees' with status 'OK' 2012-Feb-02 02:03:16 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Feb-02 02:03:16 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 02:03:16 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-02 02:03:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 02:03:16 LOG3 waittrk: Start waittrk 5 2012-Feb-02 02:03:16 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 02:03:16 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-02 02:03:21 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 02:03:21 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Feb-02 02:03:21 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 02:03:21 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Feb-02 02:04:25 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 02:04:25 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Feb-02 02:04:25 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:04:25 INFO2 waittrk: Now tracking AGES1367_p1_054 2012-Feb-02 02:04:25 LOG4 waittrk: Current telescope position: Az = 619.02 ZA = 15.00 2012-Feb-02 02:04:25 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 02:04:25 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-02 02:04:25 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 02:04:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:04:25 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 02:04:25 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Feb-02 02:04:25 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 02:04:25 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Feb-02 02:04:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 02:04:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 02:04:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:04:25 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 02:04:25 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2012-Feb-02 02:04:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 02:04:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:04:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:04:26 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:04:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 02:04:26 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2012-Feb-02 02:04:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 02:04:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:04:26 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 02:04:26 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:04:26 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Feb-02 02:04:26 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:04:26 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:04:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:04:26 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Feb-02 02:04:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:04:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 02:04:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:04:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:04:26 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:04:26 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Feb-02 02:04:26 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:04:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:04:26 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Feb-02 02:04:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:04:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:04:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 02:04:26 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Feb-02 02:04:26 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-02 02:04:26 INFO2 astwait: Waiting for 349 seconds from 06:04:26 to 06:10:15 UTC ... 2012-Feb-02 02:04:26 LOG4 send_obs_status: To obs_status: <1> TASKTIME 349 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 02:04:26 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-02 02:04:26 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-02 02:10:15 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 INFO3 astwait: Finished waiting 2012-Feb-02 02:10:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:10:15 LOG5 dopset_later: Calling 'dopset_later 61.158527127256285' 2012-Feb-02 02:10:15 INFO3 dopset_later: Setting Doppler correction for 02:11:15 (61.2 seconds from now) 2012-Feb-02 02:10:15 LOG5 antvel: Calling 'antvel 259.440000 14.997802 F Heliocentric 61.158527127256285' 2012-Feb-02 02:10:15 LOG2 antvel: Transforming current Az = 259.44 ZA = 15.00 to apparent RA = 11:34:39.8 Dec = +20:26:11.8 2012-Feb-02 02:10:15 LOG2 antvel: Parameters to Doppler: Heliocentric 22275 2012 33 0.0 2012-Feb-02 02:10:15 INFO5 antvel: Computed antenna velocity: -16.15195 km/s 2012-Feb-02 02:10:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-16.151952050999999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-02 02:10:15 INFO4 dopset_gen: New sky frequencies: 1381.317850 1381.317850 1381.317850 1381.317850 1381.317850 1381.317850 1381.317850 1381.317850 1381.317850 2012-Feb-02 02:10:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.317850 sky0=1381.317850 sky1=1381.317850 sky2=1381.317850 sky3=1381.317850 sky4=1381.317850 sky5=1381.317850 sky6=1381.317850 sky7=1381.317850 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 02:10:15 LOG2 dopset_gen: Result from 'sky2syn': 1631.317850 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631317850.0} 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 02:10:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-02 02:10:15 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-02 02:10:15 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.7 Dec = +20:30:12.5 2012-Feb-02 02:10:15 LOG3 track_source: Calling 'track_source AGES1367_p1_054 113303.7 203012.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:10:15 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:10:15 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_054} INFO {Slewing to source 'AGES1367_p1_054' ...} 2012-Feb-02 02:10:15 INFO1 track_source: Starting to track AGES1367_p1_054 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_054" 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: set ra 113303.7 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: set dec 203012.5 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: pnt tr 113303.7 203012.5 -CJ 2012-Feb-02 02:10:15 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:10:15 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:10:15 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:10:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:15 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:10:15 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 02:10:15 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 02:10:15 LOG3 waittrk: Start waittrk 5 2012-Feb-02 02:10:15 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 02:10:15 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631317850.0} 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_054" 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: set ra 113303.7 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: set dec 203012.5 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.7 203012.5 -CJ 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: 113303.7 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: vw% 203012.5 2012-Feb-02 02:10:15 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Feb-02 02:10:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 02:10:20 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Feb-02 02:10:20 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 02:10:20 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Feb-02 02:10:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 02:10:22 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Feb-02 02:10:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:10:22 INFO2 waittrk: Now tracking AGES1367_p1_054 2012-Feb-02 02:10:22 LOG4 waittrk: Current telescope position: Az = 619.03 ZA = 14.99 2012-Feb-02 02:10:22 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 02:10:22 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-02 02:10:22 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 02:10:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 02:10:22 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Feb-02 02:10:22 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-02 02:10:22 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-02 02:10:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-02 02:10:22 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-02 02:10:22 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-02 02:10:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-02 02:10:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:10:22 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-02 02:10:22 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Feb-02 02:10:22 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-02 02:10:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:10:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:25 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:10:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-02 02:10:25 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Feb-02 02:10:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-02 02:10:25 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 02:10:25 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-02 02:10:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 02:10:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:10:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:10:25 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:10:25 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:10:25 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-02 02:10:25 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Feb-02 02:10:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-02 02:10:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Feb-02 02:10:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2012-Feb-02 02:10:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Feb-02 02:10:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2012-Feb-02 02:10:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-02 02:10:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-02 02:10:26 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Feb-02 02:10:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.077 1.068 ALFA beam 1: 0.901 0.916 2012-Feb-02 02:10:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.915 0.928 ALFA beam 3: 1.010 1.089 2012-Feb-02 02:10:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.788 0.946 ALFA beam 5: 0.966 1.119 2012-Feb-02 02:10:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.906 0.014 ALFA beam 7: 0.986 0.014 2012-Feb-02 02:10:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 02:10:26 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-02 02:10:26 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-02 02:10:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 02:10:26 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Feb-02 02:10:26 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-02 02:10:26 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-02 02:10:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 02:10:26 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-02 02:10:26 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-02 02:10:26 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-02 02:10:26 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Feb-02 02:10:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-02 02:10:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.068 0.901 0.916 2012-Feb-02 02:10:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.928 1.010 1.089 2012-Feb-02 02:10:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.946 0.966 1.119 2012-Feb-02 02:10:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.014 0.986 0.014 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.4 B 30.0 30.1 mn:A 0.1 -0.1 B -0.1 -0.2 gn: 11 11 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.4 30.0 B 28.1 29.8 mn:A 0.1 -0.6 B -0.8 0.0 gn: 12 11 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.6 28.6 B 32.9 28.5 mn:A 0.2 0.5 B 0.2 -0.0 gn: 7 11 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.0 27.7 B 31.3 31.3 mn:A -0.4 -0.3 B 0.5 0.4 gn: 8 10 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.6 27.8 B 30.8 32.2 mn:A 0.1 -0.2 B 0.5 0.1 gn: 10 12 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.5 29.8 B 31.9 29.6 mn:A 0.2 -0.3 B -0.1 0.2 gn: 11 12 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.9 31.6 B 30.6 27.4 mn:A 0.4 -0.2 B 0.1 -0.2 gn: 13 12 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.8 29.1 B 29.3 30.5 mn:A -0.2 0.4 B 0.2 0.1 gn: 12 12 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.5 28.6 B 29.5 29.6 mn:A -0.4 -0.3 B -0.4 0.0 gn: 13 11 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.6 28.6 B 31.9 30.7 mn:A 0.1 0.1 B -0.4 0.1 gn: 16 13 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.6 28.5 B 30.9 30.9 mn:A 0.8 0.4 B -0.0 0.6 gn: 12 11 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.8 29.5 B 31.2 31.0 mn:A -0.2 0.2 B -0.1 0.1 gn: 12 11 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b6s0g0 rms:A 33.0 30.2 B 14.1 14.5 mn:A -0.5 0.3 B 0.5 -0.4 gn: 13 31 2012-Feb-02 02:10:32 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.0 27.2 B 11.1 10.8 mn:A 0.8 0.5 B 0.1 0.3 gn: 13 31 2012-Feb-02 02:10:32 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-02 02:10:32 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Feb-02 02:10:32 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-02 02:10:32 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-02 02:10:32 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-02 02:10:32 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-02 02:10:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:32 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-02 02:10:32 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Feb-02 02:10:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 02:10:32 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-02 02:10:32 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-02 02:10:32 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-02 02:10:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:32 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-02 02:10:32 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Feb-02 02:10:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:10:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:10:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:10:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:10:33 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-02 02:10:33 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-02 02:10:33 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 02:10:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 02:10:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:10:33 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 02:10:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 02:10:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:10:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:33 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:10:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 02:10:33 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 02:10:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:10:33 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 02:10:33 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:33 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:10:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:10:33 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:10:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 02:10:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:10:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:10:33 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:10:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:10:33 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:10:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:10:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 02:10:33 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-02 02:10:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 02:10:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 02:10:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 02:10:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20120202.a2048.0002.fits 2012-Feb-02 02:10:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 02:10:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120202.a2048.0002.fits} 2012-Feb-02 02:10:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 02:10:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 02:10:33 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-02 02:10:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:10:33 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Feb-02 02:10:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-02 02:10:33 LOG5 log_alfabeam: Parameters: 11.551027777777778 20.503472222222221 10.515833 2012.0905972887672 -64.700043 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 0 11.551027777777778 20.503472222222229 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 1 11.552232328007843 20.413508804750197 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 2 11.558117806871987 20.473292284404291 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 3 11.556890974814420 20.563727167902776 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 4 11.549784002270281 20.593279317283049 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 5 11.543931177820154 20.533087196102446 2012-Feb-02 02:10:33 LOG4 log_alfabeam: ALFABEAM 6 11.545152656983879 20.443750942187123 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_054 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: patternid=203300067 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: scanid=203300068 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317850.0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317850.0 2012-Feb-02 02:10:34 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:10:34 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:10:34 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_054:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203300067:scanid=203300068:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317850.0:topobfreqhz=1306317850.0:filetype=1 2012-Feb-02 02:10:34 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:10:34 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Feb-02 02:10:34 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:10:34 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:10:34 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Feb-02 02:10:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:10:34 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:10:34 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 02:10:34 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:10:34 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Feb-02 02:10:34 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:10:34 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:10:34 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Feb-02 02:10:34 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:10:34 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300068 2012-Feb-02 02:10:34 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:10:34 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Feb-02 02:10:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:10:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22235.00 2012-Feb-02 02:10:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-02 02:10:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:10:34 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:10:36 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:10:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 02:10:36 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:36 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:39 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:10:39.01 2012-Feb-02 02:10:39 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328163039.01 Thu Feb 2 02:10:39 2012 2012-Feb-02 02:10:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317850 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:10:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:10:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.486 (still bad) 2012-Feb-02 02:10:45 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:10:45 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:10:45 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:10:45 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:10:45 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 02:10:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 02:10:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 02:10:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 02:10:45 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 02:10:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 02:10:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 02:10:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 02:10:45 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-02 02:10:45 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:10:45 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-02 02:10:45 LOG5 log_alfabeam: Parameters: 11.551027777777778 20.503472222222221 10.518897 2012.0905976373363 -64.700043 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 0 11.551027777777778 20.503472222222214 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 1 11.552235750138731 20.413517789282608 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 2 11.558118968844060 20.473345693198937 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 3 11.556888617093875 20.563772815758735 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 4 11.549780468321448 20.593269566969184 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 5 11.543930028367896 20.533032229832536 2012-Feb-02 02:10:45 LOG4 log_alfabeam: ALFABEAM 6 11.545154944099115 20.443706944864850 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_054 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: patternid=203300067 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: scanid=203300069 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317850.0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317850.0 2012-Feb-02 02:10:45 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:10:45 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:10:45 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_054:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203300067:scanid=203300069:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317850.0:topobfreqhz=1306317850.0:filetype=1 2012-Feb-02 02:10:45 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:10:45 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:10:45 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:10:45 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:10:45 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:10:45 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 02:10:45 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:10:45 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:10:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:10:45 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:10:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300069 2012-Feb-02 02:10:45 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:10:45 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Feb-02 02:10:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:10:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22246.00 2012-Feb-02 02:10:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-02 02:10:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:10:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.486 (still bad) 2012-Feb-02 02:10:48 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:10:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 02:10:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:10:51 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:10:51.01 2012-Feb-02 02:10:51 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328163051.01 Thu Feb 2 02:10:51 2012 2012-Feb-02 02:10:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317850 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:10:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:10:51 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-02 02:10:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:10:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:10:57 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:10:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:10:57 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:10:57 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 02:10:57 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-02 02:10:57 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-02 02:10:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:57 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-02 02:10:57 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-02 02:10:57 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 259.44 and ZA = 15.00 2012-Feb-02 02:10:57 LOG3 track_source: Calling 'track_source AGES1367_p1_054 259.44 14.9978022042 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:10:57 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:10:57 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_054} INFO {Slewing to source 'AGES1367_p1_054' ...