2012-Jan-09 02:31:43 BEGIN executive: CIMA executive starting ... 2012-Jan-09 02:31:43 NOTE executive: STARTING NEW CIMA SESSION 2012-Jan-09 02:31:43 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2012-Jan-09 02:31:43 INFO4 executive: This is an ON-LINE session 2012-Jan-09 02:31:43 INFO4 executive: This is a LOCAL session 2012-Jan-09 02:31:43 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2012-Jan-09 02:31:43 INFO1 executive: CIMA session for project 'a2048' in 'line' mode for 'Israel cabrera' 2012-Jan-09 02:31:43 INFO2 executive: Logging to '/share/obs4/usr/a2048/a2048.cimalog_20120109' 2012-Jan-09 02:31:44 LOG2 log_preferences: Currently applied preferences: 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(dailylog) = daily 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(offlinelog) = write 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(datawindow) = ignore 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(limitwarning) = enabled 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(wappfailure) = abort 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(helpstyle) = stay-open 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(logcolours) = full 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(displaylevel) = INFO3 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(loglevel) = LOG5 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(displayformat) = short 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(logformat) = new 2012-Jan-09 02:31:44 LOG2 log_preferences: prefs(fontsize) = 4 2012-Jan-09 02:31:44 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2012-Jan-09 02:31:44 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2048 2012-Jan-09 02:31:44 ALERT executive: CIMA executive ready 2012-Jan-09 02:31:45 NOTE frontend: CIMA frontend ready 2012-Jan-09 02:31:45 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:31:45 LOG4 got_cormsg: From DATATAKING: setup 2012-Jan-09 02:31:47 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2012-Jan-09 02:31:47 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2012-Jan-09 02:31:47 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Jan-09 02:31:47 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2012-Jan-09 02:31:47 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Jan-09 02:31:47 NOTE select_receiver: Starting to select receiver ALFA 2012-Jan-09 02:31:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Jan-09 02:31:47 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Jan-09 02:31:47 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Jan-09 02:31:47 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Jan-09 02:31:47 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Jan-09 02:31:47 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Jan-09 02:31:47 DONE finish_task: DONE finished selecting: receiver ALFA 2012-Jan-09 02:31:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 02:31:47 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Jan-09 02:31:47 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2012-Jan-09 02:31:51 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% io 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2012-Jan-09 02:31:51 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% connectall 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2048 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:31:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:31:58 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:31:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:39 INFO5 CIMA-read_in_command_file: Included command file 'command_galfacurpos_cima31.cmd' (at lines 77 - 93) 2012-Jan-09 02:32:39 INFO4 CIMA-load_command_file: Loaded command file '120109Morning.cmd' 2012-Jan-09 02:32:41 INFO1 CIMA-run_command_file: Transferring command file '120109Morning.cmd' to executive ... 2012-Jan-09 02:32:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 4 {LOAD ages_mock.conf} 2012-Jan-09 02:32:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 5 {SETUP FIXEDDRIFT calwhen=tracking calsecs=5} 2012-Jan-09 02:32:41 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 6 {CATALOG AGESFull.cat} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 9 {IF LSTSLEW(AGES3193_p3_130) < 085641 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 10 {FIXEDDRIFT az=258.18 alfaangle=-62.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_130 ra=95300.00 dec=203930.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {IF LSTSLEW(AGES3193_p3_132) < 092011 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 8 17 {FIXEDDRIFT az=253.11 alfaangle=-54.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_132 ra=95300.00 dec=203630.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 9 20 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 10 23 {IF LSTSLEW(AGES3193_p3_134) < 093811 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 11 24 {FIXEDDRIFT az=238.99 alfaangle=-37.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_134 ra=95300.00 dec=203330.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 12 27 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 13 30 {IF LSTSLEW(AGES3193_p3_136) < 100341 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 14 31 {FIXEDDRIFT az=132.01 alfaangle=63.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_136 ra=95300.00 dec=203030.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 15 34 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 16 37 {IF LSTSLEW(AGES3193_p3_138) < 103011 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 17 38 {FIXEDDRIFT az=104.84 alfaangle=-84.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_138 ra=95300.00 dec=202730.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 18 41 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 19 44 {IF LSTSLEW(AGES3193_p3_140) < 105641 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 20 45 {FIXEDDRIFT az=100.22 alfaangle=-76.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_140 ra=95300.00 dec=202430.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 21 48 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 22 51 {IF LSTSLEW(AGES1367_p1_047) < 112438 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 23 52 {FIXEDDRIFT az=225.81 alfaangle=-23.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_047 ra=113400.00 dec=204100.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 24 55 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 25 58 {IF LSTSLEW(AGES1367_p1_049) < 115038 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 26 59 {FIXEDDRIFT az=121.01 alfaangle=75.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_049 ra=113400.00 dec=203800.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 27 62 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 28 65 {IF LSTSLEW(AGES1367_p1_051) < 121408 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 29 66 {FIXEDDRIFT az=104.66 alfaangle=-84.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_051 ra=113400.00 dec=203500.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 30 69 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 31 72 {IF LSTSLEW(AGES1367_p1_053) < 123738 THEN} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 32 73 {FIXEDDRIFT az=100.66 alfaangle=-77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_053 ra=113400.00 dec=203200.00} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 33 76 {ENDIF} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 34 83 {LOAD togs_cima31.conf} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 35 84 {TRACKCURPOS} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 36 85 {ALFAANGLE 19} 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: store_command_file_line 37 89 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1375.80607910 1378.54045410 1378.73576660 1379.32170410 1380.49357910 1380.88420410 1381.86076660}} 2012-Jan-09 02:32:42 COMMAND CIMA-send_to_exec: Sending command to run command file 2012-Jan-09 02:32:42 LOG4 exec_msg: From OBSERVER: run_command_file 120109Morning.cmd 1 1 37 2012-Jan-09 02:32:42 LOG4 run_command_file: Calling 'run_command_file 120109Morning.cmd 1 1 37' 2012-Jan-09 02:32:42 BEGIN begin_task: Starting task 'running command file '120109Morning.cmd'' 2012-Jan-09 02:32:42 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2012-Jan-09 02:32:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file '120109Morning.cmd' ...} 2012-Jan-09 02:32:42 NOTE run_command_file: Starting execution of command file '120109Morning.cmd' from line 1 2012-Jan-09 02:32:42 COMMAND run_command_line: EXECUTING command 4: 'LOAD ages_mock.conf' 2012-Jan-09 02:32:42 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 02:32:43 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2012-Jan-09 02:32:43 NOTE CIMA-load_config_file: Loading configuration file 'ages_mock.conf' 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(new_catalog) /share/obs4/usr/a2048/AGESFull.cat 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1420.405751786" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2012-Jan-09 02:32:43 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+Mock" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1670.405752" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2012-Jan-09 02:32:44 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled1) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_enabled2) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards1) "both" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_boards2) "both" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode1) "spectra" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_mode2) "spectra" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg1) "2-pol" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_cfg2) "2-pol" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits1) "32" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bits2) "32" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor1) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_bwfactor2) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset1) "0.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_offset2) "0.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags1) "8192" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_lags2) "8192" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs1) "1000.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_millisecs2) "1000.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad1) "1" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_blank_ad2) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors1) "13" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_adc_errors2) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors1) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_pfb_errors2) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors1) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_acc_errors2) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors1) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_ashift_errors2) "0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype1) "fits" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(mock_filetype2) "fits" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(clock) "172032000" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth1) "175.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(synth2) "325.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(filesize) "2" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_source) "default" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_on) "0.02" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_off) "0.02" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(cal_phase) "100.0" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global mock ; set mock(debug_level) "normal" 2012-Jan-09 02:32:45 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 02:32:45 BEGIN begin_task: Starting task 'configuring IF/LO path' 2012-Jan-09 02:32:45 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Jan-09 02:32:45 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2012-Jan-09 02:32:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2012-Jan-09 02:32:45 INFO1 config_iflo: Selecting receiver ALFA 2012-Jan-09 02:32:45 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2012-Jan-09 02:32:45 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2012-Jan-09 02:32:45 START begin_task: Starting task 'selecting receiver ALFA' 2012-Jan-09 02:32:45 LOG5 begin_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 NOTE select_receiver: Starting to select receiver ALFA 2012-Jan-09 02:32:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2012-Jan-09 02:32:46 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2012-Jan-09 02:32:46 LOG3 vw_send: To DATATAKING: acvlbical off 2012-Jan-09 02:32:46 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2012-Jan-09 02:32:46 STOP finish_task: Finishing task 'selecting receiver ALFA' 2012-Jan-09 02:32:46 LOG5 finish_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 INFO2 finish_task: DONE finished selecting: receiver ALFA 2012-Jan-09 02:32:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:32:46 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2012-Jan-09 02:32:46 LOG5 end_task: Level: (3) ID = <10004> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 START begin_task: Starting task 'waiting for receiver ALFA' 2012-Jan-09 02:32:46 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2012-Jan-09 02:32:46 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 INFO1 config_iflo: Configuring rest of the IF/LO path 2012-Jan-09 02:32:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2012-Jan-09 02:32:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 02:32:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 02:32:46 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 02:32:46 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2012-Jan-09 02:32:46 LOG4 got_cormsg: From DATATAKING: acvlbical off 2012-Jan-09 02:32:46 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 02:32:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 02:32:46 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2012-Jan-09 02:32:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 02:32:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 02:32:46 LOG3 vw_send: To DATATAKING: alfafb 1 2012-Jan-09 02:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2012-Jan-09 02:32:46 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2012-Jan-09 02:32:46 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2012-Jan-09 02:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2012-Jan-09 02:32:46 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2012-Jan-09 02:32:47 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2012-Jan-09 02:32:47 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2012-Jan-09 02:32:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2012-Jan-09 02:32:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:32:47 START begin_task: Starting task 'waiting on configuring IF/LO path' 2012-Jan-09 02:32:47 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: alfafb 1 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1670405752.0} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2012-Jan-09 02:32:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:32:53 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:32:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:02 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 02:33:02 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2012-Jan-09 02:33:02 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2012-Jan-09 02:33:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2012-Jan-09 02:33:02 STOP finish_task: Finishing task 'configuring IF/LO path' 2012-Jan-09 02:33:02 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Jan-09 02:33:02 DONE finish_task: DONE finished configuration: IF/LO path 2012-Jan-09 02:33:02 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 02:33:02 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2012-Jan-09 02:33:02 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 BEGIN begin_task: Starting task 'configuring WAPPs' 2012-Jan-09 02:33:03 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2012-Jan-09 02:33:03 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2012-Jan-09 02:33:03 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Jan-09 02:33:03 START begin_task: Starting task 'selecting calibration port' 2012-Jan-09 02:33:03 LOG5 begin_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 vw_send: To DATATAKING: calport 3 2012-Jan-09 02:33:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Jan-09 02:33:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:33:03 START begin_task: Starting task 'waiting on calport' 2012-Jan-09 02:33:03 LOG5 begin_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:03 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Jan-09 02:33:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:03 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 02:33:03 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Jan-09 02:33:03 LOG5 end_task: Level: (4) ID = <10010> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Jan-09 02:33:03 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Jan-09 02:33:03 LOG5 end_task: Level: (3) ID = <10009> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 02:33:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 02:33:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 02:33:03 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 02:33:03 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 02:33:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 02:33:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 02:33:03 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Jan-09 02:33:03 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Jan-09 02:33:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 02:33:03 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 02:33:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 02:33:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 02:33:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 02:33:03 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 02:33:04 STOP finish_task: Finishing task 'configuring WAPPs' 2012-Jan-09 02:33:04 LOG5 finish_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2012-Jan-09 02:33:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 02:33:04 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2012-Jan-09 02:33:04 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 BEGIN begin_task: Starting task 'configuring the Mock spectrometer' 2012-Jan-09 02:33:04 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring Mock Spectrometer} TASKWAIT BITMAP stat_corr INFO {Configuring the Mock spectrometer ...} 2012-Jan-09 02:33:04 INFO1 config_mock: Starting to configure the Mock spectrometer 2012-Jan-09 02:33:04 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2012-Jan-09 02:33:04 START begin_task: Starting task 'selecting calibration port' 2012-Jan-09 02:33:04 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG3 vw_send: To DATATAKING: calport 3 2012-Jan-09 02:33:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2012-Jan-09 02:33:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:33:04 START begin_task: Starting task 'waiting on calport' 2012-Jan-09 02:33:04 LOG5 begin_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 02:33:04 LOG4 got_cormsg: From DATATAKING: calport 3 2012-Jan-09 02:33:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2012-Jan-09 02:33:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2012-Jan-09 02:33:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:33:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 02:33:04 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 02:33:04 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2012-Jan-09 02:33:04 LOG5 end_task: Level: (4) ID = <10015> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2012-Jan-09 02:33:04 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2012-Jan-09 02:33:04 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 02:33:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 02:33:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 02:33:04 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 02:33:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 02:33:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 02:33:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 02:33:04 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2012-Jan-09 02:33:04 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2012-Jan-09 02:33:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 02:33:04 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 02:33:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0000.fits 2012-Jan-09 02:33:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 02:33:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 02:33:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 02:33:04 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2012-Jan-09 02:33:04 LOG2 socket_wait: Starting sockwait on MOCK for 'check Mock spectrometer connection' using string 'nop' 2012-Jan-09 02:33:04 LOG3 socket_wait: To MOCK: NOP 2012-Jan-09 02:33:04 START begin_task: Starting task 'waiting on check Mock spectrometer connection' 2012-Jan-09 02:33:04 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20120109.a2048.0000.fits} 2012-Jan-09 02:33:05 ALERT got_mock_message: Mock spectrometer restarting 2012-Jan-09 02:33:05 LOG4 from_mock: From MOCK: nop ok 2012-Jan-09 02:33:05 STOP end_task: Finishing task 'waiting on check Mock spectrometer connection' with status 'OK' 2012-Jan-09 02:33:05 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'check Mock spectrometer connection' 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): CONFboxes=g0 0 1 2 3 4 5 6 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): datatype=AB 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bits=32 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): bwmhz=172.032 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevif1hz=250000000 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): digfreqoffhz=0.0 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fftlen=8192 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): dumptmsec=1.0 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): blankatod=1 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskadc=13 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskpfb=0 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskacc=0 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): emaskash=0 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): adcclkhz=172032000 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): pdevlohz=175000000 325000000 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): fileprefix=a2048 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): maxfilesizemb=2048 2012-Jan-09 02:33:05 LOG2 config_mock: Mock spectrometer configuration group 1 (0): calctl=c0 2012-Jan-09 02:33:05 LOG2 socket_wait: Starting sockwait on MOCK for 'configure Mock spectrometer group 1' using string 'conf' 2012-Jan-09 02:33:05 LOG3 socket_wait: To MOCK: CONFboxes=g0 0 1 2 3 4 5 6:datatype=AB:bits=32:bwmhz=172.032:pdevif1hz=250000000:digfreqoffhz=0.0:fftlen=8192:dumptmsec=1.0:blankatod=1:emaskadc=13:emaskpfb=0:emaskacc=0:emaskash=0:adcclkhz=172032000:pdevlohz=175000000 325000000:fileprefix=a2048:maxfilesizemb=2048:calctl=c0 2012-Jan-09 02:33:05 START begin_task: Starting task 'waiting on configure Mock spectrometer group 1' 2012-Jan-09 02:33:05 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 LOG4 from_mock: From MOCK: confok 2012-Jan-09 02:33:05 STOP end_task: Finishing task 'waiting on configure Mock spectrometer group 1' with status 'OK' 2012-Jan-09 02:33:05 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'configure Mock spectrometer group 1' 2012-Jan-09 02:33:05 LOG2 socket_wait: Starting sockwait on MOCK for 'disable Mock spectrometer group 2' using string 'conf' 2012-Jan-09 02:33:05 LOG3 socket_wait: To MOCK: CONFgrprem=g1 2012-Jan-09 02:33:05 START begin_task: Starting task 'waiting on disable Mock spectrometer group 2' 2012-Jan-09 02:33:05 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 LOG4 from_mock: From MOCK: confok 2012-Jan-09 02:33:05 STOP end_task: Finishing task 'waiting on disable Mock spectrometer group 2' with status 'OK' 2012-Jan-09 02:33:05 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 LOG3 socket_wait: DONE with sockwait on MOCK for 'disable Mock spectrometer group 2' 2012-Jan-09 02:33:05 STOP finish_task: Finishing task 'configuring the Mock spectrometer' 2012-Jan-09 02:33:05 LOG5 finish_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 DONE finish_task: DONE finished configuring: the Mock spectrometer 2012-Jan-09 02:33:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 02:33:05 END end_task: Finishing task 'configuring the Mock spectrometer' with status 'OK' 2012-Jan-09 02:33:05 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2012-Jan-09 02:33:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Jan-09 02:33:05 COMMAND run_command_line: EXECUTING command 5: 'SETUP FIXEDDRIFT calwhen=tracking calsecs=5' 2012-Jan-09 02:33:05 COMMAND run_command_line: EXECUTING command 6: 'CATALOG AGESFull.cat' 2012-Jan-09 02:33:05 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2048/AGESFull.cat' 2012-Jan-09 02:33:05 COMMAND run_command_line: EXECUTING command 9: 'IF LSTSLEW(AGES3193_p3_130) < 085641 THEN' 2012-Jan-09 02:33:06 LOG3 is_if_valid: Current source data: up 253.3 8.5 UP - - 117 6.0 2012-Jan-09 02:33:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_130) < 085641 2012-Jan-09 02:33:06 INFO5 is_if_valid: Condition parsed as: 9.4153849999999988 < 8.9447222222222216 2012-Jan-09 02:33:06 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES3193_p3_130) < 085641 THEN' 2012-Jan-09 02:33:06 COMMAND run_command_line: EXECUTING command 10: 'FIXEDDRIFT az=258.18 alfaangle=-62.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_130 ra=95300.00 dec=203930.00' 2012-Jan-09 02:33:06 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=258.18 alfaangle=-62.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_130 ra=95300.00 dec=203930.00' in non-true conditional branch 2012-Jan-09 02:33:06 COMMAND run_command_line: EXECUTING command 13: 'ENDIF' 2012-Jan-09 02:33:06 COMMAND run_command_line: EXECUTING command 16: 'IF LSTSLEW(AGES3193_p3_132) < 092011 THEN' 2012-Jan-09 02:33:06 LOG3 is_if_valid: Current source data: up 253.6 8.5 UP - - 117 6.0 2012-Jan-09 02:33:06 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_132) < 092011 2012-Jan-09 02:33:06 INFO5 is_if_valid: Condition parsed as: 9.4153849999999988 < 9.3363888888888891 2012-Jan-09 02:33:06 INFO1 is_if_valid: Skipping line 'IF LSTSLEW(AGES3193_p3_132) < 092011 THEN' 2012-Jan-09 02:33:06 COMMAND run_command_line: EXECUTING command 17: 'FIXEDDRIFT az=253.11 alfaangle=-54.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_132 ra=95300.00 dec=203630.00' 2012-Jan-09 02:33:06 INFO1 run_command_line: Skipping line 'FIXEDDRIFT az=253.11 alfaangle=-54.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_132 ra=95300.00 dec=203630.00' in non-true conditional branch 2012-Jan-09 02:33:06 COMMAND run_command_line: EXECUTING command 20: 'ENDIF' 2012-Jan-09 02:33:06 COMMAND run_command_line: EXECUTING command 23: 'IF LSTSLEW(AGES3193_p3_134) < 093811 THEN' 2012-Jan-09 02:33:07 LOG3 is_if_valid: Current source data: up 253.9 8.5 UP - - 117 6.0 2012-Jan-09 02:33:07 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_134) < 093811 2012-Jan-09 02:33:07 INFO5 is_if_valid: Condition parsed as: 9.4153849999999988 < 9.636388888888888 2012-Jan-09 02:33:07 COMMAND run_command_line: EXECUTING command 24: 'FIXEDDRIFT az=238.99 alfaangle=-37.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_134 ra=95300.00 dec=203330.00' 2012-Jan-09 02:33:07 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 02:33:08 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 02:33:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 238.99 -37.2 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_134 95300.00 203330.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 02:33:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 02:33:08 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Jan-09 02:33:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AUDSGAL2577' 2012-Jan-09 02:33:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 02:33:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_134} 2012-Jan-09 02:33:08 INFO3 fixed_driftmap: Sending telescope to Az = 238.99 and ZA = 4.24 2012-Jan-09 02:33:08 LOG3 track_source: Calling 'track_source AGES3193_p3_134 238.99 4.2384357517 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 02:33:08 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 02:33:08 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Jan-09 02:33:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_134} INFO {Slewing to source 'AGES3193_p3_134' ...} 2012-Jan-09 02:33:08 INFO1 track_source: Starting to track AGES3193_p3_134 2012-Jan-09 02:33:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_134" 2012-Jan-09 02:33:08 LOG3 vw_send: To DATATAKING: set ra 238.99 2012-Jan-09 02:33:08 LOG3 vw_send: To DATATAKING: set dec 4.2384357517 2012-Jan-09 02:33:08 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 02:33:08 LOG3 vw_send: To DATATAKING: pnt tr 238.99 4.2384357517 -CF 2012-Jan-09 02:33:08 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 02:33:08 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 02:33:08 LOG5 finish_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Jan-09 02:33:08 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 02:33:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:33:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 02:33:08 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2012-Jan-09 02:33:08 START begin_task: Starting task 'rotate ALFA to -37.2 degrees' 2012-Jan-09 02:33:08 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Jan-09 02:33:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -37.2 degrees ...} 2012-Jan-09 02:33:08 INFO2 rotate_alfa: ALFA commanded to -37.2 degrees 2012-Jan-09 02:33:08 LOG3 sock_errsend: To ALFAMOTOR: POSITION -37.2 REPLY 2012-Jan-09 02:33:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 02:33:08 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 02:33:08 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_134" 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: set ra 238.99 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: set dec 4.2384357517 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: vw% 238.99 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: vw% 4.2384357517 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: pnt tr 238.99 4.2384357517 -CF 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 02:33:08 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:34:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 02:34:20 INFO3 alfa_motor: ALFA rotator in-position -37.20 degrees 2012-Jan-09 02:34:20 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 02:34:20 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2012-Jan-09 02:34:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 02:34:20 STOP finish_task: Finishing task 'rotate ALFA to -37.2 degrees' 2012-Jan-09 02:34:20 LOG5 finish_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Jan-09 02:34:20 INFO2 finish_task: DONE finished configuration: rotating ALFA to -37.2 degrees 2012-Jan-09 02:34:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:34:20 STOP end_task: Finishing task 'rotate ALFA to -37.2 degrees' with status 'OK' 2012-Jan-09 02:34:20 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2012-Jan-09 02:34:20 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 02:34:20 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Jan-09 02:34:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 02:34:20 LOG3 waittrk: Start waittrk 5 2012-Jan-09 02:34:20 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 02:34:20 LOG5 begin_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2012-Jan-09 02:34:25 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 02:34:25 LOG5 end_task: Level: (4) ID = <10026> Status = 0 0 0 0 ok 2012-Jan-09 02:34:25 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 02:34:25 LOG5 begin_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 02:38:31 LOG5 end_task: Level: (4) ID = <10027> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 02:38:31 INFO2 waittrk: Now tracking AGES3193_p3_134 2012-Jan-09 02:38:31 LOG4 waittrk: Current telescope position: Az = 238.24 ZA = 4.24 2012-Jan-09 02:38:31 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 02:38:31 LOG5 finish_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 02:38:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:38:31 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 02:38:31 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 02:38:31 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 02:38:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 02:38:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:38:31 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 02:38:31 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 02:38:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:38:31 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 02:38:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 02:38:31 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 02:38:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 02:38:31 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 02:38:31 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 02:38:31 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2012-Jan-09 02:38:31 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:38:32 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 02:38:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 02:38:32 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2012-Jan-09 02:38:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 02:38:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 02:38:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 02:38:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 02:38:32 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 02:38:32 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Jan-09 02:38:32 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 02:38:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 02:38:32 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2012-Jan-09 02:38:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 02:38:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 02:38:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 02:38:32 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2012-Jan-09 02:38:32 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Jan-09 02:38:32 INFO2 astwait: Waiting for 766 seconds from 06:38:32 to 06:51:18 UTC ... 2012-Jan-09 02:38:32 LOG4 send_obs_status: To obs_status: <1> TASKTIME 766 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 02:38:32 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Jan-09 02:38:32 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Jan-09 02:51:18 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 INFO3 astwait: Finished waiting 2012-Jan-09 02:51:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 02:51:18 LOG5 dopset_later: Calling 'dopset_later 61.185404580134801' 2012-Jan-09 02:51:18 INFO3 dopset_later: Setting Doppler correction for 02:52:18 (61.2 seconds from now) 2012-Jan-09 02:51:18 LOG5 antvel: Calling 'antvel 238.990000 4.238436 F Heliocentric 61.185404580134801' 2012-Jan-09 02:51:18 LOG2 antvel: Transforming current Az = 238.99 ZA = 4.24 to apparent RA = 09:53:42.2 Dec = +20:29:50.0 2012-Jan-09 02:51:18 LOG2 antvel: Parameters to Doppler: Heliocentric 24738 2012 9 0.0 2012-Jan-09 02:51:18 INFO5 antvel: Computed antenna velocity: -17.35371 km/s 2012-Jan-09 02:51:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.3537134565 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 02:51:18 INFO4 dopset_gen: New sky frequencies: 1381.323388 1381.323388 1381.323388 1381.323388 1381.323388 1381.323388 1381.323388 1381.323388 1381.323388 2012-Jan-09 02:51:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.323388 sky0=1381.323388 sky1=1381.323388 sky2=1381.323388 sky3=1381.323388 sky4=1381.323388 sky5=1381.323388 sky6=1381.323388 sky7=1381.323388 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 02:51:18 LOG2 dopset_gen: Result from 'sky2syn': 1631.323388 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631323388.0} 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 02:51:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 02:51:18 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 02:51:18 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.8 Dec = +20:33:14.6 2012-Jan-09 02:51:18 LOG3 track_source: Calling 'track_source AGES3193_p3_134 095203.8 203314.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 02:51:18 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 02:51:18 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_134} INFO {Slewing to source 'AGES3193_p3_134' ...} 2012-Jan-09 02:51:18 INFO1 track_source: Starting to track AGES3193_p3_134 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_134" 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: set ra 095203.8 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: set dec 203314.6 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: pnt tr 095203.8 203314.6 -CJ 2012-Jan-09 02:51:18 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 02:51:18 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 02:51:18 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 02:51:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:51:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 02:51:18 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 02:51:18 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 02:51:18 LOG3 waittrk: Start waittrk 5 2012-Jan-09 02:51:18 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 02:51:18 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631323388.0} 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_134" 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: set ra 095203.8 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: set dec 203314.6 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.8 203314.6 -CJ 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: 095203.8 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: vw% 203314.6 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 02:51:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:51:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 02:51:23 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2012-Jan-09 02:51:23 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 02:51:23 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2012-Jan-09 02:51:30 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 02:51:30 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2012-Jan-09 02:51:30 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 02:51:30 INFO2 waittrk: Now tracking AGES3193_p3_134 2012-Jan-09 02:51:30 LOG4 waittrk: Current telescope position: Az = 238.04 ZA = 4.21 2012-Jan-09 02:51:30 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 02:51:30 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Jan-09 02:51:30 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 02:51:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:51:30 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 02:51:30 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2012-Jan-09 02:51:30 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 02:51:30 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Jan-09 02:51:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 02:51:30 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 02:51:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 02:51:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 02:51:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:51:31 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 02:51:31 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2012-Jan-09 02:51:31 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 02:51:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:51:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:51:32 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 02:51:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 02:51:32 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2012-Jan-09 02:51:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 02:51:32 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 02:51:32 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Jan-09 02:51:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 02:51:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 02:51:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 02:51:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 02:51:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 02:51:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 02:51:33 LOG5 begin_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2012-Jan-09 02:51:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:51:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 02:51:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Jan-09 02:51:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2012-Jan-09 02:51:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Jan-09 02:51:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Jan-09 02:51:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 02:51:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 02:51:33 LOG5 end_task: Level: (5) ID = <10040> Status = 0 0 0 0 ok 2012-Jan-09 02:51:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.046 1.063 ALFA beam 1: 1.136 0.910 2012-Jan-09 02:51:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.913 0.955 ALFA beam 3: 1.042 1.093 2012-Jan-09 02:51:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.821 0.993 ALFA beam 5: 0.909 1.082 2012-Jan-09 02:51:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.089 0.014 ALFA beam 7: 0.947 0.014 2012-Jan-09 02:51:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 02:51:33 LOG5 finish_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Jan-09 02:51:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 02:51:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:51:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 02:51:33 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2012-Jan-09 02:51:33 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 02:51:33 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Jan-09 02:51:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 02:51:33 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 02:51:33 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 02:51:33 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 02:51:33 LOG5 begin_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2012-Jan-09 02:51:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 02:51:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.046 1.063 1.136 0.910 2012-Jan-09 02:51:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.955 1.042 1.093 2012-Jan-09 02:51:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 0.993 0.909 1.082 2012-Jan-09 02:51:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.089 0.014 0.947 0.014 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.9 27.2 B 30.1 30.2 mn:A 0.1 -0.2 B -0.4 -0.4 gn: 11 11 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.2 30.8 B 28.5 30.2 mn:A 0.1 -0.4 B -0.6 0.0 gn: 12 11 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.4 28.5 B 32.9 28.7 mn:A 0.5 0.7 B 0.1 0.0 gn: 7 11 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.5 28.1 B 31.4 31.4 mn:A -0.3 -0.2 B 0.4 0.3 gn: 8 10 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.4 31.4 B 27.9 29.2 mn:A -0.1 -0.4 B 0.3 0.0 gn: 11 11 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.4 30.7 B 32.5 30.2 mn:A 0.2 -0.3 B 0.1 0.2 gn: 11 12 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.9 28.6 B 31.0 27.6 mn:A 0.4 -0.3 B -0.1 -0.3 gn: 12 12 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.6 29.9 B 29.4 30.6 mn:A -0.2 0.3 B 0.1 0.1 gn: 12 12 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.2 29.3 B 29.9 30.1 mn:A -0.3 -0.3 B -0.3 -0.0 gn: 13 12 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.5 29.4 B 32.2 31.1 mn:A -0.1 0.0 B -0.3 0.2 gn: 16 14 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b5s0g0 rms:A 32.3 31.1 B 30.3 30.3 mn:A 0.6 0.5 B 0.0 0.5 gn: 13 11 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.4 29.1 B 31.0 30.7 mn:A -0.3 0.2 B -0.0 0.1 gn: 12 11 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.4 29.7 B 15.3 15.8 mn:A -0.4 0.2 B 0.4 -0.3 gn: 13 31 2012-Jan-09 02:51:39 INFO3 from_mock: From MOCK: b6s1g0 rms:A 34.1 31.0 B 12.4 12.0 mn:A 0.7 0.5 B -0.0 0.2 gn: 14 31 2012-Jan-09 02:51:39 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 02:51:39 LOG5 end_task: Level: (5) ID = <10042> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 02:51:39 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 02:51:39 LOG5 finish_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 02:51:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:51:39 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 02:51:39 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 02:51:39 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 02:51:39 LOG5 finish_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 02:51:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:51:39 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 02:51:39 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 02:51:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 02:51:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 02:51:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 02:51:39 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20120109.a2048.0000.fits' is empty! 2012-Jan-09 02:51:39 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 02:51:39 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 02:51:39 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 02:51:39 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 02:51:39 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 02:51:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 02:51:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:51:39 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 02:51:39 LOG5 begin_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2012-Jan-09 02:51:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 02:51:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 02:51:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 02:51:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:51:40 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (5) ID = <10045> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 02:51:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 02:51:40 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 02:51:40 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 02:51:40 LOG5 begin_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:51:40 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (5) ID = <10046> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 02:51:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 02:51:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 02:51:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 02:51:40 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 02:51:40 LOG5 begin_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (5) ID = <10047> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 02:51:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 02:51:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 02:51:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 02:51:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 02:51:40 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 02:51:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 02:51:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 02:51:40 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 02:51:40 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 02:51:40 LOG5 log_alfabeam: Parameters: 9.8677222222222234 20.554055555555557 9.625955 2012.0249670443886 -37.200073 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 0 9.867722222222215 20.554055555555568 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 1 9.868128398615285 20.460750185967953 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 2 9.874302173921938 20.522445279450118 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 3 9.873805672029366 20.617588839964938 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 4 9.867151068576135 20.647941874823701 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 5 9.861142473479704 20.583029192064199 2012-Jan-09 02:51:40 LOG4 log_alfabeam: ALFABEAM 6 9.861621028903771 20.490959492436740 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_134 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: patternid=200900098 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: scanid=200900098 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323388.0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323388.0 2012-Jan-09 02:51:40 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 02:51:40 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 02:51:40 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_134:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900098:scanid=200900098:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323388.0:topobfreqhz=1306323388.0:filetype=1 2012-Jan-09 02:51:40 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 02:51:40 LOG5 begin_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (5) ID = <10050> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 02:51:40 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 02:51:40 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 02:51:40 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 02:51:40 LOG5 begin_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG4 from_mock: From MOCK: starok 2012-Jan-09 02:51:40 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 02:51:40 LOG5 end_task: Level: (5) ID = <10051> Status = 0 0 0 0 ok 2012-Jan-09 02:51:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 02:51:40 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900098 2012-Jan-09 02:51:41 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 02:51:41 LOG5 begin_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2012-Jan-09 02:51:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 02:51:41 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 02:51:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 02:51:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 02:51:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24702.00 2012-Jan-09 02:51:43 INFO2 got_mock_message: Mock spectrometer start file number is 00000 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 02:51:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 02:51:43 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:43 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:46 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:51:46.01 2012-Jan-09 02:51:46 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326091906.01 Mon Jan 9 02:51:46 2012 2012-Jan-09 02:51:46 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323388 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 02:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.136 (still bad) 2012-Jan-09 02:51:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 02:51:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 02:51:52 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 02:51:52 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 02:51:52 LOG5 end_task: Level: (5) ID = <10052> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 02:51:52 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 02:51:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 02:51:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 02:51:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 02:51:52 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 02:51:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 02:51:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 02:51:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 02:51:52 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 02:51:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 02:51:52 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 02:51:52 LOG5 log_alfabeam: Parameters: 9.8677222222222234 20.554055555555557 9.629019 2012.0249673929575 -37.200073 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 0 9.867722222222216 20.554055555555568 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 1 9.868164338921492 20.460785856364303 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 2 9.874314520212915 20.522944707976873 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 3 9.873780481485639 20.618062120839301 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 4 9.867113374134519 20.647898513089224 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 5 9.861131216202788 20.582506569028265 2012-Jan-09 02:51:52 LOG4 log_alfabeam: ALFABEAM 6 9.861645838597905 20.490489183607899 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_134 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: patternid=200900098 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: scanid=200900099 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323388.0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323388.0 2012-Jan-09 02:51:52 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 02:51:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 02:51:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_134:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900098:scanid=200900099:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323388.0:topobfreqhz=1306323388.0:filetype=1 2012-Jan-09 02:51:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 02:51:52 LOG5 begin_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 02:51:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 02:51:52 LOG5 end_task: Level: (5) ID = <10055> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 02:51:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 02:51:52 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 02:51:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 02:51:52 LOG5 begin_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG4 from_mock: From MOCK: starok 2012-Jan-09 02:51:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 02:51:52 LOG5 end_task: Level: (5) ID = <10056> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 02:51:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900099 2012-Jan-09 02:51:52 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 02:51:52 LOG5 begin_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2012-Jan-09 02:51:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 02:51:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 02:51:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24713.00 2012-Jan-09 02:51:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 02:51:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.554 (still bad) 2012-Jan-09 02:51:55 INFO2 got_mock_message: Mock spectrometer start file number is 00100 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 02:51:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 02:51:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 02:51:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:51:58.02 2012-Jan-09 02:51:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326091918.02 Mon Jan 9 02:51:58 2012 2012-Jan-09 02:51:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323388 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 02:51:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:51:58 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 02:51:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2012-Jan-09 02:52:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 02:52:04 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 02:52:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 02:52:04 LOG5 end_task: Level: (5) ID = <10057> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 02:52:04 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 02:52:04 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 02:52:04 LOG5 finish_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 02:52:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:52:04 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 02:52:04 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 02:52:04 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 238.99 and ZA = 4.24 2012-Jan-09 02:52:04 LOG3 track_source: Calling 'track_source AGES3193_p3_134 238.99 4.2384357517 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 02:52:04 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 02:52:04 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_134} INFO {Slewing to source 'AGES3193_p3_134' ...} 2012-Jan-09 02:52:04 INFO1 track_source: Starting to track AGES3193_p3_134 2012-Jan-09 02:52:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_134" 2012-Jan-09 02:52:04 LOG3 vw_send: To DATATAKING: set ra 238.99 2012-Jan-09 02:52:04 LOG3 vw_send: To DATATAKING: set dec 4.2384357517 2012-Jan-09 02:52:04 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 02:52:04 LOG3 vw_send: To DATATAKING: pnt tr 238.99 4.2384357517 -CF 2012-Jan-09 02:52:04 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 02:52:04 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 02:52:04 LOG5 finish_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 02:52:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 02:52:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 02:52:04 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 LOG1 fixed_driftmap: Parameters: HA = -00:15:30.6 Start = 09:38:11.7 LST = 09:37:56.5 diff = 15.2 secs 2012-Jan-09 02:52:04 INFO2 fixed_driftmap: Waiting 13.2 seconds for RA 9:53:42 2012-Jan-09 02:52:04 INFO2 lstwait: Waiting for 13.2 secs from LST 09:37:56 to LST 09:38:10 ... 