} 2012-Feb-02 02:10:57 INFO1 track_source: Starting to track AGES1367_p1_054 2012-Feb-02 02:10:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_054" 2012-Feb-02 02:10:57 LOG3 vw_send: To DATATAKING: set ra 259.44 2012-Feb-02 02:10:57 LOG3 vw_send: To DATATAKING: set dec 14.9978022042 2012-Feb-02 02:10:57 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:10:57 LOG3 vw_send: To DATATAKING: pnt tr 259.44 14.9978022042 -CF 2012-Feb-02 02:10:57 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:10:57 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:10:57 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:10:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:10:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:10:57 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 LOG1 fixed_driftmap: Parameters: HA = -01:03:00.7 Start = 10:31:39.3 LST = 10:31:20.1 diff = 19.2 secs 2012-Feb-02 02:10:57 INFO2 fixed_driftmap: Waiting 17.2 seconds for RA 11:34:40 2012-Feb-02 02:10:57 INFO2 lstwait: Waiting for 17.2 secs from LST 10:31:20 to LST 10:31:37 ... 2012-Feb-02 02:10:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 17.166172716372838 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 02:10:57 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-02 02:10:57 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_054" 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: set ra 259.44 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: set dec 14.9978022042 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: vw% 259.44 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: vw% 14.9978022042 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: pnt tr 259.44 14.9978022042 -CF 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 02:10:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:11:14 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-02 02:11:14 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Feb-02 02:11:14 LOG4 lstwait: Finished waiting 0.84 seconds late 2012-Feb-02 02:11:14 INFO3 lstwait: Finished waiting 2012-Feb-02 02:11:14 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:11:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-02 02:11:14 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-02 02:11:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-02 02:11:14 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-02 02:11:14 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:11:14 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Feb-02 02:11:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-02 02:11:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_054 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: patternid=203300070 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: scanid=203300070 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317850.0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317850.0 2012-Feb-02 02:11:14 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:11:14 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:11:14 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_054:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203300070:scanid=203300070:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317850.0:topobfreqhz=1306317850.0:filetype=1 2012-Feb-02 02:11:14 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:11:14 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Feb-02 02:11:14 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:11:14 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:11:14 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Feb-02 02:11:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:11:14 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:11:14 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-02 02:11:14 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:11:14 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Feb-02 02:11:14 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:11:14 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:11:14 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Feb-02 02:11:14 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:11:14 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203300070 2012-Feb-02 02:11:15 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:11:15 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Feb-02 02:11:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:11:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:11:15 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:11:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-02 02:11:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22276.00 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317850 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:11:17 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:11:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-02 02:11:17 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317850 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:11:20 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:11:20.01 2012-Feb-02 02:11:20 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328163080.01 Thu Feb 2 02:11:20 2012 2012-Feb-02 02:11:20 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:11:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:11:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.068 0.904 0.920 2012-Feb-02 02:11:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.940 1.018 1.094 2012-Feb-02 02:11:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.790 0.948 0.967 1.121 2012-Feb-02 02:11:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.024 0.984 0.024 2012-Feb-02 02:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:12:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.076 0.912 0.925 2012-Feb-02 02:12:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.943 1.023 1.097 2012-Feb-02 02:12:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 0.949 0.966 1.120 2012-Feb-02 02:12:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.025 0.989 0.025 2012-Feb-02 02:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-02 02:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:13:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:13:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.069 0.907 0.919 2012-Feb-02 02:13:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.943 1.023 1.100 2012-Feb-02 02:13:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.791 0.951 0.967 1.119 2012-Feb-02 02:13:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.024 0.980 0.025 2012-Feb-02 02:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-02 02:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 02:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-02 02:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:14:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:14:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.061 0.905 0.916 2012-Feb-02 02:14:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.935 1.011 1.089 2012-Feb-02 02:14:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.944 0.965 1.119 2012-Feb-02 02:14:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.024 0.978 0.024 2012-Feb-02 02:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-02 02:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-02 02:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 02:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-02 02:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:15:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:15:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.070 0.907 0.918 2012-Feb-02 02:15:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.935 1.020 1.100 2012-Feb-02 02:15:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.789 0.948 0.967 1.118 2012-Feb-02 02:15:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.024 0.982 0.025 2012-Feb-02 02:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-02 02:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Feb-02 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Feb-02 02:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-02 02:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-02 02:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:16:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:16:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.069 0.907 0.919 2012-Feb-02 02:16:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.934 1.014 1.091 2012-Feb-02 02:16:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.943 0.962 1.119 2012-Feb-02 02:16:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.024 0.986 0.024 2012-Feb-02 02:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:17:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:17:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.070 0.907 0.918 2012-Feb-02 02:17:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.936 1.013 1.092 2012-Feb-02 02:17:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.943 0.967 1.120 2012-Feb-02 02:17:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.025 0.981 0.025 2012-Feb-02 02:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Feb-02 02:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 02:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 02:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 02:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-02 02:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2012-Feb-02 02:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2012-Feb-02 02:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2012-Feb-02 02:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2012-Feb-02 02:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2012-Feb-02 02:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Feb-02 02:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:18:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:18:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.069 0.906 0.916 2012-Feb-02 02:18:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.932 1.014 1.091 2012-Feb-02 02:18:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.941 0.967 1.117 2012-Feb-02 02:18:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.025 0.978 0.025 2012-Feb-02 02:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:19:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:19:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.064 0.904 0.916 2012-Feb-02 02:19:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.934 1.012 1.090 2012-Feb-02 02:19:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 0.942 0.964 1.118 2012-Feb-02 02:19:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.025 0.978 0.025 2012-Feb-02 02:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-02 02:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 02:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 02:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:20:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:20:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.061 0.909 0.917 2012-Feb-02 02:20:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.936 1.013 1.091 2012-Feb-02 02:20:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.944 0.965 1.117 2012-Feb-02 02:20:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.025 0.981 0.025 2012-Feb-02 02:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Feb-02 02:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-02 02:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Feb-02 02:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Feb-02 02:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Feb-02 02:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:21:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.069 0.910 0.919 2012-Feb-02 02:21:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.934 1.015 1.092 2012-Feb-02 02:21:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.946 0.966 1.117 2012-Feb-02 02:21:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.025 0.980 0.025 2012-Feb-02 02:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:22:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:22:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.067 0.909 0.919 2012-Feb-02 02:22:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.935 1.014 1.091 2012-Feb-02 02:22:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.946 0.971 1.120 2012-Feb-02 02:22:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.025 0.985 0.025 2012-Feb-02 02:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2012-Feb-02 02:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Feb-02 02:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Feb-02 02:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-02 02:23:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Feb-02 02:23:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.070 0.909 0.919 2012-Feb-02 02:23:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.934 1.012 1.092 2012-Feb-02 02:23:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.946 0.967 1.118 2012-Feb-02 02:23:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.903 0.025 0.983 0.025 2012-Feb-02 02:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Feb-02 02:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2012-Feb-02 02:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.129 (still bad) 2012-Feb-02 02:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Feb-02 02:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Feb-02 02:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Feb-02 02:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Feb-02 02:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-02 02:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:24:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:24:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.066 0.907 0.917 2012-Feb-02 02:24:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.935 1.014 1.090 2012-Feb-02 02:24:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.787 0.944 0.965 1.117 2012-Feb-02 02:24:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.024 0.981 0.024 2012-Feb-02 02:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-02 02:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-02 02:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:25:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.067 0.909 0.918 2012-Feb-02 02:25:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.938 1.016 1.094 2012-Feb-02 02:25:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.945 0.969 1.120 2012-Feb-02 02:25:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.024 0.984 0.024 2012-Feb-02 02:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-02 02:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2012-Feb-02 02:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 02:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 02:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 02:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 02:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 02:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2012-Feb-02 02:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Feb-02 02:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2012-Feb-02 02:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Feb-02 02:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Feb-02 02:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2012-Feb-02 02:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-02 02:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-02 02:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Feb-02 02:26:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:26:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.078 0.909 0.917 2012-Feb-02 02:26:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.939 1.018 1.095 2012-Feb-02 02:26:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.946 0.969 1.119 2012-Feb-02 02:26:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.905 0.024 0.984 0.024 2012-Feb-02 02:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-02 02:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Feb-02 02:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-02 02:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:27:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:27:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.069 0.911 0.919 2012-Feb-02 02:27:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.938 1.016 1.093 2012-Feb-02 02:27:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.788 0.945 0.973 1.126 2012-Feb-02 02:27:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.024 0.985 0.024 2012-Feb-02 02:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-02 02:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.135 (still bad) 2012-Feb-02 02:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Feb-02 02:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-02 02:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-02 02:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.131 (still bad) 2012-Feb-02 02:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Feb-02 02:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Feb-02 02:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Feb-02 02:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Feb-02 02:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Feb-02 02:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:28:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:28:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.066 0.909 0.918 2012-Feb-02 02:28:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.934 1.014 1.091 2012-Feb-02 02:28:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.944 0.964 1.119 2012-Feb-02 02:28:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.024 0.982 0.025 2012-Feb-02 02:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Feb-02 02:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:29:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:29:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.069 0.907 0.919 2012-Feb-02 02:29:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.932 1.017 1.094 2012-Feb-02 02:29:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.945 0.965 1.119 2012-Feb-02 02:29:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.024 0.982 0.024 2012-Feb-02 02:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-02 02:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-02 02:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Feb-02 02:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.130 (still bad) 2012-Feb-02 02:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2012-Feb-02 02:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Feb-02 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2012-Feb-02 02:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2012-Feb-02 02:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.122 (still bad) 2012-Feb-02 02:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.130 (still bad) 2012-Feb-02 02:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:30:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Feb-02 02:30:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.072 0.905 0.918 2012-Feb-02 02:30:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.936 1.013 1.092 2012-Feb-02 02:30:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.786 0.943 0.965 1.119 2012-Feb-02 02:30:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.024 0.979 0.024 2012-Feb-02 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Feb-02 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Feb-02 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Feb-02 02:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Feb-02 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Feb-02 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Feb-02 02:31:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:31:21 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:31:21 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:31:21 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:31:21 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Feb-02 02:31:21 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:31:21 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Feb-02 02:31:21 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-02 02:31:21 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-02 02:31:21 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-02 02:31:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 02:31:21 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-02 02:31:21 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Feb-02 02:31:21 COMMAND run_command_line: EXECUTING command 51: 'ENDIF' 2012-Feb-02 02:31:21 COMMAND run_command_line: EXECUTING command 54: 'IF LSTSLEW(AGES1367_p1_056) < 105508 THEN' 2012-Feb-02 02:31:22 LOG3 is_if_valid: Current source data: up 616.9 10.3 UP - - 126 2.0 2012-Feb-02 02:31:22 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_056) < 105508 2012-Feb-02 02:31:22 INFO5 is_if_valid: Condition parsed as: 10.896503333333333 < 10.918888888888889 2012-Feb-02 02:31:22 COMMAND run_command_line: EXECUTING command 55: 'FIXEDDRIFT az=256.08 alfaangle=-58.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_056 ra=113400.00 dec=202730.00' 2012-Feb-02 02:31:22 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-02 02:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Feb-02 02:31:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 02:31:22 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 256.08 -58.5 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_056 113400.00 202730.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:31:22 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-02 02:31:22 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-02 02:31:22 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p1_054' 2012-Feb-02 02:31:23 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-02 02:31:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_056} 2012-Feb-02 02:31:23 INFO3 fixed_driftmap: Sending telescope to Az = 256.08 and ZA = 9.53 2012-Feb-02 02:31:23 LOG3 track_source: Calling 'track_source AGES1367_p1_056 256.08 9.5338531183 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:31:23 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:31:23 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-02 02:31:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_056} INFO {Slewing to source 'AGES1367_p1_056' ...} 2012-Feb-02 02:31:23 INFO1 track_source: Starting to track AGES1367_p1_056 2012-Feb-02 02:31:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_056" 2012-Feb-02 02:31:23 LOG3 vw_send: To DATATAKING: set ra 256.08 2012-Feb-02 02:31:23 LOG3 vw_send: To DATATAKING: set dec 9.5338531183 2012-Feb-02 02:31:23 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:31:23 LOG3 vw_send: To DATATAKING: pnt tr 256.08 9.5338531183 -CF 2012-Feb-02 02:31:23 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:31:23 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:31:23 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-02 02:31:23 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:31:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:31:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:31:23 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Feb-02 02:31:23 START begin_task: Starting task 'rotate ALFA to -58.5 degrees' 2012-Feb-02 02:31:23 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-02 02:31:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -58.5 degrees ...