2012-Jan-09 02:52:04 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.190009994856215 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 02:52:04 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 02:52:04 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_134" 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: set ra 238.99 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: set dec 4.2384357517 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: vw% 238.99 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: vw% 4.2384357517 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: pnt tr 238.99 4.2384357517 -CF 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 02:52:04 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 02:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2012-Jan-09 02:52:17 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 02:52:17 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2012-Jan-09 02:52:17 LOG4 lstwait: Finished waiting 0.81 seconds late 2012-Jan-09 02:52:17 INFO3 lstwait: Finished waiting 2012-Jan-09 02:52:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 02:52:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 02:52:17 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 02:52:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 02:52:17 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 02:52:17 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 02:52:17 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Jan-09 02:52:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 02:52:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_134 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: patternid=200900100 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: scanid=200900100 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323388.0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323388.0 2012-Jan-09 02:52:17 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 02:52:17 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 02:52:17 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_134:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900100:scanid=200900100:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323388.0:topobfreqhz=1306323388.0:filetype=1 2012-Jan-09 02:52:17 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 02:52:17 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Jan-09 02:52:17 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 02:52:17 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 02:52:17 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2012-Jan-09 02:52:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 02:52:17 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 02:52:17 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 02:52:17 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 02:52:17 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2012-Jan-09 02:52:17 LOG4 from_mock: From MOCK: starok 2012-Jan-09 02:52:17 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 02:52:18 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2012-Jan-09 02:52:18 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 02:52:18 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900100 2012-Jan-09 02:52:18 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 02:52:18 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Jan-09 02:52:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 02:52:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 02:52:18 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 02:52:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 02:52:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24739.00 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323388 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 02:52:20 INFO2 got_mock_message: Mock spectrometer start file number is 00200 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 02:52:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Jan-09 02:52:20 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 02:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323388 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 02:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2012-Jan-09 02:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.142 (still bad) 2012-Jan-09 02:52:23 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 02:52:23.02 2012-Jan-09 02:52:23 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326091943.02 Mon Jan 9 02:52:23 2012 2012-Jan-09 02:52:23 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 02:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.139 (still bad) 2012-Jan-09 02:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.140 (still bad) 2012-Jan-09 02:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 02:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:52:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:52:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.056 1.139 0.910 2012-Jan-09 02:52:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.955 1.036 1.094 2012-Jan-09 02:52:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.990 0.911 1.078 2012-Jan-09 02:52:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.027 0.956 0.027 2012-Jan-09 02:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2012-Jan-09 02:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Jan-09 02:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 02:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Jan-09 02:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 02:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2012-Jan-09 02:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.145 (still bad) 2012-Jan-09 02:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.140 (still bad) 2012-Jan-09 02:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.142 (still bad) 2012-Jan-09 02:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.143 (still bad) 2012-Jan-09 02:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.141 (still bad) 2012-Jan-09 02:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2012-Jan-09 02:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2012-Jan-09 02:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2012-Jan-09 02:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.138 (still bad) 2012-Jan-09 02:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2012-Jan-09 02:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2012-Jan-09 02:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2012-Jan-09 02:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 02:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 02:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 02:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 02:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 02:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 02:53:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:53:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 1.065 1.144 0.911 2012-Jan-09 02:53:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.958 1.038 1.096 2012-Jan-09 02:53:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.824 0.996 0.919 1.092 2012-Jan-09 02:53:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.027 0.952 0.027 2012-Jan-09 02:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 02:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 02:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:54:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:54:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.057 1.144 0.910 2012-Jan-09 02:54:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.962 1.043 1.099 2012-Jan-09 02:54:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 0.998 0.913 1.085 2012-Jan-09 02:54:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.027 0.956 0.027 2012-Jan-09 02:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 02:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 02:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 02:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 02:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 02:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 02:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2012-Jan-09 02:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2012-Jan-09 02:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2012-Jan-09 02:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2012-Jan-09 02:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2012-Jan-09 02:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2012-Jan-09 02:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 02:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:55:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.055 1.144 0.911 2012-Jan-09 02:55:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.962 1.042 1.101 2012-Jan-09 02:55:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 0.997 0.914 1.087 2012-Jan-09 02:55:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.027 0.956 0.027 2012-Jan-09 02:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 02:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:56:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:56:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.056 1.144 0.909 2012-Jan-09 02:56:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.955 1.039 1.093 2012-Jan-09 02:56:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.994 0.908 1.080 2012-Jan-09 02:56:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.027 0.952 0.027 2012-Jan-09 02:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 02:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 02:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 02:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 02:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 02:57:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:57:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.055 1.144 0.910 2012-Jan-09 02:57:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.954 1.040 1.093 2012-Jan-09 02:57:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.994 0.909 1.079 2012-Jan-09 02:57:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.027 0.953 0.027 2012-Jan-09 02:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 02:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 02:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 02:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 02:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 02:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 02:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 02:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 02:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 02:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.148 (still bad) 2012-Jan-09 02:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.143 (still bad) 2012-Jan-09 02:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2012-Jan-09 02:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.146 (still bad) 2012-Jan-09 02:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2012-Jan-09 02:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2012-Jan-09 02:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.148 (still bad) 2012-Jan-09 02:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:58:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:58:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.059 1.145 0.910 2012-Jan-09 02:58:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.912 0.955 1.039 1.095 2012-Jan-09 02:58:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.994 0.909 1.079 2012-Jan-09 02:58:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.027 0.952 0.027 2012-Jan-09 02:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 02:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 02:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 02:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 02:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 02:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 02:59:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 02:59:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.060 1.144 0.911 2012-Jan-09 02:59:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.956 1.042 1.097 2012-Jan-09 02:59:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.993 0.909 1.079 2012-Jan-09 02:59:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.027 0.953 0.027 2012-Jan-09 02:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 02:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.157 (still bad) 2012-Jan-09 02:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 02:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 03:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.154 (still bad) 2012-Jan-09 03:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 03:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:00:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:00:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.059 1.143 0.910 2012-Jan-09 03:00:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.956 1.041 1.095 2012-Jan-09 03:00:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.994 0.911 1.081 2012-Jan-09 03:00:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.027 0.955 0.027 2012-Jan-09 03:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:01:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:01:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.059 1.147 0.914 2012-Jan-09 03:01:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.952 1.041 1.095 2012-Jan-09 03:01:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.992 0.908 1.077 2012-Jan-09 03:01:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.027 0.952 0.027 2012-Jan-09 03:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 03:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.156 (still bad) 2012-Jan-09 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:02:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:02:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.057 1.141 0.909 2012-Jan-09 03:02:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.960 1.043 1.094 2012-Jan-09 03:02:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.996 0.907 1.079 2012-Jan-09 03:02:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.027 0.956 0.027 2012-Jan-09 03:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 03:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 03:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 03:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.165 (still bad) 2012-Jan-09 03:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.185 (still bad) 2012-Jan-09 03:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.205 (still bad) 2012-Jan-09 03:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.217 (still bad) 2012-Jan-09 03:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.227 (still bad) 2012-Jan-09 03:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.225 (still bad) 2012-Jan-09 03:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.219 (still bad) 2012-Jan-09 03:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.208 (still bad) 2012-Jan-09 03:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.189 (still bad) 2012-Jan-09 03:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.173 (still bad) 2012-Jan-09 03:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.161 (still bad) 2012-Jan-09 03:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:03:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:03:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.059 1.146 0.912 2012-Jan-09 03:03:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.952 1.040 1.095 2012-Jan-09 03:03:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 0.991 0.911 1.082 2012-Jan-09 03:03:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.133 0.027 0.985 0.027 2012-Jan-09 03:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.155 (still bad) 2012-Jan-09 03:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.172 (still bad) 2012-Jan-09 03:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.191 (still bad) 2012-Jan-09 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.203 (still bad) 2012-Jan-09 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.204 (still bad) 2012-Jan-09 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.202 (still bad) 2012-Jan-09 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.189 (still bad) 2012-Jan-09 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.167 (still bad) 2012-Jan-09 03:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2012-Jan-09 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2012-Jan-09 03:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.141 (still bad) 2012-Jan-09 03:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2012-Jan-09 03:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2012-Jan-09 03:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2012-Jan-09 03:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2012-Jan-09 03:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2012-Jan-09 03:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2012-Jan-09 03:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 03:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 03:04:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:04:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.059 1.143 0.911 2012-Jan-09 03:04:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.956 1.045 1.098 2012-Jan-09 03:04:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.993 0.913 1.084 2012-Jan-09 03:04:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.027 0.957 0.027 2012-Jan-09 03:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:05:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:05:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.056 1.068 1.147 0.913 2012-Jan-09 03:05:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.956 1.046 1.096 2012-Jan-09 03:05:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.995 0.915 1.085 2012-Jan-09 03:05:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.027 0.955 0.027 2012-Jan-09 03:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2012-Jan-09 03:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2012-Jan-09 03:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.141 (still bad) 2012-Jan-09 03:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.146 (still bad) 2012-Jan-09 03:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.145 (still bad) 2012-Jan-09 03:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2012-Jan-09 03:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.144 (still bad) 2012-Jan-09 03:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:06:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:06:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.093 1.152 0.919 2012-Jan-09 03:06:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.960 1.051 1.104 2012-Jan-09 03:06:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 1.000 0.919 1.088 2012-Jan-09 03:06:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.027 0.959 0.027 2012-Jan-09 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.155 (still bad) 2012-Jan-09 03:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.157 (still bad) 2012-Jan-09 03:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.158 (still bad) 2012-Jan-09 03:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.157 (still bad) 2012-Jan-09 03:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.155 (still bad) 2012-Jan-09 03:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 03:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:07:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:07:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.060 1.145 0.913 2012-Jan-09 03:07:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.953 1.045 1.097 2012-Jan-09 03:07:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 0.994 0.911 1.081 2012-Jan-09 03:07:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.027 0.958 0.027 2012-Jan-09 03:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 03:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:08:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:08:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.059 1.144 0.911 2012-Jan-09 03:08:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.952 1.043 1.095 2012-Jan-09 03:08:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.993 0.911 1.082 2012-Jan-09 03:08:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.027 0.953 0.027 2012-Jan-09 03:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.148 (still bad) 2012-Jan-09 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.147 (still bad) 2012-Jan-09 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2012-Jan-09 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.148 (still bad) 2012-Jan-09 03:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.145 (still bad) 2012-Jan-09 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.146 (still bad) 2012-Jan-09 03:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.148 (still bad) 2012-Jan-09 03:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2012-Jan-09 03:09:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 03:09:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.059 1.147 0.913 2012-Jan-09 03:09:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.953 1.045 1.096 2012-Jan-09 03:09:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.990 0.913 1.082 2012-Jan-09 03:09:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.025 0.952 0.025 2012-Jan-09 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.149 (still bad) 2012-Jan-09 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2012-Jan-09 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2012-Jan-09 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.149 (still bad) 2012-Jan-09 03:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 03:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 03:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:11:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:11:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.063 1.152 0.920 2012-Jan-09 03:11:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.954 1.045 1.095 2012-Jan-09 03:11:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.992 0.915 1.084 2012-Jan-09 03:11:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.027 0.955 0.027 2012-Jan-09 03:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 03:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.161 (still bad) 2012-Jan-09 03:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.173 (still bad) 2012-Jan-09 03:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.174 (still bad) 2012-Jan-09 03:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.175 (still bad) 2012-Jan-09 03:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.178 (still bad) 2012-Jan-09 03:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.172 (still bad) 2012-Jan-09 03:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.169 (still bad) 2012-Jan-09 03:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.167 (still bad) 2012-Jan-09 03:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.156 (still bad) 2012-Jan-09 03:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.149 (still bad) 2012-Jan-09 03:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 03:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 03:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.153 (still bad) 2012-Jan-09 03:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 03:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 03:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:12:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:12:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.063 1.146 0.914 2012-Jan-09 03:12:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.956 1.048 1.099 2012-Jan-09 03:12:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.995 0.916 1.084 2012-Jan-09 03:12:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.027 0.958 0.027 2012-Jan-09 03:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 03:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 03:12:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 03:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:12:24 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 03:12:24 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 03:12:24 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 03:12:24 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2012-Jan-09 03:12:24 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 03:12:24 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2012-Jan-09 03:12:24 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 03:12:24 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Jan-09 03:12:24 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 03:12:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 03:12:24 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 03:12:24 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2012-Jan-09 03:12:24 COMMAND run_command_line: EXECUTING command 27: 'ENDIF' 2012-Jan-09 03:12:24 COMMAND run_command_line: EXECUTING command 30: 'IF LSTSLEW(AGES3193_p3_136) < 100341 THEN' 2012-Jan-09 03:12:24 LOG3 is_if_valid: Current source data: up 152.5 2.4 UP - - 78 3.6 2012-Jan-09 03:12:24 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_136) < 100341 2012-Jan-09 03:12:24 INFO5 is_if_valid: Condition parsed as: 10.032178 < 10.061388888888889 2012-Jan-09 03:12:24 COMMAND run_command_line: EXECUTING command 31: 'FIXEDDRIFT az=132.01 alfaangle=63.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_136 ra=95300.00 dec=203030.00' 2012-Jan-09 03:12:24 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 03:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 03:12:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 03:12:25 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 132.01 63.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_136 95300.00 203030.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:12:25 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 03:12:25 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2012-Jan-09 03:12:25 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_134' 2012-Jan-09 03:12:25 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 03:12:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_136} 2012-Jan-09 03:12:25 INFO3 fixed_driftmap: Sending telescope to Az = 132.01 and ZA = 3.15 2012-Jan-09 03:12:25 LOG3 track_source: Calling 'track_source AGES3193_p3_136 132.01 3.1528837236 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:12:25 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 03:12:25 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Jan-09 03:12:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_136} INFO {Slewing to source 'AGES3193_p3_136' ...} 2012-Jan-09 03:12:25 INFO1 track_source: Starting to track AGES3193_p3_136 2012-Jan-09 03:12:25 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_136" 2012-Jan-09 03:12:25 LOG3 vw_send: To DATATAKING: set ra 132.01 2012-Jan-09 03:12:25 LOG3 vw_send: To DATATAKING: set dec 3.1528837236 2012-Jan-09 03:12:25 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 03:12:25 LOG3 vw_send: To DATATAKING: pnt tr 132.01 3.1528837236 -CF 2012-Jan-09 03:12:25 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:12:25 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 03:12:25 LOG5 finish_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Jan-09 03:12:25 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 03:12:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:12:25 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 03:12:25 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2012-Jan-09 03:12:25 START begin_task: Starting task 'rotate ALFA to +63.6 degrees' 2012-Jan-09 03:12:25 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Jan-09 03:12:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +63.6 degrees ...} 2012-Jan-09 03:12:25 INFO2 rotate_alfa: ALFA commanded to +63.6 degrees 2012-Jan-09 03:12:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 63.6 REPLY 2012-Jan-09 03:12:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 03:12:25 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 03:12:25 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_136" 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: set ra 132.01 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: set dec 3.1528837236 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% 132.01 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% 3.1528837236 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: pnt tr 132.01 3.1528837236 -CF 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:13:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 03:13:21 INFO3 alfa_motor: ALFA rotator in-position +63.60 degrees 2012-Jan-09 03:13:21 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 03:13:21 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2012-Jan-09 03:13:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:13:22 STOP finish_task: Finishing task 'rotate ALFA to +63.6 degrees' 2012-Jan-09 03:13:22 LOG5 finish_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Jan-09 03:13:22 INFO2 finish_task: DONE finished configuration: rotating ALFA to +63.6 degrees 2012-Jan-09 03:13:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:13:22 STOP end_task: Finishing task 'rotate ALFA to +63.6 degrees' with status 'OK' 2012-Jan-09 03:13:22 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2012-Jan-09 03:13:22 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 03:13:22 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Jan-09 03:13:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 03:13:22 LOG3 waittrk: Start waittrk 5 2012-Jan-09 03:13:22 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 03:13:22 LOG5 begin_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Jan-09 03:13:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 03:13:27 LOG5 end_task: Level: (4) ID = <10069> Status = 0 0 0 0 ok 2012-Jan-09 03:13:27 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 03:13:27 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2012-Jan-09 03:16:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 03:16:54 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2012-Jan-09 03:16:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:16:54 INFO2 waittrk: Now tracking AGES3193_p3_136 2012-Jan-09 03:16:54 LOG4 waittrk: Current telescope position: Az = 131.73 ZA = 3.15 2012-Jan-09 03:16:54 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 03:16:54 LOG5 finish_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Jan-09 03:16:54 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 03:16:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:16:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 03:16:54 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2012-Jan-09 03:16:54 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 03:16:54 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Jan-09 03:16:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 03:16:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 03:16:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:16:54 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 03:16:54 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2012-Jan-09 03:16:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 03:16:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:16:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:16:55 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 03:16:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 03:16:55 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 03:16:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:16:55 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 03:16:55 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:16:55 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:16:55 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:16:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:16:55 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:16:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 03:16:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:16:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:16:55 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:16:55 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:16:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:16:55 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:16:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:16:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 03:16:55 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG5 dopset_later: Calling 'dopset_later 49.564877656035065' 2012-Jan-09 03:16:55 INFO3 dopset_later: Setting Doppler correction for 03:17:45 (49.6 seconds from now) 2012-Jan-09 03:16:55 LOG5 antvel: Calling 'antvel 132.010000 3.152884 F Heliocentric 49.564877656035065' 2012-Jan-09 03:16:55 LOG2 antvel: Transforming current Az = 132.01 ZA = 3.15 to apparent RA = 09:53:42.2 Dec = +20:26:50.0 2012-Jan-09 03:16:55 LOG2 antvel: Parameters to Doppler: Heliocentric 26265 2012 9 0.0 2012-Jan-09 03:16:55 INFO5 antvel: Computed antenna velocity: -17.30932 km/s 2012-Jan-09 03:16:55 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.309324182400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 03:16:55 INFO4 dopset_gen: New sky frequencies: 1381.323183 1381.323183 1381.323183 1381.323183 1381.323183 1381.323183 1381.323183 1381.323183 1381.323183 2012-Jan-09 03:16:55 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.323183 sky0=1381.323183 sky1=1381.323183 sky2=1381.323183 sky3=1381.323183 sky4=1381.323183 sky5=1381.323183 sky6=1381.323183 sky7=1381.323183 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 03:16:55 LOG2 dopset_gen: Result from 'sky2syn': 1631.323183 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 03:16:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631323183.0} 2012-Jan-09 03:16:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 03:16:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 03:16:55 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 03:16:55 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:15.5 Dec = +20:30:14.7 2012-Jan-09 03:16:55 LOG3 track_source: Calling 'track_source AGES3193_p3_136 095215.5 203014.7 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:16:55 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 03:16:55 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Jan-09 03:16:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_136} INFO {Slewing to source 'AGES3193_p3_136' ...} 2012-Jan-09 03:16:55 INFO1 track_source: Starting to track AGES3193_p3_136 2012-Jan-09 03:16:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_136" 2012-Jan-09 03:16:55 LOG3 vw_send: To DATATAKING: set ra 095215.5 2012-Jan-09 03:16:55 LOG3 vw_send: To DATATAKING: set dec 203014.7 2012-Jan-09 03:16:56 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 03:16:56 LOG3 vw_send: To DATATAKING: pnt tr 095215.5 203014.7 -CJ 2012-Jan-09 03:16:56 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:16:56 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 03:16:56 LOG5 finish_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Jan-09 03:16:56 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 03:16:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:16:56 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 03:16:56 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2012-Jan-09 03:16:56 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 03:16:56 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Jan-09 03:16:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 03:16:56 LOG3 waittrk: Start waittrk 5 2012-Jan-09 03:16:56 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 03:16:56 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631323183.0} 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_136" 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: set ra 095215.5 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: set dec 203014.7 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: vw% 095215.5 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: vw% 203014.7 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: pnt tr 095215.5 203014.7 -CJ 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 03:16:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 03:17:01 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2012-Jan-09 03:17:01 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 03:17:01 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Jan-09 03:17:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 03:17:06 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2012-Jan-09 03:17:06 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:17:06 INFO2 waittrk: Now tracking AGES3193_p3_136 2012-Jan-09 03:17:06 LOG4 waittrk: Current telescope position: Az = 131.35 ZA = 3.17 2012-Jan-09 03:17:06 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 03:17:06 LOG5 finish_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Jan-09 03:17:06 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 03:17:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:17:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 03:17:06 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2012-Jan-09 03:17:06 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 03:17:06 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Jan-09 03:17:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 03:17:06 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 03:17:06 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 03:17:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 03:17:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:17:06 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 03:17:06 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Jan-09 03:17:06 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 03:17:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:17:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:09 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 03:17:09 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 03:17:09 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2012-Jan-09 03:17:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 03:17:09 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 03:17:09 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Jan-09 03:17:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 03:17:09 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:17:09 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:17:09 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:17:09 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:17:09 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 03:17:09 LOG5 begin_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2012-Jan-09 03:17:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 03:17:10 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Jan-09 03:17:10 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 3 dB 2012-Jan-09 03:17:10 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Jan-09 03:17:10 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Jan-09 03:17:10 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 03:17:10 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 03:17:10 LOG5 end_task: Level: (5) ID = <10082> Status = 0 0 0 0 ok 2012-Jan-09 03:17:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.031 1.069 ALFA beam 1: 0.871 0.925 2012-Jan-09 03:17:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.920 0.976 ALFA beam 3: 1.046 1.095 2012-Jan-09 03:17:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.825 0.997 ALFA beam 5: 0.900 1.091 2012-Jan-09 03:17:10 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.056 0.014 ALFA beam 7: 0.918 0.014 2012-Jan-09 03:17:10 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 03:17:10 LOG5 finish_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Jan-09 03:17:10 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 03:17:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:17:10 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 03:17:10 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2012-Jan-09 03:17:10 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 03:17:10 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2012-Jan-09 03:17:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 03:17:10 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 03:17:10 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 03:17:10 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 03:17:10 LOG5 begin_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2012-Jan-09 03:17:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 03:17:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.069 0.871 0.925 2012-Jan-09 03:17:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.976 1.046 1.095 2012-Jan-09 03:17:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 0.997 0.900 1.091 2012-Jan-09 03:17:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.014 0.918 0.014 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.5 26.8 B 30.4 30.4 mn:A 0.1 -0.1 B -0.3 -0.3 gn: 11 11 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b0s1g0 rms:A 30.7 29.3 B 28.1 29.7 mn:A 0.1 -0.4 B -0.4 0.2 gn: 12 11 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.2 28.2 B 33.2 29.0 mn:A 0.6 0.6 B 0.2 0.0 gn: 7 11 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.6 27.2 B 31.3 31.3 mn:A -0.3 -0.3 B 0.5 0.2 gn: 8 10 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.3 29.6 mn:A 0.0 -0.3 B 0.4 0.1 gn: 10 11 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.7 30.0 B 32.6 30.3 mn:A 0.3 -0.4 B 0.1 0.1 gn: 11 12 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.9 28.7 B 31.0 27.7 mn:A 0.4 -0.3 B -0.0 -0.2 gn: 12 12 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.1 29.3 B 29.3 30.6 mn:A -0.3 0.3 B 0.2 0.2 gn: 12 12 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.3 29.4 B 30.1 30.3 mn:A -0.3 -0.3 B -0.4 -0.1 gn: 13 12 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.2 29.2 B 28.9 27.9 mn:A 0.1 0.1 B -0.3 0.2 gn: 16 13 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.9 30.8 B 30.4 30.4 mn:A 0.6 0.4 B 0.1 0.3 gn: 13 11 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.6 28.4 B 30.7 30.4 mn:A -0.4 0.2 B 0.1 0.1 gn: 12 11 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.8 29.1 B 15.3 15.8 mn:A -0.4 0.1 B 0.5 -0.3 gn: 13 31 2012-Jan-09 03:17:17 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.4 29.4 B 12.3 11.9 mn:A 0.6 0.5 B 0.1 0.2 gn: 14 31 2012-Jan-09 03:17:17 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 03:17:17 LOG5 end_task: Level: (5) ID = <10084> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 03:17:17 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 03:17:17 LOG5 finish_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 03:17:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:17:17 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 03:17:17 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 03:17:17 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 03:17:17 LOG5 finish_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 03:17:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:17:17 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 03:17:17 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 03:17:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 03:17:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 03:17:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 03:17:17 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 03:17:17 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 03:17:17 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 03:17:17 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 03:17:17 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 03:17:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 03:17:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:17:17 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 03:17:17 LOG5 begin_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2012-Jan-09 03:17:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 03:17:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 03:17:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:17:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:18 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 03:17:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 03:17:18 LOG5 end_task: Level: (5) ID = <10087> Status = 0 0 0 0 ok 2012-Jan-09 03:17:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 03:17:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:17:18 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 03:17:18 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:17:18 LOG5 begin_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2012-Jan-09 03:17:18 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0001.fits 2012-Jan-09 03:17:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120109.a2048.0001.fits} 2012-Jan-09 03:17:18 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:17:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:17:18 LOG5 end_task: Level: (5) ID = <10088> Status = 0 0 0 0 ok 2012-Jan-09 03:17:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:17:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 03:17:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:17:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:17:18 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:17:18 LOG5 begin_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2012-Jan-09 03:17:18 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:17:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:17:18 LOG5 end_task: Level: (5) ID = <10089> Status = 0 0 0 0 ok 2012-Jan-09 03:17:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:17:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:17:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 03:17:18 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 03:17:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 03:17:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 03:17:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 03:17:19 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 03:17:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 03:17:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 03:17:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 03:17:19 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 03:17:19 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 03:17:19 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 03:17:19 LOG5 log_alfabeam: Parameters: 9.8709722222222229 20.504083333333337 10.054347 2012.0250157806677 63.599930 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 0 9.870972222222244 20.504083333333355 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 1 9.873562902580526 20.408920986883590 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 2 9.877990317960544 20.472351705373857 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 3 9.875589633416816 20.568443499487628 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 4 9.868550051789772 20.600859117240709 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 5 9.863868297209974 20.533574419511950 2012-Jan-09 03:17:19 LOG4 log_alfabeam: ALFABEAM 6 9.866481938449478 20.437736106942943 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_136 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: patternid=200900100 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: scanid=200900101 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323183.0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323183.0 2012-Jan-09 03:17:19 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 03:17:19 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 03:17:19 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_136:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900100:scanid=200900101:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323183.0:topobfreqhz=1306323183.0:filetype=1 2012-Jan-09 03:17:19 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 03:17:19 LOG5 begin_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 03:17:19 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 03:17:19 LOG5 end_task: Level: (5) ID = <10092> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 03:17:19 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 03:17:19 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 03:17:19 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 03:17:19 LOG5 begin_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG4 from_mock: From MOCK: starok 2012-Jan-09 03:17:19 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 03:17:19 LOG5 end_task: Level: (5) ID = <10093> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 03:17:19 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900101 2012-Jan-09 03:17:19 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 03:17:19 LOG5 begin_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2012-Jan-09 03:17:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 03:17:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 03:17:19 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 03:17:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 03:17:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26240.00 2012-Jan-09 03:17:22 INFO2 got_mock_message: Mock spectrometer start file number is 00300 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 03:17:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 03:17:22 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:22 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:25 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:17:25.01 2012-Jan-09 03:17:25 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326093445.01 Mon Jan 9 03:17:25 2012 2012-Jan-09 03:17:25 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323183 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 03:17:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 03:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.516 (still bad) 2012-Jan-09 03:17:31 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 03:17:31 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 03:17:31 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 03:17:31 LOG5 end_task: Level: (5) ID = <10094> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 03:17:31 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 03:17:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 03:17:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 03:17:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 03:17:31 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 03:17:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 03:17:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 03:17:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 03:17:31 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 03:17:31 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 03:17:31 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 03:17:31 LOG5 log_alfabeam: Parameters: 9.8709722222222229 20.504083333333337 10.057689 2012.0250161609247 63.599930 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 0 9.870972222222218 20.504083333333345 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 1 9.873627061320615 20.409266730092536 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 2 9.878012231171803 20.473315139029072 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 3 9.875544602504268 20.569076449818269 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 4 9.868482808300147 20.600517834303748 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 5 9.863848865694417 20.532623772161692 2012-Jan-09 03:17:31 LOG4 log_alfabeam: ALFABEAM 6 9.866526921845507 20.437142040213569 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_136 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: patternid=200900100 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: scanid=200900102 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323183.0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323183.0 2012-Jan-09 03:17:31 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 03:17:31 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 03:17:31 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_136:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900100:scanid=200900102:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323183.0:topobfreqhz=1306323183.0:filetype=1 2012-Jan-09 03:17:31 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 03:17:31 LOG5 begin_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 03:17:31 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 03:17:31 LOG5 end_task: Level: (5) ID = <10097> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 03:17:31 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 03:17:31 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 03:17:31 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 03:17:31 LOG5 begin_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG4 from_mock: From MOCK: starok 2012-Jan-09 03:17:31 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 03:17:31 LOG5 end_task: Level: (5) ID = <10098> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 03:17:31 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900102 2012-Jan-09 03:17:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 03:17:31 LOG5 begin_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2012-Jan-09 03:17:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 03:17:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 03:17:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26252.00 2012-Jan-09 03:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.516 (still bad) 2012-Jan-09 03:17:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 03:17:32 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 03:17:34 INFO2 got_mock_message: Mock spectrometer start file number is 00400 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 03:17:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 03:17:34 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:34 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:17:37 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:17:37.02 2012-Jan-09 03:17:37 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326093457.02 Mon Jan 9 03:17:37 2012 2012-Jan-09 03:17:37 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323183 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 03:17:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:37 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 03:17:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 03:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Jan-09 03:17:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 03:17:43 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 03:17:43 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 03:17:43 LOG5 end_task: Level: (5) ID = <10099> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 03:17:43 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 03:17:43 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 03:17:43 LOG5 finish_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 03:17:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:17:43 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 03:17:43 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 03:17:43 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 132.01 and ZA = 3.15 2012-Jan-09 03:17:43 LOG3 track_source: Calling 'track_source AGES3193_p3_136 132.01 3.1528837236 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:17:43 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 03:17:43 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_136} INFO {Slewing to source 'AGES3193_p3_136' ...