} 2012-Feb-02 02:31:23 INFO2 rotate_alfa: ALFA commanded to -58.5 degrees 2012-Feb-02 02:31:23 LOG3 sock_errsend: To ALFAMOTOR: POSITION -58.5 REPLY 2012-Feb-02 02:31:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-02 02:31:23 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-02 02:31:23 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_056" 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: set ra 256.08 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: set dec 9.5338531183 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: vw% 256.08 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: vw% 9.5338531183 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: pnt tr 256.08 9.5338531183 -CF 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 02:31:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:31:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-02 02:31:28 INFO3 alfa_motor: ALFA rotator in-position -58.50 degrees 2012-Feb-02 02:31:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-02 02:31:28 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Feb-02 02:31:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:31:28 STOP finish_task: Finishing task 'rotate ALFA to -58.5 degrees' 2012-Feb-02 02:31:28 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-02 02:31:28 INFO2 finish_task: DONE finished configuration: rotating ALFA to -58.5 degrees 2012-Feb-02 02:31:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:31:28 STOP end_task: Finishing task 'rotate ALFA to -58.5 degrees' with status 'OK' 2012-Feb-02 02:31:28 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Feb-02 02:31:28 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 02:31:28 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-02 02:31:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 02:31:28 LOG3 waittrk: Start waittrk 5 2012-Feb-02 02:31:28 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 02:31:28 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Feb-02 02:31:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 02:31:33 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Feb-02 02:31:33 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 02:31:33 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Feb-02 02:33:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 02:33:45 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Feb-02 02:33:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:33:45 INFO2 waittrk: Now tracking AGES1367_p1_056 2012-Feb-02 02:33:45 LOG4 waittrk: Current telescope position: Az = 615.59 ZA = 9.53 2012-Feb-02 02:33:45 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 02:33:45 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-02 02:33:45 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 02:33:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:33:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 02:33:45 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Feb-02 02:33:45 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 02:33:45 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Feb-02 02:33:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 02:33:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 02:33:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:33:45 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 02:33:45 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Feb-02 02:33:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 02:33:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:33:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:46 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:33:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 02:33:46 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 02:33:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:33:46 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 02:33:46 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:33:46 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:46 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:33:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:33:46 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:33:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 02:33:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:33:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:33:46 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:33:46 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:33:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:33:46 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:33:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:33:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 02:33:46 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG5 dopset_later: Calling 'dopset_later 55.832891454657592' 2012-Feb-02 02:33:46 INFO3 dopset_later: Setting Doppler correction for 02:34:42 (55.8 seconds from now) 2012-Feb-02 02:33:46 LOG5 antvel: Calling 'antvel 256.080000 9.533853 F Heliocentric 55.832891454657592' 2012-Feb-02 02:33:46 LOG2 antvel: Transforming current Az = 256.08 ZA = 9.53 to apparent RA = 11:34:39.8 Dec = +20:23:11.8 2012-Feb-02 02:33:46 LOG2 antvel: Parameters to Doppler: Heliocentric 23682 2012 33 0.0 2012-Feb-02 02:33:46 INFO5 antvel: Computed antenna velocity: -16.11644 km/s 2012-Feb-02 02:33:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-16.116441546899999 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-02 02:33:46 INFO4 dopset_gen: New sky frequencies: 1381.317686 1381.317686 1381.317686 1381.317686 1381.317686 1381.317686 1381.317686 1381.317686 1381.317686 2012-Feb-02 02:33:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.317686 sky0=1381.317686 sky1=1381.317686 sky2=1381.317686 sky3=1381.317686 sky4=1381.317686 sky5=1381.317686 sky6=1381.317686 sky7=1381.317686 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 02:33:46 LOG2 dopset_gen: Result from 'sky2syn': 1631.317686 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 02:33:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631317686.0} 2012-Feb-02 02:33:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 02:33:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-02 02:33:46 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-02 02:33:46 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:09.1 Dec = +20:27:12.5 2012-Feb-02 02:33:46 LOG3 track_source: Calling 'track_source AGES1367_p1_056 113309.1 202712.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:33:46 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:33:46 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-02 02:33:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_056} INFO {Slewing to source 'AGES1367_p1_056' ...} 2012-Feb-02 02:33:46 INFO1 track_source: Starting to track AGES1367_p1_056 2012-Feb-02 02:33:46 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_056" 2012-Feb-02 02:33:46 LOG3 vw_send: To DATATAKING: set ra 113309.1 2012-Feb-02 02:33:47 LOG3 vw_send: To DATATAKING: set dec 202712.5 2012-Feb-02 02:33:47 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:33:47 LOG3 vw_send: To DATATAKING: pnt tr 113309.1 202712.5 -CJ 2012-Feb-02 02:33:47 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:33:47 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:33:47 LOG5 finish_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-02 02:33:47 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:33:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:33:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:33:47 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Feb-02 02:33:47 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 02:33:47 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-02 02:33:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 02:33:47 LOG3 waittrk: Start waittrk 5 2012-Feb-02 02:33:47 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 02:33:47 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631317686.0} 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_056" 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: set ra 113309.1 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: set dec 202712.5 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: pnt tr 113309.1 202712.5 -CJ 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: 113309.1 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: vw% 202712.5 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:33:47 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:52 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 02:33:52 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2012-Feb-02 02:33:52 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 02:33:52 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Feb-02 02:33:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 02:33:54 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Feb-02 02:33:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:33:54 INFO2 waittrk: Now tracking AGES1367_p1_056 2012-Feb-02 02:33:54 LOG4 waittrk: Current telescope position: Az = 615.60 ZA = 9.51 2012-Feb-02 02:33:54 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 02:33:54 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-02 02:33:54 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 02:33:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:33:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 02:33:54 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Feb-02 02:33:54 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-02 02:33:54 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-02 02:33:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-02 02:33:54 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-02 02:33:54 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-02 02:33:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-02 02:33:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:33:54 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-02 02:33:54 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-02 02:33:54 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-02 02:33:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:33:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:56 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:33:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-02 02:33:56 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-02 02:33:56 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 02:33:56 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 02:33:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:33:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:33:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:33:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:33:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-02 02:33:56 LOG5 begin_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:33:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-02 02:33:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-02 02:33:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 3 dB --- beam 5: 3 3 dB 2012-Feb-02 02:33:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Feb-02 02:33:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2012-Feb-02 02:33:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-02 02:33:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-02 02:33:56 LOG5 end_task: Level: (5) ID = <10210> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.054 1.044 ALFA beam 1: 1.124 0.894 2012-Feb-02 02:33:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.098 0.901 ALFA beam 3: 0.977 1.049 2012-Feb-02 02:33:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.772 0.903 ALFA beam 5: 0.923 1.081 2012-Feb-02 02:33:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.896 0.014 ALFA beam 7: 0.974 0.014 2012-Feb-02 02:33:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 02:33:56 LOG5 finish_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-02 02:33:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:33:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 02:33:56 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-02 02:33:56 LOG5 begin_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-02 02:33:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 02:33:56 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-02 02:33:56 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-02 02:33:56 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-02 02:33:56 LOG5 begin_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-02 02:33:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-02 02:33:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.044 1.124 0.894 2012-Feb-02 02:33:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.901 0.977 1.049 2012-Feb-02 02:33:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.903 0.923 1.081 2012-Feb-02 02:33:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.896 0.014 0.974 0.014 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.8 27.1 B 29.7 29.8 mn:A 0.2 0.0 B -0.1 -0.3 gn: 11 11 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.3 29.9 B 27.8 29.4 mn:A 0.1 -0.5 B -0.7 0.1 gn: 12 11 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.1 28.2 B 32.4 28.2 mn:A 0.2 0.6 B 0.1 0.1 gn: 7 11 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.6 27.3 B 31.0 31.0 mn:A -0.5 -0.4 B 0.5 0.4 gn: 8 10 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.6 30.7 B 30.2 31.6 mn:A 0.0 -0.2 B 0.4 0.0 gn: 11 12 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.1 29.3 B 31.3 29.1 mn:A 0.3 -0.2 B -0.0 0.2 gn: 11 12 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 31.0 B 30.1 26.8 mn:A 0.3 -0.3 B 0.0 -0.3 gn: 13 12 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.5 28.8 B 28.8 30.0 mn:A -0.2 0.3 B 0.3 0.3 gn: 12 12 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.2 28.3 B 28.8 28.9 mn:A -0.4 -0.3 B -0.5 0.0 gn: 13 11 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.5 28.5 B 31.1 29.9 mn:A 0.1 0.1 B -0.3 0.2 gn: 16 13 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b5s0g0 rms:A 28.9 27.9 B 30.2 30.2 mn:A 0.8 0.4 B 0.0 0.6 gn: 12 11 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.9 29.6 B 30.6 30.4 mn:A -0.2 0.3 B -0.1 0.2 gn: 12 11 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.7 30.0 B 14.1 14.5 mn:A -0.4 0.2 B 0.5 -0.2 gn: 13 31 2012-Feb-02 02:34:03 INFO3 from_mock: From MOCK: b6s1g0 rms:A 29.9 27.1 B 11.1 10.8 mn:A 0.7 0.5 B 0.1 0.2 gn: 13 31 2012-Feb-02 02:34:03 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-02 02:34:03 LOG5 end_task: Level: (5) ID = <10212> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-02 02:34:03 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-02 02:34:03 LOG5 finish_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-02 02:34:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:34:03 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-02 02:34:03 LOG5 end_task: Level: (4) ID = <10211> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 02:34:03 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-02 02:34:03 LOG5 finish_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-02 02:34:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:34:03 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-02 02:34:03 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:34:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:34:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:34:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:34:03 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-02 02:34:03 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-02 02:34:03 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-02 02:34:03 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 02:34:03 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 02:34:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 02:34:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:34:03 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 02:34:03 LOG5 begin_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2012-Feb-02 02:34:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 02:34:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 02:34:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:34:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:34:04 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:34:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 02:34:04 LOG5 end_task: Level: (5) ID = <10215> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 02:34:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:34:04 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 02:34:04 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:34:04 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:34:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20120202.a2048.0003.fits 2012-Feb-02 02:34:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120202.a2048.0003.fits} 2012-Feb-02 02:34:04 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:34:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:34:04 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:34:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 02:34:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:34:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:34:04 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:34:04 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:34:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:34:04 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:34:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:34:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 02:34:04 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-02 02:34:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 02:34:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 02:34:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 02:34:04 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 02:34:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 02:34:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 02:34:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 02:34:04 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-02 02:34:04 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:34:04 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Feb-02 02:34:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-02 02:34:05 LOG5 log_alfabeam: Parameters: 11.55252777777778 20.453472222222221 10.908850 2012.090642000659 -58.500080 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 0 11.552527777777780 20.453472222222221 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 1 11.553511794256378 20.363121944332541 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 2 11.559514866533776 20.422984577401746 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 3 11.558492856603692 20.514158610222971 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 4 11.551480829629559 20.543711024840075 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 5 11.545533322221196 20.482960130833071 2012-Feb-02 02:34:05 LOG4 log_alfabeam: ALFABEAM 6 11.546542156534002 20.393542955334290 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_056 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: patternid=203300070 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: scanid=203300071 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317686.0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317686.0 2012-Feb-02 02:34:05 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:34:05 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:34:05 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_056:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203300070:scanid=203300071:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317686.0:topobfreqhz=1306317686.0:filetype=1 2012-Feb-02 02:34:05 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:34:05 LOG5 begin_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2012-Feb-02 02:34:05 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:34:05 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:34:05 LOG5 end_task: Level: (5) ID = <10220> Status = 0 0 0 0 ok 2012-Feb-02 02:34:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:34:05 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:34:05 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 02:34:05 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:34:05 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Feb-02 02:34:05 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:34:05 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:34:05 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Feb-02 02:34:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:34:05 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300071 2012-Feb-02 02:34:05 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:34:05 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Feb-02 02:34:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:34:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:34:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:34:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-02 02:34:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23646.00 2012-Feb-02 02:34:07 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:34:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 02:34:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:34:10.01 2012-Feb-02 02:34:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328164450.01 Thu Feb 2 02:34:10 2012 2012-Feb-02 02:34:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317686 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:34:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.518 (still bad) 2012-Feb-02 02:34:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:34:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:34:16 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:34:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:34:16 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:34:16 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 02:34:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 02:34:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 02:34:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 02:34:16 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 02:34:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 02:34:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 02:34:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 02:34:16 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-02 02:34:16 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:34:16 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-02 02:34:16 LOG5 log_alfabeam: Parameters: 11.55252777777778 20.453472222222221 10.911914 2012.0906423492281 -58.500080 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 0 11.552527777777774 20.453472222222231 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 1 11.553518861539132 20.363137277540375 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 2 11.559517286868402 20.423092637953115 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 3 11.558487949511191 20.514254468591904 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 4 11.551473480878091 20.543694191509644 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 5 11.545530964944190 20.482847673696256 2012-Feb-02 02:34:16 LOG4 log_alfabeam: ALFABEAM 6 11.546546887481115 20.393450439833188 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_056 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: patternid=203300070 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: scanid=203300072 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317686.0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317686.0 2012-Feb-02 02:34:16 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:34:16 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:34:16 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_056:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203300070:scanid=203300072:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317686.0:topobfreqhz=1306317686.0:filetype=1 2012-Feb-02 02:34:16 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:34:16 LOG5 begin_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:34:16 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:34:16 LOG5 end_task: Level: (5) ID = <10225> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:34:16 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:34:16 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 02:34:16 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:34:16 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:34:16 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:34:16 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:34:16 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300072 2012-Feb-02 02:34:16 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:34:16 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Feb-02 02:34:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:34:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-02 02:34:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23657.00 2012-Feb-02 02:34:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:34:17 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.519 (still bad) 2012-Feb-02 02:34:19 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:34:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 02:34:19 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:19 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:34:22 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:34:22.00 2012-Feb-02 02:34:22 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328164462.00 Thu Feb 2 02:34:22 2012 2012-Feb-02 02:34:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317686 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:34:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:34:22 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-02 02:34:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:34:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:34:28 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:34:28 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:34:28 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:34:28 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 02:34:28 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-02 02:34:28 LOG5 finish_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-02 02:34:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:34:28 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-02 02:34:28 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-02 02:34:28 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 256.08 and ZA = 9.53 2012-Feb-02 02:34:28 LOG3 track_source: Calling 'track_source AGES1367_p1_056 256.08 9.5338531183 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:34:28 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:34:28 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_056} INFO {Slewing to source 'AGES1367_p1_056' ...} 2012-Feb-02 02:34:28 INFO1 track_source: Starting to track AGES1367_p1_056 2012-Feb-02 02:34:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_056" 2012-Feb-02 02:34:28 LOG3 vw_send: To DATATAKING: set ra 256.08 2012-Feb-02 02:34:28 LOG3 vw_send: To DATATAKING: set dec 9.5338531183 2012-Feb-02 02:34:28 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:34:28 LOG3 vw_send: To DATATAKING: pnt tr 256.08 9.5338531183 -CF 2012-Feb-02 02:34:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:34:28 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:34:28 LOG5 finish_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:34:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:34:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:34:28 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 LOG1 fixed_driftmap: Parameters: HA = -00:39:30.1 Start = 10:55:09.8 LST = 10:54:54.9 diff = 14.9 secs 2012-Feb-02 02:34:28 INFO2 fixed_driftmap: Waiting 12.9 seconds for RA 11:34:40 2012-Feb-02 02:34:28 INFO2 lstwait: Waiting for 12.8 secs from LST 10:54:55 to LST 10:55:08 ... 2012-Feb-02 02:34:28 LOG4 send_obs_status: To obs_status: <1> TASKTIME 12.838604459453347 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 02:34:28 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-02 02:34:28 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_056" 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: set ra 256.08 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: set dec 9.5338531183 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 256.08 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 9.5338531183 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: pnt tr 256.08 9.5338531183 -CF 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 02:34:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:34:41 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-02 02:34:41 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Feb-02 02:34:41 LOG4 lstwait: Finished waiting 0.16 seconds late 2012-Feb-02 02:34:41 INFO3 lstwait: Finished waiting 2012-Feb-02 02:34:41 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:34:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-02 02:34:41 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-02 02:34:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-02 02:34:41 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-02 02:34:41 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:34:41 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Feb-02 02:34:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-02 02:34:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_056 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: patternid=203300073 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: scanid=203300073 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317686.0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317686.0 2012-Feb-02 02:34:41 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:34:41 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:34:41 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_056:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203300073:scanid=203300073:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317686.0:topobfreqhz=1306317686.0:filetype=1 2012-Feb-02 02:34:41 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:34:41 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2012-Feb-02 02:34:41 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:34:41 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:34:41 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2012-Feb-02 02:34:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:34:41 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:34:41 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-02 02:34:41 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:34:41 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Feb-02 02:34:41 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:34:41 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:34:41 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Feb-02 02:34:41 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:34:41 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203300073 2012-Feb-02 02:34:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:34:42 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Feb-02 02:34:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:34:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:34:42 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:34:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-02 02:34:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23683.00 2012-Feb-02 02:34:43 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:34:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-02 02:34:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317686 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:34:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317686 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:34:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:34:46.01 2012-Feb-02 02:34:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328164486.01 Thu Feb 2 02:34:46 2012 2012-Feb-02 02:34:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 02:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 02:35:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 02:35:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 1.032 1.119 0.890 2012-Feb-02 02:35:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.897 0.972 1.044 2012-Feb-02 02:35:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.771 0.903 0.924 1.075 2012-Feb-02 02:35:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.869 0.020 0.946 0.020 2012-Feb-02 02:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 02:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 02:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 02:36:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 02:36:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 1.035 1.122 0.890 2012-Feb-02 02:36:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.094 0.898 0.972 1.047 2012-Feb-02 02:36:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.770 0.904 0.925 1.077 2012-Feb-02 02:36:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.869 0.020 0.946 0.020 2012-Feb-02 02:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 02:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 02:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-02 02:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 02:37:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 02:37:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.038 1.124 0.893 2012-Feb-02 02:37:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.898 0.972 1.045 2012-Feb-02 02:37:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 0.908 0.928 1.080 2012-Feb-02 02:37:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.868 0.020 0.944 0.020 2012-Feb-02 02:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 02:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:38:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:38:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.042 1.129 0.895 2012-Feb-02 02:38:04 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.899 0.975 1.048 2012-Feb-02 02:38:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 0.906 0.932 1.081 2012-Feb-02 02:38:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.872 0.020 0.949 0.019 2012-Feb-02 02:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 02:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:39:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.041 1.122 0.889 2012-Feb-02 02:39:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.093 0.898 0.973 1.046 2012-Feb-02 02:39:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 0.911 0.928 1.075 2012-Feb-02 02:39:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.869 0.020 0.944 0.019 2012-Feb-02 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 02:40:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:40:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.041 1.120 0.891 2012-Feb-02 02:40:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.898 0.973 1.047 2012-Feb-02 02:40:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.905 0.935 1.083 2012-Feb-02 02:40:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.868 0.020 0.944 0.019 2012-Feb-02 02:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:41:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:41:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.039 1.122 0.891 2012-Feb-02 02:41:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.899 0.971 1.049 2012-Feb-02 02:41:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 0.904 0.926 1.076 2012-Feb-02 02:41:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.867 0.020 0.944 0.019 2012-Feb-02 02:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 02:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:42:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.040 1.125 0.895 2012-Feb-02 02:42:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.096 0.902 0.977 1.050 2012-Feb-02 02:42:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 0.904 0.925 1.077 2012-Feb-02 02:42:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.868 0.020 0.946 0.019 2012-Feb-02 02:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:43:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:43:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.042 1.123 0.892 2012-Feb-02 02:43:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 0.902 0.972 1.048 2012-Feb-02 02:43:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 0.906 0.928 1.079 2012-Feb-02 02:43:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.873 0.020 0.952 0.019 2012-Feb-02 02:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 02:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 02:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 02:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-02 02:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:44:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:44:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.042 1.121 0.892 2012-Feb-02 02:44:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.100 0.900 0.975 1.048 2012-Feb-02 02:44:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 0.905 0.931 1.083 2012-Feb-02 02:44:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.868 0.020 0.946 0.019 2012-Feb-02 02:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:45:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:45:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.046 1.125 0.891 2012-Feb-02 02:45:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.098 0.900 0.974 1.049 2012-Feb-02 02:45:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 0.904 0.926 1.079 2012-Feb-02 02:45:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.869 0.019 0.946 0.019 2012-Feb-02 02:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:46:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:46:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.044 1.127 0.897 2012-Feb-02 02:46:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.106 0.906 0.977 1.049 2012-Feb-02 02:46:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 0.906 0.928 1.080 2012-Feb-02 02:46:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.869 0.019 0.947 0.019 2012-Feb-02 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:47:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:47:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.043 1.127 0.896 2012-Feb-02 02:47:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.105 0.904 0.977 1.052 2012-Feb-02 02:47:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.911 0.935 1.084 2012-Feb-02 02:47:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.874 0.019 0.951 0.019 2012-Feb-02 02:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 02:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 16-31 errors 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b4s1g0): PFB = 4-7 errors 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 32-63 errors 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b6s1g0): PFB = 16-31 errors 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 2-3 errors 2012-Feb-02 02:48:15 WARNING got_mock_message: WARNING Mock spectrometer overflow (b3s1g0): PFB = 8-15 errors 2012-Feb-02 02:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:48:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:48:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.046 1.126 0.895 2012-Feb-02 02:48:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.107 0.904 0.978 1.053 2012-Feb-02 02:48:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 0.908 0.935 1.082 2012-Feb-02 02:48:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.872 0.019 0.950 0.019 2012-Feb-02 02:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:48:27 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Feb-02 02:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-02 02:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.138 (still bad) 2012-Feb-02 02:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-02 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.140 (still bad) 2012-Feb-02 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.141 (still bad) 2012-Feb-02 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-02 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:48:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 16-31 errors 2012-Feb-02 02:48:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 8-15 errors 2012-Feb-02 02:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b5s1g0): PFB = 4-7 errors 2012-Feb-02 02:49:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b0s1g0): PFB = 2-3 errors 2012-Feb-02 02:49:03 WARNING got_mock_message: WARNING Mock spectrometer overflow (b2s1g0): PFB = 4-7 errors 2012-Feb-02 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:49:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.044 1.129 0.893 2012-Feb-02 02:49:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.105 0.902 0.978 1.053 2012-Feb-02 02:49:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 0.906 0.930 1.083 2012-Feb-02 02:49:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.873 0.019 0.950 0.019 2012-Feb-02 02:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-02 02:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-02 02:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:50:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:50:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.045 1.128 0.894 2012-Feb-02 02:50:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 0.900 0.976 1.052 2012-Feb-02 02:50:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 0.909 0.931 1.083 2012-Feb-02 02:50:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.871 0.019 0.950 0.019 2012-Feb-02 02:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:51:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:51:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.046 1.132 0.898 2012-Feb-02 02:51:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 0.899 0.977 1.051 2012-Feb-02 02:51:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 0.914 0.932 1.085 2012-Feb-02 02:51:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.870 0.019 0.946 0.019 2012-Feb-02 02:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 02:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-02 02:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:51:51 WARNING got_mock_message: WARNING Mock spectrometer overflow (b1s1g0): PFB = 2-3 errors 2012-Feb-02 02:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-02 02:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-02 02:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:52:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:52:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.049 1.128 0.897 2012-Feb-02 02:52:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.104 0.903 0.978 1.054 2012-Feb-02 02:52:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 0.910 0.933 1.083 2012-Feb-02 02:52:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.874 0.019 0.950 0.019 2012-Feb-02 02:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-02 02:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-02 02:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.131 (still bad) 2012-Feb-02 02:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-02 02:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.129 (still bad) 2012-Feb-02 02:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.135 (still bad) 2012-Feb-02 02:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:53:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:53:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.051 1.128 0.898 2012-Feb-02 02:53:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.103 0.906 0.977 1.054 2012-Feb-02 02:53:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.913 0.932 1.086 2012-Feb-02 02:53:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.874 0.019 0.949 0.019 2012-Feb-02 02:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.136 (still bad) 2012-Feb-02 02:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.130 (still bad) 2012-Feb-02 02:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 02:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 02:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:54:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 02:54:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.049 1.127 0.897 2012-Feb-02 02:54:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.105 0.906 0.976 1.054 2012-Feb-02 02:54:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.781 0.912 0.934 1.086 2012-Feb-02 02:54:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.874 0.019 0.950 0.019 2012-Feb-02 02:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 02:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 02:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.133 (still bad) 2012-Feb-02 02:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 02:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 02:54:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:54:47 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:54:47 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:54:47 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Feb-02 02:54:47 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:54:47 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Feb-02 02:54:47 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-02 02:54:47 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-02 02:54:47 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-02 02:54:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 02:54:47 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-02 02:54:47 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Feb-02 02:54:47 COMMAND run_command_line: EXECUTING command 58: 'ENDIF' 2012-Feb-02 02:54:47 COMMAND run_command_line: EXECUTING command 61: 'IF LSTSLEW(AGES1367_p1_058) < 111839 THEN' 2012-Feb-02 02:54:48 LOG3 is_if_valid: Current source data: up 605.7 5.0 UP - - 102 1.9 2012-Feb-02 02:54:48 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_058) < 111839 2012-Feb-02 02:54:48 INFO5 is_if_valid: Condition parsed as: 11.286461666666666 < 11.310833333333335 2012-Feb-02 02:54:48 COMMAND run_command_line: EXECUTING command 62: 'FIXEDDRIFT az=241.63 alfaangle=-40.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_058 ra=113400.00 dec=202430.00' 2012-Feb-02 02:54:48 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-02 02:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 02:54:48 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 02:54:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 241.63 -40.1 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_058 113400.00 202430.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:54:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-02 02:54:48 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-02 02:54:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p1_056' 2012-Feb-02 02:54:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-02 02:54:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_058} 2012-Feb-02 02:54:48 INFO3 fixed_driftmap: Sending telescope to Az = 241.63 and ZA = 4.26 2012-Feb-02 02:54:48 LOG3 track_source: Calling 'track_source AGES1367_p1_058 241.63 4.2626956826 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:54:48 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:54:48 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-02 02:54:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_058} INFO {Slewing to source 'AGES1367_p1_058' ...} 2012-Feb-02 02:54:49 INFO1 track_source: Starting to track AGES1367_p1_058 2012-Feb-02 02:54:49 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_058" 2012-Feb-02 02:54:49 LOG3 vw_send: To DATATAKING: set ra 241.63 2012-Feb-02 02:54:49 LOG3 vw_send: To DATATAKING: set dec 4.2626956826 2012-Feb-02 02:54:49 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:54:49 LOG3 vw_send: To DATATAKING: pnt tr 241.63 4.2626956826 -CF 2012-Feb-02 02:54:49 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:54:49 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:54:49 LOG5 finish_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-02 02:54:49 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:54:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:54:49 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:54:49 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2012-Feb-02 02:54:49 START begin_task: Starting task 'rotate ALFA to -40.1 degrees' 2012-Feb-02 02:54:49 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-02 02:54:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -40.1 degrees ...