} 2012-Jan-09 03:17:43 INFO1 track_source: Starting to track AGES3193_p3_136 2012-Jan-09 03:17:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_136" 2012-Jan-09 03:17:43 LOG3 vw_send: To DATATAKING: set ra 132.01 2012-Jan-09 03:17:43 LOG3 vw_send: To DATATAKING: set dec 3.1528837236 2012-Jan-09 03:17:43 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 03:17:43 LOG3 vw_send: To DATATAKING: pnt tr 132.01 3.1528837236 -CF 2012-Jan-09 03:17:43 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:17:43 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 03:17:43 LOG5 finish_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 03:17:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:17:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 03:17:43 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 LOG1 fixed_driftmap: Parameters: HA = +00:09:59.9 Start = 10:03:42.3 LST = 10:03:39.7 diff = 2.6 secs 2012-Jan-09 03:17:43 INFO2 fixed_driftmap: Waiting 0.6 seconds for RA 9:53:42 2012-Jan-09 03:17:43 INFO2 lstwait: Already reached requested LST 10:03:40 2012-Jan-09 03:17:43 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 03:17:43 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_136" 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: set ra 132.01 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: set dec 3.1528837236 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: vw% 132.01 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: vw% 3.1528837236 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: pnt tr 132.01 3.1528837236 -CF 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 03:17:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:17:44 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 03:17:44 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 LOG4 lstwait: Finished waiting 0.43 seconds late 2012-Jan-09 03:17:44 INFO3 lstwait: Finished waiting 2012-Jan-09 03:17:44 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:17:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 03:17:44 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 03:17:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 03:17:44 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 03:17:44 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 03:17:44 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 03:17:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_136 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: patternid=200900103 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: scanid=200900103 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456323183.0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306323183.0 2012-Jan-09 03:17:44 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 03:17:44 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 03:17:44 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_136:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900103:scanid=200900103:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456323183.0:topobfreqhz=1306323183.0:filetype=1 2012-Jan-09 03:17:44 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 03:17:44 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 03:17:44 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 03:17:44 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 03:17:44 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 03:17:44 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 03:17:44 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 03:17:44 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 LOG4 from_mock: From MOCK: starok 2012-Jan-09 03:17:44 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 03:17:44 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 03:17:44 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900103 2012-Jan-09 03:17:44 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 03:17:44 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2012-Jan-09 03:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Jan-09 03:17:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 03:17:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 03:17:44 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 03:17:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 03:17:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26265.00 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.323183 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 03:17:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.323183 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Jan-09 03:17:46 INFO2 got_mock_message: Mock spectrometer start file number is 00500 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 03:17:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Jan-09 03:17:46 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:46 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:17:47 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2012-Jan-09 03:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Jan-09 03:17:48 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:17:49.01 2012-Jan-09 03:17:49 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326093469.01 Mon Jan 9 03:17:49 2012 2012-Jan-09 03:17:49 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 03:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.100 (still bad) 2012-Jan-09 03:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Jan-09 03:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.093 (still bad) 2012-Jan-09 03:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 03:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:18:00 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2012-Jan-09 03:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2012-Jan-09 03:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 03:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:18:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:18:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.073 0.874 0.925 2012-Jan-09 03:18:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.976 1.046 1.096 2012-Jan-09 03:18:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 0.997 0.902 1.091 2012-Jan-09 03:18:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.027 0.912 0.027 2012-Jan-09 03:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 03:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 03:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 03:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 03:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 03:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 03:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 03:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 03:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 03:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 03:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2012-Jan-09 03:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:19:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:19:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.075 0.877 0.928 2012-Jan-09 03:19:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.975 1.042 1.092 2012-Jan-09 03:19:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.012 0.901 1.089 2012-Jan-09 03:19:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.027 0.912 0.027 2012-Jan-09 03:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2012-Jan-09 03:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2012-Jan-09 03:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2012-Jan-09 03:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:20:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:20:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 1.082 0.877 0.927 2012-Jan-09 03:20:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.976 1.044 1.093 2012-Jan-09 03:20:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 0.999 0.899 1.090 2012-Jan-09 03:20:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.027 0.912 0.027 2012-Jan-09 03:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.092 (still bad) 2012-Jan-09 03:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 03:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:21:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:21:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.074 0.874 0.927 2012-Jan-09 03:21:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 0.974 1.045 1.094 2012-Jan-09 03:21:16 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.000 0.898 1.091 2012-Jan-09 03:21:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.026 0.914 0.027 2012-Jan-09 03:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Jan-09 03:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2012-Jan-09 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2012-Jan-09 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.097 (still bad) 2012-Jan-09 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.095 (still bad) 2012-Jan-09 03:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.094 (still bad) 2012-Jan-09 03:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2012-Jan-09 03:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:22:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.074 0.876 0.926 2012-Jan-09 03:22:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.974 1.045 1.092 2012-Jan-09 03:22:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.005 0.899 1.091 2012-Jan-09 03:22:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.026 0.913 0.026 2012-Jan-09 03:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:23:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.075 0.880 0.930 2012-Jan-09 03:23:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.977 1.044 1.095 2012-Jan-09 03:23:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 0.999 0.899 1.090 2012-Jan-09 03:23:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.026 0.912 0.026 2012-Jan-09 03:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2012-Jan-09 03:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 03:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 03:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:24:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:24:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.078 0.877 0.926 2012-Jan-09 03:24:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.975 1.043 1.092 2012-Jan-09 03:24:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 0.999 0.901 1.091 2012-Jan-09 03:24:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.026 0.914 0.027 2012-Jan-09 03:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.091 (still bad) 2012-Jan-09 03:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 03:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:25:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:25:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.084 0.884 0.932 2012-Jan-09 03:25:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.983 1.053 1.104 2012-Jan-09 03:25:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.007 0.908 1.097 2012-Jan-09 03:25:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.026 0.919 0.026 2012-Jan-09 03:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:26:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:26:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 1.082 0.883 0.933 2012-Jan-09 03:26:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.984 1.047 1.098 2012-Jan-09 03:26:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.002 0.903 1.093 2012-Jan-09 03:26:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.026 0.914 0.027 2012-Jan-09 03:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:27:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.036 1.080 0.878 0.928 2012-Jan-09 03:27:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.983 1.046 1.098 2012-Jan-09 03:27:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.005 0.902 1.097 2012-Jan-09 03:27:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.026 0.917 0.027 2012-Jan-09 03:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2012-Jan-09 03:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Jan-09 03:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.098 (still bad) 2012-Jan-09 03:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Jan-09 03:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Jan-09 03:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Jan-09 03:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Jan-09 03:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.096 (still bad) 2012-Jan-09 03:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Jan-09 03:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2012-Jan-09 03:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.097 (still bad) 2012-Jan-09 03:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Jan-09 03:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:28:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:28:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.074 0.876 0.927 2012-Jan-09 03:28:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.991 1.045 1.096 2012-Jan-09 03:28:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.006 0.903 1.092 2012-Jan-09 03:28:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.026 0.915 0.026 2012-Jan-09 03:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 03:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Jan-09 03:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2012-Jan-09 03:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.157 (still bad) 2012-Jan-09 03:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.171 (still bad) 2012-Jan-09 03:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.174 (still bad) 2012-Jan-09 03:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.167 (still bad) 2012-Jan-09 03:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.159 (still bad) 2012-Jan-09 03:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.135 (still bad) 2012-Jan-09 03:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:29:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:29:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.080 0.880 0.929 2012-Jan-09 03:29:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.981 1.046 1.096 2012-Jan-09 03:29:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.001 0.913 1.104 2012-Jan-09 03:29:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.026 0.931 0.026 2012-Jan-09 03:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 03:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2012-Jan-09 03:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2012-Jan-09 03:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2012-Jan-09 03:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:30:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:30:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.079 0.878 0.928 2012-Jan-09 03:30:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.985 1.045 1.098 2012-Jan-09 03:30:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.001 0.900 1.094 2012-Jan-09 03:30:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.026 0.914 0.027 2012-Jan-09 03:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 03:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 03:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 03:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 03:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 03:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 03:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:31:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:31:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.080 0.877 0.928 2012-Jan-09 03:31:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.981 1.045 1.098 2012-Jan-09 03:31:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.005 0.901 1.094 2012-Jan-09 03:31:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.026 0.918 0.027 2012-Jan-09 03:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 03:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 03:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 03:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 03:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 03:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 03:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2012-Jan-09 03:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 03:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 03:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 03:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 03:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 03:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 03:32:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:32:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.078 0.877 0.928 2012-Jan-09 03:32:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 0.985 1.046 1.097 2012-Jan-09 03:32:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.005 0.904 1.097 2012-Jan-09 03:32:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.027 0.915 0.027 2012-Jan-09 03:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 03:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:33:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.076 0.878 0.929 2012-Jan-09 03:33:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.982 1.045 1.097 2012-Jan-09 03:33:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.001 0.902 1.093 2012-Jan-09 03:33:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.026 0.916 0.027 2012-Jan-09 03:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 03:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:34:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.074 0.877 0.929 2012-Jan-09 03:34:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 0.987 1.049 1.100 2012-Jan-09 03:34:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.005 0.907 1.100 2012-Jan-09 03:34:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.026 0.920 0.026 2012-Jan-09 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.101 (still bad) 2012-Jan-09 03:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.096 (still bad) 2012-Jan-09 03:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Jan-09 03:35:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Jan-09 03:35:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 1.073 0.877 0.930 2012-Jan-09 03:35:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.983 1.046 1.095 2012-Jan-09 03:35:36 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.000 0.901 1.092 2012-Jan-09 03:35:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.022 0.916 0.022 2012-Jan-09 03:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.094 (still bad) 2012-Jan-09 03:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.096 (still bad) 2012-Jan-09 03:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.093 (still bad) 2012-Jan-09 03:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.095 (still bad) 2012-Jan-09 03:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Jan-09 03:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.094 (still bad) 2012-Jan-09 03:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2012-Jan-09 03:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.095 (still bad) 2012-Jan-09 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2012-Jan-09 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.093 (still bad) 2012-Jan-09 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.096 (still bad) 2012-Jan-09 03:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.098 (still bad) 2012-Jan-09 03:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Jan-09 03:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Jan-09 03:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2012-Jan-09 03:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2012-Jan-09 03:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Jan-09 03:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.099 (still bad) 2012-Jan-09 03:36:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 03:36:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 1.084 0.875 0.928 2012-Jan-09 03:36:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.978 1.043 1.093 2012-Jan-09 03:36:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.001 0.899 1.091 2012-Jan-09 03:36:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.025 0.916 0.026 2012-Jan-09 03:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2012-Jan-09 03:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.095 (still bad) 2012-Jan-09 03:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2012-Jan-09 03:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Jan-09 03:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.097 (still bad) 2012-Jan-09 03:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2012-Jan-09 03:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.092 (still bad) 2012-Jan-09 03:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.094 (still bad) 2012-Jan-09 03:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Jan-09 03:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.093 (still bad) 2012-Jan-09 03:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.099 (still bad) 2012-Jan-09 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.091 (still bad) 2012-Jan-09 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.092 (still bad) 2012-Jan-09 03:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 03:37:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:37:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 1.069 0.877 0.927 2012-Jan-09 03:37:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.980 1.042 1.094 2012-Jan-09 03:37:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.000 0.897 1.090 2012-Jan-09 03:37:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.026 0.915 0.026 2012-Jan-09 03:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.093 (still bad) 2012-Jan-09 03:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.095 (still bad) 2012-Jan-09 03:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:37:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 03:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:37:50 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 03:37:50 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 03:37:50 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 03:37:50 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2012-Jan-09 03:37:50 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 03:37:50 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2012-Jan-09 03:37:50 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 03:37:50 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2012-Jan-09 03:37:50 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 03:37:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 03:37:50 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 03:37:50 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2012-Jan-09 03:37:50 COMMAND run_command_line: EXECUTING command 34: 'ENDIF' 2012-Jan-09 03:37:50 COMMAND run_command_line: EXECUTING command 37: 'IF LSTSLEW(AGES3193_p3_138) < 103011 THEN' 2012-Jan-09 03:37:50 LOG3 is_if_valid: Current source data: up 107.3 7.4 UP - - 53 1.8 2012-Jan-09 03:37:50 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_138) < 103011 2012-Jan-09 03:37:50 INFO5 is_if_valid: Condition parsed as: 10.427227 < 10.503055555555555 2012-Jan-09 03:37:50 COMMAND run_command_line: EXECUTING command 38: 'FIXEDDRIFT az=104.84 alfaangle=-84.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_138 ra=95300.00 dec=202730.00' 2012-Jan-09 03:37:50 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 03:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.094 (still bad) 2012-Jan-09 03:37:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 03:37:51 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 104.84 -84.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_138 95300.00 202730.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:37:51 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 03:37:51 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Jan-09 03:37:51 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_136' 2012-Jan-09 03:37:51 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 03:37:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_138} 2012-Jan-09 03:37:51 INFO3 fixed_driftmap: Sending telescope to Az = 104.84 and ZA = 8.85 2012-Jan-09 03:37:51 LOG3 track_source: Calling 'track_source AGES3193_p3_138 104.84 8.8477046667 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:37:51 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 03:37:51 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Jan-09 03:37:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_138} INFO {Slewing to source 'AGES3193_p3_138' ...} 2012-Jan-09 03:37:51 INFO1 track_source: Starting to track AGES3193_p3_138 2012-Jan-09 03:37:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_138" 2012-Jan-09 03:37:51 LOG3 vw_send: To DATATAKING: set ra 104.84 2012-Jan-09 03:37:51 LOG3 vw_send: To DATATAKING: set dec 8.8477046667 2012-Jan-09 03:37:51 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 03:37:51 LOG3 vw_send: To DATATAKING: pnt tr 104.84 8.8477046667 -CF 2012-Jan-09 03:37:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:37:51 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 03:37:51 LOG5 finish_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Jan-09 03:37:51 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 03:37:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:37:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 03:37:51 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2012-Jan-09 03:37:51 START begin_task: Starting task 'rotate ALFA to -84.6 degrees' 2012-Jan-09 03:37:51 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Jan-09 03:37:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -84.6 degrees ...} 2012-Jan-09 03:37:51 INFO2 rotate_alfa: ALFA commanded to -84.6 degrees 2012-Jan-09 03:37:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION -84.6 REPLY 2012-Jan-09 03:37:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 03:37:51 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 03:37:51 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_138" 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: set ra 104.84 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: set dec 8.8477046667 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: vw% 104.84 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: vw% 8.8477046667 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: pnt tr 104.84 8.8477046667 -CF 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 03:37:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:39:14 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 03:39:14 INFO3 alfa_motor: ALFA rotator in-position -84.60 degrees 2012-Jan-09 03:39:14 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 03:39:14 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2012-Jan-09 03:39:14 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:39:14 STOP finish_task: Finishing task 'rotate ALFA to -84.6 degrees' 2012-Jan-09 03:39:14 LOG5 finish_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Jan-09 03:39:14 INFO2 finish_task: DONE finished configuration: rotating ALFA to -84.6 degrees 2012-Jan-09 03:39:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:39:14 STOP end_task: Finishing task 'rotate ALFA to -84.6 degrees' with status 'OK' 2012-Jan-09 03:39:14 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2012-Jan-09 03:39:14 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 03:39:14 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Jan-09 03:39:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 03:39:14 LOG3 waittrk: Start waittrk 5 2012-Jan-09 03:39:14 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 03:39:14 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Jan-09 03:39:19 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 03:39:19 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2012-Jan-09 03:39:19 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 03:39:19 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Jan-09 03:40:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 03:40:18 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2012-Jan-09 03:40:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:40:18 INFO2 waittrk: Now tracking AGES3193_p3_138 2012-Jan-09 03:40:18 LOG4 waittrk: Current telescope position: Az = 104.64 ZA = 8.85 2012-Jan-09 03:40:18 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 03:40:18 LOG5 finish_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Jan-09 03:40:18 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 03:40:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:40:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 03:40:18 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2012-Jan-09 03:40:18 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 03:40:18 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Jan-09 03:40:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 03:40:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 03:40:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:40:18 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 03:40:18 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2012-Jan-09 03:40:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 03:40:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:40:19 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 03:40:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 03:40:19 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2012-Jan-09 03:40:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 03:40:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:40:19 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 03:40:19 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:40:19 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Jan-09 03:40:19 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:40:19 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:40:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:40:19 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2012-Jan-09 03:40:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:40:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 03:40:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:40:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:40:19 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:40:19 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Jan-09 03:40:19 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:40:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:40:19 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2012-Jan-09 03:40:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:40:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:40:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 03:40:19 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2012-Jan-09 03:40:19 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Jan-09 03:40:19 INFO2 astwait: Waiting for 172 seconds from 07:40:19 to 07:43:11 UTC ... 2012-Jan-09 03:40:19 LOG4 send_obs_status: To obs_status: <1> TASKTIME 172 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 03:40:19 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Jan-09 03:40:19 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Jan-09 03:43:11 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 INFO3 astwait: Finished waiting 2012-Jan-09 03:43:11 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:43:11 LOG5 dopset_later: Calling 'dopset_later 60.767164788616114' 2012-Jan-09 03:43:11 INFO3 dopset_later: Setting Doppler correction for 03:44:11 (60.8 seconds from now) 2012-Jan-09 03:43:11 LOG5 antvel: Calling 'antvel 104.840000 8.847705 F Heliocentric 60.767164788616114' 2012-Jan-09 03:43:11 LOG2 antvel: Transforming current Az = 104.84 ZA = 8.85 to apparent RA = 09:53:42.2 Dec = +20:23:50.0 2012-Jan-09 03:43:11 LOG2 antvel: Parameters to Doppler: Heliocentric 27851 2012 9 0.0 2012-Jan-09 03:43:11 INFO5 antvel: Computed antenna velocity: -17.26297 km/s 2012-Jan-09 03:43:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.262966697900001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 03:43:11 INFO4 dopset_gen: New sky frequencies: 1381.322969 1381.322969 1381.322969 1381.322969 1381.322969 1381.322969 1381.322969 1381.322969 1381.322969 2012-Jan-09 03:43:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.322969 sky0=1381.322969 sky1=1381.322969 sky2=1381.322969 sky3=1381.322969 sky4=1381.322969 sky5=1381.322969 sky6=1381.322969 sky7=1381.322969 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 03:43:11 LOG2 dopset_gen: Result from 'sky2syn': 1631.322969 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631322969.0} 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 03:43:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 03:43:11 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 03:43:11 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:04.3 Dec = +20:27:14.6 2012-Jan-09 03:43:11 LOG3 track_source: Calling 'track_source AGES3193_p3_138 095204.3 202714.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:43:11 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 03:43:11 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_138} INFO {Slewing to source 'AGES3193_p3_138' ...} 2012-Jan-09 03:43:11 INFO1 track_source: Starting to track AGES3193_p3_138 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_138" 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: set ra 095204.3 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: set dec 202714.6 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: pnt tr 095204.3 202714.6 -CJ 2012-Jan-09 03:43:11 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:43:11 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 03:43:11 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 03:43:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 03:43:11 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 03:43:11 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 03:43:11 LOG3 waittrk: Start waittrk 5 2012-Jan-09 03:43:11 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 03:43:11 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631322969.0} 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_138" 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: set ra 095204.3 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: set dec 202714.6 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: pnt tr 095204.3 202714.6 -CJ 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: 095204.3 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: vw% 202714.6 2012-Jan-09 03:43:11 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Jan-09 03:43:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 03:43:16 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2012-Jan-09 03:43:16 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 03:43:16 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Jan-09 03:43:18 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 03:43:18 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2012-Jan-09 03:43:18 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:43:18 INFO2 waittrk: Now tracking AGES3193_p3_138 2012-Jan-09 03:43:18 LOG4 waittrk: Current telescope position: Az = 104.59 ZA = 8.86 2012-Jan-09 03:43:18 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 03:43:18 LOG5 finish_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Jan-09 03:43:18 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 03:43:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:18 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 03:43:18 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2012-Jan-09 03:43:18 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 03:43:18 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Jan-09 03:43:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 03:43:18 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 03:43:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 03:43:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 03:43:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:43:18 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 03:43:18 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2012-Jan-09 03:43:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 03:43:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:43:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:21 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 03:43:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 03:43:21 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2012-Jan-09 03:43:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 03:43:21 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 03:43:21 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Jan-09 03:43:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 03:43:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:43:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:43:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:43:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 03:43:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 03:43:21 LOG5 begin_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2012-Jan-09 03:43:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 03:43:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Jan-09 03:43:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 4 dB 2012-Jan-09 03:43:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Jan-09 03:43:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Jan-09 03:43:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 03:43:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 03:43:22 LOG5 end_task: Level: (5) ID = <10125> Status = 0 0 0 0 ok 2012-Jan-09 03:43:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.067 1.074 ALFA beam 1: 0.910 0.893 2012-Jan-09 03:43:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.931 0.964 ALFA beam 3: 1.036 1.118 2012-Jan-09 03:43:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.832 1.045 ALFA beam 5: 0.947 0.860 2012-Jan-09 03:43:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.106 0.014 ALFA beam 7: 0.961 0.014 2012-Jan-09 03:43:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 03:43:22 LOG5 finish_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Jan-09 03:43:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 03:43:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 03:43:22 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2012-Jan-09 03:43:22 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 03:43:22 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Jan-09 03:43:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 03:43:22 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 03:43:22 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 03:43:22 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 03:43:22 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2012-Jan-09 03:43:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 03:43:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.074 0.910 0.893 2012-Jan-09 03:43:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.964 1.036 1.118 2012-Jan-09 03:43:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.045 0.947 0.860 2012-Jan-09 03:43:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.014 0.961 0.014 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.3 B 30.4 30.4 mn:A 0.2 -0.0 B -0.3 -0.3 gn: 11 11 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.2 29.9 B 28.1 29.7 mn:A 0.1 -0.4 B -0.4 0.2 gn: 12 11 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.6 28.7 B 32.5 28.3 mn:A 0.5 0.6 B 0.1 0.1 gn: 7 11 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.1 27.7 B 30.7 30.8 mn:A -0.3 -0.3 B 0.4 0.3 gn: 8 10 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b2s0g0 rms:A 28.9 28.0 B 28.0 29.3 mn:A -0.0 -0.3 B 0.3 0.2 gn: 10 11 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.6 29.9 B 32.3 30.0 mn:A 0.3 -0.3 B 0.1 0.2 gn: 11 12 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.7 28.5 B 31.2 27.9 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 12 12 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.9 29.2 B 29.6 30.8 mn:A -0.2 0.3 B 0.2 0.2 gn: 12 12 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 30.8 31.0 mn:A -0.2 -0.3 B -0.4 0.1 gn: 13 12 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.4 29.3 B 29.5 28.4 mn:A 0.1 0.1 B -0.3 0.2 gn: 16 13 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.3 28.2 B 31.0 31.0 mn:A 0.4 0.5 B -0.0 0.5 gn: 12 11 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b5s1g0 rms:A 29.5 29.2 B 31.2 30.9 mn:A -0.3 0.2 B 0.0 0.3 gn: 12 11 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.6 29.9 B 15.3 15.8 mn:A -0.3 0.2 B 0.3 -0.3 gn: 13 31 2012-Jan-09 03:43:28 INFO3 from_mock: From MOCK: b6s1g0 rms:A 33.1 30.1 B 12.3 11.9 mn:A 0.7 0.6 B 0.1 0.2 gn: 14 31 2012-Jan-09 03:43:28 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 03:43:28 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 0 ok 2012-Jan-09 03:43:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 03:43:28 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 03:43:28 LOG5 finish_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Jan-09 03:43:28 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 03:43:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:29 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 03:43:29 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 03:43:29 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 03:43:29 LOG5 finish_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 03:43:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:29 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 03:43:29 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 03:43:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 03:43:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 03:43:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 03:43:29 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 03:43:29 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 03:43:29 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 03:43:29 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 03:43:29 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 03:43:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 03:43:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:43:29 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 03:43:29 LOG5 begin_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 03:43:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 03:43:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 03:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:29 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 03:43:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 03:43:29 LOG5 end_task: Level: (5) ID = <10130> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 03:43:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:43:29 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 03:43:29 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:43:29 LOG5 begin_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Jan-09 03:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0002.fits 2012-Jan-09 03:43:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120109.a2048.0002.fits} 2012-Jan-09 03:43:30 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:43:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:43:30 LOG5 end_task: Level: (5) ID = <10131> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:43:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 03:43:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 03:43:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:43:30 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 03:43:30 LOG5 begin_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 03:43:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 03:43:30 LOG5 end_task: Level: (5) ID = <10132> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 03:43:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 03:43:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 03:43:30 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 03:43:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 03:43:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 03:43:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 03:43:30 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 03:43:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 03:43:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 03:43:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 03:43:30 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 03:43:30 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 03:43:30 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 03:43:30 LOG5 log_alfabeam: Parameters: 9.8678611111111127 20.454055555555556 10.492209 2012.0250655943416 -84.600052 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 0 9.867861111111115 20.454055555555552 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 1 9.865993304572015 20.544743154830897 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 2 9.860584911443995 20.484001076729541 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 3 9.862500532272824 20.392987345598947 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 4 9.869792059142224 20.364012468176863 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 5 9.875137976931917 20.424239423017159 2012-Jan-09 03:43:30 LOG4 log_alfabeam: ALFABEAM 6 9.873254244631454 20.513958166351209 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_138 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: patternid=200900103 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: scanid=200900104 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322969.0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322969.0 2012-Jan-09 03:43:30 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 03:43:30 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 03:43:30 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_138:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900103:scanid=200900104:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322969.0:topobfreqhz=1306322969.0:filetype=1 2012-Jan-09 03:43:30 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 03:43:30 LOG5 begin_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 03:43:30 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 03:43:30 LOG5 end_task: Level: (5) ID = <10135> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 03:43:30 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 03:43:30 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 03:43:30 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 03:43:30 LOG5 begin_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG4 from_mock: From MOCK: starok 2012-Jan-09 03:43:30 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 03:43:30 LOG5 end_task: Level: (5) ID = <10136> Status = 0 0 0 0 ok 2012-Jan-09 03:43:30 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 03:43:30 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900104 2012-Jan-09 03:43:31 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 03:43:31 LOG5 begin_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Jan-09 03:43:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 03:43:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 03:43:31 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 03:43:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 03:43:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27812.00 2012-Jan-09 03:43:33 INFO2 got_mock_message: Mock spectrometer start file number is 00600 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 03:43:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 03:43:33 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:33 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:36 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:43:36.01 2012-Jan-09 03:43:36 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326095016.01 Mon Jan 9 03:43:36 2012 2012-Jan-09 03:43:36 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322969 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 03:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.482 (still bad) 2012-Jan-09 03:43:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:43:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 03:43:42 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 03:43:42 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 03:43:42 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 03:43:42 LOG5 end_task: Level: (5) ID = <10137> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 03:43:42 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 03:43:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 03:43:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 03:43:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 03:43:42 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 03:43:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 03:43:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 03:43:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 03:43:42 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 03:43:42 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 03:43:42 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 03:43:42 LOG5 log_alfabeam: Parameters: 9.8678611111111127 20.454055555555556 10.495273 2012.0250659429107 -84.600052 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 0 9.867861111111115 20.454055555555552 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 1 9.865985103367722 20.544708831366844 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 2 9.860582256229881 20.483873154136788 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 3 9.862505880700356 20.392896210352230 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 4 9.869799881379587 20.364044783108280 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 5 9.875140609025255 20.424366411379552 2012-Jan-09 03:43:42 LOG4 log_alfabeam: ALFABEAM 6 9.873248862500882 20.514055273394604 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_138 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: patternid=200900103 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: scanid=200900105 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322969.0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322969.0 2012-Jan-09 03:43:42 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 03:43:42 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 03:43:42 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_138:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900103:scanid=200900105:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322969.0:topobfreqhz=1306322969.0:filetype=1 2012-Jan-09 03:43:42 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 03:43:42 LOG5 begin_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 03:43:42 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 03:43:42 LOG5 end_task: Level: (5) ID = <10140> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 03:43:42 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 03:43:42 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 03:43:42 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 03:43:42 LOG5 begin_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG4 from_mock: From MOCK: starok 2012-Jan-09 03:43:42 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 03:43:42 LOG5 end_task: Level: (5) ID = <10141> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 03:43:42 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900105 2012-Jan-09 03:43:42 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 03:43:42 LOG5 begin_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Jan-09 03:43:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 03:43:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 03:43:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27823.00 2012-Jan-09 03:43:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 03:43:43 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 03:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.559 (still bad) 2012-Jan-09 03:43:45 INFO2 got_mock_message: Mock spectrometer start file number is 00700 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 03:43:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 03:43:45 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:45 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 03:43:48 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:43:48.01 2012-Jan-09 03:43:48 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326095028.01 Mon Jan 9 03:43:48 2012 2012-Jan-09 03:43:48 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322969 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 03:43:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:43:48 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 03:43:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 03:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Jan-09 03:43:54 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 03:43:54 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 03:43:54 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 03:43:54 LOG5 end_task: Level: (5) ID = <10142> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 03:43:54 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 03:43:54 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 03:43:54 LOG5 finish_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 03:43:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:54 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 03:43:54 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 03:43:54 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 104.84 and ZA = 8.85 2012-Jan-09 03:43:54 LOG3 track_source: Calling 'track_source AGES3193_p3_138 104.84 8.8477046667 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 03:43:54 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 03:43:54 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_138} INFO {Slewing to source 'AGES3193_p3_138' ...} 2012-Jan-09 03:43:54 INFO1 track_source: Starting to track AGES3193_p3_138 2012-Jan-09 03:43:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_138" 2012-Jan-09 03:43:54 LOG3 vw_send: To DATATAKING: set ra 104.84 2012-Jan-09 03:43:54 LOG3 vw_send: To DATATAKING: set dec 8.8477046667 2012-Jan-09 03:43:54 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 03:43:54 LOG3 vw_send: To DATATAKING: pnt tr 104.84 8.8477046667 -CF 2012-Jan-09 03:43:54 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:43:54 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 03:43:54 LOG5 finish_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 03:43:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 03:43:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 03:43:54 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 LOG1 fixed_driftmap: Parameters: HA = +00:36:30.5 Start = 10:30:12.8 LST = 10:29:55.0 diff = 17.8 secs 2012-Jan-09 03:43:54 INFO2 fixed_driftmap: Waiting 15.8 seconds for RA 9:53:42 2012-Jan-09 03:43:54 INFO2 lstwait: Waiting for 15.8 secs from LST 10:29:55 to LST 10:30:11 ... 