} 2012-Feb-02 02:54:49 INFO2 rotate_alfa: ALFA commanded to -40.1 degrees 2012-Feb-02 02:54:49 LOG3 sock_errsend: To ALFAMOTOR: POSITION -40.1 REPLY 2012-Feb-02 02:54:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-02 02:54:49 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-02 02:54:49 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_058" 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: set ra 241.63 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: set dec 4.2626956826 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: vw% 241.63 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: vw% 4.2626956826 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: pnt tr 241.63 4.2626956826 -CF 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 02:54:49 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:55:00 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-02 02:55:00 INFO3 alfa_motor: ALFA rotator in-position -40.10 degrees 2012-Feb-02 02:55:00 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-02 02:55:00 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2012-Feb-02 02:55:00 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:55:00 STOP finish_task: Finishing task 'rotate ALFA to -40.1 degrees' 2012-Feb-02 02:55:00 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-02 02:55:00 INFO2 finish_task: DONE finished configuration: rotating ALFA to -40.1 degrees 2012-Feb-02 02:55:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:55:00 STOP end_task: Finishing task 'rotate ALFA to -40.1 degrees' with status 'OK' 2012-Feb-02 02:55:00 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Feb-02 02:55:00 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 02:55:00 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-02 02:55:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 02:55:00 LOG3 waittrk: Start waittrk 5 2012-Feb-02 02:55:00 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 02:55:00 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-02 02:55:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 02:55:06 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2012-Feb-02 02:55:06 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 02:55:06 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Feb-02 02:57:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 02:57:06 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Feb-02 02:57:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:57:06 INFO2 waittrk: Now tracking AGES1367_p1_058 2012-Feb-02 02:57:06 LOG4 waittrk: Current telescope position: Az = 600.86 ZA = 4.26 2012-Feb-02 02:57:06 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 02:57:06 LOG5 finish_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-02 02:57:06 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 02:57:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 02:57:06 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2012-Feb-02 02:57:06 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 02:57:06 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2012-Feb-02 02:57:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 02:57:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 02:57:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:57:06 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 02:57:06 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2012-Feb-02 02:57:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 02:57:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:57:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:07 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:57:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 02:57:07 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2012-Feb-02 02:57:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 02:57:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:57:07 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 02:57:07 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:57:07 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Feb-02 02:57:07 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:07 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:57:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:57:07 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Feb-02 02:57:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:57:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 02:57:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:57:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:57:07 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:57:07 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Feb-02 02:57:07 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:57:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:57:07 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Feb-02 02:57:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:57:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:57:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 02:57:07 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2012-Feb-02 02:57:07 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-02 02:57:07 INFO2 astwait: Waiting for 1 seconds from 06:57:07 to 06:57:08 UTC ... 2012-Feb-02 02:57:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 1 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 02:57:07 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-02 02:57:07 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-02 02:57:08 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 INFO3 astwait: Finished waiting 2012-Feb-02 02:57:08 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:57:08 LOG5 dopset_later: Calling 'dopset_later 61.205188933037761' 2012-Feb-02 02:57:08 INFO3 dopset_later: Setting Doppler correction for 02:58:08 (61.2 seconds from now) 2012-Feb-02 02:57:08 LOG5 antvel: Calling 'antvel 241.630000 4.262696 F Heliocentric 61.205188933037761' 2012-Feb-02 02:57:08 LOG2 antvel: Transforming current Az = 241.63 ZA = 4.26 to apparent RA = 11:34:39.8 Dec = +20:20:11.8 2012-Feb-02 02:57:08 LOG2 antvel: Parameters to Doppler: Heliocentric 25088 2012 33 0.0 2012-Feb-02 02:57:08 INFO5 antvel: Computed antenna velocity: -16.08014 km/s 2012-Feb-02 02:57:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-16.080136045 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-02 02:57:08 INFO4 dopset_gen: New sky frequencies: 1381.317519 1381.317519 1381.317519 1381.317519 1381.317519 1381.317519 1381.317519 1381.317519 1381.317519 2012-Feb-02 02:57:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.317519 sky0=1381.317519 sky1=1381.317519 sky2=1381.317519 sky3=1381.317519 sky4=1381.317519 sky5=1381.317519 sky6=1381.317519 sky7=1381.317519 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 02:57:08 LOG2 dopset_gen: Result from 'sky2syn': 1631.317519 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631317519.0} 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 02:57:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-02 02:57:08 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-02 02:57:08 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.7 Dec = +20:24:12.5 2012-Feb-02 02:57:08 LOG3 track_source: Calling 'track_source AGES1367_p1_058 113303.7 202412.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:57:08 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:57:08 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_058} INFO {Slewing to source 'AGES1367_p1_058' ...} 2012-Feb-02 02:57:08 INFO1 track_source: Starting to track AGES1367_p1_058 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_058" 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: set ra 113303.7 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: set dec 202412.5 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: pnt tr 113303.7 202412.5 -CJ 2012-Feb-02 02:57:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:57:08 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:57:08 LOG5 finish_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:57:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:57:08 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 02:57:08 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 02:57:08 LOG3 waittrk: Start waittrk 5 2012-Feb-02 02:57:08 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 02:57:08 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631317519.0} 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_058" 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: set ra 113303.7 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: set dec 202412.5 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.7 202412.5 -CJ 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: vw% 113303.7 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: vw% 202412.5 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-02 02:57:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 02:57:13 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2012-Feb-02 02:57:13 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 02:57:13 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Feb-02 02:57:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 02:57:16 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Feb-02 02:57:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:57:16 INFO2 waittrk: Now tracking AGES1367_p1_058 2012-Feb-02 02:57:16 LOG4 waittrk: Current telescope position: Az = 600.79 ZA = 4.24 2012-Feb-02 02:57:16 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 02:57:16 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-02 02:57:16 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 02:57:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 02:57:16 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Feb-02 02:57:16 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-02 02:57:16 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-02 02:57:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-02 02:57:16 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-02 02:57:16 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-02 02:57:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-02 02:57:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:57:16 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-02 02:57:16 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-02 02:57:16 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-02 02:57:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:19 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:57:19 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-02 02:57:19 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2012-Feb-02 02:57:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-02 02:57:19 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 02:57:19 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-02 02:57:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 02:57:19 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:57:19 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:57:19 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:57:19 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 02:57:19 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-02 02:57:19 LOG5 begin_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-02 02:57:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-02 02:57:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2012-Feb-02 02:57:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Feb-02 02:57:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Feb-02 02:57:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Feb-02 02:57:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-02 02:57:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-02 02:57:20 LOG5 end_task: Level: (5) ID = <10253> Status = 0 0 0 0 ok 2012-Feb-02 02:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.026 1.018 ALFA beam 1: 1.092 1.117 2012-Feb-02 02:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.080 0.898 ALFA beam 3: 0.975 1.034 2012-Feb-02 02:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.772 1.107 ALFA beam 5: 1.101 1.022 2012-Feb-02 02:57:20 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.091 0.014 ALFA beam 7: 0.950 0.014 2012-Feb-02 02:57:20 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 02:57:20 LOG5 finish_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-02 02:57:20 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-02 02:57:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:20 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 02:57:20 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Feb-02 02:57:20 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-02 02:57:20 LOG5 begin_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-02 02:57:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 02:57:20 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-02 02:57:20 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-02 02:57:20 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-02 02:57:20 LOG5 begin_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-02 02:57:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-02 02:57:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 1.018 1.092 1.117 2012-Feb-02 02:57:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.898 0.975 1.034 2012-Feb-02 02:57:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.772 1.107 1.101 1.022 2012-Feb-02 02:57:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.091 0.014 0.950 0.014 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.5 26.8 B 29.5 29.6 mn:A 0.2 0.1 B -0.1 -0.4 gn: 11 11 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.8 29.4 B 30.9 32.7 mn:A 0.1 -0.6 B -0.6 0.2 gn: 12 12 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b1s0g0 rms:A 29.7 27.8 B 32.4 28.1 mn:A 0.4 0.6 B 0.1 -0.1 gn: 7 11 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.7 30.2 B 30.7 30.7 mn:A -0.5 -0.4 B 0.6 0.3 gn: 9 10 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.5 30.5 B 30.4 31.8 mn:A 0.0 -0.3 B 0.4 0.1 gn: 11 12 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.7 29.0 B 31.2 29.0 mn:A 0.3 -0.2 B 0.1 0.2 gn: 11 12 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 31.1 B 30.0 26.8 mn:A 0.4 -0.3 B 0.1 -0.3 gn: 13 12 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.2 28.5 B 28.4 29.6 mn:A -0.3 0.3 B 0.2 0.2 gn: 12 12 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.2 28.4 B 28.6 28.7 mn:A -0.3 -0.3 B -0.5 -0.0 gn: 13 11 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.2 28.2 B 30.8 29.6 mn:A 0.1 -0.0 B -0.4 0.1 gn: 16 13 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.7 30.6 B 29.4 29.4 mn:A 0.6 0.6 B 0.1 0.6 gn: 13 11 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.5 28.3 B 29.7 29.4 mn:A -0.2 0.4 B 0.0 0.3 gn: 12 11 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.3 29.6 B 14.1 14.5 mn:A -0.5 0.3 B 0.4 -0.3 gn: 13 31 2012-Feb-02 02:57:27 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.0 29.9 B 11.1 10.8 mn:A 0.7 0.5 B 0.1 0.2 gn: 14 31 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (5) ID = <10255> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-02 02:57:27 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-02 02:57:27 LOG5 finish_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-02 02:57:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (4) ID = <10254> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 02:57:27 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-02 02:57:27 LOG5 finish_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-02 02:57:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:57:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:57:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:57:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 02:57:27 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-02 02:57:27 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-02 02:57:27 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-02 02:57:27 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 02:57:27 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 02:57:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 02:57:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:57:27 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 02:57:27 LOG5 begin_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 02:57:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 02:57:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 02:57:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:27 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (5) ID = <10258> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 02:57:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:57:27 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 02:57:27 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:57:27 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:27 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:57:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 02:57:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 02:57:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:57:27 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 02:57:27 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Feb-02 02:57:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 02:57:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 02:57:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 02:57:27 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-02 02:57:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 02:57:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 02:57:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 02:57:28 LOG5 begin_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 02:57:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 02:57:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 02:57:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 02:57:28 LOG5 end_task: Level: (4) ID = <10261> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-02 02:57:28 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:57:28 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-02 02:57:28 LOG5 log_alfabeam: Parameters: 11.551027777777778 20.40347222222222 11.299640 2012.0906864590463 -40.100021 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 0 11.551027777777776 20.403472222222220 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 1 11.551479013870138 20.310730584635635 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 2 11.557657442458108 20.371853046764166 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 3 11.557115177507114 20.466481683960975 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 4 11.550416561395750 20.496718458904361 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 5 11.544397161090160 20.432475299920295 2012-Feb-02 02:57:28 LOG4 log_alfabeam: ALFABEAM 6 11.544915244663622 20.341096066102182 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_058 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: patternid=203300073 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: scanid=203300074 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317519.0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317519.0 2012-Feb-02 02:57:28 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:57:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:57:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_058:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203300073:scanid=203300074:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317519.0:topobfreqhz=1306317519.0:filetype=1 2012-Feb-02 02:57:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:57:28 LOG5 begin_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:57:28 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:57:28 LOG5 end_task: Level: (5) ID = <10263> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:57:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:57:28 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 02:57:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:57:28 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20120202.a2048.0004.fits 2012-Feb-02 02:57:28 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:57:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:57:28 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:57:28 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300074 2012-Feb-02 02:57:28 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:57:28 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Feb-02 02:57:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120202.a2048.0004.fits} 2012-Feb-02 02:57:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:57:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25049.00 2012-Feb-02 02:57:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-02 02:57:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:57:29 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:57:31 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:57:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 02:57:31 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:31 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:34 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:57:34.00 2012-Feb-02 02:57:34 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328165854.00 Thu Feb 2 02:57:34 2012 2012-Feb-02 02:57:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317519 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:57:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:57:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.576 (still bad) 2012-Feb-02 02:57:40 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:57:40 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:57:40 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:57:40 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:57:40 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 02:57:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 02:57:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 02:57:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 02:57:40 LOG5 begin_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 02:57:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 02:57:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 02:57:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 02:57:40 LOG5 end_task: Level: (4) ID = <10266> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-02 02:57:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:57:40 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-02 02:57:40 LOG5 log_alfabeam: Parameters: 11.551027777777778 20.40347222222222 11.302982 2012.0906868393033 -40.100021 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 0 11.551027777777771 20.403472222222220 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 1 11.551514525311267 20.310769584167005 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 2 11.557669736986396 20.372354030882661 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 3 11.557090244753919 20.466955522660562 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 4 11.550379209077818 20.496672006646502 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 5 11.544385935737553 20.431948583905406 2012-Feb-02 02:57:40 LOG4 log_alfabeam: ALFABEAM 6 11.544939623257392 20.340627086581851 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_058 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: patternid=203300073 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: scanid=203300075 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317519.0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317519.0 2012-Feb-02 02:57:40 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:57:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:57:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_058:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203300073:scanid=203300075:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317519.0:topobfreqhz=1306317519.0:filetype=1 2012-Feb-02 02:57:40 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:57:40 LOG5 begin_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:57:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:57:40 LOG5 end_task: Level: (5) ID = <10268> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:57:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:57:40 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 02:57:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:57:40 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:57:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:57:40 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:57:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300075 2012-Feb-02 02:57:40 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:57:40 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Feb-02 02:57:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:57:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-02 02:57:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25061.00 2012-Feb-02 02:57:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:57:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.576 (still bad) 2012-Feb-02 02:57:43 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:57:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 02:57:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 02:57:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:57:46.01 2012-Feb-02 02:57:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328165866.01 Thu Feb 2 02:57:46 2012 2012-Feb-02 02:57:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317519 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:57:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:57:46 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-02 02:57:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:57:52 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 02:57:52 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 02:57:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 02:57:52 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 02:57:52 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 02:57:52 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-02 02:57:52 LOG5 finish_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-02 02:57:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:52 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-02 02:57:52 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-02 02:57:52 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 241.63 and ZA = 4.26 2012-Feb-02 02:57:52 LOG3 track_source: Calling 'track_source AGES1367_p1_058 241.63 4.2626956826 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 02:57:52 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 02:57:52 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_058} INFO {Slewing to source 'AGES1367_p1_058' ...