2012-Jan-09 03:43:54 LOG4 send_obs_status: To obs_status: <1> TASKTIME 15.77315279149615 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 03:43:54 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 03:43:54 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_138" 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: set ra 104.84 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: set dec 8.8477046667 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 104.84 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 8.8477046667 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: pnt tr 104.84 8.8477046667 -CF 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Jan-09 03:44:10 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 03:44:10 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2012-Jan-09 03:44:10 LOG4 lstwait: Finished waiting 0.23 seconds late 2012-Jan-09 03:44:10 INFO3 lstwait: Finished waiting 2012-Jan-09 03:44:10 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 03:44:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 03:44:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 03:44:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 03:44:10 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 03:44:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 03:44:10 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Jan-09 03:44:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 03:44:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_138 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: patternid=200900106 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: scanid=200900106 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322969.0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322969.0 2012-Jan-09 03:44:10 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 03:44:10 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 03:44:10 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_138:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900106:scanid=200900106:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322969.0:topobfreqhz=1306322969.0:filetype=1 2012-Jan-09 03:44:10 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 03:44:10 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Jan-09 03:44:10 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 03:44:10 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 03:44:10 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2012-Jan-09 03:44:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 03:44:10 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 03:44:10 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 03:44:10 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 03:44:10 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Jan-09 03:44:10 LOG4 from_mock: From MOCK: starok 2012-Jan-09 03:44:10 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 03:44:10 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2012-Jan-09 03:44:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 03:44:10 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900106 2012-Jan-09 03:44:11 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 03:44:11 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Jan-09 03:44:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 03:44:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 03:44:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 03:44:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 03:44:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27852.00 2012-Jan-09 03:44:12 INFO2 got_mock_message: Mock spectrometer start file number is 00800 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 03:44:12 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Jan-09 03:44:12 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:12 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322969 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 03:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Jan-09 03:44:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322969 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 03:44:15 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 03:44:15.01 2012-Jan-09 03:44:15 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326095055.01 Mon Jan 9 03:44:15 2012 2012-Jan-09 03:44:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 03:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Jan-09 03:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.114 (still bad) 2012-Jan-09 03:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Jan-09 03:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Jan-09 03:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.115 (still bad) 2012-Jan-09 03:44:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 03:44:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.072 0.913 0.894 2012-Jan-09 03:44:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.972 1.034 1.121 2012-Jan-09 03:44:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.041 0.948 0.873 2012-Jan-09 03:44:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.105 0.025 0.960 0.025 2012-Jan-09 03:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 03:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 03:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 03:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 03:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.119 (still bad) 2012-Jan-09 03:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 03:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 03:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 03:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 03:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 03:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 03:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 03:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 03:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 03:45:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:45:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.062 0.912 0.894 2012-Jan-09 03:45:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.963 1.033 1.116 2012-Jan-09 03:45:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.039 0.949 0.873 2012-Jan-09 03:45:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.026 0.959 0.026 2012-Jan-09 03:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 03:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 03:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 03:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:46:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:46:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.063 0.909 0.889 2012-Jan-09 03:46:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.964 1.029 1.115 2012-Jan-09 03:46:28 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.037 0.949 0.871 2012-Jan-09 03:46:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.027 0.960 0.027 2012-Jan-09 03:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 03:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 03:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 03:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 03:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:47:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:47:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.064 0.908 0.890 2012-Jan-09 03:47:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.962 1.032 1.117 2012-Jan-09 03:47:29 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.032 0.942 0.867 2012-Jan-09 03:47:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.027 0.957 0.027 2012-Jan-09 03:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 03:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 03:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 03:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 03:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 03:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:48:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.059 0.908 0.888 2012-Jan-09 03:48:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.961 1.028 1.112 2012-Jan-09 03:48:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.033 0.943 0.866 2012-Jan-09 03:48:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.027 0.958 0.027 2012-Jan-09 03:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.112 (still bad) 2012-Jan-09 03:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Jan-09 03:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.111 (still bad) 2012-Jan-09 03:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.110 (still bad) 2012-Jan-09 03:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Jan-09 03:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:49:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:49:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.058 0.906 0.886 2012-Jan-09 03:49:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.959 1.026 1.110 2012-Jan-09 03:49:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.032 0.946 0.868 2012-Jan-09 03:49:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.027 0.957 0.027 2012-Jan-09 03:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 03:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 03:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 03:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 03:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 03:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 03:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 03:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 03:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:50:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:50:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.055 0.904 0.885 2012-Jan-09 03:50:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 0.960 1.026 1.113 2012-Jan-09 03:50:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.029 0.944 0.866 2012-Jan-09 03:50:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.027 0.957 0.027 2012-Jan-09 03:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 03:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 03:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:51:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.065 1.053 0.904 0.885 2012-Jan-09 03:51:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.960 1.025 1.109 2012-Jan-09 03:51:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.024 0.943 0.865 2012-Jan-09 03:51:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.027 0.957 0.027 2012-Jan-09 03:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 03:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:52:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:52:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.052 0.903 0.884 2012-Jan-09 03:52:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.920 0.962 1.025 1.109 2012-Jan-09 03:52:35 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.029 0.943 0.864 2012-Jan-09 03:52:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.027 0.957 0.027 2012-Jan-09 03:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:53:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:53:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.061 0.906 0.887 2012-Jan-09 03:53:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 0.964 1.026 1.112 2012-Jan-09 03:53:37 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.023 0.941 0.867 2012-Jan-09 03:53:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.100 0.026 0.958 0.027 2012-Jan-09 03:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Jan-09 03:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 03:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 03:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 03:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 03:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Jan-09 03:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Jan-09 03:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.109 (still bad) 2012-Jan-09 03:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Jan-09 03:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.108 (still bad) 2012-Jan-09 03:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.113 (still bad) 2012-Jan-09 03:54:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Jan-09 03:54:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.061 0.907 0.890 2012-Jan-09 03:54:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.919 0.962 1.025 1.110 2012-Jan-09 03:54:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.020 0.942 0.865 2012-Jan-09 03:54:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.024 0.956 0.024 2012-Jan-09 03:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.107 (still bad) 2012-Jan-09 03:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.111 (still bad) 2012-Jan-09 03:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Jan-09 03:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.109 (still bad) 2012-Jan-09 03:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Jan-09 03:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Jan-09 03:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 03:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 03:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 03:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.132 (still bad) 2012-Jan-09 03:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2012-Jan-09 03:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 03:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 03:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 03:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 03:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 03:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 03:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 03:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 03:55:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:55:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 1.090 0.910 0.893 2012-Jan-09 03:55:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.959 1.026 1.110 2012-Jan-09 03:55:39 LOG4 check_wapp_levels: WAPP-3 power levels: 0.824 1.019 0.944 0.864 2012-Jan-09 03:55:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.097 0.027 0.956 0.027 2012-Jan-09 03:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 03:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:56:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:56:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.053 0.902 0.886 2012-Jan-09 03:56:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.959 1.022 1.108 2012-Jan-09 03:56:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 1.019 0.939 0.864 2012-Jan-09 03:56:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.094 0.027 0.954 0.027 2012-Jan-09 03:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 03:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 03:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 03:57:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 03:57:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.055 0.903 0.883 2012-Jan-09 03:57:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.916 0.959 1.028 1.115 2012-Jan-09 03:57:42 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 1.020 0.938 0.861 2012-Jan-09 03:57:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.096 0.027 0.954 0.027 2012-Jan-09 03:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 03:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 03:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 03:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 03:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 03:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 03:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 03:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:58:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:58:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.053 0.914 0.895 2012-Jan-09 03:58:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.958 1.021 1.107 2012-Jan-09 03:58:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 1.015 0.937 0.864 2012-Jan-09 03:58:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.026 0.954 0.027 2012-Jan-09 03:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 03:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 03:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 03:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 03:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 03:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:59:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 03:59:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.054 0.902 0.882 2012-Jan-09 03:59:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.917 0.959 1.022 1.107 2012-Jan-09 03:59:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 1.019 0.936 0.863 2012-Jan-09 03:59:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.093 0.026 0.951 0.027 2012-Jan-09 03:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 03:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 03:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 03:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 03:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 04:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 04:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 04:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 04:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 04:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 04:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 04:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 04:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 04:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 04:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 04:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:00:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:00:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.052 0.900 0.882 2012-Jan-09 04:00:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.915 0.957 1.022 1.108 2012-Jan-09 04:00:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 1.023 0.935 0.861 2012-Jan-09 04:00:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.027 0.950 0.027 2012-Jan-09 04:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 04:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 04:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 04:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 04:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 04:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 04:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 04:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 04:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 04:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 04:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 04:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 04:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:01:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:01:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.053 0.902 0.884 2012-Jan-09 04:01:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.913 0.959 1.023 1.106 2012-Jan-09 04:01:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 1.025 0.935 0.861 2012-Jan-09 04:01:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.027 0.951 0.027 2012-Jan-09 04:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 04:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 04:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 04:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 04:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 04:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 04:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 04:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 04:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 04:02:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:02:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.049 0.899 0.884 2012-Jan-09 04:02:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.914 0.959 1.023 1.105 2012-Jan-09 04:02:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 1.020 0.936 0.862 2012-Jan-09 04:02:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.026 0.954 0.027 2012-Jan-09 04:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 04:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 04:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 04:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 04:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 04:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 04:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 04:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 04:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 04:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 04:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 04:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 04:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.108 (still bad) 2012-Jan-09 04:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 04:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 04:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 04:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 04:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Jan-09 04:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Jan-09 04:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2012-Jan-09 04:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.107 (still bad) 2012-Jan-09 04:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2012-Jan-09 04:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2012-Jan-09 04:03:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:03:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.053 0.901 0.884 2012-Jan-09 04:03:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.918 0.965 1.024 1.108 2012-Jan-09 04:03:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 1.028 0.939 0.865 2012-Jan-09 04:03:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.095 0.025 0.952 0.025 2012-Jan-09 04:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Jan-09 04:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.104 (still bad) 2012-Jan-09 04:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Jan-09 04:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Jan-09 04:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.105 (still bad) 2012-Jan-09 04:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.109 (still bad) 2012-Jan-09 04:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 04:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 04:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.106 (still bad) 2012-Jan-09 04:04:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 04:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 04:04:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:04:16 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:04:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:04:16 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2012-Jan-09 04:04:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:04:16 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2012-Jan-09 04:04:16 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 04:04:16 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Jan-09 04:04:16 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 04:04:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 04:04:16 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 04:04:16 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2012-Jan-09 04:04:16 COMMAND run_command_line: EXECUTING command 41: 'ENDIF' 2012-Jan-09 04:04:16 COMMAND run_command_line: EXECUTING command 44: 'IF LSTSLEW(AGES3193_p3_140) < 105641 THEN' 2012-Jan-09 04:04:16 LOG3 is_if_valid: Current source data: up 100.8 13.5 UP - - 26 1.9 2012-Jan-09 04:04:16 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES3193_p3_140) < 105641 2012-Jan-09 04:04:16 INFO5 is_if_valid: Condition parsed as: 10.870655666666666 < 10.944722222222222 2012-Jan-09 04:04:16 COMMAND run_command_line: EXECUTING command 45: 'FIXEDDRIFT az=100.22 alfaangle=-76.6 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES3193_p3_140 ra=95300.00 dec=202430.00' 2012-Jan-09 04:04:16 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 04:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 04:04:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 04:04:17 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 100.22 -76.6 hcorcal 5 tracking no off lcorcal first 1 AGES3193_p3_140 95300.00 202430.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:04:17 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 04:04:17 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Jan-09 04:04:17 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_138' 2012-Jan-09 04:04:17 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 04:04:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES3193_p3_140} 2012-Jan-09 04:04:17 INFO3 fixed_driftmap: Sending telescope to Az = 100.22 and ZA = 14.98 2012-Jan-09 04:04:17 LOG3 track_source: Calling 'track_source AGES3193_p3_140 100.22 14.9776344205 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:04:17 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:04:17 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Jan-09 04:04:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_140} INFO {Slewing to source 'AGES3193_p3_140' ...} 2012-Jan-09 04:04:17 INFO1 track_source: Starting to track AGES3193_p3_140 2012-Jan-09 04:04:17 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_140" 2012-Jan-09 04:04:17 LOG3 vw_send: To DATATAKING: set ra 100.22 2012-Jan-09 04:04:17 LOG3 vw_send: To DATATAKING: set dec 14.9776344205 2012-Jan-09 04:04:17 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:04:17 LOG3 vw_send: To DATATAKING: pnt tr 100.22 14.9776344205 -CF 2012-Jan-09 04:04:17 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:04:17 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:04:17 LOG5 finish_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Jan-09 04:04:17 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:04:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:04:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:04:17 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2012-Jan-09 04:04:17 START begin_task: Starting task 'rotate ALFA to -76.6 degrees' 2012-Jan-09 04:04:17 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Jan-09 04:04:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -76.6 degrees ...} 2012-Jan-09 04:04:17 INFO2 rotate_alfa: ALFA commanded to -76.6 degrees 2012-Jan-09 04:04:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION -76.6 REPLY 2012-Jan-09 04:04:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 04:04:17 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 04:04:17 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_140" 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: set ra 100.22 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: set dec 14.9776344205 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: vw% 100.22 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: vw% 14.9776344205 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: pnt tr 100.22 14.9776344205 -CF 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:04:17 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:04:23 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 04:04:23 INFO3 alfa_motor: ALFA rotator in-position -76.60 degrees 2012-Jan-09 04:04:23 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 04:04:23 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2012-Jan-09 04:04:23 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:04:23 STOP finish_task: Finishing task 'rotate ALFA to -76.6 degrees' 2012-Jan-09 04:04:23 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Jan-09 04:04:23 INFO2 finish_task: DONE finished configuration: rotating ALFA to -76.6 degrees 2012-Jan-09 04:04:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:04:23 STOP end_task: Finishing task 'rotate ALFA to -76.6 degrees' with status 'OK' 2012-Jan-09 04:04:23 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2012-Jan-09 04:04:23 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 04:04:23 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Jan-09 04:04:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 04:04:23 LOG3 waittrk: Start waittrk 5 2012-Jan-09 04:04:23 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 04:04:23 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Jan-09 04:04:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 04:04:28 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2012-Jan-09 04:04:28 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 04:04:28 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Jan-09 04:06:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 04:06:55 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2012-Jan-09 04:06:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:06:55 INFO2 waittrk: Now tracking AGES3193_p3_140 2012-Jan-09 04:06:55 LOG4 waittrk: Current telescope position: Az = 99.96 ZA = 14.99 2012-Jan-09 04:06:55 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 04:06:55 LOG5 finish_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Jan-09 04:06:55 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 04:06:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:06:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 04:06:55 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2012-Jan-09 04:06:55 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 04:06:55 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Jan-09 04:06:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 04:06:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 04:06:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:06:55 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 04:06:55 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2012-Jan-09 04:06:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 04:06:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:06:56 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 04:06:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 04:06:56 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2012-Jan-09 04:06:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 04:06:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:06:56 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 04:06:56 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:06:56 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Jan-09 04:06:56 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:06:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:06:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:06:57 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2012-Jan-09 04:06:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:06:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 04:06:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:06:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:06:57 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:06:57 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Jan-09 04:06:57 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:06:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:06:57 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2012-Jan-09 04:06:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:06:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:06:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 04:06:57 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2012-Jan-09 04:06:57 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Jan-09 04:06:57 INFO2 astwait: Waiting for 156 seconds from 08:06:57 to 08:09:33 UTC ... 2012-Jan-09 04:06:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 156 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 04:06:57 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Jan-09 04:06:57 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Jan-09 04:09:33 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 INFO3 astwait: Finished waiting 2012-Jan-09 04:09:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:09:33 LOG5 dopset_later: Calling 'dopset_later 61.466783838755191' 2012-Jan-09 04:09:33 INFO3 dopset_later: Setting Doppler correction for 04:10:33 (61.5 seconds from now) 2012-Jan-09 04:09:33 LOG5 antvel: Calling 'antvel 100.220000 14.977634 F Heliocentric 61.466783838755191' 2012-Jan-09 04:09:33 LOG2 antvel: Transforming current Az = 100.22 ZA = 14.98 to apparent RA = 09:53:42.2 Dec = +20:20:50.0 2012-Jan-09 04:09:33 LOG2 antvel: Parameters to Doppler: Heliocentric 29433 2012 9 0.0 2012-Jan-09 04:09:33 INFO5 antvel: Computed antenna velocity: -17.21762 km/s 2012-Jan-09 04:09:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-17.217624176600001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 04:09:33 INFO4 dopset_gen: New sky frequencies: 1381.322760 1381.322760 1381.322760 1381.322760 1381.322760 1381.322760 1381.322760 1381.322760 1381.322760 2012-Jan-09 04:09:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.322760 sky0=1381.322760 sky1=1381.322760 sky2=1381.322760 sky3=1381.322760 sky4=1381.322760 sky5=1381.322760 sky6=1381.322760 sky7=1381.322760 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 04:09:33 LOG2 dopset_gen: Result from 'sky2syn': 1631.322760 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631322760.0} 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 04:09:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 04:09:33 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 04:09:33 INFO5 fixed_driftmap: Tracking J2000 position: RA = 09:52:03.6 Dec = +20:24:14.6 2012-Jan-09 04:09:33 LOG3 track_source: Calling 'track_source AGES3193_p3_140 095203.6 202414.6 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:09:33 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:09:33 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_140} INFO {Slewing to source 'AGES3193_p3_140' ...} 2012-Jan-09 04:09:33 INFO1 track_source: Starting to track AGES3193_p3_140 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_140" 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: set ra 095203.6 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: set dec 202414.6 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: pnt tr 095203.6 202414.6 -CJ 2012-Jan-09 04:09:33 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:09:33 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:09:33 LOG5 finish_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:09:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:09:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:09:33 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 04:09:33 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 04:09:33 LOG3 waittrk: Start waittrk 5 2012-Jan-09 04:09:33 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 04:09:33 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631322760.0} 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_140" 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: set ra 095203.6 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: set dec 202414.6 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: pnt tr 095203.6 202414.6 -CJ 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: 095203.6 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: vw% 202414.6 2012-Jan-09 04:09:33 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Jan-09 04:09:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 04:09:38 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2012-Jan-09 04:09:38 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 04:09:38 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Jan-09 04:09:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 04:09:40 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2012-Jan-09 04:09:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:09:40 INFO2 waittrk: Now tracking AGES3193_p3_140 2012-Jan-09 04:09:40 LOG4 waittrk: Current telescope position: Az = 99.94 ZA = 15.00 2012-Jan-09 04:09:40 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 04:09:40 LOG5 finish_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Jan-09 04:09:40 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 04:09:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:09:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 04:09:40 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2012-Jan-09 04:09:40 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 04:09:40 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Jan-09 04:09:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 04:09:40 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 04:09:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 04:09:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 04:09:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:09:40 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 04:09:40 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Jan-09 04:09:41 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 04:09:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:09:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:43 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 04:09:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 04:09:43 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2012-Jan-09 04:09:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 04:09:43 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 04:09:43 LOG5 begin_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Jan-09 04:09:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 04:09:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:09:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:09:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:09:43 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:09:43 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 04:09:43 LOG5 begin_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Jan-09 04:09:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 04:09:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Jan-09 04:09:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 4 dB 2012-Jan-09 04:09:44 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2012-Jan-09 04:09:44 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2012-Jan-09 04:09:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 04:09:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 04:09:44 LOG5 end_task: Level: (5) ID = <10168> Status = 0 0 0 0 ok 2012-Jan-09 04:09:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.120 1.091 ALFA beam 1: 0.937 0.918 2012-Jan-09 04:09:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.973 1.028 ALFA beam 3: 1.068 0.914 2012-Jan-09 04:09:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.836 1.075 ALFA beam 5: 1.006 0.918 2012-Jan-09 04:09:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.912 0.014 ALFA beam 7: 0.993 0.014 2012-Jan-09 04:09:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 04:09:44 LOG5 finish_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Jan-09 04:09:44 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 04:09:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:09:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 04:09:44 LOG5 end_task: Level: (4) ID = <10167> Status = 0 0 0 0 ok 2012-Jan-09 04:09:44 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 04:09:44 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Jan-09 04:09:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 04:09:44 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 04:09:44 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 04:09:44 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 04:09:44 LOG5 begin_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Jan-09 04:09:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 04:09:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.091 0.937 0.918 2012-Jan-09 04:09:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.028 1.068 0.914 2012-Jan-09 04:09:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.075 1.006 0.918 2012-Jan-09 04:09:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.014 0.993 0.014 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.9 28.1 B 30.6 30.7 mn:A 0.1 -0.0 B -0.4 -0.3 gn: 11 11 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b0s1g0 rms:A 34.9 33.4 B 31.6 33.5 mn:A 0.1 -0.4 B -0.5 0.1 gn: 12 11 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.1 29.1 B 32.9 28.7 mn:A 0.6 0.6 B 0.1 0.1 gn: 7 11 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.6 29.2 B 32.3 32.4 mn:A -0.3 -0.4 B 0.5 0.2 gn: 8 10 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.6 28.7 B 28.8 30.1 mn:A -0.1 -0.3 B 0.4 0.0 gn: 10 11 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.6 31.9 B 30.2 28.1 mn:A 0.3 -0.3 B 0.1 0.3 gn: 11 11 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.1 28.9 B 31.5 28.1 mn:A 0.4 -0.4 B -0.1 -0.2 gn: 12 12 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b3s1g0 rms:A 31.9 31.1 B 31.0 32.4 mn:A -0.3 0.3 B 0.1 0.2 gn: 12 12 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.5 29.6 B 31.2 31.4 mn:A -0.3 -0.3 B -0.5 -0.0 gn: 13 12 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b4s1g0 rms:A 33.6 30.4 B 31.6 30.5 mn:A 0.1 0.0 B -0.3 0.2 gn: 16 13 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.3 29.2 B 28.5 28.5 mn:A 0.6 0.4 B 0.0 0.5 gn: 12 10 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b5s1g0 rms:A 31.7 31.5 B 30.3 30.1 mn:A -0.3 0.2 B 0.1 0.2 gn: 12 10 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.6 27.1 B 15.3 15.8 mn:A -0.4 0.2 B 0.4 -0.3 gn: 12 31 2012-Jan-09 04:09:51 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.3 28.4 B 12.4 12.1 mn:A 0.6 0.6 B 0.0 0.2 gn: 13 31 2012-Jan-09 04:09:51 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 04:09:51 LOG5 end_task: Level: (5) ID = <10170> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 04:09:51 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 04:09:51 LOG5 finish_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 04:09:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:09:51 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 04:09:51 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 04:09:51 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 04:09:51 LOG5 finish_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 04:09:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:09:51 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 04:09:51 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 04:09:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 04:09:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 04:09:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 04:09:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 04:09:51 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 04:09:51 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 04:09:51 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 04:09:51 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 04:09:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 04:09:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:09:51 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 04:09:51 LOG5 begin_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Jan-09 04:09:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 04:09:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 04:09:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:52 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (5) ID = <10173> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 04:09:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:09:52 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 04:09:52 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:09:52 LOG5 begin_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:09:52 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (5) ID = <10174> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:09:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 04:09:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:09:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:09:52 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:09:52 LOG5 begin_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (5) ID = <10175> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:09:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 04:09:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 04:09:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 04:09:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 04:09:52 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 04:09:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 04:09:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 04:09:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 04:09:52 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 04:09:52 LOG5 log_alfabeam: Parameters: 9.8676666666666684 20.404055555555555 10.932857 2012.0251157248965 -76.600044 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666670 20.404055555555551 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 1 9.866055956707045 20.494079963644559 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 2 9.860441796057964 20.434115277178822 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 3 9.862080273152484 20.343785755768749 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 4 9.869312891248548 20.314330688124642 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 5 9.874892523432649 20.374210789817106 2012-Jan-09 04:09:52 LOG4 log_alfabeam: ALFABEAM 6 9.873273879923785 20.463630886759180 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_140 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: patternid=200900106 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: scanid=200900107 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322760.0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322760.0 2012-Jan-09 04:09:52 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 04:09:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 04:09:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_140:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900106:scanid=200900107:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322760.0:topobfreqhz=1306322760.0:filetype=1 2012-Jan-09 04:09:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 04:09:52 LOG5 begin_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (5) ID = <10178> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 04:09:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 04:09:52 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 04:09:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 04:09:52 LOG5 begin_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0003.fits 2012-Jan-09 04:09:52 LOG4 from_mock: From MOCK: starok 2012-Jan-09 04:09:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 04:09:52 LOG5 end_task: Level: (5) ID = <10179> Status = 0 0 0 0 ok 2012-Jan-09 04:09:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 04:09:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900107 2012-Jan-09 04:09:53 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 04:09:53 LOG5 begin_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Jan-09 04:09:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120109.a2048.0003.fits} 2012-Jan-09 04:09:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 04:09:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 04:09:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 04:09:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 04:09:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29394.00 2012-Jan-09 04:09:55 INFO2 got_mock_message: Mock spectrometer start file number is 00900 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 04:09:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 04:09:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:09:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:09:58.02 2012-Jan-09 04:09:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326096598.02 Mon Jan 9 04:09:58 2012 2012-Jan-09 04:09:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322760 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 04:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.460 (still bad) 2012-Jan-09 04:09:59 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 04:09:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:09:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:09:59 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:04 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:10:04 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:10:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:10:04 LOG5 end_task: Level: (5) ID = <10180> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:10:04 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 04:10:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 04:10:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 04:10:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 04:10:04 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 04:10:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 04:10:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 04:10:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 04:10:04 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 04:10:04 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 04:10:04 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 04:10:04 LOG5 log_alfabeam: Parameters: 9.8676666666666684 20.404055555555555 10.935920 2012.0251160734656 -76.600044 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 0 9.867666666666672 20.404055555555555 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 1 9.866052581662300 20.494067771043863 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 2 9.860440684674227 20.434062230566003 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 3 9.862082469839102 20.343746048935085 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 4 9.869316140043081 20.314342235727253 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 5 9.874893617653298 20.374263003269078 2012-Jan-09 04:10:04 LOG4 log_alfabeam: ALFABEAM 6 9.873271659447532 20.463672694779099 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_140 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: patternid=200900106 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: scanid=200900108 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322760.0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322760.0 2012-Jan-09 04:10:04 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 04:10:04 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 04:10:04 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_140:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900106:scanid=200900108:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322760.0:topobfreqhz=1306322760.0:filetype=1 2012-Jan-09 04:10:04 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 04:10:04 LOG5 begin_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 04:10:04 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 04:10:04 LOG5 end_task: Level: (5) ID = <10183> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 04:10:04 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 04:10:04 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 04:10:04 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 04:10:04 LOG5 begin_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG4 from_mock: From MOCK: starok 2012-Jan-09 04:10:04 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 04:10:04 LOG5 end_task: Level: (5) ID = <10184> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 04:10:04 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900108 2012-Jan-09 04:10:04 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 04:10:04 LOG5 begin_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Jan-09 04:10:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 04:10:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 04:10:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29405.00 2012-Jan-09 04:10:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 04:10:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 04:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.543 (still bad) 2012-Jan-09 04:10:07 INFO2 got_mock_message: Mock spectrometer start file number is 01000 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 04:10:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 04:10:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:10:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:10:10.01 2012-Jan-09 04:10:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326096610.01 Mon Jan 9 04:10:10 2012 2012-Jan-09 04:10:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322760 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 04:10:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:10 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 04:10:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Jan-09 04:10:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:10:16 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:10:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:10:16 LOG5 end_task: Level: (5) ID = <10185> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:10:16 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 04:10:16 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 04:10:16 LOG5 finish_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 04:10:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:10:16 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 04:10:16 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 04:10:16 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 100.22 and ZA = 14.98 2012-Jan-09 04:10:16 LOG3 track_source: Calling 'track_source AGES3193_p3_140 100.22 14.9776344205 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:10:16 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:10:16 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES3193_p3_140} INFO {Slewing to source 'AGES3193_p3_140' ...} 2012-Jan-09 04:10:16 INFO1 track_source: Starting to track AGES3193_p3_140 2012-Jan-09 04:10:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES3193_p3_140" 2012-Jan-09 04:10:16 LOG3 vw_send: To DATATAKING: set ra 100.22 2012-Jan-09 04:10:16 LOG3 vw_send: To DATATAKING: set dec 14.9776344205 2012-Jan-09 04:10:16 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:10:16 LOG3 vw_send: To DATATAKING: pnt tr 100.22 14.9776344205 -CF 2012-Jan-09 04:10:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:10:16 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:10:16 LOG5 finish_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:10:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:10:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:10:16 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 LOG1 fixed_driftmap: Parameters: HA = +01:02:57.5 Start = 10:56:39.9 LST = 10:56:21.3 diff = 18.5 secs 2012-Jan-09 04:10:16 INFO2 fixed_driftmap: Waiting 16.5 seconds for RA 9:53:42 2012-Jan-09 04:10:16 INFO2 lstwait: Waiting for 16.5 secs from LST 10:56:21 to LST 10:56:38 ... 2012-Jan-09 04:10:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.472771841635225 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 04:10:16 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 04:10:16 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES3193_p3_140" 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: set ra 100.22 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: set dec 14.9776344205 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: vw% 100.22 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: vw% 14.9776344205 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: pnt tr 100.22 14.9776344205 -CF 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.120 (still bad) 2012-Jan-09 04:10:32 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 04:10:32 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG4 lstwait: Finished waiting 0.53 seconds late 2012-Jan-09 04:10:33 INFO3 lstwait: Finished waiting 2012-Jan-09 04:10:33 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:10:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 04:10:33 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 04:10:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 04:10:33 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 04:10:33 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 04:10:33 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 04:10:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: object=AGES3193_p3_140 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: patternid=200900109 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: scanid=200900109 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456322760.0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306322760.0 2012-Jan-09 04:10:33 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 04:10:33 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 04:10:33 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES3193_p3_140:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900109:scanid=200900109:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456322760.0:topobfreqhz=1306322760.0:filetype=1 2012-Jan-09 04:10:33 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 04:10:33 LOG5 begin_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 04:10:33 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 04:10:33 LOG5 end_task: Level: (4) ID = <10189> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 04:10:33 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 04:10:33 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 04:10:33 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 04:10:33 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG4 from_mock: From MOCK: starok 2012-Jan-09 04:10:33 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 04:10:33 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 04:10:33 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900109 2012-Jan-09 04:10:33 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 04:10:33 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Jan-09 04:10:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 04:10:33 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 04:10:33 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 04:10:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 04:10:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29434.00 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.322760 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 04:10:35 INFO2 got_mock_message: Mock spectrometer start file number is 01100 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 04:10:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 04:10:35 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:10:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.322760 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.119 (still bad) 2012-Jan-09 04:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.121 (still bad) 2012-Jan-09 04:10:38 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:10:38.01 2012-Jan-09 04:10:38 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326096638.01 Mon Jan 9 04:10:38 2012 2012-Jan-09 04:10:38 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 04:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:10:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:10:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.086 0.937 0.915 2012-Jan-09 04:10:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.972 1.028 1.060 0.910 2012-Jan-09 04:10:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.071 1.001 0.915 2012-Jan-09 04:10:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.026 0.993 0.027 2012-Jan-09 04:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2012-Jan-09 04:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 04:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 04:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 04:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 04:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 04:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Jan-09 04:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2012-Jan-09 04:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:11:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:11:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.089 0.939 0.920 2012-Jan-09 04:11:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.032 1.063 0.912 2012-Jan-09 04:11:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.073 1.003 0.917 2012-Jan-09 04:11:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.026 0.996 0.027 2012-Jan-09 04:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Jan-09 04:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:12:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:12:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 1.086 0.935 0.916 2012-Jan-09 04:12:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.979 1.036 1.068 0.919 2012-Jan-09 04:12:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.840 1.079 1.004 0.924 2012-Jan-09 04:12:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.025 1.001 0.025 2012-Jan-09 04:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 04:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 04:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 04:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 04:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 04:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 04:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 04:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 04:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 04:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 04:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 04:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 04:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2012-Jan-09 04:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2012-Jan-09 04:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.131 (still bad) 2012-Jan-09 04:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:13:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Jan-09 04:13:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 1.087 0.935 0.916 2012-Jan-09 04:13:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.978 1.036 1.074 0.921 2012-Jan-09 04:13:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.082 1.007 0.923 2012-Jan-09 04:13:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.023 0.999 0.023 2012-Jan-09 04:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2012-Jan-09 04:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2012-Jan-09 04:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2012-Jan-09 04:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Jan-09 04:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2012-Jan-09 04:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Jan-09 04:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:14:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Jan-09 04:14:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.121 1.087 0.933 0.916 2012-Jan-09 04:14:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.973 1.029 1.062 0.913 2012-Jan-09 04:14:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.071 0.998 0.915 2012-Jan-09 04:14:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.024 0.995 0.024 2012-Jan-09 04:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Jan-09 04:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Jan-09 04:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Jan-09 04:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.120 (still bad) 2012-Jan-09 04:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.123 (still bad) 2012-Jan-09 04:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Jan-09 04:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Jan-09 04:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Jan-09 04:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2012-Jan-09 04:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2012-Jan-09 04:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:15:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:15:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.086 0.934 0.914 2012-Jan-09 04:15:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.029 1.057 0.910 2012-Jan-09 04:15:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.070 1.000 0.917 2012-Jan-09 04:15:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.026 0.993 0.027 2012-Jan-09 04:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2012-Jan-09 04:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Jan-09 04:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Jan-09 04:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.129 (still bad) 2012-Jan-09 04:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.128 (still bad) 2012-Jan-09 04:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.130 (still bad) 2012-Jan-09 04:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Jan-09 04:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Jan-09 04:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.131 (still bad) 2012-Jan-09 04:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Jan-09 04:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Jan-09 04:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Jan-09 04:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:16:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:16:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.083 0.934 0.914 2012-Jan-09 04:16:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.971 1.032 1.060 0.909 2012-Jan-09 04:16:56 LOG4 check_wapp_levels: WAPP-3 power levels: 0.831 1.069 0.997 0.914 2012-Jan-09 04:16:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.026 0.992 0.027 2012-Jan-09 04:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Jan-09 04:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 04:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Jan-09 04:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Jan-09 04:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2012-Jan-09 04:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:17:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:17:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.115 1.080 0.932 0.913 2012-Jan-09 04:17:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.029 1.058 0.909 2012-Jan-09 04:17:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.070 0.993 0.913 2012-Jan-09 04:17:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.026 0.997 0.027 2012-Jan-09 04:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.126 (still bad) 2012-Jan-09 04:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2012-Jan-09 04:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 04:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 04:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 04:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 04:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 04:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:18:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:18:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.079 0.935 0.912 2012-Jan-09 04:18:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.028 1.057 0.908 2012-Jan-09 04:18:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.070 0.998 0.914 2012-Jan-09 04:18:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.912 0.026 0.994 0.026 2012-Jan-09 04:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Jan-09 04:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Jan-09 04:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Jan-09 04:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Jan-09 04:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:20:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.082 0.934 0.915 2012-Jan-09 04:20:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.967 1.027 1.055 0.908 2012-Jan-09 04:20:00 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.067 0.991 0.912 2012-Jan-09 04:20:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.025 0.990 0.025 2012-Jan-09 04:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Jan-09 04:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Jan-09 04:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.116 (still bad) 2012-Jan-09 04:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.117 (still bad) 2012-Jan-09 04:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Jan-09 04:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Jan-09 04:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Jan-09 04:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Jan-09 04:21:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Jan-09 04:21:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.120 1.083 0.936 0.914 2012-Jan-09 04:21:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.026 1.056 0.908 2012-Jan-09 04:21:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.069 0.994 0.913 2012-Jan-09 04:21:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.909 0.024 0.990 0.024 2012-Jan-09 04:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2012-Jan-09 04:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Jan-09 04:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Jan-09 04:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Jan-09 04:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Jan-09 04:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.131 (still bad) 2012-Jan-09 04:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.125 (still bad) 2012-Jan-09 04:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:22:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:22:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.127 1.087 1.016 0.990 2012-Jan-09 04:22:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 1.030 1.058 0.910 2012-Jan-09 04:22:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.069 0.995 0.915 2012-Jan-09 04:22:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.026 0.993 0.026 2012-Jan-09 04:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Jan-09 04:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Jan-09 04:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Jan-09 04:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Jan-09 04:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Jan-09 04:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.123 (still bad) 2012-Jan-09 04:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Jan-09 04:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.129 (still bad) 2012-Jan-09 04:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Jan-09 04:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Jan-09 04:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Jan-09 04:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Jan-09 04:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.123 (still bad) 2012-Jan-09 04:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.127 (still bad) 2012-Jan-09 04:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Jan-09 04:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:23:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:23:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.085 0.935 0.916 2012-Jan-09 04:23:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.974 1.038 1.060 0.913 2012-Jan-09 04:23:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.072 1.000 0.919 2012-Jan-09 04:23:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.025 0.995 0.025 2012-Jan-09 04:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Jan-09 04:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.123 (still bad) 2012-Jan-09 04:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.124 (still bad) 2012-Jan-09 04:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Jan-09 04:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.128 (still bad) 2012-Jan-09 04:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:24:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:24:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.125 1.086 0.940 0.919 2012-Jan-09 04:24:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.031 1.066 0.918 2012-Jan-09 04:24:05 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.069 0.996 0.914 2012-Jan-09 04:24:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.026 0.994 0.026 2012-Jan-09 04:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2012-Jan-09 04:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Jan-09 04:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.119 (still bad) 2012-Jan-09 04:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2012-Jan-09 04:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2012-Jan-09 04:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.124 (still bad) 2012-Jan-09 04:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.126 (still bad) 2012-Jan-09 04:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.115 (still bad) 2012-Jan-09 04:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2012-Jan-09 04:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.118 (still bad) 2012-Jan-09 04:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.114 (still bad) 2012-Jan-09 04:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.116 (still bad) 2012-Jan-09 04:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 04:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 04:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Jan-09 04:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 04:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.113 (still bad) 2012-Jan-09 04:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 04:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.112 (still bad) 2012-Jan-09 04:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:25:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.086 0.943 0.922 2012-Jan-09 04:25:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.970 1.035 1.062 0.914 2012-Jan-09 04:25:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.076 1.001 0.919 2012-Jan-09 04:25:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.025 0.998 0.025 2012-Jan-09 04:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Jan-09 04:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 04:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 04:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.115 (still bad) 2012-Jan-09 04:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.114 (still bad) 2012-Jan-09 04:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 04:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 04:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:26:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.117 1.078 0.935 0.915 2012-Jan-09 04:26:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.031 1.056 0.908 2012-Jan-09 04:26:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.070 0.994 0.915 2012-Jan-09 04:26:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.910 0.026 0.992 0.026 2012-Jan-09 04:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.116 (still bad) 2012-Jan-09 04:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Jan-09 04:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:27:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 04:27:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.081 0.933 0.913 2012-Jan-09 04:27:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 1.030 1.069 0.919 2012-Jan-09 04:27:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.070 0.996 0.913 2012-Jan-09 04:27:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.026 0.992 0.026 2012-Jan-09 04:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Jan-09 04:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.124 (still bad) 2012-Jan-09 04:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.129 (still bad) 2012-Jan-09 04:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.122 (still bad) 2012-Jan-09 04:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Jan-09 04:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.128 (still bad) 2012-Jan-09 04:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.120 (still bad) 2012-Jan-09 04:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Jan-09 04:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:28:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:28:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.118 1.082 0.932 0.912 2012-Jan-09 04:28:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.031 1.056 0.909 2012-Jan-09 04:28:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.071 0.993 0.913 2012-Jan-09 04:28:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.025 0.992 0.025 2012-Jan-09 04:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Jan-09 04:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.119 (still bad) 2012-Jan-09 04:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.120 (still bad) 2012-Jan-09 04:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Jan-09 04:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.125 (still bad) 2012-Jan-09 04:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Jan-09 04:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.120 (still bad) 2012-Jan-09 04:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Jan-09 04:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Jan-09 04:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.123 (still bad) 2012-Jan-09 04:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.128 (still bad) 2012-Jan-09 04:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:29:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:29:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.084 0.933 0.916 2012-Jan-09 04:29:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.966 1.033 1.059 0.912 2012-Jan-09 04:29:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.074 0.994 0.915 2012-Jan-09 04:29:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.025 1.017 0.025 2012-Jan-09 04:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.124 (still bad) 2012-Jan-09 04:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.126 (still bad) 2012-Jan-09 04:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Jan-09 04:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.127 (still bad) 2012-Jan-09 04:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 04:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.127 (still bad) 2012-Jan-09 04:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.118 (still bad) 2012-Jan-09 04:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.121 (still bad) 2012-Jan-09 04:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.117 (still bad) 2012-Jan-09 04:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.119 (still bad) 2012-Jan-09 04:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.125 (still bad) 2012-Jan-09 04:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.122 (still bad) 2012-Jan-09 04:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:30:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.024 < 0.75)! 2012-Jan-09 04:30:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.086 0.933 0.917 2012-Jan-09 04:30:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 1.034 1.055 0.910 2012-Jan-09 04:30:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.069 0.991 0.913 2012-Jan-09 04:30:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.911 0.024 0.992 0.025 2012-Jan-09 04:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.118 (still bad) 2012-Jan-09 04:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.121 (still bad) 2012-Jan-09 04:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 04:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.117 (still bad) 2012-Jan-09 04:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 04:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 04:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 04:30:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:30:39 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:30:39 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:30:39 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:30:39 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2012-Jan-09 04:30:39 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:30:39 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2012-Jan-09 04:30:39 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 04:30:39 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Jan-09 04:30:39 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 04:30:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 04:30:39 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 04:30:39 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2012-Jan-09 04:30:39 COMMAND run_command_line: EXECUTING command 48: 'ENDIF' 2012-Jan-09 04:30:39 COMMAND run_command_line: EXECUTING command 51: 'IF LSTSLEW(AGES1367_p1_047) < 112438 THEN' 2012-Jan-09 04:30:40 LOG3 is_if_valid: Current source data: up 241.0 4.8 UP - - 101 5.9 2012-Jan-09 04:30:40 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_047) < 112438 2012-Jan-09 04:30:40 INFO5 is_if_valid: Condition parsed as: 11.378248333333334 < 11.410555555555556 2012-Jan-09 04:30:40 COMMAND run_command_line: EXECUTING command 52: 'FIXEDDRIFT az=225.81 alfaangle=-23.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_047 ra=113400.00 dec=204100.00' 2012-Jan-09 04:30:40 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 04:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 04:30:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 04:30:40 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 225.81 -23.1 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_047 113400.00 204100.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:30:40 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 04:30:40 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Jan-09 04:30:40 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES3193_p3_140' 2012-Jan-09 04:30:40 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 04:30:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_047} 2012-Jan-09 04:30:41 INFO3 fixed_driftmap: Sending telescope to Az = 225.81 and ZA = 3.26 2012-Jan-09 04:30:41 LOG3 track_source: Calling 'track_source AGES1367_p1_047 225.81 3.2639834024 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:30:41 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:30:41 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Jan-09 04:30:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_047} INFO {Slewing to source 'AGES1367_p1_047' ...} 2012-Jan-09 04:30:41 INFO1 track_source: Starting to track AGES1367_p1_047 2012-Jan-09 04:30:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_047" 2012-Jan-09 04:30:41 LOG3 vw_send: To DATATAKING: set ra 225.81 2012-Jan-09 04:30:41 LOG3 vw_send: To DATATAKING: set dec 3.2639834024 2012-Jan-09 04:30:41 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:30:41 LOG3 vw_send: To DATATAKING: pnt tr 225.81 3.2639834024 -CF 2012-Jan-09 04:30:41 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:30:41 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:30:41 LOG5 finish_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Jan-09 04:30:41 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:30:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:30:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:30:41 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2012-Jan-09 04:30:41 START begin_task: Starting task 'rotate ALFA to -23.1 degrees' 2012-Jan-09 04:30:41 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Jan-09 04:30:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -23.1 degrees ...} 2012-Jan-09 04:30:41 INFO2 rotate_alfa: ALFA commanded to -23.1 degrees 2012-Jan-09 04:30:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION -23.1 REPLY 2012-Jan-09 04:30:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 04:30:41 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 04:30:41 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_047" 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: set ra 225.81 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: set dec 3.2639834024 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: vw% 225.81 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: vw% 3.2639834024 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: pnt tr 225.81 3.2639834024 -CF 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:30:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:31:11 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 04:31:11 INFO3 alfa_motor: ALFA rotator in-position -23.10 degrees 2012-Jan-09 04:31:11 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 04:31:11 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2012-Jan-09 04:31:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:31:11 STOP finish_task: Finishing task 'rotate ALFA to -23.1 degrees' 2012-Jan-09 04:31:11 LOG5 finish_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Jan-09 04:31:11 INFO2 finish_task: DONE finished configuration: rotating ALFA to -23.1 degrees 2012-Jan-09 04:31:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:31:11 STOP end_task: Finishing task 'rotate ALFA to -23.1 degrees' with status 'OK' 2012-Jan-09 04:31:11 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2012-Jan-09 04:31:11 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 04:31:11 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Jan-09 04:31:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 04:31:11 LOG3 waittrk: Start waittrk 5 2012-Jan-09 04:31:11 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 04:31:11 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Jan-09 04:31:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 04:31:16 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2012-Jan-09 04:31:17 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 04:31:17 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Jan-09 04:35:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 04:35:53 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2012-Jan-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:35:53 INFO2 waittrk: Now tracking AGES1367_p1_047 2012-Jan-09 04:35:53 LOG4 waittrk: Current telescope position: Az = 225.07 ZA = 3.27 2012-Jan-09 04:35:53 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 04:35:53 LOG5 finish_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Jan-09 04:35:53 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 04:35:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:35:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 04:35:54 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2012-Jan-09 04:35:54 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 04:35:54 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Jan-09 04:35:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 04:35:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 04:35:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:35:54 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 04:35:54 LOG5 begin_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Jan-09 04:35:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 04:35:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:35:54 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:35:54 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 04:35:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 04:35:54 LOG5 end_task: Level: (4) ID = <10200> Status = 0 0 0 0 ok 2012-Jan-09 04:35:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 04:35:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:35:55 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 04:35:55 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:35:55 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Jan-09 04:35:55 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:35:55 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:35:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:35:55 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2012-Jan-09 04:35:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:35:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 04:35:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:35:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:35:55 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:35:55 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Jan-09 04:35:55 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:35:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:35:55 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2012-Jan-09 04:35:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:35:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:35:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 04:35:55 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2012-Jan-09 04:35:55 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Jan-09 04:35:55 INFO2 astwait: Waiting for 93 seconds from 08:35:55 to 08:37:28 UTC ... 2012-Jan-09 04:35:55 LOG4 send_obs_status: To obs_status: <1> TASKTIME 93 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 04:35:55 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Jan-09 04:35:55 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Jan-09 04:37:13 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 04:37:13.302 (seconds: 16633.302)!} 2012-Jan-09 04:37:13 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 04:37:13.302 (seconds: 16633.302)! 2012-Jan-09 04:37:28 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Jan-09 04:37:28 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2012-Jan-09 04:37:28 INFO3 astwait: Finished waiting 2012-Jan-09 04:37:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:37:28 LOG5 dopset_later: Calling 'dopset_later 61.326882431396079' 2012-Jan-09 04:37:28 INFO3 dopset_later: Setting Doppler correction for 04:38:28 (61.3 seconds from now) 2012-Jan-09 04:37:28 LOG5 antvel: Calling 'antvel 225.810000 3.263983 F Heliocentric 61.326882431396079' 2012-Jan-09 04:37:28 LOG2 antvel: Transforming current Az = 225.81 ZA = 3.26 to apparent RA = 11:34:39.1 Dec = +20:36:44.0 2012-Jan-09 04:37:28 LOG2 antvel: Parameters to Doppler: Heliocentric 31108 2012 9 0.0 2012-Jan-09 04:37:28 INFO5 antvel: Computed antenna velocity: -24.49703 km/s 2012-Jan-09 04:37:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.497032825800002 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 04:37:28 INFO4 dopset_gen: New sky frequencies: 1381.356304 1381.356304 1381.356304 1381.356304 1381.356304 1381.356304 1381.356304 1381.356304 1381.356304 2012-Jan-09 04:37:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.356304 sky0=1381.356304 sky1=1381.356304 sky2=1381.356304 sky3=1381.356304 sky4=1381.356304 sky5=1381.356304 sky6=1381.356304 sky7=1381.356304 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 04:37:28 LOG2 dopset_gen: Result from 'sky2syn': 1631.356304 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631356304.0} 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 04:37:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 04:37:28 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 04:37:28 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.1 Dec = +20:40:43.4 2012-Jan-09 04:37:28 LOG3 track_source: Calling 'track_source AGES1367_p1_047 113303.1 204043.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:37:28 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:37:28 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Jan-09 04:37:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_047} INFO {Slewing to source 'AGES1367_p1_047' ...} 2012-Jan-09 04:37:28 INFO1 track_source: Starting to track AGES1367_p1_047 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_047" 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: set ra 113303.1 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: set dec 204043.4 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: pnt tr 113303.1 204043.4 -CJ 2012-Jan-09 04:37:28 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:37:28 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:37:28 LOG5 finish_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Jan-09 04:37:28 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:37:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:37:28 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:37:28 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2012-Jan-09 04:37:28 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 04:37:28 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Jan-09 04:37:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 04:37:28 LOG3 waittrk: Start waittrk 5 2012-Jan-09 04:37:28 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 04:37:28 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631356304.0} 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_047" 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: set ra 113303.1 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: set dec 204043.4 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: vw% 113303.1 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: vw% 204043.4 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.1 204043.4 -CJ 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:37:33 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 04:37:33 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2012-Jan-09 04:37:33 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 04:37:33 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2012-Jan-09 04:37:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 04:37:40 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2012-Jan-09 04:37:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:37:40 INFO2 waittrk: Now tracking AGES1367_p1_047 2012-Jan-09 04:37:40 LOG4 waittrk: Current telescope position: Az = 224.67 ZA = 3.24 2012-Jan-09 04:37:40 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 04:37:40 LOG5 finish_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Jan-09 04:37:40 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 04:37:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:37:40 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 04:37:40 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2012-Jan-09 04:37:40 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 04:37:40 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Jan-09 04:37:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 04:37:40 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 04:37:40 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 04:37:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 04:37:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:37:40 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 04:37:40 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Jan-09 04:37:41 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 04:37:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:37:43 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:37:43 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 04:37:43 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 04:37:43 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2012-Jan-09 04:37:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 04:37:43 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 04:37:43 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Jan-09 04:37:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 04:37:43 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:37:43 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:37:43 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:37:44 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 04:37:44 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 04:37:44 LOG5 begin_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2012-Jan-09 04:37:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:37:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 04:37:44 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 5 dB 2012-Jan-09 04:37:44 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Jan-09 04:37:44 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 4 dB --- beam 3: 2 2 dB 2012-Jan-09 04:37:44 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Jan-09 04:37:44 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 04:37:44 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 04:37:44 LOG5 end_task: Level: (5) ID = <10211> Status = 0 0 0 0 ok 2012-Jan-09 04:37:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.054 1.032 ALFA beam 1: 1.106 1.127 2012-Jan-09 04:37:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.110 0.945 ALFA beam 3: 1.017 1.087 2012-Jan-09 04:37:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.803 0.973 ALFA beam 5: 1.112 1.032 2012-Jan-09 04:37:44 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.064 0.014 ALFA beam 7: 0.927 0.014 2012-Jan-09 04:37:44 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 04:37:44 LOG5 finish_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Jan-09 04:37:44 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 04:37:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:37:44 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 04:37:44 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2012-Jan-09 04:37:44 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 04:37:44 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Jan-09 04:37:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 04:37:44 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 04:37:44 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 04:37:44 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 04:37:44 LOG5 begin_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2012-Jan-09 04:37:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 04:37:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.032 1.106 1.127 2012-Jan-09 04:37:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.110 0.945 1.017 1.087 2012-Jan-09 04:37:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.803 0.973 1.112 1.032 2012-Jan-09 04:37:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.014 0.927 0.014 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.0 27.3 B 29.8 29.9 mn:A 0.0 -0.1 B -0.4 -0.3 gn: 11 11 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b0s1g0 rms:A 31.2 29.9 B 27.6 29.2 mn:A 0.1 -0.4 B -0.6 -0.1 gn: 12 11 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.1 28.2 B 32.6 28.5 mn:A 0.5 0.6 B 0.1 0.0 gn: 7 11 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b1s1g0 rms:A 29.5 27.2 B 30.8 30.8 mn:A -0.3 -0.2 B 0.6 0.3 gn: 8 10 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b2s0g0 rms:A 32.0 31.0 B 27.8 29.1 mn:A -0.0 -0.3 B 0.3 0.1 gn: 11 11 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b2s1g0 rms:A 29.1 29.4 B 32.0 29.7 mn:A 0.3 -0.3 B 0.1 0.2 gn: 11 12 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.6 28.4 B 30.9 27.6 mn:A 0.5 -0.4 B -0.1 -0.3 gn: 12 12 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b3s1g0 rms:A 29.9 29.1 B 29.1 30.3 mn:A -0.2 0.4 B 0.1 0.2 gn: 12 12 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b4s0g0 rms:A 29.9 29.0 B 29.8 29.9 mn:A -0.3 -0.3 B -0.4 0.0 gn: 13 12 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b4s1g0 rms:A 31.8 28.8 B 31.9 30.8 mn:A -0.0 -0.1 B -0.4 0.1 gn: 16 14 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.9 30.7 B 29.9 29.9 mn:A 0.8 0.4 B -0.1 0.5 gn: 13 11 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b5s1g0 rms:A 28.6 28.4 B 30.1 29.9 mn:A -0.2 0.1 B 0.0 0.0 gn: 12 11 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.1 29.4 B 15.3 15.7 mn:A -0.4 0.2 B 0.4 -0.3 gn: 13 31 2012-Jan-09 04:37:51 INFO3 from_mock: From MOCK: b6s1g0 rms:A 32.6 29.6 B 12.2 11.9 mn:A 0.7 0.6 B 0.1 0.2 gn: 14 31 2012-Jan-09 04:37:51 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 04:37:51 LOG5 end_task: Level: (5) ID = <10213> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 04:37:51 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 04:37:51 LOG5 finish_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 04:37:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:37:51 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 04:37:51 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 04:37:51 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 04:37:51 LOG5 finish_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 04:37:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:37:51 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 04:37:51 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 04:37:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 04:37:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 04:37:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 04:37:51 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 04:37:51 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 04:37:51 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 04:37:51 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 04:37:51 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2012-Jan-09 04:37:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 04:37:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 04:37:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:37:52 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 04:37:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 04:37:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 04:37:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:37:52 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (5) ID = <10216> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 04:37:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:37:52 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 04:37:52 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:37:52 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (5) ID = <10217> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:37:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 04:37:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 04:37:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:37:52 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (5) ID = <10218> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 04:37:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 04:37:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 04:37:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 04:37:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 04:37:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 04:37:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 04:37:52 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 04:37:52 LOG5 log_alfabeam: Parameters: 11.550861111111113 20.678722222222223 11.400801 2012.0251689608842 -23.100063 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 0 11.550861111111104 20.678722222222238 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 1 11.551136288386216 20.582167046669145 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 2 11.557181687047759 20.646430882780589 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 3 11.556815164528890 20.744750236804474 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 4 11.550354888687099 20.776194769249301 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 5 11.544535358443609 20.707850265921902 2012-Jan-09 04:37:52 LOG4 log_alfabeam: ALFABEAM 6 11.544946538797280 20.612104240966403 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_047 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: patternid=200900109 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: scanid=200900110 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456356304.0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306356304.0 2012-Jan-09 04:37:52 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 04:37:52 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 04:37:52 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_047:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900109:scanid=200900110:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456356304.0:topobfreqhz=1306356304.0:filetype=1 2012-Jan-09 04:37:52 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (5) ID = <10221> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 04:37:52 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 04:37:52 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 04:37:52 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 04:37:52 LOG5 begin_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0004.fits 2012-Jan-09 04:37:52 LOG4 from_mock: From MOCK: starok 2012-Jan-09 04:37:52 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 04:37:52 LOG5 end_task: Level: (5) ID = <10222> Status = 0 0 0 0 ok 2012-Jan-09 04:37:52 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 04:37:52 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900110 2012-Jan-09 04:37:53 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 04:37:53 LOG5 begin_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2012-Jan-09 04:37:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120109.a2048.0004.fits} 2012-Jan-09 04:37:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 04:37:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 04:37:53 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 04:37:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 04:37:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31074.00 2012-Jan-09 04:37:55 INFO2 got_mock_message: Mock spectrometer start file number is 01200 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 04:37:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 04:37:55 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:55 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:37:58 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:37:58.02 2012-Jan-09 04:37:58 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326098278.02 Mon Jan 9 04:37:58 2012 2012-Jan-09 04:37:58 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.356304 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 04:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.561 (still bad) 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 04:37:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:37:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:38:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:38:04 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:38:04 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:38:04 LOG5 end_task: Level: (5) ID = <10223> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:38:04 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 04:38:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 04:38:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 04:38:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 04:38:04 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 04:38:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 04:38:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 04:38:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 04:38:04 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 04:38:04 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 04:38:04 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 04:38:04 LOG5 log_alfabeam: Parameters: 11.550861111111113 20.678722222222223 11.403865 2012.0251693094531 -23.100063 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 0 11.550861111111114 20.678722222222238 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 1 11.551202361792782 20.582213983811961 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 2 11.557203857805806 20.647284125750481 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 3 11.556769065245479 20.745560992976387 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 4 11.550285869150125 20.776124650354788 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 5 11.544515413962639 20.706966421202008 2012-Jan-09 04:38:04 LOG4 log_alfabeam: ALFABEAM 6 11.544993372572248 20.611293716050412 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_047 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: patternid=200900109 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: scanid=200900111 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456356304.0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306356304.0 2012-Jan-09 04:38:04 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 04:38:04 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 04:38:04 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_047:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900109:scanid=200900111:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456356304.0:topobfreqhz=1306356304.0:filetype=1 2012-Jan-09 04:38:04 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 04:38:04 LOG5 begin_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 04:38:04 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 04:38:04 LOG5 end_task: Level: (5) ID = <10226> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 04:38:04 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 04:38:04 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 04:38:04 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 04:38:04 LOG5 begin_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG4 from_mock: From MOCK: starok 2012-Jan-09 04:38:04 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 04:38:04 LOG5 end_task: Level: (5) ID = <10227> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 04:38:04 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900111 2012-Jan-09 04:38:04 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 04:38:04 LOG5 begin_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2012-Jan-09 04:38:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 04:38:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 04:38:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31085.00 2012-Jan-09 04:38:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 04:38:05 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 04:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.561 (still bad) 2012-Jan-09 04:38:07 INFO2 got_mock_message: Mock spectrometer start file number is 01300 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 04:38:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 04:38:07 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:07 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 04:38:10 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:38:10.01 2012-Jan-09 04:38:10 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326098290.01 Mon Jan 9 04:38:10 2012 2012-Jan-09 04:38:10 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.356304 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 04:38:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:38:10 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 04:38:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Jan-09 04:38:15 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:38:16 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:38:16 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:38:16 LOG5 end_task: Level: (5) ID = <10228> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:38:16 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 04:38:16 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 04:38:16 LOG5 finish_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 04:38:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:38:16 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 04:38:16 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 04:38:16 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 225.81 and ZA = 3.26 2012-Jan-09 04:38:16 LOG3 track_source: Calling 'track_source AGES1367_p1_047 225.81 3.2639834024 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:38:16 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:38:16 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_047} INFO {Slewing to source 'AGES1367_p1_047' ...} 2012-Jan-09 04:38:16 INFO1 track_source: Starting to track AGES1367_p1_047 2012-Jan-09 04:38:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_047" 2012-Jan-09 04:38:16 LOG3 vw_send: To DATATAKING: set ra 225.81 2012-Jan-09 04:38:16 LOG3 vw_send: To DATATAKING: set dec 3.2639834024 2012-Jan-09 04:38:16 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:38:16 LOG3 vw_send: To DATATAKING: pnt tr 225.81 3.2639834024 -CF 2012-Jan-09 04:38:16 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:38:16 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:38:16 LOG5 finish_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:38:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:38:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:38:16 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 LOG1 fixed_driftmap: Parameters: HA = -00:10:00.0 Start = 11:24:39.3 LST = 11:24:25.9 diff = 13.4 secs 2012-Jan-09 04:38:16 INFO2 fixed_driftmap: Waiting 11.4 seconds for RA 11:34:39 2012-Jan-09 04:38:16 INFO2 lstwait: Waiting for 11.3 secs from LST 11:24:26 to LST 11:24:37 ... 2012-Jan-09 04:38:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 11.331762844195394 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 04:38:16 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 04:38:16 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_047" 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: set ra 225.81 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: set dec 3.2639834024 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: vw% 225.81 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: vw% 3.2639834024 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: pnt tr 225.81 3.2639834024 -CF 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Jan-09 04:38:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 04:38:27 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2012-Jan-09 04:38:27 LOG4 lstwait: Finished waiting 0.67 seconds late 2012-Jan-09 04:38:27 INFO3 lstwait: Finished waiting 2012-Jan-09 04:38:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:38:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 04:38:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 04:38:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 04:38:27 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 04:38:27 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 04:38:27 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2012-Jan-09 04:38:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 04:38:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_047 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: patternid=200900112 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: scanid=200900112 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456356304.0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306356304.0 2012-Jan-09 04:38:28 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 04:38:28 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 04:38:28 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_047:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900112:scanid=200900112:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456356304.0:topobfreqhz=1306356304.0:filetype=1 2012-Jan-09 04:38:28 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 04:38:28 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Jan-09 04:38:28 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 04:38:28 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 04:38:28 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2012-Jan-09 04:38:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 04:38:28 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 04:38:28 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 04:38:28 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 04:38:28 LOG5 begin_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Jan-09 04:38:28 LOG4 from_mock: From MOCK: starok 2012-Jan-09 04:38:28 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 04:38:28 LOG5 end_task: Level: (4) ID = <10233> Status = 0 0 0 0 ok 2012-Jan-09 04:38:28 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 04:38:28 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900112 2012-Jan-09 04:38:28 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 04:38:28 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2012-Jan-09 04:38:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 04:38:28 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 04:38:28 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 04:38:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 04:38:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31109.00 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.356304 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 04:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.356304 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 04:38:30 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2012-Jan-09 04:38:30 INFO2 got_mock_message: Mock spectrometer start file number is 01400 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 04:38:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Jan-09 04:38:30 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 04:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.132 (still bad) 2012-Jan-09 04:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:38:33 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 04:38:33.00 2012-Jan-09 04:38:33 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326098313.00 Mon Jan 9 04:38:33 2012 2012-Jan-09 04:38:33 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 04:38:33 NOTE WAPP=1+2+3+4-start_spectra: Observing now on source 2012-Jan-09 04:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:38:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:38:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 1.030 1.114 1.128 2012-Jan-09 04:38:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 0.944 1.025 1.090 2012-Jan-09 04:38:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.803 0.977 1.117 1.052 2012-Jan-09 04:38:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.027 0.925 0.028 2012-Jan-09 04:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 04:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 04:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 04:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 04:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 04:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2012-Jan-09 04:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:39:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:39:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.033 1.113 1.129 2012-Jan-09 04:39:49 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 0.946 1.023 1.086 2012-Jan-09 04:39:49 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.981 1.119 1.054 2012-Jan-09 04:39:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.027 0.927 0.027 2012-Jan-09 04:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 04:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 04:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 04:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 04:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 04:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.151 (still bad) 2012-Jan-09 04:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.154 (still bad) 2012-Jan-09 04:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 04:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.139 (still bad) 2012-Jan-09 04:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.134 (still bad) 2012-Jan-09 04:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.135 (still bad) 2012-Jan-09 04:40:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Jan-09 04:40:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.032 1.117 1.138 2012-Jan-09 04:40:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 0.945 1.022 1.087 2012-Jan-09 04:40:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.806 0.976 1.122 1.054 2012-Jan-09 04:40:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.023 0.929 0.023 2012-Jan-09 04:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.137 (still bad) 2012-Jan-09 04:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.139 (still bad) 2012-Jan-09 04:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.144 (still bad) 2012-Jan-09 04:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.138 (still bad) 2012-Jan-09 04:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2012-Jan-09 04:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2012-Jan-09 04:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.135 (still bad) 2012-Jan-09 04:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.134 (still bad) 2012-Jan-09 04:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 04:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 04:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:41:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:41:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.035 1.115 1.135 2012-Jan-09 04:41:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 0.946 1.022 1.088 2012-Jan-09 04:41:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.807 0.978 1.122 1.054 2012-Jan-09 04:41:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.027 0.927 0.027 2012-Jan-09 04:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 04:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 04:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.164 (still bad) 2012-Jan-09 04:42:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:42:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.036 1.118 1.136 2012-Jan-09 04:42:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.172 0.996 1.025 1.090 2012-Jan-09 04:42:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.809 0.979 1.120 1.055 2012-Jan-09 04:42:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.027 0.927 0.027 2012-Jan-09 04:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.179 (still bad) 2012-Jan-09 04:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.181 (still bad) 2012-Jan-09 04:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.174 (still bad) 2012-Jan-09 04:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.166 (still bad) 2012-Jan-09 04:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.155 (still bad) 2012-Jan-09 04:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 04:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 04:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.134 (still bad) 2012-Jan-09 04:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.133 (still bad) 2012-Jan-09 04:43:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:43:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 1.039 1.118 1.135 2012-Jan-09 04:43:54 LOG4 check_wapp_levels: WAPP-2 power levels: 1.117 0.947 1.024 1.089 2012-Jan-09 04:43:54 LOG4 check_wapp_levels: WAPP-3 power levels: 0.812 0.978 1.129 1.059 2012-Jan-09 04:43:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.027 0.928 0.027 2012-Jan-09 04:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 04:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 04:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 04:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 04:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 04:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:44:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 04:44:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.039 1.115 1.138 2012-Jan-09 04:44:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.124 0.949 1.025 1.089 2012-Jan-09 04:44:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.814 0.979 1.120 1.056 2012-Jan-09 04:44:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.027 0.928 0.027 2012-Jan-09 04:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 04:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.140 (still bad) 2012-Jan-09 04:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 04:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 04:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 04:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 04:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Jan-09 04:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Jan-09 04:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 04:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.137 (still bad) 2012-Jan-09 04:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Jan-09 04:45:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 04:45:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.060 1.042 1.122 1.143 2012-Jan-09 04:45:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 0.953 1.029 1.095 2012-Jan-09 04:45:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.816 0.987 1.128 1.063 2012-Jan-09 04:45:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.025 0.930 0.025 2012-Jan-09 04:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.136 (still bad) 2012-Jan-09 04:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.137 (still bad) 2012-Jan-09 04:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2012-Jan-09 04:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.139 (still bad) 2012-Jan-09 04:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2012-Jan-09 04:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 04:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 04:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 04:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.144 (still bad) 2012-Jan-09 04:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 04:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 04:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 04:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 04:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 04:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2012-Jan-09 04:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2012-Jan-09 04:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.137 (still bad) 2012-Jan-09 04:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2012-Jan-09 04:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2012-Jan-09 04:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2012-Jan-09 04:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 04:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2012-Jan-09 04:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Jan-09 04:46:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Jan-09 04:46:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.037 1.116 1.141 2012-Jan-09 04:46:58 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 0.951 1.029 1.091 2012-Jan-09 04:46:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.986 1.129 1.065 2012-Jan-09 04:46:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.028 0.929 0.020 2012-Jan-09 04:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Jan-09 04:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Jan-09 04:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Jan-09 04:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Jan-09 04:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Jan-09 04:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Jan-09 04:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Jan-09 04:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2012-Jan-09 04:47:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Jan-09 04:47:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.039 1.116 1.140 2012-Jan-09 04:47:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.116 0.950 1.029 1.091 2012-Jan-09 04:47:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.983 1.125 1.059 2012-Jan-09 04:47:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.064 0.020 0.926 0.021 2012-Jan-09 04:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Jan-09 04:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Jan-09 04:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.138 (still bad) 2012-Jan-09 04:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.141 (still bad) 2012-Jan-09 04:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.142 (still bad) 2012-Jan-09 04:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Jan-09 04:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 04:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 04:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 04:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Jan-09 04:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.140 (still bad) 2012-Jan-09 04:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Jan-09 04:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Jan-09 04:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Jan-09 04:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.138 (still bad) 2012-Jan-09 04:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.140 (still bad) 2012-Jan-09 04:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.147 (still bad) 2012-Jan-09 04:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.150 (still bad) 2012-Jan-09 04:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:49:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Jan-09 04:49:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.054 1.043 1.118 1.139 2012-Jan-09 04:49:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.120 0.952 1.029 1.092 2012-Jan-09 04:49:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.982 1.123 1.058 2012-Jan-09 04:49:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.065 0.020 0.925 0.021 2012-Jan-09 04:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2012-Jan-09 04:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.137 (still bad) 2012-Jan-09 04:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.139 (still bad) 2012-Jan-09 04:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2012-Jan-09 04:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.138 (still bad) 2012-Jan-09 04:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 04:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2012-Jan-09 04:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 04:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2012-Jan-09 04:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:50:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 04:50:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.043 1.117 1.140 2012-Jan-09 04:50:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.118 0.953 1.028 1.092 2012-Jan-09 04:50:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.984 1.126 1.061 2012-Jan-09 04:50:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.028 0.931 0.029 2012-Jan-09 04:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 04:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2012-Jan-09 04:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 04:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 04:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2012-Jan-09 04:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2012-Jan-09 04:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.152 (still bad) 2012-Jan-09 04:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2012-Jan-09 04:51:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 04:51:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.043 1.129 1.149 2012-Jan-09 04:51:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.122 0.952 1.029 1.096 2012-Jan-09 04:51:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.986 1.133 1.063 2012-Jan-09 04:51:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.028 0.928 0.028 2012-Jan-09 04:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.152 (still bad) 2012-Jan-09 04:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2012-Jan-09 04:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.148 (still bad) 2012-Jan-09 04:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.150 (still bad) 2012-Jan-09 04:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2012-Jan-09 04:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.141 (still bad) 2012-Jan-09 04:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.143 (still bad) 2012-Jan-09 04:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.139 (still bad) 2012-Jan-09 04:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.142 (still bad) 2012-Jan-09 04:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.145 (still bad) 2012-Jan-09 04:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2012-Jan-09 04:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.141 (still bad) 2012-Jan-09 04:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.144 (still bad) 2012-Jan-09 04:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.140 (still bad) 2012-Jan-09 04:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.142 (still bad) 2012-Jan-09 04:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.147 (still bad) 2012-Jan-09 04:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2012-Jan-09 04:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2012-Jan-09 04:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.143 (still bad) 2012-Jan-09 04:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.140 (still bad) 2012-Jan-09 04:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.148 (still bad) 2012-Jan-09 04:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2012-Jan-09 04:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:52:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 04:52:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.043 1.118 1.141 2012-Jan-09 04:52:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.123 0.952 1.031 1.096 2012-Jan-09 04:52:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.989 1.123 1.061 2012-Jan-09 04:52:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.028 0.929 0.028 2012-Jan-09 04:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.140 (still bad) 2012-Jan-09 04:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2012-Jan-09 04:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:53:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Jan-09 04:53:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.040 1.119 1.142 2012-Jan-09 04:53:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.124 0.956 1.033 1.096 2012-Jan-09 04:53:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.987 1.130 1.061 2012-Jan-09 04:53:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.069 0.028 0.929 0.020 2012-Jan-09 04:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.143 (still bad) 2012-Jan-09 04:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Jan-09 04:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Jan-09 04:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Jan-09 04:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Jan-09 04:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Jan-09 04:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.146 (still bad) 2012-Jan-09 04:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2012-Jan-09 04:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Jan-09 04:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Jan-09 04:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2012-Jan-09 04:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.148 (still bad) 2012-Jan-09 04:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Jan-09 04:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.148 (still bad) 2012-Jan-09 04:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:54:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Jan-09 04:54:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.053 1.041 1.121 1.143 2012-Jan-09 04:54:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.123 0.957 1.033 1.095 2012-Jan-09 04:54:09 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.987 1.128 1.061 2012-Jan-09 04:54:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.020 0.931 0.021 2012-Jan-09 04:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Jan-09 04:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2012-Jan-09 04:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2012-Jan-09 04:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2012-Jan-09 04:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.150 (still bad) 2012-Jan-09 04:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Jan-09 04:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.149 (still bad) 2012-Jan-09 04:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.149 (still bad) 2012-Jan-09 04:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Jan-09 04:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2012-Jan-09 04:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2012-Jan-09 04:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2012-Jan-09 04:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.144 (still bad) 2012-Jan-09 04:55:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Jan-09 04:55:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.043 1.122 1.145 2012-Jan-09 04:55:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.121 0.955 1.029 1.097 2012-Jan-09 04:55:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.989 1.130 1.063 2012-Jan-09 04:55:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.073 0.023 0.933 0.024 2012-Jan-09 04:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Jan-09 04:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Jan-09 04:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Jan-09 04:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.142 (still bad) 2012-Jan-09 04:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.144 (still bad) 2012-Jan-09 04:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.150 (still bad) 2012-Jan-09 04:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.141 (still bad) 2012-Jan-09 04:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.152 (still bad) 2012-Jan-09 04:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2012-Jan-09 04:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.154 (still bad) 2012-Jan-09 04:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.146 (still bad) 2012-Jan-09 04:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.145 (still bad) 2012-Jan-09 04:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.148 (still bad) 2012-Jan-09 04:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.147 (still bad) 2012-Jan-09 04:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.153 (still bad) 2012-Jan-09 04:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.145 (still bad) 2012-Jan-09 04:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.152 (still bad) 2012-Jan-09 04:56:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 04:56:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 1.046 1.118 1.142 2012-Jan-09 04:56:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.119 0.955 1.030 1.093 2012-Jan-09 04:56:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.817 0.983 1.123 1.062 2012-Jan-09 04:56:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.028 0.929 0.028 2012-Jan-09 04:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 04:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.152 (still bad) 2012-Jan-09 04:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 04:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.145 (still bad) 2012-Jan-09 04:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 04:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.150 (still bad) 2012-Jan-09 04:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.143 (still bad) 2012-Jan-09 04:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.142 (still bad) 2012-Jan-09 04:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 04:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 04:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.149 (still bad) 2012-Jan-09 04:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 04:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2012-Jan-09 04:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.146 (still bad) 2012-Jan-09 04:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2012-Jan-09 04:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2012-Jan-09 04:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.152 (still bad) 2012-Jan-09 04:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.157 (still bad) 2012-Jan-09 04:57:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Jan-09 04:57:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.039 1.132 1.156 2012-Jan-09 04:57:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.134 0.969 1.032 1.096 2012-Jan-09 04:57:13 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.985 1.129 1.063 2012-Jan-09 04:57:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.028 0.932 0.021 2012-Jan-09 04:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.157 (still bad) 2012-Jan-09 04:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.159 (still bad) 2012-Jan-09 04:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.158 (still bad) 2012-Jan-09 04:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.156 (still bad) 2012-Jan-09 04:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.155 (still bad) 2012-Jan-09 04:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.148 (still bad) 2012-Jan-09 04:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.142 (still bad) 2012-Jan-09 04:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Jan-09 04:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.143 (still bad) 2012-Jan-09 04:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Jan-09 04:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.142 (still bad) 2012-Jan-09 04:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.144 (still bad) 2012-Jan-09 04:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.149 (still bad) 2012-Jan-09 04:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.142 (still bad) 2012-Jan-09 04:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.144 (still bad) 2012-Jan-09 04:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.143 (still bad) 2012-Jan-09 04:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.147 (still bad) 2012-Jan-09 04:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Jan-09 04:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.143 (still bad) 2012-Jan-09 04:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 04:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.150 (still bad) 2012-Jan-09 04:58:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.023 < 0.75)! 2012-Jan-09 04:58:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 1.045 1.121 1.144 2012-Jan-09 04:58:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.114 0.953 1.028 1.094 2012-Jan-09 04:58:14 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.984 1.126 1.065 2012-Jan-09 04:58:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.071 0.023 0.932 0.024 2012-Jan-09 04:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.143 (still bad) 2012-Jan-09 04:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.147 (still bad) 2012-Jan-09 04:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.146 (still bad) 2012-Jan-09 04:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.147 (still bad) 2012-Jan-09 04:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.153 (still bad) 2012-Jan-09 04:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.144 (still bad) 2012-Jan-09 04:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Jan-09 04:58:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 04:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Jan-09 04:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Jan-09 04:58:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 04:58:34 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 04:58:34 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 04:58:34 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2012-Jan-09 04:58:34 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 04:58:34 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2012-Jan-09 04:58:34 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 04:58:34 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Jan-09 04:58:34 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 04:58:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 04:58:34 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 04:58:34 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2012-Jan-09 04:58:34 COMMAND run_command_line: EXECUTING command 55: 'ENDIF' 2012-Jan-09 04:58:34 COMMAND run_command_line: EXECUTING command 58: 'IF LSTSLEW(AGES1367_p1_049) < 115038 THEN' 2012-Jan-09 04:58:35 LOG3 is_if_valid: Current source data: up 133.0 3.3 UP - - 73 3.8 2012-Jan-09 04:58:35 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_049) < 115038 2012-Jan-09 04:58:35 INFO5 is_if_valid: Condition parsed as: 11.809800333333333 < 11.843888888888889 2012-Jan-09 04:58:35 COMMAND run_command_line: EXECUTING command 59: 'FIXEDDRIFT az=121.01 alfaangle=75.5 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_049 ra=113400.00 dec=203800.00' 2012-Jan-09 04:58:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 04:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.146 (still bad) 2012-Jan-09 04:58:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 04:58:35 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 121.01 75.5 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_049 113400.00 203800.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:58:35 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 04:58:35 LOG5 begin_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Jan-09 04:58:35 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p1_047' 2012-Jan-09 04:58:35 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 04:58:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_049} 2012-Jan-09 04:58:36 INFO3 fixed_driftmap: Sending telescope to Az = 121.01 and ZA = 4.37 2012-Jan-09 04:58:36 LOG3 track_source: Calling 'track_source AGES1367_p1_049 121.01 4.3696364984 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 04:58:36 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 04:58:36 LOG5 begin_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Jan-09 04:58:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_049} INFO {Slewing to source 'AGES1367_p1_049' ...} 2012-Jan-09 04:58:36 INFO1 track_source: Starting to track AGES1367_p1_049 2012-Jan-09 04:58:36 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_049" 2012-Jan-09 04:58:36 LOG3 vw_send: To DATATAKING: set ra 121.01 2012-Jan-09 04:58:36 LOG3 vw_send: To DATATAKING: set dec 4.3696364984 2012-Jan-09 04:58:36 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 04:58:36 LOG3 vw_send: To DATATAKING: pnt tr 121.01 4.3696364984 -CF 2012-Jan-09 04:58:36 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:58:36 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 04:58:36 LOG5 finish_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Jan-09 04:58:36 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 04:58:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:58:36 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 04:58:36 LOG5 end_task: Level: (3) ID = <10236> Status = 0 0 0 0 ok 2012-Jan-09 04:58:36 START begin_task: Starting task 'rotate ALFA to +75.5 degrees' 2012-Jan-09 04:58:36 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Jan-09 04:58:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +75.5 degrees ...} 2012-Jan-09 04:58:36 INFO2 rotate_alfa: ALFA commanded to +75.5 degrees 2012-Jan-09 04:58:36 LOG3 sock_errsend: To ALFAMOTOR: POSITION 75.5 REPLY 2012-Jan-09 04:58:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 04:58:36 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 04:58:36 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_049" 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: set ra 121.01 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: set dec 4.3696364984 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: vw% 121.01 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: vw% 4.3696364984 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: pnt tr 121.01 4.3696364984 -CF 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 04:58:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 04:59:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 04:59:31 INFO3 alfa_motor: ALFA rotator in-position +75.50 degrees 2012-Jan-09 04:59:31 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 04:59:31 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2012-Jan-09 04:59:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 04:59:31 STOP finish_task: Finishing task 'rotate ALFA to +75.5 degrees' 2012-Jan-09 04:59:31 LOG5 finish_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Jan-09 04:59:31 INFO2 finish_task: DONE finished configuration: rotating ALFA to +75.5 degrees 2012-Jan-09 04:59:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 04:59:31 STOP end_task: Finishing task 'rotate ALFA to +75.5 degrees' with status 'OK' 2012-Jan-09 04:59:31 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2012-Jan-09 04:59:31 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 04:59:31 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Jan-09 04:59:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 04:59:31 LOG3 waittrk: Start waittrk 5 2012-Jan-09 04:59:31 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 04:59:31 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Jan-09 04:59:36 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 04:59:36 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2012-Jan-09 04:59:36 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 04:59:36 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Jan-09 05:02:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 05:02:58 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2012-Jan-09 05:02:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:02:58 INFO2 waittrk: Now tracking AGES1367_p1_049 2012-Jan-09 05:02:58 LOG4 waittrk: Current telescope position: Az = 120.77 ZA = 4.37 2012-Jan-09 05:02:58 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 05:02:58 LOG5 finish_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Jan-09 05:02:58 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 05:02:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:02:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 05:02:58 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2012-Jan-09 05:02:58 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 05:02:58 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Jan-09 05:02:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 05:02:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 05:02:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:02:58 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 05:02:58 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Jan-09 05:02:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 05:02:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:02:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:02:59 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:02:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 05:02:59 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2012-Jan-09 05:03:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 05:03:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:03:00 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 05:03:00 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:03:00 LOG5 begin_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Jan-09 05:03:00 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:00 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:03:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:03:00 LOG5 end_task: Level: (4) ID = <10244> Status = 0 0 0 0 ok 2012-Jan-09 05:03:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:03:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 05:03:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:03:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:03:00 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:03:00 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2012-Jan-09 05:03:00 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:03:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:03:00 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2012-Jan-09 05:03:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:03:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:03:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 05:03:00 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2012-Jan-09 05:03:00 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Jan-09 05:03:00 INFO2 astwait: Waiting for 24 seconds from 09:03:00 to 09:03:24 UTC ... 2012-Jan-09 05:03:00 LOG4 send_obs_status: To obs_status: <1> TASKTIME 24 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 05:03:00 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Jan-09 05:03:00 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Jan-09 05:03:24 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 INFO3 astwait: Finished waiting 2012-Jan-09 05:03:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:03:24 LOG5 dopset_later: Calling 'dopset_later 60.875337704636451' 2012-Jan-09 05:03:24 INFO3 dopset_later: Setting Doppler correction for 05:04:24 (60.9 seconds from now) 2012-Jan-09 05:03:24 LOG5 antvel: Calling 'antvel 121.010000 4.369636 F Heliocentric 60.875337704636451' 2012-Jan-09 05:03:24 LOG2 antvel: Transforming current Az = 121.01 ZA = 4.37 to apparent RA = 11:34:39.1 Dec = +20:33:44.0 2012-Jan-09 05:03:24 LOG2 antvel: Parameters to Doppler: Heliocentric 32664 2012 9 0.0 2012-Jan-09 05:03:24 INFO5 antvel: Computed antenna velocity: -24.45680 km/s 2012-Jan-09 05:03:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.456804379400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 05:03:24 INFO4 dopset_gen: New sky frequencies: 1381.356118 1381.356118 1381.356118 1381.356118 1381.356118 1381.356118 1381.356118 1381.356118 1381.356118 2012-Jan-09 05:03:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.356118 sky0=1381.356118 sky1=1381.356118 sky2=1381.356118 sky3=1381.356118 sky4=1381.356118 sky5=1381.356118 sky6=1381.356118 sky7=1381.356118 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 05:03:24 LOG2 dopset_gen: Result from 'sky2syn': 1631.356118 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631356118.0} 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 05:03:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 05:03:24 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 05:03:24 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.6 Dec = +20:37:43.4 2012-Jan-09 05:03:24 LOG3 track_source: Calling 'track_source AGES1367_p1_049 113303.6 203743.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:03:24 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:03:24 LOG5 begin_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_049} INFO {Slewing to source 'AGES1367_p1_049' ...} 2012-Jan-09 05:03:24 INFO1 track_source: Starting to track AGES1367_p1_049 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_049" 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: set ra 113303.6 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: set dec 203743.4 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: pnt tr 113303.6 203743.4 -CJ 2012-Jan-09 05:03:24 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:03:24 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:03:24 LOG5 finish_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:03:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:03:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:03:24 LOG5 end_task: Level: (3) ID = <10247> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 05:03:24 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 05:03:24 LOG3 waittrk: Start waittrk 5 2012-Jan-09 05:03:24 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 05:03:24 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631356118.0} 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_049" 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: set ra 113303.6 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: set dec 203743.4 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: vw% 113303.6 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: vw% 203743.4 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.6 203743.4 -CJ 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:03:24 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 05:03:29 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2012-Jan-09 05:03:29 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 05:03:29 LOG5 begin_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2012-Jan-09 05:03:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 05:03:33 LOG5 end_task: Level: (4) ID = <10250> Status = 0 0 0 0 ok 2012-Jan-09 05:03:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:03:33 INFO2 waittrk: Now tracking AGES1367_p1_049 2012-Jan-09 05:03:33 LOG4 waittrk: Current telescope position: Az = 120.56 ZA = 4.39 2012-Jan-09 05:03:33 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 05:03:33 LOG5 finish_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2012-Jan-09 05:03:33 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 05:03:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:03:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 05:03:33 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2012-Jan-09 05:03:33 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 05:03:33 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2012-Jan-09 05:03:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 05:03:33 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 05:03:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 05:03:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 05:03:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:03:33 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 05:03:33 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Jan-09 05:03:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 05:03:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:03:36 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:36 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:03:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 05:03:36 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2012-Jan-09 05:03:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 05:03:36 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 05:03:36 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2012-Jan-09 05:03:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 05:03:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:03:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:03:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:03:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:03:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 05:03:36 LOG5 begin_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2012-Jan-09 05:03:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 05:03:37 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 7 6 dB 2012-Jan-09 05:03:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 2 3 dB 2012-Jan-09 05:03:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 2 dB 2012-Jan-09 05:03:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Jan-09 05:03:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 05:03:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 05:03:37 LOG5 end_task: Level: (5) ID = <10254> Status = 0 0 0 0 ok 2012-Jan-09 05:03:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.030 1.044 ALFA beam 1: 1.110 0.910 2012-Jan-09 05:03:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.946 0.973 ALFA beam 3: 1.028 1.072 2012-Jan-09 05:03:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.818 0.982 ALFA beam 5: 1.110 1.070 2012-Jan-09 05:03:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.030 0.014 ALFA beam 7: 0.895 0.014 2012-Jan-09 05:03:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 05:03:37 LOG5 finish_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2012-Jan-09 05:03:37 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 05:03:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:03:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 05:03:37 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2012-Jan-09 05:03:37 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 05:03:37 LOG5 begin_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2012-Jan-09 05:03:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 05:03:37 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 05:03:37 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 05:03:37 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 05:03:37 LOG5 begin_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2012-Jan-09 05:03:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 05:03:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.030 1.044 1.110 0.910 2012-Jan-09 05:03:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.973 1.028 1.072 2012-Jan-09 05:03:38 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.982 1.110 1.070 2012-Jan-09 05:03:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.030 0.014 0.895 0.014 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b0s0g0 rms:A 30.5 26.8 B 30.1 30.2 mn:A 0.1 -0.1 B -0.4 -0.3 gn: 11 11 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b0s1g0 rms:A 47.3 46.2 B 37.5 39.7 mn:A -0.1 -0.6 B -0.5 0.1 gn: 12 11 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.0 28.1 B 33.0 28.8 mn:A 0.4 0.6 B 0.1 0.1 gn: 7 11 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b1s1g0 rms:A 42.6 39.5 B 39.5 39.6 mn:A -0.3 -0.2 B 0.6 0.2 gn: 8 10 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.2 28.3 B 28.2 29.5 mn:A 0.1 -0.3 B 0.4 0.1 gn: 10 11 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b2s1g0 rms:A 44.2 44.8 B 41.2 38.4 mn:A 0.3 -0.4 B 0.0 0.1 gn: 11 12 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.8 28.6 B 30.7 27.4 mn:A 0.4 -0.3 B 0.0 -0.3 gn: 12 12 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b3s1g0 rms:A 32.6 31.8 B 33.3 34.7 mn:A -0.2 0.3 B 0.2 0.3 gn: 12 12 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.1 29.2 B 29.8 29.9 mn:A -0.3 -0.3 B -0.5 -0.1 gn: 13 12 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b4s1g0 rms:A 44.0 40.1 B 36.0 34.6 mn:A 0.0 -0.0 B -0.4 0.3 gn: 16 13 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b5s0g0 rms:A 31.7 30.6 B 30.1 30.1 mn:A 0.8 0.4 B 0.1 0.5 gn: 13 11 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b5s1g0 rms:A 44.9 45.0 B 41.1 40.7 mn:A -0.5 -0.0 B 0.1 0.2 gn: 12 11 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b6s0g0 rms:A 31.4 28.8 B 15.3 15.8 mn:A -0.4 0.2 B 0.4 -0.3 gn: 13 31 2012-Jan-09 05:03:44 INFO3 from_mock: From MOCK: b6s1g0 rms:A 42.9 39.2 B 13.4 12.9 mn:A 0.7 0.6 B 0.1 0.3 gn: 13 31 2012-Jan-09 05:03:44 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 05:03:44 LOG5 end_task: Level: (5) ID = <10256> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 05:03:44 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 05:03:44 LOG5 finish_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 05:03:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:03:44 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 05:03:44 LOG5 end_task: Level: (4) ID = <10255> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 05:03:44 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 05:03:44 LOG5 finish_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 05:03:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:03:44 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 05:03:44 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 05:03:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 05:03:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 05:03:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 05:03:44 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 05:03:44 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 05:03:44 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 05:03:44 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 05:03:44 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 05:03:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 05:03:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:03:44 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 05:03:44 LOG5 begin_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 05:03:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 05:03:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:03:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:44 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:03:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 05:03:44 LOG5 end_task: Level: (5) ID = <10259> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 05:03:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:03:44 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 05:03:44 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:03:44 LOG5 begin_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Jan-09 05:03:44 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:03:44 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:03:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:03:44 LOG5 end_task: Level: (5) ID = <10260> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:03:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 05:03:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:03:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:03:45 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:03:45 LOG5 begin_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:03:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:03:45 LOG5 end_task: Level: (5) ID = <10261> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:03:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:03:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 05:03:45 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 05:03:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 05:03:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 05:03:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 05:03:45 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 05:03:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 05:03:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 05:03:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 05:03:45 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 05:03:45 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 05:03:45 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 05:03:45 LOG5 log_alfabeam: Parameters: 11.551000000000002 20.628722222222223 11.833092 2012.0252181407964 75.499931 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 0 11.550999999999998 20.628722222222230 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 1 11.553450089929360 20.536068234159181 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 2 11.558200742396494 20.597803663925820 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 3 11.555869158069109 20.690773680643673 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 4 11.548682808391874 20.722818684888338 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 5 11.543766719114490 20.658586343222623 2012-Jan-09 05:03:45 LOG4 log_alfabeam: ALFABEAM 6 11.546204209111394 20.564800863353220 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_049 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: patternid=200900112 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: scanid=200900113 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456356118.0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306356118.0 2012-Jan-09 05:03:45 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 05:03:45 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 05:03:45 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_049:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900112:scanid=200900113:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456356118.0:topobfreqhz=1306356118.0:filetype=1 2012-Jan-09 05:03:45 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 05:03:45 LOG5 begin_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 05:03:45 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 05:03:45 LOG5 end_task: Level: (5) ID = <10264> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 05:03:45 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 05:03:45 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 05:03:45 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 05:03:45 LOG5 begin_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0005.fits 2012-Jan-09 05:03:45 LOG4 from_mock: From MOCK: starok 2012-Jan-09 05:03:45 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 05:03:45 LOG5 end_task: Level: (5) ID = <10265> Status = 0 0 0 0 ok 2012-Jan-09 05:03:45 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 05:03:45 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900113 2012-Jan-09 05:03:46 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 05:03:46 LOG5 begin_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2012-Jan-09 05:03:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120109.a2048.0005.fits} 2012-Jan-09 05:03:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 05:03:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 05:03:46 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 05:03:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 05:03:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32627.00 2012-Jan-09 05:03:48 INFO2 got_mock_message: Mock spectrometer start file number is 01500 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 05:03:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 05:03:48 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:48 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:03:51 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:03:51.01 2012-Jan-09 05:03:51 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326099831.01 Mon Jan 9 05:03:51 2012 2012-Jan-09 05:03:51 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.356118 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 05:03:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.528 (still bad) 2012-Jan-09 05:03:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 05:03:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 05:03:57 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 05:03:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 05:03:57 LOG5 end_task: Level: (5) ID = <10266> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 05:03:57 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 05:03:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 05:03:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 05:03:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 05:03:57 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 05:03:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 05:03:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 05:03:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 05:03:57 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 05:03:57 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 05:03:57 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 05:03:57 LOG5 log_alfabeam: Parameters: 11.551000000000002 20.628722222222223 11.836435 2012.0252185210534 75.499931 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 0 11.551000000000016 20.628722222222219 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 1 11.553485178208103 20.536249111848825 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 2 11.558212716944251 20.598356349933180 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 3 11.555844821380628 20.691151612404138 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 4 11.548645873754745 20.722634438026112 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 5 11.543755443245214 20.658040314726559 2012-Jan-09 05:03:57 LOG4 log_alfabeam: ALFABEAM 6 11.546228612031584 20.564445441494414 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_049 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: patternid=200900112 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: scanid=200900114 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456356118.0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306356118.0 2012-Jan-09 05:03:57 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 05:03:57 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 05:03:57 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_049:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900112:scanid=200900114:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456356118.0:topobfreqhz=1306356118.0:filetype=1 2012-Jan-09 05:03:57 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 05:03:57 LOG5 begin_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 05:03:57 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 05:03:57 LOG5 end_task: Level: (5) ID = <10269> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 05:03:57 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 05:03:57 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 05:03:57 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 05:03:57 LOG5 begin_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG4 from_mock: From MOCK: starok 2012-Jan-09 05:03:57 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 05:03:57 LOG5 end_task: Level: (5) ID = <10270> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 05:03:57 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900114 2012-Jan-09 05:03:57 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 05:03:57 LOG5 begin_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2012-Jan-09 05:03:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 05:03:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 05:03:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32638.00 2012-Jan-09 05:03:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 05:03:58 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 05:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.556 (still bad) 2012-Jan-09 05:04:00 INFO2 got_mock_message: Mock spectrometer start file number is 01600 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 05:04:00 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 05:04:00 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:00 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:04:03 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:04:03.01 2012-Jan-09 05:04:03 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326099843.01 Mon Jan 9 05:04:03 2012 2012-Jan-09 05:04:03 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.356118 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 05:04:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:04:03 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 05:04:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 05:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Jan-09 05:04:09 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 05:04:09 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 05:04:09 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 05:04:09 LOG5 end_task: Level: (5) ID = <10271> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 05:04:09 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 05:04:09 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 05:04:09 LOG5 finish_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 05:04:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:04:09 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 05:04:09 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 05:04:09 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 121.01 and ZA = 4.37 2012-Jan-09 05:04:09 LOG3 track_source: Calling 'track_source AGES1367_p1_049 121.01 4.3696364984 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:04:09 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:04:09 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_049} INFO {Slewing to source 'AGES1367_p1_049' ...} 2012-Jan-09 05:04:09 INFO1 track_source: Starting to track AGES1367_p1_049 2012-Jan-09 05:04:09 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_049" 2012-Jan-09 05:04:09 LOG3 vw_send: To DATATAKING: set ra 121.01 2012-Jan-09 05:04:09 LOG3 vw_send: To DATATAKING: set dec 4.3696364984 2012-Jan-09 05:04:09 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:04:09 LOG3 vw_send: To DATATAKING: pnt tr 121.01 4.3696364984 -CF 2012-Jan-09 05:04:09 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:04:09 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:04:09 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:04:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:04:09 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:04:09 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 LOG1 fixed_driftmap: Parameters: HA = +00:15:59.8 Start = 11:50:39.1 LST = 11:50:23.2 diff = 15.9 secs 2012-Jan-09 05:04:09 INFO2 fixed_driftmap: Waiting 13.9 seconds for RA 11:34:39 2012-Jan-09 05:04:09 INFO2 lstwait: Waiting for 13.9 secs from LST 11:50:23 to LST 11:50:37 ... 2012-Jan-09 05:04:09 LOG4 send_obs_status: To obs_status: <1> TASKTIME 13.881600705594382 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 05:04:09 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 05:04:09 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_049" 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: set ra 121.01 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: set dec 4.3696364984 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: vw% 121.01 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: vw% 4.3696364984 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: pnt tr 121.01 4.3696364984 -CF 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:04:09 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Jan-09 05:04:23 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 05:04:23 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2012-Jan-09 05:04:23 LOG4 lstwait: Finished waiting 1.12 seconds late 2012-Jan-09 05:04:23 INFO3 lstwait: Finished waiting 2012-Jan-09 05:04:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:04:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 05:04:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 05:04:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 05:04:23 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 05:04:23 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 05:04:23 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2012-Jan-09 05:04:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 05:04:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_049 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: patternid=200900115 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: scanid=200900115 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456356118.0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306356118.0 2012-Jan-09 05:04:23 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 05:04:23 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 05:04:23 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_049:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900115:scanid=200900115:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456356118.0:topobfreqhz=1306356118.0:filetype=1 2012-Jan-09 05:04:23 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 05:04:23 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Jan-09 05:04:23 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 05:04:23 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 05:04:23 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2012-Jan-09 05:04:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 05:04:23 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 05:04:23 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 05:04:23 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 05:04:23 LOG5 begin_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Jan-09 05:04:23 LOG4 from_mock: From MOCK: starok 2012-Jan-09 05:04:23 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 05:04:23 LOG5 end_task: Level: (4) ID = <10276> Status = 0 0 0 0 ok 2012-Jan-09 05:04:23 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 05:04:23 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900115 2012-Jan-09 05:04:24 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 05:04:24 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2012-Jan-09 05:04:24 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 05:04:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 05:04:24 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 05:04:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 05:04:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32665.00 2012-Jan-09 05:04:26 INFO2 got_mock_message: Mock spectrometer start file number is 01700 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 05:04:26 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1199.9 s 2012-Jan-09 05:04:26 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.356118 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 05:04:26 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 05:04:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.356118 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Jan-09 05:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.111 (still bad) 2012-Jan-09 05:04:29 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:04:29.01 2012-Jan-09 05:04:29 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326099869.01 Mon Jan 9 05:04:29 2012 2012-Jan-09 05:04:29 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 05:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Jan-09 05:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Jan-09 05:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.113 (still bad) 2012-Jan-09 05:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:04:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:04:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.047 1.112 0.911 2012-Jan-09 05:04:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.975 1.028 1.071 2012-Jan-09 05:04:40 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.985 1.109 1.070 2012-Jan-09 05:04:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.028 0.027 0.893 0.027 2012-Jan-09 05:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 05:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:05:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:05:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.048 1.115 0.913 2012-Jan-09 05:05:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.976 1.029 1.070 2012-Jan-09 05:05:41 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.988 1.110 1.071 2012-Jan-09 05:05:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.028 0.895 0.028 2012-Jan-09 05:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2012-Jan-09 05:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:06:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:06:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.049 1.120 0.917 2012-Jan-09 05:06:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.978 1.029 1.072 2012-Jan-09 05:06:44 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.982 1.110 1.073 2012-Jan-09 05:06:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.027 0.913 0.027 2012-Jan-09 05:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:07:11 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:07:11.297 (seconds: 18431.297)!