} 2012-Feb-02 02:57:52 INFO1 track_source: Starting to track AGES1367_p1_058 2012-Feb-02 02:57:52 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_058" 2012-Feb-02 02:57:52 LOG3 vw_send: To DATATAKING: set ra 241.63 2012-Feb-02 02:57:52 LOG3 vw_send: To DATATAKING: set dec 4.2626956826 2012-Feb-02 02:57:52 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 02:57:52 LOG3 vw_send: To DATATAKING: pnt tr 241.63 4.2626956826 -CF 2012-Feb-02 02:57:52 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:57:52 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 02:57:52 LOG5 finish_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 02:57:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 02:57:52 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 02:57:52 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 LOG1 fixed_driftmap: Parameters: HA = -00:15:59.9 Start = 11:18:40.0 LST = 11:18:22.8 diff = 17.3 secs 2012-Feb-02 02:57:52 INFO2 fixed_driftmap: Waiting 15.3 seconds for RA 11:34:40 2012-Feb-02 02:57:52 INFO2 lstwait: Waiting for 15.2 secs from LST 11:18:23 to LST 11:18:38 ... 2012-Feb-02 02:57:52 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.209519349681274 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 02:57:52 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-02 02:57:52 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_058" 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: set ra 241.63 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: set dec 4.2626956826 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: vw% 241.63 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: vw% 4.2626956826 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: pnt tr 241.63 4.2626956826 -CF 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 02:57:52 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-02 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:58:07 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-02 02:58:07 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Feb-02 02:58:07 LOG4 lstwait: Finished waiting 0.79 seconds late 2012-Feb-02 02:58:07 INFO3 lstwait: Finished waiting 2012-Feb-02 02:58:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 02:58:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-02 02:58:07 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-02 02:58:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-02 02:58:07 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-02 02:58:07 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 02:58:07 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Feb-02 02:58:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-02 02:58:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_058 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: patternid=203300076 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: scanid=203300076 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 02:58:07 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 02:58:08 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 02:58:08 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317519.0 2012-Feb-02 02:58:08 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317519.0 2012-Feb-02 02:58:08 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 02:58:08 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 02:58:08 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_058:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203300076:scanid=203300076:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317519.0:topobfreqhz=1306317519.0:filetype=1 2012-Feb-02 02:58:08 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 02:58:08 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2012-Feb-02 02:58:08 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 02:58:08 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 02:58:08 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2012-Feb-02 02:58:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 02:58:08 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 02:58:08 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-02 02:58:08 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 02:58:08 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Feb-02 02:58:08 LOG4 from_mock: From MOCK: starok 2012-Feb-02 02:58:08 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 02:58:08 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Feb-02 02:58:08 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 02:58:08 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203300076 2012-Feb-02 02:58:08 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 02:58:08 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Feb-02 02:58:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 02:58:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 02:58:08 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 02:58:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-02 02:58:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25089.00 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317519 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 02:58:10 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 02:58:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Feb-02 02:58:10 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 02:58:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317519 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 02:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Feb-02 02:58:13 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:58:13.01 2012-Feb-02 02:58:13 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328165893.01 Thu Feb 2 02:58:13 2012 2012-Feb-02 02:58:13 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 02:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 02:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 02:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 02:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 02:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 02:58:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-02 02:58:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.027 1.093 1.125 2012-Feb-02 02:58:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.903 0.981 1.041 2012-Feb-02 02:58:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.113 1.116 1.032 2012-Feb-02 02:58:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.022 0.910 0.022 2012-Feb-02 02:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 02:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 02:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 02:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 02:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Feb-02 02:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 02:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 02:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 02:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 02:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 02:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 02:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 02:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 02:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 02:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:59:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 02:59:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.019 1.088 1.118 2012-Feb-02 02:59:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.898 0.975 1.034 2012-Feb-02 02:59:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.774 1.108 1.106 1.023 2012-Feb-02 02:59:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.020 0.904 0.020 2012-Feb-02 02:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 02:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 02:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 02:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 02:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 02:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 03:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 03:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-02 03:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-02 03:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-02 03:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:00:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:00:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.022 1.094 1.122 2012-Feb-02 03:00:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 0.896 0.975 1.033 2012-Feb-02 03:00:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.113 1.107 1.022 2012-Feb-02 03:00:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.020 0.904 0.020 2012-Feb-02 03:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-02 03:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-02 03:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 03:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 03:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:01:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:01:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.020 1.088 1.120 2012-Feb-02 03:01:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.896 0.973 1.033 2012-Feb-02 03:01:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.108 1.104 1.023 2012-Feb-02 03:01:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.020 0.907 0.021 2012-Feb-02 03:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-02 03:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.016 1.087 1.119 2012-Feb-02 03:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 0.897 0.977 1.035 2012-Feb-02 03:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.111 1.106 1.022 2012-Feb-02 03:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.020 0.907 0.021 2012-Feb-02 03:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-02 03:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 03:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.018 1.087 1.120 2012-Feb-02 03:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.084 0.897 0.976 1.033 2012-Feb-02 03:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.773 1.106 1.115 1.028 2012-Feb-02 03:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.021 0.904 0.022 2012-Feb-02 03:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:04:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:04:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.023 1.088 1.122 2012-Feb-02 03:04:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.895 0.977 1.035 2012-Feb-02 03:04:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.108 1.106 1.021 2012-Feb-02 03:04:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.040 0.020 0.905 0.021 2012-Feb-02 03:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 03:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 03:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 03:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 03:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 03:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 03:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 03:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-02 03:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:05:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:05:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.022 1.090 1.121 2012-Feb-02 03:05:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.896 0.977 1.033 2012-Feb-02 03:05:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.775 1.108 1.103 1.022 2012-Feb-02 03:05:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.020 0.905 0.021 2012-Feb-02 03:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-02 03:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 03:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 03:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 03:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 03:06:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 03:06:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.022 1.091 1.118 2012-Feb-02 03:06:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 0.900 0.978 1.036 2012-Feb-02 03:06:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.112 1.108 1.026 2012-Feb-02 03:06:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.019 0.907 0.020 2012-Feb-02 03:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-02 03:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.134 (still bad) 2012-Feb-02 03:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2012-Feb-02 03:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.137 (still bad) 2012-Feb-02 03:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.139 (still bad) 2012-Feb-02 03:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.138 (still bad) 2012-Feb-02 03:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.134 (still bad) 2012-Feb-02 03:07:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-02 03:07:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.024 1.103 1.133 2012-Feb-02 03:07:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.092 0.905 0.985 1.043 2012-Feb-02 03:07:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.776 1.110 1.108 1.027 2012-Feb-02 03:07:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.022 0.909 0.022 2012-Feb-02 03:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Feb-02 03:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-02 03:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:08:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:08:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.022 1.094 1.124 2012-Feb-02 03:08:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.091 0.906 0.984 1.044 2012-Feb-02 03:08:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.118 1.112 1.032 2012-Feb-02 03:08:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.021 0.914 0.020 2012-Feb-02 03:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 03:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 03:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 03:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 03:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 03:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:09:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:09:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.020 1.090 1.120 2012-Feb-02 03:09:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.899 0.983 1.038 2012-Feb-02 03:09:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.112 1.109 1.026 2012-Feb-02 03:09:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.043 0.020 0.908 0.021 2012-Feb-02 03:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.131 (still bad) 2012-Feb-02 03:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.130 (still bad) 2012-Feb-02 03:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-02 03:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-02 03:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-02 03:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-02 03:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 03:10:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 1.033 1.090 1.121 2012-Feb-02 03:10:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.083 0.897 0.979 1.036 2012-Feb-02 03:10:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.115 1.109 1.026 2012-Feb-02 03:10:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.021 0.910 0.021 2012-Feb-02 03:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.131 (still bad) 2012-Feb-02 03:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-02 03:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-02 03:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-02 03:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:11:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:11:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.023 1.099 1.126 2012-Feb-02 03:11:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.097 0.908 0.978 1.037 2012-Feb-02 03:11:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.112 1.107 1.025 2012-Feb-02 03:11:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.020 0.908 0.021 2012-Feb-02 03:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Feb-02 03:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 03:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 03:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 03:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Feb-02 03:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.129 (still bad) 2012-Feb-02 03:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:12:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Feb-02 03:12:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.026 1.094 1.121 2012-Feb-02 03:12:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.900 0.979 1.039 2012-Feb-02 03:12:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.778 1.113 1.108 1.027 2012-Feb-02 03:12:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.022 0.910 0.022 2012-Feb-02 03:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.127 (still bad) 2012-Feb-02 03:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Feb-02 03:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Feb-02 03:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.120 (still bad) 2012-Feb-02 03:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Feb-02 03:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.133 (still bad) 2012-Feb-02 03:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:13:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:13:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.028 1.094 1.124 2012-Feb-02 03:13:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.088 0.903 0.984 1.040 2012-Feb-02 03:13:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.121 1.110 1.027 2012-Feb-02 03:13:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.020 0.911 0.021 2012-Feb-02 03:13:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 03:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 03:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 03:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 03:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 03:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.126 (still bad) 2012-Feb-02 03:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 03:14:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.025 1.094 1.122 2012-Feb-02 03:14:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.089 0.904 0.981 1.038 2012-Feb-02 03:14:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.114 1.111 1.027 2012-Feb-02 03:14:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.021 0.910 0.021 2012-Feb-02 03:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Feb-02 03:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-02 03:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-02 03:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-02 03:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-02 03:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-02 03:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Feb-02 03:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-02 03:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.149 (still bad) 2012-Feb-02 03:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.137 (still bad) 2012-Feb-02 03:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.134 (still bad) 2012-Feb-02 03:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.132 (still bad) 2012-Feb-02 03:15:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 03:15:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.031 1.096 1.128 2012-Feb-02 03:15:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.086 0.904 0.978 1.038 2012-Feb-02 03:15:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.777 1.113 1.106 1.025 2012-Feb-02 03:15:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.019 0.909 0.020 2012-Feb-02 03:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-02 03:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-02 03:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-02 03:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-02 03:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.134 (still bad) 2012-Feb-02 03:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:16:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:16:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.027 1.093 1.125 2012-Feb-02 03:16:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.085 0.906 0.980 1.040 2012-Feb-02 03:16:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.116 1.107 1.029 2012-Feb-02 03:16:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.020 0.910 0.020 2012-Feb-02 03:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.133 (still bad) 2012-Feb-02 03:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-02 03:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Feb-02 03:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-02 03:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Feb-02 03:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-02 03:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Feb-02 03:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.136 (still bad) 2012-Feb-02 03:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-02 03:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Feb-02 03:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.128 (still bad) 2012-Feb-02 03:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Feb-02 03:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 03:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:17:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 03:17:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 1.026 1.092 1.127 2012-Feb-02 03:17:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.087 0.912 0.985 1.048 2012-Feb-02 03:17:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.113 1.103 1.029 2012-Feb-02 03:17:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.045 0.019 0.909 0.020 2012-Feb-02 03:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 03:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.126 (still bad) 2012-Feb-02 03:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Feb-02 03:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.127 (still bad) 2012-Feb-02 03:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:18:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 03:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:18:14 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 03:18:14 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 03:18:14 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 03:18:14 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Feb-02 03:18:14 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 03:18:14 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Feb-02 03:18:14 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Feb-02 03:18:14 LOG5 finish_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-02 03:18:14 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Feb-02 03:18:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Feb-02 03:18:14 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Feb-02 03:18:14 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2012-Feb-02 03:18:14 COMMAND run_command_line: EXECUTING command 65: 'ENDIF' 2012-Feb-02 03:18:14 COMMAND run_command_line: EXECUTING command 68: 'IF LSTSLEW(AGES1367_p1_060) < 114439 THEN' 2012-Feb-02 03:18:15 LOG3 is_if_valid: Current source data: up 513.1 2.2 UP - - 79 3.7 2012-Feb-02 03:18:15 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_060) < 114439 2012-Feb-02 03:18:15 INFO5 is_if_valid: Condition parsed as: 11.708364666666668 < 11.744166666666667 2012-Feb-02 03:18:15 COMMAND run_command_line: EXECUTING command 69: 'FIXEDDRIFT az=129.73 alfaangle=65.8 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_060 ra=113400.00 dec=202130.00' 2012-Feb-02 03:18:15 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Feb-02 03:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:18:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Feb-02 03:18:15 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 129.73 65.8 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_060 113400.00 202130.00 J 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 03:18:15 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Feb-02 03:18:15 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2012-Feb-02 03:18:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p1_058' 2012-Feb-02 03:18:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Feb-02 03:18:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_060} 2012-Feb-02 03:18:15 INFO3 fixed_driftmap: Sending telescope to Az = 129.73 and ZA = 3.05 2012-Feb-02 03:18:15 LOG3 track_source: Calling 'track_source AGES1367_p1_060 129.73 3.0500022980 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 03:18:15 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 03:18:15 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-02 03:18:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_060} INFO {Slewing to source 'AGES1367_p1_060' ...