} 2012-Jan-09 05:07:11 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:07:11.297 (seconds: 18431.297)! 2012-Jan-09 05:07:12 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 18430.0 to 18431.0! 2012-Jan-09 05:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:07:13 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (18430.0 - 18432.0)! 2012-Jan-09 05:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:07:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:07:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.053 1.114 0.911 2012-Jan-09 05:07:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.976 1.029 1.071 2012-Jan-09 05:07:46 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.983 1.111 1.073 2012-Jan-09 05:07:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.027 0.899 0.027 2012-Jan-09 05:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Jan-09 05:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.113 (still bad) 2012-Jan-09 05:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Jan-09 05:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.114 (still bad) 2012-Jan-09 05:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Jan-09 05:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 05:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.119 (still bad) 2012-Jan-09 05:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 05:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.123 (still bad) 2012-Jan-09 05:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 05:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 05:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Jan-09 05:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:08:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:08:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.051 1.118 0.915 2012-Jan-09 05:08:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.979 1.032 1.077 2012-Jan-09 05:08:47 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.983 1.111 1.072 2012-Jan-09 05:08:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.027 0.902 0.027 2012-Jan-09 05:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2012-Jan-09 05:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.128 (still bad) 2012-Jan-09 05:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.139 (still bad) 2012-Jan-09 05:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2012-Jan-09 05:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.163 (still bad) 2012-Jan-09 05:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.176 (still bad) 2012-Jan-09 05:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.175 (still bad) 2012-Jan-09 05:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.175 (still bad) 2012-Jan-09 05:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.172 (still bad) 2012-Jan-09 05:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.162 (still bad) 2012-Jan-09 05:09:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:09:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.047 1.115 0.914 2012-Jan-09 05:09:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.979 1.030 1.074 2012-Jan-09 05:09:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.985 1.153 1.114 2012-Jan-09 05:09:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.027 0.900 0.028 2012-Jan-09 05:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.146 (still bad) 2012-Jan-09 05:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 05:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.131 (still bad) 2012-Jan-09 05:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:10:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:10:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.050 1.115 0.915 2012-Jan-09 05:10:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.977 1.032 1.075 2012-Jan-09 05:10:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.990 1.121 1.079 2012-Jan-09 05:10:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.027 0.898 0.028 2012-Jan-09 05:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:11:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:11:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 1.050 1.112 0.913 2012-Jan-09 05:11:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.978 1.029 1.072 2012-Jan-09 05:11:51 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.984 1.112 1.074 2012-Jan-09 05:11:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.032 0.027 0.898 0.027 2012-Jan-09 05:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2012-Jan-09 05:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2012-Jan-09 05:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2012-Jan-09 05:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2012-Jan-09 05:12:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:12:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 1.051 1.115 0.913 2012-Jan-09 05:12:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.973 1.029 1.072 2012-Jan-09 05:12:52 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.983 1.114 1.075 2012-Jan-09 05:12:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.028 0.900 0.028 2012-Jan-09 05:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2012-Jan-09 05:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Jan-09 05:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Jan-09 05:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Jan-09 05:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.116 (still bad) 2012-Jan-09 05:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.112 (still bad) 2012-Jan-09 05:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.114 (still bad) 2012-Jan-09 05:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 05:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 05:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Jan-09 05:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.115 (still bad) 2012-Jan-09 05:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.113 (still bad) 2012-Jan-09 05:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.114 (still bad) 2012-Jan-09 05:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:13:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:13:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.051 1.111 0.910 2012-Jan-09 05:13:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.973 1.028 1.071 2012-Jan-09 05:13:55 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.983 1.112 1.073 2012-Jan-09 05:13:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.027 0.897 0.027 2012-Jan-09 05:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2012-Jan-09 05:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:14:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:14:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.053 1.117 0.915 2012-Jan-09 05:14:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.977 1.038 1.079 2012-Jan-09 05:14:57 LOG4 check_wapp_levels: WAPP-3 power levels: 0.818 0.983 1.111 1.073 2012-Jan-09 05:14:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.036 0.027 0.900 0.027 2012-Jan-09 05:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:15:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:15:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.053 1.118 0.915 2012-Jan-09 05:15:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.976 1.032 1.073 2012-Jan-09 05:15:58 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.984 1.117 1.078 2012-Jan-09 05:15:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.037 0.027 0.900 0.027 2012-Jan-09 05:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.127 (still bad) 2012-Jan-09 05:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.126 (still bad) 2012-Jan-09 05:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.116 (still bad) 2012-Jan-09 05:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2012-Jan-09 05:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2012-Jan-09 05:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.129 (still bad) 2012-Jan-09 05:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2012-Jan-09 05:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:16:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:16:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 1.060 1.117 0.914 2012-Jan-09 05:16:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.977 1.035 1.074 2012-Jan-09 05:16:59 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 0.986 1.118 1.077 2012-Jan-09 05:16:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.035 0.028 0.900 0.028 2012-Jan-09 05:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2012-Jan-09 05:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 05:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 05:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Jan-09 05:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2012-Jan-09 05:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Jan-09 05:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.115 (still bad) 2012-Jan-09 05:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 05:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.116 (still bad) 2012-Jan-09 05:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 05:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.126 (still bad) 2012-Jan-09 05:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2012-Jan-09 05:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.125 (still bad) 2012-Jan-09 05:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Jan-09 05:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Jan-09 05:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 05:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Jan-09 05:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Jan-09 05:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Jan-09 05:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Jan-09 05:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Jan-09 05:18:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2012-Jan-09 05:18:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.055 1.119 0.915 2012-Jan-09 05:18:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.977 1.038 1.076 2012-Jan-09 05:18:01 LOG4 check_wapp_levels: WAPP-3 power levels: 0.822 0.985 1.118 1.077 2012-Jan-09 05:18:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.038 0.022 0.904 0.021 2012-Jan-09 05:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.121 (still bad) 2012-Jan-09 05:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Jan-09 05:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.117 (still bad) 2012-Jan-09 05:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Jan-09 05:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Jan-09 05:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Jan-09 05:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Jan-09 05:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Jan-09 05:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.115 (still bad) 2012-Jan-09 05:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Jan-09 05:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Jan-09 05:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.115 (still bad) 2012-Jan-09 05:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.117 (still bad) 2012-Jan-09 05:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Jan-09 05:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Jan-09 05:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Jan-09 05:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Jan-09 05:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Jan-09 05:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.119 (still bad) 2012-Jan-09 05:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.116 (still bad) 2012-Jan-09 05:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Jan-09 05:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Jan-09 05:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 05:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 05:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 05:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.118 (still bad) 2012-Jan-09 05:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.116 (still bad) 2012-Jan-09 05:19:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 05:19:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.035 1.058 1.118 0.916 2012-Jan-09 05:19:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.977 1.035 1.076 2012-Jan-09 05:19:02 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.986 1.114 1.076 2012-Jan-09 05:19:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.025 0.902 0.025 2012-Jan-09 05:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Jan-09 05:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Jan-09 05:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.120 (still bad) 2012-Jan-09 05:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.118 (still bad) 2012-Jan-09 05:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Jan-09 05:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.123 (still bad) 2012-Jan-09 05:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.117 (still bad) 2012-Jan-09 05:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.121 (still bad) 2012-Jan-09 05:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Jan-09 05:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.118 (still bad) 2012-Jan-09 05:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.121 (still bad) 2012-Jan-09 05:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Jan-09 05:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.117 (still bad) 2012-Jan-09 05:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Jan-09 05:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.117 (still bad) 2012-Jan-09 05:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.122 (still bad) 2012-Jan-09 05:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Jan-09 05:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Jan-09 05:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Jan-09 05:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Jan-09 05:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.122 (still bad) 2012-Jan-09 05:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Jan-09 05:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.118 (still bad) 2012-Jan-09 05:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Jan-09 05:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Jan-09 05:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Jan-09 05:20:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:20:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 1.057 1.124 0.917 2012-Jan-09 05:20:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.984 1.044 1.085 2012-Jan-09 05:20:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 0.985 1.119 1.077 2012-Jan-09 05:20:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.028 0.910 0.029 2012-Jan-09 05:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.123 (still bad) 2012-Jan-09 05:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Jan-09 05:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.122 (still bad) 2012-Jan-09 05:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Jan-09 05:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.119 (still bad) 2012-Jan-09 05:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.122 (still bad) 2012-Jan-09 05:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.121 (still bad) 2012-Jan-09 05:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.119 (still bad) 2012-Jan-09 05:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.125 (still bad) 2012-Jan-09 05:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.124 (still bad) 2012-Jan-09 05:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.127 (still bad) 2012-Jan-09 05:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.136 (still bad) 2012-Jan-09 05:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Jan-09 05:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.124 (still bad) 2012-Jan-09 05:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.129 (still bad) 2012-Jan-09 05:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.125 (still bad) 2012-Jan-09 05:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.128 (still bad) 2012-Jan-09 05:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.133 (still bad) 2012-Jan-09 05:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.129 (still bad) 2012-Jan-09 05:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.129 (still bad) 2012-Jan-09 05:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2012-Jan-09 05:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.129 (still bad) 2012-Jan-09 05:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.131 (still bad) 2012-Jan-09 05:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.136 (still bad) 2012-Jan-09 05:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.125 (still bad) 2012-Jan-09 05:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.121 (still bad) 2012-Jan-09 05:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.124 (still bad) 2012-Jan-09 05:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Jan-09 05:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.120 (still bad) 2012-Jan-09 05:21:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:21:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 1.061 1.125 0.920 2012-Jan-09 05:21:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.982 1.041 1.082 2012-Jan-09 05:21:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.823 0.990 1.124 1.083 2012-Jan-09 05:21:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.028 0.911 0.028 2012-Jan-09 05:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.122 (still bad) 2012-Jan-09 05:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.126 (still bad) 2012-Jan-09 05:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.127 (still bad) 2012-Jan-09 05:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 05:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.123 (still bad) 2012-Jan-09 05:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.129 (still bad) 2012-Jan-09 05:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:22:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:22:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 1.057 1.117 0.915 2012-Jan-09 05:22:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.977 1.035 1.075 2012-Jan-09 05:22:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.819 0.988 1.117 1.079 2012-Jan-09 05:22:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.042 0.027 0.907 0.027 2012-Jan-09 05:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:22:10 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:22:10.299 (seconds: 19330.299)!} 2012-Jan-09 05:22:10 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:22:10.299 (seconds: 19330.299)! 2012-Jan-09 05:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:22:11 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 19329.0 to 19330.0! 2012-Jan-09 05:22:12 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (19329.0 - 19331.0)! 2012-Jan-09 05:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.121 (still bad) 2012-Jan-09 05:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2012-Jan-09 05:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.124 (still bad) 2012-Jan-09 05:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:23:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:23:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 1.068 1.115 0.917 2012-Jan-09 05:23:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.978 1.039 1.079 2012-Jan-09 05:23:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.820 0.986 1.117 1.079 2012-Jan-09 05:23:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.039 0.027 0.902 0.027 2012-Jan-09 05:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.119 (still bad) 2012-Jan-09 05:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.117 (still bad) 2012-Jan-09 05:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2012-Jan-09 05:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.118 (still bad) 2012-Jan-09 05:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.120 (still bad) 2012-Jan-09 05:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.128 (still bad) 2012-Jan-09 05:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.122 (still bad) 2012-Jan-09 05:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.130 (still bad) 2012-Jan-09 05:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.125 (still bad) 2012-Jan-09 05:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.121 (still bad) 2012-Jan-09 05:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.129 (still bad) 2012-Jan-09 05:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.127 (still bad) 2012-Jan-09 05:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.132 (still bad) 2012-Jan-09 05:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 05:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.139 (still bad) 2012-Jan-09 05:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.137 (still bad) 2012-Jan-09 05:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.141 (still bad) 2012-Jan-09 05:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.138 (still bad) 2012-Jan-09 05:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.136 (still bad) 2012-Jan-09 05:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.135 (still bad) 2012-Jan-09 05:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.128 (still bad) 2012-Jan-09 05:24:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.022 < 0.75)! 2012-Jan-09 05:24:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 1.063 1.118 0.918 2012-Jan-09 05:24:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.982 1.036 1.078 2012-Jan-09 05:24:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.821 0.990 1.127 1.083 2012-Jan-09 05:24:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.041 0.022 0.904 0.022 2012-Jan-09 05:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.125 (still bad) 2012-Jan-09 05:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.122 (still bad) 2012-Jan-09 05:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.123 (still bad) 2012-Jan-09 05:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Jan-09 05:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.125 (still bad) 2012-Jan-09 05:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.122 (still bad) 2012-Jan-09 05:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.126 (still bad) 2012-Jan-09 05:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.121 (still bad) 2012-Jan-09 05:24:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 05:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 05:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 05:24:30 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 05:24:30 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 05:24:30 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 05:24:30 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2012-Jan-09 05:24:30 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 05:24:30 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2012-Jan-09 05:24:30 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 05:24:30 LOG5 finish_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Jan-09 05:24:30 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 05:24:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 05:24:30 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 05:24:30 LOG5 end_task: Level: (2) ID = <10235> Status = 0 0 0 0 ok 2012-Jan-09 05:24:30 COMMAND run_command_line: EXECUTING command 62: 'ENDIF' 2012-Jan-09 05:24:30 COMMAND run_command_line: EXECUTING command 65: 'IF LSTSLEW(AGES1367_p1_051) < 121408 THEN' 2012-Jan-09 05:24:31 LOG3 is_if_valid: Current source data: up 105.7 8.8 UP - - 47 1.8 2012-Jan-09 05:24:31 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_051) < 121408 2012-Jan-09 05:24:31 INFO5 is_if_valid: Condition parsed as: 12.209873 < 12.235555555555555 2012-Jan-09 05:24:31 COMMAND run_command_line: EXECUTING command 66: 'FIXEDDRIFT az=104.66 alfaangle=-84.1 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_051 ra=113400.00 dec=203500.00' 2012-Jan-09 05:24:31 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 05:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.120 (still bad) 2012-Jan-09 05:24:31 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 05:24:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 104.66 -84.1 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_051 113400.00 203500.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:24:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 05:24:31 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2012-Jan-09 05:24:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p1_049' 2012-Jan-09 05:24:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 05:24:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_051} 2012-Jan-09 05:24:32 INFO3 fixed_driftmap: Sending telescope to Az = 104.66 and ZA = 9.56 2012-Jan-09 05:24:32 LOG3 track_source: Calling 'track_source AGES1367_p1_051 104.66 9.5607549911 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:24:32 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:24:32 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Jan-09 05:24:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_051} INFO {Slewing to source 'AGES1367_p1_051' ...} 2012-Jan-09 05:24:32 INFO1 track_source: Starting to track AGES1367_p1_051 2012-Jan-09 05:24:32 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_051" 2012-Jan-09 05:24:32 LOG3 vw_send: To DATATAKING: set ra 104.66 2012-Jan-09 05:24:32 LOG3 vw_send: To DATATAKING: set dec 9.5607549911 2012-Jan-09 05:24:32 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:24:32 LOG3 vw_send: To DATATAKING: pnt tr 104.66 9.5607549911 -CF 2012-Jan-09 05:24:32 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:24:32 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:24:32 LOG5 finish_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Jan-09 05:24:32 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:24:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:24:32 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:24:32 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2012-Jan-09 05:24:32 START begin_task: Starting task 'rotate ALFA to -84.1 degrees' 2012-Jan-09 05:24:32 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2012-Jan-09 05:24:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -84.1 degrees ...} 2012-Jan-09 05:24:32 INFO2 rotate_alfa: ALFA commanded to -84.1 degrees 2012-Jan-09 05:24:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION -84.1 REPLY 2012-Jan-09 05:24:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 05:24:32 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 05:24:32 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_051" 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: set ra 104.66 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: set dec 9.5607549911 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: vw% 104.66 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: vw% 9.5607549911 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: pnt tr 104.66 9.5607549911 -CF 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:24:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:26:01 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 05:26:01 INFO3 alfa_motor: ALFA rotator in-position -84.10 degrees 2012-Jan-09 05:26:01 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 05:26:01 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2012-Jan-09 05:26:01 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:26:01 STOP finish_task: Finishing task 'rotate ALFA to -84.1 degrees' 2012-Jan-09 05:26:01 LOG5 finish_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2012-Jan-09 05:26:01 INFO2 finish_task: DONE finished configuration: rotating ALFA to -84.1 degrees 2012-Jan-09 05:26:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:26:01 STOP end_task: Finishing task 'rotate ALFA to -84.1 degrees' with status 'OK' 2012-Jan-09 05:26:01 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2012-Jan-09 05:26:01 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 05:26:01 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2012-Jan-09 05:26:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 05:26:01 LOG3 waittrk: Start waittrk 5 2012-Jan-09 05:26:01 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 05:26:01 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Jan-09 05:26:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 05:26:06 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2012-Jan-09 05:26:06 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 05:26:06 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2012-Jan-09 05:26:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 05:26:46 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2012-Jan-09 05:26:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:26:46 INFO2 waittrk: Now tracking AGES1367_p1_051 2012-Jan-09 05:26:46 LOG4 waittrk: Current telescope position: Az = 104.46 ZA = 9.56 2012-Jan-09 05:26:46 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 05:26:46 LOG5 finish_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2012-Jan-09 05:26:46 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 05:26:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:26:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 05:26:46 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2012-Jan-09 05:26:46 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 05:26:46 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2012-Jan-09 05:26:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 05:26:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 05:26:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:26:46 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 05:26:46 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Jan-09 05:26:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 05:26:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:26:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:26:48 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:26:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 05:26:48 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2012-Jan-09 05:26:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 05:26:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:26:48 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 05:26:48 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:26:48 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Jan-09 05:26:48 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:26:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:26:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:26:48 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2012-Jan-09 05:26:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:26:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 05:26:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:26:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:26:48 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:26:48 LOG5 begin_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2012-Jan-09 05:26:48 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:26:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:26:48 LOG5 end_task: Level: (4) ID = <10288> Status = 0 0 0 0 ok 2012-Jan-09 05:26:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:26:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:26:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 05:26:48 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2012-Jan-09 05:26:48 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2012-Jan-09 05:26:48 INFO2 astwait: Waiting for 3 seconds from 09:26:48 to 09:26:51 UTC ... 2012-Jan-09 05:26:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 3 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 05:26:48 START begin_task: Starting task 'waiting on waiting for AST time' 2012-Jan-09 05:26:48 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2012-Jan-09 05:26:51 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 INFO3 astwait: Finished waiting 2012-Jan-09 05:26:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:26:51 LOG5 dopset_later: Calling 'dopset_later 61.085854894775373' 2012-Jan-09 05:26:51 INFO3 dopset_later: Setting Doppler correction for 05:27:51 (61.1 seconds from now) 2012-Jan-09 05:26:51 LOG5 antvel: Calling 'antvel 104.660000 9.560755 F Heliocentric 61.085854894775373' 2012-Jan-09 05:26:51 LOG2 antvel: Transforming current Az = 104.66 ZA = 9.56 to apparent RA = 11:34:39.1 Dec = +20:30:44.0 2012-Jan-09 05:26:51 LOG2 antvel: Parameters to Doppler: Heliocentric 34071 2012 9 0.0 2012-Jan-09 05:26:51 INFO5 antvel: Computed antenna velocity: -24.42179 km/s 2012-Jan-09 05:26:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.421790804600001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 05:26:51 INFO4 dopset_gen: New sky frequencies: 1381.355957 1381.355957 1381.355957 1381.355957 1381.355957 1381.355957 1381.355957 1381.355957 1381.355957 2012-Jan-09 05:26:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355957 sky0=1381.355957 sky1=1381.355957 sky2=1381.355957 sky3=1381.355957 sky4=1381.355957 sky5=1381.355957 sky6=1381.355957 sky7=1381.355957 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 05:26:51 LOG2 dopset_gen: Result from 'sky2syn': 1631.355957 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355957.0} 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 05:26:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 05:26:51 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 05:26:51 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:03.3 Dec = +20:34:43.4 2012-Jan-09 05:26:51 LOG3 track_source: Calling 'track_source AGES1367_p1_051 113303.3 203443.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:26:51 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:26:51 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_051} INFO {Slewing to source 'AGES1367_p1_051' ...} 2012-Jan-09 05:26:51 INFO1 track_source: Starting to track AGES1367_p1_051 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_051" 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: set ra 113303.3 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: set dec 203443.4 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: pnt tr 113303.3 203443.4 -CJ 2012-Jan-09 05:26:51 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:26:51 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:26:51 LOG5 finish_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:26:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:26:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:26:51 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 05:26:51 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 05:26:51 LOG3 waittrk: Start waittrk 5 2012-Jan-09 05:26:51 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 05:26:51 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355957.0} 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_051" 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: set ra 113303.3 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: set dec 203443.4 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: pnt tr 113303.3 203443.4 -CJ 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: 113303.3 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: vw% 203443.4 2012-Jan-09 05:26:51 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% 2012-Jan-09 05:26:56 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 05:26:56 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2012-Jan-09 05:26:56 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 05:26:56 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2012-Jan-09 05:26:58 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 05:26:58 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2012-Jan-09 05:26:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:26:58 INFO2 waittrk: Now tracking AGES1367_p1_051 2012-Jan-09 05:26:58 LOG4 waittrk: Current telescope position: Az = 104.41 ZA = 9.58 2012-Jan-09 05:26:58 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 05:26:58 LOG5 finish_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2012-Jan-09 05:26:58 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 05:26:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:26:58 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 05:26:58 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2012-Jan-09 05:26:58 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 05:26:58 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2012-Jan-09 05:26:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 05:26:58 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 05:26:58 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 05:26:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 05:26:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:26:58 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 05:26:58 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Jan-09 05:26:58 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 05:26:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:27:01 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:27:01 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:27:01 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 05:27:01 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2012-Jan-09 05:27:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 05:27:01 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 05:27:01 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2012-Jan-09 05:27:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 05:27:01 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:27:01 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:27:01 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:27:01 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:27:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 05:27:02 LOG5 begin_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2012-Jan-09 05:27:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 05:27:02 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:27:02 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Jan-09 05:27:02 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 4 dB 2012-Jan-09 05:27:02 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2012-Jan-09 05:27:02 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2012-Jan-09 05:27:02 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 05:27:02 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 05:27:02 LOG5 end_task: Level: (5) ID = <10297> Status = 0 0 0 0 ok 2012-Jan-09 05:27:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.072 1.080 ALFA beam 1: 0.910 0.900 2012-Jan-09 05:27:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.958 0.981 ALFA beam 3: 1.036 0.897 2012-Jan-09 05:27:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.833 1.058 ALFA beam 5: 0.953 0.863 2012-Jan-09 05:27:02 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.107 0.014 ALFA beam 7: 0.962 0.014 2012-Jan-09 05:27:02 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 05:27:02 LOG5 finish_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2012-Jan-09 05:27:02 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 05:27:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:27:02 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 05:27:02 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2012-Jan-09 05:27:02 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 05:27:02 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2012-Jan-09 05:27:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 05:27:02 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 05:27:02 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 05:27:02 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 05:27:02 LOG5 begin_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2012-Jan-09 05:27:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 05:27:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.080 0.910 0.900 2012-Jan-09 05:27:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.981 1.036 0.897 2012-Jan-09 05:27:03 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.058 0.953 0.863 2012-Jan-09 05:27:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.014 0.962 0.014 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.1 27.4 B 30.5 30.6 mn:A 0.0 -0.1 B -0.3 -0.3 gn: 11 11 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b0s1g0 rms:A 32.0 30.6 B 28.6 30.3 mn:A 0.2 -0.4 B -0.5 0.1 gn: 12 11 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b1s0g0 rms:A 30.7 28.7 B 32.6 28.4 mn:A 0.6 0.6 B 0.1 0.1 gn: 7 11 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b1s1g0 rms:A 30.4 28.0 B 31.0 31.0 mn:A -0.4 -0.3 B 0.5 0.2 gn: 8 10 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.2 28.4 B 28.1 29.5 mn:A 0.0 -0.3 B 0.3 0.2 gn: 10 11 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b2s1g0 rms:A 30.2 30.5 B 32.7 30.4 mn:A 0.3 -0.3 B 0.3 0.3 gn: 11 12 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b3s0g0 rms:A 28.8 28.5 B 31.2 27.9 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 12 12 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.4 29.8 B 29.8 31.0 mn:A -0.3 0.4 B 0.2 0.2 gn: 12 12 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.4 29.5 B 31.0 31.1 mn:A -0.2 -0.2 B -0.4 0.0 gn: 13 12 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.8 29.8 B 30.0 28.9 mn:A 0.0 -0.1 B -0.3 0.2 gn: 16 13 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b5s0g0 rms:A 29.5 28.4 B 31.1 31.1 mn:A 0.7 0.4 B -0.0 0.4 gn: 12 11 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b5s1g0 rms:A 30.5 30.4 B 28.3 28.0 mn:A -0.3 0.2 B 0.2 0.2 gn: 12 10 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b6s0g0 rms:A 32.7 29.9 B 15.2 15.7 mn:A -0.3 0.2 B 0.3 -0.3 gn: 13 31 2012-Jan-09 05:27:09 INFO3 from_mock: From MOCK: b6s1g0 rms:A 30.0 27.2 B 12.2 11.8 mn:A 0.7 0.6 B 0.1 0.2 gn: 13 31 2012-Jan-09 05:27:09 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 05:27:09 LOG5 end_task: Level: (5) ID = <10299> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 05:27:09 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 05:27:09 LOG5 finish_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 05:27:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:27:09 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 05:27:09 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 05:27:09 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 05:27:09 LOG5 finish_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 05:27:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:27:09 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 05:27:09 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 05:27:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 05:27:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 05:27:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 05:27:09 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 05:27:09 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 05:27:09 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 05:27:09 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 05:27:09 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 05:27:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 05:27:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:27:09 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 05:27:09 LOG5 begin_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Jan-09 05:27:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 05:27:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 05:27:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:27:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:27:10 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (5) ID = <10302> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 05:27:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:27:10 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 05:27:10 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:27:10 LOG5 begin_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:27:10 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (5) ID = <10303> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:27:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 05:27:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:27:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:27:10 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:27:10 LOG5 begin_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (5) ID = <10304> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:27:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2012-Jan-09 05:27:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2012-Jan-09 05:27:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2012-Jan-09 05:27:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 05:27:10 LOG5 begin_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 05:27:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2012-Jan-09 05:27:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (4) ID = <10305> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG4 take_data: Calling 'take_data 5 5 CAL ON stat_cal_on {CAL-ON spectra}' 2012-Jan-09 05:27:10 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 05:27:10 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2012-Jan-09 05:27:10 LOG5 log_alfabeam: Parameters: 11.550916666666668 20.578722222222222 12.224717 2012.0252626942479 -84.100037 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 0 11.550916666666671 20.578722222222218 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 1 11.549063525638585 20.669349895997417 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 2 11.543637206415056 20.608710980938760 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 3 11.545534602365485 20.517770395035022 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 4 11.552828008956158 20.488683705523201 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 5 11.558196758035898 20.548864435694291 2012-Jan-09 05:27:10 LOG4 log_alfabeam: ALFABEAM 6 11.556329157751057 20.638591516452461 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_051 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: scantype=ON 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: patternid=200900115 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: scanid=200900116 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355957.0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355957.0 2012-Jan-09 05:27:10 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 05:27:10 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 05:27:10 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_051:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=ON:patternid=200900115:scanid=200900116:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355957.0:topobfreqhz=1306355957.0:filetype=1 2012-Jan-09 05:27:10 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 05:27:10 LOG5 begin_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (5) ID = <10307> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 05:27:10 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 05:27:10 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 05:27:10 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 05:27:10 LOG5 begin_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20120109.a2048.0006.fits 2012-Jan-09 05:27:10 LOG4 from_mock: From MOCK: starok 2012-Jan-09 05:27:10 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 05:27:10 LOG5 end_task: Level: (5) ID = <10308> Status = 0 0 0 0 ok 2012-Jan-09 05:27:10 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 05:27:10 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900116 2012-Jan-09 05:27:11 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 05:27:11 LOG5 begin_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2012-Jan-09 05:27:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20120109.a2048.0006.fits} 2012-Jan-09 05:27:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 05:27:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 05:27:11 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 05:27:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2012-Jan-09 05:27:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34032.00 2012-Jan-09 05:27:13 INFO2 got_mock_message: Mock spectrometer start file number is 01800 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 05:27:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 05:27:13 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:13 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:16 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:27:16.01 2012-Jan-09 05:27:16 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326101236.01 Mon Jan 9 05:27:16 2012 2012-Jan-09 05:27:16 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355957 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 05:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.014 and 1.487 (still bad) 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 05:27:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 05:27:22 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 05:27:22 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 05:27:22 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 05:27:22 LOG5 end_task: Level: (5) ID = <10309> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 05:27:22 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2012-Jan-09 05:27:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2012-Jan-09 05:27:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2012-Jan-09 05:27:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2012-Jan-09 05:27:22 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG3 CALCONTROL-caltrig: Software trigger 2012-Jan-09 05:27:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2012-Jan-09 05:27:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2012-Jan-09 05:27:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2012-Jan-09 05:27:22 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG4 take_data: Calling 'take_data 5 5 CAL OFF stat_cal_off {CAL-OFF spectra}' 2012-Jan-09 05:27:22 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 05:27:22 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF spectra ...} 2012-Jan-09 05:27:22 LOG5 log_alfabeam: Parameters: 11.550916666666668 20.578722222222222 12.227781 2012.025263042817 -84.100037 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 0 11.550916666666671 20.578722222222218 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 1 11.549056018354330 20.669318810569283 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 2 11.543634767334103 20.608593794303321 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 3 11.545539501785246 20.517686456134257 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 4 11.552835191257564 20.488713077118923 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 5 11.558199175644724 20.548980744494887 2012-Jan-09 05:27:22 LOG4 log_alfabeam: ALFABEAM 6 11.556324228725533 20.638680592170303 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_051 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: obsmode=CAL 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: scantype=OFF 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: patternid=200900115 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: scanid=200900117 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355957.0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355957.0 2012-Jan-09 05:27:22 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 05:27:22 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 05:27:22 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_051:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=CAL:scantype=OFF:patternid=200900115:scanid=200900117:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355957.0:topobfreqhz=1306355957.0:filetype=1 2012-Jan-09 05:27:22 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 05:27:22 LOG5 begin_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 05:27:22 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 05:27:22 LOG5 end_task: Level: (5) ID = <10312> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 05:27:22 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 05:27:22 LOG3 socket_wait: To MOCK: STAR5 2012-Jan-09 05:27:22 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 05:27:22 LOG5 begin_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG4 from_mock: From MOCK: starok 2012-Jan-09 05:27:22 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 05:27:22 LOG5 end_task: Level: (5) ID = <10313> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 05:27:22 INFO2 take_data: Starting WAPP+Mock 5-second scan: 200900117 2012-Jan-09 05:27:22 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 05:27:22 LOG5 begin_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2012-Jan-09 05:27:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 05:27:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 5 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF spectra ...} 2012-Jan-09 05:27:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34043.00 2012-Jan-09 05:27:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 05:27:23 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 05:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.560 (still bad) 2012-Jan-09 05:27:25 INFO2 got_mock_message: Mock spectrometer start file number is 01900 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 05:27:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 5.0 s 2012-Jan-09 05:27:25 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:25 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.00 GB 2012-Jan-09 05:27:28 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:27:28.01 2012-Jan-09 05:27:28 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326101248.01 Mon Jan 9 05:27:28 2012 2012-Jan-09 05:27:28 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355957 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 05:27:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:28 INFO1 WAPP=1+2+3+4-start_spectra: Skipping Tsys 2012-Jan-09 05:27:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 05:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2012-Jan-09 05:27:34 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 05:27:34 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 05:27:34 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 05:27:34 LOG5 end_task: Level: (5) ID = <10314> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 05:27:34 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 05:27:34 STOP finish_task: Finishing task 'WAPP+Mock calibration' 2012-Jan-09 05:27:34 LOG5 finish_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 INFO2 finish_task: DONE finished calibration: WAPP+Mock calibration 2012-Jan-09 05:27:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:27:34 STOP end_task: Finishing task 'WAPP+Mock calibration' with status 'OK' 2012-Jan-09 05:27:34 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 LOG4 send_obs_status: To obs_status: <1> INFO {Returning to drift position} 2012-Jan-09 05:27:34 INFO4 fixed_driftmap: Sending telescope back to drift position Az = 104.66 and ZA = 9.56 2012-Jan-09 05:27:34 LOG3 track_source: Calling 'track_source AGES1367_p1_051 104.66 9.5607549911 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:27:34 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:27:34 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_051} INFO {Slewing to source 'AGES1367_p1_051' ...} 2012-Jan-09 05:27:34 INFO1 track_source: Starting to track AGES1367_p1_051 2012-Jan-09 05:27:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_051" 2012-Jan-09 05:27:34 LOG3 vw_send: To DATATAKING: set ra 104.66 2012-Jan-09 05:27:34 LOG3 vw_send: To DATATAKING: set dec 9.5607549911 2012-Jan-09 05:27:34 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:27:34 LOG3 vw_send: To DATATAKING: pnt tr 104.66 9.5607549911 -CF 2012-Jan-09 05:27:34 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:27:34 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:27:34 LOG5 finish_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:27:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:27:34 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:27:34 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 LOG1 fixed_driftmap: Parameters: HA = +00:39:30.9 Start = 12:14:10.2 LST = 12:13:52.0 diff = 18.1 secs 2012-Jan-09 05:27:34 INFO2 fixed_driftmap: Waiting 16.1 seconds for RA 11:34:39 2012-Jan-09 05:27:34 INFO2 lstwait: Waiting for 16.1 secs from LST 12:13:52 to LST 12:14:08 ... 