} 2012-Feb-02 03:18:16 INFO1 track_source: Starting to track AGES1367_p1_060 2012-Feb-02 03:18:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_060" 2012-Feb-02 03:18:16 LOG3 vw_send: To DATATAKING: set ra 129.73 2012-Feb-02 03:18:16 LOG3 vw_send: To DATATAKING: set dec 3.0500022980 2012-Feb-02 03:18:16 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 03:18:16 LOG3 vw_send: To DATATAKING: pnt tr 129.73 3.0500022980 -CF 2012-Feb-02 03:18:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 03:18:16 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 03:18:16 LOG5 finish_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-02 03:18:16 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 03:18:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:18:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 03:18:16 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2012-Feb-02 03:18:16 START begin_task: Starting task 'rotate ALFA to +65.8 degrees' 2012-Feb-02 03:18:16 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-02 03:18:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +65.8 degrees ...} 2012-Feb-02 03:18:16 INFO2 rotate_alfa: ALFA commanded to +65.8 degrees 2012-Feb-02 03:18:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 65.8 REPLY 2012-Feb-02 03:18:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Feb-02 03:18:16 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Feb-02 03:18:16 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_060" 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: set ra 129.73 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: set dec 3.0500022980 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: vw% 129.73 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: vw% 3.0500022980 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: pnt tr 129.73 3.0500022980 -CF 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 03:18:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:19:15 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Feb-02 03:19:15 INFO3 alfa_motor: ALFA rotator in-position +65.80 degrees 2012-Feb-02 03:19:15 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Feb-02 03:19:15 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2012-Feb-02 03:19:15 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 03:19:15 STOP finish_task: Finishing task 'rotate ALFA to +65.8 degrees' 2012-Feb-02 03:19:15 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-02 03:19:15 INFO2 finish_task: DONE finished configuration: rotating ALFA to +65.8 degrees 2012-Feb-02 03:19:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:19:15 STOP end_task: Finishing task 'rotate ALFA to +65.8 degrees' with status 'OK' 2012-Feb-02 03:19:15 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Feb-02 03:19:15 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 03:19:15 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-02 03:19:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 03:19:15 LOG3 waittrk: Start waittrk 5 2012-Feb-02 03:19:15 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 03:19:15 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-02 03:19:20 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 03:19:20 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2012-Feb-02 03:19:20 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 03:19:20 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Feb-02 03:22:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 03:22:55 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Feb-02 03:22:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 03:22:56 INFO2 waittrk: Now tracking AGES1367_p1_060 2012-Feb-02 03:22:56 LOG4 waittrk: Current telescope position: Az = 489.46 ZA = 3.05 2012-Feb-02 03:22:56 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 03:22:56 LOG5 finish_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-02 03:22:56 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 03:22:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:22:56 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 03:22:56 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2012-Feb-02 03:22:56 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 03:22:56 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2012-Feb-02 03:22:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 03:22:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 03:22:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 03:22:56 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 03:22:56 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2012-Feb-02 03:22:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 03:22:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 03:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:22:57 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 03:22:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 03:22:57 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2012-Feb-02 03:22:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 03:22:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 03:22:57 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 03:22:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 03:22:57 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Feb-02 03:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:22:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 03:22:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 03:22:57 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Feb-02 03:22:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 03:22:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 03:22:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 03:22:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 03:22:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 03:22:57 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Feb-02 03:22:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 03:22:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 03:22:57 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Feb-02 03:22:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 03:22:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 03:22:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 03:22:57 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2012-Feb-02 03:22:57 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Feb-02 03:22:57 INFO2 astwait: Waiting for 7 seconds from 07:22:57 to 07:23:04 UTC ... 2012-Feb-02 03:22:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 03:22:57 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Feb-02 03:22:57 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Feb-02 03:23:04 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 INFO3 astwait: Finished waiting 2012-Feb-02 03:23:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 03:23:04 LOG5 dopset_later: Calling 'dopset_later 60.950105519661676' 2012-Feb-02 03:23:04 INFO3 dopset_later: Setting Doppler correction for 03:24:04 (61 seconds from now) 2012-Feb-02 03:23:04 LOG5 antvel: Calling 'antvel 129.730000 3.050002 F Heliocentric 60.950105519661676' 2012-Feb-02 03:23:04 LOG2 antvel: Transforming current Az = 129.73 ZA = 3.05 to apparent RA = 11:34:39.8 Dec = +20:17:11.8 2012-Feb-02 03:23:04 LOG2 antvel: Parameters to Doppler: Heliocentric 26644 2012 33 0.0 2012-Feb-02 03:23:04 INFO5 antvel: Computed antenna velocity: -16.03824 km/s 2012-Feb-02 03:23:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-16.0382435579 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Feb-02 03:23:04 INFO4 dopset_gen: New sky frequencies: 1381.317326 1381.317326 1381.317326 1381.317326 1381.317326 1381.317326 1381.317326 1381.317326 1381.317326 2012-Feb-02 03:23:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.317326 sky0=1381.317326 sky1=1381.317326 sky2=1381.317326 sky3=1381.317326 sky4=1381.317326 sky5=1381.317326 sky6=1381.317326 sky7=1381.317326 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Feb-02 03:23:04 LOG2 dopset_gen: Result from 'sky2syn': 1631.317326 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631317326.0} 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 03:23:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Feb-02 03:23:04 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Feb-02 03:23:04 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.9 Dec = +20:21:12.5 2012-Feb-02 03:23:04 LOG3 track_source: Calling 'track_source AGES1367_p1_060 113303.9 202112.5 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 03:23:04 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 03:23:04 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_060} INFO {Slewing to source 'AGES1367_p1_060' ...} 2012-Feb-02 03:23:04 INFO1 track_source: Starting to track AGES1367_p1_060 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_060" 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: set ra 113303.9 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: set dec 202112.5 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: pnt tr 113303.9 202112.5 -CJ 2012-Feb-02 03:23:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 03:23:04 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 03:23:04 LOG5 finish_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 03:23:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 03:23:04 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 START begin_task: Starting task 'waiting on telescope' 2012-Feb-02 03:23:04 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Feb-02 03:23:04 LOG3 waittrk: Start waittrk 5 2012-Feb-02 03:23:04 START begin_task: Starting task 'waiting on telescope movement' 2012-Feb-02 03:23:04 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631317326.0} 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_060" 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: set ra 113303.9 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: set dec 202112.5 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 113303.9 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 202112.5 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.9 202112.5 -CJ 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Feb-02 03:23:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Feb-02 03:23:09 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2012-Feb-02 03:23:09 START begin_task: Starting task 'waiting on telescope on source' 2012-Feb-02 03:23:09 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Feb-02 03:23:14 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Feb-02 03:23:14 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Feb-02 03:23:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Feb-02 03:23:14 INFO2 waittrk: Now tracking AGES1367_p1_060 2012-Feb-02 03:23:14 LOG4 waittrk: Current telescope position: Az = 489.06 ZA = 3.07 2012-Feb-02 03:23:14 STOP finish_task: Finishing task 'waiting on telescope' 2012-Feb-02 03:23:14 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-02 03:23:14 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Feb-02 03:23:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:14 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Feb-02 03:23:14 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Feb-02 03:23:14 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Feb-02 03:23:14 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-02 03:23:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Feb-02 03:23:14 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Feb-02 03:23:14 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Feb-02 03:23:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Feb-02 03:23:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 03:23:14 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Feb-02 03:23:14 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-02 03:23:14 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Feb-02 03:23:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 03:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:16 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 03:23:16 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Feb-02 03:23:16 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2012-Feb-02 03:23:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Feb-02 03:23:16 START begin_task: Starting task 'adjusting WAPP power' 2012-Feb-02 03:23:16 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-02 03:23:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 03:23:16 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 03:23:16 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 03:23:16 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 03:23:16 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Feb-02 03:23:16 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Feb-02 03:23:16 LOG5 begin_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-02 03:23:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Feb-02 03:23:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:16 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Feb-02 03:23:16 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2012-Feb-02 03:23:16 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 2 2 dB 2012-Feb-02 03:23:16 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 2 0 dB 2012-Feb-02 03:23:16 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Feb-02 03:23:16 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Feb-02 03:23:16 LOG5 end_task: Level: (5) ID = <10296> Status = 0 0 0 0 ok 2012-Feb-02 03:23:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.006 1.033 ALFA beam 1: 1.057 0.900 2012-Feb-02 03:23:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.082 1.101 ALFA beam 3: 0.970 1.021 2012-Feb-02 03:23:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.784 1.092 ALFA beam 5: 0.895 1.077 2012-Feb-02 03:23:16 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.000 0.014 ALFA beam 7: 1.086 0.014 2012-Feb-02 03:23:16 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Feb-02 03:23:16 LOG5 finish_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-02 03:23:16 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Feb-02 03:23:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:16 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Feb-02 03:23:16 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Feb-02 03:23:16 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Feb-02 03:23:16 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-02 03:23:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Feb-02 03:23:17 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Feb-02 03:23:17 LOG3 socket_wait: To MOCK: ADJP30 2012-Feb-02 03:23:17 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Feb-02 03:23:17 LOG5 begin_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-02 03:23:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Feb-02 03:23:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.033 1.057 0.900 2012-Feb-02 03:23:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.082 1.101 0.970 1.021 2012-Feb-02 03:23:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.092 0.895 1.077 2012-Feb-02 03:23:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.000 0.014 1.086 0.014 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b0s0g0 rms:A 34.0 29.9 B 29.9 30.0 mn:A 0.0 -0.1 B -0.2 -0.4 gn: 12 11 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.3 29.0 B 27.7 29.3 mn:A 0.0 -0.6 B -0.6 0.1 gn: 12 11 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b1s0g0 rms:A 32.5 30.5 B 32.8 28.4 mn:A 0.4 0.6 B 0.1 -0.0 gn: 8 11 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b1s1g0 rms:A 32.2 29.7 B 31.0 31.0 mn:A -0.4 -0.3 B 0.5 0.3 gn: 9 10 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b2s0g0 rms:A 31.4 30.4 B 30.3 31.7 mn:A -0.1 -0.3 B 0.4 0.1 gn: 11 12 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b2s1g0 rms:A 28.6 28.9 B 31.1 28.9 mn:A 0.3 -0.2 B 0.1 0.2 gn: 11 12 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b3s0g0 rms:A 31.3 31.1 B 33.5 29.9 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 13 13 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.1 28.5 B 28.4 29.5 mn:A -0.3 0.4 B 0.2 0.1 gn: 12 12 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.4 28.5 B 28.3 28.4 mn:A -0.3 -0.3 B -0.5 -0.0 gn: 13 11 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.4 28.4 B 30.5 29.4 mn:A 0.1 0.0 B -0.3 0.2 gn: 16 13 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.9 30.7 B 30.1 30.1 mn:A 0.7 0.6 B 0.0 0.6 gn: 13 11 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.6 28.4 B 30.4 30.1 mn:A -0.2 0.3 B -0.1 0.3 gn: 12 11 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b6s0g0 rms:A 30.9 28.3 B 14.1 14.5 mn:A -0.4 0.3 B 0.4 -0.3 gn: 13 31 2012-Feb-02 03:23:23 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.6 28.7 B 11.1 10.8 mn:A 0.7 0.5 B 0.1 0.2 gn: 14 31 2012-Feb-02 03:23:23 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Feb-02 03:23:23 LOG5 end_task: Level: (5) ID = <10298> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Feb-02 03:23:23 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Feb-02 03:23:23 LOG5 finish_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Feb-02 03:23:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:23 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Feb-02 03:23:23 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 03:23:23 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Feb-02 03:23:23 LOG5 finish_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Feb-02 03:23:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:23 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Feb-02 03:23:23 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 03:23:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 03:23:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 03:23:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Elliot Gonzalez 2012-Feb-02 03:23:23 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Feb-02 03:23:23 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Feb-02 03:23:23 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Feb-02 03:23:23 START begin_task: Starting task 'selecting calibration type' 2012-Feb-02 03:23:23 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Feb-02 03:23:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Feb-02 03:23:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 03:23:23 START begin_task: Starting task 'waiting on setcal' 2012-Feb-02 03:23:23 LOG5 begin_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Elliot Gonzalez' 2012-Feb-02 03:23:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Feb-02 03:23:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Feb-02 03:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:23 LOG4 got_cormsg: From DATATAKING: DONE 2012-Feb-02 03:23:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Feb-02 03:23:23 LOG5 end_task: Level: (5) ID = <10301> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Feb-02 03:23:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 03:23:23 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Feb-02 03:23:23 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 03:23:23 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:23 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 03:23:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 03:23:23 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Feb-02 03:23:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 03:23:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Feb-02 03:23:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Feb-02 03:23:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Feb-02 03:23:23 START begin_task: Starting task 'waiting on command to ALFA' 2012-Feb-02 03:23:23 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG4 got_alfamon: From ALFAMON: ACK 2012-Feb-02 03:23:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Feb-02 03:23:24 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Feb-02 03:23:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Feb-02 03:23:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Feb-02 03:23:24 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Feb-02 03:23:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Feb-02 03:23:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Feb-02 03:23:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 03:23:24 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 03:23:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Feb-02 03:23:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 03:23:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 03:23:24 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Feb-02 03:23:24 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 03:23:24 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Feb-02 03:23:24 LOG5 log_alfabeam: Parameters: 11.551083333333333 20.353472222222223 11.733045 2012.0907357657111 65.799934 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333336 20.353472222222226 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 1 11.553667883698713 20.258910275694941 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 2 11.558130925015718 20.321840637430736 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 3 11.555737789243084 20.417296989628870 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 4 11.548677912704170 20.449802713802509 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 5 11.543955236440690 20.382912798819799 2012-Feb-02 03:23:24 LOG4 log_alfabeam: ALFABEAM 6 11.546554055335436 20.287480752723756 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_060 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: patternid=203300076 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: scanid=203300077 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317326.0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317326.0 2012-Feb-02 03:23:24 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 03:23:24 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 03:23:24 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_060:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=203300076:scanid=203300077:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317326.0:topobfreqhz=1306317326.0:filetype=1 2012-Feb-02 03:23:24 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 03:23:24 LOG5 begin_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 03:23:24 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 03:23:24 LOG5 end_task: Level: (5) ID = <10306> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 03:23:24 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 03:23:24 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 03:23:24 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 03:23:24 LOG5 begin_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20120202.a2048.0005.fits 2012-Feb-02 03:23:24 LOG4 from_mock: From MOCK: starok 2012-Feb-02 03:23:24 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 03:23:24 LOG5 end_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 03:23:24 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300077 2012-Feb-02 03:23:24 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 03:23:24 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Feb-02 03:23:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120202.a2048.0005.fits} 2012-Feb-02 03:23:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 03:23:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Feb-02 03:23:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26605.00 2012-Feb-02 03:23:25 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 03:23:25 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 03:23:27 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 03:23:27 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 03:23:27 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:27 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:29 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:23:30.00 2012-Feb-02 03:23:30 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328167410.00 Thu Feb 2 03:23:30 2012 2012-Feb-02 03:23:30 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317326 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 03:23:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 03:23:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 03:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.561 (still bad) 2012-Feb-02 03:23:35 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 03:23:36 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 03:23:36 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 03:23:36 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 03:23:36 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Feb-02 03:23:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Feb-02 03:23:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Feb-02 03:23:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Feb-02 03:23:36 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG3 CALCONTROL-caltrig: Software trigger 2012-Feb-02 03:23:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Feb-02 03:23:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Feb-02 03:23:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Feb-02 03:23:36 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Feb-02 03:23:36 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 03:23:36 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Feb-02 03:23:36 LOG5 log_alfabeam: Parameters: 11.551083333333333 20.353472222222223 11.736388 2012.0907361459681 65.799934 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 0 11.551083333333338 20.353472222222223 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 1 11.553730802502221 20.259250341347506 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 2 11.558152536754832 20.322799966228043 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 3 11.555693575562879 20.417931165234613 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 4 11.548611566283531 20.449465240189255 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 5 11.543936054149809 20.381968109732874 2012-Feb-02 03:23:36 LOG4 log_alfabeam: ALFABEAM 6 11.546598258178573 20.286888635477304 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_060 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: patternid=203300076 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: scanid=203300078 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317326.0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317326.0 2012-Feb-02 03:23:36 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 03:23:36 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 03:23:36 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_060:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=203300076:scanid=203300078:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317326.0:topobfreqhz=1306317326.0:filetype=1 2012-Feb-02 03:23:36 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 03:23:36 LOG5 begin_task: Level: (5) ID = <10311> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 03:23:36 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 03:23:36 LOG5 end_task: Level: (5) ID = <10311> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 03:23:36 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 03:23:36 LOG3 socket_wait: To MOCK: STAR5 2012-Feb-02 03:23:36 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 03:23:36 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG4 from_mock: From MOCK: starok 2012-Feb-02 03:23:36 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 03:23:36 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 03:23:36 INFO2 take_data: Starting WAPP+Mock 5-second scan: 203300078 2012-Feb-02 03:23:36 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 03:23:36 LOG5 begin_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Feb-02 03:23:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 03:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.573 (still bad) 2012-Feb-02 03:23:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Feb-02 03:23:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26617.00 2012-Feb-02 03:23:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 03:23:37 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 03:23:39 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 03:23:39 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Feb-02 03:23:39 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:39 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Feb-02 03:23:42 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:23:42.01 2012-Feb-02 03:23:42 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328167422.01 Thu Feb 2 03:23:42 2012 2012-Feb-02 03:23:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317326 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 03:23:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 03:23:42 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Feb-02 03:23:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Feb-02 03:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.573 (still bad) 2012-Feb-02 03:23:47 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Feb-02 03:23:48 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Feb-02 03:23:48 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Feb-02 03:23:48 LOG5 end_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Feb-02 03:23:48 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Feb-02 03:23:48 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Feb-02 03:23:48 LOG5 finish_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Feb-02 03:23:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:48 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Feb-02 03:23:48 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Feb-02 03:23:48 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 129.73 and ZA = 3.05 2012-Feb-02 03:23:48 LOG3 track_source: Calling 'track_source AGES1367_p1_060 129.73 3.0500022980 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Feb-02 03:23:48 START begin_task: Starting task 'sending tracking commands' 2012-Feb-02 03:23:48 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_060} INFO {Slewing to source 'AGES1367_p1_060' ...} 2012-Feb-02 03:23:48 INFO1 track_source: Starting to track AGES1367_p1_060 2012-Feb-02 03:23:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_060" 2012-Feb-02 03:23:48 LOG3 vw_send: To DATATAKING: set ra 129.73 2012-Feb-02 03:23:48 LOG3 vw_send: To DATATAKING: set dec 3.0500022980 2012-Feb-02 03:23:48 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Feb-02 03:23:48 LOG3 vw_send: To DATATAKING: pnt tr 129.73 3.0500022980 -CF 2012-Feb-02 03:23:48 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 03:23:48 STOP finish_task: Finishing task 'sending tracking commands' 2012-Feb-02 03:23:48 LOG5 finish_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 INFO2 finish_task: DONE finished sending: tracking commands 2012-Feb-02 03:23:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Feb-02 03:23:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Feb-02 03:23:48 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 LOG1 fixed_driftmap: Parameters: HA = +00:10:00.1 Start = 11:44:40.0 LST = 11:44:23.0 diff = 17.0 secs 2012-Feb-02 03:23:48 INFO2 fixed_driftmap: Waiting 15 seconds for RA 11:34:40 2012-Feb-02 03:23:48 INFO2 lstwait: Waiting for 15 secs from LST 11:44:23 to LST 11:44:38 ... 2012-Feb-02 03:23:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.954435936305194 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Feb-02 03:23:48 START begin_task: Starting task 'waiting on wait on LST' 2012-Feb-02 03:23:48 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_060" 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: set ra 129.73 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: set dec 3.0500022980 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: vw% 129.73 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: vw% 3.0500022980 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: pnt tr 129.73 3.0500022980 -CF 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Feb-02 03:23:48 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Feb-02 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Feb-02 03:24:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Feb-02 03:24:03 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Feb-02 03:24:03 LOG4 lstwait: Finished waiting 1.05 seconds late 2012-Feb-02 03:24:03 INFO3 lstwait: Finished waiting 2012-Feb-02 03:24:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Feb-02 03:24:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Feb-02 03:24:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Feb-02 03:24:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Feb-02 03:24:03 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Feb-02 03:24:03 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Feb-02 03:24:03 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Feb-02 03:24:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Feb-02 03:24:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: obsnm=Elliot Gonzalez 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_060 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: patternid=203300079 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: scanid=203300079 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456317326.0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306317326.0 2012-Feb-02 03:24:03 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Feb-02 03:24:03 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Feb-02 03:24:03 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Elliot Gonzalez:object=AGES1367_p1_060:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=203300079:scanid=203300079:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456317326.0:topobfreqhz=1306317326.0:filetype=1 2012-Feb-02 03:24:03 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Feb-02 03:24:03 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2012-Feb-02 03:24:03 LOG4 from_mock: From MOCK: psetok 2012-Feb-02 03:24:03 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Feb-02 03:24:03 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2012-Feb-02 03:24:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Feb-02 03:24:03 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Feb-02 03:24:03 LOG3 socket_wait: To MOCK: STAR1200 2012-Feb-02 03:24:03 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Feb-02 03:24:03 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Feb-02 03:24:03 LOG4 from_mock: From MOCK: starok 2012-Feb-02 03:24:03 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Feb-02 03:24:03 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Feb-02 03:24:03 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Feb-02 03:24:03 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 203300079 2012-Feb-02 03:24:04 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Feb-02 03:24:04 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Feb-02 03:24:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Feb-02 03:24:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Feb-02 03:24:04 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Feb-02 03:24:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Feb-02 03:24:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26645.00 2012-Feb-02 03:24:05 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Feb-02 03:24:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2012-Feb-02 03:24:05 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:05 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.317326 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 904.071964 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1627.379976 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 1836.731236 MHz 2012-Feb-02 03:24:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.317326 MHz Flip = 1 Band = 0 Mixer = 2195.619112 MHz 2012-Feb-02 03:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Feb-02 03:24:08 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:24:08.01 2012-Feb-02 03:24:08 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1328167448.01 Thu Feb 2 03:24:08 2012 2012-Feb-02 03:24:08 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Feb-02 03:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.116 (still bad) 2012-Feb-02 03:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-02 03:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.117 (still bad) 2012-Feb-02 03:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Feb-02 03:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:24:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 03:24:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.032 1.056 0.896 2012-Feb-02 03:24:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.078 1.118 0.975 1.022 2012-Feb-02 03:24:20 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.087 0.873 1.042 2012-Feb-02 03:24:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.021 1.086 0.022 2012-Feb-02 03:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2012-Feb-02 03:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Feb-02 03:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 03:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 03:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 03:25:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.033 1.060 0.902 2012-Feb-02 03:25:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.117 0.975 1.021 2012-Feb-02 03:25:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.784 1.090 0.873 1.044 2012-Feb-02 03:25:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.999 0.021 1.084 0.022 2012-Feb-02 03:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.127 (still bad) 2012-Feb-02 03:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.126 (still bad) 2012-Feb-02 03:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Feb-02 03:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.118 (still bad) 2012-Feb-02 03:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Feb-02 03:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2012-Feb-02 03:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Feb-02 03:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:26:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:26:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.038 1.056 0.897 2012-Feb-02 03:26:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.117 0.975 1.020 2012-Feb-02 03:26:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.783 1.090 0.869 1.040 2012-Feb-02 03:26:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.020 1.088 0.021 2012-Feb-02 03:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2012-Feb-02 03:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-02 03:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2012-Feb-02 03:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Feb-02 03:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.115 (still bad) 2012-Feb-02 03:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-02 03:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Feb-02 03:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-02 03:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-02 03:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Feb-02 03:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-02 03:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-02 03:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Feb-02 03:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Feb-02 03:27:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Feb-02 03:27:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.030 1.057 0.898 2012-Feb-02 03:27:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.123 0.972 1.018 2012-Feb-02 03:27:24 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.085 0.872 1.040 2012-Feb-02 03:27:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.002 0.021 1.088 0.021 2012-Feb-02 03:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Feb-02 03:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:28:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:28:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.029 1.058 0.896 2012-Feb-02 03:28:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.076 1.118 0.973 1.020 2012-Feb-02 03:28:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.090 0.872 1.039 2012-Feb-02 03:28:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.004 0.020 1.089 0.020 2012-Feb-02 03:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Feb-02 03:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Feb-02 03:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Feb-02 03:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:29:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:29:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.033 1.058 0.898 2012-Feb-02 03:29:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.079 1.120 0.975 1.022 2012-Feb-02 03:29:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.782 1.090 0.873 1.042 2012-Feb-02 03:29:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.003 0.020 1.089 0.021 2012-Feb-02 03:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Feb-02 03:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Feb-02 03:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Feb-02 03:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 03:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Feb-02 03:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-02 03:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Feb-02 03:30:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Feb-02 03:30:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 1.039 1.063 0.902 2012-Feb-02 03:30:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.081 1.119 0.972 1.021 2012-Feb-02 03:30:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.785 1.095 0.878 1.045 2012-Feb-02 03:30:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.011 0.020 1.096 0.019 2012-Feb-02 03:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-02 03:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-02 03:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-02 03:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Feb-02 03:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.116 (still bad) 2012-Feb-02 03:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:30:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Feb-02 03:30:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:30:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:30:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:30:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:31:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:31:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Feb-02 03:31:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:31:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:31:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:31:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:31:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:31:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:31:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:31:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 1.035 1.068 0.909 2012-Feb-02 03:31:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.080 1.124 0.979 1.026 2012-Feb-02 03:31:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.780 1.088 0.871 1.037 2012-Feb-02 03:31:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.008 0.020 1.093 0.020 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:31:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:31:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:31:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:31:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:31:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Feb-02 03:32:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:32:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Feb-02 03:32:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-02 03:32:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-02 03:32:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:32:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Feb-02 03:32:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.033 1.056 0.898 2012-Feb-02 03:32:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.077 1.117 0.972 1.019 2012-Feb-02 03:32:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.779 1.085 0.872 1.040 2012-Feb-02 03:32:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.001 0.020 1.087 0.020 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Feb-02 03:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Feb-02 03:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Feb-02 03:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Feb-02 03:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-02 03:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Feb-02 03:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Feb-02 03:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Feb-02 03:33:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.131 (still bad) 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:33:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.132 (still bad) 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Feb-02 03:33:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.126 (still bad) 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Feb-02 03:33:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Feb-02 03:33:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Feb-02 03:33:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.113 (still bad) 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Feb-02 03:33:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2012-Feb-02 03:33:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)!