2012-Jan-09 05:27:34 LOG4 send_obs_status: To obs_status: <1> TASKTIME 16.088252727098091 BITMAP stat_wait MESSAGE {Waiting ...} 2012-Jan-09 05:27:34 START begin_task: Starting task 'waiting on wait on LST' 2012-Jan-09 05:27:34 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_051" 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: set ra 104.66 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: set dec 9.5607549911 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: vw% 104.66 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: vw% 9.5607549911 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: pnt tr 104.66 9.5607549911 -CF 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:27:34 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.105 (still bad) 2012-Jan-09 05:27:50 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2012-Jan-09 05:27:50 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2012-Jan-09 05:27:50 LOG4 lstwait: Finished waiting 0.91 seconds late 2012-Jan-09 05:27:50 INFO3 lstwait: Finished waiting 2012-Jan-09 05:27:50 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:27:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 1 2012-Jan-09 05:27:50 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2012-Jan-09 05:27:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan} 2012-Jan-09 05:27:50 LOG4 take_data: Calling 'take_data 1200 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2012-Jan-09 05:27:50 START begin_task: Starting task 'WAPP+Mock spectral observation' 2012-Jan-09 05:27:50 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2012-Jan-09 05:27:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2012-Jan-09 05:27:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: PSETpsetgrp=g0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: projid=a2048 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: obsnm=Israel cabrera 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: object=AGES1367_p1_051 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: frontend=alfa 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: caltype=hcorcal 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: req_sys=BARYCENT 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: req_vel=8500000.0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: req_vel_unit=m/s 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: req_vel_type=VOPT-F2W 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: obsmode=FIXEDAZ 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: scantype=FIXEDAZ 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: patternid=200900118 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: scanid=200900118 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: prfeed=0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: restafreqhz=1495405752.0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: restbfreqhz=1345405752.0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: topoafreqhz=1456355957.0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: topobfreqhz=1306355957.0 2012-Jan-09 05:27:50 LOG3 take_mock_data: PSET configuration: filetype=1 2012-Jan-09 05:27:50 LOG2 socket_wait: Starting sockwait on MOCK for 'send Mock spectrometer group 1 parameters' using string 'pset' 2012-Jan-09 05:27:50 LOG3 socket_wait: To MOCK: PSETpsetgrp=g0:projid=a2048:obsnm=Israel cabrera:object=AGES1367_p1_051:frontend=alfa:caltype=hcorcal:req_sys=BARYCENT:req_vel=8500000.0:req_vel_unit=m/s:req_vel_type=VOPT-F2W:obsmode=FIXEDAZ:scantype=FIXEDAZ:patternid=200900118:scanid=200900118:prfeed=0:restafreqhz=1495405752.0:restbfreqhz=1345405752.0:topoafreqhz=1456355957.0:topobfreqhz=1306355957.0:filetype=1 2012-Jan-09 05:27:50 START begin_task: Starting task 'waiting on send Mock spectrometer group 1 parameters' 2012-Jan-09 05:27:50 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Jan-09 05:27:50 LOG4 from_mock: From MOCK: psetok 2012-Jan-09 05:27:50 STOP end_task: Finishing task 'waiting on send Mock spectrometer group 1 parameters' with status 'OK' 2012-Jan-09 05:27:50 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2012-Jan-09 05:27:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'send Mock spectrometer group 1 parameters' 2012-Jan-09 05:27:50 LOG2 socket_wait: Starting sockwait on MOCK for 'start Mock spectrometer data taking' using string 'star' 2012-Jan-09 05:27:50 LOG3 socket_wait: To MOCK: STAR1200 2012-Jan-09 05:27:50 START begin_task: Starting task 'waiting on start Mock spectrometer data taking' 2012-Jan-09 05:27:50 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Jan-09 05:27:50 LOG4 from_mock: From MOCK: starok 2012-Jan-09 05:27:50 STOP end_task: Finishing task 'waiting on start Mock spectrometer data taking' with status 'OK' 2012-Jan-09 05:27:50 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2012-Jan-09 05:27:50 LOG3 socket_wait: DONE with sockwait on MOCK for 'start Mock spectrometer data taking' 2012-Jan-09 05:27:50 INFO2 take_data: Starting WAPP+Mock 1200-second scan: 200900118 2012-Jan-09 05:27:51 START begin_task: Starting task 'waiting on WAPP+Mock spectra' 2012-Jan-09 05:27:51 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2012-Jan-09 05:27:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all 2012-Jan-09 05:27:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2012-Jan-09 05:27:51 LOG4 from_mock: From MOCK: infook pnetg0:Connected to all psrv 2012-Jan-09 05:27:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1200 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2012-Jan-09 05:27:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 34072.00 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1631.355957 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2012-Jan-09 05:27:53 INFO2 got_mock_message: Mock spectrometer start file number is 02000 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0:1.00 integrations per second 2012-Jan-09 05:27:53 LOG2 from_mock: From MOCK: infook pnetg0:Estimated dump time 1200.0 s 2012-Jan-09 05:27:53 LOG2 from_mock: From MOCK: infook pnetg0:Estimated total dump size 1.10 GB 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0:Spectrometer box bandwidth estimates: 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-103 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-107 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1148.000000 MHz 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-109 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-110 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-112 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-116 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdev-118 0.13 MB/s 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0:Fileserver bandwidth and dump size estimates: 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs1.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs2.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs3.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1381.355957 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs4.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs5.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs6.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 LOG3 from_mock: From MOCK: infook pnetg0: pdevs7.pdev.naic.edu 0.13 MB/s, 0.16 GB 2012-Jan-09 05:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Jan-09 05:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Jan-09 05:27:56 INFO1 got_mock_message: Started Mock spectrometer pnetg0 at 05:27:56.01 2012-Jan-09 05:27:56 LOG4 from_mock: From MOCK: infook pnetg0:Observation begins at 1326101276.01 Mon Jan 9 05:27:56 2012 2012-Jan-09 05:27:56 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers running... 2012-Jan-09 05:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.112 (still bad) 2012-Jan-09 05:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Jan-09 05:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.113 (still bad) 2012-Jan-09 05:28:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.019 < 0.75)! 2012-Jan-09 05:28:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.081 0.914 0.903 2012-Jan-09 05:28:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.978 1.037 0.898 2012-Jan-09 05:28:04 LOG4 check_wapp_levels: WAPP-3 power levels: 0.833 1.057 0.954 0.878 2012-Jan-09 05:28:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.022 0.968 0.019 2012-Jan-09 05:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2012-Jan-09 05:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Jan-09 05:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Jan-09 05:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.114 (still bad) 2012-Jan-09 05:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Jan-09 05:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Jan-09 05:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.111 (still bad) 2012-Jan-09 05:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Jan-09 05:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.111 (still bad) 2012-Jan-09 05:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Jan-09 05:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Jan-09 05:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2012-Jan-09 05:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.109 (still bad) 2012-Jan-09 05:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.106 (still bad) 2012-Jan-09 05:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.110 (still bad) 2012-Jan-09 05:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Jan-09 05:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.108 (still bad) 2012-Jan-09 05:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.113 (still bad) 2012-Jan-09 05:29:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.025 < 0.75)! 2012-Jan-09 05:29:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.087 0.917 0.907 2012-Jan-09 05:29:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.982 1.039 0.898 2012-Jan-09 05:29:06 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.059 0.960 0.881 2012-Jan-09 05:29:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.025 0.964 0.026 2012-Jan-09 05:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Jan-09 05:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Jan-09 05:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Jan-09 05:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Jan-09 05:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Jan-09 05:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.106 (still bad) 2012-Jan-09 05:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Jan-09 05:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.107 (still bad) 2012-Jan-09 05:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.109 (still bad) 2012-Jan-09 05:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 05:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.107 (still bad) 2012-Jan-09 05:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Jan-09 05:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Jan-09 05:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.109 (still bad) 2012-Jan-09 05:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.110 (still bad) 2012-Jan-09 05:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Jan-09 05:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.106 (still bad) 2012-Jan-09 05:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Jan-09 05:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.107 (still bad) 2012-Jan-09 05:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2012-Jan-09 05:30:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.020 < 0.75)! 2012-Jan-09 05:30:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.091 0.915 0.902 2012-Jan-09 05:30:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.982 1.038 0.898 2012-Jan-09 05:30:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.058 0.956 0.878 2012-Jan-09 05:30:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.110 0.020 0.965 0.021 2012-Jan-09 05:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.112 (still bad) 2012-Jan-09 05:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Jan-09 05:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Jan-09 05:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.116 (still bad) 2012-Jan-09 05:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.110 (still bad) 2012-Jan-09 05:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Jan-09 05:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Jan-09 05:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Jan-09 05:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2012-Jan-09 05:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Jan-09 05:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.030 and 1.116 (still bad) 2012-Jan-09 05:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Jan-09 05:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Jan-09 05:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.112 (still bad) 2012-Jan-09 05:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Jan-09 05:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.109 (still bad) 2012-Jan-09 05:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.116 (still bad) 2012-Jan-09 05:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Jan-09 05:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.109 (still bad) 2012-Jan-09 05:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.111 (still bad) 2012-Jan-09 05:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.108 (still bad) 2012-Jan-09 05:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.110 (still bad) 2012-Jan-09 05:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.111 (still bad) 2012-Jan-09 05:31:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.029 < 0.75)! 2012-Jan-09 05:31:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.080 0.909 0.900 2012-Jan-09 05:31:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.980 1.037 0.896 2012-Jan-09 05:31:08 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.051 0.956 0.877 2012-Jan-09 05:31:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.029 0.962 0.029 2012-Jan-09 05:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.113 (still bad) 2012-Jan-09 05:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.109 (still bad) 2012-Jan-09 05:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.110 (still bad) 2012-Jan-09 05:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.029 and 1.111 (still bad) 2012-Jan-09 05:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.116 (still bad) 2012-Jan-09 05:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.118 (still bad) 2012-Jan-09 05:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.117 (still bad) 2012-Jan-09 05:32:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:32:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.078 0.910 0.897 2012-Jan-09 05:32:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.977 1.037 0.894 2012-Jan-09 05:32:10 LOG4 check_wapp_levels: WAPP-3 power levels: 0.836 1.053 0.954 0.876 2012-Jan-09 05:32:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.119 0.028 0.971 0.028 2012-Jan-09 05:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.120 (still bad) 2012-Jan-09 05:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.124 (still bad) 2012-Jan-09 05:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.132 (still bad) 2012-Jan-09 05:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.140 (still bad) 2012-Jan-09 05:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.145 (still bad) 2012-Jan-09 05:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.149 (still bad) 2012-Jan-09 05:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.150 (still bad) 2012-Jan-09 05:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.147 (still bad) 2012-Jan-09 05:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.141 (still bad) 2012-Jan-09 05:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.135 (still bad) 2012-Jan-09 05:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.126 (still bad) 2012-Jan-09 05:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.119 (still bad) 2012-Jan-09 05:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.113 (still bad) 2012-Jan-09 05:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:33:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:33:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.068 0.913 0.897 2012-Jan-09 05:33:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.979 1.037 0.894 2012-Jan-09 05:33:11 LOG4 check_wapp_levels: WAPP-3 power levels: 0.837 1.054 0.953 0.874 2012-Jan-09 05:33:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.109 0.028 0.964 0.028 2012-Jan-09 05:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.115 (still bad) 2012-Jan-09 05:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 05:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.115 (still bad) 2012-Jan-09 05:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.109 (still bad) 2012-Jan-09 05:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.113 (still bad) 2012-Jan-09 05:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:34:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:34:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.068 0.908 0.893 2012-Jan-09 05:34:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.975 1.033 0.892 2012-Jan-09 05:34:12 LOG4 check_wapp_levels: WAPP-3 power levels: 0.835 1.048 0.952 0.873 2012-Jan-09 05:34:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.028 0.965 0.028 2012-Jan-09 05:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.110 (still bad) 2012-Jan-09 05:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Jan-09 05:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2012-Jan-09 05:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.106 (still bad) 2012-Jan-09 05:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.104 (still bad) 2012-Jan-09 05:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.023 and 1.105 (still bad) 2012-Jan-09 05:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.111 (still bad) 2012-Jan-09 05:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 05:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 05:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 05:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.102 (still bad) 2012-Jan-09 05:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.105 (still bad) 2012-Jan-09 05:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 05:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2012-Jan-09 05:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:35:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:35:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.065 0.908 0.887 2012-Jan-09 05:35:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.969 1.030 0.889 2012-Jan-09 05:35:15 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.042 0.949 0.869 2012-Jan-09 05:35:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.104 0.028 0.960 0.028 2012-Jan-09 05:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 05:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:36:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:36:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.065 0.905 0.889 2012-Jan-09 05:36:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.970 1.029 0.889 2012-Jan-09 05:36:17 LOG4 check_wapp_levels: WAPP-3 power levels: 0.832 1.045 0.950 0.870 2012-Jan-09 05:36:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.102 0.027 0.960 0.027 2012-Jan-09 05:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:09 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 05:37:09.301 (seconds: 20229.301)!} 2012-Jan-09 05:37:09 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 05:37:09.301 (seconds: 20229.301)! 2012-Jan-09 05:37:10 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 20228.0 to 20229.0! 2012-Jan-09 05:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:11 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (20228.0 - 20230.0)! 2012-Jan-09 05:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:37:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:37:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.068 0.912 0.890 2012-Jan-09 05:37:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.967 1.028 0.888 2012-Jan-09 05:37:18 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.041 0.950 0.868 2012-Jan-09 05:37:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.027 0.960 0.027 2012-Jan-09 05:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 05:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:38:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.067 0.909 0.889 2012-Jan-09 05:38:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.971 1.035 0.890 2012-Jan-09 05:38:19 LOG4 check_wapp_levels: WAPP-3 power levels: 0.834 1.048 0.957 0.874 2012-Jan-09 05:38:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.114 0.027 0.969 0.027 2012-Jan-09 05:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.112 (still bad) 2012-Jan-09 05:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.114 (still bad) 2012-Jan-09 05:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.111 (still bad) 2012-Jan-09 05:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 05:39:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:39:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.061 0.903 0.883 2012-Jan-09 05:39:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.965 1.030 0.886 2012-Jan-09 05:39:21 LOG4 check_wapp_levels: WAPP-3 power levels: 0.829 1.040 0.947 0.867 2012-Jan-09 05:39:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.027 0.962 0.027 2012-Jan-09 05:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.108 (still bad) 2012-Jan-09 05:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.103 (still bad) 2012-Jan-09 05:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Jan-09 05:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.106 (still bad) 2012-Jan-09 05:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.104 (still bad) 2012-Jan-09 05:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.105 (still bad) 2012-Jan-09 05:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.108 (still bad) 2012-Jan-09 05:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Jan-09 05:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.101 (still bad) 2012-Jan-09 05:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.104 (still bad) 2012-Jan-09 05:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.103 (still bad) 2012-Jan-09 05:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.105 (still bad) 2012-Jan-09 05:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.110 (still bad) 2012-Jan-09 05:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.104 (still bad) 2012-Jan-09 05:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 05:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.107 (still bad) 2012-Jan-09 05:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 05:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.103 (still bad) 2012-Jan-09 05:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.110 (still bad) 2012-Jan-09 05:40:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:40:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.063 0.903 0.885 2012-Jan-09 05:40:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.966 1.030 0.887 2012-Jan-09 05:40:22 LOG4 check_wapp_levels: WAPP-3 power levels: 0.830 1.039 0.947 0.865 2012-Jan-09 05:40:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.027 0.959 0.027 2012-Jan-09 05:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 05:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:41:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:41:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.056 0.904 0.884 2012-Jan-09 05:41:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.964 1.024 0.883 2012-Jan-09 05:41:23 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 1.038 0.945 0.866 2012-Jan-09 05:41:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.028 0.958 0.028 2012-Jan-09 05:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 05:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 05:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2012-Jan-09 05:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:42:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:42:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.054 0.903 0.887 2012-Jan-09 05:42:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.967 1.027 0.885 2012-Jan-09 05:42:25 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.043 0.949 0.867 2012-Jan-09 05:42:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.103 0.028 0.959 0.028 2012-Jan-09 05:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2012-Jan-09 05:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 05:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.106 (still bad) 2012-Jan-09 05:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.105 (still bad) 2012-Jan-09 05:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.107 (still bad) 2012-Jan-09 05:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.109 (still bad) 2012-Jan-09 05:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.108 (still bad) 2012-Jan-09 05:43:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:43:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.054 0.905 0.884 2012-Jan-09 05:43:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.966 1.026 0.884 2012-Jan-09 05:43:26 LOG4 check_wapp_levels: WAPP-3 power levels: 0.828 1.038 0.949 0.865 2012-Jan-09 05:43:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.107 0.027 0.962 0.027 2012-Jan-09 05:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.103 (still bad) 2012-Jan-09 05:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 05:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.102 (still bad) 2012-Jan-09 05:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.097 (still bad) 2012-Jan-09 05:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.098 (still bad) 2012-Jan-09 05:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.099 (still bad) 2012-Jan-09 05:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:44:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:44:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.061 0.903 0.884 2012-Jan-09 05:44:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.968 1.031 0.889 2012-Jan-09 05:44:27 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 1.031 0.944 0.865 2012-Jan-09 05:44:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.027 0.957 0.028 2012-Jan-09 05:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.100 (still bad) 2012-Jan-09 05:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.101 (still bad) 2012-Jan-09 05:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.098 (still bad) 2012-Jan-09 05:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Jan-09 05:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.100 (still bad) 2012-Jan-09 05:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 1.099 (still bad) 2012-Jan-09 05:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.102 (still bad) 2012-Jan-09 05:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Jan-09 05:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.101 (still bad) 2012-Jan-09 05:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.098 (still bad) 2012-Jan-09 05:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.020 and 1.099 (still bad) 2012-Jan-09 05:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2012-Jan-09 05:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.097 (still bad) 2012-Jan-09 05:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.102 (still bad) 2012-Jan-09 05:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.099 (still bad) 2012-Jan-09 05:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 1.100 (still bad) 2012-Jan-09 05:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.104 (still bad) 2012-Jan-09 05:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.100 (still bad) 2012-Jan-09 05:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Jan-09 05:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.099 (still bad) 2012-Jan-09 05:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Jan-09 05:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.024 and 1.098 (still bad) 2012-Jan-09 05:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.025 and 1.100 (still bad) 2012-Jan-09 05:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 05:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.098 (still bad) 2012-Jan-09 05:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.100 (still bad) 2012-Jan-09 05:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.026 and 1.097 (still bad) 2012-Jan-09 05:45:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.026 < 0.75)! 2012-Jan-09 05:45:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.055 0.902 0.882 2012-Jan-09 05:45:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.968 1.024 0.885 2012-Jan-09 05:45:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.825 1.034 0.945 0.865 2012-Jan-09 05:45:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.098 0.026 0.956 0.027 2012-Jan-09 05:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.022 and 1.100 (still bad) 2012-Jan-09 05:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2012-Jan-09 05:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2012-Jan-09 05:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2012-Jan-09 05:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2012-Jan-09 05:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2012-Jan-09 05:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.100 (still bad) 2012-Jan-09 05:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.102 (still bad) 2012-Jan-09 05:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.105 (still bad) 2012-Jan-09 05:46:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.028 < 0.75)! 2012-Jan-09 05:46:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.067 0.907 0.888 2012-Jan-09 05:46:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.970 1.030 0.890 2012-Jan-09 05:46:32 LOG4 check_wapp_levels: WAPP-3 power levels: 0.827 1.042 0.954 0.871 2012-Jan-09 05:46:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.113 0.028 0.970 0.028 2012-Jan-09 05:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.107 (still bad) 2012-Jan-09 05:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.108 (still bad) 2012-Jan-09 05:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.112 (still bad) 2012-Jan-09 05:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.110 (still bad) 2012-Jan-09 05:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.111 (still bad) 2012-Jan-09 05:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.114 (still bad) 2012-Jan-09 05:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.106 (still bad) 2012-Jan-09 05:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.101 (still bad) 2012-Jan-09 05:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2012-Jan-09 05:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.099 (still bad) 2012-Jan-09 05:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.104 (still bad) 2012-Jan-09 05:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2012-Jan-09 05:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.098 (still bad) 2012-Jan-09 05:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2012-Jan-09 05:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2012-Jan-09 05:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2012-Jan-09 05:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.097 (still bad) 2012-Jan-09 05:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2012-Jan-09 05:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2012-Jan-09 05:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.103 (still bad) 2012-Jan-09 05:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2012-Jan-09 05:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.094 (still bad) 2012-Jan-09 05:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.096 (still bad) 2012-Jan-09 05:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2012-Jan-09 05:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.028 and 1.095 (still bad) 2012-Jan-09 05:47:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.027 < 0.75)! 2012-Jan-09 05:47:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.057 0.903 0.883 2012-Jan-09 05:47:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.972 1.030 0.890 2012-Jan-09 05:47:33 LOG4 check_wapp_levels: WAPP-3 power levels: 0.826 1.041 0.952 0.871 2012-Jan-09 05:47:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.101 0.027 0.960 0.028 2012-Jan-09 05:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 05:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 05:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.096 (still bad) 2012-Jan-09 05:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.093 (still bad) 2012-Jan-09 05:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 05:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.101 (still bad) 2012-Jan-09 05:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 05:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 05:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.095 (still bad) 2012-Jan-09 05:47:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2012-Jan-09 05:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 05:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 05:47:57 LOG4 from_mock: From MOCK: infook pnetg0:All spectrometers finished 2012-Jan-09 05:47:57 INFO1 got_mock_message: From MOCK: DONE with observation 2012-Jan-09 05:47:57 STOP end_task: Finishing task 'waiting on WAPP+Mock spectra' with status 'OK' 2012-Jan-09 05:47:57 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2012-Jan-09 05:47:57 STOP end_task: Finishing task 'WAPP+Mock spectral observation' with status 'OK' 2012-Jan-09 05:47:57 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2012-Jan-09 05:47:57 STOP finish_task: Finishing task 'fixed azimuth drift map' 2012-Jan-09 05:47:57 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2012-Jan-09 05:47:57 DONE finish_task: DONE finished pattern: fixed azimuth drift map 2012-Jan-09 05:47:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2012-Jan-09 05:47:57 END end_task: Finishing task 'fixed azimuth drift map' with status 'OK' 2012-Jan-09 05:47:57 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2012-Jan-09 05:47:57 COMMAND run_command_line: EXECUTING command 69: 'ENDIF' 2012-Jan-09 05:47:57 COMMAND run_command_line: EXECUTING command 72: 'IF LSTSLEW(AGES1367_p1_053) < 123738 THEN' 2012-Jan-09 05:47:58 LOG3 is_if_valid: Current source data: up 101.0 14.2 UP - - 23 1.9 2012-Jan-09 05:47:58 INFO5 is_if_valid: Evaluating condition: LSTSLEW(AGES1367_p1_053) < 123738 2012-Jan-09 05:47:58 INFO5 is_if_valid: Condition parsed as: 12.603442666666666 < 12.627222222222223 2012-Jan-09 05:47:58 COMMAND run_command_line: EXECUTING command 73: 'FIXEDDRIFT az=100.66 alfaangle=-77.2 epoch=J velocity=8500.0 velframe=Heliocentric secs=1200 source=AGES1367_p1_053 ra=113400.00 dec=203200.00' 2012-Jan-09 05:47:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'fixed azimuth drift map' 2012-Jan-09 05:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.027 and 1.094 (still bad) 2012-Jan-09 05:47:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2012-Jan-09 05:47:58 LOG1 fixed_driftmap: Calling 'fixed_driftmap fixed 1 1200 100.66 -77.2 hcorcal 5 tracking no off lcorcal first 1 AGES1367_p1_053 113400.00 203200.00 J 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:47:58 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2012-Jan-09 05:47:58 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2012-Jan-09 05:47:58 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP+Mock' on 'AGES1367_p1_051' 2012-Jan-09 05:47:58 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2012-Jan-09 05:47:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 1 INFO {Starting fixed azimuth drift map observation ...} SOURCE {AGES1367_p1_053} 2012-Jan-09 05:47:59 INFO3 fixed_driftmap: Sending telescope to Az = 100.66 and ZA = 15.00 2012-Jan-09 05:47:59 LOG3 track_source: Calling 'track_source AGES1367_p1_053 100.66 14.9962590499 F 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:47:59 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:47:59 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Jan-09 05:47:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_053} INFO {Slewing to source 'AGES1367_p1_053' ...} 2012-Jan-09 05:47:59 INFO1 track_source: Starting to track AGES1367_p1_053 2012-Jan-09 05:47:59 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_053" 2012-Jan-09 05:47:59 LOG3 vw_send: To DATATAKING: set ra 100.66 2012-Jan-09 05:47:59 LOG3 vw_send: To DATATAKING: set dec 14.9962590499 2012-Jan-09 05:47:59 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:47:59 LOG3 vw_send: To DATATAKING: pnt tr 100.66 14.9962590499 -CF 2012-Jan-09 05:47:59 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:47:59 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:47:59 LOG5 finish_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Jan-09 05:47:59 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:47:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:47:59 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:47:59 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2012-Jan-09 05:47:59 START begin_task: Starting task 'rotate ALFA to -77.2 degrees' 2012-Jan-09 05:47:59 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2012-Jan-09 05:47:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to -77.2 degrees ...} 2012-Jan-09 05:47:59 INFO2 rotate_alfa: ALFA commanded to -77.2 degrees 2012-Jan-09 05:47:59 LOG3 sock_errsend: To ALFAMOTOR: POSITION -77.2 REPLY 2012-Jan-09 05:47:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2012-Jan-09 05:47:59 START begin_task: Starting task 'waiting on ALFA rotation' 2012-Jan-09 05:47:59 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_053" 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: set ra 100.66 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: set dec 14.9962590499 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: vw% 100.66 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: vw% 14.9962590499 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: pnt tr 100.66 14.9962590499 -CF 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:47:59 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:48:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2012-Jan-09 05:48:04 INFO3 alfa_motor: ALFA rotator in-position -77.20 degrees 2012-Jan-09 05:48:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2012-Jan-09 05:48:04 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2012-Jan-09 05:48:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:48:04 STOP finish_task: Finishing task 'rotate ALFA to -77.2 degrees' 2012-Jan-09 05:48:04 LOG5 finish_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2012-Jan-09 05:48:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to -77.2 degrees 2012-Jan-09 05:48:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:48:04 STOP end_task: Finishing task 'rotate ALFA to -77.2 degrees' with status 'OK' 2012-Jan-09 05:48:04 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2012-Jan-09 05:48:04 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 05:48:04 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2012-Jan-09 05:48:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 05:48:04 LOG3 waittrk: Start waittrk 5 2012-Jan-09 05:48:04 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 05:48:04 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2012-Jan-09 05:48:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 05:48:09 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2012-Jan-09 05:48:09 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 05:48:09 LOG5 begin_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2012-Jan-09 05:50:20 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 05:50:20 LOG5 end_task: Level: (4) ID = <10327> Status = 0 0 0 0 ok 2012-Jan-09 05:50:20 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:50:20 INFO2 waittrk: Now tracking AGES1367_p1_053 2012-Jan-09 05:50:20 LOG4 waittrk: Current telescope position: Az = 100.40 ZA = 15.01 2012-Jan-09 05:50:20 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 05:50:20 LOG5 finish_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2012-Jan-09 05:50:20 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 05:50:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:50:20 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 05:50:20 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2012-Jan-09 05:50:20 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 05:50:20 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2012-Jan-09 05:50:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 05:50:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 05:50:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:50:20 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 05:50:20 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2012-Jan-09 05:50:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 05:50:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:21 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:50:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 05:50:21 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 05:50:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:50:21 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 05:50:21 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:50:21 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:21 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:50:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:50:21 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:50:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 05:50:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:50:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:50:21 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:50:21 LOG5 begin_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:50:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:50:21 LOG5 end_task: Level: (4) ID = <10331> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:50:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:50:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2012-Jan-09 05:50:21 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG5 dopset_later: Calling 'dopset_later 54.987347408980121' 2012-Jan-09 05:50:21 INFO3 dopset_later: Setting Doppler correction for 05:51:16 (55 seconds from now) 2012-Jan-09 05:50:21 LOG5 antvel: Calling 'antvel 100.660000 14.996259 F Heliocentric 54.987347408980121' 2012-Jan-09 05:50:21 LOG2 antvel: Transforming current Az = 100.66 ZA = 15.00 to apparent RA = 11:34:39.1 Dec = +20:27:44.0 2012-Jan-09 05:50:21 LOG2 antvel: Parameters to Doppler: Heliocentric 35476 2012 9 0.0 2012-Jan-09 05:50:21 INFO5 antvel: Computed antenna velocity: -24.38756 km/s 2012-Jan-09 05:50:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=8500.000000 veltype=velocity(optical) calctype=SUBBAND antvel=-24.387557949400001 restcent=1420.405751786 rest0=1420.405751786 rest1=1420.405751786 rest2=1420.405751786 rest3=1420.405751786 rest4=1420.405751786 rest5=1420.405751786 rest6=1420.405751786 rest7=1420.405751786 2012-Jan-09 05:50:21 INFO4 dopset_gen: New sky frequencies: 1381.355799 1381.355799 1381.355799 1381.355799 1381.355799 1381.355799 1381.355799 1381.355799 1381.355799 2012-Jan-09 05:50:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1381.355799 sky0=1381.355799 sky1=1381.355799 sky2=1381.355799 sky3=1381.355799 sky4=1381.355799 sky5=1381.355799 sky6=1381.355799 sky7=1381.355799 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2012-Jan-09 05:50:21 LOG2 dopset_gen: Result from 'sky2syn': 1631.355799 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2012-Jan-09 05:50:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1631355799.0} 2012-Jan-09 05:50:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 05:50:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making tracking cal before observation} 2012-Jan-09 05:50:21 INFO3 fixed_driftmap: Switching to tracking mode for calibration 2012-Jan-09 05:50:21 INFO5 fixed_driftmap: Tracking J2000 position: RA = 11:33:09.5 Dec = +20:31:43.4 2012-Jan-09 05:50:21 LOG3 track_source: Calling 'track_source AGES1367_p1_053 113309.5 203143.4 J 0.0 0.0 main small {} 8500.0 Heliocentric velocity(optical)' 2012-Jan-09 05:50:21 START begin_task: Starting task 'sending tracking commands' 2012-Jan-09 05:50:21 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Jan-09 05:50:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {AGES1367_p1_053} INFO {Slewing to source 'AGES1367_p1_053' ...} 2012-Jan-09 05:50:21 INFO1 track_source: Starting to track AGES1367_p1_053 2012-Jan-09 05:50:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "AGES1367_p1_053" 2012-Jan-09 05:50:21 LOG3 vw_send: To DATATAKING: set ra 113309.5 2012-Jan-09 05:50:21 LOG3 vw_send: To DATATAKING: set dec 203143.4 2012-Jan-09 05:50:22 LOG3 vw_send: To DATATAKING: pnt tr send 2012-Jan-09 05:50:22 LOG3 vw_send: To DATATAKING: pnt tr 113309.5 203143.4 -CJ 2012-Jan-09 05:50:22 LOG3 vw_send: To DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:50:22 STOP finish_task: Finishing task 'sending tracking commands' 2012-Jan-09 05:50:22 LOG5 finish_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Jan-09 05:50:22 INFO2 finish_task: DONE finished sending: tracking commands 2012-Jan-09 05:50:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:50:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2012-Jan-09 05:50:22 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2012-Jan-09 05:50:22 START begin_task: Starting task 'waiting on telescope' 2012-Jan-09 05:50:22 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Jan-09 05:50:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2012-Jan-09 05:50:22 LOG3 waittrk: Start waittrk 5 2012-Jan-09 05:50:22 START begin_task: Starting task 'waiting on telescope movement' 2012-Jan-09 05:50:22 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1631355799.0} 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "AGES1367_p1_053" 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: set ra 113309.5 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: set dec 203143.4 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 113309.5 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: vw% 203143.4 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: pnt tr 113309.5 203143.4 -CJ 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 8500.0 hel 2012-Jan-09 05:50:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2012-Jan-09 05:50:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2012-Jan-09 05:50:27 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2012-Jan-09 05:50:27 START begin_task: Starting task 'waiting on telescope on source' 2012-Jan-09 05:50:27 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2012-Jan-09 05:50:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2012-Jan-09 05:50:29 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2012-Jan-09 05:50:29 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2012-Jan-09 05:50:29 INFO2 waittrk: Now tracking AGES1367_p1_053 2012-Jan-09 05:50:29 LOG4 waittrk: Current telescope position: Az = 100.38 ZA = 15.02 2012-Jan-09 05:50:29 STOP finish_task: Finishing task 'waiting on telescope' 2012-Jan-09 05:50:29 LOG5 finish_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Jan-09 05:50:29 INFO2 finish_task: DONE finished waiting: telescope on source 2012-Jan-09 05:50:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:50:29 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2012-Jan-09 05:50:29 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2012-Jan-09 05:50:29 START begin_task: Starting task 'adjusting WAPP+Mock power' 2012-Jan-09 05:50:29 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2012-Jan-09 05:50:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP+Mock power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP+Mock power ...} 2012-Jan-09 05:50:29 INFO2 adjust_power: Starting to adjust WAPP+Mock power 2012-Jan-09 05:50:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2012-Jan-09 05:50:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2012-Jan-09 05:50:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:50:29 START begin_task: Starting task 'waiting on adjpwrif2' 2012-Jan-09 05:50:29 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2012-Jan-09 05:50:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2012-Jan-09 05:50:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:50:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:32 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:50:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2012-Jan-09 05:50:32 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2012-Jan-09 05:50:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2012-Jan-09 05:50:32 START begin_task: Starting task 'adjusting WAPP power' 2012-Jan-09 05:50:32 LOG5 begin_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Jan-09 05:50:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 05:50:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:50:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:50:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:50:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2012-Jan-09 05:50:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2012-Jan-09 05:50:32 LOG5 begin_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2012-Jan-09 05:50:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2012-Jan-09 05:50:32 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 6 5 dB --- beam 1: 8 6 dB 2012-Jan-09 05:50:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 0 2 dB --- beam 5: 3 4 dB 2012-Jan-09 05:50:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 2 3 dB 2012-Jan-09 05:50:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2012-Jan-09 05:50:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2012-Jan-09 05:50:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2012-Jan-09 05:50:33 LOG5 end_task: Level: (5) ID = <10339> Status = 0 0 0 0 ok 2012-Jan-09 05:50:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.116 1.089 ALFA beam 1: 0.942 0.917 2012-Jan-09 05:50:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.993 1.034 ALFA beam 3: 1.069 0.915 2012-Jan-09 05:50:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.838 1.083 ALFA beam 5: 1.008 0.917 2012-Jan-09 05:50:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.918 0.014 ALFA beam 7: 1.000 0.014 2012-Jan-09 05:50:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2012-Jan-09 05:50:33 LOG5 finish_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Jan-09 05:50:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2012-Jan-09 05:50:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:50:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2012-Jan-09 05:50:33 LOG5 end_task: Level: (4) ID = <10338> Status = 0 0 0 0 ok 2012-Jan-09 05:50:33 START begin_task: Starting task 'adjusting Mock spectrometer power' 2012-Jan-09 05:50:33 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2012-Jan-09 05:50:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting Mock Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2012-Jan-09 05:50:33 LOG2 socket_wait: Starting sockwait on MOCK for 'adjust Mock spectrometer power' using string 'adjp' 2012-Jan-09 05:50:33 LOG3 socket_wait: To MOCK: ADJP30 2012-Jan-09 05:50:33 START begin_task: Starting task 'waiting on adjust Mock spectrometer power' 2012-Jan-09 05:50:33 LOG5 begin_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2012-Jan-09 05:50:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.014 < 0.75)! 2012-Jan-09 05:50:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.116 1.089 0.942 0.917 2012-Jan-09 05:50:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 1.034 1.069 0.915 2012-Jan-09 05:50:34 LOG4 check_wapp_levels: WAPP-3 power levels: 0.838 1.083 1.008 0.917 2012-Jan-09 05:50:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.014 1.000 0.014 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b0s0g0 rms:A 31.7 27.9 B 30.5 30.6 mn:A 0.0 -0.0 B -0.2 -0.2 gn: 11 11 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b0s1g0 rms:A 29.2 27.9 B 28.7 30.4 mn:A 0.1 -0.5 B -0.5 0.2 gn: 11 11 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b1s0g0 rms:A 31.1 29.1 B 32.8 28.6 mn:A 0.5 0.5 B 0.1 0.1 gn: 7 11 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b1s1g0 rms:A 31.3 28.8 B 31.5 31.6 mn:A -0.2 -0.2 B 0.5 0.1 gn: 8 10 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b2s0g0 rms:A 29.8 28.9 B 28.8 30.1 mn:A 0.1 -0.4 B 0.4 0.1 gn: 10 11 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b2s1g0 rms:A 31.0 31.3 B 30.2 28.1 mn:A 0.4 -0.3 B 0.2 0.3 gn: 11 11 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b3s0g0 rms:A 29.2 28.9 B 31.5 28.1 mn:A 0.4 -0.3 B -0.0 -0.3 gn: 12 12 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b3s1g0 rms:A 30.7 30.0 B 30.3 31.6 mn:A -0.2 0.3 B 0.1 0.3 gn: 12 12 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b4s0g0 rms:A 30.5 29.6 B 31.2 31.4 mn:A -0.2 -0.3 B -0.4 -0.1 gn: 13 12 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b4s1g0 rms:A 32.8 29.7 B 30.5 29.4 mn:A 0.0 0.0 B -0.3 0.2 gn: 16 13 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b5s0g0 rms:A 30.2 29.1 B 28.5 28.4 mn:A 0.7 0.4 B 0.0 0.4 gn: 12 10 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b5s1g0 rms:A 32.0 31.8 B 28.8 28.6 mn:A -0.3 0.2 B 0.1 0.1 gn: 12 10 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b6s0g0 rms:A 29.5 27.1 B 15.3 15.8 mn:A -0.4 0.2 B 0.4 -0.3 gn: 12 31 2012-Jan-09 05:50:40 INFO3 from_mock: From MOCK: b6s1g0 rms:A 31.0 28.2 B 12.3 12.0 mn:A 0.6 0.6 B 0.1 0.2 gn: 13 31 2012-Jan-09 05:50:40 STOP end_task: Finishing task 'waiting on adjust Mock spectrometer power' with status 'OK' 2012-Jan-09 05:50:40 LOG5 end_task: Level: (5) ID = <10341> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 LOG3 socket_wait: DONE with sockwait on MOCK for 'adjust Mock spectrometer power' 2012-Jan-09 05:50:40 STOP finish_task: Finishing task 'adjusting Mock spectrometer power' 2012-Jan-09 05:50:40 LOG5 finish_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 INFO3 finish_task: DONE finished adjusting: Mock spectrometer power 2012-Jan-09 05:50:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:50:40 STOP end_task: Finishing task 'adjusting Mock spectrometer power' with status 'OK' 2012-Jan-09 05:50:40 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2012-Jan-09 05:50:40 STOP finish_task: Finishing task 'adjusting WAPP+Mock power' 2012-Jan-09 05:50:40 LOG5 finish_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 INFO2 finish_task: DONE finished adjusting: WAPP+Mock power levels 2012-Jan-09 05:50:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2012-Jan-09 05:50:40 STOP end_task: Finishing task 'adjusting WAPP+Mock power' with status 'OK' 2012-Jan-09 05:50:40 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2048 Israel cabrera 2012-Jan-09 05:50:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2048 Israel cabrera 2012-Jan-09 05:50:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2048 Israel cabrera 2012-Jan-09 05:50:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2048 Israel cabrera 2012-Jan-09 05:50:40 LOG2 take_cal: Calling 'take_cal hcorcal 5 0' 2012-Jan-09 05:50:40 START begin_task: Starting task 'WAPP+Mock calibration' 2012-Jan-09 05:50:40 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP+Mock Calibration} INFO {Making WAPP+Mock calibration ...} 2012-Jan-09 05:50:40 START begin_task: Starting task 'selecting calibration type' 2012-Jan-09 05:50:40 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2012-Jan-09 05:50:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2012-Jan-09 05:50:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:50:40 START begin_task: Starting task 'waiting on setcal' 2012-Jan-09 05:50:40 LOG5 begin_task: Level: (5) ID = <10344> Status = 0 0 0 0 ok 2012-Jan-09 05:50:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2048 Israel cabrera' 2012-Jan-09 05:50:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2012-Jan-09 05:50:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2012-Jan-09 05:50:40 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:40 LOG4 got_cormsg: From DATATAKING: DONE 2012-Jan-09 05:50:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2012-Jan-09 05:50:40 LOG5 end_task: Level: (5) ID = <10344> Status = 0 0 0 0 ok 2012-Jan-09 05:50:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2012-Jan-09 05:50:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:50:41 LOG3 socket_wait: To ALFAMON: CAL HI 2012-Jan-09 05:50:41 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:50:41 LOG5 begin_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2012-Jan-09 05:50:41 LOG4 got_cormsg: From DATATAKING: vw% 2012-Jan-09 05:50:41 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:50:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:50:41 LOG5 end_task: Level: (5) ID = <10345> Status = 0 0 0 0 ok 2012-Jan-09 05:50:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:50:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2012-Jan-09 05:50:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2012-Jan-09 05:50:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:50:41 START begin_task: Starting task 'waiting on command to ALFA' 2012-Jan-09 05:50:41 LOG5 begin_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2012-Jan-09 05:50:41 LOG4 got_alfamon: From ALFAMON: ACK 2012-Jan-09 05:50:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2012-Jan-09 05:50:41 LOG5 end_task: Level: (5) ID = <10346> Status = 0 0 0 0 ok 2012-Jan-09 05:50:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2012-Jan-09 05:50:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2012-Jan-09 05:50:41 STOP end_task: